drivers/rc_input: cleanup and simplify data processing per type

- don't store data in class
drivers/rc_input: poll file descriptor to minimize latency
2026-05-24 12:47:36 +08:00 · 2022-02-09 17:11:11 -05:00 · 2022-02-09 16:48:08 -05:00 · 2022-02-09 13:11:52 -05:00 · 2022-02-09 13:11:52 -05:00 · 2022-02-09 11:39:47 -05:00
844 changed files with 33994 additions and 22990 deletions
@@ -60,6 +60,8 @@ pipeline {
                     "holybro_kakutef7_default",
                     "holybro_pix32v5_default",
                     "matek_h743-slim",
+                     "matek_gnss-m9n-f4_canbootloader",
+                     "matek_gnss-m9n-f4_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
@@ -170,7 +172,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
            try {
              sh('export')
              checkout(scm)
-              sh('make distclean')
+              sh('make distclean; git clean -ff -x -d .')
              sh('git fetch --tags')
              sh('ccache -s')
              sh('make ' + target)
@@ -187,7 +189,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
              throw (exc)
            }
            finally {
-              sh('make distclean')
+              sh('make distclean; git clean -ff -x -d .')
            }
          }
        }
@@ -25,7 +25,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -74,7 +74,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
                }
              }
            } // stage test
@@ -99,7 +100,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -143,7 +144,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
                }
              }
            } // stage test
@@ -168,7 +170,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -212,7 +214,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
                }
              }
            } // stage test
@@ -237,7 +240,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -280,7 +283,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
                }
              }
            } // stage test
@@ -305,7 +309,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -349,7 +353,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
                }
              }
            } // stage test
@@ -374,7 +379,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -407,7 +412,7 @@ pipeline {

                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'

                    // test dataman
@@ -426,7 +431,6 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -439,7 +443,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
                }
              }
            } // stage test
@@ -464,7 +469,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -508,7 +513,6 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -521,7 +525,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
                }
              }
            } // stage test
@@ -546,7 +551,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -590,7 +595,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
                }
              }
            } // stage test
@@ -615,7 +621,7 @@ pipeline {
              }
              post {
                always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                }
              }
            } // stage build
@@ -659,7 +665,8 @@ pipeline {
              }
              post {
                always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
+                  sh 'cat /tmp/pyserial_spy_file.txt || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
                }
              }
            } // stage test
@@ -685,7 +692,7 @@ void checkoutSCM() {
  retry(3) {
    checkout scm
    sh 'export'
-    sh 'make distclean'
+    sh 'make distclean; git clean -ff -x -d .'
    sh 'git fetch --tags'
    sh 'ccache -z'
  }
@@ -718,34 +725,44 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'

  // run logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
  // status commands
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
@@ -757,12 +774,12 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
  // stop logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
 }

 void resetParameters() {
@@ -780,6 +797,8 @@ void runTests() {

  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
@@ -819,30 +838,13 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
-
-  // test rebooting multiple times
-  resetParameters()
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/microsd/parameters_backup.bson" || true'
+  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
 }

 void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'

  // these are for casually inspecting the system, output failure doesn't matter
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener actuator_armed" || true'
@@ -936,10 +938,6 @@ void printTopics() {
 }

 void resetBoard() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-
  resetParameters()

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
@@ -949,29 +947,4 @@ void resetBoard() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-  // check SD card
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
-  // format
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman stop" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "umount /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mkfatfs -F 32 /dev/mmcsd0" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount -t vfat /dev/mmcsd0 /fs/microsd" || true'
-  // check SD card
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
-
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
 }
@@ -0,0 +1,7 @@
+FROM gcr.io/oss-fuzz-base/base-builder:v1
+COPY . $SRC/PX4-Autopilot
+RUN apt-get install -y libjpeg8-dev zlib1g-dev
+RUN pip3 install --upgrade pip
+RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
+WORKDIR $SRC/PX4-Autopilot
+COPY ./.clusterfuzzlite/build.sh $SRC/
@@ -0,0 +1,4 @@
+#!/usr/bin/env bash -eu
+
+PX4_FUZZ=1 make px4_sitl
+cp build/px4_sitl_default/bin/px4 $OUT/px4
@@ -0,0 +1 @@
+language: c++
@@ -0,0 +1,34 @@
+name: ClusterFuzzLite batch fuzzing
+on:
+  schedule:
+    - cron: '0 6 * * *'  # UTC 6am every day.
+permissions: read-all
+jobs:
+  BatchFuzzing:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        sanitizer:
+        - address
+        - undefined
+        - memory
+    steps:
+    - name: Build Fuzzers (${{ matrix.sanitizer }})
+      id: build
+      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
+      with:
+        sanitizer: ${{ matrix.sanitizer }}
+    - name: Run Fuzzers (${{ matrix.sanitizer }})
+      id: run
+      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        fuzz-seconds: 1800 # 30 mins
+        mode: 'batch'
+        sanitizer: ${{ matrix.sanitizer }}
+        # Optional but recommended: For storing certain artifacts from fuzzing.
+        # See later section on "Git repo for storage".
+        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
+        # storage-repo-branch: main   # Optional. Defaults to "main"
+        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".
@@ -33,8 +33,10 @@ jobs:
          holybro_can-gps-v1,
          holybro_durandal-v1,
          holybro_kakutef7,
+          holybro_kakuteh7,
          holybro_pix32v5,
          matek_h743-slim,
+          matek_gnss-m9n-f4,
          modalai_fc-v1,
          modalai_fc-v2,
          mro_ctrl-zero-f7,
@@ -196,6 +196,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: matek_h743-slim_default
+    matek_gnss-m9n-f4_canbootloader:
+      short: matek_gnss-m9n-f4_canbootloader
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_m9nf4can_canbootloader
+    matek_gnss-m9n-f4_default:
+      short: matek_gnss-m9n-f4_default
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_gnss-m9n-f4_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -125,6 +125,11 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 FULL_DOCS "List of all PX4 module libraries"
                 )

+define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
+                 BRIEF_DOCS "PX4 kernel side module libs"
+                 FULL_DOCS "List of all PX4 kernel module libraries"
+                 )
+
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                 BRIEF_DOCS "PX4 module paths"
                 FULL_DOCS "List of paths to all PX4 modules"
@@ -142,6 +147,7 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")

 include(px4_add_module)
 set(config_module_list)
+set(config_kernel_list)

 # Find Python
 # If using catkin, Python 2 is found since it points
@@ -88,7 +88,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make airframe_metadata'
            dir('build/px4_sitl_default/docs') {
@@ -98,7 +98,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -108,7 +108,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make parameters_metadata'
            dir('build/px4_sitl_default/docs') {
@@ -118,7 +118,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -128,7 +128,7 @@ pipeline {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make module_documentation'
            dir('build/px4_sitl_default/docs') {
@@ -138,7 +138,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -156,7 +156,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -170,7 +170,7 @@ pipeline {
          }
          steps {
            sh 'export'
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
            sh 'git fetch --all --tags'
            sh 'make uorb_graphs'
            dir('Tools/uorb_graph') {
@@ -180,7 +180,7 @@ pipeline {
          }
          post {
            always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
            }
          }
        }
@@ -261,7 +261,7 @@ pipeline {
          steps {
            sh('export')
            sh('git fetch --all --tags')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
            sh('make px4_sitl_rtps')
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/micrortps_agent.git -b ${BRANCH_NAME}")
@@ -290,7 +290,7 @@ pipeline {
          }
          steps {
            sh('export')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
              // 'master' branch
@@ -319,7 +319,7 @@ pipeline {
          }
          steps {
            sh('export')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
              // deploy uORB RTPS ID map
@@ -118,6 +118,11 @@ config BOARD_CRYPTO
    help
        Enable PX4 Crypto Support. Select the implementation under drivers

+config BOARD_PROTECTED
+    bool "Memory protection"
+    help
+        Enable memory protection via MPU/MMU
+
 menu "Serial ports"

    config BOARD_SERIAL_URT6
@@ -1,6 +1,6 @@
 BSD 3-Clause License

-Copyright (c) 2012 - 2021, PX4 Development Team
+Copyright (c) 2012 - 2022, PX4 Development Team
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
@@ -158,6 +158,11 @@ else
 		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif

+	# Fuzz Testing
+	ifdef PX4_FUZZ
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
+	endif
+
 endif

 # Pick up specific Python path if set
@@ -482,7 +487,9 @@ shellcheck_all:
 	@make px4_fmu-v5_default shellcheck

 validate_module_configs:
-	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f -not -path "$(SRC_DIR)/src/lib/mixer_module/*" -print0 | xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
+	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
+	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" -not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
+	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml

 # Cleanup
 # --------------------------------------------------------------------
@@ -14,19 +14,19 @@ param set-default SYS_CTRL_ALLOC 1

 param set-default CA_AIRFRAME 0

-param set-default CA_MC_R_COUNT 4
-param set-default CA_MC_R0_PX 0.1515
-param set-default CA_MC_R0_PY 0.245
-param set-default CA_MC_R0_KM 0.05
-param set-default CA_MC_R1_PX -0.1515
-param set-default CA_MC_R1_PY -0.1875
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.1515
-param set-default CA_MC_R2_PY -0.245
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.1515
-param set-default CA_MC_R3_PY 0.1875
-param set-default CA_MC_R3_KM -0.05
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -8,6 +8,63 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-set PWM_OUT 12345678
-set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix
-set MIXER custom
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 7
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 255
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+param set-default PWM_MAIN_FUNC7 107
+param set-default PWM_MAIN_FUNC8 108
+
+set MIXER skip
+
@@ -43,5 +43,32 @@ param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1

+#param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom
@@ -44,6 +44,8 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

+param set-default FW_USE_NPFG 1
+
 param set-default RWTO_TKOFF 1

 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
@@ -7,6 +7,39 @@

 . ${R}etc/init.d/rc.vtol_defaults

+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 2
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
@@ -7,14 +7,48 @@

 . ${R}etc/init.d/rc.vtol_defaults

+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 4
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 2
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y 0.5
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 0
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_REV 96 # invert both elevons
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_I 0.2
-param set-default FW_PR_P 0.3
+param set-default FW_PR_P 0.2
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_P 0.3
+param set-default FW_RR_P 0.2
 param set-default FW_THR_CRUISE 0.33
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
@@ -36,6 +70,8 @@ param set-default MPC_XY_VEL_D_ACC 0.1
 param set-default NAV_ACC_RAD 5
 param set-default NAV_LOITER_RAD 80

+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.5
 param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_F_TRANS_THR 0.7
 param set-default VT_TYPE 0
@@ -7,6 +7,52 @@

 . ${R}etc/init.d/rc.vtol_defaults

+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_TILT 2
+param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_TILT 4
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_TL0_CT 0
+param set-default CA_SV_TL1_CT 0
+param set-default CA_SV_TL2_CT 0
+param set-default CA_SV_TL3_CT 0
+param set-default CA_SV_TL_COUNT 4
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 204
+param set-default PWM_MAIN_FUNC6 205
+param set-default PWM_MAIN_FUNC7 206
+param set-default PWM_MAIN_FUNC8 207
+param set-default PWM_MAIN_FUNC9 201
+param set-default PWM_MAIN_FUNC10 202
+param set-default PWM_MAIN_FUNC11 203
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
@@ -28,6 +28,15 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 5
+
+param set-default CA_R_REV 1
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 201
+param set-default PWM_MAIN_FUNC6 101
+param set-default PWM_MAIN_FUNC7 101
+
 set MAV_TYPE 10

-set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
+set MIXER_FILE skip
@@ -28,6 +28,15 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 6
+
+param set-default CA_R_REV 3
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 101
+param set-default PWM_MAIN_FUNC6 102
+param set-default PWM_MAIN_FUNC7 102
+
 set MAV_TYPE 10

-set MIXER_FILE etc/mixers-sitl/rover_diff_sitl.main.mix
+set MIXER_FILE skip
@@ -28,6 +28,25 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 9
+
+param set-default CA_ROTOR_COUNT 2
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX -2
+param set-default CA_ROTOR0_PY -1
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX -2
+param set-default CA_ROTOR1_PY 1
+param set-default CA_R_REV 3
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+
 set MAV_TYPE 11

-set MIXER_FILE etc/mixers-sitl/boat_sitl.main.mix
+set MIXER skip
@@ -11,5 +11,31 @@

 . ${R}etc/init.d/rc.airship_defaults

-set MIXER cloudship
-set PWM_OUT 1234
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 9
+
+param set-default CA_ROTOR_COUNT 3
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000
+
+param set-default CA_SV_CS_COUNT 1
+param set-default CA_SV_CS0_TRQ_P 1.0000
+
+param set-default CA_R_REV 7
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 201
+param set-default PWM_MAIN_FUNC4 103
+
+set MIXER skip
@@ -30,26 +30,26 @@ param set-default MNT_MODE_IN 0
 param set-default MAV_PROTO_VER 2

 param set-default CA_AIRFRAME 0
-param set-default CA_MC_R_COUNT 6
+param set-default CA_ROTOR_COUNT 6

-param set-default CA_MC_R0_PX 0.0
-param set-default CA_MC_R0_PY 1.0
-param set-default CA_MC_R0_KM -0.05
-param set-default CA_MC_R1_PX 0.0
-param set-default CA_MC_R1_PY -1.0
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.866025
-param set-default CA_MC_R2_PY -0.5
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.866025
-param set-default CA_MC_R3_PY 0.5
-param set-default CA_MC_R3_KM 0.05
-param set-default CA_MC_R4_PX 0.866025
-param set-default CA_MC_R4_PY 0.5
-param set-default CA_MC_R4_KM 0.05
-param set-default CA_MC_R5_PX -0.866025
-param set-default CA_MC_R5_PY -0.5
-param set-default CA_MC_R5_KM -0.05
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.866025
+param set-default CA_ROTOR2_PY -0.5
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.866025
+param set-default CA_ROTOR3_PY 0.5
+param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR4_PX 0.866025
+param set-default CA_ROTOR4_PY 0.5
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR5_PX -0.866025
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR5_KM -0.05

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -10,7 +10,7 @@ fi

 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
 fi

 publisher_rules_file="orb_publisher.rules"
@@ -21,6 +21,7 @@ ignore_others: false
 EOF

 param set SDLOG_DIRS_MAX 7
+param set SDLOG_PROFILE 3

 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams
@@ -234,7 +234,7 @@ fi

 if param greater -s MNT_MODE_IN -1
 then
-	vmount start
+	gimbal start
 fi

 if param greater -s TRIG_MODE 0
@@ -35,6 +35,6 @@ param set-default MC_YAWRATE_P 0.25
 param set-default MC_YAWRATE_I 0.25

 param set-default BAT1_V_DIV 12.27559
-param set-default BAT1_A_PER_V 15.39103
+param set-default BAT1_A_PER_V 15.391030303103

 set MIXER quad_w
@@ -15,6 +15,8 @@
 set MIXER quad_x
 set PWM_OUT 1234

+param set UAVCAN_ENABLE 0
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2

@@ -15,6 +15,8 @@
 set MIXER AERT
 set PWM_OUT 1234

+param set UAVCAN_ENABLE 0
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2

@@ -38,3 +40,4 @@ param set SIH_IXZ 0.00046
 param set SIH_KDV 0.2

 param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
+param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
@@ -0,0 +1,61 @@
+#!/bin/sh
+#
+# @name SIH Tailsitter Duo
+#
+# @type Simulation
+# @class VTOL
+#
+# @output MAIN1 motor right
+# @output MAIN2 motor left
+# @output MAIN5 elevon right
+# @output MAIN6 elevon left
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set UAVCAN_ENABLE 0
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_MOT_COUNT 2
+param set-default VT_TYPE 0
+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.3
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default MAV_TYPE 19
+set MAV_TYPE 19
+set MIXER vtol_tailsitter_duo_sat
+
+set PWM_OUT 1234
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+param set-default SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0.0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.145
+
+# sih as tailsitter
+param set SIH_VEHICLE_TYPE 2
@@ -24,6 +24,27 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4

 param set-default PWM_AUX_DIS5 950

@@ -13,6 +13,25 @@

 . ${R}etc/init.d/rc.vtol_defaults

+param set-default CA_AIRFRAME 4
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y 0.5
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6

 param set-default PWM_MAIN_MAX 2000

@@ -64,7 +64,6 @@ param set-default FW_BAT_SCALE_EN 1
 param set-default FW_THR_ALT_SCL 2.7
 param set-default FW_T_RLL2THR 20

-param set-default LNDMC_ALT_MAX 9999
 param set-default LNDMC_XY_VEL_MAX 1
 param set-default LNDMC_Z_VEL_MAX 0.7

@@ -31,6 +31,32 @@ param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 24
+
+param set-default CA_AIRFRAME 3
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_TILT 2
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR3_TILT 4
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_TL_COUNT 4
+
 set MAV_TYPE 21

 set MIXER quad_x
@@ -23,6 +23,20 @@ param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0

+param set-default CA_AIRFRAME 4
+param set-default CA_ROTOR_COUNT 2
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y 0.5
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6
+
 param set-default MAV_TYPE 19
 set MAV_TYPE 19
 set MIXER vtol_tailsitter_duo
@@ -23,6 +23,18 @@

 . ${R}etc/init.d/rc.fw_defaults

+param set-default CA_AIRFRAME 1
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+param set-default CA_SV_CS_COUNT 4
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_RATE 50

@@ -21,3 +21,16 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# @name S500 with control allocation
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Silvan Fuhrer
-#
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER skip
-set MIXER_AUX none
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_MC_R_COUNT 4
-param set-default CA_MC_R0_PX 0.177
-param set-default CA_MC_R0_PY 0.177
-param set-default CA_MC_R0_KM 0.05
-param set-default CA_MC_R1_PX -0.177
-param set-default CA_MC_R1_PY -0.177
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.177
-param set-default CA_MC_R2_PY -0.177
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.177
-param set-default CA_MC_R3_PY 0.177
-param set-default CA_MC_R3_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Holybro X500 V2
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Farhang Naderi <farhang.nba@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default IMU_GYRO_CUTOFF 30
+
+param set-default MC_ROLLRATE_P 0.14
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_ROLLRATE_I 0.3
+param set-default MC_PITCHRATE_I 0.3
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCHRATE_D 0.004
@@ -16,8 +16,10 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER none
-set MIXER_AUX none
+# We set the mixer and ESC manually.
+set MIXER skip
+set MIXER_AUX skip
+set MIXER_FILE ""

 # Battery settings
 param set-default BAT_CRIT_THR 0.20
@@ -33,12 +35,13 @@ param set-default CBRK_SUPPLY_CHK 894281

 param set-default COM_DISARM_LAND 0.1
 param set-default COM_DISARM_PRFLT 3
-param set-default COM_FLTMODE1 -1
+param set-default COM_DL_LOSS_T 10
+param set-default COM_FLTMODE1  2
 param set-default COM_FLTMODE2 -1
 param set-default COM_FLTMODE3 -1
-param set-default COM_FLTMODE4  2
+param set-default COM_FLTMODE4 -1
 param set-default COM_FLTMODE5 -1
-param set-default COM_FLTMODE6  6
+param set-default COM_FLTMODE6  1
 param set-default COM_RC_LOSS_T 3


@@ -68,6 +71,9 @@ param set-default EKF2_OF_GATE 2.0
 param set-default EKF2_OF_POS_X -0.035
 param set-default EKF2_OF_POS_Y 0.0
 param set-default EKF2_OF_POS_Z 0.033
+param set-default EKF2_OF_MIN_RNG 0.01
+param set-default EKF2_OF_A_HMAX 7.0
+param set-default EKF2_OF_QMIN 30

 param set-default EKF2_PCOEF_XN -0.3
 param set-default EKF2_PCOEF_XP -0.4
@@ -141,58 +147,31 @@ param set-default MPC_Z_VEL_P 0.27


 # gimbal configuration
-param set-default MNT_MODE_IN 1
-param set-default MNT_MODE_OUT 2
-param set-default MNT_MAN_PITCH 1
-
+param set-default MNT_MODE_IN 0
+param set-default MNT_MODE_OUT 1
+param set-default MNT_MAN_PITCH 2
+param set-default MNT_RC_IN_MODE 1
+param set-default MNT_RATE_PITCH 30

 # RC
 param set-default RC_CHAN_CNT       12

 param set-default RC_MAP_THROTTLE   1
-param set-default RC_MAP_ROLL       2
+param set-default RC_MAP_YAW        2
 param set-default RC_MAP_PITCH      3
-param set-default RC_MAP_YAW        4
-param set-default RC_MAP_FLTMODE    5
-param set-default RC_MAP_AUX1       7
-
-param set-default RC1_DZ            10
-param set-default RC1_MAX           3413
-param set-default RC1_MIN           683
-param set-default RC1_REV           1
-param set-default RC1_TRIM          683
-param set-default RC2_DZ            10
-param set-default RC2_MAX           3413
-param set-default RC2_MIN           683
-param set-default RC2_REV           -1
-param set-default RC2_TRIM          2048
-param set-default RC3_DZ            10
-param set-default RC3_MAX           3413
-param set-default RC3_MIN           683
-param set-default RC3_REV           1
-param set-default RC3_TRIM          2048
-param set-default RC4_DZ            10
-param set-default RC4_MAX           3413
-param set-default RC4_MIN           683
-param set-default RC4_REV           -1
-param set-default RC4_TRIM          2048
-param set-default RC5_DZ            10
-param set-default RC5_MAX           3414
-param set-default RC5_MIN           2048
-param set-default RC5_REV           1
-param set-default RC5_TRIM          2048
-param set-default RC7_DZ            10
-param set-default RC7_MAX           3413
-param set-default RC7_MIN           683
-param set-default RC7_REV           1
-param set-default RC7_TRIM          2048
+param set-default RC_MAP_ROLL       4
+param set-default RC_MAP_AUX2       5
+param set-default RC_MAP_AUX3       10
+param set-default RC_MAP_AUX4       8
+param set-default RC_MAP_FLTMODE    6
+param set-default RC1_TRIM          1000


 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
 param set-default SENS_FLOW_MAXHGT 5.0
-param set-default SENS_FLOW_ROT    4
+param set-default SENS_FLOW_ROT    0

-
-mixer load /dev/tap_esc /etc/mixers/quad_x.main.mix
+# ignore the SD card errors and use normal startup sound
+set STARTUP_TUNE "1"
@@ -23,6 +23,23 @@

 . ${R}etc/init.d/rc.mc_defaults

+param set-default CA_ROTOR_COUNT 6
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 0.5
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -0.5
+param set-default CA_ROTOR2_PX 0.43
+param set-default CA_ROTOR2_PY -0.25
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.43
+param set-default CA_ROTOR3_PY 0.25
+param set-default CA_ROTOR4_PX 0.43
+param set-default CA_ROTOR4_PY 0.25
+param set-default CA_ROTOR5_PX -0.43
+param set-default CA_ROTOR5_PY -0.25
+param set-default CA_ROTOR5_KM -0.05
+
 set MIXER hexa_x

 # Need to set all 8 channels
@@ -1,52 +0,0 @@
-#!/bin/sh
-#
-# @name Hex X with control allocation
-#
-# @type Hexarotor x
-# @class Copter
-#
-# @maintainer Silvan Fuhrer
-#
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default SYS_CTRL_ALLOC 1
-
-param set-default CA_AIRFRAME 0
-param set-default CA_MC_R_COUNT 6
-
-param set-default CA_MC_R0_PX 0.0
-param set-default CA_MC_R0_PY 0.275
-param set-default CA_MC_R0_KM -0.05
-
-param set-default CA_MC_R1_PX 0.0
-param set-default CA_MC_R1_PY -0.275
-param set-default CA_MC_R1_KM 0.05
-
-param set-default CA_MC_R2_PX 0.238
-param set-default CA_MC_R2_PY -0.1375
-param set-default CA_MC_R2_KM -0.05
-
-param set-default CA_MC_R3_PX -0.238
-param set-default CA_MC_R3_PY 0.1375
-param set-default CA_MC_R3_KM 0.05
-
-param set-default CA_MC_R4_PX 0.238
-param set-default CA_MC_R4_PY 0.1375
-param set-default CA_MC_R4_KM 0.05
-
-param set-default CA_MC_R5_PX -0.238
-param set-default CA_MC_R5_PY -0.1375
-param set-default CA_MC_R5_KM -0.05
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-
-set MIXER skip
-set MIXER_AUX none
@@ -23,6 +23,23 @@

 . ${R}etc/init.d/rc.mc_defaults

+param set-default CA_ROTOR_COUNT 6
+param set-default CA_ROTOR0_PX 0.5
+param set-default CA_ROTOR0_PY 0.0
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX -0.5
+param set-default CA_ROTOR1_PY 0.0
+param set-default CA_ROTOR2_PX -0.25
+param set-default CA_ROTOR2_PY -0.43
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX 0.25
+param set-default CA_ROTOR3_PY 0.43
+param set-default CA_ROTOR4_PX 0.25
+param set-default CA_ROTOR4_PY -0.43
+param set-default CA_ROTOR5_PX -0.25
+param set-default CA_ROTOR5_PY 0.43
+param set-default CA_ROTOR5_KM -0.05
+
 set MIXER hexa_+

 # Need to set all 8 channels
@@ -25,6 +25,28 @@

 . ${R}etc/init.d/rc.mc_defaults

+param set-default CA_ROTOR_COUNT 8
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR0_PX 0.46
+param set-default CA_ROTOR0_PY 0.19
+param set-default CA_ROTOR1_KM -0.05
+param set-default CA_ROTOR1_PX -0.46
+param set-default CA_ROTOR1_PY -0.19
+param set-default CA_ROTOR2_PX 0.19
+param set-default CA_ROTOR2_PY 0.46
+param set-default CA_ROTOR3_PX -0.46
+param set-default CA_ROTOR3_PY 0.19
+param set-default CA_ROTOR4_PX 0.46
+param set-default CA_ROTOR4_PY -0.19
+param set-default CA_ROTOR5_PX -0.19
+param set-default CA_ROTOR5_PY -0.46
+param set-default CA_ROTOR6_KM -0.05
+param set-default CA_ROTOR6_PX 0.19
+param set-default CA_ROTOR6_PY -0.46
+param set-default CA_ROTOR7_KM -0.05
+param set-default CA_ROTOR7_PX -0.19
+param set-default CA_ROTOR7_PY 0.46
+
 set MIXER octo_x

 set PWM_OUT 12345678
@@ -40,6 +40,7 @@ px4_add_romfs_files(
 	1002_standard_vtol.hil
 	1100_rc_quad_x_sih.hil
 	1101_rc_plane_sih.hil
+	1102_tailsitter_duo_sih.hil

 	# [2000, 2999] Standard planes"
 	2100_standard_plane
@@ -71,7 +72,7 @@ px4_add_romfs_files(
 	4015_holybro_s500
 	4016_holybro_px4vision
 	4017_nxp_hovergames
-	4018_s500_ctrlalloc
+	4019_x500_v2
 	4030_3dr_solo
 	4031_3dr_quad
 	4040_reaper
@@ -98,7 +99,6 @@ px4_add_romfs_files(
 	# [6000, 6999] Hexarotor x"
 	6001_hexa_x
 	6002_draco_r
-	6003_hexa_x_ctrlalloc

 	# [7000, 7999] Hexarotor +"
 	7001_hexa_+
@@ -48,6 +48,14 @@ fi
 #                        End Estimator Group Selection                        #
 ###############################################################################

+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 #
 # Start Airship Attitude Controller.
 #
@@ -10,6 +10,14 @@
 #
 ekf2 start &

+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 #
 # Start attitude controller.
 #
@@ -45,7 +45,7 @@ fi
 #
 # Set the default output mode if none was set.
 #
-if [ $OUTPUT_MODE = none ]
+if [ $OUTPUT_MODE = none -a $OUTPUT_MODE != skip ]
 then
 	if [ $USE_IO = yes ]
 	then
@@ -72,7 +72,7 @@ fi
 #
 # If OUTPUT_MODE = none then something is wrong with setup and we shouldn't try to enable output.
 #
-if [ $OUTPUT_MODE != none ]
+if [ $OUTPUT_MODE != none -a $OUTPUT_MODE != skip ]
 then

 	if [ $OUTPUT_MODE = hil -o $OUTPUT_MODE = sim ]
@@ -7,7 +7,10 @@

 set VEHICLE_TYPE mc

-param set-default IMU_GYRO_RATEMAX 800
+if param compare IMU_GYRO_RATEMAX 400
+then
+	param set-default IMU_GYRO_RATEMAX 800
+fi

 param set-default NAV_ACC_RAD 2

@@ -12,6 +12,13 @@ ekf2 start &
 #attitude_estimator_q start
 #local_position_estimator start

+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi

 #
 # Start attitude controllers.
@@ -4,19 +4,6 @@
 #
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
-
-if ! ver hwcmp OMNIBUS_F4SD
-then
-	if ! ver hwcmp BITCRAZE_CRAZYFLIE
-	then
-		# Configure all I2C buses to 100 KHz as they
-		# are all external or slow
-		# TODO: move this
-		pwm_out i2c 1 100000
-		pwm_out i2c 2 100000
-	fi
-fi
-
 ###############################################################################
 #                           Begin Optional drivers                            #
 ###############################################################################
@@ -143,6 +130,13 @@ then
 	fi
 fi

+# SHT3x temperature and hygrometer sensor, external I2C
+if param compare -s SENS_EN_SHT3X 1
+then
+	sht3x start -X
+	sht3x start -X -a 0x45
+fi
+
 # TE MS4525 differential pressure sensor external I2C
 if param compare -s SENS_EN_MS4525 1
 then
@@ -15,6 +15,14 @@ ekf2 start &
 #                        End Estimator Group Selection                        #
 ###############################################################################

+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 #
 # Start UUV Attitude Controller.
 #
@@ -15,6 +15,14 @@ ekf2 start &
 #                        End Estimator group selection                        #
 ###############################################################################

+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 airspeed_selector start

 vtol_att_control start
@@ -72,28 +72,7 @@ then
 			umount /fs/microsd

 		else
-			# very basic I/O test
-			set PX4_INIT_TEST_FILE "/fs/microsd/.px4_init_test_file"
-			date >> $PX4_INIT_TEST_FILE
-
-			if [ $? -eq 0 -a -f $PX4_INIT_TEST_FILE ]
-			then
-				cat $PX4_INIT_TEST_FILE
-				rm $PX4_INIT_TEST_FILE
-
-				if [ $? -eq 0 -a ! -f $PX4_INIT_TEST_FILE ]
-				then
-					set SDCARD_AVAILABLE yes
-				fi
-			fi
-			unset PX4_INIT_TEST_FILE
-
-			if [ $SDCARD_AVAILABLE = no ]
-			then
-				echo "ERROR [init] card I/O failure, formatting"
-				set SDCARD_FORMAT yes
-				umount /fs/microsd
-			fi
+			set SDCARD_AVAILABLE yes
 		fi
 	fi

@@ -179,6 +158,11 @@ else
 		# try importing from backup file
 		if [ -f "/fs/microsd/parameters_backup.bson" ]
 		then
+			echo "[init] importing from parameter backup"
+
+			# dump current backup file contents for comparison
+			param dump /fs/microsd/parameters_backup.bson
+
 			param import /fs/microsd/parameters_backup.bson
 		fi
 	fi
@@ -307,15 +291,9 @@ else
 		# Start core UAVCAN module.
 		if uavcan start
 		then
-			if param greater UAVCAN_ENABLE 1
+			if param greater UAVCAN_ENABLE 2
 			then
-				# Start UAVCAN firmware update server and dynamic node ID allocation server.
-				uavcan start fw
-
-				if param greater UAVCAN_ENABLE 2
-				then
-					set OUTPUT_MODE uavcan_esc
-				fi
+				set OUTPUT_MODE uavcan_esc
 			fi
 		else
 			tune_control play error
@@ -431,17 +409,6 @@ else
 		commander start
 	fi

-
-	#
-	# Play the startup tune (if not disabled or there is an error)
-	#
-	param compare CBRK_BUZZER 782090
-	if [ $? != 0 -o $STARTUP_TUNE != 1 ]
-	then
-		tune_control play -t $STARTUP_TUNE
-	fi
-
-
 	# Pre-takeoff continuous magnetometer calibration
 	if param compare -s MBE_ENABLE 1
 	then
@@ -460,7 +427,7 @@ else
 	set BOARD_RC_MAVLINK ${R}etc/init.d/rc.board_mavlink
 	if [ -f $BOARD_RC_MAVLINK ]
 	then
-		echo "Board extras: ${BOARD_RC_MAVLINK}"
+		echo "Board mavlink: ${BOARD_RC_MAVLINK}"
 		. $BOARD_RC_MAVLINK
 	fi
 	unset BOARD_RC_MAVLINK
@@ -499,6 +466,15 @@ else
 	#
 	. ${R}etc/init.d/rc.vehicle_setup

+	#
+	# Play the startup tune (if not disabled or there is an error)
+	#
+	param compare CBRK_BUZZER 782090
+	if [ "$?" != "0" -o "$STARTUP_TUNE" != "1" ]
+	then
+		tune_control play -t $STARTUP_TUNE
+	fi
+
 	#
 	# Start the navigator.
 	#
@@ -510,11 +486,11 @@ else
 	. ${R}etc/init.d/rc.thermal_cal

 	#
-	# Start vmount to control mounts such as gimbals, disabled by default.
+	# Start gimbal to control mounts such as gimbals, disabled by default.
 	#
 	if param greater -s MNT_MODE_IN -1
 	then
-		vmount start
+		gimbal start
 	fi

 	# Check for flow sensor
@@ -33,15 +33,11 @@

 px4_add_romfs_files(
 	autogyro_sitl.main.mix
-	boat_sitl.main.mix
 	delta_wing_sitl.main.mix
 	package_drop.aux.mix
 	plane_sitl.main.mix
 	quad_x_vtol.main.mix
-	rover_ackermann_sitl.main.mix
-	rover_diff_sitl.main.mix
 	standard_vtol_sitl.main.mix
 	tiltrotor_sitl.main.mix
 	uuv_x_sitl.main.mix
-	vectored6dof_sitl.main.mix
 )
@@ -1,15 +0,0 @@
-Mixer for SITL boat
-=========================================================
-
-Throttle of left propeller of boat on Output 0
---------------------------------------
-M: 2
-S: 0 2    10000   10000      0  -10000  10000
-S: 0 3    10000   10000      0  -10000  10000
-
-
-Throttle of right propeller of boat on Output 1
---------------------------------------
-M: 2
-S: 0 2   -10000  -10000      0  -10000  10000
-S: 0 3    10000   10000      0  -10000  10000
@@ -1,46 +0,0 @@
-Mixer for SITL rover
-=========================================================
-
-Output 0
---------------------------------------
-M: 1
-O:       10000   10000      0 -10000  10000
-S: 0 2   10000   10000      0 -10000  10000
-
-Output 1
---------------------------------------
-M: 1
-O:       10000   10000      0 -10000  10000
-S: 0 2   10000   10000      0 -10000  10000
-
-Output 2
---------------------------------------
-Z:
-
-Output 3
---------------------------------------
-Z:
-
-Output 4
---------------------------------------
-Z:
-
-Output 5
---------------------------------------
-M: 1
-O:      10000  10000      0 -10000  10000
-S: 0 3  10000  10000      0 -10000  10000
-
-Output 6
---------------------------------------
-M: 1
-O:      10000  10000      0 -10000  10000
-S: 0 3  10000  10000      0 -10000  10000
-
-Output 7
---------------------------------------
-Z:
-
-Output 8
---------------------------------------
-Z:
@@ -1,46 +0,0 @@
-Mixer for SITL rover
-=========================================================
-
-Output 0
---------------------------------------
-M: 2
-S: 0 2  10000   10000      0 -10000  10000
-S: 0 3  10000   10000      0 -10000  10000
-
-Output 1
---------------------------------------
-M: 2
-S: 0 2  10000   10000      0 -10000  10000
-S: 0 3  10000   10000      0 -10000  10000
-
-Output 2
---------------------------------------
-Z:
-
-Output 3
---------------------------------------
-Z:
-
-Output 4
---------------------------------------
-Z:
-
-Output 5
---------------------------------------
-M: 2
-S: 0 2  -10000  -10000      0 -10000  10000
-S: 0 3   10000   10000      0 -10000  10000
-
-Output 6
---------------------------------------
-M: 2
-S: 0 2  -10000  -10000      0 -10000  10000
-S: 0 3   10000   10000      0 -10000  10000
-
-Output 7
---------------------------------------
-Z:
-
-Output 8
---------------------------------------
-Z:
@@ -1,40 +0,0 @@
-# Motor 1
-M: 3
-S: 0 2  -4000  -4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  -4000  -4000  0   -4000  +4000
-# Motor 2
-M: 3
-S: 0 2  +4000  +4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  +4000  +4000  0   -4000  +4000
-# Motor 3
-M: 3
-S: 0 2  -4000  -4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  +4000  +4000  0   -4000  +4000
-# Motor 4
-M: 3
-S: 0 2  +4000  +4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  -4000  -4000  0   -4000  +4000
-# Motor 5
-M: 3
-S: 0 0  -4000  -4000  0   -4000  +4000
-S: 0 1  +4000  +4000  0   -4000  +4000
-S: 0 5  -4000  -4000  0   -4000  +4000
-# Motor 6
-M: 3
-S: 0 0  -4000  -4000  0   -4000  +4000
-S: 0 1  -4000  -4000  0   -4000  +4000
-S: 0 5  +4000  +4000  0   -4000  +4000
-# Motor 7
-M: 3
-S: 0 0  +4000  +4000  0   -4000  +4000
-S: 0 1  +4000  +4000  0   -4000  +4000
-S: 0 5  +4000  +4000  0   -4000  +4000
-# Motor 8
-M: 3
-S: 0 0  +4000  +4000  0   -4000  +4000
-S: 0 1  -4000  -4000  0   -4000  +4000
-S: 0 5  -4000  -4000  0   -4000  +4000
@@ -90,4 +90,5 @@ px4_add_romfs_files(
 	vtol_convergence.main.mix
 	vtol_delta.aux.mix
 	vtol_tailsitter_duo.main.mix
+	vtol_tailsitter_duo_sat.main.mix
 )
@@ -0,0 +1,39 @@
+Tailsitter duo mixer
+============================
+
+This file defines a mixer for a generic duo tailsitter VTOL (eg TBS Caipirinha tailsitter edition). This vehicle
+has two motors in total, one attached to each wing. It also has two elevons which
+are located in the slipstream of the propellers. This mixer generates 4 PWM outputs
+on the main PWM ouput port, two at 400Hz for the motors, and two at 50Hz for the
+elevon servos. Channels 1-4 are configured to run at 400Hz, while channels 5-8 run
+at the default rate of 50Hz. Note that channels 3 and 4 are assigned but not used.
+
+Motor mixer
+------------
+Channel 1 connects to the right (starboard) motor.
+Channel 2 connects to the left (port) motor.
+
+R: 2-
+
+Zero mixer (2x)
+---------------
+Channels 3,4 are unused.
+
+Z:
+
+Z:
+
+Elevons mixer
+--------------
+Channel 5 connects to the right (starboard) elevon.
+Channel 6 connects to the left (port) elevon.
+Here we saturate the elevons before their full range
+to avoid roll-pitch-yaw coupling during faster maneuvers
+
+M: 2
+S: 1 0   10000   10000    0 -6000  6000
+S: 1 1   10000   10000    0 -6000  6000
+
+M: 2
+S: 1 0   10000   10000    0 -6000  6000
+S: 1 1  -10000  -10000    0 -6000  6000
@@ -7,6 +7,8 @@ from argparse import ArgumentParser
 import re
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile

 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -36,8 +38,9 @@ def print_line(line):
    else:
        print('{0}'.format(line), end='')

-def monitor_firmware_upload(port, baudrate):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=1, xonxoff=True, rtscts=False, dsrdtr=False)
+
+def monitor_firmware_upload(port_url, baudrate):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)

    timeout = 180  # 3 minutes
    timeout_start = time.monotonic()
@@ -49,33 +52,59 @@ def monitor_firmware_upload(port, baudrate):
        serial_line = ser.readline().decode("ascii", errors='ignore')

        if len(serial_line) > 0:
-            if "ERROR" in serial_line:
-                return_code = -1

            print_line(serial_line)

-        if "NuttShell (NSH)" in serial_line:
-            sys.exit(return_code)
-        elif "nsh>" in serial_line:
-            sys.exit(return_code)
+            if "NuttShell (NSH)" in serial_line:
+                sys.exit(return_code)
+            elif "nsh>" in serial_line:
+                sys.exit(return_code)

-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout")
-            sys.exit(-1)
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout")
+                sys.exit(-1)
+
+            # newline every 10 seconds if still running
+            if (len(serial_line) <= 0) and (time.monotonic() - timeout_newline > 10):
+                timeout_newline = time.monotonic()
+                ser.write("\n".encode("ascii"))

-        # newline every 10 seconds if still running
-        if time.monotonic() - timeout_newline > 10:
-            timeout_newline = time.monotonic()
-            ser.write("\n".encode("ascii"))
-            ser.flush()

 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
    parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
    args = parser.parse_args()

-    monitor_firmware_upload(args.device, args.baudrate)
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    monitor_firmware_upload(port_url, args.baudrate)

 if __name__ == "__main__":
   main()
@@ -6,6 +6,9 @@ from subprocess import call, Popen
 from argparse import ArgumentParser
 import re
 import sys
+import datetime
+import serial.tools.list_ports as list_ports
+import tempfile

 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -29,33 +32,38 @@ def print_line(line):
    if "FAILED" in line:
        line = line.replace("FAILED", f"{COLOR_RED}FAILED{COLOR_RESET}", 1)

-    print(line, end='')
+    if "\n" in line:
+        current_time = datetime.datetime.now()
+        print('[{0}] {1}'.format(current_time.isoformat(timespec='milliseconds'), line), end='')
+    else:
+        print('{0}'.format(line), end='')

-def do_param_set_cmd(port, baudrate, param_name, param_value):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=0.1, xonxoff=True, rtscts=False, dsrdtr=False)
+
+def do_param_set_cmd(port_url, baudrate, param_name, param_value):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)

    timeout_start = time.monotonic()
    timeout = 30  # 30 seconds

+    ser.write("\n\n\n".encode("ascii"))
+
    # wait for nsh prompt
    while True:
-        ser.write("\n".encode("ascii"))
-        ser.flush()
-
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if "nsh>" in serial_line:
-            break
+        if len(serial_line) > 0:
+            if "nsh>" in serial_line:
+                break
        else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for prompt")
+                sys.exit(1)
+
+            ser.write("\n".encode("ascii"))

-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for prompt")
-            sys.exit(1)

    # clear
-    ser.readlines()
+    ser.reset_input_buffer()

    # run command
    timeout_start = time.monotonic()
@@ -65,28 +73,32 @@ def do_param_set_cmd(port, baudrate, param_name, param_value):

    # write command (param set) and wait for command echo
    print("Running command: \'{0}\'".format(cmd))
-    serial_cmd = '{0}\r\n'.format(cmd)
+    serial_cmd = '{0}\n'.format(cmd)
+
    ser.write(serial_cmd.encode("ascii"))
-    ser.flush()
+
    while True:
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if cmd in serial_line:
-            print_line(serial_line)
-            break
-        else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
+        if len(serial_line) > 0:
+            if cmd in serial_line:
+                break

-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for command echo")
-            break
+            print_line(serial_line)
+
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for command echo")
+                break
+
+    # clear
+    ser.reset_input_buffer()

    # verify param value
    cmd = "param show " + param_name
-    serial_cmd = '{0}\r\n'.format(cmd)
+    print("Running command: \'{0}\'".format(cmd))
+    serial_cmd = '{0}\n'.format(cmd)
    ser.write(serial_cmd.encode("ascii"))
-    ser.flush()

    param_show_response = param_name + " ["

@@ -96,44 +108,64 @@ def do_param_set_cmd(port, baudrate, param_name, param_value):
    while True:
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if param_show_response in serial_line:
+        if len(serial_line) > 0:
            print_line(serial_line)
-            current_param_value = serial_line.split(":")[-1].strip()

-            if (current_param_value == param_value):
-                sys.exit(0)
+            if param_show_response in serial_line:
+                current_param_value = serial_line.split(":")[-1].strip()
+
+                if (current_param_value == param_value):
+                    sys.exit(0)
+                else:
+                    sys.exit(1)
            else:
-                sys.exit(1)
+                if time.monotonic() > timeout_start + timeout:
+                    if "nsh>" in serial_line:
+                        sys.exit(1) # error, command didn't complete successfully
+                    elif "NuttShell (NSH)" in serial_line:
+                        sys.exit(1) # error, command didn't complete successfully
        else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
-
            if time.monotonic() > timeout_start + timeout:
-                if "nsh>" in serial_line:
-                    sys.exit(1) # error, command didn't complete successfully
-                elif "NuttShell (NSH)" in serial_line:
-                    sys.exit(1) # error, command didn't complete successfully
+                print("Error, timeout")
+                sys.exit(-1)

-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout")
-            sys.exit(-1)
-
-        if len(serial_line) <= 0:
-            ser.write("\r\n".encode("ascii"))
-            ser.flush()
-            time.sleep(0.2)
-
-    ser.close()

 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
    parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
    parser.add_argument("--name", "-p", dest="param_name", help="Parameter name")
    parser.add_argument("--value", "-v", dest="param_value", help="Parameter value")
    args = parser.parse_args()

-    do_param_set_cmd(args.device, args.baudrate, args.param_name, args.param_value)
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    do_param_set_cmd(port_url, args.baudrate, args.param_name, args.param_value)

 if __name__ == "__main__":
   main()
@@ -7,6 +7,8 @@ from argparse import ArgumentParser
 import re
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile

 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -36,15 +38,15 @@ def print_line(line):
    else:
        print('{0}'.format(line), end='')

-def reboot(port, baudrate):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=1, xonxoff=True, rtscts=False, dsrdtr=False)

-    # clear
-    ser.readlines()
+def reboot(port_url, baudrate):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)

    time_start = time.monotonic()
-    ser.write("\nreboot\n".encode("ascii"))
-    ser.flush()
+
+    ser.write("\n\n\n".encode("ascii"))
+
+    ser.write("reboot\n".encode("ascii"))
    time_reboot_cmd = time_start

    timeout_reboot_cmd = 90
@@ -53,31 +55,53 @@ def reboot(port, baudrate):
    return_code = 0

    while True:
-        if time.monotonic() > time_reboot_cmd + timeout_reboot_cmd:
-            time_reboot_cmd = time.monotonic()
-            print("sending reboot cmd again")
-            ser.write("reboot\n".encode("ascii"))
-            ser.flush()
-            time.sleep(0.2)
-
        serial_line = ser.readline().decode("ascii", errors='ignore')

        if len(serial_line) > 0:
+            print_line(serial_line)
+
            if "ERROR" in serial_line:
                return_code = -1

-            print_line(serial_line)
+            if "NuttShell (NSH)" in serial_line:
+                sys.exit(return_code)

-        if "NuttShell (NSH)" in serial_line:
-            sys.exit(return_code)
+        else:
+            if time.monotonic() > time_start + timeout:
+                print("Error, timeout")
+                sys.exit(-1)
+
+            if time.monotonic() > time_reboot_cmd + timeout_reboot_cmd:
+                time_reboot_cmd = time.monotonic()
+                print("sending reboot cmd again")
+                ser.write("reboot\n".encode("ascii"))

-        if time.monotonic() > time_start + timeout:
-            print("Error, timeout")
-            sys.exit(-1)

 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
    parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
    args = parser.parse_args()

@@ -7,6 +7,8 @@ from argparse import ArgumentParser
 import re
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile

 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -37,59 +39,59 @@ def print_line(line):
        print('{0}'.format(line), end='')


-def do_nsh_cmd(port, baudrate, cmd):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=0.2, xonxoff=True, rtscts=False, dsrdtr=False)
+def do_nsh_cmd(port_url, baudrate, cmd):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=1, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)

    timeout_start = time.monotonic()
    timeout = 30  # 30 seconds

+    ser.write("\n\n\n".encode("ascii"))
+
    # wait for nsh prompt
    while True:
-        ser.write("\n".encode("ascii"))
-        ser.flush()
-
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if "nsh>" in serial_line:
-            break
+        if len(serial_line) > 0:
+            if "nsh>" in serial_line:
+                break
        else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for prompt")
+                sys.exit(1)
+
+            ser.write("\n".encode("ascii"))

-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for prompt")
-            sys.exit(1)

    # clear
-    ser.readlines()
+    ser.reset_input_buffer()

    # run command
    timeout_start = time.monotonic()
-    timeout = 1  # 1 second
+    timeout = 5  # 5 seconds

    success_cmd = "cmd succeeded!"

    # wait for command echo
    print("Running command: \'{0}\'".format(cmd))
-    serial_cmd = '{0}; echo "{1}"; echo "{2}";\r\n'.format(cmd, success_cmd, success_cmd)
+    serial_cmd = '{0}; echo "{1}"; echo "{2}";\n'.format(cmd, success_cmd, success_cmd)
    ser.write(serial_cmd.encode("ascii"))
-    ser.flush()
+
    while True:
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if cmd in serial_line:
-            break
-        elif serial_line.startswith(success_cmd) and len(serial_line) <= len(success_cmd) + 2:
-            print_line(serial_line)
-            # we missed the echo, but command ran and succeeded
-            sys.exit(0)
-        else:
-            if len(serial_line) > 0:
+        if len(serial_line) > 0:
+            if cmd in serial_line:
+                break
+            elif serial_line.startswith(success_cmd) and len(serial_line) <= len(success_cmd) + 2:
                print_line(serial_line)
-
-        if (len(serial_line) <= 0) and (time.monotonic() > timeout_start + timeout):
-            print("Error, timeout waiting for command echo")
-            break
+                # we missed the echo, but command ran and succeeded
+                sys.exit(0)
+            else:
+                print_line(serial_line)
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for command echo")
+                break


    timeout_start = time.monotonic()
@@ -100,40 +102,60 @@ def do_nsh_cmd(port, baudrate, cmd):
    while True:
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if success_cmd in serial_line:
-            sys.exit(return_code)
-            break
-        else:
-            if len(serial_line) > 0:
+        if len(serial_line) > 0:
+            if success_cmd in serial_line:
+                sys.exit(return_code)
+            else:
                if "ERROR " in serial_line:
                    return_code = -1

                print_line(serial_line)

-            if "nsh>" in serial_line:
-                sys.exit(1) # error, command didn't complete successfully
-            elif "NuttShell (NSH)" in serial_line:
-                sys.exit(1) # error, command didn't complete successfully
+                if "nsh>" in serial_line:
+                    sys.exit(1) # error, command didn't complete successfully
+                elif "NuttShell (NSH)" in serial_line:
+                    sys.exit(1) # error, command didn't complete successfully
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout")
+                sys.exit(-1)

-        if (len(serial_line) <= 0) and (time.monotonic() > timeout_start + timeout):
-            print("Error, timeout")
-            sys.exit(-1)
-
-        if len(serial_line) <= 0:
-            ser.write("\r\n".encode("ascii"))
-            ser.flush()
-            time.sleep(0.2)
-
-    ser.close()

 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
    parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
    parser.add_argument("--cmd", "-c", dest="cmd", help="Command to run")
    args = parser.parse_args()

-    do_nsh_cmd(args.device, args.baudrate, args.cmd)
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    do_nsh_cmd(port_url, args.baudrate, args.cmd)

 if __name__ == "__main__":
   main()
@@ -9,6 +9,9 @@ import unittest
 import os
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile
+import warnings

 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -38,33 +41,36 @@ def print_line(line):
    else:
        print('{0}'.format(line), end='')

-def do_test(port, baudrate, test_name):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=0.2, xonxoff=True, rtscts=False, dsrdtr=False)
+
+def do_test(port_url, baudrate, test_name):
+
+    # ignore pyserial spy:// resource warnings
+    warnings.filterwarnings(action="ignore", message="unclosed", category=ResourceWarning)
+
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)

    timeout_start = time.monotonic()
    timeout = 30  # 30 seconds

+    ser.write("\n\n\n".encode("ascii"))
+
    # wait for nsh prompt
    while True:
-        ser.write("\n".encode("ascii"))
-        ser.flush()
-
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if "nsh>" in serial_line:
-            break
+        if len(serial_line) > 0:
+            if "nsh>" in serial_line:
+                break
        else:
-            if len(serial_line) > 0:
-                print(serial_line, end='')
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for prompt")
+                return False
+
+            ser.write("\n".encode("ascii"))

-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for prompt")
-            return False

    # clear
-    ser.readlines()
-
-    success = False
+    ser.reset_input_buffer()

    # run test cmd
    print('\n|======================================================================')
@@ -79,20 +85,17 @@ def do_test(port, baudrate, test_name):
    print("Running command: \'{0}\'".format(cmd))
    serial_cmd = '{0}\n'.format(cmd)
    ser.write(serial_cmd.encode("ascii"))
-    ser.flush()
+
    while True:
        serial_line = ser.readline().decode("ascii", errors='ignore')

-        if cmd in serial_line:
-            break
+        if len(serial_line) > 0:
+            if cmd in serial_line:
+                break
        else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
-
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for command echo")
-            break
-
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for command echo")
+                break

    # print results, wait for final result (PASSED or FAILED)
    timeout = 300  # 5 minutes
@@ -105,27 +108,26 @@ def do_test(port, baudrate, test_name):
        if len(serial_line) > 0:
            print_line(serial_line)

-        if test_name + " PASSED" in serial_line:
-            success = True
-            break
-        elif test_name + " FAILED" in serial_line:
-            success = False
-            break
+            if test_name + " PASSED" in serial_line:
+                ser.close()
+                return True
+            elif test_name + " FAILED" in serial_line:
+                ser.close()
+                return False
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout")
+                print(test_name + f" {COLOR_RED}FAILED{COLOR_RESET}")
+                ser.close()
+                return False

-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout")
-            print(test_name + f" {COLOR_RED}FAILED{COLOR_RESET}")
-            success = False
-            break
-
-        # newline every 10 seconds if still running
-        if (len(serial_line) <= 0) and (time.monotonic() - timeout_newline > 10):
-            ser.write("\n".encode("ascii"))
-            timeout_newline = time.monotonic()
+            # newline every 30 seconds if still running
+            if time.monotonic() - timeout_newline > 30:
+                ser.write("\n".encode("ascii"))
+                timeout_newline = time.monotonic()

    ser.close()
-
-    return success
+    return False

 class TestHardwareMethods(unittest.TestCase):
    TEST_DEVICE = 0
@@ -207,12 +209,39 @@ class TestHardwareMethods(unittest.TestCase):
        self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "versioning"))

 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
    parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
    args = parser.parse_args()

-    TestHardwareMethods.TEST_DEVICE = args.device
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    TestHardwareMethods.TEST_DEVICE = port_url
    TestHardwareMethods.TEST_BAUDRATE = args.baudrate

    unittest.main(__name__, failfast=True, verbosity=0, argv=['main'])
@@ -21,21 +21,42 @@ echo "airframes: ${ALL_AIRFRAMES}"
 for airframe in $ALL_AIRFRAMES
 do
 	echo
-	echo "##########################################################################################"
+	echo
+	echo
+	echo "########################################################################################################################"
 	echo " Airframe: $airframe"
-	echo "##########################################################################################"
+	echo "########################################################################################################################"
 	echo

 	${DIR}/nsh_param_set.py --device ${SERIAL_DEVICE} --name SYS_AUTOSTART  --value $airframe
 	${DIR}/nsh_param_set.py --device ${SERIAL_DEVICE} --name CBRK_BUZZER    --value 782097
+
+	# enable all mavlink instances
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_0_CONFIG 101' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_1_CONFIG 102' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_2_CONFIG 103' || true
+
+	# enable all GPS
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set GPS_1_CONFIG 201' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set GPS_1_CONFIG 202' || true
+
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param reset SYS_HITL'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param save'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump'

 	${DIR}/reboot.py --device ${SERIAL_DEVICE}

+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/mtd_params' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/parameters_backup.bson' || true
+
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'ps'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'work_queue status'

 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'pwm info'

+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'mavlink stop-all'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'gps stop'
+
 done
@@ -19,7 +19,7 @@ if [ -z ${PX4_DOCKER_REPO+x} ]; then
 		PX4_DOCKER_REPO="px4io/px4-dev-clang:2021-02-04"
 	elif [[ $@ =~ .*tests* ]]; then
 		# run all tests with simulation
-		PX4_DOCKER_REPO="px4io/px4-dev-simulation-bionic:2021-02-04"
+		PX4_DOCKER_REPO="px4io/px4-dev-simulation-bionic:2021-12-11"
 	fi
 else
 	echo "PX4_DOCKER_REPO is set to '$PX4_DOCKER_REPO'";
@@ -39,7 +39,7 @@ function spawn_model() {

 	echo "Spawning ${MODEL}_${N} at ${X} ${Y}"

-	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.0
+	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.83

 	popd &>/dev/null

@@ -10,7 +10,7 @@ extra_args=
 baudrate=921600
 device=
 ip="127.0.0.1"
-while getopts ":b:d:p:qsr:f:i:loa" opt; do
+while getopts ":b:d:p:qsr:f:i:loat" opt; do
 	case $opt in
 		b)
 			baudrate=$OPTARG
@@ -40,7 +40,10 @@ while getopts ":b:d:p:qsr:f:i:loa" opt; do
 			extra_args="$extra_args -disponly"
 			;;
 		a)
-			extra_args="$extra_args -fw" # aircraft
+			extra_args="$extra_args -fw" # aircraft model
+			;;
+		t)
+			extra_args="$extra_args -ts" # tailsitter model
 			;;
 		\?)
 			echo "Invalid option: -$OPTARG" >&2
@@ -150,13 +150,12 @@ simulator,CONFIG_MODULES_SIMULATOR=y
 temperature_compensation,CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 uuv_att_control,CONFIG_MODULES_UUV_ATT_CONTROL=y
 uuv_pos_control,CONFIG_MODULES_UUV_POS_CONTROL=y
-vmount,CONFIG_MODULES_VMOUNT=y
+gimbal,CONFIG_MODULES_GIMBAL=y
 vtol_att_control,CONFIG_MODULES_VTOL_ATT_CONTROL=y
 bl_update,CONFIG_SYSTEMCMDS_BL_UPDATE=y
 dmesg,CONFIG_SYSTEMCMDS_DMESG=y
 dumpfile,CONFIG_SYSTEMCMDS_DUMPFILE=y
 dyn,CONFIG_SYSTEMCMDS_DYN=y
-esc_calib,CONFIG_SYSTEMCMDS_ESC_CALIB=y
 failure,CONFIG_SYSTEMCMDS_FAILURE=y
 gpio,CONFIG_SYSTEMCMDS_GPIO=y
 hardfault_log,CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
@@ -165,7 +164,6 @@ led_control,CONFIG_SYSTEMCMDS_LED_CONTROL=y
 mft,CONFIG_SYSTEMCMDS_MFT=y
 microbench,CONFIG_SYSTEMCMDS_MICROBENCH=y
 mixer,CONFIG_SYSTEMCMDS_MIXER=y
-motor_ramp,CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 motor_test,CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 mtd,CONFIG_SYSTEMCMDS_MTD=y
 netman,CONFIG_SYSTEMCMDS_NETMAN=y
@@ -130,7 +130,8 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
        return None


-    output_groups = yaml_config['actuator_output']['output_groups']
+    actuator_output_yaml = yaml_config['actuator_output']
+    output_groups = actuator_output_yaml['output_groups']
    module_name = process_module_name(yaml_config['module_name'])
    group_idx = 0

@@ -139,8 +140,8 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
    actuator_output = {
            'label': module_name
        }
-    if 'show_subgroups_if' in yaml_config['actuator_output']:
-        actuator_output['show-subgroups-if'] = yaml_config['actuator_output']['show_subgroups_if']
+    if 'show_subgroups_if' in actuator_output_yaml:
+        actuator_output['show-subgroups-if'] = actuator_output_yaml['show_subgroups_if']

    # config parameters
    def get_config_params(param_list):
@@ -159,7 +160,7 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
            parameters.append(param)
        return parameters

-    parameters = get_config_params(yaml_config['actuator_output'].get('config_parameters', []))
+    parameters = get_config_params(actuator_output_yaml.get('config_parameters', []))
    if len(parameters) > 0:
        actuator_output['parameters'] = parameters

@@ -254,6 +255,15 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
                if show_if: param['show-if'] = show_if
                per_channel_params.append(param)

+
+        param = {
+                'label': 'Rev Range\n(for Servos)',
+                'name': param_prefix+'_REV',
+                'index-offset': -1,
+                'show-as': 'bitset',
+            }
+        per_channel_params.append(param)
+
        # TODO: support non-standard per-channel parameters

        subgroup['per-channel-parameters'] = per_channel_params
@@ -346,33 +356,39 @@ def get_mixers(yaml_config, output_functions, verbose):

            if 'count' in actuator_conf: # possibly dynamic size
                actuator['count'] = actuator_conf['count']
-                per_item_params = actuator_conf['per_item_parameters']
+                per_item_params = actuator_conf.get('per_item_parameters', {})
                params = []
                if 'standard' in per_item_params:
                    standard_params = per_item_params['standard']
+                    index_offset = standard_params.get('index_offset', 0)
                    if 'position' in standard_params:
                        params.extend([
                        {
                            'label': 'Position X',
                            'function': 'posx',
                            'name': standard_params['position'][0],
+                            'index-offset': index_offset,
                        },
                        {
                            'label': 'Position Y',
                            'function': 'posy',
                            'name': standard_params['position'][1],
+                            'index-offset': index_offset,
                        },
                        {
                            'label': 'Position Z',
                            'function': 'posz',
                            'name': standard_params['position'][2],
                            'advanced': True,
+                            'index-offset': index_offset,
                        },
                        ])
                if 'extra' in per_item_params:
                    for extra_param in per_item_params['extra']:
                        params.append({k.replace('_','-'): v for k, v in extra_param.items()})
                actuator['per-item-parameters'] = params
+                if 'item_label_prefix' in actuator_conf:
+                    actuator['item-label-prefix'] = actuator_conf['item_label_prefix']
            else: # fixed size
                labels = []
                pos_x = []
@@ -417,10 +433,18 @@ def get_mixers(yaml_config, output_functions, verbose):

    if verbose:
        print('Mixer configs: {}'.format(config))
+
+    rules = []
+    for rule in yaml_config['mixer'].get('rules', []):
+        rules.append({k.replace('_','-'): v for k, v in rule.items()})
+
+    if verbose:
+        print('Mixer rules: {}'.format(rules))
    
    mixers = {
            'actuator-types': actuator_types,
            'config': config,
+            'rules': rules,
        }
    return mixers

@@ -110,8 +110,15 @@ def parse_yaml_parameters_config(yaml_config, ethernet_supported):
                    param_type = 'INT32'
                    for key in param['values']:
                        tags += '\n * @value {:} {:}'.format(key, param['values'][key])
+                elif param['type'] == 'bitmask':
+                    param_type = 'INT32'
+                    for key in param['bit']:
+                        tags += '\n * @bit {:} {:}'.format(key, param['bit'][key])
+                    max_val = max(key for key in param['bit'])
+                    tags += '\n * @min 0'
+                    tags += '\n * @max {:}'.format((1<<(max_val+1)) - 1)
                elif param['type'] == 'boolean':
-                    param_type = 'BOOL'
+                    param_type = 'INT32'
                    tags += '\n * @boolean'
                elif param['type'] == 'int32':
                    param_type = 'INT32'
@@ -120,7 +127,7 @@ def parse_yaml_parameters_config(yaml_config, ethernet_supported):
                else:
                    raise Exception("unknown param type {:}".format(param['type']))

-                for tag in ['decimal', 'increment', 'category', 'volatile', 'bit',
+                for tag in ['decimal', 'increment', 'category', 'volatile',
                            'min', 'max', 'unit', 'reboot_required']:
                    if tag in param:
                        tags += '\n * @{:} {:}'.format(tag, param[tag])
@@ -136,6 +143,9 @@ def parse_yaml_parameters_config(yaml_config, ethernet_supported):
                        else:
                            default_value = param['default']

+                    if type(default_value) == bool:
+                        default_value = int(default_value)
+
                    # output the existing C-style format
                    ret += '''
 /**
@@ -168,6 +178,8 @@ def get_actuator_output_params(yaml_config, output_functions,
    all_params = {}
    group_idx = 0

+    all_param_prefixes = {}
+
    def add_local_param(param_name, param_def):
        nonlocal all_params
        # add as a list, as there can be multiple entries with the same param_name
@@ -249,6 +261,11 @@ def get_actuator_output_params(yaml_config, output_functions,
                    for i in range(count):
                        output_function_values[start+i] = function_name_label+' '+str(i+1)

+        if param_prefix not in all_param_prefixes:
+            all_param_prefixes[param_prefix] = []
+        all_param_prefixes[param_prefix].append((instance_start,
+            instance_start_label, num_channels, channel_label))
+
        # function param
        param = {
            'description': {
@@ -281,13 +298,9 @@ Note that non-motor outputs might already be active in prearm state if COM_PREAR
 '''
        minimum_description = \
 '''Minimum output value (when not disarmed).
-
-The output range can be reversed by setting Min > Max.
 '''
        maximum_description = \
 '''Maxmimum output value (when not disarmed).
-
-The output range can be reversed by setting Min > Max.
 '''
        failsafe_description = \
 '''This is the output value that is set when in failsafe mode.
@@ -328,6 +341,30 @@ When set to -1 (default), the value depends on the function (see {:}).
                    }
                add_local_param(param_prefix+'_'+param_suffix+'${i}', param)

+    # add reverse range param
+    for param_prefix in all_param_prefixes:
+        groups = all_param_prefixes[param_prefix]
+        # collect the bits
+        channel_bits = {}
+        for instance_start, instance_start_label, num_instances, label in groups:
+            for instance in range(instance_start, instance_start+num_instances):
+                instance_label = instance - instance_start + instance_start_label
+                channel_bits[instance-1] = label + ' ' + str(instance_label)
+
+        param = {
+            'description': {
+                'short': 'Reverse Output Range for '+module_name,
+                'long':
+'''Allows to reverse the output range for each channel.
+Note: this is only useful for servos.
+'''.format(channel_label),
+                },
+            'type': 'bitmask',
+            'default': 0,
+            'bit': channel_bits
+            }
+        add_local_param(param_prefix+'_REV', param)
+
    if verbose: print('adding actuator params: {:}'.format(all_params))
    return all_params

@@ -72,38 +72,27 @@ div.frame_variant td, div.frame_variant th {

            # check if all outputs are equal for the group: if so, show them
            # only once
-            outputs_prev = ['', ''] # split into MAINx and others (AUXx)
-            outputs_match = [True, True]
+            all_outputs = {}
+            num_configs = len(group.GetParams())
            for param in group.GetParams():
                if not self.IsExcluded(param, board):
-                    outputs_current = ['', '']
                    for output_name in param.GetOutputCodes():
                        value = param.GetOutputValue(output_name)
-                        if output_name.lower().startswith('main'):
-                            idx = 0
-                        else:
-                            idx = 1
-                        outputs_current[idx] += '<li><b>%s</b>: %s</li>' % (output_name, value)
-                    for i in range(2):
-                        if len(outputs_current[i]) != 0:
-                            if outputs_prev[i] == '':
-                                outputs_prev[i] = outputs_current[i]
-                            elif outputs_current[i] != outputs_prev[i]:
-                                outputs_match[i] = False
+                        key_value_pair = (output_name, value)
+                        if key_value_pair not in all_outputs:
+                            all_outputs[key_value_pair] = 0
+                        all_outputs[key_value_pair] += 1
+            has_common_outputs = any(all_outputs[k] == num_configs for k in all_outputs)

-            for i in range(2):
-                if len(outputs_prev[i]) == 0:
-                    outputs_match[i] = False
-                if not outputs_match[i]:
-                    outputs_prev[i] = ''
-
-            if outputs_match[0] or outputs_match[1]:
+            if has_common_outputs:
+                outputs_common = ''.join(['<li><b>{:}</b>: {:}</li>'.format(k[0], k[1]) \
+                    for k in all_outputs if all_outputs[k] == num_configs])
                result += '<table>\n'
                result += ' <thead>\n'
                result += '   <tr><th>Common Outputs</th></tr>\n'
                result += ' </thead>\n'
                result += ' <tbody>\n'
-                result += '<tr>\n <td><ul>%s%s</ul></td>\n</tr>\n' % (outputs_prev[0], outputs_prev[1])
+                result += '<tr>\n <td><ul>%s</ul></td>\n</tr>\n' % (outputs_common)
                result += '</tbody></table>\n'

            result += '</div>\n\n'
@@ -138,11 +127,8 @@ div.frame_variant td, div.frame_variant th {
                    for output_name in param.GetOutputCodes():
                        value = param.GetOutputValue(output_name)
                        valstrs = value.split(";")
-                        if output_name.lower().startswith('main'):
-                            idx = 0
-                        else:
-                            idx = 1
-                        if not outputs_match[idx]:
+                        key_value_pair = (output_name, value)
+                        if all_outputs[key_value_pair] < num_configs:
                            outputs += '<li><b>%s</b>: %s</li>' % (output_name, value)
                            has_outputs = True

@@ -48,7 +48,6 @@ echo "Installing PX4 general dependencies"
 sudo pacman -Sy --noconfirm --needed \
 	astyle \
 	base-devel \
-	ccache \
 	clang \
 	cmake \
 	cppcheck \
@@ -77,7 +77,6 @@ sudo apt-get update -y --quiet
 sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 	astyle \
 	build-essential \
-	ccache \
 	cmake \
 	cppcheck \
 	file \
@@ -101,12 +100,6 @@ sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends i
 	zip \
 	;

-if [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
-	echo "Installing Ubuntu 16.04 PX4-compatible ccache version"
-	wget -O /tmp/ccache_3.4.1-1_amd64.deb http://launchpadlibrarian.net/356662933/ccache_3.4.1-1_amd64.deb
-	sudo dpkg -i /tmp/ccache_3.4.1-1_amd64.deb
-fi
-
 # Python3 dependencies
 echo
 echo "Installing PX4 Python3 dependencies"
@@ -56,6 +56,21 @@ def get_N_colors(N, s=0.8, v=0.9):
        hex_out.append("#"+"".join(map(lambda x: format(x, '02x'), rgb)))
    return hex_out

+def topic_filename(topic):
+    MSG_PATH = 'msg/'
+
+    file_list = os.listdir(MSG_PATH)
+    msg_files = [file.replace('.msg', '') for file in file_list if file.endswith(".msg")]
+
+    if topic in msg_files:
+        return topic
+    else:
+        for msg_file in msg_files:
+            with open(f'{MSG_PATH}/{msg_file}.msg') as f:
+                ret = re.findall(f'^# TOPICS.*{topic}.*',f.read(),re.MULTILINE)
+                if len(ret) > 0:
+                    return msg_file
+    return "no_file"

 class PubSub(object):
    """ Collects either publication or subscription information for nodes
@@ -679,8 +694,7 @@ class OutputJSON(object):
            node['type'] = 'topic'
            node['color'] = topic_colors[topic]
            # url is opened when double-clicking on the node
-            # TODO: does not work for multi-topics
-            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic+'.msg'
+            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic_filename(topic)+'.msg'
            nodes.append(node)

        data['nodes'] = nodes
@@ -74,19 +74,17 @@ CONFIG_MODULES_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
-CONFIG_MODULES_VMOUNT=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
@@ -0,0 +1,7 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default BAT1_V_DIV 10.177939394
+param set-default BAT1_A_PER_V 15.391030303
@@ -72,12 +72,6 @@
 #define ADC_RC_RSSI_CHANNEL		11
 #define ADC_AIRSPEED_VOLTAGE_CHANNEL	15

-/* Define Battery 1 Voltage Divider and A per V
- */
-
-#define BOARD_BATTERY1_V_DIV   (10.177939394f)
-#define BOARD_BATTERY1_A_PER_V (15.391030303f)
-
 /* Power supply control and monitoring GPIOs */
 // #define GPIO_VDD_5V_PERIPH_EN	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)
 // #define GPIO_VDD_BRICK_VALID	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
@@ -61,6 +61,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()
@@ -63,6 +63,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()
@@ -4,6 +4,7 @@
 #------------------------------------------------------------------------------

 param set-default CBRK_IO_SAFETY 0
+param set-default CANNODE_GPS_RTCM 1

 safety_button start
 tone_alarm start
@@ -63,6 +63,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()
@@ -0,0 +1,46 @@
+############################################################################
+#
+#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+
+set(PX4_FW_NAME ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}.px4)
+
+# The file needs to have that name in order to be updated automatically.
+set(UPLOAD_NAME autopilot.px4)
+
+add_custom_target(upload_wifi
+	COMMAND ${CMAKE_COMMAND} -E copy ${PX4_FW_NAME} ${UPLOAD_NAME}
+	COMMAND ${PX4_SOURCE_DIR}/boards/atl/mantis-edu/upload.sh ${UPLOAD_NAME}
+	DEPENDS ${PX4_FW_NAME}
+	COMMENT "uploading autopilot.px4 file"
+	USES_TERMINAL
+)
@@ -4,6 +4,8 @@ CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
+CONFIG_DRIVERS_BAROMETER_MAIERTEK_MPC2520=y
+CONFIG_DRIVERS_TAP_ESC=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
@@ -29,7 +31,7 @@ CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_SIH=y
-CONFIG_MODULES_VMOUNT=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
@@ -37,7 +39,6 @@ CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
@@ -5,6 +5,8 @@

 param set-default SYS_AUTOSTART 4061

+param set-default BAT1_V_DIV 9.0
+
 param set-default COM_ARM_SDCARD 0

 param set-default SENS_EXT_I2C_PRB 0
@@ -16,7 +18,7 @@ param set-default SENS_MAG_MODE 0

 param set-default EV_TSK_STAT_DIS 1

-set LOGGER_ARGS "-m mavlink"
+param set-default SYS_DM_BACKEND 1

-# Start esc
-tap_esc start -d /dev/ttyS4 -n 4
+# Use MAVLink log streaming
+set LOGGER_ARGS "-m mavlink -c 0.5"
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+tap_esc start -d /dev/ttyS4 -n 4
+sleep 1
+mixer load /dev/tap_esc /etc/mixers/quad_x.main.mix
@@ -124,6 +124,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -202,7 +204,7 @@ CONFIG_TASK_NAME_SIZE=24
 CONFIG_UART4_BAUD=57600
 CONFIG_UART4_RXBUFSIZE=600
 CONFIG_UART4_RXDMA=y
-CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART4_TXBUFSIZE=3000
 CONFIG_UART7_BAUD=57600
 CONFIG_UART7_RXBUFSIZE=600
 CONFIG_UART7_TXBUFSIZE=1500
@@ -103,7 +103,7 @@ SECTIONS
 		This signature provides the bootloader with a way to delay booting
 		*/
 		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
+		FILL(0xb4ecc2925d7d05c5)
 		. += 8;
 		*(.main_toc)
 		*(.text .text.*)
@@ -39,7 +39,7 @@ add_library(drivers_board
 	spi.cpp
 	timer_config.cpp
 	usb.c
-	pwr.c
+	pwr.cpp
 )
 add_dependencies(drivers_board arch_board_hw_info)

@@ -59,6 +59,13 @@
 #define BOARD_ARMED_STATE_LED  LED_BLUE

 #define FLASH_BASED_PARAMS
+#define RAM_BASED_MISSIONS
+
+// Hacks for MAVLink RC button input
+#define ATL_MANTIS_RC_INPUT_HACKS
+
+// Hacks for MAVLink RC button input
+#define ATL_MANTIS_RC_INPUT_HACKS

 /*
 * ADC channels
@@ -98,9 +105,6 @@
 	 (1 << ADC_HW_REV_SENSE_CHANNEL)           | \
 	 (1 << ADC1_SPARE_1_CHANNEL))

-/* Define Battery 1 Voltage Divider and A per V */
-#define BOARD_BATTERY1_V_DIV         (9.0f)     /* measured with the provided PM board */
-
 /* HW has to large of R termination on ADC todo:change when HW value is chosen */
 #define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)

@@ -147,9 +151,8 @@
 #define RC_SERIAL_PORT                     "/dev/ttyS5"
 #define RC_SERIAL_SINGLEWIRE

-#define BOARD_HAS_POWER_CONTROL	1
 /* power on/off */
-#define MS_PWR_BUTTON_DOWN 1500
+#define MS_PWR_BUTTON_DOWN 750
 #define KEY_AD_GPIO    (GPIO_INPUT|GPIO_PULLUP|GPIO_EXTI|GPIO_PORTC|GPIO_PIN4)
 #define POWER_ON_GPIO  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN5)
 #define POWER_OFF_GPIO (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTC|GPIO_PIN5)
@@ -114,6 +114,8 @@ static void cam_pwr_on_pulse(void)
 	static bool pwr_on_flag = false;

 	if (pwr_on_flag == false) {
+		// This is now done in the bootloader.
+		// However, for transition we can leave it in.
 		up_mdelay(700);
 		stm32_configgpio(GPIO_CAM_PWR_ON_H);
 		up_mdelay(20);
@@ -53,8 +53,7 @@
 #include <nuttx/arch.h>

 #include <uORB/uORB.h>
-#include <uORB/topics/led_control.h>
-#include <uORB/topics/tune_control.h>
+#include <uORB/Publication.hpp>

 #include <arm_arch.h>
 #include "board_config.h"
@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+set -e
+
+PX4_BINARY_FILE="$1"
+
+echo "uploading: $PX4_BINARY_FILE"
+
+PX4_BINARY_FILE_SIZE=$(stat -c%s "$PX4_BINARY_FILE")
+curl -v -F "image=@$PX4_BINARY_FILE" -H "Expect:" -H "File-Size:$PX4_BINARY_FILE_SIZE" http://192.168.42.1/cgi-bin/upload
+
@@ -71,19 +71,17 @@ CONFIG_MODULES_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
-CONFIG_MODULES_VMOUNT=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_NETMAN=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
--- a/Show More
+++ b/Show More