WIP: in tree Dockerfile and github actions push to github registry

- ecl in PX4/Firmware (a300d32523e24df3f366a0d564b764261e1c1909): https://github.com/PX4/PX4-ECL/commit/a7b8afe420f438554ad90bcba0f1f4872325e75b
    - ecl current upstream: https://github.com/PX4/PX4-ECL/commit/29243ac5cbb5d27ac71744e88afcd786df6f748d
    - Changes: https://github.com/PX4/PX4-ECL/compare/a7b8afe420f438554ad90bcba0f1f4872325e75b...29243ac5cbb5d27ac71744e88afcd786df6f748d

    29243ac 2021-05-05 bresch - yaw_reset: reduce minimum vector length to compute yaw error
aad4840 2021-05-02 Kabir Mohammed - EKF: increase allowed difference between flow and gyro ODRs

.ci/Jenkinsfile-compile

@@ -9,10 +9,10 @@ pipeline {
         script {
           def build_nodes = [:]
           def docker_images = [
-            armhf: "px4io/px4-dev-armhf:2021-02-04",
-            arm64: "px4io/px4-dev-aarch64:2021-02-04",
-            base: "px4io/px4-dev-base-bionic:2021-02-04",
-            nuttx: "px4io/px4-dev-nuttx-focal:2021-02-04",
+            armhf: "px4io/px4-dev-armhf:2021-04-29",
+            arm64: "px4io/px4-dev-aarch64:2021-04-29",
+            base: "px4io/px4-dev-base-bionic:2021-04-29",
+            nuttx: "px4io/px4-dev-nuttx-focal:2021-04-29",
             snapdragon: "lorenzmeier/px4-dev-snapdragon:2020-04-01"
           ]
 
@@ -46,9 +46,7 @@ pipeline {
                      "cuav_can-gps-v1_default",
                      "cuav_nora_default",
                      "cuav_x7pro_default",
-                     "cubepilot_cubeorange_console",
                      "cubepilot_cubeorange_default",
-                     "cubepilot_cubeyellow_console",
                      "cubepilot_cubeyellow_default",
                      "holybro_can-gps-v1_canbootloader",
                      "holybro_can-gps-v1_default",
@@ -56,6 +54,7 @@ pipeline {
                      "holybro_kakutef7_default",
                      "holybro_pix32v5_default",
                      "modalai_fc-v1_default",
+                     "modalai_fc-v1_rtps",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
                      "mro_ctrl-zero-h7_default",
@@ -71,12 +70,12 @@ pipeline {
                      "nxp_fmuk66-v3_socketcan",
                      "nxp_fmurt1062-v1_default",
                      "nxp_ucans32k146_default",
+                     "nxp_ucans32k146_canbootloader",
                      "omnibus_f4sd_default",
                      "px4_fmu-v2_default",
                      "px4_fmu-v2_fixedwing",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
-                     "px4_fmu-v2_test",
                      "px4_fmu-v3_default",
                      "px4_fmu-v4_cannode",
                      "px4_fmu-v4_default",
@@ -131,7 +130,7 @@ pipeline {
     // TODO: actually upload artifacts to S3
     // stage('S3 Upload') {
     //   agent {
-    //     docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+    //     docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
     //   }
     //   options {
     //         skipDefaultCheckout()

.ci/Jenkinsfile-hardware

@@ -7,12 +7,12 @@ pipeline {
 
       parallel {
 
-        stage("cubepilot_cubeorange_console") {
+        stage("cubepilot_cubeorange_test") {
           stages {
-            stage("build cubepilot_cubeorange_console") {
+            stage("build cubepilot_cubeorange_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -22,10 +22,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make cubepilot_cubeorange_console'
+                sh 'make cubepilot_cubeorange_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_console'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
               }
               post {
                 always {
@@ -42,9 +42,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'cubepilot_cubeorange_console'
+                    unstash 'cubepilot_cubeorange_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_console/cubepilot_cubeorange_console.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -52,12 +52,12 @@ pipeline {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/cubepilot_io-v2_default.bin" || true' // force px4io update
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -84,12 +84,12 @@ pipeline {
           }
         }
 
-        stage("cuav_x7pro_default") {
+        stage("cuav_x7pro_test") {
           stages {
-            stage("build cuav_x7pro_default") {
+            stage("build cuav_x7pro_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -99,10 +99,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make cuav_x7pro_default'
+                sh 'make cuav_x7pro_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_test'
               }
               post {
                 always {
@@ -119,21 +119,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'cuav_x7pro_default'
+                    unstash 'cuav_x7pro_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_default/cuav_x7pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -160,64 +160,12 @@ pipeline {
           }
         }
 
-        // stage("px4_fmu-v2_test") {
-        //   stages {
-        //     stage("build px4_fmu-v2_test") {
-        //       agent {
-        //         docker {
-        //           image 'px4io/px4-dev-nuttx-focal:2020-09-14'
-        //           args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-        //         }
-        //       }
-        //       steps {
-        //         sh 'export'
-        //         sh 'make distclean'
-        //         sh 'ccache -s'
-        //         sh 'git fetch --tags'
-        //         sh 'make px4_fmu-v2_test'
-        //         sh 'make sizes'
-        //         sh 'ccache -s'
-        //         stash includes: 'build/px4_fmu-v2_test/px4_fmu-v2_test.elf', name: 'px4_fmu-v2_test'
-        //       }
-        //       post {
-        //         always {
-        //             sh 'make distclean'
-        //         }
-        //       }
-        //     } // stage build
-        //     stage("test") {
-        //       agent {
-        //         label 'px4_fmu-v2'
-        //       }
-        //       stages {
-        //         stage("flash") {
-        //           steps {
-        //             sh 'export'
-        //             sh 'find /dev/serial'
-        //             unstash 'px4_fmu-v2_test'
-        //             // flash board and watch bootup
-        //             sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v2_test/px4_fmu-v2_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-        //           }
-        //         }
-        //         stage("reset") {
-        //           steps {
-        //             cleanupFTDI();
-        //           }
-        //         }
-        //       }
-        //       options {
-        //         timeout(time: 90, unit: 'MINUTES')
-        //       }
-        //     }
-        //   }
-        // }
-
-        stage("px4_fmu-v3_default") {
+        stage("px4_fmu-v3_test") {
           stages {
-            stage("build px4_fmu-v3_default") {
+            stage("build px4_fmu-v3_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -227,10 +175,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v3_default'
+                sh 'make px4_fmu-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
               }
               post {
                 always {
@@ -247,21 +195,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v3_default'
+                    unstash 'px4_fmu-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -288,12 +236,12 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v4_default") {
+        stage("px4_fmu-v4_test") {
           stages {
-            stage("build px4_fmu-v4_default") {
+            stage("build px4_fmu-v4_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -303,10 +251,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4_default'
+                sh 'make px4_fmu-v4_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
               }
               post {
                 always {
@@ -323,20 +271,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4_default'
+                    unstash 'px4_fmu-v4_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_default/px4_fmu-v4_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -363,12 +312,12 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v4pro_default") {
+        stage("px4_fmu-v4pro_test") {
           stages {
-            stage("build px4_fmu-v4pro_default") {
+            stage("build px4_fmu-v4pro_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -378,10 +327,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4pro_default'
+                sh 'make px4_fmu-v4pro_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
               }
               post {
                 always {
@@ -398,21 +347,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4pro_default'
+                    unstash 'px4_fmu-v4pro_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_default/px4_fmu-v4pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -439,12 +388,12 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v5_default") {
+        stage("px4_fmu-v5_test") {
           stages {
-            stage("build px4_fmu-v5_default") {
+            stage("build px4_fmu-v5_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -454,10 +403,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v5_default'
+                sh 'make px4_fmu-v5_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
               }
               post {
                 always {
@@ -474,21 +423,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_default'
+                    unstash 'px4_fmu-v5_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -520,7 +469,7 @@ pipeline {
             stage("build px4_fmu-v5_debug") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -561,13 +510,14 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'   // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -599,7 +549,7 @@ pipeline {
             stage("build px4_fmu-v5_optimized") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -637,12 +587,13 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -674,7 +625,7 @@ pipeline {
             stage("build px4_fmu-v5_stackcheck") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -715,13 +666,14 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'   // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'        // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -748,12 +700,12 @@ pipeline {
           }
         }
 
-        stage("modalai_fc-v1_default") {
+        stage("modalai_fc-v1_test") {
           stages {
-            stage("build modalai_fc-v1_default") {
+            stage("build modalai_fc-v1_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -763,10 +715,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make modalai_fc-v1_default'
+                sh 'make modalai_fc-v1_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_test'
               }
               post {
                 always {
@@ -783,20 +735,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'modalai_fc-v1_default'
+                    unstash 'modalai_fc-v1_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_default/modalai_fc-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_test/modalai_fc-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic vtol standardulticopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -823,12 +776,12 @@ pipeline {
           }
         }
 
-        stage("holybro_durandal-v1_default") {
+        stage("holybro_durandal-v1_test") {
           stages {
-            stage("build holybro_durandal-v1_default") {
+            stage("build holybro_durandal-v1_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -838,10 +791,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make holybro_durandal-v1_default'
+                sh 'make holybro_durandal-v1_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'holybro_durandal-v1_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'holybro_durandal-v1_test'
               }
               post {
                 always {
@@ -858,24 +811,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'holybro_durandal-v1_default'
+                    unstash 'holybro_durandal-v1_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_default/holybro_durandal-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_test/holybro_durandal-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set DSHOT_CONFIG 600"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 4000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_USE_IO 0"'          // for dshot
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -903,12 +853,12 @@ pipeline {
           }
         }
 
-        stage("nxp_fmuk66-v3_default") {
+        stage("nxp_fmuk66-v3_test") {
           stages {
-            stage("build nxp_fmuk66-v3_default") {
+            stage("build nxp_fmuk66-v3_test") {
               agent {
                 docker {
-                  image 'px4io/px4-dev-nuttx-focal:2020-09-14'
+                  image 'px4io/px4-dev-nuttx-focal:2021-04-29'
                   args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
                 }
               }
@@ -918,10 +868,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make nxp_fmuk66-v3_default'
+                sh 'make nxp_fmuk66-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
               }
               post {
                 always {
@@ -938,20 +888,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'nxp_fmuk66-v3_default'
+                    unstash 'nxp_fmuk66-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_default/nxp_fmuk66-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -1009,6 +960,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dmesg"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status; param show CAL_GYRO*"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener adc_report"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload"'
@@ -1026,6 +978,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gps"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag"'
@@ -1037,6 +990,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_gps_position"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position"'
@@ -1071,6 +1025,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status; param show CAL_GYRO*"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
   // stop logger

.devcontainer/devcontainer.json

@@ -2,7 +2,7 @@
 // https://github.com/microsoft/vscode-dev-containers/tree/v0.134.0/containers/cpp
 {
 	"name": "px4-dev-nuttx",
-	"image": "px4io/px4-dev-nuttx-focal:2021-02-04",
+	"image": "px4io/px4-dev-nuttx-focal:2021-04-29",
 
 	"runArgs": [ "--cap-add=SYS_PTRACE", "--security-opt", "seccomp=unconfined" ],
 

.github/workflows/checks.yml

@@ -28,7 +28,7 @@ jobs:
           "parameters_metadata",
         ]
     container:
-      image: px4io/px4-dev-nuttx-focal:2021-02-04
+      image: ghcr.io/px4/px4-dev:2021-05-06
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1

.github/workflows/clang-tidy.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-clang:2021-02-04
+    container: px4io/px4-dev-clang:2021-04-29
     steps:
     - uses: actions/checkout@v1
       with:

.github/workflows/compile_linux.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-armhf:2021-02-04
+    container: px4io/px4-dev-armhf:2021-04-29
     strategy:
       matrix:
         config: [

.github/workflows/compile_linux_arm64.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-aarch64:2021-02-04
+    container: px4io/px4-dev-aarch64:2021-04-29
     strategy:
       matrix:
         config: [

.github/workflows/compile_nuttx.yml

@@ -4,6 +4,7 @@ on:
   push:
     branches:
     - 'master'
+    - 'github-actions'
   pull_request:
     branches:
     - '*'
@@ -11,34 +12,39 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     strategy:
       matrix:
         config: [
           airmind_mindpx-v2_default,
           ark_can-flow_canbootloader,
+          ark_can-flow_debug,
           ark_can-flow_default,
           av_x-v1_default,
           bitcraze_crazyflie21_default,
           bitcraze_crazyflie_default,
           cuav_can-gps-v1_canbootloader,
+          cuav_can-gps-v1_debug,
           cuav_can-gps-v1_default,
           cuav_nora_default,
           cuav_x7pro_default,
-          cubepilot_cubeorange_console,
           cubepilot_cubeorange_default,
-          cubepilot_cubeyellow_console,
+          cubepilot_cubeorange_test,
           cubepilot_cubeyellow_default,
+          cubepilot_cubeyellow_test,
+          cubepilot_io-v2_default,
           holybro_can-gps-v1_canbootloader,
+          holybro_can-gps-v1_debug,
           holybro_can-gps-v1_default,
           holybro_durandal-v1_default,
           holybro_kakutef7_default,
           holybro_pix32v5_default,
           modalai_fc-v1_default,
-          mro_ctrl-zero-f7_default,
+          modalai_fc-v1_rtps,
           mro_ctrl-zero-f7-oem_default,
-          mro_ctrl-zero-h7_default,
+          mro_ctrl-zero-f7_default,
           mro_ctrl-zero-h7-oem_default,
+          mro_ctrl-zero-h7_default,
           mro_pixracerpro_default,
           mro_x21-777_default,
           mro_x21_default,
@@ -49,24 +55,26 @@ jobs:
           nxp_fmuk66-v3_rtps,
           nxp_fmuk66-v3_socketcan,
           nxp_fmurt1062-v1_default,
+          nxp_ucans32k146_canbootloader,
           nxp_ucans32k146_default,
           omnibus_f4sd_default,
           px4_fmu-v2_default,
           px4_fmu-v2_fixedwing,
           px4_fmu-v2_multicopter,
           px4_fmu-v2_rover,
-          px4_fmu-v2_test,
           px4_fmu-v3_default,
           px4_fmu-v4_cannode,
           px4_fmu-v4_default,
           px4_fmu-v4pro_default,
           px4_fmu-v5_ctrlalloc,
+          px4_fmu-v5_debug,
           px4_fmu-v5_default,
           px4_fmu-v5_fixedwing,
           px4_fmu-v5_multicopter,
           px4_fmu-v5_optimized,
           px4_fmu-v5_rover,
           px4_fmu-v5_rtps,
+          px4_fmu-v5_stackcheck,
           px4_fmu-v5_uavcanv0periph,
           px4_fmu-v5_uavcanv1,
           px4_fmu-v5x_base_phy_DP83848C,
@@ -116,6 +124,8 @@ jobs:
       run: make ${{matrix.config}} bloaty_symbols || true
     - name: make ${{matrix.config}} bloaty_templates
       run: make ${{matrix.config}} bloaty_templates || true
+    - name: make ${{matrix.config}} bloaty_ram
+      run: make ${{matrix.config}} bloaty_ram || true
     - name: make ${{matrix.config}} bloaty_compare_master
       run: make ${{matrix.config}} bloaty_compare_master || true
     - name: ccache post-run

.github/workflows/compile_nuttx_cannode.yml

@@ -11,7 +11,7 @@ on:
 jobs:
   build:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     strategy:
       matrix:
         config: [

.github/workflows/container.yml

@@ -0,0 +1,31 @@
+name: Build and publish Docker image
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'github-actions'
+
+jobs:
+  docker:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Login to GitHub Container Registry
+        uses: docker/login-action@v1
+        with:
+          registry: ghcr.io
+          username: ${{ github.repository_owner }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Build and push
+        uses: docker/build-push-action@v2
+        with:
+          context: .
+          platforms: linux/amd64
+          push: true
+          tags: |
+            px4/px4-dev:latest
+            ghcr.io/px4/px4-dev:latest
+
+      - name: Image digest
+        run: echo ${{ steps.docker_build.outputs.digest }}

.github/workflows/deploy_all.yml

@@ -0,0 +1,77 @@
+name: Deploy metadata for all targets
+
+on:
+  push:
+    branches:
+    - 'master'
+    - 'release/*'
+    - 'pr-metadata-test'
+
+jobs:
+  enumerate_targets:
+    runs-on: ubuntu-latest
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+    - id: set-matrix
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
+  build:
+    runs-on: ubuntu-latest
+    needs: enumerate_targets
+    strategy:
+      matrix: ${{fromJson(needs.enumerate_targets.outputs.matrix)}}
+    container: px4io/px4-dev-${{ matrix.container }}:2021-04-29
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.target}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.target}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.target}}
+      run: make ${{matrix.target}}
+    - name: ccache post-run
+      run: ccache -s
+
+    - name: parameter metadata
+      run: |
+        make ${{matrix.target}} ver_gen
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
+        cd build/${{ matrix.target }}
+        mkdir _metadata || true
+        cp parameters.* _metadata
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
+        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
+

.github/workflows/mavros_avoidance_tests.yml

@@ -1,131 +0,0 @@
-name: MAVROS Avoidance Tests
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    strategy:
-      fail-fast: false
-      matrix:
-        config:
-          - {test_file: "mavros_posix_test_avoidance.test",    vehicle: "iris_obs_avoid", mission: "avoidance",       build_type: "RelWithDebInfo"}
-          - {test_file: "mavros_posix_test_safe_landing.test", vehicle: "iris_obs_avoid", mission: "MC_safe_landing", build_type: "RelWithDebInfo"}
-
-    container:
-      image: px4io/px4-dev-ros-melodic:2021-02-04
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_avoidance_run.sh ${{matrix.config.test_file}} mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}} || true
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v2-preview
-      with:
-        name: coredump
-        path: px4.core
-
-    # - name: ecl EKF analysis
-    #   if: always()
-    #   run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v2
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_avoidance
-        file: coverage/lcov.info

.github/workflows/mavros_mission_tests.yml

@@ -25,7 +25,7 @@ jobs:
           #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
 
     container:
-      image: px4io/px4-dev-ros-melodic:2021-02-04
+      image: px4io/px4-dev-ros-melodic:2021-04-29
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1

.github/workflows/mavros_offboard_tests.yml

@@ -20,7 +20,7 @@ jobs:
           #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
 
     container:
-      image: px4io/px4-dev-ros-melodic:2021-02-04
+      image: px4io/px4-dev-ros-melodic:2021-04-29
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1

.github/workflows/metadata.yml

@@ -4,15 +4,14 @@ on:
   push:
     branches:
     - 'master'
-  pull_request:
-    branches:
-    - '*'
+    - 'release/*'
+    - 'pr-metadata-test'
 
 jobs:
 
   airframe:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     steps:
     - uses: actions/checkout@v1
       with:
@@ -27,7 +26,7 @@ jobs:
 
   module:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     steps:
     - uses: actions/checkout@v1
       with:
@@ -42,7 +41,7 @@ jobs:
 
   parameter:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     steps:
     - uses: actions/checkout@v1
       with:
@@ -51,13 +50,22 @@ jobs:
     - name: parameter metadata
       run: |
         make parameters_metadata
-        cd build/px4_sitl_default/docs
-        ls -ls *
-      # TODO: deploy 'parameters.md, parameters.xml to S3 px4-travis:Firmware/master/
+        ./src/lib/version/get_git_tag_or_branch_version.sh build/px4_sitl_default >> $GITHUB_ENV
+
+    - uses: jakejarvis/s3-sync-action@master
+      with:
+        args: --acl public-read
+      env:
+        AWS_S3_BUCKET: 'px4-travis'
+        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
+        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
+        AWS_REGION: 'us-west-1'
+        SOURCE_DIR: 'build/px4_sitl_default/docs/'
+        DEST_DIR: 'Firmware/${{ env.version }}/_general/'
 
   uorb_graph:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     steps:
     - uses: actions/checkout@v1
       with:
@@ -72,7 +80,7 @@ jobs:
 
   micrortps_agent:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     steps:
     - uses: actions/checkout@v1
       with:
@@ -86,7 +94,7 @@ jobs:
 
   ROS_msgs:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     steps:
     - uses: actions/checkout@v1
       with:
@@ -99,7 +107,7 @@ jobs:
 
   ROS2_bridge:
     runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-02-04
+    container: ghcr.io/px4/px4-dev:2021-05-06
     steps:
     - uses: actions/checkout@v1
       with:

.github/workflows/sitl_tests.yml

@@ -20,7 +20,7 @@ jobs:
           - {latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo", model: "tailsitter"    } # Florida
           - {latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage",       model: "standard_vtol" } # Zurich
     container:
-      image: px4io/px4-dev-simulation-focal:2021-02-04
+      image: px4io/px4-dev-simulation-focal:2021-04-29
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
     - uses: actions/checkout@v1
@@ -28,9 +28,9 @@ jobs:
         token: ${{ secrets.ACCESS_TOKEN }}
 
     - name: Download MAVSDK
-      run: wget https://github.com/mavlink/MAVSDK/releases/download/v0.36.0/mavsdk_0.36.0_ubuntu20.04_amd64.deb
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
     - name: Install MAVSDK
-      run: dpkg -i mavsdk_0.36.0_ubuntu20.04_amd64.deb
+      run: dpkg -i "mavsdk_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp

.gitmodules

@@ -33,7 +33,7 @@
 [submodule "src/modules/micrortps_bridge/micro-CDR"]
 	path = src/modules/micrortps_bridge/micro-CDR
 	url = https://github.com/PX4/Micro-CDR.git
-	branch = px4
+	branch = master
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
@@ -59,7 +59,11 @@
 	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/public_regulated_data_types"]
 	path = src/drivers/uavcannode_gps_demo/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/libcanard"]
 	path = src/drivers/uavcannode_gps_demo/libcanard
-	url = https://github.com/UAVCAN/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
+	url = https://github.com/px4/public_regulated_data_types/
+	branch = legacy

.vscode/cmake-variants.yaml

@@ -96,21 +96,26 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_x7pro_default
-    cubepilot_cubeorange_default:
+    cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
       settings:
-        CONFIG: cubepilot_orange_default
-    cubepilot_cubeyellow_default:
-      short: cubepilot_cubeyellow
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cubepilot_cubeyellow_default
+        CONFIG: cubepilot_orange_test
     emlid_navio2_default:
       short: emlid_navio2
       buildType: MinSizeRel
       settings:
         CONFIG: emlid_navio2_default
+    holybro_can-gps-v1_canbootloader:
+      short: holybro_can-gps-v1_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: holybro_can-gps-v1_canbootloader
+    holybro_can-gps-v1_default:
+      short: holybro_can-gps-v1_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: holybro_can-gps-v1_default
     holybro_durandal-v1_default:
       short: holybro_durandal-v1
       buildType: MinSizeRel

CMakeLists.txt

@@ -113,7 +113,7 @@ include(px4_parse_function_args)
 include(px4_git)
 
 execute_process(
-	COMMAND git describe --always --tags
+	COMMAND git describe --exclude ext/* --always --tags
 	OUTPUT_VARIABLE PX4_GIT_TAG
 	OUTPUT_STRIP_TRAILING_WHITESPACE
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
@@ -185,6 +185,8 @@ if((CMAKE_BUILD_TYPE STREQUAL "Debug") OR (CMAKE_BUILD_TYPE STREQUAL "Coverage")
 	set(MAX_CUSTOM_OPT_LEVEL -O0)
 elseif(CMAKE_BUILD_TYPE MATCHES "Sanitizer")
 	set(MAX_CUSTOM_OPT_LEVEL -O1)
+elseif(CMAKE_BUILD_TYPE MATCHES "Release")
+	set(MAX_CUSTOM_OPT_LEVEL -O3)
 else()
 	if(px4_constrained_flash_build)
 		set(MAX_CUSTOM_OPT_LEVEL -Os)
@@ -454,3 +456,10 @@ add_custom_target(size
 	WORKING_DIRECTORY ${PX4_BINARY_DIR}
 	USES_TERMINAL
 	)
+
+# install python requirements using configured python
+add_custom_target(install_python_requirements
+	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
+	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
+	USES_TERMINAL
+)

Dockerfile

@@ -0,0 +1,29 @@
+#
+# PX4 development environment
+#
+
+FROM ubuntu:20.04
+LABEL maintainer="Daniel Agar <daniel@agar.ca>"
+
+COPY Tools/setup/ubuntu.sh /tmp/ubuntu.sh
+COPY Tools/setup/requirements.txt /tmp/requirements.txt
+RUN DEBIAN_FRONTEND=noninteractive /tmp/ubuntu.sh --no-sim-tools \
+	&& apt-get -y autoremove \
+	&& apt-get clean autoclean \
+	&& rm -rf /var/lib/apt/lists/{apt,dpkg,cache,log} /tmp/* /var/tmp/*
+
+# create user with id 1001 (jenkins docker workflow default)
+RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
+
+ENV CCACHE_UMASK=000
+ENV PATH="/usr/lib/ccache:$PATH"
+
+# SITL UDP PORTS
+EXPOSE 14556/udp
+EXPOSE 14557/udp
+
+# create and start as LOCAL_USER_ID
+COPY Tools/setup/entrypoint.sh /usr/local/bin/entrypoint.sh
+ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
+
+CMD ["/bin/bash"]

Jenkinsfile

@@ -15,7 +15,7 @@ pipeline {
         // stage('Catkin build on ROS workspace') {
         //   agent {
         //     docker {
-        //       image 'px4io/px4-dev-ros-melodic:2021-02-04'
+        //       image 'px4io/px4-dev-ros-melodic:2021-04-29'
         //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
         //     }
         //   }
@@ -56,7 +56,7 @@ pipeline {
         stage('Colcon build on ROS2 workspace') {
           agent {
             docker {
-              image 'px4io/px4-dev-ros2-foxy:2021-02-04'
+              image 'px4io/px4-dev-ros2-foxy:2021-04-29'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
             }
           }
@@ -85,10 +85,11 @@ pipeline {
 
         stage('Airframe') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make airframe_metadata'
             dir('build/px4_sitl_default/docs') {
               archiveArtifacts(artifacts: 'airframes.md, airframes.xml')
@@ -104,14 +105,15 @@ pipeline {
 
         stage('Parameter') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make parameters_metadata'
             dir('build/px4_sitl_default/docs') {
-              archiveArtifacts(artifacts: 'parameters.md, parameters.xml, params.json.xz')
-              stash includes: 'parameters.md, parameters.xml, params.json.xz', name: 'metadata_parameters'
+              archiveArtifacts(artifacts: 'parameters.md, parameters.xml, parameters.json.xz')
+              stash includes: 'parameters.md, parameters.xml, parameters.json.xz', name: 'metadata_parameters'
             }
           }
           post {
@@ -123,10 +125,11 @@ pipeline {
 
         stage('Module') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make module_documentation'
             dir('build/px4_sitl_default/docs') {
               archiveArtifacts(artifacts: 'modules/*.md')
@@ -143,13 +146,14 @@ pipeline {
         stage('uORB graphs') {
           agent {
             docker {
-              image 'px4io/px4-dev-nuttx-focal:2021-02-04'
+              image 'px4io/px4-dev-nuttx-focal:2021-04-29'
               args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
             }
           }
           steps {
             sh 'export'
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make uorb_graphs'
             dir('Tools/uorb_graph') {
               archiveArtifacts(artifacts: 'graph_px4_sitl.json')
@@ -172,7 +176,7 @@ pipeline {
 
         stage('Userguide') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -202,7 +206,7 @@ pipeline {
 
         stage('QGroundControl') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -230,7 +234,7 @@ pipeline {
 
         stage('microRTPS agent') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -260,7 +264,7 @@ pipeline {
 
         stage('PX4 ROS msgs') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -289,7 +293,7 @@ pipeline {
 
         stage('PX4 ROS2 bridge') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -332,7 +336,7 @@ pipeline {
 
         stage('S3') {
           agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-02-04' }
+            docker { image 'ghcr.io/px4/px4-dev:2021-05-06' }
           }
           steps {
             sh('export')
@@ -342,7 +346,7 @@ pipeline {
             withAWS(credentials: 'px4_aws_s3_key', region: 'us-east-1') {
               s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'airframes.xml', path: 'Firmware/master/')
               s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'parameters.xml', path: 'Firmware/master/')
-              s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'params.json.xz', path: 'Firmware/master/')
+              s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'parameters.json.xz', path: 'Firmware/master/')
             }
           }
           when {

Makefile

@@ -303,8 +303,7 @@ check_%:
 	@echo
 
 uorb_graphs:
-	@./Tools/uorb_graph/create_from_startupscript.sh
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib --file Tools/uorb_graph/graph_full
 	@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
 	@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph
@@ -319,7 +318,7 @@ coverity_scan: px4_sitl_default
 .PHONY: parameters_metadata airframe_metadata module_documentation px4_metadata doxygen
 
 parameters_metadata:
-	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters
+	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
 
 airframe_metadata:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_airframes
@@ -470,6 +469,7 @@ validate_module_configs:
 
 clean:
 	@rm -rf "$(SRC_DIR)"/build
+	@git submodule foreach git clean -df
 
 submodulesclean:
 	@git submodule foreach --quiet --recursive git clean -ff -x -d
@@ -487,7 +487,7 @@ gazeboclean:
 
 distclean: gazeboclean
 	@git submodule deinit -f .
-	@git clean -ff -x -d -e ".project" -e ".cproject" -e ".idea" -e ".settings" -e ".vscode"
+	@git clean -ff -x -d -e ".cproject" -e ".idea" -e ".project" -e ".settings" -e ".vscode"
 
 # Help / Error
 # --------------------------------------------------------------------

README.md

@@ -17,7 +17,7 @@ PX4 is highly portable, OS-independent and supports Linux, NuttX and QuRT out of
   * [VTOL](https://docs.px4.io/master/en/frames_vtol/)
   * [Autogyro](https://docs.px4.io/master/en/frames_autogyro/)
   * [Rover](https://docs.px4.io/master/en/frames_rover/)
-  * many more experimental types (Blimps, Boats, Submarines, Autogyros, etc)
+  * many more experimental types (Blimps, Boats, Submarines, High altitude balloons, etc)
 * Releases: [Downloads](https://github.com/PX4/PX4-Autopilot/releases)
 
 
@@ -85,23 +85,24 @@ See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and
 This repository contains code supporting Pixhawk standard boards (best supported, best tested, recommended choice) and proprietary boards.
 
 ### Pixhawk Standard Boards
-  * FMUv2
-    * [Pixhawk](https://docs.px4.io/master/en/flight_controller/pixhawk.html)
-    * [Pixfalcon](https://docs.px4.io/master/en/flight_controller/pixfalcon.html)
-  * FMUv3
+  * FMUv6X and FMUv6U (STM32H7, 2021)
+    * Various vendors will provide FMUv6X and FMUv6U based designs Q3/2021
+  * FMUv5 and FMUv5X (STM32F7, 2019/20)
+    * [Pixhawk 4 (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4.html)
+    * [Pixhawk 4 mini (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4_mini.html)
+    * [CUAV V5+ (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_plus.html)
+    * [CUAV V5 nano (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_nano.html)
+    * [Auterion Skynode (FMUv5X)](https://docs.px4.io/master/en/flight_controller/auterion_skynode.html)
+  * FMUv4 (STM32F4, 2015)
+    * [Pixracer](https://docs.px4.io/master/en/flight_controller/pixracer.html)
+    * [Pixhawk 3 Pro](https://docs.px4.io/master/en/flight_controller/pixhawk3_pro.html)
+  * FMUv3 (STM32F4, 2014)
     * [Pixhawk 2](https://docs.px4.io/master/en/flight_controller/pixhawk-2.html)
     * [Pixhawk Mini](https://docs.px4.io/master/en/flight_controller/pixhawk_mini.html)
     * [CUAV Pixhack v3](https://docs.px4.io/master/en/flight_controller/pixhack_v3.html)
-  * FMUv4 (STM32F4)
-    * [Pixracer](https://docs.px4.io/master/en/flight_controller/pixracer.html)
-    * [Pixhawk 3 Pro](https://docs.px4.io/master/en/flight_controller/pixhawk3_pro.html)
-  * FMUv5 (STM32F7)
-    * [Pixhawk 4](https://docs.px4.io/master/en/flight_controller/pixhawk4.html)
-    * [Pixhawk 4 mini](https://docs.px4.io/master/en/flight_controller/pixhawk4_mini.html)
-    * [CUAV V5+](https://docs.px4.io/master/en/flight_controller/cuav_v5_plus.html)
-    * [CUAV V5 nano](https://docs.px4.io/master/en/flight_controller/cuav_v5_nano.html)
-  * FMUv6X and FMUv6U (STM32H7)
-    * Various vendors will provide FMUv6X and FMUv6U based designs Q2/2021
+  * FMUv2 (STM32F4, 2013)
+    * [Pixhawk](https://docs.px4.io/master/en/flight_controller/pixhawk.html)
+    * [Pixfalcon](https://docs.px4.io/master/en/flight_controller/pixfalcon.html)
 
 ### Manufacturer and Community supported
   * [Holybro Durandal](https://docs.px4.io/master/en/flight_controller/durandal.html)

ROMFS/cannode/init.d/rcS

@@ -76,15 +76,6 @@ unset BOARD_RC_DEFAULTS
 #
 rgbled start -X -q
 rgbled_ncp5623c start -X -q
-rgbled_pwm start
-
-if param greater -s LIGHT_EN_BLINKM 0
-then
-	if blinkm start -X
-	then
-		blinkm systemstate
-	fi
-fi
 
 #
 # board sensors: rc.sensors

ROMFS/px4fmu_common/init.d-posix/CMakeLists.txt

@@ -34,6 +34,9 @@
 add_subdirectory(airframes)
 
 px4_add_romfs_files(
+	px4-rc.params
+	px4-rc.simulator
+	px4-rc.mavlink
 	rc.replay
 	rcS
 )

ROMFS/px4fmu_common/init.d-posix/airframes/10017_iris_ctrlalloc

@@ -10,43 +10,39 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc
 
-if [ $AUTOCNF = yes ]
-then
-	param set MPC_USE_HTE 0
+param set-default MPC_USE_HTE 0
 
-	param set VM_MASS 1.5
-	param set VM_INERTIA_XX 0.03
-	param set VM_INERTIA_YY 0.03
-	param set VM_INERTIA_ZZ 0.05
+param set-default VM_MASS 1.5
+param set-default VM_INERTIA_XX 0.03
+param set-default VM_INERTIA_YY 0.03
+param set-default VM_INERTIA_ZZ 0.05
 
-	param set CA_AIRFRAME 0
-	param set CA_METHOD 1
-	param set CA_ACT0_MIN 0.0
-	param set CA_ACT1_MIN 0.0
-	param set CA_ACT2_MIN 0.0
-	param set CA_ACT3_MIN 0.0
-	param set CA_ACT0_MAX 1.0
-	param set CA_ACT1_MAX 1.0
-	param set CA_ACT2_MAX 1.0
-	param set CA_ACT3_MAX 1.0
+param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
 
-	param set CA_MC_R0_PX 0.1515
-	param set CA_MC_R0_PY 0.245
-	param set CA_MC_R0_CT 6.5
-	param set CA_MC_R0_KM 0.05
-	param set CA_MC_R1_PX -0.1515
-	param set CA_MC_R1_PY -0.1875
-	param set CA_MC_R1_CT 6.5
-	param set CA_MC_R1_KM 0.05
-	param set CA_MC_R2_PX 0.1515
-	param set CA_MC_R2_PY -0.245
-	param set CA_MC_R2_CT 6.5
-	param set CA_MC_R2_KM -0.05
-	param set CA_MC_R3_PX -0.1515
-	param set CA_MC_R3_PY 0.1875
-	param set CA_MC_R3_CT 6.5
-	param set CA_MC_R3_KM -0.05
-
-fi
+param set-default CA_MC_R0_PX 0.1515
+param set-default CA_MC_R0_PY 0.245
+param set-default CA_MC_R0_CT 6.5
+param set-default CA_MC_R0_KM 0.05
+param set-default CA_MC_R1_PX -0.1515
+param set-default CA_MC_R1_PY -0.1875
+param set-default CA_MC_R1_CT 6.5
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.1515
+param set-default CA_MC_R2_PY -0.245
+param set-default CA_MC_R2_CT 6.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.1515
+param set-default CA_MC_R3_PY 0.1875
+param set-default CA_MC_R3_CT 6.5
+param set-default CA_MC_R3_KM -0.05
 
 set MIXER direct

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_RNG_AID 1
-	param set EKF2_RNG_A_HMAX 10
-fi
+param set-default EKF2_RNG_AID 1
+param set-default EKF2_RNG_A_HMAX 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/10020_if750a

@@ -8,15 +8,12 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Multi GPS blending (as the model has 2 GPS's)
-	param set EKF2_GPS_MASK 7 # Uses speed, hpos and vpos accuracy
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_MODE_OUT 2
-	param set MNT_DO_STAB 2
-fi
+# EKF2: Multi GPS blending (as the model has 2 GPS's)
+param set-default SENS_GPS_MASK 7
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_DO_STAB 2
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -7,16 +7,14 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2
-	param set EKF2_AID_MASK 2
-	param set EKF2_EVP_NOISE 0.05
-	param set EKF2_EVA_NOISE 0.05
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
 
-	# LPE: Flow-only mode
-	param set LPE_FUSION 242
-	param set LPE_FAKE_ORIGIN 1
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
 
-	param set MPC_ALT_MODE 2
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -7,12 +7,9 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# enable fusion of landing target velocity
-	param set LTEST_MODE 1
-	param set PLD_HACC_RAD 0.1
-fi
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
 
 # Start up Landing Target Estimator module
 landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1012_iris_rplidar

@@ -7,7 +7,5 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set LPE_FUSION 242
-fi
+param set-default LPE_FUSION 242
+

ROMFS/px4fmu_common/init.d-posix/airframes/1013_iris_vision

@@ -7,15 +7,13 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Vision position and heading
-	param set EKF2_AID_MASK 24
-	param set EKF2_EV_DELAY 5
+# EKF2: Vision position and heading
+param set-default EKF2_AID_MASK 24
+param set-default EKF2_EV_DELAY 5
 
-	# LPE: Vision + baro
-	param set LPE_FUSION 132
+# LPE: Vision + baro
+param set-default LPE_FUSION 132
+
+# AEQ: External heading set to use vision input
+param set-default ATT_EXT_HDG_M 1
 
-	# AEQ: External heading set to use vision input
-	param set ATT_EXT_HDG_M 1
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1014_solo

@@ -7,10 +7,7 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.1
-	param set MC_ROLLRATE_P 0.1
-fi
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_ROLLRATE_P 0.1
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1015_iris_obs_avoid

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set COM_OBS_AVOID 1
-	param set MPC_XY_CRUISE 5.0
-fi
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -7,15 +7,12 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2
-	param set EKF2_AID_MASK 2
-	param set SENS_FLOW_ROT 0
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default SENS_FLOW_ROT 0
 
-	# LPE: Flow-only mode
-	param set LPE_FUSION 242
-	param set LPE_FAKE_ORIGIN 1
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
 
-	param set MPC_ALT_MODE 2
-fi
+param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1018_iris_vision_velocity

@@ -7,9 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Vision velocity and heading
-	param set EKF2_AID_MASK 272
-	param set EKF2_EV_DELAY 5
-fi
+# EKF2: Vision velocity and heading
+param set-default EKF2_AID_MASK 272
+param set-default EKF2_EV_DELAY 5

ROMFS/px4fmu_common/init.d-posix/airframes/1019_iris_dual_gps

@@ -7,8 +7,5 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Multi GPS blending
-	param set EKF2_GPS_MASK 7 # Uses speed, hpos and vpos accuracy
-fi
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1020_uuv_generic

@@ -5,16 +5,13 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
-	#param set CBRK_GPSFAIL 240024
-fi
+#param set CBRK_GPSFAIL 240024
 
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

ROMFS/px4fmu_common/init.d-posix/airframes/1021_uuv_hippocampus

@@ -5,16 +5,13 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
-	#param set CBRK_GPSFAIL 240024
-fi
+#param set CBRK_GPSFAIL 240024
 
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -5,15 +5,11 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
-
-fi
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
 set PWM_OUT 12345678
 set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -5,54 +5,50 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set EKF2_MAG_ACCLIM 0
-	param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
 
-	param set FW_LND_AIRSPD_SC 1
-	param set FW_LND_ANG 8
-	param set FW_THR_LND_MAX 0
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
-	param set FW_L1_PERIOD 12
+param set-default FW_L1_PERIOD 12
 
-	param set FW_MAN_P_MAX 30
+param set-default FW_MAN_P_MAX 30
 
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PR_FF 0.2
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.2
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
 
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
 
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_CRUISE 0.25
 
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 30
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-
-fi
+param set-default RWTO_TKOFF 1
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1031_plane_cam

@@ -5,10 +5,8 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	# Camera trigger interface is MAVLink
-	param set TRIG_INTERFACE 3
-	# Distance trigger mode enabled
-	param set TRIG_MODE 4
-fi
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1032_plane_catapult

@@ -5,8 +5,5 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	param set RWTO_TKOFF 0
+param set-default RWTO_TKOFF 0
 
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1033_plane_lidar

@@ -5,8 +5,5 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_LND_USETER 1
+param set-default FW_LND_USETER 1
 
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1033_rascal

@@ -5,54 +5,55 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	#param set FW_THR_SLEW_MAX 0.3 # fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	#param set RWTO_MAX_THR 0.6		# fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
+param set-default RWTO_TKOFF 1
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set-default RWTO_MAX_THR 0.6
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
-fi
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -5,54 +5,54 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	#param set FW_THR_SLEW_MAX 0.3 # fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	#param set RWTO_MAX_THR 0.6		# fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
+param set-default RWTO_TKOFF 1
 
-fi
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set RWTO_MAX_THR 0.6
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1035_techpod

@@ -5,43 +5,39 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set EKF2_MAG_ACCLIM 0
-	param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
 
-	param set FW_LND_AIRSPD_SC 1
-	param set FW_LND_ANG 8
-	param set FW_THR_LND_MAX 0
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
-	param set FW_L1_PERIOD 15
+param set-default FW_L1_PERIOD 15
 
-	param set FW_P_TC 0.5
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.5
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.7
-	param set FW_RR_FF 0.20
-	param set FW_RR_I 0.02
-	param set FW_RR_P 0.22
+param set-default FW_R_TC 0.7
+param set-default FW_RR_FF 0.20
+param set-default FW_RR_I 0.02
+param set-default FW_RR_P 0.22
 
-	param set FW_L1_PERIOD 12
+param set-default FW_L1_PERIOD 12
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 30
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-
-fi
+param set-default RWTO_TKOFF 1
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -5,52 +5,46 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
-
-fi
+param set-default RWTO_TKOFF 1
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -7,50 +7,46 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.25
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
-	param set MC_YAW_P 1.6
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_FWD_THRUST_EN 4
-	param set VT_F_TRANS_THR 0.75
-	param set VT_MOT_ID 1234
-	param set VT_FW_MOT_OFFID 1234
-	param set VT_B_TRANS_DUR 8
-	param set VT_TYPE 2
-
-fi
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
 
 set MAV_TYPE 22
 

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -7,44 +7,40 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_I 0.2
-	param set FW_PR_P 0.3
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.33
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_I 0.2
+param set-default FW_PR_P 0.3
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.33
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
+param set-default MC_ROLLRATE_P 0.3
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_F_TRANS_DUR 1.5
-	param set VT_F_TRANS_THR 0.7
-	param set VT_TYPE 0
+param set-default VT_F_TRANS_DUR 1.5
+param set-default VT_F_TRANS_THR 0.7
+param set-default VT_TYPE 0
 
-	param set WV_EN 0
-
-fi
+param set-default WV_EN 0
 
 set MAV_TYPE 20
 

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -7,48 +7,44 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.38
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.38
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_YAW_P 1.6
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_B_TRANS_DUR 8
-	param set VT_FWD_THRUST_EN 4
-	param set VT_MOT_ID 1234
-	param set VT_TILT_TRANS 0.6
-	param set VT_TYPE 1
-
-fi
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_MOT_ID 1234
+param set-default VT_TILT_TRANS 0.6
+param set-default VT_TYPE 1
 
 set MAV_TYPE 21
 

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -7,53 +7,50 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.25
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
-	param set MC_YAW_P 1.6
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_FWD_THRUST_EN 4
-	param set VT_F_TRANS_THR 0.75
-	param set VT_MOT_ID 1234
-	param set VT_FW_MOT_OFFID 1234
-	param set VT_B_TRANS_DUR 8
-	param set VT_TYPE 2
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
 
-	param set RC_MAP_AUX1 8
-	param set RC_MAP_AUX2 9
-	param set RC_MAP_AUX3 10
-fi
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
 
 set MAV_TYPE 22
 

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -5,32 +5,28 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_L1_PERIOD 10
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 0.001
-	param set GND_SPEED_I 3
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 4
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_L1_PERIOD 10
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_I 3
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -6,31 +6,27 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 3
-	param set GND_SPEED_I 0.001
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 4
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1062_tf-r1

@@ -10,32 +10,28 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 3
-	param set GND_SPEED_I 0.001
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 15
-	param set GND_SPEED_MAX 25
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 15
+param set-default GND_SPEED_MAX 25
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 3.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 3.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -5,32 +5,28 @@
 
 . ${R}etc/init.d/rc.boat_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_L1_PERIOD 100
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 0.001
-	param set GND_SPEED_I 8
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 2
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 1
-	param set GND_THR_CRUISE 0.85
-	param set GND_THR_MAX 1
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_L1_PERIOD 100
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_I 8
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 2
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 1
+param set-default GND_THR_CRUISE 0.85
+param set-default GND_THR_MAX 1
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 11
 

ROMFS/px4fmu_common/init.d-posix/airframes/17001_tf-g1

@@ -12,52 +12,47 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set ASPD_STALL 10.0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default ASPD_STALL 10.0
 
-	param set FW_P_RMAX_NEG 20.0
-	param set FW_P_RMAX_POS 60.0
-	param set FW_W_RMAX 10
-	param set FW_W_EN 1
+param set-default FW_P_RMAX_NEG 20.0
+param set-default FW_P_RMAX_POS 60.0
+param set-default FW_W_RMAX 10
+param set-default FW_W_EN 1
 
-	param set FW_PR_IMAX 0.4
-	param set FW_R_TC 0.4
-	param set FW_RR_FF 0.5
-	param set FW_RR_I 0.1
-	param set FW_RR_IMAX 0.2
-	param set FW_RR_P 0.08
+param set-default FW_PR_IMAX 0.4
+param set-default FW_R_TC 0.4
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_I 0.1
+param set-default FW_RR_IMAX 0.2
+param set-default FW_RR_P 0.08
 
-	param set MIS_LTRMIN_ALT 50
-	param set MIS_TAKEOFF_ALT 3
+param set-default MIS_LTRMIN_ALT 50
+param set-default MIS_TAKEOFF_ALT 3
 
-	param set NAV_ACC_RAD 20
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 100
+param set-default NAV_ACC_RAD 20
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 100
 
-	param set RWTO_TKOFF 1
+param set-default RWTO_TKOFF 1
 
-	param set FW_ARSP_SCALE_EN 0
+param set-default FW_ARSP_SCALE_EN 0
 
-	param set FW_AIRSPD_MAX 35
-	param set FW_AIRSPD_MIN 7
-	param set FW_AIRSPD_TRIM 15
+param set-default FW_AIRSPD_MAX 35
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 15
 
-	param set FW_P_LIM_MAX 25
-	param set FW_P_LIM_MIN -5
-	param set FW_R_LIM 30
+param set-default FW_P_LIM_MAX 25
+param set-default FW_P_LIM_MIN -5
+param set-default FW_R_LIM 30
 
-	param set FW_MAN_P_MAX 30.0
-	param set FW_MAN_R_MAX 30.0
-
-	param set FW_THR_CRUISE 0.8
-	param set FW_THR_IDLE 0
-	param set COM_DISARM_PRFLT 0
-
-fi
+param set-default FW_MAN_P_MAX 30.0
+param set-default FW_MAN_R_MAX 30.0
 
+param set-default FW_THR_CRUISE 0.8
+param set-default FW_THR_IDLE 0
+param set-default COM_DISARM_PRFLT 0
 
 set MIXER_FILE etc/mixers-sitl/autogyro_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/3011_hexarotor_x

@@ -9,24 +9,21 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.1
-	param set MC_PITCHRATE_I 0.05
-	param set MC_PITCH_P 6.0
-	param set MC_ROLLRATE_P 0.15
-	param set MC_ROLLRATE_I 0.1
-	param set MC_ROLL_P 6.0
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCH_P 6.0
+param set-default MC_ROLLRATE_P 0.15
+param set-default MC_ROLLRATE_I 0.1
+param set-default MC_ROLL_P 6.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
+param set-default RTL_DESCEND_ALT 10
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_DO_STAB 2
-fi
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_DO_STAB 2
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/airframes/6011_typhoon_h480

@@ -7,27 +7,24 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.0800
-	param set MC_PITCHRATE_I 0.0400
-	param set MC_PITCHRATE_D 0.0010
-	param set MC_PITCH_P 9.0
-	param set MC_ROLLRATE_P 0.0800
-	param set MC_ROLLRATE_I 0.0400
-	param set MC_ROLLRATE_D 0.0010
-	param set MC_ROLL_P 9.0
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
+param set-default RTL_DESCEND_ALT 10
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_MODE_OUT 2
-	param set MAV_PROTO_VER 2
-fi
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MAV_PROTO_VER 2
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_ctrlalloc

@@ -8,66 +8,63 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc
 
-if [ $AUTOCNF = yes ]
-then
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
-	param set RTL_LAND_DELAY 0
+param set-default RTL_DESCEND_ALT 10
+param set-default RTL_LAND_DELAY 0
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 0
-	param set MAV_PROTO_VER 2
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 0
+param set-default MAV_PROTO_VER 2
 
-	param set MPC_USE_HTE 0
+param set-default MPC_USE_HTE 0
 
-	param set VM_MASS 2.66
-	param set VM_INERTIA_XX 0.06
-	param set VM_INERTIA_YY 0.06
-	param set VM_INERTIA_ZZ 0.10
+param set-default VM_MASS 2.66
+param set-default VM_INERTIA_XX 0.06
+param set-default VM_INERTIA_YY 0.06
+param set-default VM_INERTIA_ZZ 0.10
 
-	param set CA_AIRFRAME 0
-	param set CA_METHOD 1
-	param set CA_ACT0_MIN 0.0
-	param set CA_ACT1_MIN 0.0
-	param set CA_ACT2_MIN 0.0
-	param set CA_ACT3_MIN 0.0
-	param set CA_ACT4_MIN 0.0
-	param set CA_ACT5_MIN 0.0
-	param set CA_ACT0_MAX 1.0
-	param set CA_ACT1_MAX 1.0
-	param set CA_ACT2_MAX 1.0
-	param set CA_ACT3_MAX 1.0
-	param set CA_ACT4_MAX 1.0
-	param set CA_ACT5_MAX 1.0
+param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT4_MIN 0.0
+param set-default CA_ACT5_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
+param set-default CA_ACT4_MAX 1.0
+param set-default CA_ACT5_MAX 1.0
 
-	param set CA_MC_R0_PX 0.0
-	param set CA_MC_R0_PY 1.0
-	param set CA_MC_R0_CT 9.5
-	param set CA_MC_R0_KM -0.05
-	param set CA_MC_R1_PX 0.0
-	param set CA_MC_R1_PY -1.0
-	param set CA_MC_R1_CT 9.5
-	param set CA_MC_R1_KM 0.05
-	param set CA_MC_R2_PX 0.866025
-	param set CA_MC_R2_PY -0.5
-	param set CA_MC_R2_CT 9.5
-	param set CA_MC_R2_KM -0.05
-	param set CA_MC_R3_PX -0.866025
-	param set CA_MC_R3_PY 0.5
-	param set CA_MC_R3_CT 9.5
-	param set CA_MC_R3_KM 0.05
-	param set CA_MC_R4_PX 0.866025
-	param set CA_MC_R4_PY 0.5
-	param set CA_MC_R4_CT 9.5
-	param set CA_MC_R4_KM 0.05
-	param set CA_MC_R5_PX -0.866025
-	param set CA_MC_R5_PY -0.5
-	param set CA_MC_R5_CT 9.5
-	param set CA_MC_R5_KM -0.05
-fi
+param set-default CA_MC_R0_PX 0.0
+param set-default CA_MC_R0_PY 1.0
+param set-default CA_MC_R0_CT 9.5
+param set-default CA_MC_R0_KM -0.05
+param set-default CA_MC_R1_PX 0.0
+param set-default CA_MC_R1_PY -1.0
+param set-default CA_MC_R1_CT 9.5
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.866025
+param set-default CA_MC_R2_PY -0.5
+param set-default CA_MC_R2_CT 9.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.866025
+param set-default CA_MC_R3_PY 0.5
+param set-default CA_MC_R3_CT 9.5
+param set-default CA_MC_R3_KM 0.05
+param set-default CA_MC_R4_PX 0.866025
+param set-default CA_MC_R4_PY 0.5
+param set-default CA_MC_R4_CT 9.5
+param set-default CA_MC_R4_KM 0.05
+param set-default CA_MC_R5_PX -0.866025
+param set-default CA_MC_R5_PY -0.5
+param set-default CA_MC_R5_CT 9.5
+param set-default CA_MC_R5_KM -0.05
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -0,0 +1,32 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+udp_offboard_port_local=$((14580+px4_instance))
+udp_offboard_port_remote=$((14540+px4_instance))
+[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
+udp_onboard_payload_port_local=$((14280+px4_instance))
+udp_onboard_payload_port_remote=$((14030+px4_instance))
+udp_onboard_gimbal_port_local=$((13030+px4_instance))
+udp_onboard_gimbal_port_remote=$((13280+px4_instance))
+udp_gcs_port_local=$((18570+px4_instance))
+
+# GCS link
+mavlink start -x -u $udp_gcs_port_local -r 4000000 -f
+mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u $udp_gcs_port_local
+mavlink stream -r 50 -s LOCAL_POSITION_NED -u $udp_gcs_port_local
+mavlink stream -r 50 -s GLOBAL_POSITION_INT -u $udp_gcs_port_local
+mavlink stream -r 50 -s ATTITUDE -u $udp_gcs_port_local
+mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_gcs_port_local
+mavlink stream -r 50 -s ATTITUDE_TARGET -u $udp_gcs_port_local
+mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u $udp_gcs_port_local
+mavlink stream -r 20 -s RC_CHANNELS -u $udp_gcs_port_local
+mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local
+
+# API/Offboard link
+mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote
+
+# Onboard link to camera
+mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
+
+# Onboard link to gimbal
+mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote

ROMFS/px4fmu_common/init.d-posix/px4-rc.params

@@ -0,0 +1,5 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+#param set MAV_SYS_ID $((px4_instance+1))
+#param set IMU_INTEG_RATE 250

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -0,0 +1,20 @@
+#!/bin/sh
+# shellcheck disable=SC2154
+
+simulator_tcp_port=$((4560+px4_instance))
+
+# Check if PX4_SIM_HOSTNAME environment variable is empty
+# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
+# If both are empty use localhost for simulator
+if [ -z "${PX4_SIM_HOSTNAME}" ]; then
+  if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
+    echo "PX4 SIM HOST: localhost"
+    simulator start -c $simulator_tcp_port
+  else
+    echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+    simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
+  fi
+else
+  echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+  simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
+fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -5,7 +5,8 @@
 # shellcheck disable=SC1091
 . px4-alias.sh
 
-SCRIPT_DIR="$(CDPATH='' cd -- "$(dirname -- "$0")" && pwd)"
+#search path for sourcing px4-rc.*
+PATH="$PATH:${R}etc/init.d-posix"
 
 #
 # Main SITL startup script
@@ -21,6 +22,7 @@ fi
 
 # initialize script variables
 set AUX_MODE                    none
+set AUX_BANK2			none
 set IO_PRESENT                  no
 set MAV_TYPE                    none
 set MIXER                       none
@@ -44,9 +46,9 @@ else
 	# Find the matching Autostart ID (file name has the form: [0-9]+_${PX4_SIM_MODEL})
 	# TODO: unify with rc.autostart generation
 	# shellcheck disable=SC2012
-	REQUESTED_AUTOSTART=$(ls "$SCRIPT_DIR/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
+	REQUESTED_AUTOSTART=$(ls "${R}etc/init.d-posix/airframes" | sed -n 's/^\([0-9][0-9]*\)_'${PX4_SIM_MODEL}'$/\1/p')
 	if [ -z "$REQUESTED_AUTOSTART" ]; then
-		echo "Error: Unknown model $PX4_SIM_MODEL (not found by name on $SCRIPT_DIR/airframes)"
+		echo "Error: Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
 		echo "Info: found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
@@ -97,21 +99,12 @@ then
 	set AUTOCNF yes
 
 	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
-	param reset_all SYS_AUTOSTART SYS_AUTOCONFIG RC* COM_FLTMODE* LND_FLIGHT_T_* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT_UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi
 
 # multi-instance setup
 # shellcheck disable=SC2154
 param set MAV_SYS_ID $((px4_instance+1))
-simulator_tcp_port=$((4560+px4_instance))
-udp_offboard_port_local=$((14580+px4_instance))
-udp_offboard_port_remote=$((14540+px4_instance))
-[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
-udp_onboard_payload_port_local=$((14280+px4_instance))
-udp_onboard_payload_port_remote=$((14030+px4_instance))
-udp_onboard_gimbal_port_local=$((13030+px4_instance))
-udp_onboard_gimbal_port_remote=$((13280+px4_instance))
-udp_gcs_port_local=$((18570+px4_instance))
 
 if [ $AUTOCNF = yes ]
 then
@@ -153,6 +146,8 @@ param set-default SENS_IMU_MODE 0
 param set-default EKF2_MULTI_MAG 2
 param set-default SENS_MAG_MODE 0
 
+param set-default IMU_GYRO_FFT_EN 1
+
 # By default log from boot until first disarm.
 param set-default SDLOG_MODE 1
 # enable default, estimator replay and vision/avoidance logging profiles
@@ -174,6 +169,10 @@ if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
 	echo "COM_OF_LOSS_T set to $COM_OF_LOSS_T_LONGER"
 	param set COM_OF_LOSS_T $COM_OF_LOSS_T_LONGER
+
+	COM_OBC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 5.0" | bc)
+	echo "COM_OBC_LOSS_T set to $COM_OBC_LOSS_T_LONGER"
+	param set COM_OBC_LOSS_T $COM_OBC_LOSS_T_LONGER
 fi
 
 # Autostart ID
@@ -209,11 +208,14 @@ fi
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250
 
+#user defined params for instances can be in PATH
+. px4-rc.params
+
 dataman start
 # only start the simulator if not in replay mode, as both control the lockstep time
 if ! replay tryapplyparams
 then
-	simulator start -c $simulator_tcp_port
+  . px4-rc.simulator
 fi
 load_mon start
 battery_simulator start
@@ -235,38 +237,24 @@ then
 	camera_feedback start
 fi
 
+if param compare -s IMU_GYRO_FFT_EN 1
+then
+	gyro_fft start
+fi
+
+if param compare -s IMU_GYRO_CAL_EN 1
+then
+	gyro_calibration start
+fi
+
 # Configure vehicle type specific parameters.
 # Note: rc.vehicle_setup is the entry point for rc.interface,
 #       rc.fw_apps, rc.mc_apps, rc.rover_apps, and rc.vtol_apps.
 #
 . ${R}etc/init.d/rc.vehicle_setup
 
-if [ -e etc/init.d-posix/rc.mavlink_override ]
-then
-	echo "Running non-default mavlink config rc.mavlink_override"
-	sh etc/init.d-posix/rc.mavlink_override
-else
-	# GCS link
-	mavlink start -x -u $udp_gcs_port_local -r 4000000 -f -p
-	mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u $udp_gcs_port_local
-	mavlink stream -r 50 -s LOCAL_POSITION_NED -u $udp_gcs_port_local
-	mavlink stream -r 50 -s GLOBAL_POSITION_INT -u $udp_gcs_port_local
-	mavlink stream -r 50 -s ATTITUDE -u $udp_gcs_port_local
-	mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_gcs_port_local
-	mavlink stream -r 50 -s ATTITUDE_TARGET -u $udp_gcs_port_local
-	mavlink stream -r 50 -s SERVO_OUTPUT_RAW_0 -u $udp_gcs_port_local
-	mavlink stream -r 20 -s RC_CHANNELS -u $udp_gcs_port_local
-	mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local
-
-	# API/Offboard link
-	mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote -p
-
-	# Onboard link to camera
-	mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote -p
-
-	# Onboard link to gimbal
-	mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote -p
-fi
+#user defined mavlink streams for instances can be in PATH
+. px4-rc.mavlink
 
 # execute autostart post script if any
 [ -e "$autostart_file".post ] && . "$autostart_file".post

ROMFS/px4fmu_common/init.d/airframes/13010_claire

@@ -14,7 +14,7 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 
-param set-default PWM_AUX_DISARMED 1000
+param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
 param set-default PWM_AUX_MIN 1000
 param set-default PWM_AUX_RATE 50

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -112,7 +112,7 @@ param set-default MPC_YAWRAUTO_MAX 20
 param set-default NAV_DLL_ACT 0
 param set-default NAV_LOITER_RAD 100
 
-param set-default PWM_AUX_DISARMED 950
+param set-default PWM_AUX_DISARM 950
 
 param set-default PWM_MAIN_DIS5 1500
 param set-default PWM_MAIN_DIS6 1500

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -26,48 +26,48 @@
 
 param set-default BAT_N_CELLS 6
 
-param set-default FW_AIRSPD_MAX   30
-param set-default FW_AIRSPD_MIN   19
-param set-default FW_AIRSPD_TRIM  23
+param set-default FW_AIRSPD_MAX 30
+param set-default FW_AIRSPD_MIN 19
+param set-default FW_AIRSPD_TRIM 23
 param set-default FW_L1_R_SLEW_MAX 40
 param set-default FW_LND_EARLYCFG 1
-param set-default FW_MAN_P_MAX	30
-param set-default FW_PR_I	0.1
-param set-default FW_PSP_OFF	3
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_I 0.1
+param set-default FW_PSP_OFF 3
 param set-default FW_P_LIM_MAX 18
 param set-default FW_P_LIM_MIN -25
-param set-default FW_RLL_TO_YAW_FF	0.1
-param set-default FW_RR_I	0.1
-param set-default FW_RR_P	0.08
+param set-default FW_RLL_TO_YAW_FF 0.1
+param set-default FW_RR_I 0.1
+param set-default FW_RR_P 0.08
 param set-default FW_R_LIM 45
-param set-default FW_R_RMAX	50
+param set-default FW_R_RMAX 50
 param set-default FW_THR_CRUISE 0.65
 param set-default FW_THR_MIN 0.3
 param set-default FW_THR_SLEW_MAX 0.6
 param set-default FW_T_HRATE_FF 0
-param set-default FW_T_SINK_MAX	15
-param set-default FW_T_SINK_MIN	3
-param set-default FW_YR_I	0.1
-param set-default FW_YR_P	0.15
+param set-default FW_T_SINK_MAX 15
+param set-default FW_T_SINK_MIN 3
+param set-default FW_YR_I 0.1
+param set-default FW_YR_P 0.15
 
 param set-default IMU_GYRO_CUTOFF 40
 
 param set-default IMU_DGYRO_CUTOFF 15
-param set-default MC_PITCHRATE_I	0.2
+param set-default MC_PITCHRATE_I 0.2
 param set-default MC_PITCHRATE_MAX 60
-param set-default MC_ROLLRATE_I	0.2
+param set-default MC_ROLLRATE_I 0.2
 param set-default MC_ROLLRATE_MAX 60
 param set-default MC_YAWRATE_I 0.15
 param set-default MC_YAWRATE_MAX 40
 param set-default MC_YAWRATE_P 0.3
 
-param set-default MIS_TAKEOFF_ALT	30
+param set-default MIS_TAKEOFF_ALT 30
 
-param set-default MPC_ACC_DOWN_MAX	2
-param set-default MPC_ACC_HOR_MAX	2
-param set-default MPC_ACC_UP_MAX	3
+param set-default MPC_ACC_DOWN_MAX 2
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_ACC_UP_MAX 3
 param set-default MC_AIRMODE 1
-param set-default MPC_JERK_AUTO	4
+param set-default MPC_JERK_AUTO 4
 param set-default MPC_LAND_SPEED 1
 param set-default MPC_MAN_TILT_MAX 25
 param set-default MPC_MAN_Y_MAX 40
@@ -76,7 +76,7 @@ param set-default MPC_SPOOLUP_TIME 1.5
 param set-default MPC_THR_HOVER 0.45
 param set-default MPC_TILTMAX_AIR 25
 param set-default MPC_TKO_RAMP_T 1.8
-param set-default MPC_TKO_SPEED	1
+param set-default MPC_TKO_SPEED 1
 param set-default MPC_VEL_MANUAL 3
 param set-default MPC_XY_CRUISE 3
 param set-default MPC_XY_VEL_MAX 3.5
@@ -84,7 +84,7 @@ param set-default MPC_YAWRAUTO_MAX 40
 param set-default MPC_Z_VEL_MAX_DN 1.5
 param set-default MPC_Z_VEL_MAX_UP 2
 
-param set-default NAV_ACC_RAD	3
+param set-default NAV_ACC_RAD 3
 
 param set-default PWM_MAIN_DIS3 1000
 param set-default PWM_MAIN_MIN3 1120
@@ -111,4 +111,6 @@ set MAV_TYPE 22
 set MIXER babyshark
 set MIXER_AUX pass
 
+# Mark outputs for the alternate rate
+# or D-Shot
 set PWM_OUT 5678

ROMFS/px4fmu_common/init.d/airframes/13015_generic_vtol_standard

@@ -1,57 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Quadplane VTOL (PWM14)
-#
-# @type Standard VTOL
-# @class VTOL
-#
-# @maintainer
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 Aileron 1
-# @output MAIN6 Aileron 2
-# @output MAIN7 Elevator
-# @output MAIN8 Rudder
-# @output MAIN9 Pusher motor
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-
-param set-default PWM_MAIN_RATE 400
-
-param set-default PWM_MAIN_MIN1 1100
-param set-default PWM_MAIN_MIN2 1100
-param set-default PWM_MAIN_MIN3 1100
-param set-default PWM_MAIN_MIN4 1100
-
-param set-default PWM_MAIN_MAX1 1900
-param set-default PWM_MAIN_MAX2 1900
-param set-default PWM_MAIN_MAX3 1900
-param set-default PWM_MAIN_MAX4 1900
-
-param set-default PWM_MAIN_DIS1 900
-param set-default PWM_MAIN_DIS2 900
-param set-default PWM_MAIN_DIS3 900
-param set-default PWM_MAIN_DIS4 900
-param set-default PWM_MAIN_DIS5 1500
-param set-default PWM_MAIN_DIS6 1500
-param set-default PWM_MAIN_DIS7 1500
-param set-default PWM_MAIN_DIS8 1500
-param set-default PWM_MAIN_DIS9 900
-
-param set-default VT_TYPE 2
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 1234
-set MAV_TYPE 22
-
-set MIXER quad_x_vtol_AAERT
-set MIXER_AUX none
-
-set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13030_generic_vtol_quad_tiltrotor

@@ -0,0 +1,41 @@
+#!/bin/sh
+#
+# @name Generic Quadplane VTOL Tiltrotor
+#
+# @type VTOL Tiltrotor
+# @class VTOL
+#
+# @maintainer
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output AUX1 Motor tilt front left
+# @output AUX2 Motor tilt front right
+# @output AUX3 Motor tilt rear left
+# @output AUX4 Motor tilt rear right
+# @output AUX5 Aileron left
+# @output AUX6 Aileron right
+# @output AUX7 Elevator
+# @output AUX8 Rudder
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+
+param set-default PWM_MAIN_RATE 400
+
+param set-default VT_IDLE_PWM_MC 1100
+param set-default VT_TYPE 1
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 24
+set MAV_TYPE 21
+
+set MIXER quad_x
+set MIXER_AUX vtol_TTTTAAER
+
+set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/24001_dodeca_cox

@@ -31,7 +31,7 @@ set VEHICLE_TYPE mc
 param set-default NAV_ACC_RAD 2
 
 param set-default PWM_AUX_RATE 400
-param set-default PWM_AUX_DISARMED 900
+param set-default PWM_AUX_DISARM 900
 param set-default PWM_AUX_MIN 1075
 param set-default PWM_AUX_MAX 1950
 

ROMFS/px4fmu_common/init.d/airframes/4040_reaper

@@ -33,7 +33,7 @@ param set-default MC_YAW_P 4
 
 param set-default NAV_ACC_RAD 2
 
-param set-default PWM_AUX_DISARMED 950
+param set-default PWM_AUX_DISARM 950
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_MIN 1100
 param set-default PWM_MAIN_MAX 1900

ROMFS/px4fmu_common/init.d/airframes/4053_holybro_kopis2

@@ -16,8 +16,6 @@
 set MIXER quad_x
 set PWM_OUT 1234
 
-set PARAM_DEFAULTS_VER 2
-
 
 param set-default BAT_N_CELLS 4
 

ROMFS/px4fmu_common/init.d/airframes/4071_ifo

@@ -18,6 +18,7 @@
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
 # @board bitcraze_crazyflie exclude
+# @board cuav_x7pro exclude
 #
 
 set VEHICLE_TYPE mc
@@ -111,10 +112,12 @@ param set-default NAV_RCL_ACT 6
 # TELEM1 ttyS1 - Wifi module
 param set-default MAV_0_CONFIG 101
 param set-default MAV_0_RATE 0
-param set-default MAV_0_MODE 2	# onboard
+# onboard
+param set-default MAV_0_MODE 2
 param set-default SER_TEL1_BAUD 921600
 
 # TELEM2 ttyS2 - Sub 1-Ghz
 param set-default MAV_1_CONFIG 102
-param set-default MAV_1_MODE 0	# normal
+# normal
+param set-default MAV_1_MODE 0
 param set-default SER_TEL2_BAUD 57600

ROMFS/px4fmu_common/init.d/airframes/4073_ifo-s

@@ -15,6 +15,8 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board bitcraze_crazyflie exclude
+# @board cuav_x7pro exclude
 #
 # @maintainer Hyon Lim <lim@uvify.com>
 #
@@ -119,12 +121,14 @@ param set-default NAV_RCL_ACT 6
 # TELEM1 ttyS1 - Wifi module
 param set-default MAV_0_CONFIG 101
 param set-default MAV_0_RATE 0
-param set-default MAV_0_MODE 2	# onboard
+# onboard
+param set-default MAV_0_MODE 2
 param set-default SER_TEL1_BAUD 921600
 
 # TELEM2 ttyS2 - Sub 1-Ghz
 param set-default MAV_1_CONFIG 102
-param set-default MAV_1_MODE 0	# normal
+# normal
+param set-default MAV_1_MODE 0
 param set-default SER_TEL2_BAUD 57600
 
 # DSHOT

ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover

@@ -7,8 +7,6 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-#
 # @output MAIN0 Speed of left wheels
 # @output MAIN1 Speed of right wheels
 #

ROMFS/px4fmu_common/init.d/airframes/6002_draco_r

@@ -122,7 +122,7 @@ param set-default BAT_V_DIV 10.133
 
 # TELEM1 ttyS1
 param set-default MAV_0_CONFIG 101
-param set-default MAV_0_MODE 0	# onboard
+param set-default MAV_0_MODE 0
 param set-default MAV_0_FORWARD 1
 param set-default SER_TEL1_BAUD 57600
 

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -137,7 +137,7 @@ px4_add_romfs_files(
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark
-	13015_generic_vtol_standard
+	13030_generic_vtol_quad_tiltrotor
 	13050_generic_vtol_octo
 	13200_generic_vtol_tailsitter
 

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -16,6 +16,8 @@ param set-default COM_POS_FS_EPV 30
 param set-default COM_POS_FS_GAIN 0
 param set-default COM_POS_FS_PROB 1
 param set-default COM_VEL_FS_EVH 5
+# Disable preflight disarm to not interfere with external launching
+param set-default COM_DISARM_PRFLT -1
 
 param set-default EKF2_ARSP_THR 8
 param set-default EKF2_FUSE_BETA 1

ROMFS/px4fmu_common/init.d/rc.interface

@@ -30,9 +30,9 @@ then
 fi
 
 # USE_IO is set to 'no' for all boards w/o px4io driver or SYS_USE_IO disabled
-if [ $USE_IO = no ]
+if [ $USE_IO = no -a $AUX_BANK2 = none ]
 then
-	set MIXER_AUX none
+	set AUX_MODE none
 fi
 
 #
@@ -147,6 +147,7 @@ then
 	if mixer load ${OUTPUT_DEV} ${MIXER_FILE}
 	then
 		echo "INFO  [init] Mixer: ${MIXER_FILE} on ${OUTPUT_DEV}"
+
 	else
 		echo "ERROR  [init] Failed loading mixer: ${MIXER_FILE}"
 		tune_control play -t 18 # tune 18 = PROG_PX4IO_ERR
@@ -178,6 +179,7 @@ then
 
 	if [ $MIXER_AUX_FILE != none ]
 	then
+		# Start the output module
 		if $OUTPUT_CMD mode_${AUX_MODE}
 		then
 			# Append aux mixer to main device.
@@ -199,6 +201,7 @@ then
 					echo "ERROR  [init] Failed loading mixer: ${MIXER_AUX_FILE}"
 				fi
 			else
+				echo "INFO  [init] setting PWM_AUX_OUT none"
 				set PWM_AUX_OUT none
 			fi
 		else
@@ -223,6 +226,36 @@ then
 	fi
 fi
 
+if [ $MIXER_AUX != none -a $AUX_MODE = none -a -e $OUTPUT_AUX_DEV ]
+then
+	#
+	# Load aux mixer.
+	#
+	if [ -f ${SDCARD_MIXERS_PATH}/${MIXER_AUX}.aux.mix ]
+	then
+		set MIXER_AUX_FILE ${SDCARD_MIXERS_PATH}/${MIXER_AUX}.aux.mix
+	else
+
+		if [ -f /etc/mixers/${MIXER_AUX}.aux.mix ]
+		then
+			set MIXER_AUX_FILE /etc/mixers/${MIXER_AUX}.aux.mix
+		fi
+	fi
+
+	if mixer load ${OUTPUT_AUX_DEV} ${MIXER_AUX_FILE}
+	then
+		echo "INFO  [init] Mixer: ${MIXER_AUX_FILE} on ${OUTPUT_AUX_DEV}"
+
+		# Set PWM_AUX output frequency.
+		if [ $PWM_AUX_RATE != none ]
+		then
+			pwm rate -c ${PWM_AUX_OUT} -r ${PWM_AUX_RATE} -d ${OUTPUT_AUX_DEV}
+		fi
+	else
+		echo "ERROR  [init] Failed loading mixer: ${MIXER_AUX_FILE}"
+	fi
+fi
+
 if [ $OUTPUT_MODE = pwm_out -o $OUTPUT_MODE = io ]
 then
 	if [ $PWM_OUT != none ]

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -108,11 +108,18 @@ then
 	vl53l1x start -X
 fi
 
+# ADIS16448 spi external IMU
+if param compare -s SENS_EN_ADIS164X 1
+then
+	adis16448 -S start
+fi
+
 # probe for optional external I2C devices
 if param compare SENS_EXT_I2C_PRB 1
 then
+	icm20948_i2c_passthrough -X -q start
+
 	# compasses
-	ak09916 -X -R 6 -q start # external AK09916 (Here2) is rotated 270 degrees yaw
 	hmc5883 -T -X -q start
 	ist8308 -X -q start
 	ist8310 -X -q start
@@ -121,29 +128,31 @@ then
 	qmc5883l -X -q start
 	rm3100 -X -q start
 
+	# start last (wait for possible icm20948 passthrough mode)
+	ak09916 -X -q start
+
 	# differential pressure sensors
 	if [ ${VEHICLE_TYPE} = fw -o ${VEHICLE_TYPE} = vtol ]
 	then
-		if param compare CBRK_AIRSPD_CHK 0
+		# Always try to start the airspeed sensors
+		# even if their usage might be disabled
+		sdp3x_airspeed start -X -q
+		sdp3x_airspeed start -X -a 0x22 -q
+
+		# Pixhawk 2.1 has a MS5611 on I2C which gets wrongly
+		# detected as MS5525 because the chip manufacturer was so
+		# clever to assign the same I2C address and skip a WHO_AM_I
+		# register.
+		if [ $BOARD_FMUV3 = 21 ]
 		then
-			sdp3x_airspeed start -X -q
-			sdp3x_airspeed start -X -a 0x22 -q
-
-			# Pixhawk 2.1 has a MS5611 on I2C which gets wrongly
-			# detected as MS5525 because the chip manufacturer was so
-			# clever to assign the same I2C address and skip a WHO_AM_I
-			# register.
-			if [ $BOARD_FMUV3 = 21 ]
-			then
-				ms5525_airspeed start -X -b 2 -q
-			else
-				ms5525_airspeed start -X -q
-			fi
-
-			ms4525_airspeed start -X -q
-
-			ets_airspeed start -X -q
+			ms5525_airspeed start -X -b 2 -q
+		else
+			ms5525_airspeed start -X -q
 		fi
+
+		ms4525_airspeed start -X -q
+
+		ets_airspeed start -X -q
 	fi
 fi
 

ROMFS/px4fmu_common/init.d/rc.vtol_defaults

@@ -23,6 +23,7 @@ param set-default MPC_XY_ERR_MAX 5
 param set-default MPC_XY_VEL_MAX 4
 param set-default MPC_Z_VEL_MAX_DN 1.5
 param set-default MPC_JERK_MAX 4.5
+param set-default MPC_YAW_MODE 4
 
 param set-default NAV_ACC_RAD 3
 

ROMFS/px4fmu_common/init.d/rcS

@@ -51,12 +51,6 @@ set STARTUP_TUNE 1
 set USE_IO no
 set VEHICLE_TYPE none
 
-# Airframe parameter versioning: airframe maintainers can set this in the
-# airframe startup script, and then increase it by one whenever an airframe
-# parameter is updated - it will ensure that these parameters will be updated
-# when the firmware is flashed.
-set PARAM_DEFAULTS_VER 1
-
 #
 # Mount the procfs.
 #
@@ -171,12 +165,8 @@ else
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		if param compare SYS_AUTOCONFIG 1
-		then
-			# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
-			param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT* SYS_PARAM_VER
-		fi
-
+		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
+		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 		set AUTOCNF yes
 	fi
 
@@ -239,14 +229,6 @@ else
 	rgbled start -X -q
 	rgbled_ncp5623c start -X -q
 
-	if param greater -s LIGHT_EN_BLINKM 0
-	then
-		if blinkm start -X
-		then
-			blinkm systemstate
-		fi
-	fi
-
 	#
 	# Set parameters and env variables for selected AUTOSTART.
 	#
@@ -272,6 +254,34 @@ else
 		param set SYS_AUTOCONFIG 0
 	fi
 
+	#
+	# Check if UAVCAN is enabled, default to it for ESCs.
+	#
+	if param greater -s UAVCAN_ENABLE 0
+	then
+		# Start core UAVCAN module.
+		if uavcan start
+		then
+			if param greater UAVCAN_ENABLE 1
+			then
+				# Start UAVCAN firmware update server and dynamic node ID allocation server.
+				uavcan start fw
+				tune_control play -t 1
+				if param greater UAVCAN_ENABLE 2
+				then
+					set OUTPUT_MODE uavcan_esc
+				fi
+			fi
+		else
+			tune_control play error
+		fi
+	else
+		if param greater -s UAVCAN_V1_ENABLE 0
+		then
+			uavcan_v1 start
+		fi
+	fi
+
 	#
 	# Check if PX4IO present and update firmware if needed.
 	# Assumption IOFW set to firmware file and IO_PRESENT = no
@@ -303,6 +313,8 @@ else
 					else
 						tune_control play -t 18 # tune 18 = PROG_PX4IO_ERR
 					fi
+				else
+					tune_control stop
 				fi
 			fi
 		fi
@@ -414,34 +426,6 @@ else
 		camera_feedback start
 	fi
 
-	#
-	# Check if UAVCAN is enabled, default to it for ESCs.
-	#
-	if param greater -s UAVCAN_ENABLE 0
-	then
-		# Start core UAVCAN module.
-		if uavcan start
-		then
-			if param greater UAVCAN_ENABLE 1
-			then
-				# Start UAVCAN firmware update server and dynamic node ID allocation server.
-				uavcan start fw
-				tune_control play -t 1
-				if param greater UAVCAN_ENABLE 2
-				then
-					set OUTPUT_MODE uavcan_esc
-				fi
-			fi
-		else
-			tune_control play error
-		fi
-	fi
-
-	if param greater -s UAVCAN_V1_ENABLE 0
-	then
-		uavcan_v1 start
-	fi
-
 	#
 	# Optional board mavlink streams: rc.board_mavlink
 	#
@@ -516,6 +500,11 @@ else
 		gyro_fft start
 	fi
 
+	if param compare -s IMU_GYRO_CAL_EN 1
+	then
+		gyro_calibration start
+	fi
+
 	#
 	# Optional board supplied extras: rc.board_extras
 	#
@@ -565,15 +554,6 @@ else
 		fi
 	fi
 
-	if ! param compare SYS_PARAM_VER ${PARAM_DEFAULTS_VER}
-	then
-		echo "Switched to different parameter version. Resetting parameters."
-		param set SYS_PARAM_VER ${PARAM_DEFAULTS_VER}
-		param set SYS_AUTOCONFIG 2
-		param save
-		reboot
-	fi
-
 #
 # End of autostart.
 #
@@ -598,7 +578,6 @@ unset MIXER
 unset MIXER_AUX
 unset MIXER_FILE
 unset OUTPUT_MODE
-unset PARAM_DEFAULTS_VER
 unset PARAM_FILE
 unset PWM_AUX_OUT
 unset PWM_AUX_RATE

ROMFS/px4fmu_common/mixers/CMakeLists.txt

@@ -90,6 +90,7 @@ px4_add_romfs_files(
 	Viper.main.mix
 	vtol_AAERT.aux.mix
 	vtol_AAVVT.aux.mix
+	vtol_TTTTAAER.aux.mix
 	vtol_convergence.main.mix
 	vtol_delta.aux.mix
 	vtol_tailsitter_duo.main.mix

ROMFS/px4fmu_common/mixers/vtol_TTTTAAER.aux.mix

@@ -0,0 +1,39 @@
+# Generic quadplane tiltrotor servo mixer
+
+# Tilt mechanism servo mixer
+---------------------------
+# front left up:2000 down:1000
+M: 1
+S: 1 4      0 -20000  10000 -10000  10000
+
+# front right up:1000 down:2000
+M: 1
+S: 1 4      0  20000 -10000 -10000  10000
+
+# rear left up:2000 down:1000
+M: 1
+S: 1 4      0 -20000  10000 -10000  10000
+
+# rear right up:1000 down:2000
+M: 1
+S: 1 4      0  20000 -10000 -10000  10000
+
+
+# Aileron mixer
+# ---------------------------------
+M: 1
+S: 1 0  10000  10000      0 -10000  10000
+
+M: 1
+S: 1 0  10000  10000      0 -10000  10000
+
+
+# Elevator mixer
+# ------------
+M: 1
+S: 1 1  -10000  -10000    0 -10000  10000
+
+# Rudder mixer
+# ------------
+M: 1
+S: 1 2  10000  10000      0 -10000  10000

Tools/HIL/run_tests.py

@@ -103,12 +103,6 @@ class TestHardwareMethods(unittest.TestCase):
     def test_bson(self):
         self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "bson"))
 
-    def test_commander(self):
-        self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "commander"))
-
-    def test_controllib(self):
-        self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "controllib"))
-
     # def test_dataman(self):
     #     self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "dataman"))
 
@@ -172,9 +166,6 @@ class TestHardwareMethods(unittest.TestCase):
     def test_time(self):
         self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "time"))
 
-    def test_uorb(self):
-        self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "uorb"))
-
     def test_versioning(self):
         self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "versioning"))
 

Tools/astyle/check_code_style_all.sh

@@ -59,7 +59,7 @@ if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ]; then
 	fi
 fi
 
-${DIR}/files_to_check_code_style.sh | xargs -n 1 -P 8 -I % ${DIR}/check_code_style.sh %
+${DIR}/files_to_check_code_style.sh | xargs -P 8 -I % ${DIR}/check_code_style.sh %
 
 if [ $? -eq 0 ]; then
     echo "Format checks passed"

Tools/bloaty_static_ram.bloaty

@@ -0,0 +1,13 @@
+custom_data_source: {
+  name: "bloaty_static_ram"
+  base_data_source: "sections"
+
+  rewrite: {
+    pattern: "^\\.bss"
+    replacement: "ram"
+  }
+  rewrite: {
+    pattern: "^\\.data"
+    replacement: "ram"
+  }
+}

Tools/docker_run.sh

@@ -2,10 +2,7 @@
 
 if [ -z ${PX4_DOCKER_REPO+x} ]; then
 	echo "guessing PX4_DOCKER_REPO based on input";
-	if [[ $@ =~ .*px4_fmu.* ]]; then
-		# nuttx-px4fmu-v{1,2,3,4,5}
-		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-02-04"
-	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
+	if [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
 		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default
 		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2021-02-04"
 	elif [[ $@ =~ .*pilotpi.arm64 ]]; then
@@ -30,7 +27,7 @@ fi
 
 # otherwise default to nuttx
 if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2020-09-14"
+	PX4_DOCKER_REPO="ghcr.io/px4/px4-dev:2021-05-06"
 fi
 
 # docker hygiene
@@ -67,4 +64,5 @@ docker run -it --rm -w "${SRC_DIR}" \
 	--publish 14556:14556/udp \
 	--volume=${CCACHE_DIR}:${CCACHE_DIR}:rw \
 	--volume=${SRC_DIR}:${SRC_DIR}:rw \
+	-v /tmp/.X11-unix:/tmp/.X11-unix -e DISPLAY=$DISPLAY -h $HOSTNAME
 	${PX4_DOCKER_REPO} /bin/bash -c "$1 $2 $3"

Tools/generate_board_targets_json.py

@@ -0,0 +1,96 @@
+#!/usr/bin/env python3
+""" Script to generate a JSON config with all build targets (for CI) """
+
+import argparse
+import os
+import sys
+import json
+import re
+
+source_dir = os.path.join(os.path.dirname(os.path.abspath(__file__)), '..')
+
+parser = argparse.ArgumentParser(description='Generate build targets')
+
+parser.add_argument('-v', '--verbose', dest='verbose', action='store_true',
+                    help='Verbose Output')
+parser.add_argument('-p', '--pretty', dest='pretty', action='store_true',
+                    help='Pretty output instead of a single line')
+
+args = parser.parse_args()
+verbose = args.verbose
+
+build_configs = []
+excluded_manufacturers = ['atlflight']
+excluded_platforms = ['qurt']
+excluded_labels = [
+    'stackcheck',
+    'nolockstep', 'replay', 'test',
+    'uavcanv1' # TODO: fix and enable
+    ]
+
+def process_target(cmake_file, target_name):
+    ret = None
+    is_board_def = False
+    platform = None
+    toolchain = None
+    for line in open(cmake_file, 'r'):
+        if 'px4_add_board' in line:
+            is_board_def = True
+        if not is_board_def:
+            continue
+
+        re_platform = re.search('PLATFORM\s+([^\s]+)', line)
+        if re_platform: platform = re_platform.group(1)
+
+        re_toolchain = re.search('TOOLCHAIN\s+([^\s]+)', line)
+        if re_toolchain: toolchain = re_toolchain.group(1)
+
+    if is_board_def:
+        assert platform, f"PLATFORM not found in {cmake_file}"
+
+        if platform not in excluded_platforms:
+            # get the container based on the platform and toolchain
+            container = platform
+            if platform == 'posix':
+                container = 'base-focal'
+                if toolchain:
+                    if toolchain.startswith('aarch64'):
+                        container = 'aarch64'
+                    elif toolchain == 'arm-linux-gnueabihf':
+                        container = 'armhf'
+                    else:
+                        if verbose: print(f'possibly unmatched toolchain: {toolchain}')
+            elif platform == 'nuttx':
+                container = 'nuttx-focal'
+
+            ret = {'target': target_name, 'container': container}
+    return ret
+
+for manufacturer in os.scandir(os.path.join(source_dir, 'boards')):
+    if not manufacturer.is_dir():
+        continue
+    if manufacturer.name in excluded_manufacturers:
+        if verbose: print(f'excluding manufacturer {manufacturer.name}')
+        continue
+
+    for board in os.scandir(manufacturer.path):
+        if not board.is_dir():
+            continue
+        for files in os.scandir(board.path):
+            if files.is_file() and files.name.endswith('.cmake'):
+                label = files.name[:-6]
+                target_name = manufacturer.name + '_' + board.name + '_' + label
+                if label in excluded_labels:
+                    if verbose: print(f'excluding label {label} ({target_name})')
+                    continue
+                target = process_target(files.path, target_name)
+                if target is not None:
+                    build_configs.append(target)
+
+
+github_action_config = { 'include': build_configs }
+extra_args = {}
+if args.pretty:
+    extra_args['indent'] = 2
+print(json.dumps(github_action_config, **extra_args))
+

Tools/process_sensor_caldata.py

@@ -1,4 +1,4 @@
-#! /usr/bin/env python
+#! /usr/bin/env python3
 
 from __future__ import print_function
 
@@ -7,6 +7,7 @@ import os
 import math
 import matplotlib.pyplot as plt
 import numpy as np
+import scipy as sp
 
 from pyulog import *
 
@@ -63,6 +64,9 @@ def resampleWithDeltaX(x,y):
 
     return resampledX,resampledY
 
+def median_filter(data):
+    return sp.signal.medfilt(data, 31)
+
 parser = argparse.ArgumentParser(description='Reads in IMU data from a static thermal calibration test and performs a curve fit of gyro, accel and baro bias vs temperature')
 parser.add_argument('filename', metavar='file.ulg', help='ULog input file')
 parser.add_argument('--no_resample', dest='noResample', action='store_const',
@@ -184,12 +188,16 @@ if num_gyros >= 1 and not math.isnan(sensor_gyro_0['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_0_params['TC_G0_TMIN']-gyro_0_params['TC_G0_TREF'], gyro_0_params['TC_G0_TMAX']-gyro_0_params['TC_G0_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_0_params['TC_G0_TREF']
 
+    sensor_gyro_0['x'] = median_filter(sensor_gyro_0['x'])
+    sensor_gyro_0['y'] = median_filter(sensor_gyro_0['y'])
+    sensor_gyro_0['z'] = median_filter(sensor_gyro_0['z'])
+
     # fit X axis
     if noResample:
-        coef_gyro_0_x = np.polyfit(temp_rel,sensor_gyro_0['x'],3)
+        coef_gyro_0_x = np.polyfit(temp_rel, sensor_gyro_0['x'], 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_0['x'])
-        coef_gyro_0_x = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, sensor_gyro_0['x'])
+        coef_gyro_0_x = np.polyfit(temp, sens, 3)
 
     gyro_0_params['TC_G0_X3_0'] = coef_gyro_0_x[0]
     gyro_0_params['TC_G0_X2_0'] = coef_gyro_0_x[1]
@@ -200,10 +208,10 @@ if num_gyros >= 1 and not math.isnan(sensor_gyro_0['temperature'][0]):
 
     # fit Y axis
     if noResample:
-        coef_gyro_0_y = np.polyfit(temp_rel,sensor_gyro_0['y'],3)
+        coef_gyro_0_y = np.polyfit(temp_rel, sensor_gyro_0['y'], 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_0['y'])
-        coef_gyro_0_y = np.polyfit(temp, sens ,3)
+        coef_gyro_0_y = np.polyfit(temp, sens, 3)
 
     gyro_0_params['TC_G0_X3_1'] = coef_gyro_0_y[0]
     gyro_0_params['TC_G0_X2_1'] = coef_gyro_0_y[1]
@@ -214,9 +222,9 @@ if num_gyros >= 1 and not math.isnan(sensor_gyro_0['temperature'][0]):
 
     # fit Z axis
     if noResample:
-        coef_gyro_0_z = np.polyfit(temp_rel,sensor_gyro_0['z'],3)
+        coef_gyro_0_z = np.polyfit(temp_rel, sensor_gyro_0['z'],3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_0['z'])
+        temp, sens = resampleWithDeltaX(temp_rel, sensor_gyro_0['z'])
         coef_gyro_0_z = np.polyfit(temp, sens ,3)
 
     gyro_0_params['TC_G0_X3_2'] = coef_gyro_0_z[0]
@@ -292,6 +300,10 @@ if num_gyros >= 2 and not math.isnan(sensor_gyro_1['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_1_params['TC_G1_TMIN']-gyro_1_params['TC_G1_TREF'], gyro_1_params['TC_G1_TMAX']-gyro_1_params['TC_G1_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_1_params['TC_G1_TREF']
 
+    sensor_gyro_1['x'] = median_filter(sensor_gyro_1['x'])
+    sensor_gyro_1['y'] = median_filter(sensor_gyro_1['y'])
+    sensor_gyro_1['z'] = median_filter(sensor_gyro_1['z'])
+
     # fit X axis
     if noResample:
         coef_gyro_1_x = np.polyfit(temp_rel,sensor_gyro_1['x'],3)
@@ -400,6 +412,10 @@ if num_gyros >= 3 and not math.isnan(sensor_gyro_2['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_2_params['TC_G2_TMIN']-gyro_2_params['TC_G2_TREF'], gyro_2_params['TC_G2_TMAX']-gyro_2_params['TC_G2_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_2_params['TC_G2_TREF']
 
+    sensor_gyro_2['x'] = median_filter(sensor_gyro_2['x'])
+    sensor_gyro_2['y'] = median_filter(sensor_gyro_2['y'])
+    sensor_gyro_2['z'] = median_filter(sensor_gyro_2['z'])
+
     # fit X axis
     if noResample:
         coef_gyro_2_x = np.polyfit(temp_rel,sensor_gyro_2['x'],3)
@@ -416,10 +432,10 @@ if num_gyros >= 3 and not math.isnan(sensor_gyro_2['temperature'][0]):
 
     # fit Y axis
     if noResample:
-        coef_gyro_2_y = np.polyfit(temp_rel,sensor_gyro_2['y'],3)
+        coef_gyro_2_y = np.polyfit(temp_rel, sensor_gyro_2['y'], 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_2['y'])
-        coef_gyro_2_y = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, sensor_gyro_2['y'])
+        coef_gyro_2_y = np.polyfit(temp, sens, 3)
 
     gyro_2_params['TC_G2_X3_1'] = coef_gyro_2_y[0]
     gyro_2_params['TC_G2_X2_1'] = coef_gyro_2_y[1]
@@ -430,10 +446,10 @@ if num_gyros >= 3 and not math.isnan(sensor_gyro_2['temperature'][0]):
 
     # fit Z axis
     if noResample:
-        coef_gyro_2_z = np.polyfit(temp_rel,sensor_gyro_2['z'],3)
+        coef_gyro_2_z = np.polyfit(temp_rel,sensor_gyro_2['z'], 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,sensor_gyro_2['z'])
-        coef_gyro_2_z = np.polyfit(temp, sens ,3)
+        coef_gyro_2_z = np.polyfit(temp, sens, 3)
 
     gyro_2_params['TC_G2_X3_2'] = coef_gyro_2_z[0]
     gyro_2_params['TC_G2_X2_2'] = coef_gyro_2_z[1]
@@ -508,8 +524,12 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
     temp_rel_resample = np.linspace(gyro_3_params['TC_G3_TMIN']-gyro_3_params['TC_G3_TREF'], gyro_3_params['TC_G3_TMAX']-gyro_3_params['TC_G3_TREF'], 100)
     temp_resample = temp_rel_resample + gyro_3_params['TC_G3_TREF']
 
+    sensor_gyro_3['x'] = median_filter(sensor_gyro_3['x'])
+    sensor_gyro_3['y'] = median_filter(sensor_gyro_3['y'])
+    sensor_gyro_3['z'] = median_filter(sensor_gyro_3['z'])
+
     # fit X axis
-    coef_gyro_3_x = np.polyfit(temp_rel,sensor_gyro_3['x'],3)
+    coef_gyro_3_x = np.polyfit(temp_rel,sensor_gyro_3['x'], 3)
     gyro_3_params['TC_G3_X3_0'] = coef_gyro_3_x[0]
     gyro_3_params['TC_G3_X2_0'] = coef_gyro_3_x[1]
     gyro_3_params['TC_G3_X1_0'] = coef_gyro_3_x[2]
@@ -518,7 +538,7 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
     gyro_3_x_resample = fit_coef_gyro_3_x(temp_rel_resample)
 
     # fit Y axis
-    coef_gyro_3_y = np.polyfit(temp_rel,sensor_gyro_3['y'],3)
+    coef_gyro_3_y = np.polyfit(temp_rel,sensor_gyro_3['y'], 3)
     gyro_3_params['TC_G3_X3_1'] = coef_gyro_3_y[0]
     gyro_3_params['TC_G3_X2_1'] = coef_gyro_3_y[1]
     gyro_3_params['TC_G3_X1_1'] = coef_gyro_3_y[2]
@@ -527,7 +547,7 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
     gyro_3_y_resample = fit_coef_gyro_3_y(temp_rel_resample)
 
     # fit Z axis
-    coef_gyro_3_z = np.polyfit(temp_rel,sensor_gyro_3['z'],3)
+    coef_gyro_3_z = np.polyfit(temp_rel,sensor_gyro_3['z'], 3)
     gyro_3_params['TC_G3_X3_2'] = coef_gyro_3_z[0]
     gyro_3_params['TC_G3_X2_2'] = coef_gyro_3_z[1]
     gyro_3_params['TC_G3_X1_2'] = coef_gyro_3_z[2]
@@ -540,8 +560,8 @@ if num_gyros >= 4 and not math.isnan(sensor_gyro_3['temperature'][0]):
 
     # draw plots
     plt.subplot(3,1,1)
-    plt.plot(sensor_gyro_3['temperature'],sensor_gyro_3['x'],'b')
-    plt.plot(temp_resample,gyro_3_x_resample,'r')
+    plt.plot(sensor_gyro_3['temperature'],sensor_gyro_3['x'], 'b')
+    plt.plot(temp_resample,gyro_3_x_resample, 'r')
     plt.title('Gyro 2 ({}) Bias vs Temperature'.format(gyro_3_params['TC_G3_ID']))
     plt.ylabel('X bias (rad/s)')
     plt.xlabel('temperature (degC)')
@@ -601,13 +621,17 @@ if num_accels >= 1 and not math.isnan(sensor_accel_0['temperature'][0]):
     temp_rel_resample = np.linspace(accel_0_params['TC_A0_TMIN']-accel_0_params['TC_A0_TREF'], accel_0_params['TC_A0_TMAX']-accel_0_params['TC_A0_TREF'], 100)
     temp_resample = temp_rel_resample + accel_0_params['TC_A0_TREF']
 
+    sensor_accel_0['x'] = median_filter(sensor_accel_0['x'])
+    sensor_accel_0['y'] = median_filter(sensor_accel_0['y'])
+    sensor_accel_0['z'] = median_filter(sensor_accel_0['z'])
+
     # fit X axis
     correction_x = sensor_accel_0['x'] - np.median(sensor_accel_0['x'])
     if noResample:
-        coef_accel_0_x = np.polyfit(temp_rel,correction_x,3)
+        coef_accel_0_x = np.polyfit(temp_rel,correction_x, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_x)
-        coef_accel_0_x = np.polyfit(temp, sens ,3)
+        coef_accel_0_x = np.polyfit(temp, sens, 3)
 
     accel_0_params['TC_A0_X3_0'] = coef_accel_0_x[0]
     accel_0_params['TC_A0_X2_0'] = coef_accel_0_x[1]
@@ -617,12 +641,12 @@ if num_accels >= 1 and not math.isnan(sensor_accel_0['temperature'][0]):
     correction_x_resample = fit_coef_accel_0_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_0['y']-np.median(sensor_accel_0['y'])
+    correction_y = sensor_accel_0['y'] - np.median(sensor_accel_0['y'])
     if noResample:
-        coef_accel_0_y = np.polyfit(temp_rel,correction_y,3)
+        coef_accel_0_y = np.polyfit(temp_rel, correction_y, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_y)
-        coef_accel_0_y = np.polyfit(temp, sens ,3)
+        coef_accel_0_y = np.polyfit(temp, sens, 3)
 
     accel_0_params['TC_A0_X3_1'] = coef_accel_0_y[0]
     accel_0_params['TC_A0_X2_1'] = coef_accel_0_y[1]
@@ -632,12 +656,12 @@ if num_accels >= 1 and not math.isnan(sensor_accel_0['temperature'][0]):
     correction_y_resample = fit_coef_accel_0_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = sensor_accel_0['z']-np.median(sensor_accel_0['z'])
+    correction_z = sensor_accel_0['z'] - np.median(sensor_accel_0['z'])
     if noResample:
-        coef_accel_0_z = np.polyfit(temp_rel,correction_z,3)
+        coef_accel_0_z = np.polyfit(temp_rel,correction_z, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_z)
-        coef_accel_0_z = np.polyfit(temp, sens ,3)
+        coef_accel_0_z = np.polyfit(temp, sens, 3)
 
     accel_0_params['TC_A0_X3_2'] = coef_accel_0_z[0]
     accel_0_params['TC_A0_X2_2'] = coef_accel_0_z[1]
@@ -712,13 +736,17 @@ if num_accels >= 2 and not math.isnan(sensor_accel_1['temperature'][0]):
     temp_rel_resample = np.linspace(accel_1_params['TC_A1_TMIN']-accel_1_params['TC_A1_TREF'], accel_1_params['TC_A1_TMAX']-accel_1_params['TC_A1_TREF'], 100)
     temp_resample = temp_rel_resample + accel_1_params['TC_A1_TREF']
 
+    sensor_accel_1['x'] = median_filter(sensor_accel_1['x'])
+    sensor_accel_1['y'] = median_filter(sensor_accel_1['y'])
+    sensor_accel_1['z'] = median_filter(sensor_accel_1['z'])
+
     # fit X axis
-    correction_x = sensor_accel_1['x']-np.median(sensor_accel_1['x'])
+    correction_x = sensor_accel_1['x'] - np.median(sensor_accel_1['x'])
     if noResample:
-        coef_accel_1_x = np.polyfit(temp_rel,correction_x,3)
+        coef_accel_1_x = np.polyfit(temp_rel, correction_x, 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,correction_x)
-        coef_accel_1_x = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, correction_x)
+        coef_accel_1_x = np.polyfit(temp, sens, 3)
 
     accel_1_params['TC_A1_X3_0'] = coef_accel_1_x[0]
     accel_1_params['TC_A1_X2_0'] = coef_accel_1_x[1]
@@ -728,7 +756,7 @@ if num_accels >= 2 and not math.isnan(sensor_accel_1['temperature'][0]):
     correction_x_resample = fit_coef_accel_1_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_1['y']-np.median(sensor_accel_1['y'])
+    correction_y = sensor_accel_1['y'] - np.median(sensor_accel_1['y'])
     if noResample:
         coef_accel_1_y = np.polyfit(temp_rel,correction_y,3)
     else:
@@ -743,12 +771,12 @@ if num_accels >= 2 and not math.isnan(sensor_accel_1['temperature'][0]):
     correction_y_resample = fit_coef_accel_1_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = (sensor_accel_1['z'])-np.median(sensor_accel_1['z'])
+    correction_z = sensor_accel_1['z'] - np.median(sensor_accel_1['z'])
     if noResample:
-        coef_accel_1_z = np.polyfit(temp_rel,correction_z,3)
+        coef_accel_1_z = np.polyfit(temp_rel,correction_z, 3)
     else:
         temp, sens = resampleWithDeltaX(temp_rel,correction_z)
-        coef_accel_1_z = np.polyfit(temp, sens ,3)
+        coef_accel_1_z = np.polyfit(temp, sens, 3)
 
     accel_1_params['TC_A1_X3_2'] = coef_accel_1_z[0]
     accel_1_params['TC_A1_X2_2'] = coef_accel_1_z[1]
@@ -824,13 +852,17 @@ if num_accels >= 3 and not math.isnan(sensor_accel_2['temperature'][0]):
     temp_rel_resample = np.linspace(accel_2_params['TC_A2_TMIN']-accel_2_params['TC_A2_TREF'], accel_2_params['TC_A2_TMAX']-accel_2_params['TC_A2_TREF'], 100)
     temp_resample = temp_rel_resample + accel_2_params['TC_A2_TREF']
 
+    sensor_accel_2['x'] = median_filter(sensor_accel_2['x'])
+    sensor_accel_2['y'] = median_filter(sensor_accel_2['y'])
+    sensor_accel_2['z'] = median_filter(sensor_accel_2['z'])
+
     # fit X axis
-    correction_x = sensor_accel_2['x']-np.median(sensor_accel_2['x'])
+    correction_x = sensor_accel_2['x'] - np.median(sensor_accel_2['x'])
     if noResample:
-        coef_accel_2_x = np.polyfit(temp_rel,correction_x,3)
+        coef_accel_2_x = np.polyfit(temp_rel,correction_x, 3)
     else:
-        temp, sens = resampleWithDeltaX(temp_rel,correction_x)
-        coef_accel_2_x = np.polyfit(temp, sens ,3)
+        temp, sens = resampleWithDeltaX(temp_rel, correction_x)
+        coef_accel_2_x = np.polyfit(temp, sens, 3)
 
     accel_2_params['TC_A2_X3_0'] = coef_accel_2_x[0]
     accel_2_params['TC_A2_X2_0'] = coef_accel_2_x[1]
@@ -840,7 +872,7 @@ if num_accels >= 3 and not math.isnan(sensor_accel_2['temperature'][0]):
     correction_x_resample = fit_coef_accel_2_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_2['y']-np.median(sensor_accel_2['y'])
+    correction_y = sensor_accel_2['y'] - np.median(sensor_accel_2['y'])
     if noResample:
         coef_accel_2_y = np.polyfit(temp_rel,correction_y,3)
     else:
@@ -855,7 +887,7 @@ if num_accels >= 3 and not math.isnan(sensor_accel_2['temperature'][0]):
     correction_y_resample = fit_coef_accel_2_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = sensor_accel_2['z']-np.median(sensor_accel_2['z'])
+    correction_z = sensor_accel_2['z'] - np.median(sensor_accel_2['z'])
     if noResample:
         coef_accel_2_z = np.polyfit(temp_rel,correction_z,3)
     else:
@@ -935,9 +967,13 @@ if num_accels >= 4 and not math.isnan(sensor_accel_3['temperature'][0]):
     temp_rel_resample = np.linspace(accel_3_params['TC_A3_TMIN']-accel_3_params['TC_A3_TREF'], accel_3_params['TC_A3_TMAX']-accel_3_params['TC_A3_TREF'], 100)
     temp_resample = temp_rel_resample + accel_3_params['TC_A3_TREF']
 
+    sensor_accel_3['x'] = median_filter(sensor_accel_3['x'])
+    sensor_accel_3['y'] = median_filter(sensor_accel_3['y'])
+    sensor_accel_3['z'] = median_filter(sensor_accel_3['z'])
+
     # fit X axis
-    correction_x = sensor_accel_3['x']-np.median(sensor_accel_3['x'])
-    coef_accel_3_x = np.polyfit(temp_rel,correction_x,3)
+    correction_x = sensor_accel_3['x'] - np.median(sensor_accel_3['x'])
+    coef_accel_3_x = np.polyfit(temp_rel, correction_x, 3)
     accel_3_params['TC_A3_X3_0'] = coef_accel_3_x[0]
     accel_3_params['TC_A3_X2_0'] = coef_accel_3_x[1]
     accel_3_params['TC_A3_X1_0'] = coef_accel_3_x[2]
@@ -946,8 +982,8 @@ if num_accels >= 4 and not math.isnan(sensor_accel_3['temperature'][0]):
     correction_x_resample = fit_coef_accel_3_x(temp_rel_resample)
 
     # fit Y axis
-    correction_y = sensor_accel_3['y']-np.median(sensor_accel_3['y'])
-    coef_accel_3_y = np.polyfit(temp_rel,correction_y,3)
+    correction_y = sensor_accel_3['y'] - np.median(sensor_accel_3['y'])
+    coef_accel_3_y = np.polyfit(temp_rel, correction_y, 3)
     accel_3_params['TC_A3_X3_1'] = coef_accel_3_y[0]
     accel_3_params['TC_A3_X2_1'] = coef_accel_3_y[1]
     accel_3_params['TC_A3_X1_1'] = coef_accel_3_y[2]
@@ -956,8 +992,8 @@ if num_accels >= 4 and not math.isnan(sensor_accel_3['temperature'][0]):
     correction_y_resample = fit_coef_accel_3_y(temp_rel_resample)
 
     # fit Z axis
-    correction_z = sensor_accel_3['z']-np.median(sensor_accel_3['z'])
-    coef_accel_3_z = np.polyfit(temp_rel,correction_z,3)
+    correction_z = sensor_accel_3['z'] - np.median(sensor_accel_3['z'])
+    coef_accel_3_z = np.polyfit(temp_rel, correction_z, 3)
     accel_3_params['TC_A3_X3_2'] = coef_accel_3_z[0]
     accel_3_params['TC_A3_X2_2'] = coef_accel_3_z[1]
     accel_3_params['TC_A3_X1_2'] = coef_accel_3_z[2]
@@ -1024,8 +1060,10 @@ temp_rel = sensor_baro_0['temperature'] - baro_0_params['TC_B0_TREF']
 temp_rel_resample = np.linspace(baro_0_params['TC_B0_TMIN']-baro_0_params['TC_B0_TREF'], baro_0_params['TC_B0_TMAX']-baro_0_params['TC_B0_TREF'], 100)
 temp_resample = temp_rel_resample + baro_0_params['TC_B0_TREF']
 
+sensor_baro_0['pressure'] = median_filter(sensor_baro_0['pressure'])
+
 # fit data
-median_pressure = np.median(sensor_baro_0['pressure']);
+median_pressure = np.median(sensor_baro_0['pressure'])
 if noResample:
     coef_baro_0_x = np.polyfit(temp_rel,100*(sensor_baro_0['pressure']-median_pressure),5) # convert from hPa to Pa
 else:
@@ -1081,8 +1119,10 @@ if num_baros >= 2:
     temp_rel_resample = np.linspace(baro_1_params['TC_B1_TMIN']-baro_1_params['TC_B1_TREF'], baro_1_params['TC_B1_TMAX']-baro_1_params['TC_B1_TREF'], 100)
     temp_resample = temp_rel_resample + baro_1_params['TC_B1_TREF']
 
+    sensor_baro_1['pressure'] = median_filter(sensor_baro_1['pressure'])
+
     # fit data
-    median_pressure = np.median(sensor_baro_1['pressure']);
+    median_pressure = np.median(sensor_baro_1['pressure'])
     if noResample:
         coef_baro_1_x = np.polyfit(temp_rel,100*(sensor_baro_1['pressure']-median_pressure),5) # convert from hPa to Pa
     else:
@@ -1099,7 +1139,7 @@ if num_baros >= 2:
     baro_1_x_resample = fit_coef_baro_1_x(temp_rel_resample)
 
     # baro 2 vs temperature
-    plt.figure(9,figsize=(20,13))
+    plt.figure(10,figsize=(20,13))
 
     # draw plots
     plt.plot(sensor_baro_1['temperature'],100*sensor_baro_1['pressure']-100*median_pressure,'b')
@@ -1139,8 +1179,10 @@ if num_baros >= 3:
     temp_rel_resample = np.linspace(baro_2_params['TC_B2_TMIN']-baro_2_params['TC_B2_TREF'], baro_2_params['TC_B2_TMAX']-baro_2_params['TC_B2_TREF'], 100)
     temp_resample = temp_rel_resample + baro_2_params['TC_B2_TREF']
 
+    sensor_baro_2['pressure'] = median_filter(sensor_baro_2['pressure'])
+
     # fit data
-    median_pressure = np.median(sensor_baro_2['pressure']);
+    median_pressure = np.median(sensor_baro_2['pressure'])
     if noResample:
         coef_baro_2_x = np.polyfit(temp_rel,100*(sensor_baro_2['pressure']-median_pressure),5) # convert from hPa to Pa
     else:
@@ -1157,7 +1199,7 @@ if num_baros >= 3:
     baro_2_x_resample = fit_coef_baro_2_x(temp_rel_resample)
 
     # baro 2 vs temperature
-    plt.figure(10,figsize=(20,13))
+    plt.figure(11,figsize=(20,13))
 
     # draw plots
     plt.plot(sensor_baro_2['temperature'],100*sensor_baro_2['pressure']-100*median_pressure,'b')
@@ -1197,6 +1239,8 @@ if num_baros >= 4:
     temp_rel_resample = np.linspace(baro_3_params['TC_B3_TMIN']-baro_3_params['TC_B3_TREF'], baro_3_params['TC_B3_TMAX']-baro_3_params['TC_B3_TREF'], 100)
     temp_resample = temp_rel_resample + baro_3_params['TC_B3_TREF']
 
+    sensor_baro_3['pressure'] = median_filter(sensor_baro_3['pressure'])
+
     # fit data
     median_pressure = np.median(sensor_baro_3['pressure'])
     coef_baro_3_x = np.polyfit(temp_rel,100*(sensor_baro_3['pressure']-median_pressure),5) # convert from hPa to Pa
@@ -1210,7 +1254,7 @@ if num_baros >= 4:
     baro_3_x_resample = fit_coef_baro_3_x(temp_rel_resample)
 
     # baro 3 vs temperature
-    plt.figure(11,figsize=(20,13))
+    plt.figure(12,figsize=(20,13))
 
     # draw plots
     plt.plot(sensor_baro_3['temperature'],100*sensor_baro_3['pressure']-100*median_pressure,'b')

Tools/px4.py

@@ -65,7 +65,7 @@ def get_version():
 
     if os.path.isdir(os.path.join(px4_dir, '.git')):
         # If inside a clone PX4 Firmware repository, get version from "git describe"
-        cmd = 'git describe --abbrev=0 --tags'
+        cmd = 'git describe --exclude ext/* --abbrev=0 --tags'
         try:
             version = subprocess.check_output(
                 cmd, cwd=px4_dir, shell=True).decode().strip()

Tools/px4airframes/srcparser.py

@@ -98,6 +98,8 @@ class ParameterGroup(object):
             return "Boat"
         elif (self.name == "Balloon"):
             return "Balloon"
+        elif (self.name == "Vectored 6 DOF UUV"):
+            return "Vectored6DofUUV"
         return "AirframeUnknown"
 
     def GetParams(self):

Tools/px_mkfw.py

@@ -99,13 +99,13 @@ if args.summary != None:
 if args.description != None:
 	desc['description']	= str(args.description)
 if args.git_identity != None:
-	cmd = "git --git-dir '{:}/.git' describe --always --tags".format(args.git_identity)
+	cmd = "git --git-dir '{:}/.git' describe --exclude ext/* --always --tags".format(args.git_identity)
 	p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE).stdout
-	desc['git_identity']	= str(p.read().strip())
+	desc['git_identity']	= p.read().strip().decode('utf-8')
 	p.close()
 	cmd = "git --git-dir '{:}/.git' rev-parse --verify HEAD".format(args.git_identity)
 	p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE).stdout
-	desc['git_hash']	= str(p.read().strip())
+	desc['git_hash']	= p.read().strip().decode('utf-8')
 	p.close()
 if args.parameter_xml != None:
 	f = open(args.parameter_xml, "rb")

Tools/px_romfs_pruner.py

@@ -61,6 +61,8 @@ def main():
                         help="Board architecture for this run")
     args = parser.parse_args()
 
+    err_count = 0
+
     # go through temp folder
     for (root, dirs, files) in os.walk(args.folder):
         for file in files:
@@ -90,8 +92,17 @@ def main():
             # read file line by line
             pruned_content = ""
             board_excluded = False
+
             with io.open(file_path, "r", newline=None) as f:
                 for line in f:
+                    # abort if spurious tabs are found
+                    if re.search(r"[a-zA-Z0-9]+\t.+", line):
+                        file_local = re.sub(args.folder, '', file_path)
+                        print("ERROR: Spurious TAB character in file " + file_local)
+                        print("Line: " + line)
+                        err_count += 1
+
+                    # find excluded boards
                     if re.search(r'\b{0} exclude\b'.format(args.board), line):
                         board_excluded = True
                     # handle mixer files differently than startup files
@@ -116,6 +127,9 @@ def main():
             else:
                 os.remove(file_path)
 
+    if (err_count > 0):
+        exit(1)
+
 
 if __name__ == '__main__':
     main()

Tools/serial/generate_config.py

@@ -190,7 +190,6 @@ if rc_serial_output_dir is None and serial_params_output_file is None:
 serial_commands = []
 ethernet_configuration = []
 additional_params = ""
-additional_ethernet_params = ""
 
 if ethernet_supported:
     ethernet_configuration.append({
@@ -211,7 +210,7 @@ def parse_yaml_serial_config(yaml_config):
         ret.append(serial_config)
     return ret
 
-def parse_yaml_parameters_config(yaml_config):
+def parse_yaml_parameters_config(yaml_config, ethernet_supported):
     """ parse the parameters section from the yaml config file """
     if 'parameters' not in yaml_config:
         return ''
@@ -224,79 +223,7 @@ def parse_yaml_parameters_config(yaml_config):
         param_group = parameters_section.get('group', None)
         for param_name in definitions:
             param = definitions[param_name]
-            if 'ethernet' in param:
-                continue
-            num_instances = param.get('num_instances', 1)
-            instance_start = param.get('instance_start', 0) # offset
-
-            # get the type and extract all tags
-            tags = '@group {:}'.format(param_group)
-            if param['type'] == 'enum':
-                param_type = 'INT32'
-                for key in param['values']:
-                    tags += '\n * @value {:} {:}'.format(key, param['values'][key])
-            elif param['type'] == 'boolean':
-                param_type = 'INT32'
-                tags += '\n * @boolean'
-            elif param['type'] == 'int32':
-                param_type = 'INT32'
-            elif param['type'] == 'float':
-                param_type = 'FLOAT'
-            else:
-                raise Exception("unknown param type {:}".format(param['type']))
-
-            for tag in ['decimal', 'increment', 'category', 'volatile', 'bit',
-                        'min', 'max', 'unit', 'reboot_required']:
-                if tag in param:
-                    tags += '\n * @{:} {:}'.format(tag, param[tag])
-
-            for i in range(num_instances):
-                # default value
-                default_value = 0
-                if 'default' in param:
-                    # default can be a list of num_instances or a single value
-                    if type(param['default']) == list:
-                        assert len(param['default']) == num_instances
-                        default_value = param['default'][i]
-                    else:
-                        default_value = param['default']
-
-                if type(default_value) == bool:
-                    default_value = int(default_value)
-
-                # output the existing C-style format
-                ret += '''
-/**
- * {short_descr}
- *
- * {long_descr}
- *
- * {tags}
- */
-PARAM_DEFINE_{param_type}({name}, {default_value});
-'''.format(short_descr=param['description']['short'].replace("\n", "\n * "),
-           long_descr=param['description']['long'].replace("\n", "\n * "),
-           tags=tags,
-           param_type=param_type,
-           name=param_name,
-           default_value=default_value,
-          ).replace('${i}', str(i+instance_start))
-    return ret
-
-def parse_yaml_ethernet_parameters_config(yaml_config):
-    """ parse the parameters section from the yaml config file """
-    if 'parameters' not in yaml_config:
-        return ''
-    parameters_section_list = yaml_config['parameters']
-    for parameters_section in parameters_section_list:
-        if 'definitions' not in parameters_section:
-            return ''
-        definitions = parameters_section['definitions']
-        ret = ''
-        param_group = parameters_section.get('group', None)
-        for param_name in definitions:
-            param = definitions[param_name]
-            if 'ethernet' not in param:
+            if param.get('requires_ethernet', False) and not ethernet_supported:
                 continue
             num_instances = param.get('num_instances', 1)
             instance_start = param.get('instance_start', 0) # offset
@@ -362,9 +289,8 @@ for yaml_file in args.config_files:
             serial_commands.extend(parse_yaml_serial_config(yaml_config))
 
             # TODO: additional params should be parsed in a separate script
-            additional_params += parse_yaml_parameters_config(yaml_config)
-            if ethernet_supported:
-                additional_ethernet_params += parse_yaml_ethernet_parameters_config(yaml_config)
+            additional_params += parse_yaml_parameters_config(
+                yaml_config, ethernet_supported)
 
         except yaml.YAMLError as exc:
             print(exc)
@@ -429,7 +355,7 @@ for serial_command in serial_commands:
             'default_port': default_port,
             'param_group': port_config['group'],
             'description_extended': port_config.get('description_extended', ''),
-			'ethernet_config': serial_command.get('ethernet', 'none')
+			'supports_networking': serial_command.get('supports_networking', False)
             })
 
 if verbose:
@@ -473,6 +399,5 @@ if serial_params_output_file is not None:
         fid.write(template.render(serial_devices=serial_devices,
             ethernet_configuration=ethernet_configuration,
             commands=commands, serial_ports=serial_ports,
-            additional_definitions=additional_params,
-            additional_ethernet_definitions=additional_ethernet_params))
+            additional_definitions=additional_params))
 

Tools/serial/rc.serial_port.jinja

@@ -17,9 +17,9 @@ if param compare "$PRT" {{ serial_device.index }}; then
 fi
 
 {% endfor %}
+
 {% for config in ethernet_configuration -%}
 if param compare "$PRT" {{ config.index }}; then
 	set SERIAL_DEV ethernet
 fi
-
 {% endfor %}

Tools/serial/serial_params.c.jinja

@@ -58,10 +58,11 @@ PARAM_DEFINE_INT32(SER_{{ serial_device.tag }}_BAUD, {{ serial_device.default_ba
 {%- for serial_device in serial_devices %}
  * @value {{ serial_device.index }} {{ serial_device.label }}
 {%- endfor %}
-{%- if command.ethernet_config != "none" %}
+{%- if command.supports_networking %}
 {%- for config in ethernet_configuration %}
  * @value {{ config.index }} {{ config.label }}
-{%- endfor %}{% endif %}
+{%- endfor %}
+{%- endif %}
  * @group {{ command.param_group }}
  * @reboot_required true
  */
@@ -72,5 +73,3 @@ PARAM_DEFINE_INT32({{ command.port_param_name }}, {{ command.default_port }});
 
 {{ additional_definitions }}
 
-{{ additional_ethernet_definitions }}
-

Tools/setup/Makefile

@@ -0,0 +1,11 @@
+.PHONY: docker_build docker_push all
+
+DATE := $(shell date +%Y-%m-%d)
+
+docker_build:
+	docker build -f Dockerfile -t px4-dev:${DATE} .
+
+docker_push: build
+        docker push px4io/px4-dev:${DATE}
+
+all: docker_build

Tools/setup/arch.sh

@@ -155,8 +155,7 @@ if [[ $INSTALL_SIM == "true" ]]; then
 			# fix VMWare 3D graphics acceleration for gazebo
 			exportline="export SVGA_VGPU10=0"
 
-			if grep -Fxq "$exportline" $HOME/.profile; then
-			else
+			if !grep -Fxq "$exportline" $HOME/.profile; then
 				echo $exportline >> $HOME/.profile;
 			fi
 		fi