mavlink: return unsupported frame result when that's the case

mavlink: spacing, naming of command frame handling
Update MAVLink to contain _INT frame deprecation warning
2026-06-05 17:30:04 +08:00 · 2024-05-02 17:32:37 +02:00 · 2024-05-02 17:30:59 +02:00 · 2024-05-02 17:19:31 +02:00 · 2024-05-02 16:49:37 +02:00 · 2024-05-02 16:49:37 +02:00
218 changed files with 1084 additions and 6161 deletions
@@ -47,7 +47,7 @@ pipeline {
                     "ark_fmu-v6x_bootloader",
                     "ark_fmu-v6x_default",
                     "ark_pi6x_bootloader",
-                     "ark_pi6x_default",
+                     "ark_pi6x_default"
                     "atl_mantis-edu_default",
                     "av_x-v1_default",
                     "bitcraze_crazyflie21_default",
@@ -15,6 +15,7 @@
 	"extensions": [
 		"chiehyu.vscode-astyle",
 		"dan-c-underwood.arm",
+		"editorconfig.editorconfig",
 		"fredericbonnet.cmake-test-adapter",
 		"github.vscode-pull-request-github",
 		"marus25.cortex-debug",
@@ -4,6 +4,7 @@
    "recommendations": [
        "chiehyu.vscode-astyle",
        "dan-c-underwood.arm",
+        "editorconfig.editorconfig",
        "fredericbonnet.cmake-test-adapter",
        "github.vscode-pull-request-github",
        "marus25.cortex-debug",
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2024 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -132,9 +132,7 @@ list(GET VERSION_LIST 2 PX4_VERSION_PATCH)
 string(REPLACE "-" ";" PX4_VERSION_PATCH ${PX4_VERSION_PATCH})
 list(GET PX4_VERSION_PATCH 0 PX4_VERSION_PATCH)

-# # Capture only the hash part after 'g'
-string(REGEX MATCH "g([a-f0-9]+)$" GIT_HASH "${PX4_GIT_TAG}")
-set(PX4_GIT_HASH ${CMAKE_MATCH_1})
+message(STATUS "PX4 version: ${PX4_GIT_TAG} (${PX4_VERSION_MAJOR}.${PX4_VERSION_MINOR}.${PX4_VERSION_PATCH})")

 define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 BRIEF_DOCS "PX4 module libs"
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2015 - 2024 PX4 Development Team. All rights reserved.
+# Copyright (c) 2015 - 2020 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -323,32 +323,7 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: \
-	ark_fmu-v6x_bootloader \
-	ark_pi6x_bootloader \
-	cuav_nora_bootloader \
-	cuav_x7pro_bootloader \
-	cubepilot_cubeorange_bootloader \
-	cubepilot_cubeorangeplus_bootloader \
-	hkust_nxt-dual_bootloader \
-	hkust_nxt-v1_bootloader \
-	holybro_durandal-v1_bootloader \
-	holybro_kakuteh7_bootloader \
-	holybro_kakuteh7mini_bootloader \
-	holybro_kakuteh7v2_bootloader \
-	matek_h743_bootloader \
-	matek_h743-mini_bootloader \
-	matek_h743-slim_bootloader \
-	modalai_fc-v2_bootloader \
-	mro_ctrl-zero-classic_bootloader \
-	mro_ctrl-zero-h7_bootloader \
-	mro_ctrl-zero-h7-oem_bootloader \
-	mro_pixracerpro_bootloader \
-	px4_fmu-v6c_bootloader \
-	px4_fmu-v6u_bootloader \
-	px4_fmu-v6x_bootloader \
-	px4_fmu-v6xrt_bootloader \
-	siyi_n7_bootloader
+bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -439,14 +439,6 @@ else
 	# Must be started after the serial config is read
 	rc_input start $RC_INPUT_ARGS

-	# Manages USB interface
-	if ! cdcacm_autostart start
-	then
-		sercon
-		echo "Starting MAVLink on /dev/ttyACM0"
-		mavlink start -d /dev/ttyACM0
-	fi
-
 	#
 	# Play the startup tune (if not disabled or there is an error)
 	#
@@ -34,24 +34,23 @@ def extract_timer(line):
    if search:
        return search.group(1), 'generic'

-    # nxp rt1062 format: initIOPWM(PWM::FlexPWM2),
-    search = re.search('PWM::Flex([0-9a-zA-Z_]+)[,\)]', line, re.IGNORECASE)
+    # NXP FlexPWM format format: initIOPWM(PWM::FlexPWM2),
+    search = re.search('PWM::Flex([0-9a-zA-Z_]+)..PWM::Submodule([0-9])[,\)]', line, re.IGNORECASE)
    if search:
-        return search.group(1), 'imxrt'
+        return (search.group(1) + '_' +  search.group(2)), 'imxrt'

    return None, 'unknown'

-def extract_timer_from_channel(line, num_channels_already_found):
+def extract_timer_from_channel(line, timer_names):
    # Try format: initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
    search = re.search('Timer::([0-9a-zA-Z_]+), ', line, re.IGNORECASE)
    if search:
        return search.group(1)

-    # nxp rt1062 format: initIOTimerChannel(io_timers, {PWM::PWM2_PWM_A, PWM::Submodule0}, IOMUX::Pad::GPIO_B0_06),
-    search = re.search('PWM::(PWM[0-9]+)[_,\)]', line, re.IGNORECASE)
+    # NXP FlexPWM format: initIOTimerChannel(io_timers, {PWM::PWM2_PWM_A, PWM::Submodule0}, IOMUX::Pad::GPIO_B0_06),
+    search = re.search('PWM::(PWM[0-9]+).*PWM::Submodule([0-9])', line, re.IGNORECASE)
    if search:
-        # imxrt uses a 1:1 timer group to channel association
-        return str(num_channels_already_found)
+        return str(timer_names.index((search.group(1) + '_' +  search.group(2))))

    return None

@@ -69,6 +68,7 @@ def get_timer_groups(timer_config_file, verbose=False):
    open_idx, close_idx = find_matching_brackets(('{', '}'), timer_config, verbose)
    timers_str = timer_config[open_idx:close_idx]
    timers = []
+    timer_names = []
    for line in timers_str.splitlines():
        line = line.strip()
        if len(line) == 0 or line.startswith('//'):
@@ -77,14 +77,12 @@ def get_timer_groups(timer_config_file, verbose=False):

        if timer_type == 'imxrt':
            if verbose: print('imxrt timer found')
-            max_num_channels = 16 # Just add a fixed number of timers
-            timers = [str(i) for i in range(max_num_channels)]
-            dshot_support = {str(i): False for i in range(max_num_channels)}
+            timer_names.append(timer)
+            timers.append(str(len(timers)))
+            dshot_support = {str(i): False for i in range(16)}
            for i in range(8): # First 8 channels support dshot
                dshot_support[str(i)] = True
-            break
-
-        if timer:
+        elif timer:
            if verbose: print('found timer def: {:}'.format(timer))
            dshot_support[timer] = 'DMA' in line
            timers.append(timer)
@@ -111,7 +109,7 @@ def get_timer_groups(timer_config_file, verbose=False):
            continue

        if verbose: print('--'+line+'--')
-        timer = extract_timer_from_channel(line, len(channel_timers))
+        timer = extract_timer_from_channel(line, timer_names)

        if timer:
            if verbose: print('Found timer: {:} in channel line {:}'.format(timer, line))
@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
 ############################################################################
 #
-#   Copyright (c) 2012-2024 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -50,6 +50,9 @@
 #       Currently only used for informational purposes.
 #

+# for python2.7 compatibility
+from __future__ import print_function
+
 import sys
 import argparse
 import binascii
@@ -67,32 +70,35 @@ from sys import platform as _platform
 try:
    import serial
 except ImportError as e:
-    print(f"Failed to import serial: {e}")
+    print("Failed to import serial: " + str(e))
    print("")
    print("You may need to install it using:")
-    print("    python -m pip install pyserial")
+    print("    pip3 install --user pyserial")
    print("")
    sys.exit(1)


+# Define time to use time.time() by default
+def _time():
+    return time.time()
+
 # Detect python version
 if sys.version_info[0] < 3:
-    raise RuntimeError("Python 2 is not supported. Please try again using Python 3.")
-    sys.exit(1)
-
-
-# Use monotonic time where available
-def _time():
-    try:
-        return time.monotonic()
-    except Exception:
-        return time.time()
+    runningPython3 = False
+else:
+    runningPython3 = True
+    if sys.version_info[1] >=3:
+        # redefine to use monotonic time when available
+        def _time():
+            try:
+                return time.monotonic()
+            except Exception:
+                return time.time()

 class FirmwareNotSuitableException(Exception):
    def __init__(self, message):
        super(FirmwareNotSuitableException, self).__init__(message)

-
 class firmware(object):
    '''Loads a firmware file'''

@@ -157,13 +163,13 @@ class firmware(object):

    def crc(self, padlen):
        state = self.__crc32(self.image, int(0))
-        for _ in range(len(self.image), (padlen - 1), 4):
+        for i in range(len(self.image), (padlen - 1), 4):
            state = self.__crc32(self.crcpad, state)
        return state


-class uploader:
-    '''Uploads a firmware file to the PX4 bootloader'''
+class uploader(object):
+    '''Uploads a firmware file to the PX FMU bootloader'''

    # protocol bytes
    INSYNC          = b'\x12'
@@ -189,8 +195,6 @@ class uploader:
    GET_CHIP        = b'\x2c'     # rev5+  , get chip version
    SET_BOOT_DELAY  = b'\x2d'     # rev5+  , set boot delay
    GET_CHIP_DES    = b'\x2e'     # rev5+  , get chip description in ASCII
-    GET_VERSION     = b'\x2f'     # rev5+  , get chip description in ASCII
-    CHIP_FULL_ERASE = b'\x40'     # full erase of flash, rev6+
    MAX_DES_LENGTH  = 20

    REBOOT          = b'\x30'
@@ -201,7 +205,6 @@ class uploader:
    INFO_BOARD_ID   = b'\x02'        # board type
    INFO_BOARD_REV  = b'\x03'        # board revision
    INFO_FLASH_SIZE = b'\x04'        # max firmware size in bytes
-    BL_VERSION      = b'\x07'        # get bootloader version, e.g. major.minor.patch.githash (up to 20 chars)

    PROG_MULTI_MAX  = 252            # protocol max is 255, must be multiple of 4
    READ_MULTI_MAX  = 252            # protocol max is 255
@@ -232,7 +235,6 @@ class uploader:
        self.baudrate_bootloader = baudrate_bootloader
        self.baudrate_flightstack = baudrate_flightstack
        self.baudrate_flightstack_idx = -1
-        self.force_erase = False

    def close(self):
        if self.port is not None:
@@ -355,22 +357,19 @@ class uploader:
            self.port.baudrate = self.baudrate_bootloader * 2.33
        except NotImplementedError as e:
            # This error can occur because pySerial on Windows does not support odd baudrates
-            print(f"{e} -> could not check for FTDI device, assuming USB connection")
+            print(str(e) + " -> could not check for FTDI device, assuming USB connection")
            return

        self.__send(uploader.GET_SYNC +
                    uploader.EOC)
        try:
            self.__getSync(False)
-        except RuntimeError:
+        except:
            # if it fails we are on a real serial port - only leave this enabled on Windows
            if sys.platform.startswith('win'):
                self.ackWindowedMode = True
        finally:
-            try:
-                self.port.baudrate = self.baudrate_bootloader
-            except Exception:
-                pass
+            self.port.baudrate = self.baudrate_bootloader

    # send the GET_DEVICE command and wait for an info parameter
    def __getInfo(self, param):
@@ -411,17 +410,6 @@ class uploader:
        pieces = value.split(b",")
        return pieces

-    def __getVersion(self):
-        self.__send(uploader.GET_VERSION + uploader.EOC)
-        try:
-            length = self.__recv_int()
-            value = self.__recv(length)
-            self.__getSync()
-        except RuntimeError:
-            # Bootloader doesn't support version call
-            return "unknown"
-        return value.decode()
-
    def __drawProgressBar(self, label, progress, maxVal):
        if maxVal < progress:
            progress = maxVal
@@ -433,16 +421,10 @@ class uploader:

    # send the CHIP_ERASE command and wait for the bootloader to become ready
    def __erase(self, label):
-        print(f"Windowed mode: {self.ackWindowedMode}")
+        print("Windowed mode: %s" % self.ackWindowedMode)
        print("\n", end='')
-
-        if self.force_erase:
-            print("Trying force erase of full chip...\n")
-            self.__send(uploader.CHIP_FULL_ERASE +
-                        uploader.EOC)
-        else:
-            self.__send(uploader.CHIP_ERASE +
-                        uploader.EOC)
+        self.__send(uploader.CHIP_ERASE +
+                    uploader.EOC)

        # erase is very slow, give it 30s
        deadline = _time() + 30.0
@@ -459,14 +441,9 @@ class uploader:

            if self.__trySync():
                self.__drawProgressBar(label, 10.0, 10.0)
-                if self.force_erase:
-                    print("\nForce erase done.\n")
                return

-        if self.force_erase:
-            raise RuntimeError("timed out waiting for erase, force erase is likely not supported by bootloader!")
-        else:
-            raise RuntimeError("timed out waiting for erase")
+        raise RuntimeError("timed out waiting for erase")

    # send a PROG_MULTI command to write a collection of bytes
    def __program_multi(self, data, windowMode):
@@ -604,11 +581,8 @@ class uploader:
        self.board_rev = self.__getInfo(uploader.INFO_BOARD_REV)
        self.fw_maxsize = self.__getInfo(uploader.INFO_FLASH_SIZE)

-        self.version = self.__getVersion()
-
    # upload the firmware
-    def upload(self, fw_list, force=False, boot_delay=None, boot_check=False, force_erase=False):
-        self.force_erase = force_erase
+    def upload(self, fw_list, force=False, boot_delay=None, boot_check=False):
        # select correct binary
        found_suitable_firmware = False
        for file in fw_list:
@@ -637,8 +611,6 @@ class uploader:
        print("Loaded firmware for board id: %s,%s size: %d bytes (%.2f%%) " % (fw.property('board_id'), fw.property('board_revision'), fw.property('image_size'), percent))
        print()

-        print(f"Bootloader version: {self.version}")
-
        # Make sure we are doing the right thing
        start = _time()
        if self.board_type != fw.property('board_id'):
@@ -668,14 +640,14 @@ class uploader:
            self.otp_coa = self.otp[32:160]
            # show user:
            try:
-                print("Sn: ", end='')
+                print("sn: ", end='')
                for byte in range(0, 12, 4):
                    x = self.__getSN(byte)
                    x = x[::-1]  # reverse the bytes
                    self.sn = self.sn + x
                    print(binascii.hexlify(x).decode('Latin-1'), end='')  # show user
                print('')
-                print("Chip: %08x" % self.__getCHIP())
+                print("chip: %08x" % self.__getCHIP())

                otp_id = self.otp_id.decode('Latin-1')
                if ("PX4" in otp_id):
@@ -685,19 +657,17 @@ class uploader:
                    print("OTP pid: " + binascii.hexlify(self.otp_pid).decode('Latin-1'))
                    print("OTP coa: " + binascii.b2a_base64(self.otp_coa).decode('Latin-1'))

-            except Exception as e:
+            except Exception:
                # ignore bad character encodings
-                print(f"Exception ignored: {e}")
                pass

        # Silicon errata check was added in v5
        if (self.bl_rev >= 5):
            des = self.__getCHIPDes()
            if (len(des) == 2):
-                family, revision = des
-                print(f"Family: {family.decode()}")
-                print(f"Revision: {revision.decode()}")
-                print(f"Flash: {self.fw_maxsize} bytes")
+                print("family: %s" % des[0])
+                print("revision: %s" % des[1])
+                print("flash: %d bytes" % self.fw_maxsize)

                # Prevent uploads where the maximum image size of the board config is smaller than the flash
                # of the board. This is a hint the user chose the wrong config and will lack features
@@ -708,7 +678,8 @@ class uploader:
                # https://github.com/PX4/Firmware/blob/master/src/drivers/boards/common/stm32/board_mcu_version.c#L125-L144

                if self.fw_maxsize > fw.property('image_maxsize') and not force:
-                    raise RuntimeError(f"Board can accept larger flash images ({self.fw_maxsize} bytes) than board config ({fw.property('image_maxsize')} bytes). Please use the correct board configuration to avoid lacking critical functionality.")
+                    raise RuntimeError("Board can accept larger flash images (%u bytes) than board config (%u bytes). Please use the correct board configuration to avoid lacking critical functionality."
+                                       % (self.fw_maxsize, fw.property('image_maxsize')))
        else:
            # If we're still on bootloader v4 on a Pixhawk, we don't know if we
            # have the silicon errata and therefore need to flash px4_fmu-v2
@@ -809,13 +780,16 @@ class uploader:


 def main():
+    # Python2 is EOL
+    if not runningPython3:
+        raise RuntimeError("Python 2 is not supported. Please try again using Python 3.")
+
    # Parse commandline arguments
    parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.")
    parser.add_argument('--port', action="store", required=True, help="Comma-separated list of serial port(s) to which the FMU may be attached")
    parser.add_argument('--baud-bootloader', action="store", type=int, default=115200, help="Baud rate of the serial port (default is 115200) when communicating with bootloader, only required for true serial ports.")
    parser.add_argument('--baud-flightstack', action="store", default="57600", help="Comma-separated list of baud rate of the serial port (default is 57600) when communicating with flight stack (Mavlink or NSH), only required for true serial ports.")
    parser.add_argument('--force', action='store_true', default=False, help='Override board type check, or silicon errata checks and continue loading')
-    parser.add_argument('--force-erase', action="store_true", help="Do not perform the blank check, always erase every sector of the application space")
    parser.add_argument('--boot-delay', type=int, default=None, help='minimum boot delay to store in flash')
    parser.add_argument('--use-protocol-splitter-format', action='store_true', help='use protocol splitter format for reboot')
    parser.add_argument('firmware', action="store", nargs='+', help="Firmware file(s)")
@@ -893,10 +867,9 @@ def main():
                        # Windows, don't open POSIX ports
                        if "/" not in port:
                            up = uploader(port, args.baud_bootloader, baud_flightstack)
-                except Exception as e:
+                except Exception:
                    # open failed, rate-limit our attempts
                    time.sleep(0.05)
-                    print(f"Exception ignored: {e}")

                    # and loop to the next port
                    continue
@@ -911,10 +884,10 @@ def main():
                        up.identify()
                        found_bootloader = True
                        print()
-                        print(f"Found board id: {up.board_type},{up.board_rev} bootloader protocol revision {up.bl_rev} on {port}")
+                        print("Found board id: %s,%s bootloader version: %s on %s" % (up.board_type, up.board_rev, up.bl_rev, port))
                        break

-                    except (RuntimeError, serial.SerialException):
+                    except Exception:

                        if not up.send_reboot(args.use_protocol_splitter_format):
                            break
@@ -934,14 +907,14 @@ def main():

                try:
                    # ok, we have a bootloader, try flashing it
-                    up.upload(args.firmware, force=args.force, boot_delay=args.boot_delay, force_erase=args.force_erase)
+                    up.upload(args.firmware, force=args.force, boot_delay=args.boot_delay)

                    # if we made this far without raising exceptions, the upload was successful
                    successful = True

-                except RuntimeError as e:
+                except RuntimeError as ex:
                    # print the error
-                    print(f"\n\nError: {e}")
+                    print("\nERROR: %s" % ex.args)

                except FirmwareNotSuitableException:
                    unsuitable_board = True
@@ -12,7 +12,6 @@ CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
@@ -6,6 +6,7 @@
 param set-default CBRK_IO_SAFETY 0
 param set-default CANNODE_SUB_MBD 1
 param set-default CANNODE_SUB_RTCM 1
+param set-default GPS_1_GNSS 63
 param set-default MBE_ENABLE 1
 param set-default SENS_IMU_CLPNOTI 0

@@ -47,7 +47,7 @@
 #define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)

 /* Safety LED */
-#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)

 /* Tone alarm output. */
 #define TONE_ALARM_TIMER             2    /* timer 2 */
@@ -8,7 +8,6 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
@@ -8,9 +8,7 @@ CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
-CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
@@ -32,10 +32,19 @@ then
 	param set-default SENS_TEMP_ID 2490378
 fi

+param set-default EKF2_BARO_DELAY 39
+param set-default EKF2_BARO_NOISE 0.9
+param set-default EKF2_HGT_REF 0
+param set-default EKF2_MAG_DELAY 60
+param set-default EKF2_MAG_NOISE 0.06
 param set-default EKF2_MULTI_IMU 2
 param set-default EKF2_OF_CTRL 1
+param set-default EKF2_OF_DELAY 28
 param set-default EKF2_OF_N_MIN 0.05
 param set-default EKF2_RNG_A_HMAX 25
+param set-default EKF2_RNG_DELAY 105
+param set-default EKF2_RNG_NOISE 0.03
 param set-default EKF2_RNG_QLTY_T 0.1
+param set-default EKF2_RNG_SFE 0.03

 param set-default SENS_FLOW_RATE 150
@@ -2,7 +2,6 @@ CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m7"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_MAIERTEK_MPC2520=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
@@ -3,7 +3,6 @@ CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_LPS25H=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_GPS=y
@@ -4,7 +4,6 @@ CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
 CONFIG_DRIVERS_BAROMETER_BMP388=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L1X=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088_I2C=y
@@ -7,14 +7,12 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_COMMON_BAROMETERS=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
@@ -6,7 +6,6 @@ CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
@@ -11,11 +11,9 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -194,12 +194,6 @@

 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -11,11 +11,9 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20649=y
@@ -195,12 +195,6 @@

 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -12,7 +12,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -8,7 +8,6 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -7,7 +7,6 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
@@ -12,7 +12,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -97,9 +97,9 @@
 #define INTERFACE_USART_CONFIG         "/dev/ttyS5,57600"
 #define BOOT_DELAY_ADDRESS             0x000001a0
 #define BOARD_TYPE                     1013
-#define BOARD_FLASH_SECTORS            (14)
-#define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE 	       (1 * 128 * 1024)
+#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
+#define BOARD_FLASH_SECTORS            (15)
+#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)

 #define OSC_FREQ                       16

@@ -11,7 +11,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -11,7 +11,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,7 +9,6 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
@@ -9,7 +9,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,7 +9,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,7 +9,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -11,7 +11,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -7,7 +7,6 @@ CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -7,7 +7,6 @@ CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
@@ -8,7 +8,6 @@ CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -12,7 +12,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -12,7 +12,6 @@ CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
@@ -12,7 +12,6 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -6,5 +6,4 @@
 param set-default BAT1_V_DIV 10.1
 param set-default BAT1_A_PER_V 17

-param set-default GPS_2_CONFIG 202
 param set-default TEL_FRSKY_CONFIG 103
@@ -197,12 +197,6 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -10,7 +10,6 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,7 +9,6 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,7 +10,6 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -197,12 +197,6 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -10,7 +10,6 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -196,12 +196,6 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -9,11 +9,9 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI085=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
@@ -196,12 +196,6 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -9,7 +9,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,7 +10,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -11,7 +11,6 @@ CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
@@ -11,7 +11,6 @@ CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
@@ -7,7 +7,6 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -9,8 +9,6 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_MS5611=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_ST_L3GD20=y
@@ -11,11 +11,9 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
@@ -11,11 +11,9 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
@@ -12,7 +12,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,7 +10,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -6,7 +6,6 @@ CONFIG_COMMON_OPTICAL_FLOW=n
 CONFIG_COMMON_TELEMETRY=n
 CONFIG_DRIVERS_CAMERA_CAPTURE=n
 CONFIG_DRIVERS_CAMERA_TRIGGER=n
-CONFIG_DRIVERS_CDCACM_AUTOSTART=n
 CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_PWM_INPUT=n
@@ -14,7 +14,6 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,11 +10,9 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
@@ -246,12 +246,6 @@

 #define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* ADC 1 2 3 clock source */

 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2
@@ -11,7 +11,6 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -14,11 +14,9 @@ CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
 CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16470=y
@@ -250,12 +250,6 @@

 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2

-/* UART clock selection */
-/* reset to default to overwrite any changes done by any bootloader */
-
-#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
-#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
-
 /* FDCAN 1 2 clock source */

 #define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
@@ -13,11 +13,9 @@ CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
 CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16470=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
@@ -35,7 +33,6 @@ CONFIG_DRIVERS_OSD_MSP_OSD=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_POWER_MONITOR_INA228=y
 CONFIG_DRIVERS_POWER_MONITOR_INA238=y
-CONFIG_DRIVERS_POWER_MONITOR_PM_SELECTOR_AUTERION=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_PX4IO=y
 CONFIG_DRIVERS_RC_INPUT=y
@@ -87,7 +84,6 @@ CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2C_LAUNCHER=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_IO_BYPASS_CONTROL=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
@@ -12,11 +12,9 @@ param set-default MAV_2_RATE 100000
 param set-default MAV_2_REMOTE_PRT 14550
 param set-default MAV_2_UDP_PRT 14550

-# By disabling all 3 INA modules, we use the
-# i2c_launcher instead.
 param set-default SENS_EN_INA238 0
 param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
+param set-default SENS_EN_INA226 1

 safety_button start

@@ -17,7 +17,6 @@
 #------------------------------------------------------------------------------

 set HAVE_PM2 yes
-set INA_CONFIGURED no

 if mft query -q -k MFT -s MFT_PM2 -v 0
 then
@@ -40,8 +39,6 @@ then
 	then
 		ina226 -X -b 2 -t 2 -k start
 	fi
-
-	set INA_CONFIGURED yes
 fi

 if param compare SENS_EN_INA228 1
@@ -52,8 +49,6 @@ then
 	then
 		ina228 -X -b 2 -t 2 -k start
 	fi
-
-	set INA_CONFIGURED yes
 fi

 if param compare SENS_EN_INA238 1
@@ -64,25 +59,6 @@ then
 	then
 		ina238 -X -b 2 -t 2 -k start
 	fi
-
-	set INA_CONFIGURED yes
-fi
-
-#Start Auterion Power Module selector for Skynode boards
-if ver hwbasecmp 009 010
-then
-	pm_selector_auterion start
-else
-	if [ $INA_CONFIGURED = no ]
-	then
-		# INA226, INA228, INA238 auto-start
-		i2c_launcher start -b 1
-		if [ $HAVE_PM2 = yes ]
-		then
-			i2c_launcher start -b 2
-		fi
-	fi
-fi
 fi

 # Internal SPI bus ICM42686p (hard-mounted)
@@ -112,5 +88,4 @@ fi

 bmp388 -X -b 2 start

-unset INA_CONFIGURED
 unset HAVE_PM2
@@ -28,7 +28,6 @@ CONFIG_ARMV7M_ITCM=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU=y
-CONFIG_ARM_MPU_RESET=y
 CONFIG_BOARDCTL=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_ASSERT_RESET_VALUE=0
@@ -52,7 +52,6 @@
 #define IMXRT_IPG_PODF_DIVIDER 5
 #define BOARD_GPT_FREQUENCY  24000000
 #define BOARD_XTAL_FREQUENCY 24000000
-#define BOARD_FLEXIO_PREQ    108000000

 /* SDIO *********************************************************************/

@@ -29,7 +29,6 @@ CONFIG_ARMV7M_ITCM=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU=y
-CONFIG_ARM_MPU_RESET=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BOARD_BOOTLOADER_FIXUP=y
@@ -47,10 +46,7 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3643
 CONFIG_CDCACM_VENDORSTR="Dronecode Project, Inc."
-CONFIG_DEBUG_ERROR=y
-CONFIG_DEBUG_FEATURES=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
-CONFIG_DEBUG_MEMFAULT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_TCBINFO=y
 CONFIG_DEV_FIFO_SIZE=0
@@ -261,6 +257,7 @@ CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=2032
+CONFIG_SCHED_WAITPID=y
 CONFIG_SDIO_BLOCKSETUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -279,7 +276,6 @@ CONFIG_SYSTEM_CLE=y
 CONFIG_SYSTEM_DHCPC_RENEW=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_SYSTEM_PING=y
-CONFIG_SYSTEM_SYSTEM=y
 CONFIG_TASK_NAME_SIZE=24
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
@@ -455,7 +455,6 @@
 #define RC_SERIAL_SINGLEWIRE            1 // Suport Single wire wiring
 #define RC_SERIAL_SWAP_RXTX             1 // Set Swap (but not supported in HW) to use Single wire
 #define RC_SERIAL_SWAP_USING_SINGLEWIRE 1 // Set to use Single wire swap as HW does not support swap
-#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT

 /* FLEXSPI4 */

@@ -114,11 +114,11 @@ const struct clock_configuration_s g_initial_clkconfig = {
 			.div           = 1,
 			.mux           = ACMP_CLK_ROOT_OSC_RC_48M_DIV2,
 		},
-		.flexio1_clk_root = /* 432 / 4 = 108Mhz */
+		.flexio1_clk_root =
 		{
 			.enable        = 1,
-			.div           = 4,
-			.mux           = FLEXIO1_CLK_ROOT_SYS_PLL2_PFD3,
+			.div           = 2,
+			.mux           = FLEXIO1_CLK_ROOT_SYS_PLL3_DIV2,
 		},
 		.flexio2_clk_root =
 		{
@@ -492,9 +492,9 @@ const struct clock_configuration_s g_initial_clkconfig = {
 		.mfd             = 268435455,
 		.ss_enable       = 0,
 		.pfd0            = 27, /* (528 * 18) / 27 = 352 MHz */
-		.pfd1            = 16, /* (528 * 18) / 16 = 594 MHz */
-		.pfd2            = 24, /* (528 * 18) / 24 = 396 MHz */
-		.pfd3            = 22, /* (528 * 18) / 22 = 216 MHz */
+		.pfd1            = 16, /* (528 * 16) / 16 = 594 MHz */
+		.pfd2            = 24, /* (528 * 24) / 27 = 396 MHz */
+		.pfd3            = 32, /* (528 * 32) / 27 = 297 MHz */
 	},
 	.sys_pll3 =
 	{
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Matthias Grob	1d5d96e8f9	mavlink: return unsupported frame result when that's the case	2024-05-02 17:32:37 +02:00
Matthias Grob	3b21f3999f	mavlink: spacing, naming of command frame handling	2024-05-02 17:30:59 +02:00
Matthias Grob	6dbf39be7c	Update MAVLink to contain _INT frame deprecation warning	2024-05-02 17:19:31 +02:00
Daniel Agar	3bd14fcb16	mavlink: COMMAND_INT receiver reject unsupported MAV_FRAMEs	2024-05-02 16:49:37 +02:00
Daniel Agar	ed35155b50	vehicle_command: add initial frame support (GLOBAL & GLOBAL_RELATIVE_ALT)	2024-05-02 16:49:37 +02:00
David Sidrane	c13e3bae12	px4_fmu-v6xrt:Support_MMCSD_MULTIBLOCK with preflight	2024-05-01 20:45:42 -04:00
David Sidrane	a3e1dcce4b	NuttX with imxrt_sd-preflight backport	2024-05-01 20:45:42 -04:00
Daniel Agar	33234f4dc0	drivers/ins/vectornav: add missing sensor_gps velocity magnitude	2024-05-01 20:40:28 -04:00
Julian Oes	e79993a316	gps: split enum after rebase Signed-off-by: Julian Oes <julian@oes.ch>	2024-05-01 14:42:58 -04:00
alexklimaj	b308c4fbcc	boards: ark rtk gps safety led open drain	2024-05-01 14:42:58 -04:00
alexklimaj	c90ccabbe0	gps: add ZED-F9P-15B	2024-05-01 14:42:58 -04:00
alexklimaj	2498ce6a5c	boards: add iis2mdc mag to ark pi6x	2024-04-30 21:26:42 -04:00
alexklimaj	67b39314bf	boards: update ark_pi6x EKF delays	2024-04-30 21:26:42 -04:00
Daniel Agar	b6da0b141d	ekf2: GPS yaw only invalidate yaw_align if stopping due to fusion failure	2024-04-29 21:04:21 -04:00
Beat Küng	547209e1dc	libevents: update submodule And remove obsolete libevents_definitions.h	2024-04-29 07:22:40 -07:00
bresch	9dc7719d4a	ekf2: Only reset to GNSS heading if necessary When North-East (e.g.: GNSS pos/vel) aiding is active, the heading estimate is constrained and consistent with the vel/pos aiding. Reset to GNSS heading should only occur if no N-E aiding is active or if the filter is not yes aligned. Otherwise, just wait for the consistency check to pass again (will pass at some point if the heading uncertainty of the filter is getting too high).	2024-04-29 07:22:01 -07:00
Jukka Laitinen	6435e25929	commander: Use PX4_STACK_ADJUSTED to increase stack for 64-bit targets Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>	2024-04-29 08:11:54 +02:00
Hamish Willee	902712b97f	LogMessage.msg - expand out descriptive string (#23054 )	2024-04-29 14:02:09 +12:00
Peter van der Perk	500332e424	imxrt: flexpwm remove 1:1 mapping requirement	2024-04-27 07:57:32 -04:00
Silvan Fuhrer	34cb69898e	FW Position Controller: fix Altitude mode without valid z reference (e.g. no GPS) Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-04-26 10:44:40 +02:00
oravla5	f91103af6e	boards: removed CONFIG_SYSTEMCMDS_REFLECT from Sky-Drones AIRLink board support	2024-04-26 09:42:06 +02:00
oravla5	9d6ac0b87a	mavlink: Added MAV_{i}_HL_FREQ parameter	2024-04-26 09:42:06 +02:00
oravla5	2b2e1c9521	mavlink: Added parsing of CLI option to configure HL frequency	2024-04-26 09:42:06 +02:00
oravla5	e7b4c5903f	px4_cli: Added px4_get_parameter_value function overload for float type	2024-04-26 09:42:06 +02:00
bresch	7cefc3172a	estimatorCheck: get param only if handle is valid	2024-04-25 14:48:23 -04:00
murata,katsutoshi	ba448fb549	MC Auto: add fixed yaw mode	2024-04-25 13:53:05 +02:00
oravla5	98b23e41f7	mavlink: fixed compilation error after var renaming	2024-04-25 08:23:32 +02:00
oravla5	283ae60a15	telemetry: removed iridium driver	2024-04-25 08:23:32 +02:00
oravla5	3cb48feb61	high_latency_stream: minor PR fix	2024-04-25 08:23:32 +02:00
oravla5	bf1266af11	mavlink: added back gimbal v1 protocol command	2024-04-25 08:23:32 +02:00
oravla5	03652beef8	commander: fixed format	2024-04-25 08:23:32 +02:00
oravla5	d0e7f2c368	high_latency_stream: heading taken from vehicle_attitude topic	2024-04-25 08:23:32 +02:00
Igor Mišić	d0532f45b2	telemetry: enable iridium	2024-04-25 08:23:32 +02:00
Igor Mišić	61ca65d863	mavlink: use high_latency_data_link_lost as backup to normal data_link	2024-04-25 08:23:32 +02:00
Igor Mišić	4f8de500af	iridiumsbd: update logic for detecting if the modem is not responsive	2024-04-25 08:23:32 +02:00
Igor Mišić	5be0adc779	mavlink: don't send command ACK for internal commands over Iridium	2024-04-25 08:23:32 +02:00
Igor Mišić	29af189cd0	mavlink: don't send events over Iridium	2024-04-25 08:23:32 +02:00
Igor Mišić	208909d471	mavlink: use high_latency_data_link_lost as backup to normal data_link	2024-04-25 08:23:32 +02:00
Igor Mišić	de23c10b68	commander: improve handling high latency link lost/regain	2024-04-25 08:23:32 +02:00
Igor Mišić	d3b853a7f9	mavlink: fix handling of transmission enable/disable Co-authored-by: RomanBapst <bapstroman@gmail.com>	2024-04-25 08:23:32 +02:00
Igor Mišić	760bcdec2f	high_latency_stream: fixed bug where fields were not updating - topic update was checked twice in the same loop and thus the second time the topic would never indicate to have updated Co-authored-by: RomanBapst <bapstroman@gmail.com>	2024-04-25 08:23:32 +02:00
Igor Mišić	df2cc4af05	commander: fix check for availability of high latency link Signed-off-by: RomanBapst <bapstroman@gmail.com>	2024-04-25 08:23:32 +02:00
Beat Küng	f543951e10	commander: set correct health component when reporting errors	2024-04-24 16:06:32 -04:00
Jacob Dahl	69e082c83d	drivers/magnetometer: new ST IIS2MDC Magnetometer driver	2024-04-24 13:01:18 -07:00
dirksavage88	6a3e57d428	Shift vertical orientation above scaling yaw operation, cp angle sign change Signed-off-by: dirksavage88 <dirksavage88@gmail.com>	2024-04-24 15:58:12 -04:00
dirksavage88	0f6f4c5b07	fix to orientation offsets for scaled yaw, removed unused param Signed-off-by: dirksavage88 <dirksavage88@gmail.com>	2024-04-24 15:58:12 -04:00
Thomas Frans	65c7e034dc	VSCode: add EditorConfig extension to recommended and devcontainer.json	2024-04-24 15:52:23 -04:00
Daniel Agar	eb59bb9de9	simulation/gz_bridge: eliminate implicit float conversion	2024-04-24 15:51:30 -04:00
bresch	b508df39a2	imu consistency: don't scale param threshold	2024-04-24 15:51:07 -04:00
bresch	8bf1cf0b15	ekf2_params: reduce "short" description	2024-04-24 15:09:57 -04:00
Silvan Fuhrer	97191bd60f	autopilot_tester: for mission end timeout check take speed factor into account And increase the (simulation time) timeouts. Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-04-23 16:37:31 +02:00
Silvan Fuhrer	818e318334	autopilot_tester: reduce mission distance for wind world Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-04-23 16:37:31 +02:00
Silvan Fuhrer	59232c27ae	autopilot_tester: use normal VTOL mission for airspeed blockage test Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-04-23 16:37:31 +02:00
fury1895	2683128205	PM Selector Auterion: remove INA226_SHUNT value reset (skynode only)	2024-04-23 16:02:35 +02:00