WIP

rcS: Keep Mag Cal with AUTOCONFIG param reset in rcS, deprecate rcS AUTOCNF param (#19693 )
* Deprecate the rcS AUTOCNF script param and associated logic. * Update posix rcS to match previous commit.
2026-06-10 12:30:05 +08:00 · 2022-05-23 21:58:25 -04:00 · 2022-05-23 20:35:22 -04:00 · 2022-05-23 16:21:49 -04:00 · 2022-05-23 16:21:49 -04:00 · 2022-05-23 14:59:11 -04:00
400 changed files with 15158 additions and 10272 deletions
@@ -61,18 +61,20 @@ pipeline {
                     "holybro_kakutef7_default",
                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
-                     "matek_h743-slim",
                     "matek_gnss-m9n-f4_canbootloader",
                     "matek_gnss-m9n-f4_default",
+                     "matek_h743-mini_default",
+                     "matek_h743-slim_default",
+                     "matek_h743_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7_default",
-                     "mro_ctrl-zero-h7_rtps",
                     "mro_ctrl-zero-h7-oem_default",
                     "mro_ctrl-zero-h7-oem_rtps",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7_rtps",
                     "mro_pixracerpro_default",
                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
@@ -87,26 +89,27 @@ pipeline {
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
-                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
+                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
-                     "px4_fmu-v2_lto",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
+                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
+                     "px4_fmu-v5_lto",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
-                     "px4_fmu-v5_uavcanv1",
-                     "px4_fmu-v5_lto",
                     "px4_fmu-v5x_default",
+                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
+                     "raspberrypi_pico_default",
                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
@@ -94,9 +94,10 @@ pipeline {
              steps {
                checkoutSCM()
                sh 'make cuav_x7pro_bootloader'
+                sh 'make cuav_x7pro_default'
                sh 'make cuav_x7pro_test'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'cuav_x7pro_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'cuav_x7pro'
              }
              post {
                always {
@@ -113,15 +114,20 @@ pipeline {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
-                    unstash 'cuav_x7pro_test'
+                    unstash 'cuav_x7pro'
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_bootloader/cuav_x7pro_bootloader.elf'
                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_default/cuav_x7pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                    resetBoard()
                  }
                }
                stage("tests") {
                  steps {
+                    // test loading a range of airframes
+                    sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+
+                    // flash test
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                    runTests()
                  }
                }
@@ -163,10 +169,11 @@ pipeline {
              }
              steps {
                checkoutSCM()
+                sh 'make px4_fmu-v3_default'
+                sh 'make px4_fmu-v3_default bootloader_elf'
                sh 'make px4_fmu-v3_test'
-                sh 'make px4_fmu-v3_test bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3'
              }
              post {
                always {
@@ -183,15 +190,20 @@ pipeline {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v3_test'
+                    unstash 'px4_fmu-v3'
                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                    resetBoard()
                  }
                }
                stage("tests") {
                  steps {
+                    // test loading a range of airframes
+                    sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+
+                    // flash test
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                    runTests()
                  }
                }
@@ -533,9 +545,9 @@ pipeline {
          }
        }

-        stage("px4_fmu-v5_test") {
+        stage("px4_fmu-v5") {
          stages {
-            stage("build px4_fmu-v5_test") {
+            stage("build px4_fmu-v5") {
              agent {
                docker {
                  image 'px4io/px4-dev-nuttx-focal:2021-09-08'
@@ -544,10 +556,11 @@ pipeline {
              }
              steps {
                checkoutSCM()
+                sh 'make px4_fmu-v5_default bootloader_elf'
+                sh 'make px4_fmu-v5_default'
                sh 'make px4_fmu-v5_test'
-                sh 'make px4_fmu-v5_test bootloader_elf'
                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5_test'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v5'
              }
              post {
                always {
@@ -564,18 +577,13 @@ pipeline {
                  steps {
                    sh 'export'
                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_bootloader.elf'
+                    unstash 'px4_fmu-v5'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_bootloader.elf'
                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                    resetBoard()
                  }
                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
                stage("status") {
                  steps {
                    // configure
@@ -585,6 +593,9 @@ pipeline {
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+
+                    // test loading a range of airframes
+                    sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
                  }
                }
                stage("print topics") {
@@ -592,6 +603,14 @@ pipeline {
                    printTopics()
                  }
                }
+                stage("tests") {
+                  steps {
+                    unstash 'px4_fmu-v5'
+                    // flash test
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    runTests()
+                  }
+                }
              }
              post {
                always {
@@ -793,9 +812,6 @@ void resetParameters() {

 void runTests() {

-  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'
-
  resetParameters()

  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
@@ -864,12 +880,15 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -1,32 +1,34 @@
 ---
-name: Bug report
+name: 🐛 Bug report
 about: Create a report to help us improve
+labels: bug-report

 ---

-**Describe the bug**
+## Describe the bug
 A clear and concise description of the bug.

-**To Reproduce**
+## To Reproduce
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-**Expected behavior**
+## Expected behavior
 A clear and concise description of what you expected to happen.

-**Log Files and Screenshots**
+## Log Files and Screenshots
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).
+- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
+- Share the link to the log (Copy and paste the URL of the log)

 Add screenshots to help explain your problem.

-**Drone (please complete the following information):**
+## Drone (please complete the following information):
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-**Additional context**
+## Additional context
 Add any other context about the problem here.
@@ -1,19 +1,20 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
+labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-**Describe problem solved by the proposed feature**
+## Describe problem solved by the proposed feature
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-**Describe your preferred solution**
+## Describe your preferred solution
 A clear and concise description of what you want to happen.

-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.

-**Additional context**
+## Additional context
 Add any other context or screenshots for the feature request here.
@@ -1,10 +1,13 @@
 ---
 name: ⛔ Support Question
-about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.
+about: See http://discuss.px4.io/ for questions about using PX4.

 ---

-We use GitHub issues only to discuss PX4 bugs and new features. For
-questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).
+## Attention! Please read the note below
+
+We use GitHub issues only to discuss PX4 bugs and new features.
+
+**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**

 Thanks!
@@ -1,9 +1,11 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/Devguide for documentation issues
+about: See https://github.com/PX4/px4_user_guide for documentation issues

 ---

-PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).
+## Attention! Please read the note below
+
+**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**

 Thanks!
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-**Describe problem solved by this pull request**
-A clear and concise description of the problem this proposed change will solve.
+## Describe problem solved by this pull request
+A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
 E.g. For this use case I ran into...

-**Describe your solution**
+## Describe your solution
 A clear and concise description of what you have implemented.

-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.

-**Test data / coverage**
+## Test data / coverage
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-**Additional context**
+## Additional context
 Add any other related context or media.
@@ -37,8 +37,10 @@ jobs:
          holybro_kakutef7,
          holybro_kakuteh7,
          holybro_pix32v5,
-          matek_h743-slim,
          matek_gnss-m9n-f4,
+          matek_h743,
+          matek_h743-mini,
+          matek_h743-slim,
          modalai_fc-v1,
          modalai_fc-v2,
          mro_ctrl-zero-f7,
@@ -53,15 +55,16 @@ jobs:
          nxp_fmurt1062-v1,
          nxp_ucans32k146,
          omnibus_f4sd,
-          raspberrypi_pico,
          px4_fmu-v2,
          px4_fmu-v3,
          px4_fmu-v4,
          px4_fmu-v4pro,
          px4_fmu-v5,
          px4_fmu-v5x,
+          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
+          raspberrypi_pico,
          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
@@ -36,14 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/uavcan_v1/libcanard"]
-	path = src/drivers/uavcan_v1/libcanard
-	url = https://github.com/UAVCAN/libcanard.git
-[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
-	path = src/drivers/uavcan_v1/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types.git
-[submodule "src/drivers/uavcan_v1/legacy_data_types"]
-	path = src/drivers/uavcan_v1/legacy_data_types
+[submodule "src/drivers/cyphal/libcanard"]
+	path = src/drivers/cyphal/libcanard
+	url = https://github.com/opencyphal/libcanard.git
+[submodule "src/drivers/cyphal/public_regulated_data_types"]
+	path = src/drivers/cyphal/public_regulated_data_types
+	url = https://github.com/opencyphal/public_regulated_data_types.git
+[submodule "src/drivers/cyphal/legacy_data_types"]
+	path = src/drivers/cyphal/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -9,3 +9,5 @@ launch.json
 ipch/

 browse.vc.db*
+
+*.log
@@ -325,12 +325,13 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
+	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -7,6 +7,11 @@

 . ${R}etc/init.d/rc.vtol_defaults

+# TODO: Enable motor failure detection when the
+# VTOL no longer reports 0A for all ESCs in SITL
+param set-default FD_ACT_EN 0
+param set-default FD_ACT_MOT_TOUT 500
+
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

@@ -9,7 +9,7 @@

 param set-default MAV_TYPE 21

-# param set-default SYS_CTRL_ALLOC 1
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

 param set-default CA_ROTOR_COUNT 4
@@ -27,9 +27,7 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05

 param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
-param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -1,6 +1,4 @@

-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -95,10 +95,9 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
+	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
-
-	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
-	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
@@ -196,14 +195,6 @@ fi

 . "$autostart_file"

-#
-# If autoconfig parameter was set, reset it and save parameters.
-#
-if [ $AUTOCNF = yes ]
-then
-	param set SYS_AUTOCONFIG 0
-fi
-
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250

@@ -61,6 +61,8 @@ param set-default HIL_ACT_FUNC6 400

 param set SYS_HITL 1

+param set UAVCAN_ENABLE 0
+
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone QU4D
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 feed-through of RC AUX1 channel
-# @output MAIN6 feed-through of RC AUX2 channel
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 4
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.13
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.004
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.19
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.004
-param set-default MC_YAW_P 4
-
-set MIXER quad_w
@@ -15,6 +15,8 @@ set MIXER quad_x

 param set SYS_HITL 1

+param set UAVCAN_ENABLE 0
+
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_ROTOR0_PY 0.15
@@ -94,6 +94,8 @@ param set-default HIL_ACT_FUNC8 203

 param set SYS_HITL 1

+param set UAVCAN_ENABLE 0
+
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone MAVRIK
-#
-# @type Octo Coax Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 motor 5
-# @output MAIN6 motor 6
-# @output MAIN7 motor 7
-# @output MAIN8 motor 8
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default MC_PITCH_P 4
-param set-default MC_PITCHRATE_P 0.24
-param set-default MC_PITCHRATE_I 0.09
-param set-default MC_PITCHRATE_D 0.013
-param set-default MC_PITCHRATE_MAX 180
-
-param set-default MC_ROLL_P 4
-param set-default MC_ROLLRATE_P 0.16
-param set-default MC_ROLLRATE_I 0.07
-param set-default MC_ROLLRATE_D 0.009
-param set-default MC_ROLLRATE_MAX 180
-
-param set-default MC_YAW_P 3
-
-param set-default MPC_HOLD_MAX_XY 0.25
-param set-default MPC_THR_MIN 0.15
-param set-default MPC_Z_VEL_MAX_DN 2
-
-param set-default BAT1_N_CELLS 4
-
-set MIXER octo_cox_w
-
-set PWM_OUT 12345678
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# @name CruiseAder Claire
-#
-# @type VTOL Tiltrotor
-# @class VTOL
-#
-# @maintainer Samay Siga <samay_s@icloud.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default MAV_TYPE 21
-
-param set-default PWM_AUX_DISARM 1000
-param set-default PWM_AUX_MAX 2000
-param set-default PWM_AUX_MIN 1000
-param set-default PWM_AUX_RATE 50
-
-param set-default PWM_MAIN_MAX 2000
-
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 13
-param set-default VT_IDLE_PWM_MC 1080
-param set-default VT_TILT_FW 0.9
-param set-default VT_TILT_MC 0.08
-param set-default VT_TILT_TRANS 0.5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 1
-
-set MIXER claire
-set MIXER_AUX claire
-
-set PWM_OUT 1234
@@ -131,7 +131,6 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
-param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name IO Camflyer
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_TRIM 13
-param set-default FW_R_TC 0.3
-param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.74
-param set-default FW_L1_PERIOD 16
-param set-default FW_LND_ANG 15
-param set-default FW_LND_FLALT 5
-param set-default FW_LND_HVIRT 13
-param set-default FW_LND_TLALT 5
-param set-default FW_THR_LND_MAX 0
-param set-default FW_PR_FF 0.35
-param set-default FW_RR_FF 0.6
-param set-default FW_RR_P 0.04
-
-param set-default PWM_MAIN_DISARM 1000
-
-
-set MIXER fw_generic_wing
-
-# Provide ESC a constant 1000 us pulse while disarmed
-set PWM_OUT 4
@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# @name FX-79 Buffalo Flying Wing
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 right aileron
-# @output MAIN2 left aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 30
-param set-default FW_AIRSPD_MIN 13
-
-param set-default NAV_LOITER_RAD 150
-
-set MIXER fw_generic_wing
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name Viper
-#
-# @type Flying Wing
-# @class Plane
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER Viper
@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-# @name Modified Parrot Disco
-#
-# @url
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-####################################
-# Airspeed
-####################################
-param set-default FW_AIRSPD_MAX  27 # = 52 knots
-
-####################################
-# Pitch
-####################################
-
-# Pitch rate feed forward (def = 0.5 %/rad/sec)
-param set-default FW_PR_FF 0.35
-
-####################################
-# Roll
-####################################
-
-# Basic limits (def = 50 deg)
-param set-default FW_R_LIM 40
-
-# Roll rate upper limit (def = 70 deg/s)
-param set-default FW_R_RMAX 50
-
-param set-default PWM_MAIN_DISARM 1000
-
-set MIXER fw_generic_wing.main.mix
-
-# Provide ESC a constant 1000 us pulse
-set PWM_OUT 4
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F330 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F450 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_YAWRATE_P 0.3
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230
@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# @name DJI Matrice 100
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer James Goppert <james.goppert@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 6
-
-param set-default MC_ROLLRATE_P 0.05
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_PITCHRATE_P 0.05
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.001
-
-param set-default MC_YAWRATE_I 0
-
-param set-default PWM_MAIN_MIN 1200
@@ -52,22 +52,16 @@ px4_add_romfs_files(

 	# [3000, 3999] Flying wing"
 	3000_generic_wing
-	3030_io_camflyer
 	3031_phantom
 	3032_skywalker_x5
 	3033_wingwing
-	3034_fx79
-	3035_viper
 	3036_pigeon
-	3037_parrot_disco_mod
 	3100_tbs_caipirinha

 	# [4000, 4999] Quadrotor x"
 	4001_quad_x
 	4003_qavr5
 	4009_qav250
-	4010_dji_f330
-	4011_dji_f450
 	4014_s500
 	4015_holybro_s500
 	4016_holybro_px4vision
@@ -81,7 +75,6 @@ px4_add_romfs_files(
 	4051_s250aq
 	4052_holybro_qav250
 	4053_holybro_kopis2
-	4060_dji_matrice_100
 	4061_atl_mantis_edu
 	4071_ifo
 	4072_draco
@@ -112,7 +105,6 @@ px4_add_romfs_files(
 	# [10000, 10999] Quadrotor Wide arm / H frame"
 	10015_tbs_discovery
 	10016_3dr_iris
-	10017_steadidrone_qu4d
 	10018_tbs_endurance

 	# [11000, 11999] Hexa Cox
@@ -120,7 +112,6 @@ px4_add_romfs_files(

 	# [12000, 12999] Octo Cox
 	12001_octo_cox
-	12002_steadidrone_mavrik

 	# [13000, 13999] VTOL
 	13000_generic_vtol_standard
@@ -133,7 +124,6 @@ px4_add_romfs_files(
 	13007_vtol_AAVVT_quad
 	13008_QuadRanger
 	13009_vtol_spt_ranger
-	13010_claire
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark
@@ -21,7 +21,6 @@ set +e
 # it wastes flash
 #
 set R /
-set AUTOCNF no
 set FCONFIG /fs/microsd/etc/config.txt
 set FEXTRAS /fs/microsd/etc/extras.txt
 set FRC /fs/microsd/etc/rc.txt
@@ -177,13 +176,12 @@ else
 	fi

 	#
-	# Set AUTOCNF flag to use it in AUTOSTART scripts.
+	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
-		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
-		set AUTOCNF yes
+		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	fi

 	#
@@ -274,14 +272,6 @@ else
 		. $FCONFIG
 	fi

-	#
-	# If autoconfig parameter was set, reset it and save parameters.
-	#
-	if [ $AUTOCNF = yes ]
-	then
-		param set SYS_AUTOCONFIG 0
-	fi
-
 	#
 	# Check if UAVCAN is enabled, default to it for ESCs.
 	#
@@ -298,9 +288,9 @@ else
 			tune_control play error
 		fi
 	else
-		if param greater -s UAVCAN_V1_ENABLE 0
+		if param greater -s CYPHAL_ENABLE 0
 		then
-			uavcan_v1 start
+			cyphal start
 		fi
 	fi

@@ -565,7 +555,6 @@ fi
 # Unset all script parameters to free RAM.
 #
 unset R
-unset AUTOCNF
 unset FCONFIG
 unset FEXTRAS
 unset FRC
@@ -40,8 +40,6 @@ px4_add_romfs_files(
 	babyshark.main.mix
 	blade130.main.mix
 	CCPM.main.mix
-	claire.aux.mix
-	claire.main.mix
 	cloudship.main.mix
 	coax.main.mix
 	delta.main.mix
@@ -83,7 +81,6 @@ px4_add_romfs_files(
 	tri_y_yaw-.main.mix
 	uuv_x.main.mix
 	vectored6dof.main.mix
-	Viper.main.mix
 	vtol_AAERT.aux.mix
 	vtol_AAVVT.aux.mix
 	vtol_TTTTAAER.aux.mix
@@ -1,66 +0,0 @@
-Viper Delta-wing mixer
-=================================
-# @board px4_fmu-v2 exclude
-
-Designed for Viper.
-
-TODO (sjwilks): Add mixers for flaps.
-
-This file defines mixers suitable for controlling a delta wing aircraft using
-PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
-servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
-assumed to be unused.
-
-Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch) and 3 (thrust).
-
-See the README for more information on the scaler format.
-
-Elevon mixers
-------------
-Three scalers total (output, roll, pitch).
-
-On the assumption that the two elevon servos are physically reversed, the pitch
-input is inverted between the two servos.
-
-The scaling factor for roll inputs is adjusted to implement differential travel
-for the elevons.
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1   8000   8000      0 -10000  10000
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1  -8000  -8000      0 -10000  10000
-
-Output 2
--------
-This mixer is empty.
-
-Z:
-
-Motor speed mixer
-----------------
-Two scalers total (output, thrust).
-
-This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
-range.  Inputs below zero are treated as zero.
-
-M: 1
-S: 0 3      0  20000 -10000 -10000  10000
-
-Inputs to the mixer come from channel group 2 (payload), channels 0
-(bay servo 1), 1 (bay servo 2) and 3 (drop release).
-----------------------------------------------------
-
-M: 1
-S: 2 0  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 1  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 2  -8000  -8000      0 -10000  10000
-
-
@@ -1,28 +0,0 @@
-# mixer for the CruiseAder Claire tilt mechansim servo and elevons
-
-=======================================================================
-
-
-Tilt mechanism servo mixer
-
---------------------------
-
-M: 1
-
-
-S: 1 8  10000  10000      0 -10000  10000
-
-
-
-Elevon mixers
-
-------------
-
-M: 2
-
-S: 1 0   7500   7500      0 -10000  10000
-S: 1 1   7500   7500      0 -10000  10000
-
-M: 2
-S: 1 0    7500    7500    0 -10000  10000
-S: 1 1   -7500   -7500    0 -10000  10000
@@ -1,8 +0,0 @@
-# CruiseAder Claire Main Multirotor mixer for PX4FMU
-# @board px4_fmu-v2 exclude
-
-#
-
-#===========================
-
-R: 4x
@@ -13,8 +13,7 @@ exec find boards msg src platforms test \
    -path platforms/qurt/dspal -prune -o \
    -path src/drivers/uavcan/libuavcan -prune -o \
    -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
-    -path src/drivers/uavcan_v1/libcanard -prune -o \
-    -path src/drivers/uavcannode_gps_demo/libcanard -prune -o \
+    -path src/drivers/cyphal/libcanard -prune -o \
    -path src/lib/crypto/monocypher -prune -o \
    -path src/lib/events/libevents -prune -o \
    -path src/lib/parameters/uthash -prune -o \
@@ -7,6 +7,9 @@ EXTERNAL_METADATA,CONFIG_BOARD_EXTERNAL_METADATA=y
 BUILD_BOOTLOADER,CONFIG_BOARD_BUILD_BOOTLOADER=y
 UAVCAN_INTERFACES 2,CONFIG_BOARD_UAVCAN_INTERFACES=2
 UAVCAN_INTERFACES 1,CONFIG_BOARD_UAVCAN_INTERFACES=1
+UAVCAN_TIMER_OVERRIDE 2,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
+UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=1
+UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=0
 TESTING,CONFIG_BOARD_TESTING=y
 ETHERNET,CONFIG_BOARD_ETHERNET=y
 adc/ads1115,CONFIG_DRIVERS_ADC_ADS1115=y
@@ -200,13 +200,12 @@ if [[ $INSTALL_SIM == "true" ]]; then

 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		java_version=11
-		gazebo_version=9
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		java_version=13
-		gazebo_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		java_version=11
 	else
 		java_version=14
-		gazebo_version=11
 	fi
 	# Java (jmavsim or fastrtps)
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -220,20 +219,30 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")

 	# Gazebo
+	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+		gazebo_version=9
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		gazebo_packages="gazebo libgazebo-dev"
+	else
+		# default and Ubuntu 20.04
+		gazebo_version=11
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	fi
+
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
 	sudo apt-get update -y --quiet
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		dmidecode \
-		gazebo$gazebo_version \
+		$gazebo_packages \
 		gstreamer1.0-plugins-bad \
 		gstreamer1.0-plugins-base \
 		gstreamer1.0-plugins-good \
 		gstreamer1.0-plugins-ugly \
 		gstreamer1.0-libav \
 		libeigen3-dev \
-		libgazebo$gazebo_version-dev \
 		libgstreamer-plugins-base1.0-dev \
 		libimage-exiftool-perl \
 		libopencv-dev \
@@ -40,6 +40,7 @@ CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
@@ -41,6 +41,7 @@ CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
@@ -4,6 +4,7 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
+CONFIG_DRIVERS_UAVCAN=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_ROVER_POS_CONTROL=n
@@ -4,6 +4,7 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
+CONFIG_DRIVERS_UAVCAN=n
 CONFIG_EXAMPLES_FAKE_GPS=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
@@ -31,7 +31,6 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_MIXER=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PWM=y
@@ -6,32 +6,38 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_COMMON_BAROMETERS=y
-CONFIG_DRIVERS_CAMERA_CAPTURE=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=n
+CONFIG_DRIVERS_CAMERA_TRIGGER=n
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42605=y
-CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
+CONFIG_COMMON_DISTANCE_SENSOR=n
+CONFIG_COMMON_LIGHT=n
+CONFIG_COMMON_MAGNETOMETER=n
 CONFIG_COMMON_OPTICAL_FLOW=y
 CONFIG_DRIVERS_OSD=y
 CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_PWM_OUT_SIM=n
 CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_RPM=y
+CONFIG_DRIVERS_RPM=n
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL_L1=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
@@ -43,42 +49,42 @@ CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
 CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_VMOUNT=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_MODULES_GIMBAL=n
+CONFIG_SYSTEMCMDS_BL_UPDATE=n
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
+CONFIG_SYSTEMCMDS_DUMPFILE=n
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=n
+CONFIG_SYSTEMCMDS_MFT=n
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-CONFIG_SYSTEMCMDS_MTD=y
+CONFIG_SYSTEMCMDS_MOTOR_TEST=n
+CONFIG_SYSTEMCMDS_MTD=n
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_PWM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+CONFIG_SYSTEMCMDS_SD_BENCH=n
+CONFIG_SYSTEMCMDS_SD_STRESS=n
+CONFIG_SYSTEMCMDS_SERIAL_TEST=n
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=n
 CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-CONFIG_EXAMPLES_FAKE_GPS=y
+CONFIG_EXAMPLES_FAKE_GPS=n
@@ -11,7 +11,7 @@
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/matek/h743-slim/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/matek/h743-mini/nuttx-config"
 CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
 CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
 CONFIG_ARCH_CHIP="stm32h7"
@@ -30,7 +30,7 @@ CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_PRODUCTID=0x004b
-CONFIG_CDCACM_PRODUCTSTR="Matek H743-slim"
+CONFIG_CDCACM_PRODUCTSTR="Matek H743-mini"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3162
@@ -51,7 +51,6 @@ CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
 CONFIG_LIB_BOARDCTL=y
-CONFIG_FS_PROCFS_MAX_TASKS=8
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -284,17 +284,17 @@

 #define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)

-/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
- * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+/* 20 MHz Max for now - more reliable on some boards than 25 MHz
+ * 20 MHz = PLL1Q/(2*div), div =  PLL1Q/(2*freq), div = 6 = 240 / 40
 */

 #if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #else
 #  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #endif
 #if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #else
 #  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #endif
@@ -45,11 +45,11 @@ CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_PRODUCTID=0x0036
-CONFIG_CDCACM_PRODUCTSTR="MatekH743-slim"
+CONFIG_CDCACM_PRODUCTSTR="MatekH743-mini"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x1B8C
-CONFIG_CDCACM_VENDORSTR="PX4"
+CONFIG_CDCACM_VENDORSTR="Matek"
 CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
@@ -86,7 +86,6 @@ CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MKFATFS_BUFFER_ALIGMENT=32
 CONFIG_MMCSD=y
 CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
@@ -120,8 +120,8 @@

 /* PWM
 */
-#define DIRECT_PWM_OUTPUT_CHANNELS   10
-#define DIRECT_INPUT_TIMER_CHANNELS  10
+#define DIRECT_PWM_OUTPUT_CHANNELS   12
+#define DIRECT_INPUT_TIMER_CHANNELS  12

 #define BOARD_HAS_PWM  DIRECT_PWM_OUTPUT_CHANNELS

@@ -37,7 +37,7 @@ constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
 	initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
 	initIOTimer(Timer::Timer5, DMA{DMA::Index1, DMA::Stream0, DMA::Channel6}),
 	initIOTimer(Timer::Timer4, DMA{DMA::Index1, DMA::Stream6, DMA::Channel2}),
-	// initIOTimer(Timer::Timer15),
+	initIOTimer(Timer::Timer15),
 };

 constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
@@ -51,8 +51,8 @@ constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel4}, {GPIO::PortD, GPIO::Pin15}),
-	// initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel1}, {GPIO::PortE, GPIO::Pin5}),
-	// initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel2}, {GPIO::PortE, GPIO::Pin6}),
+	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel1}, {GPIO::PortE, GPIO::Pin5}),
+	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel2}, {GPIO::PortE, GPIO::Pin6}),
 };

 constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
@@ -7,17 +7,22 @@ CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=n
+CONFIG_DRIVERS_CAMERA_TRIGGER=n
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42605=y
+CONFIG_COMMON_LIGHT=n
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
 CONFIG_DRIVERS_OSD=y
 CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_PWM_OUT_SIM=n
 CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_RPM=n
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
@@ -43,32 +48,42 @@ CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
 CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_MODULES_GIMBAL=n
+CONFIG_SYSTEMCMDS_BL_UPDATE=n
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
+CONFIG_SYSTEMCMDS_DUMPFILE=n
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=n
+CONFIG_SYSTEMCMDS_MFT=n
 CONFIG_SYSTEMCMDS_MIXER=y
+CONFIG_SYSTEMCMDS_MOTOR_TEST=n
+CONFIG_SYSTEMCMDS_MTD=n
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_PWM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+CONFIG_SYSTEMCMDS_SD_BENCH=n
+CONFIG_SYSTEMCMDS_SD_STRESS=n
+CONFIG_SYSTEMCMDS_SERIAL_TEST=n
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=n
 CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
+CONFIG_EXAMPLES_FAKE_GPS=n
@@ -11,7 +11,7 @@
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/matek/h743-slim/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/matek/h743/nuttx-config"
 CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
 CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
 CONFIG_ARCH_CHIP="stm32h7"
@@ -51,7 +51,6 @@ CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
 CONFIG_LIB_BOARDCTL=y
-CONFIG_FS_PROCFS_MAX_TASKS=8
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -284,17 +284,17 @@

 #define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)

-/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
- * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+/* 20 MHz Max for now - more reliable on some boards than 25 MHz
+ * 20 MHz = PLL1Q/(2*div), div =  PLL1Q/(2*freq), div = 6 = 240 / 40
 */

 #if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #else
 #  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #endif
 #if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #else
 #  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #endif
@@ -50,7 +50,7 @@ CONFIG_CDCACM_PRODUCTSTR="MatekH743"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x1B8C
-CONFIG_CDCACM_VENDORSTR="PX4"
+CONFIG_CDCACM_VENDORSTR="Matek"
 CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
@@ -120,8 +120,8 @@

 /* PWM
 */
-#define DIRECT_PWM_OUTPUT_CHANNELS   10
-#define DIRECT_INPUT_TIMER_CHANNELS  10
+#define DIRECT_PWM_OUTPUT_CHANNELS   12
+#define DIRECT_INPUT_TIMER_CHANNELS  12

 #define BOARD_HAS_PWM  DIRECT_PWM_OUTPUT_CHANNELS

@@ -37,7 +37,7 @@ constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
 	initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
 	initIOTimer(Timer::Timer5, DMA{DMA::Index1, DMA::Stream0, DMA::Channel6}),
 	initIOTimer(Timer::Timer4, DMA{DMA::Index1, DMA::Stream6, DMA::Channel2}),
-	// initIOTimer(Timer::Timer15),
+	initIOTimer(Timer::Timer15),
 };

 constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
@@ -51,8 +51,8 @@ constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel4}, {GPIO::PortD, GPIO::Pin15}),
-	// initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel1}, {GPIO::PortE, GPIO::Pin5}),
-	// initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel2}, {GPIO::PortE, GPIO::Pin6}),
+	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel1}, {GPIO::PortE, GPIO::Pin5}),
+	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel2}, {GPIO::PortE, GPIO::Pin6}),
 };

 constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
@@ -47,7 +47,7 @@

 constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
 	initIOTimer(Timer::Timer1, DMA{DMA::Index2, DMA::Stream5, DMA::Channel6}),
-	initIOTimer(Timer::Timer4),
+	initIOTimer(Timer::Timer4, DMA{DMA::Index1, DMA::Stream6, DMA::Channel2}),
 };


@@ -35,6 +35,7 @@ CONFIG_DRIVERS_RPM=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_UAVCAN=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
@@ -1,4 +1,4 @@
 CONFIG_DRIVERS_UAVCAN=n
-CONFIG_DRIVERS_UAVCAN_V1=y
-CONFIG_UAVCAN_V1_BMS_SUBSCRIBER=y
-CONFIG_UAVCAN_V1_UORB_SENSOR_GPS_SUBSCRIBER=y
+CONFIG_DRIVERS_CYPHAL=y
+CONFIG_CYPHAL_BMS_SUBSCRIBER=y
+CONFIG_CYPHAL_UORB_SENSOR_GPS_SUBSCRIBER=y
@@ -1,9 +1,9 @@
 CONFIG_DRIVERS_UAVCAN=n
-CONFIG_DRIVERS_UAVCAN_V1=y
-CONFIG_UAVCAN_V1_BMS_SUBSCRIBER=y
-CONFIG_UAVCAN_V1_ESC_SUBSCRIBER=y
-CONFIG_UAVCAN_V1_GNSS_SUBSCRIBER_0=y
-CONFIG_UAVCAN_V1_GNSS_SUBSCRIBER_1=y
-CONFIG_UAVCAN_V1_READINESS_PUBLISHER=y
-CONFIG_UAVCAN_V1_UORB_ACTUATOR_OUTPUTS_PUBLISHER=y
-CONFIG_UAVCAN_V1_UORB_SENSOR_GPS_SUBSCRIBER=y
+CONFIG_DRIVERS_CYPHAL=y
+CONFIG_CYPHAL_BMS_SUBSCRIBER=y
+CONFIG_CYPHAL_ESC_SUBSCRIBER=y
+CONFIG_CYPHAL_GNSS_SUBSCRIBER_0=y
+CONFIG_CYPHAL_GNSS_SUBSCRIBER_1=y
+CONFIG_CYPHAL_READINESS_PUBLISHER=y
+CONFIG_CYPHAL_UORB_ACTUATOR_OUTPUTS_PUBLISHER=y
+CONFIG_CYPHAL_UORB_SENSOR_GPS_SUBSCRIBER=y
@@ -7,10 +7,10 @@ CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_LIGHTS_RGBLED_PWM=y
 CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_UAVCAN_V1=y
-CONFIG_UAVCAN_V1_CLIENT=y
-CONFIG_UAVCAN_V1_APP_DESCRIPTOR=y
-CONFIG_UAVCAN_V1_UORB_SENSOR_GPS_PUBLISHER=y
+CONFIG_DRIVERS_CYPHAL=y
+CONFIG_CYPHAL_CLIENT=y
+CONFIG_CYPHAL_APP_DESCRIPTOR=y
+CONFIG_CYPHAL_UORB_SENSOR_GPS_PUBLISHER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
@@ -6,4 +6,4 @@
 pwm_out mode_pwm1 start

 ifup can0
-uavcan_v1 start
+cyphal start
@@ -159,10 +159,12 @@ int s32k1xx_bringup(void)
 	if (s32k1xx_gpioread(BOARD_REVISION_DETECT_PIN)) {
 		/* STB high -> active CAN phy */
 		s32k1xx_pinconfig(PIN_CAN0_STB  | GPIO_OUTPUT_ONE);
+		s32k1xx_pinconfig(PIN_CAN1_STB  | GPIO_OUTPUT_ONE);

 	} else {
 		/* STB low -> active CAN phy */
 		s32k1xx_pinconfig(PIN_CAN0_STB  | GPIO_OUTPUT_ZERO);
+		s32k1xx_pinconfig(PIN_CAN1_STB  | GPIO_OUTPUT_ZERO);
 	}

 #endif
@@ -110,7 +110,7 @@ const struct clock_configuration_s g_initial_clkconfig = {
 		{
 			.mode        = SCG_SPLL_MONITOR_DISABLE,         /* SPLLCM */
 			.div1        = SCG_ASYNC_CLOCK_DIV_BY_1,         /* SPLLDIV1 */
-			.div2        = SCG_ASYNC_CLOCK_DIV_BY_1,         /* SPLLDIV2 */
+			.div2        = SCG_ASYNC_CLOCK_DIV_BY_2,         /* SPLLDIV2 */
 			.prediv      = 1,                                /* PREDIV */
 			.mult        = 40,                               /* MULT */
 			.src         = 0,                                /* SOURCE */
@@ -101,7 +101,7 @@ const struct peripheral_clock_config_s g_peripheral_clockconfig0[] = {
 #else
 		.clkgate = false,
 #endif
-		.clksrc  = CLK_SRC_SIRC_DIV2,
+		.clksrc  = CLK_SRC_SPLL_DIV2,
 	},
 	{
 		.clkname = LPSPI0_CLK,
@@ -110,7 +110,7 @@ const struct peripheral_clock_config_s g_peripheral_clockconfig0[] = {
 #else
 		.clkgate = false,
 #endif
-		.clksrc  = CLK_SRC_SIRC_DIV2,
+		.clksrc  = CLK_SRC_SPLL_DIV2,
 	},
 	{
 		.clkname = LPUART0_CLK,
@@ -119,7 +119,7 @@ const struct peripheral_clock_config_s g_peripheral_clockconfig0[] = {
 #else
 		.clkgate = false,
 #endif
-		.clksrc  = CLK_SRC_SIRC_DIV2,
+		.clksrc  = CLK_SRC_SPLL_DIV2,
 	},
 	{
 		.clkname = LPUART1_CLK,
@@ -128,7 +128,7 @@ const struct peripheral_clock_config_s g_peripheral_clockconfig0[] = {
 #else
 		.clkgate = false,
 #endif
-		.clksrc  = CLK_SRC_SIRC_DIV2,
+		.clksrc  = CLK_SRC_SPLL_DIV2,
 	},
 	{
 		.clkname    = RTC0_CLK,
@@ -1,3 +1,4 @@
+CONFIG_DRIVERS_OSD=n
 CONFIG_DRIVERS_TELEMETRY_FRSKY_TELEMETRY=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_EKF2=y
@@ -7,9 +7,6 @@ CONFIG_SYSTEMCMDS_BL_UPDATE=n
 CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_MS4525DO=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_I2C=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_SERIAL=y
-CONFIG_DRIVERS_DISTANCE_SENSOR_LL40LS=y
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL_L1=y
-CONFIG_SYSTEMCMDS_PERF=y
@@ -1,3 +1,2 @@
 CONFIG_SYSTEMCMDS_BL_UPDATE=n
 CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_I2C=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
@@ -0,0 +1,7 @@
+# CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
+CONFIG_DRIVERS_HEATER=n
+CONFIG_DRIVERS_OSD=n
+CONFIG_DRIVERS_UAVCAN=n
+CONFIG_CYPHAL_BMS_SUBSCRIBER=y
+CONFIG_CYPHAL_UORB_SENSOR_GPS_SUBSCRIBER=y
+CONFIG_DRIVERS_CYPHAL=y
@@ -1,3 +1,4 @@
+# CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
 CONFIG_COMMON_BAROMETERS=n
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=n
 CONFIG_COMMON_MAGNETOMETER=n
@@ -22,7 +23,6 @@ CONFIG_DRIVERS_UAVCAN=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_CAMERA_FEEDBACK=n
 CONFIG_MODULES_ESC_BATTERY=n
-CONFIG_MODULES_GIMBAL=n
 CONFIG_MODULES_GYRO_CALIBRATION=n
 CONFIG_MODULES_GYRO_FFT=n
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
@@ -32,6 +32,7 @@ CONFIG_MODULES_SIH=n
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
 CONFIG_MODULES_UUV_ATT_CONTROL=n
 CONFIG_MODULES_UUV_POS_CONTROL=n
+CONFIG_MODULES_GIMBAL=n
 CONFIG_SYSTEMCMDS_SERIAL_TEST=n
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_TESTING=y
@@ -43,6 +43,7 @@ CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=6
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
@@ -21,6 +21,7 @@ CONFIG_MODULES_FW_POS_CONTROL=n
 CONFIG_MODULES_FW_POS_CONTROL_L1=n
 CONFIG_MODULES_ROVER_POS_CONTROL=n
 CONFIG_MODULES_SIH=n
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
 CONFIG_MODULES_UUV_ATT_CONTROL=n
 CONFIG_MODULES_UUV_POS_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
@@ -1,8 +1,10 @@
+# CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
 CONFIG_COMMON_HYGROMETERS=n
 CONFIG_COMMON_TELEMETRY=n
 CONFIG_DRIVERS_BATT_SMBUS=n
 CONFIG_DRIVERS_CAMERA_CAPTURE=n
 CONFIG_DRIVERS_CAMERA_TRIGGER=n
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=n
 CONFIG_DRIVERS_HEATER=n
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=n
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=n
@@ -1,3 +1,5 @@
+# CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=n
 CONFIG_COMMON_HYGROMETERS=n
 CONFIG_COMMON_TELEMETRY=n
 CONFIG_DRIVERS_ADC_ADS1115=n
@@ -1,6 +0,0 @@
-CONFIG_DRIVERS_HEATER=n
-CONFIG_DRIVERS_OSD=n
-CONFIG_DRIVERS_UAVCAN=n
-CONFIG_DRIVERS_UAVCAN_V1=y
-CONFIG_UAVCAN_V1_BMS_SUBSCRIBER=y
-CONFIG_UAVCAN_V1_UORB_SENSOR_GPS_SUBSCRIBER=y
@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""
@@ -0,0 +1,91 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS6"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS5"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
+CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_COMMON_BAROMETERS=y
+CONFIG_DRIVERS_BATT_SMBUS=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_HEATER=y
+CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_POWER_MONITOR_INA228=y
+CONFIG_DRIVERS_POWER_MONITOR_INA238=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_PWM_OUT_SIM=y
+CONFIG_DRIVERS_PX4IO=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_SIH=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_MIXER=y
+CONFIG_SYSTEMCMDS_MOTOR_TEST=y
+CONFIG_SYSTEMCMDS_MTD=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_PWM=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -0,0 +1,13 @@
+{
+    "board_id": 56,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the PX4FMUv6C board",
+    "image": "",
+    "build_time": 0,
+    "summary": "PX4FMUv6C",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1966080,
+    "git_identity": "",
+    "board_revision": 0
+}
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+
+param set-default BAT1_V_DIV 18.1
+param set-default BAT2_V_DIV 18.1
+
+param set-default BAT1_A_PER_V 36.367515152
+param set-default BAT2_A_PER_V 36.367515152
+
+# Mavlink ethernet (CFG 1000)
+param set-default MAV_2_CONFIG 1000
+param set-default MAV_2_BROADCAST 1
+param set-default MAV_2_MODE 0
+param set-default MAV_2_RADIO_CTL 0
+param set-default MAV_2_RATE 100000
+param set-default MAV_2_REMOTE_PRT 14550
+param set-default MAV_2_UDP_PRT 14550
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# PX4 FMUv6C specific board sensors init
+#------------------------------------------------------------------------------
+board_adc start
+
+# Internal SPI bus BMI055 accel/gyro
+bmi055 -A -R 4 -s start
+bmi055 -G -R 4 -s start
+
+# Internal SPI bus ICM42688p
+icm42688p -R 6 -s start
+
+# Internal barometer on I2C4
+ms5611 -I -b 4 -a 0x77 start
+
+# Internal compass on IMU I2C4
+ist8310 -I -b 4 -a 0xc -R 6 start
+
+# External compass on GPS/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
+ist8310 -X -b 1 -R 10 start
@@ -0,0 +1,17 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+config BOARD_HAS_PROBES
+	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
+	default y
+	---help---
+		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
+
+config BOARD_USE_PROBES
+	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
+	default n
+	depends on BOARD_HAS_PROBES
+
+	---help---
+		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.
@@ -0,0 +1,96 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/px4/fmu-v6c/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H753II=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0038
+CONFIG_CDCACM_PRODUCTSTR="PX4 BL FMU v6C.x"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3185
+CONFIG_CDCACM_VENDORSTR="Auterion"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_LIB_BOARDCTL=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_UART7=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_UART7_RXBUFSIZE=512
+CONFIG_UART7_RXDMA=y
+CONFIG_UART7_TXBUFSIZE=512
+CONFIG_UART7_TXDMA=y
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="bootloader_main"
@@ -0,0 +1,505 @@
+/************************************************************************************
+ * nuttx-configs/px4_fmu-v6c/include/board.h
+ *
+ *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
+ *   Authors: David Sidrane <david.sidrane@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#ifndef __NUTTX_CONFIG_PX4_FMU_V6C_INCLUDE_BOARD_H
+#define __NUTTX_CONFIG_PX4_FMU_V6C_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The px4_fmu-v6C  board provides the following clock sources:
+ *
+ *   X1: 16 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 16 MHz RC factory-trimmed
+ *   HSE: 16 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        16000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 16,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+#define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(60)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 60)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* FDCAN 1 2 clock source */
+
+#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
+ * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The PX4 FMUV6C board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+/* LED definitions ******************************************************************/
+/* The px4_fmu-v6c board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_LED3        2
+#define BOARD_NLEDS       3
+
+#define BOARD_LED_RED     BOARD_LED1
+#define BOARD_LED_GREEN   BOARD_LED2
+#define BOARD_LED_BLUE    BOARD_LED3
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_2    /* PA10 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_3    /* PB6 */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_1   /* PA3   */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2   /* PD5   */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9   */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8   */
+
+#define GPIO_UART5_RX    GPIO_UART5_RX_3    /* PD2  */
+#define GPIO_UART5_TX    GPIO_UART5_TX_3    /* PC12 */
+// GPIO_UART5_RTS   no remap                /* PC8  */
+// GPIO_UART5_CTS  No remap                 /* PC9  */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7 */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7  */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
+#define GPIO_UART7_RTS   GPIO_UART7_RTS_1   /* PE9  */
+#define GPIO_UART7_CTS   GPIO_UART7_CTS_1   /* PE10 */
+
+#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0 */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1 */
+
+
+/* CAN
+ *
+ * CAN1 is routed to transceiver.
+ * CAN2 is routed to transceiver.
+ */
+#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
+#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1  */
+#define GPIO_CAN2_RX     GPIO_CAN2_RX_2     /* PB5 */
+#define GPIO_CAN2_TX     GPIO_CAN2_TX_1     /* PB13  */
+
+/* SPI
+ * SPI1 is sensors
+ * SPI2 is FRAM
+ *
+ */
+
+#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
+
+#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
+#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5  */
+
+#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_2               /* PC2  */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_3               /* PC3  */
+#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_5) /* PD3  */
+
+/* I2C
+ *
+ *   The optional _GPIO configurations allow the I2C driver to manually
+ *   reset the bus to clear stuck slaves.  They match the pin configuration,
+ *   but are normally-high GPIOs.
+ *
+ */
+
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10 */
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11*/
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
+
+#define GPIO_I2C4_SCL GPIO_I2C4_SCL_1       /* PD12 */
+#define GPIO_I2C4_SDA GPIO_I2C4_SDA_1       /* PD13 */
+
+#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN12)
+#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN13)
+
+/* SDMMC2
+ *
+ *      VDD 3.3
+ *      GND
+ *      SDMMC2_CK                           PD6
+ *      SDMMC2_CMD                          PD7
+ *      SDMMC2_D0                           PB14
+ *      SDMMC2_D1                           PB15
+ *      SDMMC2_D2                           PB3
+ *      SDMMC2_D3                           PB4
+ */
+
+#define GPIO_SDMMC2_CK   GPIO_SDMMC2_CK_1  /* PD6  */
+#define GPIO_SDMMC2_CMD  GPIO_SDMMC2_CMD_1 /* PD7  */
+//      GPIO_SDMMC2_D0   No Remap          /* PB14 */
+//      GPIO_SDMMC2_D1   No Remap          /* PB15 */
+#define GPIO_SDMMC2_D2   GPIO_SDMMC2_D2_2  /* PB3  */
+//      GPIO_SDMMC2_D3    No Remap         /* PB4  */
+
+/* USB
+ *
+ *      OTG_FS_DM                           PA11
+ *      OTG_FS_DP                           PA12
+ *      VBUS                                PA9
+ */
+
+
+/* Board provides GPIO or other Hardware for signaling to timing analyzer */
+
+#if defined(CONFIG_BOARD_USE_PROBES)
+# include "stm32_gpio.h"
+# define PROBE_N(n) (1<<((n)-1))
+# define PROBE_1    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)   /* PA8  AUX1 */
+# define PROBE_2    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)  /* PE11 AUX2 */
+# define PROBE_3    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN13)  /* PE13 AUX3 */
+# define PROBE_4    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN14)  /* PE14 AUX4 */
+# define PROBE_5    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)  /* PD14 AUX5 */
+# define PROBE_6    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)  /* PD15 AUX6 */
+# define PROBE_7    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)   /* PA0  AUX7 */
+# define PROBE_8    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN2)   /* PA1  AUX8 */
+
+# define PROBE_INIT(mask) \
+	do { \
+		if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
+		if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
+		if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
+		if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
+		if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
+		if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
+		if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
+		if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
+	} while(0)
+
+# define PROBE(n,s)  do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
+# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
+#else
+# define PROBE_INIT(mask)
+# define PROBE(n,s)
+# define PROBE_MARK(n)
+#endif
+
+#endif  /*__NUTTX_CONFIG_PX4_FMU_V6C_INCLUDE_BOARD_H  */
@@ -0,0 +1,79 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     /* 1 DMA1:37 BMI055, ICM-42688-P */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     /* 2 DMA1:38 BMI055, ICM-42688-P  */
+
+#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0     /* 3 DMA1:39 FRAM */
+#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0     /* 4 DMA1:40 FRAM */
+
+//#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
+//#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
+
+//#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_0 /*  DMA1:43 Telem3 */
+//#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0 /*  DMA1:44 Telem3 */
+
+//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
+//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
+
+//#define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 EXT2 */
+//#define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 EXT2 */
+
+#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   /* 5 DMA1:71 PX4IO */
+#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   /* 6 DMA1:72 PX4IO */
+
+// Assigned in timer_config.cpp
+
+// Timer 4                                          /* 7 DMA1:32 TIM4UP */
+// Timer 5                                          /* 8 DMA1:50 TIM5UP */
+
+// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
+//                                                     V
+
+
+#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
+#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
+
+#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
+#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66  TELEM2 */
+
+#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79  TELEM1 */
+#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80  TELEM1 */
+
+//#define DMAMAP_UART8_RX   DMAMAP_DMA12_UART8RX_1  /*  DMA1:81  GPS2 */
+//#define DMAMAP_UART8_TX   DMAMAP_DMA12_UART8TX_1  /*  DMA1:82  GPS2 */
@@ -0,0 +1,241 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/px4/fmu-v6c/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95751
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0038
+CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v6C.x"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3185
+CONFIG_CDCACM_VENDORSTR="Auterion"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_IOB_NBUFFERS=24
+CONFIG_IOB_NCHAINS=24
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_IOB=y
+CONFIG_MM_REGIONS=4
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C4=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_HSECLOCK=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC2=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI1_DMA=y
+CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI2_DMA=y
+CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
+CONFIG_STM32H7_SPI_DMA=y
+CONFIG_STM32H7_TIM12=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM5=y
+CONFIG_STM32H7_UART5=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART5_IFLOWCONTROL=y
+CONFIG_UART5_OFLOWCONTROL=y
+CONFIG_UART5_RXDMA=y
+CONFIG_UART5_TXBUFSIZE=3000
+CONFIG_UART5_TXDMA=y
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_IFLOWCONTROL=y
+CONFIG_UART7_OFLOWCONTROL=y
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_RXDMA=y
+CONFIG_UART7_TXBUFSIZE=3000
+CONFIG_UART7_TXDMA=y
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=1500
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_TXBUFSIZE=3000
+CONFIG_USART3_BAUD=57600
+CONFIG_USART3_RXBUFSIZE=180
+CONFIG_USART3_RXDMA=y
+CONFIG_USART3_SERIAL_CONSOLE=y
+CONFIG_USART3_TXBUFSIZE=1500
+CONFIG_USART3_TXDMA=y
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y
+CONFIG_WQUEUE_NOTIFIER=y
@@ -0,0 +1,215 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The PX4 FMUV6C uses an STM32H753II has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The PX4 FMUV6C has a test point on board, the BOOT0 pin is at ground so by
+ * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
+ * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743II also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The bootloader uses the first sector of the flash, which is 128K in length.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH =  128K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
--- a/Show More
+++ b/Show More