ci: fix S3 upload so tags don't overwrite stable firmware

Remove the step that uploaded every version tag to the stable/ S3 directory, which caused QGC users selecting "stable" to receive pre-release firmware (#26340). The stable/ and beta/ directories are now controlled exclusively by their respective branch pushes, while version tags only upload to their versioned archive directory (e.g., v1.16.1/). Pre-release tags are also correctly marked on GitHub Releases. Co-authored-by: Julian Oes <julian@oes.ch> Fixes #26340 Signed-off-by: Ramon Roche <mrpollo@gmail.com>
CI: replace all usage of addnab/docker-run-action
2026-05-24 00:07:34 +08:00 · 2026-02-13 07:25:28 -08:00 · 2026-02-13 06:35:09 -08:00 · 2026-01-30 09:35:49 +01:00 · 2026-01-22 13:55:38 +01:00 · 2026-01-22 13:53:45 +01:00
1162 changed files with 42940 additions and 13014 deletions
@@ -0,0 +1,24 @@
+runners:
+  x86-small-runner:
+    cpu: [1, 2]
+    ram: [1, 4]
+    disk: default
+    spot: price-capacity-optimized
+    image: ubuntu24-full-x64
+    extras: s3-cache
+  x86-firmware-builder:
+    cpu: [4, 8]
+    ram: [8, 16]
+    disk: default
+    family: ["c7i", "m7i", "r7i"]
+    spot: price-capacity-optimized
+    image: ubuntu24-full-x64
+    extras: s3-cache
+  arm64-firmware-builder:
+    cpu: [4, 8]
+    ram: [8, 16]
+    disk: default
+    family: ["c7g", "m7g", "r7g"]
+    spot: price-capacity-optimized
+    image: ubuntu24-full-arm64
+    extras: s3-cache
@@ -2,6 +2,37 @@
 # - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
 #   and comment the "runs-on: [runs-on,runner=..." lines.
 # - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
+#
+# ===================================================================================
+# RELEASE UPLOAD LOGIC
+# ===================================================================================
+# This workflow handles building firmware and uploading to S3 + GitHub Releases.
+#
+# S3 Bucket Structure (s3://px4-travis/Firmware/):
+#   - master/          <- Latest main branch build (for QGC compatibility)
+#   - stable/          <- Latest stable release, controlled by 'stable' branch
+#   - beta/            <- Latest pre-release, controlled by 'beta' branch
+#   - vX.Y.Z/          <- Archived stable release
+#   - vX.Y.Z-beta1/    <- Archived pre-release
+#
+# Trigger Behavior:
+#   - Tag v1.16.1        -> Upload to: v1.16.1/ only (versioned archive)
+#   - Tag v1.17.0-beta1  -> Upload to: v1.17.0-beta1/ only (versioned archive)
+#   - Branch main        -> Upload to: master/ (for QGC compatibility)
+#   - Branch stable      -> Upload to: stable/ (QGC stable firmware)
+#   - Branch beta        -> Upload to: beta/ (QGC beta firmware)
+#   - Branch release/**  -> Build only, no S3 upload (CI validation)
+#   - Pull requests      -> Build only, no S3 upload (CI validation)
+#
+# GitHub Releases:
+#   - All version tags create a draft GitHub Release
+#   - Pre-releases (alpha/beta/rc suffixes) are automatically marked as such
+#
+# IMPORTANT: Version tags do NOT upload to stable/ or beta/. Only the
+# corresponding branch pushes control those directories. This prevents
+# pre-release tags from accidentally overwriting stable firmware (#26340)
+# and avoids race conditions between tag and branch builds.
+# ===================================================================================

 name: Build all targets

@@ -26,11 +57,15 @@ concurrency:
  group: ${{ github.workflow }}-${{ github.ref }}
  cancel-in-progress: true

+permissions:
+  contents: write
+  actions: read
+
 jobs:
  group_targets:
    name: Scan for Board Targets
    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    outputs:
      matrix: ${{ steps.set-matrix.outputs.matrix }}
      timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
@@ -38,6 +73,14 @@ jobs:
    steps:
      - uses: actions/checkout@v4

+      - name: Cache Python pip
+        uses: actions/cache@v4
+        with:
+          path: ~/.cache/pip
+          key: ${{ runner.os }}-pip-${{ hashFiles('**./Tools/setup/requirements.txt') }}
+          restore-keys: |
+            ${{ runner.os }}-pip-
+
      - name: Update python packaging to avoid canonicalize_version() error
        run: |
            pip3 install -U packaging
@@ -48,12 +91,15 @@ jobs:
          path: "./Tools/setup/requirements.txt"

      - id: set-matrix
-        run: echo "::set-output name=matrix::$(./Tools/ci/generate_board_targets_json.py --group)"
+        name: Generate Build Matrix
+        run: echo "matrix=$(./Tools/ci/generate_board_targets_json.py --group)" >> $GITHUB_OUTPUT

      - id: set-timestamp
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
+        name: Save Current Timestamp
+        run: echo "timestamp=$(date +"%Y%m%d%H%M%S")" >> $GITHUB_OUTPUT

      - id: set-branch
+        name: Save Current Branch Name
        run: |
          echo "branchname=${{
            github.event_name == 'pull_request' &&
@@ -70,7 +116,7 @@ jobs:
          echo "$(./Tools/ci/generate_board_targets_json.py --group --verbose)"

  setup:
-    name: Build Group [${{ matrix.group }}][${{ matrix.arch == 'nuttx' && 'x86' || 'arm64' }}]
+    name: Build [${{ matrix.runner }}][${{ matrix.group }}]
    # runs-on: ubuntu-latest
    runs-on: [runs-on,"runner=8cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",spot=false]
    needs: group_targets
@@ -80,6 +126,7 @@ jobs:
    container:
      image: ${{ matrix.container }}
    steps:
+      - uses: runs-on/action@v2
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0
@@ -87,14 +134,24 @@ jobs:
      - name: Git ownership workaround
        run: git config --system --add safe.directory '*'

-      - name: Setup ccache
-        uses: actions/cache@v4
+      # ccache key breakdown:
+      # ccache-<system os>-<system arch>-<builder group>-
+      # ccache-<linux>-<arm64>-<aarch64-0>-
+      # ccache-<linux>-<x64>-<nuttx-0>-
+      - name: Cache Restore from Key
+        id: cc_restore
+        uses: actions/cache/restore@v4
        with:
          path: ~/.ccache
-          key: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-          restore-keys: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
+          key: ${{ format('ccache-{0}-{1}-{2}', runner.os, matrix.runner, matrix.group) }}
+          restore-keys: |
+            ccache-${{ runner.os }}-${{ matrix.runner }}-${{ matrix.group }}-
+            ccache-${{ runner.os }}-${{ matrix.runner }}-
+            ccache-${{ runner.os }}-${{ matrix.runner }}-
+            ccache-${{ runner.os }}-
+            ccache-

-      - name: Configure ccache
+      - name: Cache Config and Stats
        run: |
            mkdir -p ~/.ccache
            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
@@ -102,10 +159,11 @@ jobs:
            echo "compression_level = 6" >> ~/.ccache/ccache.conf
            echo "max_size = 120M" >> ~/.ccache/ccache.conf
            echo "hash_dir = false" >> ~/.ccache/ccache.conf
+            echo "compiler_check = content" >> ~/.ccache/ccache.conf
            ccache -s
            ccache -z

-      - name: Building [${{ matrix.group }}]
+      - name: Building Artifacts for [${{ matrix.targets }}]
        run: |
            ./Tools/ci/build_all_runner.sh ${{matrix.targets}} ${{matrix.arch}}

@@ -119,15 +177,34 @@ jobs:
          name: px4_${{matrix.group}}_build_artifacts
          path: artifacts/

-      - name: Cache Save
-        run: ccache -s
+      - name: Cache Post Build Stats
+        if: always()
+        run: |
+            ccache -s
+            ccache -z

+      - name: Cache Save
+        if: always()
+        uses: actions/cache/save@v4
+        with:
+          path: ~/.ccache
+          key: ${{ steps.cc_restore.outputs.cache-primary-key }}
+
+  # ===========================================================================
+  # ARTIFACT UPLOAD JOB
+  # ===========================================================================
+  # Uploads build artifacts to S3 and creates GitHub Releases.
+  # Runs for version tags (v*), main, stable, and beta branch pushes.
+  # See header comments for full upload logic documentation.
+  # ===========================================================================
  artifacts:
-    name: Upload Artifacts to S3
+    name: Upload Artifacts
    # runs-on: ubuntu-latest
    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    needs: [setup, group_targets]
-    if: contains(fromJSON('["main", "stable", "beta"]'), needs.group_targets.outputs.branchname)
+    if: startsWith(github.ref, 'refs/tags/v') || contains(fromJSON('["main","stable","beta"]'), needs.group_targets.outputs.branchname)
+    outputs:
+      uploadlocation: ${{ steps.upload-location.outputs.uploadlocation }}
    steps:
      - name: Download Artifacts
        uses: actions/download-artifact@v4
@@ -135,11 +212,36 @@ jobs:
          path: artifacts/
          merge-multiple: true

-      - name: Branch Name
+      - name: Choose Upload Location
+        id: upload-location
        run: |
-          echo "${{ needs.group_targets.outputs.branchname }}"
+          set -euo pipefail

-      - name: Uploading Artifacts to S3 [${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}]
+          ref="${GITHUB_REF}"
+          branch=${{ needs.group_targets.outputs.branchname  }}
+          location="$branch"
+          is_prerelease="false"
+
+          # Main branch uploads to "master" for QGC backward compatibility
+          if [[ "$branch" == "main" ]]; then
+            location="master"
+          fi
+
+          # Version tags: upload to versioned directory (e.g., v1.16.1/)
+          if [[ "$ref" == refs/tags/v[0-9]* ]]; then
+            tag="${ref#refs/tags/}"
+            location="$tag"
+
+            # Pre-release tags contain -alpha, -beta, or -rc suffix
+            if [[ "$tag" =~ -(alpha|beta|rc) ]]; then
+              is_prerelease="true"
+            fi
+          fi
+
+          echo "uploadlocation=$location" >> $GITHUB_OUTPUT
+          echo "is_prerelease=$is_prerelease" >> $GITHUB_OUTPUT
+
+      - name: Uploading Artifacts to S3 [${{ steps.upload-location.outputs.uploadlocation }}]
        uses: jakejarvis/s3-sync-action@master
        with:
          args: --acl public-read
@@ -149,25 +251,15 @@ jobs:
          AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
          AWS_REGION: 'us-west-1'
          SOURCE_DIR: artifacts/
-          DEST_DIR: Firmware/${{ needs.group_targets.outputs.branchname == 'main' && 'master' || needs.group_targets.outputs.branchname }}/
+          DEST_DIR: Firmware/${{ steps.upload-location.outputs.uploadlocation }}/

-  release:
-    name: Create Release and Upload Artifacts
-    permissions:
-      contents: write
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
-    needs: [setup, group_targets]
-    if: startsWith(github.ref, 'refs/tags/')
-    steps:
-      - name: Download Artifacts
-        uses: actions/download-artifact@v4
-        with:
-          path: artifacts/
-          merge-multiple: true
-
-      - name: Upload Binaries to Release
+      # Create a draft GitHub Release for all version tags
+      # Pre-releases are automatically marked as such
+      - name: Upload Artifacts to GitHub Release
        uses: softprops/action-gh-release@v2
+        if: startsWith(github.ref, 'refs/tags/v')
        with:
          draft: true
+          prerelease: ${{ steps.upload-location.outputs.is_prerelease == 'true' }}
          files: artifacts/*.px4
+          name: ${{ steps.upload-location.outputs.uploadlocation }}
@@ -19,6 +19,10 @@ concurrency:
 jobs:
  build:
    runs-on: ubuntu-latest
+
+    container:
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+
    strategy:
      fail-fast: false
      matrix:
@@ -35,20 +39,17 @@ jobs:
          "px4_sitl_allyes",
          "module_documentation",
        ]
+
    steps:
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0

      - name: Building [${{ matrix.check }}]
-        uses: addnab/docker-run-action@v3
-        with:
-          image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
-          options: -v ${{ github.workspace }}:/workspace
-          run: |
-            cd /workspace
-            git config --global --add safe.directory /workspace
-            make ${{ matrix.check }}
+        run: |
+          cd "$GITHUB_WORKSPACE"
+          git config --global --add safe.directory "$GITHUB_WORKSPACE"
+          make ${{ matrix.check }}

      - name: Uploading Coverage to Codecov.io
        if: contains(matrix.check, 'coverage')
@@ -29,7 +29,7 @@ jobs:
      fail-fast: false
      matrix:
        version: ['ubuntu:22.04', 'ubuntu:24.04']
-    runs-on: [runs-on,runner=8cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,"image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false]
    container:
      image: ${{ matrix.version }}
      volumes:
@@ -39,7 +39,7 @@ jobs:
    name: Set Tags and Variables
    permissions:
      contents: read
-    runs-on: [runs-on,"runner=1cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,"runner=1cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
    outputs:
      px4_version: ${{ steps.px4_version.outputs.px4_version }}
      meta_tags: ${{ steps.meta.outputs.tags }}
@@ -87,7 +87,7 @@ jobs:
          - platform: linux/amd64
            arch: amd64
            runner: x64
-    runs-on: [runs-on,"runner=8cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,"runner=4cpu-linux-${{ matrix.runner }}","image=ubuntu24-full-${{ matrix.runner }}","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
    steps:
      - uses: runs-on/action@v1
      - uses: actions/checkout@v4
@@ -138,7 +138,7 @@ jobs:
    permissions:
      contents: read
      packages: write
-    runs-on: [runs-on,"runner=8cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,"runner=4cpu-linux-x64","image=ubuntu24-full-x64","run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
    needs: [build, setup]
    if: ${{ startsWith(github.ref, 'refs/tags/') || (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_registry) }}
    steps:
@@ -1,19 +1,6 @@
-name: Docs - Deploy PX4 User Guide
+name: Docs - Deploy PX4 User Guide to Github pages (Manual)

 on:
-  push:
-    branches:
-      - 'main'
-      - 'release/**'
-    paths:
-      - 'docs/en/**'
-  pull_request:
-    branches:
-      - '**'
-    paths:
-      - 'docs/en/**'
-
-  # Allows you to run this workflow manually from the Actions tab
  workflow_dispatch:

 # Sets permissions of the GITHUB_TOKEN to allow deployment to GitHub Pages
@@ -33,7 +20,7 @@ env:

 jobs:
  build:
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",extras=s3-cache,spot=false]
    steps:
      - uses: runs-on/action@v1
      - name: Checkout
@@ -68,7 +55,7 @@ jobs:
  deploy:
    if: ${{ github.event_name == 'push' || (github.event_name == 'pull_request' && github.event.pull_request.merged) || github.event_name == 'workflow_dispatch' }}
    needs: build
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]

    steps:
      - name: Download Artifact
@@ -7,42 +7,52 @@ on:
      - "release/**"
    paths:
      - "docs/en/**"
+      - "docs/zh/**"
+      - "docs/uk/**"
+      - "docs/ko/**"
  pull_request:
-    branches:
-      - "**"
    paths:
      - "docs/en/**"
+      - "docs/zh/**"
+      - "docs/uk/**"
+      - "docs/ko/**"

  workflow_dispatch:

 permissions:
  contents: read
+  actions: read
  id-token: write # for AWS OIDC

 concurrency:
  group: docs-deploy
  cancel-in-progress: false

-env:
-  BRANCH_NAME: ${{ github.head_ref || github.ref_name }}
-
 jobs:
  build:
-    runs-on:
-      [
-        runs-on,
-        runner=8cpu-linux-x64,
-        image=ubuntu24-full-x64,
-        "run-id=${{ github.run_id }}",
-        spot=false,
-        extras=s3-cache,
-      ]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false,extras=s3-cache]
+    outputs:
+      branchname: ${{ steps.set-branch.outputs.branchname }}
+      releaseversion: ${{ steps.set-version.outputs.releaseversion }}
    steps:
      - uses: runs-on/action@v1

      - name: Checkout
        uses: actions/checkout@v4

+      - id: set-branch
+        run: echo "branchname=${GITHUB_HEAD_REF:-${GITHUB_REF#refs/heads/}}" >> $GITHUB_OUTPUT
+
+      - id: set-version
+        run: |
+          branch="${{ steps.set-branch.outputs.branchname }}"
+          if [[ "$branch" == "main" ]]; then
+            version="main"
+          else
+            version="v${branch#release/}"
+          fi
+          echo "releaseversion=$version" >> $GITHUB_OUTPUT
+
      - name: Setup Node
        uses: actions/setup-node@v4
        with:
@@ -55,6 +65,8 @@ jobs:

      - name: Build with VitePress
        working-directory: ./docs
+        env:
+          BRANCH_NAME: ${{ steps.set-version.outputs.releaseversion }}
        run: |
          npm run docs:build_ubuntu
          touch .vitepress/dist/.nojekyll
@@ -91,14 +103,14 @@ jobs:

      - name: Upload HTML with short cache
        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ env.BRANCH_NAME }}/ \
+          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
            --delete \
            --exclude "*" --include "*.html" \
            --cache-control "public, max-age=60"

      - name: Upload assets with long cache
        run: |
-          aws s3 sync ~/_book/ s3://px4-docs/${{ env.BRANCH_NAME }}/ \
+          aws s3 sync ~/_book/ s3://px4-docs/${{ needs.build.outputs.releaseversion }}/ \
            --delete \
            --exclude "*.html" \
            --cache-control "public, max-age=86400, immutable"
@@ -15,21 +15,21 @@ concurrency:
 jobs:
  unit_tests:
    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0

-    - name: main test
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
-        options: -v ${{ github.workspace }}:/workspace
+    container:
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: main test
        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
+          cd "$GITHUB_WORKSPACE"
+          git config --global --add safe.directory "$GITHUB_WORKSPACE"
          make tests TESTFILTER=EKF

-    - name: Check if there is a functional change
-      run: git diff --exit-code
-      working-directory: src/modules/ekf2/test/change_indication
+      - name: Check if there is a functional change
+        run: git diff --exit-code
+        working-directory: src/modules/ekf2/test/change_indication
@@ -8,40 +8,47 @@ on:
 jobs:
  unit_tests:
    runs-on: ubuntu-latest
+
+    container:
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+
    env:
      GIT_COMMITTER_EMAIL: bot@px4.io
      GIT_COMMITTER_NAME: PX4BuildBot
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0

-    - name: main test
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
-        options: -v ${{ github.workspace }}:/workspace
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: main test
        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
+          cd "$GITHUB_WORKSPACE"
+          git config --global --add safe.directory "$GITHUB_WORKSPACE"
          make tests TESTFILTER=EKF

-    - name: Check if there exists diff and save result in variable
-      id: diff-check
-      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_OUTPUT
-      working-directory: src/modules/ekf2/test/change_indication
+      - name: Check if there exists diff and save result in variable
+        id: diff-check
+        working-directory: src/modules/ekf2/test/change_indication
+        run: |
+          if git diff --quiet; then
+            echo "CHANGE_INDICATED=false" >> $GITHUB_OUTPUT
+          else
+            echo "CHANGE_INDICATED=true" >> $GITHUB_OUTPUT
+          fi

-    - name: auto-commit any changes to change indication
-      uses: stefanzweifel/git-auto-commit-action@v4
-      with:
-        file_pattern: 'src/modules/ekf2/test/change_indication/*.csv'
-        commit_user_name: ${GIT_COMMITTER_NAME}
-        commit_user_email: ${GIT_COMMITTER_EMAIL}
-        commit_message: |
-          '[AUTO COMMIT] update change indication'
+      - name: auto-commit any changes to change indication
+        if: steps.diff-check.outputs.CHANGE_INDICATED == 'true'
+        uses: stefanzweifel/git-auto-commit-action@v4
+        with:
+          file_pattern: 'src/modules/ekf2/test/change_indication/*.csv'
+          commit_user_name: ${{ env.GIT_COMMITTER_NAME }}
+          commit_user_email: ${{ env.GIT_COMMITTER_EMAIL }}
+          commit_message: |
+            [AUTO COMMIT] update change indication

-          See .github/workflopws/ekf_update_change_indicator.yml for more details
+            See .github/workflows/ekf_update_change_indicator.yml for more details

-    - name: if there is a functional change, fail check
-      if: ${{ steps.diff-check.outputs.CHANGE_INDICATED }}
-      run: exit 1
+      - name: if there is a functional change, fail check
+        if: steps.diff-check.outputs.CHANGE_INDICATED == 'true'
+        run: exit 1
@@ -48,6 +48,7 @@ jobs:
        run: |
          git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
          cd _emscripten_sdk
+          git checkout 4.0.15
          ./emsdk install latest
          ./emsdk activate latest

@@ -24,7 +24,7 @@ env:
 jobs:
  analyze_flash:
    name: Analyzing ${{ matrix.target }}
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
    strategy:
@@ -97,7 +97,7 @@ jobs:
  # Track this issue https://github.com/PX4/PX4-Autopilot/issues/24408
  post_pr_comment:
    name: Publish Results
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}"]
    needs: [analyze_flash]
    env:
      V5X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-absolute) }}
@@ -5,6 +5,7 @@ on:

 permissions:
  contents: read
+  issues: write # for JasonEtco/create-an-issue

 env:
  RUNS_IN_DOCKER: true
@@ -22,7 +22,7 @@ concurrency:
 jobs:
  check_itcm:
    name: Checking ${{ matrix.target }}
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
    strategy:
@@ -41,6 +41,10 @@ jobs:
            scripts: >
              boards/nxp/tropic-community/nuttx-config/scripts/itcm_functions_includes.ld
              boards/nxp/tropic-community/nuttx-config/scripts/itcm_static_functions.ld
+          - target: nxp_mr-tropic
+            scripts: >
+              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_functions_includes.ld
+              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_static_functions.ld
    steps:
      - uses: actions/checkout@v4
        with:
@@ -19,25 +19,27 @@ concurrency:
 jobs:
  build:
    runs-on: ubuntu-latest
+
    strategy:
      fail-fast: false
-      matrix:
-        config:
-          - {vehicle: "iris",          mission: "MC_mission_box"}

    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0

-    - name: Build SITL and Run Tests
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-ros-melodic:2021-09-08
-        options: -v ${{ github.workspace }}:/workspace
+      - name: Build SITL and Run Tests (inside old ROS container)
        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          make px4_sitl_default
-          make px4_sitl_default sitl_gazebo-classic
-          ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
+          docker run --rm \
+            -v "${GITHUB_WORKSPACE}:/workspace" \
+            -w /workspace \
+            px4io/px4-dev-ros-melodic:2021-09-08 \
+            bash -c '
+              git config --global --add safe.directory /workspace
+              make px4_sitl_default
+              make px4_sitl_default sitl_gazebo-classic
+              ./test/rostest_px4_run.sh \
+                mavros_posix_test_mission.test \
+                mission:=MC_mission_box \
+                vehicle:=iris
+            '
@@ -19,27 +19,26 @@ concurrency:
 jobs:
  build:
    runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
+
    strategy:
      fail-fast: false
-      matrix:
-        config:
-          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris"}

    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0

-    - name: Build PX4 and Run Tests
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev-ros-melodic:2021-09-08
-        options: -v ${{ github.workspace }}:/workspace
+      - name: Build SITL and Run Tests (inside old ROS container)
        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          make px4_sitl_default
-          make px4_sitl_default sitl_gazebo-classic
-          ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
+          docker run --rm \
+            -v "${GITHUB_WORKSPACE}:/workspace" \
+            -w /workspace \
+            px4io/px4-dev-ros-melodic:2021-09-08 \
+            bash -c '
+              git config --global --add safe.directory /workspace
+              make px4_sitl_default
+              make px4_sitl_default sitl_gazebo-classic
+              ./test/rostest_px4_run.sh \
+                mavros_posix_tests_offboard_posctl.test \
+                vehicle:=iris
+            '
@@ -19,27 +19,28 @@ concurrency:
 jobs:
  build:
    runs-on: ubuntu-latest
+
+    container:
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
+
    strategy:
      matrix:
-        config: [
-          px4_fmu-v5_default,
-          ]
+        config:
+          - px4_fmu-v5_default

    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0

-    - name: Build PX4 and Run Test [${{ matrix.config }}]
-      uses: addnab/docker-run-action@v3
-      with:
-        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
-        options: -v ${{ github.workspace }}:/workspace
+      - name: Build PX4 and Run Test [${{ matrix.config }}]
        run: |
-          cd /workspace
-          git config --global --add safe.directory /workspace
-          export PX4_EXTRA_NUTTX_CONFIG="CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
+          cd "$GITHUB_WORKSPACE"
+          git config --global --add safe.directory "$GITHUB_WORKSPACE"
+          export PX4_EXTRA_NUTTX_CONFIG='CONFIG_NSH_LOGIN_PASSWORD="test";CONFIG_NSH_CONSOLE_LOGIN=y'
          echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
+
          make ${{ matrix.config }} nuttx_context
+
          echo "Check that the config option is set"
          grep CONFIG_NSH_LOGIN_PASSWORD build/${{ matrix.config }}/NuttX/nuttx/.config
@@ -23,7 +23,7 @@ concurrency:

 jobs:
  build:
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev-ros2-galactic:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
@@ -21,7 +21,7 @@ concurrency:
 jobs:
  build_and_test:
    name: Build and test
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    strategy:
      fail-fast: false
      matrix:
@@ -24,7 +24,7 @@ concurrency:
 jobs:
  build:
    name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
    container:
      image: px4io/px4-dev-simulation-focal:2021-09-08
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
@@ -7,10 +7,15 @@ jobs:
  stale:
    runs-on: ubuntu-latest
    steps:
-      - uses: actions/stale@v8
+      - uses: actions/stale@v10
        with:
-          days-before-stale: 30
-          days-before-close: -1
+          operations-per-run: 250
+          days-before-stale: 90
+          days-before-close: 30
          stale-issue-label: 'stale'
          stale-pr-label: 'stale'
          remove-stale-when-updated: true
+          stale-issue-message: 'This issue has been marked as stale due to 90 days of inactivity. If no further activity occurs, it will be automatically closed in 30 days. Please leave a comment, add a reaction, make an update, or remove the stale label if you’d like to keep it open.'
+          close-issue-message: 'This issue has been closed due to prolonged inactivity after being marked as stale. If you believe this was closed in error or the topic is still relevant, please feel free to reopen it or create a new issue.'
+          stale-pr-message: 'This PR was identified as stale and it will be closed in 30 days unless any activity is detected.'
+          close-pr-message: 'This pull request has been closed after being marked as stale with no further activity. Thank you for the time and effort you put into this contribution. If you’d like to continue the discussion or update the work, please feel free to reopen it or submit a new PR.'
@@ -100,3 +100,6 @@
 [submodule "src/drivers/ins/microstrain/mip_sdk"]
 	path = src/drivers/ins/microstrain/mip_sdk
 	url = https://github.com/PX4/LORD-MicroStrain_mip_sdk.git
+[submodule "src/drivers/ins/sbgecom/sbgECom"]
+	path = src/drivers/ins/sbgecom/sbgECom
+	url = https://github.com/PX4/sbgECom.git
@@ -36,6 +36,11 @@ CONFIG:
      buildType: RelWithDebInfo
      settings:
        CONFIG: px4_sitl_test
+    px4_sitl_zenoh:
+      short: px4_sitl_zenoh
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_test
    px4_io-v2_default:
      short: px4_io-v2
      buildType: MinSizeRel
@@ -201,6 +206,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_dist_canbootloader
+    ark_f9p-gps_default:
+      short: ark_f9p-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_f9p-gps_default
+    ark_f9p-gps_canbootloader:
+      short: ark_f9p-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_f9p-gps_canbootloader
    ark_fmu-v6x_bootloader:
      short: ark_fmu-v6x_bootloader
      buildType: MinSizeRel
@@ -231,6 +246,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_pi6x_default
+    ark_x20-gps_default:
+      short: ark_x20-gps_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_x20-gps_default
+    ark_x20-gps_canbootloader:
+      short: ark_x20-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_x20-gps_canbootloader
    atl_mantis-edu_default:
      short: atl_mantis-edu
      buildType: MinSizeRel
@@ -431,6 +456,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: nxp_mr-canhubk3_fmu
+    nxp_mr-tropic_default:
+      short: nxp_mr-tropic_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_mr-tropic_default
+    nxp_mr-tropic_bootloader:
+      short: nxp_mr-tropic_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_mr-tropic_bootloader
    nxp_tropic-community_default:
      short: nxp_tropic-community_default
      buildType: MinSizeRel
@@ -43,7 +43,7 @@
        "files.watcherExclude": {
                "**/build/**": true
        },
-        "git.detectSubmodulesLimit": 20,
+        "git.detectSubmodulesLimit": 25,
        "git.ignoreLimitWarning": true,
        "githubPullRequests.defaultMergeMethod": "squash",
        "githubPullRequests.telemetry.enabled": false,
@@ -73,6 +73,11 @@ menu "Toolchain"
        help
            relative path to the ROMFS root directory

+    config BOARD_ADDITIONAL_INIT
+        string "Additional init file"
+        help
+            additional configurable init file to include in the ROMFS
+
    config BOARD_IO
        string "IO board name"
        default "px4_io-v2_default"
@@ -19,7 +19,7 @@ See [the documentation on Maintainers](https://docs.px4.io/main/en/contribute/ma
 | Matthias Grob | Multirotor | [@MaEtUgR](https://github.com/MaEtUgR) | maetugr |
 | Silvan Fuhrer | Fixed-Wing / VTOL | [@sfuhrer](https://github.com/sfuhrer) | sfuhrer |
 | Christian Friedrich | Rover | [@chfriedrich98](https://github.com/chfriedrich98) | christian982564 |
-| Pedro Roque | Spacecraft | [@Pedro-Roque](https://github.com/Pedro-Roque) | .pedroroque | <padr@kth.se>
+| Pedro Roque | Spacecraft | [@Pedro-Roque](https://github.com/Pedro-Roque) | .pedroroque | <roque@caltech.edu>
 | Jacob Dahl | Simulation | [@dakejahl](https://github.com/dakejahl) | dakejahl | <dahl.jakejacob@gmail.com>


@@ -325,6 +325,8 @@ bootloaders_update: \
 	ark_fmu-v6x_bootloader \
 	ark_fpv_bootloader \
 	ark_pi6x_bootloader \
+	auterion_fmu-v6s_bootloader \
+	auterion_fmu-v6x_bootloader \
 	cuav_nora_bootloader \
 	cuav_x7pro_bootloader \
 	cuav_7-nano_bootloader \
@@ -511,6 +513,7 @@ validate_module_configs:
 	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
 	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" \
 	-not -path "$(SRC_DIR)/src/modules/uxrce_dds_client/dds_topics.yaml" \
+	-not -path "$(SRC_DIR)/src/modules/zenoh/dds_topics.yaml" \
 	-not -path "$(SRC_DIR)/src/modules/zenoh/zenoh-pico/*" \
 	-not -path "$(SRC_DIR)/src/lib/events/libevents/*" \
 	-not -path "$(SRC_DIR)/src/lib/cdrstream/*" \
@@ -85,10 +85,32 @@ endif()
 if(PX4_ETHERNET)
 	set(added_arguments ${added_arguments} --ethernet)
 endif()
+# Check if board has an rc.board_airframes file to filter airframes
+set(board_airframes_file "${PX4_BOARD_DIR}/init/rc.board_airframes")
+set(airframes_whitelist "")
+if(EXISTS "${board_airframes_file}")
+	message(STATUS "ROMFS: Using board-specific airframes list: ${board_airframes_file}")
+	file(STRINGS "${board_airframes_file}" airframes_whitelist)
+	# Remove comments and empty lines
+	list(FILTER airframes_whitelist EXCLUDE REGEX "^[ \t]*#")
+	list(FILTER airframes_whitelist EXCLUDE REGEX "^[ \t]*$")
+endif()
+
 # create list of relative romfs file names
 set(romfs_copy_files_relative)
 foreach(romfs_file IN LISTS romfs_copy_files)
 	string(REPLACE "${romfs_src_dir}/" "" romfs_file_rel ${romfs_file})
+
+	# If we have an airframes whitelist, filter airframe files
+	if(airframes_whitelist AND romfs_file_rel MATCHES "^init.d/airframes/")
+		# Extract just the filename
+		get_filename_component(airframe_name "${romfs_file_rel}" NAME)
+		# Check if it's in the whitelist
+		if(NOT "${airframe_name}" IN_LIST airframes_whitelist)
+			continue()
+		endif()
+	endif()
+
 	list(APPEND romfs_copy_files_relative ${romfs_file_rel})
 endforeach()
 # copy the ROMFS files by creating a tar and extracting it to the build
@@ -202,6 +224,31 @@ foreach(board_rc_file ${OPTIONAL_BOARD_RC})

 endforeach()

+if(config_additional_init)
+	if(EXISTS "${PX4_BOARD_DIR}/init/${config_additional_init}")
+		file(RELATIVE_PATH rc_file_relative ${PX4_SOURCE_DIR} ${PX4_BOARD_DIR}/init/${config_additional_init})
+		message(STATUS "ROMFS:  Adding ${rc_file_relative} -> /etc/init.d/rc.additional_init")
+
+		add_custom_command(
+			OUTPUT
+				${romfs_gen_root_dir}/init.d/rc.additional_init
+				${config_additional_init}.stamp
+			COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PX4_BOARD_DIR}/init/${config_additional_init} ${romfs_gen_root_dir}/init.d/rc.additional_init
+			COMMAND ${CMAKE_COMMAND} -E touch ${config_additional_init}.stamp
+			DEPENDS
+				${PX4_BOARD_DIR}/init/${config_additional_init}
+				romfs_copy.stamp
+			COMMENT "ROMFS: copying ${config_additional_init}"
+		)
+
+		list(APPEND extras_dependencies
+			${config_additional_init}.stamp
+			)
+	else()
+		message(FATAL_ERROR "BOARD_ADDITIONAL_INIT file not found at: ${PX4_BOARD_DIR}/init/${config_additional_init}")
+	endif()
+endif()
+

 # board extras
 set(OPTIONAL_BOARD_EXTRAS)
@@ -56,6 +56,17 @@ then
 fi
 unset BOARD_RC_DEFAULTS

+#
+# Optional additional init file: rc.additional_init
+#
+set BOARD_RC_ADDITIONAL_INIT ${R}etc/init.d/rc.additional_init
+if [ -f $BOARD_RC_ADDITIONAL_INIT ]
+then
+	echo "Board additional init: ${BOARD_RC_ADDITIONAL_INIT}"
+	. $BOARD_RC_ADDITIONAL_INIT
+fi
+unset BOARD_RC_ADDITIONAL_INIT
+
 #
 # Start system state indicator.
 #
@@ -17,6 +17,7 @@ param set-default NAV_ACC_RAD 0.5
 param set-default RD_WHEEL_TRACK 0.6
 param set-default RD_TRANS_DRV_TRN 0.785398
 param set-default RD_TRANS_TRN_DRV 0.174533
+param set-default RD_YAW_STK_GAIN 0.6

 # Rate Control Parameters
 param set-default RO_YAW_RATE_I 0.01
@@ -25,6 +26,8 @@ param set-default RO_YAW_RATE_LIM 250
 param set-default RO_YAW_ACCEL_LIM 400
 param set-default RO_YAW_DECEL_LIM 800
 param set-default RO_YAW_RATE_CORR 1
+param set-default RO_YAW_EXPO 0.85
+param set-default RO_YAW_SUPEXPO 0.3

 # Attitude Control Parameters
 param set-default RO_YAW_P 5
@@ -1,5 +1,5 @@
 #!/bin/sh
-# @name Rover Ackermann
+# @name Generic Ackermann Rover
 # @type Rover
 # @class Rover

@@ -14,30 +14,32 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default NAV_ACC_RAD 0.5

 # Ackermann Parameters
-param set-default RA_WHEEL_BASE 0.321
+param set-default RA_WHEEL_BASE 0.5
 param set-default RA_ACC_RAD_GAIN 2
-param set-default RA_ACC_RAD_MAX 3
+param set-default RA_ACC_RAD_MAX 1.5
 param set-default RA_MAX_STR_ANG 0.5236
 param set-default RA_STR_RATE_LIM 360

-# Rover Control Parameters
-param set-default RO_ACCEL_LIM 3
-param set-default RO_DECEL_LIM 6
-param set-default RO_JERK_LIM 15
-param set-default RO_MAX_THR_SPEED 3.1
-
-# Rover Rate Control Parameters
-param set-default RO_YAW_RATE_I 0.1
-param set-default RO_YAW_RATE_P 1
-param set-default RO_YAW_RATE_LIM 180
+# Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.01
+param set-default RO_YAW_RATE_P 0.25
+param set-default RO_YAW_RATE_LIM 130
+param set-default RO_YAW_ACCEL_LIM 800
+param set-default RO_YAW_DECEL_LIM 800
 param set-default RO_YAW_RATE_CORR 1
+param set-default RO_YAW_EXPO 0.85
+param set-default RO_YAW_SUPEXPO 0.3

-# Rover Attitude Control Parameters
+# Attitude Control Parameters
 param set-default RO_YAW_P 3

-# Rover Velocity Control Parameters
-param set-default RO_SPEED_LIM 3
-param set-default RO_SPEED_I 0.1
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 4
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 3.1
+param set-default RO_SPEED_LIM 2.5
+param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 1
 param set-default RO_SPEED_RED 1

@@ -48,8 +50,8 @@ param set-default PP_LOOKAHD_MIN 1

 # Wheels
 param set-default SIM_GZ_WH_FUNC1 101
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_MIN1 70
+param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100

 # Steering
@@ -1,5 +1,5 @@
 #!/bin/sh
-# @name Aion Robotics R1 Rover
+# @name Generic Mecanum Rover
 # @type Rover
 # @class Rover

@@ -7,14 +7,15 @@

 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
 PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover_mecanum}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_mecanum}

 param set-default SIM_GZ_EN 1 # Gazebo bridge

 param set-default NAV_ACC_RAD 0.5

 # Mecanum Parameters
-param set-default RM_WHEEL_TRACK 0.3
+param set-default RM_WHEEL_TRACK 0.6
+param set-default RM_YAW_STK_GAIN 0.6

 # Rover Control Parameters
 param set-default RO_ACCEL_LIM 3
@@ -29,15 +30,21 @@ param set-default RO_YAW_RATE_LIM 120
 param set-default RO_YAW_ACCEL_LIM 240
 param set-default RO_YAW_DECEL_LIM 1000
 param set-default RO_YAW_RATE_CORR 1.75
+param set-default RO_YAW_EXPO 0.85
+param set-default RO_YAW_SUPEXPO 0.3

 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5

-# Rover Velocity Control Parameters
-param set-default RO_SPEED_LIM 2
-param set-default RO_SPEED_I 0.5
-param set-default RO_SPEED_P 1
-param set-default RO_SPEED_RED 1
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 4
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 3.1
+param set-default RO_SPEED_LIM 2.5
+param set-default RO_SPEED_I 0.01
+param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_RED 0.5

 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 0.5
@@ -48,24 +55,24 @@ param set-default PP_LOOKAHD_MIN 1
 param set-default SENS_EN_MAGSIM 1

 # Actuator mapping
-param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
+param set-default SIM_GZ_WH_FUNC1 104 # left wheel back
 param set-default SIM_GZ_WH_MIN1 70
 param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100

-param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
+param set-default SIM_GZ_WH_FUNC2 103 # right wheel back
 param set-default SIM_GZ_WH_MIN2 70
 param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100

-param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
+param set-default SIM_GZ_WH_FUNC3 102 # left wheel front
 param set-default SIM_GZ_WH_MIN3 70
 param set-default SIM_GZ_WH_MAX3 130
 param set-default SIM_GZ_WH_DIS3 100

-param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
+param set-default SIM_GZ_WH_FUNC4 101 # right wheel front
 param set-default SIM_GZ_WH_MIN4 70
 param set-default SIM_GZ_WH_MAX4 130
 param set-default SIM_GZ_WH_DIS4 100

-param set-default SIM_GZ_WH_REV 10
+param set-default SIM_GZ_WH_REV 0
@@ -34,7 +34,6 @@ param set-default COM_LOW_BAT_ACT 0
 param set-default NAV_DLL_ACT 0
 param set-default GF_ACTION 1
 param set-default NAV_RCL_ACT 1
-param set-default COM_POSCTL_NAVL 2

 # disable attitude failure detection
 param set-default FD_FAIL_P 0
@@ -26,7 +26,6 @@ param set-default TRIG_INTERFACE 3
 param set-default TRIG_MODE 4
 param set-default MNT_MODE_IN 4
 param set-default MNT_MODE_OUT 2
-param set-default MAV_PROTO_VER 2

 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 6
@@ -1,10 +1,21 @@
 #!/bin/sh
 #
-# @name 3DoF Spacecraft Model
+# @name KTH-ATMOS
 #
-# @type 2D Freeflyer with 8 thrusters - Planar motion
+# @type Free-Flyer
+# @class Spacecraft
 #
-# @maintainer Pedro Roque <padr@kth.se>
+# @output Motor1 back left thruster, +x thrust
+# @output Motor2 front left thruster, -x thrust
+# @output Motor3 back right thruster, +x thrust
+# @output Motor4 front right thruster, -x thrust
+# @output Motor5 front left thruster, +y thrust
+# @output Motor6 front right thruster, -y thrust
+# @output Motor7 back left thruster, +y thrust
+# @output Motor8 back right thruster, -y thrust
+#
+# @maintainer discower-io
+# @url https://atmos.discower.io
 #

 . ${R}etc/init.d/rc.sc_defaults
@@ -34,7 +45,6 @@ param set-default COM_LOW_BAT_ACT 0
 param set-default NAV_DLL_ACT 0
 param set-default GF_ACTION 1
 param set-default NAV_RCL_ACT 1
-param set-default COM_POSCTL_NAVL 2

 # disable attitude failure detection
 param set-default FD_FAIL_P 0
@@ -80,10 +80,8 @@ px4_add_romfs_files(
 	4009_gz_r1_rover
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
-	4012_gz_rover_ackermann
 	4013_gz_x500_lidar_2d
 	4014_gz_x500_mono_cam_down
-	4015_gz_r1_rover_mecanum
 	4016_gz_x500_lidar_down
 	4017_gz_x500_lidar_front
 	4018_gz_quadtailsitter
@@ -114,6 +112,8 @@ px4_add_romfs_files(
 	17002_flightgear_tf-g2

 	50000_gz_rover_differential
+	51000_gz_rover_ackermann
+	52000_gz_rover_mecanum

 	60002_gz_uuv_bluerov2_heavy

@@ -173,7 +173,6 @@ param set-default COM_RC_IN_MODE 1
 param set-default EKF2_REQ_GPS_H 0.5

 param set-default IMU_GYRO_FFT_EN 1
-param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets

 param set-default -s MC_AT_EN 1

@@ -324,6 +323,11 @@ fi

 uxrce_dds_client start -t udp -p $uxrce_dds_port $uxrce_dds_ns

+if param greater -s ZENOH_ENABLE 0
+then
+	zenoh start
+fi
+
 if param greater -s MNT_MODE_IN -1
 then
 	gimbal start
@@ -7,6 +7,10 @@
 #
 # @board px4_fmu-v2 exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6s exclude
+# @board ark_fmu-v6x exclude
+# @board auterion_fmu-v6x exclude
+# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 #
 # @maintainer Iain Galloway <iain.galloway@nxp.com>
@@ -7,6 +7,7 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 #

@@ -13,6 +13,11 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6s exclude
+# @board ark_fmu-v6x exclude
+# @board auterion_fmu-v6x exclude
+# @board px4_fmu-v6x exclude
+# @board px4_fmu-v6xrt exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -10,6 +10,7 @@
 # @board cuav_x7pro exclude
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 #

@@ -12,6 +12,7 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
@@ -10,6 +10,7 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
@@ -14,6 +14,7 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board diatone_mamba-f405-mk2 exclude
@@ -13,6 +13,7 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board auterion_fmu-v6x exclude
 # @board px4_fmu-v6x exclude
 # @board diatone_mamba-f405-mk2 exclude
 #
@@ -0,0 +1,31 @@
+#!/bin/sh
+#
+# @name NXP B3RB Rover Ackermann
+#
+# @type Rover
+# @class Rover
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.rover_ackermann_defaults
+
+param set-default BAT1_N_CELLS 3
+
+# Set geometry & output configration
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 101
+param set-default PWM_MAIN_FUNC3 101
+param set-default PWM_MAIN_DIS1 1500
+param set-default PWM_MAIN_DIS2 0
+param set-default PWM_MAIN_DIS3 1500
+param set-default PWM_MAIN_MIN1 1000
+param set-default PWM_MAIN_MIN2 2500
+param set-default PWM_MAIN_MIN3 0
+param set-default PWM_MAIN_MAX1 2000
+param set-default PWM_MAIN_MAX2 2500
+param set-default PWM_MAIN_MAX3 50
+param set-default PWM_MAIN_TIM0 400
+param set-default PWM_MAIN_TIM1 400
+param set-default PWM_MAIN_TIM2 20000
@@ -45,7 +45,6 @@ param set-default COM_LOW_BAT_ACT 0
 param set-default NAV_DLL_ACT 0
 param set-default GF_ACTION 1
 param set-default NAV_RCL_ACT 1
-param set-default COM_POSCTL_NAVL 2

 # disable attitude failure detection
 param set-default FD_FAIL_P 0
@@ -5,7 +5,17 @@
 # @type Free-Flyer
 # @class Spacecraft
 #
+# @output Motor1 back left thruster, +x thrust
+# @output Motor2 front left thruster, -x thrust
+# @output Motor3 back right thruster, +x thrust
+# @output Motor4 front right thruster, -x thrust
+# @output Motor5 front left thruster, +y thrust
+# @output Motor6 front right thruster, -y thrust
+# @output Motor7 back left thruster, +y thrust
+# @output Motor8 back right thruster, -y thrust
+#
 # @maintainer DISCOWER
+# @url https://atmos.discower.io
 #

 . ${R}etc/init.d/rc.sc_defaults
@@ -25,7 +35,6 @@ param set-default COM_LOW_BAT_ACT 0
 param set-default NAV_DLL_ACT 0
 param set-default GF_ACTION 1
 param set-default NAV_RCL_ACT 1
-param set-default COM_POSCTL_NAVL 2

 # Set Mocap Vision frame
 param set EKF2_EV_CTRL 15
@@ -153,6 +153,7 @@ if(CONFIG_MODULES_ROVER_ACKERMANN)
 		# [51000, 51999] Ackermann rovers
 		51000_generic_rover_ackermann
 		51001_axial_scx10_2_trail_honcho
+		51002_nxp_b3rb
 	)
 endif()

@@ -8,6 +8,9 @@
 #                 End Setup for board specific configurations.                #
 ###############################################################################

+#
+# Set SD logging mode
+#
 if param compare SDLOG_MODE 1
 then
 	set LOGGER_ARGS "${LOGGER_ARGS} -e"
@@ -28,8 +31,28 @@ then
 	set LOGGER_ARGS "${LOGGER_ARGS} -a"
 fi

+#
+# Set logging backend
+#
+if param compare SDLOG_BACKEND 1
+then
+	set LOGGER_ARGS "${LOGGER_ARGS} -m file"
+fi

-if ! param compare SDLOG_MODE -1
+if param compare SDLOG_BACKEND 2
+then
+	set LOGGER_ARGS "${LOGGER_ARGS} -m mavlink"
+fi
+
+if param compare SDLOG_BACKEND 3
+then
+	set LOGGER_ARGS "${LOGGER_ARGS} -m all"
+fi
+
+#
+# Start logger if any logging backend is enabled
+#
+if ! param compare SDLOG_BACKEND 0
 then
 	logger start -b ${LOGGER_BUF} -t ${LOGGER_ARGS}
 fi
@@ -237,6 +237,7 @@ then
 	qmc5883p -X -q start
 	rm3100 -X -q start
 	bmm350 -X -q start
+	iis2mdc -X -q start

 	# start last (wait for possible icm20948 passthrough mode)
 	ak09916 -X -q start
@@ -217,32 +217,39 @@ else
 	fi
 	unset BOARD_RC_DEFAULTS

-	# Load airframe configuration based on SYS_AUTOSTART parameter
-	if ! param compare SYS_AUTOSTART 0
+	#
+	# Optional additional init file: rc.additional_init
+	#
+	set BOARD_RC_ADDITIONAL_INIT ${R}etc/init.d/rc.additional_init
+	if [ -f $BOARD_RC_ADDITIONAL_INIT ]
 	then
-		# rc.autostart directly run the right airframe script which sets the VEHICLE_TYPE
-		# Look for airframe in ROMFS
-		. ${R}etc/init.d/rc.autostart
+		echo "Board additional init: ${BOARD_RC_ADDITIONAL_INIT}"
+		. $BOARD_RC_ADDITIONAL_INIT
+	fi
+	unset BOARD_RC_ADDITIONAL_INIT

-		if [ ${VEHICLE_TYPE} = none ]
-		then
-			# Use external startup file
-			if [ $STORAGE_AVAILABLE = yes ]
-			then
-				. ${R}etc/init.d/rc.autostart_ext
-			else
-				echo "ERROR [init] SD card not mounted - can't load external airframe"
-			fi
-		fi
+	# Load airframe configuration based on SYS_AUTOSTART parameter if successful VEHICLE_TYPE gets set
+	# Run autogenerated ROMFS airframe script
+	. ${R}etc/init.d/rc.autostart

-		if [ ${VEHICLE_TYPE} = none ]
+	if [ ${VEHICLE_TYPE} = none ]
+	then
+		# Run external airframe script on SD card
+		if [ $STORAGE_AVAILABLE = yes ]
 		then
-			echo "ERROR [init] No airframe file found for SYS_AUTOSTART value"
-			param set SYS_AUTOSTART 0
-			tune_control play error
+			. ${R}etc/init.d/rc.autostart_ext
+		else
+			echo "ERROR [init] SD not mounted, skipping external airframe"
 		fi
 	fi

+	if [ ${VEHICLE_TYPE} = none ]
+	then
+		echo "ERROR [init] No airframe file found for SYS_AUTOSTART value"
+		param set SYS_AUTOSTART 0
+		tune_control play error
+	fi
+
 	# Check parameter version and reset upon airframe configuration version mismatch.
 	# Reboot required because "param reset_all" would reset all "param set" lines from airframe.
 	if ! param compare SYS_PARAM_VER ${PARAM_DEFAULTS_VER}
@@ -15,4 +15,4 @@ ignore-exclude-errors-x
 lineend=linux
 exclude=EASTL
 add-brackets
-max-code-length=120
+max-code-length=140
@@ -39,4 +39,5 @@ exec find boards msg src platforms test \
    -path boards/modalai/voxl2/libfc-sensor-api -prune -o \
    -path src/drivers/actuators/vertiq_io/iq-module-communication-cpp -prune -o \
    -path src/lib/tensorflow_lite_micro/tflite_micro -prune -o \
+    -path src/drivers/ins/sbgecom/sbgECom -prune -o \
    \( -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) -print \) | grep $PATTERN
@@ -7,6 +7,7 @@ fi

 ssh_port=22
 ssh_user=root
+ssh_opts="-o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no"

 while getopts ":f:c:d:p:u:r" opt; do
 	case ${opt} in
@@ -67,7 +68,7 @@ target_file_name="update-dev.tar"
 if [ "$revert" == true ]; then
 	# revert to the release version which was originally deployed
 	cmd="cp $target_dir/update.tar $target_dir/$target_file_name"
-	ssh -t -p $ssh_port $ssh_user@$device "$cmd"
+	ssh $ssh_opts -t -p $ssh_port $ssh_user@$device "$cmd"
 else
 	# create custom update-dev.tar
 	tmp_dir="$(mktemp -d)"
@@ -105,11 +106,11 @@ else
 	$tar_name -C "$tmp_dir" --sort=name --owner=root:0 --group=root:0 --mtime='2019-01-01 00:00:00' -cvf $target_file_name $firmware_path $config_path

 	# send it to the target to start flashing
-	scp -P $ssh_port "$target_file_name" $ssh_user@"$device":$target_dir
+	scp $ssh_opts -P $ssh_port "$target_file_name" $ssh_user@"$device":$target_dir
 	popd &>/dev/null
 	rm -rf "$tmp_dir"
 fi

 # grab status output for flashing progress
 cmd="tail --follow=name $target_dir/update_status 2>/dev/null || true"
-ssh -t -p $ssh_port $ssh_user@$device "$cmd"
+ssh $ssh_opts -t -p $ssh_port $ssh_user@$device "$cmd"
@@ -191,7 +191,7 @@ def main():
                        cur_history_index = len(command_history)
                    mav_serialport.write(cur_line+'\n')
                    cur_line = ''
-                elif ord(ch) == 127: # backslash
+                elif ord(ch) == 8: # backspace
                    if len(cur_line) > 0:
                        erase_last_n_chars(1)
                        cur_line = cur_line[:-1]
@@ -238,6 +238,7 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
            ( 'disarmed', 'Disarmed', 'DIS', False ),
            ( 'min', 'Minimum', 'MIN', False ),
            ( 'max', 'Maximum', 'MAX', False ),
+            ( 'center', 'Center\n(for Servos)', 'CENT', False ),
            ( 'failsafe', 'Failsafe', 'FAIL', True ),
            ]
        for key, label, param_suffix, advanced in standard_params_array:
@@ -284,6 +284,9 @@ Note that non-motor outputs might already be active in prearm state if COM_PREAR
 '''
        minimum_description = \
 '''Minimum output value (when not disarmed).
+'''
+        center_description = \
+'''Servo Center output value (when not disarmed).
 '''
        maximum_description = \
 '''Maxmimum output value (when not disarmed).
@@ -296,6 +299,7 @@ When set to -1 (default), the value depends on the function (see {:}).
        standard_params_array = [
            ( 'disarmed', 'Disarmed', 'DIS', disarmed_description ),
            ( 'min', 'Minimum', 'MIN', minimum_description ),
+            ( 'center', 'Center', 'CENT', center_description ),
            ( 'max', 'Maximum', 'MAX', maximum_description ),
            ( 'failsafe', 'Failsafe', 'FAIL', failsafe_description ),
            ]
@@ -312,6 +316,10 @@ When set to -1 (default), the value depends on the function (see {:}).
                    standard_params[key]['default'] = -1
                    standard_params[key]['min'] = -1

+                if key == 'center':
+                    standard_params[key]['default'] = -1
+                    standard_params[key]['min'] = -1
+
                param = {
                    'description': {
                        'short': channel_label+' ${i} '+label+' Value',
@@ -49,14 +49,14 @@ for field in spec.parsed_fields():
            (package, name) = genmsg.names.package_resource_name(field.base_type)
            package = package or spec.package # convert '' to package

-            print('typedef px4_msg_%s px4_msg_px4__msg__%s;' % (name,name))
+            print('typedef px4_msgs_msg_%s px4_msgs_msg_px4_msgs__msg__%s;' % (name,name))
 }@



-typedef struct @uorb_struct px4_msg_@(file_base_name);
+typedef struct @uorb_struct px4_msgs_msg_@(file_base_name);

-extern const struct dds_cdrstream_desc px4_msg_@(file_base_name)_cdrstream_desc;
+extern const struct dds_cdrstream_desc px4_msgs_msg_@(file_base_name)_cdrstream_desc;

 #ifdef __cplusplus
 }
@@ -14,7 +14,6 @@ class AirframeGroup(object):
        self.af_class = af_class
        self.airframes = []

-
    def AddAirframe(self, airframe):
        """
        Add airframe to the airframe group
@@ -107,6 +106,8 @@ class AirframeGroup(object):
            return "Balloon"
        elif (self.type == "Vectored 6 DOF UUV"):
            return "Vectored6DofUUV"
+        elif self.type == "Free-Flyer":
+            return "FreeFlyer"
        return "AirframeUnknown"

    def GetAirframes(self):
@@ -6,6 +6,7 @@ future
 jinja2>=2.8
 jsonschema
 kconfiglib
+lark
 lxml
 matplotlib>=3.0
 numpy>=1.13
@@ -14,8 +15,8 @@ packaging
 pandas>=0.21
 pkgconfig
 psutil
+pycryptodome
 pygments
-wheel>=0.31.1
 pymavlink
 pyros-genmsg
 pyserial
@@ -24,7 +25,6 @@ pyyaml
 requests
 setuptools>=39.2.0
 six>=1.12.0
-toml>=0.9
 sympy>=1.10.1
-pycryptodome
-lark
+toml>=0.9
+wheel>=0.31.1
@@ -54,6 +54,22 @@ if [[ ! -f "${DIR}/${REQUIREMENTS_FILE}" ]]; then
 	return 1
 fi

+# Linux Mint compatibility: use upstream Ubuntu values
+if [ -r /etc/upstream-release/lsb-release ]; then
+    . /etc/upstream-release/lsb-release
+    UBUNTU_CODENAME="${DISTRIB_CODENAME:-${UBUNTU_CODENAME:-}}"
+    UBUNTU_RELEASE="${DISTRIB_RELEASE:-${UBUNTU_RELEASE:-}}"
+
+    lsb_release() {
+        if [ "$1" = "-cs" ]; then
+            printf '%s' "$UBUNTU_CODENAME"
+        elif [ "$1" = "-rs" ]; then
+            printf '%s' "$UBUNTU_RELEASE"
+        else
+            command lsb_release "$@"
+        fi
+    }
+fi

 # check ubuntu version
 # otherwise warn and point to docker?
@@ -25,10 +25,6 @@ except ImportError as e:
    sys.exit(1)


-SERVER = 'https://logs.px4.io'
-#SERVER = 'http://localhost:5006' # for testing locally
-UPLOAD_URL = SERVER+'/upload'
-
 quiet = False

 def ask_value(text, default=None):
@@ -60,6 +56,8 @@ def main():
    parser = ArgumentParser(description=__doc__)
    parser.add_argument('--quiet', '-q', dest='quiet', action='store_true', default=False,
            help='Quiet mode: do not ask for values which were not provided as parameters')
+    parser.add_argument('--server', dest='server', type=str, default='https://logs.px4.io',
+                      help='Server URL (default: https://logs.px4.io), use http://localhost:5006 for testing locally')
    parser.add_argument("--description", dest="description", type=str,
                      help="Log description", default=None)
    parser.add_argument("--feedback", dest="feedback", type=str,
@@ -99,6 +97,9 @@ def main():
    else:
        email = args.email

+    server = args.server
+    upload_url = server + '/upload'
+
    payload = {'type': args.type, 'description': description,
               'feedback': feedback, 'email': email, 'source': args.source}

@@ -113,13 +114,13 @@ def main():
            print('Uploading '+file_name+'...')

        with open(file_name, 'rb') as f:
-            r = requests.post(UPLOAD_URL, data=payload, files={'filearg': f},
+            r = requests.post(upload_url, data=payload, files={'filearg': f},
                    allow_redirects=False)
            if r.status_code == 302: # redirect
                if 'Location'  in r.headers:
                    plot_url = r.headers['Location']
                    if len(plot_url) > 0 and plot_url[0] == '/':
-                        plot_url = SERVER + plot_url
+                        plot_url = server + plot_url
                    print('URL: '+plot_url)


@@ -42,6 +42,7 @@ import os
 import argparse
 import re
 import sys
+import json

 try:
    import em
@@ -124,7 +125,7 @@ def generate_by_template(output_file, template_file, em_globals):
    return True


-def generate_topics_list_file_from_files(files, outputdir, template_filename, templatedir):
+def generate_topics_list_file_from_files(files, outputdir, template_filename, templatedir, rihs_path):
    # generate cpp file with topics list
    filenames = []
    for filename in [os.path.basename(p) for p in files if os.path.basename(p).endswith(".msg")]:
@@ -138,11 +139,27 @@ def generate_topics_list_file_from_files(files, outputdir, template_filename, te
    for filename in [os.path.basename(p) for p in files if os.path.basename(p).endswith(".msg")]:
        full_base_names.append(filename.replace(".msg",""))

-    topics = []
-    for msg_filename in files:
-        topics.extend(get_topics(msg_filename))
+    rihs01_hashes = dict()
+    if rihs_path != '':
+        for topic in full_base_names:
+            with open(rihs_path + "/msg/" + topic + ".json") as f:
+                d = json.load(f)
+                assert d['type_hashes'][0]['hash_string'][:7] == 'RIHS01_'

-    tl_globals = {"msgs": filenames, "topics": topics, "datatypes": datatypes, "full_base_names": full_base_names}
+                rihs01_hash = d['type_hashes'][0]['hash_string'][7:]
+
+                byte_array = [f"0x{rihs01_hash[i:i+2]}" for i in range(0, len(rihs01_hash), 2)]
+                c_code = f"{{ {', '.join(byte_array)} }};"
+                rihs01_hashes[topic] = c_code
+
+    topics = []
+    datatypes_with_topics = dict()
+    for msg_filename in files:
+        datatype = re.sub(r'(?<!^)(?=[A-Z])', '_', os.path.basename(msg_filename)).lower().replace(".msg","")
+        datatypes_with_topics[datatype] = get_topics(msg_filename)
+        topics.extend(datatypes_with_topics[datatype])
+
+    tl_globals = {"msgs": filenames, "topics": topics, "datatypes": datatypes, "full_base_names": full_base_names, "rihs01_hashes": rihs01_hashes, "datatypes_with_topics": datatypes_with_topics}
    tl_template_file = os.path.join(templatedir, template_filename)
    tl_out_file = os.path.join(outputdir, template_filename.replace(".em", ""))

@@ -162,13 +179,15 @@ if __name__ == "__main__":
    parser.add_argument('-p', dest='prefix', default='',
                        help='string added as prefix to the output file '
                        ' name when converting directories')
+    parser.add_argument('--rihs', dest='rihs', default='',
+                        help='path where rihs01 json files located')
    args = parser.parse_args()

    if args.zenoh_config:
-        generate_topics_list_file_from_files(args.file, args.outputdir, ZENOH_TEMPLATE_FILE[0], args.templatedir)
+        generate_topics_list_file_from_files(args.file, args.outputdir, ZENOH_TEMPLATE_FILE[0], args.templatedir, args.rihs)
        exit(0)
    elif args.zenoh_pub_sub:
-        generate_topics_list_file_from_files(args.file, args.outputdir, ZENOH_TEMPLATE_FILE[1], args.templatedir)
+        generate_topics_list_file_from_files(args.file, args.outputdir, ZENOH_TEMPLATE_FILE[1], args.templatedir, args.rihs)
        exit(0)
    else:
        print('Error: either --headers or --sources must be specified')
@@ -74,7 +74,7 @@ full_base_names.sort()

@[for idx, topic_name in enumerate(datatypes)]@
@{
-type_topic_count = len([e for e in topic_names_all if e.startswith(topic_name)])
+type_topic_count = len(datatypes_with_topics[topic_name])
 }@
 #ifdef CONFIG_ZENOH_PUBSUB_@(topic_name.upper())
 #  define CONFIG_ZENOH_PUBSUB_@(topic_name.upper())_COUNT @(type_topic_count)
@@ -88,9 +88,28 @@ type_topic_count = len([e for e in topic_names_all if e.startswith(topic_name)])
        CONFIG_ZENOH_PUBSUB_@(topic_name.upper())_COUNT + \
@[end for]        0

+@[for topic_name, rihs01_hash in rihs01_hashes.items()]@
+const uint8_t @(topic_name)_hash[32] = @(rihs01_hash)
+@[end for]
+
+@[for idx, topic_name in enumerate(datatypes)]@
+#ifdef CONFIG_ZENOH_PUBSUB_@(topic_name.upper())
+@{
+topic_names = datatypes_with_topics[topic_name]
+}@
+const orb_metadata* @(topic_name)_topic_meta[@(len(topic_names))] = {
+@[for topic_name_inst in topic_names]@
+	ORB_ID(@(topic_name_inst)),
+@[end for]};
+#endif
+@[end for]
+
 typedef struct {
+	const char *data_type_name;
 	const uint32_t *ops;
-	const orb_metadata* orb_meta;
+	const uint8_t *hash;
+	const orb_metadata** orb_topic;
+	const uint8_t orb_topics_size;
 } UorbPubSubTopicBinder;

 const UorbPubSubTopicBinder _topics[ZENOH_PUBSUB_COUNT] {
@@ -100,54 +119,95 @@ uorb_id_idx = 0
@[for idx, topic_name in enumerate(datatypes)]@
 #ifdef CONFIG_ZENOH_PUBSUB_@(topic_name.upper())
@{
-topic_names = [e for e in topic_names_all if e.startswith(topic_name)]
+topic_names = datatypes_with_topics[topic_name]
 }@
-@[for topic_name_inst in topic_names]@
 		{
-		  px4_msg_@(topic_dict[topic_name])_cdrstream_desc.ops.ops,
-		  ORB_ID(@(topic_name_inst))
+		  "@(topic_name)",
+		  px4_msgs_msg_@(topic_dict[topic_name])_cdrstream_desc.ops.ops,
+		  @(topic_dict[topic_name])_hash,
+		  @(topic_name)_topic_meta,
+		  @(len(topic_names)),
 		},
-@{
-uorb_id_idx += 1
-}@
-@[end for]#endif
+#endif
@[end for]
 };

-uORB_Zenoh_Publisher* genPublisher(const orb_metadata *meta) {
+uORB_Zenoh_Publisher* genPublisher(const orb_metadata *meta, int instance) {
    for (auto &pub : _topics) {
-        if(pub.orb_meta->o_id == meta->o_id) {
-            return new uORB_Zenoh_Publisher(meta, pub.ops);
+        for(int i = 0; i < pub.orb_topics_size; i++) {
+            if(pub.orb_topic[i]->o_id == meta->o_id) {
+                return new uORB_Zenoh_Publisher(meta, pub.ops, instance);
+            }
        }
    }
    return NULL;
 }


-uORB_Zenoh_Publisher* genPublisher(const char *name) {
+uORB_Zenoh_Publisher* genPublisher(const char *name, int instance) {
    for (auto &pub : _topics) {
-        if(strcmp(pub.orb_meta->o_name, name) == 0) {
-            return new uORB_Zenoh_Publisher(pub.orb_meta, pub.ops);
+        for(int i = 0; i < pub.orb_topics_size; i++) {
+            if(strcmp(pub.orb_topic[i]->o_name, name) == 0) {
+                return new uORB_Zenoh_Publisher(pub.orb_topic[i], pub.ops, instance);
+            }
        }
    }
    return NULL;
 }


-Zenoh_Subscriber* genSubscriber(const orb_metadata *meta) {
+Zenoh_Subscriber* genSubscriber(const orb_metadata *meta, int instance) {
    for (auto &sub : _topics) {
-        if(sub.orb_meta->o_id == meta->o_id) {
-            return new uORB_Zenoh_Subscriber(meta, sub.ops);
+        for(int i = 0; i < sub.orb_topics_size; i++) {
+            if(sub.orb_topic[i]->o_id == meta->o_id) {
+                return new uORB_Zenoh_Subscriber(meta, sub.ops, instance);
+            }
        }
    }
    return NULL;
 }


-Zenoh_Subscriber* genSubscriber(const char *name) {
+Zenoh_Subscriber* genSubscriber(const char *name, int instance) {
    for (auto &sub : _topics) {
-        if(strcmp(sub.orb_meta->o_name, name) == 0) {
-            return new uORB_Zenoh_Subscriber(sub.orb_meta, sub.ops);
+        for(int i = 0; i < sub.orb_topics_size; i++) {
+            if(strcmp(sub.orb_topic[i]->o_name, name) == 0) {
+                return new uORB_Zenoh_Subscriber(sub.orb_topic[i], sub.ops, instance);
+            }
+        }
+    }
+    return NULL;
+}
+
+const char* getTypeName(const char *name) {
+    for (auto &sub : _topics) {
+        for(int i = 0; i < sub.orb_topics_size; i++) {
+            if(strcmp(sub.orb_topic[i]->o_name, name) == 0) {
+                return sub.data_type_name;
+            }
+        }
+    }
+    return NULL;
+}
+
+
+const uint8_t* getRIHS01_Hash(const orb_metadata *meta) {
+    for (auto &sub : _topics) {
+        for(int i = 0; i < sub.orb_topics_size; i++) {
+            if(sub.orb_topic[i]->o_id == meta->o_id) {
+                return sub.hash;
+            }
+        }
+    }
+    return NULL;
+}
+
+const uint8_t* getRIHS01_Hash(const char *name) {
+    for (auto &sub : _topics) {
+        for(int i = 0; i < sub.orb_topics_size; i++) {
+            if(strcmp(sub.orb_topic[i]->o_name, name) == 0) {
+                return sub.hash;
+            }
        }
    }
    return NULL;
@@ -11,7 +11,6 @@ param set-default SENS_AFBR_HYSTER 1

 param set-default MAV_SYS_ID 158
 param set-default MAV_COMP_ID 158
-param set-default MAV_PROTO_VER 2

 param set-default MAV_0_MODE 14
 param set-default MAV_0_FORWARD 0
@@ -0,0 +1,5 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y
@@ -0,0 +1,37 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_BOOTLOADERS=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
+CONFIG_DRIVERS_SAFETY_BUTTON=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_UAVCANNODE_BEEP_COMMAND=y
+CONFIG_UAVCANNODE_GNSS_FIX=y
+CONFIG_UAVCANNODE_LIGHTS_COMMAND=y
+CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH=y
+CONFIG_UAVCANNODE_RTK_DATA=y
+CONFIG_UAVCANNODE_RAW_IMU=y
+CONFIG_UAVCANNODE_SAFETY_BUTTON=y
+CONFIG_UAVCANNODE_STATIC_PRESSURE=y
+CONFIG_UAVCANNODE_STATIC_TEMPERATURE=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -0,0 +1,13 @@
+{
+    "board_id": 90,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the ARK F9P GPS",
+    "image": "",
+    "build_time": 0,
+    "summary": "ARKF9PGPS",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 2080768,
+    "git_identity": "",
+    "board_revision": 0
+}
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default CBRK_IO_SAFETY 0
+param set-default CANNODE_SUB_MBD 1
+param set-default CANNODE_SUB_RTCM 1
+param set-default GPS_1_GNSS 63
+param set-default SENS_IMU_CLPNOTI 0
+
+safety_button start
+tone_alarm start
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# board sensors init
+#------------------------------------------------------------------------------
+gps start -d /dev/ttyS0 -p ubx
+
+icm42688p -R 0 -s start
+
+bmp388 -I -b 1 start
+
+iis2mdc -R 2 -I -b 1 start
@@ -0,0 +1,57 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/f9p-gps/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_STM32_TIM8=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,152 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/* HSI - 8 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - 8  MHz Crystal
+ * LSE - not installed
+ */
+#define STM32_BOARD_USEHSE      1
+#define STM32_BOARD_XTAL        8000000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+
+/* Main PLL Configuration */
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
+#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
+
+#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
+
+#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
+#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
+#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
+
+#define STM32_SYSCLK_FREQUENCY  96000000ul
+
+/* AHB clock (HCLK) is SYSCLK (96MHz) */
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK (96MHz) */
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* Timers driven from APB2 will be PCLK2 since no prescale division */
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
+#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
+
+/* Alternate function pin selections ************************************************/
+
+/* UARTs */
+#define GPIO_USART1_RX	GPIO_USART1_RX_2
+#define GPIO_USART1_TX	GPIO_USART1_TX_3
+
+#define GPIO_USART2_RX	GPIO_USART2_RX_1
+#define GPIO_USART2_TX	GPIO_USART2_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
+
+/* I2C */
+
+#define GPIO_MCU_I2C1_SCL
+#define GPIO_MCU_I2C1_SDA
+
+#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_1
+#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_1
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+#define GPIO_I2C2_SCL	GPIO_I2C2_SCL_1
+#define GPIO_I2C2_SDA	GPIO_I2C2_SDA_4
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+
+/* SPI */
+#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1
+
+#endif /* __ARCH_BOARD_BOARD_H */
@@ -0,0 +1,46 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_1   // DMA2, Stream 0, Channel 3
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 3, Channel 3
+#define DMACHAN_USART1_RX  DMAMAP_USART1_RX_1 // DMA2, Stream 2, Channel 4
+#define DMAMAP_USART1_RX   DMAMAP_USART1_RX_1
+//#define DMACHAN_USART1_TX  DMAMAP_USART1_TX   // DMA2, Stream 7, Channel 4
@@ -0,0 +1,153 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/f9p-gps/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_VARS=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_FLASH_PREFETCH=y
+CONFIG_STM32_FLOWCONTROL_BROKEN=y
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=y
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SPI1_DMA=y
+CONFIG_STM32_SPI1_DMA_BUFFER=1024
+CONFIG_STM32_TIM8=y
+CONFIG_STM32_USART1=y
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART_BREAKS=y
+CONFIG_STM32_WWDG=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=2000
+CONFIG_USART1_RXDMA=y
+CONFIG_USART1_TXBUFSIZE=2000
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_SERIAL_CONSOLE=y
+CONFIG_USART2_TXBUFSIZE=1100
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,134 @@
+/****************************************************************************
+ * nuttx-config/scripts/canbootloader_script.ld
+ *
+ *   Copyright (c) 2025 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
@@ -0,0 +1,146 @@
+/****************************************************************************
+ * scripts/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 928K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(8);
+		/*
+		* This section positions the app_descriptor_t used
+		* by the make_can_boot_descriptor.py tool to set
+		* the application image's descriptor so that the
+		* uavcan bootloader has the ability to validate the
+		* image crc, size etc
+		*/
+		KEEP(*(.app_descriptor))
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
@@ -0,0 +1,66 @@
+############################################################################
+#
+#   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
+
+	add_library(drivers_board
+		boot_config.h
+		boot.c
+		led.c
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch
+			nuttx_drivers
+			canbootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
+
+else()
+	add_library(drivers_board
+		can.c
+		i2c.cpp
+		init.c
+		led.c
+		spi.cpp
+	)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_spi
+			drivers__led # drv_led_start
+			nuttx_arch
+			nuttx_drivers
+			px4_layer
+	)
+endif()
@@ -0,0 +1,125 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * board internal definitions
+ */
+
+#pragma once
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+/* BUTTON */
+#define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)
+
+/* Safety LED */
+#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
+
+/* Tone alarm output. */
+#define TONE_ALARM_TIMER             2    /* timer 2 */
+#define TONE_ALARM_CHANNEL           1    /* channel 1 */
+#define GPIO_TONE_ALARM_IDLE  /* PA0  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
+#define GPIO_TONE_ALARM       /* PA0  */ (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN0)
+
+/* CAN  Silent mode control */
+#define GPIO_CAN1_SILENT_S0   /* PB12 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN12)
+
+/* CAN termination software control */
+#define GPIO_CAN1_TERMINATION /* PB13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
+#define GPIO_CAN_TERM                    GPIO_CAN1_TERMINATION
+
+/* ICM42688p FSYNC */
+#define GPIO_42688P_FSYNC     /* PB8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
+
+/* Boot config */
+#define GPIO_BOOT_CONFIG      /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
+
+/* LEDs are driven with open drain to support Anode to 5V or 3.3V */
+#define GPIO_TIM1_CH1         /* PA8  */ (GPIO_TIM1_CH1_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH2         /* PA9  */ (GPIO_TIM1_CH2_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH3         /* PA10 */ (GPIO_TIM1_CH3_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+
+#define GPIO_I2C1_SCL_RESET   /* PB6  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
+#define GPIO_I2C1_SDA_RESET   /* PB7  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN7)
+
+#define GPIO_I2C2_SCL_RESET   /* PB10 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_I2C2_SDA_RESET   /* PB9  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
+
+#define GPIO_I2C2_SCL_RESET   /* PB10 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_I2C2_SDA_RESET   /* PB9  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
+
+#define GPIO_USART1_RX_GPIO	(GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTB|GPIO_PIN3)
+#define GPIO_USART1_TX_GPIO	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN15)
+
+#define GPIO_USART2_RX_GPIO	(GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN3)
+#define GPIO_USART2_TX_GPIO	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN2)
+
+#define FLASH_BASED_PARAMS
+
+/* High-resolution timer */
+#define HRT_TIMER                    3  /* use timer 3 for the HRT */
+#define HRT_TIMER_CHANNEL            4  /* use capture/compare channel 4 */
+
+#define PX4_GPIO_INIT_LIST { \
+		GPIO_BTN_SAFETY,                  \
+		GPIO_LED_SAFETY,                  \
+		GPIO_I2C1_SCL_RESET,              \
+		GPIO_I2C1_SDA_RESET,              \
+		GPIO_I2C2_SCL_RESET,              \
+		GPIO_I2C2_SDA_RESET,              \
+		GPIO_42688P_FSYNC,                \
+		GPIO_BOOT_CONFIG,                 \
+		GPIO_CAN1_TX,                     \
+		GPIO_CAN1_RX,                     \
+		GPIO_CAN1_SILENT_S0,              \
+		GPIO_CAN1_TERMINATION,            \
+	}
+
+__BEGIN_DECLS
+
+#define BOARD_HAS_N_S_RGB_LED       1
+#define BOARD_MAX_LEDS              BOARD_HAS_N_S_RGB_LED
+
+#ifndef __ASSEMBLY__
+
+extern void stm32_spiinitialize(void);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS
@@ -0,0 +1,188 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *       Author: Ben Dyer <ben_dyer@mac.com>
+ *               Pavel Kirienko <pavel.kirienko@zubax.com>
+ *               David Sidrane <david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <px4_config.h>
+#include <stdint.h>
+#include "boot_config.h"
+#include "board.h"
+
+#include <debug.h>
+#include <string.h>
+#include <arch/board/board.h>
+
+#include <nuttx/board.h>
+#include "led.h"
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
+	stm32_configgpio(GPIO_CAN1_RX);
+	stm32_configgpio(GPIO_CAN1_TX);
+	stm32_configgpio(GPIO_CAN1_SILENT_S0);
+	stm32_configgpio(GPIO_CAN1_TERMINATION);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+
+#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
+	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
+#endif
+
+}
+
+/************************************************************************************
+ * Name: board_deinitialize
+ *
+ * Description:
+ *   This function is called by the bootloader code prior to booting
+ *   the application. Is should place the HW into an benign initialized state.
+ *
+ ************************************************************************************/
+
+void board_deinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+}
+
+/****************************************************************************
+ * Name: board_get_product_name
+ *
+ * Description:
+ *   Called to retrieve the product name. The returned value is a assumed
+ *   to be written to a pascal style string that will be length prefixed
+ *   and not null terminated
+ *
+ * Input Parameters:
+ *    product_name - A pointer to a buffer to write the name.
+ *    maxlen       - The maximum number of charter that can be written
+ *
+ * Returned Value:
+ *   The length of characters written to the buffer.
+ *
+ ****************************************************************************/
+
+uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
+{
+	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
+}
+
+/****************************************************************************
+ * Name: board_get_hardware_version
+ *
+ * Description:
+ *   Called to retrieve the hardware version information. The function
+ *   will first initialize the the callers struct to all zeros.
+ *
+ * Input Parameters:
+ *    hw_version - A pointer to a uavcan_hardwareversion_t.
+ *
+ * Returned Value:
+ *   Length of the unique_id
+ *
+ ****************************************************************************/
+
+size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
+{
+	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
+
+	hw_version->major = HW_VERSION_MAJOR;
+	hw_version->minor = HW_VERSION_MINOR;
+
+	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
+}
+
+/****************************************************************************
+ * Name: board_indicate
+ *
+ * Description:
+ *   Provides User feedback to indicate the state of the bootloader
+ *   on board specific  hardware.
+ *
+ * Input Parameters:
+ *    indication - A member of the uiindication_t
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
+
+typedef begin_packed_struct struct led_t {
+	uint8_t red;
+	uint8_t green;
+	uint8_t blue;
+	uint8_t hz;
+} end_packed_struct led_t;
+
+static const  led_t i2l[] = {
+
+	led(0, off,                             0,     0,     0,     0),
+	led(1, reset,                          128,   128,   128,   30),
+	led(2, autobaud_start,                  0,   128,     0,     1),
+	led(3, autobaud_end,                    0,   128,     0,     2),
+	led(4, allocation_start,                0,     0,    64,     2),
+	led(5, allocation_end,                  0,   128,    64,     3),
+	led(6, fw_update_start,                32,   128,    64,     3),
+	led(7, fw_update_erase_fail,           32,   128,    32,     3),
+	led(8, fw_update_invalid_response,     64,     0,     0,     1),
+	led(9, fw_update_timeout,              64,     0,     0,     2),
+	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
+	led(b, jump_to_app,                     0,   128,     0,    10),
+
+};
+
+void board_indicate(uiindication_t indication)
+{
+	rgb_led(i2l[indication].red,
+		i2l[indication].green,
+		i2l[indication].blue,
+		i2l[indication].hz);
+}
@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/*
+ * @file boot_config.h
+ *
+ * bootloader definitions that configures the behavior and options
+ * of the Boot loader
+ * This file is relies on the parent folder's boot_config.h file and defines
+ * different usages of the hardware for bootloading
+ */
+
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+/* Bring in the board_config.h definitions
+ * todo:make this be pulled in from a targed's build
+ * files in nuttx*/
+
+#include "board_config.h"
+#include "uavcan.h"
+#include <nuttx/compiler.h>
+
+#include <stdint.h>
+
+#include <stm32_flash.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
+
+//todo:wrap OPT_x in in ifdefs for command line definitions
+#define OPT_TBOOT_MS                    3000
+#define OPT_NODE_STATUS_RATE_MS         800
+#define OPT_NODE_INFO_RATE_MS           50
+#define OPT_BL_NUMBER_TIMERS            7
+
+/*
+ *  This Option set is set to 1 ensure a provider of firmware has an
+ *  opportunity update the node's firmware.
+ *  This Option is the default policy and can be overridden by
+ *  a jumper
+ *  When this Policy is set, the node will ignore tboot and
+ *  wait indefinitely for a GetNodeInfo request before booting.
+ *
+ *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
+ *  the polarity of the jumper to be True Active
+ *
+ *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
+ *                                                 Jumper
+ *   yes           1                       0         x
+ *   yes           1                       1       Active
+ *   no            1                       1       Not Active
+ *   no            0                       0         X
+ *   yes           0                       1       Active
+ *   no            0                       1       Not Active
+ *
+ */
+#define OPT_WAIT_FOR_GETNODEINFO                    0
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 1
+
+#define OPT_ENABLE_WD           1
+
+#define OPT_RESTART_TIMEOUT_MS          20000
+
+/* Reserved for the Booloader */
+#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
+
+/* Reserved for the application out of the total
+ * system flash minus the BOOTLOADER_SIZE_IN_K
+ */
+#define OPT_APPLICATION_RESERVER_IN_K    0
+
+#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
+#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
+
+
+#define FLASH_BASE              STM32_FLASH_BASE
+#define FLASH_SIZE              STM32_FLASH_SIZE
+
+#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
+#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
+#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
+
+/* If this board uses big flash that have large sectors */
+
+#define OPT_USE_YIELD
+
+/* Bootloader Option*****************************************************************
+ *
+ */
+#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)
@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_internal.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+#ifdef CONFIG_CAN
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+
+#endif
@@ -0,0 +1,39 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusInternal(1),
+	initI2CBusExternal(2),
+};
@@ -0,0 +1,168 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * board specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialization.
+ */
+
+#include <px4_platform_common/px4_config.h>
+#include <px4_platform_common/tasks.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+#include <syslog.h>
+
+#include <nuttx/board.h>
+
+#include <stm32.h>
+#include "board_config.h"
+#include "led.h"
+#include <stm32_uart.h>
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <drivers/drv_watchdog.h>
+
+#include <systemlib/px4_macros.h>
+
+#include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	watchdog_init();
+
+	/* configure pins */
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	// Configure SPI all interfaces GPIO & enable power.
+	stm32_spiinitialize();
+
+	// Check if button is held. If so go into gps passthrough mode
+	if (stm32_gpioread(GPIO_BTN_SAFETY)) {
+		rgb_led(128, 128, 128, 10);
+		stm32_configgpio(GPIO_USART1_TX_GPIO);
+		stm32_configgpio(GPIO_USART1_RX_GPIO);
+		stm32_configgpio(GPIO_USART2_TX_GPIO);
+		stm32_configgpio(GPIO_USART2_RX_GPIO);
+
+		while (1) {
+			watchdog_pet();
+			stm32_gpiowrite(GPIO_USART2_TX_GPIO, stm32_gpioread(GPIO_USART1_RX_GPIO));
+			stm32_gpiowrite(GPIO_USART1_TX_GPIO, stm32_gpioread(GPIO_USART2_RX_GPIO));
+		}
+	}
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	px4_platform_init();
+
+#if defined(SERIAL_HAVE_RXDMA)
+	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
+	static struct hrt_call serial_dma_call;
+	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
+#endif
+
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{2, 16 * 1024, 0x08008000},
+		{3, 16 * 1024, 0x0800C000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+	}
+
+#endif // FLASH_BASED_PARAMS
+
+	/* Configure the HW based on the manifest */
+	//px4_platform_configure();
+
+	return OK;
+}
@@ -0,0 +1,124 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "led.h"
+
+#define TMR_BASE        STM32_TIM1_BASE
+#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
+#define TMR_REG(o)      (TMR_BASE+(o))
+
+void rgb_led(int r, int g, int b, int freqs)
+{
+
+	long fosc = TMR_FREQUENCY;
+	long prescale = 2048;
+	long p1s = fosc / prescale;
+	long p0p5s  = p1s / 2;
+	uint16_t val;
+	static bool once = 0;
+
+	if (!once) {
+		once = 1;
+
+		/* Enabel Clock to Block */
+		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
+
+		/* Reload */
+
+		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
+		val |= ATIM_EGR_UG;
+		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
+
+		/* Set Prescaler STM32_TIM_SETCLOCK */
+
+		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
+
+		/* Enable STM32_TIM_SETMODE*/
+
+		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
+			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
+		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
+			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
+			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
+
+
+		stm32_configgpio(GPIO_TIM1_CH1);
+		stm32_configgpio(GPIO_TIM1_CH2);
+		stm32_configgpio(GPIO_TIM1_CH3);
+
+		/* master output enable = on */
+		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
+	}
+
+	long p  = freqs == 0 ? p1s : p1s / freqs;
+	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
+
+	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
+
+	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
+	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
+	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
+
+	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+	if (freqs == 0) {
+		val &= ~ATIM_CR1_CEN;
+
+	} else {
+		val |= ATIM_CR1_CEN;
+	}
+
+	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+}
@@ -0,0 +1,37 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *   Author: David Sidrane<david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+__BEGIN_DECLS
+void rgb_led(int r, int g, int b, int freqs);
+__END_DECLS
@@ -0,0 +1,44 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI1, {
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortB, GPIO::Pin0}, SPI::DRDY{GPIO::PortB, GPIO::Pin1}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);
@@ -0,0 +1,17 @@
+# UAVCAN boot loadable Module ID
+set(uavcanblid_sw_version_major ${PX4_VERSION_MAJOR})
+set(uavcanblid_sw_version_minor ${PX4_VERSION_MINOR})
+add_definitions(
+	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
+	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
+)
+
+set(uavcanblid_hw_version_major 0)
+set(uavcanblid_hw_version_minor 90)
+set(uavcanblid_name "\"org.ark.f9p-gps\"")
+
+add_definitions(
+	-DHW_UAVCAN_NAME=${uavcanblid_name}
+	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
+	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
+)
@@ -25,6 +25,8 @@ param set-default SENS_IMU_TEMP 10.0
 #param set-default SENS_IMU_TEMP_I 0.025
 #param set-default SENS_IMU_TEMP_P 1.0

+param set-default UAVCAN_ESC_IFACE 2
+
 if ver hwtypecmp ARKV6X000
 then
 	param set-default SENS_TEMP_ID 2818058
@@ -30,6 +30,8 @@ param set-default BAT1_V_DIV 21.0
 param set-default RC_CRSF_PRT_CFG 300
 param set-default RC_SBUS_PRT_CFG 0

+param set-default UAVCAN_ESC_IFACE 1
+
 param set-default IMU_GYRO_DNF_EN 3

 # Single IMU
@@ -0,0 +1,2 @@
+4001_quad_x
+4601_droneblocks_dexi_5
@@ -26,6 +26,8 @@ param set-default SENS_IMU_TEMP 10.0
 #param set-default SENS_IMU_TEMP_I 0.025
 #param set-default SENS_IMU_TEMP_P 1.0

+param set-default UAVCAN_ESC_IFACE 1
+
 if ver hwtypecmp ARKPI6X000
 then
 	# TODO: Add the correct sensor ID
@@ -0,0 +1,5 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y
@@ -0,0 +1,37 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_BOOTLOADERS=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
+CONFIG_DRIVERS_SAFETY_BUTTON=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_UAVCANNODE_BEEP_COMMAND=y
+CONFIG_UAVCANNODE_GNSS_FIX=y
+CONFIG_UAVCANNODE_LIGHTS_COMMAND=y
+CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH=y
+CONFIG_UAVCANNODE_RTK_DATA=y
+CONFIG_UAVCANNODE_RAW_IMU=y
+CONFIG_UAVCANNODE_SAFETY_BUTTON=y
+CONFIG_UAVCANNODE_STATIC_PRESSURE=y
+CONFIG_UAVCANNODE_STATIC_TEMPERATURE=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -0,0 +1,13 @@
+{
+    "board_id": 89,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the ARK X20 GPS",
+    "image": "",
+    "build_time": 0,
+    "summary": "ARKX20GPS",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 2080768,
+    "git_identity": "",
+    "board_revision": 0
+}
@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default CBRK_IO_SAFETY 0
+param set-default CANNODE_SUB_MBD 1
+param set-default CANNODE_SUB_RTCM 1
+param set-default GPS_1_GNSS 47
+param set-default SENS_IMU_CLPNOTI 0
+
+safety_button start
+tone_alarm start
@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# board sensors init
+#------------------------------------------------------------------------------
+gps start -d /dev/ttyS0 -p ubx
+
+icm42688p -R 0 -s start
+
+bmp388 -I -b 1 start
+
+iis2mdc -R 2 -I -b 1 start
@@ -0,0 +1,57 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/x20-gps/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_STM32_TIM8=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,152 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/* HSI - 8 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - 8  MHz Crystal
+ * LSE - not installed
+ */
+#define STM32_BOARD_USEHSE      1
+#define STM32_BOARD_XTAL        8000000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+
+/* Main PLL Configuration */
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
+#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
+
+#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
+
+#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
+#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
+#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
+
+#define STM32_SYSCLK_FREQUENCY  96000000ul
+
+/* AHB clock (HCLK) is SYSCLK (96MHz) */
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK (96MHz) */
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* Timers driven from APB2 will be PCLK2 since no prescale division */
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
+#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
+
+/* Alternate function pin selections ************************************************/
+
+/* UARTs */
+#define GPIO_USART1_RX	GPIO_USART1_RX_2
+#define GPIO_USART1_TX	GPIO_USART1_TX_3
+
+#define GPIO_USART2_RX	GPIO_USART2_RX_1
+#define GPIO_USART2_TX	GPIO_USART2_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
+
+/* I2C */
+
+#define GPIO_MCU_I2C1_SCL
+#define GPIO_MCU_I2C1_SDA
+
+#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_1
+#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_1
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+#define GPIO_I2C2_SCL	GPIO_I2C2_SCL_1
+#define GPIO_I2C2_SDA	GPIO_I2C2_SDA_4
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+
+/* SPI */
+#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1
+
+#endif /* __ARCH_BOARD_BOARD_H */
@@ -0,0 +1,46 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_1   // DMA2, Stream 0, Channel 3
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 3, Channel 3
+#define DMACHAN_USART1_RX  DMAMAP_USART1_RX_1 // DMA2, Stream 2, Channel 4
+#define DMAMAP_USART1_RX   DMAMAP_USART1_RX_1
+//#define DMACHAN_USART1_TX  DMAMAP_USART1_TX   // DMA2, Stream 7, Channel 4
--- a/Show More
+++ b/Show More