fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity

boards: add support for Gear Up AirBrainH743

Browse Source
This commit is contained in:
Julian Oes 2025-12-29 17:15:20 +13:00
parent 14864814ef
commit ea2ca45cf9
27 changed files with 2533 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
boards/gearup/airbrainh743/bootloader.px4board Normal file
View File

@ -0,0 +1,3 @@
CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
CONFIG_BOARD_ARCHITECTURE="cortex-m7"
CONFIG_BOARD_ROMFSROOT=""

85
boards/gearup/airbrainh743/default.px4board Normal file
View File

@ -0,0 +1,85 @@
CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
CONFIG_BOARD_ARCHITECTURE="cortex-m7"
CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS6"
CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS3"
CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS2"
CONFIG_BOARD_SERIAL_RC="/dev/ttyS1"
CONFIG_DRIVERS_ADC_BOARD_ADC=y
CONFIG_DRIVERS_BAROMETER_DPS310=y
CONFIG_DRIVERS_CDCACM_AUTOSTART=y
CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
CONFIG_COMMON_DISTANCE_SENSOR=y
CONFIG_DRIVERS_DSHOT=y
CONFIG_DRIVERS_GPS=y
CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
CONFIG_COMMON_LIGHT=y
CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
CONFIG_DRIVERS_MAGNETOMETER_LIS3MDL=y
CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
CONFIG_DRIVERS_OSD_MSP_OSD=y
CONFIG_COMMON_OPTICAL_FLOW=y
CONFIG_DRIVERS_PWM_OUT=y
CONFIG_DRIVERS_RC_INPUT=y
CONFIG_COMMON_TELEMETRY=y
CONFIG_DRIVERS_TONE_ALARM=y
CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
CONFIG_MODULES_BATTERY_STATUS=y
CONFIG_MODULES_COMMANDER=y
CONFIG_MODULES_CONTROL_ALLOCATOR=y
CONFIG_MODULES_DATAMAN=y
CONFIG_MODULES_EKF2=y
# CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
# CONFIG_EKF2_AUXVEL is not set
# CONFIG_EKF2_BARO_COMPENSATION is not set
# CONFIG_EKF2_DRAG_FUSION is not set
# CONFIG_EKF2_GNSS_YAW is not set
# CONFIG_EKF2_SIDESLIP is not set
CONFIG_MODULES_EVENTS=y
CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
CONFIG_MODULES_FW_ATT_CONTROL=y
CONFIG_MODULES_FW_MODE_MANAGER=y
CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
CONFIG_MODULES_FW_RATE_CONTROL=y
CONFIG_MODULES_GYRO_CALIBRATION=y
CONFIG_MODULES_GYRO_FFT=y
CONFIG_MODULES_LAND_DETECTOR=y
CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
CONFIG_MODULES_LOAD_MON=y
CONFIG_MODULES_LOGGER=y
CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
CONFIG_MODULES_MANUAL_CONTROL=y
CONFIG_MODULES_MAVLINK=y
CONFIG_MODULES_MC_ATT_CONTROL=y
CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
CONFIG_MODULES_MC_POS_CONTROL=y
CONFIG_MODULES_MC_RATE_CONTROL=y
CONFIG_MODULES_NAVIGATOR=y
CONFIG_MODULES_RC_UPDATE=y
CONFIG_MODULES_SENSORS=y
CONFIG_MODULES_UXRCE_DDS_CLIENT=y
CONFIG_MODULES_VTOL_ATT_CONTROL=y
CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
CONFIG_SYSTEMCMDS_BSONDUMP=y
CONFIG_SYSTEMCMDS_DMESG=y
CONFIG_SYSTEMCMDS_GPIO=y
CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
CONFIG_SYSTEMCMDS_I2CDETECT=y
CONFIG_SYSTEMCMDS_LED_CONTROL=y
CONFIG_SYSTEMCMDS_MFT=y
CONFIG_SYSTEMCMDS_MTD=y
CONFIG_SYSTEMCMDS_NSHTERM=y
CONFIG_SYSTEMCMDS_PARAM=y
CONFIG_SYSTEMCMDS_PERF=y
CONFIG_SYSTEMCMDS_REBOOT=y
CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
CONFIG_SYSTEMCMDS_TOP=y
CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
CONFIG_SYSTEMCMDS_UORB=y
CONFIG_SYSTEMCMDS_USB_CONNECTED=y
CONFIG_SYSTEMCMDS_VER=y
CONFIG_SYSTEMCMDS_WORK_QUEUE=y

BIN
boards/gearup/airbrainh743/extras/gearup_airbrainh743_bootloader.bin Executable file
View File

Binary file not shown.

13
boards/gearup/airbrainh743/firmware.prototype Normal file
View File

@ -0,0 +1,13 @@
{
"board_id": 1209,
"magic": "PX4FWv1",
"description": "Firmware for the AirBrainH743 by Gear Up",
"image": "",
"build_time": 0,
"summary": "AirBrainH743",
"version": "0.1",
"image_size": 0,
"image_maxsize": 1966080,
"git_identity": "",
"board_revision": 0
}

17
boards/gearup/airbrainh743/init/rc.board_defaults Normal file
View File

@ -0,0 +1,17 @@
#!/bin/sh
#
# AirBrainH743 board specific defaults
#------------------------------------------------------------------------------
# Battery voltage divider and current scale
param set-default BAT1_V_DIV 15.0
param set-default BAT1_A_PER_V 101.0
# system_power unavailable
param set-default CBRK_SUPPLY_CHK 894281
param set-default IMU_GYRO_RATEMAX 2000
# W25N NAND flash with littlefs (128 MB): larger buffer, auto-rotate
set LOGGER_BUF 32
param set-default SDLOG_DIRS_MAX 3

6
boards/gearup/airbrainh743/init/rc.board_extras Normal file
View File

@ -0,0 +1,6 @@
#!/bin/sh
#
# AirBrainH743 specific board extras init
#------------------------------------------------------------------------------
# No extras configured by default

16
boards/gearup/airbrainh743/init/rc.board_sensors Normal file
View File

@ -0,0 +1,16 @@
#!/bin/sh
#
# AirBrainH743 specific board sensors init
#------------------------------------------------------------------------------
board_adc start
# Internal SPI bus IMU - ICM42688P (Invensensev3)
icm42688p -R 2 -b 1 -s start
# Internal I2C bus barometer - DPS310 @ 0x76 (118 decimal)
dps310 -I -a 118 start
# Internal I2C bus magnetometer - LIS2MDL @ 0x1E (30 decimal)
# Using iis2mdc driver (functionally equivalent to LIS2MDL)
iis2mdc -I -R 2 -a 30 start

3
boards/gearup/airbrainh743/nuttx-config/Kconfig Normal file
View File

@ -0,0 +1,3 @@
#
# Board-specific Kconfig for AirBrainH743
#

89
boards/gearup/airbrainh743/nuttx-config/bootloader/defconfig Normal file
View File

@ -0,0 +1,89 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DEV_CONSOLE is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_SPI_EXCHANGE is not set
# CONFIG_STM32H7_SYSCFG is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/gearup/airbrainh743/nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32h7"
CONFIG_ARCH_CHIP_STM32H743VI=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_INTERRUPTSTACK=768
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_BOARDCTL=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_ASSERT_RESET_VALUE=0
CONFIG_BOARD_INITTHREAD_PRIORITY=254
CONFIG_BOARD_LATE_INITIALIZE=y
CONFIG_BOARD_LOOPSPERMSEC=22114
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_CDCACM=y
CONFIG_CDCACM_PRODUCTID=0x004b
CONFIG_CDCACM_PRODUCTSTR="AirBrainH743 BL"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x3162
CONFIG_CDCACM_VENDORSTR="Gear Up"
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEBUG_TCBINFO=y
CONFIG_DEFAULT_SMALL=y
CONFIG_EXPERIMENTAL=y
CONFIG_FDCLONE_DISABLE=y
CONFIG_FDCLONE_STDIO=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_INIT_ENTRYPOINT="bootloader_main"
CONFIG_INIT_STACKSIZE=3194
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_STRERROR=y
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_PREALLOC_TIMERS=50
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SPI=y
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=32
CONFIG_STM32H7_BKPSRAM=y
CONFIG_STM32H7_DMA1=y
CONFIG_STM32H7_OTGFS=y
CONFIG_STM32H7_PROGMEM=y
CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32H7_TIM1=y
CONFIG_STM32H7_USART1=y
CONFIG_SYSTEMTICK_HOOK=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_TTY_SIGINT=y
CONFIG_TTY_SIGINT_CHAR=0x03
CONFIG_TTY_SIGTSTP=y
CONFIG_USART1_RXBUFSIZE=600
CONFIG_USART1_TXBUFSIZE=300
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000

339
boards/gearup/airbrainh743/nuttx-config/include/board.h Normal file
View File

@ -0,0 +1,339 @@
/************************************************************************************
* nuttx-config/include/board.h
*
* Copyright (C) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __NUTTX_CONFIG_AIRBRAINH743_INCLUDE_BOARD_H
#define __NUTTX_CONFIG_AIRBRAINH743_INCLUDE_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include "board_dma_map.h"
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdmmc.h"
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* The AirBrainH743 board provides the following clock sources:
*
* X1: 8 MHz crystal for HSE
*/
#define STM32_BOARD_XTAL 8000000ul
#define STM32_HSI_FREQUENCY 16000000ul
#define STM32_LSI_FREQUENCY 32000
#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
#define STM32_LSE_FREQUENCY 32768
/* Main PLL Configuration.
*
* PLL source is HSE = 8,000,000
*
* PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
*
* SYSCLK = PLL_VCO / PLLP
* CPUCLK = SYSCLK / D1CPRE
*/
#define STM32_BOARD_USEHSE
#define STM32_PLLCFG_PLLSRC RCC_PLLCKSELR_PLLSRC_HSE
/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
*
* PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
*
* PLL1P = PLL1_VCO/2 = 960 MHz / 2 = 480 MHz
* PLL1Q = PLL1_VCO/4 = 960 MHz / 4 = 240 MHz
* PLL1R = PLL1_VCO/8 = 960 MHz / 8 = 120 MHz
*/
#define STM32_PLLCFG_PLL1CFG (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP1EN | \
RCC_PLLCFGR_DIVQ1EN | \
RCC_PLLCFGR_DIVR1EN)
#define STM32_PLLCFG_PLL1M RCC_PLLCKSELR_DIVM1(1)
#define STM32_PLLCFG_PLL1N RCC_PLL1DIVR_N1(120)
#define STM32_PLLCFG_PLL1P RCC_PLL1DIVR_P1(2)
#define STM32_PLLCFG_PLL1Q RCC_PLL1DIVR_Q1(5)
#define STM32_PLLCFG_PLL1R RCC_PLL1DIVR_R1(8)
#define STM32_VCO1_FREQUENCY ((STM32_HSE_FREQUENCY / 1) * 120)
#define STM32_PLL1P_FREQUENCY (STM32_VCO1_FREQUENCY / 2)
#define STM32_PLL1Q_FREQUENCY (STM32_VCO1_FREQUENCY / 5)
#define STM32_PLL1R_FREQUENCY (STM32_VCO1_FREQUENCY / 8)
/* PLL2 */
#define STM32_PLLCFG_PLL2CFG (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVP2EN | \
RCC_PLLCFGR_DIVQ2EN | \
RCC_PLLCFGR_DIVR2EN)
#define STM32_PLLCFG_PLL2M RCC_PLLCKSELR_DIVM2(2)
#define STM32_PLLCFG_PLL2N RCC_PLL2DIVR_N2(48)
#define STM32_PLLCFG_PLL2P RCC_PLL2DIVR_P2(2)
#define STM32_PLLCFG_PLL2Q RCC_PLL2DIVR_Q2(2)
#define STM32_PLLCFG_PLL2R RCC_PLL2DIVR_R2(2)
#define STM32_VCO2_FREQUENCY ((STM32_HSE_FREQUENCY / 2) * 48)
#define STM32_PLL2P_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
#define STM32_PLL2Q_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
#define STM32_PLL2R_FREQUENCY (STM32_VCO2_FREQUENCY / 2)
/* PLL3 */
#define STM32_PLLCFG_PLL3CFG (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
RCC_PLLCFGR_DIVQ3EN)
#define STM32_PLLCFG_PLL3M RCC_PLLCKSELR_DIVM3(2)
#define STM32_PLLCFG_PLL3N RCC_PLL3DIVR_N3(48)
#define STM32_PLLCFG_PLL3P RCC_PLL3DIVR_P3(2)
#define STM32_PLLCFG_PLL3Q RCC_PLL3DIVR_Q3(4)
#define STM32_PLLCFG_PLL3R RCC_PLL3DIVR_R3(2)
#define STM32_VCO3_FREQUENCY ((STM32_HSE_FREQUENCY / 2) * 48)
#define STM32_PLL3P_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
#define STM32_PLL3Q_FREQUENCY (STM32_VCO3_FREQUENCY / 4)
#define STM32_PLL3R_FREQUENCY (STM32_VCO3_FREQUENCY / 2)
/* SYSCLK = PLL1P = 480MHz
* CPUCLK = SYSCLK / 1 = 480 MHz
*/
#define STM32_RCC_D1CFGR_D1CPRE (RCC_D1CFGR_D1CPRE_SYSCLK)
#define STM32_SYSCLK_FREQUENCY (STM32_PLL1P_FREQUENCY)
#define STM32_CPUCLK_FREQUENCY (STM32_SYSCLK_FREQUENCY / 1)
/* Configure Clock Assignments */
/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
* HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
*/
#define STM32_RCC_D1CFGR_HPRE RCC_D1CFGR_HPRE_SYSCLKd2 /* HCLK = SYSCLK / 2 */
#define STM32_ACLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* ACLK in D1, HCLK3 in D1 */
#define STM32_HCLK_FREQUENCY (STM32_CPUCLK_FREQUENCY / 2) /* HCLK in D2, HCLK4 in D3 */
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE1 RCC_D2CFGR_D2PPRE1_HCLKd2 /* PCLK1 = HCLK / 2 */
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
#define STM32_RCC_D2CFGR_D2PPRE2 RCC_D2CFGR_D2PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
#define STM32_RCC_D1CFGR_D1PPRE RCC_D1CFGR_D1PPRE_HCLKd2 /* PCLK3 = HCLK / 2 */
#define STM32_PCLK3_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB4 clock (PCLK4) is HCLK/2 (120 MHz) */
#define STM32_RCC_D3CFGR_D3PPRE RCC_D3CFGR_D3PPRE_HCLKd2 /* PCLK4 = HCLK / 2 */
#define STM32_PCLK4_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* Timer clock frequencies */
/* Timers driven from APB1 will be twice PCLK1 */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM12_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY)
/* Timers driven from APB2 will be twice PCLK2 */
#define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM15_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM16_CLKIN (2*STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM17_CLKIN (2*STM32_PCLK2_FREQUENCY)
/* Kernel Clock Configuration */
/* I2C123 clock source */
#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
/* I2C4 clock source */
#define STM32_RCC_D3CCIPR_I2C4SRC RCC_D3CCIPR_I2C4SEL_HSI
/* SPI123 clock source */
#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
/* SPI45 clock source */
#define STM32_RCC_D2CCIP1R_SPI45SRC RCC_D2CCIP1R_SPI45SEL_PLL2
/* SPI6 clock source */
#define STM32_RCC_D3CCIPR_SPI6SRC RCC_D3CCIPR_SPI6SEL_PLL2
/* USB 1 and 2 clock source */
#define STM32_RCC_D2CCIP2R_USBSRC RCC_D2CCIP2R_USBSEL_PLL3
/* ADC 1 2 3 clock source */
#define STM32_RCC_D3CCIPR_ADCSRC RCC_D3CCIPR_ADCSEL_PLL2
/* FDCAN 1 clock source */
#define STM32_RCC_D2CCIP1R_FDCANSEL RCC_D2CCIP1R_FDCANSEL_HSE
#define STM32_FDCANCLK STM32_HSE_FREQUENCY
/* FLASH wait states */
#define BOARD_FLASH_WAITSTATES 2
/* LED definitions ******************************************************************/
#define BOARD_LED1 0
#define BOARD_LED2 1
#define BOARD_LED3 2
#define BOARD_NLEDS 3
#define BOARD_LED_RED BOARD_LED1
#define BOARD_LED_GREEN BOARD_LED2
#define BOARD_LED_BLUE BOARD_LED3
/* LED bits for use with board_userled_all() */
#define BOARD_LED1_BIT (1 << BOARD_LED1)
#define BOARD_LED2_BIT (1 << BOARD_LED2)
#define BOARD_LED3_BIT (1 << BOARD_LED3)
#define LED_STARTED 0 /* NuttX has been started OFF OFF OFF */
#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF OFF ON */
#define LED_IRQSENABLED 2 /* Interrupts enabled OFF ON OFF */
#define LED_STACKCREATED 3 /* Idle stack created OFF ON ON */
#define LED_INIRQ 4 /* In an interrupt N/C N/C GLOW */
#define LED_SIGNAL 5 /* In a signal handler N/C GLOW N/C */
#define LED_ASSERTION 6 /* An assertion failed GLOW N/C GLOW */
#define LED_PANIC 7 /* The system has crashed Blink OFF N/C */
#define LED_IDLE 8 /* MCU is is sleep mode ON OFF OFF */
/* Alternate function pin selections ************************************************/
/* USART1 - Debug (PA9 TX, PA10 RX) */
#define GPIO_USART1_RX GPIO_USART1_RX_2 /* PA10 */
#define GPIO_USART1_TX GPIO_USART1_TX_2 /* PA9 */
/* USART2 - RC input (PD5 TX, PD6 RX) */
#define GPIO_USART2_RX GPIO_USART2_RX_2 /* PD6 */
#define GPIO_USART2_TX GPIO_USART2_TX_2 /* PD5 */
/* USART3 - DJI/MSP (PD8 TX, PD9 RX) */
#define GPIO_USART3_RX GPIO_USART3_RX_3 /* PD9 */
#define GPIO_USART3_TX GPIO_USART3_TX_3 /* PD8 */
/* UART4 - General (PB9 TX, PB8 RX) */
#define GPIO_UART4_RX GPIO_UART4_RX_3 /* PB8 */
#define GPIO_UART4_TX GPIO_UART4_TX_3 /* PB9 */
/* UART5 - Companion (PB13 TX, PB12 RX) */
#define GPIO_UART5_RX GPIO_UART5_RX_1 /* PB12 */
#define GPIO_UART5_TX GPIO_UART5_TX_1 /* PB13 */
/* UART7 - ESC telemetry (PE8 TX, PE7 RX) */
#define GPIO_UART7_RX GPIO_UART7_RX_3 /* PE7 */
#define GPIO_UART7_TX GPIO_UART7_TX_3 /* PE8 */
/* UART8 - GPS (PE1 TX, PE0 RX) */
#define GPIO_UART8_RX GPIO_UART8_RX_1 /* PE0 */
#define GPIO_UART8_TX GPIO_UART8_TX_1 /* PE1 */
/* SPI
*
* SPI1: IMU (PA5 SCK, PA6 MISO, PA7 MOSI)
* SPI2: W25N Flash (PD3 SCK, PB14 MISO, PC3 MOSI)
* SPI4: External (PE12 SCK, PE5 MISO, PE6 MOSI)
*/
#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1 /* PA6 */
#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1 /* PA7 */
#define GPIO_SPI1_SCK GPIO_SPI1_SCK_1 /* PA5 */
#define GPIO_SPI2_MISO GPIO_SPI2_MISO_1 /* PB14 */
#define GPIO_SPI2_MOSI GPIO_SPI2_MOSI_3 /* PC3 */
#define GPIO_SPI2_SCK GPIO_SPI2_SCK_5 /* PD3 */
#define GPIO_SPI4_MISO GPIO_SPI4_MISO_2 /* PE5 */
#define GPIO_SPI4_MOSI GPIO_SPI4_MOSI_2 /* PE6 */
#define GPIO_SPI4_SCK GPIO_SPI4_SCK_1 /* PE12 */
/* I2C
*
* I2C1: Internal (PB6 SCL, PB7 SDA)
*/
#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1 /* PB6 */
#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1 /* PB7 */
#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
/* USB
*
* OTG_FS_DM PA11
* OTG_FS_DP PA12
* VBUS PD0
*/
#endif /*__NUTTX_CONFIG_AIRBRAINH743_INCLUDE_BOARD_H */

42
boards/gearup/airbrainh743/nuttx-config/include/board_dma_map.h Normal file
View File

@ -0,0 +1,42 @@
/****************************************************************************
*
* Copyright (c) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#pragma once
/* DMA mapping for SPI1 (IMU) */
#define DMAMAP_SPI1_RX DMAMAP_DMA12_SPI1RX_0 /* DMA1:37 */
#define DMAMAP_SPI1_TX DMAMAP_DMA12_SPI1TX_0 /* DMA1:38 */
/* DMA mapping for SPI2 (W25N Flash) */
#define DMAMAP_SPI2_RX DMAMAP_DMA12_SPI2RX_0 /* DMA1:39 */
#define DMAMAP_SPI2_TX DMAMAP_DMA12_SPI2TX_0 /* DMA1:40 */

257
boards/gearup/airbrainh743/nuttx-config/nsh/defconfig Normal file
View File

@ -0,0 +1,257 @@
#
# This file is autogenerated: PLEASE DO NOT EDIT IT.
#
# You can use "make menuconfig" to make any modifications to the installed .config file.
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
# modifications.
#
# CONFIG_DISABLE_ENVIRON is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
# CONFIG_MMCSD_MMCSUPPORT is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DATE is not set
# CONFIG_NSH_DISABLE_DF is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_ENV is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_EXPORT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_ITEF is not set
# CONFIG_NSH_DISABLE_KILL is not set
# CONFIG_NSH_DISABLE_LOOPS is not set
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MV is not set
# CONFIG_NSH_DISABLE_PRINTF is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SEMICOLON is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_SOURCE is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_TIME is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_SPI_CALLBACK is not set
CONFIG_ARCH="arm"
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/gearup/airbrainh743/nuttx-config"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
CONFIG_ARCH_CHIP="stm32h7"
CONFIG_ARCH_CHIP_STM32H743VI=y
CONFIG_ARCH_CHIP_STM32H7=y
CONFIG_ARCH_INTERRUPTSTACK=512
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARMV7M_BASEPRI_WAR=y
CONFIG_ARMV7M_DCACHE=y
CONFIG_ARMV7M_DTCM=y
CONFIG_ARMV7M_ICACHE=y
CONFIG_ARMV7M_MEMCPY=y
CONFIG_ARMV7M_USEBASEPRI=y
CONFIG_ARM_MPU_EARLY_RESET=y
CONFIG_BOARDCTL_RESET=y
CONFIG_BOARD_ASSERT_RESET_VALUE=0
CONFIG_BOARD_CRASHDUMP=y
CONFIG_BOARD_LOOPSPERMSEC=95150
CONFIG_BOARD_RESET_ON_ASSERT=2
CONFIG_BUILTIN=y
CONFIG_CDCACM=y
CONFIG_CDCACM_IFLOWCONTROL=y
CONFIG_CDCACM_PRODUCTID=0x0050
CONFIG_CDCACM_PRODUCTSTR="AirBrainH743"
CONFIG_CDCACM_RXBUFSIZE=600
CONFIG_CDCACM_TXBUFSIZE=12000
CONFIG_CDCACM_VENDORID=0x3162
CONFIG_CDCACM_VENDORSTR="Gear Up"
CONFIG_DEBUG_FULLOPT=y
CONFIG_DEBUG_HARDFAULT_ALERT=y
CONFIG_DEBUG_MEMFAULT=y
CONFIG_DEBUG_SYMBOLS=y
CONFIG_DEFAULT_SMALL=y
CONFIG_DEV_FIFO_SIZE=0
CONFIG_DEV_PIPE_MAXSIZE=1024
CONFIG_DEV_PIPE_SIZE=70
CONFIG_EXPERIMENTAL=y
CONFIG_FAT_DMAMEMORY=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_LFN_ALIAS_HASH=y
CONFIG_FDCLONE_STDIO=y
CONFIG_FS_BINFS=y
CONFIG_FS_CROMFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FATTIME=y
CONFIG_FS_PROCFS=y
CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
CONFIG_FS_PROCFS_MAX_TASKS=64
CONFIG_FS_PROCFS_REGISTER=y
CONFIG_FS_ROMFS=y
CONFIG_FS_LITTLEFS=y
CONFIG_FS_LITTLEFS_PROGRAM_SIZE_FACTOR=1
CONFIG_FS_LITTLEFS_READ_SIZE_FACTOR=1
CONFIG_FS_LITTLEFS_CACHE_SIZE_FACTOR=1
CONFIG_GRAN=y
CONFIG_GRAN_INTR=y
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
CONFIG_I2C=y
CONFIG_I2C_RESET=y
CONFIG_IDLETHREAD_STACKSIZE=750
CONFIG_INIT_ENTRYPOINT="nsh_main"
CONFIG_INIT_STACKSIZE=3194
CONFIG_LIBC_FLOATINGPOINT=y
CONFIG_LIBC_LONG_LONG=y
CONFIG_LIBC_MAX_EXITFUNS=1
CONFIG_LIBC_STRERROR=y
CONFIG_MEMSET_64BIT=y
CONFIG_MEMSET_OPTSPEED=y
CONFIG_MM_REGIONS=4
CONFIG_MTD=y
CONFIG_MTD_BYTE_WRITE=y
CONFIG_MTD_PARTITION=y
CONFIG_MTD_PROGMEM=y
CONFIG_MTD_W25N=y
CONFIG_W25N_SPIFREQUENCY=104000000
CONFIG_NAME_MAX=40
CONFIG_NSH_ARCHINIT=y
CONFIG_NSH_ARGCAT=y
CONFIG_NSH_BUILTIN_APPS=y
CONFIG_NSH_CMDPARMS=y
CONFIG_NSH_CROMFSETC=y
CONFIG_NSH_LINELEN=128
CONFIG_NSH_MAXARGUMENTS=15
CONFIG_NSH_NESTDEPTH=8
CONFIG_NSH_QUOTE=y
CONFIG_NSH_ROMFSETC=y
CONFIG_NSH_ROMFSSECTSIZE=128
CONFIG_NSH_STRERROR=y
CONFIG_NSH_VARS=y
CONFIG_OTG_ID_GPIO_DISABLE=y
CONFIG_PIPES=y
CONFIG_PREALLOC_TIMERS=50
CONFIG_PRIORITY_INHERITANCE=y
CONFIG_PTHREAD_MUTEX_ROBUST=y
CONFIG_PTHREAD_STACK_MIN=512
CONFIG_RAM_SIZE=245760
CONFIG_RAM_START=0x20010000
CONFIG_RAW_BINARY=y
CONFIG_READLINE_CMD_HISTORY=y
CONFIG_READLINE_TABCOMPLETION=y
CONFIG_RTC_DATETIME=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_HPWORKPRIORITY=249
CONFIG_SCHED_HPWORKSTACKSIZE=1280
CONFIG_SCHED_INSTRUMENTATION=y
CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
CONFIG_SCHED_LPWORK=y
CONFIG_SCHED_LPWORKPRIORITY=50
CONFIG_SCHED_LPWORKSTACKSIZE=1632
CONFIG_SCHED_WAITPID=y
CONFIG_SEM_PREALLOCHOLDERS=32
CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
CONFIG_SERIAL_TERMIOS=y
CONFIG_SIG_DEFAULT=y
CONFIG_SIG_SIGALRM_ACTION=y
CONFIG_SIG_SIGUSR1_ACTION=y
CONFIG_SIG_SIGUSR2_ACTION=y
CONFIG_SIG_SIGWORK=4
CONFIG_STACK_COLORATION=y
CONFIG_START_DAY=30
CONFIG_START_MONTH=11
CONFIG_STDIO_BUFFER_SIZE=256
CONFIG_STM32H7_ADC1=y
CONFIG_STM32H7_ADC3=y
CONFIG_STM32H7_BBSRAM=y
CONFIG_STM32H7_BBSRAM_FILES=5
CONFIG_STM32H7_BDMA=y
CONFIG_STM32H7_BKPSRAM=y
CONFIG_STM32H7_DMA1=y
CONFIG_STM32H7_DMA2=y
CONFIG_STM32H7_DMACAPABLE=y
CONFIG_STM32H7_DMAMUX1=y
CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
CONFIG_STM32H7_I2C1=y
CONFIG_STM32H7_I2C_DYNTIMEO=y
CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
CONFIG_STM32H7_OTGFS=y
CONFIG_STM32H7_PROGMEM=y
CONFIG_STM32H7_RTC=y
CONFIG_STM32H7_RTC_HSECLOCK=y
CONFIG_STM32H7_RTC_MAGIC_REG=1
CONFIG_STM32H7_SAVE_CRASHDUMP=y
CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
CONFIG_STM32H7_SPI1=y
CONFIG_STM32H7_SPI1_DMA=y
CONFIG_STM32H7_SPI1_DMA_BUFFER=4096
CONFIG_STM32H7_SPI2=y
CONFIG_STM32H7_SPI2_DMA=y
CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
CONFIG_STM32H7_SPI4=y
CONFIG_STM32H7_TIM1=y
CONFIG_STM32H7_TIM2=y
CONFIG_STM32H7_TIM3=y
CONFIG_STM32H7_TIM5=y
CONFIG_STM32H7_TIM8=y
CONFIG_STM32H7_UART4=y
CONFIG_STM32H7_UART5=y
CONFIG_STM32H7_UART7=y
CONFIG_STM32H7_UART8=y
CONFIG_STM32H7_USART1=y
CONFIG_STM32H7_USART2=y
CONFIG_STM32H7_USART3=y
CONFIG_STM32H7_USART_BREAKS=y
CONFIG_STM32H7_USART_INVERT=y
CONFIG_STM32H7_USART_SINGLEWIRE=y
CONFIG_STM32H7_USART_SWAP=y
CONFIG_SYSTEM_CDCACM=y
CONFIG_SYSTEM_NSH=y
CONFIG_TASK_NAME_SIZE=24
CONFIG_TTY_SIGINT=y
CONFIG_TTY_SIGTSTP=y
CONFIG_UART4_BAUD=57600
CONFIG_UART4_RXBUFSIZE=600
CONFIG_UART4_TXBUFSIZE=1500
CONFIG_UART5_BAUD=57600
CONFIG_UART5_RXBUFSIZE=600
CONFIG_UART5_TXBUFSIZE=1500
CONFIG_UART7_BAUD=57600
CONFIG_UART7_RXBUFSIZE=600
CONFIG_UART7_TXBUFSIZE=1500
CONFIG_UART8_BAUD=57600
CONFIG_UART8_RXBUFSIZE=600
CONFIG_UART8_TXBUFSIZE=1500
CONFIG_USART1_BAUD=57600
CONFIG_USART1_RXBUFSIZE=600
CONFIG_USART1_SERIAL_CONSOLE=y
CONFIG_USART1_TXBUFSIZE=1500
CONFIG_USART2_BAUD=57600
CONFIG_USART2_RXBUFSIZE=600
CONFIG_USART2_TXBUFSIZE=1500
CONFIG_USART3_BAUD=57600
CONFIG_USART3_RXBUFSIZE=600
CONFIG_USART3_TXBUFSIZE=1500
CONFIG_USBDEV=y
CONFIG_USBDEV_BUSPOWERED=y
CONFIG_USBDEV_MAXPOWER=500
CONFIG_USEC_PER_TICK=1000
CONFIG_WATCHDOG=y

213
boards/gearup/airbrainh743/nuttx-config/scripts/bootloader_script.ld Normal file
View File

@ -0,0 +1,213 @@
/****************************************************************************
* scripts/script.ld
*
* Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The Durandal-v1 uses an STM32H743II has 2048Kb of main FLASH memory.
* The flash memory is partitioned into a User Flash memory and a System
* Flash memory. Each of these memories has two banks:
*
* 1) User Flash memory:
*
* Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
* Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
*
* 2) System Flash memory:
*
* Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
* Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
*
* 3) User option bytes for user configuration, only in Bank 1.
*
* In the STM32H743II, two different boot spaces can be selected through
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
* BOOT_ADD1 option bytes:
*
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
* ST programmed value: Flash memory at 0x0800:0000
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
* ST programmed value: System bootloader at 0x1FF0:0000
*
* The Durandal has a Switch on board, the BOOT0 pin is at ground so by default,
* the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
* drepresed, then the boot will be from 0x1FF0:0000
*
* The STM32H743ZI also has 1024Kb of data SRAM.
* SRAM is split up into several blocks and into three power domains:
*
* 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
* 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
*
* 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
*
* The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
* DTCM ports. The DTCM-RAM could be used for critical real-time
* data, such as interrupt service routines or stack / heap memory.
* Both DTCM-RAMs can be used in parallel (for load/store operations)
* thanks to the Cortex-M7 dual issue capability.
*
* 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000
*
* This RAM is connected to ITCM 64-bit interface designed for
* execution of critical real-times routines by the CPU.
*
* 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
* through D1 domain AXI bus matrix
*
* 2.1) 512Kb of SRAM beginning at address 0x2400:0000
*
* 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
* through D2 domain AHB bus matrix
*
* 3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
* 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
* 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000
*
* SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
*
* 4) AHB SRAM (D3 domain) accessible by most of system masters
* through D3 domain AHB bus matrix
*
* 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000
* 4.1) 4Kb of backup RAM beginning at address 0x3880:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*/
MEMORY
{
itcm (rwx) : ORIGIN = 0x00000000, LENGTH = 64K
flash (rx) : ORIGIN = 0x08000000, LENGTH = 2048K
dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH = 64K
sram (rwx) : ORIGIN = 0x24000000, LENGTH = 512K
sram1 (rwx) : ORIGIN = 0x30000000, LENGTH = 128K
sram2 (rwx) : ORIGIN = 0x30020000, LENGTH = 128K
sram3 (rwx) : ORIGIN = 0x30040000, LENGTH = 32K
sram4 (rwx) : ORIGIN = 0x38000000, LENGTH = 64K
bbram (rwx) : ORIGIN = 0x38800000, LENGTH = 4K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
EXTERN(_bootdelay_signature)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
. = ALIGN(32);
/*
This signature provides the bootloader with a way to delay booting
*/
_bootdelay_signature = ABSOLUTE(.);
FILL(0xffecc2925d7d05c5)
. += 8;
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

228
boards/gearup/airbrainh743/nuttx-config/scripts/script.ld Normal file
View File

@ -0,0 +1,228 @@
/****************************************************************************
* scripts/script.ld
*
* Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The board uses an STM32H743II and has 2048Kb of main FLASH memory.
* The flash memory is partitioned into a User Flash memory and a System
* Flash memory. Each of these memories has two banks:
*
* 1) User Flash memory:
*
* Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
* Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
*
* 2) System Flash memory:
*
* Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
* Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
*
* 3) User option bytes for user configuration, only in Bank 1.
*
* In the STM32H743II, two different boot spaces can be selected through
* the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
* BOOT_ADD1 option bytes:
*
* 1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
* ST programmed value: Flash memory at 0x0800:0000
* 2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
* ST programmed value: System bootloader at 0x1FF0:0000
*
* There's a switch on board, the BOOT0 pin is at ground so by default,
* the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
* drepresed, then the boot will be from 0x1FF0:0000
*
* The STM32H743ZI also has 1024Kb of data SRAM.
* SRAM is split up into several blocks and into three power domains:
*
* 1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
* 0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
*
* 1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
*
* The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
* DTCM ports. The DTCM-RAM could be used for critical real-time
* data, such as interrupt service routines or stack / heap memory.
* Both DTCM-RAMs can be used in parallel (for load/store operations)
* thanks to the Cortex-M7 dual issue capability.
*
* 1.2) 64Kb of ITCM-RAM beginning at address 0x0000:0000
*
* This RAM is connected to ITCM 64-bit interface designed for
* execution of critical real-times routines by the CPU.
*
* 2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
* through D1 domain AXI bus matrix
*
* 2.1) 512Kb of SRAM beginning at address 0x2400:0000
*
* 3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
* through D2 domain AHB bus matrix
*
* 3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
* 3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
* 3.3) 32Kb of SRAM3 beginning at address 0x3004:0000
*
* SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
*
* 4) AHB SRAM (D3 domain) accessible by most of system masters
* through D3 domain AHB bus matrix
*
* 4.1) 64Kb of SRAM4 beginning at address 0x3800:0000
* 4.1) 4Kb of backup RAM beginning at address 0x3880:0000
*
* When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
* where the code expects to begin execution by jumping to the entry point in
* the 0x0800:0000 address range.
*/
MEMORY
{
ITCM_RAM (rwx) : ORIGIN = 0x00000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */
DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH = 64K
AXI_SRAM (rwx) : ORIGIN = 0x24000000, LENGTH = 512K /* D1 domain AXI bus */
SRAM1 (rwx) : ORIGIN = 0x30000000, LENGTH = 128K /* D2 domain AHB bus */
SRAM2 (rwx) : ORIGIN = 0x30020000, LENGTH = 128K /* D2 domain AHB bus */
SRAM3 (rwx) : ORIGIN = 0x30040000, LENGTH = 32K /* D2 domain AHB bus */
SRAM4 (rwx) : ORIGIN = 0x38000000, LENGTH = 64K /* D3 domain */
BKPRAM (rwx) : ORIGIN = 0x38800000, LENGTH = 4K
}
OUTPUT_ARCH(arm)
EXTERN(_vectors)
ENTRY(_stext)
/*
* Ensure that abort() is present in the final object. The exception handling
* code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
*/
EXTERN(abort)
EXTERN(_bootdelay_signature)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
. = ALIGN(32);
/*
This signature provides the bootloader with a way to delay booting
*/
_bootdelay_signature = ABSOLUTE(.);
FILL(0xffecc2925d7d05c5)
. += 8;
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > FLASH
/*
* Init functions (static constructors and the like)
*/
.init_section : {
_sinit = ABSOLUTE(.);
KEEP(*(.init_array .init_array.*))
_einit = ABSOLUTE(.);
} > FLASH
.ARM.extab : {
*(.ARM.extab*)
} > FLASH
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > FLASH
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
. = ALIGN(16);
FILL(0xffff)
. += 16;
} > AXI_SRAM AT > FLASH = 0xffff
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
. = ALIGN(4);
_ebss = ABSOLUTE(.);
} > AXI_SRAM
/* Emit the the D3 power domain section for locating BDMA data */
.sram4_reserve (NOLOAD) :
{
*(.sram4)
. = ALIGN(4);
_sram4_heap_start = ABSOLUTE(.);
} > SRAM4
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

67
boards/gearup/airbrainh743/src/CMakeLists.txt Normal file
View File

@ -0,0 +1,67 @@
############################################################################
#
# Copyright (c) 2026 PX4 Development Team. All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name PX4 nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
if("${PX4_BOARD_LABEL}" STREQUAL "bootloader")
add_library(drivers_board
bootloader_main.c
usb.c
)
target_link_libraries(drivers_board
PRIVATE
nuttx_arch
nuttx_drivers
bootloader
)
target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
else()
add_library(drivers_board
i2c.cpp
init.c
led.c
spi.cpp
timer_config.cpp
usb.c
)
add_dependencies(drivers_board arch_board_hw_info)
target_link_libraries(drivers_board
PRIVATE
arch_io_pins
arch_spi
arch_board_hw_info
drivers__led
nuttx_arch
nuttx_drivers
px4_layer
)
endif()

216
boards/gearup/airbrainh743/src/board_config.h Normal file
View File

@ -0,0 +1,216 @@
/****************************************************************************
*
* Copyright (c) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file board_config.h
*
* AirBrainH743 (Gear Up) internal definitions
*/
#pragma once
/****************************************************************************************************
* Included Files
****************************************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
#include <stm32_gpio.h>
/****************************************************************************************************
* Definitions
****************************************************************************************************/
/* Enable small flash logging support (for W25N NAND flash) */
#ifdef CONFIG_MTD_W25N
# define BOARD_SMALL_FLASH_LOGGING 1
#endif
/* LEDs are active low
* STAT RGB LED:
* PB15 = Blue
* PD11 = Green
* PD15 = Red
* BAT LED (orange): hardwired to power input
*/
#define GPIO_nLED_BLUE /* PB15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15)
#define GPIO_nLED_GREEN /* PD11 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN11)
#define GPIO_nLED_RED /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN15)
#define BOARD_HAS_CONTROL_STATUS_LEDS 1
#define BOARD_OVERLOAD_LED LED_RED
#define BOARD_ARMED_STATE_LED LED_GREEN
/*
* ADC channels
*
* These are the channel numbers of the ADCs of the microcontroller that
* can be used by the Px4 Firmware in the adc driver
*/
/* ADC defines to be used in sensors.cpp to read from a particular channel */
#define ADC1_CH(n) (n)
/* Define GPIO pins used as ADC N.B. Channel numbers must match below */
#define PX4_ADC_GPIO \
/* PC4 */ GPIO_ADC12_INP4, \
/* PC5 */ GPIO_ADC12_INP8
/* Define Channel numbers must match above GPIO pin IN(n)*/
#define ADC_BATTERY_VOLTAGE_CHANNEL /* PC4 */ ADC1_CH(4)
#define ADC_BATTERY_CURRENT_CHANNEL /* PC5 */ ADC1_CH(8)
#define ADC_CHANNELS \
((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
(1 << ADC_BATTERY_CURRENT_CHANNEL))
/* Define Battery Voltage Divider and A per V
*/
#define BOARD_BATTERY1_V_DIV (15.0f)
#define BOARD_BATTERY1_A_PER_V (101.0f)
/* PWM
* 8 PWM outputs for motors + 1 for LED strip
*/
#define DIRECT_PWM_OUTPUT_CHANNELS 9
#define DIRECT_INPUT_TIMER_CHANNELS 9
#define BOARD_HAS_PWM DIRECT_PWM_OUTPUT_CHANNELS
/* Tone alarm output - PA15 */
#define GPIO_TONE_ALARM_IDLE /* PA15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
#define GPIO_TONE_ALARM_GPIO /* PA15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN15)
/* ICM42688P FSYNC - directly connected to IMU via GPIO (no timer).
* The driver clears TMST_FSYNC_EN and FIFO_TMST_FSYNC_EN, so FSYNC is unused.
* This GPIO is kept low to prevent spurious triggers.
*/
#define GPIO_42688P_FSYNC /* PC7 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN7)
/* USB OTG FS
*
* PD0 VBUS sensing (active high input)
*/
#define GPIO_OTGFS_VBUS /* PD0 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTD|GPIO_PIN0)
/* High-resolution timer */
#define HRT_TIMER 8 /* use timer8 for the HRT */
#define HRT_TIMER_CHANNEL 3 /* use capture/compare channel 3 */
/*
* Serial Port Mapping:
*
* UART Device Pins Function
* ---- ------ ---- --------
* USART1 /dev/ttyS0 PA9/PA10 Console/Debug
* USART2 /dev/ttyS1 PD5/PD6 RC Input
* USART3 /dev/ttyS2 PD8/PD9 TEL4 (DJI/MSP)
* UART4 /dev/ttyS3 PA0/PA1 TEL1
* UART5 /dev/ttyS4 PB13/PB12 TEL2
* UART7 /dev/ttyS5 PE8/PE7 TEL3 (ESC Telemetry)
* UART8 /dev/ttyS6 PE1/PE0 GPS1
*/
/* RC Serial port - USART2 (PD5/PD6) */
#define RC_SERIAL_PORT "/dev/ttyS1"
#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT
/* This board provides a DMA pool and APIs */
#define BOARD_DMA_ALLOC_POOL_SIZE 5120
/* This board provides the board_on_reset interface */
#define BOARD_HAS_ON_RESET 1
#define PX4_GPIO_INIT_LIST { \
PX4_ADC_GPIO, \
GPIO_nLED_RED, \
GPIO_nLED_GREEN, \
GPIO_nLED_BLUE, \
GPIO_TONE_ALARM_IDLE, \
GPIO_42688P_FSYNC, \
}
#define BOARD_ENABLE_CONSOLE_BUFFER
#define BOARD_NUM_IO_TIMERS 4
__BEGIN_DECLS
/****************************************************************************************************
* Public Types
****************************************************************************************************/
/****************************************************************************************************
* Public data
****************************************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************************************
* Public Functions
****************************************************************************************************/
/****************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the board.
*
****************************************************************************/
extern void stm32_spiinitialize(void);
extern void stm32_usbinitialize(void);
extern void board_peripheral_reset(int ms);
/* Parameters stored in internal flash */
#define FLASH_BASED_PARAMS
#include <px4_platform_common/board_common.h>
#endif /* __ASSEMBLY__ */
__END_DECLS

75
boards/gearup/airbrainh743/src/bootloader_main.c Normal file
View File

@ -0,0 +1,75 @@
/****************************************************************************
*
* Copyright (c) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file bootloader_main.c
*
* AirBrainH743-specific early startup code for bootloader
*/
#include "board_config.h"
#include "bl.h"
#include <nuttx/config.h>
#include <nuttx/board.h>
#include <chip.h>
#include <stm32_uart.h>
#include <arch/board/board.h>
#include "arm_internal.h"
#include <px4_platform_common/init.h>
extern int sercon_main(int c, char **argv);
__EXPORT void board_on_reset(int status) {}
__EXPORT void stm32_boardinitialize(void)
{
/* configure USB interfaces */
stm32_usbinitialize();
}
__EXPORT int board_app_initialize(uintptr_t arg)
{
return 0;
}
void board_late_initialize(void)
{
sercon_main(0, NULL);
}
extern void sys_tick_handler(void);
void board_timerhook(void)
{
sys_tick_handler();
}

85
boards/gearup/airbrainh743/src/hw_config.h Normal file
View File

@ -0,0 +1,85 @@
/****************************************************************************
*
* Copyright (C) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#pragma once
#define APP_LOAD_ADDRESS 0x08020000
#define BOOTLOADER_DELAY 5000
#define INTERFACE_USB 1
#define INTERFACE_USB_CONFIG "/dev/ttyACM0"
#define BOARD_VBUS MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
#define INTERFACE_USART 1
#define INTERFACE_USART_CONFIG "/dev/ttyS0,57600"
#define BOOT_DELAY_ADDRESS 0x000001a0
#define BOARD_TYPE 1209
#define _FLASH_KBYTES (*(uint32_t *)0x1FF1E880)
#define BOARD_FLASH_SECTORS (14)
#define BOARD_FLASH_SIZE (_FLASH_KBYTES * 1024)
#define OSC_FREQ 8
#define BOARD_PIN_LED_ACTIVITY GPIO_nLED_BLUE
#define BOARD_PIN_LED_BOOTLOADER GPIO_nLED_GREEN
#define BOARD_LED_ON 0
#define BOARD_LED_OFF 1
#define SERIAL_BREAK_DETECT_DISABLED 1
#if !defined(ARCH_SN_MAX_LENGTH)
# define ARCH_SN_MAX_LENGTH 12
#endif
/* Reserve 128KB (1 sector) at end of flash for parameters */
#define APP_RESERVATION_SIZE (1 * 128 * 1024)
#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
# define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
#endif
#if !defined(USB_DATA_ALIGN)
# define USB_DATA_ALIGN
#endif
#ifndef BOOT_DEVICES_SELECTION
# define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif
#ifndef BOOT_DEVICES_FILTER_ONUSB
# define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
#endif
/* Boot device selection list*/
#define USB0_DEV 0x01
#define SERIAL0_DEV 0x02
#define SERIAL1_DEV 0x04

45
boards/gearup/airbrainh743/src/i2c.cpp Normal file
View File

@ -0,0 +1,45 @@
/****************************************************************************
*
* Copyright (C) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/i2c_hw_description.h>
/*
* I2C bus configuration for AirBrainH743
*
* I2C1: Internal bus - PB6 (SCL), PB7 (SDA)
* Devices: DPS310 baro @ 0x76, LIS2MDL compass @ 0x1E
*/
constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
initI2CBusInternal(1),
};

228
boards/gearup/airbrainh743/src/init.c Normal file
View File

@ -0,0 +1,228 @@
/****************************************************************************
*
* Copyright (c) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file init.c
*
* AirBrainH743-specific early startup code.
*/
#include "board_config.h"
#include <stdbool.h>
#include <stdio.h>
#include <string.h>
#include <debug.h>
#include <errno.h>
#include <syslog.h>
#include <nuttx/config.h>
#include <nuttx/board.h>
#include <nuttx/spi/spi.h>
#include <nuttx/mtd/mtd.h>
#include <nuttx/fs/fs.h>
#include <arch/board/board.h>
#include "arm_internal.h"
#include <drivers/drv_hrt.h>
#include <drivers/drv_board_led.h>
#include <systemlib/px4_macros.h>
#include <px4_arch/io_timer.h>
#include <px4_platform_common/init.h>
#include <px4_platform/gpio.h>
#include <px4_platform/board_dma_alloc.h>
#if defined(FLASH_BASED_PARAMS)
#include <parameters/flashparams/flashfs.h>
#endif
#ifdef CONFIG_MTD_W25N
extern FAR struct mtd_dev_s *w25n_initialize(FAR struct spi_dev_s *dev, uint32_t spi_devid);
#endif
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
__END_DECLS
/************************************************************************************
* Name: board_peripheral_reset
*
* Description:
*
************************************************************************************/
__EXPORT void board_peripheral_reset(int ms)
{
UNUSED(ms);
}
/************************************************************************************
* Name: board_on_reset
*
* Description:
* Optionally provided function called on entry to board_system_reset
* It should perform any house keeping prior to the rest.
*
* status - 1 if resetting to boot loader
* 0 if just resetting
*
************************************************************************************/
__EXPORT void board_on_reset(int status)
{
for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
}
if (status >= 0) {
up_mdelay(100);
}
}
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point.
*
************************************************************************************/
__EXPORT void stm32_boardinitialize(void)
{
/* Reset PWM first thing */
board_on_reset(-1);
/* configure LEDs */
board_autoled_initialize();
/* configure pins */
const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
px4_gpio_init(gpio, arraySize(gpio));
/* configure USB interfaces */
stm32_usbinitialize();
}
/****************************************************************************
* Name: board_app_initialize
*
* Description:
* Perform application specific initialization.
*
****************************************************************************/
__EXPORT int board_app_initialize(uintptr_t arg)
{
/* Need hrt running before using the ADC */
px4_platform_init();
/* configure SPI interfaces */
stm32_spiinitialize();
/* configure the DMA allocator */
if (board_dma_alloc_init() < 0) {
syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
}
/* initial LED state */
drv_led_start();
led_off(LED_RED);
led_off(LED_GREEN);
led_off(LED_BLUE);
if (board_hardfault_init(2, true) != 0) {
led_on(LED_RED);
}
#ifdef CONFIG_MTD_W25N
/* Initialize W25N01GV NAND Flash on SPI2 */
struct spi_dev_s *spi2 = stm32_spibus_initialize(2);
if (!spi2) {
syslog(LOG_ERR, "[boot] FAILED to initialize SPI2 for W25N\n");
led_on(LED_RED);
} else {
struct mtd_dev_s *mtd = w25n_initialize(spi2, 0);
if (!mtd) {
syslog(LOG_ERR, "[boot] FAILED to initialize W25N MTD driver\n");
led_on(LED_RED);
} else {
int ret = register_mtddriver("/dev/mtd0", mtd, 0755, NULL);
if (ret < 0) {
syslog(LOG_ERR, "[boot] FAILED to register MTD driver: %d\n", ret);
led_on(LED_RED);
} else {
syslog(LOG_INFO, "[boot] W25N MTD registered at /dev/mtd0\n");
#ifdef CONFIG_FS_LITTLEFS
ret = nx_mount("/dev/mtd0", "/fs/microsd", "littlefs", 0, "autoformat");
if (ret < 0) {
syslog(LOG_ERR, "[boot] FAILED to mount littlefs: %d\n", ret);
led_on(LED_RED);
} else {
syslog(LOG_INFO, "[boot] LittleFS mounted at /fs/microsd\n");
}
#endif
}
}
}
#endif
#if defined(FLASH_BASED_PARAMS)
/* Initialize parameters in internal flash (sector 15, 128KB at 0x081E0000) */
static sector_descriptor_t params_sector_map[] = {
{15, 128 * 1024, 0x081E0000},
{0, 0, 0},
};
int result = parameter_flashfs_init(params_sector_map, NULL, 0);
if (result != OK) {
syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
led_on(LED_RED);
}
#endif
/* Configure the HW based on the manifest */
px4_platform_configure();
return OK;
}

205
boards/gearup/airbrainh743/src/led.c Normal file
View File

@ -0,0 +1,205 @@
/****************************************************************************
*
* Copyright (c) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_platform_common/px4_config.h>
#include <stdbool.h>
#include "chip.h"
#include "stm32_gpio.h"
#include "board_config.h"
#include <nuttx/board.h>
#include <arch/board/board.h>
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
extern void led_toggle(int led);
__END_DECLS
#ifdef CONFIG_ARCH_LEDS
static bool nuttx_owns_leds = true;
static const uint8_t xlatpx4[] = {1, 2, 4, 0};
# define xlat(p) xlatpx4[(p)]
static uint32_t g_ledmap[] = {
GPIO_nLED_RED, // Indexed by BOARD_LED_RED
GPIO_nLED_GREEN, // Indexed by BOARD_LED_GREEN
GPIO_nLED_BLUE, // Indexed by BOARD_LED_BLUE
};
#else
# define xlat(p) (p)
static uint32_t g_ledmap[] = {
GPIO_nLED_RED, // LED_RED
GPIO_nLED_GREEN, // LED_GREEN
GPIO_nLED_BLUE, // LED_BLUE
};
#endif
__EXPORT void led_init(void)
{
for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
if (g_ledmap[l] != 0) {
stm32_configgpio(g_ledmap[l]);
}
}
}
static void phy_set_led(int led, bool state)
{
/* Drive Low to switch on (active low LEDs) */
if (led < (int)(sizeof(g_ledmap) / sizeof(g_ledmap[0])) && g_ledmap[led] != 0) {
stm32_gpiowrite(g_ledmap[led], !state);
}
}
static bool phy_get_led(int led)
{
/* If Low it is on */
if (led < (int)(sizeof(g_ledmap) / sizeof(g_ledmap[0])) && g_ledmap[led] != 0) {
return !stm32_gpioread(g_ledmap[led]);
}
return false;
}
__EXPORT void led_on(int led)
{
phy_set_led(xlat(led), true);
}
__EXPORT void led_off(int led)
{
phy_set_led(xlat(led), false);
}
__EXPORT void led_toggle(int led)
{
phy_set_led(xlat(led), !phy_get_led(xlat(led)));
}
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Public Functions
****************************************************************************/
void board_autoled_initialize(void)
{
led_init();
}
void board_autoled_on(int led)
{
if (!nuttx_owns_leds) {
return;
}
switch (led) {
default:
break;
case LED_HEAPALLOCATE:
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_IRQSENABLED:
phy_set_led(BOARD_LED_BLUE, false);
phy_set_led(BOARD_LED_GREEN, true);
break;
case LED_STACKCREATED:
phy_set_led(BOARD_LED_GREEN, true);
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_INIRQ:
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_SIGNAL:
phy_set_led(BOARD_LED_GREEN, true);
break;
case LED_ASSERTION:
phy_set_led(BOARD_LED_RED, true);
phy_set_led(BOARD_LED_BLUE, true);
break;
case LED_PANIC:
phy_set_led(BOARD_LED_RED, true);
break;
case LED_IDLE:
phy_set_led(BOARD_LED_RED, true);
break;
}
}
void board_autoled_off(int led)
{
if (!nuttx_owns_leds) {
return;
}
switch (led) {
default:
break;
case LED_SIGNAL:
phy_set_led(BOARD_LED_GREEN, false);
break;
case LED_INIRQ:
phy_set_led(BOARD_LED_BLUE, false);
break;
case LED_ASSERTION:
phy_set_led(BOARD_LED_RED, false);
phy_set_led(BOARD_LED_BLUE, false);
break;
case LED_PANIC:
phy_set_led(BOARD_LED_RED, false);
break;
case LED_IDLE:
phy_set_led(BOARD_LED_RED, false);
break;
}
}
#endif /* CONFIG_ARCH_LEDS */

58
boards/gearup/airbrainh743/src/spi.cpp Normal file
View File

@ -0,0 +1,58 @@
/****************************************************************************
*
* Copyright (C) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/spi_hw_description.h>
#include <drivers/drv_sensor.h>
#include <nuttx/spi/spi.h>
/*
* SPI bus configuration for AirBrainH743
*
* SPI1: IMU (Invensensev3/ICM42688P) - PA5 SCK, PA6 MISO, PA7 MOSI, PA3 CS
* SPI2: W25N Flash - PD3 SCK, PB14 MISO, PC3 MOSI, PD4 CS
* SPI4: External/AUX - PE12 SCK, PE5 MISO, PE6 MOSI
*/
constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
initSPIBus(SPI::Bus::SPI1, {
initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin3}),
}),
initSPIBus(SPI::Bus::SPI2, {
initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortD, GPIO::Pin4}), // W25N Flash
}),
initSPIBusExternal(SPI::Bus::SPI4, {
initSPIConfigExternal(SPI::CS{GPIO::PortB, GPIO::Pin3}), // User 1 GPIO as chip select
}),
};
static constexpr bool unused = validateSPIConfig(px4_spi_buses);

70
boards/gearup/airbrainh743/src/timer_config.cpp Normal file
View File

@ -0,0 +1,70 @@
/****************************************************************************
*
* Copyright (C) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <px4_arch/io_timer_hw_description.h>
/*
* PWM output configuration for AirBrainH743
*
* M1: PE14 (TIM1_CH4)
* M2: PE13 (TIM1_CH3)
* M3: PE11 (TIM1_CH2)
* M4: PE9 (TIM1_CH1)
* M5: PB0 (TIM3_CH3)
* M6: PB1 (TIM3_CH4)
* M7: PB10 (TIM2_CH3)
* M8: PB11 (TIM2_CH4)
* M9: PA2 (TIM5_CH3) - LED strip
*/
constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
initIOTimer(Timer::Timer1, DMA{DMA::Index1, DMA::Stream0, DMA::Channel6}),
initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
initIOTimer(Timer::Timer2, DMA{DMA::Index1, DMA::Stream6, DMA::Channel3}),
initIOTimer(Timer::Timer5),
};
constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}), // M1
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}), // M2
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}), // M3
initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}), // M4
initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}), // M5
initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}), // M6
initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel3}, {GPIO::PortB, GPIO::Pin10}), // M7
initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel4}, {GPIO::PortB, GPIO::Pin11}), // M8
initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel3}, {GPIO::PortA, GPIO::Pin2}), // M9 (LED)
};
constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
initIOTimerChannelMapping(io_timers, timer_io_channels);

75
boards/gearup/airbrainh743/src/usb.c Normal file
View File

@ -0,0 +1,75 @@
/****************************************************************************
*
* Copyright (C) 2026 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file usb.c
*
* Board-specific USB functions.
*/
#include "board_config.h"
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbdev_trace.h>
#include <stm32_otg.h>
#include <debug.h>
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the board.
*
************************************************************************************/
__EXPORT void stm32_usbinitialize(void)
{
/* The OTG FS has an internal soft pull-up */
/* Configure the OTG FS VBUS sensing GPIO */
#ifdef CONFIG_STM32H7_OTGFS
stm32_configgpio(GPIO_OTGFS_VBUS);
#endif
}
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
*
************************************************************************************/
__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
uinfo("resume: %d\n", resume);
}

1
docs/en/SUMMARY.md
View File

@ -178,6 +178,7 @@
- [CubePilot Cube Orange (CubePilot)](flight_controller/cubepilot_cube_orange.md)
- [CubePilot Cube Yellow (CubePilot)](flight_controller/cubepilot_cube_yellow.md)
- [Cube Wiring Quickstart](assembly/quick_start_cube.md)
- [Gear Up AirBrainH743](flight_controller/gearup_airbrainh743.md)
- [Holybro Kakute H7v2](flight_controller/kakuteh7v2.md)
- [Holybro Kakute H7mini](flight_controller/kakuteh7mini.md)
- [Holybro Kakute H7](flight_controller/kakuteh7.md)

1
docs/en/flight_controller/autopilot_manufacturer_supported.md
View File

@ -25,6 +25,7 @@ The boards in this category are:
- [CubePilot Cube Orange+](../flight_controller/cubepilot_cube_orangeplus.md)
- [CubePilot Cube Orange](../flight_controller/cubepilot_cube_orange.md)
- [CubePilot Cube Yellow](../flight_controller/cubepilot_cube_yellow.md)
- [Gear Up AirBrainH743](../flight_controller/gearup_airbrainh743.md)
- [Holybro Kakute H7v2](../flight_controller/kakuteh7v2.md)
- [Holybro Kakute H7mini](../flight_controller/kakuteh7mini.md)
- [Holybro Kakute H7](../flight_controller/kakuteh7.md)

96
docs/en/flight_controller/gearup_airbrainh743.md Normal file
View File

@ -0,0 +1,96 @@
# Gear Up AirBrainH743
:::warning
PX4 does not manufacture this (or any) autopilot.
Contact the [manufacturer](https://takeyourgear.com/) for hardware support.
:::
::: info
This flight controller is [manufacturer supported](../flight_controller/autopilot_manufacturer_supported.md).
:::
For more information and pinout, check the [GitHub documentation](https://github.com/GearUp-Company/AirBrainH743).
## Key Features
- MCU: STM32H743 32-bit processor running at 480 MHz
- IMU: ICM42688P
- Barometer: DPS310
- Magnetometer: LIS2MDL (internal)
- 128MB NAND Flash for logging (W25N)
- 7x UARTs
- I2C, SPI
- 9x PWM Outputs (8 Motor outputs, 1 LED strip)
- Battery input voltage: 3S-10S
- Battery voltage/current monitoring
- 5V@2A and 10V@2.5A BEC outputs
- USB Type-C (IP68)
- EMC and ESD protection
## Connectors and Pins
:::warning
The pin order is different from the Pixhawk standard (compatible to the Betaflight standard).
:::
### UARTs
Current UART configuration:
| UART | Device | Function |
| ------ | ---------- | ---------------------------- |
| USART1 | /dev/ttyS0 | Console/Debug |
| USART2 | /dev/ttyS1 | RC Input |
| USART3 | /dev/ttyS2 | TEL4 (DJI/MSP) |
| UART4 | /dev/ttyS3 | TEL1 |
| UART5 | /dev/ttyS4 | TEL2 |
| UART7 | /dev/ttyS5 | TEL3 (ESC Telemetry) |
| UART8 | /dev/ttyS6 | GPS1 |
### Motor/Servo Outputs
| Connector | Pin | Function |
| ----------| ------------------ |
| ESC | M1 | Motor 1 |
| ESC | M2 | Motor 2 |
| ESC | M3 | Motor 3 |
| ESC | M4 | Motor 4 |
| PWM | M5 | Motor 5 |
| PWM | M6 | Motor 6 |
| PWM | M7 | Motor 7 |
| PWM | M8 | Motor 8 |
| AUX | M9 | LED/PWM/etc. |
<a id="bootloader"></a>
## PX4 Bootloader Update
Before PX4 firmware can be installed, the _PX4 bootloader_ must be flashed.
Download the [gearup_airbrainh743_bootloader.bin](https://github.com/PX4/PX4-Autopilot/blob/main/boards/gearup/airbrainh743/extras/gearup_airbrainh743_bootloader.bin) bootloader binary and read [this page](../advanced_config/bootloader_update_from_betaflight.md) for flashing instructions.
## Building Firmware
To [build PX4](../dev_setup/building_px4.md) for this target:
```
make gearup_airbrainh743_default
```
## Installing PX4 Firmware
Firmware can be installed in any of the normal ways:
- Build and upload the source:
```
make gearup_airbrainh743_default upload
```
- [Load the firmware](../config/firmware.md) using _QGroundControl_.
You can use either pre-built firmware or your own custom firmware.
## Debug Port
### System Console
UART1 (ttyS0) is configured for use as the [System Console](../debug/system_console.md).