WIP: afbrs50 try SPI_LOCK

Specify orientaiton of ADIS16448 IMU for from the rc.sensors

WIP: Currently only handling one orientation

.ci/Jenkinsfile-compile

@@ -9,10 +9,10 @@ pipeline {
         script {
           def build_nodes = [:]
           def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2021-02-04",
-            arm64: "px4io/px4-dev-aarch64:2021-02-04",
-            base: "px4io/px4-dev-base-bionic:2021-02-04",
-            nuttx: "px4io/px4-dev-nuttx-focal:2021-02-04",
+            armhf: "px4io/px4-dev-armhf:2021-04-29",
+            arm64: "px4io/px4-dev-aarch64:2021-04-29",
+            base: "px4io/px4-dev-base-bionic:2021-04-29",
+            nuttx: "px4io/px4-dev-nuttx-focal:2021-04-29",
             snapdragon: "lorenzmeier/px4-dev-snapdragon:2020-04-01"
           ]
 
@@ -46,16 +46,18 @@ pipeline {
                      "cuav_can-gps-v1_default",
                      "cuav_nora_default",
                      "cuav_x7pro_default",
-                     "cubepilot_cubeorange_console",
                      "cubepilot_cubeorange_default",
-                     "cubepilot_cubeyellow_console",
                      "cubepilot_cubeyellow_default",
+                     "freefly_can-rtk-gps_canbootloader",
+                     "freefly_can-rtk-gps_default",
                      "holybro_can-gps-v1_canbootloader",
                      "holybro_can-gps-v1_default",
                      "holybro_durandal-v1_default",
                      "holybro_kakutef7_default",
                      "holybro_pix32v5_default",
                      "modalai_fc-v1_default",
+                     "modalai_fc-v1_rtps",
+                     "modalai_fc-v2_default",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
                      "mro_ctrl-zero-h7_default",
@@ -77,7 +79,6 @@ pipeline {
                      "px4_fmu-v2_fixedwing",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
-                     "px4_fmu-v2_test",
                      "px4_fmu-v3_default",
                      "px4_fmu-v4_cannode",
                      "px4_fmu-v4_default",
@@ -96,7 +97,6 @@ pipeline {
                      "px4_fmu-v5x_base_phy_DP83848C",
                      "px4_fmu-v5x_default",
                      "px4_fmu-v6u_default",
-                     "px4_fmu-v6u_test",
                      "px4_fmu-v6x_default",
                      "px4_io-v2_default",
                      "spracing_h7extreme_default",
@@ -133,7 +133,7 @@ pipeline {
     // TODO: actually upload artifacts to S3
     // stage('S3 Upload') {
     //   agent {
-    //     docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+    //     docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
     //   }
     //   options {
     //         skipDefaultCheckout()
@@ -158,7 +158,7 @@ pipeline {
   }
   options {
     buildDiscarder(logRotator(numToKeepStr: '5', artifactDaysToKeepStr: '14'))
-    timeout(time: 60, unit: 'MINUTES')
+    timeout(time: 90, unit: 'MINUTES')
   }
 }
 

.ci/Jenkinsfile-hardware

@@ -7,12 +7,12 @@ pipeline {
 
       parallel {
 
-        stage("cubepilot_cubeorange_console") {
+        stage("cubepilot_cubeorange_test") {
           stages {
-            stage("build cubepilot_cubeorange_console") {
+            stage("build cubepilot_cubeorange_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -22,10 +22,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make cubepilot_cubeorange_console'
+                sh 'make cubepilot_cubeorange_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_console'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
               }
               post {
                 always {
@@ -42,9 +42,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'cubepilot_cubeorange_console'
+                    unstash 'cubepilot_cubeorange_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_console/cubepilot_cubeorange_console.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -52,12 +52,12 @@ pipeline {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/cubepilot_io-v2_default.bin" || true' // force px4io update
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -73,23 +73,20 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
 
-        stage("cuav_x7pro_default") {
+        stage("cuav_x7pro_test") {
           stages {
-            stage("build cuav_x7pro_default") {
+            stage("build cuav_x7pro_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -99,10 +96,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make cuav_x7pro_default'
+                sh 'make cuav_x7pro_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_test'
               }
               post {
                 always {
@@ -119,21 +116,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'cuav_x7pro_default'
+                    unstash 'cuav_x7pro_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_default/cuav_x7pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -149,75 +146,20 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
 
-        // stage("px4_fmu-v2_test") {
-        //   stages {
-        //     stage("build px4_fmu-v2_test") {
-        //       agent {
-        //         docker {
-        //           image 'px4io/px4-dev-nuttx-focal:2020-09-14'
-        //           args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-        //         }
-        //       }
-        //       steps {
-        //         sh 'export'
-        //         sh 'make distclean'
-        //         sh 'ccache -s'
-        //         sh 'git fetch --tags'
-        //         sh 'make px4_fmu-v2_test'
-        //         sh 'make sizes'
-        //         sh 'ccache -s'
-        //         stash includes: 'build/px4_fmu-v2_test/px4_fmu-v2_test.elf', name: 'px4_fmu-v2_test'
-        //       }
-        //       post {
-        //         always {
-        //             sh 'make distclean'
-        //         }
-        //       }
-        //     } // stage build
-        //     stage("test") {
-        //       agent {
-        //         label 'px4_fmu-v2'
-        //       }
-        //       stages {
-        //         stage("flash") {
-        //           steps {
-        //             sh 'export'
-        //             sh 'find /dev/serial'
-        //             unstash 'px4_fmu-v2_test'
-        //             // flash board and watch bootup
-        //             sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v2_test/px4_fmu-v2_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-        //           }
-        //         }
-        //         stage("reset") {
-        //           steps {
-        //             cleanupFTDI();
-        //           }
-        //         }
-        //       }
-        //       options {
-        //         timeout(time: 90, unit: 'MINUTES')
-        //       }
-        //     }
-        //   }
-        // }
-
-        stage("px4_fmu-v3_default") {
+        stage("px4_fmu-v3_test") {
           stages {
-            stage("build px4_fmu-v3_default") {
+            stage("build px4_fmu-v3_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -227,10 +169,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v3_default'
+                sh 'make px4_fmu-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
               }
               post {
                 always {
@@ -247,21 +189,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v3_default'
+                    unstash 'px4_fmu-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -277,23 +219,20 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
 
-        stage("px4_fmu-v4_default") {
+        stage("px4_fmu-v4_test") {
           stages {
-            stage("build px4_fmu-v4_default") {
+            stage("build px4_fmu-v4_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -303,10 +242,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4_default'
+                sh 'make px4_fmu-v4_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
               }
               post {
                 always {
@@ -323,20 +262,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4_default'
+                    unstash 'px4_fmu-v4_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_default/px4_fmu-v4_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -352,23 +292,20 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
 
-        stage("px4_fmu-v4pro_default") {
+        stage("px4_fmu-v4pro_test") {
           stages {
-            stage("build px4_fmu-v4pro_default") {
+            stage("build px4_fmu-v4pro_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -378,10 +315,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4pro_default'
+                sh 'make px4_fmu-v4pro_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
               }
               post {
                 always {
@@ -398,21 +335,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4pro_default'
+                    unstash 'px4_fmu-v4pro_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_default/px4_fmu-v4pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -428,23 +365,20 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
 
-        stage("px4_fmu-v5_default") {
+        stage("px4_fmu-v5_test") {
           stages {
-            stage("build px4_fmu-v5_default") {
+            stage("build px4_fmu-v5_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -454,10 +388,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v5_default'
+                sh 'make px4_fmu-v5_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
               }
               post {
                 always {
@@ -474,21 +408,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_default'
+                    unstash 'px4_fmu-v5_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -504,13 +438,10 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
@@ -520,7 +451,7 @@ pipeline {
             stage("build px4_fmu-v5_debug") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -561,13 +492,14 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'   // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -583,13 +515,10 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
@@ -599,7 +528,7 @@ pipeline {
             stage("build px4_fmu-v5_optimized") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -637,12 +566,13 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -658,13 +588,10 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
@@ -674,7 +601,7 @@ pipeline {
             stage("build px4_fmu-v5_stackcheck") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -715,88 +642,14 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'   // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'        // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
-                  }
-                }
-                stage("status") {
-                  steps {
-                    statusFTDI()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    // run tests
-                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
-                  }
-                }
-                stage("reset") {
-                  steps {
-                    cleanupFTDI();
-                  }
-                }
-              }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
-            } // stage test
-          }
-        }
-
-        stage("modalai_fc-v1_default") {
-          stages {
-            stage("build modalai_fc-v1_default") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
-                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkout scm
-                sh 'export'
-                sh 'make distclean'
-                sh 'ccache -s'
-                sh 'git fetch --tags'
-                sh 'make modalai_fc-v1_default'
-                sh 'make sizes'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_default'
-              }
-              post {
-                always {
-                    sh 'make distclean'
-                }
-              }
-            } // stage build
-            stage("test") {
-              agent {
-                label 'modalai_fc-v1'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'modalai_fc-v1_default'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_default/modalai_fc-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                  }
-                }
-                stage("configure") {
-                  steps {
-                    // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic vtol standardulticopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -816,19 +669,16 @@ pipeline {
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
 
-        stage("holybro_durandal-v1_default") {
+        stage("modalai_fc-v1_test") {
           stages {
-            stage("build holybro_durandal-v1_default") {
+            stage("build modalai_fc-v1_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -838,10 +688,83 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make holybro_durandal-v1_default'
+                sh 'make modalai_fc-v1_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'holybro_durandal-v1_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_test'
+              }
+              post {
+                always {
+                    sh 'make distclean'
+                }
+              }
+            } // stage build
+            stage("test") {
+              agent {
+                label 'modalai_fc-v1'
+              }
+              stages {
+                stage("flash") {
+                  steps {
+                    sh 'export'
+                    sh 'find /dev/serial'
+                    unstash 'modalai_fc-v1_test'
+                    // flash board and watch bootup
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_test/modalai_fc-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                  }
+                }
+                stage("configure") {
+                  steps {
+                    // configure
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
+                  }
+                }
+                stage("status") {
+                  steps {
+                    statusFTDI()
+                  }
+                }
+                stage("tests") {
+                  steps {
+                    // run tests
+                    sh './Tools/HIL/run_tests.py --device `find /dev/serial -name *usb-*`'
+                  }
+                }
+                stage("reset") {
+                  steps {
+                    cleanupFTDI()
+                  }
+                }
+              }
+            } // stage test
+          }
+        }
+
+        stage("holybro_durandal-v1_test") {
+          stages {
+            stage("build holybro_durandal-v1_test") {
+              agent {
+                docker {
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
+                  args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
+                }
+              }
+              steps {
+                checkout scm
+                sh 'export'
+                sh 'make distclean'
+                sh 'ccache -s'
+                sh 'git fetch --tags'
+                sh 'make holybro_durandal-v1_test'
+                sh 'make sizes'
+                sh 'ccache -s'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'holybro_durandal-v1_test'
               }
               post {
                 always {
@@ -858,24 +781,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'holybro_durandal-v1_default'
+                    unstash 'holybro_durandal-v1_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_default/holybro_durandal-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_test/holybro_durandal-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set DSHOT_CONFIG 600"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 4000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_USE_IO 0"'          // for dshot
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -892,23 +812,20 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
 
-        stage("nxp_fmuk66-v3_default") {
+        stage("nxp_fmuk66-v3_test") {
           stages {
-            stage("build nxp_fmuk66-v3_default") {
+            stage("build nxp_fmuk66-v3_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -918,10 +835,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make nxp_fmuk66-v3_default'
+                sh 'make nxp_fmuk66-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
               }
               post {
                 always {
@@ -938,20 +855,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'nxp_fmuk66-v3_default'
+                    unstash 'nxp_fmuk66-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_default/nxp_fmuk66-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -967,13 +885,10 @@ pipeline {
                 }
                 stage("reset") {
                   steps {
-                    cleanupFTDI();
+                    cleanupFTDI()
                   }
                 }
               }
-              options {
-                timeout(time: 90, unit: 'MINUTES')
-              }
             } // stage test
           }
         }
@@ -986,8 +901,8 @@ pipeline {
     CI = true
   }
   options {
-    buildDiscarder(logRotator(numToKeepStr: '20', artifactDaysToKeepStr: '40'))
-    timeout(time: 90, unit: 'MINUTES')
+    buildDiscarder(logRotator(numToKeepStr: '30', artifactDaysToKeepStr: '60'))
+    timeout(time: 120, unit: 'MINUTES')
     skipDefaultCheckout()
   }
 }
@@ -1027,6 +942,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gps"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag"'
@@ -1038,6 +954,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_gps_position"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position"'

.devcontainer/devcontainer.json

@@ -2,7 +2,7 @@
 // https://github.com/microsoft/vscode-dev-containers/tree/v0.134.0/containers/cpp
 {
 	"name": "px4-dev-nuttx",
-	"image": "px4io/px4-dev-nuttx-focal:2021-02-04",
+	"image": "px4io/px4-dev-nuttx-focal:2021-04-29",
 
 	"runArgs": [ "--cap-add=SYS_PTRACE", "--security-opt", "seccomp=unconfined" ],
 

.github/workflows/checks.yml

@@ -23,12 +23,13 @@ jobs:
           "shellcheck_all",
           "NO_NINJA_BUILD=1 px4_fmu-v5_default",
           "NO_NINJA_BUILD=1 px4_sitl_default",
+          "BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
           "airframe_metadata",
           "module_documentation",
           "parameters_metadata",
         ]
     container:
-      image: px4io/px4-dev-nuttx-focal:2021-02-04
+      image: px4io/px4-dev-nuttx-focal:2021-04-29
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1

.github/workflows/clang-tidy.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-clang:2021-02-04
+    container: px4io/px4-dev-clang:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:

.github/workflows/compile_linux.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-armhf:2021-02-04
+    container: px4io/px4-dev-armhf:2021-04-29
     strategy:
       matrix:
         config: [

.github/workflows/compile_linux_arm64.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-aarch64:2021-02-04
+    container: px4io/px4-dev-aarch64:2021-04-29
     strategy:
       matrix:
         config: [

.github/workflows/compile_nuttx.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-02-04
+    container: px4io/px4-dev-nuttx-focal:2021-04-29
     strategy:
       matrix:
         config: [
@@ -19,6 +19,9 @@ jobs:
           ark_can-flow_canbootloader,
           ark_can-flow_debug,
           ark_can-flow_default,
+          ark_can-gps_canbootloader,
+          ark_can-gps_debug,
+          ark_can-gps_default,
           av_x-v1_default,
           bitcraze_crazyflie21_default,
           bitcraze_crazyflie_default,
@@ -27,11 +30,13 @@ jobs:
           cuav_can-gps-v1_default,
           cuav_nora_default,
           cuav_x7pro_default,
-          cubepilot_cubeorange_console,
           cubepilot_cubeorange_default,
-          cubepilot_cubeyellow_console,
+          cubepilot_cubeorange_test,
           cubepilot_cubeyellow_default,
+          cubepilot_cubeyellow_test,
           cubepilot_io-v2_default,
+          freefly_can-rtk-gps_canbootloader,
+          freefly_can-rtk-gps_default,
           holybro_can-gps-v1_canbootloader,
           holybro_can-gps-v1_debug,
           holybro_can-gps-v1_default,
@@ -39,6 +44,8 @@ jobs:
           holybro_kakutef7_default,
           holybro_pix32v5_default,
           modalai_fc-v1_default,
+          modalai_fc-v1_rtps,
+          modalai_fc-v2_default,
           mro_ctrl-zero-f7-oem_default,
           mro_ctrl-zero-f7_default,
           mro_ctrl-zero-h7-oem_default,
@@ -60,7 +67,6 @@ jobs:
           px4_fmu-v2_fixedwing,
           px4_fmu-v2_multicopter,
           px4_fmu-v2_rover,
-          px4_fmu-v2_test,
           px4_fmu-v3_default,
           px4_fmu-v4_cannode,
           px4_fmu-v4_default,
@@ -79,7 +85,6 @@ jobs:
           px4_fmu-v5x_base_phy_DP83848C,
           px4_fmu-v5x_default,
           px4_fmu-v6u_default,
-          px4_fmu-v6u_test,
           px4_fmu-v6x_default,
           px4_io-v2_default,
           spracing_h7extreme_default,
@@ -124,6 +129,8 @@ jobs:
       run: make ${{matrix.config}} bloaty_symbols || true
     - name: make ${{matrix.config}} bloaty_templates
       run: make ${{matrix.config}} bloaty_templates || true
+    - name: make ${{matrix.config}} bloaty_ram
+      run: make ${{matrix.config}} bloaty_ram || true
     - name: make ${{matrix.config}} bloaty_compare_master
       run: make ${{matrix.config}} bloaty_compare_master || true
     - name: ccache post-run

.github/workflows/compile_nuttx_cannode.yml

@@ -11,12 +11,13 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-02-04
+    container: px4io/px4-dev-nuttx-focal:2021-04-29
     strategy:
       matrix:
         config: [
           ark_can-flow_default,
           cuav_can-gps-v1_default,
+          freefly_can-rtk-gps_default,
           holybro_can-gps-v1_default,
           #nxp_ucans32k146_default,
           px4_fmu-v4_cannode

.github/workflows/deploy_all.yml

@@ -23,7 +23,7 @@ jobs:
     needs: enumerate_targets
     strategy:
       matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
-    container: px4io/px4-dev-${{ matrix.container }}:2021-02-04
+    container: px4io/px4-dev-${{ matrix.container }}:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:

.github/workflows/mavros_avoidance_tests.yml

@@ -1,131 +0,0 @@
-name: MAVROS Avoidance Tests
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {test_file: "mavros_posix_test_avoidance.test",    vehicle: "iris_obs_avoid", mission: "avoidance",       build_type: "RelWithDebInfo"}
-          - {test_file: "mavros_posix_test_safe_landing.test", vehicle: "iris_obs_avoid", mission: "MC_safe_landing", build_type: "RelWithDebInfo"}
-
-    container:
-      image: px4io/px4-dev-ros-melodic:2021-02-04
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_avoidance_run.sh ${{matrix.config.test_file}} mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}} || true
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v2-preview
-      with:
-        name: coredump
-        path: px4.core
-
-    # - name: ecl EKF analysis
-    #   if: always()
-    #   run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_avoidance
-        file: coverage/lcov.info

.github/workflows/mavros_mission_tests.yml

@@ -25,7 +25,7 @@ jobs:
           #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
 
     container:
-      image: px4io/px4-dev-ros-melodic:2021-02-04
+      image: px4io/px4-dev-ros-melodic:2021-04-29
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1

.github/workflows/mavros_offboard_tests.yml

@@ -20,7 +20,7 @@ jobs:
           #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
 
     container:
-      image: px4io/px4-dev-ros-melodic:2021-02-04
+      image: px4io/px4-dev-ros-melodic:2021-04-29
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1

.github/workflows/metadata.yml

@@ -11,7 +11,7 @@ jobs:
 
   airframe:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: px4io/px4-dev-base-focal:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:
@@ -26,7 +26,7 @@ jobs:
 
   module:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: px4io/px4-dev-base-focal:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:
@@ -41,7 +41,7 @@ jobs:
 
   parameter:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: px4io/px4-dev-base-focal:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:
@@ -65,7 +65,7 @@ jobs:
 
   uorb_graph:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-02-04
+    container: px4io/px4-dev-nuttx-focal:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:
@@ -80,7 +80,7 @@ jobs:
 
   micrortps_agent:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: px4io/px4-dev-base-focal:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:
@@ -94,7 +94,7 @@ jobs:
 
   ROS_msgs:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: px4io/px4-dev-base-focal:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:
@@ -107,7 +107,7 @@ jobs:
 
   ROS2_bridge:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: px4io/px4-dev-base-focal:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:

.github/workflows/python_checks.yml

@@ -18,7 +18,7 @@ jobs:
     - name: Install Python3
       run: sudo apt-get install python3 python3-setuptools python3-pip -y
     - name: Install tools
-      run: pip3 install --user mypy flake8
+      run: pip3 install --user mypy types-requests flake8
     - name: Check MAVSDK test scripts with mypy
       run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
     - name: Check MAVSDK test scripts with flake8

.github/workflows/sitl_tests.yml

@@ -15,12 +15,13 @@ jobs:
       fail-fast: false
       matrix:
         config:
-          - {latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo", model: "iris"          } # Alaska
-          - {latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "RelWithDebInfo", model: "standard_vtol" } # Australia
-          - {latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo", model: "tailsitter"    } # Florida
-          - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",       model: "standard_vtol" } # Zurich
+          - {latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo",   model: "iris"          } # Alaska
+          - {latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer", model: "standard_vtol" } # Australia
+          - {latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo",   model: "tailsitter"    } # Florida
+          - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",         model: "standard_vtol" } # Zurich
+
     container:
-      image: px4io/px4-dev-simulation-focal:2021-02-04
+      image: px4io/px4-dev-simulation-focal:2021-04-29
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1
@@ -28,9 +29,9 @@ jobs:
         token: ${{ secrets.ACCESS_TOKEN }}
 
     - name: Download MAVSDK
-      run: wget https://github.com/mavlink/MAVSDK/releases/download/v0.36.0/mavsdk_0.36.0_ubuntu20.04_amd64.deb
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
     - name: Install MAVSDK
-      run: dpkg -i mavsdk_0.36.0_ubuntu20.04_amd64.deb
+      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp

.gitignore

@@ -108,3 +108,5 @@ src/systemcmds/topic_listener/listener_generated.cpp
 # SITL
 dataman
 eeprom/
+
+!src/drivers/distance_sensor/broadcom/afbrs50/Lib/*

.gitmodules

@@ -33,7 +33,7 @@
 [submodule "src/modules/micrortps_bridge/micro-CDR"]
 	path = src/modules/micrortps_bridge/micro-CDR
 	url = https://github.com/PX4/Micro-CDR.git
-	branch = px4
+	branch = master
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
@@ -59,7 +59,14 @@
 	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/public_regulated_data_types"]
 	path = src/drivers/uavcannode_gps_demo/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/libcanard"]
 	path = src/drivers/uavcannode_gps_demo/libcanard
-	url = https://github.com/UAVCAN/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
+	url = https://github.com/PX4/public_regulated_data_types.git
+	branch = legacy
+[submodule "src/lib/crypto/monocypher"]
+	path = src/lib/crypto/monocypher
+	url = https://github.com/PX4/Monocypher.git

.vscode/cmake-variants.yaml

@@ -66,6 +66,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-flow_canbootloader
+    ark_can-gps_default:
+      short: ark_can-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-gps_default
+    ark_can-gps_canbootloader:
+      short: ark_can-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-gps_canbootloader
     av_x-v1_default:
       short: av_x-v1
       buildType: MinSizeRel
@@ -96,21 +106,26 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_x7pro_default
-    cubepilot_cubeorange_default:
+    cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
       settings:
-        CONFIG: cubepilot_orange_default
-    cubepilot_cubeyellow_default:
-      short: cubepilot_cubeyellow
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cubepilot_cubeyellow_default
+        CONFIG: cubepilot_orange_test
     emlid_navio2_default:
       short: emlid_navio2
       buildType: MinSizeRel
       settings:
         CONFIG: emlid_navio2_default
+    freefly_can-rtk-gps_default:
+      short: freefly_can-rtk-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: freefly_can-rtk-gps_default
+    freefly_can-rtk-gps_canbootloader:
+      short: freefly_can-rtk-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: freefly_can-rtk-gps_canbootloader
     holybro_can-gps-v1_canbootloader:
       short: holybro_can-gps-v1_canbootloader
       buildType: MinSizeRel
@@ -131,6 +146,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: modalai_fc-v1_default
+    modalai_fc-v2_default:
+      short: modalai_fc-v2
+      buildType: MinSizeRel
+      settings:
+        CONFIG: modalai_fc-v2_default
     mro_ctrl-zero-f7_default:
       short: mro_ctrl-zero-f7
       buildType: MinSizeRel

CMakeLists.txt

@@ -185,6 +185,8 @@ if((CMAKE_BUILD_TYPE STREQUAL "Debug") OR (CMAKE_BUILD_TYPE STREQUAL "Coverage")
 	set(MAX_CUSTOM_OPT_LEVEL -O0)
 elseif(CMAKE_BUILD_TYPE MATCHES "Sanitizer")
 	set(MAX_CUSTOM_OPT_LEVEL -O1)
+elseif(CMAKE_BUILD_TYPE MATCHES "Release")
+	set(MAX_CUSTOM_OPT_LEVEL -O3)
 else()
 	if(px4_constrained_flash_build)
 		set(MAX_CUSTOM_OPT_LEVEL -Os)

Jenkinsfile

@@ -15,7 +15,7 @@ pipeline {
         // stage('Catkin build on ROS workspace') {
         //   agent {
         //     docker {
-        //       image 'px4io/px4-dev-ros-melodic:2021-02-04'
+        //       image 'px4io/px4-dev-ros-melodic:2021-04-29'
         //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
         //     }
         //   }
@@ -56,7 +56,7 @@ pipeline {
         stage('Colcon build on ROS2 workspace') {
           agent {
             docker {
-              image 'px4io/px4-dev-ros2-foxy:2021-02-04'
+              image 'px4io/px4-dev-ros2-foxy:2021-04-29'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
             }
           }
@@ -85,10 +85,11 @@ pipeline {
 
         stage('Airframe') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make airframe_metadata'
             dir('build/px4_sitl_default/docs') {
               archiveArtifacts(artifacts: 'airframes.md, airframes.xml')
@@ -104,10 +105,11 @@ pipeline {
 
         stage('Parameter') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make parameters_metadata'
             dir('build/px4_sitl_default/docs') {
               archiveArtifacts(artifacts: 'parameters.md, parameters.xml, parameters.json.xz')
@@ -123,10 +125,11 @@ pipeline {
 
         stage('Module') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make module_documentation'
             dir('build/px4_sitl_default/docs') {
               archiveArtifacts(artifacts: 'modules/*.md')
@@ -143,13 +146,14 @@ pipeline {
         stage('uORB graphs') {
           agent {
             docker {
-              image 'px4io/px4-dev-nuttx-focal:2021-02-04'
+              image 'px4io/px4-dev-nuttx-focal:2021-04-29'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
             }
           }
           steps {
             sh 'export'
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make uorb_graphs'
             dir('Tools/uorb_graph') {
               archiveArtifacts(artifacts: 'graph_px4_sitl.json')
@@ -172,7 +176,7 @@ pipeline {
 
         stage('Userguide') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh('export')
@@ -202,7 +206,7 @@ pipeline {
 
         stage('QGroundControl') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh('export')
@@ -230,7 +234,7 @@ pipeline {
 
         stage('microRTPS agent') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh('export')
@@ -260,7 +264,7 @@ pipeline {
 
         stage('PX4 ROS msgs') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh('export')
@@ -289,7 +293,7 @@ pipeline {
 
         stage('PX4 ROS2 bridge') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh('export')
@@ -332,7 +336,7 @@ pipeline {
 
         stage('S3') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-04-29' }
           }
           steps {
             sh('export')
@@ -370,7 +374,7 @@ pipeline {
     GIT_COMMITTER_NAME = "PX4BuildBot"
   }
   options {
-    buildDiscarder(logRotator(numToKeepStr: '10', artifactDaysToKeepStr: '20'))
-    timeout(time: 60, unit: 'MINUTES')
+    buildDiscarder(logRotator(numToKeepStr: '20', artifactDaysToKeepStr: '30'))
+    timeout(time: 90, unit: 'MINUTES')
   }
 }

Makefile

@@ -63,7 +63,7 @@ all: px4_sitl_default
 space := $(subst ,, )
 
 define make_list
-     $(shell cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
+     $(shell [ -f .github/workflows/compile_${1}.yml ] && cat .github/workflows/compile_${1}.yml | sed -E 's|[[:space:]]+(.*),|check_\1|g' | grep check_${2})
 endef
 
 # Parsing
@@ -165,6 +165,11 @@ ifdef PYTHON_EXECUTABLE
 	CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif
 
+# Check if the microRTPS agent is to be built
+ifdef BUILD_MICRORTPS_AGENT
+  CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
+endif
+
 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
@@ -303,7 +308,7 @@ check_%:
 	@echo
 
 uorb_graphs:
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib --file Tools/uorb_graph/graph_full
 	@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
 	@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph
@@ -468,25 +473,27 @@ validate_module_configs:
 .PHONY: clean submodulesclean submodulesupdate gazeboclean distclean
 
 clean:
-	@rm -rf "$(SRC_DIR)"/build
+	@[ ! -d "$(SRC_DIR)/build" ] || find "$(SRC_DIR)/build" -mindepth 1 -maxdepth 1 -type d -exec sh -c "echo {}; cmake --build {} -- clean || rm -rf {}" \; # use generated build system to clean, wipe build directory if it fails
+	@git submodule foreach git clean -dX --force # some submodules generate build artifacts in source
 
 submodulesclean:
 	@git submodule foreach --quiet --recursive git clean -ff -x -d
 	@git submodule update --quiet --init --recursive --force || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive --force
+	@git submodule update --init --recursive --force --jobs 4
 
 submodulesupdate:
-	@git submodule update --quiet --init --recursive || true
+	@git submodule update --quiet --init --recursive --jobs 4 || true
 	@git submodule sync --recursive
-	@git submodule update --init --recursive
+	@git submodule update --init --recursive --jobs 4
 
 gazeboclean:
 	@rm -rf ~/.gazebo/*
 
 distclean: gazeboclean
-	@git submodule deinit -f .
-	@git clean -ff -x -d -e ".project" -e ".cproject" -e ".idea" -e ".settings" -e ".vscode"
+	@git submodule deinit --force $(SRC_DIR)
+	@rm -rf "$(SRC_DIR)/build"
+	@git clean --force -X "$(SRC_DIR)/msg/" "$(SRC_DIR)/platforms/" "$(SRC_DIR)/posix-configs/" "$(SRC_DIR)/ROMFS/" "$(SRC_DIR)/src/" "$(SRC_DIR)/test/" "$(SRC_DIR)/Tools/"
 
 # Help / Error
 # --------------------------------------------------------------------

README.md

@@ -17,7 +17,7 @@ PX4 is highly portable, OS-independent and supports Linux, NuttX and QuRT out of
   * [VTOL](https://docs.px4.io/master/en/frames_vtol/)
   * [Autogyro](https://docs.px4.io/master/en/frames_autogyro/)
   * [Rover](https://docs.px4.io/master/en/frames_rover/)
-  * many more experimental types (Blimps, Boats, Submarines, Autogyros, etc)
+  * many more experimental types (Blimps, Boats, Submarines, High altitude balloons, etc)
 * Releases: [Downloads](https://github.com/PX4/PX4-Autopilot/releases)
 
 

ROMFS/CMakeLists.txt

@@ -115,6 +115,7 @@ add_custom_command(
 set(romfs_extract_stamp ${CMAKE_CURRENT_BINARY_DIR}/romfs_extract.stamp)
 add_custom_command(
 	OUTPUT ${romfs_extract_stamp}
+	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
 	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_extract_stamp}
 	WORKING_DIRECTORY ${romfs_gen_root_dir}

ROMFS/px4fmu_common/init.d-posix/CMakeLists.txt

@@ -34,6 +34,9 @@
 add_subdirectory(airframes)
 
 px4_add_romfs_files(
+	px4-rc.params
+	px4-rc.simulator
+	px4-rc.mavlink
 	rc.replay
 	rcS
 )

ROMFS/px4fmu_common/init.d-posix/airframes/10017_iris_ctrlalloc

@@ -10,43 +10,39 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc
 
-if [ $AUTOCNF = yes ]
-then
-	param set MPC_USE_HTE 0
+param set-default MPC_USE_HTE 0
 
-	param set VM_MASS 1.5
-	param set VM_INERTIA_XX 0.03
-	param set VM_INERTIA_YY 0.03
-	param set VM_INERTIA_ZZ 0.05
+param set-default VM_MASS 1.5
+param set-default VM_INERTIA_XX 0.03
+param set-default VM_INERTIA_YY 0.03
+param set-default VM_INERTIA_ZZ 0.05
 
-	param set CA_AIRFRAME 0
-	param set CA_METHOD 1
-	param set CA_ACT0_MIN 0.0
-	param set CA_ACT1_MIN 0.0
-	param set CA_ACT2_MIN 0.0
-	param set CA_ACT3_MIN 0.0
-	param set CA_ACT0_MAX 1.0
-	param set CA_ACT1_MAX 1.0
-	param set CA_ACT2_MAX 1.0
-	param set CA_ACT3_MAX 1.0
+param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
 
-	param set CA_MC_R0_PX 0.1515
-	param set CA_MC_R0_PY 0.245
-	param set CA_MC_R0_CT 6.5
-	param set CA_MC_R0_KM 0.05
-	param set CA_MC_R1_PX -0.1515
-	param set CA_MC_R1_PY -0.1875
-	param set CA_MC_R1_CT 6.5
-	param set CA_MC_R1_KM 0.05
-	param set CA_MC_R2_PX 0.1515
-	param set CA_MC_R2_PY -0.245
-	param set CA_MC_R2_CT 6.5
-	param set CA_MC_R2_KM -0.05
-	param set CA_MC_R3_PX -0.1515
-	param set CA_MC_R3_PY 0.1875
-	param set CA_MC_R3_CT 6.5
-	param set CA_MC_R3_KM -0.05
-
-fi
+param set-default CA_MC_R0_PX 0.1515
+param set-default CA_MC_R0_PY 0.245
+param set-default CA_MC_R0_CT 6.5
+param set-default CA_MC_R0_KM 0.05
+param set-default CA_MC_R1_PX -0.1515
+param set-default CA_MC_R1_PY -0.1875
+param set-default CA_MC_R1_CT 6.5
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.1515
+param set-default CA_MC_R2_PY -0.245
+param set-default CA_MC_R2_CT 6.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.1515
+param set-default CA_MC_R3_PY 0.1875
+param set-default CA_MC_R3_CT 6.5
+param set-default CA_MC_R3_KM -0.05
 
 set MIXER direct

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_RNG_AID 1
-	param set EKF2_RNG_A_HMAX 10
-fi
+param set-default EKF2_RNG_AID 1
+param set-default EKF2_RNG_A_HMAX 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/10020_if750a

@@ -8,15 +8,12 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Multi GPS blending (as the model has 2 GPS's)
-	param set EKF2_GPS_MASK 7 # Uses speed, hpos and vpos accuracy
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_MODE_OUT 2
-	param set MNT_DO_STAB 2
-fi
+# EKF2: Multi GPS blending (as the model has 2 GPS's)
+param set-default SENS_GPS_MASK 7
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_DO_STAB 2
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -7,16 +7,14 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2
-	param set EKF2_AID_MASK 2
-	param set EKF2_EVP_NOISE 0.05
-	param set EKF2_EVA_NOISE 0.05
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
 
-	# LPE: Flow-only mode
-	param set LPE_FUSION 242
-	param set LPE_FAKE_ORIGIN 1
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
 
-	param set MPC_ALT_MODE 2
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -7,12 +7,9 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# enable fusion of landing target velocity
-	param set LTEST_MODE 1
-	param set PLD_HACC_RAD 0.1
-fi
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
 
 # Start up Landing Target Estimator module
 landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1012_iris_rplidar

@@ -7,7 +7,5 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set LPE_FUSION 242
-fi
+param set-default LPE_FUSION 242
+

ROMFS/px4fmu_common/init.d-posix/airframes/1013_iris_vision

@@ -7,15 +7,13 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Vision position and heading
-	param set EKF2_AID_MASK 24
-	param set EKF2_EV_DELAY 5
+# EKF2: Vision position and heading
+param set-default EKF2_AID_MASK 24
+param set-default EKF2_EV_DELAY 5
 
-	# LPE: Vision + baro
-	param set LPE_FUSION 132
+# LPE: Vision + baro
+param set-default LPE_FUSION 132
+
+# AEQ: External heading set to use vision input
+param set-default ATT_EXT_HDG_M 1
 
-	# AEQ: External heading set to use vision input
-	param set ATT_EXT_HDG_M 1
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1014_solo

@@ -7,10 +7,7 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.1
-	param set MC_ROLLRATE_P 0.1
-fi
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_ROLLRATE_P 0.1
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1015_iris_obs_avoid

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set COM_OBS_AVOID 1
-	param set MPC_XY_CRUISE 5.0
-fi
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1016_iris_rtps

@@ -1,8 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (RTPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris

ROMFS/px4fmu_common/init.d-posix/airframes/1016_iris_rtps.post

@@ -1,4 +0,0 @@
-#!/bin/sh
-# shellcheck disable=SC2154
-
-micrortps_client start -t UDP -r $((2019+2*px4_instance)) -s $((2020+2*px4_instance))

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -7,15 +7,12 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2
-	param set EKF2_AID_MASK 2
-	param set SENS_FLOW_ROT 0
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default SENS_FLOW_ROT 0
 
-	# LPE: Flow-only mode
-	param set LPE_FUSION 242
-	param set LPE_FAKE_ORIGIN 1
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
 
-	param set MPC_ALT_MODE 2
-fi
+param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1018_iris_vision_velocity

@@ -7,9 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Vision velocity and heading
-	param set EKF2_AID_MASK 272
-	param set EKF2_EV_DELAY 5
-fi
+# EKF2: Vision velocity and heading
+param set-default EKF2_AID_MASK 272
+param set-default EKF2_EV_DELAY 5

ROMFS/px4fmu_common/init.d-posix/airframes/1019_iris_dual_gps

@@ -7,8 +7,5 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Multi GPS blending
-	param set EKF2_GPS_MASK 7 # Uses speed, hpos and vpos accuracy
-fi
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1020_uuv_generic

@@ -5,16 +5,13 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
-	#param set CBRK_GPSFAIL 240024
-fi
+#param set CBRK_GPSFAIL 240024
 
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

ROMFS/px4fmu_common/init.d-posix/airframes/1021_uuv_hippocampus

@@ -5,16 +5,13 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
-	#param set CBRK_GPSFAIL 240024
-fi
+#param set CBRK_GPSFAIL 240024
 
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -5,15 +5,11 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
-
-fi
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
 set PWM_OUT 12345678
 set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -5,54 +5,50 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set EKF2_MAG_ACCLIM 0
-	param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
 
-	param set FW_LND_AIRSPD_SC 1
-	param set FW_LND_ANG 8
-	param set FW_THR_LND_MAX 0
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
-	param set FW_L1_PERIOD 12
+param set-default FW_L1_PERIOD 12
 
-	param set FW_MAN_P_MAX 30
+param set-default FW_MAN_P_MAX 30
 
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PR_FF 0.2
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.2
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
 
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
 
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_CRUISE 0.25
 
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 30
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-
-fi
+param set-default RWTO_TKOFF 1
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1031_plane_cam

@@ -5,10 +5,8 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	# Camera trigger interface is MAVLink
-	param set TRIG_INTERFACE 3
-	# Distance trigger mode enabled
-	param set TRIG_MODE 4
-fi
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1032_plane_catapult

@@ -5,8 +5,5 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	param set RWTO_TKOFF 0
+param set-default RWTO_TKOFF 0
 
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1033_plane_lidar

@@ -5,8 +5,5 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_LND_USETER 1
+param set-default FW_LND_USETER 1
 
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1033_rascal

@@ -5,54 +5,55 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	#param set FW_THR_SLEW_MAX 0.3 # fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	#param set RWTO_MAX_THR 0.6		# fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
+param set-default RWTO_TKOFF 1
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set-default RWTO_MAX_THR 0.6
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
-fi
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -5,54 +5,54 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	#param set FW_THR_SLEW_MAX 0.3 # fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	#param set RWTO_MAX_THR 0.6		# fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
+param set-default RWTO_TKOFF 1
 
-fi
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set RWTO_MAX_THR 0.6
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1035_techpod

@@ -5,43 +5,39 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set EKF2_MAG_ACCLIM 0
-	param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
 
-	param set FW_LND_AIRSPD_SC 1
-	param set FW_LND_ANG 8
-	param set FW_THR_LND_MAX 0
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
-	param set FW_L1_PERIOD 15
+param set-default FW_L1_PERIOD 15
 
-	param set FW_P_TC 0.5
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.5
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.7
-	param set FW_RR_FF 0.20
-	param set FW_RR_I 0.02
-	param set FW_RR_P 0.22
+param set-default FW_R_TC 0.7
+param set-default FW_RR_FF 0.20
+param set-default FW_RR_I 0.02
+param set-default FW_RR_P 0.22
 
-	param set FW_L1_PERIOD 12
+param set-default FW_L1_PERIOD 12
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 30
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-
-fi
+param set-default RWTO_TKOFF 1
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -5,52 +5,46 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
-
-fi
+param set-default RWTO_TKOFF 1
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -7,50 +7,46 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.25
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
-	param set MC_YAW_P 1.6
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_FWD_THRUST_EN 4
-	param set VT_F_TRANS_THR 0.75
-	param set VT_MOT_ID 1234
-	param set VT_FW_MOT_OFFID 1234
-	param set VT_B_TRANS_DUR 8
-	param set VT_TYPE 2
-
-fi
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
 
 set MAV_TYPE 22
 

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -7,44 +7,40 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_I 0.2
-	param set FW_PR_P 0.3
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.33
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_I 0.2
+param set-default FW_PR_P 0.3
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.33
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
+param set-default MC_ROLLRATE_P 0.3
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_F_TRANS_DUR 1.5
-	param set VT_F_TRANS_THR 0.7
-	param set VT_TYPE 0
+param set-default VT_F_TRANS_DUR 1.5
+param set-default VT_F_TRANS_THR 0.7
+param set-default VT_TYPE 0
 
-	param set WV_EN 0
-
-fi
+param set-default WV_EN 0
 
 set MAV_TYPE 20
 

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -7,48 +7,44 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.38
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.38
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_YAW_P 1.6
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_B_TRANS_DUR 8
-	param set VT_FWD_THRUST_EN 4
-	param set VT_MOT_ID 1234
-	param set VT_TILT_TRANS 0.6
-	param set VT_TYPE 1
-
-fi
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_MOT_ID 1234
+param set-default VT_TILT_TRANS 0.6
+param set-default VT_TYPE 1
 
 set MAV_TYPE 21
 

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -7,53 +7,50 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.25
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
-	param set MC_YAW_P 1.6
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_FWD_THRUST_EN 4
-	param set VT_F_TRANS_THR 0.75
-	param set VT_MOT_ID 1234
-	param set VT_FW_MOT_OFFID 1234
-	param set VT_B_TRANS_DUR 8
-	param set VT_TYPE 2
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
 
-	param set RC_MAP_AUX1 8
-	param set RC_MAP_AUX2 9
-	param set RC_MAP_AUX3 10
-fi
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
 
 set MAV_TYPE 22
 

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -5,32 +5,28 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_L1_PERIOD 10
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 0.001
-	param set GND_SPEED_I 3
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 4
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_L1_PERIOD 10
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_I 3
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -6,31 +6,27 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 3
-	param set GND_SPEED_I 0.001
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 4
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1062_tf-r1

@@ -10,32 +10,28 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 3
-	param set GND_SPEED_I 0.001
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 15
-	param set GND_SPEED_MAX 25
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 15
+param set-default GND_SPEED_MAX 25
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 3.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 3.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -5,32 +5,28 @@
 
 . ${R}etc/init.d/rc.boat_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_L1_PERIOD 100
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 0.001
-	param set GND_SPEED_I 8
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 2
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 1
-	param set GND_THR_CRUISE 0.85
-	param set GND_THR_MAX 1
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_L1_PERIOD 100
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_I 8
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 2
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 1
+param set-default GND_THR_CRUISE 0.85
+param set-default GND_THR_MAX 1
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 11
 

ROMFS/px4fmu_common/init.d-posix/airframes/17001_tf-g1

@@ -12,52 +12,48 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set ASPD_STALL 10.0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_P_RMAX_NEG 20.0
-	param set FW_P_RMAX_POS 60.0
-	param set FW_W_RMAX 10
-	param set FW_W_EN 1
+param set-default FW_AIRSPD_STALL 8
 
-	param set FW_PR_IMAX 0.4
-	param set FW_R_TC 0.4
-	param set FW_RR_FF 0.5
-	param set FW_RR_I 0.1
-	param set FW_RR_IMAX 0.2
-	param set FW_RR_P 0.08
+param set-default FW_P_RMAX_NEG 20.0
+param set-default FW_P_RMAX_POS 60.0
+param set-default FW_W_RMAX 10
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 50
-	param set MIS_TAKEOFF_ALT 3
+param set-default FW_PR_IMAX 0.4
+param set-default FW_R_TC 0.4
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_I 0.1
+param set-default FW_RR_IMAX 0.2
+param set-default FW_RR_P 0.08
 
-	param set NAV_ACC_RAD 20
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 100
+param set-default MIS_LTRMIN_ALT 50
+param set-default MIS_TAKEOFF_ALT 3
 
-	param set RWTO_TKOFF 1
+param set-default NAV_ACC_RAD 20
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 100
 
-	param set FW_ARSP_SCALE_EN 0
+param set-default RWTO_TKOFF 1
 
-	param set FW_AIRSPD_MAX 35
-	param set FW_AIRSPD_MIN 7
-	param set FW_AIRSPD_TRIM 15
+param set-default FW_ARSP_SCALE_EN 0
 
-	param set FW_P_LIM_MAX 25
-	param set FW_P_LIM_MIN -5
-	param set FW_R_LIM 30
+param set-default FW_AIRSPD_MAX 35
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 15
 
-	param set FW_MAN_P_MAX 30.0
-	param set FW_MAN_R_MAX 30.0
+param set-default FW_P_LIM_MAX 25
+param set-default FW_P_LIM_MIN -5
+param set-default FW_R_LIM 30
 
-	param set FW_THR_CRUISE 0.8
-	param set FW_THR_IDLE 0
-	param set COM_DISARM_PRFLT 0
-
-fi
+param set-default FW_MAN_P_MAX 30.0
+param set-default FW_MAN_R_MAX 30.0
 
+param set-default FW_THR_CRUISE 0.8
+param set-default FW_THR_IDLE 0
+param set-default COM_DISARM_PRFLT 0
 
 set MIXER_FILE etc/mixers-sitl/autogyro_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/3011_hexarotor_x

@@ -9,24 +9,21 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.1
-	param set MC_PITCHRATE_I 0.05
-	param set MC_PITCH_P 6.0
-	param set MC_ROLLRATE_P 0.15
-	param set MC_ROLLRATE_I 0.1
-	param set MC_ROLL_P 6.0
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCH_P 6.0
+param set-default MC_ROLLRATE_P 0.15
+param set-default MC_ROLLRATE_I 0.1
+param set-default MC_ROLL_P 6.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
+param set-default RTL_DESCEND_ALT 10
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_DO_STAB 2
-fi
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_DO_STAB 2
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/airframes/6011_typhoon_h480

@@ -7,27 +7,24 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.0800
-	param set MC_PITCHRATE_I 0.0400
-	param set MC_PITCHRATE_D 0.0010
-	param set MC_PITCH_P 9.0
-	param set MC_ROLLRATE_P 0.0800
-	param set MC_ROLLRATE_I 0.0400
-	param set MC_ROLLRATE_D 0.0010
-	param set MC_ROLL_P 9.0
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
+param set-default RTL_DESCEND_ALT 10
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_MODE_OUT 2
-	param set MAV_PROTO_VER 2
-fi
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MAV_PROTO_VER 2
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_ctrlalloc

@@ -8,66 +8,63 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc
 
-if [ $AUTOCNF = yes ]
-then
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
-	param set RTL_LAND_DELAY 0
+param set-default RTL_DESCEND_ALT 10
+param set-default RTL_LAND_DELAY 0
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 0
-	param set MAV_PROTO_VER 2
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 0
+param set-default MAV_PROTO_VER 2
 
-	param set MPC_USE_HTE 0
+param set-default MPC_USE_HTE 0
 
-	param set VM_MASS 2.66
-	param set VM_INERTIA_XX 0.06
-	param set VM_INERTIA_YY 0.06
-	param set VM_INERTIA_ZZ 0.10
+param set-default VM_MASS 2.66
+param set-default VM_INERTIA_XX 0.06
+param set-default VM_INERTIA_YY 0.06
+param set-default VM_INERTIA_ZZ 0.10
 
-	param set CA_AIRFRAME 0
-	param set CA_METHOD 1
-	param set CA_ACT0_MIN 0.0
-	param set CA_ACT1_MIN 0.0
-	param set CA_ACT2_MIN 0.0
-	param set CA_ACT3_MIN 0.0
-	param set CA_ACT4_MIN 0.0
-	param set CA_ACT5_MIN 0.0
-	param set CA_ACT0_MAX 1.0
-	param set CA_ACT1_MAX 1.0
-	param set CA_ACT2_MAX 1.0
-	param set CA_ACT3_MAX 1.0
-	param set CA_ACT4_MAX 1.0
-	param set CA_ACT5_MAX 1.0
+param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT4_MIN 0.0
+param set-default CA_ACT5_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
+param set-default CA_ACT4_MAX 1.0
+param set-default CA_ACT5_MAX 1.0
 
-	param set CA_MC_R0_PX 0.0
-	param set CA_MC_R0_PY 1.0
-	param set CA_MC_R0_CT 9.5
-	param set CA_MC_R0_KM -0.05
-	param set CA_MC_R1_PX 0.0
-	param set CA_MC_R1_PY -1.0
-	param set CA_MC_R1_CT 9.5
-	param set CA_MC_R1_KM 0.05
-	param set CA_MC_R2_PX 0.866025
-	param set CA_MC_R2_PY -0.5
-	param set CA_MC_R2_CT 9.5
-	param set CA_MC_R2_KM -0.05
-	param set CA_MC_R3_PX -0.866025
-	param set CA_MC_R3_PY 0.5
-	param set CA_MC_R3_CT 9.5
-	param set CA_MC_R3_KM 0.05
-	param set CA_MC_R4_PX 0.866025
-	param set CA_MC_R4_PY 0.5
-	param set CA_MC_R4_CT 9.5
-	param set CA_MC_R4_KM 0.05
-	param set CA_MC_R5_PX -0.866025
-	param set CA_MC_R5_PY -0.5
-	param set CA_MC_R5_CT 9.5
-	param set CA_MC_R5_KM -0.05
-fi
+param set-default CA_MC_R0_PX 0.0
+param set-default CA_MC_R0_PY 1.0
+param set-default CA_MC_R0_CT 9.5
+param set-default CA_MC_R0_KM -0.05
+param set-default CA_MC_R1_PX 0.0
+param set-default CA_MC_R1_PY -1.0
+param set-default CA_MC_R1_CT 9.5
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.866025
+param set-default CA_MC_R2_PY -0.5
+param set-default CA_MC_R2_CT 9.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.866025
+param set-default CA_MC_R3_PY 0.5
+param set-default CA_MC_R3_CT 9.5
+param set-default CA_MC_R3_KM 0.05
+param set-default CA_MC_R4_PX 0.866025
+param set-default CA_MC_R4_PY 0.5
+param set-default CA_MC_R4_CT 9.5
+param set-default CA_MC_R4_KM 0.05
+param set-default CA_MC_R5_PX -0.866025
+param set-default CA_MC_R5_PY -0.5
+param set-default CA_MC_R5_CT 9.5
+param set-default CA_MC_R5_KM -0.05
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -46,8 +46,6 @@ px4_add_romfs_files(
 	1014_solo
 	1015_iris_obs_avoid
 	1015_iris_obs_avoid.post
-	1016_iris_rtps
-	1016_iris_rtps.post
 	1017_iris_opt_flow_mockup
 	1018_iris_vision_velocity
 	1019_iris_dual_gps

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -0,0 +1,32 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+udp_offboard_port_local=$((14580+px4_instance))
+udp_offboard_port_remote=$((14540+px4_instance))
+[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
+udp_onboard_payload_port_local=$((14280+px4_instance))
+udp_onboard_payload_port_remote=$((14030+px4_instance))
+udp_onboard_gimbal_port_local=$((13030+px4_instance))
+udp_onboard_gimbal_port_remote=$((13280+px4_instance))
+udp_gcs_port_local=$((18570+px4_instance))
+
+# GCS link
+mavlink start -x -u $udp_gcs_port_local -r 4000000 -f
+mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u $udp_gcs_port_local
+mavlink stream -r 50 -s LOCAL_POSITION_NED -u $udp_gcs_port_local
+mavlink stream -r 50 -s GLOBAL_POSITION_INT -u $udp_gcs_port_local
+mavlink stream -r 50 -s ATTITUDE -u $udp_gcs_port_local
+mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_gcs_port_local
+mavlink stream -r 50 -s ATTITUDE_TARGET -u $udp_gcs_port_local
+mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u $udp_gcs_port_local
+mavlink stream -r 20 -s RC_CHANNELS -u $udp_gcs_port_local
+mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local
+
+# API/Offboard link
+mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote
+
+# Onboard link to camera
+mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
+
+# Onboard link to gimbal
+mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote

ROMFS/px4fmu_common/init.d-posix/px4-rc.params

@@ -0,0 +1,5 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+#param set MAV_SYS_ID $((px4_instance+1))
+#param set IMU_INTEG_RATE 250

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -0,0 +1,20 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+simulator_tcp_port=$((4560+px4_instance))
+
+# Check if PX4_SIM_HOSTNAME environment variable is empty
+# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
+# If both are empty use localhost for simulator
+if [ -z "${PX4_SIM_HOSTNAME}" ]; then
+  if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
+    echo "PX4 SIM HOST: localhost"
+    simulator start -c $simulator_tcp_port
+  else
+    echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+    simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
+  fi
+else
+  echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+  simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
+fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -5,7 +5,8 @@
 # shellcheck disable=SC1091
 . px4-alias.sh
 
-SCRIPT_DIR="$(CDPATH='' cd -- "$(dirname -- "$0")" && pwd)"
+#search path for sourcing px4-rc.*
+PATH="$PATH:${R}etc/init.d-posix"
 
 #
 # Main SITL startup script
@@ -45,9 +46,9 @@ else
 	# Find the matching Autostart ID (file name has the form: [0-9]+_${PX4_SIM_MODEL})
 	# TODO: unify with rc.autostart generation
 	# shellcheck disable=SC2012
-	REQUESTED_AUTOSTART=$(ls "$SCRIPT_DIR/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
+	REQUESTED_AUTOSTART=$(ls "${R}etc/init.d-posix/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
 	if [ -z "$REQUESTED_AUTOSTART" ]; then
-		echo "Error: Unknown model $PX4_SIM_MODEL (not found by name on $SCRIPT_DIR/airframes)"
+		echo "Error: Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
 		echo "Info: found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
@@ -104,15 +105,6 @@ fi
 # multi-instance setup
 # shellcheck disable=SC2154
 param set MAV_SYS_ID $((px4_instance+1))
-simulator_tcp_port=$((4560+px4_instance))
-udp_offboard_port_local=$((14580+px4_instance))
-udp_offboard_port_remote=$((14540+px4_instance))
-[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
-udp_onboard_payload_port_local=$((14280+px4_instance))
-udp_onboard_payload_port_remote=$((14030+px4_instance))
-udp_onboard_gimbal_port_local=$((13030+px4_instance))
-udp_onboard_gimbal_port_remote=$((13280+px4_instance))
-udp_gcs_port_local=$((18570+px4_instance))
 
 if [ $AUTOCNF = yes ]
 then
@@ -216,25 +208,14 @@ fi
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250
 
+#user defined params for instances can be in PATH
+. px4-rc.params
+
 dataman start
 # only start the simulator if not in replay mode, as both control the lockstep time
 if ! replay tryapplyparams
 then
-  # Check if PX4_SIM_HOSTNAME environment variable is empty
-  # If empty check if PX4_SIM_HOST_ADDR environment variable is empty
-  # If both are empty use localhost for simulator
-  if [ -z "${PX4_SIM_HOSTNAME}" ]; then
-    if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-      echo "PX4 SIM HOST: localhost"
-      simulator start -c $simulator_tcp_port
-    else
-      echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
-      simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port 
-    fi
-  else
-    echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
-    simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port 
-  fi
+  . px4-rc.simulator
 fi
 load_mon start
 battery_simulator start
@@ -244,6 +225,12 @@ sensors start
 commander start
 navigator start
 
+# Try to start the micrortps_client with UDP transport if module exists
+if px4-micrortps_client status > /dev/null 2>&1
+then
+	# shellcheck disable=SC2154
+	micrortps_client start -t UDP $((2019+2*px4_instance)) -s $((2020+2*px4_instance))
+fi
 
 if param greater -s MNT_MODE_IN -1
 then
@@ -272,32 +259,8 @@ fi
 #
 . ${R}etc/init.d/rc.vehicle_setup
 
-if [ -e etc/init.d-posix/rc.mavlink_override ]
-then
-	echo "Running non-default mavlink config rc.mavlink_override"
-	. ${R}etc/init.d-posix/rc.mavlink_override
-else
-	# GCS link
-	mavlink start -x -u $udp_gcs_port_local -r 4000000 -f
-	mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u $udp_gcs_port_local
-	mavlink stream -r 50 -s LOCAL_POSITION_NED -u $udp_gcs_port_local
-	mavlink stream -r 50 -s GLOBAL_POSITION_INT -u $udp_gcs_port_local
-	mavlink stream -r 50 -s ATTITUDE -u $udp_gcs_port_local
-	mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_gcs_port_local
-	mavlink stream -r 50 -s ATTITUDE_TARGET -u $udp_gcs_port_local
-	mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u $udp_gcs_port_local
-	mavlink stream -r 20 -s RC_CHANNELS -u $udp_gcs_port_local
-	mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local
-
-	# API/Offboard link
-	mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote
-
-	# Onboard link to camera
-	mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
-
-	# Onboard link to gimbal
-	mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
-fi
+#user defined mavlink streams for instances can be in PATH
+. px4-rc.mavlink
 
 # execute autostart post script if any
 [ -e "$autostart_file".post ] && . "$autostart_file".post

ROMFS/px4fmu_common/init.d/airframes/13010_claire

@@ -14,7 +14,7 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 
-param set-default PWM_AUX_DISARMED 1000
+param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
 param set-default PWM_AUX_MIN 1000
 param set-default PWM_AUX_RATE 50

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -112,7 +112,7 @@ param set-default MPC_YAWRAUTO_MAX 20
 param set-default NAV_DLL_ACT 0
 param set-default NAV_LOITER_RAD 100
 
-param set-default PWM_AUX_DISARMED 950
+param set-default PWM_AUX_DISARM 950
 
 param set-default PWM_MAIN_DIS5 1500
 param set-default PWM_MAIN_DIS6 1500

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -71,7 +71,6 @@ param set-default MPC_JERK_AUTO 4
 param set-default MPC_LAND_SPEED 1
 param set-default MPC_MAN_TILT_MAX 25
 param set-default MPC_MAN_Y_MAX 40
-param set-default MPC_POS_MODE 3
 param set-default MPC_SPOOLUP_TIME 1.5
 param set-default MPC_THR_HOVER 0.45
 param set-default MPC_TILTMAX_AIR 25
@@ -111,5 +110,6 @@ set MAV_TYPE 22
 set MIXER babyshark
 set MIXER_AUX pass
 
+# Mark outputs for the alternate rate
+# or D-Shot
 set PWM_OUT 5678
-set PWM_AUX_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/24001_dodeca_cox

@@ -31,7 +31,7 @@ set VEHICLE_TYPE mc
 param set-default NAV_ACC_RAD 2
 
 param set-default PWM_AUX_RATE 400
-param set-default PWM_AUX_DISARMED 900
+param set-default PWM_AUX_DISARM 900
 param set-default PWM_AUX_MIN 1075
 param set-default PWM_AUX_MAX 1950
 

ROMFS/px4fmu_common/init.d/airframes/4040_reaper

@@ -33,7 +33,7 @@ param set-default MC_YAW_P 4
 
 param set-default NAV_ACC_RAD 2
 
-param set-default PWM_AUX_DISARMED 950
+param set-default PWM_AUX_DISARM 950
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_MIN 1100
 param set-default PWM_MAIN_MAX 1900

ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover

@@ -2,7 +2,7 @@
 #
 # @name Aion Robotics R1 UGV
 #
-# @url http://docs.aionrobotics.com/en/latest/r1-ugv.html
+# @url https://www.aionrobotics.com/r1
 #
 # @type Rover
 # @class Rover

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -16,6 +16,8 @@ param set-default COM_POS_FS_EPV 30
 param set-default COM_POS_FS_GAIN 0
 param set-default COM_POS_FS_PROB 1
 param set-default COM_VEL_FS_EVH 5
+# Disable preflight disarm to not interfere with external launching
+param set-default COM_DISARM_PRFLT -1
 
 param set-default EKF2_ARSP_THR 8
 param set-default EKF2_FUSE_BETA 1

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -26,6 +26,12 @@ then
 	batt_smbus start -X
 fi
 
+# Start batmon driver if enabled using BATMON_DRIVER_EN
+if param compare -s BATMON_DRIVER_EN 1
+then
+	batmon start -X  #start on external bus
+fi
+
 # Sensors on the PWM interface bank
 if param compare -s SENS_EN_LL40LS 1
 then
@@ -111,14 +117,22 @@ fi
 # ADIS16448 spi external IMU
 if param compare -s SENS_EN_ADIS164X 1
 then
-	adis16448 -S start
+	if param compare -s SENS_OR_ADIS164X 0
+	then
+		adis16448 -S start
+	fi
+	if param compare -s SENS_OR_ADIS164X 4
+	then
+		adis16448 -S start -R 4
+	fi
 fi
 
 # probe for optional external I2C devices
 if param compare SENS_EXT_I2C_PRB 1
 then
+	icm20948_i2c_passthrough -X -q start
+
 	# compasses
-	ak09916 -X -R 6 -q start # external AK09916 (Here2) is rotated 270 degrees yaw
 	hmc5883 -T -X -q start
 	ist8308 -X -q start
 	ist8310 -X -q start
@@ -127,6 +141,9 @@ then
 	qmc5883l -X -q start
 	rm3100 -X -q start
 
+	# start last (wait for possible icm20948 passthrough mode)
+	ak09916 -X -q start
+
 	# differential pressure sensors
 	if [ ${VEHICLE_TYPE} = fw -o ${VEHICLE_TYPE} = vtol ]
 	then

ROMFS/px4fmu_common/init.d/rc.vtol_defaults

@@ -23,6 +23,7 @@ param set-default MPC_XY_ERR_MAX 5
 param set-default MPC_XY_VEL_MAX 4
 param set-default MPC_Z_VEL_MAX_DN 1.5
 param set-default MPC_JERK_MAX 4.5
+param set-default MPC_YAW_MODE 4
 
 param set-default NAV_ACC_RAD 3
 

ROMFS/px4fmu_common/init.d/rcS

@@ -30,7 +30,7 @@ set FRC /fs/microsd/etc/rc.txt
 set IOFW "/etc/extras/px4_io-v2_default.bin"
 set IO_PRESENT no
 set LOGGER_ARGS ""
-set LOGGER_BUF  14
+set LOGGER_BUF 8
 set MAV_TYPE none
 set MIXER none
 set MIXER_AUX none
@@ -81,33 +81,6 @@ then
 			hardfault_log reset
 		fi
 	fi
-
-	# Prevent MacOS and Ubuntu from creating unnecessary temporary files on the microSD card
-
-	# block MacOS Spotlight indexing (.Spotlight-V100 folder)
-	if [ ! -f "/fs/microsd/.metadata_never_index" ]; then
-		cat > /fs/microsd/.metadata_never_index
-	fi
-
-	# block MacOS trashes
-	if [ ! -f "/fs/microsd/.Trashes" ]; then
-		cat > /fs/microsd/.Trashes
-	fi
-
-	# block MacOS logging of filesystem events
-	if [ ! -d "/fs/microsd/.fseventsd" ]; then
-		mkdir /fs/microsd/.fseventsd
-	fi
-
-	if [ ! -f "/fs/microsd/.fseventsd/no_log" ]; then
-		cat > /fs/microsd/.fseventsd/no_log
-	fi
-
-	# block Ubuntu trash
-	if [ ! -f "/fs/microsd/.Trash-1000" ]; then
-		cat > /fs/microsd/.Trash-1000
-	fi
-
 else
 	# tune SD_INIT
 	set STARTUP_TUNE 14 # tune 14 = SD_INIT
@@ -254,6 +227,34 @@ else
 		param set SYS_AUTOCONFIG 0
 	fi
 
+	#
+	# Check if UAVCAN is enabled, default to it for ESCs.
+	#
+	if param greater -s UAVCAN_ENABLE 0
+	then
+		# Start core UAVCAN module.
+		if uavcan start
+		then
+			if param greater UAVCAN_ENABLE 1
+			then
+				# Start UAVCAN firmware update server and dynamic node ID allocation server.
+				uavcan start fw
+				tune_control play -t 1
+				if param greater UAVCAN_ENABLE 2
+				then
+					set OUTPUT_MODE uavcan_esc
+				fi
+			fi
+		else
+			tune_control play error
+		fi
+	else
+		if param greater -s UAVCAN_V1_ENABLE 0
+		then
+			uavcan_v1 start
+		fi
+	fi
+
 	#
 	# Check if PX4IO present and update firmware if needed.
 	# Assumption IOFW set to firmware file and IO_PRESENT = no
@@ -285,6 +286,8 @@ else
 					else
 						tune_control play -t 18 # tune 18 = PROG_PX4IO_ERR
 					fi
+				else
+					tune_control stop
 				fi
 			fi
 		fi
@@ -374,21 +377,30 @@ else
 
 	if param greater -s TRIG_MODE 0
 	then
-		# We ONLY support trigger on pins 5+6 or 7+8 when simultanously using AUX for actuator output.
-		if param compare TRIG_PINS 56
+		if param compare TRIG_PINS_EX 0
 		then
-			# clear pins 5 and 6
-			set FMU_MODE pwm4
-			set AUX_MODE pwm4
-		else
-			if param compare TRIG_PINS 78
+			# We ONLY support trigger on pins 5+6 or 7+8 when simultanously using AUX for actuator output.
+			if param compare TRIG_PINS 56
 			then
-				# clear pins 7 and 8
-				set FMU_MODE pwm6
-				set AUX_MODE pwm6
+				# clear pins 5 and 6
+				set FMU_MODE pwm4
+				set AUX_MODE pwm4
 			else
-				set FMU_MODE none
-				set AUX_MODE none
+				if param compare TRIG_PINS 78
+				then
+					# clear pins 7 and 8
+					set FMU_MODE pwm6
+					set AUX_MODE pwm6
+				else
+					set FMU_MODE none
+					set AUX_MODE none
+				fi
+			fi
+		else
+			if param compare TRIG_PINS_EX 12288
+			then
+				set FMU_MODE pwm12
+				set AUX_MODE pwm12
 			fi
 		fi
 
@@ -396,34 +408,6 @@ else
 		camera_feedback start
 	fi
 
-	#
-	# Check if UAVCAN is enabled, default to it for ESCs.
-	#
-	if param greater -s UAVCAN_ENABLE 0
-	then
-		# Start core UAVCAN module.
-		if uavcan start
-		then
-			if param greater UAVCAN_ENABLE 1
-			then
-				# Start UAVCAN firmware update server and dynamic node ID allocation server.
-				uavcan start fw
-				tune_control play -t 1
-				if param greater UAVCAN_ENABLE 2
-				then
-					set OUTPUT_MODE uavcan_esc
-				fi
-			fi
-		else
-			tune_control play error
-		fi
-	fi
-
-	if param greater -s UAVCAN_V1_ENABLE 0
-	then
-		uavcan_v1 start
-	fi
-
 	#
 	# Optional board mavlink streams: rc.board_mavlink
 	#

Tools/astyle/check_code_style_all.sh

@@ -59,7 +59,7 @@ if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ]; then
 	fi
 fi
 
-${DIR}/files_to_check_code_style.sh | xargs -n 1 -P 8 -I % ${DIR}/check_code_style.sh %
+${DIR}/files_to_check_code_style.sh | xargs -P 8 -I % ${DIR}/check_code_style.sh %
 
 if [ $? -eq 0 ]; then
     echo "Format checks passed"

Tools/astyle/files_to_check_code_style.sh

@@ -22,4 +22,5 @@ exec find boards msg src platforms test \
     -path src/modules/micrortps_bridge/micro-CDR -prune -o \
     -path src/modules/micrortps_bridge/microRTPS_client -prune -o \
     -path test/mavsdk_tests/catch2 -prune -o \
+    -path src/lib/crypto/monocypher -prune -o \
     -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) | grep $PATTERN

Tools/bloaty_static_ram.bloaty

@@ -0,0 +1,13 @@
+custom_data_source: {
+  name: "bloaty_static_ram"
+  base_data_source: "sections"
+
+  rewrite: {
+    pattern: "^\\.bss"
+    replacement: "ram"
+  }
+  rewrite: {
+    pattern: "^\\.data"
+    replacement: "ram"
+  }
+}

Tools/build_micrortps_agent.sh

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+set -e
+
+SCRIPT_DIR=$0
+if [[ ${SCRIPT_DIR:0:1} != '/' ]]; then
+  SCRIPT_DIR=$(dirname $(realpath -s "$PWD/$0"))
+fi
+
+PX4_DIR=$(cd "$(dirname $(dirname $SCRIPT_DIR))" && pwd)
+
+if [ -d $PX4_DIR/build/*_rtps ]; then
+  cd $PX4_DIR/build/*_rtps/src/modules/micrortps_bridge/micrortps_agent/
+  cmake -Bbuild
+  cmake --build build -j$(nproc --all)
+fi

Tools/cryptotools.py

@@ -81,7 +81,8 @@ def sign(bin_file_path, key_file_path=None, generated_key_file=None):
         # Align to 4 bytes. Signature always starts at
         # 4 byte aligned address, but the signee size
         # might not be aligned
-        signee_bin += bytearray(b'\xff')*(4-len(signee_bin)%4)
+        if len(signee_bin)%4 != 0:
+            signee_bin += bytearray(b'\xff')*(4-len(signee_bin)%4)
 
     try:
         with open(key_file_path,mode='r') as f:
@@ -133,7 +134,7 @@ if(__name__ == "__main__"):
     parser.add_argument("signee", help=".bin file to add signature", nargs='?', default=None)
     parser.add_argument("signed", help="signed output .bin", nargs='?', default=None)
 
-    parser.add_argument("--key", help="key.json file", default="Tools/test_keys.json")
+    parser.add_argument("--key", help="key.json file", default="Tools/test_keys/test_keys.json")
     parser.add_argument("--rdct", help="binary R&D certificate file", default=None)
     parser.add_argument("--genkey", help="new generated key", default=None)
     args = parser.parse_args()
@@ -152,7 +153,7 @@ if(__name__ == "__main__"):
         sys.exit(1)
 
     # Issue a warning when signing with testing key
-    if args.key=='Tools/test_keys.json':
+    if args.key=='Tools/test_keys/test_keys.json':
         print("WARNING: Signing with PX4 test key")
 
     # Sign the binary

Tools/docker_run.sh

@@ -4,7 +4,7 @@ if [ -z ${PX4_DOCKER_REPO+x} ]; then
 	echo "guessing PX4_DOCKER_REPO based on input";
 	if [[ $@ =~ .*px4_fmu.* ]]; then
 		# nuttx-px4fmu-v{1,2,3,4,5}
-		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-02-04"
+		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-04-29"
 	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
 		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default
 		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2021-02-04"
@@ -30,7 +30,7 @@ fi
 
 # otherwise default to nuttx
 if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2020-09-14"
+	PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-04-29"
 fi
 
 # docker hygiene

Tools/gazebo_sitl_multiple_run.sh

@@ -20,7 +20,7 @@ function spawn_model() {
 	X=${X:=0.0}
 	Y=${Y:=$((3*${N}))}
 
-	SUPPORTED_MODELS=("iris" "iris_rtps" "plane" "standard_vtol" "rover" "r1_rover" "typhoon_h480")
+	SUPPORTED_MODELS=("iris" "plane" "standard_vtol" "rover" "r1_rover" "typhoon_h480")
 	if [[ " ${SUPPORTED_MODELS[*]} " != *"$MODEL"* ]];
 	then
 		echo "ERROR: Currently only vehicle model $MODEL is not supported!"

Tools/mavlink_shell.py

@@ -12,6 +12,7 @@ import sys, select
 import termios
 from timeit import default_timer as timer
 from argparse import ArgumentParser
+import os
 
 try:
     from pymavlink import mavutil
@@ -135,15 +136,20 @@ def main():
 
     mav_serialport.write('\n') # make sure the shell is started
 
-    # setup the console, so we can read one char at a time
+    # disable echo & avoid buffering on stdin
     fd_in = sys.stdin.fileno()
-    old_attr = termios.tcgetattr(fd_in)
-    new_attr = termios.tcgetattr(fd_in)
-    new_attr[3] = new_attr[3] & ~termios.ECHO # lflags
-    new_attr[3] = new_attr[3] & ~termios.ICANON
+    try:
+        old_attr = termios.tcgetattr(fd_in)
+        new_attr = termios.tcgetattr(fd_in)
+        new_attr[3] = new_attr[3] & ~termios.ECHO # lflags
+        new_attr[3] = new_attr[3] & ~termios.ICANON
+        termios.tcsetattr(fd_in, termios.TCSANOW, new_attr)
+    except termios.error:
+        # tcgetattr can fail if stdin is not a tty
+        old_attr = None
+    ubuf_stdin = os.fdopen(fd_in, 'rb', buffering=0)
 
     try:
-        termios.tcsetattr(fd_in, termios.TCSANOW, new_attr)
         cur_line = ''
         command_history = []
         cur_history_index = 0
@@ -156,11 +162,19 @@ def main():
 
         next_heartbeat_time = timer()
 
-        while True:
+        quit_time = None
+        while quit_time is None or quit_time > timer():
             while True:
-                i, o, e = select.select([sys.stdin], [], [], 0)
+                i, o, e = select.select([ubuf_stdin], [], [], 0)
                 if not i: break
-                ch = sys.stdin.read(1)
+                ch = ubuf_stdin.read(1).decode('utf8')
+
+                if len(ch) == 0: # EOF
+                    if quit_time is None:
+                        # run a bit longer to read the response (we could also
+                        # read until we get a prompt)
+                        quit_time = timer() + 1
+                    break
 
                 # provide a simple shell with command history
                 if ch == '\n':
@@ -182,8 +196,8 @@ def main():
                         cur_line = cur_line[:-1]
                         sys.stdout.write(ch)
                 elif ord(ch) == 27:
-                    ch = sys.stdin.read(1) # skip one
-                    ch = sys.stdin.read(1)
+                    ch = ubuf_stdin.read(1).decode('utf8') # skip one
+                    ch = ubuf_stdin.read(1).decode('utf8')
                     if ch == 'A': # arrow up
                         if cur_history_index > 0:
                             cur_history_index -= 1
@@ -223,7 +237,8 @@ def main():
         mav_serialport.close()
 
     finally:
-        termios.tcsetattr(fd_in, termios.TCSADRAIN, old_attr)
+        if old_attr:
+            termios.tcsetattr(fd_in, termios.TCSADRAIN, old_attr)
 
 
 if __name__ == '__main__':

Tools/process_sensor_caldata.py

@@ -1,4 +1,4 @@
-#! /usr/bin/env python
+#! /usr/bin/env python3
 
 from __future__ import print_function
 
@@ -7,6 +7,7 @@ import os
 import math
 import matplotlib.pyplot as plt
 import numpy as np
+import scipy as sp
 
 from pyulog import *
 
@@ -63,6 +64,9 @@ def resampleWithDeltaX(x,y):
 
     return resampledX,resampledY
 
+def median_filter(data):
+    return sp.signal.medfilt(data, 31)
+
 parser = argparse.ArgumentParser(description='Reads in IMU data from a static thermal calibration test and performs a curve fit of gyro, accel and baro bias vs temperature')
 parser.add_argument('filename', metavar='file.ulg', help='ULog input file')
 parser.add_argument('--no_resample', dest='noResample', action='store_const',
@@ -184,12 +188,16 @@ if num_gyros >= 1 and not math.isnan(sensor_gyro_0['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_0_params['TC_G0_TMIN']-gyro_0_params['TC_G0_TREF'], gyro_0_params['TC_G0_TMAX']-gyro_0_params['TC_G0_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_0_params['TC_G0_TREF']
 
+    sensor_gyro_0['x'] = median_filter(sensor_gyro_0['x'])
+    sensor_gyro_0['y'] = median_filter(sensor_gyro_0['y'])
+    sensor_gyro_0['z'] = median_filter(sensor_gyro_0['z'])
+
     # fit X axis
     if noResample:
-        coef_gyro_0_x = np.polyfit(temp_rel,sensor_gyro_0['x'],3)
+        coef_gyro_0_x = np.polyfit(temp_rel, sensor_gyro_0['x'], 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_0['x'])
-        coef_gyro_0_x = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, sensor_gyro_0['x'])
+        coef_gyro_0_x = np.polyfit(temp, sens, 3)
 
     gyro_0_params['TC_G0_X3_0'] = coef_gyro_0_x[0]
     gyro_0_params['TC_G0_X2_0'] = coef_gyro_0_x[1]
@@ -200,10 +208,10 @@ if num_gyros >= 1 and not math.isnan(sensor_gyro_0['temperature'][0]):
 
     # fit Y axis
     if noResample:
-        coef_gyro_0_y = np.polyfit(temp_rel,sensor_gyro_0['y'],3)
+        coef_gyro_0_y = np.polyfit(temp_rel, sensor_gyro_0['y'], 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_0['y'])
-        coef_gyro_0_y = np.polyfit(temp, sens ,3)
+        coef_gyro_0_y = np.polyfit(temp, sens, 3)
 
     gyro_0_params['TC_G0_X3_1'] = coef_gyro_0_y[0]
     gyro_0_params['TC_G0_X2_1'] = coef_gyro_0_y[1]
@@ -214,9 +222,9 @@ if num_gyros >= 1 and not math.isnan(sensor_gyro_0['temperature'][0]):
 
     # fit Z axis
     if noResample:
-        coef_gyro_0_z = np.polyfit(temp_rel,sensor_gyro_0['z'],3)
+        coef_gyro_0_z = np.polyfit(temp_rel, sensor_gyro_0['z'],3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_0['z'])
+        temp, sens = resampleWithDeltaX(temp_rel, sensor_gyro_0['z'])
         coef_gyro_0_z = np.polyfit(temp, sens ,3)
 
     gyro_0_params['TC_G0_X3_2'] = coef_gyro_0_z[0]
@@ -292,6 +300,10 @@ if num_gyros >= 2 and not math.isnan(sensor_gyro_1['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_1_params['TC_G1_TMIN']-gyro_1_params['TC_G1_TREF'], gyro_1_params['TC_G1_TMAX']-gyro_1_params['TC_G1_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_1_params['TC_G1_TREF']
 
+    sensor_gyro_1['x'] = median_filter(sensor_gyro_1['x'])
+    sensor_gyro_1['y'] = median_filter(sensor_gyro_1['y'])
+    sensor_gyro_1['z'] = median_filter(sensor_gyro_1['z'])
+
     # fit X axis
     if noResample:
         coef_gyro_1_x = np.polyfit(temp_rel,sensor_gyro_1['x'],3)
@@ -400,6 +412,10 @@ if num_gyros >= 3 and not math.isnan(sensor_gyro_2['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_2_params['TC_G2_TMIN']-gyro_2_params['TC_G2_TREF'], gyro_2_params['TC_G2_TMAX']-gyro_2_params['TC_G2_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_2_params['TC_G2_TREF']
 
+    sensor_gyro_2['x'] = median_filter(sensor_gyro_2['x'])
+    sensor_gyro_2['y'] = median_filter(sensor_gyro_2['y'])
+    sensor_gyro_2['z'] = median_filter(sensor_gyro_2['z'])
+
     # fit X axis
     if noResample:
         coef_gyro_2_x = np.polyfit(temp_rel,sensor_gyro_2['x'],3)
@@ -416,10 +432,10 @@ if num_gyros >= 3 and not math.isnan(sensor_gyro_2['temperature'][0]):
 
     # fit Y axis
     if noResample:
-        coef_gyro_2_y = np.polyfit(temp_rel,sensor_gyro_2['y'],3)
+        coef_gyro_2_y = np.polyfit(temp_rel, sensor_gyro_2['y'], 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_2['y'])
-        coef_gyro_2_y = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, sensor_gyro_2['y'])
+        coef_gyro_2_y = np.polyfit(temp, sens, 3)
 
     gyro_2_params['TC_G2_X3_1'] = coef_gyro_2_y[0]
     gyro_2_params['TC_G2_X2_1'] = coef_gyro_2_y[1]
@@ -430,10 +446,10 @@ if num_gyros >= 3 and not math.isnan(sensor_gyro_2['temperature'][0]):
 
     # fit Z axis
     if noResample:
-        coef_gyro_2_z = np.polyfit(temp_rel,sensor_gyro_2['z'],3)
+        coef_gyro_2_z = np.polyfit(temp_rel,sensor_gyro_2['z'], 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_2['z'])
-        coef_gyro_2_z = np.polyfit(temp, sens ,3)
+        coef_gyro_2_z = np.polyfit(temp, sens, 3)
 
     gyro_2_params['TC_G2_X3_2'] = coef_gyro_2_z[0]
     gyro_2_params['TC_G2_X2_2'] = coef_gyro_2_z[1]
@@ -508,8 +524,12 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_3_params['TC_G3_TMIN']-gyro_3_params['TC_G3_TREF'], gyro_3_params['TC_G3_TMAX']-gyro_3_params['TC_G3_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_3_params['TC_G3_TREF']
 
+    sensor_gyro_3['x'] = median_filter(sensor_gyro_3['x'])
+    sensor_gyro_3['y'] = median_filter(sensor_gyro_3['y'])
+    sensor_gyro_3['z'] = median_filter(sensor_gyro_3['z'])
+
     # fit X axis
-    coef_gyro_3_x = np.polyfit(temp_rel,sensor_gyro_3['x'],3)
+    coef_gyro_3_x = np.polyfit(temp_rel,sensor_gyro_3['x'], 3)
     gyro_3_params['TC_G3_X3_0'] = coef_gyro_3_x[0]
     gyro_3_params['TC_G3_X2_0'] = coef_gyro_3_x[1]
     gyro_3_params['TC_G3_X1_0'] = coef_gyro_3_x[2]
@@ -518,7 +538,7 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
     gyro_3_x_resample = fit_coef_gyro_3_x(temp_rel_resample)
 
     # fit Y axis
-    coef_gyro_3_y = np.polyfit(temp_rel,sensor_gyro_3['y'],3)
+    coef_gyro_3_y = np.polyfit(temp_rel,sensor_gyro_3['y'], 3)
     gyro_3_params['TC_G3_X3_1'] = coef_gyro_3_y[0]
     gyro_3_params['TC_G3_X2_1'] = coef_gyro_3_y[1]
     gyro_3_params['TC_G3_X1_1'] = coef_gyro_3_y[2]
@@ -527,7 +547,7 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
     gyro_3_y_resample = fit_coef_gyro_3_y(temp_rel_resample)
 
     # fit Z axis
-    coef_gyro_3_z = np.polyfit(temp_rel,sensor_gyro_3['z'],3)
+    coef_gyro_3_z = np.polyfit(temp_rel,sensor_gyro_3['z'], 3)
     gyro_3_params['TC_G3_X3_2'] = coef_gyro_3_z[0]
     gyro_3_params['TC_G3_X2_2'] = coef_gyro_3_z[1]
     gyro_3_params['TC_G3_X1_2'] = coef_gyro_3_z[2]
@@ -540,8 +560,8 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
 
     # draw plots
     plt.subplot(3,1,1)
-    plt.plot(sensor_gyro_3['temperature'],sensor_gyro_3['x'],'b')
-    plt.plot(temp_resample,gyro_3_x_resample,'r')
+    plt.plot(sensor_gyro_3['temperature'],sensor_gyro_3['x'], 'b')
+    plt.plot(temp_resample,gyro_3_x_resample, 'r')
     plt.title('Gyro 2 ({}) Bias vs Temperature'.format(gyro_3_params['TC_G3_ID']))
     plt.ylabel('X bias (rad/s)')
     plt.xlabel('temperature (degC)')
@@ -601,13 +621,17 @@ if num_accels >= 1 and not math.isnan(sensor_accel_0['temperature'][0]):
     temp_rel_resample = np.linspace(accel_0_params['TC_A0_TMIN']-accel_0_params['TC_A0_TREF'], accel_0_params['TC_A0_TMAX']-accel_0_params['TC_A0_TREF'], 100)
     temp_resample = temp_rel_resample + accel_0_params['TC_A0_TREF']
 
+    sensor_accel_0['x'] = median_filter(sensor_accel_0['x'])
+    sensor_accel_0['y'] = median_filter(sensor_accel_0['y'])
+    sensor_accel_0['z'] = median_filter(sensor_accel_0['z'])
+
     # fit X axis
     correction_x = sensor_accel_0['x'] - np.median(sensor_accel_0['x'])
     if noResample:
-        coef_accel_0_x = np.polyfit(temp_rel,correction_x,3)
+        coef_accel_0_x = np.polyfit(temp_rel,correction_x, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_x)
-        coef_accel_0_x = np.polyfit(temp, sens ,3)
+        coef_accel_0_x = np.polyfit(temp, sens, 3)
 
     accel_0_params['TC_A0_X3_0'] = coef_accel_0_x[0]
     accel_0_params['TC_A0_X2_0'] = coef_accel_0_x[1]
@@ -617,12 +641,12 @@ if num_accels >= 1 and not math.isnan(sensor_accel_0['temperature'][0]):
     correction_x_resample = fit_coef_accel_0_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_0['y']-np.median(sensor_accel_0['y'])
+    correction_y = sensor_accel_0['y'] - np.median(sensor_accel_0['y'])
     if noResample:
-        coef_accel_0_y = np.polyfit(temp_rel,correction_y,3)
+        coef_accel_0_y = np.polyfit(temp_rel, correction_y, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_y)
-        coef_accel_0_y = np.polyfit(temp, sens ,3)
+        coef_accel_0_y = np.polyfit(temp, sens, 3)
 
     accel_0_params['TC_A0_X3_1'] = coef_accel_0_y[0]
     accel_0_params['TC_A0_X2_1'] = coef_accel_0_y[1]
@@ -632,12 +656,12 @@ if num_accels >= 1 and not math.isnan(sensor_accel_0['temperature'][0]):
     correction_y_resample = fit_coef_accel_0_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = sensor_accel_0['z']-np.median(sensor_accel_0['z'])
+    correction_z = sensor_accel_0['z'] - np.median(sensor_accel_0['z'])
     if noResample:
-        coef_accel_0_z = np.polyfit(temp_rel,correction_z,3)
+        coef_accel_0_z = np.polyfit(temp_rel,correction_z, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_z)
-        coef_accel_0_z = np.polyfit(temp, sens ,3)
+        coef_accel_0_z = np.polyfit(temp, sens, 3)
 
     accel_0_params['TC_A0_X3_2'] = coef_accel_0_z[0]
     accel_0_params['TC_A0_X2_2'] = coef_accel_0_z[1]
@@ -712,13 +736,17 @@ if num_accels >= 2 and not math.isnan(sensor_accel_1['temperature'][0]):
     temp_rel_resample = np.linspace(accel_1_params['TC_A1_TMIN']-accel_1_params['TC_A1_TREF'], accel_1_params['TC_A1_TMAX']-accel_1_params['TC_A1_TREF'], 100)
     temp_resample = temp_rel_resample + accel_1_params['TC_A1_TREF']
 
+    sensor_accel_1['x'] = median_filter(sensor_accel_1['x'])
+    sensor_accel_1['y'] = median_filter(sensor_accel_1['y'])
+    sensor_accel_1['z'] = median_filter(sensor_accel_1['z'])
+
     # fit X axis
-    correction_x = sensor_accel_1['x']-np.median(sensor_accel_1['x'])
+    correction_x = sensor_accel_1['x'] - np.median(sensor_accel_1['x'])
     if noResample:
-        coef_accel_1_x = np.polyfit(temp_rel,correction_x,3)
+        coef_accel_1_x = np.polyfit(temp_rel, correction_x, 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,correction_x)
-        coef_accel_1_x = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, correction_x)
+        coef_accel_1_x = np.polyfit(temp, sens, 3)
 
     accel_1_params['TC_A1_X3_0'] = coef_accel_1_x[0]
     accel_1_params['TC_A1_X2_0'] = coef_accel_1_x[1]
@@ -728,7 +756,7 @@ if num_accels >= 2 and not math.isnan(sensor_accel_1['temperature'][0]):
     correction_x_resample = fit_coef_accel_1_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_1['y']-np.median(sensor_accel_1['y'])
+    correction_y = sensor_accel_1['y'] - np.median(sensor_accel_1['y'])
     if noResample:
         coef_accel_1_y = np.polyfit(temp_rel,correction_y,3)
     else:
@@ -743,12 +771,12 @@ if num_accels >= 2 and not math.isnan(sensor_accel_1['temperature'][0]):
     correction_y_resample = fit_coef_accel_1_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = (sensor_accel_1['z'])-np.median(sensor_accel_1['z'])
+    correction_z = sensor_accel_1['z'] - np.median(sensor_accel_1['z'])
     if noResample:
-        coef_accel_1_z = np.polyfit(temp_rel,correction_z,3)
+        coef_accel_1_z = np.polyfit(temp_rel,correction_z, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_z)
-        coef_accel_1_z = np.polyfit(temp, sens ,3)
+        coef_accel_1_z = np.polyfit(temp, sens, 3)
 
     accel_1_params['TC_A1_X3_2'] = coef_accel_1_z[0]
     accel_1_params['TC_A1_X2_2'] = coef_accel_1_z[1]
@@ -824,13 +852,17 @@ if num_accels >= 3 and not math.isnan(sensor_accel_2['temperature'][0]):
     temp_rel_resample = np.linspace(accel_2_params['TC_A2_TMIN']-accel_2_params['TC_A2_TREF'], accel_2_params['TC_A2_TMAX']-accel_2_params['TC_A2_TREF'], 100)
     temp_resample = temp_rel_resample + accel_2_params['TC_A2_TREF']
 
+    sensor_accel_2['x'] = median_filter(sensor_accel_2['x'])
+    sensor_accel_2['y'] = median_filter(sensor_accel_2['y'])
+    sensor_accel_2['z'] = median_filter(sensor_accel_2['z'])
+
     # fit X axis
-    correction_x = sensor_accel_2['x']-np.median(sensor_accel_2['x'])
+    correction_x = sensor_accel_2['x'] - np.median(sensor_accel_2['x'])
     if noResample:
-        coef_accel_2_x = np.polyfit(temp_rel,correction_x,3)
+        coef_accel_2_x = np.polyfit(temp_rel,correction_x, 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,correction_x)
-        coef_accel_2_x = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, correction_x)
+        coef_accel_2_x = np.polyfit(temp, sens, 3)
 
     accel_2_params['TC_A2_X3_0'] = coef_accel_2_x[0]
     accel_2_params['TC_A2_X2_0'] = coef_accel_2_x[1]
@@ -840,7 +872,7 @@ if num_accels >= 3 and not math.isnan(sensor_accel_2['temperature'][0]):
     correction_x_resample = fit_coef_accel_2_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_2['y']-np.median(sensor_accel_2['y'])
+    correction_y = sensor_accel_2['y'] - np.median(sensor_accel_2['y'])
     if noResample:
         coef_accel_2_y = np.polyfit(temp_rel,correction_y,3)
     else:
@@ -855,7 +887,7 @@ if num_accels >= 3 and not math.isnan(sensor_accel_2['temperature'][0]):
     correction_y_resample = fit_coef_accel_2_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = sensor_accel_2['z']-np.median(sensor_accel_2['z'])
+    correction_z = sensor_accel_2['z'] - np.median(sensor_accel_2['z'])
     if noResample:
         coef_accel_2_z = np.polyfit(temp_rel,correction_z,3)
     else:
@@ -935,9 +967,13 @@ if num_accels >= 4 and not math.isnan(sensor_accel_3['temperature'][0]):
     temp_rel_resample = np.linspace(accel_3_params['TC_A3_TMIN']-accel_3_params['TC_A3_TREF'], accel_3_params['TC_A3_TMAX']-accel_3_params['TC_A3_TREF'], 100)
     temp_resample = temp_rel_resample + accel_3_params['TC_A3_TREF']
 
+    sensor_accel_3['x'] = median_filter(sensor_accel_3['x'])
+    sensor_accel_3['y'] = median_filter(sensor_accel_3['y'])
+    sensor_accel_3['z'] = median_filter(sensor_accel_3['z'])
+
     # fit X axis
-    correction_x = sensor_accel_3['x']-np.median(sensor_accel_3['x'])
-    coef_accel_3_x = np.polyfit(temp_rel,correction_x,3)
+    correction_x = sensor_accel_3['x'] - np.median(sensor_accel_3['x'])
+    coef_accel_3_x = np.polyfit(temp_rel, correction_x, 3)
     accel_3_params['TC_A3_X3_0'] = coef_accel_3_x[0]
     accel_3_params['TC_A3_X2_0'] = coef_accel_3_x[1]
     accel_3_params['TC_A3_X1_0'] = coef_accel_3_x[2]
@@ -946,8 +982,8 @@ if num_accels >= 4 and not math.isnan(sensor_accel_3['temperature'][0]):
     correction_x_resample = fit_coef_accel_3_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_3['y']-np.median(sensor_accel_3['y'])
-    coef_accel_3_y = np.polyfit(temp_rel,correction_y,3)
+    correction_y = sensor_accel_3['y'] - np.median(sensor_accel_3['y'])
+    coef_accel_3_y = np.polyfit(temp_rel, correction_y, 3)
     accel_3_params['TC_A3_X3_1'] = coef_accel_3_y[0]
     accel_3_params['TC_A3_X2_1'] = coef_accel_3_y[1]
     accel_3_params['TC_A3_X1_1'] = coef_accel_3_y[2]
@@ -956,8 +992,8 @@ if num_accels >= 4 and not math.isnan(sensor_accel_3['temperature'][0]):
     correction_y_resample = fit_coef_accel_3_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = sensor_accel_3['z']-np.median(sensor_accel_3['z'])
-    coef_accel_3_z = np.polyfit(temp_rel,correction_z,3)
+    correction_z = sensor_accel_3['z'] - np.median(sensor_accel_3['z'])
+    coef_accel_3_z = np.polyfit(temp_rel, correction_z, 3)
     accel_3_params['TC_A3_X3_2'] = coef_accel_3_z[0]
     accel_3_params['TC_A3_X2_2'] = coef_accel_3_z[1]
     accel_3_params['TC_A3_X1_2'] = coef_accel_3_z[2]
@@ -1024,8 +1060,10 @@ temp_rel = sensor_baro_0['temperature'] - baro_0_params['TC_B0_TREF']
 temp_rel_resample = np.linspace(baro_0_params['TC_B0_TMIN']-baro_0_params['TC_B0_TREF'], baro_0_params['TC_B0_TMAX']-baro_0_params['TC_B0_TREF'], 100)
 temp_resample = temp_rel_resample + baro_0_params['TC_B0_TREF']
 
+sensor_baro_0['pressure'] = median_filter(sensor_baro_0['pressure'])
+
 # fit data
-median_pressure = np.median(sensor_baro_0['pressure']);
+median_pressure = np.median(sensor_baro_0['pressure'])
 if noResample:
     coef_baro_0_x = np.polyfit(temp_rel,100*(sensor_baro_0['pressure']-median_pressure),5) # convert from hPa to Pa
 else:
@@ -1081,8 +1119,10 @@ if num_baros >= 2:
     temp_rel_resample = np.linspace(baro_1_params['TC_B1_TMIN']-baro_1_params['TC_B1_TREF'], baro_1_params['TC_B1_TMAX']-baro_1_params['TC_B1_TREF'], 100)
     temp_resample = temp_rel_resample + baro_1_params['TC_B1_TREF']
 
+    sensor_baro_1['pressure'] = median_filter(sensor_baro_1['pressure'])
+
     # fit data
-    median_pressure = np.median(sensor_baro_1['pressure']);
+    median_pressure = np.median(sensor_baro_1['pressure'])
     if noResample:
         coef_baro_1_x = np.polyfit(temp_rel,100*(sensor_baro_1['pressure']-median_pressure),5) # convert from hPa to Pa
     else:
@@ -1139,8 +1179,10 @@ if num_baros >= 3:
     temp_rel_resample = np.linspace(baro_2_params['TC_B2_TMIN']-baro_2_params['TC_B2_TREF'], baro_2_params['TC_B2_TMAX']-baro_2_params['TC_B2_TREF'], 100)
     temp_resample = temp_rel_resample + baro_2_params['TC_B2_TREF']
 
+    sensor_baro_2['pressure'] = median_filter(sensor_baro_2['pressure'])
+
     # fit data
-    median_pressure = np.median(sensor_baro_2['pressure']);
+    median_pressure = np.median(sensor_baro_2['pressure'])
     if noResample:
         coef_baro_2_x = np.polyfit(temp_rel,100*(sensor_baro_2['pressure']-median_pressure),5) # convert from hPa to Pa
     else:
@@ -1197,6 +1239,8 @@ if num_baros >= 4:
     temp_rel_resample = np.linspace(baro_3_params['TC_B3_TMIN']-baro_3_params['TC_B3_TREF'], baro_3_params['TC_B3_TMAX']-baro_3_params['TC_B3_TREF'], 100)
     temp_resample = temp_rel_resample + baro_3_params['TC_B3_TREF']
 
+    sensor_baro_3['pressure'] = median_filter(sensor_baro_3['pressure'])
+
     # fit data
     median_pressure = np.median(sensor_baro_3['pressure'])
     coef_baro_3_x = np.polyfit(temp_rel,100*(sensor_baro_3['pressure']-median_pressure),5) # convert from hPa to Pa

Tools/px4airframes/markdownout.py

@@ -6,7 +6,7 @@ import html
 class MarkdownTablesOutput():
     def __init__(self, groups, board, image_path):
         result = ("# Airframes Reference\n"
-                  "> **Note** **This list is [auto-generated](https://github.com/PX4/Firmware/edit/master/Tools/px4airframes/markdownout.py) from the source code**.\n"
+                  "> **Note** **This list is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/master/Tools/px4airframes/markdownout.py) from the source code**.\n"
                   "> \n"
                   "> **AUX** channels may not be present on some flight controllers.\n"
                   "> If present, PWM AUX channels are commonly labelled **AUX OUT**.\n"

Tools/px4airframes/srcparser.py

@@ -98,6 +98,8 @@ class ParameterGroup(object):
             return "Boat"
         elif (self.name == "Balloon"):
             return "Balloon"
+        elif (self.name == "Vectored 6 DOF UUV"):
+            return "Vectored6DofUUV"
         return "AirframeUnknown"
 
     def GetParams(self):

Tools/px4moduledoc/markdownout.py

@@ -28,7 +28,7 @@ available commands, and in most cases `command help` will print the usage.
 Since this is generated from source, errors must be reported/fixed
 in the [PX4-Autopilot](https://github.com/PX4/PX4-Autopilot) repository.
 The documentation pages can be generated by running the following command from
-the root of the Firmware directory:
+the root of the PX4-Autopilot directory:
 ```
 make module_documentation
 ```
@@ -66,7 +66,7 @@ The generated files will be written to the `modules` directory.
         result = ''
         for module in module_list:
             result += "## %s\n" % module.name()
-            result += "Source: [%s](https://github.com/PX4/Firmware/tree/master/src/%s)\n\n" % (module.scope(), module.scope())
+            result += "Source: [%s](https://github.com/PX4/PX4-Autopilot/tree/master/src/%s)\n\n" % (module.scope(), module.scope())
             doc = module.documentation()
             if len(doc) > 0:
                 result += "%s\n" % doc

Tools/px_uploader.py

@@ -56,7 +56,6 @@ from __future__ import print_function
 import sys
 import argparse
 import binascii
-import serial
 import socket
 import struct
 import json
@@ -68,6 +67,16 @@ import os
 
 from sys import platform as _platform
 
+try:
+    import serial
+except ImportError as e:
+    print("Failed to import serial: " + str(e))
+    print("")
+    print("You may need to install it using:")
+    print("    pip3 install --user pyserial")
+    print("")
+    sys.exit(1)
+
 # Detect python version
 if sys.version_info[0] < 3:
     runningPython3 = False
@@ -726,29 +735,6 @@ def main():
         print("WARNING: You should uninstall ModemManager as it conflicts with any non-modem serial device (like Pixhawk)")
         print("==========================================================================================================")
 
-    # We need to check for pyserial because the import itself doesn't
-    # seem to fail, at least not on macOS.
-    pyserial_installed = False
-    try:
-        if serial.__version__:
-            pyserial_installed = True
-    except:
-        pass
-
-    try:
-        if serial.VERSION:
-            pyserial_installed = True
-    except:
-        pass
-
-    if not pyserial_installed:
-        print("Error: pyserial not installed!")
-        print("")
-        print("You may need to install it using:")
-        print("    pip3 install --user pyserial")
-        print("")
-        sys.exit(1)
-
     # Load the firmware file
     fw = firmware(args.firmware)
 

Tools/serial/generate_config.py

@@ -190,7 +190,6 @@ if rc_serial_output_dir is None and serial_params_output_file is None:
 serial_commands = []
 ethernet_configuration = []
 additional_params = ""
-additional_ethernet_params = ""
 
 if ethernet_supported:
     ethernet_configuration.append({
@@ -211,7 +210,7 @@ def parse_yaml_serial_config(yaml_config):
         ret.append(serial_config)
     return ret
 
-def parse_yaml_parameters_config(yaml_config):
+def parse_yaml_parameters_config(yaml_config, ethernet_supported):
     """ parse the parameters section from the yaml config file """
     if 'parameters' not in yaml_config:
         return ''
@@ -224,79 +223,7 @@ def parse_yaml_parameters_config(yaml_config):
         param_group = parameters_section.get('group', None)
         for param_name in definitions:
             param = definitions[param_name]
-            if 'ethernet' in param:
-                continue
-            num_instances = param.get('num_instances', 1)
-            instance_start = param.get('instance_start', 0) # offset
-
-            # get the type and extract all tags
-            tags = '@group {:}'.format(param_group)
-            if param['type'] == 'enum':
-                param_type = 'INT32'
-                for key in param['values']:
-                    tags += '\n * @value {:} {:}'.format(key, param['values'][key])
-            elif param['type'] == 'boolean':
-                param_type = 'INT32'
-                tags += '\n * @boolean'
-            elif param['type'] == 'int32':
-                param_type = 'INT32'
-            elif param['type'] == 'float':
-                param_type = 'FLOAT'
-            else:
-                raise Exception("unknown param type {:}".format(param['type']))
-
-            for tag in ['decimal', 'increment', 'category', 'volatile', 'bit',
-                        'min', 'max', 'unit', 'reboot_required']:
-                if tag in param:
-                    tags += '\n * @{:} {:}'.format(tag, param[tag])
-
-            for i in range(num_instances):
-                # default value
-                default_value = 0
-                if 'default' in param:
-                    # default can be a list of num_instances or a single value
-                    if type(param['default']) == list:
-                        assert len(param['default']) == num_instances
-                        default_value = param['default'][i]
-                    else:
-                        default_value = param['default']
-
-                if type(default_value) == bool:
-                    default_value = int(default_value)
-
-                # output the existing C-style format
-                ret += '''
-/**
- * {short_descr}
- *
- * {long_descr}
- *
- * {tags}
- */
-PARAM_DEFINE_{param_type}({name}, {default_value});
-'''.format(short_descr=param['description']['short'].replace("\n", "\n * "),
-           long_descr=param['description']['long'].replace("\n", "\n * "),
-           tags=tags,
-           param_type=param_type,
-           name=param_name,
-           default_value=default_value,
-          ).replace('${i}', str(i+instance_start))
-    return ret
-
-def parse_yaml_ethernet_parameters_config(yaml_config):
-    """ parse the parameters section from the yaml config file """
-    if 'parameters' not in yaml_config:
-        return ''
-    parameters_section_list = yaml_config['parameters']
-    for parameters_section in parameters_section_list:
-        if 'definitions' not in parameters_section:
-            return ''
-        definitions = parameters_section['definitions']
-        ret = ''
-        param_group = parameters_section.get('group', None)
-        for param_name in definitions:
-            param = definitions[param_name]
-            if 'ethernet' not in param:
+            if param.get('requires_ethernet', False) and not ethernet_supported:
                 continue
             num_instances = param.get('num_instances', 1)
             instance_start = param.get('instance_start', 0) # offset
@@ -362,9 +289,8 @@ for yaml_file in args.config_files:
             serial_commands.extend(parse_yaml_serial_config(yaml_config))
 
             # TODO: additional params should be parsed in a separate script
-            additional_params += parse_yaml_parameters_config(yaml_config)
-            if ethernet_supported:
-                additional_ethernet_params += parse_yaml_ethernet_parameters_config(yaml_config)
+            additional_params += parse_yaml_parameters_config(
+                yaml_config, ethernet_supported)
 
         except yaml.YAMLError as exc:
             print(exc)
@@ -429,7 +355,7 @@ for serial_command in serial_commands:
             'default_port': default_port,
             'param_group': port_config['group'],
             'description_extended': port_config.get('description_extended', ''),
-			'ethernet_config': serial_command.get('ethernet', 'none')
+			'supports_networking': serial_command.get('supports_networking', False)
             })
 
 if verbose:
@@ -473,6 +399,5 @@ if serial_params_output_file is not None:
         fid.write(template.render(serial_devices=serial_devices,
             ethernet_configuration=ethernet_configuration,
             commands=commands, serial_ports=serial_ports,
-            additional_definitions=additional_params,
-            additional_ethernet_definitions=additional_ethernet_params))
+            additional_definitions=additional_params))
 

Tools/serial/rc.serial_port.jinja

@@ -17,9 +17,9 @@ if param compare "$PRT" {{ serial_device.index }}; then
 fi
 
 {% endfor %}
+
 {% for config in ethernet_configuration -%}
 if param compare "$PRT" {{ config.index }}; then
 	set SERIAL_DEV ethernet
 fi
-
 {% endfor %}

Tools/serial/serial_params.c.jinja

@@ -58,10 +58,11 @@ PARAM_DEFINE_INT32(SER_{{ serial_device.tag }}_BAUD, {{ serial_device.default_ba
 {%- for serial_device in serial_devices %}
  * @value {{ serial_device.index }} {{ serial_device.label }}
 {%- endfor %}
-{%- if command.ethernet_config != "none" %}
+{%- if command.supports_networking %}
 {%- for config in ethernet_configuration %}
  * @value {{ config.index }} {{ config.label }}
-{%- endfor %}{% endif %}
+{%- endfor %}
+{%- endif %}
  * @group {{ command.param_group }}
  * @reboot_required true
  */
@@ -72,5 +73,3 @@ PARAM_DEFINE_INT32({{ command.port_param_name }}, {{ command.default_port }});
 
 {{ additional_definitions }}
 
-{{ additional_ethernet_definitions }}
-

Tools/setup/arch.sh

@@ -155,8 +155,7 @@ if [[ $INSTALL_SIM == "true" ]]; then
 			# fix VMWare 3D graphics acceleration for gazebo
 			exportline="export SVGA_VGPU10=0"
 
-			if grep -Fxq "$exportline" $HOME/.profile; then
-			else
+			if !grep -Fxq "$exportline" $HOME/.profile; then
 				echo $exportline >> $HOME/.profile;
 			fi
 		fi

Tools/setup/macos.sh

@@ -45,7 +45,7 @@ fi
 
 # Python dependencies
 echo "Installing PX4 Python3 dependencies"
-pip3 install --user -r ${DIR}/requirements.txt
+python3 -m pip install --user -r ${DIR}/requirements.txt
 
 # Optional, but recommended additional simulation tools:
 if [[ $INSTALL_SIM == "--sim-tools" ]]; then

Tools/setup/requirements.txt

@@ -6,7 +6,7 @@ empy>=3.3
 jinja2>=2.8
 matplotlib>=3.0.*
 numpy>=1.13
-nunavut
+nunavut>=1.1.0
 packaging
 pandas>=0.21
 pkgconfig
@@ -15,7 +15,7 @@ pygments
 wheel>=0.31.1
 pymavlink
 pyros-genmsg
-pyserial>=3.0
+pyserial
 pyulog>=0.5.0
 pyyaml
 requests

Tools/setup/ubuntu.sh

@@ -115,18 +115,32 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 	echo "Installing NuttX dependencies"
 
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		autoconf \
 		automake \
+		binutils-dev \
 		bison \
-		bzip2 \
-		file \
+		build-essential \
 		flex \
+		g++-multilib \
+		gcc-multilib \
 		gdb-multiarch \
+		genromfs \
+		gettext \
 		gperf \
-		libncurses-dev \
+		kconfig-frontends \
+		libelf-dev \
+		libexpat-dev \
+		libgmp-dev \
+		libisl-dev \
+		libmpc-dev \
+		libmpfr-dev \
+		libncurses5-dev \
+		libncursesw5-dev \
 		libtool \
 		pkg-config \
 		screen \
+		texinfo \
+		u-boot-tools \
+		util-linux \
 		vim-common \
 		;
 

Tools/test_keys/key0.pub

@@ -0,0 +1,5 @@
+//Public key to verify signed binaries
+0x4d, 0xb0, 0xc2, 0x1, 0x5, 0x55, 0x2a, 0x3c, 
+0xd7, 0xfb, 0xaf, 0x5c, 0xba, 0x7a, 0xb0, 0x81, 
+0x1b, 0x36, 0x63, 0xdb, 0x28, 0x52, 0x5e, 0xdb, 
+0x14, 0x36, 0xf2, 0x57, 0x8d, 0x2, 0xb7, 0xfd,