mavlink: return unsupported frame result when that's the case

Signed-off-by: Julian Oes <julian@oes.ch>

.ackrc

@@ -1 +0,0 @@
---ignore-dir=Documentation

.ci/Jenkinsfile-compile

@@ -40,16 +40,18 @@ pipeline {
                      "ark_can-flow_default",
                      "ark_can-gps_canbootloader",
                      "ark_can-gps_default",
-                     "ark_cannode_canbootloader",
-                     "ark_cannode_default",
                      "ark_can-rtk-gps_canbootloader",
                      "ark_can-rtk-gps_default",
+                     "ark_cannode_canbootloader",
+                     "ark_cannode_default",
                      "ark_fmu-v6x_bootloader",
                      "ark_fmu-v6x_default",
+                     "ark_pi6x_bootloader",
+                     "ark_pi6x_default"
                      "atl_mantis-edu_default",
                      "av_x-v1_default",
-                     "bitcraze_crazyflie_default",
                      "bitcraze_crazyflie21_default",
+                     "bitcraze_crazyflie_default",
                      "cuav_can-gps-v1_canbootloader",
                      "cuav_can-gps-v1_default",
                      "cuav_nora_default",
@@ -66,8 +68,8 @@ pipeline {
                      "holybro_durandal-v1_default",
                      "holybro_kakutef7_default",
                      "holybro_kakuteh7_default",
-                     "holybro_kakuteh7v2_default",
                      "holybro_kakuteh7mini_default",
+                     "holybro_kakuteh7v2_default",
                      "holybro_pix32v5_default",
                      "matek_gnss-m9n-f4_canbootloader",
                      "matek_gnss-m9n-f4_default",
@@ -77,8 +79,8 @@ pipeline {
                      "modalai_fc-v1_default",
                      "modalai_fc-v2_default",
                      "mro_ctrl-zero-classic_default",
-                     "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
+                     "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-h7-oem_default",
                      "mro_ctrl-zero-h7_default",
                      "mro_pixracerpro_default",
@@ -104,22 +106,28 @@ pipeline {
                      "px4_fmu-v5_debug",
                      "px4_fmu-v5_default",
                      "px4_fmu-v5_lto",
+                     "px4_fmu-v5_rover",
                      "px4_fmu-v5_stackcheck",
                      "px4_fmu-v5_uavcanv0periph",
                      "px4_fmu-v5x_default",
+                     "px4_fmu-v5x_rover",
                      "px4_fmu-v6c_default",
+                     "px4_fmu-v6c_rover",
                      "px4_fmu-v6u_default",
+                     "px4_fmu-v6u_rover",
                      "px4_fmu-v6x_default",
+                     "px4_fmu-v6x_rover",
                      "px4_fmu-v6xrt_bootloader",
                      "px4_fmu-v6xrt_default",
+                     "px4_fmu-v6xrt_rover",
                      "px4_io-v2_default",
                      "raspberrypi_pico_default",
+                     "siyi_n7_default",
                      "sky-drones_smartap-airlink_default",
                      "spracing_h7extreme_default",
                      "thepeach_k1_default",
                      "thepeach_r1_default",
                      "uvify_core_default",
-                     "siyi_n7_default"
             ],
             image: docker_images.nuttx,
             archive: true

.devcontainer/devcontainer.json

@@ -15,6 +15,7 @@
 	"extensions": [
 		"chiehyu.vscode-astyle",
 		"dan-c-underwood.arm",
+		"editorconfig.editorconfig",
 		"fredericbonnet.cmake-test-adapter",
 		"github.vscode-pull-request-github",
 		"marus25.cortex-debug",

.editorconfig

@@ -0,0 +1,14 @@
+root = true
+
+[*]
+insert_final_newline = false
+
+[{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
+indent_style = tab
+tab_width = 8
+# Not in the official standard, but supported by many editors
+max_line_length = 120
+
+[*.yaml]
+indent_style = space
+indent_size = 2

.github/workflows/compile_nuttx.yml

@@ -25,6 +25,8 @@ jobs:
           ark_can-rtk-gps,
           ark_cannode,
           ark_fmu-v6x,
+          ark_pi6x,
+          ark_septentrio-gps,
           atl_mantis-edu,
           av_x-v1,
           bitcraze_crazyflie,
@@ -48,6 +50,7 @@ jobs:
           matek_h743-slim,
           modalai_fc-v1,
           modalai_fc-v2,
+          mro_ctrl-zero-classic,
           mro_ctrl-zero-f7,
           mro_ctrl-zero-f7-oem,
           mro_ctrl-zero-h7,

.github_changelog_generator

@@ -1,33 +0,0 @@
-# How to install:
-#   gem install github_changelog_generator
-# How to run:
-#   github_changelog_generator -u PX4 -p Firmware
-# Description:
-#   The following params are sensible defaults for the PX4 project,
-#   if you want to do a changelog before a release you need to update since-tag and future-releases,
-
-# Params:
-#   github_changelog_generator --help for all options
-
-# max-issues
-#   max threshold for github api queries
-#   make sure you set your CHANGELOG_GITHUB_TOKEN before
-#   running
-max-issues=1500
-
-# exclude-tags-regex
-#   excludes release candidates
-exclude-tags-regex=rc[0-9]{1,}|beta[0-9]{1,}
-
-# since-tag
-#   version of last stable release
-#   you need to change this depending on what you need
-#   if you want a changelog between versions this is the lowest version
-since-tag=1.6.5
-
-# future-release
-#   version you are about to release
-#   if you want a changelog between a version and all unreleased changes grouped as a release
-#     eg: v1.6.5 to v1.7.0
-future-release=v1.7.0
-

.gitmodules

@@ -79,3 +79,7 @@
 [submodule "Tools/simulation/gz"]
 	path = Tools/simulation/gz
 	url = https://github.com/PX4/PX4-gazebo-models.git
+	branch = main
+[submodule "boards/modalai/voxl2/libfc-sensor-api"]
+	path = boards/modalai/voxl2/libfc-sensor-api
+	url = https://gitlab.com/voxl-public/voxl-sdk/core-libs/libfc-sensor-api.git

.travis.yml

@@ -1,35 +0,0 @@
-language: cpp
-
-git:
-  depth: 100
-  submodules: false
-
-matrix:
-  fast_finish: true
-  include:
-    - os: linux
-      dist: xenial
-      # In order to stay under the coverity rate limit, we only run this weekly
-      # and not on push which is configured in travis-ci settings.
-      if: branch = main
-
-before_install:
-    - echo -n | openssl s_client -connect scan.coverity.com:443 | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' | sudo tee -a /etc/ssl/certs/ca-
-
-install:
-    - export PATH=$HOME/.local/bin:$PATH
-    - pip install --user --upgrade pip
-    - pip install --user -r Tools/setup/requirements.txt
-
-script:
-    - make
-
-addons:
-  coverity_scan:
-    project:
-      name: "PX4/Firmware"
-      description: "Build submitted via Travis CI"
-    notification_email: ci@px4.io
-    build_command_prepend: "make distclean"
-    build_command: "make px4_sitl_default"
-    branch_pattern: coverity_scan

.vscode/cmake-variants.yaml

@@ -71,6 +71,26 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: px4_fmu-v5x_default
+    px4_fmu-v6c_default:
+      short: px4_fmu-v6c
+      buildType: MinSizeRel
+      settings:
+        CONFIG: px4_fmu-v6c_default
+    px4_fmu-v6c_bootloader:
+      short: px4_fmu-v6c_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: px4_fmu-v6c_bootloader
+    px4_fmu-v6u_default:
+      short: px4_fmu-v6u
+      buildType: MinSizeRel
+      settings:
+        CONFIG: px4_fmu-v6u_default
+    px4_fmu-v6u_bootloader:
+      short: px4_fmu-v6u_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: px4_fmu-v6u_bootloader
     px4_fmu-v6x_default:
       short: px4_fmu-v6x
       buildType: MinSizeRel
@@ -131,6 +151,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-rtk-gps_canbootloader
+    ark_septentrio_gps_default:
+      short: ark_septentrio_gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_septentrio_gps_default
+    ark_septentrio_gps_canbootloader:
+      short: ark_septentrio_gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_septentrio_gps_canbootloader
     ark_cannode_default:
       short: ark_cannode_default
       buildType: MinSizeRel
@@ -151,6 +181,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_fmu-v6x_default
+    ark_pi6x_bootloader:
+      short: ark_pi6x_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_pi6x_bootloader
+    ark_pi6x_default:
+      short: ark_pi6x_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_pi6x_default
     atl_mantis-edu_default:
       short: atl_mantis-edu
       buildType: MinSizeRel

.vscode/extensions.json

@@ -4,6 +4,7 @@
     "recommendations": [
         "chiehyu.vscode-astyle",
         "dan-c-underwood.arm",
+        "editorconfig.editorconfig",
         "fredericbonnet.cmake-test-adapter",
         "github.vscode-pull-request-github",
         "marus25.cortex-debug",

.ycm_extra_conf.py

@@ -1,172 +0,0 @@
-# This file is NOT licensed under the GPLv3, which is the license for the rest
-# of YouCompleteMe.
-#
-# Here's the license text for this file:
-#
-# This is free and unencumbered software released into the public domain.
-#
-# Anyone is free to copy, modify, publish, use, compile, sell, or
-# distribute this software, either in source code form or as a compiled
-# binary, for any purpose, commercial or non-commercial, and by any
-# means.
-#
-# In jurisdictions that recognize copyright laws, the author or authors
-# of this software dedicate any and all copyright interest in the
-# software to the public domain. We make this dedication for the benefit
-# of the public at large and to the detriment of our heirs and
-# successors. We intend this dedication to be an overt act of
-# relinquishment in perpetuity of all present and future rights to this
-# software under copyright law.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-# IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR
-# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-# OTHER DEALINGS IN THE SOFTWARE.
-#
-# For more information, please refer to <http://unlicense.org/>
-
-import os
-import ycm_core
-
-# These are the compilation flags that will be used in case there's no
-# compilation database set (by default, one is not set).
-# CHANGE THIS LIST OF FLAGS. YES, THIS IS THE DROID YOU HAVE BEEN LOOKING FOR.
-flags = [
-'-Wall',
-'-Wextra',
-'-Werror',
-#'-Wc++98-compat',
-'-Wno-long-long',
-'-Wno-variadic-macros',
-'-fexceptions',
-'-DNDEBUG',
-# You 100% do NOT need -DUSE_CLANG_COMPLETER in your flags; only the YCM
-# source code needs it.
-#'-DUSE_CLANG_COMPLETER',
-# THIS IS IMPORTANT! Without a "-std=<something>" flag, clang won't know which
-# language to use when compiling headers. So it will guess. Badly. So C++
-# headers will be compiled as C headers. You don't want that so ALWAYS specify
-# a "-std=<something>".
-# For a C project, you would set this to something like 'c99' instead of
-# 'c++14'.
-'-std=c++14',
-# ...and the same thing goes for the magic -x option which specifies the
-# language that the files to be compiled are written in. This is mostly
-# relevant for c++ headers.
-# For a C project, you would set this to 'c' instead of 'c++'.
-'-x',
-'c++',
-'-undef', # get rid of standard definitions to allow us to include arm math header
-'-I', os.path.join(os.path.expanduser("~"),'gcc-arm-none-eabi-4_7-2013q3/arm-none-eabi/include'),
-'-I', 'Build/px4_io-v2_default.build/nuttx-export/include/',
-'-I', './NuttX/nuttx/arch/arm/include',
-'-include', './src/include/visibility.h',
-'-I', './src',
-'-I', './src/modules',
-'-I', './src/include',
-'-I', './src/lib',
-'-I', './NuttX',
-]
-
-
-# Set this to the absolute path to the folder (NOT the file!) containing the
-# compile_commands.json file to use that instead of 'flags'. See here for
-# more details: http://clang.llvm.org/docs/JSONCompilationDatabase.html
-#
-# Most projects will NOT need to set this to anything; you can just change the
-# 'flags' list of compilation flags. Notice that YCM itself uses that approach.
-compilation_database_folder = ''
-
-if os.path.exists( compilation_database_folder ):
-  database = ycm_core.CompilationDatabase( compilation_database_folder )
-else:
-  database = None
-
-SOURCE_EXTENSIONS = [ '.cpp', '.cxx', '.cc', '.c', '.m', '.mm' ]
-
-def DirectoryOfThisScript():
-  return os.path.dirname( os.path.abspath( __file__ ) )
-
-
-def MakeRelativePathsInFlagsAbsolute( flags, working_directory ):
-  if not working_directory:
-    return list( flags )
-  new_flags = []
-  make_next_absolute = False
-  path_flags = [ '-isystem', '-I', '-iquote', '--sysroot=' ]
-  for flag in flags:
-    new_flag = flag
-
-    if make_next_absolute:
-      make_next_absolute = False
-      if not flag.startswith( '/' ):
-        new_flag = os.path.join( working_directory, flag )
-
-    for path_flag in path_flags:
-      if flag == path_flag:
-        make_next_absolute = True
-        break
-
-      if flag.startswith( path_flag ):
-        path = flag[ len( path_flag ): ]
-        new_flag = path_flag + os.path.join( working_directory, path )
-        break
-
-    if new_flag:
-      new_flags.append( new_flag )
-  return new_flags
-
-
-def IsHeaderFile( filename ):
-  extension = os.path.splitext( filename )[ 1 ]
-  return extension in [ '.h', '.hxx', '.hpp', '.hh' ]
-
-
-def GetCompilationInfoForFile( filename ):
-  # The compilation_commands.json file generated by CMake does not have entries
-  # for header files. So we do our best by asking the db for flags for a
-  # corresponding source file, if any. If one exists, the flags for that file
-  # should be good enough.
-  if IsHeaderFile( filename ):
-    basename = os.path.splitext( filename )[ 0 ]
-    for extension in SOURCE_EXTENSIONS:
-      replacement_file = basename + extension
-      if os.path.exists( replacement_file ):
-        compilation_info = database.GetCompilationInfoForFile(
-          replacement_file )
-        if compilation_info.compiler_flags_:
-          return compilation_info
-    return None
-  return database.GetCompilationInfoForFile( filename )
-
-
-def FlagsForFile( filename, **kwargs ):
-  if database:
-    # Bear in mind that compilation_info.compiler_flags_ does NOT return a
-    # python list, but a "list-like" StringVec object
-    compilation_info = GetCompilationInfoForFile( filename )
-    if not compilation_info:
-      return None
-
-    final_flags = MakeRelativePathsInFlagsAbsolute(
-      compilation_info.compiler_flags_,
-      compilation_info.compiler_working_dir_ )
-
-    # NOTE: This is just for YouCompleteMe; it's highly likely that your project
-    # does NOT need to remove the stdlib flag. DO NOT USE THIS IN YOUR
-    # ycm_extra_conf IF YOU'RE NOT 100% SURE YOU NEED IT.
-    #try:
-    #  final_flags.remove( '-stdlib=libc++' )
-    #except ValueError:
-    #  pass
-  else:
-    relative_to = DirectoryOfThisScript()
-    final_flags = MakeRelativePathsInFlagsAbsolute( flags, relative_to )
-
-  return {
-    'flags': final_flags,
-    'do_cache': True
-  }

CMakeLists.txt

@@ -485,7 +485,7 @@ include(package)
 
 # install python requirements using configured python
 add_custom_target(install_python_requirements
-	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
+	COMMAND ${PYTHON_EXECUTABLE} -m pip install --break-system-packages --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )

Firmware.sublime-project

@@ -1,83 +0,0 @@
-{
-	"folders":
-	[
-		{
-			"path": ".",
-			"file_exclude_patterns":
-			[
-				"*.o",
-				"*.a",
-				"*.d",
-				".built",
-				".context",
-				".depend",
-				".config",
-				".version",
-				"Make.dep",
-				".configured",
-				"*.sublime-project",
-				"*.sublime-workspace",
-				".project",
-				".cproject",
-				"cscope.out"
-			],
-			"folder_exclude_patterns":
-			[
-				".settings",
-				"nuttx/arch/arm/src/board",
-				"nuttx/arch/arm/src/chip",
-				"build_*"
-			]
-		}
-	],
-	"settings":
-	{
-		"tab_size": 8,
-		"translate_tabs_to_spaces": false,
-		"highlight_line": true,
-		"AStyleFormatter":
-		{
-			"options_c":
-			{
-				"use_only_additional_options": true,
-				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
-			},
-			"options_c++":
-			{
-				"use_only_additional_options": true,
-				"additional_options_file": "${project_path}/Tools/astyle/astylerc"
-			}
-		}
-	},
-	"build_systems":
-	[
-		{
-			"name": "PX4: make all",
-			"working_dir": "${project_path}",
-			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
-			"cmd": ["make"],
-			"shell": true
-		},
-		{
-			"name": "PX4: make and upload",
-			"working_dir": "${project_path}",
-			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
-			"cmd": ["make upload px4_fmu-v2_default -j8"],
-			"shell": true
-		},
-		{
-			"name": "PX4: make posix",
-			"working_dir": "${project_path}",
-			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
-			"cmd": ["make posix"],
-			"shell": true
-		},
-		{
-			"name": "MindPX_V2: make and upload",
-			"working_dir": "${project_path}",
-			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
-			"cmd": ["make upload mindpx-v2_default -j8"],
-			"shell": true
-		}
-	]
-}

Jenkinsfile

@@ -171,9 +171,9 @@ pipeline {
               sh('cp airframes.md PX4-user_guide/en/airframes/airframe_reference.md')
               sh('cp parameters.md PX4-user_guide/en/advanced_config/parameter_reference.md')
               sh('cp -R modules/*.md PX4-user_guide/en/modules/')
-              sh('cp -R graph_*.json PX4-user_guide/.vuepress/public/en/middleware/')
+              sh('cp -R graph_*.json PX4-user_guide/public/middleware/')  // vitepress
               sh('cp -R msg_docs/*.md PX4-user_guide/en/msg_docs/')
-              sh('cp -R failsafe_sim/* PX4-user_guide/.vuepress/public/en/config/failsafe')
+              sh('cp -R failsafe_sim/* PX4-user_guide/public/config/failsafe')  // vitepress
               sh('cd PX4-user_guide; git status; git add .; git commit -a -m "Update PX4 Firmware metadata `date`" || true')
               sh('cd PX4-user_guide; git push origin main || true')
               sh('rm -rf PX4-user_guide')

ROMFS/px4fmu_common/init.d-posix/airframes/10040_sihsim_quadx

@@ -22,18 +22,17 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -26,7 +26,7 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default BAT_N_CELLS 3
 
-param set-default SIH_T_MAX 6.0
+param set-default SIH_T_MAX 6
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
 param set-default SIH_IYY 0.0144
@@ -45,9 +45,9 @@ param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS1_TRQ_P 1.0
+param set-default CA_SV_CS1_TRQ_P 1
 param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
+param set-default CA_SV_CS2_TRQ_Y 1
 param set-default CA_SV_CS2_TYPE 4
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 202

ROMFS/px4fmu_common/init.d-posix/airframes/10042_sihsim_xvert

@@ -35,14 +35,14 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default BAT_N_CELLS 3
 
-param set-default SIH_T_MAX 2.0
+param set-default SIH_T_MAX 2
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2
 # IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
 param set-default SIH_IXX 0.00354
 param set-default SIH_IYY 0.000625
 param set-default SIH_IZZ 0.00300
-param set-default SIH_IXZ 0.0
+param set-default SIH_IXZ 0
 param set-default SIH_KDV 0.2
 param set-default SIH_L_ROLL 0.145
 

ROMFS/px4fmu_common/init.d-posix/airframes/1010_gazebo-classic_iris_opt_flow

@@ -47,5 +47,5 @@ param set-default MPC_ALT_MODE 2
 
 param set-default SENS_FLOW_ROT 6
 param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXHGT 3
 param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1021_gazebo-classic_uuv_hippocampus

@@ -8,34 +8,34 @@
 param set-default CA_AIRFRAME 7
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AY 0.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PX 0.0000
-param set-default CA_ROTOR0_PY -0.3000
-param set-default CA_ROTOR0_PZ -0.3000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AY 0.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PX 0.0000
-param set-default CA_ROTOR1_PY 0.3000
-param set-default CA_ROTOR1_PZ -0.3000
-param set-default CA_ROTOR2_AX 1.0000
-param set-default CA_ROTOR2_AY 0.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX 0.0000
-param set-default CA_ROTOR2_PY 0.3000
-param set-default CA_ROTOR2_PZ 0.3000
-param set-default CA_ROTOR3_AX 1.0000
-param set-default CA_ROTOR3_AY 0.0000
-param set-default CA_ROTOR3_AZ 0.0000
-param set-default CA_ROTOR3_KM 0.0000
-param set-default CA_ROTOR3_PX 0.0000
-param set-default CA_ROTOR3_PY -0.3000
-param set-default CA_ROTOR3_PZ 0.3000
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AY 0
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PY -0.3
+param set-default CA_ROTOR0_PZ -0.3
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AY 0
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY 0.3
+param set-default CA_ROTOR1_PZ -0.3
+param set-default CA_ROTOR2_AX 1
+param set-default CA_ROTOR2_AY 0
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX 0
+param set-default CA_ROTOR2_PY 0.3
+param set-default CA_ROTOR2_PZ 0.3
+param set-default CA_ROTOR3_AX 1
+param set-default CA_ROTOR3_AY 0
+param set-default CA_ROTOR3_AZ 0
+param set-default CA_ROTOR3_KM 0
+param set-default CA_ROTOR3_PX 0
+param set-default CA_ROTOR3_PY -0.3
+param set-default CA_ROTOR3_PZ 0.3
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d-posix/airframes/1022_gazebo-classic_uuv_bluerov2_heavy

@@ -9,49 +9,49 @@ param set-default CA_AIRFRAME 7
 
 param set-default CA_ROTOR_COUNT 8
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AY -1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PX 0.5000
-param set-default CA_ROTOR0_PY 0.3000
-param set-default CA_ROTOR0_PZ 0.2000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AY 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PX 0.5000
-param set-default CA_ROTOR1_PY -0.3000
-param set-default CA_ROTOR1_PZ 0.2000
-param set-default CA_ROTOR2_AX 1.0000
-param set-default CA_ROTOR2_AY 1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -0.5000
-param set-default CA_ROTOR2_PY 0.3000
-param set-default CA_ROTOR2_PZ 0.2000
-param set-default CA_ROTOR3_AX 1.0000
-param set-default CA_ROTOR3_AY -1.0000
-param set-default CA_ROTOR3_AZ 0.0000
-param set-default CA_ROTOR3_KM 0.0000
-param set-default CA_ROTOR3_PX -0.5000
-param set-default CA_ROTOR3_PY -0.3000
-param set-default CA_ROTOR3_PZ 0.2000
-param set-default CA_ROTOR4_AZ -1.0000
-param set-default CA_ROTOR4_KM 0.0000
-param set-default CA_ROTOR4_PX 0.5000
-param set-default CA_ROTOR4_PY 0.5000
-param set-default CA_ROTOR5_AZ 1.0000
-param set-default CA_ROTOR5_KM 0.0000
-param set-default CA_ROTOR5_PX 0.5000
-param set-default CA_ROTOR5_PY -0.5000
-param set-default CA_ROTOR6_AZ 1.0000
-param set-default CA_ROTOR6_KM 0.0000
-param set-default CA_ROTOR6_PX -0.5000
-param set-default CA_ROTOR6_PY 0.5000
-param set-default CA_ROTOR7_KM 0.0000
-param set-default CA_ROTOR7_PX -0.5000
-param set-default CA_ROTOR7_PY -0.5000
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AY -1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX 0.5
+param set-default CA_ROTOR0_PY 0.3
+param set-default CA_ROTOR0_PZ 0.2
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AY 1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX 0.5
+param set-default CA_ROTOR1_PY -0.3
+param set-default CA_ROTOR1_PZ 0.2
+param set-default CA_ROTOR2_AX 1
+param set-default CA_ROTOR2_AY 1
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX -0.5
+param set-default CA_ROTOR2_PY 0.3
+param set-default CA_ROTOR2_PZ 0.2
+param set-default CA_ROTOR3_AX 1
+param set-default CA_ROTOR3_AY -1
+param set-default CA_ROTOR3_AZ 0
+param set-default CA_ROTOR3_KM 0
+param set-default CA_ROTOR3_PX -0.5
+param set-default CA_ROTOR3_PY -0.3
+param set-default CA_ROTOR3_PZ 0.2
+param set-default CA_ROTOR4_AZ -1
+param set-default CA_ROTOR4_KM 0
+param set-default CA_ROTOR4_PX 0.5
+param set-default CA_ROTOR4_PY 0.5
+param set-default CA_ROTOR5_AZ 1
+param set-default CA_ROTOR5_KM 0
+param set-default CA_ROTOR5_PX 0.5
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR6_AZ 1
+param set-default CA_ROTOR6_KM 0
+param set-default CA_ROTOR6_PX -0.5
+param set-default CA_ROTOR6_PY 0.5
+param set-default CA_ROTOR7_KM 0
+param set-default CA_ROTOR7_PX -0.5
+param set-default CA_ROTOR7_PY -0.5
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d-posix/airframes/1030_gazebo-classic_plane

@@ -54,9 +54,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam

@@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo-classic_plane_catapult

@@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal

@@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1035_gazebo-classic_techpod

@@ -40,9 +40,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo

@@ -42,9 +42,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1037_gazebo-classic_believer

@@ -48,9 +48,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo-classic_glider

@@ -55,9 +55,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -47,9 +47,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1039_gazebo-classic_advanced_plane

@@ -45,9 +45,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1040_gazebo-classic_standard_vtol

@@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
@@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103

ROMFS/px4fmu_common/init.d-posix/airframes/1041_gazebo-classic_tailsitter

@@ -50,11 +50,11 @@ param set-default SENS_IMU_MODE 1
 
 param set-default FW_P_TC 0.6
 
-param set-default FW_PR_FF 0.1
+param set-default FW_PR_FF 0.0
 param set-default FW_PSP_OFF 2
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_I 0.2
-param set-default FW_RR_P 0.3
+param set-default FW_RR_P 0.5
 param set-default FW_THR_TRIM 0.35
 param set-default FW_THR_MAX 0.8
 param set-default FW_THR_MIN 0.05
@@ -66,8 +66,6 @@ param set-default FW_T_SINK_MIN 1.6
 param set-default MC_AIRMODE 1
 param set-default MC_ROLL_P 3
 param set-default MC_PITCH_P 3
-param set-default MC_ROLLRATE_P 0.3
-param set-default MC_PITCHRATE_P 0.3
 
 param set-default VT_ARSP_TRANS 10
 param set-default VT_B_TRANS_DUR 5

ROMFS/px4fmu_common/init.d-posix/airframes/1042_gazebo-classic_tiltrotor

@@ -31,7 +31,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_TL_COUNT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1043_gazebo-classic_standard_vtol_drop

@@ -27,8 +27,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
@@ -37,7 +37,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103

ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo-classic_plane_lidar

@@ -57,9 +57,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/1060_gazebo-classic_rover

@@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
 
 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2.0
+param set-default GND_WHEEL_BASE 2
 
 param set-default CA_AIRFRAME 5
 

ROMFS/px4fmu_common/init.d-posix/airframes/1062_flightgear_tf-r1

@@ -29,7 +29,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
 
 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 3.0
+param set-default GND_WHEEL_BASE 3
 
 param set-default CA_AIRFRAME 5
 

ROMFS/px4fmu_common/init.d-posix/airframes/1070_gazebo-classic_boat

@@ -22,7 +22,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
 
 param set-default GND_MAX_ANG 0.6
-param set-default GND_WHEEL_BASE 2.0
+param set-default GND_WHEEL_BASE 2
 
 param set-default CA_AIRFRAME 9
 

ROMFS/px4fmu_common/init.d-posix/airframes/17001_flightgear_tf-g1

@@ -14,7 +14,7 @@
 
 param set-default FW_AIRSPD_STALL 8
 
-param set-default FW_P_RMAX_NEG 20.0
+param set-default FW_P_RMAX_NEG 20
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1
 
@@ -37,7 +37,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30
 
-param set-default FW_MAN_R_MAX 30.0
+param set-default FW_MAN_R_MAX 30
 
 param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0

ROMFS/px4fmu_common/init.d-posix/airframes/17002_flightgear_tf-g2

@@ -14,7 +14,7 @@
 
 param set-default FW_AIRSPD_STALL 5
 
-param set-default FW_P_RMAX_NEG 20.0
+param set-default FW_P_RMAX_NEG 20
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1
 
@@ -29,9 +29,9 @@ param set-default NAV_LOITER_RAD 50
 # Parameters related to autogyro takeoff PR
 #param set-default AG_TKOFF 1
 #param set-default AG_PROT_TYPE 1
-#param set-default AG_PROT_MIN_RPM 50.0
-#param set-default AG_PROT_TRG_RPM 900.0
-#param set-defoult AG_ROTOR_RPM 900.0
+#param set-default AG_PROT_MIN_RPM 50
+#param set-default AG_PROT_TRG_RPM 900
+#param set-defoult AG_ROTOR_RPM 900
 
 param set-default FW_ARSP_SCALE_EN 0
 
@@ -42,7 +42,7 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_R_LIM 30
 
-param set-default FW_MAN_R_MAX 30.0
+param set-default FW_MAN_R_MAX 30
 
 param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0

ROMFS/px4fmu_common/init.d-posix/airframes/2507_gazebo-classic_cloudship

@@ -14,21 +14,21 @@
 param set-default CA_AIRFRAME 9
 
 param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PY 2.0000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PY -2.0000
-param set-default CA_ROTOR2_AY -1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -10.0000
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PY 2
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PY -2
+param set-default CA_ROTOR2_AY -1
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX -10
 
 param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1.0000
+param set-default CA_SV_CS0_TRQ_P 1
 
 param set-default CA_R_REV 7
 

ROMFS/px4fmu_common/init.d-posix/airframes/3011_jsbsim_hexarotor_x

@@ -13,9 +13,9 @@ param set-default MAV_TYPE 13
 
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCH_P 6.0
+param set-default MC_PITCH_P 6
 param set-default MC_ROLLRATE_I 0.1
-param set-default MC_ROLL_P 6.0
+param set-default MC_ROLL_P 6
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3
 
@@ -27,11 +27,11 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2
 
 
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 1.0
+param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -1.0
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY -1
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5

ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna

@@ -70,9 +70,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/4004_gz_standard_vtol

@@ -40,8 +40,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default SIM_GZ_EC_FUNC1 101
@@ -73,7 +73,7 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 
 param set-default NPFG_PERIOD 12
 param set-default FW_PR_FF 0.2

ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision

@@ -105,31 +105,19 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default THR_MDL_FAC 0.3
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
-# Outputs
-# param set-default PWM_AUX_FUNC1 101
-# param set-default PWM_AUX_FUNC2 102
-# param set-default PWM_AUX_FUNC3 103
-# param set-default PWM_AUX_FUNC4 104
-
-# param set-default PWM_MAIN_FUNC1 101
-# param set-default PWM_MAIN_FUNC2 102
-# param set-default PWM_MAIN_FUNC3 103
-# param set-default PWM_MAIN_FUNC4 104
-
 param set-default SIM_GZ_EC_FUNC1 101
 param set-default SIM_GZ_EC_FUNC2 102
 param set-default SIM_GZ_EC_FUNC3 103
@@ -144,5 +132,3 @@ param set-default SIM_GZ_EC_MAX1 1100
 param set-default SIM_GZ_EC_MAX2 1100
 param set-default SIM_GZ_EC_MAX3 1100
 param set-default SIM_GZ_EC_MAX4 1100
-
-

ROMFS/px4fmu_common/init.d-posix/airframes/4008_gz_advanced_plane

@@ -63,9 +63,9 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_CS4_TYPE 9
 param set-default CA_SV_CS5_TYPE 10

ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower

@@ -0,0 +1,80 @@
+#!/bin/sh
+# @name Gazebo lawnmower
+# @type Rover
+# @class Rover
+
+. ${R}etc/init.d/rc.rover_differential_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=lawnmower}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+# Simulated sensors
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 0
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 1
+# We can arm and drive in manual mode when it slides and GPS check fails:
+param set-default COM_ARM_WO_GPS 1
+
+# Set Differential Drive Kinematics Library parameters:
+param set RDD_WHEEL_BASE 0.9
+param set RDD_WHEEL_RADIUS 0.22
+param set RDD_WHEEL_SPEED 10.0	# Maximum wheel speed rad/s, approx 8 km/h
+
+# Actuator mapping - set SITL motors/servos output parameters:
+
+# "Motors" - motor channels 0 (Right) and 1 (Left) - via Wheels GZ bridge:
+param set-default SIM_GZ_WH_FUNC1 101 # right wheel
+#param set-default SIM_GZ_WH_MIN1 0
+#param set-default SIM_GZ_WH_MAX1 200
+#param set-default SIM_GZ_WH_DIS1 100
+#param set-default SIM_GZ_WH_FAIL1 100
+
+param set-default SIM_GZ_WH_FUNC2 102 # left wheel
+#param set-default SIM_GZ_WH_MIN2 0
+#param set-default SIM_GZ_WH_MAX2 200
+#aram set-default SIM_GZ_WH_DIS2 100
+#param set-default SIM_GZ_WH_FAIL2 100
+
+param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
+
+# Note: The servo configurations ( SIM_GZ_SV_FUNC*) outlined below are intended for educational purposes in this simulation. 
+# They do not have physical effects in the simulated environment, except for actuating the joints. Their definitions are meant to demonstrate 
+# how actuators could be mapped and configured in a real-world application, providing a foundation for understanding and implementing actuator 
+# controls in practical scenarios.
+
+# Cutter deck blades clutch, PCA9685 servo channel 3,  "RC FLAPS" (406) - leftmost switch, or "Servo 3" (203):
+param set-default SIM_GZ_SV_FUNC3 203
+param set-default SIM_GZ_SV_MIN3 0
+param set-default SIM_GZ_SV_MAX3 1000
+param set-default SIM_GZ_SV_DIS3 500
+param set-default SIM_GZ_SV_FAIL3 500
+
+# Gas engine throttle, PCA9685 servo channel 4, "RC AUX1" (407) - left knob, or "Servo 4" (204):
+#    - on minimum when disarmed or failed:
+param set-default SIM_GZ_SV_FUNC4 204
+param set-default SIM_GZ_SV_MIN4 0
+param set-default SIM_GZ_SV_MAX4 1000
+param set-default SIM_GZ_SV_DIS4 500
+param set-default SIM_GZ_SV_FAIL4 500
+
+# Controlling PCA9685 servos 5,6,7,8 directly via "Servo 5..8" setting, by publishing actuator_servos.control[]:
+
+# Strobes, PCA9685 servo channel 5, "Servo 5" (205) - flashing indicates Mission mode:
+#param set-default SIM_GZ_SV_FUNC5 205
+#param set-default SIM_GZ_SV_MIN5 1000
+#param set-default SIM_GZ_SV_MAX5 2000
+#param set-default SIM_GZ_SV_DIS5 1000
+#param set-default SIM_GZ_SV_FAIL5 1000
+
+# Horn, PCA9685 servo channel 6, "Servo 6" (206) - for alarms like GPS failure:
+#param set-default SIM_GZ_SV_FUNC6 206
+
+# Spare PCA9685 servo channel 7 on "RC AUX2" (408) - right knob, or "Servo 7" (207):
+#param set-default SIM_GZ_SV_FUNC7 207
+
+# Spare PCA9685 servo channel 8 - "Servo 8" (208):
+#param set-default SIM_GZ_SV_FUNC8 208

ROMFS/px4fmu_common/init.d-posix/airframes/6011_gazebo-classic_typhoon_h480

@@ -9,14 +9,14 @@
 
 param set-default MAV_TYPE 13
 
-param set-default MC_PITCHRATE_P 0.0800
-param set-default MC_PITCHRATE_I 0.0400
-param set-default MC_PITCHRATE_D 0.0010
-param set-default MC_PITCH_P 9.0
-param set-default MC_ROLLRATE_P 0.0800
-param set-default MC_ROLLRATE_I 0.0400
-param set-default MC_ROLLRATE_D 0.0010
-param set-default MC_ROLL_P 9.0
+param set-default MC_PITCHRATE_P 0.08
+param set-default MC_PITCHRATE_I 0.04
+param set-default MC_PITCHRATE_D 0.001
+param set-default MC_PITCH_P 9
+param set-default MC_ROLLRATE_P 0.08
+param set-default MC_ROLLRATE_I 0.04
+param set-default MC_ROLLRATE_D 0.001
+param set-default MC_ROLL_P 9
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3
 
@@ -31,11 +31,11 @@ param set-default MAV_PROTO_VER 2
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 6
 
-param set-default CA_ROTOR0_PX 0.0
-param set-default CA_ROTOR0_PY 1.0
+param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
-param set-default CA_ROTOR1_PY -1.0
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY -1
 param set-default CA_ROTOR1_KM 0.05
 param set-default CA_ROTOR2_PX 0.866025
 param set-default CA_ROTOR2_PY -0.5

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -82,6 +82,7 @@ px4_add_romfs_files(
 	4008_gz_advanced_plane
 	4009_gz_r1_rover
 	4010_gz_x500_mono_cam
+	4011_gz_lawnmower
 
 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -41,19 +41,6 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
 
 	echo "INFO  [init] Gazebo simulator"
 
-	# set local coordinate frame reference
-	if [ -n "${PX4_HOME_LAT}" ]; then
-		param set SIM_GZ_HOME_LAT ${PX4_HOME_LAT}
-	fi
-
-	if [ -n "${PX4_HOME_LON}" ]; then
-		param set SIM_GZ_HOME_LON ${PX4_HOME_LON}
-	fi
-
-	if [ -n "${PX4_HOME_ALT}" ]; then
-		param set SIM_GZ_HOME_ALT ${PX4_HOME_ALT}
-	fi
-
 	# Only start up Gazebo if PX4_GZ_STANDALONE is not set.
 	if [ -z "${PX4_GZ_STANDALONE}" ]; then
 
@@ -64,6 +51,13 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
 			# "gz sim" from Garden on
 			gz_command="gz"
 			gz_sub_command="sim"
+
+			# Specify render engine if `GZ_SIM_RENDER_ENGINE` is set
+			# (for example, if you want to use Ogre 1.x instead of Ogre 2.x):
+			if [ -n "${PX4_GZ_SIM_RENDER_ENGINE}" ]; then
+				echo "INFO  [init] Setting Gazebo render engine to '${PX4_GZ_SIM_RENDER_ENGINE}'!"
+				gz_sub_command="${gz_sub_command} --render-engine ${PX4_GZ_SIM_RENDER_ENGINE}"
+			fi
 		else
 			echo "ERROR [init] Gazebo gz please install gz-garden"
 			exit 1
@@ -173,6 +167,12 @@ elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)"
 
 else
 	# otherwise start simulator (mavlink) module
+
+	# EKF2 specifics
+	param set-default EKF2_GPS_DELAY 10
+	param set-default EKF2_MULTI_IMU 3
+	param set-default SENS_IMU_MODE 0
+
 	simulator_tcp_port=$((4560+px4_instance))
 
 	# Check if PX4_SIM_HOSTNAME environment variable is empty

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -164,10 +164,6 @@ param set-default COM_RC_IN_MODE 1
 # Speedup SITL startup
 param set-default EKF2_REQ_GPS_H 0.5
 
-# Multi-EKF
-param set-default EKF2_MULTI_IMU 3
-param set-default SENS_IMU_MODE 0
-
 param set-default IMU_GYRO_FFT_EN 1
 param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets
 
@@ -186,10 +182,6 @@ param set-default SYS_FAILURE_EN 1
 # does not go below 50% by default, but failure injection can trigger failsafes.
 param set-default COM_LOW_BAT_ACT 2
 
-# Allow to override SYS_MC_EST_GROUP via env
-if [ -n "$SYS_MC_EST_GROUP" ]; then
-	param set SYS_MC_EST_GROUP $SYS_MC_EST_GROUP
-fi
 
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
@@ -248,13 +240,35 @@ then
 fi
 
 load_mon start
-battery_simulator start
+
+if param compare SIM_BAT_ENABLE 1
+then
+	battery_simulator start
+fi
+
 tone_alarm start
 rc_update start
 manual_control start
 sensors start
 commander start
 
+#
+# state estimator selection
+if param compare -s EKF2_EN 1
+then
+	ekf2 start &
+fi
+
+if param compare -s LPE_EN 1
+then
+	local_position_estimator start
+fi
+
+if param compare -s ATT_EN 1
+then
+	attitude_estimator_q start
+fi
+
 if ! pwm_out_sim start -m sim
 then
 	tune_control play error
@@ -329,7 +343,7 @@ fi
 [ -e "$autostart_file".post ] && . "$autostart_file".post
 
 # Run script to start logging
-if param compare SYS_MC_EST_GROUP 2
+if param compare -s EKF2_EN 1
 then
 	set LOGGER_ARGS "-p ekf2_timestamps"
 else

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -34,28 +34,79 @@
 add_subdirectory(airframes)
 
 px4_add_romfs_files(
-	rc.airship_apps
-	rc.airship_defaults
+
 	rc.autostart_ext
-	rc.balloon_apps
-	rc.balloon_defaults
-	rc.boat_defaults
-	rc.fw_apps
-	rc.fw_defaults
-	rc.heli_defaults
-	rc.logging
-	rc.mc_apps
-	rc.mc_defaults
+
 	rcS
 	rc.sensors
-	rc.thermal_cal
-	rc.rover_apps
-	rc.rover_defaults
-	rc.rover_differential_apps
-	rc.rover_differential_defaults
-	rc.uuv_apps
-	rc.uuv_defaults
 	rc.vehicle_setup
-	rc.vtol_apps
-	rc.vtol_defaults
+
+	# TODO
+	rc.balloon_apps
+	rc.balloon_defaults
 )
+
+if(CONFIG_MODULES_AIRSHIP_ATT_CONTROL)
+	px4_add_romfs_files(
+		rc.airship_apps
+		rc.airship_defaults
+	)
+endif()
+
+if(CONFIG_MODULES_FW_RATE_CONTROL)
+	px4_add_romfs_files(
+		rc.fw_apps
+		rc.fw_defaults
+	)
+endif()
+
+if(CONFIG_MODULES_MC_RATE_CONTROL)
+	px4_add_romfs_files(
+		rc.heli_defaults
+		rc.mc_apps
+		rc.mc_defaults
+	)
+endif()
+
+if(CONFIG_MODULES_ROVER_POS_CONTROL)
+	px4_add_romfs_files(
+		rc.rover_apps
+		rc.rover_defaults
+
+		rc.boat_defaults # hack
+	)
+endif()
+
+if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
+	px4_add_romfs_files(
+		rc.rover_differential_apps
+		rc.rover_differential_defaults
+	)
+endif()
+
+if(CONFIG_MODULES_UUV_ATT_CONTROL)
+	px4_add_romfs_files(
+		rc.uuv_apps
+		rc.uuv_defaults
+	)
+endif()
+
+if(CONFIG_MODULES_VTOL_ATT_CONTROL)
+	px4_add_romfs_files(
+		rc.vtol_apps
+		rc.vtol_defaults
+	)
+endif()
+
+
+if(CONFIG_MODULES_LOGGER)
+	px4_add_romfs_files(
+		rc.logging
+	)
+endif()
+
+if(CONFIG_MODULES_TEMPERATURE_COMPENSATION)
+	px4_add_romfs_files(
+		rc.thermal_cal
+	)
+endif()

ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil

@@ -11,30 +11,30 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-
 param set SYS_HITL 1
 
 param set UAVCAN_ENABLE 0
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # disable some checks to allow to fly
 # - without real battery
 param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027
+
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -14,7 +14,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-
 param set-default BAT1_N_CELLS 3
 
 param set-default COM_RC_IN_MODE 1
@@ -55,26 +54,29 @@ param set-default VT_TYPE 2
 
 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
 param set-default CA_ROTOR4_PX 0.2
 
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
 
 param set-default HIL_ACT_FUNC1 101
@@ -98,5 +100,3 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default CBRK_IO_SAFETY 22027
 
 param set-default MAV_TYPE 22
-
-

ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil

@@ -12,26 +12,8 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-
 param set UAVCAN_ENABLE 0
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2
 
@@ -42,3 +24,21 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default CBRK_IO_SAFETY 22027
 
 param set SIH_VEHICLE_TYPE 0
+
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -21,9 +21,9 @@ param set-default CA_ROTOR0_PX 0.3
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TRQ_R 0.5
 param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
+param set-default CA_SV_CS1_TRQ_P 1
 param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
+param set-default CA_SV_CS2_TRQ_Y 1
 param set-default CA_SV_CS2_TYPE 4
 param set-default CA_SV_CS3_TYPE 10
 
@@ -46,7 +46,7 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default BAT_N_CELLS 3
 
-param set SIH_T_MAX 6.0
+param set SIH_T_MAX 6
 param set SIH_MASS 0.3
 param set SIH_IXX 0.00402
 param set SIH_IYY 0.0144

ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil

@@ -71,7 +71,7 @@ param set SIH_MASS 0.2
 param set SIH_IXX 0.00354
 param set SIH_IYY 0.000625
 param set SIH_IZZ 0.00300
-param set SIH_IXZ 0.0
+param set SIH_IXZ 0
 param set SIH_KDV 0.2
 param set SIH_L_ROLL 0.145
 

ROMFS/px4fmu_common/init.d/airframes/13000_generic_vtol_standard

@@ -14,6 +14,21 @@
 
 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TYPE 4
+param set-default VT_TYPE 2
+param set-default MAV_TYPE 22
+
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR1_PX -1
@@ -24,16 +39,3 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TYPE 1
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS3_TRQ_Y 1.0
-param set-default CA_SV_CS3_TYPE 4
-param set-default VT_TYPE 2
-param set-default MAV_TYPE 22

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -120,8 +120,8 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
 param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
@@ -130,4 +130,4 @@ param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -80,6 +80,10 @@ param set-default VT_TYPE 2
 
 param set-default CA_AIRFRAME 2
 param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR1_PX -1
@@ -90,18 +94,16 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
 
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 15
-param set-default CA_SV_CS0_TRQ_R 1.0
-param set-default CA_SV_CS1_TRQ_P 0.5000
-param set-default CA_SV_CS1_TRQ_R 0.0000
-param set-default CA_SV_CS1_TRQ_Y -0.5000
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_R 0
+param set-default CA_SV_CS1_TRQ_Y -0.5
 param set-default CA_SV_CS1_TYPE 13
-param set-default CA_SV_CS2_TRQ_P 0.5000
-param set-default CA_SV_CS2_TRQ_Y 0.5000
+param set-default CA_SV_CS2_TRQ_P 0.5
+param set-default CA_SV_CS2_TRQ_Y 0.5
 param set-default CA_SV_CS2_TYPE 14
 
 param set-default PWM_MAIN_FUNC1 201

ROMFS/px4fmu_common/init.d/airframes/13030_generic_vtol_quad_tiltrotor

@@ -19,30 +19,30 @@ param set-default MAV_TYPE 21
 param set-default VT_TYPE 1
 
 param set-default CA_AIRFRAME 3
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
 param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
 param set-default CA_ROTOR1_TILT 2
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR2_TILT 3
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
 param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_TL_COUNT 4
 
-
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/13100_generic_vtol_tiltrotor

@@ -12,19 +12,22 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 param set-default CA_AIRFRAME 3
+param set-default CA_ROTOR0_TILT 2
+param set-default CA_ROTOR2_TILT 1
+
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 1
 param set-default CA_ROTOR0_PY 1
-param set-default CA_ROTOR0_TILT 2
 param set-default CA_ROTOR1_PX -1
 param set-default CA_ROTOR1_PY -1
 param set-default CA_ROTOR2_PX 1
 param set-default CA_ROTOR2_PY -1
-param set-default CA_ROTOR2_TILT 1
 param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -1
 param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
+
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5

ROMFS/px4fmu_common/init.d/airframes/14001_generic_mc_with_tilt

@@ -20,16 +20,16 @@ param set-default MAV_TYPE 15
 
 param set-default CA_AIRFRAME 8
 # Tricopter
-param set-default CA_ROTOR0_PX 0.2500
-param set-default CA_ROTOR0_PY 0.4330
-param set-default CA_ROTOR1_PX 0.2500
-param set-default CA_ROTOR1_PY -0.4300
-param set-default CA_ROTOR2_PX -0.5000
-param set-default CA_ROTOR2_PY 0.0000
+param set-default CA_ROTOR0_PX 0.25
+param set-default CA_ROTOR0_PY 0.433
+param set-default CA_ROTOR1_PX 0.25
+param set-default CA_ROTOR1_PY -0.43
+param set-default CA_ROTOR2_PX -0.5
+param set-default CA_ROTOR2_PY 0
 param set-default CA_ROTOR2_TILT 1
 param set-default CA_ROTOR_COUNT 3
-param set-default CA_SV_TL0_MAXA 45.0000
-param set-default CA_SV_TL0_MINA -45.0000
+param set-default CA_SV_TL0_MAXA 45
+param set-default CA_SV_TL0_MINA -45
 param set-default CA_SV_TL0_TD 90
 param set-default CA_SV_TL_COUNT 1
 

ROMFS/px4fmu_common/init.d/airframes/2100_standard_plane

@@ -18,7 +18,7 @@ param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TRQ_P 1
 param set-default CA_SV_CS2_TYPE 3
-param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TRQ_Y 1
 param set-default CA_SV_CS3_TYPE 4

ROMFS/px4fmu_common/init.d/airframes/2106_albatross

@@ -35,17 +35,17 @@ param set-default FW_W_RMAX 0
 param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 7
-param set-default CA_SV_CS0_TRQ_R -0.5000
+param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1 #left aileron
-param set-default CA_SV_CS1_TRQ_R 0.5000
+param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2 #right aileron
-param set-default CA_SV_CS2_TRQ_P 0.5000
-param set-default CA_SV_CS2_TRQ_Y -0.5000
+param set-default CA_SV_CS2_TRQ_P 0.5
+param set-default CA_SV_CS2_TRQ_Y -0.5
 param set-default CA_SV_CS2_TYPE 13 #left A-tail
-param set-default CA_SV_CS3_TRQ_P 0.5000
-param set-default CA_SV_CS3_TRQ_Y 0.5000
+param set-default CA_SV_CS3_TRQ_P 0.5
+param set-default CA_SV_CS3_TRQ_Y 0.5
 param set-default CA_SV_CS3_TYPE 14 #right A-tail
-param set-default CA_SV_CS4_TRQ_Y 1.0000
+param set-default CA_SV_CS4_TRQ_Y 1
 param set-default CA_SV_CS4_TYPE 12
 param set-default CA_SV_CS5_TYPE 9 #left flap
 param set-default CA_SV_CS6_TYPE 10 #right flap

ROMFS/px4fmu_common/init.d/airframes/2507_cloudship

@@ -21,21 +21,21 @@ param set-default CBRK_IO_SAFETY 22027
 param set-default CA_AIRFRAME 9
 
 param set-default CA_ROTOR_COUNT 3
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PY 2.0000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PY -2.0000
-param set-default CA_ROTOR2_AY -1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -10.0000
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PY 2
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PY -2
+param set-default CA_ROTOR2_AY -1
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX -10
 
 param set-default CA_SV_CS_COUNT 1
-param set-default CA_SV_CS0_TRQ_P 1.0000
+param set-default CA_SV_CS0_TRQ_P 1
 
 param set-default CA_R_REV 7
 

ROMFS/px4fmu_common/init.d/airframes/4001_quad_x

@@ -10,15 +10,15 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
-

ROMFS/px4fmu_common/init.d/airframes/4014_s500

@@ -18,14 +18,15 @@ param set-default MC_PITCHRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_I 0.15
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/4015_holybro_s500

@@ -22,14 +22,15 @@ param set-default MC_PITCHRATE_I 0.3
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCHRATE_D 0.004
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -97,18 +97,17 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default THR_MDL_FAC 0.3
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
 # Outputs
@@ -116,4 +115,3 @@ param set-default PWM_AUX_FUNC1 101
 param set-default PWM_AUX_FUNC2 102
 param set-default PWM_AUX_FUNC3 103
 param set-default PWM_AUX_FUNC4 104
-

ROMFS/px4fmu_common/init.d/airframes/4017_nxp_hovergames

@@ -21,14 +21,15 @@ param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_P 0.18
 param set-default MC_PITCHRATE_I 0.15
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/4019_x500_v2

@@ -22,19 +22,20 @@ param set-default MC_PITCHRATE_I 0.3
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCHRATE_D 0.004
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.25
-param set-default CA_ROTOR0_PY 0.25
-param set-default CA_ROTOR1_PX -0.25
-param set-default CA_ROTOR1_PY -0.25
-param set-default CA_ROTOR2_PX 0.25
-param set-default CA_ROTOR2_PY -0.25
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.25
-param set-default CA_ROTOR3_PY 0.25
-param set-default CA_ROTOR3_KM -0.05
-
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5

@@ -98,18 +98,17 @@ param set-default CBRK_IO_SAFETY 22027
 
 param set-default THR_MDL_FAC 0.3
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
 # Outputs
@@ -117,4 +116,3 @@ param set-default PWM_AUX_FUNC1 101
 param set-default PWM_AUX_FUNC2 102
 param set-default PWM_AUX_FUNC3 103
 param set-default PWM_AUX_FUNC4 104
-

ROMFS/px4fmu_common/init.d/airframes/4041_beta75x

@@ -46,22 +46,20 @@ param set-default SYS_HAS_MAG 0
 
 param set-default BAT1_N_CELLS 2
 
+# Square quadrotor X with reverse turn direction
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.03
-param set-default CA_ROTOR0_PY 0.03
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX -0.03
-param set-default CA_ROTOR1_PY -0.03
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
 param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX 0.03
-param set-default CA_ROTOR2_PY -0.03
-param set-default CA_ROTOR2_KM 0.05
-param set-default CA_ROTOR3_PX -0.03
-param set-default CA_ROTOR3_PY 0.03
-param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 
 param set-default PWM_MAIN_FUNC1 104
 param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC3 102
 param set-default PWM_MAIN_FUNC4 103
-

ROMFS/px4fmu_common/init.d/airframes/4050_generic_250

@@ -36,16 +36,15 @@ param set-default SDLOG_PROFILE 19
 param set-default IMU_DGYRO_CUTOFF 50
 param set-default IMU_GYRO_CUTOFF 90
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
-
-

ROMFS/px4fmu_common/init.d/airframes/4052_holybro_qav250

@@ -46,20 +46,20 @@ param set-default MPC_Z_VEL_I_ACC 1.7
 
 param set-default THR_MDL_FAC 0.3
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
-

ROMFS/px4fmu_common/init.d/airframes/4053_holybro_kopis2

@@ -53,16 +53,17 @@ param set-default MC_AIRMODE 1
 
 param set-default EV_TSK_RC_LOSS 1
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 104
@@ -72,5 +73,3 @@ param set-default PWM_MAIN_FUNC4 103
 
 param set-default PWM_MAIN_TIM0 -2
 param set-default PWM_MAIN_TIM1 -2
-
-

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -11,12 +11,11 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-
 # Battery settings
 param set-default BAT_CRIT_THR 0.20
 param set-default BAT_LOW_THR 0.25
 
-param set-default BAT1_CAPACITY 2800.0
+param set-default BAT1_CAPACITY 2800
 param set-default BAT1_N_CELLS 3
 param set-default BAT1_R_INTERNAL 0.02
 param set-default BAT1_V_CHARGED 4.26
@@ -38,7 +37,7 @@ param set-default COM_RC_LOSS_T 3
 
 # ekf2
 param set-default EKF2_TERR_MASK 1
-param set-default EKF2_BARO_NOISE 2.0
+param set-default EKF2_BARO_NOISE 2
 
 param set-default EKF2_BCOEF_X 31.5
 param set-default EKF2_BCOEF_Y 25.5
@@ -56,11 +55,11 @@ param set-default EKF2_MAG_NOISE 0.1
 param set-default EKF2_MIN_RNG 0.15
 
 param set-default EKF2_OF_DELAY 38
-param set-default EKF2_OF_GATE 2.0
+param set-default EKF2_OF_GATE 2
 param set-default EKF2_OF_POS_X -0.035
 param set-default EKF2_OF_POS_Z 0.033
 param set-default EKF2_OF_MIN_RNG 0.01
-param set-default EKF2_OF_A_HMAX 7.0
+param set-default EKF2_OF_A_HMAX 7
 param set-default EKF2_OF_QMIN 30
 
 param set-default EKF2_PCOEF_XN -0.3
@@ -68,18 +67,18 @@ param set-default EKF2_PCOEF_XP -0.4
 param set-default EKF2_PCOEF_YN -0.4
 param set-default EKF2_PCOEF_YP -0.4
 
-param set-default EKF2_RNG_A_VMAX 1.0
+param set-default EKF2_RNG_A_VMAX 1
 param set-default EKF2_RNG_CTRL 0
 param set-default EKF2_RNG_DELAY 55
 param set-default EKF2_RNG_POS_X -0.035
-param set-default EKF2_RNG_POS_Y 0.0
+param set-default EKF2_RNG_POS_Y 0
 param set-default EKF2_RNG_POS_Z 0.033
 
-param set-default EKF2_TERR_NOISE 1.0
+param set-default EKF2_TERR_NOISE 1
 
 
 # Maximum allowed angle velocity in the landed state
-param set-default LNDMC_ROT_MAX 40.0
+param set-default LNDMC_ROT_MAX 40
 
 # Maximum vertical velocity allowed in the landed state
 param set-default LNDMC_Z_VEL_MAX 0.7
@@ -94,36 +93,36 @@ param set-default IMU_GYRO_CUTOFF 65
 param set-default MC_PITCHRATE_P 0.075
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.0005
-param set-default MC_PITCHRATE_MAX 360.0
-param set-default MC_PITCH_P 8.0
+param set-default MC_PITCHRATE_MAX 360
+param set-default MC_PITCH_P 8
 
 # Roll angle & rate setting
 param set-default MC_ROLLRATE_P 0.055
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.0005
-param set-default MC_ROLLRATE_MAX 360.0
-param set-default MC_ROLL_P 8.0
+param set-default MC_ROLLRATE_MAX 360
+param set-default MC_ROLL_P 8
 
 # Yaw angle & rate setting
 param set-default MC_YAWRATE_P 0.1
-param set-default MC_YAWRATE_MAX 120.0
+param set-default MC_YAWRATE_MAX 120
 param set-default MC_YAW_P 2.5
 
-param set-default MPC_ACC_DOWN_MAX 2.0
-param set-default MPC_ACC_HOR 3.0
-param set-default MPC_ACC_HOR_MAX 10.0
-param set-default MPC_ACC_UP_MAX 3.0
+param set-default MPC_ACC_DOWN_MAX 2
+param set-default MPC_ACC_HOR 3
+param set-default MPC_ACC_HOR_MAX 10
+param set-default MPC_ACC_UP_MAX 3
 param set-default MPC_ALT_MODE 0
 param set-default MPC_LAND_SPEED 0.5
 param set-default MPC_MAN_TILT_MAX 20
-param set-default MPC_YAWRAUTO_MAX 80.0
+param set-default MPC_YAWRAUTO_MAX 80
 param set-default MPC_THR_HOVER 0.54
 param set-default MPC_THR_MAX 0.9
 param set-default MPC_THR_MIN 0.06
 param set-default MPC_TILTMAX_AIR 30
-param set-default MPC_XY_P 1.0
-param set-default MPC_Z_P 2.0
-param set-default MPC_Z_VEL_MAX_DN 2.0
+param set-default MPC_XY_P 1
+param set-default MPC_Z_P 2
+param set-default MPC_Z_VEL_MAX_DN 2
 
 # gimbal configuration
 param set-default MNT_MODE_IN 0
@@ -150,21 +149,22 @@ param set-default RC1_TRIM          1000
 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
-param set-default SENS_FLOW_MAXHGT 5.0
+param set-default SENS_FLOW_MAXHGT 5
 
 # ignore the SD card errors and use normal startup sound
 set STARTUP_TUNE "1"
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default TAP_ESC_FUNC1 101

ROMFS/px4fmu_common/init.d/airframes/4071_ifo

@@ -73,23 +73,22 @@ param set-default MAV_1_CONFIG 102
 param set-default MAV_1_MODE 0
 param set-default SER_TEL2_BAUD 57600
 
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
 param set-default PWM_MAIN_TIM0 0
 
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
-

ROMFS/px4fmu_common/init.d/airframes/4073_ifo-s

@@ -91,22 +91,22 @@ param set-default EKF2_OF_POS_Z -0.07
 # Failsafe
 param set-default COM_LOW_BAT_ACT 3
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
 param set-default PWM_MAIN_TIM0 -3
 
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
-

ROMFS/px4fmu_common/init.d/airframes/4500_clover4

@@ -27,16 +27,17 @@ param set-default MPC_XY_P 1.1
 param set-default MPC_Z_VEL_P_ACC 4.8
 param set-default MPC_Z_P 1.2
 
+# Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
 param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101

ROMFS/px4fmu_common/init.d/airframes/4601_droneblocks_dexi_5

@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# @name Droneblocks DEXI 5
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Dennis Baldwin <db@droneblocks.io>
+# @maintainer Alex klimaj <alex@arkelectron.com>
+#
+# @board px4_fmu-v2 exclude
+# @board px4_fmu-v3 exclude
+# @board px4_fmu-v4 exclude
+# @board px4_fmu-v4pro exclude
+# @board px4_fmu-v5 exclude
+# @board px4_fmu-v5x exclude
+# @board px4_fmu-v6x exclude
+# @board bitcraze_crazyflie exclude
+# @board diatone_mamba-f405-mk2 exclude
+# @board ark_fmu-v6x exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_CAPACITY 4000
+param set-default BAT1_N_CELLS 6
+param set-default BAT1_V_EMPTY 3.3
+param set-default BAT1_V_LOAD_DROP 0.5
+param set-default BAT_AVRG_CURRENT 13
+
+# Square quadrotor X PX4 numbering
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.0762
+param set-default CA_ROTOR0_PY 0.09525
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.0762
+param set-default CA_ROTOR1_PY -0.09525
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.0762
+param set-default CA_ROTOR2_PY -0.09525
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.0762
+param set-default CA_ROTOR3_PY 0.09525
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default EKF2_MIN_RNG 0.01
+param set-default EKF2_OF_POS_X 0.043
+param set-default EKF2_OF_POS_Y 0.011
+param set-default EKF2_OF_QMIN_GND 1
+param set-default EKF2_RNG_POS_X 0.043
+param set-default EKF2_RNG_POS_Y 0.0
+
+param set-default IMU_GYRO_DNF_EN 2
+
+param set-default MC_PITCHRATE_D 0.0013
+param set-default MC_PITCHRATE_I 0.185
+param set-default MC_PITCHRATE_P 0.105
+param set-default MC_PITCH_P 7.5
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLLRATE_I 0.165
+param set-default MC_ROLLRATE_P 0.095
+param set-default MC_ROLL_P 7.5
+param set-default MC_YAWRATE_I 0.35
+param set-default MC_YAWRATE_P 0.13
+
+param set-default MPC_THR_HOVER 0.22
+param set-default MPC_THR_MAX 0.5
+param set-default MPC_THR_MIN 0.025
+param set-default MPC_VEL_MANUAL 5.0
+param set-default MPC_XY_VEL_MAX 8.0
+
+param set-default RTL_RETURN_ALT 15
+
+param set-default SENS_FLOW_MINHGT 0.0
+
+param set-default SER_TEL2_BAUD 3000000
+
+param set-default UXRCE_DDS_CFG 102

ROMFS/px4fmu_common/init.d/airframes/4901_crazyflie21

@@ -18,7 +18,6 @@
 . ${R}etc/init.d/rc.mc_defaults
 
 
-param set-default SYS_MC_EST_GROUP 2
 param set-default SYS_HAS_MAG 0
 param set-default EKF2_OF_CTRL 1
 param set-default EKF2_GPS_CTRL 0
@@ -50,22 +49,22 @@ param set-default MPC_MAX_FLOW_HGT 3
 
 param set-default NAV_RCL_ACT 3
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.03
-param set-default CA_ROTOR0_PY 0.03
-param set-default CA_ROTOR1_PX -0.03
-param set-default CA_ROTOR1_PY 0.03
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX -0.03
-param set-default CA_ROTOR2_PY -0.03
-param set-default CA_ROTOR3_PX 0.03
-param set-default CA_ROTOR3_PY -0.03
-param set-default CA_ROTOR3_KM -0.05
-
 # Run the motors at 328.125 kHz (recommended)
 param set-default PWM_MAIN_TIM0 3921
 param set-default PWM_MAIN_TIM1 3921
 
+# Square quadrotor X clockwise numbering
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 1
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY 1
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR2_PX -1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR3_PX 1
+param set-default CA_ROTOR3_PY -1
+param set-default CA_ROTOR3_KM -0.05
+
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103

ROMFS/px4fmu_common/init.d/airframes/50004_nxpcup_car_dfrobot_gpx

@@ -36,9 +36,9 @@ param set-default GND_THR_MAX 0.5
 param set-default GND_MAX_ANG 1.042
 param set-default GND_WHEEL_BASE 0.17
 
-# TODO: Set to -1.0, to allow reversing. This will require many changes in the codebase
+# TODO: Set to -1, to allow reversing. This will require many changes in the codebase
 # to support negative throttle.
-param set-default GND_THR_MIN 0.0
+param set-default GND_THR_MIN 0
 param set-default GND_SPEED_P 0.25
 param set-default GND_SPEED_I 3
 param set-default GND_SPEED_D 0.001

ROMFS/px4fmu_common/init.d/airframes/5001_quad_+

@@ -1,12 +1,10 @@
 #!/bin/sh
 #
-# @name Generic 10" Quad + geometry
+# @name Generic Quad + geometry
 #
 # @type Quadrotor +
 # @class Copter
 #
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
 # @board bitcraze_crazyflie exclude
 # @board px4_fmu-v2 exclude
 #
@@ -14,13 +12,17 @@
 . ${R}etc/init.d/rc.mc_defaults
 
 param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
+
+param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PY 1
+
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY -1
+
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY 0
+param set-default CA_ROTOR2_KM -0.05
+
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 0
+param set-default CA_ROTOR3_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/60000_uuv_generic

@@ -5,8 +5,6 @@
 # @type Underwater Robot
 # @class Underwater Robot
 #
-# @maintainer
-#
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
 #

ROMFS/px4fmu_common/init.d/airframes/60001_uuv_hippocampus

@@ -12,38 +12,7 @@
 #
 
 . ${R}etc/init.d/rc.uuv_defaults
-
-param set-default CA_AIRFRAME 7
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1
-param set-default CA_ROTOR0_AY 0
-param set-default CA_ROTOR0_AZ 0
-param set-default CA_ROTOR0_KM 0
-param set-default CA_ROTOR0_PX 0
-param set-default CA_ROTOR0_PY -0.3
-param set-default CA_ROTOR0_PZ -0.3
-param set-default CA_ROTOR1_AX 1
-param set-default CA_ROTOR1_AY 0
-param set-default CA_ROTOR1_AZ 0
-param set-default CA_ROTOR1_KM 0
-param set-default CA_ROTOR1_PX 0
-param set-default CA_ROTOR1_PY 0.3
-param set-default CA_ROTOR1_PZ -0.3
-param set-default CA_ROTOR2_AX 1
-param set-default CA_ROTOR2_AY 0
-param set-default CA_ROTOR2_AZ 0
-param set-default CA_ROTOR2_KM 0
-param set-default CA_ROTOR2_PX 0
-param set-default CA_ROTOR2_PY 0.3
-param set-default CA_ROTOR2_PZ 0.3
-param set-default CA_ROTOR3_AX 1
-param set-default CA_ROTOR3_AY 0
-param set-default CA_ROTOR3_AZ 0
-param set-default CA_ROTOR3_KM 0
-param set-default CA_ROTOR3_PX 0
-param set-default CA_ROTOR3_PY -0.3
-param set-default CA_ROTOR3_PZ 0.3
+. ${R}etc/init.d/airframes/60000_uuv_generic
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d/airframes/60002_uuv_bluerov2_heavy

@@ -30,7 +30,7 @@ param set-default MAV_1_CONFIG 102
 
 param set-default BAT1_A_PER_V 37.8798
 param set-default BAT1_CAPACITY 18000
-param set-default BAT1_V_DIV 11.0
+param set-default BAT1_V_DIV 11
 param set-default BAT1_N_CELLS 4
 param set-default BAT_V_OFFS_CURR 0.33
 
@@ -38,49 +38,49 @@ param set-default CA_AIRFRAME 7
 
 param set-default CA_ROTOR_COUNT 8
 param set-default CA_R_REV 255
-param set-default CA_ROTOR0_AX 1.0000
-param set-default CA_ROTOR0_AY -1.0000
-param set-default CA_ROTOR0_AZ 0.0000
-param set-default CA_ROTOR0_KM 0.0000
-param set-default CA_ROTOR0_PX 0.5000
-param set-default CA_ROTOR0_PY 0.3000
-param set-default CA_ROTOR0_PZ 0.2000
-param set-default CA_ROTOR1_AX 1.0000
-param set-default CA_ROTOR1_AY 1.0000
-param set-default CA_ROTOR1_AZ 0.0000
-param set-default CA_ROTOR1_KM 0.0000
-param set-default CA_ROTOR1_PX 0.5000
-param set-default CA_ROTOR1_PY -0.3000
-param set-default CA_ROTOR1_PZ 0.2000
-param set-default CA_ROTOR2_AX 1.0000
-param set-default CA_ROTOR2_AY 1.0000
-param set-default CA_ROTOR2_AZ 0.0000
-param set-default CA_ROTOR2_KM 0.0000
-param set-default CA_ROTOR2_PX -0.5000
-param set-default CA_ROTOR2_PY 0.3000
-param set-default CA_ROTOR2_PZ 0.2000
-param set-default CA_ROTOR3_AX 1.0000
-param set-default CA_ROTOR3_AY -1.0000
-param set-default CA_ROTOR3_AZ 0.0000
-param set-default CA_ROTOR3_KM 0.0000
-param set-default CA_ROTOR3_PX -0.5000
-param set-default CA_ROTOR3_PY -0.3000
-param set-default CA_ROTOR3_PZ 0.2000
-param set-default CA_ROTOR4_AZ -1.0000
-param set-default CA_ROTOR4_KM 0.0000
-param set-default CA_ROTOR4_PX 0.5000
-param set-default CA_ROTOR4_PY 0.5000
-param set-default CA_ROTOR5_AZ 1.0000
-param set-default CA_ROTOR5_KM 0.0000
-param set-default CA_ROTOR5_PX 0.5000
-param set-default CA_ROTOR5_PY -0.5000
-param set-default CA_ROTOR6_AZ 1.0000
-param set-default CA_ROTOR6_KM 0.0000
-param set-default CA_ROTOR6_PX -0.5000
-param set-default CA_ROTOR6_PY 0.5000
-param set-default CA_ROTOR7_KM 0.0000
-param set-default CA_ROTOR7_PX -0.5000
-param set-default CA_ROTOR7_PY -0.5000
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AY -1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX 0.5
+param set-default CA_ROTOR0_PY 0.3
+param set-default CA_ROTOR0_PZ 0.2
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AY 1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX 0.5
+param set-default CA_ROTOR1_PY -0.3
+param set-default CA_ROTOR1_PZ 0.2
+param set-default CA_ROTOR2_AX 1
+param set-default CA_ROTOR2_AY 1
+param set-default CA_ROTOR2_AZ 0
+param set-default CA_ROTOR2_KM 0
+param set-default CA_ROTOR2_PX -0.5
+param set-default CA_ROTOR2_PY 0.3
+param set-default CA_ROTOR2_PZ 0.2
+param set-default CA_ROTOR3_AX 1
+param set-default CA_ROTOR3_AY -1
+param set-default CA_ROTOR3_AZ 0
+param set-default CA_ROTOR3_KM 0
+param set-default CA_ROTOR3_PX -0.5
+param set-default CA_ROTOR3_PY -0.3
+param set-default CA_ROTOR3_PZ 0.2
+param set-default CA_ROTOR4_AZ -1
+param set-default CA_ROTOR4_KM 0
+param set-default CA_ROTOR4_PX 0.5
+param set-default CA_ROTOR4_PY 0.5
+param set-default CA_ROTOR5_AZ 1
+param set-default CA_ROTOR5_KM 0
+param set-default CA_ROTOR5_PX 0.5
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR6_AZ 1
+param set-default CA_ROTOR6_KM 0
+param set-default CA_ROTOR6_PX -0.5
+param set-default CA_ROTOR6_PY 0.5
+param set-default CA_ROTOR7_KM 0
+param set-default CA_ROTOR7_PX -0.5
+param set-default CA_ROTOR7_PY -0.5
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d/airframes/6001_hexa_x

@@ -16,10 +16,10 @@
 param set-default MAV_TYPE 13
 
 param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PX 0
 param set-default CA_ROTOR0_PY 0.5
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PX 0
 param set-default CA_ROTOR1_PY -0.5
 param set-default CA_ROTOR2_PX 0.43
 param set-default CA_ROTOR2_PY -0.25

ROMFS/px4fmu_common/init.d/airframes/6002_draco_r

@@ -97,10 +97,10 @@ param set-default SER_TEL2_BAUD 921600
 
 
 param set-default CA_ROTOR_COUNT 6
-param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PX 0
 param set-default CA_ROTOR0_PY 0.5
 param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PX 0
 param set-default CA_ROTOR1_PY -0.5
 param set-default CA_ROTOR2_PX 0.43
 param set-default CA_ROTOR2_PY -0.25

ROMFS/px4fmu_common/init.d/airframes/7001_hexa_+

@@ -17,10 +17,10 @@ param set-default MAV_TYPE 13
 
 param set-default CA_ROTOR_COUNT 6
 param set-default CA_ROTOR0_PX 0.5
-param set-default CA_ROTOR0_PY 0.0
+param set-default CA_ROTOR0_PY 0
 param set-default CA_ROTOR0_KM -0.05
 param set-default CA_ROTOR1_PX -0.5
-param set-default CA_ROTOR1_PY 0.0
+param set-default CA_ROTOR1_PY 0
 param set-default CA_ROTOR2_PX -0.25
 param set-default CA_ROTOR2_PY -0.43
 param set-default CA_ROTOR2_KM -0.05

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -32,94 +32,128 @@
 ############################################################################
 
 px4_add_romfs_files(
-	# [0-999] Reserved (historical)"
-
-	# [1000, 1999] Simulation setups"
-	1001_rc_quad_x.hil
-	1002_standard_vtol.hil
-	1100_rc_quad_x_sih.hil
-	1101_rc_plane_sih.hil
-	1102_tailsitter_duo_sih.hil
-
-	# [2000, 2999] Standard planes"
-	2100_standard_plane
-	2106_albatross
-
-	2507_cloudship
-
-	# [3000, 3999] Flying wing"
-	3000_generic_wing
-
-	# [4000, 4999] Quadrotor x"
-	4001_quad_x
-	4014_s500
-	4015_holybro_s500
-	4016_holybro_px4vision
-	4017_nxp_hovergames
-	4019_x500_v2
-	4020_holybro_px4vision_v1_5
-	4041_beta75x
-	4050_generic_250
-	4052_holybro_qav250
-	4053_holybro_kopis2
-	4061_atl_mantis_edu
-	4071_ifo
-	4073_ifo-s
-	4500_clover4
-	4901_crazyflie21
-
-	# [5000, 5999] Quadrotor +"
-	5001_quad_+
-
-	# [6000, 6999] Hexarotor x"
-	6001_hexa_x
-	6002_draco_r
-
-	# [7000, 7999] Hexarotor +"
-	7001_hexa_+
-
-	# [8000, 8999] Octorotor +"
-	8001_octo_x
-
-	# [9000, 9999] Octorotor +"
-	9001_octo_+
-
-	# [11000, 11999] Hexa Cox
-	11001_hexa_cox
-
-	# [12000, 12999] Octo Cox
-	12001_octo_cox
-
-	# [13000, 13999] VTOL
-	13000_generic_vtol_standard
-	13100_generic_vtol_tiltrotor
-	13013_deltaquad
-	13014_vtol_babyshark
-	13030_generic_vtol_quad_tiltrotor
-	13200_generic_vtol_tailsitter
-
-	# [14000, 14999] MC with tilt
-	14001_generic_mc_with_tilt
-
-	16001_helicopter
-
-	# [17000, 17999] Autogyro
-	17002_TF-AutoG2
-	17003_TF-G2
+	# [0-999] Reserved (historical)
 
 	# [18000, 18999] High-altitude balloons
 	18001_TF-B1
 
 	# [22000, 22999] Reserve for custom models
-
-	24001_dodeca_cox
-
-	50000_generic_ground_vehicle
-	50004_nxpcup_car_dfrobot_gpx
-	50003_aion_robotics_r1_rover
-
-	# [60000, 61000] (Unmanned) Underwater Robots
-	60000_uuv_generic
-	60001_uuv_hippocampus
-	60002_uuv_bluerov2_heavy
 )
+
+if(CONFIG_MODULES_SIMULATION_PWM_OUT_SIM)
+	px4_add_romfs_files(
+		# [1000, 1999] Simulation setups
+		1001_rc_quad_x.hil
+		1002_standard_vtol.hil
+		1100_rc_quad_x_sih.hil
+		1101_rc_plane_sih.hil
+		1102_tailsitter_duo_sih.hil
+	)
+endif()
+
+if(CONFIG_MODULES_MC_RATE_CONTROL)
+	px4_add_romfs_files(
+		# [4000, 4999] Quadrotor x
+		4001_quad_x
+		4014_s500
+		4015_holybro_s500
+		4016_holybro_px4vision
+		4017_nxp_hovergames
+		4019_x500_v2
+		4020_holybro_px4vision_v1_5
+		4041_beta75x
+		4050_generic_250
+		4052_holybro_qav250
+		4053_holybro_kopis2
+		4061_atl_mantis_edu
+		4071_ifo
+		4073_ifo-s
+		4500_clover4
+		4601_droneblocks_dexi_5
+		4901_crazyflie21
+
+		# [5000, 5999] Quadrotor +
+		5001_quad_+
+
+		# [6000, 6999] Hexarotor x
+		6001_hexa_x
+		6002_draco_r
+
+		# [7000, 7999] Hexarotor +
+		7001_hexa_+
+
+		# [8000, 8999] Octorotor +
+		8001_octo_x
+
+		# [9000, 9999] Octorotor +
+		9001_octo_+
+
+		# [11000, 11999] Hexa Cox
+		11001_hexa_cox
+
+		# [12000, 12999] Octo Cox
+		12001_octo_cox
+
+		# [14000, 14999] MC with tilt
+		14001_generic_mc_with_tilt
+
+		16001_helicopter
+
+		24001_dodeca_cox
+	)
+endif()
+
+if(CONFIG_MODULES_FW_RATE_CONTROL)
+	px4_add_romfs_files(
+		# [2000, 2999] Standard planes
+		2100_standard_plane
+		2106_albatross
+
+		# [3000, 3999] Flying wing
+		3000_generic_wing
+
+		# [17000, 17999] Autogyro
+		17002_TF-AutoG2
+		17003_TF-G2
+	)
+endif()
+
+if(CONFIG_MODULES_AIRSHIP_ATT_CONTROL)
+	px4_add_romfs_files(
+		2507_cloudship
+	)
+endif()
+
+if(CONFIG_MODULES_VTOL_ATT_CONTROL)
+	px4_add_romfs_files(
+		# [13000, 13999] VTOL
+		13000_generic_vtol_standard
+		13100_generic_vtol_tiltrotor
+		13013_deltaquad
+		13014_vtol_babyshark
+		13030_generic_vtol_quad_tiltrotor
+		13200_generic_vtol_tailsitter
+	)
+endif()
+
+if(CONFIG_MODULES_ROVER_POS_CONTROL)
+	px4_add_romfs_files(
+		50000_generic_ground_vehicle
+		50004_nxpcup_car_dfrobot_gpx
+	)
+endif()
+
+if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
+	px4_add_romfs_files(
+		50003_aion_robotics_r1_rover
+	)
+endif()
+
+if(CONFIG_MODULES_UUV_ATT_CONTROL)
+	px4_add_romfs_files(
+		# [60000, 61000] (Unmanned) Underwater Robots
+		60000_uuv_generic
+		60001_uuv_hippocampus
+		60002_uuv_bluerov2_heavy
+	)
+endif()

ROMFS/px4fmu_common/init.d/rc.airship_apps

@@ -5,49 +5,6 @@
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
 
-###############################################################################
-#                       Begin Estimator Group Selection                       #
-###############################################################################
-
-#
-# LPE
-#
-if param compare SYS_MC_EST_GROUP 1
-then
-	#
-	# Try to start LPE. If it fails, start EKF2 as a default.
-	# Unfortunately we do not build it on px4_fmu-v2 due to a limited flash.
-	#
-	if attitude_estimator_q start
-	then
-		echo "WARN [init] Estimator LPE unsupported, EKF2 recommended."
-		local_position_estimator start
-	else
-		echo "ERROR [init] Estimator LPE not available. Using EKF2"
-		param set SYS_MC_EST_GROUP 2
-		param save
-		reboot
-	fi
-else
-	#
-	# Q estimator (attitude estimation only)
-	#
-	if param compare SYS_MC_EST_GROUP 3
-	then
-		attitude_estimator_q start
-	else
-		#
-		# EKF2
-		#
-		param set SYS_MC_EST_GROUP 2
-		ekf2 start &
-	fi
-fi
-
-###############################################################################
-#                        End Estimator Group Selection                        #
-###############################################################################
-
 #
 # Start Control Allocator
 #

ROMFS/px4fmu_common/init.d/rc.balloon_apps

@@ -4,39 +4,3 @@
 #
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
-
-#
-# Start the attitude and position estimator.
-#
-
-if param compare SYS_MC_EST_GROUP 1
-then
-	#
-	# Try to start LPE. If it fails, start EKF2 as a default.
-	# Unfortunately we do not build it on px4_fmu-v2 due to a limited flash.
-	#
-	if attitude_estimator_q start
-	then
-		echo "WARN [init] Estimator LPE unsupported, EKF2 recommended."
-		local_position_estimator start
-	else
-		echo "ERROR [init] Estimator LPE not available. Using EKF2"
-		param set SYS_MC_EST_GROUP 2
-		param save
-		reboot
-	fi
-else
-	#
-	# Q estimator (attitude estimation only)
-	#
-	if param compare SYS_MC_EST_GROUP 3
-	then
-		attitude_estimator_q start
-	else
-		#
-		# EKF2
-		#
-		param set SYS_MC_EST_GROUP 2
-		ekf2 start &
-	fi
-fi

ROMFS/px4fmu_common/init.d/rc.balloon_defaults

@@ -13,4 +13,6 @@ param set-default MAV_TYPE 8
 #
 # Default parameters for balloon UAVs.
 #
-param set-default SYS_MC_EST_GROUP 1
+param set-default LPE_EN 1
+param set-default ATT_EN 1
+param set-default EKF2_EN 0

ROMFS/px4fmu_common/init.d/rc.fw_apps

@@ -5,11 +5,6 @@
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
 
-#
-# Start the attitude and position estimator.
-#
-ekf2 start &
-
 #
 # Start Control Allocator
 #

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -28,13 +28,12 @@ param set-default EKF2_ARSP_THR 8
 param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_GPS_CHECK 21
 param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
 param set-default EKF2_REQ_EPH 10
 param set-default EKF2_REQ_EPV 10
 param set-default EKF2_REQ_HDRIFT 0.5
 param set-default EKF2_REQ_SACC 1
-param set-default EKF2_REQ_VDRIFT 1.0
-param set-default EKF2_RNG_QLTY_T 3.0
+param set-default EKF2_REQ_VDRIFT 1
+param set-default EKF2_RNG_QLTY_T 3
 
 param set-default RTL_TYPE 1
 param set-default RTL_RETURN_ALT 100

ROMFS/px4fmu_common/init.d/rc.mc_apps

@@ -5,49 +5,6 @@
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
 
-###############################################################################
-#                       Begin Estimator Group Selection                       #
-###############################################################################
-
-#
-# LPE
-#
-if param compare SYS_MC_EST_GROUP 1
-then
-	#
-	# Try to start LPE. If it fails, start EKF2 as a default.
-	# Unfortunately we do not build it on px4_fmu-v2 due to a limited flash.
-	#
-	if attitude_estimator_q start
-	then
-		echo "WARN [init] Estimator LPE unsupported, EKF2 recommended."
-		local_position_estimator start
-	else
-		echo "ERROR [init] Estimator LPE not available. Using EKF2"
-		param set SYS_MC_EST_GROUP 2
-		param save
-		reboot
-	fi
-else
-	#
-	# Q estimator (attitude estimation only)
-	#
-	if param compare SYS_MC_EST_GROUP 3
-	then
-		attitude_estimator_q start
-	else
-		#
-		# EKF2
-		#
-		param set SYS_MC_EST_GROUP 2
-		ekf2 start &
-	fi
-fi
-
-###############################################################################
-#                        End Estimator Group Selection                        #
-###############################################################################
-
 #
 # Start Control Allocator
 #

ROMFS/px4fmu_common/init.d/rc.rover_apps

@@ -5,11 +5,6 @@
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
 
-#
-# Start the attitude and position estimator.
-#
-ekf2 start &
-
 #
 # Start Control Allocator
 #