ekf2: stop gps yaw fusion on numerical error

* initial working

* incoperated review

.ci/Jenkinsfile-compile

@@ -46,8 +46,6 @@ pipeline {
                      "ark_cannode_default",
                      "ark_fmu-v6x_bootloader",
                      "ark_fmu-v6x_default",
-                     "ark_fpv_bootloader",
-                     "ark_fpv_default",
                      "ark_pi6x_bootloader",
                      "ark_pi6x_default",
                      "atl_mantis-edu_default",

.devcontainer/devcontainer.json

@@ -15,6 +15,7 @@
 	"extensions": [
 		"chiehyu.vscode-astyle",
 		"dan-c-underwood.arm",
+		"editorconfig.editorconfig",
 		"fredericbonnet.cmake-test-adapter",
 		"github.vscode-pull-request-github",
 		"marus25.cortex-debug",

.editorconfig

@@ -1,7 +1,7 @@
 root = true
 
 [*]
-insert_final_newline = false
+insert_final_newline = true
 
 [{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
 indent_style = tab

.github/workflows/checks.yml

@@ -23,6 +23,7 @@ jobs:
           "shellcheck_all",
           "NO_NINJA_BUILD=1 px4_fmu-v5_default",
           "NO_NINJA_BUILD=1 px4_sitl_default",
+          "px4_sitl_allyes",
           "airframe_metadata",
           "module_documentation",
           "parameters_metadata",

.github/workflows/mavros_mission_tests.yml

@@ -11,6 +11,8 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
+    env:
+      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
     strategy:
       fail-fast: false
       matrix:

.github/workflows/mavros_offboard_tests.yml

@@ -11,6 +11,8 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
+    env:
+      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
     strategy:
       fail-fast: false
       matrix:

.vscode/cmake-variants.yaml

@@ -151,16 +151,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-rtk-gps_canbootloader
-    ark_septentrio_gps_default:
-      short: ark_septentrio_gps_default
+    ark_septentrio-gps_default:
+      short: ark_septentrio-gps_default
       buildType: MinSizeRel
       settings:
-        CONFIG: ark_septentrio_gps_default
-    ark_septentrio_gps_canbootloader:
-      short: ark_septentrio_gps_canbootloader
+        CONFIG: ark_septentrio-gps_default
+    ark_septentrio-gps_canbootloader:
+      short: ark_septentrio-gps_canbootloader
       buildType: MinSizeRel
       settings:
-        CONFIG: ark_septentrio_gps_canbootloader
+        CONFIG: ark_septentrio-gps_canbootloader
     ark_cannode_default:
       short: ark_cannode_default
       buildType: MinSizeRel
@@ -181,16 +181,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_fmu-v6x_default
-    ark_fpv_bootloader:
-      short: ark_fpv_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_bootloader
-    ark_fpv_default:
-      short: ark_fpv_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fpv_default
     ark_pi6x_bootloader:
       short: ark_pi6x_bootloader
       buildType: MinSizeRel

.vscode/extensions.json

@@ -4,6 +4,7 @@
     "recommendations": [
         "chiehyu.vscode-astyle",
         "dan-c-underwood.arm",
+        "editorconfig.editorconfig",
         "fredericbonnet.cmake-test-adapter",
         "github.vscode-pull-request-github",
         "marus25.cortex-debug",

.vscode/settings.json

@@ -15,6 +15,7 @@
         "cmake.buildDirectory": "${workspaceFolder}/build/${variant:CONFIG}",
         "cmake.configureOnOpen": true,
         "cmake.ctest.parallelJobs": 1,
+        "cmake.options.statusBarVisibility": "compact",
         "cmake.skipConfigureIfCachePresent": true,
         "cmakeExplorer.buildDir": "${workspaceFolder}/build/px4_sitl_test",
         "cmakeExplorer.parallelJobs": 1,

Makefile

@@ -325,7 +325,6 @@ px4io_update:
 
 bootloaders_update: \
 	ark_fmu-v6x_bootloader \
-	ark_fpv_bootloader \
 	ark_pi6x_bootloader \
 	cuav_nora_bootloader \
 	cuav_x7pro_bootloader \

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -24,8 +24,6 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027
 
-param set-default BAT_N_CELLS 3
-
 param set-default SIH_T_MAX 6
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -33,8 +33,6 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027
 
-param set-default BAT_N_CELLS 3
-
 param set-default SIH_T_MAX 2
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2

ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal

@@ -24,7 +24,6 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -24,7 +24,6 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo

@@ -24,7 +24,6 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -25,7 +25,6 @@ param set-default FW_W_EN 1
 
 param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/4001_gz_x500

@@ -52,3 +52,4 @@ param set-default SIM_GZ_EC_MAX3 1000
 param set-default SIM_GZ_EC_MAX4 1000
 
 param set-default MPC_THR_HOVER 0.60
+param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/4004_gz_standard_vtol

@@ -101,8 +101,9 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_DLL_ACT 2
 
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.75
+param set-default VT_F_TRANS_THR 0.3
 param set-default VT_TYPE 2
 param set-default FD_ESCS_EN 0

ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision

@@ -132,3 +132,5 @@ param set-default SIM_GZ_EC_MAX1 1100
 param set-default SIM_GZ_EC_MAX2 1100
 param set-default SIM_GZ_EC_MAX3 1100
 param set-default SIM_GZ_EC_MAX4 1100
+
+param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/4012_gz_rover_ackermann

@@ -0,0 +1,47 @@
+#!/bin/sh
+# @name Rover Ackermann
+# @type Rover
+# @class Rover
+
+. ${R}etc/init.d/rc.rover_ackermann_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_ackermann}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+# Rover parameters
+param set-default NAV_ACC_RAD 0.5
+param set-default RA_ACC_RAD_GAIN 2
+param set-default RA_ACC_RAD_MAX 3
+param set-default RA_LOOKAHD_GAIN 1
+param set-default RA_LOOKAHD_MAX 10
+param set-default RA_LOOKAHD_MIN 1
+param set-default RA_MAX_ACCEL 1.5
+param set-default RA_MAX_JERK 15
+param set-default RA_MAX_SPEED 3
+param set-default RA_MAX_STR_ANG 0.5236
+param set-default RA_MAX_STR_RATE 360
+param set-default RA_MISS_VEL_DEF 3
+param set-default RA_MISS_VEL_GAIN 5
+param set-default RA_MISS_VEL_MIN 1
+param set-default RA_SPEED_I 0.01
+param set-default RA_SPEED_P 2
+param set-default RA_WHEEL_BASE 0.321
+
+# Simulated sensors
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 0
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 0
+
+# Wheels
+param set-default SIM_GZ_WH_FUNC1 101
+param set-default SIM_GZ_WH_MIN1 0
+param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_DIS1 100
+
+# Steering
+param set-default SIM_GZ_SV_FUNC1 201
+param set-default SIM_GZ_SV_REV 1

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -83,6 +83,7 @@ px4_add_romfs_files(
 	4009_gz_r1_rover
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
+	4012_gz_rover_ackermann
 
 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -15,6 +15,9 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 	if [ -n "${PX4_HOME_LON}" ]; then
 		param set SIH_LOC_LON0 ${PX4_HOME_LON}
 	fi
+	if [ -n "${PX4_HOME_ALT}" ]; then
+		param set SIH_LOC_H0 ${PX4_HOME_ALT}
+	fi
 
 	if simulator_sih start; then
 

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -157,6 +157,7 @@ param set-default CBRK_SUPPLY_CHK 894281
 
 # disable check, no CPU load reported on posix yet
 param set-default COM_CPU_MAX -1
+param set-default COM_RAM_MAX -1
 
 # Don't require RC calibration and configuration
 param set-default COM_RC_IN_MODE 1

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -84,6 +84,13 @@ if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
 	)
 endif()
 
+if(CONFIG_MODULES_ROVER_ACKERMANN)
+	px4_add_romfs_files(
+		rc.rover_ackermann_apps
+		rc.rover_ackermann_defaults
+	)
+endif()
+
 if(CONFIG_MODULES_UUV_ATT_CONTROL)
 	px4_add_romfs_files(
 		rc.uuv_apps

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -44,8 +44,6 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027
 
-param set-default BAT_N_CELLS 3
-
 param set SIH_T_MAX 6
 param set SIH_MASS 0.3
 param set SIH_IXX 0.00402

ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil

@@ -62,8 +62,6 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027
 
-param set-default BAT_N_CELLS 3
-
 param set SIH_T_MAX 2.0
 param set SIH_Q_MAX 0.0165
 param set SIH_MASS 0.2

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -66,7 +66,6 @@ param set-default MC_PITCHRATE_I 0.05
 param set-default MC_YAWRATE_MAX 20
 param set-default MC_AIRMODE 1
 
-param set-default MIS_DIST_1WP 100
 param set-default MIS_TAKEOFF_ALT 15
 
 param set-default MPC_XY_P 0.8

ROMFS/px4fmu_common/init.d/airframes/4017_nxp_hovergames

@@ -6,6 +6,7 @@
 # @class Copter
 #
 # @board px4_fmu-v2 exclude
+# @board px4_fmu-v5x exclude
 # @board bitcraze_crazyflie exclude
 #
 # @maintainer Iain Galloway <iain.galloway@nxp.com>

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -7,6 +7,10 @@
 #
 # @maintainer
 # @board px4_fmu-v2 exclude
+# @board cuav_x7pro exclude
+# @board px4_fmu-v4pro exclude
+# @board px4_fmu-v5x exclude
+# @board px4_fmu-v6x exclude
 #
 
 . ${R}etc/init.d/rc.mc_defaults
@@ -36,7 +40,6 @@ param set-default COM_RC_LOSS_T 3
 
 
 # ekf2
-param set-default EKF2_TERR_MASK 1
 param set-default EKF2_BARO_NOISE 2
 
 param set-default EKF2_BCOEF_X 31.5

ROMFS/px4fmu_common/init.d/airframes/4071_ifo

@@ -12,6 +12,7 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
 #

ROMFS/px4fmu_common/init.d/airframes/4073_ifo-s

@@ -10,6 +10,7 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
 #

ROMFS/px4fmu_common/init.d/airframes/4500_clover4

@@ -8,6 +8,7 @@
 # @maintainer Oleg Kalachev <okalachev@gmail.com>
 #
 # @board px4_fmu-v2 exclude
+# @board px4_fmu-v4pro exclude
 # @board bitcraze_crazyflie exclude
 #
 

ROMFS/px4fmu_common/init.d/airframes/4601_droneblocks_dexi_5

@@ -25,7 +25,6 @@
 param set-default BAT1_CAPACITY 4000
 param set-default BAT1_N_CELLS 6
 param set-default BAT1_V_EMPTY 3.3
-param set-default BAT1_V_LOAD_DROP 0.5
 param set-default BAT_AVRG_CURRENT 13
 
 # Square quadrotor X PX4 numbering

ROMFS/px4fmu_common/init.d/airframes/4901_crazyflie21

@@ -13,6 +13,7 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board px4_fmu-v6x exclude
 # @board diatone_mamba-f405-mk2 exclude
 #
 . ${R}etc/init.d/rc.mc_defaults

ROMFS/px4fmu_common/init.d/airframes/50010_ackermann_rover_generic

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name Generic ackermann rover
+#
+# @type Rover
+# @class Rover
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.rover_ackermann_defaults

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -149,6 +149,12 @@ if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
 	)
 endif()
 
+if(CONFIG_MODULES_ROVER_ACKERMANN)
+	px4_add_romfs_files(
+		50010_ackermann_rover_generic
+	)
+endif()
+
 if(CONFIG_MODULES_UUV_ATT_CONTROL)
 	px4_add_romfs_files(
 		# [60000, 61000] (Unmanned) Underwater Robots

ROMFS/px4fmu_common/init.d/rc.rover_ackermann_apps

@@ -0,0 +1,8 @@
+#!/bin/sh
+# Standard apps for a ackermann drive rover.
+
+# Start rover ackermann drive controller.
+rover_ackermann start
+
+# Start Land Detector.
+land_detector start rover

ROMFS/px4fmu_common/init.d/rc.rover_ackermann_defaults

@@ -0,0 +1,13 @@
+#!/bin/sh
+# Ackermann rover parameters.
+
+set VEHICLE_TYPE rover_ackermann
+param set-default MAV_TYPE 10 # MAV_TYPE_GROUND_ROVER
+param set-default CA_AIRFRAME 5 # Rover (Ackermann)
+param set-default CA_R_REV 1 # Motor is assumed to be reversible
+param set-default EKF2_MAG_TYPE 1 # make sure magnetometer is fused even when not flying
+param set-default EKF2_GBIAS_INIT 0.01
+param set-default EKF2_ANGERR_INIT 0.01
+param set-default NAV_ACC_RAD 0.5 # Waypoint acceptance radius
+param set-default NAV_RCL_ACT 6 # Disarm on manual control loss
+param set-default COM_FAIL_ACT_T 1 # Delay before failsafe after rc loss

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -138,6 +138,12 @@ then
 	adis16507 -S start
 fi
 
+# SCH16T spi external IMU
+if param compare -s SENS_EN_SCH16T 1
+then
+	sch16t -S start
+fi
+
 # Eagle Tree airspeed sensor external I2C
 if param compare -s SENS_EN_ETSASPD 1
 then
@@ -198,13 +204,6 @@ then
 	spl06 -X -a 0x77 start
 fi
 
-# SPA06 sensor external I2C
-if param compare -s SENS_EN_SPA06 1
-then
-	spa06 -X start
-	spa06 -X -a 0x77 start
-fi
-
 # PCF8583 counter (RPM sensor)
 if param compare -s SENS_EN_PCF8583 1
 then

ROMFS/px4fmu_common/init.d/rc.vehicle_setup

@@ -41,6 +41,15 @@ then
 	. ${R}etc/init.d/rc.rover_differential_apps
 fi
 
+#
+# Ackermann Rover setup.
+#
+if [ $VEHICLE_TYPE = rover_ackermann ]
+then
+	# Start ackermann drive rover apps.
+	. ${R}etc/init.d/rc.rover_ackermann_apps
+fi
+
 #
 # VTOL setup.
 #

ROMFS/px4fmu_common/init.d/rcS

@@ -36,6 +36,12 @@ set SDCARD_FORMAT no
 set STARTUP_TUNE 1
 set VEHICLE_TYPE none
 
+# Airframe parameter versioning
+# Value set to 1 by default but can optionally be overridden in the airframe configuration startup script.
+# Airframe maintainers can ensure a reset to the airframe defaults during an update by increasing by one.
+# e.g. add line "set PARAM_DEFAULTS_VER 2" in your airframe file to build the first update that enfoces a reset.
+set PARAM_DEFAULTS_VER 1
+
 #
 # Print full system version.
 #
@@ -123,6 +129,13 @@ else
 		set PARAM_FILE /fs/mtd_params
 	fi
 
+	# Check if /fs/mtd_params is a valid BSON file
+	if ! bsondump docsize /fs/mtd_caldata
+	then
+		echo "New /fs/mtd_caldata size is:"
+		bsondump docsize /fs/mtd_caldata
+	fi
+
 	#
 	# Load parameters.
 	#
@@ -175,13 +188,11 @@ else
 		netman update -i eth0
 	fi
 
-	#
-	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
-	#
+	# To trigger a parameter reset during boot SYS_AUTCONFIG was set to 1 before
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
+		# Reset parameters except airframe, parameter version, RC calibration, sensor calibration, flight modes, total flight time, flight UUID
+		param reset_all SYS_AUTOSTART SYS_PARAM_VER RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	fi
 
 	#
@@ -206,25 +217,42 @@ else
 	fi
 	unset BOARD_RC_DEFAULTS
 
-	#
-	# Set parameters and env variables for selected SYS_AUTOSTART.
-	#
-	set AUTOSTART_PATH etc/init.d/rc.autostart
+	# Load airframe configuration based on SYS_AUTOSTART parameter
 	if ! param compare SYS_AUTOSTART 0
 	then
-		if param greater SYS_AUTOSTART 1000000
+		# rc.autostart directly run the right airframe script which sets the VEHICLE_TYPE
+		# Look for airframe in ROMFS
+		. ${R}etc/init.d/rc.autostart
+
+		if [ ${VEHICLE_TYPE} == none ]
 		then
-			# Use external startup file
+			# Look for airframe on SD card
 			if [ $SDCARD_AVAILABLE = yes ]
 			then
-				set AUTOSTART_PATH etc/init.d/rc.autostart_ext
+				. ${R}etc/init.d/rc.autostart_ext
 			else
-				echo "ERROR [init] SD card not mounted - trying to load airframe from ROMFS"
+				echo "ERROR [init] SD card not mounted - can't load external airframe"
 			fi
 		fi
-		. ${R}$AUTOSTART_PATH
+
+		if [ ${VEHICLE_TYPE} == none ]
+		then
+			echo "ERROR [init] No airframe file found for SYS_AUTOSTART value"
+			param set SYS_AUTOSTART 0
+			tune_control play error
+		fi
+	fi
+
+	# Check parameter version and reset upon airframe configuration version mismatch.
+	# Reboot required because "param reset_all" would reset all "param set" lines from airframe.
+	if ! param compare SYS_PARAM_VER ${PARAM_DEFAULTS_VER}
+	then
+		echo "Switched to different parameter version. Resetting parameters."
+		param set SYS_PARAM_VER ${PARAM_DEFAULTS_VER}
+		param set SYS_AUTOCONFIG 1
+		param save
+		reboot
 	fi
-	unset AUTOSTART_PATH
 
 	#
 	# Start the tone_alarm driver.
@@ -591,6 +619,7 @@ unset LOGGER_ARGS
 unset LOGGER_BUF
 unset PARAM_FILE
 unset PARAM_BACKUP_FILE
+unset PARAM_DEFAULTS_VER
 unset RC_INPUT_ARGS
 unset SDCARD_AVAILABLE
 unset SDCARD_EXT_PATH

Tools/astyle/check_code_style.sh

@@ -3,22 +3,20 @@
 FILE=$1
 DIR=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
 
-if [ -f "$FILE" ]; then
-	CHECK_FAILED=$(${DIR}/fix_code_style.sh --dry-run --formatted $FILE)
-	if [ -n "$CHECK_FAILED" ]; then
-		${DIR}/fix_code_style.sh --quiet < $FILE > $FILE.pretty
+CHECK_FAILED=$(${DIR}/fix_code_style.sh --dry-run --formatted $FILE)
+if [ -n "$CHECK_FAILED" ]; then
+	${DIR}/fix_code_style.sh --quiet < $FILE > $FILE.pretty
 
-		echo -e 'Formatting issue found in' $FILE
-		echo
-		git --no-pager diff --no-index --minimal --histogram --color=always $FILE $FILE.pretty | grep -vE -e "^.{,4}diff.*\.pretty.{,3}$" -e "^.{,4}--- a/.*$" -e "^.{,4}\+\+\+ b/.*$" -e "^.{,5}@@ .* @@.*$" -e "^.{,4}index .{10}\.\."
-		rm -f $FILE.pretty
-		echo
+	echo -e 'Formatting issue found in' $FILE
+	echo
+	git --no-pager diff --no-index --minimal --histogram --color=always $FILE $FILE.pretty | grep -vE -e "^.{,4}diff.*\.pretty.{,3}$" -e "^.{,4}--- a/.*$" -e "^.{,4}\+\+\+ b/.*$" -e "^.{,5}@@ .* @@.*$" -e "^.{,4}index .{10}\.\."
+	rm -f $FILE.pretty
+	echo
 
-		if [[ $PX4_ASTYLE_FIX -eq 1 ]]; then
-			${DIR}/fix_code_style.sh $FILE
-		else
-			echo 'to fix automatically run "make format" or "./Tools/astyle/fix_code_style.sh' $FILE'"'
-			exit 1
-		fi
+	if [[ $PX4_ASTYLE_FIX -eq 1 ]]; then
+		${DIR}/fix_code_style.sh $FILE
+	else
+		echo 'to fix automatically run "make format" or "./Tools/astyle/fix_code_style.sh' $FILE'"'
+		exit 1
 	fi
 fi

Tools/astyle/files_to_check_code_style.sh

@@ -18,7 +18,8 @@ exec find boards msg src platforms test \
     -path src/lib/events/libevents -prune -o \
     -path src/lib/parameters/uthash -prune -o \
     -path src/lib/wind_estimator/python/generated -prune -o \
-    -path src/modules/ekf2/EKF -prune -o \
+    -path src/modules/ekf2/EKF/python/ekf_derivation/generated -prune -o \
+    -path src/modules/ekf2/EKF/yaw_estimator/derivation/generated -prune -o \
     -path src/modules/gyro_fft/CMSIS_5 -prune -o \
     -path src/modules/mavlink/mavlink -prune -o \
     -path test/mavsdk_tests/catch2 -prune -o \
@@ -31,4 +32,4 @@ exec find boards msg src platforms test \
     -path src/lib/cdrstream/rosidl -prune -o \
     -path src/modules/zenoh/zenoh-pico -prune -o \
     -path boards/modalai/voxl2/libfc-sensor-api -prune -o \
-    -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) | grep $PATTERN
+    \( -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) -print \) | grep $PATTERN

Tools/check_submodules.sh

@@ -6,7 +6,7 @@ function check_git_submodule {
 if [[ -f $1"/.git" || -d $1"/.git" ]]; then
 
 	# always update within CI environment or configuring withing VSCode CMake where you can't interact
-	if [ "$CI" == "true" ] || [ -n "${VSCODE_PID+set}" ]; then
+	if [ "$CI" == "true" ] || [ -n "${VSCODE_PID+set}" ] || [ -n "${CLION_IDE+set}" ]; then
 		git submodule --quiet sync --recursive -- $1
 		git submodule --quiet update --init --recursive --jobs=8 -- $1  || true
 		git submodule --quiet sync --recursive -- $1

Tools/ecl_ekf/plotting/pdf_report.py

@@ -223,7 +223,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
         data_plot.save()
         data_plot.close()
 
-        # plot innovation_check_flags summary
+        # plot innovation flags summary
         data_plot = CheckFlagsPlot(
             status_flags_time, estimator_status_flags, [['reject_hor_vel', 'reject_hor_pos'], ['reject_ver_vel', 'reject_ver_pos',
                                                                                'reject_hagl'],

Tools/module_config/output_groups_from_timer_config.py

@@ -34,33 +34,41 @@ def extract_timer(line):
     if search:
         return search.group(1), 'generic'
 
-    # nxp rt1062 format: initIOPWM(PWM::FlexPWM2),
-    search = re.search('PWM::Flex([0-9a-zA-Z_]+)[,\)]', line, re.IGNORECASE)
+    # NXP FlexPWM format format: initIOPWM(PWM::FlexPWM2),
+    search = re.search('PWM::Flex([0-9a-zA-Z_]+)..PWM::Submodule([0-9])[,\)]', line, re.IGNORECASE)
     if search:
-        return search.group(1), 'imxrt'
+        return (search.group(1) + '_' +  search.group(2)), 'imxrt'
 
     return None, 'unknown'
 
-def extract_timer_from_channel(line, num_channels_already_found):
+def extract_timer_from_channel(line, timer_names):
     # Try format: initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
     search = re.search('Timer::([0-9a-zA-Z_]+), ', line, re.IGNORECASE)
     if search:
         return search.group(1)
 
-    # nxp rt1062 format: initIOTimerChannel(io_timers, {PWM::PWM2_PWM_A, PWM::Submodule0}, IOMUX::Pad::GPIO_B0_06),
-    search = re.search('PWM::(PWM[0-9]+)[_,\)]', line, re.IGNORECASE)
+    # NXP FlexPWM format: initIOTimerChannel(io_timers, {PWM::PWM2_PWM_A, PWM::Submodule0}, IOMUX::Pad::GPIO_B0_06),
+    search = re.search('PWM::(PWM[0-9]+).*PWM::Submodule([0-9])', line, re.IGNORECASE)
     if search:
-        # imxrt uses a 1:1 timer group to channel association
-        return str(num_channels_already_found)
+        return str(timer_names.index((search.group(1) + '_' +  search.group(2))))
 
     return None
 
+def imxrt_is_dshot(line):
+
+    # NXP FlexPWM format format: initIOPWM(PWM::FlexPWM2),
+    search = re.search('(initIOPWMDshot)', line, re.IGNORECASE)
+    if search:
+        return True
+
+    return False
+
 def get_timer_groups(timer_config_file, verbose=False):
     with open(timer_config_file, 'r') as f:
         timer_config = f.read()
 
     # timers
-    dshot_support = {} # key: timer
+    dshot_support = {str(i): False for i in range(16)}
     timers_start_marker = 'io_timers_t io_timers'
     timers_start = timer_config.find(timers_start_marker)
     if timers_start == -1:
@@ -69,6 +77,7 @@ def get_timer_groups(timer_config_file, verbose=False):
     open_idx, close_idx = find_matching_brackets(('{', '}'), timer_config, verbose)
     timers_str = timer_config[open_idx:close_idx]
     timers = []
+    timer_names = []
     for line in timers_str.splitlines():
         line = line.strip()
         if len(line) == 0 or line.startswith('//'):
@@ -77,14 +86,11 @@ def get_timer_groups(timer_config_file, verbose=False):
 
         if timer_type == 'imxrt':
             if verbose: print('imxrt timer found')
-            max_num_channels = 16 # Just add a fixed number of timers
-            timers = [str(i) for i in range(max_num_channels)]
-            dshot_support = {str(i): False for i in range(max_num_channels)}
-            for i in range(8): # First 8 channels support dshot
-                dshot_support[str(i)] = True
-            break
-
-        if timer:
+            timer_names.append(timer)
+            if imxrt_is_dshot(line):
+                dshot_support[str(len(timers))] = True
+            timers.append(str(len(timers)))
+        elif timer:
             if verbose: print('found timer def: {:}'.format(timer))
             dshot_support[timer] = 'DMA' in line
             timers.append(timer)
@@ -111,7 +117,7 @@ def get_timer_groups(timer_config_file, verbose=False):
             continue
 
         if verbose: print('--'+line+'--')
-        timer = extract_timer_from_channel(line, len(channel_timers))
+        timer = extract_timer_from_channel(line, timer_names)
 
         if timer:
             if verbose: print('Found timer: {:} in channel line {:}'.format(timer, line))

Tools/px4airframes/rcout.py

@@ -79,12 +79,6 @@ class RCOutput():
         result += "then\n"
         result += "\techo \"Loading airframe: /etc/init.d/airframes/${AIRFRAME}\"\n"
         result += "\t. /etc/init.d/airframes/${AIRFRAME}\n"
-        if not post_start:
-            result += "else\n"
-            result += "\techo \"ERROR [init] No file matches SYS_AUTOSTART value found in : /etc/init.d/airframes\"\n"
-            # Reset the configuration
-            result += "\tparam set SYS_AUTOSTART 0\n"
-            result += "\ttone_alarm ${TUNE_ERR}\n"
         result += "fi\n"
         result += "unset AIRFRAME"
         self.output = result

Tools/px4moduledoc/srcparser.py

@@ -15,7 +15,7 @@ class ModuleDocumentation(object):
     # TOC in https://github.com/PX4/PX4-user_guide/blob/main/en/SUMMARY.md
     valid_categories = ['driver', 'estimator', 'controller', 'system',
                         'communication', 'command', 'template', 'simulation', 'autotune']
-    valid_subcategories = ['', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
+    valid_subcategories = ['', 'camera', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
                            'magnetometer', 'baro', 'optical_flow', 'rpm_sensor', 'transponder']
 
     max_line_length = 80 # wrap lines that are longer than this

Tools/setup/arch.sh

@@ -95,7 +95,7 @@ if [[ $INSTALL_SIM == "true" ]]; then
 
 	# java (jmavsim)
 	sudo pacman -S --noconfirm --needed \
-		ant
+		ant \
 		;
 
 	# Gazebo setup

Tools/setup/requirements.txt

@@ -1,5 +1,4 @@
 argcomplete
-argparse>=1.2
 cerberus
 coverage
 empy==3.3.4
@@ -8,7 +7,7 @@ jinja2>=2.8
 jsonschema
 kconfiglib
 lxml
-matplotlib>=3.0.*
+matplotlib>=3.0
 numpy>=1.13
 nunavut>=1.1.0
 packaging

Tools/setup/ubuntu.sh

@@ -66,6 +66,8 @@ elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
 elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
 	echo "Ubuntu 22.04"
+elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+	echo "Linux Mint 21.3"
 fi
 
 
@@ -146,7 +148,7 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		util-linux \
 		vim-common \
 		;
-	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" ]]; then
+	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" || "${UBUNTU_RELEASE}" == "21.3" ]]; then
 		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		kconfig-frontends \
 		;
@@ -205,6 +207,8 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		java_version=13
 	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
 		java_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		java_version=11
 	else
 		java_version=14
 	fi
@@ -228,6 +232,17 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
 		sudo apt-get update -y --quiet
 
+		# Install Gazebo
+		gazebo_packages="gz-garden"
+	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		echo "Gazebo (Garden) will be installed"
+		echo "Earlier versions will be removed"
+		# Add Gazebo binary repository
+		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
+		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
+
+		sudo apt-get update -y --quiet
+
 		# Install Gazebo
 		gazebo_packages="gz-garden"
 	else

Tools/simulation/gazebo-classic/sitl_gazebo-classic

@@ -1 +1 @@
-Subproject commit da7206e057703cc645770f02437013358b71e1c0
+Subproject commit 67431d233f0f08de647f0eb11239816f9c8bd6c6

Tools/simulation/gz

@@ -1 +1 @@
-Subproject commit d754381a1cecdd7f17050acd72bf5bf1327bced6
+Subproject commit 312cd002ff9602644efef58eef93e447c10dcbe8

boards/airmind/mindpx-v2/default.px4board

@@ -10,9 +10,9 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y

boards/ark/can-rtk-gps/init/rc.board_defaults

@@ -6,6 +6,7 @@
 param set-default CBRK_IO_SAFETY 0
 param set-default CANNODE_SUB_MBD 1
 param set-default CANNODE_SUB_RTCM 1
+param set-default GPS_1_GNSS 63
 param set-default MBE_ENABLE 1
 param set-default SENS_IMU_CLPNOTI 0
 

boards/ark/can-rtk-gps/src/board_config.h

@@ -47,7 +47,7 @@
 #define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)
 
 /* Safety LED */
-#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
 
 /* Tone alarm output. */
 #define TONE_ALARM_TIMER             2    /* timer 2 */

boards/ark/cannode/default.px4board

@@ -14,6 +14,7 @@ CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_COMMON_HYGROMETERS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
+CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_IRLOCK=y

boards/ark/fmu-v6x/default.px4board

@@ -8,11 +8,11 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -22,6 +22,7 @@ CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
+CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
@@ -58,6 +59,7 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
+CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y

boards/ark/fmu-v6x/nuttx-config/nsh/defconfig

@@ -147,8 +147,8 @@ CONFIG_NETDB_DNSSERVER_NOADDR=y
 CONFIG_NETDEV_PHY_IOCTL=y
 CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
-CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
-CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_DNSIPADDR=0xA290AFE
+CONFIG_NETINIT_DRIPADDR=0xA290AFE
 CONFIG_NETINIT_MONITOR=y
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49

boards/ark/fpv/init/rc.board_defaults

@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-# transision from params file to flash-based params (2022-08)
-if [ -f $PARAM_FILE ]
-then
-	param load $PARAM_FILE
-	param save
-	# create a backup
-	mv $PARAM_FILE ${PARAM_FILE}.bak
-	reboot
-fi
-
-# TODO: Tune the following parameters
-param set-default SENS_EN_THERMAL 1
-param set-default SENS_IMU_TEMP 10.0
-#param set-default SENS_IMU_TEMP_FF 0.0
-#param set-default SENS_IMU_TEMP_I 0.025
-#param set-default SENS_IMU_TEMP_P 1.0
-
-if ver hwtypecmp ARKFPV000
-then
-	param set-default SENS_TEMP_ID 3014666
-fi
-
-param set-default BAT1_V_DIV 21.0
-
-param set-default RC_CRSF_PRT_CFG 300
-param set-default RC_SBUS_PRT_CFG 0
-
-param set-default IMU_GYRO_DNF_EN 3
-
-# Single IMU
-param set-default EKF2_MULTI_IMU 0
-param set-default SENS_IMU_MODE 1

boards/ark/fpv/init/rc.board_sensors

@@ -1,18 +0,0 @@
-#!/bin/sh
-#
-# ARKFPV specific board sensors init
-#------------------------------------------------------------------------------
-
-board_adc start
-
-if ver hwtypecmp ARKFPV000
-then
-	# Internal SPI bus IIM42653
-	iim42653 -R 14 -s -b 1 start
-fi
-
-# Internal magnetometer on I2C
-iis2mdc -R 0 -I -b 4 start
-
-# Internal Baro on I2C
-bmp388 -I -b 2 start

boards/ark/fpv/nuttx-config/Kconfig

@@ -1,17 +0,0 @@
-#
-# For a description of the syntax of this configuration file,
-# see misc/tools/kconfig-language.txt.
-#
-config BOARD_HAS_PROBES
-	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
-	default y
-	---help---
-		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
-
-config BOARD_USE_PROBES
-	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
-	default n
-	depends on BOARD_HAS_PROBES
-
-	---help---
-		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.

boards/ark/fpv/nuttx-config/include/board_dma_map.h

@@ -1,108 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2024 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-//                                                     V
-
-// Timer 4 Channel 1                               /* DMA1:29 TIM4CH1 */
-
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0   /* 1 DMA1:37 IIM-42653 */
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0   /* 2 DMA1:38 IIM-42653 */
-
-//#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0  /* 3 DMA1:39 ICM-42688-P */
-//#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0  /* 4 DMA1:40 ICM-42688-P */
-
-#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
-#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
-
-//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
-//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
-
-// Timer 8 Channel 1                               /* DMA1:47 TIM8CH1 */
-// Timer 8 Channel 2                               /* DMA1:48 TIM8CH2 */
-// Timer 8 Channel 3                               /* DMA1:49 TIM8CH3 */
-// Timer 8 Channel 4                               /* DMA1:50 TIM8CH4 */
-
-// Timer 5 Channel 1                               /* DMA1:55 TIM5CH1 */
-// Timer 5 Channel 2                               /* DMA1:56 TIM5CH2 */
-// Timer 5 Channel 3                               /* DMA1:57 TIM5CH3 */
-// Timer 5 Channel 4                               /* DMA1:58 TIM5CH4 */
-
-// #define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 UART4 */
-// #define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 UART4 */
-
-#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0 /* 5 DMA1:71 RC */
-// #define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0 /* 6 DMA1:72 RC */
-
-// Assigned in timer_config.cpp
-
-// Timer 4                                          /* 7 DMA1:32 TIM4UP */
-// Timer 5                                          /* 8 DMA1:50 TIM5UP */
-
-// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-//                                                     V
-
-// Timer 4 Channel 1                               /* DMA2:29 TIM4CH1 */
-
-#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_1   /* 3 DMA2:43 TELEM3 */
-#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_1   /* 4 DMA2:44 TELEM3 */
-
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
-
-// Timer 8 Channel 1                                 /* DMA2:47 TIM8CH1 */
-// Timer 8 Channel 2                                 /* DMA2:48 TIM8CH2 */
-// Timer 8 Channel 3                                 /* DMA2:49 TIM8CH3 */
-// Timer 8 Channel 4                                 /* DMA2:50 TIM8CH4 */
-
-// Timer 5 Channel 1                                 /* DMA2:55 TIM5CH1 */
-// Timer 5 Channel 2                                 /* DMA2:56 TIM5CH2 */
-// Timer 5 Channel 3                                 /* DMA2:57 TIM5CH3 */
-// Timer 5 Channel 4                                 /* DMA2:58 TIM5CH4 */
-
-//#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 DMA2:61 BMI088 */
-//#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 DMA2:62 BMI088 */
-
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
-#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66 TELEM2 */
-
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79 TELEM1 */
-#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80 TELEM1 */
-
-// DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
-//                                                     V
-
-#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
-#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */

boards/ark/fpv/src/board_config.h

@@ -1,397 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2016-2024 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * ARK FPV internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-
-#include <stm32_gpio.h>
-
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-
-#undef TRACE_PINS
-
-/* Configuration ************************************************************************************/
-
-#  define BOARD_HAS_USB_VALID           1
-#  define BOARD_HAS_NBAT_V              1
-#  define BOARD_HAS_NBAT_I              1
-
-/* PX4FMU GPIOs ***********************************************************************************/
-
-/* Trace Clock and D0-D3 are available on the trace connector
- *
- * TRACECLK PE2  - Dedicated       - Trace Connector Pin 1
- * TRACED0  PE3  - nLED_RED        - Trace Connector Pin 3
- * TRACED1  PE4  - nLED_GREEN      - Trace Connector Pin 5
- * TRACED2  PE5  - nLED_BLUE       - Trace Connector Pin 7
- * TRACED3  PE6  - nARMED          - Trace Connector Pin 8
-
- */
-
-/* LEDs are driven with push open drain to support Anode to 5V or 3.3V or used as TRACE0-2 */
-
-#if !defined(TRACE_PINS)
-#  define GPIO_nLED_RED        /* PE3 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
-#  define GPIO_nLED_GREEN      /* PE4 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
-#  define GPIO_nLED_BLUE       /* PE5 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
-
-#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
-#  define BOARD_OVERLOAD_LED     LED_RED
-#  define BOARD_ARMED_STATE_LED  LED_BLUE
-
-#else
-
-#  define GPIO_TRACECLK1 (GPIO_TRACECLK |GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN2)
-#  define GPIO_TRACED0   (GPIO_TRACED0_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN3)
-#  define GPIO_TRACED1   (GPIO_TRACED1_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN4)
-#  define GPIO_TRACED2   (GPIO_TRACED2_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN5)
-#  define GPIO_TRACED3   (GPIO_TRACED3_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN6)
-//#define GPIO_TRACESWO                        //(GPIO_ALT|GPIO_AF0|GPIO_PORTB|GPIO_PIN3)
-
-#  undef  BOARD_HAS_CONTROL_STATUS_LEDS
-#  undef  BOARD_OVERLOAD_LED
-#  undef  BOARD_ARMED_STATE_LED
-
-#  define GPIO_nLED_RED    GPIO_TRACED0
-#  define GPIO_nLED_GREEN  GPIO_TRACED1
-#  define GPIO_nLED_BLUE   GPIO_TRACED2
-#  define GPIO_nARMED      GPIO_TRACED3
-#  define GPIO_nARMED_INIT GPIO_TRACED3
-#endif
-
-/* SPI */
-
-#define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
-#define SPI6_RESET(on_true)          px4_arch_gpiowrite(SPI6_nRESET_EXTERNAL1, !(on_true))
-
-/* I2C busses */
-
-/* Devices on the onboard buses.
- *
- * Note that these are unshifted addresses.
- */
-#define PX4_I2C_OBDEV_SE050         0x48
-
-/*
- * ADC channels
- *
- * These are the channel numbers of the ADCs of the microcontroller that
- * can be used by the Px4 Firmware in the adc driver
- */
-
-/* ADC defines to be used in sensors.cpp to read from a particular channel */
-
-#define ADC1_CH(n)                  (n)
-
-/* N.B. there is no offset mapping needed for ADC3 because */
-#define ADC3_CH(n)                  (n)
-
-/* We are only use ADC3 for REV/VER.
- * ADC3_6V6 and ADC3_3V3 are mapped back to ADC1
- * To do this We are relying on PC2_C, PC3_C being connected to PC2, PC3
- * respectively by the SYSCFG_PMCR default of setting for PC3SO PC2SO PA1SO
- * PA0SO of 0.
- *
- *  0 Analog switch closed (pads are connected through the analog switch)
- *
- * So ADC3_INP0 is GPIO_ADC123_INP12
- *    ADC3_INP1 is GPIO_ADC12_INP13
- */
-
-/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
-
-#define PX4_ADC_GPIO  \
-	/* PA0  */  GPIO_ADC1_INP16,   \
-	/* PA4  */  GPIO_ADC12_INP18,  \
-	/* PB0  */  GPIO_ADC12_INP9,   \
-	/* PB1  */  GPIO_ADC12_INP5,   \
-	/* PC2  */  GPIO_ADC123_INP12, \
-	/* PC3  */  GPIO_ADC12_INP13,  \
-	/* PF12 */  GPIO_ADC1_INP6,    \
-	/* PH3  */  GPIO_ADC3_INP14,   \
-	/* PH4  */  GPIO_ADC3_INP15
-
-/* Define Channel numbers must match above GPIO pin IN(n)*/
-#define ADC_BATTERY_VOLTAGE_CHANNEL        	/* PB0 */  ADC1_CH(9)
-#define ADC_BATTERY_CURRENT_CHANNEL        	/* PC2 */  ADC3_CH(12)
-#define ADC_SCALED_12V_CHANNEL	     		/* PA4 */  ADC1_CH(18)
-#define ADC_SCALED_VDD_3V3_SENSORS_CHANNEL     /* PA0 */  ADC1_CH(16)
-#define ADC_SCALED_V5_CHANNEL                   /* PB1 */  ADC1_CH(5)
-#define ADC_HW_VER_SENSE_CHANNEL                /* PH3 */  ADC3_CH(14)
-#define ADC_HW_REV_SENSE_CHANNEL                /* PH4 */  ADC3_CH(15)
-
-#define ADC_CHANNELS \
-	((1 << ADC_BATTERY_VOLTAGE_CHANNEL)         | \
-	 (1 << ADC_BATTERY_CURRENT_CHANNEL)         | \
-	 (1 << ADC_SCALED_VDD_3V3_SENSORS_CHANNEL)  | \
-	 (1 << ADC_SCALED_V5_CHANNEL)               | \
-	 (1 << ADC_SCALED_12V_CHANNEL))
-
-
-#define BOARD_BATTERY1_V_DIV	 (21.0f) // (20k + 1k) / 1k = 21
-
-#define ADC_SCALED_PAYLOAD_SENSE ADC_SCALED_12V_CHANNEL
-
-/* HW has to large of R termination on ADC todo:change when HW value is chosen */
-
-#define HW_REV_VER_ADC_BASE STM32_ADC3_BASE
-
-#define SYSTEM_ADC_BASE STM32_ADC1_BASE
-
-/* HW has to large of R termination on ADC todo:change when HW value is chosen */
-#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
-
-/* HW Version and Revision drive signals Default to 1 to detect */
-#define BOARD_HAS_HW_SPLIT_VERSIONING
-
-#define GPIO_HW_VER_REV_DRIVE  /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
-#define GPIO_HW_REV_SENSE      /* PH4 */  GPIO_ADC3_INP15
-#define GPIO_HW_VER_SENSE      /* PH3 */  GPIO_ADC3_INP14
-#define HW_INFO_INIT_PREFIX    "ARKFPV"
-
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2
-//                 Base/FMUM
-#define ARKFPV_0   HW_FMUM_ID(0x0) // ARKFPV,     Sensor Set  Rev 0
-#define ARKFPV_1   HW_FMUM_ID(0x1) // ARKFPV,     Sensor Set  Rev 1
-
-#define UAVCAN_NUM_IFACES_RUNTIME  1
-
-/* HEATER
- * PWM in future
- */
-#define GPIO_HEATER_OUTPUT   /* PB10  T2CH3 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
-#define HEATER_OUTPUT_EN(on_true)	       px4_arch_gpiowrite(GPIO_HEATER_OUTPUT, (on_true))
-
-/* PE6 is nARMED
- *  The GPIO will be set as input while not armed HW will have external HW Pull UP.
- *  While armed it shall be configured at a GPIO OUT set LOW
- */
-#if !defined(TRACE_PINS)
-#define GPIO_nARMED_INIT     /* PE6 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN6)
-#define GPIO_nARMED          /* PE6 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN6)
-#define BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE(enabled)  px4_arch_configgpio((enabled) ? GPIO_nARMED : GPIO_nARMED_INIT)
-#define BOARD_GET_EXTERNAL_LOCKOUT_STATE() px4_arch_gpioread(GPIO_nARMED)
-#endif
-
-/* PWM
- */
-#define DIRECT_PWM_OUTPUT_CHANNELS   9
-
-#define GPIO_FMU_CH1                    /* PI0  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTI|GPIO_PIN0)
-#define GPIO_FMU_CH2                    /* PH12 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTH|GPIO_PIN12)
-#define GPIO_FMU_CH3                    /* PH11 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTH|GPIO_PIN11)
-#define GPIO_FMU_CH4                    /* PH10 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTH|GPIO_PIN10)
-#define GPIO_FMU_CH5                    /* PI5  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTI|GPIO_PIN5)
-#define GPIO_FMU_CH6                    /* PI6  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTI|GPIO_PIN6)
-#define GPIO_FMU_CH7                    /* PI7  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTI|GPIO_PIN7)
-#define GPIO_FMU_CH8                    /* PI2  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTI|GPIO_PIN2)
-#define GPIO_FMU_CH9                    /* PD12 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTD|GPIO_PIN12)
-
-#define GPIO_SPIX_SYNC                  /* PE9  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTE|GPIO_PIN9)
-
-/* Power supply control and monitoring GPIOs */
-
-#define GPIO_VDD_5V_PGOOD         	/* PF13 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTF|GPIO_PIN13)
-#define GPIO_VDD_12V_PGOOD	 	/* PE15 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTE|GPIO_PIN15)
-#define GPIO_5V_ON_BATTERY	 	/* PG1  */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTG|GPIO_PIN1)
-#define GPIO_VDD_12V_EN			/* PG4  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN4)
-
-#define GPIO_VDD_3V3_SD_CARD_EN         /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
-
-
-#define BOARD_NUMBER_BRICKS             1
-
-/* Define True logic Power Control in arch agnostic form */
-
-#define VDD_3V3_SD_CARD_EN(on_true)        px4_arch_gpiowrite(GPIO_VDD_3V3_SD_CARD_EN, (on_true))
-#define PAYLOAD_POWER_EN(on_true)          px4_arch_gpiowrite(GPIO_VDD_12V_EN, (on_true))
-
-/* USB OTG FS
- *
- * PA9  OTG_FS_VBUS VBUS sensing
- */
-#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
-
-#define FLASH_BASED_PARAMS
-
-/* High-resolution timer */
-#define HRT_TIMER               3  /* use timer3 for the HRT */
-#define HRT_TIMER_CHANNEL       1 /* use capture/compare channel 1 */
-
-/* RC Serial port */
-
-#define RC_SERIAL_PORT                     "/dev/ttyS4"
-
-/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
-#define PWMIN_TIMER                       4
-#define PWMIN_TIMER_CHANNEL    /* T4C2 */ 2
-#define GPIO_PWM_IN            /* PD13 */ GPIO_TIM4_CH2IN_2
-
-#define SDIO_SLOTNO                    0  /* Only one slot */
-#define SDIO_MINOR                     0
-
-/* SD card bringup does not work if performed on the IDLE thread because it
- * will cause waiting.  Use either:
- *
- *  CONFIG_BOARDCTL=y, OR
- *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
- */
-
-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARDCTL) && \
-   !defined(CONFIG_BOARD_INITTHREAD)
-#  warning SDIO initialization cannot be perfomed on the IDLE thread
-#endif
-
-/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
- * this board support the ADC system_power interface, and therefore
- * provides the true logic GPIO BOARD_ADC_xxxx macros.
- */
-#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
-
-/* ARKFPV never powers off the Servo rail */
-
-#define BOARD_ADC_SERVO_VALID     (1)
-
-#define BOARD_ADC_BRICK_VALID   (px4_arch_gpioread(GPIO_VDD_5V_PGOOD))
-#define BOARD_GPIO_PAYOLOAD_V_VALID (px4_arch_gpioread(GPIO_VDD_12V_PGOOD))
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-/* This board provides the board_on_reset interface */
-
-#define BOARD_HAS_ON_RESET 1
-
-#if defined(TRACE_PINS)
-#define GPIO_TRACE                          \
-	GPIO_TRACECLK1,                           \
-	GPIO_TRACED0,                             \
-	GPIO_TRACED1,                             \
-	GPIO_TRACED2,                             \
-	GPIO_TRACED3
-#else
-#define GPIO_TRACE (GPIO_OUTPUT|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
-#endif
-
-#define PX4_GPIO_INIT_LIST { \
-		GPIO_TRACE,                       \
-		PX4_ADC_GPIO,                     \
-		GPIO_HW_VER_REV_DRIVE,            \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_HEATER_OUTPUT,               \
-		GPIO_VDD_5V_PGOOD,                \
-		GPIO_VDD_12V_PGOOD,               \
-		GPIO_VDD_12V_EN,                  \
-		GPIO_5V_ON_BATTERY,               \
-		GPIO_VDD_3V3_SD_CARD_EN,          \
-		GPIO_nARMED_INIT,                 \
-		SPI6_nRESET_EXTERNAL1,            \
-		GPIO_FMU_CH1,     	          \
-		GPIO_FMU_CH2,     	          \
-		GPIO_FMU_CH3,     	          \
-		GPIO_FMU_CH4,     	          \
-		GPIO_FMU_CH5,     	          \
-		GPIO_FMU_CH6,     	          \
-		GPIO_FMU_CH7,     	          \
-		GPIO_FMU_CH8,     	          \
-		GPIO_FMU_CH9,     	          \
-		GPIO_SPIX_SYNC                    \
-	}
-
-#define BOARD_ENABLE_CONSOLE_BUFFER
-
-#define BOARD_NUM_IO_TIMERS  3
-#define BOARD_SPIX_SYNC_FREQ 32000
-
-__BEGIN_DECLS
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void);
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-extern void stm32_usbinitialize(void);
-
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS

boards/ark/fpv/src/can.c

@@ -1,140 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file can.c
- *
- * Board-specific CAN functions.
- */
-
-#if !defined(CONFIG_CAN)
-
-#include <stdint.h>
-
-#include "board_config.h"
-
-
-__EXPORT
-uint16_t board_get_can_interfaces(void)
-{
-	uint16_t enabled_interfaces = 0x3;
-
-	enabled_interfaces &= ~(1 << 1);
-
-	return enabled_interfaces;
-}
-
-#else
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_internal.h"
-
-#include "chip.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-#endif /* CONFIG_CAN */

boards/ark/fpv/src/spix_sync.c

@@ -1,309 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2023 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name Airmind nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
-* @file spix_sync.c
-*
-*
-*/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <board_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdbool.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <ctype.h>
-
-
-#include <perf/perf_counter.h>
-#include <systemlib/err.h>
-#include <systemlib/px4_macros.h>
-
-#include <px4_arch/io_timer.h>
-
-#include "spix_sync.h"
-
-#define REG(_tmr, _reg) (*(volatile uint32_t *)(spix_sync_timers[_tmr].base + _reg))
-
-#define rCR1(_tmr)      REG(_tmr, STM32_GTIM_CR1_OFFSET)
-#define rCR2(_tmr)      REG(_tmr, STM32_GTIM_CR2_OFFSET)
-#define rSMCR(_tmr)     REG(_tmr, STM32_GTIM_SMCR_OFFSET)
-#define rDIER(_tmr)     REG(_tmr, STM32_GTIM_DIER_OFFSET)
-#define rSR(_tmr)       REG(_tmr, STM32_GTIM_SR_OFFSET)
-#define rEGR(_tmr)      REG(_tmr, STM32_GTIM_EGR_OFFSET)
-#define rCCMR1(_tmr)    REG(_tmr, STM32_GTIM_CCMR1_OFFSET)
-#define rCCMR2(_tmr)    REG(_tmr, STM32_GTIM_CCMR2_OFFSET)
-#define rCCER(_tmr)     REG(_tmr, STM32_GTIM_CCER_OFFSET)
-#define rCNT(_tmr)      REG(_tmr, STM32_GTIM_CNT_OFFSET)
-#define rPSC(_tmr)      REG(_tmr, STM32_GTIM_PSC_OFFSET)
-#define rARR(_tmr)      REG(_tmr, STM32_GTIM_ARR_OFFSET)
-#define rCCR1(_tmr)     REG(_tmr, STM32_GTIM_CCR1_OFFSET)
-#define rCCR2(_tmr)     REG(_tmr, STM32_GTIM_CCR2_OFFSET)
-#define rCCR3(_tmr)     REG(_tmr, STM32_GTIM_CCR3_OFFSET)
-#define rCCR4(_tmr)     REG(_tmr, STM32_GTIM_CCR4_OFFSET)
-#define rDCR(_tmr)      REG(_tmr, STM32_GTIM_DCR_OFFSET)
-#define rDMAR(_tmr)     REG(_tmr, STM32_GTIM_DMAR_OFFSET)
-#define rBDTR(_tmr)     REG(_tmr, STM32_ATIM_BDTR_OFFSET)
-
-#define BOARD_SPIX_SYNC_PWM_FREQ 1024000
-
-unsigned
-spix_sync_timer_get_period(unsigned timer)
-{
-	return (rARR(timer));
-}
-
-static void spix_sync_timer_init_timer(unsigned timer, unsigned rate)
-{
-	if (spix_sync_timers[timer].base) {
-
-		irqstate_t flags = px4_enter_critical_section();
-
-		/* enable the timer clock before we try to talk to it */
-
-		modifyreg32(spix_sync_timers[timer].clock_register, 0, spix_sync_timers[timer].clock_bit);
-
-		/* disable and configure the timer */
-		rCR1(timer) = 0;
-		rCR2(timer) = 0;
-		rSMCR(timer) = 0;
-		rDIER(timer) = 0;
-		rCCER(timer) = 0;
-		rCCMR1(timer) = 0;
-		rCCMR2(timer) = 0;
-		rCCR1(timer) = 0;
-		rCCR2(timer) = 0;
-		rCCR3(timer) = 0;
-		rCCR4(timer) = 0;
-		rCCER(timer) = 0;
-		rDCR(timer) = 0;
-
-		if ((spix_sync_timers[timer].base == STM32_TIM1_BASE) || (spix_sync_timers[timer].base == STM32_TIM8_BASE)) {
-
-			/* master output enable = on */
-
-			rBDTR(timer) = ATIM_BDTR_MOE;
-		}
-
-		/* If the timer clock source provided as clock_freq is the STM32_APBx_TIMx_CLKIN
-		 * then configure the timer to free-run at 1MHz.
-		 * Otherwise, other frequencies are attainable by adjusting .clock_freq accordingly.
-		 */
-
-		rPSC(timer) = (spix_sync_timers[timer].clock_freq / BOARD_SPIX_SYNC_PWM_FREQ) - 1;
-
-		/* configure the timer to update at the desired rate */
-
-		rARR(timer) = (BOARD_SPIX_SYNC_PWM_FREQ / rate) - 1;
-
-		/* generate an update event; reloads the counter and all registers */
-		rEGR(timer) = GTIM_EGR_UG;
-
-		px4_leave_critical_section(flags);
-	}
-
-}
-
-void spix_sync_channel_init(unsigned channel)
-{
-	/* Only initialize used channels */
-
-	if (spix_sync_channels[channel].timer_channel) {
-
-		unsigned timer = spix_sync_channels[channel].timer_index;
-
-		/* configure the GPIO first */
-		px4_arch_configgpio(spix_sync_channels[channel].gpio_out);
-
-		uint16_t polarity = spix_sync_channels[channel].masks;
-
-		/* configure the channel */
-		switch (spix_sync_channels[channel].timer_channel) {
-		case 1:
-			rCCMR1(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR1_OC1M_SHIFT) | GTIM_CCMR1_OC1PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC1E;
-			break;
-
-		case 2:
-			rCCMR1(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR1_OC2M_SHIFT) | GTIM_CCMR1_OC2PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC2E;
-			break;
-
-		case 3:
-			rCCMR2(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR2_OC3M_SHIFT) | GTIM_CCMR2_OC3PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC3E;
-			break;
-
-		case 4:
-			rCCMR2(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR2_OC4M_SHIFT) | GTIM_CCMR2_OC4PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC4E;
-			break;
-		}
-	}
-}
-
-int
-spix_sync_servo_set(unsigned channel, uint8_t  cvalue)
-{
-	if (channel >= arraySize(spix_sync_channels)) {
-		return -1;
-	}
-
-	unsigned timer = spix_sync_channels[channel].timer_index;
-
-	/* test timer for validity */
-	if ((spix_sync_timers[timer].base == 0) ||
-	    (spix_sync_channels[channel].gpio_out == 0)) {
-		return -1;
-	}
-
-	unsigned period = spix_sync_timer_get_period(timer);
-
-	unsigned value = (unsigned)cvalue * period / 255;
-
-	/* configure the channel */
-	if (value > 0) {
-		value--;
-	}
-
-
-	switch (spix_sync_channels[channel].timer_channel) {
-	case 1:
-		rCCR1(timer) = value;
-		break;
-
-	case 2:
-		rCCR2(timer) = value;
-		break;
-
-	case 3:
-		rCCR3(timer) = value;
-		break;
-
-	case 4:
-		rCCR4(timer) = value;
-		break;
-
-	default:
-		return -1;
-	}
-
-	return 0;
-}
-
-unsigned spix_sync_servo_get(unsigned channel)
-{
-	if (channel >= 3) {
-		return 0;
-	}
-
-	unsigned timer = spix_sync_channels[channel].timer_index;
-	uint16_t value = 0;
-
-	/* test timer for validity */
-	if ((spix_sync_timers[timer].base == 0) ||
-	    (spix_sync_channels[channel].timer_channel == 0)) {
-		return 0;
-	}
-
-	/* configure the channel */
-	switch (spix_sync_channels[channel].timer_channel) {
-	case 1:
-		value = rCCR1(timer);
-		break;
-
-	case 2:
-		value = rCCR2(timer);
-		break;
-
-	case 3:
-		value = rCCR3(timer);
-		break;
-
-	case 4:
-		value = rCCR4(timer);
-		break;
-	}
-
-	unsigned period = spix_sync_timer_get_period(timer);
-	return ((value + 1) * 255 / period);
-}
-
-int spix_sync_servo_init(unsigned rate)
-{
-	/* do basic timer initialisation first */
-	for (unsigned i = 0; i < arraySize(spix_sync_timers); i++) {
-		spix_sync_timer_init_timer(i, rate);
-	}
-
-	/* now init channels */
-	for (unsigned i = 0; i < arraySize(spix_sync_channels); i++) {
-		spix_sync_channel_init(i);
-	}
-
-	spix_sync_servo_arm(true);
-	return OK;
-}
-
-void
-spix_sync_servo_deinit(void)
-{
-	/* disable the timers */
-	spix_sync_servo_arm(false);
-}
-void
-spix_sync_servo_arm(bool armed)
-{
-	/* iterate timers and arm/disarm appropriately */
-	for (unsigned i = 0; i < arraySize(spix_sync_timers); i++) {
-		if (spix_sync_timers[i].base != 0) {
-			if (armed) {
-				/* force an update to preload all registers */
-				rEGR(i) = GTIM_EGR_UG;
-
-				/* arm requires the timer be enabled */
-				rCR1(i) |= GTIM_CR1_CEN | GTIM_CR1_ARPE;
-
-			} else {
-				rCR1(i) = 0;
-			}
-		}
-	}
-}

boards/ark/pi6x/default.px4board

@@ -7,8 +7,8 @@ CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
-CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_DRIVERS_CDCACM_AUTOSTART=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_DSHOT=y
@@ -41,6 +41,7 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
+CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y

boards/ark/pi6x/nuttx-config/nsh/defconfig

@@ -14,7 +14,6 @@
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_ARP is not set
 # CONFIG_NSH_DISABLE_CAT is not set
 # CONFIG_NSH_DISABLE_CD is not set
 # CONFIG_NSH_DISABLE_CP is not set
@@ -37,7 +36,6 @@
 # CONFIG_NSH_DISABLE_MKFATFS is not set
 # CONFIG_NSH_DISABLE_MOUNT is not set
 # CONFIG_NSH_DISABLE_MV is not set
-# CONFIG_NSH_DISABLE_NSLOOKUP is not set
 # CONFIG_NSH_DISABLE_PS is not set
 # CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
 # CONFIG_NSH_DISABLE_PWD is not set
@@ -117,8 +115,6 @@ CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_INIT_ENTRYPOINT="nsh_main"
 CONFIG_INIT_STACKSIZE=3194
-CONFIG_IOB_NBUFFERS=24
-CONFIG_IOB_THROTTLE=0
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_MAX_EXITFUNS=1

boards/ark/septentrio-gps/default.px4board

@@ -1,13 +1,13 @@
 CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_ROMFSROOT="cannode"
-CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
+CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
 CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1

boards/ark/septentrio-gps/init/rc.board_sensors

@@ -8,4 +8,7 @@ icm42688p -R 0 -s start
 
 bmp388 -I -b 1 start
 
-bmm150 -I -b 1 start
+if ! iis2mdc -R 4 -I -b 1 start
+then
+	bmm150 -I -b 1 start
+fi

boards/ark/septentrio-gps/src/board_config.h

@@ -47,7 +47,7 @@
 #define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)
 
 /* Safety LED */
-#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
 
 /* Tone alarm output. */
 #define TONE_ALARM_TIMER             2    /* timer 2 */

boards/av/x-v1/nuttx-config/nsh/defconfig

@@ -139,8 +139,8 @@ CONFIG_NETDB_DNSSERVER_NOADDR=y
 CONFIG_NETDEV_PHY_IOCTL=y
 CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
-CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
-CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_DNSIPADDR=0xA290AFE
+CONFIG_NETINIT_DRIPADDR=0xA290AFE
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49
 CONFIG_NETUTILS_TELNETD=y

boards/beaglebone/blue/default.px4board

@@ -14,7 +14,6 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
-CONFIG_DRIVERS_LINUX_PWM_OUT=y
 CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
 CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y

boards/bitcraze/crazyflie/default.px4board

@@ -3,8 +3,8 @@ CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_LPS25H=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y

boards/cuav/nora/default.px4board

@@ -7,10 +7,10 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_COMMON_BAROMETERS=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -39,7 +39,6 @@ CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
 CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
@@ -58,7 +57,6 @@ CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
 CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
@@ -70,7 +68,6 @@ CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
@@ -98,4 +95,3 @@ CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-CONFIG_EXAMPLES_FAKE_GPS=y

boards/cuav/x7pro/default.px4board

@@ -6,11 +6,11 @@ CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/cubepilot/cubeorange/console.px4board

@@ -0,0 +1 @@
+# Same as default, only defconfig is different

boards/cubepilot/cubeorange/nuttx-config/console/defconfig

@@ -0,0 +1,257 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cubepilot/cubeorange/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743ZI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=79954
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x1016
+CONFIG_CDCACM_PRODUCTSTR="CubeOrange"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x2DAE
+CONFIG_CDCACM_VENDORSTR="CubePilot"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_REGIONS=4
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_EMULATE_PAGE_SHIFT=5
+CONFIG_RAMTRON_EMULATE_SECTOR_SHIFT=5
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDMMC1_SDIO_PULLUP=y
+CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_HSECLOCK=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC1=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI1_DMA=y
+CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI4=y
+CONFIG_STM32H7_SPI4_DMA=y
+CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM3=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_SERIAL_CONSOLE=y
+CONFIG_UART7_TXBUFSIZE=1500
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=1500
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_TXBUFSIZE=1500
+CONFIG_USART3_BAUD=57600
+CONFIG_USART3_IFLOWCONTROL=y
+CONFIG_USART3_OFLOWCONTROL=y
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_TXBUFSIZE=3000
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_WATCHDOG=y

boards/cubepilot/cubeorange/nuttx-config/include/board.h

@@ -194,12 +194,6 @@
 
 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */
 
-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2
 

boards/cubepilot/cubeorangeplus/console.px4board

@@ -0,0 +1 @@
+# Same as default, only defconfig is different

boards/cubepilot/cubeorangeplus/nuttx-config/console/defconfig

@@ -22,12 +22,11 @@
 # CONFIG_NSH_DISABLE_ECHO is not set
 # CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
 # CONFIG_NSH_DISABLE_EXPORT is not set
 # CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
 # CONFIG_NSH_DISABLE_HELP is not set
-# CONFIG_NSH_DISABLE_IFCONFIG is not set
-# CONFIG_NSH_DISABLE_IFUPDOWN is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
 # CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
@@ -45,7 +44,6 @@
 # CONFIG_NSH_DISABLE_SET is not set
 # CONFIG_NSH_DISABLE_SLEEP is not set
 # CONFIG_NSH_DISABLE_SOURCE is not set
-# CONFIG_NSH_DISABLE_TELNETD is not set
 # CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
 # CONFIG_NSH_DISABLE_UMOUNT is not set
@@ -53,11 +51,11 @@
 # CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/fpv/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cubepilot/cubeorangeplus/nuttx-config"
 CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="ark"
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
 CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743II=y
+CONFIG_ARCH_CHIP_STM32H747XI=y
 CONFIG_ARCH_CHIP_STM32H7=y
 CONFIG_ARCH_INTERRUPTSTACK=768
 CONFIG_ARCH_STACKDUMP=y
@@ -71,20 +69,19 @@ CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=95751
+CONFIG_BOARD_LOOPSPERMSEC=79954
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_BUILTIN=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x003B
-CONFIG_CDCACM_PRODUCTSTR="ARK FPV.x"
+CONFIG_CDCACM_PRODUCTID=0x1058
+CONFIG_CDCACM_PRODUCTSTR="CubeOrange+"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3185
-CONFIG_CDCACM_VENDORSTR="ARK"
+CONFIG_CDCACM_VENDORID=0x2DAE
+CONFIG_CDCACM_VENDORSTR="CubePilot"
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_TCBINFO=y
 CONFIG_DEFAULT_SMALL=y
@@ -169,7 +166,7 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDMMC2_SDIO_PULLUP=y
+CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
@@ -186,12 +183,10 @@ CONFIG_STM32H7_ADC1=y
 CONFIG_STM32H7_ADC3=y
 CONFIG_STM32H7_BBSRAM=y
 CONFIG_STM32H7_BBSRAM_FILES=5
-CONFIG_STM32H7_BDMA=y
 CONFIG_STM32H7_BKPSRAM=y
 CONFIG_STM32H7_DMA1=y
 CONFIG_STM32H7_DMA2=y
 CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_FLASH_OVERRIDE_I=y
 CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
 CONFIG_STM32H7_I2C1=y
 CONFIG_STM32H7_I2C2=y
@@ -200,30 +195,27 @@ CONFIG_STM32H7_I2C_DYNTIMEO=y
 CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
 CONFIG_STM32H7_OTGFS=y
 CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_PWR_DIRECT_SMPS_SUPPLY=y
 CONFIG_STM32H7_RTC=y
-CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
+CONFIG_STM32H7_RTC_HSECLOCK=y
 CONFIG_STM32H7_RTC_MAGIC_REG=1
 CONFIG_STM32H7_SAVE_CRASHDUMP=y
-CONFIG_STM32H7_SDMMC2=y
+CONFIG_STM32H7_SDMMC1=y
 CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32H7_SPI1=y
 CONFIG_STM32H7_SPI1_DMA=y
 CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI6=y
-CONFIG_STM32H7_SPI6_DMA=y
-CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI4=y
+CONFIG_STM32H7_SPI4_DMA=y
+CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
 CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_TIM2=y
 CONFIG_STM32H7_TIM3=y
 CONFIG_STM32H7_TIM4=y
-CONFIG_STM32H7_TIM5=y
-CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_UART4=y
-CONFIG_STM32H7_UART5=y
 CONFIG_STM32H7_UART7=y
-CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_UART8=y
 CONFIG_STM32H7_USART2=y
 CONFIG_STM32H7_USART3=y
 CONFIG_STM32H7_USART6=y
@@ -234,42 +226,30 @@ CONFIG_STM32H7_USART_SWAP=y
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
 CONFIG_UART4_BAUD=57600
 CONFIG_UART4_RXBUFSIZE=600
 CONFIG_UART4_TXBUFSIZE=1500
-CONFIG_UART5_IFLOWCONTROL=y
-CONFIG_UART5_OFLOWCONTROL=y
-CONFIG_UART5_RXDMA=y
-CONFIG_UART5_RXBUFSIZE=600
-CONFIG_UART5_TXBUFSIZE=10000
-CONFIG_UART5_TXDMA=y
 CONFIG_UART7_BAUD=57600
-CONFIG_UART7_IFLOWCONTROL=y
-CONFIG_UART7_OFLOWCONTROL=y
 CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_RXDMA=y
-CONFIG_UART7_TXBUFSIZE=3000
-CONFIG_UART7_TXDMA=y
-CONFIG_USART1_BAUD=57600
-CONFIG_USART1_RXDMA=y
-CONFIG_USART1_TXDMA=y
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_UART7_SERIAL_CONSOLE=y
+CONFIG_UART7_TXBUFSIZE=1500
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=1500
 CONFIG_USART2_BAUD=57600
-CONFIG_USART2_RXDMA=y
-CONFIG_USART2_TXDMA=y
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
 CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_TXBUFSIZE=1500
 CONFIG_USART3_BAUD=57600
-CONFIG_USART3_RXBUFSIZE=180
-CONFIG_USART3_RXDMA=y
-CONFIG_USART3_SERIAL_CONSOLE=y
-CONFIG_USART3_TXBUFSIZE=1500
-CONFIG_USART3_TXDMA=y
+CONFIG_USART3_IFLOWCONTROL=y
+CONFIG_USART3_OFLOWCONTROL=y
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_TXBUFSIZE=3000
 CONFIG_USART6_BAUD=57600
-CONFIG_USART6_RXDMA=y
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=1500
 CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_TXBUFSIZE=1500
 CONFIG_USBDEV=y

boards/cubepilot/cubeorangeplus/nuttx-config/include/board.h

@@ -195,12 +195,6 @@
 
 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */
 
-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2
 

boards/emlid/navio2/default.px4board

@@ -15,7 +15,6 @@ CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
 CONFIG_DRIVERS_IMU_ST_LSM9DS1=y
-CONFIG_DRIVERS_LINUX_PWM_OUT=y
 CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
 CONFIG_DRIVERS_MAGNETOMETER_LSM9DS1_MAG=y
 CONFIG_DRIVERS_RC_INPUT=y

boards/hkust/nxt-dual/nuttx-config/bootloader/defconfig

@@ -29,14 +29,12 @@ CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004b
 CONFIG_CDCACM_PRODUCTSTR="HKUST UAV NxtPX4"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
-#TODO：ally for VENDOR ID in the future
 CONFIG_CDCACM_VENDORID=0x3162
 CONFIG_CDCACM_VENDORSTR="Matek"
 CONFIG_DEBUG_FULLOPT=y
@@ -77,15 +75,15 @@ CONFIG_STM32H7_OTGFS=y
 CONFIG_STM32H7_PROGMEM=y
 CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_USART6=y #debug port, can be modified to UART8
-CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_TXBUFSIZE=300
+CONFIG_STM32H7_USART6=y
 CONFIG_SYSTEMTICK_HOOK=y
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_TASK_NAME_SIZE=24
 CONFIG_TTY_SIGINT=y
 CONFIG_TTY_SIGINT_CHAR=0x03
 CONFIG_TTY_SIGTSTP=y
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=300
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500

boards/hkust/nxt-dual/nuttx-config/nsh/defconfig

@@ -73,7 +73,6 @@ CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x0036
@@ -82,12 +81,10 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x1B8C
 CONFIG_CDCACM_VENDORSTR="Matek"
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_MEMFAULT=y
 CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=n
 CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
@@ -114,10 +111,10 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_IOB_NBUFFERS=24
-CONFIG_IOB_NCHAINS=24
 CONFIG_INIT_ENTRYPOINT="nsh_main"
 CONFIG_INIT_STACKSIZE=3194
+CONFIG_IOB_NBUFFERS=24
+CONFIG_IOB_NCHAINS=24
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_MAX_EXITFUNS=1
@@ -129,7 +126,6 @@ CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
 CONFIG_MM_IOB=y
 CONFIG_MM_REGIONS=4
-# Avaible in Dual Version TODO: MTD IO error
 CONFIG_MTD=y
 CONFIG_MTD_BYTE_WRITE=y
 CONFIG_MTD_PARTITION=y
@@ -164,7 +160,6 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
@@ -175,7 +170,6 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -191,7 +185,7 @@ CONFIG_START_MONTH=11
 CONFIG_STDIO_BUFFER_SIZE=256
 CONFIG_STM32H7_ADC1=y
 CONFIG_STM32H7_ADC2=y
-CONFIG_STM32H7_ADC3=y #should always enable otherwsie got ADC timeout error this is for tempreature compenstae
+CONFIG_STM32H7_ADC3=y
 CONFIG_STM32H7_BBSRAM=y
 CONFIG_STM32H7_BBSRAM_FILES=5
 CONFIG_STM32H7_BDMA=y
@@ -212,40 +206,28 @@ CONFIG_STM32H7_RTC_HSECLOCK=y
 CONFIG_STM32H7_RTC_MAGIC_REG=1
 CONFIG_STM32H7_SAVE_CRASHDUMP=y
 CONFIG_STM32H7_SDMMC1=y
-CONFIG_STM32H7_SDMMC1_DMA=y
-CONFIG_STM32H7_SDMMC1_DMA_BUFFER=1024
 CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32H7_SPI1=y
-# CONFIG_STM32H7_SPI1_DMA=y
-# CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
 CONFIG_STM32H7_SPI2=y
 CONFIG_STM32H7_SPI2_DMA=y
 CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
 CONFIG_STM32H7_SPI3=y
-# CONFIG_STM32H7_SPI3_DMA=y
-# CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
 CONFIG_STM32H7_SPI4=y
-# CONFIG_STM32H7_SPI4_DMA=y
-# CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_SPI_DMATHRESHOLD=8
 CONFIG_STM32H7_TIM1=y
 CONFIG_STM32H7_TIM2=y
 CONFIG_STM32H7_TIM3=y
 CONFIG_STM32H7_TIM4=y
-# CONFIG_STM32H7_TIM5=y
-# CONFIG_STM32H7_TIM6=y
-# CONFIG_STM32H7_TIM7=y
 CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_USART1=y #ttyS0
-CONFIG_STM32H7_USART2=y #ttyS1
-CONFIG_STM32H7_USART3=y #ttyS2
-CONFIG_STM32H7_UART4=y #ttyS3
-CONFIG_STM32H7_UART5=y #ttyS4
-CONFIG_STM32H7_USART6=y #ttyS5 NC
-CONFIG_STM32H7_UART7=y #ttyS6
-CONFIG_STM32H7_UART8=y #ttyS7
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART5=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
 CONFIG_STM32H7_USART_BREAKS=y
 CONFIG_STM32H7_USART_INVERT=y
 CONFIG_STM32H7_USART_SINGLEWIRE=y
@@ -253,6 +235,20 @@ CONFIG_STM32H7_USART_SWAP=y
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_BAUD=921600
+CONFIG_UART4_RXBUFSIZE=3000
+CONFIG_UART4_RXDMA=y
+CONFIG_UART4_TXBUFSIZE=3000
+CONFIG_UART4_TXDMA=y
+CONFIG_UART5_BAUD=57600
+CONFIG_UART5_RXBUFSIZE=600
+CONFIG_UART5_TXBUFSIZE=1500
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_TXBUFSIZE=3000
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=3000
 CONFIG_USART1_BAUD=57600
 CONFIG_USART1_RXBUFSIZE=600
 CONFIG_USART1_TXBUFSIZE=1500
@@ -262,27 +258,12 @@ CONFIG_USART2_TXBUFSIZE=3000
 CONFIG_USART3_BAUD=57600
 CONFIG_USART3_RXBUFSIZE=180
 CONFIG_USART3_TXBUFSIZE=1500
-CONFIG_UART4_BAUD=921600
-CONFIG_UART4_RXBUFSIZE=3000
-CONFIG_UART4_TXBUFSIZE=3000
-CONFIG_UART4_RXDMA=y
-CONFIG_UART4_TXDMA=y
-CONFIG_UART5_BAUD=57600
-CONFIG_UART5_RXBUFSIZE=600
-CONFIG_UART5_TXBUFSIZE=1500
 CONFIG_USART6_BAUD=57600
 CONFIG_USART6_RXBUFSIZE=180
 CONFIG_USART6_SERIAL_CONSOLE=y
-CONFIG_UART7_BAUD=57600
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_TXBUFSIZE=3000
-CONFIG_UART8_BAUD=57600
-CONFIG_UART8_RXBUFSIZE=600
-CONFIG_UART8_TXBUFSIZE=3000
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
 CONFIG_WATCHDOG=y
 CONFIG_WQUEUE_NOTIFIER=y

boards/hkust/nxt-v1/default.px4board

@@ -17,32 +17,25 @@ CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
-CONFIG_DRIVERS_IMU_INVENSENSE_MPU6500=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
-CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
-CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_IMU_INVENSENSE_MPU6500=y
 CONFIG_DRIVERS_IRLOCK=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
 CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_PWM_OUT_SIM=y
 CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_DRIVERS_RPM=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
-#CONFIG_DRIVERS_UAVCAN=y
-#CONFIG_BOARD_UAVCAN_INTERFACES=1
-#CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_ESC_BATTERY=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
@@ -50,13 +43,13 @@ CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
-# CONFIG_MODULES_FW_POS_CONTROL_L1=y
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
 CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
@@ -66,18 +59,15 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
-CONFIG_MODULES_UXRCE_DDS_CLIENT=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_UXRCE_DDS_CLIENT=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y
@@ -85,13 +75,9 @@ CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
-CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-#CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_PWM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
 CONFIG_SYSTEMCMDS_SD_BENCH=y
 CONFIG_SYSTEMCMDS_SD_STRESS=y

boards/hkust/nxt-v1/nuttx-config/bootloader/defconfig

@@ -29,14 +29,12 @@ CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004b
 CONFIG_CDCACM_PRODUCTSTR="HKUST UAV NxtPX4"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
-#TODO：ally for VENDOR ID in the future
 CONFIG_CDCACM_VENDORID=0x3162
 CONFIG_CDCACM_VENDORSTR="Matek"
 CONFIG_DEBUG_FULLOPT=y

boards/hkust/nxt-v1/nuttx-config/nsh/defconfig

@@ -73,7 +73,6 @@ CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x0036
@@ -82,12 +81,10 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x1B8C
 CONFIG_CDCACM_VENDORSTR="Matek"
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_MEMFAULT=y
 CONFIG_DEBUG_SYMBOLS=y
-CONFIG_DEBUG_TCBINFO=n
 CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
@@ -114,10 +111,10 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_IOB_NBUFFERS=24
-CONFIG_IOB_NCHAINS=24
 CONFIG_INIT_ENTRYPOINT="nsh_main"
 CONFIG_INIT_STACKSIZE=3194
+CONFIG_IOB_NBUFFERS=24
+CONFIG_IOB_NCHAINS=24
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_MAX_EXITFUNS=1
@@ -129,12 +126,6 @@ CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
 CONFIG_MM_IOB=y
 CONFIG_MM_REGIONS=4
-# Avaible in Dual Version
-# CONFIG_MTD=y
-# CONFIG_MTD_BYTE_WRITE=y
-# CONFIG_MTD_PARTITION=y
-# CONFIG_MTD_PROGMEM=y
-# CONFIG_MTD_RAMTRON=y
 CONFIG_NAME_MAX=40
 CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_ARGCAT=y
@@ -155,14 +146,12 @@ CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
 CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
-CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
@@ -173,7 +162,6 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -189,7 +177,7 @@ CONFIG_START_MONTH=11
 CONFIG_STDIO_BUFFER_SIZE=256
 CONFIG_STM32H7_ADC1=y
 CONFIG_STM32H7_ADC2=y
-CONFIG_STM32H7_ADC3=y #should always enable otherwsie got ADC timeout error this is for tempreature compenstae
+CONFIG_STM32H7_ADC3=y
 CONFIG_STM32H7_BBSRAM=y
 CONFIG_STM32H7_BBSRAM_FILES=5
 CONFIG_STM32H7_BDMA=y
@@ -210,8 +198,6 @@ CONFIG_STM32H7_RTC_HSECLOCK=y
 CONFIG_STM32H7_RTC_MAGIC_REG=1
 CONFIG_STM32H7_SAVE_CRASHDUMP=y
 CONFIG_STM32H7_SDMMC1=y
-CONFIG_STM32H7_SDMMC1_DMA=y
-CONFIG_STM32H7_SDMMC1_DMA_BUFFER=1024
 CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
 CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32H7_SPI1=y
@@ -223,19 +209,18 @@ CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
 CONFIG_STM32H7_SPI3=y
 CONFIG_STM32H7_SPI3_DMA=y
 CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_SPI_DMATHRESHOLD=8
 CONFIG_STM32H7_TIM1=y
 CONFIG_STM32H7_TIM3=y
 CONFIG_STM32H7_TIM4=y
 CONFIG_STM32H7_TIM5=y
 CONFIG_STM32H7_TIM8=y
-CONFIG_STM32H7_USART1=y #ttyS0
-CONFIG_STM32H7_USART2=y #ttyS1
-CONFIG_STM32H7_USART3=y #ttyS2
-CONFIG_STM32H7_UART4=y #ttyS3
-CONFIG_STM32H7_UART5=y #ttyS4
-CONFIG_STM32H7_UART7=y #ttyS5
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART5=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
 CONFIG_STM32H7_USART_BREAKS=y
 CONFIG_STM32H7_USART_INVERT=y
 CONFIG_STM32H7_USART_SINGLEWIRE=y
@@ -243,6 +228,15 @@ CONFIG_STM32H7_USART_SWAP=y
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_BAUD=921600
+CONFIG_UART4_RXBUFSIZE=3000
+CONFIG_UART4_TXBUFSIZE=1200
+CONFIG_UART5_BAUD=57600
+CONFIG_UART5_RXBUFSIZE=600
+CONFIG_UART5_TXBUFSIZE=1500
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_TXBUFSIZE=3000
 CONFIG_USART1_BAUD=57600
 CONFIG_USART1_RXBUFSIZE=600
 CONFIG_USART1_TXBUFSIZE=1500
@@ -253,20 +247,9 @@ CONFIG_USART3_BAUD=57600
 CONFIG_USART3_RXBUFSIZE=180
 CONFIG_USART3_SERIAL_CONSOLE=y
 CONFIG_USART3_TXBUFSIZE=1500
-CONFIG_UART4_BAUD=921600
-CONFIG_UART4_RXBUFSIZE=3000
-CONFIG_UART4_TXBUFSIZE=1200
-CONFIG_UART5_BAUD=57600
-CONFIG_UART5_RXBUFSIZE=600
-CONFIG_UART5_TXBUFSIZE=1500
-CONFIG_UART7_BAUD=57600
-CONFIG_UART7_RXBUFSIZE=600
-CONFIG_UART7_TXBUFSIZE=3000
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y
 CONFIG_WQUEUE_NOTIFIER=y

boards/holybro/kakutef7/init/rc.board_defaults

@@ -15,7 +15,7 @@ param set-default SYS_AUTOSTART 4050
 param set-default SYS_HAS_MAG 0
 
 # enable gravity fusion
-param set-default EKF2_IMU_CONTROL 7
+param set-default EKF2_IMU_CTRL 7
 
 # the startup tune is not great on a binary output buzzer, so disable it
 param set-default CBRK_BUZZER 782090