WIP: enable -Wfloat-conversion everywhere

Cleanup fmu configs

.ci/Jenkinsfile-compile

@@ -9,11 +9,10 @@ pipeline {
         script {
           def build_nodes = [:]
           def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2021-05-04",
-            arm64: "px4io/px4-dev-aarch64:2021-05-04",
-            base: "px4io/px4-dev-base-bionic:2021-05-04",
-            nuttx: "px4io/px4-dev-nuttx-focal:2021-05-04",
-            snapdragon: "lorenzmeier/px4-dev-snapdragon:2020-04-01"
+            armhf: "px4io/px4-dev-armhf:2021-09-08",
+            arm64: "px4io/px4-dev-aarch64:2021-09-08",
+            base: "px4io/px4-dev-base-bionic:2021-09-08",
+            nuttx: "px4io/px4-dev-nuttx-focal:2021-09-08",
           ]
 
           def armhf_builds = [
@@ -39,6 +38,11 @@ pipeline {
                      "airmind_mindpx-v2_default",
                      "ark_can-flow_canbootloader",
                      "ark_can-flow_default",
+                     "ark_can-gps_canbootloader",
+                     "ark_can-gps_default",
+                     "ark_can-rtk-gps_canbootloader",
+                     "ark_can-rtk-gps_default",
+                     "atl_mantis-edu_default",
                      "av_x-v1_default",
                      "bitcraze_crazyflie_default",
                      "bitcraze_crazyflie21_default",
@@ -72,24 +76,19 @@ pipeline {
                      "nxp_fmuk66-v3_rtps",
                      "nxp_fmuk66-v3_socketcan",
                      "nxp_fmurt1062-v1_default",
-                     "nxp_ucans32k146_default",
                      "nxp_ucans32k146_canbootloader",
+                     "nxp_ucans32k146_default",
                      "omnibus_f4sd_default",
                      "px4_fmu-v2_default",
                      "px4_fmu-v2_fixedwing",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
                      "px4_fmu-v3_default",
-                     "px4_fmu-v4_cannode",
                      "px4_fmu-v4_default",
                      "px4_fmu-v4pro_default",
                      "px4_fmu-v5_ctrlalloc",
                      "px4_fmu-v5_debug",
                      "px4_fmu-v5_default",
-                     "px4_fmu-v5_fixedwing",
-                     "px4_fmu-v5_multicopter",
-                     "px4_fmu-v5_optimized",
-                     "px4_fmu-v5_rover",
                      "px4_fmu-v5_rtps",
                      "px4_fmu-v5_stackcheck",
                      "px4_fmu-v5_uavcanv0periph",
@@ -106,14 +105,8 @@ pipeline {
             archive: true
           ]
 
-          def snapdragon_builds = [
-            target: ["atlflight_eagle_qurt", "atlflight_eagle_default"],
-            image: docker_images.snapdragon,
-            archive: false
-          ]
-
           def docker_builds = [
-            armhf_builds, base_builds, nuttx_builds_archive//, snapdragon_builds
+            armhf_builds, base_builds, nuttx_builds_archive
           ]
 
           for (def build_type = 0; build_type < docker_builds.size(); build_type++) {
@@ -133,7 +126,7 @@ pipeline {
     // TODO: actually upload artifacts to S3
     // stage('S3 Upload') {
     //   agent {
-    //     docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+    //     docker { image 'px4io/px4-dev-base-focal:2021-09-08' }
     //   }
     //   options {
     //         skipDefaultCheckout()
@@ -165,11 +158,7 @@ pipeline {
 def createBuildNode(Boolean archive, String docker_image, String target) {
   return {
 
-    // TODO: fix the snapdragon image
     bypass_entrypoint = ''
-    if (docker_image == 'lorenzmeier/px4-dev-snapdragon:2020-04-01') {
-      bypass_entrypoint = ' --entrypoint=""'
-    }
 
     node {
       docker.withRegistry('https://registry.hub.docker.com', 'docker_hub_dagar') {

.devcontainer/devcontainer.json

@@ -2,7 +2,7 @@
 // https://github.com/microsoft/vscode-dev-containers/tree/v0.134.0/containers/cpp
 {
 	"name": "px4-dev-nuttx",
-	"image": "px4io/px4-dev-nuttx-focal:2021-05-04",
+	"image": "px4io/px4-dev-nuttx-focal:2021-09-08",
 
 	"runArgs": [ "--cap-add=SYS_PTRACE", "--security-opt", "seccomp=unconfined" ],
 

.github/ISSUE_TEMPLATE/2_Feature_request.md

@@ -4,7 +4,7 @@ about: Suggest an idea for this project
 
 ---
 
-For general questions please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/).
+For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
 
 **Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

.github/slack.svg

@@ -0,0 +1,24 @@
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="90" height="20">
+  <linearGradient id="smooth" x2="0" y2="100%">
+    <stop offset="0" stop-color="#bbb" stop-opacity=".1"/>
+    <stop offset="1" stop-opacity=".1"/>
+  </linearGradient>
+
+  <mask id="round">
+    <rect width="90" height="20" rx="3" fill="#fff"/>
+  </mask>
+
+  <g mask="url(#round)">
+    <rect width="42" height="20" fill="#555"/>
+    <rect x="42" width="48" height="20" fill="#E01563"/>
+    <rect width="90" height="20" fill="url(#smooth)"/>
+  </g>
+
+  <g fill="#fff" text-anchor="middle" font-family="DejaVu Sans,Verdana,Geneva,sans-serif" font-size="11">
+    <text x="22" y="15" fill="#010101" fill-opacity=".3">slack</text>
+    <text x="22" y="14">slack</text>
+    <text x="65" y="15" fill="#010101" fill-opacity=".3">Join us!</text>
+    <text x="65" y="14">Join us!</text>
+  </g>
+</svg>
+

.github/workflows/checks.yml

@@ -29,34 +29,13 @@ jobs:
           "parameters_metadata",
         ]
     container:
-      image: px4io/px4-dev-nuttx-focal:2021-05-04
+      image: px4io/px4-dev-nuttx-focal:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1
       with:
         token: ${{ secrets.ACCESS_TOKEN }}
 
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: tests_${{matrix.ubuntu_release}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: tests_${{matrix.ubuntu_release}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
     - name: check environment
       run: |
           export

.github/workflows/clang-tidy.yml

@@ -11,36 +11,11 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-clang:2021-05-04
+    container: px4io/px4-dev-clang:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
         token: ${{secrets.ACCESS_TOKEN}}
 
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: clang-tidy-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: clang-tidy-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
     - name: make clang-tidy-quiet
-      run: |
-        ccache -z
-        make clang-tidy-quiet
-        ccache -s
+      run: make clang-tidy-quiet

.github/workflows/compile_linux.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-armhf:2021-05-04
+    container: px4io/px4-dev-armhf:2021-09-08
     strategy:
       matrix:
         config: [
@@ -42,8 +42,9 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 40M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 

.github/workflows/compile_linux_arm64.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-aarch64:2021-05-04
+    container: px4io/px4-dev-aarch64:2021-09-08
     strategy:
       matrix:
         config: [
@@ -39,8 +39,9 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 40M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 

.github/workflows/compile_macos.yml

@@ -43,8 +43,9 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 40M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 

.github/workflows/compile_nuttx.yml

@@ -11,13 +11,15 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-05-04
+    container: px4io/px4-dev-nuttx-focal:2021-09-08
     strategy:
       matrix:
         config: [
           airmind_mindpx-v2,
           ark_can-flow,
           ark_can-gps,
+          ark_can-rtk-gps,
+          atl_mantis-edu,
           av_x-v1,
           bitcraze_crazyflie,
           bitcraze_crazyflie21,
@@ -78,13 +80,15 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 50M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 
     - name: make all_variants_${{matrix.config}}
       run: make all_variants_${{matrix.config}}
+      timeout-minutes: 45
     - name: make ${{matrix.config}} bloaty_compileunits
       run: make ${{matrix.config}} bloaty_compileunits || true
     - name: make ${{matrix.config}} bloaty_inlines

.github/workflows/compile_nuttx_cannode.yml

@@ -11,16 +11,17 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-05-04
+    container: px4io/px4-dev-nuttx-focal:2021-09-08
     strategy:
       matrix:
         config: [
           ark_can-flow_default,
+          ark_can-gps_default,
+          ark_can-rtk-gps_default,
           cuav_can-gps-v1_default,
           freefly_can-rtk-gps_default,
           holybro_can-gps-v1_default,
-          #nxp_ucans32k146_default,
-          px4_fmu-v4_cannode
+          nxp_ucans32k146_default
           ]
     steps:
     - uses: actions/checkout@v1
@@ -44,8 +45,9 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 20M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 

.github/workflows/deploy_all.yml

@@ -23,38 +23,14 @@ jobs:
     needs: enumerate_targets
     strategy:
       matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
-    container: px4io/px4-dev-${{ matrix.container }}:2021-05-04
+    container: px4io/px4-dev-${{ matrix.container }}:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
         token: ${{secrets.ACCESS_TOKEN}}
 
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.target}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.target}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
     - name: make ${{matrix.target}}
       run: make ${{matrix.target}}
-    - name: ccache post-run
-      run: ccache -s
 
     - name: parameter & events metadata
       run: |

.github/workflows/ekf_functional_change_indicator.yml

@@ -5,7 +5,7 @@ on: pull_request
 jobs:
   unit_tests:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v2.3.1
       with:

.github/workflows/ekf_update_change_indicator.yml

@@ -5,7 +5,7 @@ on: push
 jobs:
   unit_tests:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     env:
       GIT_COMMITTER_EMAIL: bot@px4.io
       GIT_COMMITTER_NAME: PX4BuildBot

.github/workflows/mavros_mission_tests.yml

@@ -25,7 +25,7 @@ jobs:
           #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
 
     container:
-      image: px4io/px4-dev-ros-melodic:2021-05-04
+      image: px4io/px4-dev-ros-melodic:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1
@@ -49,8 +49,9 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
           echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 
@@ -78,6 +79,7 @@ jobs:
       run: |
         export
         ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45
 
     - name: Look at core files
       if: failure()

.github/workflows/mavros_offboard_tests.yml

@@ -20,7 +20,7 @@ jobs:
           #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
 
     container:
-      image: px4io/px4-dev-ros-melodic:2021-05-04
+      image: px4io/px4-dev-ros-melodic:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1
@@ -44,8 +44,9 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
           echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 
@@ -73,6 +74,7 @@ jobs:
       run: |
         export
         ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45
 
     - name: Look at core files
       if: failure()

.github/workflows/metadata.yml

@@ -11,7 +11,7 @@ jobs:
 
   airframe:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -37,7 +37,7 @@ jobs:
 
   module:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -52,7 +52,7 @@ jobs:
 
   parameter:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -76,7 +76,7 @@ jobs:
 
   events:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -103,7 +103,7 @@ jobs:
 
   uorb_graph:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-05-04
+    container: px4io/px4-dev-nuttx-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -118,7 +118,7 @@ jobs:
 
   micrortps_agent:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -132,7 +132,7 @@ jobs:
 
   ROS_msgs:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -145,7 +145,7 @@ jobs:
 
   ROS2_bridge:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-05-04
+    container: px4io/px4-dev-base-focal:2021-09-08
     steps:
     - uses: actions/checkout@v1
       with:
@@ -154,4 +154,4 @@ jobs:
     - name: PX4 ROS2 bridge
       run: |
         git clone https://github.com/PX4/px4_ros_com.git
-        ./msg/tools/uorb_to_ros_rtps_ids.py -i msg/tools/uorb_rtps_message_ids.yaml -o px4_ros_com/templates/uorb_rtps_message_ids.yaml
+        ./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml

.github/workflows/sitl_tests.yml

@@ -21,7 +21,7 @@ jobs:
           - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",         model: "standard_vtol" } # Zurich
 
     container:
-      image: px4io/px4-dev-simulation-focal:2021-05-04
+      image: px4io/px4-dev-simulation-focal:2021-09-08
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1
@@ -50,8 +50,9 @@ jobs:
           mkdir -p ~/.ccache
           echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
           echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
           echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
           ccache -s
           ccache -z
 
@@ -96,6 +97,7 @@ jobs:
         PX4_HOME_ALT: ${{matrix.config.altitude}}
         PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
       run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json
+      timeout-minutes: 45
 
     - name: Look at core files
       if: failure()

.gitmodules

@@ -18,10 +18,6 @@
 	path = src/lib/matrix
 	url = https://github.com/PX4/PX4-Matrix.git
 	branch = master
-[submodule "boards/atlflight/cmake_hexagon"]
-	path = boards/atlflight/cmake_hexagon
-	url = https://github.com/PX4/cmake_hexagon.git
-	branch = px4
 [submodule "src/drivers/gps/devices"]
 	path = src/drivers/gps/devices
 	url = https://github.com/PX4/PX4-GPSDrivers.git
@@ -33,14 +29,11 @@
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.0.0+
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
 	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.0.0+
-[submodule "platforms/qurt/dspal"]
-	path = platforms/qurt/dspal
-	url = https://github.com/ATLFlight/dspal.git
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
@@ -70,3 +63,14 @@
 [submodule "src/lib/events/libevents"]
 	path = src/lib/events/libevents
 	url = https://github.com/mavlink/libevents.git
+[submodule "Tools/simulation-ignition"]
+	path = Tools/simulation-ignition
+	url = https://github.com/Auterion/px4-simulation-ignition.git
+[submodule "src/lib/crypto/libtomcrypt"]
+	path = src/lib/crypto/libtomcrypt
+	url = https://github.com/PX4/libtomcrypt.git
+	branch = px4
+[submodule "src/lib/crypto/libtommath"]
+	path = src/lib/crypto/libtommath
+	url = https://github.com/PX4/libtommath.git
+	branch = px4

.vscode/cmake-variants.yaml

@@ -6,6 +6,11 @@ CONFIG:
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
+    px4_sitl_rtps:
+      short: px4_sitl_rtps
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_rtps
     px4_sitl_asan:
       short: px4_sitl (AddressSanitizer)
       buildType: AddressSanitizer
@@ -96,6 +101,21 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-gps_canbootloader
+    ark_can-rtk-gps_default:
+      short: ark_can-rtk-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-rtk-gps_default
+    ark_can-rtk-gps_canbootloader:
+      short: ark_can-rtk-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-rtk-gps_canbootloader
+    atl_mantis-edu_default:
+      short: atl_mantis-edu
+      buildType: MinSizeRel
+      settings:
+        CONFIG: atl_mantis-edu_default
     av_x-v1_default:
       short: av_x-v1
       buildType: MinSizeRel

.vscode/settings.json

@@ -31,7 +31,6 @@
                 "esc"
         ],
         "debug.toolBarLocation": "docked",
-        "editor.acceptSuggestionOnEnter": "off",
         "editor.defaultFormatter": "chiehyu.vscode-astyle",
         "editor.dragAndDrop": false,
         "editor.insertSpaces": false,

CMakeLists.txt

@@ -143,12 +143,33 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
 include(px4_add_module)
 set(config_module_list)
 
+# Find Python
+# If using catkin, Python 2 is found since it points
+# to the Python libs installed with the ROS distro
+if (NOT CATKIN_DEVEL_PREFIX)
+	find_package(PythonInterp 3)
+	# We have a custom error message to tell users how to install python3.
+	if (NOT PYTHONINTERP_FOUND)
+		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+			"    macOS: brew install python")
+	endif()
+else()
+	find_package(PythonInterp REQUIRED)
+endif()
+
+option(PYTHON_COVERAGE "Python code coverage" OFF)
+if(PYTHON_COVERAGE)
+	message(STATUS "python coverage enabled")
+	set(PYTHON_EXECUTABLE coverage run -p)
+endif()
+
 include(px4_config)
-include(px4_add_board)
-include(${PX4_CONFIG_FILE})
+include(kconfig)
 message(STATUS "PX4 config: ${PX4_CONFIG}")
 message(STATUS "PX4 platform: ${PX4_PLATFORM}")
 
+
 if(${PX4_PLATFORM} STREQUAL "posix")
 	if(ENABLE_LOCKSTEP_SCHEDULER)
 		add_definitions(-DENABLE_LOCKSTEP_SCHEDULER)
@@ -283,27 +304,6 @@ if (CATKIN_DEVEL_PREFIX)
 	endif()
 endif()
 
-# Python
-# If using catkin, Python 2 is found since it points
-# to the Python libs installed with the ROS distro
-if (NOT CATKIN_DEVEL_PREFIX)
-	find_package(PythonInterp 3)
-	# We have a custom error message to tell users how to install python3.
-	if (NOT PYTHONINTERP_FOUND)
-		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-			"    macOS: brew install python")
-	endif()
-else()
-	find_package(PythonInterp REQUIRED)
-endif()
-
-option(PYTHON_COVERAGE "Python code coverage" OFF)
-if(PYTHON_COVERAGE)
-	message(STATUS "python coverage enabled")
-	set(PYTHON_EXECUTABLE coverage run -p)
-endif()
-
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -443,8 +443,10 @@ endforeach()
 
 add_custom_command(OUTPUT ${uorb_graph_config}
 	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/uorb_graph/create.py
-		${graph_module_list}
+		${graph_module_list} --src-path src/lib
+		--merge-depends
 		--exclude-path src/examples
+		--exclude-path src/lib/parameters # FIXME: enable & fix
 		--file ${PX4_SOURCE_DIR}/Tools/uorb_graph/graph_${uorb_graph_config}
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	COMMENT "Generating uORB graph"

Jenkinsfile

@@ -15,7 +15,7 @@ pipeline {
         // stage('Catkin build on ROS workspace') {
         //   agent {
         //     docker {
-        //       image 'px4io/px4-dev-ros-melodic:2021-05-04'
+        //       image 'px4io/px4-dev-ros-melodic:2021-08-18'
         //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
         //     }
         //   }
@@ -56,7 +56,7 @@ pipeline {
         stage('Colcon build on ROS2 workspace') {
           agent {
             docker {
-              image 'px4io/px4-dev-ros2-foxy:2021-05-04'
+              image 'px4io/px4-dev-ros2-foxy:2021-08-18'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
             }
           }
@@ -85,7 +85,7 @@ pipeline {
 
         stage('Airframe') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh 'make distclean'
@@ -105,7 +105,7 @@ pipeline {
 
         stage('Parameter') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh 'make distclean'
@@ -125,7 +125,7 @@ pipeline {
 
         stage('Module') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh 'make distclean'
@@ -143,10 +143,28 @@ pipeline {
           }
         }
 
+        stage('msg file docs') {
+          agent {
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
+          }
+          steps {
+            sh 'mkdir -p build/msg_docs; ./msg/tools/generate_msg_docs.py -d build/msg_docs'
+            dir('build') {
+              archiveArtifacts(artifacts: 'msg_docs/*.md')
+              stash includes: 'msg_docs/*.md', name: 'msg_documentation'
+            }
+          }
+          post {
+            always {
+              sh 'make distclean'
+            }
+          }
+        }
+
         stage('uORB graphs') {
           agent {
             docker {
-              image 'px4io/px4-dev-nuttx-focal:2021-05-04'
+              image 'px4io/px4-dev-nuttx-focal:2021-08-18'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
             }
           }
@@ -156,8 +174,8 @@ pipeline {
             sh 'git fetch --all --tags'
             sh 'make uorb_graphs'
             dir('Tools/uorb_graph') {
-              archiveArtifacts(artifacts: 'graph_px4_sitl.json')
-              stash includes: 'graph_px4_sitl.json', name: 'uorb_graph'
+              archiveArtifacts(artifacts: 'graph_*.json')
+              stash includes: 'graph_*.json', name: 'uorb_graph'
             }
           }
           post {
@@ -176,18 +194,22 @@ pipeline {
 
         stage('Userguide') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh('export')
             unstash 'metadata_airframes'
             unstash 'metadata_parameters'
             unstash 'metadata_module_documentation'
+            unstash 'msg_documentation'
+            unstash 'uorb_graph'
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh('git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_user_guide.git')
               sh('cp airframes.md px4_user_guide/en/airframes/airframe_reference.md')
               sh('cp parameters.md px4_user_guide/en/advanced_config/parameter_reference.md')
               sh('cp -R modules/*.md px4_user_guide/en/modules/')
+              sh('cp -R graph_*.json px4_user_guide/.vuepress/public/en/middleware/')
+              sh('cp -R msg_docs/*.md px4_user_guide/en/msg_docs/')
               sh('cd px4_user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
               sh('cd px4_user_guide; git push origin master || true')
               sh('rm -rf px4_user_guide')
@@ -206,7 +228,7 @@ pipeline {
 
         stage('QGroundControl') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh('export')
@@ -234,7 +256,7 @@ pipeline {
 
         stage('microRTPS agent') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh('export')
@@ -264,7 +286,7 @@ pipeline {
 
         stage('PX4 ROS msgs') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh('export')
@@ -293,7 +315,7 @@ pipeline {
 
         stage('PX4 ROS2 bridge') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh('export')
@@ -301,7 +323,7 @@ pipeline {
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
               // deploy uORB RTPS ID map
-              sh('./msg/tools/uorb_to_ros_rtps_ids.py -i msg/tools/uorb_rtps_message_ids.yaml -o px4_ros_com/templates/uorb_rtps_message_ids.yaml')
+              sh('./msg/tools/uorb_to_ros_urtps_topics.py -i msg/tools/urtps_bridge_topics.yaml -o px4_ros_com/templates/urtps_bridge_topics.yaml')
               sh('cd px4_ros_com; git status; git add .; git commit -a -m "Update uORB RTPS ID map `date`" || true')
               sh('cd px4_ros_com; git push origin ${BRANCH_NAME} || true')
               // deploy uORB RTPS required tools
@@ -336,7 +358,7 @@ pipeline {
 
         stage('S3') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
             sh('export')

Kconfig

@@ -0,0 +1,179 @@
+# PX4 Firmware Configuration
+
+
+mainmenu "PX4 Firmware Configuration"
+
+comment "Vendor: $(VENDOR)"
+comment "Model: $(MODEL)"
+comment "Label: $(LABEL)"
+
+menu "Toolchain"
+    choice
+        prompt "Platform"
+        default PLATFORM_NUTTX
+        config PLATFORM_NUTTX
+            bool "nuttx"
+        config PLATFORM_POSIX
+            bool "posix"
+        config PLATFORM_QURT
+            bool "qurt"
+    endchoice
+
+    config BOARD_PLATFORM
+        string
+        default "nuttx" if PLATFORM_NUTTX
+        default "posix" if PLATFORM_POSIX
+        default "qurt" if PLATFORM_QURT
+
+    config BOARD_LOCKSTEP
+        bool "Force enable lockstep"
+        depends on PLATFORM_POSIX
+        help
+            forces lockstep behaviour, despite REPLAY env variable
+
+    config BOARD_NOLOCKSTEP
+        bool "Force disable lockstep"
+        depends on PLATFORM_POSIX
+        help
+            forces nolockstep behaviour, despite REPLAY env variable
+
+    config BOARD_LINUX
+        bool "Linux OS"
+        depends on PLATFORM_POSIX
+        help
+            Board Platform is running the Linux operating system
+
+    config BOARD_TOOLCHAIN
+        string "Toolchain"
+        default ""
+
+    config BOARD_ARCHITECTURE
+        string "Architecture"
+        default ""
+
+    config BOARD_FULL_OPTIMIZATION
+        bool "Full optmization (O3)"
+        default n
+        help
+            Enables Cmake Release for -O3 optimization
+
+    config BOARD_ROMFSROOT
+        string "ROMFSROOT"
+        default "px4fmu_common"
+        help
+            relative path to the ROMFS root directory
+
+    config BOARD_BUILD_BOOTLOADER
+        bool "Enable bootloader"
+        help
+            flag to enable building and including the bootloader config
+
+    config BOARD_IO
+        string "IO board name"
+        help
+            name of IO board to be built and included in the ROMFS (requires a valid ROMFSROOT)
+
+    config BOARD_CONSTRAINED_FLASH
+        bool "Contrained flash"
+        help
+            flag to enable constrained flash options (eg limit init script status text)
+
+    config BOARD_NO_HELP
+        bool "No help"
+        help
+            optional condition flag to disable help text on constrained flash systems
+
+    config BOARD_CONSTRAINED_MEMORY
+        bool "Contrained memory"
+        help
+            flag to enable constrained memory options (eg limit maximum number of uORB publications)
+
+    config BOARD_EXTERNAL_METADATA
+        bool "External metadata"
+        help
+            flag to exclude metadata to reduce flash
+
+    config BOARD_LINKER_PREFIX
+        string "linker prefix"
+        help
+            optional to prefix on the Linker script.
+
+    config BOARD_COMPILE_DEFINITIONS
+        string "add custom compile definitions"
+        help
+            add custom compile defitions to this specific target
+endmenu #Toolchain
+
+config BOARD_TESTING
+    bool "Testing"
+    select SYSTEMCMDS_TESTS
+    help
+        flag to enable automatic inclusion of PX4 testing modules
+
+
+config BOARD_ETHERNET
+    bool "Ethernet"
+    help
+        flag to indicate that ethernet is enabled
+
+config BOARD_CRYPTO
+    string "Crypto"
+    help
+        Crypto implementation selection
+
+config BOARD_KEYSTORE
+    string "Keystore"
+    help
+        Keystore implememntation selection
+
+menu "Serial ports"
+
+    config BOARD_SERIAL_GPS1
+        string "GPS1 tty port"
+
+    config BOARD_SERIAL_GPS2
+        string "GPS2 tty port"
+
+    config BOARD_SERIAL_GPS3
+        string "GPS3 tty port"
+
+    config BOARD_SERIAL_GPS4
+        string "GPS4 tty port"
+
+    config BOARD_SERIAL_GPS5
+        string "GPS5 tty port"
+
+    config BOARD_SERIAL_TEL1
+        string "TEL1 tty port"
+
+    config BOARD_SERIAL_TEL2
+        string "TEL2 tty port"
+
+    config BOARD_SERIAL_TEL3
+        string "TEL3 tty port"
+
+    config BOARD_SERIAL_TEL4
+        string "TEL4 tty port"
+
+    config BOARD_SERIAL_TEL5
+        string "TEL5 tty port"
+
+    config BOARD_SERIAL_WIFI
+        string "WIFI tty port"
+endmenu
+
+menu "drivers"
+source "src/drivers/Kconfig"
+endmenu
+
+menu "modules"
+source "src/modules/Kconfig"
+endmenu
+
+menu "systemcmds"
+source "src/systemcmds/Kconfig"
+endmenu
+
+menu "examples"
+source "src/examples/Kconfig"
+endmenu

Makefile

@@ -213,8 +213,8 @@ define colorecho
 +@echo -e '${COLOR_BLUE}${1} ${NO_COLOR}'
 endef
 
-# Get a list of all config targets boards/*/*.cmake
-ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 ! -name '*common*' ! -name '*sdflight*' -name '*.cmake' -print | sed -e 's|boards\/||' | sed -e 's|\.cmake||' | sed -e 's|\/|_|g' | sort)
+# Get a list of all config targets boards/*/*.px4board
+ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4board' -print | sed -e 's|boards\/||' | sed -e 's|\.px4board||' | sed -e 's|\/|_|g' | sort)
 
 # ADD CONFIGS HERE
 # --------------------------------------------------------------------
@@ -232,6 +232,9 @@ $(CONFIG_TARGETS_DEFAULT):
 all_config_targets: $(ALL_CONFIG_TARGETS)
 all_default_targets: $(CONFIG_TARGETS_DEFAULT)
 
+updateconfig:
+	@./Tools/kconfig/updateconfig.py
+
 # board reorganization deprecation warnings (2018-11-22)
 define deprecation_warning
 	$(warning $(1) has been deprecated and will be removed, please use $(2)!)
@@ -240,16 +243,6 @@ endef
 # All targets with just dependencies but no recipe must either be marked as phony (or have the special @: as recipe).
 .PHONY: all px4_sitl_default all_config_targets all_default_targets
 
-# Multi- config targets.
-eagle_default: atlflight_eagle_default atlflight_eagle_qurt
-eagle_rtps: atlflight_eagle_rtps atlflight_eagle_qurt-rtps
-
-excelsior_default: atlflight_excelsior_default atlflight_excelsior_qurt
-excelsior_rtps: atlflight_excelsior_rtps atlflight_excelsior_qurt-rtps
-
-.PHONY: eagle_default eagle_rtps
-.PHONY: excelsior_default excelsior_rtps
-
 # Other targets
 # --------------------------------------------------------------------
 
@@ -309,9 +302,11 @@ all_variants_%:
 	$(foreach a,$(filter $(subst all_variants_,,$@)_%, $(ALL_CONFIG_TARGETS)), $(call cmake-build,$(a)$(BUILD_DIR_SUFFIX)))
 
 uorb_graphs:
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --merge-depends --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib/parameters --exclude-path src/modules/mavlink --merge-depends --file Tools/uorb_graph/graph_full_no_mavlink
 	@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
 	@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
+	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph
 
 
@@ -489,6 +484,7 @@ submodulesupdate:
 	@git submodule update --quiet --init --recursive --jobs 4 || true
 	@git submodule sync --recursive
 	@git submodule update --init --recursive --jobs 4
+	@git fetch --all --tags --recurse-submodules=yes --jobs=4
 
 gazeboclean:
 	@rm -rf ~/.gazebo/*
@@ -498,7 +494,7 @@ distclean: gazeboclean
 	@rm -rf "$(SRC_DIR)/build"
 	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
 
-# Help / Error
+# Help / Error / Misc
 # --------------------------------------------------------------------
 
 # All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
@@ -512,7 +508,7 @@ help:
 	@echo "Where <target> is one of:"
 	@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
 		awk -v RS= -F: '/^# File/,/^# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
-		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(posix|eagle|Makefile)'
+		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
 	@echo
 	@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"
 	@echo "Use '$(MAKE) list_config_targets' for a list of configuration targets."
@@ -532,3 +528,18 @@ check_px4: $(call make_list,nuttx,"px4") \
 
 check_nxp: $(call make_list,nuttx,"nxp") \
 	sizes
+
+ifneq ($(ROS2_WS_DIR),)
+  ROS2_WS_DIR := $(basename ${ROS2_WS_DIR})
+else
+  ROS2_WS_DIR := ~/colcon_ws
+endif
+
+update_ros2_bridge:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --all
+
+update_px4_ros_com:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_ros_com
+
+update_px4_msgs:
+	@Tools/update_px4_ros2_bridge.sh --ws_dir ${ROS2_WS_DIR} --px4_msgs

README.md

@@ -4,11 +4,11 @@
 
 [![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
 
-[![Slack](https://px4-slack.herokuapp.com/badge.svg)](http://slack.px4.io)
+[![Slack](/.github/slack.svg)](https://join.slack.com/t/px4/shared_invite/zt-si4xo5qs-R4baYFmMjlrT4rQK5yUnaA)
 
 This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/master/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.
 
-PX4 is highly portable, OS-independent and supports Linux, NuttX and QuRT out of the box.
+PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box.
 
 * Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/master/LICENSE))
 * [Supported airframes](https://docs.px4.io/master/en/airframes/airframe_reference.html) ([portfolio](http://px4.io/#airframes)):

ROMFS/CMakeLists.txt

@@ -120,6 +120,7 @@ add_custom_command(
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_extract_stamp}
 	WORKING_DIRECTORY ${romfs_gen_root_dir}
 	DEPENDS ${romfs_tar_file}
+	VERBATIM
 	)
 
 add_custom_command(

ROMFS/cannode/init.d/rcS

@@ -15,15 +15,6 @@ set +e
 #
 #------------------------------------------------------------------------------
 set R /
-#
-# Mount the procfs.
-#
-mount -t procfs /proc
-
-#
-# Start CDC/ACM serial driver.
-#
-sercon
 
 #
 # Print full system version.

ROMFS/px4fmu_common/init.d-posix/CMakeLists.txt

@@ -34,9 +34,10 @@
 add_subdirectory(airframes)
 
 px4_add_romfs_files(
-	px4-rc.params
-	px4-rc.simulator
 	px4-rc.mavlink
+	px4-rc.params
+	px4-rc.rtps
+	px4-rc.simulator
 	rc.replay
 	rcS
 )

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -7,6 +7,5 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-param set-default EKF2_RNG_AID 1
 param set-default EKF2_RNG_A_HMAX 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1014_solo

@@ -8,6 +8,6 @@
 . ${R}etc/init.d/rc.mc_defaults
 
 param set-default MC_PITCHRATE_P 0.1
-param set-default MC_ROLLRATE_P 0.1
+param set-default MC_ROLLRATE_P 0.05
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1020_uuv_generic

@@ -6,13 +6,10 @@
 . ${R}etc/init.d/rc.uuv_defaults
 
 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0
 
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
-#param set CBRK_GPSFAIL 240024
-
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}
 

ROMFS/px4fmu_common/init.d-posix/airframes/1021_uuv_hippocampus

@@ -6,13 +6,10 @@
 . ${R}etc/init.d/rc.uuv_defaults
 
 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0
 
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
-#param set CBRK_GPSFAIL 240024
-
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}
 

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -6,7 +6,6 @@
 . ${R}etc/init.d/rc.uuv_defaults
 
 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0
 
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -5,8 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
@@ -18,7 +16,6 @@ param set-default FW_L1_PERIOD 12
 
 param set-default FW_MAN_P_MAX 30
 
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
@@ -46,7 +43,6 @@ param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1033_rascal

@@ -5,9 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15
 
 param set-default FW_L1_PERIOD 25
 
-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,19 +34,12 @@ param set-default MIS_DIST_WPS 10000
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 
-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set FW_THR_SLEW_MAX 0.3
-
 param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_MAX_ROLL 10
 
-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set-default RWTO_MAX_THR 0.6
-
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -5,9 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15
 
 param set-default FW_L1_PERIOD 25
 
-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,19 +34,12 @@ param set-default MIS_DIST_WPS 10000
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 
-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set FW_THR_SLEW_MAX 0.3
-
 param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_MAX_ROLL 10
 
-# fix takeoff failure for JSBsim in autonomous mission mode.
-#param set RWTO_MAX_THR 0.6
-
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 

ROMFS/px4fmu_common/init.d-posix/airframes/1035_techpod

@@ -5,8 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
@@ -35,7 +33,6 @@ param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -5,9 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15
 
 param set-default FW_L1_PERIOD 25
 
-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,7 +34,6 @@ param set-default MIS_DIST_WPS 10000
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 param set-default RWTO_MAX_PITCH 20

ROMFS/px4fmu_common/init.d-posix/airframes/1037_believer

@@ -5,8 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
@@ -18,7 +16,6 @@ param set-default FW_L1_PERIOD 12
 
 param set-default FW_MAN_P_MAX 30
 
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
@@ -46,7 +43,6 @@ param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50
 
 param set-default RWTO_TKOFF 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32

ROMFS/px4fmu_common/init.d-posix/airframes/17001_tf-g1

@@ -12,21 +12,12 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_AIRSPD_STALL 8
 
 param set-default FW_P_RMAX_NEG 20.0
-param set-default FW_P_RMAX_POS 60.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1
 
-param set-default FW_PR_IMAX 0.4
-param set-default FW_R_TC 0.4
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_I 0.1
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.08
 
 param set-default MIS_LTRMIN_ALT 50
@@ -42,7 +33,6 @@ param set-default FW_ARSP_SCALE_EN 0
 
 param set-default FW_AIRSPD_MAX 35
 param set-default FW_AIRSPD_MIN 7
-param set-default FW_AIRSPD_TRIM 15
 
 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5

ROMFS/px4fmu_common/init.d-posix/airframes/3011_hexarotor_x

@@ -12,7 +12,6 @@
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLL_P 6.0
 param set-default MPC_XY_VEL_I_ACC 4

ROMFS/px4fmu_common/init.d-posix/px4-rc.params

@@ -1,5 +1,5 @@
 #!/bin/sh
 # shellcheck disable=SC2154
 
-#param set MAV_SYS_ID $((px4_instance+1))
-#param set IMU_INTEG_RATE 250
+#param set-default MAV_SYS_ID $((px4_instance+1))
+#param set-default IMU_INTEG_RATE 250

ROMFS/px4fmu_common/init.d-posix/px4-rc.rtps

@@ -0,0 +1,4 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -21,8 +21,6 @@ then
 fi
 
 # initialize script variables
-set AUX_MODE                    none
-set AUX_BANK2			none
 set IO_PRESENT                  no
 set MAV_TYPE                    none
 set MIXER                       none
@@ -122,8 +120,6 @@ then
 
 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
-
-	param set SYS_RESTART_TYPE 2
 fi
 
 param set-default BAT1_N_CELLS 4
@@ -228,8 +224,7 @@ navigator start
 # Try to start the micrortps_client with UDP transport if module exists
 if px4-micrortps_client status > /dev/null 2>&1
 then
-	# shellcheck disable=SC2154
-	micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))
+	. px4-rc.rtps
 fi
 
 if param greater -s MNT_MODE_IN -1

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -42,7 +42,6 @@ px4_add_romfs_files(
 	rc.fw_apps
 	rc.fw_defaults
 	rc.interface
-	rc.io
 	rc.logging
 	rc.mc_apps
 	rc.mc_defaults

ROMFS/px4fmu_common/init.d/airframes/1000_rc_fw_easystar.hil

@@ -30,17 +30,12 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0
 param set-default FW_PR_FF 0.35
-param set-default FW_PR_I 0.1
-param set-default FW_PR_IMAX 0.4
 param set-default FW_PR_P 0.2
 param set-default FW_RR_FF 0.6
-param set-default FW_RR_I 0.1
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.3
 
 param set-default RWTO_TKOFF 1

ROMFS/px4fmu_common/init.d/airframes/10015_tbs_discovery

@@ -25,19 +25,14 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.1
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.0017
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0.14
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.0025
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.28
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
+
 set MIXER quad_w
 
 set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/10016_3dr_iris

@@ -26,17 +26,14 @@
 
 # TODO tune roll/pitch separately
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 2.5
 param set-default MC_YAWRATE_P 0.25
 param set-default MC_YAWRATE_I 0.25
-param set-default MC_YAWRATE_D 0
 
 param set-default BAT1_V_DIV 12.27559
 param set-default BAT1_A_PER_V 15.39103

ROMFS/px4fmu_common/init.d/airframes/10017_steadidrone_qu4d

@@ -37,9 +37,6 @@ param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 4
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
 set MIXER quad_w
 
 set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/10018_tbs_endurance

@@ -32,15 +32,10 @@ param set-default BAT1_V_EMPTY 3.5
 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.08
 param set-default MC_ROLLRATE_I 0.02
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.13
 param set-default MC_PITCHRATE_I 0.02
 param set-default MC_PITCHRATE_D 0.005
-param set-default MC_YAW_P 2.8
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
 
 param set-default MPC_XY_VEL_MAX 2
 

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -18,10 +18,8 @@ param set-default BAT1_N_CELLS 3
 
 param set-default COM_RC_IN_MODE 1
 
-param set-default EKF2_AID_MASK 1
 param set-default EKF2_ANGERR_INIT 0.01
 param set-default EKF2_GBIAS_INIT 0.01
-param set-default EKF2_HGT_MODE 0
 param set-default EKF2_MAG_TYPE 1
 
 param set-default FW_AIRSPD_MAX 25
@@ -56,7 +54,6 @@ param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
 
 param set-default SDLOG_DIRS_MAX 7
-param set-default SYS_RESTART_TYPE 2
 
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_MOT_ID 1234

ROMFS/px4fmu_common/init.d/airframes/11001_hexa_cox

@@ -19,6 +19,7 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v2 exclude
 #
 
 . ${R}etc/init.d/rc.mc_defaults

ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil

@@ -26,3 +26,5 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027
+
+param set SIH_VEHICLE_TYPE 0

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name SIH plane AERT
+#
+# @type Simulation
+# @class Plane
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER AERT
+set PWM_OUT 1234
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+param set-default SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 6.0
+param set SIH_MASS 0.3
+param set SIH_IXX 0.00402
+param set SIH_IYY 0.0144
+param set SIH_IZZ 0.0177
+param set SIH_IXZ 0.00046
+param set SIH_KDV 0.2
+
+param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing

ROMFS/px4fmu_common/init.d/airframes/12002_steadidrone_mavrik

@@ -36,9 +36,6 @@ param set-default MC_ROLLRATE_D 0.009
 param set-default MC_ROLLRATE_MAX 180
 
 param set-default MC_YAW_P 3
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
 
 param set-default MPC_HOLD_MAX_XY 0.25
 param set-default MPC_THR_MIN 0.15

ROMFS/px4fmu_common/init.d/airframes/13000_generic_vtol_standard

@@ -25,7 +25,6 @@
 
 
 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234

ROMFS/px4fmu_common/init.d/airframes/13001_caipirinha_vtol

@@ -24,20 +24,14 @@ param set-default MAV_TYPE 19
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.12
 param set-default MC_ROLLRATE_I 0.002
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
 
 param set-default MC_PITCH_P 4.5
 param set-default MC_PITCHRATE_P 0.3
 param set-default MC_PITCHRATE_I 0.002
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
 
 param set-default MC_YAW_P 3.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_ELEV_MC_LOCK 0

ROMFS/px4fmu_common/init.d/airframes/13002_firefly6

@@ -28,19 +28,13 @@ param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.19
 param set-default MC_ROLLRATE_I 0.002
 param set-default MC_ROLLRATE_D 0.005
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.14
 param set-default MC_PITCHRATE_I 0.002
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 4
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
-
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_FW_MOT_OFFID 34
 param set-default VT_IDLE_PWM_MC 1080

ROMFS/px4fmu_common/init.d/airframes/13003_quad_tailsitter

@@ -15,12 +15,10 @@
 
 
 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_MOT_ID 1234
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
-param set-default VT_ELEV_MC_LOCK 1
 set MAV_TYPE 20
 
 set MIXER quad_x_vtol

ROMFS/px4fmu_common/init.d/airframes/13004_quad+_tailsitter

@@ -24,11 +24,9 @@
 
 
 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
-param set-default VT_ELEV_MC_LOCK 1
 set MAV_TYPE 20
 
 set MIXER quad_+_vtol

ROMFS/px4fmu_common/init.d/airframes/13005_vtol_AAERT_quad

@@ -26,35 +26,24 @@
 
 param set-default PWM_AUX_DIS5 950
 
-param set-default PWM_MAIN_RATE 400
 
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.002
 param set-default MC_ROLLRATE_D 0.004
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 6
 param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.002
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40
 
 param set-default MPC_YAWRAUTO_MAX 40
 
-param set-default FW_PR_FF 0.5
 param set-default FW_PR_I 0.02
-param set-default FW_PR_IMAX 0.4
-param set-default FW_PR_P 0.08
 param set-default FW_RR_FF 0.6
 param set-default FW_RR_I 0.01
-param set-default FW_RR_IMAX 0.2
-param set-default FW_RR_P 0.05
 param set-default FW_THR_CRUISE 0.75
 
 param set-default VT_ARSP_BLEND 6

ROMFS/px4fmu_common/init.d/airframes/13006_vtol_standard_delta

@@ -22,21 +22,11 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 
-param set-default MC_ROLL_P 6.5
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.01
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
-param set-default MC_PITCH_P 6.5
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.01
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 3.5
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
+
+
 param set-default MC_YAWRATE_MAX 50
 
 param set-default MPC_XY_P 0.8
@@ -45,7 +35,6 @@ param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_YAWRAUTO_MAX 20
 
 param set-default PWM_AUX_DIS3 950
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234

ROMFS/px4fmu_common/init.d/airframes/13007_vtol_AAVVT_quad

@@ -15,26 +15,17 @@
 
 
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.002
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.12
 param set-default MC_PITCHRATE_I 0.002
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40
 
 param set-default MPC_YAWRAUTO_MAX 40
 
 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_MOT_ID 1234

ROMFS/px4fmu_common/init.d/airframes/13008_QuadRanger

@@ -15,44 +15,32 @@
 
 
 param set-default FW_THR_CRUISE 65
-param set-default FW_PR_P 0.08
-param set-default FW_PR_FF 0.5
-param set-default FW_RR_P 0.05
 param set-default FW_RR_FF 0.6
 
 param set-default MIS_YAW_TMT 10
 
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.004
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 3.5
 param set-default MC_YAWRATE_P 0.6
 param set-default MC_YAWRATE_I 0.04
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40
 
 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_Z_VEL_MAX_DN 1.5
-param set-default MPC_TKO_SPEED 1.5
 param set-default MPC_LAND_SPEED 0.8
 param set-default MPC_YAWRAUTO_MAX 40
 
 param set-default PWM_AUX_DIS5 950
 param set-default PWM_AUX_REV1 1
 param set-default PWM_AUX_REV2 1
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_ARSP_TRANS 15
 param set-default VT_ARSP_BLEND 8
-param set-default VT_B_TRANS_DUR 4
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_MOT_ID 1234

ROMFS/px4fmu_common/init.d/airframes/13009_vtol_spt_ranger

@@ -68,10 +68,8 @@ param set-default PWM_AUX_REV4    1
 
 param set-default PWM_AUX_DIS5 950
 
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_ARSP_TRANS   15
-param set-default VT_B_TRANS_DUR  4
 param set-default VT_F_TRANS_THR    0.6
 param set-default VT_IDLE_PWM_MC 1180
 param set-default VT_MOT_ID 1234

ROMFS/px4fmu_common/init.d/airframes/13010_claire

@@ -20,7 +20,6 @@ param set-default PWM_AUX_MIN 1000
 param set-default PWM_AUX_RATE 50
 
 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 13

ROMFS/px4fmu_common/init.d/airframes/13012_convergence

@@ -32,22 +32,14 @@ param set-default FW_MAN_R_MAX 50
 param set-default FW_ACRO_X_MAX   270
 param set-default FW_ACRO_Y_MAX   270
 param set-default FW_ACRO_Z_MAX   180
-param set-default FW_PR_FF    0.5
-param set-default FW_PR_P 0.08
 param set-default FW_PSP_OFF  5
 param set-default FW_P_LIM_MAX    30
 param set-default FW_P_LIM_MIN    -30
-param set-default FW_P_RMAX_NEG   60
-param set-default FW_P_RMAX_POS   60
 param set-default FW_RR_FF    0.33
 param set-default FW_RR_P 0.11
-param set-default FW_YR_FF    0.3
-param set-default FW_YR_P 0.05
 
-param set-default MC_PITCHRATE_D  0.003
 param set-default MC_PITCHRATE_P  0.15
 param set-default MC_PITCH_P  6
-param set-default MC_ROLLRATE_D   0.003
 param set-default MC_ROLLRATE_P   0.15
 param set-default MC_ROLL_P   6
 param set-default MC_YAWRATE_MAX  120
@@ -57,9 +49,6 @@ param set-default MC_YAW_P    2.5
 param set-default MC_YAWRATE_P 0.3
 param set-default MPC_LAND_SPEED 1.2
 param set-default MPC_TKO_SPEED 2.5
-param set-default MPC_Z_VEL_MAX_UP 3
-
-param set-default PWM_MAIN_RATE 400
 
 param set-default SENS_BOARD_ROT 8
 
@@ -69,11 +58,8 @@ param set-default VT_F_TR_OL_TM   4
 param set-default VT_FW_DIFTHR_EN 1
 param set-default VT_FW_DIFTHR_SC 0.17
 param set-default VT_FW_MOT_OFFID 3
-param set-default VT_FW_PERM_STAB 0
 param set-default VT_IDLE_PWM_MC 1200
 param set-default VT_MOT_ID 123
-param set-default VT_TILT_FW  1
-param set-default VT_TILT_MC  0
 param set-default VT_TILT_TRANS   0.45
 param set-default VT_TRANS_MIN_TM 1.2
 param set-default VT_TRANS_P2_DUR 1.3

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -69,23 +69,13 @@ param set-default LNDMC_ALT_MAX 9999
 param set-default LNDMC_XY_VEL_MAX 1
 param set-default LNDMC_Z_VEL_MAX 0.7
 
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.16
 param set-default MC_ROLLRATE_I 0.01
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_ROLLRATE_MAX 80
-param set-default MC_PITCH_P 6.5
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_PITCHRATE_MAX 80
 param set-default MC_YAW_P 3.5
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
+
 param set-default MC_YAWRATE_MAX 20
 param set-default MC_AIRMODE 1
 
@@ -109,7 +99,6 @@ param set-default MPC_TILTMAX_AIR 25
 param set-default MPC_TILTMAX_LND 25
 param set-default MPC_YAWRAUTO_MAX 20
 
-param set-default NAV_DLL_ACT 0
 param set-default NAV_LOITER_RAD 100
 
 param set-default PWM_AUX_DISARM 950
@@ -119,7 +108,6 @@ param set-default PWM_MAIN_DIS6 1500
 param set-default PWM_MAIN_DIS7 900
 param set-default PWM_MAIN_DIS8 900
 
-param set-default PWM_MAIN_RATE 400
 
 param set-default SENS_BOARD_ROT 18
 
@@ -133,13 +121,11 @@ param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_F_TRANS_THR 1
-param set-default VT_DWN_PITCH_MAX 8
+param set-default VT_PITCH_MIN 8
 param set-default VT_FW_QC_P 55
 param set-default VT_FW_QC_R 55
 param set-default VT_TRANS_MIN_TM 15
 param set-default VT_B_TRANS_DUR 8
-param set-default VT_WV_LND_EN 1
-param set-default VT_WV_LTR_EN 1
 param set-default VT_FWD_THRUST_SC 4
 param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -29,14 +29,11 @@ param set-default FW_AIRSPD_MAX 30
 param set-default FW_AIRSPD_MIN 19
 param set-default FW_AIRSPD_TRIM 23
 param set-default FW_L1_R_SLEW_MAX 40
-param set-default FW_LND_EARLYCFG 1
 param set-default FW_MAN_P_MAX 30
-param set-default FW_PR_I 0.1
 param set-default FW_PSP_OFF 3
 param set-default FW_P_LIM_MAX 18
 param set-default FW_P_LIM_MIN -25
 param set-default FW_RLL_TO_YAW_FF 0.1
-param set-default FW_RR_I 0.1
 param set-default FW_RR_P 0.08
 param set-default FW_R_LIM 45
 param set-default FW_R_RMAX 50
@@ -46,22 +43,15 @@ param set-default FW_THR_SLEW_MAX 0.6
 param set-default FW_T_HRATE_FF 0
 param set-default FW_T_SINK_MAX 15
 param set-default FW_T_SINK_MIN 3
-param set-default FW_YR_I 0.1
 param set-default FW_YR_P 0.15
 
-param set-default IMU_GYRO_CUTOFF 40
-
 param set-default IMU_DGYRO_CUTOFF 15
-param set-default MC_PITCHRATE_I 0.2
 param set-default MC_PITCHRATE_MAX 60
-param set-default MC_ROLLRATE_I 0.2
 param set-default MC_ROLLRATE_MAX 60
 param set-default MC_YAWRATE_I 0.15
 param set-default MC_YAWRATE_MAX 40
 param set-default MC_YAWRATE_P 0.3
 
-param set-default MIS_TAKEOFF_ALT 30
-
 param set-default MPC_ACC_DOWN_MAX 2
 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_ACC_UP_MAX 3

ROMFS/px4fmu_common/init.d/airframes/13030_generic_vtol_quad_tiltrotor

@@ -27,7 +27,6 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1

ROMFS/px4fmu_common/init.d/airframes/13050_generic_vtol_octo

@@ -27,7 +27,6 @@
 
 
 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400
 
 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 12345678

ROMFS/px4fmu_common/init.d/airframes/15001_coax_heli

@@ -20,28 +20,19 @@
 set MIXER coax
 
 
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.005
-param set-default MC_ROLLRATE_FF 0
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0.17
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.005
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 2
 param set-default MC_YAWRATE_P 0.1
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 
 param set-default NAV_ACC_RAD 2
 
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_DISARM 900
-param set-default PWM_MAIN_MIN 1075
-param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_RATE 400
 
 param set-default RTL_RETURN_ALT 30

ROMFS/px4fmu_common/init.d/airframes/16001_helicopter

@@ -36,7 +36,6 @@ param set-default MC_ROLLRATE_P 0
 param set-default MC_ROLLRATE_I 0
 param set-default MC_ROLLRATE_D 0
 param set-default MC_ROLLRATE_FF 0.15
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0
 param set-default MC_PITCHRATE_I 0
 param set-default MC_PITCHRATE_D 0
@@ -44,7 +43,6 @@ param set-default MC_PITCHRATE_FF 0.15
 param set-default MC_YAW_P 3
 param set-default MC_YAWRATE_P 0.1
 param set-default MC_YAWRATE_I 0
-param set-default MC_YAWRATE_D 0
 param set-default MC_ROLLRATE_MAX 720
 param set-default MC_PITCHRATE_MAX 720
 param set-default MC_YAWRATE_MAX 400

ROMFS/px4fmu_common/init.d/airframes/17003_TF-G2

@@ -21,8 +21,8 @@
 . ${R}etc/init.d/rc.fw_defaults
 
 
-param set-default BAT_CAPACITY 3300
-param set-default BAT_N_CELLS 3
+param set-default BAT1_CAPACITY 3300
+param set-default BAT1_N_CELLS 3
 
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_RATE 50

ROMFS/px4fmu_common/init.d/airframes/18001_TF-B1

@@ -25,8 +25,8 @@ param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600
 
-param set-default SENS_BOARD_ROT 0
-        param set MAV_TYPE 8  # MAV_TYPE_FREE_BALLOON
+set MAV_TYPE 8
+param set MAV_TYPE ${MAV_TYPE}
 
 
 set MIXER IO_pass

ROMFS/px4fmu_common/init.d/airframes/2105_maja

@@ -25,10 +25,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55

ROMFS/px4fmu_common/init.d/airframes/2106_albatross

@@ -25,10 +25,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55

ROMFS/px4fmu_common/init.d/airframes/2200_mini_talon

@@ -26,10 +26,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55

ROMFS/px4fmu_common/init.d/airframes/24001_dodeca_cox

@@ -23,6 +23,7 @@
 # @maintainer William Peale <develop707@gmail.com>
 #
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v2 exclude
 #
 
 set VEHICLE_TYPE mc
@@ -35,8 +36,6 @@ param set-default PWM_AUX_DISARM 900
 param set-default PWM_AUX_MIN 1075
 param set-default PWM_AUX_MAX 1950
 
-param set-default PWM_MAIN_MIN 1075
-param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_RATE 400
 
 param set-default RTL_DESCEND_ALT 10

ROMFS/px4fmu_common/init.d/airframes/3030_io_camflyer

@@ -22,7 +22,6 @@
 . ${R}etc/init.d/rc.fw_defaults
 
 param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_MIN 10
 param set-default FW_AIRSPD_TRIM 13
 param set-default FW_R_TC 0.3
 param set-default FW_P_TC 0.3
@@ -30,15 +29,11 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0
 param set-default FW_PR_FF 0.35
-param set-default FW_PR_IMAX 0.4
-param set-default FW_PR_P 0.08
 param set-default FW_RR_FF 0.6
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.04
 
 param set-default PWM_MAIN_DISARM 1000

ROMFS/px4fmu_common/init.d/airframes/3031_phantom

@@ -24,20 +24,15 @@
 . ${R}etc/init.d/rc.fw_defaults
 
 param set-default FW_AIRSPD_MIN 13
-param set-default FW_AIRSPD_TRIM 15
 param set-default FW_AIRSPD_MAX 25
 param set-default FW_R_TC 0.3
 param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.75
 param set-default FW_L1_PERIOD 15
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_IMAX 0.2
 param set-default FW_PR_P 0.03
 param set-default FW_P_LIM_MAX 50
 param set-default FW_P_LIM_MIN -50
-param set-default FW_P_ROLLFF 1
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.08
 param set-default FW_R_LIM 50
 param set-default FW_R_RMAX 50

ROMFS/px4fmu_common/init.d/airframes/3032_skywalker_x5

@@ -30,7 +30,6 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0

ROMFS/px4fmu_common/init.d/airframes/3033_wingwing

@@ -25,7 +25,6 @@
 
 param set-default BAT1_N_CELLS 2
 param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_MIN 10
 param set-default FW_AIRSPD_TRIM 13
 param set-default FW_R_TC 0.3
 param set-default FW_P_TC 0.3
@@ -33,7 +32,6 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0

ROMFS/px4fmu_common/init.d/airframes/3034_fx79

@@ -23,7 +23,6 @@
 
 param set-default FW_AIRSPD_MAX 30
 param set-default FW_AIRSPD_MIN 13
-param set-default FW_AIRSPD_TRIM 15
 
 param set-default NAV_LOITER_RAD 150
 

ROMFS/px4fmu_common/init.d/airframes/3036_pigeon

@@ -27,17 +27,11 @@ param set-default FW_AIRSPD_MIN 15
 param set-default FW_AIRSPD_TRIM 20
 param set-default FW_AIRSPD_MAX 27
 param set-default FW_ATT_TC 0.3
-param set-default FW_L1_DAMPING 0.75
-param set-default FW_L1_PERIOD 20
 param set-default FW_PR_FF 0.35
 param set-default FW_PR_IMAX 0.2
 param set-default FW_PR_P 0.05
-param set-default FW_P_LIM_MAX 45
-param set-default FW_P_LIM_MIN -45
-param set-default FW_P_ROLLFF 1
 param set-default FW_P_TC 0.3
 param set-default FW_RR_FF 0.3
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.03
 param set-default FW_R_LIM 40
 param set-default FW_R_RMAX 50

ROMFS/px4fmu_common/init.d/airframes/3037_parrot_disco_mod

@@ -26,38 +26,15 @@
 ####################################
 # Airspeed
 ####################################
-param set-default FW_AIRSPD_MIN  15 # = 29 knots
-param set-default FW_AIRSPD_TRIM 20 # = 39 knots
 param set-default FW_AIRSPD_MAX  27 # = 52 knots
 
-####################################
-# The Main L1 Controller
-####################################
-param set-default FW_L1_PERIOD 20 #units of meters
-
-# Damping factor for L1 control (def = 0.75)
-param set-default FW_L1_DAMPING 0.75
-
 ####################################
 # Pitch
 ####################################
 
-# Basic limits (def = +/- 45 deg)
-param set-default FW_P_LIM_MAX  45
-param set-default FW_P_LIM_MIN -45
-
-# Time Constant (def = 0.4s)
-param set-default FW_P_TC 0.4
-
 # Pitch rate feed forward (def = 0.5 %/rad/sec)
 param set-default FW_PR_FF 0.35
 
-# Pitch rate integrator limit (def = 0.4)
-param set-default FW_PR_IMAX 0.4
-
-# Pitch rate proportional gain (def = 0.08 %/rad/sec)
-param set-default FW_PR_P 0.08
-
 ####################################
 # Roll
 ####################################
@@ -68,21 +45,8 @@ param set-default FW_R_LIM 40
 # Roll rate upper limit (def = 70 deg/s)
 param set-default FW_R_RMAX 50
 
-# Roll Time Constant (def = 0.4 s)
-param set-default FW_R_TC 0.4
-
-# Roll rate feed forward (def = 0.5 %/rad/sec)
-param set-default FW_RR_FF 0.5
-
-# Roll rate proportional Gain (def = 0.05 %/rad/sec)
-param set-default FW_RR_P 0.05
-
-# Roll Integrator Anti-Windup
-param set-default FW_RR_IMAX 0.2
-
 param set-default PWM_MAIN_DISARM 1000
 
-
 set MIXER fw_generic_wing.main.mix
 
 # Provide ESC a constant 1000 us pulse

ROMFS/px4fmu_common/init.d/airframes/3100_tbs_caipirinha

@@ -25,24 +25,18 @@
 param set-default FW_AIRSPD_MAX 25
 param set-default FW_AIRSPD_MIN 12.5
 param set-default FW_AIRSPD_TRIM 16.5
-param set-default FW_L1_DAMPING 0.75
 param set-default FW_L1_PERIOD 15
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 8
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 10
 param set-default FW_THR_LND_MAX 0
 param set-default FW_P_LIM_MAX 20
 param set-default FW_P_LIM_MIN -30
 param set-default FW_R_LIM 45
-param set-default FW_R_TC 0.4
-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.45
-param set-default FW_PR_IMAX 0.4
 param set-default FW_PR_P 0.005
 param set-default FW_RR_FF 0.45
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.013
 param set-default FW_P_RMAX_NEG 70
 param set-default FW_P_RMAX_POS 70

ROMFS/px4fmu_common/init.d/airframes/4003_qavr5

@@ -20,15 +20,9 @@ set PWM_OUT 1234
 param set-default MC_ROLL_P 8
 param set-default MC_ROLLRATE_P 0.08
 param set-default MC_ROLLRATE_I 0.16
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 8
 param set-default MC_PITCHRATE_P 0.1
-param set-default MC_PITCHRATE_I 0.2
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.15
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
 
 param set-default MPC_THR_MIN 0.06
 param set-default MPC_MANTHR_MIN 0.06

ROMFS/px4fmu_common/init.d/airframes/4009_qav250

@@ -33,7 +33,6 @@ param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 4
 param set-default MC_YAWRATE_P 0.3
 param set-default MC_YAWRATE_I 0.2
-param set-default MC_YAWRATE_D 0
 param set-default MPC_THR_MIN 0.06
 
 param set-default PWM_MAIN_MIN 1075

ROMFS/px4fmu_common/init.d/airframes/4010_dji_f330

@@ -6,6 +6,7 @@
 # @class Copter
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
 #
 
 . ${R}etc/init.d/rc.mc_defaults
@@ -14,17 +15,10 @@ set MIXER quad_x
 set PWM_OUT 1234
 
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_YAW_P 2.8
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
+
 
 # DJI ESCs do not support calibration and need a higher min
 param set-default PWM_MAIN_MIN 1230

ROMFS/px4fmu_common/init.d/airframes/4011_dji_f450

@@ -14,17 +14,10 @@ set MIXER quad_x
 set PWM_OUT 1234
 
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.3
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
 
 # DJI ESCs do not support calibration and need a higher min
 param set-default PWM_MAIN_MIN 1230

ROMFS/px4fmu_common/init.d/airframes/4014_s500

@@ -21,5 +21,3 @@ param set-default MC_ROLLRATE_P 0.18
 param set-default MC_PITCHRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_I 0.15
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_PITCHRATE_D 0.003

ROMFS/px4fmu_common/init.d/airframes/4015_holybro_s500

@@ -18,7 +18,6 @@ set PWM_OUT 1234
 
 
 param set-default IMU_GYRO_CUTOFF 30
-param set-default IMU_DGYRO_CUTOFF 30
 
 param set-default MC_ROLLRATE_P 0.14
 param set-default MC_PITCHRATE_P 0.14

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -33,7 +33,6 @@ param set-default EKF2_AID_MASK 35
 param set-default EKF2_IMU_POS_X 0.02
 param set-default EKF2_GPS_POS_X 0.055
 param set-default EKF2_GPS_POS_Z -0.15
-param set-default EKF2_HGT_MODE 0
 param set-default EKF2_MIN_RNG 0.03
 param set-default EKF2_OF_POS_X 0.055
 param set-default EKF2_OF_POS_Y 0.02
@@ -41,7 +40,6 @@ param set-default EKF2_OF_POS_Z 0.065
 param set-default EKF2_REQ_HDRIFT 0.3
 param set-default EKF2_REQ_SACC 1
 param set-default EKF2_REQ_VDRIFT 0.3
-param set-default EKF2_RNG_AID 1
 param set-default EKF2_RNG_A_HMAX 8
 param set-default EKF2_RNG_A_VMAX 2
 param set-default EKF2_RNG_POS_X 0.055
@@ -66,15 +64,8 @@ param set-default MC_ACRO_R_MAX 200
 param set-default MC_ACRO_SUPEXPO 0
 param set-default MC_ACRO_SUPEXPOY 0
 param set-default MC_ACRO_Y_MAX 150
-param set-default IMU_DGYRO_CUTOFF 30
 param set-default MC_PITCHRATE_D 0.0015
-param set-default MC_PITCHRATE_I 0.2
-param set-default MC_PITCHRATE_K 1
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_ROLLRATE_D 0.0015
-param set-default MC_ROLLRATE_I 0.2
-param set-default MC_ROLLRATE_K 1
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_YAWRATE_P 0.3
 
 # Position Control Tuning
@@ -86,7 +77,6 @@ param set-default MPC_MANTHR_MIN 0
 param set-default MPC_MAN_Y_MAX 120
 param set-default MPC_TILTMAX_AIR 45
 param set-default MPC_THR_HOVER 0.3
-param set-default MPC_THR_MIN 0.12
 param set-default MPC_TKO_SPEED 1
 param set-default MPC_VEL_MANUAL 5
 param set-default MPC_XY_CRUISE 5
@@ -102,23 +92,17 @@ param set-default MPC_LAND_ALT2 1
 # Navigator Parameters
 param set-default NAV_ACC_RAD 2
 
-# PWM and RC Parameters
-param set-default PWM_MAIN_MAX 1950
-param set-default PWM_MAIN_MIN 1075
-
 # use oneshot motor output protocol
 param set-default PWM_MAIN_RATE 0
 
 # RTL Parameters
 param set-default RTL_DESCEND_ALT 5
 param set-default RTL_RETURN_ALT 5
-param set-default RTL_CONE_ANG 45
 
 # Logging Parameters
 param set-default SDLOG_PROFILE 131
 
 # Sensors Parameters
-param set-default SENS_BOARD_ROT 0
 param set-default SENS_CM8JL65_CFG 104
 param set-default SENS_FLOW_MAXHGT 25
 param set-default SENS_FLOW_MINHGT 0.5

ROMFS/px4fmu_common/init.d/airframes/4017_nxp_hovergames

@@ -21,13 +21,10 @@
 set MIXER quad_x
 set PWM_OUT 1234
 
-param set-default IMU_GYRO_CUTOFF 40
 param set-default IMU_DGYRO_CUTOFF 20
 
 param set-default MC_ROLLRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
-param set-default MC_ROLLRATE_D 0.003
 
 param set-default MC_PITCHRATE_P 0.18
 param set-default MC_PITCHRATE_I 0.15
-param set-default MC_PITCHRATE_D 0.003