mavlink: increase optimization to ${MAX_CUSTOM_OPT_LEVEL}

- MAX_CUSTOM_OPT_LEVEL is -O2 on boards that aren't flash constrained
commander: Only run estimator navigation checks when armed
2026-05-24 02:07:35 +08:00 · 2021-10-29 10:51:30 -04:00 · 2021-10-28 12:06:31 -04:00 · 2021-10-28 11:41:02 -04:00 · 2021-10-28 00:01:37 -04:00 · 2021-10-27 23:00:40 -04:00
2527 changed files with 156710 additions and 46648 deletions
@@ -9,11 +9,10 @@ pipeline {
        script {
          def build_nodes = [:]
          def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2021-04-29",
-            arm64: "px4io/px4-dev-aarch64:2021-04-29",
-            base: "px4io/px4-dev-base-bionic:2021-04-29",
-            nuttx: "px4io/px4-dev-nuttx-focal:2021-04-29",
-            snapdragon: "lorenzmeier/px4-dev-snapdragon:2020-04-01"
+            armhf: "px4io/px4-dev-armhf:2021-09-08",
+            arm64: "px4io/px4-dev-aarch64:2021-09-08",
+            base: "px4io/px4-dev-base-bionic:2021-09-08",
+            nuttx: "px4io/px4-dev-nuttx-focal:2021-09-08",
          ]

          def armhf_builds = [
@@ -39,6 +38,11 @@ pipeline {
                     "airmind_mindpx-v2_default",
                     "ark_can-flow_canbootloader",
                     "ark_can-flow_default",
+                     "ark_can-gps_canbootloader",
+                     "ark_can-gps_default",
+                     "ark_can-rtk-gps_canbootloader",
+                     "ark_can-rtk-gps_default",
+                     "atl_mantis-edu_default",
                     "av_x-v1_default",
                     "bitcraze_crazyflie_default",
                     "bitcraze_crazyflie21_default",
@@ -48,6 +52,8 @@ pipeline {
                     "cuav_x7pro_default",
                     "cubepilot_cubeorange_default",
                     "cubepilot_cubeyellow_default",
+                     "freefly_can-rtk-gps_canbootloader",
+                     "freefly_can-rtk-gps_default",
                     "holybro_can-gps-v1_canbootloader",
                     "holybro_can-gps-v1_default",
                     "holybro_durandal-v1_default",
@@ -55,6 +61,7 @@ pipeline {
                     "holybro_pix32v5_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
+                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
                     "mro_ctrl-zero-h7_default",
@@ -69,24 +76,18 @@ pipeline {
                     "nxp_fmuk66-v3_rtps",
                     "nxp_fmuk66-v3_socketcan",
                     "nxp_fmurt1062-v1_default",
-                     "nxp_ucans32k146_default",
                     "nxp_ucans32k146_canbootloader",
+                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
-                     "px4_fmu-v4_cannode",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_ctrlalloc",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_fixedwing",
-                     "px4_fmu-v5_multicopter",
-                     "px4_fmu-v5_optimized",
-                     "px4_fmu-v5_rover",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
@@ -103,14 +104,8 @@ pipeline {
            archive: true
          ]

-          def snapdragon_builds = [
-            target: ["atlflight_eagle_qurt", "atlflight_eagle_default"],
-            image: docker_images.snapdragon,
-            archive: false
-          ]
-
          def docker_builds = [
-            armhf_builds, base_builds, nuttx_builds_archive//, snapdragon_builds
+            armhf_builds, base_builds, nuttx_builds_archive
          ]

          for (def build_type = 0; build_type < docker_builds.size(); build_type++) {
@@ -130,7 +125,7 @@ pipeline {
    // TODO: actually upload artifacts to S3
    // stage('S3 Upload') {
    //   agent {
-    //     docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+    //     docker { image 'px4io/px4-dev-base-focal:2021-09-08' }
    //   }
    //   options {
    //         skipDefaultCheckout()
@@ -155,18 +150,14 @@ pipeline {
  }
  options {
    buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
-    timeout(time: 60, unit: 'MINUTES')
+    timeout(time: 90, unit: 'MINUTES')
  }
 }

 def createBuildNode(Boolean archive, String docker_image, String target) {
  return {

-    // TODO: fix the snapdragon image
    bypass_entrypoint = ''
-    if (docker_image == 'lorenzmeier/px4-dev-snapdragon:2020-04-01') {
-      bypass_entrypoint = ' --entrypoint=""'
-    }

    node {
      docker.withRegistry('https://registry.hub.docker.com', 'docker_hub_dagar') {
@@ -74,6 +74,7 @@ Checks:          '*,
                  -modernize-deprecated-headers,
                  -modernize-loop-convert,
                  -modernize-pass-by-value,
+                  -modernize-raw-string-literal,
                  -modernize-return-braced-init-list,
                  -modernize-use-auto,
                  -modernize-use-bool-literals,
@@ -81,6 +82,7 @@ Checks:          '*,
                  -modernize-use-equals-default,
                  -modernize-use-equals-delete,
                  -modernize-use-override,
+                  -modernize-use-trailing-return-type,
                  -modernize-use-using,
                  -performance-inefficient-string-concatenation,
                  -readability-avoid-const-params-in-decls,
@@ -2,7 +2,7 @@
 // https://github.com/microsoft/vscode-dev-containers/tree/v0.134.0/containers/cpp
 {
 	"name": "px4-dev-nuttx",
-	"image": "px4io/px4-dev-nuttx-focal:2021-04-29",
+	"image": "px4io/px4-dev-nuttx-focal:2021-09-08",

 	"runArgs": [ "--cap-add=SYS_PTRACE", "--security-opt", "seccomp=unconfined" ],

@@ -4,7 +4,7 @@ about: Suggest an idea for this project

 ---

-For general questions please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/).
+For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

 **Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
@@ -0,0 +1,24 @@
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="90" height="20">
+  <linearGradient id="smooth" x2="0" y2="100%">
+    <stop offset="0" stop-color="#bbb" stop-opacity=".1"/>
+    <stop offset="1" stop-opacity=".1"/>
+  </linearGradient>
+
+  <mask id="round">
+    <rect width="90" height="20" rx="3" fill="#fff"/>
+  </mask>
+
+  <g mask="url(#round)">
+    <rect width="42" height="20" fill="#555"/>
+    <rect x="42" width="48" height="20" fill="#E01563"/>
+    <rect width="90" height="20" fill="url(#smooth)"/>
+  </g>
+
+  <g fill="#fff" text-anchor="middle" font-family="DejaVu Sans,Verdana,Geneva,sans-serif" font-size="11">
+    <text x="22" y="15" fill="#010101" fill-opacity=".3">slack</text>
+    <text x="22" y="14">slack</text>
+    <text x="65" y="15" fill="#010101" fill-opacity=".3">Join us!</text>
+    <text x="65" y="14">Join us!</text>
+  </g>
+</svg>
+
@@ -23,39 +23,19 @@ jobs:
          "shellcheck_all",
          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
          "NO_NINJA_BUILD=1 px4_sitl_default",
+          "BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
          "airframe_metadata",
          "module_documentation",
          "parameters_metadata",
        ]
    container:
-      image: ghcr.io/px4/px4-dev:2021-05-06
+      image: px4io/px4-dev-nuttx-focal:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
    - uses: actions/checkout@v1
      with:
        token: ${{ secrets.ACCESS_TOKEN }}

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: tests_${{matrix.ubuntu_release}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: tests_${{matrix.ubuntu_release}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
    - name: check environment
      run: |
          export
@@ -11,36 +11,11 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-clang:2021-04-29
+    container: px4io/px4-dev-clang:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
        token: ${{secrets.ACCESS_TOKEN}}

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: clang-tidy-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: clang-tidy-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
    - name: make clang-tidy-quiet
-      run: |
-        ccache -z
-        make clang-tidy-quiet
-        ccache -s
+      run: make clang-tidy-quiet
@@ -11,7 +11,7 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-armhf:2021-04-29
+    container: px4io/px4-dev-armhf:2021-09-08
    strategy:
      matrix:
        config: [
@@ -42,8 +42,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -11,7 +11,7 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-aarch64:2021-04-29
+    container: px4io/px4-dev-aarch64:2021-09-08
    strategy:
      matrix:
        config: [
@@ -39,8 +39,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -43,8 +43,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 40M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -4,7 +4,6 @@ on:
  push:
    branches:
    - 'master'
-    - 'github-actions'
  pull_request:
    branches:
    - '*'
@@ -12,78 +11,53 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-nuttx-focal:2021-09-08
    strategy:
+      fail-fast: false
      matrix:
        config: [
-          airmind_mindpx-v2_default,
-          ark_can-flow_canbootloader,
-          ark_can-flow_debug,
-          ark_can-flow_default,
-          av_x-v1_default,
-          bitcraze_crazyflie21_default,
-          bitcraze_crazyflie_default,
-          cuav_can-gps-v1_canbootloader,
-          cuav_can-gps-v1_debug,
-          cuav_can-gps-v1_default,
-          cuav_nora_default,
-          cuav_x7pro_default,
-          cubepilot_cubeorange_default,
-          cubepilot_cubeorange_test,
-          cubepilot_cubeyellow_default,
-          cubepilot_cubeyellow_test,
-          cubepilot_io-v2_default,
-          holybro_can-gps-v1_canbootloader,
-          holybro_can-gps-v1_debug,
-          holybro_can-gps-v1_default,
-          holybro_durandal-v1_default,
-          holybro_kakutef7_default,
-          holybro_pix32v5_default,
-          modalai_fc-v1_default,
-          modalai_fc-v1_rtps,
-          mro_ctrl-zero-f7-oem_default,
-          mro_ctrl-zero-f7_default,
-          mro_ctrl-zero-h7-oem_default,
-          mro_ctrl-zero-h7_default,
-          mro_pixracerpro_default,
-          mro_x21-777_default,
-          mro_x21_default,
-          nxp_fmuk66-e_default,
-          nxp_fmuk66-e_rtps,
-          nxp_fmuk66-e_socketcan,
-          nxp_fmuk66-v3_default,
-          nxp_fmuk66-v3_rtps,
-          nxp_fmuk66-v3_socketcan,
-          nxp_fmurt1062-v1_default,
-          nxp_ucans32k146_canbootloader,
-          nxp_ucans32k146_default,
-          omnibus_f4sd_default,
-          px4_fmu-v2_default,
-          px4_fmu-v2_fixedwing,
-          px4_fmu-v2_multicopter,
-          px4_fmu-v2_rover,
-          px4_fmu-v3_default,
-          px4_fmu-v4_cannode,
-          px4_fmu-v4_default,
-          px4_fmu-v4pro_default,
-          px4_fmu-v5_ctrlalloc,
-          px4_fmu-v5_debug,
-          px4_fmu-v5_default,
-          px4_fmu-v5_fixedwing,
-          px4_fmu-v5_multicopter,
-          px4_fmu-v5_optimized,
-          px4_fmu-v5_rover,
-          px4_fmu-v5_rtps,
-          px4_fmu-v5_stackcheck,
-          px4_fmu-v5_uavcanv0periph,
-          px4_fmu-v5_uavcanv1,
-          px4_fmu-v5x_base_phy_DP83848C,
-          px4_fmu-v5x_default,
-          px4_fmu-v6u_default,
-          px4_fmu-v6x_default,
-          px4_io-v2_default,
-          spracing_h7extreme_default,
-          uvify_core_default
+          airmind_mindpx-v2,
+          ark_can-flow,
+          ark_can-gps,
+          ark_can-rtk-gps,
+          atl_mantis-edu,
+          av_x-v1,
+          bitcraze_crazyflie,
+          bitcraze_crazyflie21,
+          cuav_can-gps-v1,
+          cuav_nora,
+          cuav_x7pro,
+          cubepilot_cubeorange,
+          cubepilot_cubeyellow,
+          freefly_can-rtk-gps,
+          holybro_can-gps-v1,
+          holybro_durandal-v1,
+          holybro_kakutef7,
+          holybro_pix32v5,
+          modalai_fc-v1,
+          modalai_fc-v2,
+          mro_ctrl-zero-f7,
+          mro_ctrl-zero-f7-oem,
+          mro_ctrl-zero-h7,
+          mro_ctrl-zero-h7-oem,
+          mro_pixracerpro,
+          mro_x21,
+          mro_x21-777,
+          nxp_fmuk66-e,
+          nxp_fmuk66-v3,
+          nxp_fmurt1062-v1,
+          nxp_ucans32k146,
+          omnibus_f4sd,
+          px4_fmu-v2,
+          px4_fmu-v3,
+          px4_fmu-v4,
+          px4_fmu-v4pro,
+          px4_fmu-v5,
+          px4_fmu-v5x,
+          px4_fmu-v6u,
+          px4_fmu-v6x,
+          spracing_h7extreme,
+          uvify_core
          ]
    steps:
    - uses: actions/checkout@v1
@@ -107,13 +81,15 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
+    - name: make all_variants_${{matrix.config}}
+      run: make all_variants_${{matrix.config}}
+      timeout-minutes: 45
    - name: make ${{matrix.config}} bloaty_compileunits
      run: make ${{matrix.config}} bloaty_compileunits || true
    - name: make ${{matrix.config}} bloaty_inlines
@@ -132,7 +108,9 @@ jobs:
      run: ccache -s

    - name: Upload px4 package
-      uses: actions/upload-artifact@v1
+      uses: actions/upload-artifact@v2
      with:
        name: px4_package_${{matrix.config}}
-        path: build/${{matrix.config}}/${{matrix.config}}.px4
+        path: |
+          build/**/*.px4
+          build/**/*.bin
@@ -1,61 +0,0 @@
-name: NuttX UAVCAN firmware
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
-    strategy:
-      matrix:
-        config: [
-          ark_can-flow_default,
-          cuav_can-gps-v1_default,
-          holybro_can-gps-v1_default,
-          #nxp_ucans32k146_default,
-          px4_fmu-v4_cannode
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-
-    - name: ccache post-run
-      run: ccache -s
-
-    - name: Upload px4 package
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_cannode_${{matrix.config}}
-        path: build/${{matrix.config}}/*.uavcan.bin
@@ -1,31 +0,0 @@
-name: Build and publish Docker image
-
-on:
-  push:
-    branches:
-    - 'master'
-    - 'github-actions'
-
-jobs:
-  docker:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Login to GitHub Container Registry
-        uses: docker/login-action@v1
-        with:
-          registry: ghcr.io
-          username: ${{ github.repository_owner }}
-          password: ${{ secrets.GITHUB_TOKEN }}
-
-      - name: Build and push
-        uses: docker/build-push-action@v2
-        with:
-          context: .
-          platforms: linux/amd64
-          push: true
-          tags: |
-            px4/px4-dev:latest
-            ghcr.io/px4/px4-dev:latest
-
-      - name: Image digest
-        run: echo ${{ steps.docker_build.outputs.digest }}
@@ -10,6 +10,7 @@ on:
 jobs:
  enumerate_targets:
    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
    outputs:
      matrix: ${{ steps.set-matrix.outputs.matrix }}
    steps:
@@ -23,46 +24,22 @@ jobs:
    needs: enumerate_targets
    strategy:
      matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
-    container: px4io/px4-dev-${{ matrix.container }}:2021-04-29
+    container: px4io/px4-dev-${{ matrix.container }}:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
        token: ${{secrets.ACCESS_TOKEN}}

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.target}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.target}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
    - name: make ${{matrix.target}}
      run: make ${{matrix.target}}
-    - name: ccache post-run
-      run: ccache -s

-    - name: parameter metadata
+    - name: parameter & events metadata
      run: |
-        make ${{matrix.target}} ver_gen
+        make ${{matrix.target}} ver_gen events_json
        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
        cd build/${{ matrix.target }}
        mkdir _metadata || true
-        cp parameters.* _metadata
+        cp parameters.* events/*.xz _metadata

    - uses: jakejarvis/s3-sync-action@master
      with:
@@ -0,0 +1,21 @@
+name: EKF Change Indicator
+
+on: pull_request
+
+jobs:
+  unit_tests:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v2.3.1
+      with:
+        fetch-depth: 0
+    - name: checkout newest version of branch
+      run: |
+        git fetch origin pull/${{github.event.pull_request.number}}/head:${{github.head_ref}}
+        git checkout ${GITHUB_HEAD_REF}
+    - name: main test
+      run: make tests TESTFILTER=EKF
+    - name: Check if there is a functional change
+      run: git diff --exit-code
+      working-directory: src/modules/ekf2/test/change_indication
@@ -0,0 +1,29 @@
+name: EKF Update Change Indicator
+
+on: push
+
+jobs:
+  unit_tests:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    env:
+      GIT_COMMITTER_EMAIL: bot@px4.io
+      GIT_COMMITTER_NAME: PX4BuildBot
+    steps:
+    - uses: actions/checkout@v2.3.1
+      with:
+        fetch-depth: 0
+    - name: main test updates change indication files
+      run: make tests TESTFILTER=EKF
+    - name: Check if there exists diff and save result in variable
+      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_ENV
+      working-directory: src/modules/ekf2/test/change_indication
+    - name: auto-commit any changes to change indication
+      uses: stefanzweifel/git-auto-commit-action@v4
+      with:
+        commit_message: '[AUTO COMMIT] update change indication'
+        commit_user_name: ${GIT_COMMITTER_NAME}
+        commit_user_email: ${GIT_COMMITTER_EMAIL}
+    - if: ${{env.CHANGE_INDICATED}}
+      name: if there is a functional change, fail check
+      run: exit 1
@@ -25,7 +25,7 @@ jobs:
          #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}

    container:
-      image: px4io/px4-dev-ros-melodic:2021-04-29
+      image: px4io/px4-dev-ros-melodic:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
    - uses: actions/checkout@v1
@@ -49,8 +49,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -78,6 +79,7 @@ jobs:
      run: |
        export
        ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45

    - name: Look at core files
      if: failure()
@@ -20,7 +20,7 @@ jobs:
          #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}

    container:
-      image: px4io/px4-dev-ros-melodic:2021-04-29
+      image: px4io/px4-dev-ros-melodic:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
    - uses: actions/checkout@v1
@@ -44,8 +44,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -73,6 +74,7 @@ jobs:
      run: |
        export
        ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45

    - name: Look at core files
      if: failure()
@@ -11,7 +11,7 @@ jobs:

  airframe:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
@@ -20,13 +20,24 @@ jobs:
    - name: airframe metadata
      run: |
        make airframe_metadata
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
        cd build/px4_sitl_default/docs
-        ls -ls *
-      # TODO: deploy to userguide gitbook and s3
+      # TODO: deploy to userguide gitbook
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'

  module:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
@@ -41,7 +52,7 @@ jobs:

  parameter:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
@@ -63,9 +74,36 @@ jobs:
        SOURCE_DIR: 'build/px4_sitl_default/docs/'
        DEST_DIR: 'Firmware/${{ env.version }}/_general/'

+  events:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-base-focal:2021-09-08
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}
+
+    - name: events metadata
+      run: |
+        make extract_events
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+        cd build/px4_sitl_default
+        mkdir _events_full || true
+        cp events/all_events_full.json.xz _events_full/all_events.json.xz
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/_events_full/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
+
  uorb_graph:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-nuttx-focal:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
@@ -80,7 +118,7 @@ jobs:

  micrortps_agent:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
@@ -94,7 +132,7 @@ jobs:

  ROS_msgs:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
@@ -107,7 +145,7 @@ jobs:

  ROS2_bridge:
    runs-on: ubuntu-latest
-    container: ghcr.io/px4/px4-dev:2021-05-06
+    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
    - uses: actions/checkout@v1
      with:
@@ -116,4 +154,4 @@ jobs:
    - name: PX4 ROS2 bridge
      run: |
        git clone https://github.com/PX4/px4_ros_com.git
-        ./msg/tools/uorb_to_ros_rtps_ids.py -i msg/tools/uorb_rtps_message_ids.yaml -o px4_ros_com/templates/uorb_rtps_message_ids.yaml
+        ./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml
@@ -18,7 +18,7 @@ jobs:
    - name: Install Python3
      run: sudo apt-get install python3 python3-setuptools python3-pip -y
    - name: Install tools
-      run: pip3 install --user mypy flake8
+      run: pip3 install --user mypy types-requests flake8
    - name: Check MAVSDK test scripts with mypy
      run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
    - name: Check MAVSDK test scripts with flake8
@@ -15,12 +15,13 @@ jobs:
      fail-fast: false
      matrix:
        config:
-          - {latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo", model: "iris"          } # Alaska
-          - {latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "RelWithDebInfo", model: "standard_vtol" } # Australia
-          - {latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo", model: "tailsitter"    } # Florida
-          - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",       model: "standard_vtol" } # Zurich
+          - {latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo",   model: "iris"          } # Alaska
+          - {latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer", model: "standard_vtol" } # Australia
+          - {latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo",   model: "tailsitter"    } # Florida
+          - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",         model: "standard_vtol" } # Zurich
+
    container:
-      image: px4io/px4-dev-simulation-focal:2021-04-29
+      image: px4io/px4-dev-simulation-focal:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
    - uses: actions/checkout@v1
@@ -49,8 +50,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -95,6 +97,7 @@ jobs:
        PX4_HOME_ALT: ${{matrix.config.altitude}}
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json
+      timeout-minutes: 45

    - name: Look at core files
      if: failure()
@@ -108,3 +108,5 @@ src/systemcmds/topic_listener/listener_generated.cpp
 # SITL
 dataman
 eeprom/
+
+!src/drivers/distance_sensor/broadcom/afbrs50/Lib/*
@@ -18,14 +18,6 @@
 	path = src/lib/matrix
 	url = https://github.com/PX4/PX4-Matrix.git
 	branch = master
-[submodule "src/lib/ecl"]
-	path = src/lib/ecl
-	url = https://github.com/PX4/PX4-ECL.git
-	branch = master
-[submodule "boards/atlflight/cmake_hexagon"]
-	path = boards/atlflight/cmake_hexagon
-	url = https://github.com/PX4/cmake_hexagon.git
-	branch = px4
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
 	url = https://github.com/PX4/PX4-GPSDrivers.git
@@ -37,14 +29,11 @@
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.0.0+
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
 	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.0.0+
-[submodule "platforms/qurt/dspal"]
-	path = platforms/qurt/dspal
-	url = https://github.com/ATLFlight/dspal.git
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
@@ -65,5 +54,23 @@
 	url = https://github.com/UAVCAN/libcanard.git
 [submodule "src/drivers/uavcan_v1/legacy_data_types"]
 	path = src/drivers/uavcan_v1/legacy_data_types
-	url = https://github.com/px4/public_regulated_data_types/
+	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
+[submodule "src/lib/crypto/monocypher"]
+	path = src/lib/crypto/monocypher
+	url = https://github.com/PX4/Monocypher.git
+	branch = px4
+[submodule "src/lib/events/libevents"]
+	path = src/lib/events/libevents
+	url = https://github.com/mavlink/libevents.git
+[submodule "Tools/simulation-ignition"]
+	path = Tools/simulation-ignition
+	url = https://github.com/Auterion/px4-simulation-ignition.git
+[submodule "src/lib/crypto/libtomcrypt"]
+	path = src/lib/crypto/libtomcrypt
+	url = https://github.com/PX4/libtomcrypt.git
+	branch = px4
+[submodule "src/lib/crypto/libtommath"]
+	path = src/lib/crypto/libtommath
+	url = https://github.com/PX4/libtommath.git
+	branch = px4
@@ -6,6 +6,21 @@ CONFIG:
      buildType: RelWithDebInfo
      settings:
        CONFIG: px4_sitl_default
+    px4_sitl_rtps:
+      short: px4_sitl_rtps
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_rtps
+    px4_sitl_asan:
+      short: px4_sitl (AddressSanitizer)
+      buildType: AddressSanitizer
+      settings:
+        CONFIG: px4_sitl_default
+    px4_sitl_ubsan:
+      short: px4_sitl (UndefinedBehaviorSanitizer)
+      buildType: UndefinedBehaviorSanitizer
+      settings:
+        CONFIG: px4_sitl_default
    px4_sitl_replay:
      short: px4_sitl_replay
      buildType: RelWithDebInfo
@@ -51,6 +66,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: px4_fmu-v5x_default
+    px4_fmu-v6x_default:
+      short: px4_fmu-v6x
+      buildType: MinSizeRel
+      settings:
+        CONFIG: px4_fmu-v6x_default
+    px4_fmu-v6x_bootloader:
+      short: px4_fmu-v6x_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: px4_fmu-v6x_bootloader
    airmind_mindpx-v2_default:
      short: airmind_mindpx-v2
      buildType: MinSizeRel
@@ -66,6 +91,36 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-flow_canbootloader
+    ark_can-gps_default:
+      short: ark_can-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-gps_default
+    ark_can-gps_canbootloader:
+      short: ark_can-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-gps_canbootloader
+    ark_can-rtk-gps_default:
+      short: ark_can-rtk-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-rtk-gps_default
+    ark_can-rtk-gps_debug:
+      short: ark_can-rtk-gps_debug
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-rtk-gps_debug
+    ark_can-rtk-gps_canbootloader:
+      short: ark_can-rtk-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-rtk-gps_canbootloader
+    atl_mantis-edu_default:
+      short: atl_mantis-edu
+      buildType: MinSizeRel
+      settings:
+        CONFIG: atl_mantis-edu_default
    av_x-v1_default:
      short: av_x-v1
      buildType: MinSizeRel
@@ -106,6 +161,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: emlid_navio2_default
+    freefly_can-rtk-gps_default:
+      short: freefly_can-rtk-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: freefly_can-rtk-gps_default
+    freefly_can-rtk-gps_canbootloader:
+      short: freefly_can-rtk-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: freefly_can-rtk-gps_canbootloader
    holybro_can-gps-v1_canbootloader:
      short: holybro_can-gps-v1_canbootloader
      buildType: MinSizeRel
@@ -126,6 +191,11 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: modalai_fc-v1_default
+    modalai_fc-v2_default:
+      short: modalai_fc-v2
+      buildType: MinSizeRel
+      settings:
+        CONFIG: modalai_fc-v2_default
    mro_ctrl-zero-f7_default:
      short: mro_ctrl-zero-f7
      buildType: MinSizeRel
@@ -31,7 +31,6 @@
                "esc"
        ],
        "debug.toolBarLocation": "docked",
-        "editor.acceptSuggestionOnEnter": "off",
        "editor.defaultFormatter": "chiehyu.vscode-astyle",
        "editor.dragAndDrop": false,
        "editor.insertSpaces": false,
@@ -129,6 +129,10 @@ define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
                 )
+define_property(GLOBAL PROPERTY PX4_SRC_FILES
+                 BRIEF_DOCS "src files from all PX4 modules & libs"
+                 FULL_DOCS "SRC files from px4_add_{module,library}"
+                 )

 #=============================================================================
 # configuration
@@ -139,12 +143,33 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
 include(px4_add_module)
 set(config_module_list)

+# Find Python
+# If using catkin, Python 2 is found since it points
+# to the Python libs installed with the ROS distro
+if (NOT CATKIN_DEVEL_PREFIX)
+	find_package(PythonInterp 3)
+	# We have a custom error message to tell users how to install python3.
+	if (NOT PYTHONINTERP_FOUND)
+		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+			"    macOS: brew install python")
+	endif()
+else()
+	find_package(PythonInterp REQUIRED)
+endif()
+
+option(PYTHON_COVERAGE "Python code coverage" OFF)
+if(PYTHON_COVERAGE)
+	message(STATUS "python coverage enabled")
+	set(PYTHON_EXECUTABLE coverage run -p)
+endif()
+
 include(px4_config)
-include(px4_add_board)
-include(${PX4_CONFIG_FILE})
+include(kconfig)
 message(STATUS "PX4 config: ${PX4_CONFIG}")
 message(STATUS "PX4 platform: ${PX4_PLATFORM}")

+
 if(${PX4_PLATFORM} STREQUAL "posix")
 	if(ENABLE_LOCKSTEP_SCHEDULER)
 		add_definitions(-DENABLE_LOCKSTEP_SCHEDULER)
@@ -279,27 +304,6 @@ if (CATKIN_DEVEL_PREFIX)
 	endif()
 endif()

-# Python
-# If using catkin, Python 2 is found since it points
-# to the Python libs installed with the ROS distro
-if (NOT CATKIN_DEVEL_PREFIX)
-	find_package(PythonInterp 3)
-	# We have a custom error message to tell users how to install python3.
-	if (NOT PYTHONINTERP_FOUND)
-		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-			"    macOS: brew install python")
-	endif()
-else()
-	find_package(PythonInterp REQUIRED)
-endif()
-
-option(PYTHON_COVERAGE "Python code coverage" OFF)
-if(PYTHON_COVERAGE)
-	message(STATUS "python coverage enabled")
-	set(PYTHON_EXECUTABLE coverage run -p)
-endif()
-
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -417,6 +421,9 @@ foreach(module ${config_module_list})
 	add_subdirectory(src/${module})
 endforeach()

+# add events lib after modules and libs as it needs to know all source files (PX4_SRC_FILES)
+add_subdirectory(src/lib/events EXCLUDE_FROM_ALL)
+
 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
 target_link_libraries(parameters_interface INTERFACE parameters)
@@ -436,8 +443,10 @@ endforeach()

 add_custom_command(OUTPUT ${uorb_graph_config}
 	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
-		${graph_module_list}
+		${graph_module_list} --src-path src/lib
+		--merge-depends
 		--exclude-path src/examples
+		--exclude-path src/lib/parameters # FIXME: enable & fix
 		--file ${PX4_SOURCE_DIR}/Tools/uorb_graph/graph_${uorb_graph_config}
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	COMMENT "Generating uORB graph"
@@ -1,29 +0,0 @@
-#
-# PX4 development environment
-#
-
-FROM ubuntu:20.04
-LABEL maintainer="Daniel Agar <daniel@agar.ca>"
-
-COPY Tools/setup/ubuntu.sh /tmp/ubuntu.sh
-COPY Tools/setup/requirements.txt /tmp/requirements.txt
-RUN DEBIAN_FRONTEND=noninteractive /tmp/ubuntu.sh --no-sim-tools \
-	&& apt-get -y autoremove \
-	&& apt-get clean autoclean \
-	&& rm -rf /var/lib/apt/lists/{apt,dpkg,cache,log} /tmp/* /var/tmp/*
-
-# create user with id 1001 (jenkins docker workflow default)
-RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
-
-ENV CCACHE_UMASK=000
-ENV PATH="/usr/lib/ccache:$PATH"
-
-# SITL UDP PORTS
-EXPOSE 14556/udp
-EXPOSE 14557/udp
-
-# create and start as LOCAL_USER_ID
-COPY Tools/setup/entrypoint.sh /usr/local/bin/entrypoint.sh
-ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
-
-CMD ["/bin/bash"]
@@ -15,7 +15,7 @@ pipeline {
        // stage('Catkin build on ROS workspace') {
        //   agent {
        //     docker {
-        //       image 'px4io/px4-dev-ros-melodic:2021-04-29'
+        //       image 'px4io/px4-dev-ros-melodic:2021-08-18'
        //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
        //     }
        //   }
@@ -56,7 +56,7 @@ pipeline {
        stage('Colcon build on ROS2 workspace') {
          agent {
            docker {
-              image 'px4io/px4-dev-ros2-foxy:2021-04-29'
+              image 'px4io/px4-dev-ros2-foxy:2021-08-18'
              args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
            }
          }
@@ -85,7 +85,7 @@ pipeline {

        stage('Airframe') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh 'make distclean'
@@ -105,7 +105,7 @@ pipeline {

        stage('Parameter') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh 'make distclean'
@@ -125,7 +125,7 @@ pipeline {

        stage('Module') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh 'make distclean'
@@ -143,10 +143,28 @@ pipeline {
          }
        }

+        stage('msg file docs') {
+          agent {
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+          }
+          steps {
+            sh 'mkdir -p build/msg_docs; ./msg/tools/generate_msg_docs.py -d build/msg_docs'
+            dir('build') {
+              archiveArtifacts(artifacts: 'msg_docs/*.md')
+              stash includes: 'msg_docs/*.md', name: 'msg_documentation'
+            }
+          }
+          post {
+            always {
+              sh 'make distclean'
+            }
+          }
+        }
+
        stage('uORB graphs') {
          agent {
            docker {
-              image 'px4io/px4-dev-nuttx-focal:2021-04-29'
+              image 'px4io/px4-dev-nuttx-focal:2021-08-18'
              args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
            }
          }
@@ -156,8 +174,8 @@ pipeline {
            sh 'git fetch --all --tags'
            sh 'make uorb_graphs'
            dir('Tools/uorb_graph') {
-              archiveArtifacts(artifacts: 'graph_px4_sitl.json')
-              stash includes: 'graph_px4_sitl.json', name: 'uorb_graph'
+              archiveArtifacts(artifacts: 'graph_*.json')
+              stash includes: 'graph_*.json', name: 'uorb_graph'
            }
          }
          post {
@@ -176,18 +194,22 @@ pipeline {

        stage('Userguide') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
            unstash 'metadata_airframes'
            unstash 'metadata_parameters'
            unstash 'metadata_module_documentation'
+            unstash 'msg_documentation'
+            unstash 'uorb_graph'
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_user_guide.git')
              sh('cp airframes.md px4_user_guide/en/airframes/airframe_reference.md')
              sh('cp parameters.md px4_user_guide/en/advanced_config/parameter_reference.md')
              sh('cp -R modules/*.md px4_user_guide/en/modules/')
+              sh('cp -R graph_*.json px4_user_guide/.vuepress/public/en/middleware/')
+              sh('cp -R msg_docs/*.md px4_user_guide/en/msg_docs/')
              sh('cd px4_user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
              sh('cd px4_user_guide; git push origin master || true')
              sh('rm -rf px4_user_guide')
@@ -206,7 +228,7 @@ pipeline {

        stage('QGroundControl') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -234,7 +256,7 @@ pipeline {

        stage('microRTPS agent') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -264,7 +286,7 @@ pipeline {

        stage('PX4 ROS msgs') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -293,7 +315,7 @@ pipeline {

        stage('PX4 ROS2 bridge') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -301,7 +323,7 @@ pipeline {
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
              // deploy uORB RTPS ID map
-              sh('./msg/tools/uorb_to_ros_rtps_ids.py -i msg/tools/uorb_rtps_message_ids.yaml -o px4_ros_com/templates/uorb_rtps_message_ids.yaml')
+              sh('./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml')
              sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS ID map `date`" || true')
              sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
              // deploy uORB RTPS required tools
@@ -336,7 +358,7 @@ pipeline {

        stage('S3') {
          agent {
-            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -374,7 +396,7 @@ pipeline {
    GIT_COMMITTER_NAME = "PX4BuildBot"
  }
  options {
-    buildDiscarder(logRotator(numToKeepStr: '10', artifactDaysToKeepStr: '20'))
-    timeout(time: 60, unit: 'MINUTES')
+    buildDiscarder(logRotator(numToKeepStr: '20', artifactDaysToKeepStr: '30'))
+    timeout(time: 90, unit: 'MINUTES')
  }
 }
@@ -0,0 +1,188 @@
+# PX4 Firmware Configuration
+
+
+mainmenu "PX4 Firmware Configuration"
+
+comment "Vendor: $(VENDOR)"
+comment "Model: $(MODEL)"
+comment "Label: $(LABEL)"
+
+menu "Toolchain"
+    choice
+        prompt "Platform"
+        default PLATFORM_NUTTX
+        config PLATFORM_NUTTX
+            bool "nuttx"
+        config PLATFORM_POSIX
+            bool "posix"
+        config PLATFORM_QURT
+            bool "qurt"
+    endchoice
+
+    config BOARD_PLATFORM
+        string
+        default "nuttx" if PLATFORM_NUTTX
+        default "posix" if PLATFORM_POSIX
+        default "qurt" if PLATFORM_QURT
+
+    config BOARD_LOCKSTEP
+        bool "Force enable lockstep"
+        depends on PLATFORM_POSIX
+        help
+            forces lockstep behaviour, despite REPLAY env variable
+
+    config BOARD_NOLOCKSTEP
+        bool "Force disable lockstep"
+        depends on PLATFORM_POSIX
+        help
+            forces nolockstep behaviour, despite REPLAY env variable
+
+    config BOARD_LINUX
+        bool "Linux OS"
+        depends on PLATFORM_POSIX
+        help
+            Board Platform is running the Linux operating system
+
+    config BOARD_TOOLCHAIN
+        string "Toolchain"
+        default ""
+
+    config BOARD_ARCHITECTURE
+        string "Architecture"
+        default ""
+
+    config BOARD_FULL_OPTIMIZATION
+        bool "Full optmization (O3)"
+        default n
+        help
+            Enables Cmake Release for -O3 optimization
+
+    config BOARD_ROMFSROOT
+        string "ROMFSROOT"
+        default "px4fmu_common"
+        help
+            relative path to the ROMFS root directory
+
+    config BOARD_BUILD_BOOTLOADER
+        bool "Enable bootloader"
+        help
+            flag to enable building and including the bootloader config
+
+    config BOARD_IO
+        string "IO board name"
+        help
+            name of IO board to be built and included in the ROMFS (requires a valid ROMFSROOT)
+
+    config BOARD_CONSTRAINED_FLASH
+        bool "Contrained flash"
+        help
+            flag to enable constrained flash options (eg limit init script status text)
+
+    config BOARD_NO_HELP
+        bool "No help"
+        help
+            optional condition flag to disable help text on constrained flash systems
+
+    config BOARD_CONSTRAINED_MEMORY
+        bool "Contrained memory"
+        help
+            flag to enable constrained memory options (eg limit maximum number of uORB publications)
+
+    config BOARD_EXTERNAL_METADATA
+        bool "External metadata"
+        help
+            flag to exclude metadata to reduce flash
+
+    config BOARD_LINKER_PREFIX
+        string "linker prefix"
+        help
+            optional to prefix on the Linker script.
+
+    config BOARD_COMPILE_DEFINITIONS
+        string "add custom compile definitions"
+        help
+            add custom compile defitions to this specific target
+endmenu #Toolchain
+
+config BOARD_TESTING
+    bool "Testing"
+    select SYSTEMCMDS_TESTS
+    help
+        flag to enable automatic inclusion of PX4 testing modules
+
+
+config BOARD_ETHERNET
+    bool "Ethernet"
+    help
+        flag to indicate that ethernet is enabled
+
+config BOARD_CRYPTO
+    string "Crypto"
+    help
+        Crypto implementation selection
+
+config BOARD_KEYSTORE
+    string "Keystore"
+    help
+        Keystore implememntation selection
+
+menu "Serial ports"
+
+    config BOARD_SERIAL_URT6
+        string "URT6 tty port"
+
+    config BOARD_SERIAL_GPS1
+        string "GPS1 tty port"
+
+    config BOARD_SERIAL_GPS2
+        string "GPS2 tty port"
+
+    config BOARD_SERIAL_GPS3
+        string "GPS3 tty port"
+
+    config BOARD_SERIAL_GPS4
+        string "GPS4 tty port"
+
+    config BOARD_SERIAL_GPS5
+        string "GPS5 tty port"
+
+    config BOARD_SERIAL_TEL1
+        string "TEL1 tty port"
+
+    config BOARD_SERIAL_TEL2
+        string "TEL2 tty port"
+
+    config BOARD_SERIAL_TEL3
+        string "TEL3 tty port"
+
+    config BOARD_SERIAL_TEL4
+        string "TEL4 tty port"
+
+    config BOARD_SERIAL_TEL5
+        string "TEL5 tty port"
+
+    config BOARD_SERIAL_RC
+        string "RC tty port"
+
+    config BOARD_SERIAL_WIFI
+        string "WIFI tty port"
+
+    config BOARD_SERIAL_PPB
+        string "PPB (Pixhawk Payload Bus) tty port"
+endmenu
+
+menu "drivers"
+source "src/drivers/Kconfig"
+endmenu
+
+menu "modules"
+source "src/modules/Kconfig"
+endmenu
+
+menu "systemcmds"
+source "src/systemcmds/Kconfig"
+endmenu
+
+menu "examples"
+source "src/examples/Kconfig"
+endmenu
@@ -63,7 +63,7 @@ all: px4_sitl_default
 space := $(subst ,, )

 define make_list
-     $(shell cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
+     $(shell [ -f .github/workflows/compile_${1}.yml ] && cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
 endef

 # Parsing
@@ -165,10 +165,16 @@ ifdef PYTHON_EXECUTABLE
 	CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif

+# Check if the microRTPS agent is to be built
+ifdef BUILD_MICRORTPS_AGENT
+  CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
+endif
+
 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
 define cmake-build
+	$(eval CMAKE_ARGS += -DCONFIG=$(1))
 	@$(eval BUILD_DIR = "$(SRC_DIR)/build/$(1)")
 	@# check if the desired cmake configuration matches the cache then CMAKE_CACHE_CHECK stays empty
 	@$(call cmake-cache-check)
@@ -207,8 +213,8 @@ define colorecho
 +@echo -e '${COLOR_BLUE}${1} ${NO_COLOR}'
 endef

-# Get a list of all config targets boards/*/*.cmake
-ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 ! -name '*common*' ! -name '*sdflight*' -name '*.cmake' -print | sed -e 's|boards\/||' | sed -e 's|\.cmake||' | sed -e 's|\/|_|g' | sort)
+# Get a list of all config targets boards/*/*.px4board
+ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4board' -print | sed -e 's|boards\/||' | sed -e 's|\.px4board||' | sed -e 's|\/|_|g' | sort)

 # ADD CONFIGS HERE
 # --------------------------------------------------------------------
@@ -216,20 +222,19 @@ ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 ! -name '*comm

 # All targets.
 $(ALL_CONFIG_TARGETS):
-	@$(eval PX4_CONFIG = $@)
-	@$(eval CMAKE_ARGS += -DCONFIG=$(PX4_CONFIG))
-	@$(call cmake-build,$(PX4_CONFIG)$(BUILD_DIR_SUFFIX))
+	@$(call cmake-build,$@$(BUILD_DIR_SUFFIX))

 # Filter for only default targets to allow omiting the "_default" postfix
 CONFIG_TARGETS_DEFAULT := $(patsubst %_default,%,$(filter %_default,$(ALL_CONFIG_TARGETS)))
 $(CONFIG_TARGETS_DEFAULT):
-	@$(eval PX4_CONFIG = $@_default)
-	@$(eval CMAKE_ARGS += -DCONFIG=$(PX4_CONFIG))
-	@$(call cmake-build,$(PX4_CONFIG)$(BUILD_DIR_SUFFIX))
+	@$(call cmake-build,$@_default$(BUILD_DIR_SUFFIX))

 all_config_targets: $(ALL_CONFIG_TARGETS)
 all_default_targets: $(CONFIG_TARGETS_DEFAULT)

+updateconfig:
+	@./Tools/kconfig/updateconfig.py
+
 # board reorganization deprecation warnings (2018-11-22)
 define deprecation_warning
 	$(warning $(1) has been deprecated and will be removed, please use $(2)!)
@@ -238,16 +243,6 @@ endef
 # All targets with just dependencies but no recipe must either be marked as phony (or have the special @: as recipe).
 .PHONY: all px4_sitl_default all_config_targets all_default_targets

-# Multi- config targets.
-eagle_default: atlflight_eagle_default atlflight_eagle_qurt
-eagle_rtps: atlflight_eagle_rtps atlflight_eagle_qurt-rtps
-
-excelsior_default: atlflight_excelsior_default atlflight_excelsior_qurt
-excelsior_rtps: atlflight_excelsior_rtps atlflight_excelsior_qurt-rtps
-
-.PHONY: eagle_default eagle_rtps
-.PHONY: excelsior_default excelsior_rtps
-
 # Other targets
 # --------------------------------------------------------------------

@@ -274,7 +269,6 @@ misc_qgc_extra_firmware: \
 	check_bitcraze_crazyflie_default \
 	check_bitcraze_crazyflie21_default \
 	check_airmind_mindpx-v2_default \
-	check_px4_fmu-v2_lpe \
 	sizes

 # builds with RTPS
@@ -302,10 +296,17 @@ check_%:
 	@$(MAKE) --no-print-directory $(subst check_,,$@)
 	@echo

+all_variants_%:
+	@echo 'Building all $(subst all_variants_,,$@) variants:'  $(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS))
+	@echo
+	$(foreach a,$(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS)), $(call cmake-build,$(a)$(BUILD_DIR_SUFFIX)))
+
 uorb_graphs:
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --merge-depends --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --exclude-path src/modules/mavlink --merge-depends --file Tools/uorb_graph/graph_full_no_mavlink
 	@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
 	@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
+	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph


@@ -315,18 +316,21 @@ coverity_scan: px4_sitl_default

 # Documentation
 # --------------------------------------------------------------------
-.PHONY: parameters_metadata airframe_metadata module_documentation px4_metadata doxygen
+.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata doxygen

 parameters_metadata:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen

 airframe_metadata:
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_airframes
+	@$(MAKE) --no-print-directory px4_sitl_default metadata_airframes ver_gen

 module_documentation:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_module_documentation

-px4_metadata: parameters_metadata airframe_metadata module_documentation
+extract_events:
+	@$(MAKE) --no-print-directory px4_sitl_default metadata_extract_events ver_gen
+
+px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events

 doxygen:
 	@mkdir -p "$(SRC_DIR)"/build/doxygen
@@ -353,7 +357,6 @@ format:
 .PHONY: rostest python_coverage

 tests:
-	$(eval CMAKE_ARGS += -DCONFIG=px4_sitl_test)
 	$(eval CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
 	$(eval ARGS += test_results)
 	$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
@@ -461,35 +464,37 @@ shellcheck_all:
 	@make px4_fmu-v5_default shellcheck

 validate_module_configs:
-	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f -print0 | xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
+	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f -not -path "$(SRC_DIR)/src/lib/mixer_module/*" -print0 | xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml

 # Cleanup
 # --------------------------------------------------------------------
 .PHONY: clean submodulesclean submodulesupdate gazeboclean distclean

 clean:
-	@rm -rf "$(SRC_DIR)"/build
-	@git submodule foreach git clean -df
+	@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
+	@git submodule foreach git clean -dX --force # some submodules generate build artifacts in source

 submodulesclean:
 	@git submodule foreach --quiet --recursive git clean -ff -x -d
 	@git submodule update --quiet --init --recursive --force || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --force
+	@git submodule update --init --recursive --force --jobs 4

 submodulesupdate:
-	@git submodule update --quiet --init --recursive || true
+	@git submodule update --quiet --init --recursive --jobs 4 || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive
+	@git submodule update --init --recursive --jobs 4
+	@git fetch --all --tags --recurse-submodules=yes --jobs=4

 gazeboclean:
 	@rm -rf ~/.gazebo/*

 distclean: gazeboclean
-	@git submodule deinit -f .
-	@git clean -ff -x -d -e ".cproject" -e ".idea" -e ".project" -e ".settings" -e ".vscode"
+	@git submodule deinit --force $(SRC_DIR)
+	@rm -rf "$(SRC_DIR)/build"
+	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"

-# Help / Error
+# Help / Error / Misc
 # --------------------------------------------------------------------

 # All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
@@ -503,7 +508,7 @@ help:
 	@echo "Where <target> is one of:"
 	@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
 		awk -v RS= -F: '/^# File/,/^# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
-		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(posix|eagle|Makefile)'
+		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
 	@echo
 	@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"
 	@echo "Use '$(MAKE) list_config_targets' for a list of configuration targets."
@@ -523,3 +528,18 @@ check_px4: $(call make_list,nuttx,"px4") \

 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes
+
+ifneq ($(ROS2_WS_DIR),)
+  ROS2_WS_DIR := $(basename ${ROS2_WS_DIR})
+else
+  ROS2_WS_DIR := ~/colcon_ws
+endif
+
+update_ros2_bridge:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --all
+
+update_px4_ros_com:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_ros_com
+
+update_px4_msgs:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_msgs
@@ -4,11 +4,11 @@

 [![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)

-[![Slack](https://px4-slack.herokuapp.com/badge.svg)](http://slack.px4.io)
+[![Slack](/.github/slack.svg)](https://join.slack.com/t/px4/shared_invite/zt-si4xo5qs-R4baYFmMjlrT4rQK5yUnaA)

 This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/master/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.

-PX4 is highly portable, OS-independent and supports Linux, NuttX and QuRT out of the box.
+PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box.

 * Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/master/LICENSE))
 * [Supported airframes](https://docs.px4.io/master/en/airframes/airframe_reference.html) ([portfolio](http://px4.io/#airframes)):
@@ -110,7 +110,7 @@ This repository contains code supporting Pixhawk standard boards (best supported
  * [Hex Cube Yellow](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_yellow.html)
  * [Airmind MindPX V2.8](http://www.mindpx.net/assets/accessories/UserGuide_MindPX.pdf)
  * [Airmind MindRacer V1.2](http://mindpx.net/assets/accessories/mindracer_user_guide_v1.2.pdf)
-  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/master/en/flight_controller/crazyflie2.html)
+  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/master/en/complete_vehicles/crazyflie2.html)
  * [Omnibus F4 SD](https://docs.px4.io/master/en/flight_controller/omnibus_f4_sd.html)
  * [Holybro Kakute F7](https://docs.px4.io/master/en/flight_controller/kakutef7.html)
  * [Raspberry PI with Navio 2](https://docs.px4.io/master/en/flight_controller/raspberry_pi_navio2.html)
@@ -115,10 +115,12 @@ add_custom_command(
 set(romfs_extract_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_extract.stamp)
 add_custom_command(
 	OUTPUT ${romfs_extract_stamp}
+	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
 	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_extract_stamp}
 	WORKING_DIRECTORY ${romfs_gen_root_dir}
 	DEPENDS ${romfs_tar_file}
+	VERBATIM
 	)

 add_custom_command(
@@ -15,15 +15,6 @@ set +e
 #
 #------------------------------------------------------------------------------
 set R /
-#
-# Mount the procfs.
-#
-mount -t procfs /proc
-
-#
-# Start CDC/ACM serial driver.
-#
-sercon

 #
 # Print full system version.
@@ -34,9 +34,10 @@
 add_subdirectory(airframes)

 px4_add_romfs_files(
-	px4-rc.params
-	px4-rc.simulator
 	px4-rc.mavlink
+	px4-rc.params
+	px4-rc.rtps
+	px4-rc.simulator
 	rc.replay
 	rcS
 )
@@ -8,7 +8,8 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-. ${R}etc/init.d/rc.ctrlalloc
+
+param set-default SYS_CTRL_ALLOC 1

 param set-default MPC_USE_HTE 0

@@ -45,4 +46,10 @@ param set-default CA_MC_R3_PY 0.1875
 param set-default CA_MC_R3_CT 6.5
 param set-default CA_MC_R3_KM -0.05

-set MIXER direct
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+set MIXER skip
+set MIXER_AUX none
@@ -7,6 +7,5 @@

 . ${R}etc/init.d-posix/airframes/10016_iris

-param set-default EKF2_RNG_AID 1
 param set-default EKF2_RNG_A_HMAX 10

@@ -8,6 +8,6 @@
 . ${R}etc/init.d/rc.mc_defaults

 param set-default MC_PITCHRATE_P 0.1
-param set-default MC_ROLLRATE_P 0.1
+param set-default MC_ROLLRATE_P 0.05

 set MIXER quad_x
@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (RTPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
@@ -6,13 +6,10 @@
 . ${R}etc/init.d/rc.uuv_defaults

 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0

 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-#param set CBRK_GPSFAIL 240024
-
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

@@ -6,13 +6,10 @@
 . ${R}etc/init.d/rc.uuv_defaults

 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0

 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-#param set CBRK_GPSFAIL 240024
-
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

@@ -6,7 +6,6 @@
 . ${R}etc/init.d/rc.uuv_defaults

 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0

 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
@@ -5,8 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

@@ -18,7 +16,6 @@ param set-default FW_L1_PERIOD 12

 param set-default FW_MAN_P_MAX 30

-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
@@ -46,7 +43,6 @@ param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

@@ -5,9 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,19 +34,12 @@ param set-default MIS_DIST_WPS 10000

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set FW_THR_SLEW_MAX 0.3
-
 param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_MAX_ROLL 10

-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set-default RWTO_MAX_THR 0.6
-
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

@@ -5,9 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,19 +34,12 @@ param set-default MIS_DIST_WPS 10000

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set FW_THR_SLEW_MAX 0.3
-
 param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_MAX_ROLL 10

-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set RWTO_MAX_THR 0.6
-
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

@@ -5,8 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

@@ -35,7 +33,6 @@ param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

@@ -5,9 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,7 +34,6 @@ param set-default MIS_DIST_WPS 10000

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1
 param set-default RWTO_MAX_PITCH 20
@@ -0,0 +1,50 @@
+#!/bin/sh
+#
+# @name Plane SITL
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_MAN_P_MAX 30
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.2
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_CRUISE 0.25
+
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom
@@ -0,0 +1,9 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_THR_CRUISE 0.0
+param set-default RWTO_TKOFF 0
@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
@@ -12,20 +12,12 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-param set-default ASPD_STALL 10.0
+param set-default FW_AIRSPD_STALL 8

 param set-default FW_P_RMAX_NEG 20.0
-param set-default FW_P_RMAX_POS 60.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1

-param set-default FW_PR_IMAX 0.4
-param set-default FW_R_TC 0.4
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_I 0.1
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.08

 param set-default MIS_LTRMIN_ALT 50
@@ -41,7 +33,6 @@ param set-default FW_ARSP_SCALE_EN 0

 param set-default FW_AIRSPD_MAX 35
 param set-default FW_AIRSPD_MIN 7
-param set-default FW_AIRSPD_TRIM 15

 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
@@ -12,7 +12,6 @@
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLL_P 6.0
 param set-default MPC_XY_VEL_I_ACC 4
@@ -6,7 +6,17 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-. ${R}etc/init.d/rc.ctrlalloc
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0

 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3
@@ -66,7 +76,14 @@ param set-default CA_MC_R5_PY -0.5
 param set-default CA_MC_R5_CT 9.5
 param set-default CA_MC_R5_KM -0.05

+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+
 set MAV_TYPE 13

-# set MIXER hexa_x
-set MIXER direct
+set MIXER skip
+set MIXER_AUX none
@@ -46,8 +46,6 @@ px4_add_romfs_files(
 	1014_solo
 	1015_iris_obs_avoid
 	1015_iris_obs_avoid.post
-	1016_iris_rtps
-	1016_iris_rtps.post
 	1017_iris_opt_flow_mockup
 	1018_iris_vision_velocity
 	1019_iris_dual_gps
@@ -62,6 +60,8 @@ px4_add_romfs_files(
 	1034_rascal-electric
 	1035_techpod
 	1036_malolo
+	1037_believer
+	1038_glider
 	1040_standard_vtol
 	1041_tailsitter
 	1042_tiltrotor
@@ -77,6 +77,6 @@ px4_add_romfs_files(
 	2507_cloudship
 	6011_typhoon_h480
 	6011_typhoon_h480.post
-	6012_typhoon_ctrlalloc
-	6012_typhoon_ctrlalloc.post
+	6012_typhoon_h480_ctrlalloc
+	6012_typhoon_h480_ctrlalloc.post
 )
@@ -1,5 +1,5 @@
 #!/bin/sh
 # shellcheck disable=SC2154

-#param set MAV_SYS_ID $((px4_instance+1))
-#param set IMU_INTEG_RATE 250
+#param set-default MAV_SYS_ID $((px4_instance+1))
+#param set-default IMU_INTEG_RATE 250
@@ -21,8 +21,6 @@ then
 fi

 # initialize script variables
-set AUX_MODE                    none
-set AUX_BANK2			none
 set IO_PRESENT                  no
 set MAV_TYPE                    none
 set MIXER                       none
@@ -48,10 +46,10 @@ else
 	# shellcheck disable=SC2012
 	REQUESTED_AUTOSTART=$(ls "${R}etc/init.d-posix/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
 	if [ -z "$REQUESTED_AUTOSTART" ]; then
-		echo "Error: Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
+		echo "ERROR  [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
-		echo "Info: found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
+		echo "INFO  [init] found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
 	fi
 fi

@@ -122,11 +120,9 @@ then

 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
-
-	param set SYS_RESTART_TYPE 2
 fi

-param set-default BAT_N_CELLS 4
+param set-default BAT1_N_CELLS 4

 param set-default CBRK_AIRSPD_CHK 0
 param set-default CBRK_SUPPLY_CHK 894281
@@ -225,6 +221,11 @@ sensors start
 commander start
 navigator start

+# Try to start the micrortps_client with UDP transport if module exists
+if px4-micrortps_client status > /dev/null 2>&1
+then
+	. px4-rc.rtps
+fi

 if param greater -s MNT_MODE_IN -1
 then
@@ -42,7 +42,6 @@ px4_add_romfs_files(
 	rc.fw_apps
 	rc.fw_defaults
 	rc.interface
-	rc.io
 	rc.logging
 	rc.mc_apps
 	rc.mc_defaults
@@ -56,5 +55,4 @@ px4_add_romfs_files(
 	rc.vehicle_setup
 	rc.vtol_apps
 	rc.vtol_defaults
-	rc.ctrlalloc
 )
@@ -13,12 +13,12 @@
 # @output MAIN6 gear
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
 #

 . ${R}etc/init.d/rc.fw_defaults

-
-param set-default BAT_N_CELLS 3
+param set-default BAT1_N_CELLS 3

 param set-default FW_AIRSPD_MAX 20
 param set-default FW_AIRSPD_MIN 12
@@ -29,22 +29,16 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0
 param set-default FW_PR_FF 0.35
-param set-default FW_PR_I 0.1
-param set-default FW_PR_IMAX 0.4
 param set-default FW_PR_P 0.2
 param set-default FW_RR_FF 0.6
-param set-default FW_RR_I 0.1
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.3

 param set-default RWTO_TKOFF 1

-
 param set SYS_HITL 1

 # disable some checks to allow to fly
@@ -25,19 +25,12 @@

 . ${R}etc/init.d/rc.mc_defaults

-
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.1
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.0017
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0.14
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.0025
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.28
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-set MIXER quad_w

-set PWM_OUT 1234
+set MIXER quad_w
@@ -23,23 +23,18 @@

 . ${R}etc/init.d/rc.mc_defaults

-
 # TODO tune roll/pitch separately
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 2.5
 param set-default MC_YAWRATE_P 0.25
 param set-default MC_YAWRATE_I 0.25
-param set-default MC_YAWRATE_D 0

-param set-default BAT_V_DIV 12.27559
-param set-default BAT_A_PER_V 15.39103
+param set-default BAT1_V_DIV 12.27559
+param set-default BAT1_A_PER_V 15.39103
+
 set MIXER quad_w
-
-set PWM_OUT 1234
@@ -25,8 +25,7 @@

 . ${R}etc/init.d/rc.mc_defaults

-
-param set-default BAT_N_CELLS 4
+param set-default BAT1_N_CELLS 4

 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.13
@@ -37,9 +36,4 @@ param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 4
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
 set MIXER quad_w
-
-set PWM_OUT 1234
@@ -25,26 +25,19 @@

 . ${R}etc/init.d/rc.mc_defaults

-
-param set-default BAT_N_CELLS 6
-param set-default BAT_V_EMPTY 3.5
+param set-default BAT1_N_CELLS 6
+param set-default BAT1_V_EMPTY 3.5

 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.08
 param set-default MC_ROLLRATE_I 0.02
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.13
 param set-default MC_PITCHRATE_I 0.02
 param set-default MC_PITCHRATE_D 0.005
-param set-default MC_YAW_P 2.8
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0

 param set-default MPC_XY_VEL_MAX 2

 param set-default PWM_MAIN_MIN 1080
-set MIXER quad_w

-set PWM_OUT 1234
+set MIXER quad_w
@@ -6,12 +6,12 @@
 # @class Copter
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
 #

 . ${R}etc/init.d/rc.mc_defaults

 set MIXER quad_x
-set PWM_OUT 1234

 param set SYS_HITL 1

@@ -9,19 +9,18 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults


-param set-default BAT_N_CELLS 3
+param set-default BAT1_N_CELLS 3

 param set-default COM_RC_IN_MODE 1

-param set-default EKF2_AID_MASK 1
 param set-default EKF2_ANGERR_INIT 0.01
 param set-default EKF2_GBIAS_INIT 0.01
-param set-default EKF2_HGT_MODE 0
 param set-default EKF2_MAG_TYPE 1

 param set-default FW_AIRSPD_MAX 25
@@ -56,7 +55,6 @@ param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30

 param set-default SDLOG_DIRS_MAX 7
-param set-default SYS_RESTART_TYPE 2

 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_MOT_ID 1234
@@ -19,6 +19,7 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v2 exclude
 #

 . ${R}etc/init.d/rc.mc_defaults
@@ -26,3 +26,5 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027
+
+param set SIH_VEHICLE_TYPE 0
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name SIH plane AERT
+#
+# @type Simulation
+# @class Plane
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER AERT
+set PWM_OUT 1234
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+param set-default SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 6.0
+param set SIH_MASS 0.3
+param set SIH_IXX 0.00402
+param set SIH_IYY 0.0144
+param set SIH_IZZ 0.0177
+param set SIH_IXZ 0.00046
+param set SIH_KDV 0.2
+
+param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
@@ -36,15 +36,13 @@ param set-default MC_ROLLRATE_D 0.009
 param set-default MC_ROLLRATE_MAX 180

 param set-default MC_YAW_P 3
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0

 param set-default MPC_HOLD_MAX_XY 0.25
 param set-default MPC_THR_MIN 0.15
 param set-default MPC_Z_VEL_MAX_DN 2

-param set-default BAT_N_CELLS 4
+param set-default BAT1_N_CELLS 4
+
 set MIXER octo_cox_w

 set PWM_OUT 12345678
@@ -19,13 +19,13 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults


 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
@@ -14,6 +14,7 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults
@@ -24,20 +25,14 @@ param set-default MAV_TYPE 19
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.12
 param set-default MC_ROLLRATE_I 0.002
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0

 param set-default MC_PITCH_P 4.5
 param set-default MC_PITCHRATE_P 0.3
 param set-default MC_PITCHRATE_I 0.002
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0

 param set-default MC_YAW_P 3.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0

 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_ELEV_MC_LOCK 0
@@ -28,19 +28,13 @@ param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.19
 param set-default MC_ROLLRATE_I 0.002
 param set-default MC_ROLLRATE_D 0.005
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.14
 param set-default MC_PITCHRATE_I 0.002
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 4
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
-
-param set-default PWM_MAIN_RATE 400

 param set-default VT_FW_MOT_OFFID 34
 param set-default VT_IDLE_PWM_MC 1080
@@ -15,12 +15,10 @@


 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400

 param set-default VT_MOT_ID 1234
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
-param set-default VT_ELEV_MC_LOCK 1
 set MAV_TYPE 20

 set MIXER quad_x_vtol
@@ -22,13 +22,11 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400

 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
-param set-default VT_ELEV_MC_LOCK 1
+
 set MAV_TYPE 20

 set MIXER quad_+_vtol
@@ -19,42 +19,30 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_AUX_DIS5 950

-param set-default PWM_MAIN_RATE 400
-
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.002
 param set-default MC_ROLLRATE_D 0.004
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 6
 param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.002
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40

 param set-default MPC_YAWRAUTO_MAX 40

-param set-default FW_PR_FF 0.5
 param set-default FW_PR_I 0.02
-param set-default FW_PR_IMAX 0.4
-param set-default FW_PR_P 0.08
 param set-default FW_RR_FF 0.6
 param set-default FW_RR_I 0.01
-param set-default FW_RR_IMAX 0.2
-param set-default FW_RR_P 0.05
 param set-default FW_THR_CRUISE 0.75

 param set-default VT_ARSP_BLEND 6
@@ -17,26 +17,16 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults


-param set-default MC_ROLL_P 6.5
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.01
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
-param set-default MC_PITCH_P 6.5
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.01
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 3.5
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
+
 param set-default MC_YAWRATE_MAX 50

 param set-default MPC_XY_P 0.8
@@ -45,7 +35,6 @@ param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_YAWRAUTO_MAX 20

 param set-default PWM_AUX_DIS3 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
@@ -9,32 +9,24 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults


 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.002
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.12
 param set-default MC_PITCHRATE_I 0.002
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40

 param set-default MPC_YAWRAUTO_MAX 40

 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_MOT_ID 1234
@@ -15,44 +15,32 @@


 param set-default FW_THR_CRUISE 65
-param set-default FW_PR_P 0.08
-param set-default FW_PR_FF 0.5
-param set-default FW_RR_P 0.05
 param set-default FW_RR_FF 0.6

 param set-default MIS_YAW_TMT 10

 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.004
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 3.5
 param set-default MC_YAWRATE_P 0.6
 param set-default MC_YAWRATE_I 0.04
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40

 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_Z_VEL_MAX_DN 1.5
-param set-default MPC_TKO_SPEED 1.5
 param set-default MPC_LAND_SPEED 0.8
 param set-default MPC_YAWRAUTO_MAX 40

 param set-default PWM_AUX_DIS5 950
 param set-default PWM_AUX_REV1 1
 param set-default PWM_AUX_REV2 1
-param set-default PWM_MAIN_RATE 400

 param set-default VT_ARSP_TRANS 15
 param set-default VT_ARSP_BLEND 8
-param set-default VT_B_TRANS_DUR 4
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_MOT_ID 1234
@@ -9,11 +9,11 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default FW_AIRSPD_MAX   22
 param set-default FW_AIRSPD_MIN   14
 param set-default FW_AIRSPD_TRIM  16
@@ -68,10 +68,7 @@ param set-default PWM_AUX_REV4    1

 param set-default PWM_AUX_DIS5 950

-param set-default PWM_MAIN_RATE 400
-
 param set-default VT_ARSP_TRANS   15
-param set-default VT_B_TRANS_DUR  4
 param set-default VT_F_TRANS_THR    0.6
 param set-default VT_IDLE_PWM_MC 1180
 param set-default VT_MOT_ID 1234
@@ -13,14 +13,12 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
 param set-default PWM_AUX_MIN 1000
 param set-default PWM_AUX_RATE 50

 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400

 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 13
@@ -22,7 +22,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default CBRK_AIRSPD_CHK 162128

 param set-default FW_ARSP_MODE 1
@@ -32,22 +31,14 @@ param set-default FW_MAN_R_MAX 50
 param set-default FW_ACRO_X_MAX   270
 param set-default FW_ACRO_Y_MAX   270
 param set-default FW_ACRO_Z_MAX   180
-param set-default FW_PR_FF    0.5
-param set-default FW_PR_P 0.08
 param set-default FW_PSP_OFF  5
 param set-default FW_P_LIM_MAX    30
 param set-default FW_P_LIM_MIN    -30
-param set-default FW_P_RMAX_NEG   60
-param set-default FW_P_RMAX_POS   60
 param set-default FW_RR_FF    0.33
 param set-default FW_RR_P 0.11
-param set-default FW_YR_FF    0.3
-param set-default FW_YR_P 0.05

-param set-default MC_PITCHRATE_D  0.003
 param set-default MC_PITCHRATE_P  0.15
 param set-default MC_PITCH_P  6
-param set-default MC_ROLLRATE_D   0.003
 param set-default MC_ROLLRATE_P   0.15
 param set-default MC_ROLL_P   6
 param set-default MC_YAWRATE_MAX  120
@@ -57,9 +48,6 @@ param set-default MC_YAW_P    2.5
 param set-default MC_YAWRATE_P 0.3
 param set-default MPC_LAND_SPEED 1.2
 param set-default MPC_TKO_SPEED 2.5
-param set-default MPC_Z_VEL_MAX_UP 3
-
-param set-default PWM_MAIN_RATE 400

 param set-default SENS_BOARD_ROT 8

@@ -69,11 +57,8 @@ param set-default VT_F_TR_OL_TM   4
 param set-default VT_FW_DIFTHR_EN 1
 param set-default VT_FW_DIFTHR_SC 0.17
 param set-default VT_FW_MOT_OFFID 3
-param set-default VT_FW_PERM_STAB 0
 param set-default VT_IDLE_PWM_MC 1200
 param set-default VT_MOT_ID 123
-param set-default VT_TILT_FW  1
-param set-default VT_TILT_MC  0
 param set-default VT_TILT_TRANS   0.45
 param set-default VT_TRANS_MIN_TM 1.2
 param set-default VT_TRANS_P2_DUR 1.3
@@ -22,10 +22,9 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
-param set-default BAT_CAPACITY 23000
-param set-default BAT_N_CELLS 4
-param set-default BAT_R_INTERNAL 0.0025
+param set-default BAT1_CAPACITY 23000
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_R_INTERNAL 0.0025

 param set-default CBRK_AIRSPD_CHK 162128
 param set-default CBRK_IO_SAFETY 22027
@@ -69,23 +68,13 @@ param set-default LNDMC_ALT_MAX 9999
 param set-default LNDMC_XY_VEL_MAX 1
 param set-default LNDMC_Z_VEL_MAX 0.7

-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.16
 param set-default MC_ROLLRATE_I 0.01
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_ROLLRATE_MAX 80
-param set-default MC_PITCH_P 6.5
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_PITCHRATE_MAX 80
 param set-default MC_YAW_P 3.5
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
+
 param set-default MC_YAWRATE_MAX 20
 param set-default MC_AIRMODE 1

@@ -109,7 +98,6 @@ param set-default MPC_TILTMAX_AIR 25
 param set-default MPC_TILTMAX_LND 25
 param set-default MPC_YAWRAUTO_MAX 20

-param set-default NAV_DLL_ACT 0
 param set-default NAV_LOITER_RAD 100

 param set-default PWM_AUX_DISARM 950
@@ -119,7 +107,6 @@ param set-default PWM_MAIN_DIS6 1500
 param set-default PWM_MAIN_DIS7 900
 param set-default PWM_MAIN_DIS8 900

-param set-default PWM_MAIN_RATE 400

 param set-default SENS_BOARD_ROT 18

@@ -133,13 +120,11 @@ param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_F_TRANS_THR 1
-param set-default VT_DWN_PITCH_MAX 8
+param set-default VT_PITCH_MIN 8
 param set-default VT_FW_QC_P 55
 param set-default VT_FW_QC_R 55
 param set-default VT_TRANS_MIN_TM 15
 param set-default VT_B_TRANS_DUR 8
-param set-default VT_WV_LND_EN 1
-param set-default VT_WV_LTR_EN 1
 param set-default VT_FWD_THRUST_SC 4
 param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
@@ -18,26 +18,22 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults

-
-
-param set-default BAT_N_CELLS 6
+param set-default BAT1_N_CELLS 6

 param set-default FW_AIRSPD_MAX 30
 param set-default FW_AIRSPD_MIN 19
 param set-default FW_AIRSPD_TRIM 23
 param set-default FW_L1_R_SLEW_MAX 40
-param set-default FW_LND_EARLYCFG 1
 param set-default FW_MAN_P_MAX 30
-param set-default FW_PR_I 0.1
 param set-default FW_PSP_OFF 3
 param set-default FW_P_LIM_MAX 18
 param set-default FW_P_LIM_MIN -25
 param set-default FW_RLL_TO_YAW_FF 0.1
-param set-default FW_RR_I 0.1
 param set-default FW_RR_P 0.08
 param set-default FW_R_LIM 45
 param set-default FW_R_RMAX 50
@@ -47,22 +43,15 @@ param set-default FW_THR_SLEW_MAX 0.6
 param set-default FW_T_HRATE_FF 0
 param set-default FW_T_SINK_MAX 15
 param set-default FW_T_SINK_MIN 3
-param set-default FW_YR_I 0.1
 param set-default FW_YR_P 0.15

-param set-default IMU_GYRO_CUTOFF 40
-
 param set-default IMU_DGYRO_CUTOFF 15
-param set-default MC_PITCHRATE_I 0.2
 param set-default MC_PITCHRATE_MAX 60
-param set-default MC_ROLLRATE_I 0.2
 param set-default MC_ROLLRATE_MAX 60
 param set-default MC_YAWRATE_I 0.15
 param set-default MC_YAWRATE_MAX 40
 param set-default MC_YAWRATE_P 0.3

-param set-default MIS_TAKEOFF_ALT 30
-
 param set-default MPC_ACC_DOWN_MAX 2
 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_ACC_UP_MAX 3
@@ -71,7 +60,6 @@ param set-default MPC_JERK_AUTO 4
 param set-default MPC_LAND_SPEED 1
 param set-default MPC_MAN_TILT_MAX 25
 param set-default MPC_MAN_Y_MAX 40
-param set-default MPC_POS_MODE 3
 param set-default MPC_SPOOLUP_TIME 1.5
 param set-default MPC_THR_HOVER 0.45
 param set-default MPC_TILTMAX_AIR 25
@@ -22,13 +22,11 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults

-
-param set-default PWM_MAIN_RATE 400
-
 param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1
 param set-default VT_MOT_ID 1234
@@ -21,13 +21,12 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 12345678
@@ -14,11 +14,11 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board holybro_kakutef7 exclude
 #

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0
@@ -13,10 +13,9 @@
 # @maintainer Trent Lukaczyk <aerialhedgehog@gmail.com>
 #
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v2 exclude
 #

 . ${R}etc/init.d/rc.mc_defaults

 set MIXER tri_y_yaw+
-
-set PWM_OUT 1234
@@ -13,10 +13,9 @@
 # @maintainer Trent Lukaczyk <aerialhedgehog@gmail.com>
 #
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v2 exclude
 #

 . ${R}etc/init.d/rc.mc_defaults

 set MIXER tri_y_yaw-
-
-set PWM_OUT 1234
@@ -19,29 +19,19 @@
 . ${R}etc/init.d/rc.mc_defaults
 set MIXER coax

-
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.005
-param set-default MC_ROLLRATE_FF 0
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0.17
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.005
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 2
 param set-default MC_YAWRATE_P 0.1
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0

 param set-default NAV_ACC_RAD 2

 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_DISARM 900
-param set-default PWM_MAIN_MIN 1075
-param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_RATE 400

 param set-default RTL_RETURN_ALT 30
@@ -50,5 +40,4 @@ param set-default RTL_DESCEND_ALT 10
 set MIXER_AUX pass

 # use PWM parameters for throttle channel
-set PWM_AUX_OUT 1234
 set PWM_OUT 34
@@ -24,8 +24,7 @@ set MAV_TYPE 4

 set MIXER blade130

-#set PWM_OUT 1234
-
+set PWM_OUT none

 param set-default ATT_BIAS_MAX 0

@@ -36,7 +35,6 @@ param set-default MC_ROLLRATE_P 0
 param set-default MC_ROLLRATE_I 0
 param set-default MC_ROLLRATE_D 0
 param set-default MC_ROLLRATE_FF 0.15
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0
 param set-default MC_PITCHRATE_I 0
 param set-default MC_PITCHRATE_D 0
@@ -44,7 +42,6 @@ param set-default MC_PITCHRATE_FF 0.15
 param set-default MC_YAW_P 3
 param set-default MC_YAWRATE_P 0.1
 param set-default MC_YAWRATE_I 0
-param set-default MC_YAWRATE_D 0
 param set-default MC_ROLLRATE_MAX 720
 param set-default MC_PITCHRATE_MAX 720
 param set-default MC_YAWRATE_MAX 400
@@ -26,8 +26,8 @@
 . ${R}etc/init.d/rc.fw_defaults


-param set-default BAT_CAPACITY 2500
-param set-default BAT_N_CELLS 3
+param set-default BAT1_CAPACITY 2500
+param set-default BAT1_N_CELLS 3

 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_RATE 50
@@ -46,5 +46,6 @@ param set-default FW_R_LIM 40
 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
+
 set MIXER TF-AutoG2
 set MIXER_AUX pass
@@ -21,8 +21,8 @@
 . ${R}etc/init.d/rc.fw_defaults


-param set-default BAT_CAPACITY 3300
-param set-default BAT_N_CELLS 3
+param set-default BAT1_CAPACITY 3300
+param set-default BAT1_N_CELLS 3

 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_RATE 50
@@ -15,7 +15,6 @@

 . ${R}etc/init.d/rc.balloon_defaults

-
 param set-default COM_PREARM_MODE 2  # always in prearm state
 param set-default CBRK_IO_SAFETY 22027
 param set-default SDLOG_PROFILE 17
@@ -25,9 +24,8 @@ param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600

-param set-default SENS_BOARD_ROT 0
-        param set MAV_TYPE 8  # MAV_TYPE_FREE_BALLOON
-
+set MAV_TYPE 8
+param set MAV_TYPE ${MAV_TYPE}

 set MIXER IO_pass
 set MIXER_AUX pass
@@ -25,10 +25,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55
@@ -25,10 +25,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55
@@ -26,10 +26,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55
@@ -23,11 +23,11 @@
 # @maintainer William Peale <develop707@gmail.com>
 #
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v2 exclude
 #

 set VEHICLE_TYPE mc

-
 param set-default NAV_ACC_RAD 2

 param set-default PWM_AUX_RATE 400
@@ -35,8 +35,6 @@ param set-default PWM_AUX_DISARM 900
 param set-default PWM_AUX_MIN 1075
 param set-default PWM_AUX_MAX 1950

-param set-default PWM_MAIN_MIN 1075
-param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_RATE 400

 param set-default RTL_DESCEND_ALT 10
--- a/Show More
+++ b/Show More