Copilot Review instructions: Drivers

If the measured temperature exceeds the fixed threshold of 100 degC, a
fault is declared, causing batteryCheck to show a failsafe warning to
the user.

.clusterfuzzlite/Dockerfile

@@ -1,7 +0,0 @@
-FROM gcr.io/oss-fuzz-base/base-builder:v1
-COPY . $SRC/PX4-Autopilot
-RUN apt-get install -y libjpeg8-dev zlib1g-dev
-RUN pip3 install --upgrade pip
-RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
-WORKDIR $SRC/PX4-Autopilot
-COPY ./.clusterfuzzlite/build.sh $SRC/

.clusterfuzzlite/build.sh

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash -eu
-
-PX4_FUZZ=1 make px4_sitl
-cp build/px4_sitl_default/bin/px4 $OUT/px4

.clusterfuzzlite/project.yaml

@@ -1 +0,0 @@
-language: c++

.editorconfig

@@ -12,3 +12,11 @@ max_line_length = 120
 [*.yaml, *.yml]
 indent_style = space
 indent_size = 2
+
+[*.sh]
+indent_style = tab
+indent_size = 2
+insert_final_newline = true
+trim_trailing_whitespace = true
+# Not in the official standard, but supported by many editors
+max_line_length = 80

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -3,92 +3,45 @@ description: Create a report to help us improve
 title: "[Bug] "
 labels: ["bug-report"]
 body:
+  - type: markdown
+    attributes:
+      value: |
+        **Tips for a great bug report:**
+        - Describe what went wrong and what you expected
+        - Include a flight log link from [logs.px4.io](http://logs.px4.io/) if possible
+        - Mention your PX4 version, flight controller, and vehicle type if relevant
+
   - type: textarea
     attributes:
       label: Describe the bug
-      description: A clear and concise description of the bug.
+      description: A clear description of the bug and what you expected to happen.
+      placeholder: |
+        What happened and what did you expect instead?
+
+        Steps to reproduce (if applicable):
+        1.
+        2.
+        3.
     validations:
       required: true
 
   - type: textarea
     attributes:
-      label: To Reproduce
+      label: Flight Log / Additional Information
       description: |
-          Steps to reproduce the behavior.
-          1. Drone switched on '...'
-          2. Uploaded mission '....' (attach QGC mission file)
-          3. Took off '....'
-          4. See error
-    validations:
-      required: false
+        **Flight log** (highly recommended for flight-related issues):
+        - Upload to [PX4 Flight Review](http://logs.px4.io/) and paste the link
 
-  - type: textarea
-    attributes:
-      label: Expected behavior
-      description: A clear and concise description of what you expected to happen.
-    validations:
-      required: false
-
-  - type: textarea
-    attributes:
-      label: Screenshot / Media
-      description: Add screenshot / media if you have them
-
-  - type: textarea
-    attributes:
-      label: Flight Log
-      description: |
-          *Always* provide a link to the flight log file:
-          - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/main/en/getting_started/flight_reporting.html)).
-          - Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
-          - Share the link to the log (Copy and paste the URL of the log)
+        **Additional details** (if relevant):
+        - PX4 version (output of `ver all` in MAVLink Shell)
+        - Flight controller model
+        - Vehicle type (multicopter, fixed-wing, VTOL, etc.)
+        - Screenshots or media
       placeholder: |
-          # PASTE HERE THE LINK TO THE LOG
+        Flight log link:
+
+        Version:
+
+        Hardware:
     validations:
       required: false
-
-  - type: markdown
-    attributes:
-      value: |
-        ## Setup
-
-  - type: textarea
-    attributes:
-      label: Software Version
-      description: |
-          Which version of PX4 are you using?
-      placeholder: |
-          # If you don't know the version, paste the output of `ver all` in the MAVLink Shell of QGC
-    validations:
-      required: false
-
-  - type: input
-    attributes:
-      label: Flight controller
-      description: Specify your flight controller model (what type is it, where was it bought from, ...).
-    validations:
-      required: false
-
-  - type: dropdown
-    attributes:
-      label: Vehicle type
-      options:
-        - Multicopter
-        - Helicopter
-        - Fixed Wing
-        - Hybrid VTOL
-        - Airship/Balloon
-        - Rover
-        - Boat
-        - Submarine
-        - Other
-
-  - type: textarea
-    attributes:
-      label: How are the different components wired up (including port information)
-      description: Details about how all is wired.
-
-  - type: textarea
-    attributes:
-      label: Additional context
-      description: Add any other context about the problem here.

.github/ISSUE_TEMPLATE/config.yml

@@ -1,4 +1,4 @@
-blank_issues_enabled: false
+blank_issues_enabled: true
 contact_links:
   - name: Support Question
     url: https://docs.px4.io/main/en/contribute/support.html#forums-and-chat

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,22 +1,9 @@
 <!--
 
-Thank you for your contribution!
-
-Get early feedback through
-- Dronecode Discord: https://discord.gg/dronecode
-- PX4 Discuss: http://discuss.px4.io/
-- opening a draft pr and sharing the link
-
--->
-
 ### Solved Problem
-When ... I found that ...
-
 Fixes #{Github issue ID}
 
 ### Solution
-- Add ... for ...
-- Refactor ...
 
 ### Changelog Entry
 For release notes:
@@ -27,11 +14,10 @@ Documentation: Need to clarify page ... / done, read docs.px4.io/...
 ```
 
 ### Alternatives
-We could also ...
 
 ### Test coverage
-- Unit/integration test: ...
-- Simulation/hardware testing logs: https://review.px4.io/
 
 ### Context
 Related links, screenshot before/after, video
+
+-->

.github/fuzzing_issue_template.md

@@ -0,0 +1,6 @@
+---
+title: '[CI] Fuzzing Workflow Failed'
+labels: ['Fuzzing']
+---
+The automated fuzzing workflow has failed.
+See {{ env.WORKFLOW_RUN_URL }} for details.

.github/instructions/docs.en.instructions.md

@@ -0,0 +1,48 @@
+---
+applyTo: "docs/en/**"
+---
+
+# Review Guidelines docs/en Tree
+
+## File System & Structure
+
+- **Naming:** Use `lowercase_with_underscores` for all filenames. No spaces.
+- **Hierarchy:** Markdown files must reside exactly in a first-level category folder. 
+  - Valid: `docs/en/category/file.md`
+  - Invalid: `docs/en/category/subcategory/file.md`
+- **Text Files:** Any `.txt` or `.text` files must start with an underscore (e.g., `_notes.txt`).
+- **Assets:** All images/non-docs must be in `/docs/assets/`. Deep nesting is permitted here.
+- **Formats:** Prefer **SVG** for diagrams and **PNG** for screenshots. Flag JPG files.
+
+## Markdown & Style
+
+- **Headings:** Use Title Case ("First Letter Capitalisation"). 
+  - The Page Title must be the only H1 (`#`). All others must be `##` or lower.
+  - Do not apply bold or italic styling inside a heading.
+- **Formatting:** 
+  - **Bold:** Only for UI elements (buttons, menu items).
+  - **Italics (Emphasis):** For tool names (e.g., *QGroundControl*).
+  - **Inline Code:** Use backticks for file paths, parameters, and CLI commands (e.g., `prettier`).
+- **Structure:** End every line at the end of a sentence (Semantic Line Breaks).
+
+## Linking & Navigation
+
+- **Standard Links:** Use standard inline syntax: `[link text](../category/filename.md)`.
+  Note relative link. 
+- **Table Links:** To keep tables readable, use reference-style links.
+  - Definition: `[Link Name]: https://example.com` (placed below the table).
+  - Usage: `[Link Name]` within the table cell.
+- **Images:** All image links must include a descriptive, accessible alt-text in the brackets: `![Detailed description of the image content](../../assets/path/to/image.png)`.
+  Note that all images should be relative references to images stored in the assets folder, which should be two folders below the any markdown file (as they are stored in a "category" subfolder) 
+
+- **Standard Links:** Use standard inline syntax: `[link text](../category/filename.md)`. Note the use of relative links.
+- **Table Links:** To keep tables easier to edit, prefer reference-style links.
+  - Definition: `[Link Name]: https://example.com` (placed below the table).
+  - Usage: `[Link Name]` within the table cell.
+- **Images:** All image links must include a descriptive, accessible alt-text: `![Detailed description of the image content](../../assets/path/to/image.png)`.
+  - **Note:** All images must be relative references to the `/docs/assets/` folder. Since documents are nested in a category folder, this is usually two levels up (`../../assets/`).
+
+## Quality Control
+
+- **Prettier Check:** Ensure Prettier rules have been applied. If there is evidence of inconsistent indentation or spacing, request the author run `npx prettier --write .` before merging.
+- **Language:** Enforce **UK English** spelling and grammar.

.github/instructions/src.drivers.instructions.md

@@ -0,0 +1,212 @@
+---
+applyTo: "src/drivers/**"
+---
+
+# PX4 Driver Review Instructions
+
+This file provides guidelines for reviewing driver files in the `src/drivers/` directory.
+
+## Copyright Statements
+
+### Required Files
+
+All source files (`.cpp`, `.c`, `.hpp`, `.h`, `CMakeLists.txt`) MUST include a copyright statement at the top.
+
+**Exceptions:** 
+- `Kconfig` files
+- `module.yaml` files
+
+### Copyright Format
+
+**For new files (created in 2026):**
+```cpp
+/****************************************************************************
+ *
+ *   Copyright (c) 2026 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+```
+
+**For updated files (originally created in 2015, updated in 2026):**
+```cpp
+/****************************************************************************
+ *
+ *   Copyright (c) 2015-2026 PX4 Development Team. All rights reserved.
+ *
+ * [... rest of copyright text ...]
+ *
+ ****************************************************************************/
+```
+
+### Key Points
+- First year should be the original creation year
+- When updating an existing file, update the year range: `YYYY-2026`
+- Use the current year (2026 in this case) for new files
+- Maintain consistent formatting with other PX4 driver files
+
+---
+
+## Driver Self-Documentation
+
+All drivers MUST be self-documenting through the `print_usage()` method.
+
+### Required Implementation
+
+Every driver `.cpp` file must implement a `print_usage()` method that includes:
+
+1. **PRINT_MODULE_DESCRIPTION macro** - Contains markdown documentation
+2. **Module identification** - Using PRINT_MODULE_USAGE_NAME and optionally PRINT_MODULE_USAGE_SUBCATEGORY
+3. **Parameter documentation** - Relevant parameters, especially enablement parameters
+
+### PRINT_MODULE_DESCRIPTION Structure
+
+The description should follow this markdown format:
+
+```cpp
+PRINT_MODULE_DESCRIPTION(
+    R"DESCR_STR(
+### Description
+[Clear description of what the driver does and its primary functionality]
+
+### Implementation
+[Optional: High-level overview of how the driver works]
+
+### Examples
+[Optional: CLI usage examples if non-trivial]
+$ module_name start -d /dev/ttyS1
+$ module_name stop
+
+)DESCR_STR");
+```
+
+### Required Sections
+
+#### 1. Description Section
+- Brief explanation of the driver's purpose
+- Key features/capabilities
+- Important parameters (especially enable parameters like `SENS_XX_CFG`)
+
+#### 2. Documentation Links
+When applicable, include links to user documentation:
+```cpp
+Setup/usage information: https://docs.px4.io/main/en/sensor/[sensor-name].html
+```
+
+#### 3. Examples Section (when relevant)
+Provide CLI usage examples for non-trivial commands:
+```cpp
+### Examples
+Attempt to start driver on a specified serial device.
+$ vectornav start -d /dev/ttyS1
+Stop driver
+$ vectornav stop
+```
+
+### Complete Example
+
+```cpp
+int MyDriver::print_usage(const char *reason)
+{
+    if (reason) {
+        PX4_WARN("%s\n", reason);
+    }
+
+    PRINT_MODULE_DESCRIPTION(
+        R"DESCR_STR(
+### Description
+This driver interfaces with the XYZ sensor via I2C/SPI. It provides
+distance measurements and is automatically started when SENS_XYZ_CFG
+is set to the appropriate value.
+
+Key features:
+- Distance range: 0.2m to 50m
+- Update rate: up to 100Hz
+- I2C and SPI support
+
+Setup/usage information: https://docs.px4.io/main/en/sensor/xyz_sensor.html
+
+### Examples
+Start driver on I2C bus 1 with address 0x29:
+$ xyz_sensor start -X -b 1 -a 0x29
+)DESCR_STR");
+
+    PRINT_MODULE_USAGE_NAME("xyz_sensor", "driver");
+    PRINT_MODULE_USAGE_SUBCATEGORY("distance_sensor");
+    PRINT_MODULE_USAGE_COMMAND("start");
+    PRINT_MODULE_USAGE_PARAMS_I2C_SPI_DRIVER(true, true);
+    PRINT_MODULE_USAGE_PARAMS_I2C_ADDRESS(0x29);
+    PRINT_MODULE_USAGE_DEFAULT_COMMANDS();
+
+    return 0;
+}
+```
+
+### Common Patterns by Driver Type
+
+**For UART/Serial Drivers:**
+```cpp
+PRINT_MODULE_USAGE_PARAM_STRING('d', "/dev/ttyS3", "<file:dev>", "Serial device", true);
+```
+
+**For I2C/SPI Drivers:**
+```cpp
+PRINT_MODULE_USAGE_PARAMS_I2C_SPI_DRIVER(true, true);
+PRINT_MODULE_USAGE_PARAMS_I2C_ADDRESS(0x76);
+```
+
+**For Sensor Drivers:**
+```cpp
+PRINT_MODULE_USAGE_SUBCATEGORY("distance_sensor");  // or imu, magnetometer, etc.
+```
+
+---
+
+## Review Checklist
+
+When reviewing driver files, verify:
+
+- [ ] Copyright header is present (except Kconfig and module.yaml)
+- [ ] Copyright year is correct (current year for new files, year range for updates)
+- [ ] `print_usage()` method exists
+- [ ] `PRINT_MODULE_DESCRIPTION` macro is present with markdown content
+- [ ] Description section explains driver purpose clearly
+- [ ] Relevant parameters are documented (especially enable parameters)
+- [ ] Documentation links are included when available
+- [ ] Examples are provided for complex CLI usage
+- [ ] Module name and category are correctly specified
+- [ ] Standard commands (start, stop, status) are documented
+
+---
+
+## Additional Resources
+
+- Driver template examples: `src/drivers/*/` (various sensor types)
+- Module macros: `platforms/common/include/px4_platform_common/module.h`
+- Similar drivers for reference patterns (DShot, VectorNav, CrsfRc, etc.)

.github/labeler.yml

@@ -0,0 +1,10 @@
+# Labeler configuration file for GitHub Actions
+# The action is ./.github/workflows/label.yml
+# Docs for the syntax in this file can be found at
+# https://github.com/actions/labeler
+
+
+# Add 'Documentation' label to any changes within 'docs' folder or any subfolders
+"Documentation 📑":
+- changed-files:
+  - any-glob-to-any-file: docs/**

.github/runs-on.yml

@@ -0,0 +1,24 @@
+runners:
+  x86-small-runner:
+    cpu: [1, 2]
+    ram: [1, 4]
+    disk: default
+    spot: price-capacity-optimized
+    image: ubuntu24-full-x64
+    extras: s3-cache
+  x86-firmware-builder:
+    cpu: [4, 8]
+    ram: [8, 16]
+    disk: default
+    family: ["c7i", "m7i", "r7i"]
+    spot: price-capacity-optimized
+    image: ubuntu24-full-x64
+    extras: s3-cache
+  arm64-firmware-builder:
+    cpu: [4, 8]
+    ram: [8, 16]
+    disk: default
+    family: ["c7g", "m7g", "r7g"]
+    spot: price-capacity-optimized
+    image: ubuntu24-full-arm64
+    extras: s3-cache

.github/workflows/build_all_targets.yml

@@ -18,7 +18,7 @@ on:
       - 'docs/**'
   pull_request:
     branches:
-      - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
 
@@ -26,11 +26,15 @@ concurrency:
   group: ${{ github.workflow }}-${{ github.ref }}
   cancel-in-progress: true
 
+permissions:
+  contents: write
+  actions: read
+
 jobs:
   group_targets:
     name: Scan for Board Targets
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
     outputs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
       timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
@@ -38,6 +42,14 @@ jobs:
     steps:
       - uses: actions/checkout@v4
 
+      - name: Cache Python pip
+        uses: actions/cache@v4
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip-${{ hashFiles('**./Tools/setup/requirements.txt') }}
+          restore-keys: |
+            ${{ runner.os }}-pip-
+
       - name: Update python packaging to avoid canonicalize_version() error
         run: |
             pip3 install -U packaging
@@ -48,13 +60,22 @@ jobs:
           path: "./Tools/setup/requirements.txt"
 
       - id: set-matrix
-        run: echo "::set-output name=matrix::$(./Tools/ci/generate_board_targets_json.py --group)"
+        name: Generate Build Matrix
+        run: echo "matrix=$(./Tools/ci/generate_board_targets_json.py --group)" >> $GITHUB_OUTPUT
 
       - id: set-timestamp
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
+        name: Save Current Timestamp
+        run: echo "timestamp=$(date +"%Y%m%d%H%M%S")" >> $GITHUB_OUTPUT
 
       - id: set-branch
-        run: echo "::set-output name=branchname::${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}"
+        name: Save Current Branch Name
+        run: |
+          echo "branchname=${{
+            github.event_name == 'pull_request' &&
+            format('pr-{0}', github.event.pull_request.number) ||
+            github.head_ref ||
+            github.ref_name
+          }}" >> $GITHUB_OUTPUT
 
       - name: Debug Matrix Output
         if: runner.debug == '1'
@@ -64,7 +85,7 @@ jobs:
           echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
 
   setup:
-    name: Build Group [${{ matrix.group }}][${{ matrix.arch == 'nuttx' && 'x86' || 'arm64' }}]
+    name: Build [${{ matrix.runner }}][${{ matrix.group }}]
     # runs-on: ubuntu-latest
     runs-on: [runs-on,"runner=8cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",spot=false]
     needs: group_targets
@@ -74,6 +95,7 @@ jobs:
     container:
       image: ${{ matrix.container }}
     steps:
+      - uses: runs-on/action@v2
       - uses: actions/checkout@v4
         with:
           fetch-depth: 0
@@ -81,14 +103,24 @@ jobs:
       - name: Git ownership workaround
         run: git config --system --add safe.directory '*'
 
-      - name: Setup ccache
-        uses: actions/cache@v4
+      # ccache key breakdown:
+      # ccache-<system os>-<system arch>-<builder group>-
+      # ccache-<linux>-<arm64>-<aarch64-0>-
+      # ccache-<linux>-<x64>-<nuttx-0>-
+      - name: Cache Restore from Key
+        id: cc_restore
+        uses: actions/cache/restore@v4
         with:
           path: ~/.ccache
-          key: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-          restore-keys: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
+          key: ${{ format('ccache-{0}-{1}-{2}', runner.os, matrix.runner, matrix.group) }}
+          restore-keys: |
+            ccache-${{ runner.os }}-${{ matrix.runner }}-${{ matrix.group }}-
+            ccache-${{ runner.os }}-${{ matrix.runner }}-
+            ccache-${{ runner.os }}-${{ matrix.runner }}-
+            ccache-${{ runner.os }}-
+            ccache-
 
-      - name: Configure ccache
+      - name: Cache Config and Stats
         run: |
             mkdir -p ~/.ccache
             echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
@@ -96,10 +128,11 @@ jobs:
             echo "compression_level = 6" >> ~/.ccache/ccache.conf
             echo "max_size = 120M" >> ~/.ccache/ccache.conf
             echo "hash_dir = false" >> ~/.ccache/ccache.conf
+            echo "compiler_check = content" >> ~/.ccache/ccache.conf
             ccache -s
             ccache -z
 
-      - name: Building [${{ matrix.group }}]
+      - name: Building Artifacts for [${{ matrix.targets }}]
         run: |
             ./Tools/ci/build_all_runner.sh ${{matrix.targets}} ${{matrix.arch}}
 
@@ -113,15 +146,27 @@ jobs:
           name: px4_${{matrix.group}}_build_artifacts
           path: artifacts/
 
+      - name: Cache Post Build Stats
+        if: always()
+        run: |
+            ccache -s
+            ccache -z
+
       - name: Cache Save
-        run: ccache -s
+        if: always()
+        uses: actions/cache/save@v4
+        with:
+          path: ~/.ccache
+          key: ${{ steps.cc_restore.outputs.cache-primary-key }}
 
   artifacts:
-    name: Upload Artifacts to S3
+    name: Upload Artifacts
     # runs-on: ubuntu-latest
     runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
     needs: [setup, group_targets]
-    if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
+    if: startsWith(github.ref, 'refs/tags/v') || contains(fromJSON('["main","stable","beta"]'), needs.group_targets.outputs.branchname)
+    outputs:
+      uploadlocation: ${{ steps.upload-location.outputs.uploadlocation }}
     steps:
       - name: Download Artifacts
         uses: actions/download-artifact@v4
@@ -129,11 +174,36 @@ jobs:
           path: artifacts/
           merge-multiple: true
 
-      - name: Branch Name
+      - name: Choose Upload Location
+        id: upload-location
         run: |
-          echo "${{ needs.group_targets.outputs.branchname }}"
+          # Determine upload location based on branch or tag with the following considerations:
+          # Destination: AWS S3 bucket px4-travis in folder Firmware/
+          # - If branch is main -> upload to master/
+          #   - Older versions of QGC are hardocded to look for master/
+          # - If branch is stable or beta -> upload to stable/ or beta/
+          # - If a tag vX.Y.Z -> upload to vX.Y.Z/
+          #   - Also update stable/ to point to the same version
+          #.  - Older versions of QGC are hardocded to look for stable/
+          # - If a pull request -> do not upload
+          set -euo pipefail
 
-      - name: Uploading Artifacts to S3 [${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}]
+          ref="${GITHUB_REF}"
+          branch=${{ needs.group_targets.outputs.branchname  }}
+          location="$branch"
+
+          if [[ "$branch" == "main" ]]; then
+            location="master"
+          fi
+
+          if [[ "$ref" == refs/tags/v[0-9]* ]]; then
+            tag="${ref#refs/tags/}"
+            location="$tag"
+          fi
+
+          echo "uploadlocation=$location" >> $GITHUB_OUTPUT
+
+      - name: Uploading Artifacts to S3 [${{ steps.upload-location.outputs.uploadlocation }}]
         uses: jakejarvis/s3-sync-action@master
         with:
           args: --acl public-read
@@ -143,25 +213,30 @@ jobs:
           AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
           AWS_REGION: 'us-west-1'
           SOURCE_DIR: artifacts/
-          DEST_DIR: Firmware/${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}/
+          DEST_DIR: Firmware/${{ steps.upload-location.outputs.uploadlocation }}/
 
-  release:
-    name: Create Release and Upload Artifacts
-    permissions:
-      contents: write
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/')
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
+      # if we are uploading artifacts to a versioned folder
+      # we should also update the stable folder in the s3 bucket
+      - name: Uploading Artifacts to S3 [stable]
+        uses: jakejarvis/s3-sync-action@master
+        if: startsWith(github.ref, 'refs/tags/v')
         with:
-          path: artifacts/
-          merge-multiple: true
+          args: --acl public-read
+        env:
+          AWS_S3_BUCKET: 'px4-travis'
+          AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+          AWS_REGION: 'us-west-1'
+          SOURCE_DIR: artifacts/
+          DEST_DIR: Firmware/stable/
 
-      - name: Upload Binaries to Release
+      # if build is a release triggered by a versioned tag then create a github release
+      # and upload the build artifacts. A draft release is created so that the release
+      # can be reviewed before publishing
+      - name: Upload Artifacts to GitHub Release
         uses: softprops/action-gh-release@v2
+        if: startsWith(github.ref, 'refs/tags/v')
         with:
           draft: true
           files: artifacts/*.px4
+          name: ${{ steps.upload-location.outputs.uploadlocation }}

.github/workflows/cflite_batch.yml

@@ -1,34 +0,0 @@
-name: ClusterFuzzLite batch fuzzing
-on:
-  schedule:
-    - cron: '0 6 * * *'  # UTC 6am every day.
-permissions: read-all
-jobs:
-  BatchFuzzing:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        sanitizer:
-        - address
-        - undefined
-        - memory
-    steps:
-    - name: Build Fuzzers (${{ matrix.sanitizer }})
-      id: build
-      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
-      with:
-        sanitizer: ${{ matrix.sanitizer }}
-    - name: Run Fuzzers (${{ matrix.sanitizer }})
-      id: run
-      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
-      with:
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-        fuzz-seconds: 1800 # 30 mins
-        mode: 'batch'
-        sanitizer: ${{ matrix.sanitizer }}
-        # Optional but recommended: For storing certain artifacts from fuzzing.
-        # See later section on "Git repo for storage".
-        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
-        # storage-repo-branch: main   # Optional. Defaults to "main"
-        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".

.github/workflows/checks.yml

@@ -6,13 +6,15 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:
@@ -41,7 +43,7 @@ jobs:
       - name: Building [${{ matrix.check }}]
         uses: addnab/docker-run-action@v3
         with:
-          image: px4io/px4-dev-nuttx-focal:2022-08-12
+          image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
           options: -v ${{ github.workspace }}:/workspace
           run: |
             cd /workspace

.github/workflows/clang-tidy.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 jobs:
   build:
     runs-on: ubuntu-latest
@@ -21,7 +19,7 @@ jobs:
       with:
         fetch-depth: 0
 
-    - name: Testing (clang-tidy-quiet)
+    - name: Testing (clang-tidy)
       uses: addnab/docker-run-action@v3
       with:
         image: px4io/px4-dev-clang:2021-09-08
@@ -29,4 +27,4 @@ jobs:
         run: |
           cd /workspace
           git config --global --add safe.directory /workspace
-          make clang-tidy-quiet
+          make clang-tidy

.github/workflows/compile_macos.yml

@@ -6,13 +6,15 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:
@@ -32,7 +34,8 @@ jobs:
     - uses: actions/checkout@v4
 
     - name: setup
-      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
+      run: |
+        ./Tools/setup/macos.sh
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp

.github/workflows/compile_ubuntu.yml

@@ -9,17 +9,19 @@ on:
       - 'release/**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-      - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 env:
   RUNS_IN_DOCKER: true
 
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
 jobs:
   build_and_test:
     name: Build and Test
@@ -27,7 +29,7 @@ jobs:
       fail-fast: false
       matrix:
         version: ['ubuntu:22.04', 'ubuntu:24.04']
-    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
     container:
       image: ${{ matrix.version }}
       volumes:

.github/workflows/dev_container.yml

@@ -11,7 +11,7 @@ on:
       - 'v*'
   pull_request:
     branches:
-      - '*'
+      - '**'
     paths:
       - '.github/workflows/dev_container.yml'
       - 'Tools/setup/ubuntu.sh'
@@ -30,12 +30,16 @@ on:
         type: boolean
         default: false
 
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
 jobs:
   setup:
     name: Set Tags and Variables
     permissions:
       contents: read
-    runs-on: [runs-on,"runner=1cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,"runner=1cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
     outputs:
       px4_version: ${{ steps.px4_version.outputs.px4_version }}
       meta_tags: ${{ steps.meta.outputs.tags }}
@@ -83,7 +87,7 @@ jobs:
           - platform: linux/amd64
             arch: amd64
             runner: x64
-    runs-on: [runs-on,"runner=8cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,"runner=4cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
     steps:
       - uses: runs-on/action@v1
       - uses: actions/checkout@v4
@@ -126,15 +130,15 @@ jobs:
           load: false
           push: ${{ startsWith(github.ref, 'refs/tags/') || (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_registry) }}
           provenance: false
-          cache-from: type=gha,version=1
-          cache-to: type=gha,version=1,mode=max
+          cache-from: type=gha,version=1,scope=${{ matrix.arch }}
+          cache-to: type=gha,version=1,mode=max,scope=${{ matrix.arch }}
 
   deploy:
     name: Deploy To Registry
     permissions:
       contents: read
       packages: write
-    runs-on: [runs-on,"runner=8cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,"runner=4cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
     needs: [build, setup]
     if: ${{ startsWith(github.ref, 'refs/tags/') || (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_registry) }}
     steps:

.github/workflows/docs_deploy.yml

@@ -1,19 +1,6 @@
-name: Docs - Deploy PX4 User Guide
+name: Docs - Deploy PX4 User Guide to Github pages (Manual)
 
 on:
-  push:
-    branches:
-      - 'main'
-      - 'release/**'
-    paths:
-      - 'docs/en/**'
-  pull_request:
-    branches:
-      - '*'
-    paths:
-      - 'docs/en/**'
-
-  # Allows you to run this workflow manually from the Actions tab
   workflow_dispatch:
 
 # Sets permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
@@ -33,7 +20,7 @@ env:
 
 jobs:
   build:
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
     steps:
       - uses: runs-on/action@v1
       - name: Checkout
@@ -68,7 +55,7 @@ jobs:
   deploy:
     if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
     needs: build
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
 
     steps:
       - name: Download Artifact
@@ -80,7 +67,7 @@ jobs:
       - name: Deploy
         run: |
           git clone --single-branch --branch main --depth 1 https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/docs.px4.io.git
-          # make it an orphan branch      
+          # make it an orphan branch
           cd docs.px4.io
           CURRENT_DATETIME=$(date +'%Y%m%d_%H_%M')
           git checkout --orphan "${CURRENT_DATETIME}_main"

.github/workflows/docs_deploy_aws.yml

@@ -0,0 +1,116 @@
+name: Docs - Deploy PX4 User Guide to AWS
+
+on:
+  push:
+    branches:
+      - "main"
+      - "release/**"
+    paths:
+      - "docs/en/**"
+      - "docs/zh/**"
+      - "docs/uk/**"
+      - "docs/ko/**"
+  pull_request:
+    paths:
+      - "docs/en/**"
+      - "docs/zh/**"
+      - "docs/uk/**"
+      - "docs/ko/**"
+
+  workflow_dispatch:
+
+permissions:
+  contents: read
+  actions: read
+  id-token: write # for AWS OIDC
+
+concurrency:
+  group: docs-deploy
+  cancel-in-progress: false
+
+jobs:
+  build:
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    outputs:
+      branchname: ${{ steps.set-branch.outputs.branchname }}
+      releaseversion: ${{ steps.set-version.outputs.releaseversion }}
+    steps:
+      - uses: runs-on/action@v1
+
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - id: set-branch
+        run: echo "branchname=${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}" >> $GITHUB_OUTPUT
+
+      - id: set-version
+        run: |
+          branch="${{ steps.set-branch.outputs.branchname }}"
+          if [[ "$branch" == "main" ]]; then
+            version="main"
+          else
+            version="v${branch#release/}"
+          fi
+          echo "releaseversion=$version" >> $GITHUB_OUTPUT
+
+      - name: Setup Node
+        uses: actions/setup-node@v4
+        with:
+          node-version: 20
+          cache: npm
+          cache-dependency-path: ./docs/yarn.lock
+
+      - name: Install dependencies
+        run: yarn install --frozen-lockfile --cwd ./docs
+
+      - name: Build with VitePress
+        working-directory: ./docs
+        env:
+          BRANCH_NAME: ${{ steps.set-version.outputs.releaseversion }}
+        run: |
+          npm run docs:build_ubuntu
+          touch .vitepress/dist/.nojekyll
+          npm run docs:sitemap
+
+      - name: Upload artifact
+        if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
+        uses: actions/upload-artifact@v4
+        with:
+          name: px4_docs_build
+          path: docs/.vitepress/dist/
+          retention-days: 1
+
+  deploy:
+    if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
+    needs: build
+    runs-on: ubuntu-latest
+
+    steps:
+      - name: Download Artifact
+        uses: actions/download-artifact@v4
+        with:
+          name: px4_docs_build
+          path: ~/_book
+
+      - name: Configure AWS from OIDC
+        uses: aws-actions/configure-aws-credentials@v4
+        with:
+          role-to-assume: ${{ secrets.AWS_ROLE_ARN }}
+          aws-region: us-west-2
+
+      - name: Sanity check AWS credentials
+        run: aws sts get-caller-identity
+
+      - name: Upload HTML with short cache
+        run: |
+          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
+            --delete \
+            --exclude "*" --include "*.html" \
+            --cache-control "public, max-age=60"
+
+      - name: Upload assets with long cache
+        run: |
+          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
+            --delete \
+            --exclude "*.html" \
+            --cache-control "public, max-age=86400, immutable"

.github/workflows/docs_flaw_checker.yml

@@ -29,7 +29,7 @@ jobs:
 
       - name: Get changed english doc files
         id: get_changed_markdown_english
-        uses: tj-actions/changed-files@v35.9.2
+        uses: tj-actions/changed-files@v46.0.5
         with:
           json: true
           base_sha: "${{ github.event.pull_request.base.sha }}"
@@ -42,14 +42,24 @@ jobs:
 
       - name: Save JSON file containing files to link check
         run: |
-          echo "${{ steps.get_changed_markdown_english.outputs.all_changed_files }}"
-          echo "${{ steps.get_changed_markdown_english.outputs.all_changed_files }}" > ./logs/prFiles.json
+          echo "$ALL_CHANGED_FILES"
+          # echo "$ALL_CHANGED_FILES" > ./logs/prFiles.json
+          echo "$ALL_CHANGED_FILES" | sed 's/\\//g' | jq '.' > ./logs/prFiles.json
+        env:
+          ALL_CHANGED_FILES: ${{ steps.get_changed_markdown_english.outputs.all_changed_files }}
 
       - name: Run link checker
         id: link-check
         run: |
           npm -g install markdown_link_checker_sc@0.0.138
-          markdown_link_checker_sc -r ${{ github.workspace }} -d docs -e en -f ./logs/prFiles.json -i assets -u docs.px4.io/main/ > ./logs/errorsFilteredByPrPages.md
+          markdown_link_checker_sc \
+            -r "$GITHUB_WORKSPACE" \
+            -d docs \
+            -e en \
+            -f ./logs/prFiles.json \
+            -i assets \
+            -u docs.px4.io/main/ \
+            > ./logs/errorsFilteredByPrPages.md
           mkdir -p ./pr
           cp ./logs/errorsFilteredByPrPages.md ./pr/errorsFilteredByPrPages.md
 
@@ -60,14 +70,15 @@ jobs:
           path: ./logs/errorsFilteredByPrPages.md
 
       - name: Echo Errors by Page
-        run: echo "${{ steps.read-errors-by-page.outputs.content }}"
+        run: echo "$ERRORS"
+        env:
+          ERRORS: ${{ steps.read-errors-by-page.outputs.content }}
 
       - name: Save PR number
+        run: echo "$PR_NUMBER" > ./pr/pr_number
         env:
           PR_NUMBER: ${{ github.event.number }}
-        run: |
-          #mkdir -p ./pr
-          echo $PR_NUMBER > ./pr/pr_number
+
       - uses: actions/upload-artifact@v4
         with:
           name: pr_number

.github/workflows/docs_pr_comment.yml

@@ -4,6 +4,7 @@ on:
     workflows: ["Docs - Check for flaws in PX4 Guide Source"]
     types:
       - completed
+
 jobs:
   comment:
     permissions:
@@ -56,8 +57,11 @@ jobs:
 
       - name: File detail info
         run: |
-          echo "${{ steps.read-errors-by-page.outputs.content }}"
-          echo "${{ steps.read-error-pr-number.outputs.content }}"
+          echo "$ERRORS"
+          echo "$PRNUM"
+        env:
+          ERRORS: ${{ steps.read-errors-by-page.outputs.content }}
+          PRNUM: ${{ steps.read-error-pr-number.outputs.content }}
 
       - name: Create or update comment
         id: comment_to_pr

.github/workflows/ekf_functional_change_indicator.yml

@@ -3,10 +3,14 @@ name: EKF Change Indicator
 on:
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+# If two events are triggered within a short time in the same PR, cancel the run of the oldest event
+concurrency:
+  group: ${{ github.workflow }}-${{ github.event.pull_request.number }}
+  cancel-in-progress: true
 
 jobs:
   unit_tests:
@@ -19,7 +23,7 @@ jobs:
     - name: main test
       uses: addnab/docker-run-action@v3
       with:
-        image: px4io/px4-dev-base-focal:2021-09-08
+        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
         options: -v ${{ github.workspace }}:/workspace
         run: |
           cd /workspace

.github/workflows/ekf_update_change_indicator.yml

@@ -4,7 +4,6 @@ on:
   push:
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   unit_tests:
@@ -20,7 +19,7 @@ jobs:
     - name: main test
       uses: addnab/docker-run-action@v3
       with:
-        image: px4io/px4-dev-base-focal:2021-09-08
+        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
         options: -v ${{ github.workspace }}:/workspace
         run: |
           cd /workspace

.github/workflows/failsafe_sim.yml

@@ -6,13 +6,15 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:
@@ -27,7 +29,7 @@ jobs:
           "failsafe_web",
         ]
     container:
-      image: px4io/px4-dev:v1.16.0-ondemand
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
       - name: Install Node v20.18.0
@@ -46,6 +48,7 @@ jobs:
         run: |
           git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
           cd _emscripten_sdk
+          git checkout 4.0.15
           ./emsdk install latest
           ./emsdk activate latest
 

.github/workflows/flash_analysis.yml

@@ -11,13 +11,11 @@ on:
       - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-      - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 env:
   MIN_FLASH_POS_DIFF_FOR_COMMENT: 50
@@ -26,9 +24,9 @@ env:
 jobs:
   analyze_flash:
     name: Analyzing ${{ matrix.target }}
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
     container:
-      image: px4io/px4-dev:v1.16.0-ondemand
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
     strategy:
       matrix:
         target: [px4_fmu-v5x, px4_fmu-v6x]
@@ -56,6 +54,7 @@ jobs:
         run: |
           make clean
           make distclean
+          make submodulesclean
 
       - name: If it's a PR checkout the base branch
         if: ${{ github.event.pull_request }}
@@ -99,7 +98,7 @@ jobs:
   # Track this issue https://github.com/PX4/PX4-Autopilot/issues/24408
   post_pr_comment:
     name: Publish Results
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}"]
     needs: [analyze_flash]
     env:
       V5X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-absolute) }}

.github/workflows/fuzzing.yml

@@ -0,0 +1,49 @@
+name: Fuzzing
+on:
+  schedule:
+    - cron: '0 6 * * *'  # UTC 6am every day.
+
+permissions:
+  contents: read
+  issues: write # for JasonEtco/create-an-issue
+
+env:
+  RUNS_IN_DOCKER: true
+
+jobs:
+  Fuzzing:
+    runs-on: ubuntu-latest
+    container:
+      image: px4io/px4-dev:v1.16.0-rc2-4-gb67c65bfe6
+    steps:
+      - name: Install Dependencies
+        run: |
+          apt update && apt install -y clang
+
+      - name: Fix git in Container
+        run: |
+          git config --global --add safe.directory $(realpath .)
+
+      - uses: actions/checkout@v4
+
+      - name: Build and Run Fuzz Tests
+        run: |
+          # Only build the tests
+          export CC=clang
+          export CXX=clang++
+          make tests TESTFILTER=__no_tests__
+
+          # Run the fuzz tests
+          for fuzz_binary in build/px4_sitl_test/*fuzz*; do
+            ./Tools/ci/run_fuzz_tests.sh $fuzz_binary 15m
+          done
+
+      # Create a github issue in case of a failure
+      - name: Create Issue
+        if: ${{ failure() }}
+        uses: JasonEtco/create-an-issue@v2
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          WORKFLOW_RUN_URL: https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }}
+        with:
+          filename: .github/fuzzing_issue_template.md

.github/workflows/itcm_check.yml

@@ -0,0 +1,67 @@
+name: ITCM check
+
+permissions:
+  contents: read
+
+on:
+  push:
+    branches:
+      - 'main'
+    paths-ignore:
+      - 'docs/**'
+  pull_request:
+    branches:
+      - '**'
+    paths-ignore:
+      - 'docs/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
+jobs:
+  check_itcm:
+    name: Checking ${{ matrix.target }}
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    container:
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          - target: px4_fmu-v5x
+            scripts: >
+              boards/px4/fmu-v5x/nuttx-config/scripts/itcm_gen_functions.ld
+              boards/px4/fmu-v5x/nuttx-config/scripts/itcm_static_functions.ld
+          - target: px4_fmu-v6xrt
+            scripts: >
+              boards/px4/fmu-v6xrt/nuttx-config/scripts/itcm_functions_includes.ld
+              boards/px4/fmu-v6xrt/nuttx-config/scripts/itcm_static_functions.ld
+          - target: nxp_tropic-community
+            scripts: >
+              boards/nxp/tropic-community/nuttx-config/scripts/itcm_functions_includes.ld
+              boards/nxp/tropic-community/nuttx-config/scripts/itcm_static_functions.ld
+          - target: nxp_mr-tropic
+            scripts: >
+              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_functions_includes.ld
+              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_static_functions.ld
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+          submodules: recursive
+
+      - name: Git ownership workaround
+        run: git config --system --add safe.directory '*'
+
+      - name: Build Target
+        run: make ${{ matrix.target }}
+
+      - name: Copy built ELF
+        run: cp ./build/**/*.elf ./built.elf
+
+      - name: Install itcm-check dependencies
+        run: pip3 install -r Tools/setup/optional-requirements.txt --break-system-packages
+
+      - name: Execute the itcm-check
+        run: python3 Tools/itcm_check.py --elf-file built.elf --script-files ${{ matrix.scripts }}

.github/workflows/label.yml

@@ -0,0 +1,21 @@
+# This workflow will triage pull requests and apply a label based on the
+# paths that are modified in the pull request.
+# The paths are set up in .github/labeler.yml
+#
+# See: https://github.com/actions/labeler
+
+name: Labeler
+on: [pull_request_target]
+
+jobs:
+  label:
+
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      pull-requests: write
+
+    steps:
+    - uses: actions/labeler@v5
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/mavros_mission_tests.yml

@@ -6,13 +6,15 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:
@@ -22,7 +24,6 @@ jobs:
       matrix:
         config:
           - {vehicle: "iris",          mission: "MC_mission_box"}
-          - {vehicle: "rover",         mission: "rover_mission_1"}
 
     steps:
     - uses: actions/checkout@v4

.github/workflows/mavros_offboard_tests.yml

@@ -6,13 +6,15 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:

.github/workflows/nuttx_env_config.yml

@@ -6,13 +6,15 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:
@@ -31,7 +33,7 @@ jobs:
     - name: Build PX4 and Run Test [${{ matrix.config }}]
       uses: addnab/docker-run-action@v3
       with:
-        image: px4io/px4-dev:v1.16.0-ondemand
+        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
         options: -v ${{ github.workspace }}:/workspace
         run: |
           cd /workspace

.github/workflows/python_checks.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/ros_integration_tests.yml

@@ -11,17 +11,19 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     container:
       image: px4io/px4-dev-ros2-galactic:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
@@ -33,6 +35,12 @@ jobs:
     - name: Git Ownership Workaround
       run: git config --system --add safe.directory '*'
 
+    - name: Update ROS Keys
+      run: |
+        sudo rm /etc/apt/sources.list.d/ros2.list && \
+        sudo curl -sSL https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -o /usr/share/keyrings/ros-archive-keyring.gpg && \
+        echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/ros-archive-keyring.gpg] http://packages.ros.org/ros2/ubuntu $(. /etc/os-release && echo $UBUNTU_CODENAME) main" | sudo tee /etc/apt/sources.list.d/ros2.list > /dev/null
+
     - name: Install gazebo
       run: |
         apt update && apt install -y gazebo11 libgazebo11-dev gstreamer1.0-plugins-bad gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly libgstreamer-plugins-base1.0-dev
@@ -82,6 +90,9 @@ jobs:
         mkdir -p /opt/px4_ws/src
         cd /opt/px4_ws/src
         git clone --recursive https://github.com/Auterion/px4-ros2-interface-lib.git
+        # Ignore python packages due to compilation issue (can be enabled when updating ROS)
+        touch px4-ros2-interface-lib/px4_ros2_py/COLCON_IGNORE || true
+        touch px4-ros2-interface-lib/examples/python/COLCON_IGNORE || true
         cd ..
         # Copy messages to ROS workspace
         "${PX4_DIR}/Tools/copy_to_ros_ws.sh" "$(pwd)"

.github/workflows/ros_translation_node.yml

@@ -5,20 +5,23 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 defaults:
   run:
     shell: bash
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
+
 jobs:
   build_and_test:
     name: Build and test
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
     strategy:
       fail-fast: false
       matrix:

.github/workflows/sitl_tests.yml

@@ -11,18 +11,20 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+    - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: true
 
 jobs:
   build:
     name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     container:
       image: px4io/px4-dev-simulation-focal:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
@@ -116,7 +118,7 @@ jobs:
           PX4_HOME_LON: ${{matrix.config.longitude}}
           PX4_HOME_ALT: ${{matrix.config.altitude}}
           PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose --force-color
+        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} test/mavsdk_tests/configs/sitl.json --verbose --force-color
         timeout-minutes: 45
 
       - name: Upload failed logs

.github/workflows/stale.yml

@@ -7,10 +7,15 @@ jobs:
   stale:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/stale@v8
+      - uses: actions/stale@v10
         with:
-          days-before-stale: 30
-          days-before-close: -1
+          operations-per-run: 250
+          days-before-stale: 90
+          days-before-close: 30
           stale-issue-label: 'stale'
           stale-pr-label: 'stale'
           remove-stale-when-updated: true
+          stale-issue-message: ''
+          close-issue-message: 'This issue has been automatically closed due to 120 days of inactivity. If you believe this is still relevant, please feel free to reopen it or create a new issue.'
+          stale-pr-message: ''
+          close-pr-message: 'This pull request has been automatically closed due to 120 days of inactivity. If you would like to continue, please feel free to reopen it or submit a new PR.'

.github/workflows/sync_to_px4_msgs.yml

@@ -0,0 +1,62 @@
+name: Sync ROS 2 messages to px4_msgs
+on:
+  push:
+    branches:
+      - 'main'
+      - 'stable'
+      - 'beta'
+      - 'release/**'
+    paths:
+      - 'msg/**'
+      - 'srv/**'
+  workflow_dispatch:
+
+permissions:
+  contents: read
+
+jobs:
+  sync_to_px4_msgs:
+    if: github.repository == 'PX4/PX4-Autopilot'
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    steps:
+      - name: Checkout PX4 repo
+        uses: actions/checkout@v4
+
+      - name: Setup git credentials
+        run: |
+          git config --global user.name "${{ secrets.PX4BUILDBOT_USER }}"
+          git config --global user.email "${{ secrets.PX4BUILDBOT_EMAIL }}"
+
+      - name: Clone PX4_msgs repo
+        run: |
+          git clone https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/px4_msgs.git
+
+      - name: Check out the same branch as the PX4 repo
+        run: |
+          cd px4_msgs
+          if git checkout ${{ github.ref_name }}; then
+            echo "Checked out existing branch"
+          else
+            git checkout -b ${{ github.ref_name }}
+          fi
+
+      - name: Copy ROS 2 messages
+        run: |
+          rm -f px4_msgs/msg/*.msg
+          rm -f px4_msgs/msg/versioned/*.msg
+          rm -f px4_msgs/srv/*.srv
+          rm -f px4_msgs/srv/versioned/*.srv
+          cp msg/*.msg px4_msgs/msg/
+          cp msg/versioned/*.msg px4_msgs/msg/ || true
+          cp srv/*.srv px4_msgs/srv/
+          cp srv/versioned/*.srv px4_msgs/srv/ || true
+
+      - name: Commit and push changes
+        run: |
+          cd px4_msgs
+          git status
+          git add .
+          git commit -a -m "Update to PX4 ${{ github.sha }}" || true
+          git push origin ${{ github.ref_name }} || true
+          cd ..
+          rm -rf px4_msgs

.gitmodules

@@ -89,3 +89,23 @@
 [submodule "src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan"]
 	path = src/drivers/uavcan/libdronecan/libuavcan/dsdl_compiler/pydronecan
 	url = https://github.com/dronecan/pydronecan
+[submodule "test/fuzztest"]
+	path = test/fuzztest
+	url = https://github.com/google/fuzztest.git
+	branch = main
+[submodule "src/lib/tensorflow_lite_micro/tflite_micro"]
+	path = src/lib/tensorflow_lite_micro/tflite_micro
+	url = https://github.com/PX4/tflite-micro.git
+	branch = main
+[submodule "src/drivers/ins/microstrain/mip_sdk"]
+	path = src/drivers/ins/microstrain/mip_sdk
+	url = https://github.com/PX4/LORD-MicroStrain_mip_sdk.git
+[submodule "src/drivers/ins/sbgecom/sbgECom"]
+	path = src/drivers/ins/sbgecom/sbgECom
+	url = https://github.com/PX4/sbgECom.git
+[submodule "src/modules/mc_raptor/blob"]
+	path = src/modules/mc_raptor/blob
+	url = https://github.com/rl-tools/px4-blob
+[submodule "src/lib/rl_tools/rl_tools"]
+	path = src/lib/rl_tools/rl_tools
+	url = https://github.com/rl-tools/rl-tools.git

.vscode/cmake-variants.yaml

@@ -6,6 +6,21 @@ CONFIG:
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
+    px4_sitl_raptor:
+      short: px4_sitl_raptor
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_raptor
+    px4_sitl_raptor_debug:
+      short: px4_sitl_raptor_debug
+      buildType: Debug
+      settings:
+        CONFIG: px4_sitl_raptor
+    px4_sitl_spacecraft:
+      short: px4_sitl_spacecraft
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_spacecraft
     px4_sitl_nolockstep:
       short: px4_sitl_nolockstep
       buildType: RelWithDebInfo
@@ -31,6 +46,11 @@ CONFIG:
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_test
+    px4_sitl_zenoh:
+      short: px4_sitl_zenoh
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_test
     px4_io-v2_default:
       short: px4_io-v2
       buildType: MinSizeRel
@@ -131,6 +151,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-flow_canbootloader
+    ark_can-flow-mr_default:
+      short: ark_can-flow-mr_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-flow-mr_default
     ark_can-flow-mr_canbootloader:
       short: ark_can-flow-mr_canbootloader
       buildType: MinSizeRel
@@ -186,6 +211,26 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_cannode_canbootloader
+    ark_dist_default:
+      short: ark_dist_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_dist_default
+    ark_dist_canbootloader:
+      short: ark_dist_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_dist_canbootloader
+    ark_f9p-gps_default:
+      short: ark_f9p-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_f9p-gps_default
+    ark_f9p-gps_canbootloader:
+      short: ark_f9p-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_f9p-gps_canbootloader
     ark_fmu-v6x_bootloader:
       short: ark_fmu-v6x_bootloader
       buildType: MinSizeRel
@@ -206,6 +251,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_fpv_default
+    ark_mag_canbootloader:
+      short: ark_mag_canbootloader
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: ark_mag_canbootloader
+    ark_mag_default:
+      short: ark_mag_default
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: ark_mag_default
     ark_pi6x_bootloader:
       short: ark_pi6x_bootloader
       buildType: MinSizeRel
@@ -216,6 +271,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_pi6x_default
+    ark_x20-gps_default:
+      short: ark_x20-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_x20-gps_default
+    ark_x20-gps_canbootloader:
+      short: ark_x20-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_x20-gps_canbootloader
     atl_mantis-edu_default:
       short: atl_mantis-edu
       buildType: MinSizeRel
@@ -261,6 +326,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_7-nano_default
+    cuav_fmu-v6x_default:
+      short: cuav_fmu-v6x
+      buildType: MinSizeRel
+      settings:
+        CONFIG: cuav_fmu-v6x_default
+    cuav_x25_default:
+      short: cuav_x25-evo
+      buildType: MinSizeRel
+      settings:
+        CONFIG: cuav_x25-evo_default
     cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
@@ -301,6 +376,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: holybro_durandal-v1_default
+    holybro_kakuteh7-wing_default:
+      short: holybro_kakuteh7-wing
+      buildType: MinSizeRel
+      settings:
+        CONFIG: holybro_kakuteh7-wing_default
     holybro_kakuteh7dualimu_default:
       short: holybro_kakuteh7dualimu
       buildType: MinSizeRel
@@ -351,6 +431,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: micoair_h743-v2_default
+    micoair_h743-lite_bootloader:
+      short: micoair_h743-lite_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-lite_bootloader
+    micoair_h743-lite_default:
+      short: micoair_h743-lite
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-lite_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel
@@ -401,6 +491,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_mr-canhubk3_fmu
+    nxp_mr-tropic_default:
+      short: nxp_mr-tropic_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_mr-tropic_default
+    nxp_mr-tropic_bootloader:
+      short: nxp_mr-tropic_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_mr-tropic_bootloader
     nxp_tropic-community_default:
       short: nxp_tropic-community_default
       buildType: MinSizeRel
@@ -431,3 +531,23 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: x-mav_ap-h743v2_default
+    svehicle_e2_bootloader:
+      short: svehicle_e2_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: svehicle_e2_bootloader
+    svehicle_e2_default:
+      short: svehicle_e2
+      buildType: MinSizeRel
+      settings:
+        CONFIG: svehicle_e2_default
+    x-mav_ap-h743r1_bootloader:
+      short: x-mav_ap-h743r1-boot
+      buildType: MinSizeRel
+      settings:
+        CONFIG: x-mav_ap-h743r1_bootloader
+    x-mav_ap-h743r1_default:
+      short: x-mav_ap-h743r1
+      buildType: MinSizeRel
+      settings:
+        CONFIG: x-mav_ap-h743r1_default

.vscode/settings.json

@@ -43,7 +43,7 @@
         "files.watcherExclude": {
                 "**/build/**": true
         },
-        "git.detectSubmodulesLimit": 20,
+        "git.detectSubmodulesLimit": 25,
         "git.ignoreLimitWarning": true,
         "githubPullRequests.defaultMergeMethod": "squash",
         "githubPullRequests.telemetry.enabled": false,

CMakeLists.txt

@@ -267,7 +267,7 @@ endif()
 
 set(package-contact "px4users@googlegroups.com")
 
-set(CMAKE_CXX_STANDARD 14)
+set(CMAKE_CXX_STANDARD 17)
 set(CMAKE_CXX_STANDARD_REQUIRED ON)
 set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)
@@ -334,6 +334,33 @@ if(NOT PX4_CHIP)
 	message(FATAL_ERROR "px4_os_determine_build_chip() needs to set PX4_CHIP")
 endif()
 
+#=============================================================================
+# Testing - Automatic unit and integration testing with CTest
+# (Needs to be before setting the common compile flags)
+#
+
+# optionally enable cmake testing (supported only on posix)
+option(CMAKE_TESTING "Configure test targets" OFF)
+if(${PX4_CONFIG} STREQUAL "px4_sitl_test")
+	set(CMAKE_TESTING ON)
+endif()
+if(CMAKE_TESTING)
+	include(CTest) # sets BUILD_TESTING variable
+endif()
+
+# enable test filtering to run only specific tests with the ctest -R regex functionality
+set(TESTFILTER "" CACHE STRING "Filter string for ctest to selectively only run specific tests (ctest -R)")
+
+include(px4_add_gtest)
+if(BUILD_TESTING)
+	# Setting FUZZTEST_FUZZING_MODE=on enables ASAN, and is only supported with Clang
+	if (("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang") OR ("${CMAKE_CXX_COMPILER_ID}" MATCHES "AppleClang"))
+		set(FUZZTEST_FUZZING_MODE ON)
+	endif()
+	add_subdirectory(test)
+	fuzztest_setup_fuzzing_flags()
+endif()
+
 #=============================================================================
 # build flags
 #
@@ -386,47 +413,6 @@ if (NOT EXTERNAL_MODULES_LOCATION STREQUAL "")
 	endforeach()
 endif()
 
-#=============================================================================
-# Testing - Automatic unit and integration testing with CTest
-#
-
-# optionally enable cmake testing (supported only on posix)
-option(CMAKE_TESTING "Configure test targets" OFF)
-if(${PX4_CONFIG} STREQUAL "px4_sitl_test")
-	set(CMAKE_TESTING ON)
-endif()
-if(CMAKE_TESTING)
-	include(CTest) # sets BUILD_TESTING variable
-endif()
-
-# enable test filtering to run only specific tests with the ctest -R regex functionality
-set(TESTFILTER "" CACHE STRING "Filter string for ctest to selectively only run specific tests (ctest -R)")
-
-# if testing is enabled download and configure gtest
-list(APPEND CMAKE_MODULE_PATH ${PX4_SOURCE_DIR}/cmake/gtest/)
-include(px4_add_gtest)
-if(BUILD_TESTING)
-	include(gtest)
-
-	# Ensure there's no -R without any filter expression since that trips newer ctest versions
-	if(TESTFILTER)
-		set(TESTFILTERARG "-R")
-	else()
-		set(TESTFILTERARG "")
-	endif()
-
-	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test ${TESTFILTERARG} ${TESTFILTER}
-			DEPENDS
-				px4
-				examples__dyn_hello
-			USES_TERMINAL
-			COMMENT "Running tests"
-			WORKING_DIRECTORY ${PX4_BINARY_DIR})
-	set_target_properties(test_results PROPERTIES EXCLUDE_FROM_ALL TRUE)
-endif()
-
-
 #=============================================================================
 # subdirectories
 #
@@ -496,7 +482,6 @@ add_custom_target(uorb_graph DEPENDS ${uorb_graph_config})
 include(bloaty)
 
 
-include(doxygen)
 include(metadata)
 include(package)
 

CTestConfig.cmake

@@ -1,15 +0,0 @@
-## This file should be placed in the root directory of your project.
-## Then modify the CMakeLists.txt file in the root directory of your
-## project to incorporate the testing dashboard.
-##
-## # The following are required to submit to the CDash dashboard:
-##   ENABLE_TESTING()
-##   INCLUDE(CTest)
-
-set(CTEST_PROJECT_NAME "PX4 Firmware")
-set(CTEST_NIGHTLY_START_TIME "00:00:00 EST")
-
-set(CTEST_DROP_METHOD "http")
-set(CTEST_DROP_SITE "my.cdash.org")
-set(CTEST_DROP_LOCATION "/submit.php?project=PX4+Firmware")
-set(CTEST_DROP_SITE_CDASH TRUE)

Jenkinsfile

@@ -101,6 +101,7 @@ pipeline {
             echo $0;
             git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk;
             cd _emscripten_sdk;
+            git checkout 4.0.15;
             ./emsdk install latest;
             ./emsdk activate latest;
             cd ..;
@@ -220,36 +221,6 @@ pipeline {
           }
         }
 
-        stage('PX4 ROS msgs') {
-          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
-          }
-          steps {
-            sh('export')
-            sh('make distclean; git clean -ff -x -d .')
-            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
-              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
-              // 'main' branch
-              sh('rm -f px4_msgs/msg/*.msg')
-              sh('rm -f px4_msgs/msg/versioned/*.msg')
-              sh('rm -f px4_msgs/srv/*.srv')
-              sh('rm -f px4_msgs/srv/versioned/*.srv')
-              sh('cp msg/*.msg px4_msgs/msg/')
-              sh('cp msg/versioned/*.msg px4_msgs/msg/ || true')
-              sh('cp srv/*.srv px4_msgs/srv/')
-              sh('cp srv/versioned/*.srv px4_msgs/srv/ || true')
-              sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
-              sh('cd px4_msgs; git push origin main || true')
-              sh('rm -rf px4_msgs')
-            }
-          }
-          when {
-            anyOf {
-              branch 'main'
-            }
-          }
-        }
-
         stage('S3') {
           agent {
             docker { image 'px4io/px4-dev-base-focal:2021-08-18' }

Kconfig

@@ -73,6 +73,11 @@ menu "Toolchain"
         help
             relative path to the ROMFS root directory
 
+    config BOARD_ADDITIONAL_INIT
+        string "Additional init file"
+        help
+            additional configurable init file to include in the ROMFS
+
     config BOARD_IO
         string "IO board name"
         default "px4_io-v2_default"
@@ -206,8 +211,8 @@ source "src/examples/Kconfig"
 endmenu
 
 menu "platforms"
-depends on PLATFORM_QURT || PLATFORM_POSIX
-source "platforms/common/Kconfig"
+depends on PLATFORM_QURT || PLATFORM_POSIX || PLATFORM_NUTTX
+source "platforms/Kconfig"
 endmenu
 
 source "src/lib/*/Kconfig"

LICENSE

@@ -1,6 +1,6 @@
 BSD 3-Clause License
 
-Copyright (c) 2012 - 2023, PX4 Development Team
+Copyright (c) 2012 - 2025, PX4 Development Team
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

MAINTAINERS.md

@@ -7,33 +7,34 @@ See [the documentation on Maintainers](https://docs.px4.io/main/en/contribute/ma
 
 | Name                    | Sector | GitHub | Chat | email
 |-------------------------|--------|--------|------|----------------
-| Lorenz Meier | Founder | [LorenzMeier][LorenzMeier] |  | <lorenz@px4.io>
-| Daniel Agar | Architecture | [dagar][dagar] | daniel_agar | <daniel@agar.ca>
-| Beat Küng | Architecture | [bkueng][bkueng] | beatkueng | <beat-kueng@gmx.net>
-| Ramón Roche | CI / Testing | [mrpollo][mrpollo] | rroche | <rroche@linuxfoundation.org>
-| Mathieu Bresciani | State Estimation | [bresch][bresch] | mbresch |
-| Paul Riseborough | State Estimation | [priseborough][priseborough] |  |
-| David Sidrane | RTOS / NuttX | [davids5][davids5] | david_s5 | <David.Sidrane@Nscdg.com>
-| Jayoung Lim | Simulation | [Jaeyoung-Lim][Jaeyoung-Lim] | jaeyounglim. | <jalim@ethz.ch>
-| Beniamino Pozzan | ROS 2 | [beniaminopozzan][beniaminopozzan] | beniaminopozzan | <beniamino.pozzan@gmail.com>
-| Matthias Grob | Multirotor | [MaEtUgR][MaEtUgR] | maetugr |
-| Silvan Fuhrer | Fixed-Wing / VTOL | [sfuhrer][sfuhrer] | sfuhrer |
-| Christian Friedrich | Rover | [chfriedrich98][chfriedrich98] | christian982564 |
-| Pedro Roque | Spacecraft | [Pedro-Roque][Pedro-Roque] | .pedroroque | <padr@kth.se>
+| Lorenz Meier | Founder | [@LorenzMeier](https://github.com/LorenzMeier) |  | <lorenz@px4.io>
+| Daniel Agar | Architecture | [@dagar](https://github.com/dagar) | daniel_agar | <daniel@agar.ca>
+| Beat Küng | Architecture | [@bkueng](https://github.com/bkueng) | beatkueng | <beat-kueng@gmx.net>
+| Ramón Roche | CI / Testing | [@mrpollo](https://github.com/mrpollo) | rroche | <rroche@linuxfoundation.org>
+| Mathieu Bresciani | State Estimation | [@bresch](https://github.com/bresch) | mbresch |
+| Paul Riseborough | State Estimation | [@priseborough](https://github.com/priseborough) |  |
+| David Sidrane | RTOS / NuttX | [@davids5](https://github.com/davids5) | david_s5 | <David.Sidrane@Nscdg.com>
+| Jayoung Lim | Simulation | [@Jaeyoung-Lim](https://github.com/Jaeyoung-Lim) | jaeyounglim. | <jalim@ethz.ch>
+| Beniamino Pozzan | ROS 2 | [@beniaminopozzan](https://github.com/beniaminopozzan) | beniaminopozzan | <beniamino.pozzan@gmail.com>
+| Matthias Grob | Multirotor | [@MaEtUgR](https://github.com/MaEtUgR) | maetugr |
+| Silvan Fuhrer | Fixed-Wing / VTOL | [@sfuhrer](https://github.com/sfuhrer) | sfuhrer |
+| Christian Friedrich | Rover | [@chfriedrich98](https://github.com/chfriedrich98) | christian982564 |
+| Pedro Roque | Spacecraft | [@Pedro-Roque](https://github.com/Pedro-Roque) | .pedroroque | <roque@caltech.edu>
+| Jacob Dahl | Simulation | [@dakejahl](https://github.com/dakejahl) | dakejahl | <dahl.jakejacob@gmail.com>
 
 
 **Documentation Maintainers**
 
 | Name | GitHub | Chat | email
 |------|--------|------|----------------------
-| Hamish Willee  | [hamishwillee][hamishwillee] | hamishwillee |
+| Hamish Willee  | [@hamishwillee](https://github.com/hamishwillee) | hamishwillee |
 
 **Release Managers**
 
 | Name | GitHub | Chat | email
 |------|--------|------|----------------------
-| Ramón Roche | [mrpollo][mrpollo] | rroche | <rroche@linuxfoundation.org>
-| Daniel Agar | [dagar][dagar] | daniel_agar | <daniel@agar.ca>
+| Ramón Roche | [@mrpollo](https://github.com/mrpollo) | rroche | <rroche@linuxfoundation.org>
+| Daniel Agar | [@dagar](https://github.com/dagar) | daniel_agar | <daniel@agar.ca>
 
 **Retired Maintainers**
 

Makefile

@@ -160,11 +160,6 @@ else
 		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif
 
-	# Fuzz Testing
-	ifdef PX4_FUZZ
-		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
-	endif
-
 endif
 
 # Pick up specific Python path if set
@@ -330,9 +325,13 @@ bootloaders_update: \
 	ark_fmu-v6x_bootloader \
 	ark_fpv_bootloader \
 	ark_pi6x_bootloader \
+	auterion_fmu-v6s_bootloader \
+	auterion_fmu-v6x_bootloader \
 	cuav_nora_bootloader \
 	cuav_x7pro_bootloader \
 	cuav_7-nano_bootloader \
+	cuav_fmu-v6x_bootloader \
+	cuav_x25-evo_bootloader \
 	cubepilot_cubeorange_bootloader \
 	cubepilot_cubeorangeplus_bootloader \
 	hkust_nxt-dual_bootloader \
@@ -347,11 +346,13 @@ bootloaders_update: \
         micoair_h743_bootloader \
         micoair_h743-aio_bootloader \
 	micoair_h743-v2_bootloader \
+	micoair_h743-lite_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \
 	mro_ctrl-zero-h7-oem_bootloader \
 	mro_pixracerpro_bootloader \
+	narinfc_h7_bootloader \
 	px4_fmu-v6c_bootloader \
 	px4_fmu-v6u_bootloader \
 	px4_fmu-v6x_bootloader \
@@ -365,7 +366,7 @@ coverity_scan: px4_sitl_default
 
 # Documentation
 # --------------------------------------------------------------------
-.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata doxygen
+.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata
 
 parameters_metadata:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
@@ -381,12 +382,6 @@ extract_events:
 
 px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events
 
-doxygen:
-	@mkdir -p "$(SRC_DIR)"/build/doxygen
-	@cd "$(SRC_DIR)"/build/doxygen && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DBUILD_DOXYGEN=ON
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/doxygen
-	@touch "$(SRC_DIR)"/build/doxygen/Documentation/.nojekyll
-
 # Style
 # --------------------------------------------------------------------
 .PHONY: check_format format check_newlines
@@ -416,11 +411,18 @@ tests:
 	$(eval UBSAN_OPTIONS += color=always)
 	$(call cmake-build,px4_sitl_test)
 
+# work around lcov bug #316; remove once lcov is fixed (see https://github.com/linux-test-project/lcov/issues/316)
+LCOBUG = --ignore-errors mismatch
 tests_coverage:
 	@$(MAKE) clean
 	@$(MAKE) --no-print-directory tests PX4_CMAKE_BUILD_TYPE=Coverage
 	@mkdir -p coverage
-	@lcov --directory build/px4_sitl_test --base-directory build/px4_sitl_test --gcov-tool gcov --capture -o coverage/lcov.info
+	@lcov --directory build/px4_sitl_test \
+		--base-directory build/px4_sitl_test \
+		--gcov-tool gcov \
+		--capture \
+		$(LCOBUG) \
+		-o coverage/lcov.info
 
 
 rostest: px4_sitl_default
@@ -472,7 +474,7 @@ python_coverage:
 
 # static analyzers (scan-build, clang-tidy, cppcheck)
 # --------------------------------------------------------------------
-.PHONY: scan-build px4_sitl_default-clang clang-tidy clang-tidy-fix clang-tidy-quiet
+.PHONY: scan-build px4_sitl_default-clang clang-tidy clang-tidy-fix
 .PHONY: cppcheck shellcheck_all validate_module_configs
 
 scan-build:
@@ -498,10 +500,6 @@ clang-tidy: px4_sitl_default-clang
 clang-tidy-fix: px4_sitl_default-clang
 	@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && "$(SRC_DIR)"/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j_clang_tidy) -fix -p .
 
-# modified version of run-clang-tidy.py to return error codes and only output relevant results
-clang-tidy-quiet: px4_sitl_default-clang
-	@cd "$(SRC_DIR)"/build/px4_sitl_default-clang && "$(SRC_DIR)"/Tools/run-clang-tidy.py -header-filter=".*\.hpp" -j$(j_clang_tidy) -p .
-
 # TODO: Fix cppcheck errors then try --enable=warning,performance,portability,style,unusedFunction or --enable=all
 cppcheck: px4_sitl_default
 	@mkdir -p "$(SRC_DIR)"/build/cppcheck
@@ -516,6 +514,7 @@ validate_module_configs:
 	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
 	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
 	-not -path "$(SRC_DIR)/src/modules/uxrce_dds_client/dds_topics.yaml" \
+	-not -path "$(SRC_DIR)/src/modules/zenoh/dds_topics.yaml" \
 	-not -path "$(SRC_DIR)/src/modules/zenoh/zenoh-pico/*" \
 	-not -path "$(SRC_DIR)/src/lib/events/libevents/*" \
 	-not -path "$(SRC_DIR)/src/lib/cdrstream/*" \

ROMFS/CMakeLists.txt

@@ -85,10 +85,32 @@ endif()
 if(PX4_ETHERNET)
 	set(added_arguments ${added_arguments} --ethernet)
 endif()
+# Check if board has an rc.board_airframes file to filter airframes
+set(board_airframes_file "${PX4_BOARD_DIR}/init/rc.board_airframes")
+set(airframes_whitelist "")
+if(EXISTS "${board_airframes_file}")
+	message(STATUS "ROMFS: Using board-specific airframes list: ${board_airframes_file}")
+	file(STRINGS "${board_airframes_file}" airframes_whitelist)
+	# Remove comments and empty lines
+	list(FILTER airframes_whitelist EXCLUDE REGEX "^[ \t]*#")
+	list(FILTER airframes_whitelist EXCLUDE REGEX "^[ \t]*$")
+endif()
+
 # create list of relative romfs file names
 set(romfs_copy_files_relative)
 foreach(romfs_file IN LISTS romfs_copy_files)
 	string(REPLACE "${romfs_src_dir}/" "" romfs_file_rel ${romfs_file})
+
+	# If we have an airframes whitelist, filter airframe files
+	if(airframes_whitelist AND romfs_file_rel MATCHES "^init.d/airframes/")
+		# Extract just the filename
+		get_filename_component(airframe_name "${romfs_file_rel}" NAME)
+		# Check if it's in the whitelist
+		if(NOT "${airframe_name}" IN_LIST airframes_whitelist)
+			continue()
+		endif()
+	endif()
+
 	list(APPEND romfs_copy_files_relative ${romfs_file_rel})
 endforeach()
 # copy the ROMFS files by creating a tar and extracting it to the build
@@ -202,6 +224,31 @@ foreach(board_rc_file ${OPTIONAL_BOARD_RC})
 
 endforeach()
 
+if(config_additional_init)
+	if(EXISTS "${PX4_BOARD_DIR}/init/${config_additional_init}")
+		file(RELATIVE_PATH rc_file_relative ${PX4_SOURCE_DIR} ${PX4_BOARD_DIR}/init/${config_additional_init})
+		message(STATUS "ROMFS:  Adding ${rc_file_relative} -> /etc/init.d/rc.additional_init")
+
+		add_custom_command(
+			OUTPUT
+				${romfs_gen_root_dir}/init.d/rc.additional_init
+				${config_additional_init}.stamp
+			COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PX4_BOARD_DIR}/init/${config_additional_init} ${romfs_gen_root_dir}/init.d/rc.additional_init
+			COMMAND ${CMAKE_COMMAND} -E touch ${config_additional_init}.stamp
+			DEPENDS
+				${PX4_BOARD_DIR}/init/${config_additional_init}
+				romfs_copy.stamp
+			COMMENT "ROMFS: copying ${config_additional_init}"
+		)
+
+		list(APPEND extras_dependencies
+			${config_additional_init}.stamp
+			)
+	else()
+		message(FATAL_ERROR "BOARD_ADDITIONAL_INIT file not found at: ${PX4_BOARD_DIR}/init/${config_additional_init}")
+	endif()
+endif()
+
 
 # board extras
 set(OPTIONAL_BOARD_EXTRAS)
@@ -216,12 +263,33 @@ foreach(board_extra_file ${OPTIONAL_BOARD_EXTRAS})
 		if(CONFIG_SYSTEMCMDS_BL_UPDATE)
 			# generate rc.board_bootloader_upgrade
 			set(BOARD_FIRMWARE_BIN "${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin")
-			configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade @ONLY)
+			message(STATUS "ROMFS:  Adding platforms/nuttx/init/rc.board_bootloader_upgrade -> /etc/init.d/rc.board_bootloader_upgrade")
+
+			# Generate the file using configure_file at configure time to a temporary location
+			set(bootloader_upgrade_tmp ${CMAKE_CURRENT_BINARY_DIR}/rc.board_bootloader_upgrade.tmp)
+			configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${bootloader_upgrade_tmp} @ONLY)
+
+			# Then copy it at build time with proper dependencies
+			add_custom_command(
+				OUTPUT
+					${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade
+					rc.board_bootloader_upgrade.stamp
+				COMMAND ${CMAKE_COMMAND} -E copy_if_different ${bootloader_upgrade_tmp} ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade
+				COMMAND ${CMAKE_COMMAND} -E touch rc.board_bootloader_upgrade.stamp
+				DEPENDS
+					${bootloader_upgrade_tmp}
+					${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in
+					romfs_copy.stamp
+				COMMENT "ROMFS: copying rc.board_bootloader_upgrade"
+			)
+
+			list(APPEND extras_dependencies
+				rc.board_bootloader_upgrade.stamp
+			)
 		else()
 			# remove bootloader from extras
 			list(REMOVE_ITEM OPTIONAL_BOARD_EXTRAS ${board_extra_file})
 		endif()
-
 	endif()
 endforeach()
 

ROMFS/cannode/init.d/rcS

@@ -56,6 +56,17 @@ then
 fi
 unset BOARD_RC_DEFAULTS
 
+#
+# Optional additional init file: rc.additional_init
+#
+set BOARD_RC_ADDITIONAL_INIT ${R}etc/init.d/rc.additional_init
+if [ -f $BOARD_RC_ADDITIONAL_INIT ]
+then
+	echo "Board additional init: ${BOARD_RC_ADDITIONAL_INIT}"
+	. $BOARD_RC_ADDITIONAL_INIT
+fi
+unset BOARD_RC_ADDITIONAL_INIT
+
 #
 # Start system state indicator.
 #

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -27,7 +27,6 @@ param set-default SIH_KDV 0.2
 param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
 param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 
@@ -46,3 +45,22 @@ param set-default PWM_MAIN_FUNC3 203
 param set-default PWM_MAIN_FUNC4 101
 
 param set-default EKF2_GPS_DELAY 0
+
+# Rate controllers
+param set-default FW_RR_P 0.0500
+param set-default FW_RR_I 2.0000
+param set-default FW_RR_D 0.0000
+param set-default FW_RR_FF 0.0000
+param set-default FW_RR_IMAX 1.0000
+
+param set-default FW_PR_P 0.0800
+param set-default FW_PR_I 2.5000
+param set-default FW_PR_D 0.0000
+param set-default FW_PR_FF 0.0000
+param set-default FW_PR_IMAX 1.0000
+
+param set-default FW_YR_P 0.0500
+param set-default FW_YR_I 3.0000
+param set-default FW_YR_D 0.0000
+param set-default FW_YR_FF 0.0000
+param set-default FW_YR_IMAX 1.0000

ROMFS/px4fmu_common/init.d-posix/airframes/10044_sihsim_hex

@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# @name HexarotorX SITL for SIH
+#
+# @type Hexarotor x
+# @class Copter
+#
+# @maintainer Matthias Grob <maetugr@gmail.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=hex}
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 1
+param set-default SENS_EN_MAGSIM 1
+
+param set SIH_VEHICLE_TYPE 4
+
+# Symmetric hexacopter X clockwise motor numbering
+param set-default CA_ROTOR_COUNT 6
+param set-default CA_ROTOR0_PX 0.866
+param set-default CA_ROTOR0_PY 0.5
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY 1
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX -0.866
+param set-default CA_ROTOR2_PY 0.5
+param set-default CA_ROTOR3_PX -0.866
+param set-default CA_ROTOR3_PY -0.5
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_PX 0
+param set-default CA_ROTOR4_PY -1
+param set-default CA_ROTOR5_PX 0.866
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR5_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+
+param set-default EKF2_GPS_DELAY 0

ROMFS/px4fmu_common/init.d-posix/airframes/10045_sihsim_rover_ackermann

@@ -0,0 +1,72 @@
+#!/bin/sh
+# @name Rover Ackermann
+# @type Rover
+# @class Rover
+
+. ${R}etc/init.d/rc.rover_ackermann_defaults
+
+set VEHICLE_TYPE rover_ackermann
+param set-default CA_AIRFRAME 5         # Rover (Ackermann)
+param set-default CA_R_REV 1            # Motor is assumed to be reversible
+param set-default EKF2_MAG_TYPE 1       # Make sure magnetometer is fused even when not driving
+param set-default NAV_ACC_RAD 0.5       # Waypoint acceptance radius
+param set-default EKF2_GBIAS_INIT 0.01
+param set-default EKF2_ANGERR_INIT 0.01
+
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_ackermann}
+
+param set-default SIH_VEHICLE_TYPE 5 # sih as rover ackermann
+
+param set-default PWM_MAIN_FUNC1 201 # Steering
+param set-default PWM_MAIN_FUNC2 101 # Throttle
+param set-default SIH_MASS 20
+param set-default SIH_IXX 0.4333
+param set-default SIH_IYY 1.6833
+param set-default SIH_IZZ 2.0833
+param set-default SIH_IXZ 0
+param set-default SIH_KDV 50
+param set-default SIH_KDW 10
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 1
+param set-default SENS_EN_MAGSIM 1
+
+# Ackermann Parameters
+param set-default RA_WHEEL_BASE 0.321
+param set-default RA_ACC_RAD_GAIN 2
+param set-default RA_ACC_RAD_MAX 3
+param set-default RA_MAX_STR_ANG 0.5236
+param set-default RA_STR_RATE_LIM 360
+
+# Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.01
+param set-default RO_YAW_RATE_P 0.25
+param set-default RO_YAW_RATE_LIM 180
+param set-default RO_YAW_ACCEL_LIM 400
+param set-default RO_YAW_DECEL_LIM 800
+param set-default RO_YAW_RATE_CORR 1
+
+# Attitude Control Parameters
+param set-default RO_YAW_P 5
+
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 3
+param set-default RO_DECEL_LIM 3
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 3.2
+param set-default RO_SPEED_LIM 3
+param set-default RO_SPEED_I 0.001
+param set-default RO_SPEED_P 0.001
+param set-default RO_SPEED_RED 1
+
+# Pure Pursuit parameters
+param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1
+
+# Pure Pursuit parameters
+param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1

ROMFS/px4fmu_common/init.d-posix/airframes/1030_gazebo-classic_plane

@@ -44,8 +44,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam

@@ -46,8 +46,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo-classic_plane_catapult

@@ -46,8 +46,6 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal

@@ -31,8 +31,6 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -31,8 +31,6 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1035_gazebo-classic_techpod

@@ -30,8 +30,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo

@@ -31,8 +31,6 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1037_gazebo-classic_believer

@@ -38,8 +38,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo-classic_glider

@@ -44,8 +44,6 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -35,8 +35,6 @@ param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1039_gazebo-classic_advanced_plane

@@ -35,8 +35,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo-classic_plane_lidar

@@ -46,8 +46,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1060_gazebo-classic_rover

@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name Rover
-#
-
-. ${R}etc/init.d/rc.rover_defaults
-
-param set-default GND_L1_DIST 5
-param set-default GND_L1_PERIOD 10
-param set-default GND_SP_CTRL_MODE 1
-param set-default GND_SPEED_D 0.001
-param set-default GND_SPEED_I 3
-param set-default GND_SPEED_IMAX 0.125
-param set-default GND_SPEED_P 0.25
-param set-default GND_SPEED_THR_SC 1
-param set-default GND_SPEED_TRIM 4
-param set-default GND_THR_CRUISE 0.3
-param set-default GND_THR_MAX 0.5
-param set-default GND_THR_MIN 0
-
-param set-default NAV_ACC_RAD 0.5
-param set-default NAV_LOITER_RAD 2
-
-param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2
-
-param set-default CA_AIRFRAME 5
-
-param set-default CA_R_REV 1
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 201
-param set-default PWM_MAIN_FUNC6 101
-param set-default PWM_MAIN_FUNC7 101

ROMFS/px4fmu_common/init.d-posix/airframes/1061_gazebo-classic_r1_rover

@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Aion Robotics R1 Rover
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 101
-param set-default PWM_MAIN_FUNC6 102
-param set-default PWM_MAIN_FUNC7 102

ROMFS/px4fmu_common/init.d-posix/airframes/17001_flightgear_tf-g1

@@ -43,8 +43,6 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/17002_flightgear_tf-g2

@@ -48,8 +48,6 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna

@@ -53,8 +53,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default COM_PREARM_MODE 2
 
 param set-default CA_ROTOR_COUNT 1

ROMFS/px4fmu_common/init.d-posix/airframes/4004_gz_standard_vtol

@@ -101,6 +101,6 @@ param set-default NAV_ACC_RAD 5
 param set-default NAV_DLL_ACT 2
 
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.3
+param set-default VT_F_TRANS_THR 1
 param set-default VT_TYPE 2
 param set-default FD_ESCS_EN 0

ROMFS/px4fmu_common/init.d-posix/airframes/4008_gz_advanced_plane

@@ -11,8 +11,6 @@ PX4_SIM_MODEL=${PX4_SIM_MODEL:=advanced_plane}
 
 param set-default SIM_GZ_EN 1
 
-param set-default SENS_EN_ARSPDSIM 1
-
 param set-default FW_LND_ANG 8
 
 param set-default FW_PR_FF 0.08
@@ -48,8 +46,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 
 param set-default CA_SV_CS_COUNT 6

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -15,7 +15,6 @@ param set-default NAV_ACC_RAD 0.5
 
 # Differential Parameters
 param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAX_THR_YAW_R 1.5
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
 
@@ -31,14 +30,16 @@ param set-default RO_YAW_RATE_P 0.25
 param set-default RO_YAW_RATE_LIM 180
 param set-default RO_YAW_ACCEL_LIM 120
 param set-default RO_YAW_DECEL_LIM 1000
+param set-default RO_YAW_RATE_CORR 1.43
 
 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5
 
-# Rover Position Control Parameters
+# Rover Velocity Control Parameters
 param set-default RO_SPEED_LIM 2
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_RED 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower

@@ -1,51 +1,68 @@
 #!/bin/sh
-# @name Gazebo lawnmower
+# @name Gazebo - Zero Turn Lawnmower
 # @type Rover
 # @class Rover
 
 . ${R}etc/init.d/rc.rover_differential_defaults
 
 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=lawn}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=lawnmower}
 
 param set-default SIM_GZ_EN 1 # Gazebo bridge
 
+param set-default NAV_ACC_RAD 0.5
+
 # We can arm and drive in manual mode when it slides and GPS check fails:
 param set-default COM_ARM_WO_GPS 1
 
-# Rover parameters
+# Differential Parameters
 param set-default RD_WHEEL_TRACK 0.9
-param set-default RD_YAW_RATE_I 0.1
-param set-default RD_YAW_RATE_P 5
-param set-default RD_MAX_ACCEL 1
-param set-default RD_MAX_JERK 3
-param set-default RD_MAX_SPEED 8
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_MAX_YAW_RATE 30
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
 
+# Rover Control Parameters
+param set-default RO_ACCEL_LIM 1.5
+param set-default RO_DECEL_LIM 5
+param set-default RO_JERK_LIM 15
+param set-default RO_MAX_THR_SPEED 2.7
+
+# Rover Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.2
+param set-default RO_YAW_RATE_P 1.0
+param set-default RO_YAW_RATE_LIM 60
+param set-default RO_YAW_ACCEL_LIM 50
+param set-default RO_YAW_DECEL_LIM 1000
+param set-default RO_YAW_RATE_CORR 1.0
+
+# Rover Attitude Control Parameters
+param set-default RO_YAW_P 5
+
+# Rover Velocity Control Parameters
+param set-default RO_SPEED_LIM 2.1
+param set-default RO_SPEED_I 0.01
+param set-default RO_SPEED_P 0.1
+param set-defatul RO_SPEED_RED 1.0
+
 # Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
 param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1
 
 # Actuator mapping - set SITL motors/servos output parameters:
 
 # "Motors" - motor channels 0 (Right) and 1 (Left) - via Wheels GZ bridge:
 param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-#param set-default SIM_GZ_WH_MIN1 0
-#param set-default SIM_GZ_WH_MAX1 200
-#param set-default SIM_GZ_WH_DIS1 100
-#param set-default SIM_GZ_WH_FAIL1 100
+param set-default SIM_GZ_WH_MIN1 87
+param set-default SIM_GZ_WH_MAX1 113
+param set-default SIM_GZ_WH_DIS1 100
+param set-default SIM_GZ_WH_FAIL1 100
 
 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-#param set-default SIM_GZ_WH_MIN2 0
-#param set-default SIM_GZ_WH_MAX2 200
-#param set-default SIM_GZ_WH_DIS2 100
-#param set-default SIM_GZ_WH_FAIL2 100
+param set-default SIM_GZ_WH_MIN2 87
+param set-default SIM_GZ_WH_MAX2 113
+param set-default SIM_GZ_WH_DIS2 100
+param set-default SIM_GZ_WH_FAIL2 100
 
 param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
 

ROMFS/px4fmu_common/init.d-posix/airframes/4019_gz_x500_gimbal

@@ -19,5 +19,6 @@ param set-default MNT_MAN_PITCH 2
 param set-default MNT_MAN_YAW 3
 
 param set-default MNT_RANGE_ROLL 180
-param set-default MNT_RANGE_PITCH 180
+param set-default MNT_MAX_PITCH 45
+param set-default MNT_MIN_PITCH -135
 param set-default MNT_RANGE_YAW 720

ROMFS/px4fmu_common/init.d-posix/airframes/50000_gz_rover_differential

@@ -0,0 +1,59 @@
+#!/bin/sh
+# @name Generic Differential Rover
+# @type Rover
+# @class Rover
+
+. ${R}etc/init.d/rc.rover_differential_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_differential}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default NAV_ACC_RAD 0.5
+
+# Differential Parameters
+param set-default RD_WHEEL_TRACK 0.6
+param set-default RD_TRANS_DRV_TRN 0.785398
+param set-default RD_TRANS_TRN_DRV 0.174533
+param set-default RD_YAW_STK_GAIN 0.6
+
+# Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.01
+param set-default RO_YAW_RATE_P 0.25
+param set-default RO_YAW_RATE_LIM 250
+param set-default RO_YAW_ACCEL_LIM 400
+param set-default RO_YAW_DECEL_LIM 800
+param set-default RO_YAW_RATE_CORR 1
+param set-default RO_YAW_EXPO 0.85
+param set-default RO_YAW_SUPEXPO 0.3
+
+# Attitude Control Parameters
+param set-default RO_YAW_P 5
+
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 4
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 2
+param set-default RO_SPEED_LIM 1.8
+param set-default RO_SPEED_I 0.01
+param set-default RO_SPEED_P 0.01
+param set-default RO_SPEED_RED 1
+
+# Pure Pursuit parameters
+param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1
+
+# Actuator mapping
+param set-default SIM_GZ_WH_FUNC1 101 # right wheel
+param set-default SIM_GZ_WH_MIN1 80
+param set-default SIM_GZ_WH_MAX1 120
+param set-default SIM_GZ_WH_DIS1 100
+
+param set-default SIM_GZ_WH_FUNC2 102 # left wheel
+param set-default SIM_GZ_WH_MIN2 80
+param set-default SIM_GZ_WH_MAX2 120
+param set-default SIM_GZ_WH_DIS2 100

ROMFS/px4fmu_common/init.d-posix/airframes/51000_gz_rover_ackermann

@@ -1,5 +1,5 @@
 #!/bin/sh
-# @name Rover Ackermann
+# @name Generic Ackermann Rover
 # @type Rover
 # @class Rover
 
@@ -14,30 +14,34 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default NAV_ACC_RAD 0.5
 
 # Ackermann Parameters
-param set-default RA_WHEEL_BASE 0.321
+param set-default RA_WHEEL_BASE 0.5
 param set-default RA_ACC_RAD_GAIN 2
-param set-default RA_ACC_RAD_MAX 3
+param set-default RA_ACC_RAD_MAX 1.5
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_STR_RATE_LIM 360
 
-# Rover Control Parameters
-param set-default RO_ACCEL_LIM 3
-param set-default RO_DECEL_LIM 6
-param set-default RO_JERK_LIM 15
-param set-default RO_MAX_THR_SPEED 3.1
+# Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.01
+param set-default RO_YAW_RATE_P 0.25
+param set-default RO_YAW_RATE_LIM 130
+param set-default RO_YAW_ACCEL_LIM 800
+param set-default RO_YAW_DECEL_LIM 800
+param set-default RO_YAW_RATE_CORR 1
+param set-default RO_YAW_EXPO 0.85
+param set-default RO_YAW_SUPEXPO 0.3
 
-# Rover Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.1
-param set-default RO_YAW_RATE_P 1
-param set-default RO_YAW_RATE_LIM 180
-
-# Rover Attitude Control Parameters
+# Attitude Control Parameters
 param set-default RO_YAW_P 3
 
-# Rover Position Control Parameters
-param set-default RO_SPEED_LIM 3
-param set-default RO_SPEED_I 0.1
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 4
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 3.1
+param set-default RO_SPEED_LIM 2.5
+param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 1
+param set-default RO_SPEED_RED 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1
@@ -46,8 +50,8 @@ param set-default PP_LOOKAHD_MIN 1
 
 # Wheels
 param set-default SIM_GZ_WH_FUNC1 101
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_MIN1 70
+param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100
 
 # Steering

ROMFS/px4fmu_common/init.d-posix/airframes/52000_gz_rover_mecanum

@@ -1,5 +1,5 @@
 #!/bin/sh
-# @name Aion Robotics R1 Rover
+# @name Generic Mecanum Rover
 # @type Rover
 # @class Rover
 
@@ -7,16 +7,15 @@
 
 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
 PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover_mecanum}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_mecanum}
 
 param set-default SIM_GZ_EN 1 # Gazebo bridge
 
 param set-default NAV_ACC_RAD 0.5
 
 # Mecanum Parameters
-param set-default RM_WHEEL_TRACK 0.3
-param set-default RM_MAX_THR_YAW_R 1.2
-param set-default RM_MISS_SPD_GAIN 1
+param set-default RM_WHEEL_TRACK 0.6
+param set-default RM_YAW_STK_GAIN 0.6
 
 # Rover Control Parameters
 param set-default RO_ACCEL_LIM 3
@@ -30,14 +29,22 @@ param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 120
 param set-default RO_YAW_ACCEL_LIM 240
 param set-default RO_YAW_DECEL_LIM 1000
+param set-default RO_YAW_RATE_CORR 1.75
+param set-default RO_YAW_EXPO 0.85
+param set-default RO_YAW_SUPEXPO 0.3
 
 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5
 
-# Rover Position Control Parameters
-param set-default RO_SPEED_LIM 2
-param set-default RO_SPEED_I 0.5
-param set-default RO_SPEED_P 1
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 4
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 3.1
+param set-default RO_SPEED_LIM 2.5
+param set-default RO_SPEED_I 0.01
+param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_RED 0.5
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 0.5
@@ -48,24 +55,24 @@ param set-default PP_LOOKAHD_MIN 1
 param set-default SENS_EN_MAGSIM 1
 
 # Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
+param set-default SIM_GZ_WH_FUNC1 104 # left wheel back
 param set-default SIM_GZ_WH_MIN1 70
 param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100
 
-param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
+param set-default SIM_GZ_WH_FUNC2 103 # right wheel back
 param set-default SIM_GZ_WH_MIN2 70
 param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100
 
-param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
+param set-default SIM_GZ_WH_FUNC3 102 # left wheel front
 param set-default SIM_GZ_WH_MIN3 70
 param set-default SIM_GZ_WH_MAX3 130
 param set-default SIM_GZ_WH_DIS3 100
 
-param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
+param set-default SIM_GZ_WH_FUNC4 101 # right wheel front
 param set-default SIM_GZ_WH_MIN4 70
 param set-default SIM_GZ_WH_MAX4 130
 param set-default SIM_GZ_WH_DIS4 100
 
-param set-default SIM_GZ_WH_REV 10
+param set-default SIM_GZ_WH_REV 0

ROMFS/px4fmu_common/init.d-posix/airframes/60002_gz_uuv_bluerov2_heavy

@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+# @name BlueROV2 Heavy
+#
+# @type UUV
+#
+# @maintainer Pedro Roque <padr@kth.se>
+# @maintainer Nicola De Carli <ndc@kth.se>
+#
+
+# Source PX4 parameters and configuration
+. ${R}/etc/init.d/rc.uuv_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=underwater}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=uuv_bluerov2_heavy}
+
+param set-default SIM_GZ_EN 1
+
+# Set parameters using `param` utility for SITL
+param set-default CA_AIRFRAME 7
+param set-default CA_METHOD 0
+param set-default MAV_TYPE 12
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 1
+param set-default SENS_EN_MAGSIM 1
+param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
+param set-default FD_ESCS_EN 0 # We don't have ESCs - but maybe we need this later?
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 255
+
+param set-default CA_ROTOR0_AX -1
+param set-default CA_ROTOR0_AY 1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX 0.14
+param set-default CA_ROTOR0_PY 0.10
+param set-default CA_ROTOR0_PZ 0.06
+#param set-default CA_ROTOR0_PZ 0.0
+
+param set-default CA_ROTOR1_AX -1
+param set-default CA_ROTOR1_AY -1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX 0.14
+param set-default CA_ROTOR1_PY -0.10
+param set-default CA_ROTOR1_PZ 0.06
+#param set-default CA_ROTOR1_PZ 0.0
+
+param set-default CA_ROTOR2_AX 1
+param set-default CA_ROTOR2_AY 1
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX -0.14
+param set-default CA_ROTOR2_PY 0.10
+param set-default CA_ROTOR2_PZ 0.06
+#param set-default CA_ROTOR2_PZ 0.0
+
+param set-default CA_ROTOR3_AX 1
+param set-default CA_ROTOR3_AY -1
+param set-default CA_ROTOR3_AZ 0
+param set-default CA_ROTOR3_KM 0
+param set-default CA_ROTOR3_PX -0.14
+param set-default CA_ROTOR3_PY -0.10
+param set-default CA_ROTOR3_PZ 0.06
+
+param set-default CA_ROTOR4_AX 0
+param set-default CA_ROTOR4_AY 0
+param set-default CA_ROTOR4_AZ 1
+param set-default CA_ROTOR4_KM 0
+param set-default CA_ROTOR4_PX 0.12
+param set-default CA_ROTOR4_PY 0.22
+param set-default CA_ROTOR4_PZ 0
+
+param set-default CA_ROTOR5_AX 0
+param set-default CA_ROTOR5_AY 0
+param set-default CA_ROTOR5_AZ 1
+param set-default CA_ROTOR5_KM 0
+param set-default CA_ROTOR5_PX 0.12
+param set-default CA_ROTOR5_PY -0.22
+param set-default CA_ROTOR5_PZ 0
+
+param set-default CA_ROTOR6_AX 0
+param set-default CA_ROTOR6_AY 0
+param set-default CA_ROTOR6_AZ 1
+param set-default CA_ROTOR6_KM 0
+param set-default CA_ROTOR6_PX -0.12
+param set-default CA_ROTOR6_PY 0.22
+param set-default CA_ROTOR6_PZ 0
+
+param set-default CA_ROTOR7_AX 0
+param set-default CA_ROTOR7_AY 0
+param set-default CA_ROTOR7_AZ 1
+param set-default CA_ROTOR7_KM 0
+param set-default CA_ROTOR7_PX -0.12
+param set-default CA_ROTOR7_PY -0.22
+param set-default CA_ROTOR7_PZ 0
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+param set-default SIM_GZ_EC_FUNC5 105
+param set-default SIM_GZ_EC_FUNC6 106
+param set-default SIM_GZ_EC_FUNC7 107
+param set-default SIM_GZ_EC_FUNC8 108
+
+param set-default SIM_GZ_EC_MIN1 1100
+param set-default SIM_GZ_EC_MIN2 1100
+param set-default SIM_GZ_EC_MIN3 1100
+param set-default SIM_GZ_EC_MIN4 1100
+param set-default SIM_GZ_EC_MIN5 1100
+param set-default SIM_GZ_EC_MIN6 1100
+param set-default SIM_GZ_EC_MIN7 1100
+param set-default SIM_GZ_EC_MIN8 1100
+
+param set-default SIM_GZ_EC_MAX1 1900
+param set-default SIM_GZ_EC_MAX2 1900
+param set-default SIM_GZ_EC_MAX3 1900
+param set-default SIM_GZ_EC_MAX4 1900
+param set-default SIM_GZ_EC_MAX5 1900
+param set-default SIM_GZ_EC_MAX6 1900
+param set-default SIM_GZ_EC_MAX7 1900
+param set-default SIM_GZ_EC_MAX8 1900

ROMFS/px4fmu_common/init.d-posix/airframes/6011_gazebo-classic_typhoon_h480

@@ -26,7 +26,6 @@ param set-default TRIG_INTERFACE 3
 param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
-param set-default MAV_PROTO_VER 2
 
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 6

ROMFS/px4fmu_common/init.d-posix/airframes/70000_gz_atmos

@@ -0,0 +1,155 @@
+#!/bin/sh
+#
+# @name KTH-ATMOS
+#
+# @type Free-Flyer
+# @class Spacecraft
+#
+# @output Motor1 back left thruster, +x thrust
+# @output Motor2 front left thruster, -x thrust
+# @output Motor3 back right thruster, +x thrust
+# @output Motor4 front right thruster, -x thrust
+# @output Motor5 front left thruster, +y thrust
+# @output Motor6 front right thruster, -y thrust
+# @output Motor7 back left thruster, +y thrust
+# @output Motor8 back right thruster, -y thrust
+#
+# @maintainer discower-io
+# @url https://atmos.discower.io
+#
+
+. ${R}etc/init.d/rc.sc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=atmos}
+
+param set-default SIM_GZ_EN 1
+
+param set-default SENS_EN_MAGSIM 1
+param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
+param set-default FD_ESCS_EN 0
+
+param set-default CA_AIRFRAME 14
+param set-default MAV_TYPE 45
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 0
+
+# Auto to be provided by Custom Airframe
+param set-default CA_METHOD 0
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+param set-default CA_ROTOR0_PX -0.12
+param set-default CA_ROTOR0_PY -0.12
+param set-default CA_ROTOR0_PZ 0.0
+param set-default CA_ROTOR0_CT 1.4
+param set-default CA_ROTOR0_AX 1.0
+param set-default CA_ROTOR0_AY 0.0
+param set-default CA_ROTOR0_AZ 0.0
+
+param set-default CA_ROTOR1_PX 0.12
+param set-default CA_ROTOR1_PY -0.12
+param set-default CA_ROTOR1_PZ 0.0
+param set-default CA_ROTOR1_CT 1.4
+param set-default CA_ROTOR1_AX -1.0
+param set-default CA_ROTOR1_AY 0.0
+param set-default CA_ROTOR1_AZ 0.0
+
+param set-default CA_ROTOR2_PX -0.12
+param set-default CA_ROTOR2_PY 0.12
+param set-default CA_ROTOR2_PZ 0.0
+param set-default CA_ROTOR2_CT 1.4
+param set-default CA_ROTOR2_AX 1.0
+param set-default CA_ROTOR2_AY 0.0
+param set-default CA_ROTOR2_AZ 0.0
+
+param set-default CA_ROTOR3_PX 0.12
+param set-default CA_ROTOR3_PY 0.12
+param set-default CA_ROTOR3_PZ 0.0
+param set-default CA_ROTOR3_CT 1.4
+param set-default CA_ROTOR3_AX -1.0
+param set-default CA_ROTOR3_AY 0.0
+param set-default CA_ROTOR3_AZ 0.0
+
+param set-default CA_ROTOR4_PX 0.12
+param set-default CA_ROTOR4_PY -0.12
+param set-default CA_ROTOR4_PZ 0.0
+param set-default CA_ROTOR4_CT 1.4
+param set-default CA_ROTOR4_AX 0.0
+param set-default CA_ROTOR4_AY 1.0
+param set-default CA_ROTOR4_AZ 0.0
+
+param set-default CA_ROTOR5_PX 0.12
+param set-default CA_ROTOR5_PY 0.12
+param set-default CA_ROTOR5_PZ 0.0
+param set-default CA_ROTOR5_CT 1.4
+param set-default CA_ROTOR5_AX 0.0
+param set-default CA_ROTOR5_AY -1.0
+param set-default CA_ROTOR5_AZ 0.0
+
+param set-default CA_ROTOR6_PX -0.12
+param set-default CA_ROTOR6_PY -0.12
+param set-default CA_ROTOR6_PZ 0.0
+param set-default CA_ROTOR6_CT 1.4
+param set-default CA_ROTOR6_AX 0.0
+param set-default CA_ROTOR6_AY 1.0
+param set-default CA_ROTOR6_AZ 0.0
+
+param set-default CA_ROTOR7_PX -0.12
+param set-default CA_ROTOR7_PY 0.12
+param set-default CA_ROTOR7_PZ 0.0
+param set-default CA_ROTOR7_CT 1.4
+param set-default CA_ROTOR7_AX 0.0
+param set-default CA_ROTOR7_AY -1.0
+param set-default CA_ROTOR7_AZ 0.0
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+param set-default SIM_GZ_EC_FUNC5 105
+param set-default SIM_GZ_EC_FUNC6 106
+param set-default SIM_GZ_EC_FUNC7 107
+param set-default SIM_GZ_EC_FUNC8 108
+
+param set-default SIM_GZ_EC_MIN1 0
+param set-default SIM_GZ_EC_MIN2 0
+param set-default SIM_GZ_EC_MIN3 0
+param set-default SIM_GZ_EC_MIN4 0
+param set-default SIM_GZ_EC_MIN5 0
+param set-default SIM_GZ_EC_MIN6 0
+param set-default SIM_GZ_EC_MIN7 0
+param set-default SIM_GZ_EC_MIN8 0
+
+param set-default SIM_GZ_EC_MAX1 10000
+param set-default SIM_GZ_EC_MAX2 10000
+param set-default SIM_GZ_EC_MAX3 10000
+param set-default SIM_GZ_EC_MAX4 10000
+param set-default SIM_GZ_EC_MAX5 10000
+param set-default SIM_GZ_EC_MAX6 10000
+param set-default SIM_GZ_EC_MAX7 10000
+param set-default SIM_GZ_EC_MAX8 10000
+
+# Controller Tunings
+param set SC_YAWRATE_P 3.335
+param set SC_YAWRATE_I 0.87
+param set SC_YAWRATE_D 0.15
+param set SC_YR_INT_LIM 0.2
+param set SC_YAW_P 3.0
+
+param set SPC_POS_P 0.20
+param set SPC_VEL_P 6.55
+param set SPC_VEL_I 0.0
+param set SPC_VEL_D 0.0
+param set SPC_VEL_MAX 12.0

ROMFS/px4fmu_common/init.d-posix/airframes/70001_gz_atmos_dual

@@ -0,0 +1,167 @@
+#!/bin/sh
+#
+# @name KTH-ATMOS
+#
+# @type Free-Flyer
+# @class Spacecraft
+#
+# @output Motor1 back left thruster, +x thrust
+# @output Motor2 front left thruster, -x thrust
+# @output Motor3 back right thruster, +x thrust
+# @output Motor4 front right thruster, -x thrust
+# @output Motor5 front left thruster, +y thrust
+# @output Motor6 front right thruster, -y thrust
+# @output Motor7 back left thruster, +y thrust
+# @output Motor8 back right thruster, -y thrust
+#
+# @maintainer discower-io
+# @url https://atmos.discower.io
+#
+
+. ${R}etc/init.d/rc.sc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=atmos_dual}
+
+param set-default SIM_GZ_EN 1
+
+param set-default SENS_EN_MAGSIM 1
+param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
+param set-default FD_ESCS_EN 0
+
+param set-default CA_AIRFRAME 14
+param set-default MAV_TYPE 45
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 0
+
+# Auto to be provided by Custom Airframe
+param set-default CA_METHOD 0
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+param set-default CA_ROTOR0_PX -0.12
+param set-default CA_ROTOR0_PY -0.12
+param set-default CA_ROTOR0_PZ 0.0
+param set-default CA_ROTOR0_CT 1.4
+param set-default CA_ROTOR0_AX 1.0
+param set-default CA_ROTOR0_AY 0.0
+param set-default CA_ROTOR0_AZ 0.0
+
+param set-default CA_ROTOR1_PX 0.12
+param set-default CA_ROTOR1_PY -0.12
+param set-default CA_ROTOR1_PZ 0.0
+param set-default CA_ROTOR1_CT 1.4
+param set-default CA_ROTOR1_AX -1.0
+param set-default CA_ROTOR1_AY 0.0
+param set-default CA_ROTOR1_AZ 0.0
+
+param set-default CA_ROTOR2_PX -0.12
+param set-default CA_ROTOR2_PY 0.12
+param set-default CA_ROTOR2_PZ 0.0
+param set-default CA_ROTOR2_CT 1.4
+param set-default CA_ROTOR2_AX 1.0
+param set-default CA_ROTOR2_AY 0.0
+param set-default CA_ROTOR2_AZ 0.0
+
+param set-default CA_ROTOR3_PX 0.12
+param set-default CA_ROTOR3_PY 0.12
+param set-default CA_ROTOR3_PZ 0.0
+param set-default CA_ROTOR3_CT 1.4
+param set-default CA_ROTOR3_AX -1.0
+param set-default CA_ROTOR3_AY 0.0
+param set-default CA_ROTOR3_AZ 0.0
+
+param set-default CA_ROTOR4_PX 0.12
+param set-default CA_ROTOR4_PY -0.12
+param set-default CA_ROTOR4_PZ 0.0
+param set-default CA_ROTOR4_CT 1.4
+param set-default CA_ROTOR4_AX 0.0
+param set-default CA_ROTOR4_AY 1.0
+param set-default CA_ROTOR4_AZ 0.0
+
+param set-default CA_ROTOR5_PX 0.12
+param set-default CA_ROTOR5_PY 0.12
+param set-default CA_ROTOR5_PZ 0.0
+param set-default CA_ROTOR5_CT 1.4
+param set-default CA_ROTOR5_AX 0.0
+param set-default CA_ROTOR5_AY -1.0
+param set-default CA_ROTOR5_AZ 0.0
+
+param set-default CA_ROTOR6_PX -0.12
+param set-default CA_ROTOR6_PY -0.12
+param set-default CA_ROTOR6_PZ 0.0
+param set-default CA_ROTOR6_CT 1.4
+param set-default CA_ROTOR6_AX 0.0
+param set-default CA_ROTOR6_AY 1.0
+param set-default CA_ROTOR6_AZ 0.0
+
+param set-default CA_ROTOR7_PX -0.12
+param set-default CA_ROTOR7_PY 0.12
+param set-default CA_ROTOR7_PZ 0.0
+param set-default CA_ROTOR7_CT 1.4
+param set-default CA_ROTOR7_AX 0.0
+param set-default CA_ROTOR7_AY -1.0
+param set-default CA_ROTOR7_AZ 0.0
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+param set-default SIM_GZ_EC_FUNC5 105
+param set-default SIM_GZ_EC_FUNC6 106
+param set-default SIM_GZ_EC_FUNC7 107
+param set-default SIM_GZ_EC_FUNC8 108
+param set-default SIM_GZ_EC_FUNC9 301
+param set-default SIM_GZ_EC_FUNC10 302
+param set-default SIM_GZ_EC_FUNC11 303
+param set-default SIM_GZ_EC_FUNC12 304
+
+param set-default SIM_GZ_EC_MIN1 0
+param set-default SIM_GZ_EC_MIN2 0
+param set-default SIM_GZ_EC_MIN3 0
+param set-default SIM_GZ_EC_MIN4 0
+param set-default SIM_GZ_EC_MIN5 0
+param set-default SIM_GZ_EC_MIN6 0
+param set-default SIM_GZ_EC_MIN7 0
+param set-default SIM_GZ_EC_MIN8 0
+param set-default SIM_GZ_EC_MIN9 1100
+param set-default SIM_GZ_EC_MIN10 1100
+param set-default SIM_GZ_EC_MIN11 1100
+param set-default SIM_GZ_EC_MIN12 1100
+
+param set-default SIM_GZ_EC_MAX1 10000
+param set-default SIM_GZ_EC_MAX2 10000
+param set-default SIM_GZ_EC_MAX3 10000
+param set-default SIM_GZ_EC_MAX4 10000
+param set-default SIM_GZ_EC_MAX5 10000
+param set-default SIM_GZ_EC_MAX6 10000
+param set-default SIM_GZ_EC_MAX7 10000
+param set-default SIM_GZ_EC_MAX8 10000
+param set-default SIM_GZ_EC_MAX9 1900
+param set-default SIM_GZ_EC_MAX10 1900
+param set-default SIM_GZ_EC_MAX11 1900
+param set-default SIM_GZ_EC_MAX12 1900
+
+# Controller Tunings
+param set SC_YAWRATE_P 3.335
+param set SC_YAWRATE_I 0.87
+param set SC_YAWRATE_D 0.15
+param set SC_YR_INT_LIM 0.2
+param set SC_YAW_P 3.0
+
+param set SPC_POS_P 0.20
+param set SPC_VEL_P 6.55
+param set SPC_VEL_I 0.0
+param set SPC_VEL_D 0.0
+param set SPC_VEL_MAX 12.0

ROMFS/px4fmu_common/init.d-posix/airframes/71001_gazebo-classic_spacecraft_dart

@@ -1,155 +0,0 @@
-#!/bin/sh
-#
-# @name 6DoF Spacecraft Model
-#
-# @type Freeflyer with 8 thrusters
-#
-# @maintainer Pedro Roque <padr@kth.se>
-#
-
-. ${R}etc/init.d/rc.sc_defaults
-
-param set-default CA_AIRFRAME 15
-param set-default MAV_TYPE 99
-
-param set-default CA_THRUSTER_CNT 12
-param set-default CA_R_REV 0
-
-# param set-default FW_ARSP_MODE 1
-
-# Auto to be provided by Custom Airframe
-param set-default CA_METHOD 0
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
-
-# Set proper failsafes
-param set-default COM_ACT_FAIL_ACT 0
-param set-default COM_LOW_BAT_ACT 0
-param set-default NAV_DLL_ACT 0
-param set-default GF_ACTION 1
-param set-default NAV_RCL_ACT 1
-param set-default COM_POSCTL_NAVL 2
-
-# Set thrusters
-param set-default CA_THRUSTER0_PX -0.50
-param set-default CA_THRUSTER0_PY 0.50
-param set-default CA_THRUSTER0_PZ 0.0
-param set-default CA_THRUSTER0_CT 0.237
-param set-default CA_THRUSTER0_AX 0.0
-param set-default CA_THRUSTER0_AY -1.0
-param set-default CA_THRUSTER0_AZ 0.0
-
-param set-default CA_THRUSTER1_PX 0.50
-param set-default CA_THRUSTER1_PY 0.50
-param set-default CA_THRUSTER1_PZ 0.0
-param set-default CA_THRUSTER1_CT 0.237
-param set-default CA_THRUSTER1_AX 0.0
-param set-default CA_THRUSTER1_AY -1.0
-param set-default CA_THRUSTER1_AZ 0.0
-
-param set-default CA_THRUSTER2_PX 0.50
-param set-default CA_THRUSTER2_PY -0.50
-param set-default CA_THRUSTER2_PZ 0.0
-param set-default CA_THRUSTER2_CT 0.237
-param set-default CA_THRUSTER2_AX 0.0
-param set-default CA_THRUSTER2_AY 1.0
-param set-default CA_THRUSTER2_AZ 0.0
-
-param set-default CA_THRUSTER3_PX -0.50
-param set-default CA_THRUSTER3_PY -0.50
-param set-default CA_THRUSTER3_PZ 0.0
-param set-default CA_THRUSTER3_CT 0.237
-param set-default CA_THRUSTER3_AX 0.0
-param set-default CA_THRUSTER3_AY 1.0
-param set-default CA_THRUSTER3_AZ 0.0
-
-param set-default CA_THRUSTER4_PX -0.50
-param set-default CA_THRUSTER4_PY 0.0
-param set-default CA_THRUSTER4_PZ -0.50
-param set-default CA_THRUSTER4_CT 0.237
-param set-default CA_THRUSTER4_AX 1.0
-param set-default CA_THRUSTER4_AY 0.0
-param set-default CA_THRUSTER4_AZ 0.0
-
-param set-default CA_THRUSTER5_PX 0.50
-param set-default CA_THRUSTER5_PY 0.0
-param set-default CA_THRUSTER5_PZ -0.50
-param set-default CA_THRUSTER5_CT 0.237
-param set-default CA_THRUSTER5_AX -1.0
-param set-default CA_THRUSTER5_AY 0.0
-param set-default CA_THRUSTER5_AZ 0.0
-
-param set-default CA_THRUSTER6_PX 0.50
-param set-default CA_THRUSTER6_PY 0.0
-param set-default CA_THRUSTER6_PZ 0.50
-param set-default CA_THRUSTER6_CT 0.237
-param set-default CA_THRUSTER6_AX -1.0
-param set-default CA_THRUSTER6_AY 0.0
-param set-default CA_THRUSTER6_AZ 0.0
-
-param set-default CA_THRUSTER7_PX -0.50
-param set-default CA_THRUSTER7_PY 0.0
-param set-default CA_THRUSTER7_PZ 0.50
-param set-default CA_THRUSTER7_CT 0.237
-param set-default CA_THRUSTER7_AX 1.0
-param set-default CA_THRUSTER7_AY 0.0
-param set-default CA_THRUSTER7_AZ 0.0
-
-param set-default CA_THRUSTER8_PX 0.0
-param set-default CA_THRUSTER8_PY -0.50
-param set-default CA_THRUSTER8_PZ -0.50
-param set-default CA_THRUSTER8_CT 0.237
-param set-default CA_THRUSTER8_AX 0.0
-param set-default CA_THRUSTER8_AY 0.0
-param set-default CA_THRUSTER8_AZ 1.0
-
-param set-default CA_THRUSTER9_PX 0.0
-param set-default CA_THRUSTER9_PY 0.50
-param set-default CA_THRUSTER9_PZ -0.50
-param set-default CA_THRUSTER9_CT 0.237
-param set-default CA_THRUSTER9_AX 0.0
-param set-default CA_THRUSTER9_AY 0.0
-param set-default CA_THRUSTER9_AZ 1.0
-
-param set-default CA_THRUSTER10_PX 0.0
-param set-default CA_THRUSTER10_PY 0.50
-param set-default CA_THRUSTER10_PZ 0.50
-param set-default CA_THRUSTER10_CT 0.237
-param set-default CA_THRUSTER10_AX 0.0
-param set-default CA_THRUSTER10_AY 0.0
-param set-default CA_THRUSTER10_AZ -1.0
-
-param set-default CA_THRUSTER11_PX 0.0
-param set-default CA_THRUSTER11_PY -0.50
-param set-default CA_THRUSTER11_PZ 0.50
-param set-default CA_THRUSTER11_CT 0.237
-param set-default CA_THRUSTER11_AX 0.0
-param set-default CA_THRUSTER11_AY 0.0
-param set-default CA_THRUSTER11_AZ -1.0
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-param set-default PWM_MAIN_FUNC9 109
-param set-default PWM_MAIN_FUNC10 110
-param set-default PWM_MAIN_FUNC11 111
-param set-default PWM_MAIN_FUNC12 112
-
-# PWM Simulation
-param set PWM_SIM_PWM_MAX 10000
-param set PWM_SIM_PWM_MIN 0
-
-# Controller Tunings
-param set-default SC_ROLLRATE_P 0.14
-param set-default SC_PITCHRATE_P 0.14
-param set-default SC_ROLLRATE_I 0.3
-param set-default SC_PITCHRATE_I 0.3
-param set-default SC_ROLLRATE_D 0.004
-param set-default SC_PITCHRATE_D 0.004

ROMFS/px4fmu_common/init.d-posix/airframes/71002_gz_spacecraft_2d

@@ -1,147 +0,0 @@
-#!/bin/sh
-#
-# @name 3DoF Spacecraft Model
-#
-# @type 2D Freeflyer with 8 thrusters - Planar motion
-#
-# @maintainer Pedro Roque <padr@kth.se>
-#
-
-. ${R}etc/init.d/rc.sc_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=spacecraft_2d}
-
-param set-default SIM_GZ_EN 1
-
-param set-default SENS_EN_MAGSIM 1
-param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
-param set-default FD_ESCS_EN 0 # We don't have ESCs - but maybe we need this later?
-
-param set-default CA_AIRFRAME 14
-param set-default MAV_TYPE 99
-
-param set-default CA_THRUSTER_CNT 8
-param set-default CA_R_REV 0
-
-# param set-default FW_ARSP_MODE 1
-
-# Auto to be provided by Custom Airframe
-param set-default CA_METHOD 0  # 0 is PseudoInverse, 3 is Metric
-
-# Set proper failsafes
-param set-default COM_ACT_FAIL_ACT 0
-param set-default COM_LOW_BAT_ACT 0
-param set-default NAV_DLL_ACT 0
-param set-default GF_ACTION 1
-param set-default NAV_RCL_ACT 1
-param set-default COM_POSCTL_NAVL 2
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
-
-param set-default CA_THRUSTER0_PX -0.12
-param set-default CA_THRUSTER0_PY -0.12
-param set-default CA_THRUSTER0_PZ 0.0
-param set-default CA_THRUSTER0_CT 1.4
-param set-default CA_THRUSTER0_AX 1.0
-param set-default CA_THRUSTER0_AY 0.0
-param set-default CA_THRUSTER0_AZ 0.0
-
-param set-default CA_THRUSTER1_PX 0.12
-param set-default CA_THRUSTER1_PY -0.12
-param set-default CA_THRUSTER1_PZ 0.0
-param set-default CA_THRUSTER1_CT 1.4
-param set-default CA_THRUSTER1_AX -1.0
-param set-default CA_THRUSTER1_AY 0.0
-param set-default CA_THRUSTER1_AZ 0.0
-
-param set-default CA_THRUSTER2_PX -0.12
-param set-default CA_THRUSTER2_PY 0.12
-param set-default CA_THRUSTER2_PZ 0.0
-param set-default CA_THRUSTER2_CT 1.4
-param set-default CA_THRUSTER2_AX 1.0
-param set-default CA_THRUSTER2_AY 0.0
-param set-default CA_THRUSTER2_AZ 0.0
-
-param set-default CA_THRUSTER3_PX 0.12
-param set-default CA_THRUSTER3_PY 0.12
-param set-default CA_THRUSTER3_PZ 0.0
-param set-default CA_THRUSTER3_CT 1.4
-param set-default CA_THRUSTER3_AX -1.0
-param set-default CA_THRUSTER3_AY 0.0
-param set-default CA_THRUSTER3_AZ 0.0
-
-param set-default CA_THRUSTER4_PX 0.12
-param set-default CA_THRUSTER4_PY -0.12
-param set-default CA_THRUSTER4_PZ 0.0
-param set-default CA_THRUSTER4_CT 1.4
-param set-default CA_THRUSTER4_AX 0.0
-param set-default CA_THRUSTER4_AY 1.0
-param set-default CA_THRUSTER4_AZ 0.0
-
-param set-default CA_THRUSTER5_PX 0.12
-param set-default CA_THRUSTER5_PY 0.12
-param set-default CA_THRUSTER5_PZ 0.0
-param set-default CA_THRUSTER5_CT 1.4
-param set-default CA_THRUSTER5_AX 0.0
-param set-default CA_THRUSTER5_AY -1.0
-param set-default CA_THRUSTER5_AZ 0.0
-
-param set-default CA_THRUSTER6_PX -0.12
-param set-default CA_THRUSTER6_PY -0.12
-param set-default CA_THRUSTER6_PZ 0.0
-param set-default CA_THRUSTER6_CT 1.4
-param set-default CA_THRUSTER6_AX 0.0
-param set-default CA_THRUSTER6_AY 1.0
-param set-default CA_THRUSTER6_AZ 0.0
-
-param set-default CA_THRUSTER7_PX -0.12
-param set-default CA_THRUSTER7_PY 0.12
-param set-default CA_THRUSTER7_PZ 0.0
-param set-default CA_THRUSTER7_CT 1.4
-param set-default CA_THRUSTER7_AX 0.0
-param set-default CA_THRUSTER7_AY -1.0
-param set-default CA_THRUSTER7_AZ 0.0
-
-param set-default SIM_GZ_TH_FUNC1 101
-param set-default SIM_GZ_TH_FUNC2 102
-param set-default SIM_GZ_TH_FUNC3 103
-param set-default SIM_GZ_TH_FUNC4 104
-param set-default SIM_GZ_TH_FUNC5 105
-param set-default SIM_GZ_TH_FUNC6 106
-param set-default SIM_GZ_TH_FUNC7 107
-param set-default SIM_GZ_TH_FUNC8 108
-
-param set-default SIM_GZ_TH_MIN1 0
-param set-default SIM_GZ_TH_MIN2 0
-param set-default SIM_GZ_TH_MIN3 0
-param set-default SIM_GZ_TH_MIN4 0
-param set-default SIM_GZ_TH_MIN5 0
-param set-default SIM_GZ_TH_MIN6 0
-param set-default SIM_GZ_TH_MIN7 0
-param set-default SIM_GZ_TH_MIN8 0
-
-param set-default SIM_GZ_TH_MAX1 10000
-param set-default SIM_GZ_TH_MAX2 10000
-param set-default SIM_GZ_TH_MAX3 10000
-param set-default SIM_GZ_TH_MAX4 10000
-param set-default SIM_GZ_TH_MAX5 10000
-param set-default SIM_GZ_TH_MAX6 10000
-param set-default SIM_GZ_TH_MAX7 10000
-param set-default SIM_GZ_TH_MAX8 10000
-
-# Controller Tunings
-param set SC_YAWRATE_P 3.335
-param set SC_YAWRATE_I 0.87
-param set SC_YAWRATE_D 0.15
-param set SC_YR_INT_LIM 0.2
-param set SC_YAW_P 3.0
-
-param set SPC_POS_P 0.20
-param set SPC_VEL_P 6.55
-param set SPC_VEL_I 0.0
-param set SPC_VEL_D 0.0
-param set SPC_VEL_MAX 12.0

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -62,8 +62,6 @@ px4_add_romfs_files(
 	1043_gazebo-classic_standard_vtol_drop
 	1044_gazebo-classic_plane_lidar
 	1045_gazebo-classic_quadtailsitter
-	1060_gazebo-classic_rover
-	1061_gazebo-classic_r1_rover
 	1062_flightgear_tf-r1
 	1070_gazebo-classic_boat
 
@@ -82,10 +80,8 @@ px4_add_romfs_files(
 	4009_gz_r1_rover
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
-	4012_gz_rover_ackermann
 	4013_gz_x500_lidar_2d
 	4014_gz_x500_mono_cam_down
-	4015_gz_r1_rover_mecanum
 	4016_gz_x500_lidar_down
 	4017_gz_x500_lidar_front
 	4018_gz_quadtailsitter
@@ -109,12 +105,20 @@ px4_add_romfs_files(
 	10041_sihsim_airplane
 	10042_sihsim_xvert
 	10043_sihsim_standard_vtol
+	10044_sihsim_hex
+	10045_sihsim_rover_ackermann
 
 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2
 
-	71001_gazebo-classic_spacecraft_dart
-	71002_gz_spacecraft_2d
+	50000_gz_rover_differential
+	51000_gz_rover_ackermann
+	52000_gz_rover_mecanum
+
+	60002_gz_uuv_bluerov2_heavy
+
+	70000_gz_atmos
+	70001_gz_atmos_dual
 
 	# [22000, 22999] Reserve for custom models
 )

ROMFS/px4fmu_common/init.d-posix/px4-rc.gzsim

@@ -110,25 +110,36 @@ if [ -n "${PX4_SIM_MODEL#*gz_}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
 	MODEL_NAME="${PX4_SIM_MODEL#*gz_}"
 	MODEL_NAME_INSTANCE="${MODEL_NAME}_${px4_instance}"
 
-	POSE_ARG=""
-	if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
-		pos_x=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $1}')
-		pos_y=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $2}')
-		pos_z=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $3}')
-		pos_x=${pos_x:-0}
-		pos_y=${pos_y:-0}
-		pos_z=${pos_z:-0}
+	sdf_pose_str=""
 
-		POSE_ARG=", pose: { position: { x: ${pos_x}, y: ${pos_y}, z: ${pos_z} } }"
-		echo "INFO  [init] Spawning model at position: ${pos_x} ${pos_y} ${pos_z}"
+	if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
+		pose_x=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $1}')
+		pose_y=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $2}')
+		pose_z=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $3}')
+		pose_roll=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $4}')
+		pose_pitch=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $5}')
+		pose_yaw=$(echo "${PX4_GZ_MODEL_POSE}" | awk -F',' '{print $6}')
+
+		pose_x=${pose_x:-0}
+		pose_y=${pose_y:-0}
+		pose_z=${pose_z:-0}
+		pose_roll=${pose_roll:-0}
+		pose_pitch=${pose_pitch:-0}
+		pose_yaw=${pose_yaw:-0}
+
+		sdf_pose_str="<pose> ${pose_x} ${pose_y} ${pose_z} ${pose_roll} ${pose_pitch} ${pose_yaw} </pose>"
+		echo "INFO  [init] Gazebo model pose: ${pose_x} ${pose_y} ${pose_z} ${pose_roll} ${pose_pitch} ${pose_yaw}"
 	fi
 
-	echo "INFO  [init] Spawning model"
+	echo "INFO  [init] Spawning Gazebo model"
+
+	# include the actual SDF in this one, containing the pose if given
+	sdf_str="<sdf version=\"1.6\"> <include> <uri>file://${PX4_GZ_MODELS}/${MODEL_NAME}/model.sdf</uri> ${sdf_pose_str} </include> </sdf>"
 
 	# Spawn model
 	${gz_command} service -s "/world/${PX4_GZ_WORLD}/create" --reqtype gz.msgs.EntityFactory \
 			--reptype gz.msgs.Boolean --timeout 5000 \
-			--req "sdf_filename: \"${PX4_GZ_MODELS}/${MODEL_NAME}/model.sdf\", name: \"${MODEL_NAME_INSTANCE}\", allow_renaming: false${POSE_ARG}" > /dev/null 2>&1
+			--req "name: \"${MODEL_NAME_INSTANCE}\", allow_renaming: false, sdf: '${sdf_str}'" > /dev/null 2>&1
 
 	# Wait for model to spawn
 	sleep 1
@@ -148,24 +159,19 @@ if [ -n "${PX4_SIM_MODEL#*gz_}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
 	fi
 
 	# Set up camera to follow the model if requested
-	if [ -n "${PX4_GZ_FOLLOW}" ]; then
+	if [ -z "${PX4_GZ_NO_FOLLOW}" ]; then
 
 		echo "INFO  [init] Setting camera to follow ${MODEL_NAME_INSTANCE}"
 
-		# Set camera to follow the model
-		${gz_command} service -s "/gui/follow" --reqtype gz.msgs.StringMsg \
-				--reptype gz.msgs.Boolean --timeout 5000 \
-				--req "data: \"${MODEL_NAME_INSTANCE}\"" > /dev/null 2>&1
-
 		# Set default camera offset if not specified
 		follow_x=${PX4_GZ_FOLLOW_OFFSET_X:--2.0}
 		follow_y=${PX4_GZ_FOLLOW_OFFSET_Y:--2.0}
 		follow_z=${PX4_GZ_FOLLOW_OFFSET_Z:-2.0}
 
 		# Set camera offset
-		${gz_command} service -s "/gui/follow/offset" --reqtype gz.msgs.Vector3d \
-				--reptype gz.msgs.Boolean --timeout 5000 \
-				--req "x: ${follow_x}, y: ${follow_y}, z: ${follow_z}" > /dev/null 2>&1
+		${gz_command} topic -t /gui/track -m gz.msgs.CameraTrack \
+				-p "track_mode: FOLLOW, follow_target: {name: '${MODEL_NAME_INSTANCE}'},\
+				 follow_offset: {x: ${follow_x}, y: ${follow_y}, z: ${follow_z}}, follow_pgain: 1.0, track_pgain: 1.0"
 
 		echo "INFO  [init] Camera follow offset set to ${follow_x}, ${follow_y}, ${follow_z}"
 	fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -126,15 +126,6 @@ then
 	set AUTOCNF yes
 fi
 
-# Allow overriding parameters via env variables: export PX4_PARAM_{name}={value}
-env | while IFS='=' read -r line; do
-  value=${line#*=}
-  name=${line%%=*}
-  case $name in
-    "PX4_PARAM_"*) param set "${name#PX4_PARAM_}" "$value" ;;
-  esac
-done
-
 # multi-instance setup
 # shellcheck disable=SC2154
 param set MAV_SYS_ID $((px4_instance+1))
@@ -173,7 +164,6 @@ param set-default COM_RC_IN_MODE 1
 param set-default EKF2_REQ_GPS_H 0.5
 
 param set-default IMU_GYRO_FFT_EN 1
-param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets
 
 param set-default -s MC_AT_EN 1
 
@@ -190,6 +180,9 @@ param set-default SYS_FAILURE_EN 1
 # does not go below 50% by default, but failure injection can trigger failsafes.
 param set-default COM_LOW_BAT_ACT 3
 
+# set default IP to localhost
+param set-default UXRCE_DDS_AG_IP 2130706433  # 127.0.0.1
+
 
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
@@ -236,6 +229,15 @@ then
 	exit 1
 fi
 
+# Allow overriding parameters via env variables: export PX4_PARAM_{name}={value}
+env | while IFS='=' read -r line; do
+  value=${line#*=}
+  name=${line%%=*}
+  case $name in
+    "PX4_PARAM_"*) param set "${name#PX4_PARAM_}" "$value" ;;
+  esac
+done
+
 dataman start
 
 # only start the simulator if not in replay mode, as both control the lockstep time
@@ -295,10 +297,15 @@ then
 	# for multi intances setup, add namespace prefix
 	uxrce_dds_ns="-n px4_$px4_instance"
 fi
-if [ -n "$PX4_UXRCE_DDS_NS" ]
-then
-	# Override namespace if environment variable is defined
-	uxrce_dds_ns="-n $PX4_UXRCE_DDS_NS"
+if [ "${PX4_UXRCE_DDS_NS+x}" ]; then
+	# Override, as variable is set (empty or not)
+	if [ -n "$PX4_UXRCE_DDS_NS" ]; then
+		# Override namespace if environment variable is non-empty
+		uxrce_dds_ns="-n $PX4_UXRCE_DDS_NS"
+	else
+		# Clear namespace if variable is empty
+		uxrce_dds_ns=""
+	fi
 fi
 if [ -n "$ROS_DOMAIN_ID" ]
 then
@@ -314,7 +321,12 @@ then
 	uxrce_dds_port="$PX4_UXRCE_DDS_PORT"
 fi
 
-uxrce_dds_client start -t udp -h 127.0.0.1 -p $uxrce_dds_port $uxrce_dds_ns
+uxrce_dds_client start -t udp -p $uxrce_dds_port $uxrce_dds_ns
+
+if param greater -s ZENOH_ENABLE 0
+then
+	zenoh start
+fi
 
 if param greater -s MNT_MODE_IN -1
 then
@@ -337,11 +349,7 @@ then
 	gyro_calibration start
 fi
 
-# Payload deliverer module if gripper is enabled
-if param compare -s PD_GRIPPER_EN 1
-then
-	payload_deliverer start
-fi
+payload_deliverer start
 
 if param compare -s ICE_EN 1
 then

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -69,15 +69,6 @@ if(CONFIG_MODULES_MC_RATE_CONTROL)
 	)
 endif()
 
-if(CONFIG_MODULES_ROVER_POS_CONTROL)
-	px4_add_romfs_files(
-		rc.rover_apps
-		rc.rover_defaults
-
-		rc.boat_defaults # hack
-	)
-endif()
-
 if(CONFIG_MODULES_ROVER_DIFFERENTIAL)
 	px4_add_romfs_files(
 		rc.rover_differential_apps
@@ -132,3 +123,9 @@ if(CONFIG_MODULES_TEMPERATURE_COMPENSATION)
 		rc.thermal_cal
 	)
 endif()
+
+if(CONFIG_DRIVERS_VTXTABLE)
+	px4_add_romfs_files(
+		rc.vtxtable
+	)
+endif()

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -14,7 +14,6 @@
 
 param set UAVCAN_ENABLE 0
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d/airframes/1104_standard_ackermann_sih.hil

@@ -0,0 +1,65 @@
+#!/bin/sh
+# @name SIH Rover Ackermann
+# @type Rover
+# @class Rover
+
+. ${R}etc/init.d/rc.rover_ackermann_defaults
+
+set VEHICLE_TYPE rover_ackermann
+param set-default CA_AIRFRAME 5         # Rover (Ackermann)
+param set-default CA_R_REV 1            # Motor is assumed to be reversible
+param set-default EKF2_MAG_TYPE 1       # Make sure magnetometer is fused even when not driving
+param set-default NAV_ACC_RAD 0.5       # Waypoint acceptance radius
+param set-default EKF2_GBIAS_INIT 0.01
+param set-default EKF2_ANGERR_INIT 0.01
+
+param set-default SIH_VEHICLE_TYPE 5 # sih as rover ackermann
+param set-default SYS_HITL 2 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
+
+param set-default HIL_ACT_FUNC1 201 # Steering
+param set-default HIL_ACT_FUNC2 101 # Throttle
+param set-default SIH_MASS 20
+param set-default SIH_IXX 0.4333
+param set-default SIH_IYY 1.6833
+param set-default SIH_IZZ 2.0833
+param set-default SIH_IXZ 0
+param set-default SIH_KDV 50
+param set-default SIH_KDW 10
+
+# Ackermann Parameters
+param set-default RA_WHEEL_BASE 0.321
+param set-default RA_ACC_RAD_GAIN 2
+param set-default RA_ACC_RAD_MAX 3
+param set-default RA_MAX_STR_ANG 0.5236
+param set-default RA_STR_RATE_LIM 360
+
+# Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.01
+param set-default RO_YAW_RATE_P 0.25
+param set-default RO_YAW_RATE_LIM 180
+param set-default RO_YAW_ACCEL_LIM 400
+param set-default RO_YAW_DECEL_LIM 800
+param set-default RO_YAW_RATE_CORR 1
+
+# Attitude Control Parameters
+param set-default RO_YAW_P 5
+
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 3
+param set-default RO_DECEL_LIM 3
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 3.2
+param set-default RO_SPEED_LIM 3
+param set-default RO_SPEED_I 0.001
+param set-default RO_SPEED_P 0.001
+param set-default RO_SPEED_RED 1
+
+# Pure Pursuit parameters
+param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1
+
+# Pure Pursuit parameters
+param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1

ROMFS/px4fmu_common/init.d/airframes/17002_TF-AutoG2

@@ -18,6 +18,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #
 
 . ${R}etc/init.d/rc.fw_defaults
@@ -40,8 +42,6 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d/airframes/17003_TF-G2

@@ -16,6 +16,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #
 
 . ${R}etc/init.d/rc.fw_defaults
@@ -37,8 +39,6 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d/airframes/2100_standard_plane

@@ -10,7 +10,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 param set-default CA_SV_CS_COUNT 4

ROMFS/px4fmu_common/init.d/airframes/2106_albatross

@@ -32,7 +32,6 @@ param set-default FW_WR_IMAX 0.8
 param set-default FW_WR_P 1
 param set-default FW_W_RMAX 0
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 7
 param set-default CA_SV_CS0_TRQ_R -0.5

ROMFS/px4fmu_common/init.d/airframes/3000_generic_wing

@@ -10,8 +10,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_SV_CS_COUNT 2

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -7,6 +7,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #
 
 . ${R}etc/init.d/rc.mc_defaults
@@ -75,9 +77,6 @@ param set-default NAV_ACC_RAD 2
 param set-default RTL_DESCEND_ALT 5
 param set-default RTL_RETURN_ALT 5
 
-# Logging Parameters
-param set-default SDLOG_PROFILE 131
-
 # Sensors Parameters
 param set-default SENS_CM8JL65_CFG 104
 param set-default SENS_FLOW_MAXHGT 25

ROMFS/px4fmu_common/init.d/airframes/4017_nxp_hovergames

@@ -7,6 +7,10 @@
 #
 # @board px4_fmu-v2 exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6s exclude
+# @board ark_fmu-v6x exclude
+# @board auterion_fmu-v6x exclude
+# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 #
 # @maintainer Iain Galloway <iain.galloway@nxp.com>

ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5

@@ -7,6 +7,7 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 #
 
@@ -77,9 +78,6 @@ param set-default NAV_ACC_RAD 2
 param set-default RTL_DESCEND_ALT 5
 param set-default RTL_RETURN_ALT 5
 
-# Logging Parameters
-param set-default SDLOG_PROFILE 131
-
 # Sensors Parameters
 param set-default SENS_CM8JL65_CFG 202
 param set-default SENS_FLOW_MAXHGT 25