Showcase clang-format google style

Remove the entire external yaw handler, dynamic memory allocation,
pointer passing logic. Directly instanciate the weather vane instance
in the flight tasks that support it.

.ci/Jenkinsfile-compile

@@ -28,7 +28,7 @@ pipeline {
           ]
 
           def base_builds = [
-            target: ["px4_sitl_rtps"],
+            target: ["px4_sitl_default"],
             image: docker_images.base,
             archive: false
           ]
@@ -52,25 +52,29 @@ pipeline {
                      "cuav_x7pro_default",
                      "cubepilot_cubeorange_default",
                      "cubepilot_cubeyellow_default",
+                     "diatone_mamba-f405-mk2_default",
                      "freefly_can-rtk-gps_canbootloader",
                      "freefly_can-rtk-gps_default",
                      "holybro_can-gps-v1_canbootloader",
                      "holybro_can-gps-v1_default",
                      "holybro_durandal-v1_default",
                      "holybro_kakutef7_default",
+                     "holybro_kakuteh7_default",
                      "holybro_pix32v5_default",
-                     "matek_h743-slim",
                      "matek_gnss-m9n-f4_canbootloader",
                      "matek_gnss-m9n-f4_default",
+                     "matek_h743-mini_default",
+                     "matek_h743-slim_default",
+                     "matek_h743_default",
                      "modalai_fc-v1_default",
                      "modalai_fc-v1_rtps",
                      "modalai_fc-v2_default",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7_default",
-                     "mro_ctrl-zero-h7_rtps",
                      "mro_ctrl-zero-h7-oem_default",
                      "mro_ctrl-zero-h7-oem_rtps",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7_rtps",
                      "mro_pixracerpro_default",
                      "mro_pixracerpro_rtps",
                      "mro_x21-777_default",
@@ -85,24 +89,28 @@ pipeline {
                      "nxp_ucans32k146_canbootloader",
                      "nxp_ucans32k146_default",
                      "omnibus_f4sd_default",
-                     "raspberrypi_pico_default",
                      "px4_fmu-v2_default",
                      "px4_fmu-v2_fixedwing",
+                     "px4_fmu-v2_lto",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
                      "px4_fmu-v3_default",
                      "px4_fmu-v4_default",
                      "px4_fmu-v4pro_default",
+                     "px4_fmu-v5_cyphal",
                      "px4_fmu-v5_debug",
                      "px4_fmu-v5_default",
+                     "px4_fmu-v5_lto",
                      "px4_fmu-v5_rtps",
                      "px4_fmu-v5_stackcheck",
                      "px4_fmu-v5_uavcanv0periph",
-                     "px4_fmu-v5_uavcanv1",
                      "px4_fmu-v5x_default",
+                     "px4_fmu-v6c_default",
                      "px4_fmu-v6u_default",
                      "px4_fmu-v6x_default",
                      "px4_io-v2_default",
+                     "raspberrypi_pico_default",
+                     "sky-drones_smartap-airlink_default",
                      "spracing_h7extreme_default",
                      "uvify_core_default"
             ],

.ci/Jenkinsfile-hardware

@@ -705,18 +705,21 @@ void quickCalibrate() {
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 2"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 2"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'
 
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate baro; sleep 5"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_BARO*"'
+
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
 }
@@ -791,7 +794,7 @@ void resetParameters() {
 void runTests() {
 
   // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
 
   resetParameters()
 
@@ -806,6 +809,9 @@ void runTests() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
 
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
+
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
@@ -861,12 +867,15 @@ void printTopics() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'

.clang-format

@@ -0,0 +1,13 @@
+# Google C++ style as base
+Language: Cpp
+BasedOnStyle: Google
+
+# Indentation using tabs
+UseTab: ForContinuationAndIndentation
+TabWidth: 8
+IndentWidth: 8
+ContinuationIndentWidth: 8
+ConstructorInitializerIndentWidth: 8
+AccessModifierOffset: -8
+
+ColumnLimit: 120 # Allow more collumns

.github/ISSUE_TEMPLATE/1_Bug_report.md

@@ -1,32 +1,34 @@
 ---
-name: Bug report
+name: 🐛 Bug report
 about: Create a report to help us improve
+labels: bug-report
 
 ---
 
-**Describe the bug**
+## Describe the bug
 A clear and concise description of the bug.
 
-**To Reproduce**
+## To Reproduce
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error
 
-**Expected behavior**
+## Expected behavior
 A clear and concise description of what you expected to happen.
 
-**Log Files and Screenshots**
+## Log Files and Screenshots
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
-- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).
+- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
+- Share the link to the log (Copy and paste the URL of the log)
 
 Add screenshots to help explain your problem.
 
-**Drone (please complete the following information):**
+## Drone (please complete the following information):
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.
 
-**Additional context**
+## Additional context
 Add any other context about the problem here.

.github/ISSUE_TEMPLATE/2_Feature_request.md

@@ -1,19 +1,20 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
+labels: feature-request
 
 ---
 
 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
 
-**Describe problem solved by the proposed feature**
+## Describe problem solved by the proposed feature
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
 
-**Describe your preferred solution**
+## Describe your preferred solution
 A clear and concise description of what you want to happen.
 
-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.
 
-**Additional context**
+## Additional context
 Add any other context or screenshots for the feature request here.

.github/ISSUE_TEMPLATE/3_Support_question.md

@@ -1,10 +1,13 @@
 ---
 name: ⛔ Support Question
-about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.
+about: See http://discuss.px4.io/ for questions about using PX4.
 
 ---
 
-We use GitHub issues only to discuss PX4 bugs and new features. For
-questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).
+## Attention! Please read the note below
+
+We use GitHub issues only to discuss PX4 bugs and new features.
+
+**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
 
 Thanks!

.github/ISSUE_TEMPLATE/4_Documentation_issue.md

@@ -1,9 +1,11 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/Devguide for documentation issues
+about: See https://github.com/PX4/px4_user_guide for documentation issues
 
 ---
 
-PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).
+## Attention! Please read the note below
+
+**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
 
 Thanks!

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.
 
-**Describe problem solved by this pull request**
-A clear and concise description of the problem this proposed change will solve.
+## Describe problem solved by this pull request
+A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
 E.g. For this use case I ran into...
 
-**Describe your solution**
+## Describe your solution
 A clear and concise description of what you have implemented.
 
-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.
 
-**Test data / coverage**
+## Test data / coverage
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.
 
-**Additional context**
+## Additional context
 Add any other related context or media.

.github/workflows/compile_nuttx.yml

@@ -20,6 +20,7 @@ jobs:
           ark_can-flow,
           ark_can-gps,
           ark_can-rtk-gps,
+          ark_cannode,
           atl_mantis-edu,
           av_x-v1,
           bitcraze_crazyflie,
@@ -29,14 +30,17 @@ jobs:
           cuav_x7pro,
           cubepilot_cubeorange,
           cubepilot_cubeyellow,
+          diatone_mamba-f405-mk2,
           freefly_can-rtk-gps,
           holybro_can-gps-v1,
           holybro_durandal-v1,
           holybro_kakutef7,
           holybro_kakuteh7,
           holybro_pix32v5,
-          matek_h743-slim,
           matek_gnss-m9n-f4,
+          matek_h743,
+          matek_h743-mini,
+          matek_h743-slim,
           modalai_fc-v1,
           modalai_fc-v2,
           mro_ctrl-zero-f7,
@@ -51,15 +55,17 @@ jobs:
           nxp_fmurt1062-v1,
           nxp_ucans32k146,
           omnibus_f4sd,
-          raspberrypi_pico,
           px4_fmu-v2,
           px4_fmu-v3,
           px4_fmu-v4,
           px4_fmu-v4pro,
           px4_fmu-v5,
           px4_fmu-v5x,
+          px4_fmu-v6c,
           px4_fmu-v6u,
           px4_fmu-v6x,
+          raspberrypi_pico,
+          sky-drones_smartap-airlink,
           spracing_h7extreme,
           uvify_core
           ]

.github/workflows/sitl_tests.yml

@@ -29,9 +29,9 @@ jobs:
         token: ${{ secrets.ACCESS_TOKEN }}
 
     - name: Download MAVSDK
-      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
     - name: Install MAVSDK
-      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp

.gitmodules

@@ -24,26 +24,26 @@
 	branch = master
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
-	url = https://github.com/JacobCrabill/incubator-nuttx.git
-	branch = dev/stm32h7-socketcan
+	url = https://github.com/PX4/NuttX.git
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
-	url = git@github.com:JacobCrabill/incubator-nuttx-apps.git
-	branch = dev/nuttx-10.2.0
+	url = https://github.com/PX4/NuttX-apps.git
+	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/uavcan_v1/libcanard"]
-	path = src/drivers/uavcan_v1/libcanard
-	url = https://github.com/UAVCAN/libcanard.git
-[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
-	path = src/drivers/uavcan_v1/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types.git
-[submodule "src/drivers/uavcan_v1/legacy_data_types"]
-	path = src/drivers/uavcan_v1/legacy_data_types
+[submodule "src/drivers/cyphal/libcanard"]
+	path = src/drivers/cyphal/libcanard
+	url = https://github.com/opencyphal/libcanard.git
+[submodule "src/drivers/cyphal/public_regulated_data_types"]
+	path = src/drivers/cyphal/public_regulated_data_types
+	url = https://github.com/opencyphal/public_regulated_data_types.git
+[submodule "src/drivers/cyphal/legacy_data_types"]
+	path = src/drivers/cyphal/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -64,3 +64,6 @@
 	path = src/lib/crypto/libtommath
 	url = https://github.com/PX4/libtommath.git
 	branch = px4
+[submodule "src/modules/microdds_client/Micro-XRCE-DDS-Client"]
+	path = src/modules/microdds_client/Micro-XRCE-DDS-Client
+	url = https://github.com/eProsima/Micro-XRCE-DDS-Client.git

.vscode/.gitignore

@@ -9,3 +9,5 @@ launch.json
 ipch/
 
 browse.vc.db*
+
+*.log

.vscode/cmake-variants.yaml

@@ -121,6 +121,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-rtk-gps_canbootloader
+    ark_cannode_default:
+      short: ark_cannode_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_cannode_default
+    ark_cannode_canbootloader:
+      short: ark_cannode_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_cannode_canbootloader
     atl_mantis-edu_default:
       short: atl_mantis-edu
       buildType: MinSizeRel

.vscode/settings.json

@@ -126,8 +126,6 @@
         },
         "search.showLineNumbers": true,
         "telemetry.enableTelemetry": false,
-        "terminal.integrated.copyOnSelection": true,
-        "terminal.integrated.rightClickBehavior": "paste",
         "terminal.integrated.scrollback": 5000,
         "window.title": "${dirty} ${activeEditorMedium}${separator}${rootName}",
         "workbench.editor.highlightModifiedTabs": true,

CMakeLists.txt

@@ -99,7 +99,7 @@
 #
 #=============================================================================
 
-cmake_minimum_required(VERSION 3.2 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
 
 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -234,6 +234,14 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)
 
+# Check if LTO option and check if toolchain supports it
+if(LTO)
+    include(CheckIPOSupported)
+    check_ipo_supported()
+    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
+    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
+endif()
+
 set(package-contact "px4users@googlegroups.com")
 
 set(CMAKE_CXX_STANDARD 14)

Kconfig

@@ -51,6 +51,13 @@ menu "Toolchain"
         string "Architecture"
         default ""
 
+    config BOARD_LTO
+        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
+        default n
+        help
+            Enables LTO flag in linker
+            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
+
     config BOARD_FULL_OPTIMIZATION
         bool "Full optmization (O3)"
         default n

Makefile

@@ -325,12 +325,13 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v5x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6x/extras/px4_io-v2_default.bin
+	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/px4/fmu-v6c/extras/px4_io-v2_default.bin
 	# cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeorange/extras/cubepilot_io-v2_default.bin
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 
 .PHONY: coverity_scan
@@ -374,6 +375,10 @@ format:
 	$(call colorecho,'Formatting with astyle')
 	@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh --fix
 
+format_clang:
+	$(call colorecho,'Formatting with clang-format')
+	@"$(SRC_DIR)"/Tools/astyle/files_to_check_code_style.sh | xargs clang-format -i -style=file
+
 # Testing
 # --------------------------------------------------------------------
 .PHONY: tests tests_coverage tests_mission tests_mission_coverage tests_offboard tests_avoidance

ROMFS/cannode/init.d/rcS

@@ -86,10 +86,28 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial
 
 # Check for flow sensor
-if param compare SENS_EN_PX4FLOW 1
+if param compare -s SENS_EN_PX4FLOW 1
 then
-	px4flow start -X
+	px4flow start -X &
 fi
 
+if param compare -s IMU_GYRO_CAL_EN 1
+then
+	gyro_calibration start
+fi
+
+
+if param compare -s MBE_ENABLE 1
+then
+	# conservative mag bias estimation
+	param set-default MBE_LEARN_GAIN 5
+	param set-default IMU_GYRO_CUTOFF 20
+	mag_bias_estimator start
+fi
+
+param set-default SENS_MAG_RATE 100
+
+sensors start
+
 uavcannode start
 unset R

ROMFS/px4fmu_common/init.d-posix/airframes/10019_omnicopter

@@ -0,0 +1,101 @@
+#!/bin/sh
+#
+# @name 6DoF Omnicopter SITL
+#
+# @type Quadrotor Wide
+#
+# @maintainer Jaeyoung Lim <jalim@ethz.ch>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default SYS_CTRL_ALLOC 1
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 255
+
+param set-default CA_ROTOR0_PX 0.14435
+param set-default CA_ROTOR0_PY -0.14435
+param set-default CA_ROTOR0_PZ -0.14435
+param set-default CA_ROTOR0_KM 0.05 # CCW
+param set-default CA_ROTOR0_AX -0.788675
+param set-default CA_ROTOR0_AY -0.211325
+param set-default CA_ROTOR0_AZ -0.57735
+
+param set-default CA_ROTOR1_PX -0.14435
+param set-default CA_ROTOR1_PY -0.14435
+param set-default CA_ROTOR1_PZ -0.14435
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR1_AX 0.211325
+param set-default CA_ROTOR1_AY -0.788675
+param set-default CA_ROTOR1_AZ 0.57735
+
+param set-default CA_ROTOR2_PX 0.14435
+param set-default CA_ROTOR2_PY 0.14435
+param set-default CA_ROTOR2_PZ -0.14435
+param set-default CA_ROTOR2_KM 0.05
+param set-default CA_ROTOR2_AX -0.211325
+param set-default CA_ROTOR2_AY 0.788675
+param set-default CA_ROTOR2_AZ 0.57735
+
+param set-default CA_ROTOR3_PX -0.14435
+param set-default CA_ROTOR3_PY 0.14435
+param set-default CA_ROTOR3_PZ -0.14435
+param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR3_AX 0.788675
+param set-default CA_ROTOR3_AY 0.211325
+param set-default CA_ROTOR3_AZ -0.57735
+
+param set-default CA_ROTOR4_PX 0.14435
+param set-default CA_ROTOR4_PY -0.14435
+param set-default CA_ROTOR4_PZ 0.14435
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR4_AX 0.788675
+param set-default CA_ROTOR4_AY 0.211325
+param set-default CA_ROTOR4_AZ -0.57735
+
+param set-default CA_ROTOR5_PX -0.14435
+param set-default CA_ROTOR5_PY -0.14435
+param set-default CA_ROTOR5_PZ 0.14435
+param set-default CA_ROTOR5_KM 0.05
+param set-default CA_ROTOR5_AX -0.211325
+param set-default CA_ROTOR5_AY 0.788675
+param set-default CA_ROTOR5_AZ 0.57735
+
+param set-default CA_ROTOR6_PX 0.14435
+param set-default CA_ROTOR6_PY 0.14435
+param set-default CA_ROTOR6_PZ 0.14435
+param set-default CA_ROTOR6_KM 0.05
+param set-default CA_ROTOR6_AX 0.211325
+param set-default CA_ROTOR6_AY -0.788675
+param set-default CA_ROTOR6_AZ 0.57735
+
+param set-default CA_ROTOR7_PX -0.14435
+param set-default CA_ROTOR7_PY 0.14435
+param set-default CA_ROTOR7_PZ 0.14435
+param set-default CA_ROTOR7_KM 0.05
+param set-default CA_ROTOR7_AX -0.788675
+param set-default CA_ROTOR7_AY -0.211325
+param set-default CA_ROTOR7_AZ -0.57735
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+param set-default PWM_MAIN_FUNC7 107
+param set-default PWM_MAIN_FUNC8 108
+
+# disable MC desaturation which improves attitude tracking
+param set-default CA_METHOD 0
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+set MIXER skip
+set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/10040_quadx

@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name QuadrotorX SITL for SIH
+#
+# @type Quadrotor
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+set MIXER quad_x
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set SIH_VEHICLE_TYPE 0

ROMFS/px4fmu_common/init.d-posix/airframes/10041_airplane

@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name Plane SITL for SIH
+#
+# @type Plane
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER AERT
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 6.0
+param set SIH_MASS 0.3
+param set SIH_IXX 0.00402
+param set SIH_IYY 0.0144
+param set SIH_IZZ 0.0177
+param set SIH_IXZ 0.00046
+param set SIH_KDV 0.2
+
+param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
+param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)

ROMFS/px4fmu_common/init.d-posix/airframes/10042_xvert

@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name SIH Tailsitter Duo
+#
+# @type VTOL
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 0
+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.3
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default MAV_TYPE 19
+set MAV_TYPE 19
+set MIXER vtol_tailsitter_duo_sat
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0.0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.145
+
+# sih as tailsitter
+param set SIH_VEHICLE_TYPE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -18,3 +18,7 @@ param set-default LPE_FAKE_ORIGIN 1
 
 param set-default MPC_ALT_MODE 2
 
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -10,6 +10,7 @@
 # enable fusion of landing target velocity
 param set-default LTEST_MODE 1
 param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2
 
 # Start up Landing Target Estimator module
 landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -9,7 +9,6 @@
 
 # EKF2
 param set-default EKF2_AID_MASK 2
-param set-default SENS_FLOW_ROT 0
 
 # LPE: Flow-only mode
 param set-default LPE_FUSION 242

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -25,6 +25,8 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
 
+param set-default FW_SPOILERS_LND 0.4
+
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -7,6 +7,11 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+# TODO: Enable motor failure detection when the
+# VTOL no longer reports 0A for all ESCs in SITL
+param set-default FD_ACT_EN 0
+param set-default FD_ACT_MOT_TOUT 500
+
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2
 
@@ -71,7 +76,6 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -70,7 +70,6 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FW_DIFTHR_EN 1
 param set-default VT_FW_DIFTHR_SC 0.5

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -9,7 +9,7 @@
 
 param set-default MAV_TYPE 21
 
-# param set-default SYS_CTRL_ALLOC 1
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3
 
 param set-default CA_ROTOR_COUNT 4
@@ -27,9 +27,7 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
-param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -82,7 +80,6 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80
 
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -38,7 +38,6 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
-param set-default NAV_LOITER_RAD 80
 
 param set-default VT_FWD_THRUST_EN 4
 param set-default VT_F_TRANS_THR 0.75

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc.post

@@ -1,6 +1,4 @@
 
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
 
 # shellcheck disable=SC2154

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -35,8 +35,12 @@ px4_add_romfs_files(
 	10016_iris
 	10017_iris_ctrlalloc
 	10018_iris_foggy_lidar
+	10019_omnicopter
 	10020_if750a
 	10030_px4vision
+	10040_quadx
+	10041_airplane
+	10042_xvert
 	1010_iris_opt_flow
 	1010_iris_opt_flow.post
 	1011_iris_irlock

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -30,3 +30,12 @@ mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $ud
 
 # Onboard link to gimbal
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
+
+# To display for SIH sitl
+if [ "$SIM_MODE" = "sihsim" ]; then
+	udp_sihsim_port_local=$((19450+px4_instance))
+	udp_sihsim_port_remote=$((19410+px4_instance))
+	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote
+	mavlink stream -r 200 -s HIL_ACTUATOR_CONTROLS -u  $udp_sihsim_port_local
+	mavlink stream -r 25 -s HIL_STATE_QUATERNION -u  $udp_sihsim_port_local
+fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -95,10 +95,9 @@ fi
 
 if param compare SYS_AUTOCONFIG 1
 then
+	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
-
-	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
-	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi
 
 # multi-instance setup
@@ -155,6 +154,8 @@ param set-default SDLOG_DIRS_MAX 7
 
 param set-default TRIG_INTERFACE 3
 
+param set-default SYS_FAILURE_EN 1
+
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_DL_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 10" | bc)
@@ -196,14 +197,6 @@ fi
 
 . "$autostart_file"
 
-#
-# If autoconfig parameter was set, reset it and save parameters.
-#
-if [ $AUTOCNF = yes ]
-then
-	param set SYS_AUTOCONFIG 0
-fi
-
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250
 
@@ -211,8 +204,11 @@ param set IMU_INTEG_RATE 250
 . px4-rc.params
 
 dataman start
+# start sih in sih_sim mode, otherwise simulator module
+if [ "$SIM_MODE" = "sihsim" ]; then
+	sih start
 # only start the simulator if not in replay mode, as both control the lockstep time
-if ! replay tryapplyparams
+elif ! replay tryapplyparams
 then
   . px4-rc.simulator
 fi
@@ -223,6 +219,13 @@ rc_update start
 manual_control start
 sensors start
 commander start
+
+# Configure vehicle type specific parameters.
+# Note: rc.vehicle_setup is the entry point for rc.interface,
+#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+#
+. ${R}etc/init.d/rc.vehicle_setup
+
 navigator start
 
 # Try to start the micrortps_client with UDP transport if module exists
@@ -252,12 +255,6 @@ then
 	gyro_calibration start
 fi
 
-# Configure vehicle type specific parameters.
-# Note: rc.vehicle_setup is the entry point for rc.interface,
-#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-#
-. ${R}etc/init.d/rc.vehicle_setup
-
 #user defined mavlink streams for instances can be in PATH
 . px4-rc.mavlink
 

ROMFS/px4fmu_common/init.d/airframes/1000_rc_fw_easystar.hil

@@ -61,6 +61,8 @@ param set-default HIL_ACT_FUNC6 400
 
 param set SYS_HITL 1
 
+param set UAVCAN_ENABLE 0
+
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848

ROMFS/px4fmu_common/init.d/airframes/10017_steadidrone_qu4d

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone QU4D
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 feed-through of RC AUX1 channel
-# @output MAIN6 feed-through of RC AUX2 channel
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 4
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.13
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.004
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.19
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.004
-param set-default MC_YAW_P 4
-
-set MIXER quad_w

ROMFS/px4fmu_common/init.d/airframes/1001_rc_quad_x.hil

@@ -15,6 +15,8 @@ set MIXER quad_x
 
 param set SYS_HITL 1
 
+param set UAVCAN_ENABLE 0
+
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_ROTOR0_PY 0.15

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -49,7 +49,6 @@ param set-default MPC_Z_VEL_MAX_DN 1.5
 
 param set-default NAV_ACC_RAD 5
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 80
 
 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30
@@ -95,6 +94,8 @@ param set-default HIL_ACT_FUNC8 203
 
 param set SYS_HITL 1
 
+param set UAVCAN_ENABLE 0
+
 # disable some checks to allow to fly
 # - with usb
 param set-default CBRK_USB_CHK 197848

ROMFS/px4fmu_common/init.d/airframes/12002_steadidrone_mavrik

@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone MAVRIK
-#
-# @type Octo Coax Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 motor 5
-# @output MAIN6 motor 6
-# @output MAIN7 motor 7
-# @output MAIN8 motor 8
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default MC_PITCH_P 4
-param set-default MC_PITCHRATE_P 0.24
-param set-default MC_PITCHRATE_I 0.09
-param set-default MC_PITCHRATE_D 0.013
-param set-default MC_PITCHRATE_MAX 180
-
-param set-default MC_ROLL_P 4
-param set-default MC_ROLLRATE_P 0.16
-param set-default MC_ROLLRATE_I 0.07
-param set-default MC_ROLLRATE_D 0.009
-param set-default MC_ROLLRATE_MAX 180
-
-param set-default MC_YAW_P 3
-
-param set-default MPC_HOLD_MAX_XY 0.25
-param set-default MPC_THR_MIN 0.15
-param set-default MPC_Z_VEL_MAX_DN 2
-
-param set-default BAT1_N_CELLS 4
-
-set MIXER octo_cox_w
-
-set PWM_OUT 12345678

ROMFS/px4fmu_common/init.d/airframes/13004_quad+_tailsitter

@@ -7,8 +7,8 @@
 #
 # @output MAIN1 motor 1
 # @output MAIN2 motor 2
-# @output MAIN3 motor 4
-# @output MAIN4 motor 5
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
 # @output MAIN5 elevon left
 # @output MAIN6 elevon right
 # @output MAIN7 canard surface

ROMFS/px4fmu_common/init.d/airframes/13010_claire

@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# @name CruiseAder Claire
-#
-# @type VTOL Tiltrotor
-# @class VTOL
-#
-# @maintainer Samay Siga <samay_s@icloud.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-defualt MAV_TYPE 21
-
-param set-default PWM_AUX_DISARM 1000
-param set-default PWM_AUX_MAX 2000
-param set-default PWM_AUX_MIN 1000
-param set-default PWM_AUX_RATE 50
-
-param set-default PWM_MAIN_MAX 2000
-
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 13
-param set-default VT_IDLE_PWM_MC 1080
-param set-default VT_TILT_FW 0.9
-param set-default VT_TILT_MC 0.08
-param set-default VT_TILT_TRANS 0.5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 1
-
-set MIXER claire
-set MIXER_AUX claire
-
-set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13012_convergence

@@ -22,7 +22,7 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-param set-defualt MAV_TYPE 21
+param set-default MAV_TYPE 21
 
 param set-default CBRK_AIRSPD_CHK 162128
 
@@ -69,4 +69,9 @@ param set-default VT_TYPE 1
 
 set MIXER vtol_convergence
 
-set PWM_OUT 1234
+if ! ver hwcmp MATEK_H743
+then
+	set PWM_OUT 1234
+else
+	set PWM_OUT 3456
+fi	

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -131,7 +131,6 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
-param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4
 

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -62,7 +62,7 @@ param set-default MPC_JERK_AUTO 4
 param set-default MPC_LAND_SPEED 1
 param set-default MPC_MAN_TILT_MAX 25
 param set-default MPC_MAN_Y_MAX 40
-param set-default MPC_SPOOLUP_TIME 1.5
+param set-default COM_SPOOLUP_TIME 1.5
 param set-default MPC_THR_HOVER 0.45
 param set-default MPC_TILTMAX_AIR 25
 param set-default MPC_TKO_RAMP_T 1.8

ROMFS/px4fmu_common/init.d/airframes/3030_io_camflyer

@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name IO Camflyer
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_TRIM 13
-param set-default FW_R_TC 0.3
-param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.74
-param set-default FW_L1_PERIOD 16
-param set-default FW_LND_ANG 15
-param set-default FW_LND_FLALT 5
-param set-default FW_LND_HVIRT 13
-param set-default FW_LND_TLALT 5
-param set-default FW_THR_LND_MAX 0
-param set-default FW_PR_FF 0.35
-param set-default FW_RR_FF 0.6
-param set-default FW_RR_P 0.04
-
-param set-default PWM_MAIN_DISARM 1000
-
-
-set MIXER fw_generic_wing
-
-# Provide ESC a constant 1000 us pulse while disarmed
-set PWM_OUT 4

ROMFS/px4fmu_common/init.d/airframes/3034_fx79

@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# @name FX-79 Buffalo Flying Wing
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 right aileron
-# @output MAIN2 left aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 30
-param set-default FW_AIRSPD_MIN 13
-
-param set-default NAV_LOITER_RAD 150
-
-set MIXER fw_generic_wing

ROMFS/px4fmu_common/init.d/airframes/3035_viper

@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name Viper
-#
-# @type Flying Wing
-# @class Plane
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER Viper

ROMFS/px4fmu_common/init.d/airframes/3037_parrot_disco_mod

@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-# @name Modified Parrot Disco
-#
-# @url
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-####################################
-# Airspeed
-####################################
-param set-default FW_AIRSPD_MAX  27 # = 52 knots
-
-####################################
-# Pitch
-####################################
-
-# Pitch rate feed forward (def = 0.5 %/rad/sec)
-param set-default FW_PR_FF 0.35
-
-####################################
-# Roll
-####################################
-
-# Basic limits (def = 50 deg)
-param set-default FW_R_LIM 40
-
-# Roll rate upper limit (def = 70 deg/s)
-param set-default FW_R_RMAX 50
-
-param set-default PWM_MAIN_DISARM 1000
-
-set MIXER fw_generic_wing.main.mix
-
-# Provide ESC a constant 1000 us pulse
-set PWM_OUT 4

ROMFS/px4fmu_common/init.d/airframes/4010_dji_f330

@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F330 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230

ROMFS/px4fmu_common/init.d/airframes/4011_dji_f450

@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F450 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_YAWRATE_P 0.3
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -104,7 +104,6 @@ param set-default SDLOG_PROFILE 131
 param set-default SENS_CM8JL65_CFG 104
 param set-default SENS_FLOW_MAXHGT 25
 param set-default SENS_FLOW_MINHGT 0.5
-param set-default SENS_FLOW_ROT 0
 param set-default IMU_GYRO_CUTOFF 100
 param set-default SENS_EN_PMW3901 1
 

ROMFS/px4fmu_common/init.d/airframes/4060_dji_matrice_100

@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# @name DJI Matrice 100
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer James Goppert <james.goppert@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 6
-
-param set-default MC_ROLLRATE_P 0.05
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_PITCHRATE_P 0.05
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.001
-
-param set-default MC_YAWRATE_I 0
-
-param set-default PWM_MAIN_MIN 1200

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -47,6 +47,7 @@ param set-default COM_RC_LOSS_T 3
 
 # ekf2
 param set-default EKF2_AID_MASK 33
+param set-default EKF2_TERR_MASK 1
 param set-default EKF2_BARO_DELAY 0
 param set-default EKF2_BARO_NOISE 2.0
 
@@ -173,7 +174,7 @@ param set-default RC1_TRIM          1000
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
 param set-default SENS_FLOW_MAXHGT 5.0
-param set-default SENS_FLOW_ROT    0
+param set-default SENS_FLOW_ROT 0
 
 # ignore the SD card errors and use normal startup sound
 set STARTUP_TUNE "1"

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -52,22 +52,16 @@ px4_add_romfs_files(
 
 	# [3000, 3999] Flying wing"
 	3000_generic_wing
-	3030_io_camflyer
 	3031_phantom
 	3032_skywalker_x5
 	3033_wingwing
-	3034_fx79
-	3035_viper
 	3036_pigeon
-	3037_parrot_disco_mod
 	3100_tbs_caipirinha
 
 	# [4000, 4999] Quadrotor x"
 	4001_quad_x
 	4003_qavr5
 	4009_qav250
-	4010_dji_f330
-	4011_dji_f450
 	4014_s500
 	4015_holybro_s500
 	4016_holybro_px4vision
@@ -81,7 +75,6 @@ px4_add_romfs_files(
 	4051_s250aq
 	4052_holybro_qav250
 	4053_holybro_kopis2
-	4060_dji_matrice_100
 	4061_atl_mantis_edu
 	4071_ifo
 	4072_draco
@@ -112,7 +105,6 @@ px4_add_romfs_files(
 	# [10000, 10999] Quadrotor Wide arm / H frame"
 	10015_tbs_discovery
 	10016_3dr_iris
-	10017_steadidrone_qu4d
 	10018_tbs_endurance
 
 	# [11000, 11999] Hexa Cox
@@ -120,7 +112,6 @@ px4_add_romfs_files(
 
 	# [12000, 12999] Octo Cox
 	12001_octo_cox
-	12002_steadidrone_mavrik
 
 	# [13000, 13999] VTOL
 	13000_generic_vtol_standard
@@ -133,7 +124,6 @@ px4_add_romfs_files(
 	13007_vtol_AAVVT_quad
 	13008_QuadRanger
 	13009_vtol_spt_ranger
-	13010_claire
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -16,8 +16,6 @@ param set-default MAV_TYPE 1
 param set-default COM_POS_FS_DELAY 5
 param set-default COM_POS_FS_EPH 15
 param set-default COM_POS_FS_EPV 30
-param set-default COM_POS_FS_GAIN 0
-param set-default COM_POS_FS_PROB 1
 param set-default COM_VEL_FS_EVH 5
 # Disable preflight disarm to not interfere with external launching
 param set-default COM_DISARM_PRFLT -1

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -83,18 +83,24 @@ then
 	teraranger start -X
 fi
 
-# Possible external pmw3901 optical flow sensor
-if param greater -s SENS_EN_PMW3901 0
+# paa3905 optical flow sensor (external SPI)
+if param greater -s SENS_EN_PAA3905 0
 then
-	pmw3901 -S start
+	paa3905 -S start
 fi
 
-# Possible external paw3902 optical flow sensor
+# paw3902 optical flow sensor (external SPI)
 if param greater -s SENS_EN_PAW3902 0
 then
 	paw3902 -S start
 fi
 
+# pmw3901 optical flow sensor (external SPI)
+if param greater -s SENS_EN_PMW3901 0
+then
+	pmw3901 -S start
+fi
+
 # vl53l1x i2c distance sensor
 if param compare -s SENS_EN_VL53L1X 1
 then
@@ -123,13 +129,31 @@ fi
 # Sensirion SDP3X differential pressure sensor external I2C
 if param compare -s SENS_EN_SDP3X 1
 then
-	if ! sdp3x_airspeed start -X
+	if ! sdp3x start -X
 	then
 		# try another common address
-		sdp3x_airspeed start -X -a 0x22
+		sdp3x start -X -a 0x22
 	fi
 fi
 
+# TE MS4515 differential pressure sensor external I2C
+if param compare -s SENS_EN_MS4515 1
+then
+	ms4515 start -X
+fi
+
+# TE MS4525DO differential pressure sensor external I2C
+if param compare -s SENS_EN_MS4525DO 1
+then
+	ms4525do start -X
+fi
+
+# TE MS5525DSO differential pressure sensor external I2C
+if param compare -s SENS_EN_MS5525DS 1
+then
+	ms5525dso start -X
+fi
+
 # SHT3x temperature and hygrometer sensor, external I2C
 if param compare -s SENS_EN_SHT3X 1
 then
@@ -137,18 +161,6 @@ then
 	sht3x start -X -a 0x45
 fi
 
-# TE MS4525 differential pressure sensor external I2C
-if param compare -s SENS_EN_MS4525 1
-then
-	ms4525_airspeed start -X
-fi
-
-# TE MS5525 differential pressure sensor external I2C
-if param compare -s SENS_EN_MS5525 1
-then
-	ms5525_airspeed start -X
-fi
-
 # IR-LOCK sensor external I2C
 if param compare -s SENS_EN_IRLOCK 1
 then
@@ -186,9 +198,3 @@ then
 	# start last (wait for possible icm20948 passthrough mode)
 	ak09916 -X -q start
 fi
-
-###############################################################################
-#                            End Optional drivers                             #
-###############################################################################
-
-sensors start

ROMFS/px4fmu_common/init.d/rc.vtol_defaults

@@ -7,7 +7,7 @@
 
 set VEHICLE_TYPE vtol
 
-# MAV_TYPE_VTOL_RESERVED2 22
+# MAV_TYPE_VTOL_FIXEDROTOR 22
 param set-default MAV_TYPE 22
 
 param set-default MIS_TAKEOFF_ALT 20

ROMFS/px4fmu_common/init.d/rcS

@@ -21,7 +21,6 @@ set +e
 # it wastes flash
 #
 set R /
-set AUTOCNF no
 set FCONFIG /fs/microsd/etc/config.txt
 set FEXTRAS /fs/microsd/etc/extras.txt
 set FRC /fs/microsd/etc/rc.txt
@@ -177,13 +176,12 @@ else
 	fi
 
 	#
-	# Set AUTOCNF flag to use it in AUTOSTART scripts.
+	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
-		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
-		set AUTOCNF yes
+		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	fi
 
 	#
@@ -274,14 +272,6 @@ else
 		. $FCONFIG
 	fi
 
-	#
-	# If autoconfig parameter was set, reset it and save parameters.
-	#
-	if [ $AUTOCNF = yes ]
-	then
-		param set SYS_AUTOCONFIG 0
-	fi
-
 	#
 	# Check if UAVCAN is enabled, default to it for ESCs.
 	#
@@ -298,9 +288,9 @@ else
 			tune_control play error
 		fi
 	else
-		if param greater -s UAVCAN_V1_ENABLE 0
+		if param greater -s CYPHAL_ENABLE 0
 		then
-			uavcan_v1 start
+			cyphal start
 		fi
 	fi
 
@@ -405,9 +395,17 @@ else
 			battery_status start
 		fi
 
+		sensors start
 		commander start
 	fi
 
+	#
+	# Configure vehicle type specific parameters.
+	# Note: rc.vehicle_setup is the entry point for rc.interface,
+	#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
+	#
+	. ${R}etc/init.d/rc.vehicle_setup
+
 	# Pre-takeoff continuous magnetometer calibration
 	if param compare -s MBE_ENABLE 1
 	then
@@ -458,13 +456,6 @@ else
 		fi
 	fi
 
-	#
-	# Configure vehicle type specific parameters.
-	# Note: rc.vehicle_setup is the entry point for rc.interface,
-	#       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
-	#
-	. ${R}etc/init.d/rc.vehicle_setup
-
 	#
 	# Play the startup tune (if not disabled or there is an error)
 	#
@@ -492,12 +483,6 @@ else
 		gimbal start
 	fi
 
-	# Check for flow sensor
-	if param compare -s SENS_EN_PX4FLOW 1
-	then
-		px4flow start -X
-	fi
-
 	# Blacksheep telemetry
 	if param compare -s TEL_BST_EN 1
 	then
@@ -514,6 +499,12 @@ else
 		gyro_calibration start
 	fi
 
+	# Check for px4flow sensor
+	if param compare -s SENS_EN_PX4FLOW 1
+	then
+		px4flow start -X &
+	fi
+
 	#
 	# Optional board supplied extras: rc.board_extras
 	#
@@ -564,7 +555,6 @@ fi
 # Unset all script parameters to free RAM.
 #
 unset R
-unset AUTOCNF
 unset FCONFIG
 unset FEXTRAS
 unset FRC

ROMFS/px4fmu_common/mixers-sitl/plane_sitl.main.mix

@@ -21,14 +21,16 @@ O:      10000  10000      0 -10000  10000
 S: 0 3      0  20000 -10000 -10000  10000
 
 # mixer for the left aileron
-M: 1
+M: 2
 O:      10000  10000   0 -10000  10000
 S: 0 0  -10000  -10000    0 -10000  10000
+S: 0 5   10000   10000    0 -10000  10000
 
 # mixer for the right aileron
-M: 1
+M: 2
 O:      10000  10000   0 -10000  10000
 S: 0 0  10000  10000    0 -10000  10000
+S: 0 5  10000  10000    0 -10000  10000
 
 # mixer for the elevator
 M: 1

ROMFS/px4fmu_common/mixers-sitl/tiltrotor_sitl.main.mix

@@ -8,22 +8,22 @@ R: 4x
 # tilt servo motor 1
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # tilt servo motor 2
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # tilt servo motor 3
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # tilt servo motor 4
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # mixer for the left aileron
 M: 1

ROMFS/px4fmu_common/mixers/AAERTWF.main.mix

@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -20,11 +20,11 @@ endpoints to suit.
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 Elevator mixer
 ------------

ROMFS/px4fmu_common/mixers/AAVVTWFF.main.mix

@@ -11,7 +11,7 @@ to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,11 +21,11 @@ endpoints to suit.
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_common/mixers/AAVVTWFF_vtail.main.mix

@@ -9,20 +9,20 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw), 3 (thrust) 4 (flaps), 5 (spoiler).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up mechanically reversed.
 
 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_common/mixers/CMakeLists.txt

@@ -40,8 +40,6 @@ px4_add_romfs_files(
 	babyshark.main.mix
 	blade130.main.mix
 	CCPM.main.mix
-	claire.aux.mix
-	claire.main.mix
 	cloudship.main.mix
 	coax.main.mix
 	delta.main.mix
@@ -83,7 +81,6 @@ px4_add_romfs_files(
 	tri_y_yaw-.main.mix
 	uuv_x.main.mix
 	vectored6dof.main.mix
-	Viper.main.mix
 	vtol_AAERT.aux.mix
 	vtol_AAVVT.aux.mix
 	vtol_TTTTAAER.aux.mix

ROMFS/px4fmu_common/mixers/Viper.main.mix

@@ -1,66 +0,0 @@
-Viper Delta-wing mixer
-=================================
-# @board px4_fmu-v2 exclude
-
-Designed for Viper.
-
-TODO (sjwilks): Add mixers for flaps.
-
-This file defines mixers suitable for controlling a delta wing aircraft using
-PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
-servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
-assumed to be unused.
-
-Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch) and 3 (thrust).
-
-See the README for more information on the scaler format.
-
-Elevon mixers
--------------
-Three scalers total (output, roll, pitch).
-
-On the assumption that the two elevon servos are physically reversed, the pitch
-input is inverted between the two servos.
-
-The scaling factor for roll inputs is adjusted to implement differential travel
-for the elevons.
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1   8000   8000      0 -10000  10000
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1  -8000  -8000      0 -10000  10000
-
-Output 2
---------
-This mixer is empty.
-
-Z:
-
-Motor speed mixer
------------------
-Two scalers total (output, thrust).
-
-This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
-range.  Inputs below zero are treated as zero.
-
-M: 1
-S: 0 3      0  20000 -10000 -10000  10000
-
-Inputs to the mixer come from channel group 2 (payload), channels 0
-(bay servo 1), 1 (bay servo 2) and 3 (drop release).
------------------------------------------------------
-
-M: 1
-S: 2 0  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 1  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 2  -8000  -8000      0 -10000  10000
-
-

ROMFS/px4fmu_common/mixers/claire.aux.mix

@@ -1,28 +0,0 @@
-# mixer for the CruiseAder Claire tilt mechansim servo and elevons
-
-=======================================================================
-
-
-Tilt mechanism servo mixer
-
----------------------------
-
-M: 1
-
-
-S: 1 4  10000  10000      0 -10000  10000
-
-
-
-Elevon mixers
-
--------------
-
-M: 2
-
-S: 1 0   7500   7500      0 -10000  10000
-S: 1 1   7500   7500      0 -10000  10000
-
-M: 2
-S: 1 0    7500    7500    0 -10000  10000
-S: 1 1   -7500   -7500    0 -10000  10000

ROMFS/px4fmu_common/mixers/claire.main.mix

@@ -1,8 +0,0 @@
-# CruiseAder Claire Main Multirotor mixer for PX4FMU
-# @board px4_fmu-v2 exclude
-
-#
-
-#===========================
-
-R: 4x

ROMFS/px4fmu_common/mixers/firefly6.aux.mix

@@ -6,7 +6,7 @@
 Tilt mechanism servo mixer
 ---------------------------
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 Elevon mixers
 -------------

ROMFS/px4fmu_common/mixers/vtol_AAVVT.aux.mix

@@ -5,14 +5,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU
 
 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU 
+The configuration assumes the aileron servos are connected to PX4FMU
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,11 +22,11 @@ endpoints to suit.
 
 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 6  10000  10000      0 -10000  10000
+S: 1 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 6 -10000 -10000      0 -10000  10000
+S: 1 5 -10000 -10000      0 -10000  10000
 
 
 V-tail mixers

ROMFS/px4fmu_common/mixers/vtol_TTTTAAER.aux.mix

@@ -6,19 +6,19 @@
 ---------------------------
 # front left up:2000 down:1000
 M: 1
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 
 # front right up:1000 down:2000
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # rear left up:2000 down:1000
 M: 1
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 
 # rear right up:1000 down:2000
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 
 # Aileron mixer

ROMFS/px4fmu_common/mixers/vtol_convergence.main.mix

@@ -10,12 +10,12 @@ Tilt mechanism servo mixer
 ---------------------------
 #RIGHT up:2000 down:1000
 M: 2
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 Elevon mixers

ROMFS/px4fmu_test/init.d/rc.sensors

@@ -16,15 +16,15 @@ if board_adc start
 then
 fi
 
-if sdp3x_airspeed start -X
+if sdp3x start -X
 then
 fi
 
-if ms5525_airspeed start -X
+if ms5525dso start -X
 then
 fi
 
-if ms4525_airspeed start -X
+if ms4525do start -X
 then
 fi
 

ROMFS/px4fmu_test/mixers/AAERTWF.main.mix

@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 Elevator mixer
 ------------

ROMFS/px4fmu_test/mixers/AAVVTWFF.main.mix

@@ -9,9 +9,9 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,12 +22,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_test/mixers/vtol2_test.mix

@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0 -20000   9000 -10000  10000
+S: 1 8      0 -20000   9000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000  -10000 -10000  10000
+S: 1 8      0  20000  -10000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000
 
 Elevon mixers

ROMFS/px4fmu_test/mixers/vtol_AAVVT.aux.mix

@@ -3,14 +3,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU
 
 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU 
+The configuration assumes the aileron servos are connected to PX4FMU
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 6  10000  10000      0 -10000  10000
+S: 1 5  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 6 -10000 -10000      0 -10000  10000
+S: 1 5 -10000 -10000      0 -10000  10000
 
 
 V-tail mixers

ROMFS/px4fmu_test/mixers/vtol_convergence.main.mix

@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 Elevon mixers

Tools/HIL/run_nsh_cmd.py

@@ -95,7 +95,7 @@ def do_nsh_cmd(port_url, baudrate, cmd):
 
 
     timeout_start = time.monotonic()
-    timeout = 240 # 4 minutes
+    timeout = 600 # 10 minutes
 
     return_code = 0
 

Tools/astyle/files_to_check_code_style.sh

@@ -8,23 +8,24 @@ if [ $# -gt 0 ]; then
 fi
 
 exec find boards msg src platforms test \
-    -path msg/templates/urtps -prune -o \
-    -path platforms/nuttx/NuttX -prune -o \
-    -path platforms/qurt/dspal -prune -o \
-    -path src/drivers/uavcan/libuavcan -prune -o \
-    -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
-    -path src/drivers/uavcan_v1/libcanard -prune -o \
-    -path src/drivers/uavcannode_gps_demo/libcanard -prune -o \
-    -path src/lib/crypto/monocypher -prune -o \
-    -path src/lib/events/libevents -prune -o \
-    -path src/lib/parameters/uthash -prune -o \
-    -path src/modules/ekf2/EKF -prune -o \
-    -path src/modules/gyro_fft/CMSIS_5 -prune -o \
-    -path src/modules/mavlink/mavlink -prune -o \
-    -path src/modules/micrortps_bridge/micro-CDR -prune -o \
-    -path src/modules/micrortps_bridge/microRTPS_client -prune -o \
-    -path test/mavsdk_tests/catch2 -prune -o \
-    -path src/lib/crypto/monocypher -prune -o \
-    -path src/lib/crypto/libtomcrypt -prune -o \
-    -path src/lib/crypto/libtommath -prune -o \
+    -not -path "msg/templates/urtps/*" \
+    -not -path "platforms/nuttx/NuttX/*" \
+    -not -path "platforms/qurt/dspal/*" \
+    -not -path "src/drivers/gps/devices/*" \
+    -not -path "src/drivers/uavcan/libuavcan/*" \
+    -not -path "src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis/*" \
+    -not -path "src/drivers/cyphal/libcanard/*" \
+    -not -path "src/lib/crypto/monocypher/*" \
+    -not -path "src/lib/events/libevents/*" \
+    -not -path "src/lib/parameters/uthash/*" \
+    -not -path "src/modules/ekf2/EKF/*" \
+    -not -path "src/modules/gyro_fft/CMSIS_5/*" \
+    -not -path "src/modules/mavlink/mavlink/*" \
+    -not -path "src/modules/micrortps_bridge/micro-CDR/*" \
+    -not -path "src/modules/micrortps_bridge/microRTPS_client/*" \
+    -not -path "test/mavsdk_tests/catch2/*" \
+    -not -path "src/lib/crypto/monocypher/*" \
+    -not -path "src/lib/crypto/libtomcrypt/*" \
+    -not -path "src/lib/crypto/libtommath/*" \
+    -not -path "src/modules/microdds_client/Micro-XRCE-DDS-Client/*" \
     -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) | grep $PATTERN

Tools/ecl_ekf/analyse_logdata_ekf.py

@@ -11,7 +11,7 @@ from pyulog import ULog
 from analysis.detectors import InAirDetector, PreconditionError
 from analysis.metrics import calculate_ecl_ekf_metrics
 from analysis.checks import perform_ecl_ekf_checks
-from analysis.post_processing import get_estimator_check_flags
+from analysis.post_processing import get_gps_check_fail_flags
 
 def analyse_ekf(
         ulog: ULog, check_levels: Dict[str, float], multi_instance: int = 0,
@@ -40,6 +40,11 @@ def analyse_ekf(
     except:
         raise PreconditionError('could not find estimator_status instance', multi_instance)
 
+    try:
+        estimator_status_flags = ulog.get_dataset('estimator_status_flags', multi_instance).data
+    except:
+        raise PreconditionError('could not find estimator_status_flags instance', multi_instance)
+
     try:
         _ = ulog.get_dataset('estimator_innovations', multi_instance).data
     except:
@@ -61,14 +66,14 @@ def analyse_ekf(
         'in_air_transition_time': round(in_air.take_off + in_air.log_start, 2),
         'on_ground_transition_time': round(in_air.landing + in_air.log_start, 2)}
 
-    control_mode, innov_flags, gps_fail_flags = get_estimator_check_flags(estimator_status)
+    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
 
     sensor_checks, innov_fail_checks = find_checks_that_apply(
-        control_mode, estimator_status,
+        estimator_status_flags, estimator_status,
         pos_checks_when_sensors_not_fused=pos_checks_when_sensors_not_fused)
 
     metrics = calculate_ecl_ekf_metrics(
-        ulog, innov_flags, innov_fail_checks, sensor_checks, in_air, in_air_no_ground_effects,
+        ulog, estimator_status_flags, innov_fail_checks, sensor_checks, in_air, in_air_no_ground_effects,
         multi_instance, red_thresh=red_thresh, amb_thresh=amb_thresh)
 
     check_status, master_status = perform_ecl_ekf_checks(
@@ -78,12 +83,12 @@ def analyse_ekf(
 
 
 def find_checks_that_apply(
-    control_mode: dict, estimator_status: dict, pos_checks_when_sensors_not_fused: bool = False) ->\
+    estimator_status_flags: dict, estimator_status: dict, pos_checks_when_sensors_not_fused: bool = False) ->\
         Tuple[List[str], List[str]]:
     """
     finds the checks that apply and stores them in lists for the std checks and the innovation
     fail checks.
-    :param control_mode:
+    :param estimator_status_flags:
     :param estimator_status:
     :param b_pos_only_when_sensors_fused:
     :return: a tuple of two lists that contain strings for the std checks and for the innovation
@@ -97,7 +102,7 @@ def find_checks_that_apply(
     innov_fail_checks.append('posv')
 
     # Magnetometer Sensor Checks
-    if (np.amax(control_mode['yaw_aligned']) > 0.5):
+    if (np.amax(estimator_status_flags['cs_yaw_align']) > 0.5):
         sensor_checks.append('mag')
 
         innov_fail_checks.append('magx')
@@ -106,13 +111,14 @@ def find_checks_that_apply(
         innov_fail_checks.append('yaw')
 
     # Velocity Sensor Checks
-    if (np.amax(control_mode['using_gps']) > 0.5):
+    if (np.amax(estimator_status_flags['cs_gps']) > 0.5):
         sensor_checks.append('vel')
-        innov_fail_checks.append('vel')
+        innov_fail_checks.append('velh')
+        innov_fail_checks.append('velv')
 
     # Position Sensor Checks
-    if (pos_checks_when_sensors_not_fused or (np.amax(control_mode['using_gps']) > 0.5)
-        or (np.amax(control_mode['using_evpos']) > 0.5)):
+    if (pos_checks_when_sensors_not_fused or (np.amax(estimator_status_flags['cs_gps']) > 0.5)
+        or (np.amax(estimator_status_flags['cs_ev_pos']) > 0.5)):
         sensor_checks.append('pos')
         innov_fail_checks.append('posh')
 
@@ -128,7 +134,7 @@ def find_checks_that_apply(
         innov_fail_checks.append('hagl')
 
     # optical flow sensor checks
-    if (np.amax(control_mode['using_optflow']) > 0.5):
+    if (np.amax(estimator_status_flags['cs_opt_flow']) > 0.5):
         innov_fail_checks.append('ofx')
         innov_fail_checks.append('ofy')
 

Tools/ecl_ekf/analysis/checks.py

@@ -55,7 +55,7 @@ def perform_imu_checks(
 
     # perform the vibration check
     imu_status['imu_vibration_check'] = 'Pass'
-    for imu_vibr_metric in ['imu_coning', 'imu_hfdang', 'imu_hfdvel']:
+    for imu_vibr_metric in ['imu_coning', 'imu_hfgyro', 'imu_hfaccel']:
         mean_metric = '{:s}_mean'.format(imu_vibr_metric)
         peak_metric = '{:s}_peak'.format(imu_vibr_metric)
         if imu_metrics[mean_metric] > check_levels['{:s}_warn'.format(mean_metric)] \
@@ -123,7 +123,8 @@ def perform_sensor_innov_checks(
                                               ('magy', 'magy_fail_percentage', 'mag'),
                                               ('magz', 'magz_fail_percentage', 'mag'),
                                               ('yaw', 'yaw_fail_percentage', 'yaw'),
-                                              ('vel', 'vel_fail_percentage', 'vel'),
+                                              ('velh', 'vel_fail_percentage', 'vel'),
+                                              ('velv', 'vel_fail_percentage', 'vel'),
                                               ('posh', 'pos_fail_percentage', 'pos'),
                                               ('tas', 'tas_fail_percentage', 'tas'),
                                               ('hagl', 'hagl_fail_percentage', 'hagl'),

Tools/ecl_ekf/analysis/metrics.py

@@ -11,7 +11,7 @@ import numpy as np
 from analysis.detectors import InAirDetector
 
 def calculate_ecl_ekf_metrics(
-        ulog: ULog, innov_flags: Dict[str, float], innov_fail_checks: List[str],
+        ulog: ULog, estimator_status_flags: Dict[str, float], innov_fail_checks: List[str],
         sensor_checks: List[str], in_air: InAirDetector, in_air_no_ground_effects: InAirDetector,
         multi_instance: int = 0, red_thresh: float = 1.0, amb_thresh: float = 0.5) -> Tuple[dict, dict, dict, dict]:
 
@@ -20,7 +20,7 @@ def calculate_ecl_ekf_metrics(
         red_thresh=red_thresh, amb_thresh=amb_thresh)
 
     innov_fail_metrics = calculate_innov_fail_metrics(
-        innov_flags, innov_fail_checks, in_air, in_air_no_ground_effects)
+        estimator_status_flags, innov_fail_checks, in_air, in_air_no_ground_effects)
 
     imu_metrics = calculate_imu_metrics(ulog, multi_instance, in_air_no_ground_effects)
 
@@ -90,10 +90,10 @@ def calculate_sensor_metrics(
 
 
 def calculate_innov_fail_metrics(
-        innov_flags: dict, innov_fail_checks: List[str], in_air: InAirDetector,
+        estimator_status_flags: dict, innov_fail_checks: List[str], in_air: InAirDetector,
         in_air_no_ground_effects: InAirDetector) -> dict:
     """
-    :param innov_flags:
+    :param estimator_status_flags:
     :param innov_fail_checks:
     :param in_air:
     :param in_air_no_ground_effects:
@@ -103,17 +103,18 @@ def calculate_innov_fail_metrics(
     innov_fail_metrics = dict()
 
     # calculate innovation check fail metrics
-    for signal_id, signal, result in [('posv', 'posv_innov_fail', 'hgt_fail_percentage'),
-                                      ('magx', 'magx_innov_fail', 'magx_fail_percentage'),
-                                      ('magy', 'magy_innov_fail', 'magy_fail_percentage'),
-                                      ('magz', 'magz_innov_fail', 'magz_fail_percentage'),
-                                      ('yaw', 'yaw_innov_fail', 'yaw_fail_percentage'),
-                                      ('vel', 'vel_innov_fail', 'vel_fail_percentage'),
-                                      ('posh', 'posh_innov_fail', 'pos_fail_percentage'),
-                                      ('tas', 'tas_innov_fail', 'tas_fail_percentage'),
-                                      ('hagl', 'hagl_innov_fail', 'hagl_fail_percentage'),
-                                      ('ofx', 'ofx_innov_fail', 'ofx_fail_percentage'),
-                                      ('ofy', 'ofy_innov_fail', 'ofy_fail_percentage')]:
+    for signal_id, signal, result in [('posv', 'reject_ver_pos', 'hgt_fail_percentage'),
+                                      ('magx', 'reject_mag_x', 'magx_fail_percentage'),
+                                      ('magy', 'reject_mag_y', 'magy_fail_percentage'),
+                                      ('magz', 'reject_mag_z', 'magz_fail_percentage'),
+                                      ('yaw', 'reject_yaw', 'yaw_fail_percentage'),
+                                      ('velh', 'reject_hor_vel', 'vel_fail_percentage'),
+                                      ('velv', 'reject_ver_vel', 'vel_fail_percentage'),
+                                      ('posh', 'reject_hor_pos', 'pos_fail_percentage'),
+                                      ('tas', 'reject_airspeed', 'tas_fail_percentage'),
+                                      ('hagl', 'reject_hagl', 'hagl_fail_percentage'),
+                                      ('ofx', 'reject_optflow_x', 'ofx_fail_percentage'),
+                                      ('ofy', 'reject_optflow_y', 'ofy_fail_percentage')]:
 
         # only run innov fail checks, if they apply.
         if signal_id in innov_fail_checks:
@@ -125,7 +126,7 @@ def calculate_innov_fail_metrics(
                 in_air_detector = in_air
 
             innov_fail_metrics[result] = calculate_stat_from_signal(
-                innov_flags, 'estimator_status', signal, in_air_detector,
+                estimator_status_flags, 'estimator_status_flags', signal, in_air_detector,
                 lambda x: 100.0 * np.mean(x > 0.5))
 
     return innov_fail_metrics
@@ -144,17 +145,27 @@ def calculate_imu_metrics(ulog: ULog, multi_instance, in_air_no_ground_effects:
         imu_metrics[result] = calculate_stat_from_signal(
             estimator_status_data, 'estimator_status', signal, in_air_no_ground_effects, np.median)
 
+
     # calculates peak and mean for IMU vibration checks
-    for signal, result in [('vibe[0]', 'imu_coning'),
-                           ('vibe[1]', 'imu_hfdang'),
-                           ('vibe[2]', 'imu_hfdvel')]:
-        peak = calculate_stat_from_signal(
-            estimator_status_data, 'estimator_status', signal, in_air_no_ground_effects, np.amax)
-        if peak > 0.0:
-            imu_metrics['{:s}_peak'.format(result)] = peak
-            imu_metrics['{:s}_mean'.format(result)] = calculate_stat_from_signal(
-                estimator_status_data, 'estimator_status', signal,
-                in_air_no_ground_effects, np.mean)
+    for imu_status_instance in range(4):
+        try:
+            vehicle_imu_status_data = ulog.get_dataset('vehicle_imu_status', imu_status_instance).data
+
+            if vehicle_imu_status_data['accel_device_id'][0] == estimator_status_data['accel_device_id'][0]:
+
+                for signal, result in [('gyro_coning_vibration', 'imu_coning'),
+                                       ('gyro_vibration_metric', 'imu_hfgyro'),
+                                       ('accel_vibration_metric', 'imu_hfaccel')]:
+
+                    peak = calculate_stat_from_signal(vehicle_imu_status_data, 'vehicle_imu_status', signal, in_air_no_ground_effects, np.amax)
+
+                    if peak > 0.0:
+                        imu_metrics['{:s}_peak'.format(result)] = peak
+                        imu_metrics['{:s}_mean'.format(result)] = calculate_stat_from_signal(vehicle_imu_status_data, 'vehicle_imu_status', signal, in_air_no_ground_effects, np.mean)
+
+        except:
+            pass
+
 
     # IMU bias checks
     estimator_states_data = ulog.get_dataset('estimator_states', multi_instance).data

Tools/ecl_ekf/analysis/post_processing.py

@@ -7,115 +7,6 @@ from typing import Tuple
 
 import numpy as np
 
-
-def get_estimator_check_flags(estimator_status: dict) -> Tuple[dict, dict, dict]:
-    """
-    :param estimator_status:
-    :return:
-    """
-    control_mode = get_control_mode_flags(estimator_status)
-    innov_flags = get_innovation_check_flags(estimator_status)
-    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
-    return control_mode, innov_flags, gps_fail_flags
-
-
-def get_control_mode_flags(estimator_status: dict) -> dict:
-    """
-    :param estimator_status:
-    :return:
-    """
-
-    control_mode = dict()
-    # extract control mode metadata from estimator_status.control_mode_flags
-    # 0 - true if the filter tilt alignment is complete
-    # 1 - true if the filter yaw alignment is complete
-    # 2 - true if GPS measurements are being fused
-    # 3 - true if optical flow measurements are being fused
-    # 4 - true if a simple magnetic yaw heading is being fused
-    # 5 - true if 3-axis magnetometer measurement are being fused
-    # 6 - true if synthetic magnetic declination measurements are being fused
-    # 7 - true when the vehicle is airborne
-    # 8 - true when wind velocity is being estimated
-    # 9 - true when baro height is being fused as a primary height reference
-    # 10 - true when range finder height is being fused as a primary height reference
-    # 11 - true when range finder height is being fused as a primary height reference
-    # 12 - true when local position data from external vision is being fused
-    # 13 - true when yaw data from external vision measurements is being fused
-    # 14 - true when height data from external vision measurements is being fused
-    # 15 - true when synthetic sideslip measurements are being fused
-    # 16 - true true when the mag field does not match the expected strength
-    # 17 - true true when the vehicle is operating as a fixed wing vehicle
-    # 18 - true when the magnetometer has been declared faulty and is no longer being used
-    # 19 - true true when airspeed measurements are being fused
-    # 20 - true true when protection from ground effect induced static pressure rise is active
-    # 21 - true when rng data wasn't ready for more than 10s and new rng values haven't changed enough
-    # 22 - true when yaw (not ground course) data from a GPS receiver is being fused
-    # 23 - true when the in-flight mag field alignment has been completed
-    # 24 - true when local earth frame velocity data from external vision measurements are being fused
-    # 25 - true when we are using a synthesized measurement for the magnetometer Z component
-    control_mode['tilt_aligned'] = ((2 ** 0 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['yaw_aligned'] = ((2 ** 1 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_gps'] = ((2 ** 2 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_optflow'] = ((2 ** 3 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_magyaw'] = ((2 ** 4 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_mag3d'] = ((2 ** 5 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_magdecl'] = ((2 ** 6 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['airborne'] = ((2 ** 7 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['estimating_wind'] = ((2 ** 8 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_barohgt'] = ((2 ** 9 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_rnghgt'] = ((2 ** 10 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_gpshgt'] = ((2 ** 11 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_evpos'] = ((2 ** 12 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_evyaw'] = ((2 ** 13 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['using_evhgt'] = ((2 ** 14 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['fuse_beta'] = ((2 ** 15 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['mag_field_disturbed'] = ((2 ** 16 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['fixed_wing'] = ((2 ** 17 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['mag_fault'] = ((2 ** 18 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['fuse_aspd'] = ((2 ** 19 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['gnd_effect'] = ((2 ** 20 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['rng_stuck'] = ((2 ** 21 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['gps_yaw'] = ((2 ** 22 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['mag_aligned_in_flight'] = ((2 ** 23 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['ev_vel'] = ((2 ** 24 & estimator_status['control_mode_flags']) > 0) * 1
-    control_mode['synthetic_mag_z'] = ((2 ** 25 & estimator_status['control_mode_flags']) > 0) * 1
-    return control_mode
-
-def get_innovation_check_flags(estimator_status: dict) -> dict:
-    """
-    :param estimator_status:
-    :return:
-    """
-
-    innov_flags = dict()
-    # innovation_check_flags summary
-    # 0 - true if velocity observations have been rejected
-    # 1 - true if horizontal position observations have been rejected
-    # 2 - true if true if vertical position observations have been rejected
-    # 3 - true if the X magnetometer observation has been rejected
-    # 4 - true if the Y magnetometer observation has been rejected
-    # 5 - true if the Z magnetometer observation has been rejected
-    # 6 - true if the yaw observation has been rejected
-    # 7 - true if the airspeed observation has been rejected
-    # 8 - true if synthetic sideslip observation has been rejected
-    # 9 - true if the height above ground observation has been rejected
-    # 10 - true if the X optical flow observation has been rejected
-    # 11 - true if the Y optical flow observation has been rejected
-    innov_flags['vel_innov_fail'] = ((2 ** 0 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['posh_innov_fail'] = ((2 ** 1 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['posv_innov_fail'] = ((2 ** 2 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['magx_innov_fail'] = ((2 ** 3 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['magy_innov_fail'] = ((2 ** 4 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['magz_innov_fail'] = ((2 ** 5 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['yaw_innov_fail'] = ((2 ** 6 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['tas_innov_fail'] = ((2 ** 7 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['sli_innov_fail'] = ((2 ** 8 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['hagl_innov_fail'] = ((2 ** 9 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['ofx_innov_fail'] = ((2 ** 10 & estimator_status['innovation_check_flags']) > 0) * 1
-    innov_flags['ofy_innov_fail'] = ((2 ** 11 & estimator_status['innovation_check_flags']) > 0) * 1
-    return innov_flags
-
-
 def get_gps_check_fail_flags(estimator_status: dict) -> dict:
     """
     :param estimator_status:

Tools/ecl_ekf/batch_process_metadata_ekf.py

@@ -48,7 +48,7 @@ for filename in os.listdir(metadata_directory):
 
 #        # print out the check levels
 #        print('\n'+'The following metadata loaded from '+filename+' were used'+'\n')
-#        val = population_data.get(filename, {}).get('imu_hfdang_mean')
+#        val = population_data.get(filename, {}).get('imu_hfgyro_mean')
 #        print(val)
 
 # Open pdf file for plotting
@@ -90,10 +90,10 @@ population_results = {
 'ofy_fail_pct_avg':[float('NaN'),'The mean percentage of innovation test fails for the Y axis optical flow sensor'],
 'imu_coning_max_avg':[float('NaN'),'The mean of the maximum in-flight values of the IMU delta angle coning vibration level (mrad)'],
 'imu_coning_mean_avg':[float('NaN'),'The mean of the mean in-flight value of the IMU delta angle coning vibration level (mrad)'],
-'imu_hfdang_max_avg':[float('NaN'),'The mean of the maximum in-flight values of the IMU high frequency delta angle vibration level (mrad)'],
-'imu_hfdang_mean_avg':[float('NaN'),'The mean of the mean in-flight value of the IMU delta high frequency delta angle vibration level (mrad)'],
-'imu_hfdvel_max_avg':[float('NaN'),'The mean of the maximum in-flight values of the IMU high frequency delta velocity vibration level (m/s)'],
-'imu_hfdvel_mean_avg':[float('NaN'),'The mean of the mean in-flight value of the IMU delta high frequency delta velocity vibration level (m/s)'],
+'imu_hfgyro_max_avg':[float('NaN'),'The mean of the maximum in-flight values of the IMU high frequency gyro vibration level (rad/s)'],
+'imu_hfgyro_mean_avg':[float('NaN'),'The mean of the mean in-flight value of the IMU delta high frequency gyro vibration level (rad/s)'],
+'imu_hfaccel_max_avg':[float('NaN'),'The mean of the maximum in-flight values of the IMU high frequency accel vibration level (m/s/s)'],
+'imu_hfaccel_mean_avg':[float('NaN'),'The mean of the mean in-flight value of the IMU delta high frequency accel vibration level (m/s/s)'],
 'obs_ang_median_avg':[float('NaN'),'The mean of the median in-flight value of the output observer angular tracking error magnitude (mrad)'],
 'obs_vel_median_avg':[float('NaN'),'The mean of the median in-flight value of the output observer velocity tracking error magnitude (m/s)'],
 'obs_pos_median_avg':[float('NaN'),'The mean of the median in-flight value of the output observer position tracking error magnitude (m)'],
@@ -360,54 +360,54 @@ if (len(result1) > 0 and len(result2) > 0):
     plt.close(8)
 
 # IMU high frequency delta angle vibration levels
-temp = np.asarray([population_data[k].get('imu_hfdang_peak') for k in found_keys])
+temp = np.asarray([population_data[k].get('imu_hfgyro_peak') for k in found_keys])
 result1 = 1000.0 * temp[np.isfinite(temp)]
-temp = np.asarray([population_data[k].get('imu_hfdang_mean') for k in found_keys])
+temp = np.asarray([population_data[k].get('imu_hfgyro_mean') for k in found_keys])
 result2 = 1000.0 * temp[np.isfinite(temp)]
 
 if (len(result1) > 0 and len(result2) > 0):
-    population_results['imu_hfdang_max_avg'][0] = np.mean(result1)
-    population_results['imu_hfdang_mean_avg'][0] = np.mean(result2)
+    population_results['imu_hfgyro_max_avg'][0] = np.mean(result1)
+    population_results['imu_hfgyro_mean_avg'][0] = np.mean(result2)
 
     plt.figure(9,figsize=(20,13))
 
     plt.subplot(2,1,1)
     plt.hist(result1)
-    plt.title("Gaussian Histogram - IMU HF Delta Angle Vibration Peak")
-    plt.xlabel("imu_hfdang_max (mrad)")
+    plt.title("Gaussian Histogram - IMU HF Gyroscope Vibration Peak")
+    plt.xlabel("imu_hfgyro_max (rad/s)")
     plt.ylabel("Frequency")
 
     plt.subplot(2,1,2)
     plt.hist(result2)
-    plt.title("Gaussian Histogram - IMU HF Delta Angle Vibration Mean")
-    plt.xlabel("imu_hfdang_mean (mrad)")
+    plt.title("Gaussian Histogram - IMU HF Gyroscope Vibration Mean")
+    plt.xlabel("imu_hfgyro_mean (rad/s)")
     plt.ylabel("Frequency")
 
     pp.savefig()
     plt.close(9)
 
-# IMU high frequency delta velocity vibration levels
-temp = np.asarray([population_data[k].get('imu_hfdvel_peak') for k in found_keys])
+# IMU high frequency accel vibration levels
+temp = np.asarray([population_data[k].get('imu_hfaccel_peak') for k in found_keys])
 result1 = temp[np.isfinite(temp)]
-temp = np.asarray([population_data[k].get('imu_hfdvel_mean') for k in found_keys])
+temp = np.asarray([population_data[k].get('imu_hfaccel_mean') for k in found_keys])
 result2 = temp[np.isfinite(temp)]
 
 if (len(result1) > 0 and len(result2) > 0):
-    population_results['imu_hfdvel_max_avg'][0] = np.mean(result1)
-    population_results['imu_hfdvel_mean_avg'][0] = np.mean(result2)
+    population_results['imu_hfaccel_max_avg'][0] = np.mean(result1)
+    population_results['imu_hfaccel_mean_avg'][0] = np.mean(result2)
 
     plt.figure(10,figsize=(20,13))
 
     plt.subplot(2,1,1)
     plt.hist(result1)
-    plt.title("Gaussian Histogram - IMU HF Delta Velocity Vibration Peak")
-    plt.xlabel("imu_hfdvel_max (m/s)")
+    plt.title("Gaussian Histogram - IMU HF Accelerometer Vibration Peak")
+    plt.xlabel("imu_hfaccel_max (m/s/s)")
     plt.ylabel("Frequency")
 
     plt.subplot(2,1,2)
     plt.hist(result2)
-    plt.title("Gaussian Histogram - IMU HF Delta Velocity Vibration Mean")
-    plt.xlabel("imu_hfdvel_mean (m/s)")
+    plt.title("Gaussian Histogram - IMU HF Accelerometer Vibration Mean")
+    plt.xlabel("imu_hfaccel_mean (m/s/s)")
     plt.ylabel("Frequency")
 
     pp.savefig()
@@ -535,12 +535,12 @@ single_log_results = {
 'hgt_sensor_status':['Pass','Height sensor check summary. This sensor data can be sourced from either Baro, GPS, range fidner or external vision system. A Fail result indicates a significant error that caused a significant reduction in vehicle navigation performance was detected. A Warning result indicates that error levels higher than normal were detected but these errors did not significantly impact navigation performance. A Pass result indicates that no amonalies were detected and no further investigation is required'],
 'hgt_test_max':[float('NaN'),'The maximum in-flight value of the height sensor innovation consistency test ratio.'],
 'hgt_test_mean':[float('NaN'),'The mean in-flight value of the height sensor innovation consistency test ratio.'],
-'imu_coning_mean':[float('NaN'),'Mean in-flight value of the IMU delta angle coning vibration metric (rad)'],
-'imu_coning_peak':[float('NaN'),'Peak in-flight value of the IMU delta angle coning vibration metric (rad)'],
-'imu_hfdang_mean':[float('NaN'),'Mean in-flight value of the IMU delta angle high frequency vibration metric (rad)'],
-'imu_hfdang_peak':[float('NaN'),'Peak in-flight value of the IMU delta angle high frequency vibration metric (rad)'],
-'imu_hfdvel_mean':[float('NaN'),'Mean in-flight value of the IMU delta velocity high frequency vibration metric (m/s)'],
-'imu_hfdvel_peak':[float('NaN'),'Peak in-flight value of the IMU delta velocity high frequency vibration metric (m/s)'],
+'imu_coning_mean':[float('NaN'),'Mean in-flight value of the IMU delta angle coning vibration metric (rad^2)'],
+'imu_coning_peak':[float('NaN'),'Peak in-flight value of the IMU delta angle coning vibration metric (rad^2)'],
+'imu_hfgyro_mean':[float('NaN'),'Mean in-flight value of the IMU gyro high frequency vibration metric (rad/s)'],
+'imu_hfgyro_peak':[float('NaN'),'Peak in-flight value of the IMU gyro high frequency vibration metric (rad/s)'],
+'imu_hfaccel_mean':[float('NaN'),'Mean in-flight value of the IMU accel high frequency vibration metric (m/s/s)'],
+'imu_hfaccel_peak':[float('NaN'),'Peak in-flight value of the IMU accel high frequency vibration metric (m/s/s)'],
 'imu_sensor_status':['Pass','IMU sensor check summary. A Fail result indicates a significant error that caused a significant reduction in vehicle navigation performance was detected. A Warning result indicates that error levels higher than normal were detected but these errors did not significantly impact navigation performance. A Pass result indicates that no amonalies were detected and no further investigation is required'],
 'in_air_transition_time':[float('NaN'),'The time in seconds measured from startup that the EKF transtioned into in-air mode. Set to a nan if a transition event is not detected.'],
 'mag_percentage_amber':[float('NaN'),'The percentage of in-flight consolidated magnetic field sensor innovation consistency test values > 0.5.'],

Tools/ecl_ekf/check_level_dict.csv

@@ -21,10 +21,10 @@ hagl_amber_warn_pct,5.0
 tas_amber_warn_pct,5.0
 imu_coning_peak_warn,1.8E-5
 imu_coning_mean_warn,3.6E-6
-imu_hfdang_peak_warn,3.0E-3
-imu_hfdang_mean_warn,6.0E-4
-imu_hfdvel_peak_warn,9.0E-2
-imu_hfdvel_mean_warn,1.8E-2
+imu_hfgyro_peak_warn,12
+imu_hfgyro_mean_warn,2.4
+imu_hfaccel_peak_warn,360
+imu_hfaccel_mean_warn,72
 obs_ang_err_median_warn,8.0E-3
 obs_vel_err_median_warn,0.05
 obs_pos_err_median_warn,0.15

Tools/ecl_ekf/check_table.csv

@@ -49,12 +49,12 @@ hagl_test_mean, The mean in-flight value of the height above ground sensor innov
 ofx_fail_percentage, The percentage of in-flight recorded failure events for the optical flow sensor X-axis innovation consistency test.
 ofy_fail_percentage, The percentage of in-flight recorded failure events for the optical flow sensor Y-axis innovation consistency test.
 filter_faults_max, Largest recorded value of the filter internal fault bitmask. Should always be zero.
-imu_coning_peak, Peak in-flight value of the IMU delta angle coning vibration metric (rad)
-imu_coning_mean, Mean in-flight value of the IMU delta angle coning vibration metric (rad)
-imu_hfdang_peak, Peak in-flight value of the IMU delta angle high frequency vibration metric (rad)
-imu_hfdang_mean, Mean in-flight value of the IMU delta angle high frequency vibration metric (rad)
-imu_hfdvel_peak, Peak in-flight value of the IMU delta velocity high frequency vibration metric (m/s)
-imu_hfdvel_mean, Mean in-flight value of the IMU delta velocity high frequency vibration metric (m/s)
+imu_coning_peak, Peak in-flight value of the IMU delta angle coning vibration metric (rad^2)
+imu_coning_mean, Mean in-flight value of the IMU delta angle coning vibration metric (rad^2)
+imu_hfgyro_peak, Peak in-flight value of the IMU accel high frequency vibration metric (rad/s)
+imu_hfgyro_mean, Mean in-flight value of the IMU accel high frequency vibration metric (rad/s)
+imu_hfaccel_peak, Peak in-flight value of the IMU accel high frequency vibration metric (m/s/s)
+imu_hfaccel_mean, Mean in-flight value of the IMU accel high frequency vibration metric (m/s/s)
 output_obs_ang_err_median, Median in-flight value of the output observer angular error (rad)
 output_obs_vel_err_median, Median in-flight value of the output observer velocity error (m/s)
 output_obs_pos_err_median, Median in-flight value of the output observer position error (m)

Tools/ecl_ekf/plotting/pdf_report.py

@@ -11,7 +11,7 @@ import numpy as np
 from matplotlib.backends.backend_pdf import PdfPages
 from pyulog import ULog
 
-from analysis.post_processing import magnetic_field_estimates_from_states, get_estimator_check_flags
+from analysis.post_processing import magnetic_field_estimates_from_states, get_gps_check_fail_flags
 from plotting.data_plots import TimeSeriesPlot, InnovationPlot, ControlModeSummaryPlot, \
     CheckFlagsPlot
 from analysis.detectors import PreconditionError
@@ -33,6 +33,11 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
     except:
         raise PreconditionError('could not find estimator_status instance', multi_instance)
 
+    try:
+        estimator_status_flags = ulog.get_dataset('estimator_status_flags', multi_instance).data
+    except:
+        raise PreconditionError('could not find estimator_status_flags instance', multi_instance)
+
     try:
         estimator_states = ulog.get_dataset('estimator_states', multi_instance).data
     except:
@@ -68,12 +73,13 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
     except:
         raise PreconditionError('could not find innovation data')
 
-    control_mode, innov_flags, gps_fail_flags = get_estimator_check_flags(estimator_status)
+    gps_fail_flags = get_gps_check_fail_flags(estimator_status)
 
     status_time = 1e-6 * estimator_status['timestamp']
+    status_flags_time = 1e-6 * estimator_status_flags['timestamp']
 
     b_finishes_in_air, b_starts_in_air, in_air_duration, in_air_transition_time, \
-    on_ground_transition_time = detect_airtime(control_mode, status_time)
+    on_ground_transition_time = detect_airtime(estimator_status_flags, status_flags_time)
 
     with PdfPages(output_plot_filename) as pdf_pages:
 
@@ -173,9 +179,9 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
 
         # plot control mode summary A
         data_plot = ControlModeSummaryPlot(
-            status_time, control_mode, [['tilt_aligned', 'yaw_aligned'],
-            ['using_gps', 'using_optflow', 'using_evpos'], ['using_barohgt', 'using_gpshgt',
-             'using_rnghgt', 'using_evhgt'], ['using_magyaw', 'using_mag3d', 'using_magdecl']],
+            status_flags_time, estimator_status_flags, [['cs_tilt_align', 'cs_yaw_align'],
+            ['cs_gps', 'cs_opt_flow', 'cs_ev_pos'], ['cs_baro_hgt', 'cs_gps_hgt',
+             'cs_rng_hgt', 'cs_ev_hgt'], ['cs_mag_hdg', 'cs_mag_3d', 'cs_mag_dec']],
             x_label='time (sec)', y_labels=['aligned', 'pos aiding', 'hgt aiding', 'mag aiding'],
             annotation_text=[['tilt alignment', 'yaw alignment'], ['GPS aiding', 'optical flow aiding',
              'external vision aiding'], ['Baro aiding', 'GPS aiding', 'rangefinder aiding',
@@ -188,7 +194,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
         # plot control mode summary B
         # construct additional annotations for the airborne plot
         airborne_annotations = list()
-        if np.amin(np.diff(control_mode['airborne'])) > -0.5:
+        if np.amin(np.diff(estimator_status_flags['cs_in_air'])) > -0.5:
             airborne_annotations.append(
                 (on_ground_transition_time, 'air to ground transition not detected'))
         else:
@@ -197,7 +203,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
         if in_air_duration > 0.0:
             airborne_annotations.append(((in_air_transition_time + on_ground_transition_time) / 2,
                                          'duration = {:.1f} sec'.format(in_air_duration)))
-        if np.amax(np.diff(control_mode['airborne'])) < 0.5:
+        if np.amax(np.diff(estimator_status_flags['cs_in_air'])) < 0.5:
             airborne_annotations.append(
                 (in_air_transition_time, 'ground to air transition not detected'))
         else:
@@ -205,7 +211,7 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
                 (in_air_transition_time, 'in-air at {:.1f} sec'.format(in_air_transition_time)))
 
         data_plot = ControlModeSummaryPlot(
-            status_time, control_mode, [['airborne'], ['estimating_wind']],
+            status_flags_time, estimator_status_flags, [['cs_in_air'], ['cs_wind']],
             x_label='time (sec)', y_labels=['airborne', 'estimating wind'], annotation_text=[[], []],
             additional_annotation=[airborne_annotations, []],
             plot_title='EKF Control Status - Figure B', pdf_handle=pdf_pages)
@@ -214,15 +220,15 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
 
         # plot innovation_check_flags summary
         data_plot = CheckFlagsPlot(
-            status_time, innov_flags, [['vel_innov_fail', 'posh_innov_fail'], ['posv_innov_fail',
-                                                                               'hagl_innov_fail'],
-                                       ['magx_innov_fail', 'magy_innov_fail', 'magz_innov_fail',
-                                        'yaw_innov_fail'], ['tas_innov_fail'], ['sli_innov_fail'],
-                                       ['ofx_innov_fail',
-                                        'ofy_innov_fail']], x_label='time (sec)',
+            status_flags_time, estimator_status_flags, [['reject_hor_vel', 'reject_hor_pos'], ['reject_ver_vel', 'reject_ver_pos',
+                                                                               'reject_hagl'],
+                                       ['reject_mag_x', 'reject_mag_y', 'reject_mag_z',
+                                        'reject_yaw'], ['reject_airspeed'], ['reject_sideslip'],
+                                       ['reject_optflow_x',
+                                        'reject_optflow_y']], x_label='time (sec)',
             y_labels=['failed', 'failed', 'failed', 'failed', 'failed', 'failed'],
             y_lim=(-0.1, 1.1),
-            legend=[['vel NED', 'pos NE'], ['hgt absolute', 'hgt above ground'],
+            legend=[['vel NE', 'pos NE'], ['vel D', 'hgt absolute', 'hgt above ground'],
                     ['mag_x', 'mag_y', 'mag_z', 'yaw'], ['airspeed'], ['sideslip'],
                     ['flow X', 'flow Y']],
             plot_title='EKF Innovation Test Fails', annotate=False, pdf_handle=pdf_pages)
@@ -250,18 +256,32 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
         data_plot.save()
         data_plot.close()
 
+
         # Plot the EKF IMU vibration metrics
-        scaled_estimator_status = {'vibe[0]': 1000. * estimator_status['vibe[0]'],
-                                   'vibe[1]': 1000. * estimator_status['vibe[1]'],
-                                   'vibe[2]': estimator_status['vibe[2]']
-                                   }
-        data_plot = CheckFlagsPlot(
-            status_time, scaled_estimator_status, [['vibe[0]'], ['vibe[1]'], ['vibe[2]']],
-            x_label='time (sec)', y_labels=['Del Ang Coning (mrad)', 'HF Del Ang (mrad)',
-                                            'HF Del Vel (m/s)'], plot_title='IMU Vibration Metrics',
-            pdf_handle=pdf_pages, annotate=True)
-        data_plot.save()
-        data_plot.close()
+        for imu_status_instance in range(4):
+            try:
+                vehicle_imu_status_data = ulog.get_dataset('vehicle_imu_status', imu_status_instance).data
+
+                imu_status_time = 1e-6 * vehicle_imu_status_data['timestamp']
+
+                if vehicle_imu_status_data['accel_device_id'][0] == estimator_status['accel_device_id'][0]:
+
+                    scaled_estimator_status = {'delta_angle_coning_metric': 1000. * vehicle_imu_status_data['delta_angle_coning_metric'],
+                                               'gyro_vibration_metric': vehicle_imu_status_data['gyro_vibration_metric'],
+                                               'accel_vibration_metric': vehicle_imu_status_data['accel_vibration_metric']
+                                              }
+                    data_plot = CheckFlagsPlot(
+                        imu_status_time, scaled_estimator_status, [['delta_angle_coning_metric'], ['gyro_vibration_metric'], ['accel_vibration_metric']],
+                        x_label='time (sec)',
+                        y_labels=['Del Ang Coning (mrad^2)', 'HF Gyro (rad/s)', 'HF accel (m/s/s)'],
+                        plot_title='IMU Vibration Metrics',
+                        pdf_handle=pdf_pages, annotate=True)
+                    data_plot.save()
+                    data_plot.close()
+
+            except:
+                pass
+
 
         # Plot the EKF output observer tracking errors
         scaled_innovations = {
@@ -330,33 +350,33 @@ def create_pdf_report(ulog: ULog, multi_instance: int, output_plot_filename: str
         data_plot.close()
 
 
-def detect_airtime(control_mode, status_time):
+def detect_airtime(estimator_status_flags, status_flags_time):
     # define flags for starting and finishing in air
     b_starts_in_air = False
     b_finishes_in_air = False
     # calculate in-air transition time
-    if (np.amin(control_mode['airborne']) < 0.5) and (np.amax(control_mode['airborne']) > 0.5):
-        in_air_transtion_time_arg = np.argmax(np.diff(control_mode['airborne']))
-        in_air_transition_time = status_time[in_air_transtion_time_arg]
-    elif (np.amax(control_mode['airborne']) > 0.5):
-        in_air_transition_time = np.amin(status_time)
+    if (np.amin(estimator_status_flags['cs_in_air']) < 0.5) and (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
+        in_air_transtion_time_arg = np.argmax(np.diff(estimator_status_flags['cs_in_air']))
+        in_air_transition_time = status_flags_time[in_air_transtion_time_arg]
+    elif (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
+        in_air_transition_time = np.amin(status_flags_time)
         print('log starts while in-air at ' + str(round(in_air_transition_time, 1)) + ' sec')
         b_starts_in_air = True
     else:
         in_air_transition_time = float('NaN')
         print('always on ground')
     # calculate on-ground transition time
-    if (np.amin(np.diff(control_mode['airborne'])) < 0.0):
-        on_ground_transition_time_arg = np.argmin(np.diff(control_mode['airborne']))
-        on_ground_transition_time = status_time[on_ground_transition_time_arg]
-    elif (np.amax(control_mode['airborne']) > 0.5):
-        on_ground_transition_time = np.amax(status_time)
+    if (np.amin(np.diff(estimator_status_flags['cs_in_air'])) < 0.0):
+        on_ground_transition_time_arg = np.argmin(np.diff(estimator_status_flags['cs_in_air']))
+        on_ground_transition_time = status_flags_time[on_ground_transition_time_arg]
+    elif (np.amax(estimator_status_flags['cs_in_air']) > 0.5):
+        on_ground_transition_time = np.amax(status_flags_time)
         print('log finishes while in-air at ' + str(round(on_ground_transition_time, 1)) + ' sec')
         b_finishes_in_air = True
     else:
         on_ground_transition_time = float('NaN')
         print('always on ground')
-    if (np.amax(np.diff(control_mode['airborne'])) > 0.5) and (np.amin(np.diff(control_mode['airborne'])) < -0.5):
+    if (np.amax(np.diff(estimator_status_flags['cs_in_air'])) > 0.5) and (np.amin(np.diff(estimator_status_flags['cs_in_air'])) < -0.5):
         if ((on_ground_transition_time - in_air_transition_time) > 0.0):
             in_air_duration = on_ground_transition_time - in_air_transition_time
         else:

Tools/jmavsim_run.sh

@@ -5,12 +5,13 @@ set -e
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 cd "$SCRIPT_DIR/jMAVSim"
 
-tcp_port=4560
+port=4560
 extra_args=
 baudrate=921600
 device=
 ip="127.0.0.1"
-while getopts ":b:d:p:qsr:f:i:loat" opt; do
+protocol="tcp"
+while getopts ":b:d:u:p:qsr:f:i:loat" opt; do
 	case $opt in
 		b)
 			baudrate=$OPTARG
@@ -18,11 +19,14 @@ while getopts ":b:d:p:qsr:f:i:loat" opt; do
 		d)
 			device="$OPTARG"
 			;;
+		u)
+			protocol="udp"
+			;;
 		i)
 			ip="$OPTARG"
 			;;
 		p)
-			tcp_port=$OPTARG
+			port=$OPTARG
 			;;
 		q)
 			extra_args="$extra_args -qgc"
@@ -53,7 +57,11 @@ while getopts ":b:d:p:qsr:f:i:loat" opt; do
 done
 
 if [ "$device" == "" ]; then
-	device="-tcp $ip:$tcp_port"
+	if [ "$protocol" == "tcp" ]; then
+		device="-tcp $ip:$port"
+	else
+		device="-udp $port"
+	fi
 else
 	device="-serial $device $baudrate"
 fi

Tools/kconfig/board_cmake_to_kconfig.py

@@ -1,72 +0,0 @@
-#!/bin/python3
-
-import parse_cmake.parsing as cmp
-import glob
-import pprint
-import re
-import os
-
-__location__ = os.path.realpath(
-    os.path.join(os.getcwd(), os.path.dirname(__file__)))
-
-serial_regex = r"(\D\D\D\d):(/dev/ttyS\d+)"
-io_regex = r"IO (.*)"
-romfs_regex = r"ROMFSROOT (.*)"
-arch_regex = r"ARCHITECTURE (.*)"
-toolchain_regex = r"TOOLCHAIN (.*)"
-
-
-
-def stripComments(code):
-    code = str(code)
-    return re.sub(r'(?m) *#.*\n?', '', code)
-
-lut = {}
-with open(os.path.join(__location__, "cmake_kconfig_lut.txt"),'r') as lookup:
-    for line in lookup:
-        if ',' in line:
-            key, value = line.strip().split(',')
-            lut[key] = value
-
-#for name in glob.glob('boards/*/*/*.cmake'):
-px4_dir = os.path.abspath(os.path.join(os.path.dirname(__file__), '../../'))
-
-for name in glob.glob(px4_dir + '/boards/*/*/*.cmake'):
-    print(name)
-    with open(name, 'r') as f:
-        romfs_set = False
-        w = open(name.replace(".cmake",".px4board"), "w")
-        for line in f:
-            clean_line = stripComments(line.strip())
-            value = lut.get(clean_line)
-            if value is not None:
-                print(value, file=w)
-                print(value)
-            else:
-                matches = re.finditer(serial_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_SERIAL_" + match.groups()[0] + "=\"" + match.groups()[1] + "\"")
-                    print("CONFIG_BOARD_SERIAL_" + match.groups()[0] + "=\"" + match.groups()[1] + "\"", file=w)
-                matches = re.finditer(io_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_IO=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_IO=\"" + match.groups()[0] + "\"", file=w)
-                matches = re.finditer(romfs_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_ROMFSROOT=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_ROMFSROOT=\"" + match.groups()[0] + "\"", file=w)
-                    romfs_set = True
-                matches = re.finditer(arch_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_ARCHITECTURE=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_ARCHITECTURE=\"" + match.groups()[0] + "\"", file=w)
-                matches = re.finditer(toolchain_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_TOOLCHAIN=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_TOOLCHAIN=\"" + match.groups()[0] + "\"", file=w)
-
-    if(romfs_set == False):
-        print("CONFIG_BOARD_ROMFSROOT=\"\"", file=w)
-
-
-    w.close()

Tools/kconfig/cmake_kconfig_lut.txt

@@ -1,203 +0,0 @@
-PLATFORM nuttx,CONFIG_PLATFORM_NUTTX=y
-PLATFORM posix,CONFIG_PLATFORM_POSIX=y
-CONSTRAINED_MEMORY,CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONSTRAINED_FLASH,CONFIG_BOARD_CONSTRAINED_FLASH=y
-NO_HELP,CONFIG_BOARD_NO_HELP=y
-EXTERNAL_METADATA,CONFIG_BOARD_EXTERNAL_METADATA=y
-BUILD_BOOTLOADER,CONFIG_BOARD_BUILD_BOOTLOADER=y
-UAVCAN_INTERFACES 2,CONFIG_BOARD_UAVCAN_INTERFACES=2
-UAVCAN_INTERFACES 1,CONFIG_BOARD_UAVCAN_INTERFACES=1
-UAVCAN_TIMER_OVERRIDE 2,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
-UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=1
-UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=0
-TESTING,CONFIG_BOARD_TESTING=y
-ETHERNET,CONFIG_BOARD_ETHERNET=y
-adc/ads1115,CONFIG_DRIVERS_ADC_ADS1115=y
-adc/board_adc,CONFIG_DRIVERS_ADC_BOARD_ADC=y
-barometer,CONFIG_COMMON_BAROMETERS=y
-barometer/bmp280,CONFIG_DRIVERS_BAROMETER_BMP280=y
-barometer/bmp388,CONFIG_DRIVERS_BAROMETER_BMP388=y
-barometer/dps310,CONFIG_DRIVERS_BAROMETER_DPS310=y
-barometer/lps22hb,CONFIG_DRIVERS_BAROMETER_LPS22HB=y
-barometer/lps25h,CONFIG_DRIVERS_BAROMETER_LPS25H=y
-barometer/lps33hw,CONFIG_DRIVERS_BAROMETER_LPS33HW=y
-barometer/mpl3115a2,CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
-barometer/ms5611,CONFIG_DRIVERS_BAROMETER_MS5611=y
-barometer/tcbp001ta,CONFIG_DRIVERS_BAROMETER_TCBP001TA=y
-batt_smbus,CONFIG_DRIVERS_BATT_SMBUS=y
-bootloaders,CONFIG_DRIVERS_BOOTLOADERS=y
-camera_capture,CONFIG_DRIVERS_CAMERA_CAPTURE=y
-camera_trigger,CONFIG_DRIVERS_CAMERA_TRIGGER=y
-differential_pressure,CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE=y
-distance_sensor,CONFIG_COMMON_DISTANCE_SENSOR=y
-distance_sensor/ll40ls,CONFIG_DRIVERS_DISTANCE_SENSOR_LL40LS=y
-distance_sensor/lightware_laser_serial,CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_SERIAL=y
-distance_sensor/broadcom/afbrs50,CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
-distance_sensor/vl53l0x,CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
-distance_sensor/vl53l1x,CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L1X=y
-distance_sensor/srf05,CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
-dshot,CONFIG_DRIVERS_DSHOT=y
-gps,CONFIG_DRIVERS_GPS=y
-heater,CONFIG_DRIVERS_HEATER=y
-imu,CONFIG_COMMON_IMU=y
-imu/adis16477,CONFIG_DRIVERS_IMU_ADIS16477=y
-imu/adis16497,CONFIG_DRIVERS_IMU_ADIS16497=y
-imu/analog_devices/adis16448,CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
-imu/analog_devices/adis16470,CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16470=y
-imu/bosch/bmi055,CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
-imu/bosch/bmi088,CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
-imu/fxas21002c,CONFIG_DRIVERS_IMU_FXAS21002C=y
-imu/fxos8701cq,CONFIG_DRIVERS_IMU_FXOS8701CQ=y
-imu/invensense/icm20602,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
-imu/invensense/icm20608g,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20608G=y
-imu/invensense/icm20649,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20649=y
-imu/invensense/icm20689,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
-imu/invensense/icm20948,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
-imu/invensense/icm40609d,CONFIG_DRIVERS_IMU_INVENSENSE_ICM40609D=y
-imu/invensense/icm42605,CONFIG_DRIVERS_IMU_INVENSENSE_ICM42605=y
-imu/invensense/icm42688p,CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
-imu/invensense/mpu6000,CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
-imu/invensense/mpu6500,CONFIG_DRIVERS_IMU_INVENSENSE_MPU6500=y
-imu/invensense/mpu9250,CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
-imu/l3gd20,CONFIG_DRIVERS_IMU_L3GD20=y
-imu/lsm303d,CONFIG_DRIVERS_IMU_LSM303D=y
-imu/st,CONFIG_DRIVERS_IMU_ST=y
-irlock,CONFIG_DRIVERS_IRLOCK=y
-lights,CONFIG_COMMON_LIGHT=y
-lights/neopixel,CONFIG_DRIVERS_LIGHTS_NEOPIXEL=y
-lights/rgbled,CONFIG_DRIVERS_LIGHTS_RGBLED=y
-lights/rgbled_ncp5623c,CONFIG_DRIVERS_LIGHTS_RGBLED_NCP5623C=y
-lights/rgbled_pwm,CONFIG_DRIVERS_LIGHTS_RGBLED_PWM=y
-magnetometer,CONFIG_COMMON_MAGNETOMETER=y
-magnetometer/akm/ak09916,CONFIG_DRIVERS_MAGNETOMETER_AKM_AK09916=y
-magnetometer/akm/ak8963,CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
-magnetometer/bosch/bmm150,CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
-magnetometer/hmc5883,CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
-magnetometer/isentek/ist8308,CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8308=y
-magnetometer/isentek/ist8310,CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
-magnetometer/lis2mdl,CONFIG_DRIVERS_MAGNETOMETER_LIS2MDL=y
-magnetometer/lis3mdl,CONFIG_DRIVERS_MAGNETOMETER_LIS3MDL=y
-magnetometer/lsm303agr,CONFIG_DRIVERS_MAGNETOMETER_LSM303AGR=y
-magnetometer/lsm9ds1_mag,CONFIG_DRIVERS_MAGNETOMETER_LSM9DS1_MAG=y
-magnetometer/qmc5883l,CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
-magnetometer/rm3100,CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
-magnetometer/vtrantech/vcm1193l,CONFIG_DRIVERS_MAGNETOMETER_VTRANTECH_VCM1193L=y
-optical_flow,CONFIG_COMMON_OPTICAL_FLOW=y
-optical_flow/paw3902,CONFIG_DRIVERS_OPTICAL_FLOW_PAW3902=y
-optical_flow/paw3901,CONFIG_DRIVERS_OPTICAL_FLOW_PMW3901=y
-optical_flow/px4flow,CONFIG_DRIVERS_OPTICAL_FLOW_PX4FLOW=y
-optical_flow/thoneflow,CONFIG_DRIVERS_OPTICAL_FLOW_THONEFLOW=y
-osd,CONFIG_DRIVERS_OSD=y
-pca9685,CONFIG_DRIVERS_PCA9685=y
-pca9685_pwm_out,CONFIG_DRIVERS_PCA9685_PWM_OUT=y
-power_monitor/ina226,CONFIG_DRIVERS_POWER_MONITOR_INA226=y
-power_monitor/voxlpm,CONFIG_DRIVERS_POWER_MONITOR_VOXLPM=y
-pps_capture,CONFIG_DRIVERS_PPS_CAPTURE=y
-protocol_splitter,CONFIG_DRIVERS_PROTOCOL_SPLITTER=y
-pwm_input,CONFIG_DRIVERS_PWM_INPUT=y
-pwm_out_sim,CONFIG_DRIVERS_PWM_OUT_SIM=y
-pwm_out,CONFIG_DRIVERS_PWM_OUT=y
-px4io,CONFIG_DRIVERS_PX4IO=y
-rc_input,CONFIG_DRIVERS_RC_INPUT=y
-roboclaw,CONFIG_DRIVERS_ROBOCLAW=y
-rpi_rc_in,CONFIG_DRIVERS_RPI_RC_IN=y
-rpm,CONFIG_DRIVERS_RPM=y
-safety_button,CONFIG_DRIVERS_SAFETY_BUTTON=y
-smart_battery/batmon,CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
-spektrum_rc,CONFIG_DRIVERS_SPEKTRUM_RC=y
-telemetry,CONFIG_DRIVERS_TELEMETRY=y
-test_ppm,CONFIG_DRIVERS_TEST_PPM=y
-tone_alarm,CONFIG_DRIVERS_TONE_ALARM=y
-uavcan,CONFIG_DRIVERS_UAVCAN=y
-uavcannode,CONFIG_DRIVERS_UAVCANNODE=y
-uavcannode_gps_demo,CONFIG_DRIVERS_UAVCANNODE_GPS_DEMO=y
-airship_att_control,CONFIG_MODULES_AIRSHIP_ATT_CONTROL=y
-airspeed_selector,CONFIG_MODULES_AIRSPEED_SELECTOR=y
-velocity_controller,CONFIG_MODULES_ANGULAR_VELOCITY_CONTROLLER=y
-attitude_estimator_q,CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
-battery_status,CONFIG_MODULES_BATTERY_STATUS=y
-camera_feedback,CONFIG_MODULES_CAMERA_FEEDBACK=y
-commander,CONFIG_MODULES_COMMANDER=y
-control_allocator,CONFIG_MODULES_CONTROL_ALLOCATOR=y
-dataman,CONFIG_MODULES_DATAMAN=y
-ekf2,CONFIG_MODULES_EKF2=y
-esc_battery,CONFIG_MODULES_ESC_BATTERY=y
-events,CONFIG_MODULES_EVENTS=y
-flight_mode_manager,CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-fw_att_control,CONFIG_MODULES_FW_ATT_CONTROL=y
-fw_pos_control_l1,CONFIG_MODULES_FW_POS_CONTROL_L1=y
-gyro_calibration,CONFIG_MODULES_GYRO_CALIBRATION=y
-gyro_fft,CONFIG_MODULES_GYRO_FFT=y
-land_detector,CONFIG_MODULES_LAND_DETECTOR=y
-landing_target_estimator,CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-load_mon,CONFIG_MODULES_LOAD_MON=y
-local_position_estimator,CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
-logger,CONFIG_MODULES_LOGGER=y
-mavlink,CONFIG_MODULES_MAVLINK=y
-mc_att_control,CONFIG_MODULES_MC_ATT_CONTROL=y
-mc_hover_thrust_estimator,CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-mc_pos_control,CONFIG_MODULES_MC_POS_CONTROL=y
-mc_rate_control,CONFIG_MODULES_MC_RATE_CONTROL=y
-micrortps_bridge,CONFIG_MODULES_MICRORTPS_BRIDGE=y
-navigator,CONFIG_MODULES_NAVIGATOR=y
-px4iofirmware,CONFIG_MODULES_PX4IOFIRMWARE=y
-rc_update,CONFIG_MODULES_RC_UPDATE=y
-replay,CONFIG_MODULES_REPLAY=y
-rover_pos_control,CONFIG_MODULES_ROVER_POS_CONTROL=y
-sensors,CONFIG_MODULES_SENSORS=y
-sih,CONFIG_MODULES_SIH=y
-simulator,CONFIG_MODULES_SIMULATOR=y
-temperature_compensation,CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-uuv_att_control,CONFIG_MODULES_UUV_ATT_CONTROL=y
-uuv_pos_control,CONFIG_MODULES_UUV_POS_CONTROL=y
-gimbal,CONFIG_MODULES_GIMBAL=y
-vtol_att_control,CONFIG_MODULES_VTOL_ATT_CONTROL=y
-bl_update,CONFIG_SYSTEMCMDS_BL_UPDATE=y
-dmesg,CONFIG_SYSTEMCMDS_DMESG=y
-dumpfile,CONFIG_SYSTEMCMDS_DUMPFILE=y
-dyn,CONFIG_SYSTEMCMDS_DYN=y
-failure,CONFIG_SYSTEMCMDS_FAILURE=y
-gpio,CONFIG_SYSTEMCMDS_GPIO=y
-hardfault_log,CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-i2cdetect,CONFIG_SYSTEMCMDS_I2CDETECT=y
-led_control,CONFIG_SYSTEMCMDS_LED_CONTROL=y
-mft,CONFIG_SYSTEMCMDS_MFT=y
-microbench,CONFIG_SYSTEMCMDS_MICROBENCH=y
-mixer,CONFIG_SYSTEMCMDS_MIXER=y
-motor_test,CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-mtd,CONFIG_SYSTEMCMDS_MTD=y
-netman,CONFIG_SYSTEMCMDS_NETMAN=y
-nshterm,CONFIG_SYSTEMCMDS_NSHTERM=y
-param,CONFIG_SYSTEMCMDS_PARAM=y
-perf,CONFIG_SYSTEMCMDS_PERF=y
-pwm,CONFIG_SYSTEMCMDS_PWM=y
-reboot,CONFIG_SYSTEMCMDS_REBOOT=y
-reflect,CONFIG_SYSTEMCMDS_REFLECT=y
-sd_bench,CONFIG_SYSTEMCMDS_SD_BENCH=y
-serial_tet,CONFIG_SYSTEMCMDS_SERIAL_TEST=y
-shutdown,CONFIG_SYSTEMCMDS_SHUTDOWN=y
-system_time,CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-tests,CONFIG_SYSTEMCMDS_TESTS=y
-top,CONFIG_SYSTEMCMDS_TOP=y
-topic_listener,CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-tune_control,CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-uorb,CONFIG_SYSTEMCMDS_UORB=y
-usb_connected,CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-ver,CONFIG_SYSTEMCMDS_VER=y
-work_queue,CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-dyn_hello,CONFIG_EXAMPLES_DYN_HELLO=y
-fake_gps,CONFIG_EXAMPLES_FAKE_GPS=y
-fake_gyro,CONFIG_EXAMPLES_FAKE_GYRO=y
-fake_imu,CONFIG_EXAMPLES_FAKE_IMU=y
-fake_magnetometer,CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
-fixedwing_control,CONFIG_EXAMPLES_FIXEDWING_CONTROL=y
-hello,CONFIG_EXAMPLES_HELLO=y
-hwtest,CONFIG_EXAMPLES_HWTEST=y
-matlab_csv_serial,CONFIG_EXAMPLES_MATLAB_CSV_SERIAL=y
-px4_mavlink_debug,CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
-px4_simple_app,CONFIG_EXAMPLES_PX4_SIMPLE_APP=y
-rover_steering_control,CONFIG_EXAMPLES_ROVER_STEERING_CONTROL=y
-uuv_example_app,CONFIG_EXAMPLES_UUV_EXAMPLE_APP=y
-work_item,CONFIG_EXAMPLES_WORK_ITEM=y
-add_compile_options(-Wno-narrowing),CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
--D__PX4_LINUX,CONFIG_BOARD_LINUX=y

Tools/px4moduledoc/srcparser.py

@@ -16,7 +16,7 @@ class ModuleDocumentation(object):
     valid_categories = ['driver', 'estimator', 'controller', 'system',
                         'communication', 'command', 'template', 'simulation', 'autotune']
     valid_subcategories = ['', 'distance_sensor', 'imu', 'airspeed_sensor',
-                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor']
+                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor', 'transponder']
 
     max_line_length = 80 # wrap lines that are longer than this
 

Tools/setup/ubuntu.sh

@@ -200,13 +200,12 @@ if [[ $INSTALL_SIM == "true" ]]; then
 
 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		java_version=11
-		gazebo_version=9
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		java_version=13
-		gazebo_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		java_version=11
 	else
 		java_version=14
-		gazebo_version=11
 	fi
 	# Java (jmavsim or fastrtps)
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -220,20 +219,30 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
 
 	# Gazebo
+	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+		gazebo_version=9
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		gazebo_packages="gazebo libgazebo-dev"
+	else
+		# default and Ubuntu 20.04
+		gazebo_version=11
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	fi
+
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
 	sudo apt-get update -y --quiet
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		dmidecode \
-		gazebo$gazebo_version \
+		$gazebo_packages \
 		gstreamer1.0-plugins-bad \
 		gstreamer1.0-plugins-base \
 		gstreamer1.0-plugins-good \
 		gstreamer1.0-plugins-ugly \
 		gstreamer1.0-libav \
 		libeigen3-dev \
-		libgazebo$gazebo_version-dev \
 		libgstreamer-plugins-base1.0-dev \
 		libimage-exiftool-perl \
 		libopencv-dev \

Tools/sitl_gazebo

@@ -1 +1 @@
-Subproject commit 25138e803ee8525ee5fe4e6d511506e88e3f819c
+Subproject commit 5610c3fb441a2f3babc8ad7a63c8c4ce3e40abfa

Tools/sitl_run.sh

@@ -74,6 +74,9 @@ if [ "$model" == "" ] || [ "$model" == "none" ]; then
 	if [ "$program" == "jsbsim" ]; then
 		echo "empty model, setting rascal as default for jsbsim"
 		model="rascal"
+	elif [ "$program" == "sihsim" ]; then
+		echo "empty model, setting quadx as default for sihsim"
+		model="quadx"
 	else
 		echo "empty model, setting iris as default"
 		model="iris"
@@ -214,6 +217,12 @@ elif [ "$program" == "jsbsim" ] && [ -z "$no_sim" ]; then
 	fi
 	"${build_path}/build_jsbsim_bridge/jsbsim_bridge" ${model} -s "${src_path}/Tools/jsbsim_bridge/scene/${world}.xml" 2> /dev/null &
 	JSBSIM_PID=$!
+elif [ "$program" == "sihsim" ] && [ ! -n "$no_sim" ]; then
+	export SIM_MODE="sihsim"
+	if [ "$model" != "airplane" ] && [ "$model" != "quadx" ] && [ "$model" != "xvert" ]; then
+		echo "Model ${model} not compatible with with sih. sih supports [quadx,airplane,xvert]."
+		exit 1
+	fi
 fi
 
 pushd "$rootfs" >/dev/null

boards/airmind/mindpx-v2/nuttx-config/include/board.h

@@ -40,11 +40,11 @@
 /************************************************************************************
  * Included Files
  ************************************************************************************/
-#include "board_dma_map.h"
-
 #include <nuttx/config.h>
+
+#include "board_dma_map.h"
 #ifndef __ASSEMBLY__
-# include <stdint.h>
+#include <stdint.h>
 #endif
 
 #include <stm32.h>
@@ -83,11 +83,11 @@
  * LSE - not installed
  */
 
-#define STM32_BOARD_XTAL        8000000ul
+#define STM32_BOARD_XTAL 8000000ul
 
-#define STM32_HSI_FREQUENCY     16000000ul
-#define STM32_LSI_FREQUENCY     32000
-#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_HSI_FREQUENCY 16000000ul
+#define STM32_LSI_FREQUENCY 32000
+#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL
 //#define STM32_LSE_FREQUENCY     32768
 
 /* Main PLL Configuration.
@@ -103,68 +103,68 @@
  *         = 48,000,000
  */
 
-#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
-#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
-#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
-#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)
+#define STM32_PLLCFG_PLLM RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN RCC_PLLCFG_PLLN(336)
+#define STM32_PLLCFG_PLLP RCC_PLLCFG_PLLP_2
+#define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7)
 
-#define STM32_SYSCLK_FREQUENCY  168000000ul
+#define STM32_SYSCLK_FREQUENCY 168000000ul
 
 /* AHB clock (HCLK) is SYSCLK (168MHz) */
 
-#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
-#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
-#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
+#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
 
 /* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
 
-#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
-#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
+#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */
+#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY / 4)
 
 /* Timers driven from APB1 will be twice PCLK1 */
 
-#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
-#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM2_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN (2 * STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN (2 * STM32_PCLK1_FREQUENCY)
 
 /* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
 
-#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
-#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY / 2)
 
 /* Timers driven from APB2 will be twice PCLK2 */
 
-#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
-#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM1_CLKIN (2 * STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN (2 * STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN (2 * STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN (2 * STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN (2 * STM32_PCLK2_FREQUENCY)
 
 /* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
  * otherwise frequency is 2xAPBx.
  * Note: TIM1,8-11 are on APB2, others on APB1
  */
 
-#define BOARD_TIM1_FREQUENCY    STM32_APB2_TIM1_CLKIN
-#define BOARD_TIM2_FREQUENCY    STM32_APB1_TIM2_CLKIN
-#define BOARD_TIM3_FREQUENCY    STM32_APB1_TIM3_CLKIN
-#define BOARD_TIM4_FREQUENCY    STM32_APB1_TIM4_CLKIN
-#define BOARD_TIM5_FREQUENCY    STM32_APB1_TIM5_CLKIN
-#define BOARD_TIM6_FREQUENCY    STM32_APB1_TIM6_CLKIN
-#define BOARD_TIM7_FREQUENCY    STM32_APB1_TIM7_CLKIN
-#define BOARD_TIM8_FREQUENCY    STM32_APB2_TIM8_CLKIN
-#define BOARD_TIM9_FREQUENCY    STM32_APB2_TIM9_CLKIN
-#define BOARD_TIM10_FREQUENCY   STM32_APB2_TIM10_CLKIN
-#define BOARD_TIM11_FREQUENCY   STM32_APB2_TIM11_CLKIN
-#define BOARD_TIM12_FREQUENCY   STM32_APB1_TIM12_CLKIN
-#define BOARD_TIM13_FREQUENCY   STM32_APB1_TIM13_CLKIN
-#define BOARD_TIM14_FREQUENCY   STM32_APB1_TIM14_CLKIN
+#define BOARD_TIM1_FREQUENCY STM32_APB2_TIM1_CLKIN
+#define BOARD_TIM2_FREQUENCY STM32_APB1_TIM2_CLKIN
+#define BOARD_TIM3_FREQUENCY STM32_APB1_TIM3_CLKIN
+#define BOARD_TIM4_FREQUENCY STM32_APB1_TIM4_CLKIN
+#define BOARD_TIM5_FREQUENCY STM32_APB1_TIM5_CLKIN
+#define BOARD_TIM6_FREQUENCY STM32_APB1_TIM6_CLKIN
+#define BOARD_TIM7_FREQUENCY STM32_APB1_TIM7_CLKIN
+#define BOARD_TIM8_FREQUENCY STM32_APB2_TIM8_CLKIN
+#define BOARD_TIM9_FREQUENCY STM32_APB2_TIM9_CLKIN
+#define BOARD_TIM10_FREQUENCY STM32_APB2_TIM10_CLKIN
+#define BOARD_TIM11_FREQUENCY STM32_APB2_TIM11_CLKIN
+#define BOARD_TIM12_FREQUENCY STM32_APB1_TIM12_CLKIN
+#define BOARD_TIM13_FREQUENCY STM32_APB1_TIM13_CLKIN
+#define BOARD_TIM14_FREQUENCY STM32_APB1_TIM14_CLKIN
 
 /* SDIO dividers.  Note that slower clocking is required when DMA is disabled
  * in order to avoid RX overrun/TX underrun errors due to delayed responses
@@ -174,16 +174,16 @@
  * SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
  */
 
-#define SDIO_INIT_CLKDIV        (118 << SDIO_CLKCR_CLKDIV_SHIFT)
+#define SDIO_INIT_CLKDIV (118 << SDIO_CLKCR_CLKDIV_SHIFT)
 
 /* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
  * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
  */
 
 #ifdef CONFIG_STM32_SDIO_DMA
-#  define SDIO_MMCXFR_CLKDIV    (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
 #else
-#  define SDIO_MMCXFR_CLKDIV    (2 << SDIO_CLKCR_CLKDIV_SHIFT)
+#define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
 #endif
 
 /* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
@@ -191,9 +191,9 @@
  */
 
 #ifdef CONFIG_STM32_SDIO_DMA
-#  define SDIO_SDXFR_CLKDIV     (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
 #else
-#  define SDIO_SDXFR_CLKDIV     (2 << SDIO_CLKCR_CLKDIV_SHIFT)
+#define SDIO_SDXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
 #endif
 
 /* Alternate function pin selections ************************************************/
@@ -201,27 +201,27 @@
 /*
  * UARTs.
  */
-#define GPIO_USART1_RX	GPIO_USART1_RX_2	/* RC_INPUT */
-#define GPIO_USART1_TX	GPIO_USART1_TX_2
+#define GPIO_USART1_RX GPIO_USART1_RX_2 /* RC_INPUT */
+#define GPIO_USART1_TX GPIO_USART1_TX_2
 
-#define GPIO_USART2_RX	GPIO_USART2_RX_2
-#define GPIO_USART2_TX	GPIO_USART2_TX_2
-#define GPIO_USART2_RTS	GPIO_USART2_RTS_2
-#define GPIO_USART2_CTS	GPIO_USART2_CTS_2
+#define GPIO_USART2_RX GPIO_USART2_RX_2
+#define GPIO_USART2_TX GPIO_USART2_TX_2
+#define GPIO_USART2_RTS GPIO_USART2_RTS_2
+#define GPIO_USART2_CTS GPIO_USART2_CTS_2
 
-#define GPIO_USART3_RX	GPIO_USART3_RX_3
-#define GPIO_USART3_TX	GPIO_USART3_TX_3
-#define GPIO_USART3_CTS	0 // unused
-#define GPIO_USART3_RTS	0 // unused
+#define GPIO_USART3_RX GPIO_USART3_RX_3
+#define GPIO_USART3_TX GPIO_USART3_TX_3
+#define GPIO_USART3_CTS 0  // unused
+#define GPIO_USART3_RTS 0  // unused
 
-#define GPIO_UART4_RX	GPIO_UART4_RX_1
-#define GPIO_UART4_TX	GPIO_UART4_TX_1
+#define GPIO_UART4_RX GPIO_UART4_RX_1
+#define GPIO_UART4_TX GPIO_UART4_TX_1
 
-#define GPIO_USART6_RX	GPIO_USART6_RX_2
-#define GPIO_USART6_TX	GPIO_USART6_TX_2
+#define GPIO_USART6_RX GPIO_USART6_RX_2
+#define GPIO_USART6_TX GPIO_USART6_TX_2
 
-#define GPIO_UART7_RX	GPIO_UART7_RX_1
-#define GPIO_UART7_TX	GPIO_UART7_TX_1
+#define GPIO_UART7_RX GPIO_UART7_RX_1
+#define GPIO_UART7_TX GPIO_UART7_TX_1
 
 /* UART8 has no alternate pin config */
 
@@ -230,8 +230,8 @@
  *
  * CAN1 is routed to the onboard transceiver.
  */
-#define GPIO_CAN1_RX	GPIO_CAN1_RX_3
-#define GPIO_CAN1_TX	GPIO_CAN1_TX_3
+#define GPIO_CAN1_RX GPIO_CAN1_RX_3
+#define GPIO_CAN1_TX GPIO_CAN1_TX_3
 
 /*
  * I2C
@@ -240,32 +240,31 @@
  * reset the bus to clear stuck slaves.  They match the pin configuration,
  * but are normally-high GPIOs.
  */
-#define GPIO_I2C1_SCL		GPIO_I2C1_SCL_2
-#define GPIO_I2C1_SDA		GPIO_I2C1_SDA_2
-#define GPIO_I2C1_SCL_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN8)
-#define GPIO_I2C1_SDA_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN9)
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2
+#define GPIO_I2C1_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
 
-#define GPIO_I2C2_SCL		GPIO_I2C2_SCL_1
-#define GPIO_I2C2_SDA		GPIO_I2C2_SDA_1
-#define GPIO_I2C2_SCL_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN10)
-#define GPIO_I2C2_SDA_GPIO	(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN11)
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1
+#define GPIO_I2C2_SCL_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+#define GPIO_I2C2_SDA_GPIO (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
 
 /*
  * SPI
  *
  * There are sensors on SPI1, and SPI2 is connected to the FRAM.
  */
-#define GPIO_SPI1_MISO	(GPIO_SPI1_MISO_1|GPIO_SPEED_50MHz)
-#define GPIO_SPI1_MOSI	(GPIO_SPI1_MOSI_2|GPIO_SPEED_50MHz)
-#define GPIO_SPI1_SCK	(GPIO_SPI1_SCK_1|GPIO_SPEED_50MHz)
+#define GPIO_SPI1_MISO (GPIO_SPI1_MISO_1 | GPIO_SPEED_50MHz)
+#define GPIO_SPI1_MOSI (GPIO_SPI1_MOSI_2 | GPIO_SPEED_50MHz)
+#define GPIO_SPI1_SCK (GPIO_SPI1_SCK_1 | GPIO_SPEED_50MHz)
 
-#define GPIO_SPI2_MISO	(GPIO_SPI2_MISO_1|GPIO_SPEED_50MHz)
-#define GPIO_SPI2_MOSI	(GPIO_SPI2_MOSI_1|GPIO_SPEED_50MHz)
-#define GPIO_SPI2_SCK	(GPIO_SPI2_SCK_2|GPIO_SPEED_50MHz)
+#define GPIO_SPI2_MISO (GPIO_SPI2_MISO_1 | GPIO_SPEED_50MHz)
+#define GPIO_SPI2_MOSI (GPIO_SPI2_MOSI_1 | GPIO_SPEED_50MHz)
+#define GPIO_SPI2_SCK (GPIO_SPI2_SCK_2 | GPIO_SPEED_50MHz)
 
-#define GPIO_SPI4_MISO	(GPIO_SPI4_MISO_1|GPIO_SPEED_50MHz)
-#define GPIO_SPI4_MOSI	(GPIO_SPI4_MOSI_1|GPIO_SPEED_50MHz)
-#define GPIO_SPI4_SCK	(GPIO_SPI4_SCK_1|GPIO_SPEED_50MHz)
+#define GPIO_SPI4_MISO (GPIO_SPI4_MISO_1 | GPIO_SPEED_50MHz)
+#define GPIO_SPI4_MOSI (GPIO_SPI4_MOSI_1 | GPIO_SPEED_50MHz)
+#define GPIO_SPI4_SCK (GPIO_SPI4_SCK_1 | GPIO_SPEED_50MHz)
 
-
-#endif  /* __ARCH_BOARD_BOARD_H */
+#endif /* __ARCH_BOARD_BOARD_H */

boards/airmind/mindpx-v2/nuttx-config/include/board_dma_map.h

@@ -33,55 +33,61 @@
 
 #pragma once
 
-
 /*
-|    DMA1    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
+|    DMA1    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5
+| Stream 6         | Stream 7         |
 |------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
-| Channel 0  | SPI3_RX_1        | -                | SPI3_RX_2        | SPI2_RX          | SPI2_TX          | SPI3_TX_1        | -                | SPI3_TX_2        |
-| Channel 1  | I2C1_RX          | -                | TIM7_UP_1        |  -               | TIM7_UP_2        | I2C1_RX_1        | I2C1_TX          | I2C1_TX_1        |
-| Channel 2  | TIM4_CH1         | -                | I2C4_RX          | TIM4_CH2         | -                | I2C4_RX          | TIM4_UP          | TIM4_CH3         |
-| Channel 3  | -                | TIM2_UP_1        | I2C3_RX_1        | I2C2_EXT_RX      | I2C3_TX          | TIM2_CH1         | TIM2_CH2         | TIM2_UP_2        |
-|            |                  |   TIM2_CH3       |                  |                  |                  |                  |   TIM2_CH4_1     |   TIM2_CH4_2     |
-| Channel 4  | UART5_RX         | USART3_RX        | UART4_RX         | USART3_TX_1      | UART4_TX         | USART2_RX        | USART2_TX        | UART5_TX         |
-| Channel 5  | UART8_TX         | UART7_TX         | TIM3_CH4         | UART7_RX         | TIM3_CH1         | TIM3_CH2         | UART8_RX         | TIM3_CH3         |
-|            |                  |                  |   TIM3_UP        |                  |   TIM3_TRIG      |                  |                  |                  |
-| Channel 6  | TIM5_CH3         | TIM5_CH4_1       | TIM5_CH1         | TIM5_CH4_2       | TIM5_CH2         | -                | TIM5_UP_2        | -                |
-|            |   TIM5_UP_1      |   TIM5_TRIG_1    |                  |   TIM5_TRIG_2    |                  |                  |                  |                  |
-| Channel 7  | -                | TIM6_UP          | I2C2_RX          | I2C2_RX_1        | USART3_TX_2      | DAC1             | DAC2             | I2C2_TX          |
-|            |                  |                  |                  |                  |                  |                  |                  |                  |
-| Usage      |                  |                  |                  |                  |                  |                  |                  |                  |
+| Channel 0  | SPI3_RX_1        | -                | SPI3_RX_2        | SPI2_RX          | SPI2_TX          | SPI3_TX_1
+| -                | SPI3_TX_2        | | Channel 1  | I2C1_RX          | -                | TIM7_UP_1        |  - |
+TIM7_UP_2        | I2C1_RX_1        | I2C1_TX          | I2C1_TX_1        | | Channel 2  | TIM4_CH1         | - |
+I2C4_RX          | TIM4_CH2         | -                | I2C4_RX          | TIM4_UP          | TIM4_CH3         | |
+Channel 3  | -                | TIM2_UP_1        | I2C3_RX_1        | I2C2_EXT_RX      | I2C3_TX          | TIM2_CH1 |
+TIM2_CH2         | TIM2_UP_2        | |            |                  |   TIM2_CH3       |                  | | | |
+TIM2_CH4_1     |   TIM2_CH4_2     | | Channel 4  | UART5_RX         | USART3_RX        | UART4_RX         | USART3_TX_1
+| UART4_TX         | USART2_RX        | USART2_TX        | UART5_TX         | | Channel 5  | UART8_TX         | UART7_TX
+| TIM3_CH4         | UART7_RX         | TIM3_CH1         | TIM3_CH2         | UART8_RX         | TIM3_CH3         | | |
+|                  |   TIM3_UP        |                  |   TIM3_TRIG      |                  |                  | | |
+Channel 6  | TIM5_CH3         | TIM5_CH4_1       | TIM5_CH1         | TIM5_CH4_2       | TIM5_CH2         | - |
+TIM5_UP_2        | -                | |            |   TIM5_UP_1      |   TIM5_TRIG_1    |                  |
+TIM5_TRIG_2    |                  |                  |                  |                  | | Channel 7  | - | TIM6_UP
+| I2C2_RX          | I2C2_RX_1        | USART3_TX_2      | DAC1             | DAC2             | I2C2_TX          | | |
+|                  |                  |                  |                  |                  |                  | | |
+Usage      |                  |                  |                  |                  |                  | | | |
 
 
-|    DMA2    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
+|    DMA2    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5
+| Stream 6         | Stream 7         |
 |------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
-| Channel 0  | ADC1_1           | SAI1_A           | TIM8_CH1_1       | SAI1_A_1         | ADC1_2           | SAI1_B_1         | TIM1_CH1_1       | -                |
-|            |                  |                  |   TIM8_CH2_1     |                  |                  |                  |   TIM1_CH2_1     |                  |
-|            |                  |                  |   TIM8_CH3_1     |                  |                  |                  |   TIM1_CH3_1     |                  |
-| Channel 1  | -                | DCMI_1           | ADC2_1           | ADC2_2           | SAI1_B           | SPI6_TX          | SPI6_RX          | DCMI_2           |
-| Channel 2  | ADC3_1           | ADC3_2           | -                | SPI5_RX_1        | SPI5_TX_1        | CRYP_OUT         | CRYP_IN          | HASH_IN          |
-| Channel 3  | SPI1_RX_1        | -                | SPI1_RX_2        | SPI1_TX_1        | -                | SPI1_TX_2        | -                | QUADSPI          |
-| Channel 4  | SPI4_RX_1        | SPI4_TX_1        | USART1_RX_1      | SDIO             | -                | USART1_RX_2      | SDIO             | USART1_TX        |
-| Channel 5  | -                | USART6_RX_1      | USART6_RX_2      | SPI4_RX_2        | SPI4_TX_2        | -                | USART6_TX_1      | USART6_TX_2      |
-| Channel 6  | TIM1_TRIG_1      | TIM1_CH1_2       | TIM1_CH2_2       | TIM1_CH1         | TIM1_CH4         | TIM1_UP          | TIM1_CH3_2       | -                |
-|            |                  |                  |                  |                  |   TIM1_TRIG_2    |                  |                  |                  |
-|            |                  |                  |                  |                  |   TIM1_COM       |                  |                  |                  |
-| Channel 7  | -                | TIM8_UP          | TIM8_CH1_2       | TIM8_CH2_2       | TIM8_CH3_2       | SPI5_RX_2        | SPI5_TX_2        | TIM8_CH4         |
-|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_TRIG      |
-|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_COM       |
-|            |                  |                  |                  |                  |                  |                  |                  |                  |
-| Usage      | SPI4_RX_1        | USART6_RX_1      | USART1_RX_1      |                  | SPI4_TX_2        |                  | SDIO             |                  |
+| Channel 0  | ADC1_1           | SAI1_A           | TIM8_CH1_1       | SAI1_A_1         | ADC1_2           | SAI1_B_1
+| TIM1_CH1_1       | -                | |            |                  |                  |   TIM8_CH2_1     | | | |
+TIM1_CH2_1     |                  | |            |                  |                  |   TIM8_CH3_1     | | | |
+TIM1_CH3_1     |                  | | Channel 1  | -                | DCMI_1           | ADC2_1           | ADC2_2 |
+SAI1_B           | SPI6_TX          | SPI6_RX          | DCMI_2           | | Channel 2  | ADC3_1           | ADC3_2 | -
+| SPI5_RX_1        | SPI5_TX_1        | CRYP_OUT         | CRYP_IN          | HASH_IN          | | Channel 3  |
+SPI1_RX_1        | -                | SPI1_RX_2        | SPI1_TX_1        | -                | SPI1_TX_2        | - |
+QUADSPI          | | Channel 4  | SPI4_RX_1        | SPI4_TX_1        | USART1_RX_1      | SDIO             | - |
+USART1_RX_2      | SDIO             | USART1_TX        | | Channel 5  | -                | USART6_RX_1      |
+USART6_RX_2      | SPI4_RX_2        | SPI4_TX_2        | -                | USART6_TX_1      | USART6_TX_2      | |
+Channel 6  | TIM1_TRIG_1      | TIM1_CH1_2       | TIM1_CH2_2       | TIM1_CH1         | TIM1_CH4         | TIM1_UP |
+TIM1_CH3_2       | -                | |            |                  |                  |                  | |
+TIM1_TRIG_2    |                  |                  |                  | |            |                  | | | |
+TIM1_COM       |                  |                  |                  | | Channel 7  | -                | TIM8_UP |
+TIM8_CH1_2       | TIM8_CH2_2       | TIM8_CH3_2       | SPI5_RX_2        | SPI5_TX_2        | TIM8_CH4         | | | |
+|                  |                  |                  |                  |                  |   TIM8_TRIG      | | |
+|                  |                  |                  |                  |                  |                  |
+TIM8_COM       | |            |                  |                  |                  |                  | | | | | |
+Usage      | SPI4_RX_1        | USART6_RX_1      | USART1_RX_1      |                  | SPI4_TX_2        | | SDIO | |
  */
 
 // DMA1 Channel/Stream Selections
 //--------------------------------------------//---------------------------//----------------
 
-
 //  DMA2 Channel/Stream Selections
 //--------------------------------------------//---------------------------//----------------
-#define DMACHAN_SPI4_RX    DMAMAP_SPI4_RX_1   // DMA2, Stream 0, Channel 4    (SPI sensors RX)
-#define DMAMAP_USART6_RX   DMAMAP_USART6_RX_1 // DMA2, Stream 1, Channel 4
-#define DMAMAP_USART1_RX   DMAMAP_USART1_RX_1 // DMA2, Stream 2, Channel 4
+#define DMACHAN_SPI4_RX DMAMAP_SPI4_RX_1     // DMA2, Stream 0, Channel 4    (SPI sensors RX)
+#define DMAMAP_USART6_RX DMAMAP_USART6_RX_1  // DMA2, Stream 1, Channel 4
+#define DMAMAP_USART1_RX DMAMAP_USART1_RX_1  // DMA2, Stream 2, Channel 4
 //      AVAILABLE                             // DMA2, Stream 3
-#define DMACHAN_SPI4_TX    DMAMAP_SPI4_TX_2   // DMA2, Stream 4, Channel 5    (SPI sensors TX)
+#define DMACHAN_SPI4_TX DMAMAP_SPI4_TX_2  // DMA2, Stream 4, Channel 5    (SPI sensors TX)
 //      AVAILABLE                             // DMA2, Stream 5, Channel 6
-#define DMAMAP_SDIO        DMAMAP_SDIO_2      // DMA2, Stream 6, Channel 4
+#define DMAMAP_SDIO DMAMAP_SDIO_2  // DMA2, Stream 6, Channel 4

boards/airmind/mindpx-v2/nuttx-config/nsh/defconfig

@@ -111,7 +111,6 @@ CONFIG_NSH_VARS=y
 CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
-CONFIG_DISABLE_PTHREAD=n
 CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_RAMTRON_SETSPEED=y
@@ -125,15 +124,13 @@ CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
-CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y
-CONFIG_SEM_NNESTPRIO=8
-CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -176,7 +173,7 @@ CONFIG_STM32_SPI1=y
 CONFIG_STM32_SPI2=y
 CONFIG_STM32_SPI4=y
 CONFIG_STM32_SPI4_DMA=y
-CONFIG_STM32_SPI4_DMA_BUFFER=1024
+CONFIG_STM32_SPI4_DMA_BUFFER=512
 CONFIG_STM32_SPI_DMA=y
 CONFIG_STM32_SPI_DMATHRESHOLD=8
 CONFIG_STM32_TIM10=y
@@ -229,5 +226,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_INIT_STACKSIZE=2944
-CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"

boards/airmind/mindpx-v2/src/board_config.h

@@ -43,8 +43,8 @@
  * Included Files
  ****************************************************************************************************/
 
-#include <px4_platform_common/px4_config.h>
 #include <nuttx/compiler.h>
+#include <px4_platform_common/px4_config.h>
 #include <stdint.h>
 
 /****************************************************************************************************
@@ -52,75 +52,77 @@
  ****************************************************************************************************/
 /* Configuration ************************************************************************************/
 
-
 /* PX4FMU GPIOs ***********************************************************************************/
 /* LEDs */
-#define GPIO_LED1		(GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)
-#define BOARD_OVERLOAD_LED     LED_RED
+#define GPIO_LED1 (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_CLEAR | GPIO_PORTA | GPIO_PIN8)
+#define BOARD_OVERLOAD_LED LED_RED
 
 /*
  * ADC channels
  *
- * These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc driver
+ * These are the channel numbers of the ADCs of the microcontroller that can be used by the Px4 Firmware in the adc
+ * driver
  */
 #define ADC_CHANNELS (1 << 4) | (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13) | (1 << 14) | (1 << 15)
 
 // ADC defines to be used in sensors.cpp to read from a particular channel
-#define ADC_5V_RAIL_SENSE		4
-#define ADC_BATTERY_CURRENT_CHANNEL	10
-#define ADC_BATTERY_VOLTAGE_CHANNEL	12
-#define ADC_RC_RSSI_CHANNEL		11
-#define ADC_AIRSPEED_VOLTAGE_CHANNEL	15
+#define ADC_5V_RAIL_SENSE 4
+#define ADC_BATTERY_CURRENT_CHANNEL 10
+#define ADC_BATTERY_VOLTAGE_CHANNEL 12
+#define ADC_RC_RSSI_CHANNEL 11
+#define ADC_AIRSPEED_VOLTAGE_CHANNEL 15
 
 /* Power supply control and monitoring GPIOs */
-// #define GPIO_VDD_5V_PERIPH_EN	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)
-// #define GPIO_VDD_BRICK_VALID	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)
-// #define GPIO_VDD_SERVO_VALID	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN7)
-// #define GPIO_VDD_3V3_SENSORS_EN	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
-// #define GPIO_VDD_5V_HIPOWER_OC	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN10)
-// #define GPIO_VDD_5V_PERIPH_OC	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)
+// #define GPIO_VDD_5V_PERIPH_EN
+// (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8) #define GPIO_VDD_BRICK_VALID
+// (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5) #define GPIO_VDD_SERVO_VALID
+// (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN7) #define GPIO_VDD_3V3_SENSORS_EN
+// (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3) #define GPIO_VDD_5V_HIPOWER_OC
+// (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN10) #define GPIO_VDD_5V_PERIPH_OC
+// (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN15)
 
 /* Tone alarm output */
-#define TONE_ALARM_TIMER	14	/* timer 14 */
-#define TONE_ALARM_CHANNEL	1	/* channel 1 */
-#define GPIO_TONE_ALARM_IDLE	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN7)
-#define GPIO_TONE_ALARM		(GPIO_ALT|GPIO_AF9|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN7)
+#define TONE_ALARM_TIMER 14  /* timer 14 */
+#define TONE_ALARM_CHANNEL 1 /* channel 1 */
+#define GPIO_TONE_ALARM_IDLE \
+	(GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | GPIO_OUTPUT_CLEAR | GPIO_PORTA | GPIO_PIN7)
+#define GPIO_TONE_ALARM (GPIO_ALT | GPIO_AF9 | GPIO_SPEED_2MHz | GPIO_PUSHPULL | GPIO_PORTA | GPIO_PIN7)
 
 /* AUX PWMs
  */
-#define DIRECT_PWM_OUTPUT_CHANNELS	8
+#define DIRECT_PWM_OUTPUT_CHANNELS 8
 
 /* USB OTG FS
  *
  * PA9  OTG_FS_VBUS VBUS sensing
  */
-#define GPIO_OTGFS_VBUS		(GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
-
-
+#define GPIO_OTGFS_VBUS (GPIO_INPUT | GPIO_FLOAT | GPIO_SPEED_100MHz | GPIO_OPENDRAIN | GPIO_PORTA | GPIO_PIN9)
 
 /* High-resolution timer */
-#define HRT_TIMER		8	/* use timer8 for the HRT */
-#define HRT_TIMER_CHANNEL	2	/* use capture/compare channel */
+#define HRT_TIMER 8         /* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL 2 /* use capture/compare channel */
 
-#define HRT_PPM_CHANNEL		1
-#define GPIO_PPM_IN		GPIO_TIM8_CH1IN_1
+#define HRT_PPM_CHANNEL 1
+#define GPIO_PPM_IN GPIO_TIM8_CH1IN_1
 
 /* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 1 */
-#define PWMIN_TIMER		4
-#define PWMIN_TIMER_CHANNEL	1
-#define GPIO_PWM_IN		GPIO_TIM1_CH1IN_2
+#define PWMIN_TIMER 4
+#define PWMIN_TIMER_CHANNEL 1
+#define GPIO_PWM_IN GPIO_TIM1_CH1IN_2
 
-#define RC_SERIAL_PORT		"/dev/ttyS0"
+#define RC_SERIAL_PORT "/dev/ttyS0"
 
 // #define GPIO_RSSI_IN                (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN1)
-#define GPIO_SBUS_INV                  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN10)
-#define RC_INVERT_INPUT(_invert_true)  px4_arch_gpiowrite(GPIO_SBUS_INV, _invert_true);
+#define GPIO_SBUS_INV (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTA | GPIO_PIN10)
+#define RC_INVERT_INPUT(_invert_true) px4_arch_gpiowrite(GPIO_SBUS_INV, _invert_true);
 
-#define GPIO_FRSKY_INV                (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN12)
-#define INVERT_FRSKY(_invert_true)    px4_arch_gpiowrite(GPIO_FRSKY_INV, _invert_true);
+#define GPIO_FRSKY_INV (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN12)
+#define INVERT_FRSKY(_invert_true) px4_arch_gpiowrite(GPIO_FRSKY_INV, _invert_true);
 
 /* Power switch controls */
-#define SPEKTRUM_POWER(_on_true)      do { } while (0)
+#define SPEKTRUM_POWER(_on_true) \
+	do {                     \
+	} while (0)
 
 /*
  * MindPXv2 has one RC_IN
@@ -131,22 +133,21 @@
  * The FMU can drive GPIO PPM_IN as an output
  */
 
-#define GPIO_PPM_IN_AS_OUT            (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN6)
-#define SPEKTRUM_RX_AS_GPIO_OUTPUT()  px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
-#define SPEKTRUM_RX_AS_UART()         px4_arch_configgpio(GPIO_USART1_RX)
-#define SPEKTRUM_OUT(_one_true)       px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
+#define GPIO_PPM_IN_AS_OUT (GPIO_OUTPUT | GPIO_PUSHPULL | GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTC | GPIO_PIN6)
+#define SPEKTRUM_RX_AS_GPIO_OUTPUT() px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
+#define SPEKTRUM_RX_AS_UART() px4_arch_configgpio(GPIO_USART1_RX)
+#define SPEKTRUM_OUT(_one_true) px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
 
 /* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
  * this board support the ADC system_power interface, and therefore
  * provides the true logic GPIO BOARD_ADC_xxxx macros.
  */
 #define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
-#define BOARD_ADC_BRICK_VALID   (1)
-#define BOARD_ADC_SERVO_VALID   (1)
-#define BOARD_ADC_PERIPH_5V_OC  (0)
+#define BOARD_ADC_BRICK_VALID (1)
+#define BOARD_ADC_SERVO_VALID (1)
+#define BOARD_ADC_PERIPH_5V_OC (0)
 #define BOARD_ADC_HIPOWER_5V_OC (0)
 
-
 /* This board provides a DMA pool and APIs */
 #define BOARD_DMA_ALLOC_POOL_SIZE 5120
 
@@ -182,10 +183,8 @@ extern void stm32_spiinitialize(void);
 
 extern void stm32_usbinitialize(void);
 
-
 #define board_peripheral_reset(ms)
 
-
 #include <px4_platform_common/board_common.h>
 
 #endif /* __ASSEMBLY__ */

boards/airmind/mindpx-v2/src/can.c

@@ -41,20 +41,17 @@
  * Included Files
  ************************************************************************************/
 
+#include <arch/board/board.h>
+#include <debug.h>
+#include <errno.h>
+#include <nuttx/can/can.h>
 #include <px4_platform_common/px4_config.h>
 
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
+#include "arm_arch.h"
+#include "board_config.h"
 #include "chip.h"
-#include "arm_internal.h"
-
 #include "stm32.h"
 #include "stm32_can.h"
-#include "board_config.h"
 
 #ifdef CONFIG_CAN
 
@@ -64,14 +61,14 @@
 /* Configuration ********************************************************************/
 
 #if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
+#warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#undef CONFIG_STM32_CAN2
 #endif
 
 #ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
+#define CAN_PORT 1
 #else
-#  define CAN_PORT 2
+#define CAN_PORT 2
 #endif
 
 /************************************************************************************
@@ -91,8 +88,7 @@ int can_devinit(void);
  *
  ************************************************************************************/
 
-int can_devinit(void)
-{
+int can_devinit(void) {
 	static bool initialized = false;
 	struct can_dev_s *can;
 	int ret;

boards/airmind/mindpx-v2/src/i2c.cpp

@@ -37,4 +37,3 @@ constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
 	initI2CBusInternal(1),
 	initI2CBusExternal(2),
 };
-