make demo work with pca.

ucan pwm enablement.
S32K1 fixes.
2026-05-24 02:17:35 +08:00 · 2022-06-01 18:22:23 -04:00 · 2022-06-01 13:36:40 -04:00 · 2022-05-31 16:56:49 -04:00 · 2022-05-26 10:52:08 -04:00 · 2022-05-25 17:44:54 -04:00
2093 changed files with 135636 additions and 42257 deletions
@@ -28,7 +28,7 @@ pipeline {
          ]

          def base_builds = [
-            target: ["px4_sitl_rtps"],
+            target: ["px4_sitl_default"],
            image: docker_images.base,
            archive: false
          ]
@@ -52,22 +52,31 @@ pipeline {
                     "cuav_x7pro_default",
                     "cubepilot_cubeorange_default",
                     "cubepilot_cubeyellow_default",
+                     "diatone_mamba-f405-mk2_default",
                     "freefly_can-rtk-gps_canbootloader",
                     "freefly_can-rtk-gps_default",
                     "holybro_can-gps-v1_canbootloader",
                     "holybro_can-gps-v1_default",
                     "holybro_durandal-v1_default",
                     "holybro_kakutef7_default",
+                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
-                     "matek_h743-slim",
+                     "matek_gnss-m9n-f4_canbootloader",
+                     "matek_gnss-m9n-f4_default",
+                     "matek_h743-mini_default",
+                     "matek_h743-slim_default",
+                     "matek_h743_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7_default",
                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7-oem_rtps",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7_rtps",
                     "mro_pixracerpro_default",
+                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
                     "mro_x21_default",
                     "nxp_fmuk66-e_default",
@@ -80,25 +89,28 @@ pipeline {
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
-                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
+                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
+                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
+                     "px4_fmu-v5_lto",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
-                     "px4_fmu-v5_uavcanv1",
-                     "px4_fmu-v5x_base_phy_DP83848C",
                     "px4_fmu-v5x_default",
+                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
+                     "raspberrypi_pico_default",
+                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
            ],
@@ -168,7 +180,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
            try {
              sh('export')
              checkout(scm)
-              sh('make distclean')
+              sh('make distclean; git clean -ff -x -d .')
              sh('git fetch --tags')
              sh('ccache -s')
              sh('make ' + target)
@@ -185,7 +197,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
              throw (exc)
            }
            finally {
-              sh('make distclean')
+              sh('make distclean; git clean -ff -x -d .')
            }
          }
        }
@@ -21,11 +21,11 @@ pipeline {
                sh 'make cubepilot_cubeorange_bootloader'
                sh 'make cubepilot_cubeorange_test'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*, build/cubepilot_cubeorange_test/etc/init.d/airframes/*', name: 'cubepilot_cubeorange_test'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -42,12 +42,16 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_bootloader/cubepilot_cubeorange_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
                  steps {
                    // run tests
                    runTests()
+
+                    // load all airframes
+                    // sh("./Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` `cd build/cubepilot_cubeorange_test/etc/init.d/airframes/; find . -regex '.*/[0-9].*' -exec basename {} \\; | cut -d '_' -f 1` || true") // test loading all airframes\
                  }
                }
                stage("status") {
@@ -70,8 +74,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
                }
              }
            } // stage test
@@ -92,11 +96,11 @@ pipeline {
                sh 'make cuav_x7pro_bootloader'
                sh 'make cuav_x7pro_test'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'cuav_x7pro_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'cuav_x7pro_test'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -113,6 +117,7 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_bootloader/cuav_x7pro_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
@@ -139,8 +144,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
                }
              }
            } // stage test
@@ -161,11 +166,11 @@ pipeline {
                sh 'make px4_fmu-v3_test'
                sh 'make px4_fmu-v3_test bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3_test'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -182,6 +187,7 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
@@ -208,8 +214,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
                }
              }
            } // stage test
@@ -230,11 +236,11 @@ pipeline {
                sh 'make px4_fmu-v4_test'
                sh 'make px4_fmu-v4_test bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4_test'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -251,6 +257,7 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
@@ -276,8 +283,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
                }
              }
            } // stage test
@@ -298,11 +305,11 @@ pipeline {
                sh 'make px4_fmu-v4pro_test'
                sh 'make px4_fmu-v4pro_test bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4pro_test'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -319,6 +326,7 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
@@ -345,8 +353,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
                }
              }
            } // stage test
@@ -367,11 +375,11 @@ pipeline {
                sh 'make px4_fmu-v5_debug'
                sh 'make px4_fmu-v5_debug bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'px4_fmu-v5_debug'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_debug'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -393,13 +401,24 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600 || true'
+                    resetBoard()
                  }
                }
                stage("tests") {
                  steps {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-                    //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+
+                    // test dataman
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman"'
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
                  }
@@ -412,7 +431,6 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -425,8 +443,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
                }
              }
            } // stage test
@@ -447,11 +465,11 @@ pipeline {
                sh 'make px4_fmu-v5_stackcheck'
                sh 'make px4_fmu-v5_stackcheck bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'px4_fmu-v5_stackcheck'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_stackcheck'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -473,6 +491,7 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
@@ -481,6 +500,9 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
+
+                    // test dataman
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman"'
                  }
                }
                stage("status") {
@@ -491,7 +513,6 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -504,8 +525,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
                }
              }
            } // stage test
@@ -526,11 +547,11 @@ pipeline {
                sh 'make px4_fmu-v5_test'
                sh 'make px4_fmu-v5_test bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_test'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -547,6 +568,7 @@ pipeline {
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
@@ -573,8 +595,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
                }
              }
            } // stage test
@@ -595,11 +617,11 @@ pipeline {
                sh 'make nxp_fmuk66-v3_test'
                //sh 'make nxp_fmuk66-v3_test bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'nxp_fmuk66-v3_test'
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -616,6 +638,7 @@ pipeline {
                    //sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_bootloader.elf'
                    // flash board and watch bootup
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    resetBoard()
                  }
                }
                stage("tests") {
@@ -642,8 +665,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
-                    resetBoard()
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
                }
              }
            } // stage test
@@ -669,7 +692,7 @@ void checkoutSCM() {
  retry(3) {
    checkout scm
    sh 'export'
-    sh 'make distclean'
+    sh 'make distclean; git clean -ff -x -d .'
    sh 'git fetch --tags'
    sh 'ccache -z'
  }
@@ -682,18 +705,21 @@ void quickCalibrate() {

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'

+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
+
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
 }
@@ -702,34 +728,44 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'

  // run logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
  // status commands
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
@@ -741,12 +777,12 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  // stop logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
 }

 void resetParameters() {
@@ -756,13 +792,19 @@ void resetParameters() {
 }

 void runTests() {
+
+  // test loading a range of airframes
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+
  resetParameters()

  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
@@ -774,41 +816,38 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'

-  sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
-
-  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'

+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'

-  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'

+  // tests (stop modules first)
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander stop"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink stop-all"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "navigator stop"'
+  sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
+
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'

-  // test rebooting multiple times
-  resetParameters()
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
+  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
 }

 void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'

  // these are for casually inspecting the system, output failure doesn't matter
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
@@ -825,12 +864,15 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf_gps_drift" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -909,28 +951,6 @@ void resetBoard() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true' // reboot to apply
-
-  // check SD card
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
-  // format
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman stop" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "umount /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mkfatfs -F 32 /dev/mmcsd0" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount -t vfat /dev/mmcsd0 /fs/microsd" || true'
-  // check SD card
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
 }
@@ -0,0 +1,7 @@
+FROM gcr.io/oss-fuzz-base/base-builder:v1
+COPY . $SRC/PX4-Autopilot
+RUN apt-get install -y libjpeg8-dev zlib1g-dev
+RUN pip3 install --upgrade pip
+RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
+WORKDIR $SRC/PX4-Autopilot
+COPY ./.clusterfuzzlite/build.sh $SRC/
@@ -0,0 +1,4 @@
+#!/usr/bin/env bash -eu
+
+PX4_FUZZ=1 make px4_sitl
+cp build/px4_sitl_default/bin/px4 $OUT/px4
@@ -0,0 +1 @@
+language: c++
@@ -1,32 +1,34 @@
 ---
-name: Bug report
+name: 🐛 Bug report
 about: Create a report to help us improve
+labels: bug-report

 ---

-**Describe the bug**
+## Describe the bug
 A clear and concise description of the bug.

-**To Reproduce**
+## To Reproduce
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-**Expected behavior**
+## Expected behavior
 A clear and concise description of what you expected to happen.

-**Log Files and Screenshots**
+## Log Files and Screenshots
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).
+- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
+- Share the link to the log (Copy and paste the URL of the log)

 Add screenshots to help explain your problem.

-**Drone (please complete the following information):**
+## Drone (please complete the following information):
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-**Additional context**
+## Additional context
 Add any other context about the problem here.
@@ -1,19 +1,20 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
+labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-**Describe problem solved by the proposed feature**
+## Describe problem solved by the proposed feature
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-**Describe your preferred solution**
+## Describe your preferred solution
 A clear and concise description of what you want to happen.

-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.

-**Additional context**
+## Additional context
 Add any other context or screenshots for the feature request here.
@@ -1,10 +1,13 @@
 ---
 name: ⛔ Support Question
-about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.
+about: See http://discuss.px4.io/ for questions about using PX4.

 ---

-We use GitHub issues only to discuss PX4 bugs and new features. For
-questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).
+## Attention! Please read the note below
+
+We use GitHub issues only to discuss PX4 bugs and new features.
+
+**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**

 Thanks!
@@ -1,9 +1,11 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/Devguide for documentation issues
+about: See https://github.com/PX4/px4_user_guide for documentation issues

 ---

-PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).
+## Attention! Please read the note below
+
+**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**

 Thanks!
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-**Describe problem solved by this pull request**
-A clear and concise description of the problem this proposed change will solve.
+## Describe problem solved by this pull request
+A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
 E.g. For this use case I ran into...

-**Describe your solution**
+## Describe your solution
 A clear and concise description of what you have implemented.

-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.

-**Test data / coverage**
+## Test data / coverage
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-**Additional context**
+## Additional context
 Add any other related context or media.
@@ -0,0 +1,34 @@
+name: ClusterFuzzLite batch fuzzing
+on:
+  schedule:
+    - cron: '0 6 * * *'  # UTC 6am every day.
+permissions: read-all
+jobs:
+  BatchFuzzing:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        sanitizer:
+        - address
+        - undefined
+        - memory
+    steps:
+    - name: Build Fuzzers (${{ matrix.sanitizer }})
+      id: build
+      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
+      with:
+        sanitizer: ${{ matrix.sanitizer }}
+    - name: Run Fuzzers (${{ matrix.sanitizer }})
+      id: run
+      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        fuzz-seconds: 1800 # 30 mins
+        mode: 'batch'
+        sanitizer: ${{ matrix.sanitizer }}
+        # Optional but recommended: For storing certain artifacts from fuzzing.
+        # See later section on "Git repo for storage".
+        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
+        # storage-repo-branch: main   # Optional. Defaults to "main"
+        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".
@@ -20,6 +20,7 @@ jobs:
          ark_can-flow,
          ark_can-gps,
          ark_can-rtk-gps,
+          ark_cannode,
          atl_mantis-edu,
          av_x-v1,
          bitcraze_crazyflie,
@@ -29,11 +30,16 @@ jobs:
          cuav_x7pro,
          cubepilot_cubeorange,
          cubepilot_cubeyellow,
+          diatone_mamba-f405-mk2,
          freefly_can-rtk-gps,
          holybro_can-gps-v1,
          holybro_durandal-v1,
          holybro_kakutef7,
+          holybro_kakuteh7,
          holybro_pix32v5,
+          matek_gnss-m9n-f4,
+          matek_h743,
+          matek_h743-mini,
          matek_h743-slim,
          modalai_fc-v1,
          modalai_fc-v2,
@@ -49,15 +55,17 @@ jobs:
          nxp_fmurt1062-v1,
          nxp_ucans32k146,
          omnibus_f4sd,
-          raspberrypi_pico,
          px4_fmu-v2,
          px4_fmu-v3,
          px4_fmu-v4,
          px4_fmu-v4pro,
          px4_fmu-v5,
          px4_fmu-v5x,
+          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
+          raspberrypi_pico,
+          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
          ]
@@ -35,11 +35,11 @@ jobs:

    - name: parameter & events metadata
      run: |
-        make ${{matrix.target}} ver_gen events_json
+        make ${{matrix.target}} ver_gen events_json actuators_json
        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
        cd build/${{ matrix.target }}
        mkdir _metadata || true
-        cp parameters.* events/*.xz _metadata
+        cp parameters.* events/*.xz actuators.json* _metadata

    - uses: jakejarvis/s3-sync-action@master
      with:
@@ -15,10 +15,10 @@ jobs:
      fail-fast: false
      matrix:
        config:
-          - {latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo",   model: "iris"          } # Alaska
-          - {latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer", model: "standard_vtol" } # Australia
-          - {latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo",   model: "tailsitter"    } # Florida
-          - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",         model: "standard_vtol" } # Zurich
+          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
+          - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
+          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
+          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich

    container:
      image: px4io/px4-dev-simulation-focal:2021-09-08
@@ -29,9 +29,9 @@ jobs:
        token: ${{ secrets.ACCESS_TOKEN }}

    - name: Download MAVSDK
-      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
    - name: Install MAVSDK
-      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"

    - name: Prepare ccache timestamp
      id: ccache_cache_timestamp
@@ -96,7 +96,7 @@ jobs:
        PX4_HOME_LON: ${{matrix.config.longitude}}
        PX4_HOME_ALT: ${{matrix.config.altitude}}
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json
+      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
      timeout-minutes: 45

    - name: Look at core files
@@ -105,8 +105,4 @@ src/lib/version/build_git_version.h
 src/modules/simulator/simulator_config.h
 src/systemcmds/topic_listener/listener_generated.cpp

-# SITL
-dataman
-eeprom/
-
 !src/drivers/distance_sensor/broadcom/afbrs50/Lib/*
@@ -36,20 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/uavcan_v1/libcanard"]
-	path = src/drivers/uavcan_v1/libcanard
-	url = https://github.com/UAVCAN/libcanard.git
-[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
-	path = src/drivers/uavcan_v1/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types.git
-[submodule "src/drivers/uavcannode_gps_demo/public_regulated_data_types"]
-	path = src/drivers/uavcannode_gps_demo/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types.git
-[submodule "src/drivers/uavcannode_gps_demo/libcanard"]
-	path = src/drivers/uavcannode_gps_demo/libcanard
-	url = https://github.com/UAVCAN/libcanard.git
-[submodule "src/drivers/uavcan_v1/legacy_data_types"]
-	path = src/drivers/uavcan_v1/legacy_data_types
+[submodule "src/drivers/cyphal/libcanard"]
+	path = src/drivers/cyphal/libcanard
+	url = https://github.com/opencyphal/libcanard.git
+[submodule "src/drivers/cyphal/public_regulated_data_types"]
+	path = src/drivers/cyphal/public_regulated_data_types
+	url = https://github.com/opencyphal/public_regulated_data_types.git
+[submodule "src/drivers/cyphal/legacy_data_types"]
+	path = src/drivers/cyphal/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -70,3 +64,6 @@
 	path = src/lib/crypto/libtommath
 	url = https://github.com/PX4/libtommath.git
 	branch = px4
+[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
+	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
+	url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git
@@ -9,3 +9,5 @@ launch.json
 ipch/

 browse.vc.db*
+
+*.log
@@ -61,6 +61,11 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: px4_fmu-v5_default
+    px4_fmu-v5_debug:
+      short: px4_fmu-v5_debug
+      buildType: MinSizeRel
+      settings:
+        CONFIG: px4_fmu-v5_debug
    px4_fmu-v5x_default:
      short: px4_fmu-v5x
      buildType: MinSizeRel
@@ -116,6 +121,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-rtk-gps_canbootloader
+    ark_cannode_default:
+      short: ark_cannode_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_cannode_default
+    ark_cannode_canbootloader:
+      short: ark_cannode_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_cannode_canbootloader
    atl_mantis-edu_default:
      short: atl_mantis-edu
      buildType: MinSizeRel
@@ -191,6 +206,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: matek_h743-slim_default
+    matek_gnss-m9n-f4_canbootloader:
+      short: matek_gnss-m9n-f4_canbootloader
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_m9nf4can_canbootloader
+    matek_gnss-m9n-f4_default:
+      short: matek_gnss-m9n-f4_default
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_gnss-m9n-f4_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -99,7 +99,7 @@
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.2 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.9 FATAL_ERROR)

 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -125,6 +125,11 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 FULL_DOCS "List of all PX4 module libraries"
                 )

+define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
+                 BRIEF_DOCS "PX4 kernel side module libs"
+                 FULL_DOCS "List of all PX4 kernel module libraries"
+                 )
+
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
@@ -142,6 +147,7 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")

 include(px4_add_module)
 set(config_module_list)
+set(config_kernel_list)

 # Find Python
 # If using catkin, Python 2 is found since it points
@@ -228,6 +234,14 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)

+# Check if LTO option and check if toolchain supports it
+if(LTO)
+    include(CheckIPOSupported)
+    check_ipo_supported()
+    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
+    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
+endif()
+
 set(package-contact "px4users@googlegroups.com")

 set(CMAKE_CXX_STANDARD 14)
@@ -406,6 +420,7 @@ endif()
 # subdirectories
 #
 add_library(parameters_interface INTERFACE)
+add_library(kernel_parameters_interface INTERFACE)

 include(px4_add_library)
 add_subdirectory(src/lib EXCLUDE_FROM_ALL)
@@ -423,10 +438,18 @@ endforeach()

 # add events lib after modules and libs as it needs to know all source files (PX4_SRC_FILES)
 add_subdirectory(src/lib/events EXCLUDE_FROM_ALL)
+# metadata needs PX4_MODULE_CONFIG_FILES
+add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)

 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
+
+if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
+target_link_libraries(parameters_interface INTERFACE usr_parameters)
+target_link_libraries(kernel_parameters_interface INTERFACE parameters)
+else()
 target_link_libraries(parameters_interface INTERFACE parameters)
+endif()

 # firmware added last to generate the builtin for included modules
 add_subdirectory(platforms/${PX4_PLATFORM})
@@ -88,7 +88,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make airframe_metadata'
            dir('build/px4_sitl_default/docs') {
@@ -98,7 +98,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -108,7 +108,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make parameters_metadata'
            dir('build/px4_sitl_default/docs') {
@@ -118,7 +118,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -128,7 +128,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make module_documentation'
            dir('build/px4_sitl_default/docs') {
@@ -138,7 +138,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -156,7 +156,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -170,7 +170,7 @@ pipeline {
          }
          steps {
            sh 'export'
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make uorb_graphs'
            dir('Tools/uorb_graph') {
@@ -180,7 +180,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -261,7 +261,7 @@ pipeline {
          steps {
            sh('export')
            sh('git fetch --all --tags')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
            sh('make px4_sitl_rtps')
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/micrortps_agent.git -b ${BRANCH_NAME}")
@@ -290,7 +290,7 @@ pipeline {
          }
          steps {
            sh('export')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
              // 'master' branch
@@ -319,7 +319,7 @@ pipeline {
          }
          steps {
            sh('export')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
              // deploy uORB RTPS ID map
@@ -51,6 +51,13 @@ menu "Toolchain"
        string "Architecture"
        default ""

+    config BOARD_LTO
+        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
+        default n
+        help
+            Enables LTO flag in linker
+            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
+
    config BOARD_FULL_OPTIMIZATION
        bool "Full optmization (O3)"
        default n
@@ -114,14 +121,14 @@ config BOARD_ETHERNET
        flag to indicate that ethernet is enabled

 config BOARD_CRYPTO
-    string "Crypto"
+    bool "Crypto support"
    help
-        Crypto implementation selection
+        Enable PX4 Crypto Support. Select the implementation under drivers

-config BOARD_KEYSTORE
-    string "Keystore"
+config BOARD_PROTECTED
+    bool "Memory protection"
    help
-        Keystore implememntation selection
+        Enable memory protection via MPU/MMU

 menu "Serial ports"

@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2012 - 2021, PX4 Development Team
+Copyright (c) 2012 - 2022, PX4 Development Team
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -158,6 +158,11 @@ else
 		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif

+	# Fuzz Testing
+	ifdef PX4_FUZZ
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
+	endif
+
 endif

 # Pick up specific Python path if set
@@ -320,12 +325,13 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
+	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -482,7 +488,9 @@ shellcheck_all:
 	@make px4_fmu-v5_default shellcheck

 validate_module_configs:
-	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f -not -path "$(SRC_DIR)/src/lib/mixer_module/*" -print0 | xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
+	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
+	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" -not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
+	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml

 # Cleanup
 # --------------------------------------------------------------------
@@ -32,3 +32,4 @@
 ############################################################################

 add_subdirectory(init.d)
+add_subdirectory(mixers)
@@ -33,4 +33,5 @@

 px4_add_romfs_files(
 	rcS
+	rc.output_defaults
 )
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# UGV default parameters.
+#
+# NOTE: Script variables are declared/initialized/unset in the rcS script.
+#
+
+#
+# Enable servo output on pins 3 and 4 (steering and thrust)
+# but also include 1+2 as they form together one output group
+# and need to be set together.
+#
+set PWM_OUT 12
+
+#
+# PWM Hz - 50 Hz is the normal rate in RC cars, higher rates
+# may damage analog servos.
+#
+set PWM_MAIN_RATE 50
+
+#
+# This is the gimbal pass mixer.
+#
+set MIXER_AUX pass
+set PWM_AUX_OUT 12
+
+param set-default PWM_MAIN_DISARM 1500
+param set-default PWM_MAIN_MAX 2000
+param set-default PWM_MAIN_MIN 1000
+
+# Set mixer
+set MIXER IO_pass_ucan
@@ -65,8 +65,8 @@ unset BOARD_RC_DEFAULTS
 #
 # Start system state indicator.
 #
-rgbled start -X -q
-rgbled_ncp5623c start -X -q
+#rgbled start -X -q
+#rgbled_ncp5623c start -X -q

 #
 # board sensors: rc.sensors
@@ -86,10 +86,10 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial

 # Check for flow sensor
-if param compare SENS_EN_PX4FLOW 1
-then
-	px4flow start -X
-fi
+#if param compare SENS_EN_PX4FLOW 1
+#then
+#	px4flow start -X &
+#fi

-uavcannode start
+#uavcannode start
 unset R
@@ -31,6 +31,6 @@
 #
 ############################################################################

-add_library(output_limit output_limit.cpp)
-target_link_libraries(output_limit PRIVATE prebuild_targets)
-
+px4_add_romfs_files(
+	IO_pass_ucan.main.mix
+)
@@ -0,0 +1,12 @@
+Passthrough mixer for PX4IO
+============================
+
+This file defines passthrough mixers suitable for testing.
+
+Channel group 0, channels 0-7 are passed directly through to the outputs.
+
+M: 1
+S: 0 0  10000  10000      0 -10000  10000
+
+M: 1
+S: 0 1  10000  10000      0 -10000  10000
@@ -11,40 +11,22 @@

 param set-default SYS_CTRL_ALLOC 1

-param set-default MPC_USE_HTE 0
-
-param set-default VM_MASS 1.5
-param set-default VM_INERTIA_XX 0.03
-param set-default VM_INERTIA_YY 0.03
-param set-default VM_INERTIA_ZZ 0.05

 param set-default CA_AIRFRAME 0
-param set-default CA_METHOD 1
-param set-default CA_ACT0_MIN 0.0
-param set-default CA_ACT1_MIN 0.0
-param set-default CA_ACT2_MIN 0.0
-param set-default CA_ACT3_MIN 0.0
-param set-default CA_ACT0_MAX 1.0
-param set-default CA_ACT1_MAX 1.0
-param set-default CA_ACT2_MAX 1.0
-param set-default CA_ACT3_MAX 1.0

-param set-default CA_MC_R0_PX 0.1515
-param set-default CA_MC_R0_PY 0.245
-param set-default CA_MC_R0_CT 6.5
-param set-default CA_MC_R0_KM 0.05
-param set-default CA_MC_R1_PX -0.1515
-param set-default CA_MC_R1_PY -0.1875
-param set-default CA_MC_R1_CT 6.5
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.1515
-param set-default CA_MC_R2_PY -0.245
-param set-default CA_MC_R2_CT 6.5
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.1515
-param set-default CA_MC_R3_PY 0.1875
-param set-default CA_MC_R3_CT 6.5
-param set-default CA_MC_R3_KM -0.05
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -10,6 +10,7 @@
 # enable fusion of landing target velocity
 param set-default LTEST_MODE 1
 param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2

 # Start up Landing Target Estimator module
 landing_target_estimator start
@@ -5,13 +5,8 @@

 . ${R}etc/init.d/rc.uuv_defaults

-#Set data link loss failsafe mode (0: disabled)
-
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-set MAV_TYPE 12
-param set MAV_TYPE ${MAV_TYPE}
-
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom
@@ -5,13 +5,8 @@

 . ${R}etc/init.d/rc.uuv_defaults

-#Set data link loss failsafe mode (0: disabled)
-
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-set MAV_TYPE 12
-param set MAV_TYPE ${MAV_TYPE}
-
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom
@@ -5,11 +5,65 @@

 . ${R}etc/init.d/rc.uuv_defaults

-#Set data link loss failsafe mode (0: disabled)
-
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-set PWM_OUT 12345678
-set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix
-set MIXER custom
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 7
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 255
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+param set-default PWM_MAIN_FUNC7 107
+param set-default PWM_MAIN_FUNC8 108
+
+set MIXER skip
@@ -25,16 +25,15 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3

+param set-default FW_SPOILERS_LND 0.4
+
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25

-param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_HRATE_FF 0.5
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
-param set-default FW_T_TAS_TC 2

 param set-default FW_W_EN 1

@@ -46,5 +45,32 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+#param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom
@@ -44,6 +44,8 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

+param set-default FW_USE_NPFG 1
+
 param set-default RWTO_TKOFF 1

 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
@@ -7,6 +7,47 @@

 . ${R}etc/init.d/rc.vtol_defaults

+# TODO: Enable motor failure detection when the
+# VTOL no longer reports 0A for all ESCs in SITL
+param set-default FD_ACT_EN 0
+param set-default FD_ACT_MOT_TOUT 500
+
+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 2
+
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
@@ -19,12 +60,9 @@ param set-default FW_RR_P 0.3
 param set-default FW_THR_CRUISE 0.25
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
-param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_HRATE_FF 0.5
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
-param set-default FW_T_TAS_TC 2

 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6
@@ -38,7 +76,6 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80

 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -47,7 +84,5 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2

-set MAV_TYPE 22
-
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom
@@ -7,14 +7,50 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 20
+
+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 4
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 2
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y 0.5
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 0
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_REV 96 # invert both elevons
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_I 0.2
-param set-default FW_PR_P 0.3
+param set-default FW_PR_P 0.2
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_P 0.3
+param set-default FW_RR_P 0.2
 param set-default FW_THR_CRUISE 0.33
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
@@ -34,15 +70,14 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80

+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.5
 param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_F_TRANS_THR 0.7
 param set-default VT_TYPE 0

 param set-default WV_EN 0

-set MAV_TYPE 20
-
 set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
 set MIXER custom
@@ -7,6 +7,52 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 21
+
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR2_TILT 3
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_TL0_CT 0
+param set-default CA_SV_TL1_CT 0
+param set-default CA_SV_TL2_CT 0
+param set-default CA_SV_TL3_CT 0
+param set-default CA_SV_TL_COUNT 4
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 204
+param set-default PWM_MAIN_FUNC6 205
+param set-default PWM_MAIN_FUNC7 206
+param set-default PWM_MAIN_FUNC8 207
+param set-default PWM_MAIN_FUNC9 201
+param set-default PWM_MAIN_FUNC10 202
+param set-default PWM_MAIN_FUNC11 203
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
@@ -19,12 +65,9 @@ param set-default FW_RR_P 0.3
 param set-default FW_THR_CRUISE 0.38
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
-param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_HRATE_FF 0.5
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
-param set-default FW_T_TAS_TC 2

 param set-default MC_YAW_P 1.6

@@ -37,7 +80,6 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80

 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
@@ -45,7 +87,5 @@ param set-default VT_MOT_ID 1234
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1

-set MAV_TYPE 21
-
 set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
 set MIXER custom
@@ -38,7 +38,6 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80

 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -51,7 +50,5 @@ param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10

-set MAV_TYPE 22
-
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom
@@ -28,6 +28,13 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-set MAV_TYPE 10
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 5

-set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
+param set-default CA_R_REV 1
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 201
+param set-default PWM_MAIN_FUNC6 101
+param set-default PWM_MAIN_FUNC7 101
+
+set MIXER_FILE skip
@@ -28,6 +28,13 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-set MAV_TYPE 10
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 6

-set MIXER_FILE etc/mixers-sitl/rover_diff_sitl.main.mix
+param set-default CA_R_REV 3
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 101
+param set-default PWM_MAIN_FUNC6 102
+param set-default PWM_MAIN_FUNC7 102
+
+set MIXER_FILE skip
@@ -10,6 +10,8 @@

 . ${R}etc/init.d/rc.rover_defaults

+param set-default MAV_TYPE 10
+
 param set-default GND_L1_DIST 5
 param set-default GND_SP_CTRL_MODE 1
 param set-default GND_SPEED_D 3
@@ -33,6 +35,4 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0

-set MAV_TYPE 10
-
 set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
@@ -28,6 +28,23 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-set MAV_TYPE 11
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 9

-set MIXER_FILE etc/mixers-sitl/boat_sitl.main.mix
+param set-default CA_ROTOR_COUNT 2
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX -2
+param set-default CA_ROTOR0_PY -1
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX -2
+param set-default CA_ROTOR1_PY 1
+param set-default CA_R_REV 3
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+
+set MIXER skip
@@ -11,5 +11,31 @@

 . ${R}etc/init.d/rc.airship_defaults

-set MIXER cloudship
-set PWM_OUT 1234
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 9
+
+param set-default CA_ROTOR_COUNT 3
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000
+
+param set-default CA_SV_CS_COUNT 1
+param set-default CA_SV_CS0_TRQ_P 1.0000
+
+param set-default CA_R_REV 7
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 201
+param set-default PWM_MAIN_FUNC4 103
+
+set MIXER skip
@@ -9,6 +9,8 @@

 . ${R}etc/init.d/rc.mc_defaults

+param set-default MAV_TYPE 13
+
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
@@ -24,6 +26,4 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2

-set MAV_TYPE 13
-
 set MIXER hexa_x
@@ -7,6 +7,8 @@

 . ${R}etc/init.d/rc.mc_defaults

+param set-default MAV_TYPE 13
+
 param set-default MC_PITCHRATE_P 0.0800
 param set-default MC_PITCHRATE_I 0.0400
 param set-default MC_PITCHRATE_D 0.0010
@@ -26,6 +28,4 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2

-set MAV_TYPE 13
-
 set MIXER hexa_x
@@ -7,6 +7,8 @@

 . ${R}etc/init.d/rc.mc_defaults

+param set-default MAV_TYPE 13
+
 param set-default SYS_CTRL_ALLOC 1

 param set-default MC_PITCHRATE_P 0.0800
@@ -29,52 +31,27 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 0
 param set-default MAV_PROTO_VER 2

-param set-default MPC_USE_HTE 0
-
-param set-default VM_MASS 2.66
-param set-default VM_INERTIA_XX 0.06
-param set-default VM_INERTIA_YY 0.06
-param set-default VM_INERTIA_ZZ 0.10
-
 param set-default CA_AIRFRAME 0
-param set-default CA_METHOD 1
-param set-default CA_ACT0_MIN 0.0
-param set-default CA_ACT1_MIN 0.0
-param set-default CA_ACT2_MIN 0.0
-param set-default CA_ACT3_MIN 0.0
-param set-default CA_ACT4_MIN 0.0
-param set-default CA_ACT5_MIN 0.0
-param set-default CA_ACT0_MAX 1.0
-param set-default CA_ACT1_MAX 1.0
-param set-default CA_ACT2_MAX 1.0
-param set-default CA_ACT3_MAX 1.0
-param set-default CA_ACT4_MAX 1.0
-param set-default CA_ACT5_MAX 1.0
+param set-default CA_ROTOR_COUNT 6

-param set-default CA_MC_R0_PX 0.0
-param set-default CA_MC_R0_PY 1.0
-param set-default CA_MC_R0_CT 9.5
-param set-default CA_MC_R0_KM -0.05
-param set-default CA_MC_R1_PX 0.0
-param set-default CA_MC_R1_PY -1.0
-param set-default CA_MC_R1_CT 9.5
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.866025
-param set-default CA_MC_R2_PY -0.5
-param set-default CA_MC_R2_CT 9.5
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.866025
-param set-default CA_MC_R3_PY 0.5
-param set-default CA_MC_R3_CT 9.5
-param set-default CA_MC_R3_KM 0.05
-param set-default CA_MC_R4_PX 0.866025
-param set-default CA_MC_R4_PY 0.5
-param set-default CA_MC_R4_CT 9.5
-param set-default CA_MC_R4_KM 0.05
-param set-default CA_MC_R5_PX -0.866025
-param set-default CA_MC_R5_PY -0.5
-param set-default CA_MC_R5_CT 9.5
-param set-default CA_MC_R5_KM -0.05
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.866025
+param set-default CA_ROTOR2_PY -0.5
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.866025
+param set-default CA_ROTOR3_PY 0.5
+param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR4_PX 0.866025
+param set-default CA_ROTOR4_PY 0.5
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR5_PX -0.866025
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR5_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -83,7 +60,5 @@ param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 105
 param set-default PWM_MAIN_FUNC6 106

-set MAV_TYPE 13
-
 set MIXER skip
 set MIXER_AUX none
@@ -1,6 +1,4 @@

-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -10,7 +10,7 @@ fi

 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
 fi

 publisher_rules_file="orb_publisher.rules"
@@ -21,6 +21,7 @@ ignore_others: false
 EOF

 param set SDLOG_DIRS_MAX 7
+param set SDLOG_PROFILE 3

 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams
@@ -1,5 +1,7 @@
 #!/bin/sh

+set -e
+
 # PX4 commands need the 'px4-' prefix in bash.
 # (px4-alias.sh is expected to be in the PATH)
 # shellcheck disable=SC1091
@@ -22,7 +24,6 @@ fi

 # initialize script variables
 set IO_PRESENT                  no
-set MAV_TYPE                    none
 set MIXER                       none
 set MIXER_AUX                   none
 set MIXER_FILE                  none
@@ -94,10 +95,9 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
+	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
-
-	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
-	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
@@ -195,14 +195,6 @@ fi

 . "$autostart_file"

-#
-# If autoconfig parameter was set, reset it and save parameters.
-#
-if [ $AUTOCNF = yes ]
-then
-	param set SYS_AUTOCONFIG 0
-fi
-
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250

@@ -222,6 +214,13 @@ rc_update start
 manual_control start
 sensors start
 commander start
+
+# Configure vehicle type specific parameters.
+# Note: rc.vehicle_setup is the entry point for rc.interface,
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+#
+. ${R}etc/init.d/rc.vehicle_setup
+
 navigator start

 # Try to start the micrortps_client with UDP transport if module exists
@@ -232,7 +231,7 @@ fi

 if param greater -s MNT_MODE_IN -1
 then
-	vmount start
+	gimbal start
 fi

 if param greater -s TRIG_MODE 0
@@ -251,12 +250,6 @@ then
 	gyro_calibration start
 fi

-# Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for rc.interface,
-#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-#
-. ${R}etc/init.d/rc.vehicle_setup
-
 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink

@@ -55,4 +55,5 @@ px4_add_romfs_files(
 	rc.vehicle_setup
 	rc.vtol_apps
 	rc.vtol_defaults
+	rc.output_defaults
 )
@@ -39,8 +39,30 @@ param set-default FW_RR_P 0.3

 param set-default RWTO_TKOFF 1

+param set-default CA_AIRFRAME 1
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TRQ_R 0.5
+param set-default CA_SV_CS0_TYPE 2
+param set-default CA_SV_CS1_TRQ_P 1.0
+param set-default CA_SV_CS1_TYPE 3
+param set-default CA_SV_CS2_TRQ_Y 1.0
+param set-default CA_SV_CS2_TYPE 4
+param set-default CA_SV_CS3_TYPE 10
+
+param set-default HIL_ACT_REV 2
+param set-default HIL_ACT_FUNC1 201
+param set-default HIL_ACT_FUNC2 202
+param set-default HIL_ACT_FUNC3 203
+param set-default HIL_ACT_FUNC4 101
+param set-default HIL_ACT_FUNC5 204
+param set-default HIL_ACT_FUNC6 400
+
 param set SYS_HITL 1

+param set UAVCAN_ENABLE 0
+
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -35,6 +35,6 @@ param set-default MC_YAWRATE_P 0.25
 param set-default MC_YAWRATE_I 0.25

 param set-default BAT1_V_DIV 12.27559
-param set-default BAT1_A_PER_V 15.39103
+param set-default BAT1_A_PER_V 15.391030303103

 set MIXER quad_w
@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone QU4D
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 feed-through of RC AUX1 channel
-# @output MAIN6 feed-through of RC AUX2 channel
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 4
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.13
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.004
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.19
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.004
-param set-default MC_YAW_P 4
-set MIXER quad_w
@@ -15,6 +15,25 @@ set MIXER quad_x

 param set SYS_HITL 1

+param set UAVCAN_ENABLE 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104
+
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -49,7 +49,6 @@ param set-default MPC_Z_VEL_MAX_DN 1.5

 param set-default NAV_ACC_RAD 5
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 80

 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
@@ -61,9 +60,42 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2

+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104
+param set-default HIL_ACT_FUNC5 105
+param set-default HIL_ACT_FUNC6 201
+param set-default HIL_ACT_FUNC7 202
+param set-default HIL_ACT_FUNC8 203
+

 param set SYS_HITL 1

+param set UAVCAN_ENABLE 0
+
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -73,7 +105,7 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027

-set MAV_TYPE 22
+param set-default MAV_TYPE 22

 set MIXER standard_vtol_hitl

@@ -15,6 +15,25 @@
 set MIXER quad_x
 set PWM_OUT 1234

+param set UAVCAN_ENABLE 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2

@@ -15,6 +15,28 @@
 set MIXER AERT
 set PWM_OUT 1234

+param set UAVCAN_ENABLE 0
+
+param set-default CA_AIRFRAME 1
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TRQ_R 0.5
+param set-default CA_SV_CS0_TYPE 2
+param set-default CA_SV_CS1_TRQ_P 1.0
+param set-default CA_SV_CS1_TYPE 3
+param set-default CA_SV_CS2_TRQ_Y 1.0
+param set-default CA_SV_CS2_TYPE 4
+param set-default CA_SV_CS3_TYPE 10
+
+param set-default HIL_ACT_REV 2
+param set-default HIL_ACT_FUNC1 201
+param set-default HIL_ACT_FUNC2 202
+param set-default HIL_ACT_FUNC3 203
+param set-default HIL_ACT_FUNC4 101
+param set-default HIL_ACT_FUNC5 204
+param set-default HIL_ACT_FUNC6 400
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2

@@ -38,3 +60,4 @@ param set SIH_IXZ 0.00046
 param set SIH_KDV 0.2

 param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
+param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
@@ -0,0 +1,81 @@
+#!/bin/sh
+#
+# @name SIH Tailsitter Duo
+#
+# @type Simulation
+# @class VTOL
+#
+# @output MAIN1 motor right
+# @output MAIN2 motor left
+# @output MAIN5 elevon right
+# @output MAIN6 elevon left
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set UAVCAN_ENABLE 0
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_MOT_COUNT 2
+param set-default VT_TYPE 0
+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.3
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default CA_AIRFRAME 4
+param set-default CA_ROTOR_COUNT 2
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TRQ_P 0.3
+param set-default CA_SV_CS0_TRQ_Y 0.3
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS1_TRQ_P 0.3
+param set-default CA_SV_CS1_TRQ_Y -0.3
+param set-default CA_SV_CS1_TYPE 6
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC5 202
+param set-default HIL_ACT_FUNC6 201
+param set-default HIL_ACT_REV 32
+
+param set-default MAV_TYPE 19
+
+set MIXER vtol_tailsitter_duo_sat
+
+set PWM_OUT 1234
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+param set-default SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0.0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.145
+
+# sih as tailsitter
+param set SIH_VEHICLE_TYPE 2
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone MAVRIK
-#
-# @type Octo Coax Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 motor 5
-# @output MAIN6 motor 6
-# @output MAIN7 motor 7
-# @output MAIN8 motor 8
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default MC_PITCH_P 4
-param set-default MC_PITCHRATE_P 0.24
-param set-default MC_PITCHRATE_I 0.09
-param set-default MC_PITCHRATE_D 0.013
-param set-default MC_PITCHRATE_MAX 180
-
-param set-default MC_ROLL_P 4
-param set-default MC_ROLLRATE_P 0.16
-param set-default MC_ROLLRATE_I 0.07
-param set-default MC_ROLLRATE_D 0.009
-param set-default MC_ROLLRATE_MAX 180
-
-param set-default MC_YAW_P 3
-
-param set-default MPC_HOLD_MAX_XY 0.25
-param set-default MPC_THR_MIN 0.15
-param set-default MPC_Z_VEL_MAX_DN 2
-
-param set-default BAT1_N_CELLS 4
-
-set MIXER octo_cox_w
-
-set PWM_OUT 12345678
@@ -24,13 +24,38 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4

 param set-default PWM_AUX_DIS5 950

 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
-set MAV_TYPE 22
+
+param set-default MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -19,7 +19,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default MAV_TYPE 19

 param set-default MC_ROLL_P 6
@@ -38,7 +37,6 @@ param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_ID 12
 param set-default VT_TYPE 0
-set MAV_TYPE 19

 set MIXER vtol_tailsitter_duo

@@ -23,6 +23,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 21

 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.19
@@ -45,7 +46,6 @@ param set-default VT_TILT_TRANS 0.5
 param set-default VT_TILT_FW 0.9
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
-set MAV_TYPE 21

 set MIXER firefly6
 set MIXER_AUX firefly6
@@ -13,13 +13,33 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 20
+
+param set-default CA_AIRFRAME 4
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y 0.5
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6

 param set-default PWM_MAIN_MAX 2000

 param set-default VT_MOT_ID 1234
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
-set MAV_TYPE 20

 set MIXER quad_x_vtol

@@ -7,8 +7,8 @@
 #
 # @output MAIN1 motor 1
 # @output MAIN2 motor 2
-# @output MAIN3 motor 4
-# @output MAIN4 motor 5
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
 # @output MAIN5 elevon left
 # @output MAIN6 elevon right
 # @output MAIN7 canard surface
@@ -22,13 +22,13 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 20
+
 param set-default PWM_MAIN_MAX 2000

 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0

-set MAV_TYPE 20
-
 set MIXER quad_+_vtol

 set PWM_OUT 1234
@@ -52,7 +52,6 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
-set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -41,7 +41,6 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
-set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_delta
@@ -33,7 +33,6 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
-set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAVVT
@@ -46,7 +46,6 @@ param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2
-set MAV_TYPE 22

 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
@@ -77,8 +77,6 @@ param set-default VT_TRANS_MIN_TM 5
 param set-default VT_TRANS_TIMEOUT    30
 param set-default VT_TYPE 2

-set MAV_TYPE 22
-
 set MIXER quad_x
 set MIXER_AUX vtol_AAERT

@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# @name CruiseAder Claire
-#
-# @type VTOL Tiltrotor
-# @class VTOL
-#
-# @maintainer Samay Siga <samay_s@icloud.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default PWM_AUX_DISARM 1000
-param set-default PWM_AUX_MAX 2000
-param set-default PWM_AUX_MIN 1000
-param set-default PWM_AUX_RATE 50
-
-param set-default PWM_MAIN_MAX 2000
-
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 13
-param set-default VT_IDLE_PWM_MC 1080
-param set-default VT_TILT_FW 0.9
-param set-default VT_TILT_MC 0.08
-param set-default VT_TILT_TRANS 0.5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 1
-set MAV_TYPE 21
-
-set MIXER claire
-set MIXER_AUX claire
-
-set PWM_OUT 1234
@@ -22,6 +22,8 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 21
+
 param set-default CBRK_AIRSPD_CHK 162128

 param set-default FW_ARSP_MODE 1
@@ -64,8 +66,12 @@ param set-default VT_TRANS_MIN_TM 1.2
 param set-default VT_TRANS_P2_DUR 1.3
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
-set MAV_TYPE 21

 set MIXER vtol_convergence

-set PWM_OUT 1234
+if ! ver hwcmp MATEK_H743
+then
+	set PWM_OUT 1234
+else
+	set PWM_OUT 3456
+fi	
@@ -22,6 +22,8 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 22
+
 param set-default BAT1_CAPACITY 23000
 param set-default BAT1_N_CELLS 4
 param set-default BAT1_R_INTERNAL 0.0025
@@ -64,7 +66,6 @@ param set-default FW_BAT_SCALE_EN 1
 param set-default FW_THR_ALT_SCL 2.7
 param set-default FW_T_RLL2THR 20

-param set-default LNDMC_ALT_MAX 9999
 param set-default LNDMC_XY_VEL_MAX 1
 param set-default LNDMC_Z_VEL_MAX 0.7

@@ -130,12 +131,10 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
-param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

 param set-default COM_RC_OVERRIDE 0
-set MAV_TYPE 22

 set MIXER deltaquad
 set MIXER_AUX pass
@@ -23,6 +23,8 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 22
+
 param set-default BAT1_N_CELLS 6

 param set-default FW_AIRSPD_MAX 30
@@ -94,8 +96,6 @@ param set-default VT_PSHER_RMP_DT 2
 param set-default VT_TRANS_MIN_TM 4
 param set-default VT_TYPE 2

-set MAV_TYPE 22
-
 set MIXER babyshark
 set MIXER_AUX pass

@@ -27,11 +27,37 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 21
+
 param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 24
-set MAV_TYPE 21
+
+param set-default CA_AIRFRAME 3
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_TILT 2
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR3_TILT 4
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_TL_COUNT 4

 set MIXER quad_x
 set MIXER_AUX vtol_TTTTAAER
@@ -31,7 +31,6 @@ param set-default PWM_AUX_DIS5 950
 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 12345678
 param set-default VT_FW_MOT_OFFID 12345678
-set MAV_TYPE 22

 set MIXER octo_cox
 set MIXER_AUX vtol_AAERT
@@ -19,12 +19,26 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default MAV_TYPE 19
+
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0

-param set-default MAV_TYPE 19
-set MAV_TYPE 19
+param set-default CA_AIRFRAME 4
+param set-default CA_ROTOR_COUNT 2
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y 0.5
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6
+
 set MIXER vtol_tailsitter_duo

 set PWM_OUT 1234
@@ -18,4 +18,7 @@

 . ${R}etc/init.d/rc.mc_defaults

+# MAV_TYPE_TRICOPTER 15
+param set-default MAV_TYPE 15
+
 set MIXER tri_y_yaw+
@@ -18,4 +18,7 @@

 . ${R}etc/init.d/rc.mc_defaults

+# MAV_TYPE_TRICOPTER 15
+param set-default MAV_TYPE 15
+
 set MIXER tri_y_yaw-
@@ -17,7 +17,9 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-set MIXER coax
+
+# MAV_TYPE_COAXIAL 3
+param set-default MAV_TYPE 3

 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.05
@@ -36,6 +38,9 @@ param set-default PWM_MAIN_RATE 400

 param set-default RTL_RETURN_ALT 30
 param set-default RTL_DESCEND_ALT 10
+
+set MIXER coax
+
 # This is the gimbal pass mixer
 set MIXER_AUX pass

@@ -20,7 +20,7 @@
 . ${R}etc/init.d/rc.mc_defaults

 # Configure as helicopter (number 4 defined in commander_helper.cpp)
-set MAV_TYPE 4
+param set-default MAV_TYPE 4

 set MIXER blade130

@@ -41,5 +41,6 @@ param set-default FW_R_LIM 40
 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
+
 set MIXER TF-G2
 set MIXER_AUX pass
@@ -24,8 +24,5 @@ param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600

-set MAV_TYPE 8
-param set MAV_TYPE ${MAV_TYPE}
-
 set MIXER IO_pass
 set MIXER_AUX pass
@@ -23,6 +23,18 @@

 . ${R}etc/init.d/rc.fw_defaults

+param set-default CA_AIRFRAME 1
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_RATE 50

@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# @name Generic Output
+#
+# @maintainer
+#
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.output_defaults
+
+
+# Provide ESC a constant 1500 us pulse
+param set-default PWM_MAIN_DISARM 1500
+param set-default PWM_MAIN_MAX 2000
+param set-default PWM_MAIN_MIN 1000
+
+# Set mixer
+set MIXER IO_pass
+
+set PWM_OUT 12
@@ -26,7 +26,7 @@
 # @board px4_fmu-v2 exclude
 #

-set VEHICLE_TYPE mc
+. ${R}etc/init.d/rc.mc_defaults

 param set-default NAV_ACC_RAD 2

@@ -39,6 +39,7 @@ param set-default PWM_MAIN_RATE 400

 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
+
 set MIXER dodeca_top_cox
 set MIXER_AUX dodeca_bottom_cox

@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name IO Camflyer
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_TRIM 13
-param set-default FW_R_TC 0.3
-param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.74
-param set-default FW_L1_PERIOD 16
-param set-default FW_LND_ANG 15
-param set-default FW_LND_FLALT 5
-param set-default FW_LND_HVIRT 13
-param set-default FW_LND_TLALT 5
-param set-default FW_THR_LND_MAX 0
-param set-default FW_PR_FF 0.35
-param set-default FW_RR_FF 0.6
-param set-default FW_RR_P 0.04
-
-param set-default PWM_MAIN_DISARM 1000
-
-
-set MIXER fw_generic_wing
-
-# Provide ESC a constant 1000 us pulse while disarmed
-set PWM_OUT 4
@@ -41,9 +41,6 @@ param set-default FW_RR_P 0.04

 param set-default PWM_MAIN_DISARM 1000

-# Configure this as plane.
-set MAV_TYPE 1
-
 # Set mixer.
 set MIXER fw_generic_wing

@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# @name FX-79 Buffalo Flying Wing
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 right aileron
-# @output MAIN2 left aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 30
-param set-default FW_AIRSPD_MIN 13
-
-param set-default NAV_LOITER_RAD 150
-
-set MIXER fw_generic_wing
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name Viper
-#
-# @type Flying Wing
-# @class Plane
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER Viper
@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-# @name Modified Parrot Disco
-#
-# @url
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-####################################
-# Airspeed
-####################################
-param set-default FW_AIRSPD_MAX  27 # = 52 knots
-
-####################################
-# Pitch
-####################################
-
-# Pitch rate feed forward (def = 0.5 %/rad/sec)
-param set-default FW_PR_FF 0.35
-
-####################################
-# Roll
-####################################
-
-# Basic limits (def = 50 deg)
-param set-default FW_R_LIM 40
-
-# Roll rate upper limit (def = 70 deg/s)
-param set-default FW_R_RMAX 50
-
-param set-default PWM_MAIN_DISARM 1000
-
-set MIXER fw_generic_wing.main.mix
-
-# Provide ESC a constant 1000 us pulse
-set PWM_OUT 4
@@ -21,3 +21,16 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F330 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F450 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_YAWRATE_P 0.3
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-# @name S500 with control allocation
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Silvan Fuhrer
-#
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER skip
-set MIXER_AUX none
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default MPC_USE_HTE 0
-
-param set-default VM_MASS 1.5
-param set-default VM_INERTIA_XX 0.03
-param set-default VM_INERTIA_YY 0.03
-param set-default VM_INERTIA_ZZ 0.05
-
-param set-default CA_AIRFRAME 0
-param set-default CA_METHOD 1
-param set-default CA_ACT0_MIN 0.0
-param set-default CA_ACT1_MIN 0.0
-param set-default CA_ACT2_MIN 0.0
-param set-default CA_ACT3_MIN 0.0
-param set-default CA_ACT0_MAX 1.0
-param set-default CA_ACT1_MAX 1.0
-param set-default CA_ACT2_MAX 1.0
-param set-default CA_ACT3_MAX 1.0
-
-param set-default CA_MC_R0_PX 0.177
-param set-default CA_MC_R0_PY 0.177
-param set-default CA_MC_R0_CT 6.5
-param set-default CA_MC_R0_KM 0.05
-param set-default CA_MC_R1_PX -0.177
-param set-default CA_MC_R1_PY -0.177
-param set-default CA_MC_R1_CT 6.5
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.177
-param set-default CA_MC_R2_PY -0.177
-param set-default CA_MC_R2_CT 6.5
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.177
-param set-default CA_MC_R3_PY 0.177
-param set-default CA_MC_R3_CT 6.5
-param set-default CA_MC_R3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Holybro X500 V2
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Farhang Naderi <farhang.nba@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default IMU_GYRO_CUTOFF 30
+
+param set-default MC_ROLLRATE_P 0.14
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_ROLLRATE_I 0.3
+param set-default MC_PITCHRATE_I 0.3
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCHRATE_D 0.004
@@ -24,8 +24,6 @@

 set MIXER quad_s250aq

-set MAV_TYPE 2
-
 param set-default ATT_BIAS_MAX 0

 param set-default CBRK_IO_SAFETY 22027
@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# @name DJI Matrice 100
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer James Goppert <james.goppert@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 6
-
-param set-default MC_ROLLRATE_P 0.05
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_PITCHRATE_P 0.05
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.001
-
-param set-default MC_YAWRATE_I 0
-
-param set-default PWM_MAIN_MIN 1200
@@ -16,8 +16,10 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER none
-set MIXER_AUX none
+# We set the mixer and ESC manually.
+set MIXER skip
+set MIXER_AUX skip
+set MIXER_FILE ""

 # Battery settings
 param set-default BAT_CRIT_THR 0.20
@@ -33,17 +35,18 @@ param set-default CBRK_SUPPLY_CHK 894281

 param set-default COM_DISARM_LAND 0.1
 param set-default COM_DISARM_PRFLT 3
-param set-default COM_FLTMODE1 -1
+param set-default COM_DL_LOSS_T 10
+param set-default COM_FLTMODE1  2
 param set-default COM_FLTMODE2 -1
 param set-default COM_FLTMODE3 -1
-param set-default COM_FLTMODE4  2
+param set-default COM_FLTMODE4 -1
 param set-default COM_FLTMODE5 -1
-param set-default COM_FLTMODE6  6
+param set-default COM_FLTMODE6  1
 param set-default COM_RC_LOSS_T 3


 # ekf2
-param set-default EKF2_AID_MASK 35
+param set-default EKF2_AID_MASK 33
 param set-default EKF2_BARO_DELAY 0
 param set-default EKF2_BARO_NOISE 2.0

@@ -68,6 +71,9 @@ param set-default EKF2_OF_GATE 2.0
 param set-default EKF2_OF_POS_X -0.035
 param set-default EKF2_OF_POS_Y 0.0
 param set-default EKF2_OF_POS_Z 0.033
+param set-default EKF2_OF_MIN_RNG 0.01
+param set-default EKF2_OF_A_HMAX 7.0
+param set-default EKF2_OF_QMIN 30

 param set-default EKF2_PCOEF_XN -0.3
 param set-default EKF2_PCOEF_XP -0.4
@@ -141,58 +147,33 @@ param set-default MPC_Z_VEL_P 0.27


 # gimbal configuration
-param set-default MNT_MODE_IN 1
-param set-default MNT_MODE_OUT 2
-param set-default MNT_MAN_PITCH 1
-
+param set-default MNT_MODE_IN 0
+param set-default MNT_MODE_OUT 1
+param set-default MNT_MAN_PITCH 2
+param set-default MNT_RC_IN_MODE 1
+param set-default MNT_RATE_PITCH 30

 # RC
 param set-default RC_CHAN_CNT       12

 param set-default RC_MAP_THROTTLE   1
-param set-default RC_MAP_ROLL       2
+param set-default RC_MAP_YAW        2
 param set-default RC_MAP_PITCH      3
-param set-default RC_MAP_YAW        4
-param set-default RC_MAP_FLTMODE    5
-param set-default RC_MAP_AUX1       7
+param set-default RC_MAP_ROLL       4
+param set-default RC_MAP_AUX2       5
+param set-default RC_MAP_AUX3       10
+param set-default RC_MAP_AUX4       8
+param set-default RC_MAP_FLTMODE    6
+param set-default RC_MAP_RETURN_SW  7

-param set-default RC1_DZ            10
-param set-default RC1_MAX           3413
-param set-default RC1_MIN           683
-param set-default RC1_REV           1
-param set-default RC1_TRIM          683
-param set-default RC2_DZ            10
-param set-default RC2_MAX           3413
-param set-default RC2_MIN           683
-param set-default RC2_REV           -1
-param set-default RC2_TRIM          2048
-param set-default RC3_DZ            10
-param set-default RC3_MAX           3413
-param set-default RC3_MIN           683
-param set-default RC3_REV           1
-param set-default RC3_TRIM          2048
-param set-default RC4_DZ            10
-param set-default RC4_MAX           3413
-param set-default RC4_MIN           683
-param set-default RC4_REV           -1
-param set-default RC4_TRIM          2048
-param set-default RC5_DZ            10
-param set-default RC5_MAX           3414
-param set-default RC5_MIN           2048
-param set-default RC5_REV           1
-param set-default RC5_TRIM          2048
-param set-default RC7_DZ            10
-param set-default RC7_MAX           3413
-param set-default RC7_MIN           683
-param set-default RC7_REV           1
-param set-default RC7_TRIM          2048
+param set-default RC1_TRIM          1000


 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
 param set-default SENS_FLOW_MAXHGT 5.0
-param set-default SENS_FLOW_ROT    4
+param set-default SENS_FLOW_ROT    0

-
-mixer load /dev/tap_esc /etc/mixers/quad_x.main.mix
+# ignore the SD card errors and use normal startup sound
+set STARTUP_TUNE "1"
--- a/Show More
+++ b/Show More