drivers/rc_input: cleanup and simplify data processing per type

- don't store data in class

.ci/Jenkinsfile-compile

@@ -28,7 +28,7 @@ pipeline {
           ]
 
           def base_builds = [
-            target: ["px4_sitl_default"],
+            target: ["px4_sitl_rtps"],
             image: docker_images.base,
             archive: false
           ]
@@ -52,14 +52,12 @@ pipeline {
                      "cuav_x7pro_default",
                      "cubepilot_cubeorange_default",
                      "cubepilot_cubeyellow_default",
-                     "diatone_mamba-f405-mk2_default",
                      "freefly_can-rtk-gps_canbootloader",
                      "freefly_can-rtk-gps_default",
                      "holybro_can-gps-v1_canbootloader",
                      "holybro_can-gps-v1_default",
                      "holybro_durandal-v1_default",
                      "holybro_kakutef7_default",
-                     "holybro_kakuteh7_default",
                      "holybro_pix32v5_default",
                      "matek_h743-slim",
                      "matek_gnss-m9n-f4_canbootloader",
@@ -92,7 +90,6 @@ pipeline {
                      "px4_fmu-v2_fixedwing",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
-                     "px4_fmu-v2_lto",
                      "px4_fmu-v3_default",
                      "px4_fmu-v4_default",
                      "px4_fmu-v4pro_default",
@@ -102,12 +99,10 @@ pipeline {
                      "px4_fmu-v5_stackcheck",
                      "px4_fmu-v5_uavcanv0periph",
                      "px4_fmu-v5_uavcanv1",
-                     "px4_fmu-v5_lto",
                      "px4_fmu-v5x_default",
                      "px4_fmu-v6u_default",
                      "px4_fmu-v6x_default",
                      "px4_io-v2_default",
-                     "sky-drones_smartap-airlink_default",
                      "spracing_h7extreme_default",
                      "uvify_core_default"
             ],

.ci/Jenkinsfile-hardware

@@ -705,21 +705,18 @@ void quickCalibrate() {
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
-
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
 }
@@ -864,7 +861,7 @@ void printTopics() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf_gps_drift" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'

.github/workflows/compile_nuttx.yml

@@ -20,7 +20,6 @@ jobs:
           ark_can-flow,
           ark_can-gps,
           ark_can-rtk-gps,
-          ark_cannode,
           atl_mantis-edu,
           av_x-v1,
           bitcraze_crazyflie,
@@ -30,7 +29,6 @@ jobs:
           cuav_x7pro,
           cubepilot_cubeorange,
           cubepilot_cubeyellow,
-          diatone_mamba-f405-mk2,
           freefly_can-rtk-gps,
           holybro_can-gps-v1,
           holybro_durandal-v1,
@@ -62,7 +60,6 @@ jobs:
           px4_fmu-v5x,
           px4_fmu-v6u,
           px4_fmu-v6x,
-          sky-drones_smartap-airlink,
           spracing_h7extreme,
           uvify_core
           ]

.github/workflows/sitl_tests.yml

@@ -29,9 +29,9 @@ jobs:
         token: ${{ secrets.ACCESS_TOKEN }}
 
     - name: Download MAVSDK
-      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
     - name: Install MAVSDK
-      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp

.gitmodules

@@ -64,6 +64,3 @@
 	path = src/lib/crypto/libtommath
 	url = https://github.com/PX4/libtommath.git
 	branch = px4
-[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
-	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
-	url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git

.vscode/cmake-variants.yaml

@@ -121,16 +121,6 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-rtk-gps_canbootloader
-    ark_cannode_default:
-      short: ark_cannode_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_default
-    ark_cannode_canbootloader:
-      short: ark_cannode_canbootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_cannode_canbootloader
     atl_mantis-edu_default:
       short: atl_mantis-edu
       buildType: MinSizeRel

CMakeLists.txt

@@ -99,7 +99,7 @@
 #
 #=============================================================================
 
-cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)
 
 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -234,14 +234,6 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)
 
-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
-
 set(package-contact "px4users@googlegroups.com")
 
 set(CMAKE_CXX_STANDARD 14)
@@ -420,7 +412,6 @@ endif()
 # subdirectories
 #
 add_library(parameters_interface INTERFACE)
-add_library(kernel_parameters_interface INTERFACE)
 
 include(px4_add_library)
 add_subdirectory(src/lib EXCLUDE_FROM_ALL)
@@ -443,13 +434,7 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
 
 # must be the last module before firmware
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)
-
-if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-target_link_libraries(parameters_interface INTERFACE usr_parameters)
-target_link_libraries(kernel_parameters_interface INTERFACE parameters)
-else()
 target_link_libraries(parameters_interface INTERFACE parameters)
-endif()
 
 # firmware added last to generate the builtin for included modules
 add_subdirectory(platforms/${PX4_PLATFORM})

Kconfig

@@ -51,13 +51,6 @@ menu "Toolchain"
         string "Architecture"
         default ""
 
-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
     config BOARD_FULL_OPTIMIZATION
         bool "Full optmization (O3)"
         default n

Makefile

@@ -330,7 +330,7 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 
 .PHONY: coverity_scan

ROMFS/cannode/init.d/rcS

@@ -88,7 +88,7 @@ unset BOARD_RC_SENSORS
 # Check for flow sensor
 if param compare SENS_EN_PX4FLOW 1
 then
-	px4flow start -X &
+	px4flow start -X
 fi
 
 uavcannode start

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -10,7 +10,6 @@
 # enable fusion of landing target velocity
 param set-default LTEST_MODE 1
 param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
 
 # Start up Landing Target Estimator module
 landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1020_uuv_generic

@@ -8,5 +8,8 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1021_uuv_hippocampus

@@ -8,5 +8,8 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -67,3 +67,4 @@ param set-default PWM_MAIN_FUNC7 107
 param set-default PWM_MAIN_FUNC8 108
 
 set MIXER skip
+

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -25,8 +25,6 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
 
-param set-default FW_SPOILERS_LND 0.4
-
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -10,7 +10,7 @@
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2
 
-param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.1515
 param set-default CA_ROTOR0_PY 0.245
 param set-default CA_ROTOR0_KM 0.05
@@ -23,9 +23,6 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.1515
 param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
 
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_CS0_TYPE 1
@@ -71,6 +68,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -79,5 +77,7 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2
 
+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 20
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 4
 
@@ -70,6 +68,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FW_DIFTHR_EN 1
 param set-default VT_FW_DIFTHR_SC 0.5
@@ -79,5 +78,7 @@ param set-default VT_TYPE 0
 
 param set-default WV_EN 0
 
+set MAV_TYPE 20
+
 set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 21
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3
 
@@ -82,6 +80,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
@@ -89,5 +88,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1
 
+set MAV_TYPE 21
+
 set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -38,6 +38,7 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75
@@ -50,5 +51,7 @@ param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10
 
+set MAV_TYPE 22
+
 set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -37,4 +37,6 @@ param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101
 
+set MAV_TYPE 10
+
 set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -37,4 +37,6 @@ param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC6 102
 param set-default PWM_MAIN_FUNC7 102
 
+set MAV_TYPE 10
+
 set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1062_tf-r1

@@ -10,8 +10,6 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-param set-default MAV_TYPE 10
-
 param set-default GND_L1_DIST 5
 param set-default GND_SP_CTRL_MODE 1
 param set-default GND_SPEED_D 3
@@ -35,4 +33,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0
 
+set MAV_TYPE 10
+
 set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -47,4 +47,6 @@ param set-default CA_R_REV 3
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 
+set MAV_TYPE 11
+
 set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/3011_hexarotor_x

@@ -9,8 +9,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
@@ -26,4 +24,6 @@ param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_DO_STAB 2
 
+set MAV_TYPE 13
+
 set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/6011_typhoon_h480

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-param set-default MAV_TYPE 13
-
 param set-default MC_PITCHRATE_P 0.0800
 param set-default MC_PITCHRATE_I 0.0400
 param set-default MC_PITCHRATE_D 0.0010
@@ -28,4 +26,6 @@ param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2
 
+set MAV_TYPE 13
+
 set MIXER hexa_x

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-param set-default MAV_TYPE 13
-
 param set-default SYS_CTRL_ALLOC 1
 
 param set-default MC_PITCHRATE_P 0.0800
@@ -60,5 +58,7 @@ param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 105
 param set-default PWM_MAIN_FUNC6 106
 
+set MAV_TYPE 13
+
 set MIXER skip
 set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -24,6 +24,7 @@ fi
 
 # initialize script variables
 set IO_PRESENT                  no
+set MAV_TYPE                    none
 set MIXER                       none
 set MIXER_AUX                   none
 set MIXER_FILE                  none
@@ -223,13 +224,6 @@ rc_update start
 manual_control start
 sensors start
 commander start
-
-# Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for rc.interface,
-#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-#
-. ${R}etc/init.d/rc.vehicle_setup
-
 navigator start
 
 # Try to start the micrortps_client with UDP transport if module exists
@@ -259,6 +253,12 @@ then
 	gyro_calibration start
 fi
 
+# Configure vehicle type specific parameters.
+# Note: rc.vehicle_setup is the entry point for rc.interface,
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+#
+. ${R}etc/init.d/rc.vehicle_setup
+
 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink
 

ROMFS/px4fmu_common/init.d/airframes/1000_rc_fw_easystar.hil

@@ -39,26 +39,6 @@ param set-default FW_RR_P 0.3
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
-
 param set SYS_HITL 1
 
 # disable some checks to allow to fly

ROMFS/px4fmu_common/init.d/airframes/10017_steadidrone_qu4d

@@ -36,5 +36,4 @@ param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 4
-
 set MIXER quad_w

ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil

@@ -15,23 +15,6 @@ set MIXER quad_x
 
 param set SYS_HITL 1
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -49,6 +49,7 @@ param set-default MPC_Z_VEL_MAX_DN 1.5
 
 param set-default NAV_ACC_RAD 5
 param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 80
 
 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
@@ -60,37 +61,6 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2
 
-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS1_TRQ_R 0.5
-param set-default CA_SV_CS1_TYPE 2
-param set-default CA_SV_CS2_TRQ_P 1.0
-param set-default CA_SV_CS2_TYPE 3
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-param set-default HIL_ACT_FUNC5 105
-param set-default HIL_ACT_FUNC6 201
-param set-default HIL_ACT_FUNC7 202
-param set-default HIL_ACT_FUNC8 203
-
 
 param set SYS_HITL 1
 
@@ -103,7 +73,7 @@ param set-default CBRK_SUPPLY_CHK 894281
 param set-default COM_PREARM_MODE 0
 param set-default CBRK_IO_SAFETY 22027
 
-param set-default MAV_TYPE 22
+set MAV_TYPE 22
 
 set MIXER standard_vtol_hitl
 

ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil

@@ -17,23 +17,6 @@ set PWM_OUT 1234
 
 param set UAVCAN_ENABLE 0
 
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2
 

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -17,26 +17,6 @@ set PWM_OUT 1234
 
 param set UAVCAN_ENABLE 0
 
-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
-
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2
 

ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil

@@ -26,28 +26,8 @@ param set-default VT_FW_DIFTHR_SC 0.3
 param set-default MPC_MAN_Y_MAX 60
 param set-default MC_PITCH_P 5
 
-param set-default CA_AIRFRAME 4
-param set-default CA_ROTOR_COUNT 2
-param set-default CA_ROTOR0_KM -0.05
-param set-default CA_ROTOR0_PY 0.2
-param set-default CA_ROTOR1_KM -0.05
-param set-default CA_ROTOR1_PY -0.2
-param set-default CA_SV_CS_COUNT 2
-param set-default CA_SV_CS0_TRQ_P 0.3
-param set-default CA_SV_CS0_TRQ_Y 0.3
-param set-default CA_SV_CS0_TYPE 5
-param set-default CA_SV_CS1_TRQ_P 0.3
-param set-default CA_SV_CS1_TRQ_Y -0.3
-param set-default CA_SV_CS1_TYPE 6
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC5 202
-param set-default HIL_ACT_FUNC6 201
-param set-default HIL_ACT_REV 32
-
 param set-default MAV_TYPE 19
-
+set MAV_TYPE 19
 set MIXER vtol_tailsitter_duo_sat
 
 set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13000_generic_vtol_standard

@@ -25,7 +25,7 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_ROTOR0_PY 0.15
 param set-default CA_ROTOR1_PX -0.15
@@ -36,9 +36,6 @@ param set-default CA_ROTOR2_KM -0.05
 param set-default CA_ROTOR3_PX -0.15
 param set-default CA_ROTOR3_PY 0.15
 param set-default CA_ROTOR3_KM -0.05
-param set-default CA_ROTOR4_AX 1.0
-param set-default CA_ROTOR4_AZ 0.0
-param set-default CA_ROTOR4_PX 0.2
 param set-default CA_SV_CS_COUNT 4
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS0_TRQ_R -0.5
@@ -54,8 +51,7 @@ param set-default PWM_AUX_DIS5 950
 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
-
-param set-default MAV_TYPE 22
+set MAV_TYPE 22
 
 set MIXER quad_x
 set MIXER_AUX vtol_AAERT

ROMFS/px4fmu_common/init.d/airframes/13001_caipirinha_vtol

@@ -19,6 +19,7 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+
 param set-default MAV_TYPE 19
 
 param set-default MC_ROLL_P 6
@@ -37,6 +38,7 @@ param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_ID 12
 param set-default VT_TYPE 0
+set MAV_TYPE 19
 
 set MIXER vtol_tailsitter_duo
 

ROMFS/px4fmu_common/init.d/airframes/13002_firefly6

@@ -23,7 +23,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 21
 
 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.19
@@ -46,6 +45,7 @@ param set-default VT_TILT_TRANS 0.5
 param set-default VT_TILT_FW 0.9
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21
 
 set MIXER firefly6
 set MIXER_AUX firefly6

ROMFS/px4fmu_common/init.d/airframes/13003_quad_tailsitter

@@ -13,8 +13,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 20
-
 param set-default CA_AIRFRAME 4
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.15
@@ -40,6 +38,7 @@ param set-default PWM_MAIN_MAX 2000
 param set-default VT_MOT_ID 1234
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
+set MAV_TYPE 20
 
 set MIXER quad_x_vtol
 

ROMFS/px4fmu_common/init.d/airframes/13004_quad+_tailsitter

@@ -7,8 +7,8 @@
 #
 # @output MAIN1 motor 1
 # @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
+# @output MAIN3 motor 4
+# @output MAIN4 motor 5
 # @output MAIN5 elevon left
 # @output MAIN6 elevon right
 # @output MAIN7 canard surface
@@ -22,13 +22,13 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 20
-
 param set-default PWM_MAIN_MAX 2000
 
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
 
+set MAV_TYPE 20
+
 set MIXER quad_+_vtol
 
 set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13005_vtol_AAERT_quad

@@ -52,6 +52,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22
 
 set MIXER quad_x
 set MIXER_AUX vtol_AAERT

ROMFS/px4fmu_common/init.d/airframes/13006_vtol_standard_delta

@@ -41,6 +41,7 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22
 
 set MIXER quad_x
 set MIXER_AUX vtol_delta

ROMFS/px4fmu_common/init.d/airframes/13007_vtol_AAVVT_quad

@@ -33,6 +33,7 @@ param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_TYPE 2
+set MAV_TYPE 22
 
 set MIXER quad_x
 set MIXER_AUX vtol_AAVVT

ROMFS/px4fmu_common/init.d/airframes/13008_QuadRanger

@@ -46,6 +46,7 @@ param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_TYPE 2
+set MAV_TYPE 22
 
 set MIXER quad_x
 set MIXER_AUX vtol_AAERT

ROMFS/px4fmu_common/init.d/airframes/13009_vtol_spt_ranger

@@ -77,6 +77,8 @@ param set-default VT_TRANS_MIN_TM 5
 param set-default VT_TRANS_TIMEOUT    30
 param set-default VT_TYPE 2
 
+set MAV_TYPE 22
+
 set MIXER quad_x
 set MIXER_AUX vtol_AAERT
 

ROMFS/px4fmu_common/init.d/airframes/13010_claire

@@ -13,8 +13,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 21
-
 param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
 param set-default PWM_AUX_MIN 1000
@@ -30,6 +28,7 @@ param set-default VT_TILT_MC 0.08
 param set-default VT_TILT_TRANS 0.5
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21
 
 set MIXER claire
 set MIXER_AUX claire

ROMFS/px4fmu_common/init.d/airframes/13012_convergence

@@ -22,8 +22,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 21
-
 param set-default CBRK_AIRSPD_CHK 162128
 
 param set-default FW_ARSP_MODE 1
@@ -66,12 +64,8 @@ param set-default VT_TRANS_MIN_TM 1.2
 param set-default VT_TRANS_P2_DUR 1.3
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_TYPE 1
+set MAV_TYPE 21
 
 set MIXER vtol_convergence
 
-if ! ver hwcmp MATEK_H743
-then
-	set PWM_OUT 1234
-else
-	set PWM_OUT 3456
-fi	
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -22,8 +22,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 22
-
 param set-default BAT1_CAPACITY 23000
 param set-default BAT1_N_CELLS 4
 param set-default BAT1_R_INTERNAL 0.0025
@@ -136,6 +134,7 @@ param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4
 
 param set-default COM_RC_OVERRIDE 0
+set MAV_TYPE 22
 
 set MIXER deltaquad
 set MIXER_AUX pass

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -23,8 +23,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 22
-
 param set-default BAT1_N_CELLS 6
 
 param set-default FW_AIRSPD_MAX 30
@@ -96,6 +94,8 @@ param set-default VT_PSHER_RMP_DT 2
 param set-default VT_TRANS_MIN_TM 4
 param set-default VT_TYPE 2
 
+set MAV_TYPE 22
+
 set MIXER babyshark
 set MIXER_AUX pass
 

ROMFS/px4fmu_common/init.d/airframes/13030_generic_vtol_quad_tiltrotor

@@ -27,8 +27,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 21
-
 param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1
 param set-default VT_MOT_ID 1234
@@ -59,6 +57,8 @@ param set-default CA_SV_CS3_TRQ_Y 1.0
 param set-default CA_SV_CS3_TYPE 4
 param set-default CA_SV_TL_COUNT 4
 
+set MAV_TYPE 21
+
 set MIXER quad_x
 set MIXER_AUX vtol_TTTTAAER
 

ROMFS/px4fmu_common/init.d/airframes/13050_generic_vtol_octo

@@ -31,6 +31,7 @@ param set-default PWM_AUX_DIS5 950
 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 12345678
 param set-default VT_FW_MOT_OFFID 12345678
+set MAV_TYPE 22
 
 set MIXER octo_cox
 set MIXER_AUX vtol_AAERT

ROMFS/px4fmu_common/init.d/airframes/13200_generic_vtol_tailsitter

@@ -19,8 +19,6 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-default MAV_TYPE 19
-
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0
@@ -39,6 +37,8 @@ param set-default CA_SV_CS1_TRQ_P 0.5
 param set-default CA_SV_CS1_TRQ_Y -0.5
 param set-default CA_SV_CS1_TYPE 6
 
+param set-default MAV_TYPE 19
+set MAV_TYPE 19
 set MIXER vtol_tailsitter_duo
 
 set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/14001_tri_y_yaw+

@@ -18,7 +18,4 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-# MAV_TYPE_TRICOPTER 15
-param set-default MAV_TYPE 15
-
 set MIXER tri_y_yaw+

ROMFS/px4fmu_common/init.d/airframes/14002_tri_y_yaw-

@@ -18,7 +18,4 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-# MAV_TYPE_TRICOPTER 15
-param set-default MAV_TYPE 15
-
 set MIXER tri_y_yaw-

ROMFS/px4fmu_common/init.d/airframes/15001_coax_heli

@@ -17,9 +17,7 @@
 #
 
 . ${R}etc/init.d/rc.mc_defaults
-
-# MAV_TYPE_COAXIAL 3
-param set-default MAV_TYPE 3
+set MIXER coax
 
 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.05
@@ -38,9 +36,6 @@ param set-default PWM_MAIN_RATE 400
 
 param set-default RTL_RETURN_ALT 30
 param set-default RTL_DESCEND_ALT 10
-
-set MIXER coax
-
 # This is the gimbal pass mixer
 set MIXER_AUX pass
 

ROMFS/px4fmu_common/init.d/airframes/16001_helicopter

@@ -20,7 +20,7 @@
 . ${R}etc/init.d/rc.mc_defaults
 
 # Configure as helicopter (number 4 defined in commander_helper.cpp)
-param set-default MAV_TYPE 4
+set MAV_TYPE 4
 
 set MIXER blade130
 

ROMFS/px4fmu_common/init.d/airframes/17003_TF-G2

@@ -41,6 +41,5 @@ param set-default FW_R_LIM 40
 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
-
 set MIXER TF-G2
 set MIXER_AUX pass

ROMFS/px4fmu_common/init.d/airframes/18001_TF-B1

@@ -24,5 +24,8 @@ param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600
 
+set MAV_TYPE 8
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER IO_pass
 set MIXER_AUX pass

ROMFS/px4fmu_common/init.d/airframes/24001_dodeca_cox

@@ -26,7 +26,7 @@
 # @board px4_fmu-v2 exclude
 #
 
-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc
 
 param set-default NAV_ACC_RAD 2
 
@@ -39,7 +39,6 @@ param set-default PWM_MAIN_RATE 400
 
 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
-
 set MIXER dodeca_top_cox
 set MIXER_AUX dodeca_bottom_cox
 

ROMFS/px4fmu_common/init.d/airframes/3033_wingwing

@@ -41,6 +41,9 @@ param set-default FW_RR_P 0.04
 
 param set-default PWM_MAIN_DISARM 1000
 
+# Configure this as plane.
+set MAV_TYPE 1
+
 # Set mixer.
 set MIXER fw_generic_wing
 

ROMFS/px4fmu_common/init.d/airframes/4051_s250aq

@@ -24,6 +24,8 @@
 
 set MIXER quad_s250aq
 
+set MAV_TYPE 2
+
 param set-default ATT_BIAS_MAX 0
 
 param set-default CBRK_IO_SAFETY 22027

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -46,7 +46,7 @@ param set-default COM_RC_LOSS_T 3
 
 
 # ekf2
-param set-default EKF2_AID_MASK 33
+param set-default EKF2_AID_MASK 35
 param set-default EKF2_BARO_DELAY 0
 param set-default EKF2_BARO_NOISE 2.0
 
@@ -164,8 +164,6 @@ param set-default RC_MAP_AUX2       5
 param set-default RC_MAP_AUX3       10
 param set-default RC_MAP_AUX4       8
 param set-default RC_MAP_FLTMODE    6
-param set-default RC_MAP_RETURN_SW  7
-
 param set-default RC1_TRIM          1000
 
 

ROMFS/px4fmu_common/init.d/airframes/4071_ifo

@@ -21,7 +21,10 @@
 # @board cuav_x7pro exclude
 #
 
-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc
+set MIXER quad_x
+set PWM_OUT 1234
+
 
 # Attitude & rate gains
 param set-default MC_ROLLRATE_D 0.0013

ROMFS/px4fmu_common/init.d/airframes/4073_ifo-s

@@ -21,7 +21,10 @@
 # @maintainer Hyon Lim <lim@uvify.com>
 #
 
-. ${R}etc/init.d/rc.mc_defaults
+set VEHICLE_TYPE mc
+set MIXER quad_x
+set PWM_OUT 1234
+
 
 # Attitude & rate gains
 param set-default MC_ROLLRATE_D 0.0013

ROMFS/px4fmu_common/init.d/airframes/4100_tiltquadrotor

@@ -24,6 +24,10 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
+
+# Configure this as Quadrotor
+# set MAV_TYPE 14
+
 # Set mixer
 set MIXER tilt_quad
 set MIXER_AUX tilt_quad

ROMFS/px4fmu_common/init.d/airframes/50000_generic_ground_vehicle

@@ -48,6 +48,8 @@ param set-default NAV_ACC_RAD 0.5
 param set-default PWM_MAIN_DISARM 1500
 param set-default PWM_MAIN_MAX 2000
 param set-default PWM_MAIN_MIN 1000
+# Configure this as rover
+set MAV_TYPE 10
 
 # Set mixer
 set MIXER rover_generic

ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover

@@ -76,6 +76,9 @@ param set-default RBCLW_SER_CFG 104
 # Start this driver after setting parameters, because the driver uses some of those parameters.
 # roboclaw start /dev/ttyS3
 
+# Configure this as rover
+set MAV_TYPE 10
+
 # Set mixer
 set MIXER generic_diff_rover
 

ROMFS/px4fmu_common/init.d/airframes/50004_nxpcup_car_dfrobot_gpx

@@ -65,6 +65,9 @@ param set-default PWM_MAIN_MIN4 970
 # Enable Airspeed check circuit breaker because Rovers will have no airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+# Configure this as rover
+set MAV_TYPE 10
+
 # Set mixer
 set MIXER rover_diff_and_servo
 

ROMFS/px4fmu_common/init.d/airframes/60000_uuv_generic

@@ -16,4 +16,7 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER uuv_x

ROMFS/px4fmu_common/init.d/airframes/60001_uuv_hippocampus

@@ -16,4 +16,7 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
+set MAV_TYPE 12
+param set MAV_TYPE ${MAV_TYPE}
+
 set MIXER uuv_x

ROMFS/px4fmu_common/init.d/airframes/6001_hexa_x

@@ -23,9 +23,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
-
 param set-default CA_ROTOR_COUNT 6
 param set-default CA_ROTOR0_PX 0.0
 param set-default CA_ROTOR0_PY 0.5

ROMFS/px4fmu_common/init.d/airframes/6002_draco_r

@@ -27,8 +27,9 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
+set MIXER hexa_x
+set PWM_OUT 12345678
+
 
 ###############################################
 # Attitude & rate gains
@@ -119,7 +120,3 @@ param set-default MAV_1_MODE 2
 param set-default MAV_1_FORWARD 1
 param set-default MAV_1_RATE 800000
 param set-default SER_TEL2_BAUD 921600
-
-
-set MIXER hexa_x
-set PWM_OUT 12345678

ROMFS/px4fmu_common/init.d/airframes/7001_hexa_+

@@ -23,9 +23,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-# MAV_TYPE_HEXAROTOR 13
-param set-default MAV_TYPE 13
-
 param set-default CA_ROTOR_COUNT 6
 param set-default CA_ROTOR0_PX 0.5
 param set-default CA_ROTOR0_PY 0.0

ROMFS/px4fmu_common/init.d/airframes/8001_octo_x

@@ -25,9 +25,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-# MAV_TYPE_OCTOROTOR 14
-param set-default MAV_TYPE 14
-
 param set-default CA_ROTOR_COUNT 8
 param set-default CA_ROTOR0_KM -0.05
 param set-default CA_ROTOR0_PX 0.46

ROMFS/px4fmu_common/init.d/airframes/9001_octo_+

@@ -25,9 +25,6 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-# MAV_TYPE_OCTOROTOR 14
-param set-default MAV_TYPE 14
-
 set MIXER octo_+
 
 set PWM_OUT 12345678

ROMFS/px4fmu_common/init.d/rc.airship_defaults

@@ -7,9 +7,6 @@
 
 set VEHICLE_TYPE airship
 
-# MAV_TYPE_AIRSHIP 7
-param set-default MAV_TYPE 7
-
 #
 # This is the gimbal pass mixer.
 #

ROMFS/px4fmu_common/init.d/rc.balloon_defaults

@@ -7,9 +7,6 @@
 
 set VEHICLE_TYPE fw
 
-# MAV_TYPE_FREE_BALLOON 8
-param set-default MAV_TYPE 8
-
 #
 # Default parameters for balloon UAVs.
 #

ROMFS/px4fmu_common/init.d/rc.boat_defaults

@@ -7,9 +7,6 @@
 
 set VEHICLE_TYPE rover
 
-# MAV_TYPE_SURFACE_BOAT 11
-param set-default MAV_TYPE 11
-
 #
 # Default parameters for UGVs.
 #

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -7,15 +7,14 @@
 
 set VEHICLE_TYPE fw
 
-# MAV_TYPE_FIXED_WING 1
-param set-default MAV_TYPE 1
-
 #
 # Default parameters for fixed wing UAVs.
 #
 param set-default COM_POS_FS_DELAY 5
 param set-default COM_POS_FS_EPH 15
 param set-default COM_POS_FS_EPV 30
+param set-default COM_POS_FS_GAIN 0
+param set-default COM_POS_FS_PROB 1
 param set-default COM_VEL_FS_EVH 5
 # Disable preflight disarm to not interfere with external launching
 param set-default COM_DISARM_PRFLT -1

ROMFS/px4fmu_common/init.d/rc.mc_defaults

@@ -7,9 +7,6 @@
 
 set VEHICLE_TYPE mc
 
-# MAV_TYPE_QUADROTOR 2
-param set-default MAV_TYPE 2
-
 if param compare IMU_GYRO_RATEMAX 400
 then
 	param set-default IMU_GYRO_RATEMAX 800

ROMFS/px4fmu_common/init.d/rc.rover_defaults

@@ -7,9 +7,6 @@
 
 set VEHICLE_TYPE rover
 
-# MAV_TYPE_GROUND_ROVER 10
-param set-default MAV_TYPE 10
-
 #
 # Default parameters for UGVs.
 #

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -83,24 +83,18 @@ then
 	teraranger start -X
 fi
 
-# paa3905 optical flow sensor (external SPI)
-if param greater -s SENS_EN_PAA3905 0
-then
-	paa3905 -S start
-fi
-
-# paw3902 optical flow sensor (external SPI)
-if param greater -s SENS_EN_PAW3902 0
-then
-	paw3902 -S start
-fi
-
-# pmw3901 optical flow sensor (external SPI)
+# Possible external pmw3901 optical flow sensor
 if param greater -s SENS_EN_PMW3901 0
 then
 	pmw3901 -S start
 fi
 
+# Possible external paw3902 optical flow sensor
+if param greater -s SENS_EN_PAW3902 0
+then
+	paw3902 -S start
+fi
+
 # vl53l1x i2c distance sensor
 if param compare -s SENS_EN_VL53L1X 1
 then
@@ -129,31 +123,13 @@ fi
 # Sensirion SDP3X differential pressure sensor external I2C
 if param compare -s SENS_EN_SDP3X 1
 then
-	if ! sdp3x start -X
+	if ! sdp3x_airspeed start -X
 	then
 		# try another common address
-		sdp3x start -X -a 0x22
+		sdp3x_airspeed start -X -a 0x22
 	fi
 fi
 
-# TE MS4515 differential pressure sensor external I2C
-if param compare -s SENS_EN_MS4515 1
-then
-	ms4515 start -X
-fi
-
-# TE MS4525DO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS4525DO 1
-then
-	ms4525do start -X
-fi
-
-# TE MS5525DSO differential pressure sensor external I2C
-if param compare -s SENS_EN_MS5525DS 1
-then
-	ms5525dso start -X
-fi
-
 # SHT3x temperature and hygrometer sensor, external I2C
 if param compare -s SENS_EN_SHT3X 1
 then
@@ -161,24 +137,16 @@ then
 	sht3x start -X -a 0x45
 fi
 
-# IR-LOCK sensor external I2C
-if param compare -s SENS_EN_IRLOCK 1
+# TE MS4525 differential pressure sensor external I2C
+if param compare -s SENS_EN_MS4525 1
 then
-	irlock start -X
+	ms4525_airspeed start -X
 fi
 
-# SPL06 sensor external I2C
-if param compare -s SENS_EN_SPL06 1
+# TE MS5525 differential pressure sensor external I2C
+if param compare -s SENS_EN_MS5525 1
 then
-	spl06 -X start
-	spl06 -X -a 0x77 start
-fi
-
-# PCF8583 counter (RPM sensor)
-if param compare -s SENS_EN_PCF8583 1
-then
-	pcf8583 start -X
-	pcf8583 start -X -a 0x51
+	ms5525_airspeed start -X
 fi
 
 # probe for optional external I2C devices
@@ -198,3 +166,9 @@ then
 	# start last (wait for possible icm20948 passthrough mode)
 	ak09916 -X -q start
 fi
+
+###############################################################################
+#                            End Optional drivers                             #
+###############################################################################
+
+sensors start

ROMFS/px4fmu_common/init.d/rc.uuv_defaults

@@ -7,9 +7,6 @@
 
 set VEHICLE_TYPE uuv
 
-# MAV_TYPE_SUBMARINE 12
-param set-default MAV_TYPE 12
-
 param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_MIN 1050
 param set-default PWM_MAIN_DISARM 1500

ROMFS/px4fmu_common/init.d/rc.vehicle_setup

@@ -12,9 +12,19 @@ if [ $VEHICLE_TYPE = fw ]
 then
 	if [ $MIXER = none ]
 	then
-		echo "FW mixer undefined"
+		# Set default mixer for fixed wing if not defined.
+		set MIXER AERT
 	fi
 
+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 1 if not defined.
+		set MAV_TYPE 1
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface
 
@@ -32,6 +42,41 @@ then
 		echo "MC mixer undefined"
 	fi
 
+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 2 if not defined.
+		set MAV_TYPE 2
+
+		# Use mixer to detect vehicle type
+		if [ $MIXER = coax ]
+		then
+			set MAV_TYPE 3
+		fi
+		if [ $MIXER = hexa_x -o $MIXER = hexa_+ ]
+		then
+			set MAV_TYPE 13
+		fi
+		if [ $MIXER = hexa_cox ]
+		then
+			set MAV_TYPE 13
+		fi
+		if [ $MIXER = octo_x -o $MIXER = octo_+ ]
+		then
+			set MAV_TYPE 14
+		fi
+		if [ $MIXER = octo_cox -o $MIXER = octo_cox_w ]
+		then
+			set MAV_TYPE 14
+		fi
+		if [ $MIXER = tri_y_yaw- -o $MIXER = tri_y_yaw+ ]
+		then
+			set MAV_TYPE 15
+		fi
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface
 
@@ -46,9 +91,19 @@ if [ $VEHICLE_TYPE = rover ]
 then
 	if [ $MIXER = none ]
 	then
-		echo "rover mixer undefined"
+		# Set default mixer for UGV if not defined.
+		set MIXER rover_generic
 	fi
 
+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 10 if not defined.
+		set MAV_TYPE 10
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface
 
@@ -66,6 +121,25 @@ then
 		echo "VTOL mixer undefined"
 	fi
 
+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 19 if not defined.
+		set MAV_TYPE 19
+
+		# Use mixer to detect vehicle type.
+		if [ $MIXER = firefly6 ]
+		then
+			set MAV_TYPE 21
+		fi
+		if [ $MIXER = quad_x_pusher_vtol ]
+		then
+			set MAV_TYPE 22
+		fi
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface
 
@@ -83,6 +157,15 @@ then
 		echo "Airship mixer undefined"
 	fi
 
+	if [ $MAV_TYPE = none ]
+	then
+		# Set a default MAV_TYPE = 7 if not defined.
+		set MAV_TYPE 7
+	fi
+
+	# Set the mav type parameter.
+	param set MAV_TYPE ${MAV_TYPE}
+
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface
 
@@ -100,11 +183,19 @@ then
 		echo "UUV mixer undefined"
 	fi
 
+	if [ $MAV_TYPE = none ]
+	then
+		# Set default MAV_TYPE to submarine if not defined
+		set MAV_TYPE 12
+	fi
+
+	param set MAV_TYPE ${MAV_TYPE}
 	# Load mixer and configure outputs.
 	. ${R}etc/init.d/rc.interface
 
 	# Start standard vtol apps.
 	. ${R}etc/init.d/rc.uuv_apps
+
 fi
 
 

ROMFS/px4fmu_common/init.d/rc.vtol_defaults

@@ -7,9 +7,6 @@
 
 set VEHICLE_TYPE vtol
 
-# MAV_TYPE_VTOL_FIXEDROTOR 22
-param set-default MAV_TYPE 22
-
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_YAW_TMT 10
 

ROMFS/px4fmu_common/init.d/rcS

@@ -29,6 +29,7 @@ set IOFW "/etc/extras/px4_io-v2_default.bin"
 set IO_PRESENT no
 set LOGGER_ARGS ""
 set LOGGER_BUF 8
+set MAV_TYPE none
 set MIXER none
 set MIXER_AUX none
 set MIXER_FILE none
@@ -405,17 +406,9 @@ else
 			battery_status start
 		fi
 
-		sensors start
 		commander start
 	fi
 
-	#
-	# Configure vehicle type specific parameters.
-	# Note: rc.vehicle_setup is the entry point for rc.interface,
-	#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-	#
-	. ${R}etc/init.d/rc.vehicle_setup
-
 	# Pre-takeoff continuous magnetometer calibration
 	if param compare -s MBE_ENABLE 1
 	then
@@ -466,6 +459,13 @@ else
 		fi
 	fi
 
+	#
+	# Configure vehicle type specific parameters.
+	# Note: rc.vehicle_setup is the entry point for rc.interface,
+	#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+	#
+	. ${R}etc/init.d/rc.vehicle_setup
+
 	#
 	# Play the startup tune (if not disabled or there is an error)
 	#
@@ -493,6 +493,12 @@ else
 		gimbal start
 	fi
 
+	# Check for flow sensor
+	if param compare -s SENS_EN_PX4FLOW 1
+	then
+		px4flow start -X
+	fi
+
 	# Blacksheep telemetry
 	if param compare -s TEL_BST_EN 1
 	then
@@ -509,12 +515,6 @@ else
 		gyro_calibration start
 	fi
 
-	# Check for px4flow sensor
-	if param compare -s SENS_EN_PX4FLOW 1
-	then
-		px4flow start -X &
-	fi
-
 	#
 	# Optional board supplied extras: rc.board_extras
 	#
@@ -573,6 +573,7 @@ unset IO_PRESENT
 unset IOFW
 unset LOGGER_ARGS
 unset LOGGER_BUF
+unset MAV_TYPE
 unset MIXER
 unset MIXER_AUX
 unset MIXER_FILE

ROMFS/px4fmu_common/mixers-sitl/plane_sitl.main.mix

@@ -21,16 +21,14 @@ O:      10000  10000      0 -10000  10000
 S: 0 3      0  20000 -10000 -10000  10000
 
 # mixer for the left aileron
-M: 2
+M: 1
 O:      10000  10000   0 -10000  10000
 S: 0 0  -10000  -10000    0 -10000  10000
-S: 0 5   10000   10000    0 -10000  10000
 
 # mixer for the right aileron
-M: 2
+M: 1
 O:      10000  10000   0 -10000  10000
 S: 0 0  10000  10000    0 -10000  10000
-S: 0 5  10000  10000    0 -10000  10000
 
 # mixer for the elevator
 M: 1

ROMFS/px4fmu_common/mixers-sitl/tiltrotor_sitl.main.mix

@@ -8,22 +8,22 @@ R: 4x
 # tilt servo motor 1
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 
 # tilt servo motor 2
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 
 # tilt servo motor 3
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 
 # tilt servo motor 4
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 
 # mixer for the left aileron
 M: 1

ROMFS/px4fmu_common/mixers/AAERTWF.main.mix

@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
 
-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -20,11 +20,11 @@ endpoints to suit.
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000
 
 Elevator mixer
 ------------

ROMFS/px4fmu_common/mixers/AAVVTWFF.main.mix

@@ -11,7 +11,7 @@ to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,11 +21,11 @@ endpoints to suit.
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_common/mixers/AAVVTWFF_vtail.main.mix

@@ -9,20 +9,20 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw), 3 (thrust) 4 (flaps), 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up mechanically reversed.
 
 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_common/mixers/claire.aux.mix

@@ -10,7 +10,7 @@ Tilt mechanism servo mixer
 M: 1
 
 
-S: 1 8  10000  10000      0 -10000  10000
+S: 1 4  10000  10000      0 -10000  10000
 
 
 

ROMFS/px4fmu_common/mixers/firefly6.aux.mix

@@ -6,7 +6,7 @@
 Tilt mechanism servo mixer
 ---------------------------
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 
 Elevon mixers
 -------------

ROMFS/px4fmu_common/mixers/quad_x_vtol.main.mix

@@ -1,7 +1,5 @@
 Mixer for Tailsitter with x motor configuration and elevons
 ===========================================================
-# @board px4_fmu-v2 exclude
-# @board omnibus_f4sd exclude
 
 This file defines a single mixer for tailsitter with motors in X configuration.  All controls
 are mixed 100%.

ROMFS/px4fmu_common/mixers/vtol_AAVVT.aux.mix

@@ -5,14 +5,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU
 
 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU
+The configuration assumes the aileron servos are connected to PX4FMU 
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,11 +22,11 @@ endpoints to suit.
 
 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 5  10000  10000      0 -10000  10000
+S: 1 6  10000  10000      0 -10000  10000
 
 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 5 -10000 -10000      0 -10000  10000
+S: 1 6 -10000 -10000      0 -10000  10000
 
 
 V-tail mixers

ROMFS/px4fmu_common/mixers/vtol_TTTTAAER.aux.mix

@@ -6,19 +6,19 @@
 ---------------------------
 # front left up:2000 down:1000
 M: 1
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000
 
 # front right up:1000 down:2000
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 
 # rear left up:2000 down:1000
 M: 1
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000
 
 # rear right up:1000 down:2000
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 
 
 # Aileron mixer

ROMFS/px4fmu_common/mixers/vtol_convergence.main.mix

@@ -10,12 +10,12 @@ Tilt mechanism servo mixer
 ---------------------------
 #RIGHT up:2000 down:1000
 M: 2
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 Elevon mixers

ROMFS/px4fmu_test/init.d/rc.sensors

@@ -16,15 +16,15 @@ if board_adc start
 then
 fi
 
-if sdp3x start -X
+if sdp3x_airspeed start -X
 then
 fi
 
-if ms5525dso start -X
+if ms5525_airspeed start -X
 then
 fi
 
-if ms4525do start -X
+if ms4525_airspeed start -X
 then
 fi
 

ROMFS/px4fmu_test/mixers/AAERTWF.main.mix

@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
 
-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000
 
 Elevator mixer
 ------------

ROMFS/px4fmu_test/mixers/AAVVTWFF.main.mix

@@ -9,9 +9,9 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,12 +22,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_test/mixers/vtol2_test.mix

@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0 -20000   9000 -10000  10000
+S: 1 4      0 -20000   9000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000  -10000 -10000  10000
+S: 1 4      0  20000  -10000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000
 
 Elevon mixers