preflight check: enable mode via command

The preflight check can be enabled by switching to nav_state
vehicle_status_s::NAVIGATION_STATE_CS_PREFLIGHT_CHECK using
VEHICLE_CMD_SET_NAV_STATE. Thus we can ditch this function and forgo
adding an extra vehicle command.

.ci/Jenkinsfile-compile

@@ -1,230 +0,0 @@
-#!/usr/bin/env groovy
-
-pipeline {
-  agent none
-  stages {
-
-    stage('Build') {
-      steps {
-        script {
-          def build_nodes = [:]
-          def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2023-06-26",
-            arm64: "px4io/px4-dev-aarch64:2022-08-12",
-            base: "px4io/px4-dev-ros2-foxy:2022-08-12",
-            nuttx: "px4io/px4-dev-nuttx-focal:2022-08-12",
-          ]
-
-          def armhf_builds = [
-            target: ["beaglebone_blue_default", "emlid_navio2_default", "px4_raspberrypi_default", "scumaker_pilotpi_default"],
-            image: docker_images.armhf,
-            archive: false
-          ]
-
-          def arm64_builds = [
-            target: ["scumaker_pilotpi_arm64"],
-            image: docker_images.arm64,
-            archive: false
-          ]
-
-          def base_builds = [
-            target: ["px4_sitl_default"],
-            image: docker_images.base,
-            archive: false
-          ]
-
-          def nuttx_builds_archive = [
-            target: [
-                     "3dr_ctrl-zero-h7-oem-revg_default",
-                     "airmind_mindpx-v2_default",
-                     "ark_can-flow_canbootloader",
-                     "ark_can-flow_default",
-                     "ark_can-gps_canbootloader",
-                     "ark_can-gps_default",
-                     "ark_can-rtk-gps_canbootloader",
-                     "ark_can-rtk-gps_default",
-                     "ark_cannode_canbootloader",
-                     "ark_cannode_default",
-                     "ark_fmu-v6x_bootloader",
-                     "ark_fmu-v6x_default",
-                     "ark_fpv_bootloader",
-                     "ark_fpv_default",
-                     "ark_pi6x_bootloader",
-                     "ark_pi6x_default",
-                     "atl_mantis-edu_default",
-                     "av_x-v1_default",
-                     "bitcraze_crazyflie21_default",
-                     "bitcraze_crazyflie_default",
-                     "cuav_7-nano_default",
-                     "cuav_can-gps-v1_canbootloader",
-                     "cuav_can-gps-v1_default",
-                     "cuav_nora_default",
-                     "cuav_x7pro_default",
-                     "cubepilot_cubeorange_default",
-                     "cubepilot_cubeorangeplus_default",
-                     "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
-                     "flywoo_gn-f405_default",
-                     "freefly_can-rtk-gps_canbootloader",
-                     "freefly_can-rtk-gps_default",
-                     "holybro_can-gps-v1_canbootloader",
-                     "holybro_can-gps-v1_default",
-                     "holybro_durandal-v1_default",
-                     "holybro_kakutef7_default",
-                     "holybro_kakuteh7_default",
-                     "holybro_kakuteh7mini_default",
-                     "holybro_kakuteh7v2_default",
-                     "holybro_pix32v5_default",
-                     "matek_gnss-m9n-f4_canbootloader",
-                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
-                     "micoair_h743_default",
-                     "modalai_fc-v1_default",
-                     "modalai_fc-v2_default",
-                     "mro_ctrl-zero-classic_default",
-                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-f7_default",
-                     "mro_ctrl-zero-h7-oem_default",
-                     "mro_ctrl-zero-h7_default",
-                     "mro_pixracerpro_default",
-                     "mro_x21-777_default",
-                     "mro_x21_default",
-                     "nxp_fmuk66-e_default",
-                     "nxp_fmuk66-e_socketcan",
-                     "nxp_fmuk66-v3_default",
-                     "nxp_fmuk66-v3_socketcan",
-                     "nxp_mr-canhubk3_default",
-                     "nxp_ucans32k146_canbootloader",
-                     "nxp_ucans32k146_default",
-                     "omnibus_f4sd_default",
-                     "px4_fmu-v2_default",
-                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
-                     "px4_fmu-v2_multicopter",
-                     "px4_fmu-v2_rover",
-                     "px4_fmu-v3_default",
-                     "px4_fmu-v4_default",
-                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
-                     "px4_fmu-v5_debug",
-                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
-                     "px4_fmu-v5_rover",
-                     "px4_fmu-v5_stackcheck",
-                     "px4_fmu-v5_uavcanv0periph",
-                     "px4_fmu-v5x_default",
-                     "px4_fmu-v5x_rover",
-                     "px4_fmu-v6c_default",
-                     "px4_fmu-v6c_rover",
-                     "px4_fmu-v6u_default",
-                     "px4_fmu-v6u_rover",
-                     "px4_fmu-v6x_default",
-                     "px4_fmu-v6x_rover",
-                     "px4_fmu-v6xrt_bootloader",
-                     "px4_fmu-v6xrt_default",
-                     "px4_fmu-v6xrt_rover",
-                     "px4_io-v2_default",
-                     "raspberrypi_pico_default",
-                     "siyi_n7_default",
-                     "sky-drones_smartap-airlink_default",
-                     "spracing_h7extreme_default",
-                     "thepeach_k1_default",
-                     "thepeach_r1_default",
-                     "uvify_core_default",
-                     "x-mav_ap-h743v2_default",
-                     "zeroone_x6_bootloader",
-                     "zeroone_x6_default",
-            ],
-            image: docker_images.nuttx,
-            archive: true
-          ]
-
-          def docker_builds = [
-            armhf_builds, base_builds, nuttx_builds_archive
-          ]
-
-          for (def build_type = 0; build_type < docker_builds.size(); build_type++) {
-            for (def build_target = 0; build_target < docker_builds[build_type].target.size(); build_target++) {
-              build_nodes.put(docker_builds[build_type].target[build_target],
-                createBuildNode(docker_builds[build_type].archive, docker_builds[build_type].image, docker_builds[build_type].target[build_target])
-                )
-            }
-          }
-
-        parallel build_nodes
-
-        } // script
-      } // steps
-    } // stage Build
-
-    // TODO: actually upload artifacts to S3
-    // stage('S3 Upload') {
-    //   agent {
-    //     docker { image 'px4io/px4-dev-base-focal:2021-09-08' }
-    //   }
-    //   options {
-    //         skipDefaultCheckout()
-    //   }
-    //   when {
-    //     anyOf {
-    //       branch 'master'
-    //       branch 'beta'
-    //       branch 'stable'
-    //       branch 'pr-jenkins' // for testing
-    //     }
-    //   }
-    //   steps {
-    //     sh 'echo "uploading to S3"'
-    //   }
-    // }
-
-  } // stages
-  environment {
-    CCACHE_DIR = '/tmp/ccache'
-    CI = true
-  }
-  options {
-    buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
-    timeout(time: 120, unit: 'MINUTES')
-  }
-}
-
-def createBuildNode(Boolean archive, String docker_image, String target) {
-  return {
-
-    bypass_entrypoint = ''
-
-    node {
-      docker.withRegistry('https://registry.hub.docker.com', 'docker_hub_dagar') {
-        docker.image(docker_image).inside('-e CCACHE_BASEDIR=${WORKSPACE} -v ${CCACHE_DIR}:${CCACHE_DIR}:rw' + bypass_entrypoint) {
-          stage(target) {
-            try {
-              sh('export')
-              checkout(scm)
-              sh('make distclean; git clean -ff -x -d .')
-              sh('git fetch --tags')
-              sh('ccache -s')
-              sh('make ' + target)
-              sh('ccache -s')
-              sh('make sizes')
-              if (archive) {
-                archiveArtifacts(allowEmptyArchive: false, artifacts: 'build/*/*.px4, build/*/*.elf, build/*/*.bin', fingerprint: true, onlyIfSuccessful: true)
-              }
-              sh('make ' + target + ' package')
-              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.tar.bz2', fingerprint: true, onlyIfSuccessful: true)
-              archiveArtifacts(allowEmptyArchive: true, artifacts: 'build/*/*.deb', fingerprint: true, onlyIfSuccessful: true)
-            }
-            catch (exc) {
-              throw (exc)
-            }
-            finally {
-              sh('make distclean; git clean -ff -x -d .')
-            }
-          }
-        }
-      }
-    }
-  }
-}

.ci/Jenkinsfile-hardware

@@ -1,904 +0,0 @@
-#!/usr/bin/env groovy
-
-pipeline {
-  agent none
-  stages {
-    stage('Hardware Test') {
-
-      parallel {
-
-        stage("cubepilot_cubeorange_test") {
-          stages {
-            stage("build cubepilot_cubeorange_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make cubepilot_cubeorange_bootloader'
-                sh 'make cubepilot_cubeorange_test'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*, build/cubepilot_cubeorange_test/etc/init.d/airframes/*', name: 'cubepilot_cubeorange_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'cubepilot_cubeorange'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'cubepilot_cubeorange_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_bootloader/cubepilot_cubeorange_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    // run tests
-                    runTests()
-
-                    // load all airframes
-                    // sh("./Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` `cd build/cubepilot_cubeorange_test/etc/init.d/airframes/; find . -regex '.*/[0-9].*' -exec basename {} \\; | cut -d '_' -f 1` || true") // test loading all airframes\
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("cuav_x7pro_test") {
-          stages {
-            stage("build cuav_x7pro_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make cuav_x7pro_bootloader'
-                sh 'make cuav_x7pro_test'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'cuav_x7pro_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'cuav_x7pro'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'cuav_x7pro_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_bootloader/cuav_x7pro_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v4_test") {
-          stages {
-            stage("build px4_fmu-v4_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v4_test'
-                sh 'make px4_fmu-v4_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v4'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v4pro_test") {
-          stages {
-            stage("build px4_fmu-v4pro_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v4pro_test'
-                sh 'make px4_fmu-v4pro_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v4pro_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v4pro'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4pro_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v5_debug") {
-          stages {
-            stage("build px4_fmu-v5_debug") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v5_debug'
-                sh 'make px4_fmu-v5_debug bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_debug'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v5'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_debug'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600 || true'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
-
-                    // test dataman
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-                    checkStatus()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v5_stackcheck") {
-          stages {
-            stage("build px4_fmu-v5_stackcheck") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v5_stackcheck'
-                sh 'make px4_fmu-v5_stackcheck bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_stackcheck'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v5'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_stackcheck'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save" || true'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
-
-                    // test dataman
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests dataman" --ignore-stdout-errors'
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'   // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-                    checkStatus()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("px4_fmu-v5_test") {
-          stages {
-            stage("build px4_fmu-v5_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v5_test'
-                sh 'make px4_fmu-v5_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v5'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-        stage("nxp_fmuk66-v3_test") {
-          stages {
-            stage("build nxp_fmuk66-v3_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2022-08-12'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make nxp_fmuk66-v3_test'
-                //sh 'make nxp_fmuk66-v3_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'nxp_fmuk66-v3_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'nxp_fmuk66-v3'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'nxp_fmuk66-v3_test'
-                    //sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
-      } // parallel
-    } // stage Hardware Test
-  } // stages
-  environment {
-    CCACHE_DIR = '/tmp/ccache'
-    CCACHE_NOHASHDIR = 1
-    CI = true
-  }
-  options {
-    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
-    timeout(time: 180, unit: 'MINUTES')
-    skipDefaultCheckout()
-  }
-}
-
-void checkoutSCM() {
-  retry(3) {
-    checkout scm
-    sh 'export'
-    sh 'make distclean; git clean -ff -x -d .'
-    sh 'git fetch --tags'
-    sh 'ccache -z'
-  }
-}
-
-void quickCalibrate() {
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters before
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
-}
-
-void checkStatus() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-
-  // status commands
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ps"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "pwm_out status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-}
-
-void resetParameters() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param reset_all"'
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "CBRK_BUZZER" --value "782097"'
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SDLOG_DIRS_MAX" --value "1"'
-}
-
-void runTests() {
-
-  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'
-
-  resetParameters()
-
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
-  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during test
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink_tests" || true' // TODO
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params" || true' // expected to fail after erase
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
-
-  // tests (stop modules first)
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander stop"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink stop-all"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "navigator stop"'
-  sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'
-
-  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
-}
-
-void printTopics() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
-
-  // these are for casually inspecting the system, output failure doesn't matter
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_0" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_1" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_controls_2" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_outputs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_validated" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener airspeed_wind" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener commander_state" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_odometry" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_optical_flow_vel" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_states" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_status_flags" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_wind" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener event" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener heater_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener input_rc" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener led_control" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener log_message" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener logger_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener manual_control_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mavlink_log" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener mission" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener multirotor_motor_limits" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener optical_flow" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener parameter_update" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_controller_landing_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener position_setpoint_triplet" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener radio_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener rate_ctrl_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener safety" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fft" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_preflight_mag" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener task_stack_info" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener trajectory_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener tune_control" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_acceleration" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_air_data" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_command_ack" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_control_mode" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_land_detected" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_magnetometer" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_odometry" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_rates_setpoint" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener failsafe_flags" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vtol_vehicle_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener yaw_estimator_status" || true'
-}
-
-void resetBoard() {
-  resetParameters()
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-}

.github/workflows/build_all_targets.yml

@@ -6,11 +6,6 @@
 name: Build all targets
 
 on:
-  workflow_dispatch:
-    inputs:
-      tag:
-        required: true
-        description: release version
   push:
     tags:
       - 'v*'
@@ -27,7 +22,7 @@ jobs:
   group_targets:
     name: Scan for Board Targets
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     outputs:
       matrix: ${{ steps.set-matrix.outputs.matrix }}
       timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
@@ -36,6 +31,10 @@ jobs:
     steps:
       - uses: actions/checkout@v4
 
+      - name: Update python packaging to avoid canonicalize_version() error
+        run: |
+            pip3 install -U packaging
+
       - name: Install Python Dependencies
         uses: py-actions/py-dependency-install@v4
         with:
@@ -47,34 +46,24 @@ jobs:
       - id: set-timestamp
         run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
 
-      # This job is also triggered with versioned tags
-      #   Creating a and pushing a tag starting with "v" just as "v1.0.0"
-      #   will trigger this workflow and when all builds are done create a Github Release
-      #   then it will upload all binaries built as assets
-      # Additionally, we can also trigger this step manually
-      #   From the Github Actions tab for this repository:
-      #   https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml
-      #   You can now click a "Run Workflow" button that will prompt you for a tag name
-      #   This tag name has to match an existing tag otherwise the new release will be detached
-      #   Note: Only developers with "write" permission to the repository can use this feature
-      - id: set-tag
-        if: startsWith(github.ref, 'refs/tags/v') || github.event_name == 'workflow_dispatch'
-        run: echo "::set-output name=tagname::${{ github.event_name == 'workflow_dispatch' && inputs.tag || github.ref_name }}"
-
       - id: set-branch
         run: echo "::set-output name=branchname::${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}"
 
       - name: Debug Matrix Output
         if: runner.debug == '1'
-        run: echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
+        run: |
+          echo "${{ steps.set-timestamp.outputs.timestamp }}"
+          echo "${{ steps.set-branch.outputs.branchname }}"
+          echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"
 
   setup:
     name: Build Group [${{ matrix.group }}]
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     needs: group_targets
     strategy:
       matrix: ${{ fromJson(needs.group_targets.outputs.matrix) }}
+      fail-fast: false
     container:
       image: ${{ matrix.container }}
     steps:
@@ -123,7 +112,7 @@ jobs:
   artifacts:
     name: Upload Artifacts to S3
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     needs: [setup, group_targets]
     if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
     steps:
@@ -152,22 +141,18 @@ jobs:
   release:
     name: Create Release and Upload Artifacts
     # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/v') || github.event_name == 'workflow_dispatch'
+    if: startsWith(github.ref, 'refs/tags/v')
     steps:
       - name: Download Artifacts
         uses: actions/download-artifact@v4
-
-      - name: Arrange Binaries
-        run: |
-          mkdir artifacts
-          cp **/**/*.px4 artifacts/
+        with:
+          path: artifacts/
+          merge-multiple: true
 
       - name: Upload Binaries to Release
         uses: softprops/action-gh-release@v2
         with:
-          name: ${{ needs.group_targets.outputs.tagname }}
-          tag_name: ${{ needs.group_targets.outputs.tagname }}
           draft: true
           files: artifacts/*.px4

.github/workflows/checks.yml

@@ -25,28 +25,27 @@ jobs:
           "NO_NINJA_BUILD=1 px4_fmu-v5_default",
           "NO_NINJA_BUILD=1 px4_sitl_default",
           "px4_sitl_allyes",
-          "airframe_metadata",
           "module_documentation",
-          "parameters_metadata",
         ]
-    container:
-      image: px4io/px4-dev-nuttx-focal:2022-08-12
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
 
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: ${{matrix.check}}
-      run: make ${{matrix.check}}
-    - name: upload coverage
-      if: contains(matrix.check, 'coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: unittests
-        file: coverage/lcov.info
+      - name: Building [${{ matrix.check }}]
+        uses: addnab/docker-run-action@v3
+        with:
+          image: px4io/px4-dev-nuttx-focal:2022-08-12
+          options: -v ${{ github.workspace }}:/workspace
+          run: |
+            cd /workspace
+            git config --global --add safe.directory /workspace
+            make ${{ matrix.check }}
+
+      - name: Uploading Coverage to Codecov.io
+        if: contains(matrix.check, 'coverage')
+        uses: codecov/codecov-action@v1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          flags: unittests
+          file: coverage/lcov.info

.github/workflows/clang-tidy.yml

@@ -11,11 +11,17 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-clang:2021-09-08
     steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
       with:
-        token: ${{secrets.ACCESS_TOKEN}}
+        fetch-depth: 0
 
-    - name: make clang-tidy-quiet
-      run: make clang-tidy-quiet
+    - name: Testing (clang-tidy-quiet)
+      uses: addnab/docker-run-action@v3
+      with:
+        image: px4io/px4-dev-clang:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make clang-tidy-quiet

.github/workflows/compile_macos.yml

@@ -19,13 +19,11 @@ jobs:
           ]
     steps:
     - name: install Python 3.10
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
       with:
         python-version: "3.10"
 
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
+    - uses: actions/checkout@v4
 
     - name: setup
       run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
@@ -37,7 +35,7 @@ jobs:
         string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
         message("::set-output name=timestamp::${current_date}")
     - name: ccache cache files
-      uses: actions/cache@v2
+      uses: actions/cache@v4
       with:
         path: ~/.ccache
         key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}

.github/workflows/compile_ubuntu.yml

@@ -0,0 +1,46 @@
+name: Ubuntu environment build
+
+on:
+  push:
+    branches:
+      - 'main'
+      - 'stable'
+      - 'beta'
+      - 'release/**'
+  pull_request:
+    branches:
+      - '*'
+
+jobs:
+  build_and_test:
+    name: Build and Test
+    strategy:
+      fail-fast: false
+      matrix:
+        version: ['ubuntu:22.04', 'ubuntu:24.04']
+    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
+    container:
+      image: ${{ matrix.version }}
+      volumes:
+        - /github/workspace:/github/workspace
+    steps:
+
+      - name: Fix git in container
+        run: |
+          # we only need this because we are running the job in a container
+          # when checkout pulls git it does it in a shared volume
+          # and file ownership changes between steps
+          # first we install git since its missing from the base image
+          # then we mark the directory as safe for other instances
+          # of git to use.
+          apt update && apt install git -y
+          git config --global --add safe.directory $(realpath .)
+
+      - uses: actions/checkout@v4
+
+      - name: Install Deps, Build, and Make Quick Check
+        run: |
+          # we need to install dependencies and build on the same step
+          # given the stateless nature of docker images
+          ./Tools/setup/ubuntu.sh
+          make quick_check

.github/workflows/dev_container.yml

@@ -0,0 +1,101 @@
+
+name: Container build
+
+on:
+  push:
+    branches:
+      - 'main'
+      - 'stable'
+      - 'beta'
+      - 'release/**'
+    tags:
+      - 'v*'
+  pull_request:
+    branches:
+      - '*'
+
+jobs:
+  build:
+    name: Build and Push Container
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-tags: true
+          submodules: false
+          fetch-depth: 0
+
+      - name: Set PX4 Tag
+        id: px4-tag
+        run: |
+          echo "tag=$(git describe --tags --match 'v[0-9]*')" >> $GITHUB_OUTPUT
+
+      - name: Login to Docker Hub
+        uses: docker/login-action@v3
+        if: github.event_name != 'pull_request'
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v3
+        with:
+          registry: ghcr.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Extract metadata (tags, labels) for Docker
+        id: meta
+        uses: docker/metadata-action@v5
+        with:
+          images: |
+            ghcr.io/PX4/px4-dev
+            ${{ (github.event_name != 'pull_request') && 'px4io/px4-dev' || '' }}
+          tags: |
+            type=raw,enable=true,value=${{ steps.px4-tag.outputs.tag }},priority=1000
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v3
+
+      - name: Build and load container image
+        uses: docker/build-push-action@v6
+        id: docker
+        with:
+          context: Tools/setup
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+          platforms: |
+            linux/amd64
+          load: true
+          push: false
+          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
+          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max
+
+      - name: Get Tag Name
+        id: tag_name
+        run: |
+          echo "::set-output name=tag_name::$(echo '${{ fromJSON(steps.docker.outputs.metadata)['image.name'] }}' | sed 's/,.*$//')"
+
+      - name: make quick_check
+        uses: addnab/docker-run-action@v3
+        with:
+          image: ${{ steps.tag_name.outputs.tag_name }}
+          options: -v ${{ github.workspace }}:/workspace
+          run: |
+            cd /workspace
+            git config --global --add safe.directory /workspace
+            make px4_sitl_default
+            make px4_fmu-v6x_default
+
+      - name: Push container image
+        uses: docker/build-push-action@v6
+        with:
+          context: Tools/setup
+          tags: ${{ steps.meta.outputs.tags }}
+          labels: ${{ steps.meta.outputs.labels }}
+          platforms: |
+            linux/amd64
+          provenance: mode=max
+          push: true
+          cache-from: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }}
+          cache-to: type=s3,blobs_prefix=cache/${{ github.repository }}/,manifests_prefix=cache/${{ github.repository }}/,region=${{ env.RUNS_ON_AWS_REGION }},bucket=${{ env.RUNS_ON_S3_BUCKET_CACHE }},mode=max

.github/workflows/ekf_functional_change_indicator.yml

@@ -1,21 +1,28 @@
 name: EKF Change Indicator
 
-on: pull_request
+on:
+  pull_request:
+    branches:
+    - '*'
 
 jobs:
   unit_tests:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
-    - uses: actions/checkout@v2.3.1
+    - uses: actions/checkout@v4
       with:
         fetch-depth: 0
-    - name: checkout newest version of branch
-      run: |
-        git fetch origin pull/${{github.event.pull_request.number}}/head:${{github.head_ref}}
-        git checkout ${GITHUB_HEAD_REF}
+
     - name: main test
-      run: make tests TESTFILTER=EKF
+      uses: addnab/docker-run-action@v3
+      with:
+        image: px4io/px4-dev-base-focal:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make tests TESTFILTER=EKF
+
     - name: Check if there is a functional change
       run: git diff --exit-code
       working-directory: src/modules/ekf2/test/change_indication

.github/workflows/ekf_update_change_indicator.yml

@@ -5,25 +5,40 @@ on: push
 jobs:
   unit_tests:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
     env:
       GIT_COMMITTER_EMAIL: bot@px4.io
       GIT_COMMITTER_NAME: PX4BuildBot
     steps:
-    - uses: actions/checkout@v2.3.1
+    - uses: actions/checkout@v4
       with:
         fetch-depth: 0
-    - name: main test updates change indication files
-      run: make tests TESTFILTER=EKF
+
+    - name: main test
+      uses: addnab/docker-run-action@v3
+      with:
+        image: px4io/px4-dev-base-focal:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make tests TESTFILTER=EKF
+
     - name: Check if there exists diff and save result in variable
-      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_ENV
+      id: diff-check
+      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_OUTPUT
       working-directory: src/modules/ekf2/test/change_indication
+
     - name: auto-commit any changes to change indication
       uses: stefanzweifel/git-auto-commit-action@v4
       with:
-        commit_message: '[AUTO COMMIT] update change indication'
+        file_pattern: 'src/modules/ekf2/test/change_indication/*.csv'
         commit_user_name: ${GIT_COMMITTER_NAME}
         commit_user_email: ${GIT_COMMITTER_EMAIL}
-    - if: ${{env.CHANGE_INDICATED}}
-      name: if there is a functional change, fail check
+        commit_message: |
+          '[AUTO COMMIT] update change indication'
+
+          See .github/workflopws/ekf_update_change_indicator.yml for more details
+
+    - name: if there is a functional change, fail check
+      if: ${{ steps.diff-check.outputs.CHANGE_INDICATED }}
       run: exit 1

.github/workflows/failsafe_sim.yml

@@ -24,21 +24,23 @@ jobs:
       image: px4io/px4-dev-nuttx-focal:2022-08-12
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+      - name: Install Node v20.18.0
+        uses: actions/setup-node@v4
+        with:
+          node-version: 20.18.0
 
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: install emscripten
-      run: |
-        git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
-        cd _emscripten_sdk
-        ./emsdk install latest
-        ./emsdk activate latest
-    - name: ${{matrix.check}}
-      run: |
-        . ./_emscripten_sdk/emsdk_env.sh
-        make ${{matrix.check}}
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: Install empscripten
+        run: |
+          git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
+          cd _emscripten_sdk
+          ./emsdk install latest
+          ./emsdk activate latest
+
+      - name: Testing [${{ matrix.check }}]
+        run: |
+          . ./_emscripten_sdk/emsdk_env.sh
+          make ${{ matrix.check }}

.github/workflows/flash_analysis.yml

@@ -0,0 +1,141 @@
+name: FLASH usage analysis
+
+on:
+  push:
+    branches:
+      - 'main'
+  pull_request:
+    branches:
+      - '*'
+
+env:
+  MIN_FLASH_POS_DIFF_FOR_COMMENT: 50
+  MIN_FLASH_NEG_DIFF_FOR_COMMENT: -50
+
+jobs:
+  analyze_flash:
+    name: Analyzing ${{ matrix.target }}
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    container:
+      image: px4io/px4-dev-nuttx-focal
+    strategy:
+      matrix:
+        target: [px4_fmu-v5x, px4_fmu-v6x]
+    outputs:
+      px4_fmu-v5x-bloaty-output: ${{ steps.gen-output.outputs.px4_fmu-v5x-bloaty-output }}
+      px4_fmu-v5x-bloaty-summary-map: ${{ steps.gen-output.outputs.px4_fmu-v5x-bloaty-summary-map }}
+      px4_fmu-v6x-bloaty-output: ${{ steps.gen-output.outputs.px4_fmu-v6x-bloaty-output }}
+      px4_fmu-v6x-bloaty-summary-map: ${{ steps.gen-output.outputs.px4_fmu-v6x-bloaty-summary-map }}
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+          submodules: recursive
+
+      - name: Git ownership workaround
+        run: git config --system --add safe.directory '*'
+
+      - name: Build Target
+        run: make ${{ matrix.target }}_flash-analysis
+
+      - name: Store the ELF with the change
+        run: cp ./build/**/*.elf ./with-change.elf
+
+      - name: Clean previous build
+        run: |
+          make clean
+          make distclean
+
+      - name: If it's a PR checkout the base branch
+        if: ${{ github.event.pull_request }}
+        # As checkout creates a merge commit (merging the base branch into the PR branch), the base branch is the base for a diff of the PR changes.
+        run: git checkout ${{ github.event.pull_request.base.ref }}
+
+      - name: If it's a push checkout the previous commit
+        if: github.event_name == 'push'
+        run: git checkout ${{ github.event.before }}
+
+      - name: Update submodules
+        run: make submodulesupdate
+
+      - name: Build
+        run: make ${{ matrix.target }}_flash-analysis
+
+      - name: Store the ELF before the change
+        run: cp ./build/**/*.elf ./before-change.elf
+
+      - name: bloaty-action
+        uses: PX4/bloaty-action@v1.0.0
+        id: bloaty-step
+        with:
+          bloaty-file-args: ./with-change.elf -- ./before-change.elf
+          bloaty-additional-args: -d sections,compileunits -s vm -n 20
+          output-to-summary: true
+
+      - name: Generate output
+        id: gen-output
+        run: |
+          EOF=$(dd if=/dev/urandom bs=15 count=1 status=none | base64)
+          echo "${{ matrix.target }}-bloaty-output<<$EOF" >> $GITHUB_OUTPUT
+          echo "${{ steps.bloaty-step.outputs.bloaty-output-encoded }}" >> $GITHUB_OUTPUT
+          echo "$EOF" >> $GITHUB_OUTPUT
+          echo "${{ matrix.target }}-bloaty-summary-map<<$EOF" >> $GITHUB_OUTPUT
+          echo '${{ steps.bloaty-step.outputs.bloaty-summary-map }}' >> $GITHUB_OUTPUT
+          echo "$EOF" >> $GITHUB_OUTPUT
+
+  post_pr_comment:
+    name: Publish Results
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    needs: [analyze_flash]
+    env:
+      V5X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-absolute) }}
+      V5X-SUMMARY-MAP-PERC: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-percentage) }}
+      V6X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-summary-map).vm-absolute) }}
+      V6X-SUMMARY-MAP-PERC: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-summary-map).vm-percentage) }}
+    if: ${{ github.event.pull_request }}
+    steps:
+      - name: Find Comment
+        uses: peter-evans/find-comment@v3
+        id: fc
+        with:
+          issue-number: ${{ github.event.pull_request.number }}
+          comment-author: 'github-actions[bot]'
+          body-includes: FLASH Analysis
+
+      - name: Set Build Time
+        id: bt
+        run: |
+          echo "timestamp=$(date +'%Y-%m-%dT%H:%M:%S')" >> $GITHUB_OUTPUT
+
+      - name: Create or update comment
+        # This can't be moved to the job-level conditions, as GH actions don't allow a job-level if condition to access the env.
+        if: |
+          steps.fc.outputs.comment-id != '' ||
+          env.V5X-SUMMARY-MAP-ABS >= fromJSON(env.MIN_FLASH_POS_DIFF_FOR_COMMENT) ||
+          env.V5X-SUMMARY-MAP-ABS <= fromJSON(env.MIN_FLASH_NEG_DIFF_FOR_COMMENT) ||
+          env.V6X-SUMMARY-MAP-ABS >= fromJSON(env.MIN_FLASH_POS_DIFF_FOR_COMMENT) ||
+          env.V6X-SUMMARY-MAP-ABS <= fromJSON(env.MIN_FLASH_NEG_DIFF_FOR_COMMENT)
+        uses: peter-evans/create-or-update-comment@v4
+        with:
+          comment-id: ${{ steps.fc.outputs.comment-id }}
+          issue-number: ${{ github.event.pull_request.number }}
+          body: |
+            ## 🔎 FLASH Analysis
+            <details>
+              <summary>px4_fmu-v5x [Total VM Diff: ${{ env.V5X-SUMMARY-MAP-ABS }} byte (${{ env.V5X-SUMMARY-MAP-PERC}} %)]</summary>
+
+              ```
+              ${{ needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-output }}
+              ```
+            </details>
+
+            <details>
+              <summary>px4_fmu-v6x [Total VM Diff: ${{ env.V6X-SUMMARY-MAP-ABS }} byte (${{ env.V6X-SUMMARY-MAP-PERC }} %)]</summary>
+
+              ```
+              ${{ needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-output }}
+              ```
+            </details>
+
+            **Updated: _${{ steps.bt.outputs.timestamp }}_**
+          edit-mode: replace

.github/workflows/mavros_mission_tests.yml

@@ -11,131 +11,26 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
     strategy:
       fail-fast: false
       matrix:
         config:
-          - {vehicle: "iris",          mission: "MC_mission_box",  build_type: "RelWithDebInfo"}
-          - {vehicle: "rover",         mission: "rover_mission_1", build_type: "RelWithDebInfo"}
-          #- {vehicle: "plane",         mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
-          #- {vehicle: "plane_catapult",mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
-          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "Coverage"}
-          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "AddressSanitizer"}
-          #- {vehicle: "tailsitter",    mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
-          #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
+          - {vehicle: "iris",          mission: "MC_mission_box"}
+          - {vehicle: "rover",         mission: "rover_mission_1"}
 
-    container:
-      image: px4io/px4-dev-ros-melodic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
       with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+        fetch-depth: 0
 
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
+    - name: Build SITL and Run Tests
+      uses: addnab/docker-run-action@v3
       with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
-      timeout-minutes: 45
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: coredump
-        path: px4.core
-
-    - name: ecl EKF analysis
-      if: always()
-      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_mission
-        file: coverage/lcov.info
+        image: px4io/px4-dev-ros-melodic:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make px4_sitl_default
+          make px4_sitl_default sitl_gazebo-classic
+          ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}

.github/workflows/mavros_offboard_tests.yml

@@ -17,120 +17,21 @@ jobs:
       fail-fast: false
       matrix:
         config:
-          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
-          #- {test_file: "mavros_posix_tests_offboard_attctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
-          #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
+          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris"}
 
-    container:
-      image: px4io/px4-dev-ros-melodic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
       with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+        fetch-depth: 0
 
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
+    - name: Build PX4 and Run Tests
+      uses: addnab/docker-run-action@v3
       with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
-      timeout-minutes: 45
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: coredump
-        path: px4.core
-
-    - name: ecl EKF analysis
-      if: always()
-      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_offboard
-        file: coverage/lcov.info
+        image: px4io/px4-dev-ros-melodic:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make px4_sitl_default
+          make px4_sitl_default sitl_gazebo-classic
+          ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}

.github/workflows/nuttx_env_config.yml

@@ -11,22 +11,27 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2022-08-12
     strategy:
       matrix:
         config: [
-          px4_fmu-v5,
+          px4_fmu-v5_default,
           ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
 
-    - name: make ${{matrix.config}}
-      env:
-        PX4_EXTRA_NUTTX_CONFIG: "CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
-      run: |
-        echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
-        make ${{matrix.config}} nuttx_context
-        # Check that the config option is set
-        grep CONFIG_NSH_LOGIN_PASSWORD build/${{matrix.config}}_default/NuttX/nuttx/.config
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+
+    - name: Build PX4 and Run Test [${{ matrix.config }}]
+      uses: addnab/docker-run-action@v3
+      with:
+        image: px4io/px4-dev-nuttx-focal:2022-08-12
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          export PX4_EXTRA_NUTTX_CONFIG="CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
+          echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
+          make ${{ matrix.config }} nuttx_context
+          echo "Check that the config option is set"
+          grep CONFIG_NSH_LOGIN_PASSWORD build/${{ matrix.config }}/NuttX/nuttx/.config

.github/workflows/python_checks.yml

@@ -12,14 +12,18 @@ jobs:
   build:
     runs-on: ubuntu-24.04
     steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
       with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+        fetch-depth: 0
+
     - name: Install Python3
       run: sudo apt-get install python3 python3-setuptools python3-pip -y
+
     - name: Install tools
       run: python3 -m pip install mypy types-requests flake8 --break-system-packages
+
     - name: Check MAVSDK test scripts with mypy
       run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
+
     - name: Check MAVSDK test scripts with flake8
       run: $HOME/.local/bin/flake8 test/mavsdk_tests/*.py

.github/workflows/sitl_tests.yml

@@ -16,7 +16,7 @@ on:
 jobs:
   build:
     name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
+    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
     container:
       image: px4io/px4-dev-simulation-focal:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined

.vscode/cmake-variants.yaml

@@ -131,6 +131,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-flow_canbootloader
+    ark_can-flow-mr_canbootloader:
+      short: ark_can-flow-mr_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-flow-mr_canbootloader
     ark_can-gps_default:
       short: ark_can-gps_default
       buildType: MinSizeRel
@@ -166,6 +171,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_septentrio-gps_canbootloader
+    ark_teseo-gps_canbootloader:
+      short: ark_teseo-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_teseo-gps_canbootloader
     ark_cannode_default:
       short: ark_cannode_default
       buildType: MinSizeRel
@@ -301,11 +311,36 @@ CONFIG:
       buildType: MiniSizeRel
       settings:
         CONFIG: matek_gnss-m9n-f4_default
+    micoair_h743_bootloader:
+      short: micoair_h743_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743_bootloader
     micoair_h743_default:
       short: micoair_h743
       buildType: MinSizeRel
       settings:
         CONFIG: micoair_h743_default
+    micoair_h743-aio_bootloader:
+      short: micoair_h743-aio_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-aio_bootloader
+    micoair_h743-aio_default:
+      short: micoair_h743-aio
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-aio_default
+    micoair_h743-v2_bootloader:
+      short: micoair_h743-v2_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-v2_bootloader
+    micoair_h743-v2_default:
+      short: micoair_h743-v2
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-v2_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel
@@ -356,6 +391,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_mr-canhubk3_fmu
+    nxp_tropic-community_default:
+      short: nxp_tropic-community_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_tropic-community_default
     raspberrypi_pico_default:
       short: raspberrypi_pico
       buildType: MinSizeRel

.vscode/settings.json

@@ -129,5 +129,4 @@
         "yaml.schemas": {
                 "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
         },
-        "ros.distro": "humble"
 }

CMakeLists.txt

@@ -408,8 +408,15 @@ include(px4_add_gtest)
 if(BUILD_TESTING)
 	include(gtest)
 
+	# Ensure there's no -R without any filter expression since that trips newer ctest versions
+	if(TESTFILTER)
+		set(TESTFILTERARG "-R")
+	else()
+		set(TESTFILTERARG "")
+	endif()
+
 	add_custom_target(test_results
-			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test -R ${TESTFILTER} USES_TERMINAL
+			COMMAND GTEST_COLOR=1 ${CMAKE_CTEST_COMMAND} --output-on-failure -T Test ${TESTFILTERARG} ${TESTFILTER}
 			DEPENDS
 				px4
 				examples__dyn_hello

Jenkinsfile

@@ -231,9 +231,13 @@ pipeline {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
               // 'main' branch
               sh('rm -f px4_msgs/msg/*.msg')
+              sh('rm -f px4_msgs/msg/versioned/*.msg')
               sh('rm -f px4_msgs/srv/*.srv')
+              sh('rm -f px4_msgs/srv/versioned/*.srv')
               sh('cp msg/*.msg px4_msgs/msg/')
+              sh('mkdir -p px4_msgs/msg/versioned && cp msg/versioned/*.msg px4_msgs/msg/versioned/')
               sh('cp srv/*.srv px4_msgs/srv/')
+              sh('mkdir -p px4_msgs/srv/versioned && cp srv/versioned/*.srv px4_msgs/srv/versioned/')
               sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
               sh('cd px4_msgs; git push origin main || true')
               sh('rm -rf px4_msgs')

Makefile

@@ -343,6 +343,8 @@ bootloaders_update: \
 	matek_h743-mini_bootloader \
 	matek_h743-slim_bootloader \
         micoair_h743_bootloader \
+        micoair_h743-aio_bootloader \
+	micoair_h743-v2_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \

README.md

@@ -2,7 +2,7 @@
 
 [![Releases](https://img.shields.io/github/release/PX4/PX4-Autopilot.svg)](https://github.com/PX4/PX4-Autopilot/releases) [![DOI](https://zenodo.org/badge/22634/PX4/PX4-Autopilot.svg)](https://zenodo.org/badge/latestdoi/22634/PX4/PX4-Autopilot)
 
-[![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
+[![Build Targets](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml/badge.svg?branch=main)](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
 
 [![Discord Shield](https://discordapp.com/api/guilds/1022170275984457759/widget.png?style=shield)](https://discord.gg/dronecode)
 
@@ -104,7 +104,7 @@ These boards fully comply with Pixhawk Standard, and are maintained by the PX4-A
 
 These boards are maintained to be compatible with PX4-Autopilot by the Manufacturers.
 
-* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/arkv6x.html)
+* [ARK Electronics ARKV6X](https://docs.px4.io/main/en/flight_controller/ark_v6x.html)
 * [CubePilot Cube Orange+](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orangeplus.html)
 * [CubePilot Cube Orange](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_orange.html)
 * [CubePilot Cube Yellow](https://docs.px4.io/main/en/flight_controller/cubepilot_cube_yellow.html)

ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx

@@ -16,10 +16,6 @@ param set-default SENS_EN_GPSSIM 1
 param set-default SENS_EN_BAROSIM 1
 param set-default SENS_EN_MAGSIM 1
 
-# disable some checks to allow to fly:
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 # Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 1
@@ -38,4 +34,6 @@ param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 
+param set-default EKF2_GPS_DELAY 0
+
 param set SIH_VEHICLE_TYPE 0

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -16,12 +16,6 @@ param set-default SENS_EN_BAROSIM 1
 param set-default SENS_EN_MAGSIM 1
 param set-default SENS_EN_ARSPDSIM 1
 
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 param set-default SIH_T_MAX 6
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
@@ -33,19 +27,22 @@ param set-default SIH_KDV 0.2
 param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
 param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
 
-
 param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
 
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
 param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
 param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3
+param set-default CA_SV_CS1_TYPE 3  # elevator
 param set-default CA_SV_CS2_TRQ_Y 1
-param set-default CA_SV_CS2_TYPE 4
-param set-default PWM_MAIN_FUNC3 201
-param set-default PWM_MAIN_FUNC4 202
-param set-default PWM_MAIN_FUNC5 203
-param set-default PWM_MAIN_FUNC6 101
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 202
+param set-default PWM_MAIN_FUNC3 203
+param set-default PWM_MAIN_FUNC4 101
+
+param set-default EKF2_GPS_DELAY 0

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -11,6 +11,7 @@
 PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
 
+param set-default EKF2_GPS_DELAY 0
 param set-default EKF2_FUSE_BETA 0 # side slip fusion is currently not supported for tailsitters
 
 param set-default SENS_EN_GPSSIM 1
@@ -27,10 +28,6 @@ param set-default MC_PITCH_P 5
 
 param set-default MAV_TYPE 19
 
-# disable some checks to allow to fly:
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 param set-default SIH_T_MAX 2
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2

ROMFS/px4fmu_common/init.d-posix/airframes/10043_sihsim_standard_vtol

@@ -0,0 +1,96 @@
+#!/bin/sh
+#
+# @name SIH Standard VTOL
+#
+# @type Simulation
+# @class VTOL
+#
+# @output Motor1 MC motor front right
+# @output Motor2 MC motor back left
+# @output Motor3 MC motor front left
+# @output Motor4 MC motor back right
+# @output Motor5 Forward thrust motor
+# @output Servo1 Ailerons (single channel)
+# @output Servo2 Elevator
+# @output Servo3 Rudder
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=standard_vtol}
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 1
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 1
+
+param set-default EKF2_GPS_DELAY 0
+
+param set-default VT_TYPE 2
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR0_PX 0.2
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR1_PX -0.2
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_ROTOR2_PX 0.2
+param set-default CA_ROTOR2_PY -0.2
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.2
+param set-default CA_ROTOR3_PY 0.2
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_PX -0.3
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
+param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TYPE 3  # elevator
+param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 10
+param set-default FW_AIRSPD_MAX 12
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 201
+param set-default PWM_MAIN_FUNC6 202
+param set-default PWM_MAIN_FUNC7 203
+param set-default PWM_MAIN_FUNC8 105
+
+param set-default MAV_TYPE 22
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+# param set-default SYS_HITL 2
+
+param set-default SENS_DPRES_OFF 0.001
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.2
+
+# sih as standard vtol
+param set SIH_VEHICLE_TYPE 3

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam.post

@@ -0,0 +1 @@
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna

@@ -24,33 +24,33 @@ param set-default FW_LND_ANG 8
 param set-default NPFG_PERIOD 12
 
 param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.5
+param set-default FW_PR_FF 0.2
 param set-default FW_PR_I 0.5
 param set-default TRIM_PITCH -0.15
 
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
 param set-default FW_RR_FF 0.5
-param set-default FW_RR_P 0.3
-param set-default FW_RR_I 0.5
+param set-default FW_RR_P 0.4
+param set-default FW_RR_I 0.7
 
-param set-default FW_YR_FF 0.5
-param set-default FW_YR_P 0.6
-param set-default FW_YR_I 0.5
+param set-default FW_R_RMAX 56.15
+
+param set-default FW_YR_FF 0.3
+param set-default FW_YR_P 1.3
+param set-default FW_YR_I 0.7
+
+param set-default FW_PSP_OFF 0
+param set-default FW_P_LIM_MIN -15
 
 param set-default FW_SPOILERS_LND 0.4
 
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_CLMB_MAX 5
+param set-default FW_T_SINK_MAX 3.5
+param set-default FW_T_SINK_MIN 3
 
 param set-default FW_W_EN 1
 
+param set-default FD_ESCS_EN 0
+
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision

@@ -75,7 +75,6 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
-param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -13,22 +13,22 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 
 # Rover parameters
 param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAN_YAW_SCALE 0.1
-param set-default RD_MAX_ACCEL 6
+param set-default RD_MAX_ACCEL 5
+param set-default RD_MAX_DECEL 10
 param set-default RD_MAX_JERK 30
-param set-default RD_MAX_THR_YAW_R 5
-param set-default RD_YAW_RATE_P 0.1
-param set-default RD_YAW_RATE_I 0
+param set-default RD_MAX_THR_YAW_R 1.5
+param set-default RD_YAW_RATE_P 0.25
+param set-default RD_YAW_RATE_I 0.01
 param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0
-param set-default RD_MAX_SPEED 5
-param set-default RD_MAX_THR_SPD 7
-param set-default RD_SPEED_P 1
-param set-default RD_SPEED_I 0
+param set-default RD_YAW_I 0.1
+param set-default RD_MAX_SPEED 2
+param set-default RD_MAX_THR_SPD 2.15
+param set-default RD_SPEED_P 0.1
+param set-default RD_SPEED_I 0.01
 param set-default RD_MAX_YAW_RATE 180
-param set-default RD_MISS_SPD_DEF 5
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
+param set-default RD_MAX_YAW_ACCEL 1000
 
 # Pure pursuit parameters
 param set-default PP_LOOKAHD_MAX 30
@@ -43,13 +43,13 @@ param set-default SENS_EN_ARSPDSIM 0
 
 # Actuator mapping
 param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_MIN1 70
+param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100
 
 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
+param set-default SIM_GZ_WH_MIN2 70
+param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100
 
 param set-default SIM_GZ_WH_REV 1 # reverse right wheel

ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower

@@ -21,7 +21,6 @@ param set-default COM_ARM_WO_GPS 1
 
 # Rover parameters
 param set-default RD_WHEEL_TRACK 0.9
-param set-default RD_MAN_YAW_SCALE 0.1
 param set-default RD_YAW_RATE_I 0.1
 param set-default RD_YAW_RATE_P 5
 param set-default RD_MAX_ACCEL 1
@@ -30,7 +29,6 @@ param set-default RD_MAX_SPEED 8
 param set-default RD_YAW_P 5
 param set-default RD_YAW_I 0.1
 param set-default RD_MAX_YAW_RATE 30
-param set-default RD_MISS_SPD_DEF 8
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
 
@@ -62,19 +60,25 @@ param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
 # controls in practical scenarios.
 
 # Cutter deck blades clutch, PCA9685 servo channel 3,  "RC FLAPS" (406) - leftmost switch, or "Servo 3" (203):
-param set-default SIM_GZ_SV_FUNC3 203
-param set-default SIM_GZ_SV_MIN3 0
-param set-default SIM_GZ_SV_MAX3 1000
-param set-default SIM_GZ_SV_DIS3 500
-param set-default SIM_GZ_SV_FAIL3 500
+param set-default SIM_GZ_SV_FUNC1 201
+param set-default SIM_GZ_SV_MIN1 0
+param set-default SIM_GZ_SV_MAX1 1000
+param set-default SIM_GZ_SV_DIS1 500
+param set-default SIM_GZ_SV_FAIL1 500
+param set-default SIM_GZ_SV_MAXA1 90
+param set-default SIM_GZ_SV_MINA1 -90
 
 # Gas engine throttle, PCA9685 servo channel 4, "RC AUX1" (407) - left knob, or "Servo 4" (204):
 #    - on minimum when disarmed or failed:
-param set-default SIM_GZ_SV_FUNC4 204
-param set-default SIM_GZ_SV_MIN4 0
-param set-default SIM_GZ_SV_MAX4 1000
-param set-default SIM_GZ_SV_DIS4 500
-param set-default SIM_GZ_SV_FAIL4 500
+param set-default SIM_GZ_SV_FUNC2 202
+param set-default SIM_GZ_SV_MIN2 0
+param set-default SIM_GZ_SV_MAX2 1000
+param set-default SIM_GZ_SV_DIS2 500
+param set-default SIM_GZ_SV_FAIL2 500
+param set-default SIM_GZ_SV_MAXA2 90
+param set-default SIM_GZ_SV_MINA2 -90
+
+param set-default CA_SV_CS_COUNT 2
 
 # Controlling PCA9685 servos 5,6,7,8 directly via "Servo 5..8" setting, by publishing actuator_servos.control[]:
 

ROMFS/px4fmu_common/init.d-posix/airframes/4012_gz_rover_ackermann

@@ -15,16 +15,18 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default NAV_ACC_RAD 0.5
 param set-default RA_ACC_RAD_GAIN 2
 param set-default RA_ACC_RAD_MAX 3
-param set-default RA_MAX_ACCEL 1.5
+param set-default RA_LAT_ACCEL_I 0.01
+param set-default RA_LAT_ACCEL_P 0.1
+param set-default RA_MAX_ACCEL 3
+param set-default RA_MAX_DECEL 6
 param set-default RA_MAX_JERK 15
+param set-default RA_MAX_LAT_ACCEL 4
 param set-default RA_MAX_SPEED 3
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_MAX_STR_RATE 360
-param set-default RA_MISS_VEL_DEF 3
-param set-default RA_MISS_VEL_GAIN 5
-param set-default RA_MISS_VEL_MIN 1
+param set-default RA_MAX_THR_SPEED 3.1
 param set-default RA_SPEED_I 0.01
-param set-default RA_SPEED_P 2
+param set-default RA_SPEED_P 0.1
 param set-default RA_WHEEL_BASE 0.321
 
 # Pure Pursuit parameters
@@ -45,5 +47,8 @@ param set-default SIM_GZ_WH_MAX1 200
 param set-default SIM_GZ_WH_DIS1 100
 
 # Steering
+param set-default SIM_GZ_SV_MAXA1 30
+param set-default SIM_GZ_SV_MINA1 -30
+param set-default CA_SV_CS_COUNT 1
 param set-default SIM_GZ_SV_FUNC1 201
 param set-default SIM_GZ_SV_REV 1

ROMFS/px4fmu_common/init.d-posix/airframes/4013_gz_x500_lidar_2d

@@ -1,10 +1,10 @@
 #!/bin/sh
 #
-# @name Gazebo x500 lidar
+# @name Gazebo x500 lidar 2d
 #
 # @type Quadrotor
 #
 
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_2d}
 
 . ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4015_gz_r1_rover_mecanum

@@ -13,18 +13,18 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 
 # Rover parameters
 param set-default RM_WHEEL_TRACK 0.3
-param set-default RM_MAN_YAW_SCALE 0.1
-param set-default RM_YAW_RATE_I 0
-param set-default RM_YAW_RATE_P 0.01
+param set-default RM_YAW_RATE_I 0.1
+param set-default RM_YAW_RATE_P 0.1
 param set-default RM_MAX_ACCEL 3
+param set-default RM_MAX_DECEL 5
 param set-default RM_MAX_JERK 5
-param set-default RM_MAX_SPEED 4
-param set-default RM_MAX_THR_SPD 7
-param set-default RM_MAX_THR_YAW_R 7.5
+param set-default RM_MAX_SPEED 2
+param set-default RM_MAX_THR_SPD 2.2
+param set-default RM_MAX_THR_YAW_R 1.2
 param set-default RM_YAW_P 5
 param set-default RM_YAW_I 0.1
-param set-default RM_MAX_YAW_RATE 180
-param set-default RM_MISS_SPD_DEF 3
+param set-default RM_MAX_YAW_RATE 120
+param set-default RM_MAX_YAW_ACCEL 240
 param set-default RM_MISS_VEL_GAIN 1
 param set-default RM_SPEED_I 0.01
 param set-default RM_SPEED_P 0.1
@@ -42,23 +42,23 @@ param set-default SENS_EN_ARSPDSIM 0
 
 # Actuator mapping
 param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_MIN1 70
+param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100
 
 param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
+param set-default SIM_GZ_WH_MIN2 70
+param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100
 
 param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
-param set-default SIM_GZ_WH_MIN3 0
-param set-default SIM_GZ_WH_MAX3 200
+param set-default SIM_GZ_WH_MIN3 70
+param set-default SIM_GZ_WH_MAX3 130
 param set-default SIM_GZ_WH_DIS3 100
 
 param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
-param set-default SIM_GZ_WH_MIN4 0
-param set-default SIM_GZ_WH_MAX4 200
+param set-default SIM_GZ_WH_MIN4 70
+param set-default SIM_GZ_WH_MAX4 130
 param set-default SIM_GZ_WH_DIS4 100
 
 param set-default SIM_GZ_WH_REV 10

ROMFS/px4fmu_common/init.d-posix/airframes/4016_gz_x500_lidar_down

@@ -0,0 +1,10 @@
+#!/bin/sh
+#
+# @name Gazebo x500 lidar down
+#
+# @type Quadrotor
+#
+
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_down}
+
+. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4017_gz_x500_lidar_front

@@ -0,0 +1,10 @@
+#!/bin/sh
+#
+# @name Gazebo x500 lidar front
+#
+# @type Quadrotor
+#
+
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar_front}
+
+. ${R}etc/init.d-posix/airframes/4001_gz_x500

ROMFS/px4fmu_common/init.d-posix/airframes/4018_gz_quadtailsitter

@@ -0,0 +1,97 @@
+#!/bin/sh
+#
+# @name Quadrotor + Tailsitter
+#
+# @type VTOL Quad Tailsitter
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadtailsitter}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 0
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 0
+
+
+param set-default MAV_TYPE 20
+
+param set-default CA_AIRFRAME 4
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.23
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.23
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.23
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.23
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 0
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+
+param set-default SIM_GZ_EC_MIN1 10
+param set-default SIM_GZ_EC_MIN2 10
+param set-default SIM_GZ_EC_MIN3 10
+param set-default SIM_GZ_EC_MIN4 10
+
+param set-default SIM_GZ_EC_MAX1 1500
+param set-default SIM_GZ_EC_MAX2 1500
+param set-default SIM_GZ_EC_MAX3 1500
+param set-default SIM_GZ_EC_MAX4 1500
+
+param set-default FD_FAIL_R 70
+
+param set-default FW_P_TC 0.6
+
+param set-default FW_PR_I 0.3
+param set-default FW_PR_P 0.5
+param set-default FW_PSP_OFF 2
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_I 0.1
+param set-default FW_RR_P 0.2
+param set-default FW_YR_FF 0 # make yaw rate controller very weak, only keep default P
+param set-default FW_YR_I 0
+param set-default FW_THR_TRIM 0.35
+param set-default FW_THR_MAX 0.8
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_CLMB_MAX 6
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 3
+param set-default FW_T_SINK_MIN 1.6
+param set-default FW_AIRSPD_STALL 10
+param set-default FW_AIRSPD_MIN 14
+param set-default FW_AIRSPD_TRIM 18
+param set-default FW_AIRSPD_MAX 22
+
+param set-default MC_AIRMODE 2
+param set-default MAN_ARM_GESTURE 0 # required for yaw airmode
+param set-default MC_ROLL_P 3
+param set-default MC_PITCH_P 3
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_PITCHRATE_P 0.3
+
+param set-default VT_ARSP_TRANS 15
+param set-default VT_B_TRANS_DUR 5
+param set-default VT_FW_DIFTHR_EN 7
+param set-default VT_FW_DIFTHR_S_Y 1
+param set-default VT_F_TRANS_DUR 1.5
+param set-default VT_TYPE 0
+
+param set-default WV_EN 0
+
+param set-default EKF2_FUSE_BETA 0

ROMFS/px4fmu_common/init.d-posix/airframes/4019_gz_x500_gimbal

@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Gazebo x500 gimbal
+#
+# @type Quadrotor
+#
+
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_gimbal}
+
+. ${R}etc/init.d-posix/airframes/4001_gz_x500
+
+# Gimbal settings
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_RC_IN_MODE 1
+
+param set-default MNT_MAN_ROLL 1
+param set-default MNT_MAN_PITCH 2
+param set-default MNT_MAN_YAW 3
+
+param set-default MNT_RANGE_ROLL 180
+param set-default MNT_RANGE_PITCH 180
+param set-default MNT_RANGE_YAW 720

ROMFS/px4fmu_common/init.d-posix/airframes/4020_gz_tiltrotor

@@ -0,0 +1,112 @@
+#!/bin/sh
+#
+# @name VTOL Tiltrotor
+#
+# @type VTOL Tiltrotor
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=tiltrotor}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 0
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 0
+
+param set-default MAV_TYPE 21
+
+param set-default CA_AIRFRAME 3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR2_TILT 2
+param set-default CA_SV_TL0_MAXA 90
+param set-default CA_SV_TL0_MINA 0
+param set-default CA_SV_TL0_TD 0
+param set-default CA_SV_TL0_CT 1
+param set-default CA_SV_TL1_MAXA 90
+param set-default CA_SV_TL1_MINA 0
+param set-default CA_SV_TL1_TD 0
+param set-default CA_SV_TL1_CT 1
+
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_TL_COUNT 2
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+
+param set-default SIM_GZ_EC_MIN1 10
+param set-default SIM_GZ_EC_MIN2 10
+param set-default SIM_GZ_EC_MIN3 10
+param set-default SIM_GZ_EC_MIN4 10
+
+param set-default SIM_GZ_EC_MAX1 1500
+param set-default SIM_GZ_EC_MAX2 1500
+param set-default SIM_GZ_EC_MAX3 1500
+param set-default SIM_GZ_EC_MAX4 1500
+
+param set-default SIM_GZ_SV_FUNC1 201
+param set-default SIM_GZ_SV_FUNC2 202
+param set-default SIM_GZ_SV_FUNC3 203
+param set-default SIM_GZ_SV_FUNC4 204
+param set-default SIM_GZ_SV_FUNC5 205
+
+param set-default SIM_GZ_SV_MAXA4 90
+param set-default SIM_GZ_SV_MINA4 0
+param set-default SIM_GZ_SV_MAXA5 90
+param set-default SIM_GZ_SV_MINA5 0
+
+param set-default NPFG_PERIOD 12
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_TRIM 0.38
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default MC_AIRMODE 1
+param set-default MC_YAWRATE_P 0.4
+param set-default MC_YAWRATE_I 0.1
+
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_FWD_THRUST_SC 0.6
+param set-default VT_TILT_TRANS 0.6
+param set-default VT_TYPE 1

ROMFS/px4fmu_common/init.d-posix/airframes/71001_gazebo-classic_spacecraft_dart

@@ -0,0 +1,155 @@
+#!/bin/sh
+#
+# @name 6DoF Spacecraft Model
+#
+# @type Freeflyer with 8 thrusters
+#
+# @maintainer Pedro Roque <padr@kth.se>
+#
+
+. ${R}etc/init.d/rc.sc_defaults
+
+param set-default CA_AIRFRAME 15
+param set-default MAV_TYPE 99
+
+param set-default CA_THRUSTER_CNT 12
+param set-default CA_R_REV 0
+
+# param set-default FW_ARSP_MODE 1
+
+# Auto to be provided by Custom Airframe
+param set-default CA_METHOD 0
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+param set-default COM_POSCTL_NAVL 2
+
+# Set thrusters
+param set-default CA_THRUSTER0_PX -0.50
+param set-default CA_THRUSTER0_PY 0.50
+param set-default CA_THRUSTER0_PZ 0.0
+param set-default CA_THRUSTER0_CT 0.237
+param set-default CA_THRUSTER0_AX 0.0
+param set-default CA_THRUSTER0_AY -1.0
+param set-default CA_THRUSTER0_AZ 0.0
+
+param set-default CA_THRUSTER1_PX 0.50
+param set-default CA_THRUSTER1_PY 0.50
+param set-default CA_THRUSTER1_PZ 0.0
+param set-default CA_THRUSTER1_CT 0.237
+param set-default CA_THRUSTER1_AX 0.0
+param set-default CA_THRUSTER1_AY -1.0
+param set-default CA_THRUSTER1_AZ 0.0
+
+param set-default CA_THRUSTER2_PX 0.50
+param set-default CA_THRUSTER2_PY -0.50
+param set-default CA_THRUSTER2_PZ 0.0
+param set-default CA_THRUSTER2_CT 0.237
+param set-default CA_THRUSTER2_AX 0.0
+param set-default CA_THRUSTER2_AY 1.0
+param set-default CA_THRUSTER2_AZ 0.0
+
+param set-default CA_THRUSTER3_PX -0.50
+param set-default CA_THRUSTER3_PY -0.50
+param set-default CA_THRUSTER3_PZ 0.0
+param set-default CA_THRUSTER3_CT 0.237
+param set-default CA_THRUSTER3_AX 0.0
+param set-default CA_THRUSTER3_AY 1.0
+param set-default CA_THRUSTER3_AZ 0.0
+
+param set-default CA_THRUSTER4_PX -0.50
+param set-default CA_THRUSTER4_PY 0.0
+param set-default CA_THRUSTER4_PZ -0.50
+param set-default CA_THRUSTER4_CT 0.237
+param set-default CA_THRUSTER4_AX 1.0
+param set-default CA_THRUSTER4_AY 0.0
+param set-default CA_THRUSTER4_AZ 0.0
+
+param set-default CA_THRUSTER5_PX 0.50
+param set-default CA_THRUSTER5_PY 0.0
+param set-default CA_THRUSTER5_PZ -0.50
+param set-default CA_THRUSTER5_CT 0.237
+param set-default CA_THRUSTER5_AX -1.0
+param set-default CA_THRUSTER5_AY 0.0
+param set-default CA_THRUSTER5_AZ 0.0
+
+param set-default CA_THRUSTER6_PX 0.50
+param set-default CA_THRUSTER6_PY 0.0
+param set-default CA_THRUSTER6_PZ 0.50
+param set-default CA_THRUSTER6_CT 0.237
+param set-default CA_THRUSTER6_AX -1.0
+param set-default CA_THRUSTER6_AY 0.0
+param set-default CA_THRUSTER6_AZ 0.0
+
+param set-default CA_THRUSTER7_PX -0.50
+param set-default CA_THRUSTER7_PY 0.0
+param set-default CA_THRUSTER7_PZ 0.50
+param set-default CA_THRUSTER7_CT 0.237
+param set-default CA_THRUSTER7_AX 1.0
+param set-default CA_THRUSTER7_AY 0.0
+param set-default CA_THRUSTER7_AZ 0.0
+
+param set-default CA_THRUSTER8_PX 0.0
+param set-default CA_THRUSTER8_PY -0.50
+param set-default CA_THRUSTER8_PZ -0.50
+param set-default CA_THRUSTER8_CT 0.237
+param set-default CA_THRUSTER8_AX 0.0
+param set-default CA_THRUSTER8_AY 0.0
+param set-default CA_THRUSTER8_AZ 1.0
+
+param set-default CA_THRUSTER9_PX 0.0
+param set-default CA_THRUSTER9_PY 0.50
+param set-default CA_THRUSTER9_PZ -0.50
+param set-default CA_THRUSTER9_CT 0.237
+param set-default CA_THRUSTER9_AX 0.0
+param set-default CA_THRUSTER9_AY 0.0
+param set-default CA_THRUSTER9_AZ 1.0
+
+param set-default CA_THRUSTER10_PX 0.0
+param set-default CA_THRUSTER10_PY 0.50
+param set-default CA_THRUSTER10_PZ 0.50
+param set-default CA_THRUSTER10_CT 0.237
+param set-default CA_THRUSTER10_AX 0.0
+param set-default CA_THRUSTER10_AY 0.0
+param set-default CA_THRUSTER10_AZ -1.0
+
+param set-default CA_THRUSTER11_PX 0.0
+param set-default CA_THRUSTER11_PY -0.50
+param set-default CA_THRUSTER11_PZ 0.50
+param set-default CA_THRUSTER11_CT 0.237
+param set-default CA_THRUSTER11_AX 0.0
+param set-default CA_THRUSTER11_AY 0.0
+param set-default CA_THRUSTER11_AZ -1.0
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+param set-default PWM_MAIN_FUNC7 107
+param set-default PWM_MAIN_FUNC8 108
+param set-default PWM_MAIN_FUNC9 109
+param set-default PWM_MAIN_FUNC10 110
+param set-default PWM_MAIN_FUNC11 111
+param set-default PWM_MAIN_FUNC12 112
+
+# PWM Simulation
+param set PWM_SIM_PWM_MAX 10000
+param set PWM_SIM_PWM_MIN 0
+
+# Controller Tunings
+param set-default SC_ROLLRATE_P 0.14
+param set-default SC_PITCHRATE_P 0.14
+param set-default SC_ROLLRATE_I 0.3
+param set-default SC_PITCHRATE_I 0.3
+param set-default SC_ROLLRATE_D 0.004
+param set-default SC_PITCHRATE_D 0.004

ROMFS/px4fmu_common/init.d-posix/airframes/71002_gz_spacecraft_2d

@@ -0,0 +1,149 @@
+#!/bin/sh
+#
+# @name 3DoF Spacecraft Model
+#
+# @type 2D Freeflyer with 8 thrusters - Planar motion
+#
+# @maintainer Pedro Roque <padr@kth.se>
+#
+
+. ${R}etc/init.d/rc.sc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=spacecraft_2d}
+
+param set-default SIM_GZ_EN 1
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 1
+param set-default SENS_EN_MAGSIM 1
+param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
+param set-default FD_ESCS_EN 0 # We don't have ESCs - but maybe we need this later?
+
+param set-default CA_AIRFRAME 14
+param set-default MAV_TYPE 99
+
+param set-default CA_THRUSTER_CNT 8
+param set-default CA_R_REV 0
+
+# param set-default FW_ARSP_MODE 1
+
+# Auto to be provided by Custom Airframe
+param set-default CA_METHOD 0  # 0 is PseudoInverse, 3 is Metric
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+param set-default COM_POSCTL_NAVL 2
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+param set-default CA_THRUSTER0_PX -0.12
+param set-default CA_THRUSTER0_PY -0.12
+param set-default CA_THRUSTER0_PZ 0.0
+param set-default CA_THRUSTER0_CT 1.4
+param set-default CA_THRUSTER0_AX 1.0
+param set-default CA_THRUSTER0_AY 0.0
+param set-default CA_THRUSTER0_AZ 0.0
+
+param set-default CA_THRUSTER1_PX 0.12
+param set-default CA_THRUSTER1_PY -0.12
+param set-default CA_THRUSTER1_PZ 0.0
+param set-default CA_THRUSTER1_CT 1.4
+param set-default CA_THRUSTER1_AX -1.0
+param set-default CA_THRUSTER1_AY 0.0
+param set-default CA_THRUSTER1_AZ 0.0
+
+param set-default CA_THRUSTER2_PX -0.12
+param set-default CA_THRUSTER2_PY 0.12
+param set-default CA_THRUSTER2_PZ 0.0
+param set-default CA_THRUSTER2_CT 1.4
+param set-default CA_THRUSTER2_AX 1.0
+param set-default CA_THRUSTER2_AY 0.0
+param set-default CA_THRUSTER2_AZ 0.0
+
+param set-default CA_THRUSTER3_PX 0.12
+param set-default CA_THRUSTER3_PY 0.12
+param set-default CA_THRUSTER3_PZ 0.0
+param set-default CA_THRUSTER3_CT 1.4
+param set-default CA_THRUSTER3_AX -1.0
+param set-default CA_THRUSTER3_AY 0.0
+param set-default CA_THRUSTER3_AZ 0.0
+
+param set-default CA_THRUSTER4_PX 0.12
+param set-default CA_THRUSTER4_PY -0.12
+param set-default CA_THRUSTER4_PZ 0.0
+param set-default CA_THRUSTER4_CT 1.4
+param set-default CA_THRUSTER4_AX 0.0
+param set-default CA_THRUSTER4_AY 1.0
+param set-default CA_THRUSTER4_AZ 0.0
+
+param set-default CA_THRUSTER5_PX 0.12
+param set-default CA_THRUSTER5_PY 0.12
+param set-default CA_THRUSTER5_PZ 0.0
+param set-default CA_THRUSTER5_CT 1.4
+param set-default CA_THRUSTER5_AX 0.0
+param set-default CA_THRUSTER5_AY -1.0
+param set-default CA_THRUSTER5_AZ 0.0
+
+param set-default CA_THRUSTER6_PX -0.12
+param set-default CA_THRUSTER6_PY -0.12
+param set-default CA_THRUSTER6_PZ 0.0
+param set-default CA_THRUSTER6_CT 1.4
+param set-default CA_THRUSTER6_AX 0.0
+param set-default CA_THRUSTER6_AY 1.0
+param set-default CA_THRUSTER6_AZ 0.0
+
+param set-default CA_THRUSTER7_PX -0.12
+param set-default CA_THRUSTER7_PY 0.12
+param set-default CA_THRUSTER7_PZ 0.0
+param set-default CA_THRUSTER7_CT 1.4
+param set-default CA_THRUSTER7_AX 0.0
+param set-default CA_THRUSTER7_AY -1.0
+param set-default CA_THRUSTER7_AZ 0.0
+
+param set-default SIM_GZ_TH_FUNC1 101
+param set-default SIM_GZ_TH_FUNC2 102
+param set-default SIM_GZ_TH_FUNC3 103
+param set-default SIM_GZ_TH_FUNC4 104
+param set-default SIM_GZ_TH_FUNC5 105
+param set-default SIM_GZ_TH_FUNC6 106
+param set-default SIM_GZ_TH_FUNC7 107
+param set-default SIM_GZ_TH_FUNC8 108
+
+param set-default SIM_GZ_TH_MIN1 0
+param set-default SIM_GZ_TH_MIN2 0
+param set-default SIM_GZ_TH_MIN3 0
+param set-default SIM_GZ_TH_MIN4 0
+param set-default SIM_GZ_TH_MIN5 0
+param set-default SIM_GZ_TH_MIN6 0
+param set-default SIM_GZ_TH_MIN7 0
+param set-default SIM_GZ_TH_MIN8 0
+
+param set-default SIM_GZ_TH_MAX1 10000
+param set-default SIM_GZ_TH_MAX2 10000
+param set-default SIM_GZ_TH_MAX3 10000
+param set-default SIM_GZ_TH_MAX4 10000
+param set-default SIM_GZ_TH_MAX5 10000
+param set-default SIM_GZ_TH_MAX6 10000
+param set-default SIM_GZ_TH_MAX7 10000
+param set-default SIM_GZ_TH_MAX8 10000
+
+# Controller Tunings
+param set SC_YAWRATE_P 3.335
+param set SC_YAWRATE_I 0.87
+param set SC_YAWRATE_D 0.15
+param set SC_YR_INT_LIM 0.2
+param set SC_YAW_P 3.0
+
+param set SPC_POS_P 0.20
+param set SPC_VEL_P 6.55
+param set SPC_VEL_I 0.0
+param set SPC_VEL_D 0.0
+param set SPC_VEL_MAX 12.0

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -49,6 +49,7 @@ px4_add_romfs_files(
 	1022_gazebo-classic_uuv_bluerov2_heavy
 	1030_gazebo-classic_plane
 	1031_gazebo-classic_plane_cam
+	1031_gazebo-classic_plane_cam.post
 	1032_gazebo-classic_plane_catapult
 	1033_jsbsim_rascal
 	1034_flightgear_rascal-electric
@@ -84,9 +85,14 @@ px4_add_romfs_files(
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
 	4012_gz_rover_ackermann
-	4013_gz_x500_lidar
+	4013_gz_x500_lidar_2d
 	4014_gz_x500_mono_cam_down
 	4015_gz_r1_rover_mecanum
+	4016_gz_x500_lidar_down
+	4017_gz_x500_lidar_front
+	4018_gz_quadtailsitter
+	4019_gz_x500_gimbal
+	4020_gz_tiltrotor
 
 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post
@@ -103,9 +109,13 @@ px4_add_romfs_files(
 	10040_sihsim_quadx
 	10041_sihsim_airplane
 	10042_sihsim_xvert
+	10043_sihsim_standard_vtol
 
 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2
 
+	71001_gazebo-classic_spacecraft_dart
+	71002_gz_spacecraft_2d
+
 	# [22000, 22999] Reserve for custom models
 )

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -4,6 +4,9 @@
 # Simulator IMU data provided at 250 Hz
 param set-default IMU_INTEG_RATE 250
 
+# For simulation, allow registering modes while armed for developer convenience
+param set-default COM_MODE_ARM_CHK 1
+
 if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
 
 	echo "INFO  [init] SIH simulator"
@@ -33,6 +36,10 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		then
 			sensor_mag_sim start
 		fi
+		if param compare -s SENS_EN_AGPSIM 1
+		then
+			sensor_agp_sim start
+		fi
 
 	else
 		echo "ERROR [init] simulator_sih failed to start"
@@ -153,6 +160,10 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
 	then
 		sensor_airspeed_sim start
 	fi
+	if param compare -s SENS_EN_AGPSIM 1
+	then
+		sensor_agp_sim start
+	fi
 
 elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then
 

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -153,8 +153,6 @@ fi
 
 param set-default BAT1_N_CELLS 4
 
-param set-default CBRK_SUPPLY_CHK 894281
-
 # disable check, no CPU load reported on posix yet
 param set-default COM_CPU_MAX -1
 param set-default COM_RAM_MAX -1
@@ -190,11 +188,11 @@ if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	echo "COM_DL_LOSS_T set to $COM_DL_LOSS_T_LONGER"
 	param set COM_DL_LOSS_T $COM_DL_LOSS_T_LONGER
 
-	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
+	COM_RC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
 	echo "COM_RC_LOSS_T set to $COM_RC_LOSS_T_LONGER"
 	param set COM_RC_LOSS_T $COM_RC_LOSS_T_LONGER
 
-	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
+	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 1.0" | bc)
 	echo "COM_OF_LOSS_T set to $COM_OF_LOSS_T_LONGER"
 	param set COM_OF_LOSS_T $COM_OF_LOSS_T_LONGER
 
@@ -247,6 +245,8 @@ then
 	battery_simulator start
 fi
 
+system_power_simulator start
+
 tone_alarm start
 rc_update start
 manual_control start

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -92,6 +92,13 @@ if(CONFIG_MODULES_ROVER_ACKERMANN)
 	)
 endif()
 
+if(CONFIG_MODULES_SPACECRAFT)
+	px4_add_romfs_files(
+		rc.sc_apps
+		rc.sc_defaults
+	)
+endif()
+
 if(CONFIG_MODULES_ROVER_MECANUM)
 	px4_add_romfs_files(
 		rc.rover_mecanum_apps

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -5,6 +5,15 @@
 # @type Standard VTOL
 # @class VTOL
 #
+# @output Motor1 MC motor front right
+# @output Motor2 MC motor back left
+# @output Motor3 MC motor front left
+# @output Motor4 MC motor back right
+# @output Motor5 Forward thrust motor
+# @output Servo1 Aileron
+# @output Servo2 Elevator
+# @output Servo3 Rudder
+#
 # @maintainer Roman Bapst <roman@auterion.com>
 #
 # @board px4_fmu-v2 exclude

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -12,28 +12,25 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-
 param set UAVCAN_ENABLE 0
 
 param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
 
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
+param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TYPE 3  # elevator
+param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set HIL_ACT_FUNC1 201
+param set HIL_ACT_FUNC2 202
+param set HIL_ACT_FUNC3 203
+param set HIL_ACT_FUNC4 101
 
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2

ROMFS/px4fmu_common/init.d/airframes/1103_standard_vtol_sih.hil

@@ -0,0 +1,92 @@
+#!/bin/sh
+#
+# @name SIH Standard VTOL QuadPlane
+#
+# @type Simulation
+# @class VTOL
+#
+# @output Motor1 MC motor front right
+# @output Motor2 MC motor back left
+# @output Motor3 MC motor front left
+# @output Motor4 MC motor back right
+# @output Motor5 Forward thrust motor
+# @output Servo1 Ailerons (single channel)
+# @output Servo2 Elevator
+# @output Servo3 Rudder
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set UAVCAN_ENABLE 0
+
+param set-default VT_TYPE 2
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR0_PX 0.2
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR1_PX -0.2
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_ROTOR2_PX 0.2
+param set-default CA_ROTOR2_PY -0.2
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.2
+param set-default CA_ROTOR3_PY 0.2
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_PX -0.3
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
+param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TYPE 3  # elevator
+param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 10
+param set-default FW_AIRSPD_MAX 12
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104
+param set-default HIL_ACT_FUNC5 201
+param set-default HIL_ACT_FUNC6 202
+param set-default HIL_ACT_FUNC7 203
+param set-default HIL_ACT_FUNC8 105
+
+param set-default MAV_TYPE 22
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+param set-default SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+
+param set-default SENS_DPRES_OFF 0.001
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.2
+
+# sih as standard vtol
+param set SIH_VEHICLE_TYPE 3

ROMFS/px4fmu_common/init.d/airframes/12001_octo_cox

@@ -21,7 +21,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-
 param set-default MAV_TYPE 14
 
 param set-default CA_ROTOR_COUNT 8

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -1,131 +0,0 @@
-#!/bin/sh
-#
-# @name Vertical Technologies DeltaQuad
-#
-# @type Standard VTOL
-# @class VTOL
-#
-# @maintainer Sander Smeets <sander@droneslab.com>
-#
-# @output Motor1 motor 1
-# @output Motor2 motor 2
-# @output Motor3 motor 3
-# @output Motor4 motor 4
-# @output Servo1 Right elevon
-# @output Servo2 Left elevon
-# @output Servo3 Pusher motor
-# @output Servo4 Pusher reverse channel
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default MAV_TYPE 22
-
-param set-default BAT1_CAPACITY 23000
-param set-default BAT1_N_CELLS 4
-param set-default BAT1_R_INTERNAL 0.0025
-
-param set-default SYS_HAS_NUM_ASPD 0
-
-param set-default EKF2_GPS_POS_X -0.12
-param set-default EKF2_IMU_POS_X -0.12
-
-param set-default FW_USE_AIRSPD 0
-param set-default NPFG_PERIOD 25
-param set-default FW_PR_FF 0.7
-param set-default FW_PR_I 0.18
-param set-default FW_PR_P 0.15
-param set-default FW_P_TC 0.5
-param set-default FW_PSP_OFF 5
-param set-default FW_R_LIM 35
-param set-default FW_RR_FF 0.9
-param set-default FW_RR_I 0.08
-param set-default FW_RR_P 0.18
-param set-default FW_T_CLMB_MAX 3
-param set-default FW_T_SINK_MAX 3
-param set-default FW_T_SINK_MIN 1
-param set-default FW_THR_TRIM 0.70
-param set-default FW_THR_SLEW_MAX 1
-param set-default FW_P_LIM_MAX 15
-param set-default FW_P_LIM_MIN -25
-param set-default FW_P_RMAX_NEG 45
-param set-default FW_P_RMAX_POS 45
-param set-default FW_R_RMAX 50
-param set-default FW_THR_MIN 0.55
-param set-default FW_BAT_SCALE_EN 1
-param set-default FW_T_RLL2THR 20
-
-param set-default MC_ROLLRATE_P 0.16
-param set-default MC_ROLLRATE_I 0.01
-param set-default MC_PITCHRATE_I 0.05
-
-param set-default MC_YAWRATE_MAX 20
-param set-default MC_AIRMODE 1
-
-param set-default MIS_TAKEOFF_ALT 15
-
-param set-default MPC_XY_P 0.8
-param set-default MPC_XY_VEL_MAX 5
-param set-default MPC_LAND_SPEED 1.2
-param set-default MPC_TILTMAX_LND 35
-param set-default MPC_Z_VEL_MAX_UP 1.5
-param set-default MPC_TKO_RAMP_T 0.8
-param set-default MPC_TILTMAX_AIR 25
-param set-default MPC_TILTMAX_LND 25
-param set-default MPC_YAWRAUTO_MAX 20
-
-param set-default NAV_LOITER_RAD 100
-
-param set-default PWM_MAIN_DIS5 1500
-param set-default PWM_MAIN_DIS6 1500
-param set-default PWM_MAIN_DIS7 900
-param set-default PWM_MAIN_DIS8 900
-
-
-param set-default SENS_BOARD_ROT 18
-
-# TELEM2 config
-param set-default MAV_1_CONFIG 102
-param set-default MAV_1_RATE 5000
-param set-default MAV_1_FORWARD 1
-param set-default SER_TEL2_BAUD 57600
-
-param set-default VT_TYPE 2
-param set-default VT_PITCH_MIN 8
-param set-default VT_FW_QC_P 55
-param set-default VT_FW_QC_R 55
-param set-default VT_TRANS_MIN_TM 15
-param set-default VT_FWD_THRUST_SC 4
-param set-default VT_TRANS_TIMEOUT 22
-
-param set-default COM_RC_OVERRIDE 0
-
-param set-default CA_AIRFRAME 2
-
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.1515
-param set-default CA_ROTOR0_PY 0.245
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.1515
-param set-default CA_ROTOR1_PY -0.1875
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.1515
-param set-default CA_ROTOR2_PY -0.245
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.1515
-param set-default CA_ROTOR3_PY 0.1875
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -1,121 +0,0 @@
-#!/bin/sh
-#
-# @name BabyShark VTOL
-#
-# @type Standard VTOL
-# @class VTOL
-#
-# @maintainer Silvan Fuhrer <silvan@auterion.com>
-#
-# @output Motor1 motor 1
-# @output Motor2 motor 2
-# @output Motor3 motor 3
-# @output Motor4 motor 4
-# @output Motor5 Pusher motor
-# @output Servo1 Ailerons
-# @output Servo2 A-tail left
-# @output Servo3 A-tail right
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-# @board holybro_kakutef7 exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default MAV_TYPE 22
-
-param set-default BAT1_N_CELLS 6
-
-param set-default FW_AIRSPD_MAX 30
-param set-default FW_AIRSPD_MIN 19
-param set-default FW_AIRSPD_TRIM 23
-param set-default FW_PN_R_SLEW_MAX 40
-param set-default FW_PSP_OFF 3
-param set-default FW_P_LIM_MAX 18
-param set-default FW_P_LIM_MIN -25
-param set-default FW_RLL_TO_YAW_FF 0.1
-param set-default FW_RR_P 0.08
-param set-default FW_R_LIM 45
-param set-default FW_R_RMAX 50
-param set-default FW_THR_TRIM 0.65
-param set-default FW_THR_MIN 0.3
-param set-default FW_THR_SLEW_MAX 0.6
-param set-default FW_T_SINK_MAX 15
-param set-default FW_T_SINK_MIN 3
-param set-default FW_YR_P 0.15
-
-param set-default IMU_DGYRO_CUTOFF 15
-param set-default MC_PITCHRATE_MAX 60
-param set-default MC_ROLLRATE_MAX 60
-param set-default MC_YAWRATE_I 0.15
-param set-default MC_YAWRATE_MAX 40
-param set-default MC_YAWRATE_P 0.3
-
-param set-default MC_AIRMODE 1
-param set-default MPC_LAND_SPEED 1
-param set-default MPC_MAN_TILT_MAX 25
-param set-default MPC_MAN_Y_MAX 40
-param set-default MPC_THR_HOVER 0.45
-param set-default MPC_TILTMAX_AIR 25
-param set-default MPC_YAWRAUTO_MAX 40
-param set-default MPC_Z_VEL_MAX_UP 2
-
-param set-default NAV_ACC_RAD 3
-
-param set-default PWM_MAIN_DIS3 1000
-param set-default PWM_MAIN_MIN3 1120
-
-param set-default SENS_BOARD_ROT 4
-
-param set-default VT_ARSP_BLEND 10
-param set-default VT_ARSP_TRANS 21
-param set-default VT_B_DEC_MSS 1.5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_FWD_THRUST_SC 1.2
-param set-default VT_F_TR_OL_TM 8
-param set-default VT_TRANS_MIN_TM 4
-param set-default VT_TYPE 2
-
-
-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-
-# Square quadrotor X PX4 numbering
-param set-default CA_ROTOR0_PX 1
-param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR1_PX -1
-param set-default CA_ROTOR1_PY -1
-param set-default CA_ROTOR2_PX 1
-param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -1
-param set-default CA_ROTOR3_PY 1
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TYPE 15
-param set-default CA_SV_CS0_TRQ_R 1
-param set-default CA_SV_CS1_TRQ_P 0.5
-param set-default CA_SV_CS1_TRQ_R 0
-param set-default CA_SV_CS1_TRQ_Y -0.5
-param set-default CA_SV_CS1_TYPE 13
-param set-default CA_SV_CS2_TRQ_P 0.5
-param set-default CA_SV_CS2_TRQ_Y 0.5
-param set-default CA_SV_CS2_TYPE 14
-
-param set-default PWM_MAIN_FUNC1 201
-param set-default PWM_MAIN_FUNC2 202
-param set-default PWM_MAIN_FUNC3 105
-param set-default PWM_MAIN_FUNC4 203
-param set-default PWM_MAIN_FUNC5 101
-param set-default PWM_MAIN_FUNC6 102
-param set-default PWM_MAIN_FUNC7 103
-param set-default PWM_MAIN_FUNC8 104
-
-param set-default PWM_MAIN_TIM0 50
-param set-default PWM_MAIN_DIS1 1500
-param set-default PWM_MAIN_DIS2 1500
-param set-default PWM_MAIN_DIS4 1500

ROMFS/px4fmu_common/init.d/airframes/16001_helicopter

@@ -11,7 +11,6 @@
 
 . ${R}etc/init.d/rc.heli_defaults
 
-
 # Disable PID gains for initial setup. These should be enabled after setting the FF gain.
 # P is expected to be lower than FF.
 param set-default MC_ROLLRATE_P 0

ROMFS/px4fmu_common/init.d/airframes/17002_TF-AutoG2

@@ -22,7 +22,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-
 param set-default BAT1_CAPACITY 2500
 param set-default BAT1_N_CELLS 3
 
@@ -41,7 +40,6 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
 
-
 param set-default CA_AIRFRAME 1
 
 param set-default CA_ROTOR_COUNT 1

ROMFS/px4fmu_common/init.d/airframes/17003_TF-G2

@@ -20,7 +20,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-
 param set-default BAT1_CAPACITY 3300
 param set-default BAT1_N_CELLS 3
 

ROMFS/px4fmu_common/init.d/airframes/24001_dodeca_cox

@@ -19,7 +19,6 @@ param set-default NAV_ACC_RAD 2
 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
 
-
 param set-default CA_ROTOR_COUNT 12
 # Bottom motors
 param set-default CA_ROTOR0_PX 0

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -67,7 +67,6 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
-param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters

ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5

@@ -68,7 +68,6 @@ param set-default MPC_Z_VEL_P_ACC 5
 param set-default MPC_Z_VEL_I_ACC 3
 param set-default MPC_LAND_ALT1 3
 param set-default MPC_LAND_ALT2 1
-param set-default MPC_POS_MODE 3
 param set-default CP_GO_NO_DATA 1
 
 # Navigator Parameters

ROMFS/px4fmu_common/init.d/airframes/4050_generic_250

@@ -21,7 +21,6 @@ param set-default MC_PITCHRATE_P 0.08
 param set-default MC_PITCHRATE_D 0.001
 param set-default MC_YAW_P 4
 
-
 param set-default MC_ROLLRATE_MAX 1600
 param set-default MC_PITCHRATE_MAX 1600
 param set-default MC_YAWRATE_MAX 1000

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -38,7 +38,6 @@ param set-default COM_FLTMODE5 -1
 param set-default COM_FLTMODE6  1
 param set-default COM_RC_LOSS_T 3
 
-
 # ekf2
 param set-default EKF2_BARO_NOISE 2
 
@@ -79,19 +78,16 @@ param set-default EKF2_RNG_POS_Z 0.033
 
 param set-default EKF2_TERR_NOISE 1
 
-
 # Maximum allowed angle velocity in the landed state
 param set-default LNDMC_ROT_MAX 40
 
 # Maximum vertical velocity allowed in the landed state
 param set-default LNDMC_Z_VEL_MAX 0.7
 
-
 # filtering
 param set-default IMU_DGYRO_CUTOFF 50
 param set-default IMU_GYRO_CUTOFF 65
 
-
 # Pitch angle & rate setting
 param set-default MC_PITCHRATE_P 0.075
 param set-default MC_PITCHRATE_I 0.1
@@ -148,7 +144,6 @@ param set-default RC_MAP_RETURN_SW  7
 
 param set-default RC1_TRIM          1000
 
-
 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15

ROMFS/px4fmu_common/init.d/airframes/4071_ifo

@@ -30,7 +30,6 @@ param set-default IMU_DGYRO_CUTOFF 90
 param set-default IMU_GYRO_CUTOFF 100
 
 # System
-
 param set-default SENS_BOARD_ROT 10
 
 # EKF2

ROMFS/px4fmu_common/init.d/airframes/4901_crazyflie21

@@ -18,7 +18,6 @@
 #
 . ${R}etc/init.d/rc.mc_defaults
 
-
 param set-default SYS_HAS_MAG 0
 param set-default EKF2_OF_CTRL 1
 param set-default EKF2_GPS_CTRL 0
@@ -85,6 +84,5 @@ param set-default PWM_MAIN_MAX3 255
 
 param set-default SENS_FLOW_MINRNG 0.05
 
-
 syslink start
 mavlink start -d /dev/bridge0 -b 57600 -m osd -r 40000

ROMFS/px4fmu_common/init.d/airframes/50001_aion_robotics_r1_rover

@@ -23,22 +23,22 @@ param set-default RBCLW_REV 1 # reverse right wheels
 
 # Rover parameters
 param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAN_YAW_SCALE 1
-param set-default RD_MAX_ACCEL 5
-param set-default RD_MAX_JERK 10
-param set-default RD_MAX_THR_YAW_R 4
-param set-default RD_YAW_RATE_P 0.1
-param set-default RD_YAW_RATE_I 0
+param set-default RD_MAX_ACCEL 3
+param set-default RD_MAX_DECEL 4
+param set-default RD_MAX_JERK 5
+param set-default RD_MAX_SPEED 1.6
+param set-default RD_MAX_THR_SPD 1.9
+param set-default RD_MAX_THR_YAW_R 0.7
+param set-default RD_MAX_YAW_ACCEL 600
+param set-default RD_MAX_YAW_RATE 250
+param set-default RD_SPEED_P 0.1
+param set-default RD_SPEED_I 0.01
+param set-default RD_TRANS_DRV_TRN 0.785398
+param set-default RD_TRANS_TRN_DRV 0.139626
 param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0
-param set-default RD_MAX_SPEED 1.8
-param set-default RD_MAX_THR_SPD 2
-param set-default RD_SPEED_P 0.5
-param set-default RD_SPEED_I 0.1
-param set-default RD_MAX_YAW_RATE 300
-param set-default RD_MISS_SPD_DEF 1.8
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
+param set-default RD_YAW_I 0.1
+param set-default RD_YAW_RATE_P 0.1
+param set-default RD_YAW_RATE_I 0.01
 
 # Pure pursuit parameters
 param set-default PP_LOOKAHD_MAX 10

ROMFS/px4fmu_common/init.d/airframes/51001_axial_scx10_2_trail_honcho

@@ -19,16 +19,18 @@ param set-default BAT1_N_CELLS 3
 param set-default NAV_ACC_RAD 0.5
 param set-default RA_ACC_RAD_GAIN 2
 param set-default RA_ACC_RAD_MAX 3
-param set-default RA_MAX_ACCEL 0.5
-param set-default RA_MAX_JERK 10
-param set-default RA_MAX_SPEED 2.7
+param set-default RA_LAT_ACCEL_I 0.01
+param set-default RA_LAT_ACCEL_P 0.1
+param set-default RA_MAX_ACCEL 1.5
+param set-default RA_MAX_DECEL 10
+param set-default RA_MAX_JERK 20
+param set-default RA_MAX_LAT_ACCEL 3
+param set-default RA_MAX_SPEED 2.5
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_MAX_STR_RATE 270
-param set-default RA_MISS_VEL_DEF 2.7
-param set-default RA_MISS_VEL_GAIN 3.5
-param set-default RA_MISS_VEL_MIN 1
-param set-default RA_SPEED_I 0.1
-param set-default RA_SPEED_P 0.5
+param set-default RA_MAX_THR_SPEED 2.8
+param set-default RA_SPEED_I 0.01
+param set-default RA_SPEED_P 0.1
 param set-default RA_WHEEL_BASE 0.321
 
 # Pure pursuit parameters

ROMFS/px4fmu_common/init.d/airframes/59000_generic_ground_vehicle

@@ -15,7 +15,6 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-
 param set-default BAT1_N_CELLS 2
 
 param set-default EKF2_ANGERR_INIT 0.01

ROMFS/px4fmu_common/init.d/airframes/60002_uuv_bluerov2_heavy

@@ -22,7 +22,6 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-
 param set-default MAV_1_CONFIG 102
 
 param set-default BAT1_A_PER_V 37.8798

ROMFS/px4fmu_common/init.d/airframes/70000_spacecraft_2d

@@ -0,0 +1,150 @@
+#!/bin/sh
+#
+# @name KTH Space Robot
+#
+# @type Space Robot
+# @class 2D Space Robot
+#
+# @maintainer DISCOWER
+#
+
+. ${R}etc/init.d/rc.sc_defaults
+
+param set-default CA_AIRFRAME 14
+param set-default MAV_TYPE 99
+
+param set-default CA_THRUSTER_CNT 8
+param set-default CA_R_REV 0
+
+# Auto to be provided by Custom Airframe
+param set-default CA_METHOD 0
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+param set-default COM_POSCTL_NAVL 2
+
+# Set Mocap Vision frame
+param set EKF2_EV_CTRL 15
+param set EKF2_HGT_REF 3
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+param set-default CA_THRUSTER0_PX -0.12
+param set-default CA_THRUSTER0_PY -0.12
+param set-default CA_THRUSTER0_PZ 0.0
+param set-default CA_THRUSTER0_CT 1.4
+param set-default CA_THRUSTER0_AX 1.0
+param set-default CA_THRUSTER0_AY 0.0
+param set-default CA_THRUSTER0_AZ 0.0
+
+param set-default CA_THRUSTER1_PX 0.12
+param set-default CA_THRUSTER1_PY -0.12
+param set-default CA_THRUSTER1_PZ 0.0
+param set-default CA_THRUSTER1_CT 1.4
+param set-default CA_THRUSTER1_AX -1.0
+param set-default CA_THRUSTER1_AY 0.0
+param set-default CA_THRUSTER1_AZ 0.0
+
+param set-default CA_THRUSTER2_PX -0.12
+param set-default CA_THRUSTER2_PY 0.12
+param set-default CA_THRUSTER2_PZ 0.0
+param set-default CA_THRUSTER2_CT 1.4
+param set-default CA_THRUSTER2_AX 1.0
+param set-default CA_THRUSTER2_AY 0.0
+param set-default CA_THRUSTER2_AZ 0.0
+
+param set-default CA_THRUSTER3_PX 0.12
+param set-default CA_THRUSTER3_PY 0.12
+param set-default CA_THRUSTER3_PZ 0.0
+param set-default CA_THRUSTER3_CT 1.4
+param set-default CA_THRUSTER3_AX -1.0
+param set-default CA_THRUSTER3_AY 0.0
+param set-default CA_THRUSTER3_AZ 0.0
+
+param set-default CA_THRUSTER4_PX 0.12
+param set-default CA_THRUSTER4_PY -0.12
+param set-default CA_THRUSTER4_PZ 0.0
+param set-default CA_THRUSTER4_CT 1.4
+param set-default CA_THRUSTER4_AX 0.0
+param set-default CA_THRUSTER4_AY 1.0
+param set-default CA_THRUSTER4_AZ 0.0
+
+param set-default CA_THRUSTER5_PX 0.12
+param set-default CA_THRUSTER5_PY 0.12
+param set-default CA_THRUSTER5_PZ 0.0
+param set-default CA_THRUSTER5_CT 1.4
+param set-default CA_THRUSTER5_AX 0.0
+param set-default CA_THRUSTER5_AY -1.0
+param set-default CA_THRUSTER5_AZ 0.0
+
+param set-default CA_THRUSTER6_PX -0.12
+param set-default CA_THRUSTER6_PY -0.12
+param set-default CA_THRUSTER6_PZ 0.0
+param set-default CA_THRUSTER6_CT 1.4
+param set-default CA_THRUSTER6_AX 0.0
+param set-default CA_THRUSTER6_AY 1.0
+param set-default CA_THRUSTER6_AZ 0.0
+
+param set-default CA_THRUSTER7_PX -0.12
+param set-default CA_THRUSTER7_PY 0.12
+param set-default CA_THRUSTER7_PZ 0.0
+param set-default CA_THRUSTER7_CT 1.4
+param set-default CA_THRUSTER7_AX 0.0
+param set-default CA_THRUSTER7_AY -1.0
+param set-default CA_THRUSTER7_AZ 0.0
+
+
+param set-default PWM_AUX_TIM0 10
+param set-default PWM_AUX_TIM1 10
+param set-default PWM_AUX_TIM2 10
+
+param set-default PWM_AUX_FUNC1 101
+param set-default PWM_AUX_FUNC2 102
+param set-default PWM_AUX_FUNC3 103
+param set-default PWM_AUX_FUNC4 104
+param set-default PWM_AUX_FUNC5 105
+param set-default PWM_AUX_FUNC6 106
+param set-default PWM_AUX_FUNC7 107
+param set-default PWM_AUX_FUNC8 108
+
+param set-default PWM_AUX_DIS1 0
+param set-default PWM_AUX_DIS2 0
+param set-default PWM_AUX_DIS3 0
+param set-default PWM_AUX_DIS4 0
+param set-default PWM_AUX_DIS5 0
+param set-default PWM_AUX_DIS6 0
+param set-default PWM_AUX_DIS7 0
+param set-default PWM_AUX_DIS8 0
+
+param set-default PWM_AUX_MIN1 0
+param set-default PWM_AUX_MIN2 0
+param set-default PWM_AUX_MIN3 0
+param set-default PWM_AUX_MIN4 0
+param set-default PWM_AUX_MIN5 0
+param set-default PWM_AUX_MIN6 0
+param set-default PWM_AUX_MIN7 0
+param set-default PWM_AUX_MIN8 0
+
+# BOARD_PWM_FREQ is downscaled by 10, thus PWM value is given in 10s of usec
+param set-default PWM_AUX_MAX1 10000
+param set-default PWM_AUX_MAX2 10000
+param set-default PWM_AUX_MAX3 10000
+param set-default PWM_AUX_MAX4 10000
+param set-default PWM_AUX_MAX5 10000
+param set-default PWM_AUX_MAX6 10000
+param set-default PWM_AUX_MAX7 10000
+param set-default PWM_AUX_MAX8 10000
+
+# Controller Tunings
+param set-default SC_ROLLRATE_P 0.14
+param set-default SC_PITCHRATE_P 0.14
+param set-default SC_ROLLRATE_I 0.3
+param set-default SC_PITCHRATE_I 0.3
+param set-default SC_ROLLRATE_D 0.004
+param set-default SC_PITCHRATE_D 0.004

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -48,6 +48,7 @@ if(CONFIG_MODULES_SIMULATION_PWM_OUT_SIM)
 		1100_rc_quad_x_sih.hil
 		1101_rc_plane_sih.hil
 		1102_tailsitter_duo_sih.hil
+		1103_standard_vtol_sih.hil
 	)
 endif()
 
@@ -129,8 +130,6 @@ if(CONFIG_MODULES_VTOL_ATT_CONTROL)
 		# [13000, 13999] VTOL
 		13000_generic_vtol_standard
 		13100_generic_vtol_tiltrotor
-		13013_deltaquad
-		13014_vtol_babyshark
 		13030_generic_vtol_quad_tiltrotor
 		13200_generic_vtol_tailsitter
 	)

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -13,8 +13,6 @@ param set-default MAV_TYPE 1
 #
 # Default parameters for fixed wing UAVs.
 #
-param set-default COM_POS_FS_DELAY 5
-
 # there is a 2.5 factor applied on the _FS thresholds if for invalidation
 param set-default COM_POS_FS_EPH 50
 param set-default COM_VEL_FS_EVH 3
@@ -26,7 +24,6 @@ param set-default COM_DISARM_PRFLT -1
 
 param set-default EKF2_ARSP_THR 8
 param set-default EKF2_FUSE_BETA 1
-param set-default EKF2_GPS_CHECK 21
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_REQ_EPH 10
 param set-default EKF2_REQ_EPV 10

ROMFS/px4fmu_common/init.d/rc.heli_defaults

@@ -12,6 +12,7 @@ param set-default MAV_TYPE 4
 
 param set-default COM_PREARM_MODE 2
 param set-default COM_SPOOLUP_TIME 10
+param set-default COM_DISARM_PRFLT 60
 
 # No need for minimum collective pitch (or airmode) to keep torque authority
 param set-default MPC_MANTHR_MIN 0

ROMFS/px4fmu_common/init.d/rc.mc_defaults

@@ -21,3 +21,6 @@ param set-default RTL_RETURN_ALT 30
 param set-default RTL_DESCEND_ALT 10
 
 param set-default GPS_UBX_DYNMODEL 6
+
+# lower RNG_FOG since MC are expected to fly closer over obstacles
+param set-default EKF2_RNG_FOG 1.0

ROMFS/px4fmu_common/init.d/rc.sc_apps

@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# Standard apps for sr. Attitude/Position estimator, Attitude/Position control.
+#
+# NOTE: Script variables are declared/initialized/unset in the rcS script.
+#
+
+# Start Spacecraft App
+spacecraft start
+
+# Estimator Group Selection
+# ekf2 start &
+
+# Start MicroDDS Client
+# uxrce_dds_client start -t udp -h 192.168.0.1 -n spacebot2
+# uxrce_dds_client start -t udp -p 8888
+
+#
+# Start Control Allocator
+#
+# sc_control_allocator start
+
+#
+# Start Spacecraft Rate Controller.
+#
+# sc_rate_control start
+
+#
+# Start Spacecraft Attitude Controller.
+#
+# sc_att_control start
+
+#
+# Start Spacecraft Position Controller.
+#
+# sc_pos_control start

ROMFS/px4fmu_common/init.d/rc.sc_defaults

@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# NOTE: Script variables are declared/initialized/unset in the rcS script.
+#
+
+set VEHICLE_TYPE sc
+
+# MAV_TYPE_QUADROTOR 2
+#param set-default MAV_TYPE 12
+
+# Set micro-dds-client to use ethernet and IP-address 192.168.0.1
+param set-default UXRCE_DDS_AG_IP -1062731775
+
+# Disable preflight disarm to not interfere with external launching
+param set-default COM_DISARM_PRFLT -1
+param set-default CBRK_SUPPLY_CHK 894281
+param set-default COM_ARM_HFLT_CHK 0
+
+#Missing params
+param set-default CP_DIST -1.0
+
+# Default to MoCap fusion
+param set-default ATT_EXT_HDG_M 2
+param set-default EKF2_EV_CTRL 15
+param set-default EKF2_EV_DELAY 5
+param set-default EKF2_GPS_CTRL 0
+param set-default EKF2_HGT_REF 3

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -211,6 +211,13 @@ then
 	spl06 -X -a 0x77 start
 fi
 
+# SPA06 sensor external I2C
+if param compare -s SENS_EN_SPA06 1
+then
+	spa06 -X start
+	spa06 -X -a 0x77 start
+fi
+
 # PCF8583 counter (RPM sensor)
 if param compare -s SENS_EN_PCF8583 1
 then

ROMFS/px4fmu_common/init.d/rcS

@@ -302,6 +302,75 @@ else
 		. $FCONFIG
 	fi
 
+
+	#
+	# Sensors System (start before Commander so Preflight checks are properly run).
+	#
+	if param greater SYS_HITL 0
+	then
+		sensors start -h
+
+		# disable GPS
+		param set GPS_1_CONFIG 0
+
+		# start the simulator in hardware if needed
+		if param compare SYS_HITL 2
+		then
+			simulator_sih start
+			sensor_baro_sim start
+			sensor_mag_sim start
+			sensor_gps_sim start
+			sensor_agp_sim start
+		fi
+
+	else
+		#
+		# board sensors: rc.sensors
+		#
+		set BOARD_RC_SENSORS ${R}etc/init.d/rc.board_sensors
+		if [ -f $BOARD_RC_SENSORS ]
+		then
+			echo "Board sensors: ${BOARD_RC_SENSORS}"
+			. $BOARD_RC_SENSORS
+		fi
+		unset BOARD_RC_SENSORS
+
+		. ${R}etc/init.d/rc.sensors
+
+		if param compare -s BAT1_SOURCE 2
+		then
+			esc_battery start
+		fi
+
+		if ! param compare BAT1_SOURCE 1
+		then
+			battery_status start
+		fi
+
+		sensors start
+	fi
+
+	#
+	# state estimator selection
+	#
+	if param compare -s EKF2_EN 1
+	then
+		ekf2 start &
+	fi
+
+	if param compare -s LPE_EN 1
+	then
+		local_position_estimator start
+	fi
+
+	if param compare -s ATT_EN 1
+	then
+		attitude_estimator_q start
+	fi
+
+	#
+	# px4io
+	#
 	if px4io supported
 	then
 	# Check if PX4IO present and update firmware if needed.
@@ -354,6 +423,11 @@ else
 	then
 		pps_capture start
 	fi
+	# RPM capture driver
+	if param greater -s RPM_CAP_ENABLE 0
+	then
+		rpm_capture start
+	fi
 	# Camera capture driver
 	if param greater -s CAM_CAP_FBACK 0
 	then
@@ -364,78 +438,24 @@ else
 	fi
 
 	#
-	# Sensors System (start before Commander so Preflight checks are properly run).
-	# Commander needs to be this early for in-air-restarts.
+	# Commander
 	#
 	if param greater SYS_HITL 0
 	then
+		commander start -h
+
 		if ! pwm_out_sim start -m hil
 		then
 			tune_control play error
 		fi
 
-		sensors start -h
-		commander start -h
-		# disable GPS
-		param set GPS_1_CONFIG 0
-
-		# start the simulator in hardware if needed
-		if param compare SYS_HITL 2
-		then
-			simulator_sih start
-			sensor_baro_sim start
-			sensor_mag_sim start
-			sensor_gps_sim start
-		fi
-
 	else
-		#
-		# board sensors: rc.sensors
-		#
-		set BOARD_RC_SENSORS ${R}etc/init.d/rc.board_sensors
-		if [ -f $BOARD_RC_SENSORS ]
-		then
-			echo "Board sensors: ${BOARD_RC_SENSORS}"
-			. $BOARD_RC_SENSORS
-		fi
-		unset BOARD_RC_SENSORS
-
-		. ${R}etc/init.d/rc.sensors
-
-		if param compare -s BAT1_SOURCE 2
-		then
-			esc_battery start
-		fi
-
-		if ! param compare BAT1_SOURCE 1
-		then
-			battery_status start
-		fi
-
-		sensors start
 		commander start
 
 		dshot start
 		pwm_out start
 	fi
 
-	#
-	# state estimator selection
-	if param compare -s EKF2_EN 1
-	then
-		ekf2 start &
-	fi
-
-	if param compare -s LPE_EN 1
-	then
-		local_position_estimator start
-	fi
-
-	if param compare -s ATT_EN 1
-	then
-		attitude_estimator_q start
-	fi
-
 	#
 	# Configure vehicle type specific parameters.
 	# Note: rc.vehicle_setup is the entry point for all vehicle type specific setup.

Tools/astyle/check_code_style_all.sh

@@ -43,7 +43,7 @@ fi
 
 # install git pre-commit hook
 HOOK_FILE="$DIR/../../.git/hooks/pre-commit"
-if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ]; then
+if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ] && [ $- == *i* ]; then
 	echo ""
 	echo -e "\033[31mNinja tip: add a git pre-commit hook to automatically check code style\033[0m"
 	echo -e "Would you like to install one now? (\033[94mcp ./Tools/astyle/pre-commit .git/hooks/pre-commit\033[0m): [y/\033[1mN\033[0m]"

Tools/astyle/files_to_check_code_style.sh

@@ -32,4 +32,5 @@ exec find boards msg src platforms test \
     -path src/lib/cdrstream/rosidl -prune -o \
     -path src/modules/zenoh/zenoh-pico -prune -o \
     -path boards/modalai/voxl2/libfc-sensor-api -prune -o \
+    -path src/drivers/actuators/vertiq_io/iq-module-communication-cpp -prune -o \
     \( -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) -print \) | grep $PATTERN

Tools/ci/generate_board_targets_json.py

@@ -25,10 +25,16 @@ parser.add_argument('-p', '--pretty', dest='pretty', action='store_true',
                     help='Pretty output instead of a single line')
 parser.add_argument('-g', '--groups', dest='group', action='store_true',
                     help='Groups targets')
+parser.add_argument('-f', '--filter', dest='filter', help='comma separated list of board names to use instead of all')
 
 args = parser.parse_args()
 verbose = args.verbose
 
+board_filter = []
+if args.filter:
+    for board in args.filter.split(','):
+        board_filter.append(board)
+
 build_configs = []
 grouped_targets = {}
 excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
@@ -67,7 +73,7 @@ def process_target(px4board_file, target_name):
         px4board_file.endswith("bootloader.px4board"):
         kconf.load_config(px4board_file, replace=True)
     else: # Merge config with default.px4board
-        default_kconfig = re.sub(r'[a-zA-Z\d_]+\.px4board', 'default.px4board', px4board_file)
+        default_kconfig = re.sub(r'[a-zA-Z\d_-]+\.px4board', 'default.px4board', px4board_file)
         kconf.load_config(default_kconfig, replace=True)
         kconf.load_config(px4board_file, replace=False)
 
@@ -141,6 +147,10 @@ for manufacturer in os.scandir(os.path.join(source_dir, '../boards')):
                 label = files.name[:-9]
                 target_name = manufacturer.name + '_' + board.name + '_' + label
 
+                if board_filter and not board_name in board_filter:
+                    if verbose: print(f'excluding board {board_name} ({target_name})')
+                    continue
+
                 if board_name in excluded_boards:
                     if verbose: print(f'excluding board {board_name} ({target_name})')
                     continue
@@ -189,8 +199,6 @@ if (args.group):
     #   nuttx-0
     #   nuttx-1
     final_groups = []
-    temp_group = []
-    group_number = {}
     last_man = ''
     last_arch = ''
     SPLIT_LIMIT = 10
@@ -199,88 +207,80 @@ if (args.group):
         print(f'=:Architectures: [{grouped_targets.keys()}]')
     for arch in grouped_targets:
         if(verbose):
-            print(f'=:Processing: [{arch}] Last: [{last_arch}]')
-
-        if(last_arch == ''):
-            last_arch = arch
-        if(arch not in group_number):
-                group_number[arch] = 0
-
-        if(last_arch != arch and len(temp_group) > 0):
-
-            group_name = last_arch + "-" + str(group_number[last_arch])
-            group_number[last_arch] += 1
-            targets = comma_targets(temp_group)
-            if(verbose):
-                print(f'=:Orphan: [{arch}][{last_arch}][{targets}]')
-            final_groups.append({
-                "container": grouped_targets[last_arch]['container'],
-                "targets": targets,
-                "arch": last_arch,
-                "group": group_name,
-                "len": len(temp_group)
-            })
-            last_arch = arch
-            temp_group = []
-
+            print(f'=:Processing: [{arch}]')
+        temp_group = []
         for man in grouped_targets[arch]['manufacturers']:
             if(verbose):
                 print(f'=:Processing: [{arch}][{man}]')
-            for tar in grouped_targets[arch]['manufacturers'][man]:
-                man_len = len(grouped_targets[arch]['manufacturers'][man])
+            man_len = len(grouped_targets[arch]['manufacturers'][man])
+            if(man_len > LOWER_LIMIT and man_len < (SPLIT_LIMIT + 1)):
+                # Manufacturers can have their own group
                 if(verbose):
-                    print(f'=:Processing: [{arch}][{man}][{man_len}][{tar}]')
-                if(last_man != man):
-                    # if(verbose):
-                    #     print(f'=:Processing: [{arch}][{man}][{tar}][{man_len}]')
-                    if(man_len > LOWER_LIMIT and man_len < (SPLIT_LIMIT + 1)):
-                        # Manufacturers can have their own group
-                        if(verbose):
-                            print(f'=:Processing: ==Manufacturers can have their own group')
-                            print(f'=:Processing: Limits[{LOWER_LIMIT}][{SPLIT_LIMIT}]')
-                        group_name = arch + "-" + man
-                        targets = comma_targets(grouped_targets[arch]['manufacturers'][man])
-                        last_man = man
-                        final_groups.append({
-                            "container": grouped_targets[arch]['container'],
-                            "targets": targets,
-                            "arch": arch,
-                            "group": group_name,
-                            "len": len(grouped_targets[arch]['manufacturers'][man])
-                        })
-                    elif(man_len >= (SPLIT_LIMIT + 1)):
-                        # Split big man groups into subgroups
-                        # example: Pixhawk
-                        chunk_limit = SPLIT_LIMIT
-                        chunk_counter = 0
-                        for chunk in chunks(grouped_targets[arch]['manufacturers'][man], chunk_limit):
-                            group_name = arch + "-" + man + "-" + str(chunk_counter)
-                            targets = comma_targets(chunk)
-                            last_man = man
-                            final_groups.append({
-                                "container": grouped_targets[arch]['container'],
-                                "targets": targets,
-                                "arch": arch,
-                                "group": group_name,
-                                "len": len(chunk),
-                            })
-                            chunk_counter += 1
-                    else:
-                        temp_group.append(tar)
-
-            if(len(temp_group) > (LOWER_LIMIT - 1)):
-                group_name = arch + "-" + str(group_number[arch])
-                last_arch = arch
-                group_number[arch] += 1
-                targets = comma_targets(temp_group)
+                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers can have their own group')
+                group_name = arch + "-" + man
+                targets = comma_targets(grouped_targets[arch]['manufacturers'][man])
                 final_groups.append({
                     "container": grouped_targets[arch]['container'],
                     "targets": targets,
                     "arch": arch,
                     "group": group_name,
-                    "len": len(temp_group)
+                    "len": len(grouped_targets[arch]['manufacturers'][man])
                 })
-                temp_group = []
+            elif(man_len >= (SPLIT_LIMIT + 1)):
+                # Split big man groups into subgroups
+                # example: Pixhawk
+                if(verbose):
+                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers has multiple own groups')
+                chunk_limit = SPLIT_LIMIT
+                chunk_counter = 0
+                for chunk in chunks(grouped_targets[arch]['manufacturers'][man], chunk_limit):
+                    group_name = arch + "-" + man + "-" + str(chunk_counter)
+                    targets = comma_targets(chunk)
+                    final_groups.append({
+                        "container": grouped_targets[arch]['container'],
+                        "targets": targets,
+                        "arch": arch,
+                        "group": group_name,
+                        "len": len(chunk),
+                    })
+                    chunk_counter += 1
+            else:
+                if(verbose):
+                    print(f'=:Processing: [{arch}][{man}][{man_len}]==Manufacturers too small group with others')
+                temp_group.extend(grouped_targets[arch]['manufacturers'][man])
+
+        temp_len = len(temp_group)
+        chunk_counter = 0
+        if(temp_len > 0 and temp_len < (SPLIT_LIMIT + 1)):
+            if(verbose):
+                print(f'=:Processing: [{arch}][orphan][{temp_len}]==Leftover arch can have their own group')
+            group_name = arch + "-" + str(chunk_counter)
+            targets = comma_targets(temp_group)
+            final_groups.append({
+                "container": grouped_targets[arch]['container'],
+                "targets": targets,
+                "arch": arch,
+                "group": group_name,
+                "len": temp_len
+            })
+        elif(temp_len >= (SPLIT_LIMIT + 1)):
+            # Split big man groups into subgroups
+            # example: Pixhawk
+            if(verbose):
+                print(f'=:Processing: [{arch}][orphan][{temp_len}]==Leftover arch can has multpile group')
+            chunk_limit = SPLIT_LIMIT
+            chunk_counter = 0
+            for chunk in chunks(temp_group, chunk_limit):
+                group_name = arch + "-" + str(chunk_counter)
+                targets = comma_targets(chunk)
+                final_groups.append({
+                    "container": grouped_targets[arch]['container'],
+                    "targets": targets,
+                    "arch": arch,
+                    "group": group_name,
+                    "len": len(chunk),
+                })
+                chunk_counter += 1
     if(verbose):
         import pprint
         print("================")

Tools/decrypt_ulog.py

@@ -1,62 +1,91 @@
 #!/usr/bin/env python3
 
+import sys
+
+try:
+    from Crypto.Cipher import ChaCha20
+except ImportError as e:
+    print("Failed to import crypto: " + str(e))
+    print("")
+    print("You may need to install it using:")
+    print("    pip3 install --user pycryptodome")
+    print("")
+    sys.exit(1)
+
 from Crypto.PublicKey import RSA
 from Crypto.Cipher import PKCS1_OAEP
-from Crypto.Cipher import ChaCha20
 from Crypto.Hash import SHA256
-import binascii
+from pathlib import Path
 import argparse
-#from pathlib import Path
-import sys
+
 
 if __name__ == "__main__":
 
     parser = argparse.ArgumentParser(description="""CLI tool to decrypt an ulog file\n""")
-    parser.add_argument("ulog_file", help=".ulog file", nargs='?', default=None)
-    parser.add_argument("ulog_key", help=".ulogk, encrypted key", nargs='?', default=None)
+    parser.add_argument("ulog_file", help=".ulge/.ulgc, encrypted log file", nargs='?', default=None)
+    parser.add_argument("ulog_key", help=".ulgk, legacy encrypted key (give empty string '' to ignore for .ulge)", nargs='?', default=None)
     parser.add_argument("rsa_key", help=".pem format key for decrypting the ulog key", nargs='?', default=None)
 
     args = parser.parse_args()
 
-    # Only generate a key pair, don't sign
-    if not args.ulog_file or not args.ulog_key or not args.rsa_key:
-        print('Need all arguments, the encrypted ulog file, the key and the key decryption key')
-        sys.exit(1);
+    # Check all arguments are given
+    if not args.rsa_key:
+        print('Need all arguments, the encrypted ulog file, key file (or empty string if not needed) and the key decryption key (.pem)')
+        sys.exit(1)
 
     # Read the private RSA key to decrypt the cahcha key
     with open(args.rsa_key, 'rb') as f:
         r = RSA.importKey(f.read(), passphrase='')
 
-    # Read the encrypted xchacha key and the nonce
-    with open(args.ulog_key, 'rb') as f:
+    if args.ulog_key == "":
+        key_data_filename = args.ulog_file
+        magic = "ULogEnc"
+    else:
+        key_data_filename = args.ulog_key
+        magic = "ULogKey"
+
+    with open(key_data_filename, 'rb') as f:
+        # Read the encrypted xchacha key and the nonce
         ulog_key_header = f.read(22)
 
         # Parse the header
         try:
             # magic
-            if not ulog_key_header.startswith(bytearray("ULogKey".encode())):
+            if not ulog_key_header.startswith(bytearray(magic.encode())):
+                print("Incorrect header magic")
                 raise Exception()
             # version
             if ulog_key_header[7] != 1:
+                print("Unsupported header version")
                 raise Exception()
             # expected key exchange algorithm (RSA_OAEP)
             if ulog_key_header[16] != 4:
+                print("Unsupported key algorithm")
                 raise Exception()
-            key_size = ulog_key_header[19] << 8 | ulog_key_header[18];
-            nonce_size = ulog_key_header[21] << 8 | ulog_key_header[20];
+            key_size = ulog_key_header[19] << 8 | ulog_key_header[18]
+            nonce_size = ulog_key_header[21] << 8 | ulog_key_header[20]
             ulog_key_cipher = f.read(key_size)
             nonce = f.read(nonce_size)
         except:
-            print("Keyfile format error")
-            sys.exit(1);
+            print("Keydata format error")
+            sys.exit(1)
+
+    if magic == "ULogEnc":
+        data_offset = 22 + key_size + nonce_size
+    else:
+        data_offset = 0
 
     # Decrypt the xchacha key
     cipher_rsa = PKCS1_OAEP.new(r,SHA256)
     ulog_key = cipher_rsa.decrypt(ulog_key_cipher)
     #print(binascii.hexlify(ulog_key))
 
-    # Read and decrypt the .ulgc
+    # Read and decrypt the ulog data
     cipher = ChaCha20.new(key=ulog_key, nonce=nonce)
+
+    outfilename = Path(args.ulog_file).stem + ".ulog"
     with open(args.ulog_file, 'rb') as f:
-        with open(args.ulog_file.rstrip(args.ulog_file[-1]), 'wb') as out:
+        if data_offset > 0:
+            f.seek(data_offset)
+        with open(outfilename, 'wb') as out:
             out.write(cipher.decrypt(f.read()))

Tools/kconfig/allyesconfig.py

@@ -40,6 +40,7 @@ exception_list = [
     'DRIVERS_DISTANCE_SENSOR_SRF05', # Requires hardcoded GPIO_ULTRASOUND
     'DRIVERS_PPS_CAPTURE', # Requires PPS GPIO config
     'DRIVERS_PWM_INPUT', # Requires PWM config
+    'DRIVERS_RPM_CAPTURE', # Requires PPS GPIO config
     'DRIVERS_TEST_PPM', # PIN config not portable
     'DRIVERS_TATTU_CAN', # Broken needs fixing
     'MODULES_REPLAY', # Fails on NuttX targets maybe force POSIX dependency?
@@ -52,6 +53,7 @@ exception_list = [
     'SYSTEMCMDS_I2C_LAUNCHER', #  undefined reference to `system',
     'MODULES_MUORB_APPS', # Weird QURT/Posix package doesn't work on x86 px4 sitl
     'MODULES_SIMULATION_SIMULATOR_SIH', # Causes compile errors
+    'MODULES_SPACECRAFT', # Clashes with Control Allocation (mom's spaghetti code)
 ]
 
 exception_list_sitl = [
@@ -72,6 +74,7 @@ exception_list_sitl = [
     'SYSTEMCMDS_I2CDETECT', # Not supported in SITL
     'SYSTEMCMDS_DMESG', # Not supported in SITL
     'SYSTEMCMDS_USB_CONNECTED', # Not supported in SITL
+    'MODULES_SPACECRAFT', # Clashes with Control Allocation (mom's spaghetti code)
 ]
 
 def main():

Tools/msg/generate_msg_docs.py

@@ -11,9 +11,22 @@ import sys
 
 def get_msgs_list(msgdir):
     """
-    Makes list of msg files in the given directory
+    Makes a list of relative paths of .msg files in the given directory
+    and its subdirectories.
+
+    Parameters:
+    msgdir (str): The directory to search for .msg files.
+
+    Returns:
+    list: A list of relative paths to .msg files.
     """
-    return [fn for fn in os.listdir(msgdir) if fn.endswith(".msg")]
+    msgs = []
+    for root, _, files in os.walk(msgdir):
+        for fn in files:
+            if fn.endswith(".msg"):
+                relative_path = os.path.relpath(os.path.join(root, fn), msgdir)
+                msgs.append(relative_path)
+    return msgs
 
 
 if __name__ == "__main__":
@@ -29,10 +42,11 @@ if __name__ == "__main__":
     msg_files = get_msgs_list(msg_path)
     msg_files.sort()
 
-    filelist_in_markdown=''
+    versioned_msgs_list = ''
+    unversioned_msgs_list = ''
 
     for msg_file in msg_files:
-        msg_name = os.path.splitext(msg_file)[0]
+        msg_name = os.path.splitext(os.path.basename(msg_file))[0]
         output_file = os.path.join(output_dir, msg_name+'.md')
         msg_filename = os.path.join(msg_path, msg_file)
         print("{:} -> {:}".format(msg_filename, output_file))
@@ -81,10 +95,17 @@ if __name__ == "__main__":
         with open(output_file, 'w') as content_file:
             content_file.write(markdown_output)
 
-        index_markdown_file_link='- [%s](%s.md)' % (msg_name,msg_name)
-        if summary_description:
-            index_markdown_file_link+=" — %s" % summary_description
-        filelist_in_markdown+=index_markdown_file_link+"\n"
+        # Categorize as versioned or unversioned
+        if "versioned" in msg_file:
+            versioned_msgs_list += '- [%s](%s.md)' % (msg_name, msg_name)
+            if summary_description:
+                versioned_msgs_list += " — %s" % summary_description
+            versioned_msgs_list += "\n"
+        else:
+            unversioned_msgs_list += '- [%s](%s.md)' % (msg_name, msg_name)
+            if summary_description:
+                unversioned_msgs_list += " — %s" % summary_description
+            unversioned_msgs_list += "\n"
 
     # Write out the index.md file
     index_text="""# uORB Message Reference
@@ -94,10 +115,20 @@ This list is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Too
 :::
 
 This topic lists the UORB messages available in PX4 (some of which may be may be shared by the [PX4-ROS 2 Bridge](../ros/ros2_comm.md)).
+
+[Versioned messages](../middleware/uorb.md#message-versioning) track changes to their definitions, with each modification resulting in a version increment.
+These messages are most likely shared through the PX4-ROS 2 Bridge.
+
 Graphs showing how these are used [can be found here](../middleware/uorb_graph.md).
 
+## Versioned Messages
+
 %s
-    """ % (filelist_in_markdown)
+
+## Unversioned Messages
+
+%s
+    """ % (versioned_msgs_list, unversioned_msgs_list)
     index_file = os.path.join(output_dir, 'index.md')
     with open(index_file, 'w') as content_file:
             content_file.write(index_text)

Tools/px4airframes/markdownout.py

@@ -137,7 +137,7 @@ div.frame_variant td, div.frame_variant th {
                             #print(output_name,value, attribstrs[0].strip(),attribstrs[1].strip())
                     outputs += '</ul>'
                     if has_outputs:
-                        outputs_entry = '<p><b>Specific Outputs:</b>' + outputs + '</p>'
+                        outputs_entry = '<br><b>Specific Outputs:</b>' + outputs
                     else:
                         outputs_entry = ''
 

Tools/px_uploader.py

@@ -189,7 +189,7 @@ class uploader:
     GET_CHIP        = b'\x2c'     # rev5+  , get chip version
     SET_BOOT_DELAY  = b'\x2d'     # rev5+  , set boot delay
     GET_CHIP_DES    = b'\x2e'     # rev5+  , get chip description in ASCII
-    GET_VERSION     = b'\x2f'     # rev5+  , get chip description in ASCII
+    GET_VERSION     = b'\x2f'     # rev5+  , get bootloader version in ASCII
     CHIP_FULL_ERASE = b'\x40'     # full erase of flash, rev6+
     MAX_DES_LENGTH  = 20
 
@@ -201,7 +201,6 @@ class uploader:
     INFO_BOARD_ID   = b'\x02'        # board type
     INFO_BOARD_REV  = b'\x03'        # board revision
     INFO_FLASH_SIZE = b'\x04'        # max firmware size in bytes
-    BL_VERSION      = b'\x07'        # get bootloader version, e.g. major.minor.patch.githash (up to 20 chars)
 
     PROG_MULTI_MAX  = 252            # protocol max is 255, must be multiple of 4
     READ_MULTI_MAX  = 252            # protocol max is 255

Tools/setup/Dockerfile

@@ -0,0 +1,31 @@
+# PX4 base development environment
+FROM ubuntu:24.04
+LABEL maintainer="Daniel Agar <daniel@agar.ca>, Ramon Roche <mrpollo@gmail.com>"
+
+ENV DEBIAN_FRONTEND=noninteractive
+ENV LANG=C.UTF-8
+ENV LC_ALL=C.UTF-8
+ENV DISPLAY=:99
+ENV TERM=xterm
+ENV TZ=UTC
+
+# SITL UDP PORTS
+EXPOSE 14556/udp
+EXPOSE 14557/udp
+
+COPY docker-entrypoint.sh /usr/local/bin/docker-entrypoint.sh
+
+# Install PX4 Requirements
+COPY requirements.txt /tmp/requirements.txt
+COPY ubuntu.sh /tmp/ubuntu.sh
+RUN touch /.dockerenv
+RUN bash /tmp/ubuntu.sh --no-sim-tools
+
+RUN git config --global --add safe.directory '*'
+
+# create user with id 1001 (jenkins docker workflow default)
+RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
+
+ENTRYPOINT ["/usr/local/bin/docker-entrypoint.sh"]
+
+CMD ["/bin/bash"]

Tools/setup/docker-entrypoint.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+echo "[docker-entrypoint.sh] Starting entrypoint"
+# Start virtual X server in the background
+# - DISPLAY default is :99, set in dockerfile
+# - Users can override with `-e DISPLAY=` in `docker run` command to avoid
+#   running Xvfb and attach their screen
+if [[ -x "$(command -v Xvfb)" && "$DISPLAY" == ":99" ]]; then
+	echo "[docker-entrypoint.sh] Starting Xvfb"
+	Xvfb :99 -screen 0 1600x1200x24+32 &
+fi
+
+# Check if the ROS_DISTRO is passed and use it
+# to source the ROS environment
+if [ -n "${ROS_DISTRO}" ]; then
+	echo "[docker-entrypoint.sh] ROS: ${ROS_DISTRO}"
+	source "/opt/ros/$ROS_DISTRO/setup.bash"
+fi
+
+echo "[docker-entrypoint.sh] Working Directory: ${pwd}"
+
+# Use the LOCAL_USER_ID if passed in at runtime
+if [ -n "${LOCAL_USER_ID}" ]; then
+	echo "[docker-entrypoint.sh] Starting with: $LOCAL_USER_ID:user"
+	# modify existing user's id
+	usermod -u $LOCAL_USER_ID user
+
+	# run as user
+	# exec gosu user "$@"
+	exec "$@"
+else
+	exec "$@"
+fi

Tools/setup/requirements.txt

@@ -1,7 +1,7 @@
 argcomplete
 cerberus
 coverage
-empy==3.3.4
+empy>=3.3,<4
 future
 jinja2>=2.8
 jsonschema

Tools/setup/ubuntu.sh

@@ -2,7 +2,7 @@
 
 set -e
 
-## Bash script to setup PX4 development environment on Ubuntu LTS (22.04, 20.04, 18.04).
+## Bash script to setup PX4 development environment on Ubuntu LTS (24.04, 22.04).
 ## Can also be used in docker.
 ##
 ## Installs:
@@ -33,7 +33,9 @@ if [ -f /.dockerenv ]; then
 	apt-get --quiet -y update && DEBIAN_FRONTEND=noninteractive apt-get --quiet -y install \
 		ca-certificates \
 		gnupg \
-		lsb-core \
+		gosu \
+		lsb-release \
+		software-properties-common \
 		sudo \
 		wget \
 		;
@@ -53,23 +55,7 @@ fi
 # check ubuntu version
 # otherwise warn and point to docker?
 UBUNTU_RELEASE="`lsb_release -rs`"
-
-if [[ "${UBUNTU_RELEASE}" == "14.04" ]]; then
-	echo "Ubuntu 14.04 is no longer supported"
-	exit 1
-elif [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
-	echo "Ubuntu 16.04 is no longer supported"
-	exit 1
-elif [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-	echo "Ubuntu 18.04"
-elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-	echo "Ubuntu 20.04"
-elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-	echo "Ubuntu 22.04"
-elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-	echo "Linux Mint 21.3"
-fi
-
+echo "Ubuntu ${UBUNTU_RELEASE}"
 
 echo
 echo "Installing PX4 general dependencies"
@@ -78,6 +64,7 @@ sudo apt-get update -y --quiet
 sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 	astyle \
 	build-essential \
+	ccache \
 	cmake \
 	cppcheck \
 	file \
@@ -86,7 +73,7 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 	gdb \
 	git \
 	lcov \
-	libfuse2 \
+	libssl-dev \
 	libxml2-dev \
 	libxml2-utils \
 	make \
@@ -105,12 +92,17 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 # Python3 dependencies
 echo
 echo "Installing PX4 Python3 dependencies"
-if [ -n "$VIRTUAL_ENV" ]; then
-	# virtual environments don't allow --user option
-	python -m pip install -r ${DIR}/requirements.txt
+PYTHON_VERSION=$(python3 --version 2>&1 | awk '{print $2}')
+REQUIRED_VERSION="3.11"
+if [[ "$(printf '%s\n' "$REQUIRED_VERSION" "$PYTHON_VERSION" | sort -V | head -n1)" == "$REQUIRED_VERSION" ]]; then
+	python3 -m pip install --break-system-packages -r ${DIR}/requirements.txt
 else
-	# older versions of Ubuntu require --user option
-	python3 -m pip install --user -r ${DIR}/requirements.txt
+	if [ -n "$VIRTUAL_ENV" ]; then
+		# virtual environments don't allow --user option
+		python -m pip install -r ${DIR}/requirements.txt
+	else
+		python3 -m pip install --user -r ${DIR}/requirements.txt
+	fi
 fi
 
 # NuttX toolchain (arm-none-eabi-gcc)
@@ -126,21 +118,26 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		build-essential \
 		flex \
 		g++-multilib \
+		gcc-arm-none-eabi \
 		gcc-multilib \
 		gdb-multiarch \
 		genromfs \
 		gettext \
 		gperf \
+		kconfig-frontends \
 		libelf-dev \
 		libexpat-dev \
 		libgmp-dev \
 		libisl-dev \
 		libmpc-dev \
 		libmpfr-dev \
-		libncurses5 \
-		libncurses5-dev \
-		libncursesw5-dev \
+		libncurses-dev \
+		libncurses6 \
+		libncursesw6 \
+		libnewlib-arm-none-eabi \
+		libstdc++-arm-none-eabi-newlib \
 		libtool \
+		libunwind-dev \
 		pkg-config \
 		screen \
 		texinfo \
@@ -148,46 +145,11 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		util-linux \
 		vim-common \
 		;
-	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" || "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		kconfig-frontends \
-		;
-	fi
-
 
 	if [ -n "$USER" ]; then
 		# add user to dialout group (serial port access)
 		sudo usermod -aG dialout $USER
 	fi
-
-	# arm-none-eabi-gcc
-	NUTTX_GCC_VERSION="9-2020-q2-update"
-	NUTTX_GCC_VERSION_SHORT="9-2020q2"
-
-	source $HOME/.profile # load changed path for the case the script is reran before relogin
-	if [ $(which arm-none-eabi-gcc) ]; then
-		GCC_VER_STR=$(arm-none-eabi-gcc --version)
-		GCC_FOUND_VER=$(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}" || true)
-	fi
-
-	if [[ "$GCC_FOUND_VER" == "1" ]]; then
-		echo "arm-none-eabi-gcc-${NUTTX_GCC_VERSION} found, skipping installation"
-
-	else
-		echo "Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
-		wget -O /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-${INSTALL_ARCH}-linux.tar.bz2 && \
-			sudo tar -jxf /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 -C /opt/;
-
-		# add arm-none-eabi-gcc to user's PATH
-		exportline="export PATH=/opt/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}/bin:\$PATH"
-
-		if grep -Fxq "$exportline" $HOME/.profile; then
-			echo "${NUTTX_GCC_VERSION} path already set.";
-		else
-			echo $exportline >> $HOME/.profile;
-			source $HOME/.profile; # Allows to directly build NuttX targets in the same terminal
-		fi
-	fi
 fi
 
 # Simulation tools
@@ -201,51 +163,8 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		bc \
 		;
 
-	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		java_version=11
-	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-		java_version=13
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		java_version=11
-	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		java_version=11
-	else
-		java_version=14
-	fi
-	# Java (jmavsim)
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		ant \
-		openjdk-$java_version-jre \
-		openjdk-$java_version-jdk \
-		libvecmath-java \
-		;
-
-	# Set Java 11 as default
-	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
-
 	# Gazebo / Gazebo classic installation
-	if [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		echo "Gazebo (Harmonic) will be installed"
-		echo "Earlier versions will be removed"
-		# Add Gazebo binary repository
-		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
-		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
-		sudo apt-get update -y --quiet
-
-		# Install Gazebo
-		gazebo_packages="gz-harmonic"
-	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		echo "Gazebo (Garden) will be installed"
-		echo "Earlier versions will be removed"
-		# Add Gazebo binary repository
-		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
-		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
-
-		sudo apt-get update -y --quiet
-
-		# Install Gazebo
-		gazebo_packages="gz-garden"
-	else
+	if [[ "${UBUNTU_RELEASE}" == "18.04" || "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 		wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 		# Update list, since new gazebo-stable.list has been added
@@ -260,6 +179,21 @@ if [[ $INSTALL_SIM == "true" ]]; then
 			gazebo_classic_version=11
 			gazebo_packages="gazebo$gazebo_classic_version libgazebo$gazebo_classic_version-dev"
 		fi
+	else
+		# Expects Ubuntu 22.04 > by default
+		echo "Gazebo (Harmonic) will be installed"
+		echo "Earlier versions will be removed"
+		# Add Gazebo binary repository
+		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
+		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
+		sudo apt-get update -y --quiet
+
+		# Install Gazebo
+		gazebo_packages="gz-harmonic libunwind-dev"
+
+		if [[ "${UBUNTU_RELEASE}" == "24.04" ]]; then
+			gazebo_packages="$gazebo_packages cppzmq-dev"
+		fi
 	fi
 
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -285,8 +219,3 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	fi
 
 fi
-
-if [[ $INSTALL_NUTTX == "true" ]]; then
-	echo
-	echo "Relogin or reboot computer before attempting to build NuttX targets"
-fi

Tools/teensy_uploader.py

@@ -0,0 +1,181 @@
+#!/usr/bin/env python3
+############################################################################
+#
+#   Copyright (c) 2024 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+#
+# Serial firmware uploader for the Teensy
+
+import sys
+import argparse
+import time
+import sys
+import usb.core
+import subprocess
+
+from sys import platform as _platform
+from pymavlink import mavutil
+
+try:
+    import serial
+except ImportError as e:
+    print("Failed to import serial: " + str(e))
+    print("")
+    print("You may need to install it using:")
+    print("    pip3 install --user pyserial")
+    print("")
+    sys.exit(1)
+
+# Define time to use time.time() by default
+def _time():
+    return time.time()
+
+class uploader(object):
+
+    def __init__(self, portname):
+        self.mavlink = mavutil.mavlink_connection(portname)
+
+    def send_reboot(self):
+        try:
+            self.mavlink.wait_heartbeat()
+            self.mavlink.reboot_autopilot(True)
+        except:
+            pass
+        return True
+
+TEENSY_BL_VENDORID = 0x16c0
+TEENSY_BL_PRODUCTID = 0x0478
+
+def main():
+    # Parse commandline arguments
+    parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.")
+    parser.add_argument('--port', action="store", required=True, help="Comma-separated list of serial port(s) to which the FMU may be attached")
+    parser.add_argument('--force', action='store_true', default=False, help='Override board type check, or silicon errata checks and continue loading')
+    parser.add_argument('--boot-delay', type=int, default=None, help='minimum boot delay to store in flash')
+    parser.add_argument('--vendor-id', type=lambda x: int(x,0), default=None, help='PX4 USB vendorid')
+    parser.add_argument('--product-id', type=lambda x: int(x,0), default=None, help='PX4 USB productid')
+    parser.add_argument('firmware', action="store", nargs='+', help="Firmware file(s)")
+    args = parser.parse_args()
+
+    found_bootloader = False
+
+    # find USB devices
+    dev = usb.core.find(idVendor=TEENSY_BL_VENDORID, idProduct=TEENSY_BL_PRODUCTID)
+    # loop through devices, printing vendor and product ids in decimal and hex
+    if dev is not None:
+        print("Found teensy bootloader")
+        found_bootloader = True
+    else:
+        dev = usb.core.find(idVendor=args.vendor_id, idProduct=args.product_id)
+        if dev is None:
+            print("No PX4 Device found try to press the button program push button")
+        print("Attempting to reboot into Teensy bootloader...", end="", flush=True)
+
+    try:
+        while True:
+            portlist = []
+            patterns = args.port.split(",")
+            # on unix-like platforms use glob to support wildcard ports. This allows
+            # the use of /dev/serial/by-id/usb-3D_Robotics on Linux, which prevents the upload from
+            # causing modem hangups etc
+            if "linux" in _platform or "darwin" in _platform or "cygwin" in _platform:
+                import glob
+                for pattern in patterns:
+                    portlist += glob.glob(pattern)
+            else:
+                portlist = patterns
+
+            for port in portlist:
+                try:
+                    if "linux" in _platform:
+                        # Linux, don't open Mac OS and Win ports
+                        if "COM" not in port and "tty.usb" not in port:
+                            up = uploader(port)
+                    elif "darwin" in _platform:
+                        # OS X, don't open Windows and Linux ports
+                        if "COM" not in port and "ACM" not in port:
+                            up = uploader(port)
+                    elif "cygwin" in _platform:
+                        # Cygwin, don't open native Windows COM and Linux ports
+                        if "COM" not in port and "ACM" not in port:
+                            up = uploader(port)
+                    elif "win" in _platform:
+                        # Windows, don't open POSIX ports
+                        if "/" not in port:
+                            up = uploader(port)
+                except Exception:
+                    # open failed, rate-limit our attempts
+                    time.sleep(0.05)
+
+                    # and loop to the next port
+                    continue
+
+                while True:
+                    up.send_reboot()
+
+                    # wait for the reboot, without we might run into Serial I/O Error 5
+                    time.sleep(0.25)
+
+                    # wait for the close, without we might run into Serial I/O Error 6
+                    time.sleep(0.3)
+
+                    dev = usb.core.find(idVendor=TEENSY_BL_VENDORID, idProduct=TEENSY_BL_PRODUCTID)
+                    # loop through devices, printing vendor and product ids in decimal and hex
+                    if dev is not None:
+                        print("")
+                        print("Found teensy bootloader")
+                        found_bootloader = True
+                        break
+
+                    print('.', end="", flush=True)
+
+                    if not found_bootloader:
+                        # Go to the next port
+                        continue
+
+            if(found_bootloader):
+                while True:
+                    result = subprocess.Popen("teensy_loader_cli -v --mcu=TEENSY41 " + args.firmware[0], shell=True)
+                    text = result.communicate()[0]
+                    if(result.returncode == 0):
+                        sys.exit(0)
+
+            # Delay retries to < 20 Hz to prevent spin-lock from hogging the CPU
+            time.sleep(0.05)
+
+    # CTRL+C aborts the upload/spin-lock by interrupt mechanics
+    except KeyboardInterrupt:
+        print("\n Upload aborted by user.")
+        sys.exit(0)
+
+if __name__ == '__main__':
+    main()

Tools/upload.sh

@@ -1,29 +0,0 @@
-#!/usr/bin/env bash
-
-EXEDIR=`pwd`
-BASEDIR=$(dirname $0)
-
-SYSTYPE=`uname -s`
-
-#
-# Serial port defaults.
-#
-# XXX The uploader should be smarter than this.
-#
-if [ $SYSTYPE = "Darwin" ]; then
-SERIAL_PORTS="/dev/tty.usbmodemPX*,/dev/tty.usbmodem*"
-fi
-
-if [ $SYSTYPE = "Linux" ]; then
-SERIAL_PORTS="/dev/serial/by-id/*_PX4_*,/dev/serial/by-id/usb-3D_Robotics*,/dev/serial/by-id/usb-The_Autopilot*,/dev/serial/by-id/usb-Bitcraze*,/dev/serial/by-id/pci-Bitcraze*,/dev/serial/by-id/usb-Gumstix*,/dev/serial/by-id/usb-UVify*,/dev/serial/by-id/usb-ArduPilot*,/dev/serial/by-id/usb-ARK*,"
-fi
-
-if [[ $SYSTYPE = *"CYGWIN"* ]]; then
-SERIAL_PORTS="/dev/ttyS*"
-fi
-
-if [ $SYSTYPE = "" ]; then
-SERIAL_PORTS="COM32,COM31,COM30,COM29,COM28,COM27,COM26,COM25,COM24,COM23,COM22,COM21,COM20,COM19,COM18,COM17,COM16,COM15,COM14,COM13,COM12,COM11,COM10,COM9,COM8,COM7,COM6,COM5,COM4,COM3,COM2,COM1,COM0"
-fi
-
-python $BASEDIR/px_uploader.py --port $SERIAL_PORTS $1

boards/ark/can-flow-mr/canbootloader.px4board

@@ -0,0 +1,5 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y

boards/ark/can-flow-mr/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 88,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the ARK Flow MR board",
+    "image": "",
+    "build_time": 0,
+    "summary": "ARKFLOWMR",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 2080768,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/ark/can-flow-mr/init/rc.board_sensors

@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# board sensors init
+#------------------------------------------------------------------------------
+
+param set-default IMU_GYRO_RATEMAX 1000
+param set-default SENS_FLOW_RATE 150
+param set-default SENS_IMU_CLPNOTI 0
+
+param set-default SENS_AFBR_S_RATE 25
+param set-default SENS_AFBR_L_RATE 10
+param set-default SENS_AFBR_THRESH 8
+param set-default SENS_AFBR_HYSTER 2
+
+# Internal SPI
+paa3905 -s start -Y 180
+
+iim42653 -R 0 -s start
+
+afbrs50 start

boards/ark/can-flow-mr/nuttx-config/canbootloader/defconfig

@@ -0,0 +1,57 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-flow-mr/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_STM32_TIM8=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USEC_PER_TICK=1000

boards/ark/can-flow-mr/nuttx-config/include/board.h

@@ -0,0 +1,136 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/* HSI - 8 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - 8  MHz Crystal
+ * LSE - not installed
+ */
+#define STM32_BOARD_USEHSE      1
+#define STM32_BOARD_XTAL        8000000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+
+/* Main PLL Configuration */
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
+#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
+
+#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
+
+#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
+#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
+#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
+
+#define STM32_SYSCLK_FREQUENCY  96000000ul
+
+/* AHB clock (HCLK) is SYSCLK (96MHz) */
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK (96MHz) */
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* Timers driven from APB2 will be PCLK2 since no prescale division */
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
+#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
+
+/* Alternate function pin selections ************************************************/
+
+/* UARTs */
+#define GPIO_USART2_RX	GPIO_USART2_RX_1
+#define GPIO_USART2_TX	GPIO_USART2_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
+
+/* SPI */
+#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1
+
+#define GPIO_SPI2_MISO  GPIO_SPI2_MISO_1 /* PB14 */
+#define GPIO_SPI2_MOSI  GPIO_SPI2_MOSI_1 /* PB15 */
+#define GPIO_SPI2_SCK   GPIO_SPI2_SCK_1  /* PB10 */
+
+#endif /* __ARCH_BOARD_BOARD_H */

boards/ark/can-flow-mr/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,44 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX   // DMA1, Stream 3, Channel 0
+#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX   // DMA1, Stream 4, Channel 0
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_2   // DMA2, Stream 2, Channel 3
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_2   // DMA2, Stream 5, Channel 3

boards/ark/can-flow-mr/nuttx-config/nsh/defconfig

@@ -0,0 +1,149 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-flow-mr/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_VARS=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=254
+CONFIG_SCHED_HPWORKSTACKSIZE=3000
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_FLASH_PREFETCH=y
+CONFIG_STM32_FLOWCONTROL_BROKEN=y
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SPI1_DMA=y
+CONFIG_STM32_SPI1_DMA_BUFFER=2048
+CONFIG_STM32_SPI2=y
+CONFIG_STM32_SPI2_DMA=y
+CONFIG_STM32_SPI2_DMA_BUFFER=2048
+CONFIG_STM32_TIM8=y
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART_BREAKS=y
+CONFIG_STM32_WWDG=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_SERIAL_CONSOLE=y
+CONFIG_USART2_TXBUFSIZE=1100
+CONFIG_USEC_PER_TICK=1000

boards/ark/can-flow-mr/nuttx-config/scripts/canbootloader_script.ld

@@ -0,0 +1,134 @@
+/****************************************************************************
+ * nuttx-config/scripts/canbootloader_script.ld
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/ark/can-flow-mr/nuttx-config/scripts/script.ld

@@ -0,0 +1,146 @@
+/****************************************************************************
+ * scripts/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 928K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(8);
+		/*
+		* This section positions the app_descriptor_t used
+		* by the make_can_boot_descriptor.py tool to set
+		* the application image's descriptor so that the
+		* uavcan bootloader has the ability to validate the
+		* image crc, size etc
+		*/
+		KEEP(*(.app_descriptor))
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}