Fill out MISSION_CURRENT.mission_state over MAVlink

I'm not sure about all cases, this needs further clarification and testing.
MC att: clarify prioritization algorithm
2026-05-24 02:47:35 +08:00 · 2025-01-30 16:09:52 +01:00 · 2025-01-30 11:28:26 +01:00 · 2025-01-29 18:37:00 +01:00 · 2025-01-29 16:22:43 +01:00 · 2025-01-29 15:42:51 +01:00
525 changed files with 13076 additions and 3541 deletions
@@ -25,28 +25,27 @@ jobs:
          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
          "NO_NINJA_BUILD=1 px4_sitl_default",
          "px4_sitl_allyes",
-          "airframe_metadata",
          "module_documentation",
-          "parameters_metadata",
        ]
-    container:
-      image: px4io/px4-dev-nuttx-focal:2022-08-12
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0

-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: ${{matrix.check}}
-      run: make ${{matrix.check}}
-    - name: upload coverage
-      if: contains(matrix.check, 'coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: unittests
-        file: coverage/lcov.info
+      - name: Building [${{ matrix.check }}]
+        uses: addnab/docker-run-action@v3
+        with:
+          image: px4io/px4-dev-nuttx-focal:2022-08-12
+          options: -v ${{ github.workspace }}:/workspace
+          run: |
+            cd /workspace
+            git config --global --add safe.directory /workspace
+            make ${{ matrix.check }}
+
+      - name: Uploading Coverage to Codecov.io
+        if: contains(matrix.check, 'coverage')
+        uses: codecov/codecov-action@v1
+        with:
+          token: ${{ secrets.CODECOV_TOKEN }}
+          flags: unittests
+          file: coverage/lcov.info
@@ -11,13 +11,17 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-clang:2021-09-08
    steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
      with:
-        token: ${{secrets.ACCESS_TOKEN}}
+        fetch-depth: 0

-    - uses: corrupt952/actions-retry-command@v1.0.7
+    - name: Testing (clang-tidy-quiet)
+      uses: addnab/docker-run-action@v3
      with:
-        command: make clang-tidy-quiet
-        max_attempts: 3
+        image: px4io/px4-dev-clang:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make clang-tidy-quiet
@@ -19,13 +19,11 @@ jobs:
          ]
    steps:
    - name: install Python 3.10
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
      with:
        python-version: "3.10"

-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
+    - uses: actions/checkout@v4

    - name: setup
      run: ./Tools/setup/macos.sh; ./Tools/setup/macos.sh
@@ -37,7 +35,7 @@ jobs:
        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
        message("::set-output name=timestamp::${current_date}")
    - name: ccache cache files
-      uses: actions/cache@v2
+      uses: actions/cache@v4
      with:
        path: ~/.ccache
        key: macos_${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
@@ -17,7 +17,7 @@ on:
 jobs:
  build:
    name: Build and Push Container
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    steps:
      - uses: actions/checkout@v4
        with:
@@ -25,8 +25,14 @@ jobs:
          submodules: false
          fetch-depth: 0

+      - name: Set PX4 Tag
+        id: px4-tag
+        run: |
+          echo "tag=$(git describe --tags --match 'v[0-9]*')" >> $GITHUB_OUTPUT
+
      - name: Login to Docker Hub
        uses: docker/login-action@v3
+        if: github.event_name != 'pull_request'
        with:
          username: ${{ secrets.DOCKERHUB_USERNAME }}
          password: ${{ secrets.DOCKERHUB_TOKEN }}
@@ -44,16 +50,9 @@ jobs:
        with:
          images: |
            ghcr.io/PX4/px4-dev
-            px4io/px4-dev
+            ${{ (github.event_name != 'pull_request') && 'px4io/px4-dev' || '' }}
          tags: |
-            type=schedule
-            type=semver,pattern={{version}}
-            type=semver,pattern={{major}}.{{minor}}
-            type=semver,pattern={{major}}
-            type=ref,event=branch,suffix=-{{date 'YYYYMMDD'}},priority=600
-            type=ref,event=branch,suffix=,priority=500
-            type=ref,event=pr
-            type=sha
+            type=raw,enable=true,value=${{ steps.px4-tag.outputs.tag }},priority=1000

      - name: Set up Docker Buildx
        uses: docker/setup-buildx-action@v3
@@ -1,21 +1,28 @@
 name: EKF Change Indicator

-on: pull_request
+on:
+  pull_request:
+    branches:
+    - '*'

 jobs:
  unit_tests:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
    steps:
-    - uses: actions/checkout@v2.3.1
+    - uses: actions/checkout@v4
      with:
        fetch-depth: 0
-    - name: checkout newest version of branch
-      run: |
-        git fetch origin pull/${{github.event.pull_request.number}}/head:${{github.head_ref}}
-        git checkout ${GITHUB_HEAD_REF}
+
    - name: main test
-      run: make tests TESTFILTER=EKF
+      uses: addnab/docker-run-action@v3
+      with:
+        image: px4io/px4-dev-base-focal:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make tests TESTFILTER=EKF
+
    - name: Check if there is a functional change
      run: git diff --exit-code
      working-directory: src/modules/ekf2/test/change_indication
@@ -5,25 +5,40 @@ on: push
 jobs:
  unit_tests:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-base-focal:2021-09-08
    env:
      GIT_COMMITTER_EMAIL: bot@px4.io
      GIT_COMMITTER_NAME: PX4BuildBot
    steps:
-    - uses: actions/checkout@v2.3.1
+    - uses: actions/checkout@v4
      with:
        fetch-depth: 0
-    - name: main test updates change indication files
-      run: make tests TESTFILTER=EKF
+
+    - name: main test
+      uses: addnab/docker-run-action@v3
+      with:
+        image: px4io/px4-dev-base-focal:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make tests TESTFILTER=EKF
+
    - name: Check if there exists diff and save result in variable
-      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_ENV
+      id: diff-check
+      run: echo "CHANGE_INDICATED=$(git diff --exit-code --output=/dev/null || echo $?)" >> $GITHUB_OUTPUT
      working-directory: src/modules/ekf2/test/change_indication
+
    - name: auto-commit any changes to change indication
      uses: stefanzweifel/git-auto-commit-action@v4
      with:
-        commit_message: '[AUTO COMMIT] update change indication'
+        file_pattern: 'src/modules/ekf2/test/change_indication/*.csv'
        commit_user_name: ${GIT_COMMITTER_NAME}
        commit_user_email: ${GIT_COMMITTER_EMAIL}
-    - if: ${{env.CHANGE_INDICATED}}
-      name: if there is a functional change, fail check
+        commit_message: |
+          '[AUTO COMMIT] update change indication'
+
+          See .github/workflopws/ekf_update_change_indicator.yml for more details
+
+    - name: if there is a functional change, fail check
+      if: ${{ steps.diff-check.outputs.CHANGE_INDICATED }}
      run: exit 1
@@ -24,21 +24,23 @@ jobs:
      image: px4io/px4-dev-nuttx-focal:2022-08-12
      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+      - name: Install Node v20.18.0
+        uses: actions/setup-node@v4
+        with:
+          node-version: 20.18.0

-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: install emscripten
-      run: |
-        git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
-        cd _emscripten_sdk
-        ./emsdk install latest
-        ./emsdk activate latest
-    - name: ${{matrix.check}}
-      run: |
-        . ./_emscripten_sdk/emsdk_env.sh
-        make ${{matrix.check}}
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: Install empscripten
+        run: |
+          git clone https://github.com/emscripten-core/emsdk.git _emscripten_sdk
+          cd _emscripten_sdk
+          ./emsdk install latest
+          ./emsdk activate latest
+
+      - name: Testing [${{ matrix.check }}]
+        run: |
+          . ./_emscripten_sdk/emsdk_env.sh
+          make ${{ matrix.check }}
@@ -8,6 +8,10 @@ on:
    branches:
      - '*'

+env:
+  MIN_FLASH_POS_DIFF_FOR_COMMENT: 50
+  MIN_FLASH_NEG_DIFF_FOR_COMMENT: -50
+
 jobs:
  analyze_flash:
    name: Analyzing ${{ matrix.target }}
@@ -18,8 +22,10 @@ jobs:
      matrix:
        target: [px4_fmu-v5x, px4_fmu-v6x]
    outputs:
-      px4_fmu-v5x: ${{ steps.gen-output.outputs.output_px4_fmu-v5x }}
-      px4_fmu-v6x: ${{ steps.gen-output.outputs.output_px4_fmu-v6x }}
+      px4_fmu-v5x-bloaty-output: ${{ steps.gen-output.outputs.px4_fmu-v5x-bloaty-output }}
+      px4_fmu-v5x-bloaty-summary-map: ${{ steps.gen-output.outputs.px4_fmu-v5x-bloaty-summary-map }}
+      px4_fmu-v6x-bloaty-output: ${{ steps.gen-output.outputs.px4_fmu-v6x-bloaty-output }}
+      px4_fmu-v6x-bloaty-summary-map: ${{ steps.gen-output.outputs.px4_fmu-v6x-bloaty-summary-map }}
    steps:
      - uses: actions/checkout@v4
        with:
@@ -30,19 +36,20 @@ jobs:
        run: git config --system --add safe.directory '*'

      - name: Build Target
-        run: make ${{ matrix.target }}
+        run: make ${{ matrix.target }}_flash-analysis

      - name: Store the ELF with the change
-        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./with-change.elf
+        run: cp ./build/**/*.elf ./with-change.elf

      - name: Clean previous build
        run: |
          make clean
          make distclean

-      - name: If it's a PR checkout the base commit
+      - name: If it's a PR checkout the base branch
        if: ${{ github.event.pull_request }}
-        run: git checkout ${{ github.event.pull_request.base.sha }}
+        # As checkout creates a merge commit (merging the base branch into the PR branch), the base branch is the base for a diff of the PR changes.
+        run: git checkout ${{ github.event.pull_request.base.ref }}

      - name: If it's a push checkout the previous commit
        if: github.event_name == 'push'
@@ -52,30 +59,39 @@ jobs:
        run: make submodulesupdate

      - name: Build
-        run: make ${{ matrix.target }}
+        run: make ${{ matrix.target }}_flash-analysis

      - name: Store the ELF before the change
-        run: cp ./build/${{ matrix.target }}_default/${{ matrix.target }}_default.elf ./before-change.elf
+        run: cp ./build/**/*.elf ./before-change.elf

      - name: bloaty-action
-        uses: carlosperate/bloaty-action@v1.1.0
+        uses: PX4/bloaty-action@v1.0.0
        id: bloaty-step
        with:
-          bloaty-args: -d sections,compileunits -n 0 ./with-change.elf -- ./before-change.elf
+          bloaty-file-args: ./with-change.elf -- ./before-change.elf
+          bloaty-additional-args: -d sections,compileunits -s vm -n 20
          output-to-summary: true

      - name: Generate output
        id: gen-output
        run: |
          EOF=$(dd if=/dev/urandom bs=15 count=1 status=none | base64)
-          echo "output_${{ matrix.target }}<<$EOF" >> $GITHUB_OUTPUT
+          echo "${{ matrix.target }}-bloaty-output<<$EOF" >> $GITHUB_OUTPUT
          echo "${{ steps.bloaty-step.outputs.bloaty-output-encoded }}" >> $GITHUB_OUTPUT
          echo "$EOF" >> $GITHUB_OUTPUT
+          echo "${{ matrix.target }}-bloaty-summary-map<<$EOF" >> $GITHUB_OUTPUT
+          echo '${{ steps.bloaty-step.outputs.bloaty-summary-map }}' >> $GITHUB_OUTPUT
+          echo "$EOF" >> $GITHUB_OUTPUT

  post_pr_comment:
    name: Publish Results
    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
    needs: [analyze_flash]
+    env:
+      V5X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-absolute) }}
+      V5X-SUMMARY-MAP-PERC: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-summary-map).vm-percentage) }}
+      V6X-SUMMARY-MAP-ABS: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-summary-map).vm-absolute) }}
+      V6X-SUMMARY-MAP-PERC: ${{ fromJSON(fromJSON(needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-summary-map).vm-percentage) }}
    if: ${{ github.event.pull_request }}
    steps:
      - name: Find Comment
@@ -92,25 +108,32 @@ jobs:
          echo "timestamp=$(date +'%Y-%m-%dT%H:%M:%S')" >> $GITHUB_OUTPUT

      - name: Create or update comment
+        # This can't be moved to the job-level conditions, as GH actions don't allow a job-level if condition to access the env.
+        if: |
+          steps.fc.outputs.comment-id != '' ||
+          env.V5X-SUMMARY-MAP-ABS >= fromJSON(env.MIN_FLASH_POS_DIFF_FOR_COMMENT) ||
+          env.V5X-SUMMARY-MAP-ABS <= fromJSON(env.MIN_FLASH_NEG_DIFF_FOR_COMMENT) ||
+          env.V6X-SUMMARY-MAP-ABS >= fromJSON(env.MIN_FLASH_POS_DIFF_FOR_COMMENT) ||
+          env.V6X-SUMMARY-MAP-ABS <= fromJSON(env.MIN_FLASH_NEG_DIFF_FOR_COMMENT)
        uses: peter-evans/create-or-update-comment@v4
        with:
          comment-id: ${{ steps.fc.outputs.comment-id }}
          issue-number: ${{ github.event.pull_request.number }}
          body: |
-            ## FLASH Analysis
+            ## 🔎 FLASH Analysis
            <details>
-              <summary>px4_fmu-v5x</summary>
+              <summary>px4_fmu-v5x [Total VM Diff: ${{ env.V5X-SUMMARY-MAP-ABS }} byte (${{ env.V5X-SUMMARY-MAP-PERC}} %)]</summary>

              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v5x }}
+              ${{ needs.analyze_flash.outputs.px4_fmu-v5x-bloaty-output }}
              ```
            </details>

            <details>
-              <summary>px4_fmu-v6x</summary>
+              <summary>px4_fmu-v6x [Total VM Diff: ${{ env.V6X-SUMMARY-MAP-ABS }} byte (${{ env.V6X-SUMMARY-MAP-PERC }} %)]</summary>

              ```
-              ${{ needs.analyze_flash.outputs.px4_fmu-v6x }}
+              ${{ needs.analyze_flash.outputs.px4_fmu-v6x-bloaty-output }}
              ```
            </details>

@@ -11,131 +11,26 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
    strategy:
      fail-fast: false
      matrix:
        config:
-          - {vehicle: "iris",          mission: "MC_mission_box",  build_type: "RelWithDebInfo"}
-          - {vehicle: "rover",         mission: "rover_mission_1", build_type: "RelWithDebInfo"}
-          #- {vehicle: "plane",         mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
-          #- {vehicle: "plane_catapult",mission: "FW_mission_1",    build_type: "RelWithDebInfo"}
-          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "Coverage"}
-          #- {vehicle: "standard_vtol", mission: "VTOL_mission_1",  build_type: "AddressSanitizer"}
-          #- {vehicle: "tailsitter",    mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
-          #- {vehicle: "tiltrotor",     mission: "VTOL_mission_1",  build_type: "RelWithDebInfo"}
+          - {vehicle: "iris",          mission: "MC_mission_box"}
+          - {vehicle: "rover",         mission: "rover_mission_1"}

-    container:
-      image: px4io/px4-dev-ros-melodic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+        fetch-depth: 0

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
+    - name: Build SITL and Run Tests
+      uses: addnab/docker-run-action@v3
      with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
-      timeout-minutes: 45
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: coredump
-        path: px4.core
-
-    - name: ecl EKF analysis
-      if: always()
-      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_mission
-        file: coverage/lcov.info
+        image: px4io/px4-dev-ros-melodic:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make px4_sitl_default
+          make px4_sitl_default sitl_gazebo-classic
+          ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
@@ -17,120 +17,21 @@ jobs:
      fail-fast: false
      matrix:
        config:
-          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
-          #- {test_file: "mavros_posix_tests_offboard_attctl.test",    vehicle: "iris", build_type: "RelWithDebInfo"}
-          #- {test_file: "mavros_posix_tests_offboard_rpyrt_ctl.test", vehicle: "iris", build_type: "RelWithDebInfo"}
+          - {test_file: "mavros_posix_tests_offboard_posctl.test",    vehicle: "iris"}

-    container:
-      image: px4io/px4-dev-ros-melodic:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+        fetch-depth: 0

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
+    - name: Build PX4 and Run Tests
+      uses: addnab/docker-run-action@v3
      with:
-        path: ~/.ccache
-        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: check environment
-      run: |
-          export
-          ulimit -a
-    - name: Build PX4 and sitl_gazebo-classic
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        ccache -z
-        make px4_sitl_default
-        make px4_sitl_default sitl_gazebo-classic
-        ccache -s
-
-    - name: Core dump settings
-      run: |
-          ulimit -c unlimited
-          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-    - name: Run SITL tests
-      env:
-        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-      run: |
-        export
-        ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
-      timeout-minutes: 45
-
-    - name: Look at core files
-      if: failure()
-      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-    - name: Upload px4 coredump
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: coredump
-        path: px4.core
-
-    - name: ecl EKF analysis
-      if: always()
-      run: ./Tools/ecl_ekf/process_logdata_ekf.py ~/.ros/log/*/*.ulg || true
-
-    - name: Upload logs to flight review
-      if: always()
-      run: ./Tools/upload_log.py -q --description "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID}" --feedback "${GITHUB_WORKFLOW} ${GITHUB_RUN_ID} ${GITHUB_REPOSITORY} ${GITHUB_REF}" --source CI ~/.ros/log/*/*.ulg
-
-    - name: Upload px4 binary
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: binary
-        path: build/px4_sitl_default/bin/px4
-
-    - name: Store PX4 log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: px4_log
-        path: ~/.ros/log/*/*.ulg
-
-    - name: Store ROS log
-      if: failure()
-      uses: actions/upload-artifact@v3
-      with:
-        name: ros_log
-        path: ~/.ros/**/rostest-*.log
-
-    # Report test coverage
-    - name: Upload coverage
-      if: contains(matrix.config.build_type, 'Coverage')
-      run: |
-          git config --global credential.helper "" # disable the keychain credential helper
-          git config --global --add credential.helper store # enable the local store credential helper
-          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-          mkdir -p coverage
-          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-    - name: Upload coverage information to Codecov
-      if: contains(matrix.config.build_type, 'Coverage')
-      uses: codecov/codecov-action@v1
-      with:
-        token: ${{ secrets.CODECOV_TOKEN }}
-        flags: mavros_offboard
-        file: coverage/lcov.info
+        image: px4io/px4-dev-ros-melodic:2021-09-08
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          make px4_sitl_default
+          make px4_sitl_default sitl_gazebo-classic
+          ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
@@ -11,22 +11,27 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2022-08-12
    strategy:
      matrix:
        config: [
-          px4_fmu-v5,
+          px4_fmu-v5_default,
          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}

-    - name: make ${{matrix.config}}
-      env:
-        PX4_EXTRA_NUTTX_CONFIG: "CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
-      run: |
-        echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
-        make ${{matrix.config}} nuttx_context
-        # Check that the config option is set
-        grep CONFIG_NSH_LOGIN_PASSWORD build/${{matrix.config}}_default/NuttX/nuttx/.config
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+
+    - name: Build PX4 and Run Test [${{ matrix.config }}]
+      uses: addnab/docker-run-action@v3
+      with:
+        image: px4io/px4-dev-nuttx-focal:2022-08-12
+        options: -v ${{ github.workspace }}:/workspace
+        run: |
+          cd /workspace
+          git config --global --add safe.directory /workspace
+          export PX4_EXTRA_NUTTX_CONFIG="CONFIG_NSH_LOGIN_PASSWORD=\"test\";CONFIG_NSH_CONSOLE_LOGIN=y"
+          echo "PX4_EXTRA_NUTTX_CONFIG: $PX4_EXTRA_NUTTX_CONFIG"
+          make ${{ matrix.config }} nuttx_context
+          echo "Check that the config option is set"
+          grep CONFIG_NSH_LOGIN_PASSWORD build/${{ matrix.config }}/NuttX/nuttx/.config
@@ -12,14 +12,18 @@ jobs:
  build:
    runs-on: ubuntu-24.04
    steps:
-    - uses: actions/checkout@v1
+    - uses: actions/checkout@v4
      with:
-        token: ${{ secrets.ACCESS_TOKEN }}
+        fetch-depth: 0
+
    - name: Install Python3
      run: sudo apt-get install python3 python3-setuptools python3-pip -y
+
    - name: Install tools
      run: python3 -m pip install mypy types-requests flake8 --break-system-packages
+
    - name: Check MAVSDK test scripts with mypy
      run: $HOME/.local/bin/mypy --strict test/mavsdk_tests/*.py
+
    - name: Check MAVSDK test scripts with flake8
      run: $HOME/.local/bin/flake8 test/mavsdk_tests/*.py
@@ -166,6 +166,11 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_septentrio-gps_canbootloader
+    ark_teseo-gps_canbootloader:
+      short: ark_teseo-gps_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_teseo-gps_canbootloader
    ark_cannode_default:
      short: ark_cannode_default
      buildType: MinSizeRel
@@ -301,6 +306,11 @@ CONFIG:
      buildType: MiniSizeRel
      settings:
        CONFIG: matek_gnss-m9n-f4_default
+    micoair_h743_bootloader:
+      short: micoair_h743_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743_bootloader
    micoair_h743_default:
      short: micoair_h743
      buildType: MinSizeRel
@@ -316,6 +326,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: micoair_h743-aio_default
+    micoair_h743-v2_bootloader:
+      short: micoair_h743-v2_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-v2_bootloader
+    micoair_h743-v2_default:
+      short: micoair_h743-v2
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-v2_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -231,9 +231,13 @@ pipeline {
              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
              // 'main' branch
              sh('rm -f px4_msgs/msg/*.msg')
+              sh('rm -f px4_msgs/msg/versioned/*.msg')
              sh('rm -f px4_msgs/srv/*.srv')
+              sh('rm -f px4_msgs/srv/versioned/*.srv')
              sh('cp msg/*.msg px4_msgs/msg/')
+              sh('mkdir -p px4_msgs/msg/versioned && cp msg/versioned/*.msg px4_msgs/msg/versioned/')
              sh('cp srv/*.srv px4_msgs/srv/')
+              sh('mkdir -p px4_msgs/srv/versioned && cp srv/versioned/*.srv px4_msgs/srv/versioned/')
              sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
              sh('cd px4_msgs; git push origin main || true')
              sh('rm -rf px4_msgs')
@@ -344,6 +344,7 @@ bootloaders_update: \
 	matek_h743-slim_bootloader \
        micoair_h743_bootloader \
        micoair_h743-aio_bootloader \
+	micoair_h743-v2_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \
@@ -2,7 +2,7 @@

 [![Releases](https://img.shields.io/github/release/PX4/PX4-Autopilot.svg)](https://github.com/PX4/PX4-Autopilot/releases) [![DOI](https://zenodo.org/badge/22634/PX4/PX4-Autopilot.svg)](https://zenodo.org/badge/latestdoi/22634/PX4/PX4-Autopilot)

-[![Nuttx Targets](https://github.com/PX4/PX4-Autopilot/workflows/Nuttx%20Targets/badge.svg)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22Nuttx+Targets%22?branch=master) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)
+[![Build Targets](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml/badge.svg?branch=main)](https://github.com/PX4/PX4-Autopilot/actions/workflows/build_all_targets.yml) [![SITL Tests](https://github.com/PX4/PX4-Autopilot/workflows/SITL%20Tests/badge.svg?branch=master)](https://github.com/PX4/PX4-Autopilot/actions?query=workflow%3A%22SITL+Tests%22)

 [![Discord Shield](https://discordapp.com/api/guilds/1022170275984457759/widget.png?style=shield)](https://discord.gg/dronecode)

@@ -16,10 +16,6 @@ param set-default SENS_EN_GPSSIM 1
 param set-default SENS_EN_BAROSIM 1
 param set-default SENS_EN_MAGSIM 1

-# disable some checks to allow to fly:
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 # Square quadrotor X PX4 numbering
 param set-default CA_ROTOR_COUNT 4
 param set-default CA_ROTOR0_PX 1
@@ -38,4 +34,6 @@ param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104

+param set-default EKF2_GPS_DELAY 0
+
 param set SIH_VEHICLE_TYPE 0
@@ -16,12 +16,6 @@ param set-default SENS_EN_BAROSIM 1
 param set-default SENS_EN_MAGSIM 1
 param set-default SENS_EN_ARSPDSIM 1

-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 param set-default SIH_T_MAX 6
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
@@ -33,19 +27,22 @@ param set-default SIH_KDV 0.2
 param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
 param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)

-
 param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3

+# SIH for now hardcodes this configuration which we need to match in the airframe files.
 param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R -0.5
-param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
 param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3
+param set-default CA_SV_CS1_TYPE 3  # elevator
 param set-default CA_SV_CS2_TRQ_Y 1
-param set-default CA_SV_CS2_TYPE 4
-param set-default PWM_MAIN_FUNC3 201
-param set-default PWM_MAIN_FUNC4 202
-param set-default PWM_MAIN_FUNC5 203
-param set-default PWM_MAIN_FUNC6 101
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 202
+param set-default PWM_MAIN_FUNC3 203
+param set-default PWM_MAIN_FUNC4 101
+
+param set-default EKF2_GPS_DELAY 0
@@ -11,6 +11,7 @@
 PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}

+param set-default EKF2_GPS_DELAY 0
 param set-default EKF2_FUSE_BETA 0 # side slip fusion is currently not supported for tailsitters

 param set-default SENS_EN_GPSSIM 1
@@ -27,10 +28,6 @@ param set-default MC_PITCH_P 5

 param set-default MAV_TYPE 19

-# disable some checks to allow to fly:
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-
 param set-default SIH_T_MAX 2
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2
@@ -0,0 +1,96 @@
+#!/bin/sh
+#
+# @name SIH Standard VTOL
+#
+# @type Simulation
+# @class VTOL
+#
+# @output Motor1 MC motor front right
+# @output Motor2 MC motor back left
+# @output Motor3 MC motor front left
+# @output Motor4 MC motor back right
+# @output Motor5 Forward thrust motor
+# @output Servo1 Ailerons (single channel)
+# @output Servo2 Elevator
+# @output Servo3 Rudder
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=standard_vtol}
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 1
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 1
+
+param set-default EKF2_GPS_DELAY 0
+
+param set-default VT_TYPE 2
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR0_PX 0.2
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR1_PX -0.2
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_ROTOR2_PX 0.2
+param set-default CA_ROTOR2_PY -0.2
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.2
+param set-default CA_ROTOR3_PY 0.2
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_PX -0.3
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
+param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TYPE 3  # elevator
+param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 10
+param set-default FW_AIRSPD_MAX 12
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 201
+param set-default PWM_MAIN_FUNC6 202
+param set-default PWM_MAIN_FUNC7 203
+param set-default PWM_MAIN_FUNC8 105
+
+param set-default MAV_TYPE 22
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+# param set-default SYS_HITL 2
+
+param set-default SENS_DPRES_OFF 0.001
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.2
+
+# sih as standard vtol
+param set SIH_VEHICLE_TYPE 3
@@ -0,0 +1 @@
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
@@ -26,7 +26,6 @@ param set-default RD_MAX_THR_SPD 2.15
 param set-default RD_SPEED_P 0.1
 param set-default RD_SPEED_I 0.01
 param set-default RD_MAX_YAW_RATE 180
-param set-default RD_MISS_SPD_DEF 2
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
 param set-default RD_MAX_YAW_ACCEL 1000
@@ -29,7 +29,6 @@ param set-default RD_MAX_SPEED 8
 param set-default RD_YAW_P 5
 param set-default RD_YAW_I 0.1
 param set-default RD_MAX_YAW_RATE 30
-param set-default RD_MISS_SPD_DEF 8
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533

@@ -61,19 +60,25 @@ param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
 # controls in practical scenarios.

 # Cutter deck blades clutch, PCA9685 servo channel 3,  "RC FLAPS" (406) - leftmost switch, or "Servo 3" (203):
-param set-default SIM_GZ_SV_FUNC3 203
-param set-default SIM_GZ_SV_MIN3 0
-param set-default SIM_GZ_SV_MAX3 1000
-param set-default SIM_GZ_SV_DIS3 500
-param set-default SIM_GZ_SV_FAIL3 500
+param set-default SIM_GZ_SV_FUNC1 201
+param set-default SIM_GZ_SV_MIN1 0
+param set-default SIM_GZ_SV_MAX1 1000
+param set-default SIM_GZ_SV_DIS1 500
+param set-default SIM_GZ_SV_FAIL1 500
+param set-default SIM_GZ_SV_MAXA1 90
+param set-default SIM_GZ_SV_MINA1 -90

 # Gas engine throttle, PCA9685 servo channel 4, "RC AUX1" (407) - left knob, or "Servo 4" (204):
 #    - on minimum when disarmed or failed:
-param set-default SIM_GZ_SV_FUNC4 204
-param set-default SIM_GZ_SV_MIN4 0
-param set-default SIM_GZ_SV_MAX4 1000
-param set-default SIM_GZ_SV_DIS4 500
-param set-default SIM_GZ_SV_FAIL4 500
+param set-default SIM_GZ_SV_FUNC2 202
+param set-default SIM_GZ_SV_MIN2 0
+param set-default SIM_GZ_SV_MAX2 1000
+param set-default SIM_GZ_SV_DIS2 500
+param set-default SIM_GZ_SV_FAIL2 500
+param set-default SIM_GZ_SV_MAXA2 90
+param set-default SIM_GZ_SV_MINA2 -90
+
+param set-default CA_SV_CS_COUNT 2

 # Controlling PCA9685 servos 5,6,7,8 directly via "Servo 5..8" setting, by publishing actuator_servos.control[]:

@@ -47,5 +47,8 @@ param set-default SIM_GZ_WH_MAX1 200
 param set-default SIM_GZ_WH_DIS1 100

 # Steering
+param set-default SIM_GZ_SV_MAXA1 30
+param set-default SIM_GZ_SV_MINA1 -30
+param set-default CA_SV_CS_COUNT 1
 param set-default SIM_GZ_SV_FUNC1 201
 param set-default SIM_GZ_SV_REV 1
@@ -13,18 +13,18 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge

 # Rover parameters
 param set-default RM_WHEEL_TRACK 0.3
-param set-default RM_MAN_YAW_SCALE 0.1
-param set-default RM_YAW_RATE_I 0
-param set-default RM_YAW_RATE_P 0.01
+param set-default RM_YAW_RATE_I 0.1
+param set-default RM_YAW_RATE_P 0.1
 param set-default RM_MAX_ACCEL 3
+param set-default RM_MAX_DECEL 5
 param set-default RM_MAX_JERK 5
-param set-default RM_MAX_SPEED 4
-param set-default RM_MAX_THR_SPD 7
-param set-default RM_MAX_THR_YAW_R 7.5
+param set-default RM_MAX_SPEED 2
+param set-default RM_MAX_THR_SPD 2.2
+param set-default RM_MAX_THR_YAW_R 1.2
 param set-default RM_YAW_P 5
 param set-default RM_YAW_I 0.1
-param set-default RM_MAX_YAW_RATE 180
-param set-default RM_MISS_SPD_DEF 3
+param set-default RM_MAX_YAW_RATE 120
+param set-default RM_MAX_YAW_ACCEL 240
 param set-default RM_MISS_VEL_GAIN 1
 param set-default RM_SPEED_I 0.01
 param set-default RM_SPEED_P 0.1
@@ -42,23 +42,23 @@ param set-default SENS_EN_ARSPDSIM 0

 # Actuator mapping
 param set-default SIM_GZ_WH_FUNC1 102 # right wheel front
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
+param set-default SIM_GZ_WH_MIN1 70
+param set-default SIM_GZ_WH_MAX1 130
 param set-default SIM_GZ_WH_DIS1 100

 param set-default SIM_GZ_WH_FUNC2 101 # left wheel front
-param set-default SIM_GZ_WH_MIN2 0
-param set-default SIM_GZ_WH_MAX2 200
+param set-default SIM_GZ_WH_MIN2 70
+param set-default SIM_GZ_WH_MAX2 130
 param set-default SIM_GZ_WH_DIS2 100

 param set-default SIM_GZ_WH_FUNC3 104 # right wheel back
-param set-default SIM_GZ_WH_MIN3 0
-param set-default SIM_GZ_WH_MAX3 200
+param set-default SIM_GZ_WH_MIN3 70
+param set-default SIM_GZ_WH_MAX3 130
 param set-default SIM_GZ_WH_DIS3 100

 param set-default SIM_GZ_WH_FUNC4 103 # left wheel back
-param set-default SIM_GZ_WH_MIN4 0
-param set-default SIM_GZ_WH_MAX4 200
+param set-default SIM_GZ_WH_MIN4 70
+param set-default SIM_GZ_WH_MAX4 130
 param set-default SIM_GZ_WH_DIS4 100

 param set-default SIM_GZ_WH_REV 10
@@ -0,0 +1,97 @@
+#!/bin/sh
+#
+# @name Quadrotor + Tailsitter
+#
+# @type VTOL Quad Tailsitter
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadtailsitter}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 0
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 0
+
+
+param set-default MAV_TYPE 20
+
+param set-default CA_AIRFRAME 4
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.23
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.23
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.23
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.23
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 0
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+
+param set-default SIM_GZ_EC_MIN1 10
+param set-default SIM_GZ_EC_MIN2 10
+param set-default SIM_GZ_EC_MIN3 10
+param set-default SIM_GZ_EC_MIN4 10
+
+param set-default SIM_GZ_EC_MAX1 1500
+param set-default SIM_GZ_EC_MAX2 1500
+param set-default SIM_GZ_EC_MAX3 1500
+param set-default SIM_GZ_EC_MAX4 1500
+
+param set-default FD_FAIL_R 70
+
+param set-default FW_P_TC 0.6
+
+param set-default FW_PR_I 0.3
+param set-default FW_PR_P 0.5
+param set-default FW_PSP_OFF 2
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_I 0.1
+param set-default FW_RR_P 0.2
+param set-default FW_YR_FF 0 # make yaw rate controller very weak, only keep default P
+param set-default FW_YR_I 0
+param set-default FW_THR_TRIM 0.35
+param set-default FW_THR_MAX 0.8
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_CLMB_MAX 6
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 3
+param set-default FW_T_SINK_MIN 1.6
+param set-default FW_AIRSPD_STALL 10
+param set-default FW_AIRSPD_MIN 14
+param set-default FW_AIRSPD_TRIM 18
+param set-default FW_AIRSPD_MAX 22
+
+param set-default MC_AIRMODE 2
+param set-default MAN_ARM_GESTURE 0 # required for yaw airmode
+param set-default MC_ROLL_P 3
+param set-default MC_PITCH_P 3
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_PITCHRATE_P 0.3
+
+param set-default VT_ARSP_TRANS 15
+param set-default VT_B_TRANS_DUR 5
+param set-default VT_FW_DIFTHR_EN 7
+param set-default VT_FW_DIFTHR_S_Y 1
+param set-default VT_F_TRANS_DUR 1.5
+param set-default VT_TYPE 0
+
+param set-default WV_EN 0
+
+param set-default EKF2_FUSE_BETA 0
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Gazebo x500 gimbal
+#
+# @type Quadrotor
+#
+
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_gimbal}
+
+. ${R}etc/init.d-posix/airframes/4001_gz_x500
+
+# Gimbal settings
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_RC_IN_MODE 1
+
+param set-default MNT_MAN_ROLL 1
+param set-default MNT_MAN_PITCH 2
+param set-default MNT_MAN_YAW 3
+
+param set-default MNT_RANGE_ROLL 180
+param set-default MNT_RANGE_PITCH 180
+param set-default MNT_RANGE_YAW 720
@@ -0,0 +1,112 @@
+#!/bin/sh
+#
+# @name VTOL Tiltrotor
+#
+# @type VTOL Tiltrotor
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=tiltrotor}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default SENS_EN_GPSSIM 1
+param set-default SENS_EN_BAROSIM 0
+param set-default SENS_EN_MAGSIM 1
+param set-default SENS_EN_ARSPDSIM 0
+
+param set-default MAV_TYPE 21
+
+param set-default CA_AIRFRAME 3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR2_TILT 2
+param set-default CA_SV_TL0_MAXA 90
+param set-default CA_SV_TL0_MINA 0
+param set-default CA_SV_TL0_TD 0
+param set-default CA_SV_TL0_CT 1
+param set-default CA_SV_TL1_MAXA 90
+param set-default CA_SV_TL1_MINA 0
+param set-default CA_SV_TL1_TD 0
+param set-default CA_SV_TL1_CT 1
+
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_TL_COUNT 2
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+
+param set-default SIM_GZ_EC_MIN1 10
+param set-default SIM_GZ_EC_MIN2 10
+param set-default SIM_GZ_EC_MIN3 10
+param set-default SIM_GZ_EC_MIN4 10
+
+param set-default SIM_GZ_EC_MAX1 1500
+param set-default SIM_GZ_EC_MAX2 1500
+param set-default SIM_GZ_EC_MAX3 1500
+param set-default SIM_GZ_EC_MAX4 1500
+
+param set-default SIM_GZ_SV_FUNC1 201
+param set-default SIM_GZ_SV_FUNC2 202
+param set-default SIM_GZ_SV_FUNC3 203
+param set-default SIM_GZ_SV_FUNC4 204
+param set-default SIM_GZ_SV_FUNC5 205
+
+param set-default SIM_GZ_SV_MAXA4 90
+param set-default SIM_GZ_SV_MINA4 0
+param set-default SIM_GZ_SV_MAXA5 90
+param set-default SIM_GZ_SV_MINA5 0
+
+param set-default NPFG_PERIOD 12
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_TRIM 0.38
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default MC_AIRMODE 1
+param set-default MC_YAWRATE_P 0.4
+param set-default MC_YAWRATE_I 0.1
+
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_FWD_THRUST_SC 0.6
+param set-default VT_TILT_TRANS 0.6
+param set-default VT_TYPE 1
@@ -49,6 +49,7 @@ px4_add_romfs_files(
 	1022_gazebo-classic_uuv_bluerov2_heavy
 	1030_gazebo-classic_plane
 	1031_gazebo-classic_plane_cam
+	1031_gazebo-classic_plane_cam.post
 	1032_gazebo-classic_plane_catapult
 	1033_jsbsim_rascal
 	1034_flightgear_rascal-electric
@@ -89,6 +90,9 @@ px4_add_romfs_files(
 	4015_gz_r1_rover_mecanum
 	4016_gz_x500_lidar_down
 	4017_gz_x500_lidar_front
+	4018_gz_quadtailsitter
+	4019_gz_x500_gimbal
+	4020_gz_tiltrotor

 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post
@@ -105,6 +109,7 @@ px4_add_romfs_files(
 	10040_sihsim_quadx
 	10041_sihsim_airplane
 	10042_sihsim_xvert
+	10043_sihsim_standard_vtol

 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2
@@ -4,6 +4,9 @@
 # Simulator IMU data provided at 250 Hz
 param set-default IMU_INTEG_RATE 250

+# For simulation, allow registering modes while armed for developer convenience
+param set-default COM_MODE_ARM_CHK 1
+
 if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then

 	echo "INFO  [init] SIH simulator"
@@ -33,6 +36,10 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		then
 			sensor_mag_sim start
 		fi
+		if param compare -s SENS_EN_AGPSIM 1
+		then
+			sensor_agp_sim start
+		fi

 	else
 		echo "ERROR [init] simulator_sih failed to start"
@@ -153,6 +160,10 @@ elif [ "$PX4_SIMULATOR" = "gz" ] || [ "$(param show -q SIM_GZ_EN)" = "1" ]; then
 	then
 		sensor_airspeed_sim start
 	fi
+	if param compare -s SENS_EN_AGPSIM 1
+	then
+		sensor_agp_sim start
+	fi

 elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "10017" ]; then

@@ -153,8 +153,6 @@ fi

 param set-default BAT1_N_CELLS 4

-param set-default CBRK_SUPPLY_CHK 894281
-
 # disable check, no CPU load reported on posix yet
 param set-default COM_CPU_MAX -1
 param set-default COM_RAM_MAX -1
@@ -247,6 +245,8 @@ then
 	battery_simulator start
 fi

+system_power_simulator start
+
 tone_alarm start
 rc_update start
 manual_control start
@@ -5,6 +5,15 @@
 # @type Standard VTOL
 # @class VTOL
 #
+# @output Motor1 MC motor front right
+# @output Motor2 MC motor back left
+# @output Motor3 MC motor front left
+# @output Motor4 MC motor back right
+# @output Motor5 Forward thrust motor
+# @output Servo1 Aileron
+# @output Servo2 Elevator
+# @output Servo3 Rudder
+#
 # @maintainer Roman Bapst <roman@auterion.com>
 #
 # @board px4_fmu-v2 exclude
@@ -12,28 +12,25 @@

 . ${R}etc/init.d/rc.fw_defaults

-
 param set UAVCAN_ENABLE 0

 param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10

-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
+param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TYPE 3  # elevator
+param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set HIL_ACT_FUNC1 201
+param set HIL_ACT_FUNC2 202
+param set HIL_ACT_FUNC3 203
+param set HIL_ACT_FUNC4 101

 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2
@@ -0,0 +1,92 @@
+#!/bin/sh
+#
+# @name SIH Standard VTOL QuadPlane
+#
+# @type Simulation
+# @class VTOL
+#
+# @output Motor1 MC motor front right
+# @output Motor2 MC motor back left
+# @output Motor3 MC motor front left
+# @output Motor4 MC motor back right
+# @output Motor5 Forward thrust motor
+# @output Servo1 Ailerons (single channel)
+# @output Servo2 Elevator
+# @output Servo3 Rudder
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set UAVCAN_ENABLE 0
+
+param set-default VT_TYPE 2
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default CA_AIRFRAME 2
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR0_PX 0.2
+param set-default CA_ROTOR0_PY 0.2
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR1_PX -0.2
+param set-default CA_ROTOR1_PY -0.2
+param set-default CA_ROTOR2_PX 0.2
+param set-default CA_ROTOR2_PY -0.2
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.2
+param set-default CA_ROTOR3_PY 0.2
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_PX -0.3
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR4_AX 1
+param set-default CA_ROTOR4_AZ 0
+
+# SIH for now hardcodes this configuration which we need to match in the airframe files.
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 1
+param set-default CA_SV_CS0_TYPE 15  # single channel aileron
+param set-default CA_SV_CS1_TRQ_P 1
+param set-default CA_SV_CS1_TYPE 3  # elevator
+param set-default CA_SV_CS2_TRQ_Y 1
+param set-default CA_SV_CS2_TYPE 4  # rudder
+
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 10
+param set-default FW_AIRSPD_MAX 12
+
+param set-default HIL_ACT_FUNC1 101
+param set-default HIL_ACT_FUNC2 102
+param set-default HIL_ACT_FUNC3 103
+param set-default HIL_ACT_FUNC4 104
+param set-default HIL_ACT_FUNC5 201
+param set-default HIL_ACT_FUNC6 202
+param set-default HIL_ACT_FUNC7 203
+param set-default HIL_ACT_FUNC8 105
+
+param set-default MAV_TYPE 22
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+param set-default SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+
+param set-default SENS_DPRES_OFF 0.001
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.2
+
+# sih as standard vtol
+param set SIH_VEHICLE_TYPE 3
@@ -21,7 +21,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-
 param set-default MAV_TYPE 14

 param set-default CA_ROTOR_COUNT 8
@@ -11,7 +11,6 @@

 . ${R}etc/init.d/rc.heli_defaults

-
 # Disable PID gains for initial setup. These should be enabled after setting the FF gain.
 # P is expected to be lower than FF.
 param set-default MC_ROLLRATE_P 0
@@ -22,7 +22,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-
 param set-default BAT1_CAPACITY 2500
 param set-default BAT1_N_CELLS 3

@@ -41,7 +40,6 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20

-
 param set-default CA_AIRFRAME 1

 param set-default CA_ROTOR_COUNT 1
@@ -20,7 +20,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-
 param set-default BAT1_CAPACITY 3300
 param set-default BAT1_N_CELLS 3

@@ -19,7 +19,6 @@ param set-default NAV_ACC_RAD 2
 param set-default RTL_DESCEND_ALT 10
 param set-default RTL_RETURN_ALT 30

-
 param set-default CA_ROTOR_COUNT 12
 # Bottom motors
 param set-default CA_ROTOR0_PX 0
@@ -21,7 +21,6 @@ param set-default MC_PITCHRATE_P 0.08
 param set-default MC_PITCHRATE_D 0.001
 param set-default MC_YAW_P 4

-
 param set-default MC_ROLLRATE_MAX 1600
 param set-default MC_PITCHRATE_MAX 1600
 param set-default MC_YAWRATE_MAX 1000
@@ -38,7 +38,6 @@ param set-default COM_FLTMODE5 -1
 param set-default COM_FLTMODE6  1
 param set-default COM_RC_LOSS_T 3

-
 # ekf2
 param set-default EKF2_BARO_NOISE 2

@@ -79,19 +78,16 @@ param set-default EKF2_RNG_POS_Z 0.033

 param set-default EKF2_TERR_NOISE 1

-
 # Maximum allowed angle velocity in the landed state
 param set-default LNDMC_ROT_MAX 40

 # Maximum vertical velocity allowed in the landed state
 param set-default LNDMC_Z_VEL_MAX 0.7

-
 # filtering
 param set-default IMU_DGYRO_CUTOFF 50
 param set-default IMU_GYRO_CUTOFF 65

-
 # Pitch angle & rate setting
 param set-default MC_PITCHRATE_P 0.075
 param set-default MC_PITCHRATE_I 0.1
@@ -148,7 +144,6 @@ param set-default RC_MAP_RETURN_SW  7

 param set-default RC1_TRIM          1000

-
 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
@@ -30,7 +30,6 @@ param set-default IMU_DGYRO_CUTOFF 90
 param set-default IMU_GYRO_CUTOFF 100

 # System
-
 param set-default SENS_BOARD_ROT 10

 # EKF2
@@ -18,7 +18,6 @@
 #
 . ${R}etc/init.d/rc.mc_defaults

-
 param set-default SYS_HAS_MAG 0
 param set-default EKF2_OF_CTRL 1
 param set-default EKF2_GPS_CTRL 0
@@ -85,6 +84,5 @@ param set-default PWM_MAIN_MAX3 255

 param set-default SENS_FLOW_MINRNG 0.05

-
 syslink start
 mavlink start -d /dev/bridge0 -b 57600 -m osd -r 40000
@@ -31,7 +31,6 @@ param set-default RD_MAX_THR_SPD 1.9
 param set-default RD_MAX_THR_YAW_R 0.7
 param set-default RD_MAX_YAW_ACCEL 600
 param set-default RD_MAX_YAW_RATE 250
-param set-default RD_MISS_SPD_DEF 1.5
 param set-default RD_SPEED_P 0.1
 param set-default RD_SPEED_I 0.01
 param set-default RD_TRANS_DRV_TRN 0.785398
@@ -41,7 +40,6 @@ param set-default RD_YAW_I 0.1
 param set-default RD_YAW_RATE_P 0.1
 param set-default RD_YAW_RATE_I 0.01

-
 # Pure pursuit parameters
 param set-default PP_LOOKAHD_MAX 10
 param set-default PP_LOOKAHD_MIN 1
@@ -15,7 +15,6 @@

 . ${R}etc/init.d/rc.rover_defaults

-
 param set-default BAT1_N_CELLS 2

 param set-default EKF2_ANGERR_INIT 0.01
@@ -22,7 +22,6 @@

 . ${R}etc/init.d/rc.uuv_defaults

-
 param set-default MAV_1_CONFIG 102

 param set-default BAT1_A_PER_V 37.8798
@@ -48,6 +48,7 @@ if(CONFIG_MODULES_SIMULATION_PWM_OUT_SIM)
 		1100_rc_quad_x_sih.hil
 		1101_rc_plane_sih.hil
 		1102_tailsitter_duo_sih.hil
+		1103_standard_vtol_sih.hil
 	)
 endif()

@@ -13,8 +13,6 @@ param set-default MAV_TYPE 1
 #
 # Default parameters for fixed wing UAVs.
 #
-param set-default COM_POS_FS_DELAY 5
-
 # there is a 2.5 factor applied on the _FS thresholds if for invalidation
 param set-default COM_POS_FS_EPH 50
 param set-default COM_VEL_FS_EVH 3
@@ -26,7 +24,6 @@ param set-default COM_DISARM_PRFLT -1

 param set-default EKF2_ARSP_THR 8
 param set-default EKF2_FUSE_BETA 1
-param set-default EKF2_GPS_CHECK 21
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_REQ_EPH 10
 param set-default EKF2_REQ_EPV 10
@@ -12,6 +12,7 @@ param set-default MAV_TYPE 4

 param set-default COM_PREARM_MODE 2
 param set-default COM_SPOOLUP_TIME 10
+param set-default COM_DISARM_PRFLT 60

 # No need for minimum collective pitch (or airmode) to keep torque authority
 param set-default MPC_MANTHR_MIN 0
@@ -21,3 +21,6 @@ param set-default RTL_RETURN_ALT 30
 param set-default RTL_DESCEND_ALT 10

 param set-default GPS_UBX_DYNMODEL 6
+
+# lower RNG_FOG since MC are expected to fly closer over obstacles
+param set-default EKF2_RNG_FOG 1.0
@@ -211,6 +211,13 @@ then
 	spl06 -X -a 0x77 start
 fi

+# SPA06 sensor external I2C
+if param compare -s SENS_EN_SPA06 1
+then
+	spa06 -X start
+	spa06 -X -a 0x77 start
+fi
+
 # PCF8583 counter (RPM sensor)
 if param compare -s SENS_EN_PCF8583 1
 then
@@ -302,6 +302,75 @@ else
 		. $FCONFIG
 	fi

+
+	#
+	# Sensors System (start before Commander so Preflight checks are properly run).
+	#
+	if param greater SYS_HITL 0
+	then
+		sensors start -h
+
+		# disable GPS
+		param set GPS_1_CONFIG 0
+
+		# start the simulator in hardware if needed
+		if param compare SYS_HITL 2
+		then
+			simulator_sih start
+			sensor_baro_sim start
+			sensor_mag_sim start
+			sensor_gps_sim start
+			sensor_agp_sim start
+		fi
+
+	else
+		#
+		# board sensors: rc.sensors
+		#
+		set BOARD_RC_SENSORS ${R}etc/init.d/rc.board_sensors
+		if [ -f $BOARD_RC_SENSORS ]
+		then
+			echo "Board sensors: ${BOARD_RC_SENSORS}"
+			. $BOARD_RC_SENSORS
+		fi
+		unset BOARD_RC_SENSORS
+
+		. ${R}etc/init.d/rc.sensors
+
+		if param compare -s BAT1_SOURCE 2
+		then
+			esc_battery start
+		fi
+
+		if ! param compare BAT1_SOURCE 1
+		then
+			battery_status start
+		fi
+
+		sensors start
+	fi
+
+	#
+	# state estimator selection
+	#
+	if param compare -s EKF2_EN 1
+	then
+		ekf2 start &
+	fi
+
+	if param compare -s LPE_EN 1
+	then
+		local_position_estimator start
+	fi
+
+	if param compare -s ATT_EN 1
+	then
+		attitude_estimator_q start
+	fi
+
+	#
+	# px4io
+	#
 	if px4io supported
 	then
 	# Check if PX4IO present and update firmware if needed.
@@ -354,6 +423,11 @@ else
 	then
 		pps_capture start
 	fi
+	# RPM capture driver
+	if param greater -s RPM_CAP_ENABLE 0
+	then
+		rpm_capture start
+	fi
 	# Camera capture driver
 	if param greater -s CAM_CAP_FBACK 0
 	then
@@ -364,78 +438,24 @@ else
 	fi

 	#
-	# Sensors System (start before Commander so Preflight checks are properly run).
-	# Commander needs to be this early for in-air-restarts.
+	# Commander
 	#
 	if param greater SYS_HITL 0
 	then
+		commander start -h
+
 		if ! pwm_out_sim start -m hil
 		then
 			tune_control play error
 		fi

-		sensors start -h
-		commander start -h
-		# disable GPS
-		param set GPS_1_CONFIG 0
-
-		# start the simulator in hardware if needed
-		if param compare SYS_HITL 2
-		then
-			simulator_sih start
-			sensor_baro_sim start
-			sensor_mag_sim start
-			sensor_gps_sim start
-		fi
-
 	else
-		#
-		# board sensors: rc.sensors
-		#
-		set BOARD_RC_SENSORS ${R}etc/init.d/rc.board_sensors
-		if [ -f $BOARD_RC_SENSORS ]
-		then
-			echo "Board sensors: ${BOARD_RC_SENSORS}"
-			. $BOARD_RC_SENSORS
-		fi
-		unset BOARD_RC_SENSORS
-
-		. ${R}etc/init.d/rc.sensors
-
-		if param compare -s BAT1_SOURCE 2
-		then
-			esc_battery start
-		fi
-
-		if ! param compare BAT1_SOURCE 1
-		then
-			battery_status start
-		fi
-
-		sensors start
 		commander start

 		dshot start
 		pwm_out start
 	fi

-	#
-	# state estimator selection
-	if param compare -s EKF2_EN 1
-	then
-		ekf2 start &
-	fi
-
-	if param compare -s LPE_EN 1
-	then
-		local_position_estimator start
-	fi
-
-	if param compare -s ATT_EN 1
-	then
-		attitude_estimator_q start
-	fi
-
 	#
 	# Configure vehicle type specific parameters.
 	# Note: rc.vehicle_setup is the entry point for all vehicle type specific setup.
@@ -43,7 +43,7 @@ fi

 # install git pre-commit hook
 HOOK_FILE="$DIR/../../.git/hooks/pre-commit"
-if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ]; then
+if [ ! -f $HOOK_FILE ] && [ "$CI" != "true" ] && [ $- == *i* ]; then
 	echo ""
 	echo -e "\033[31mNinja tip: add a git pre-commit hook to automatically check code style\033[0m"
 	echo -e "Would you like to install one now? (\033[94mcp ./Tools/astyle/pre-commit .git/hooks/pre-commit\033[0m): [y/\033[1mN\033[0m]"
@@ -73,7 +73,7 @@ def process_target(px4board_file, target_name):
        px4board_file.endswith("bootloader.px4board"):
        kconf.load_config(px4board_file, replace=True)
    else: # Merge config with default.px4board
-        default_kconfig = re.sub(r'[a-zA-Z\d_]+\.px4board', 'default.px4board', px4board_file)
+        default_kconfig = re.sub(r'[a-zA-Z\d_-]+\.px4board', 'default.px4board', px4board_file)
        kconf.load_config(default_kconfig, replace=True)
        kconf.load_config(px4board_file, replace=False)

@@ -1,62 +1,91 @@
 #!/usr/bin/env python3

+import sys
+
+try:
+    from Crypto.Cipher import ChaCha20
+except ImportError as e:
+    print("Failed to import crypto: " + str(e))
+    print("")
+    print("You may need to install it using:")
+    print("    pip3 install --user pycryptodome")
+    print("")
+    sys.exit(1)
+
 from Crypto.PublicKey import RSA
 from Crypto.Cipher import PKCS1_OAEP
-from Crypto.Cipher import ChaCha20
 from Crypto.Hash import SHA256
-import binascii
+from pathlib import Path
 import argparse
-#from pathlib import Path
-import sys
+

 if __name__ == "__main__":

    parser = argparse.ArgumentParser(description="""CLI tool to decrypt an ulog file\n""")
-    parser.add_argument("ulog_file", help=".ulog file", nargs='?', default=None)
-    parser.add_argument("ulog_key", help=".ulogk, encrypted key", nargs='?', default=None)
+    parser.add_argument("ulog_file", help=".ulge/.ulgc, encrypted log file", nargs='?', default=None)
+    parser.add_argument("ulog_key", help=".ulgk, legacy encrypted key (give empty string '' to ignore for .ulge)", nargs='?', default=None)
    parser.add_argument("rsa_key", help=".pem format key for decrypting the ulog key", nargs='?', default=None)

    args = parser.parse_args()

-    # Only generate a key pair, don't sign
-    if not args.ulog_file or not args.ulog_key or not args.rsa_key:
-        print('Need all arguments, the encrypted ulog file, the key and the key decryption key')
-        sys.exit(1);
+    # Check all arguments are given
+    if not args.rsa_key:
+        print('Need all arguments, the encrypted ulog file, key file (or empty string if not needed) and the key decryption key (.pem)')
+        sys.exit(1)

    # Read the private RSA key to decrypt the cahcha key
    with open(args.rsa_key, 'rb') as f:
        r = RSA.importKey(f.read(), passphrase='')

-    # Read the encrypted xchacha key and the nonce
-    with open(args.ulog_key, 'rb') as f:
+    if args.ulog_key == "":
+        key_data_filename = args.ulog_file
+        magic = "ULogEnc"
+    else:
+        key_data_filename = args.ulog_key
+        magic = "ULogKey"
+
+    with open(key_data_filename, 'rb') as f:
+        # Read the encrypted xchacha key and the nonce
        ulog_key_header = f.read(22)

        # Parse the header
        try:
            # magic
-            if not ulog_key_header.startswith(bytearray("ULogKey".encode())):
+            if not ulog_key_header.startswith(bytearray(magic.encode())):
+                print("Incorrect header magic")
                raise Exception()
            # version
            if ulog_key_header[7] != 1:
+                print("Unsupported header version")
                raise Exception()
            # expected key exchange algorithm (RSA_OAEP)
            if ulog_key_header[16] != 4:
+                print("Unsupported key algorithm")
                raise Exception()
-            key_size = ulog_key_header[19] << 8 | ulog_key_header[18];
-            nonce_size = ulog_key_header[21] << 8 | ulog_key_header[20];
+            key_size = ulog_key_header[19] << 8 | ulog_key_header[18]
+            nonce_size = ulog_key_header[21] << 8 | ulog_key_header[20]
            ulog_key_cipher = f.read(key_size)
            nonce = f.read(nonce_size)
        except:
-            print("Keyfile format error")
-            sys.exit(1);
+            print("Keydata format error")
+            sys.exit(1)
+
+    if magic == "ULogEnc":
+        data_offset = 22 + key_size + nonce_size
+    else:
+        data_offset = 0

    # Decrypt the xchacha key
    cipher_rsa = PKCS1_OAEP.new(r,SHA256)
    ulog_key = cipher_rsa.decrypt(ulog_key_cipher)
    #print(binascii.hexlify(ulog_key))

-    # Read and decrypt the .ulgc
+    # Read and decrypt the ulog data
    cipher = ChaCha20.new(key=ulog_key, nonce=nonce)
+
+    outfilename = Path(args.ulog_file).stem + ".ulog"
    with open(args.ulog_file, 'rb') as f:
-        with open(args.ulog_file.rstrip(args.ulog_file[-1]), 'wb') as out:
+        if data_offset > 0:
+            f.seek(data_offset)
+        with open(outfilename, 'wb') as out:
            out.write(cipher.decrypt(f.read()))
@@ -40,6 +40,7 @@ exception_list = [
    'DRIVERS_DISTANCE_SENSOR_SRF05', # Requires hardcoded GPIO_ULTRASOUND
    'DRIVERS_PPS_CAPTURE', # Requires PPS GPIO config
    'DRIVERS_PWM_INPUT', # Requires PWM config
+    'DRIVERS_RPM_CAPTURE', # Requires PPS GPIO config
    'DRIVERS_TEST_PPM', # PIN config not portable
    'DRIVERS_TATTU_CAN', # Broken needs fixing
    'MODULES_REPLAY', # Fails on NuttX targets maybe force POSIX dependency?
@@ -11,9 +11,22 @@ import sys

 def get_msgs_list(msgdir):
    """
-    Makes list of msg files in the given directory
+    Makes a list of relative paths of .msg files in the given directory
+    and its subdirectories.
+
+    Parameters:
+    msgdir (str): The directory to search for .msg files.
+
+    Returns:
+    list: A list of relative paths to .msg files.
    """
-    return [fn for fn in os.listdir(msgdir) if fn.endswith(".msg")]
+    msgs = []
+    for root, _, files in os.walk(msgdir):
+        for fn in files:
+            if fn.endswith(".msg"):
+                relative_path = os.path.relpath(os.path.join(root, fn), msgdir)
+                msgs.append(relative_path)
+    return msgs


 if __name__ == "__main__":
@@ -29,10 +42,11 @@ if __name__ == "__main__":
    msg_files = get_msgs_list(msg_path)
    msg_files.sort()

-    filelist_in_markdown=''
+    versioned_msgs_list = ''
+    unversioned_msgs_list = ''

    for msg_file in msg_files:
-        msg_name = os.path.splitext(msg_file)[0]
+        msg_name = os.path.splitext(os.path.basename(msg_file))[0]
        output_file = os.path.join(output_dir, msg_name+'.md')
        msg_filename = os.path.join(msg_path, msg_file)
        print("{:} -> {:}".format(msg_filename, output_file))
@@ -81,10 +95,17 @@ if __name__ == "__main__":
        with open(output_file, 'w') as content_file:
            content_file.write(markdown_output)

-        index_markdown_file_link='- [%s](%s.md)' % (msg_name,msg_name)
-        if summary_description:
-            index_markdown_file_link+=" — %s" % summary_description
-        filelist_in_markdown+=index_markdown_file_link+"\n"
+        # Categorize as versioned or unversioned
+        if "versioned" in msg_file:
+            versioned_msgs_list += '- [%s](%s.md)' % (msg_name, msg_name)
+            if summary_description:
+                versioned_msgs_list += " — %s" % summary_description
+            versioned_msgs_list += "\n"
+        else:
+            unversioned_msgs_list += '- [%s](%s.md)' % (msg_name, msg_name)
+            if summary_description:
+                unversioned_msgs_list += " — %s" % summary_description
+            unversioned_msgs_list += "\n"

    # Write out the index.md file
    index_text="""# uORB Message Reference
@@ -94,10 +115,20 @@ This list is [auto-generated](https://github.com/PX4/PX4-Autopilot/blob/main/Too
 :::

 This topic lists the UORB messages available in PX4 (some of which may be may be shared by the [PX4-ROS 2 Bridge](../ros/ros2_comm.md)).
+
+[Versioned messages](../middleware/uorb.md#message-versioning) track changes to their definitions, with each modification resulting in a version increment.
+These messages are most likely shared through the PX4-ROS 2 Bridge.
+
 Graphs showing how these are used [can be found here](../middleware/uorb_graph.md).

+## Versioned Messages
+
 %s
-    """ % (filelist_in_markdown)
+
+## Unversioned Messages
+
+%s
+    """ % (versioned_msgs_list, unversioned_msgs_list)
    index_file = os.path.join(output_dir, 'index.md')
    with open(index_file, 'w') as content_file:
            content_file.write(index_text)
@@ -137,7 +137,7 @@ div.frame_variant td, div.frame_variant th {
                            #print(output_name,value, attribstrs[0].strip(),attribstrs[1].strip())
                    outputs += '</ul>'
                    if has_outputs:
-                        outputs_entry = '<p><b>Specific Outputs:</b>' + outputs + '</p>'
+                        outputs_entry = '<br><b>Specific Outputs:</b>' + outputs
                    else:
                        outputs_entry = ''

@@ -189,7 +189,7 @@ class uploader:
    GET_CHIP        = b'\x2c'     # rev5+  , get chip version
    SET_BOOT_DELAY  = b'\x2d'     # rev5+  , set boot delay
    GET_CHIP_DES    = b'\x2e'     # rev5+  , get chip description in ASCII
-    GET_VERSION     = b'\x2f'     # rev5+  , get chip description in ASCII
+    GET_VERSION     = b'\x2f'     # rev5+  , get bootloader version in ASCII
    CHIP_FULL_ERASE = b'\x40'     # full erase of flash, rev6+
    MAX_DES_LENGTH  = 20

@@ -201,7 +201,6 @@ class uploader:
    INFO_BOARD_ID   = b'\x02'        # board type
    INFO_BOARD_REV  = b'\x03'        # board revision
    INFO_FLASH_SIZE = b'\x04'        # max firmware size in bytes
-    BL_VERSION      = b'\x07'        # get bootloader version, e.g. major.minor.patch.githash (up to 20 chars)

    PROG_MULTI_MAX  = 252            # protocol max is 255, must be multiple of 4
    READ_MULTI_MAX  = 252            # protocol max is 255
@@ -179,17 +179,6 @@ if [[ $INSTALL_SIM == "true" ]]; then
 			gazebo_classic_version=11
 			gazebo_packages="gazebo$gazebo_classic_version libgazebo$gazebo_classic_version-dev"
 		fi
-	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
-		echo "Gazebo (Garden) will be installed"
-		echo "Earlier versions will be removed"
-		# Add Gazebo binary repository
-		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
-		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
-
-		sudo apt-get update -y --quiet
-
-		# Install Gazebo
-		gazebo_packages="gz-garden"
 	else
 		# Expects Ubuntu 22.04 > by default
 		echo "Gazebo (Harmonic) will be installed"
@@ -4,6 +4,7 @@
 #------------------------------------------------------------------------------

 param set-default IMU_GYRO_RATEMAX 1000
+param set-default SENS_FLOW_RATE 150
 param set-default SENS_IMU_CLPNOTI 0

 # Internal SPI
@@ -3,6 +3,8 @@
 # board specific defaults
 #------------------------------------------------------------------------------

+param set-default EKF2_MULTI_IMU 0
+
 # Mavlink ethernet (CFG 1000)
 param set-default MAV_2_CONFIG 1000
 param set-default MAV_2_BROADCAST 1
@@ -17,6 +19,7 @@ param set-default SENS_EN_INA228 0
 param set-default SENS_EN_INA226 1

 param set-default SENS_EN_THERMAL 1
+param set-default SENS_IMU_MODE 1
 param set-default SENS_IMU_TEMP 10.0
 #param set-default SENS_IMU_TEMP_FF 0.0
 #param set-default SENS_IMU_TEMP_I 0.025
@@ -18,6 +18,7 @@ CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
 CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_DRIVERS_OSD_MSP_OSD=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_COMMON_RC=y
 CONFIG_DRIVERS_UAVCAN=y
@@ -35,6 +36,7 @@ CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
@@ -176,6 +176,9 @@

 #define BOARD_BATTERY1_V_DIV	 (21.0f) // (20k + 1k) / 1k = 21

+#define BOARD_BATTERY_ADC_VOLTAGE_FILTER_S 0.075f
+#define BOARD_BATTERY_ADC_CURRENT_FILTER_S 0.125f
+
 #define ADC_SCALED_PAYLOAD_SENSE ADC_SCALED_12V_CHANNEL

 /* HW has to large of R termination on ADC todo:change when HW value is chosen */
@@ -32,10 +32,11 @@ then
 	param set-default SENS_TEMP_ID 2490378
 fi

-param set-default EKF2_MULTI_IMU 2
+param set-default EKF2_MULTI_IMU 0
 param set-default EKF2_OF_CTRL 1
 param set-default EKF2_OF_N_MIN 0.05
 param set-default EKF2_RNG_A_HMAX 25
 param set-default EKF2_RNG_QLTY_T 0.1

 param set-default SENS_FLOW_RATE 150
+param set-default SENS_IMU_MODE 1
@@ -0,0 +1,5 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y
@@ -0,0 +1,13 @@
+{
+    "board_id": 86,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the ARK Teseo GPS board",
+    "image": "",
+    "build_time": 0,
+    "summary": "ARKTESEOGPS",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 2080768,
+    "git_identity": "",
+    "board_revision": 0
+}
@@ -0,0 +1,14 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default CBRK_IO_SAFETY 0
+param set-default CANNODE_SUB_MBD 1
+param set-default CANNODE_SUB_RTCM 1
+param set-default MBE_ENABLE 1
+param set-default SENS_IMU_CLPNOTI 0
+
+tone_alarm start
+
+ekf2 start
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# board sensors init
+#------------------------------------------------------------------------------
+echo "Starting Teseo GPS"
+teseo_gps start -d /dev/ttyS0 -b 460800
+
+icm42688p -R 0 -s start
+
+bmp388 -I -b 1 start
+
+if ! iis2mdc -R 2 -I -b 1 start
+then
+	bmm150 -I -b 1 start
+fi
@@ -0,0 +1,57 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/teseo-gps/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_STM32_TIM8=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,152 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/* HSI - 8 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - 8  MHz Crystal
+ * LSE - not installed
+ */
+#define STM32_BOARD_USEHSE      1
+#define STM32_BOARD_XTAL        8000000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+
+/* Main PLL Configuration */
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
+#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
+
+#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
+
+#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
+#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
+#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
+
+#define STM32_SYSCLK_FREQUENCY  96000000ul
+
+/* AHB clock (HCLK) is SYSCLK (96MHz) */
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK (96MHz) */
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* Timers driven from APB2 will be PCLK2 since no prescale division */
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
+#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
+
+/* Alternate function pin selections ************************************************/
+
+/* UARTs */
+#define GPIO_USART1_RX	GPIO_USART1_RX_2
+#define GPIO_USART1_TX	GPIO_USART1_TX_3
+
+#define GPIO_USART2_RX	GPIO_USART2_RX_1
+#define GPIO_USART2_TX	GPIO_USART2_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
+
+/* I2C */
+
+#define GPIO_MCU_I2C1_SCL
+#define GPIO_MCU_I2C1_SDA
+
+#define GPIO_I2C1_SCL	GPIO_I2C1_SCL_1
+#define GPIO_I2C1_SDA	GPIO_I2C1_SDA_1
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+#define GPIO_I2C2_SCL	GPIO_I2C2_SCL_1
+#define GPIO_I2C2_SDA	GPIO_I2C2_SDA_4
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+
+/* SPI */
+#define GPIO_SPI1_MISO  GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI  GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK   GPIO_SPI1_SCK_1
+
+#endif /* __ARCH_BOARD_BOARD_H */
@@ -0,0 +1,46 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_1   // DMA2, Stream 0, Channel 3
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 3, Channel 3
+#define DMACHAN_USART1_RX  DMAMAP_USART1_RX_1 // DMA2, Stream 2, Channel 4
+#define DMAMAP_USART1_RX   DMAMAP_USART1_RX_1
+//#define DMACHAN_USART1_TX  DMAMAP_USART1_TX   // DMA2, Stream 7, Channel 4
@@ -0,0 +1,155 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/teseo-gps/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_VARS=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_FLASH_PREFETCH=y
+CONFIG_STM32_FLOWCONTROL_BROKEN=y
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2C2=y
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SPI1_DMA=y
+CONFIG_STM32_SPI1_DMA_BUFFER=1024
+CONFIG_STM32_TIM8=y
+CONFIG_STM32_USART1=y
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART_BREAKS=y
+CONFIG_STM32_WWDG=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=2000
+CONFIG_USART1_RXDMA=y
+CONFIG_USART1_TXBUFSIZE=2000
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_SERIAL_CONSOLE=y
+CONFIG_USART2_TXBUFSIZE=1100
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,134 @@
+/****************************************************************************
+ * nuttx-config/scripts/canbootloader_script.ld
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
@@ -0,0 +1,146 @@
+/****************************************************************************
+ * scripts/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 928K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(8);
+		/*
+		* This section positions the app_descriptor_t used
+		* by the make_can_boot_descriptor.py tool to set
+		* the application image's descriptor so that the
+		* uavcan bootloader has the ability to validate the
+		* image crc, size etc
+		*/
+		KEEP(*(.app_descriptor))
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
@@ -0,0 +1,67 @@
+############################################################################
+#
+#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
+
+	add_library(drivers_board
+		boot_config.h
+		boot.c
+		led.c
+		led.h
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch
+			nuttx_drivers
+			canbootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
+
+else()
+	add_library(drivers_board
+		can.c
+		i2c.cpp
+		init.c
+		led.c
+		spi.cpp
+	)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_spi
+			drivers__led # drv_led_start
+			nuttx_arch
+			nuttx_drivers
+			px4_layer
+	)
+endif()
@@ -0,0 +1,134 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * board internal definitions
+ */
+
+#pragma once
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+/* GPS nRESET */
+#define GPIO_GPS_nRESET       /* PB5 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN5)
+
+/* GPS TIMEPULSE */
+#define GPIO_GPS_TIMEPULSE    /* PB2 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN2|GPIO_EXTI)
+
+/* GPS EXTINT */
+#define GPIO_GPS_EXTINT       /* PB4 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN4)
+
+/* Tone alarm output. */
+#define TONE_ALARM_TIMER             2    /* timer 2 */
+#define TONE_ALARM_CHANNEL           1    /* channel 1 */
+#define GPIO_TONE_ALARM_IDLE  /* PA0  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN0)
+#define GPIO_TONE_ALARM       /* PA0  */ (GPIO_ALT|GPIO_AF1|GPIO_SPEED_2MHz|GPIO_PUSHPULL|GPIO_PORTA|GPIO_PIN0)
+
+/* CAN  Silent mode control */
+#define GPIO_CAN1_SILENT_S0   /* PB12 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN12)
+
+/* CAN termination software control */
+#define GPIO_CAN1_TERMINATION /* PB13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
+#define GPIO_CAN_TERM                    GPIO_CAN1_TERMINATION
+
+/* ICM42688p FSYNC */
+#define GPIO_42688P_FSYNC     /* PB8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
+
+/* Boot config */
+#define GPIO_BOOT_CONFIG      /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
+
+/* LEDs are driven with open drain to support Anode to 5V or 3.3V */
+#define GPIO_TIM1_CH1         /* PA8  */ (GPIO_TIM1_CH1_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH2         /* PA9  */ (GPIO_TIM1_CH2_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH3         /* PA10 */ (GPIO_TIM1_CH3_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+
+#define GPIO_I2C1_SCL_RESET   /* PB6  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
+#define GPIO_I2C1_SDA_RESET   /* PB7  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN7)
+
+#define GPIO_I2C2_SCL_RESET   /* PB10 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_I2C2_SDA_RESET   /* PB9  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN9)
+
+#define GPIO_I2C2_SCL_INPUT   /* PB10 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_I2C2_SDA_INPUT   /* PB9  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_2MHz|GPIO_PORTB|GPIO_PIN9)
+
+#define PX4_GPIO_I2C2_INIT_LIST { \
+		GPIO_I2C2_SCL_RESET,              \
+		GPIO_I2C2_SDA_RESET,              \
+	}
+
+#define GPIO_USART1_RX_GPIO	(GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTB|GPIO_PIN3)
+#define GPIO_USART1_TX_GPIO	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN15)
+
+#define GPIO_USART2_RX_GPIO	(GPIO_INPUT|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN3)
+#define GPIO_USART2_TX_GPIO	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_PULLUP|GPIO_SPEED_50MHz|GPIO_PORTA|GPIO_PIN2)
+
+#define FLASH_BASED_PARAMS
+
+/* High-resolution timer */
+#define HRT_TIMER                    3  /* use timer 3 for the HRT */
+#define HRT_TIMER_CHANNEL            4  /* use capture/compare channel 4 */
+
+#define PX4_GPIO_INIT_LIST { \
+		GPIO_GPS_nRESET,                  \
+		GPIO_GPS_TIMEPULSE,               \
+		GPIO_GPS_EXTINT,                  \
+		GPIO_I2C1_SCL_RESET,              \
+		GPIO_I2C1_SDA_RESET,              \
+		GPIO_I2C2_SCL_INPUT,              \
+		GPIO_I2C2_SDA_INPUT,              \
+		GPIO_42688P_FSYNC,                \
+		GPIO_BOOT_CONFIG,                 \
+		GPIO_CAN1_TX,                     \
+		GPIO_CAN1_RX,                     \
+		GPIO_CAN1_SILENT_S0,              \
+		GPIO_CAN1_TERMINATION,            \
+	}
+
+__BEGIN_DECLS
+
+#define BOARD_HAS_N_S_RGB_LED       1
+#define BOARD_MAX_LEDS              BOARD_HAS_N_S_RGB_LED
+
+#ifndef __ASSEMBLY__
+
+extern void stm32_spiinitialize(void);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS
@@ -0,0 +1,188 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *       Author: Ben Dyer <ben_dyer@mac.com>
+ *               Pavel Kirienko <pavel.kirienko@zubax.com>
+ *               David Sidrane <david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <px4_config.h>
+#include <stdint.h>
+#include "boot_config.h"
+#include "board.h"
+
+#include <debug.h>
+#include <string.h>
+#include <arch/board/board.h>
+
+#include <nuttx/board.h>
+#include "led.h"
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
+	stm32_configgpio(GPIO_CAN1_RX);
+	stm32_configgpio(GPIO_CAN1_TX);
+	stm32_configgpio(GPIO_CAN1_SILENT_S0);
+	stm32_configgpio(GPIO_CAN1_TERMINATION);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+
+#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
+	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
+#endif
+
+}
+
+/************************************************************************************
+ * Name: board_deinitialize
+ *
+ * Description:
+ *   This function is called by the bootloader code prior to booting
+ *   the application. Is should place the HW into an benign initialized state.
+ *
+ ************************************************************************************/
+
+void board_deinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+}
+
+/****************************************************************************
+ * Name: board_get_product_name
+ *
+ * Description:
+ *   Called to retrieve the product name. The returned value is a assumed
+ *   to be written to a pascal style string that will be length prefixed
+ *   and not null terminated
+ *
+ * Input Parameters:
+ *    product_name - A pointer to a buffer to write the name.
+ *    maxlen       - The maximum number of charter that can be written
+ *
+ * Returned Value:
+ *   The length of characters written to the buffer.
+ *
+ ****************************************************************************/
+
+uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
+{
+	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
+}
+
+/****************************************************************************
+ * Name: board_get_hardware_version
+ *
+ * Description:
+ *   Called to retrieve the hardware version information. The function
+ *   will first initialize the the callers struct to all zeros.
+ *
+ * Input Parameters:
+ *    hw_version - A pointer to a uavcan_hardwareversion_t.
+ *
+ * Returned Value:
+ *   Length of the unique_id
+ *
+ ****************************************************************************/
+
+size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
+{
+	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
+
+	hw_version->major = HW_VERSION_MAJOR;
+	hw_version->minor = HW_VERSION_MINOR;
+
+	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
+}
+
+/****************************************************************************
+ * Name: board_indicate
+ *
+ * Description:
+ *   Provides User feedback to indicate the state of the bootloader
+ *   on board specific  hardware.
+ *
+ * Input Parameters:
+ *    indication - A member of the uiindication_t
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
+
+typedef begin_packed_struct struct led_t {
+	uint8_t red;
+	uint8_t green;
+	uint8_t blue;
+	uint8_t hz;
+} end_packed_struct led_t;
+
+static const  led_t i2l[] = {
+
+	led(0, off,                             0,     0,     0,     0),
+	led(1, reset,                          128,   128,   128,   30),
+	led(2, autobaud_start,                  0,   128,     0,     1),
+	led(3, autobaud_end,                    0,   128,     0,     2),
+	led(4, allocation_start,                0,     0,    64,     2),
+	led(5, allocation_end,                  0,   128,    64,     3),
+	led(6, fw_update_start,                32,   128,    64,     3),
+	led(7, fw_update_erase_fail,           32,   128,    32,     3),
+	led(8, fw_update_invalid_response,     64,     0,     0,     1),
+	led(9, fw_update_timeout,              64,     0,     0,     2),
+	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
+	led(b, jump_to_app,                     0,   128,     0,    10),
+
+};
+
+void board_indicate(uiindication_t indication)
+{
+	rgb_led(i2l[indication].red,
+		i2l[indication].green,
+		i2l[indication].blue,
+		i2l[indication].hz);
+}
@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/*
+ * @file boot_config.h
+ *
+ * bootloader definitions that configures the behavior and options
+ * of the Boot loader
+ * This file is relies on the parent folder's boot_config.h file and defines
+ * different usages of the hardware for bootloading
+ */
+
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+/* Bring in the board_config.h definitions
+ * todo:make this be pulled in from a targed's build
+ * files in nuttx*/
+
+#include "board_config.h"
+#include "uavcan.h"
+#include <nuttx/compiler.h>
+
+#include <stdint.h>
+
+#include <stm32_flash.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
+
+//todo:wrap OPT_x in in ifdefs for command line definitions
+#define OPT_TBOOT_MS                    3000
+#define OPT_NODE_STATUS_RATE_MS         800
+#define OPT_NODE_INFO_RATE_MS           50
+#define OPT_BL_NUMBER_TIMERS            7
+
+/*
+ *  This Option set is set to 1 ensure a provider of firmware has an
+ *  opportunity update the node's firmware.
+ *  This Option is the default policy and can be overridden by
+ *  a jumper
+ *  When this Policy is set, the node will ignore tboot and
+ *  wait indefinitely for a GetNodeInfo request before booting.
+ *
+ *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
+ *  the polarity of the jumper to be True Active
+ *
+ *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
+ *                                                 Jumper
+ *   yes           1                       0         x
+ *   yes           1                       1       Active
+ *   no            1                       1       Not Active
+ *   no            0                       0         X
+ *   yes           0                       1       Active
+ *   no            0                       1       Not Active
+ *
+ */
+#define OPT_WAIT_FOR_GETNODEINFO                    0
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 1
+
+#define OPT_ENABLE_WD           1
+
+#define OPT_RESTART_TIMEOUT_MS          20000
+
+/* Reserved for the Booloader */
+#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
+
+/* Reserved for the application out of the total
+ * system flash minus the BOOTLOADER_SIZE_IN_K
+ */
+#define OPT_APPLICATION_RESERVER_IN_K    0
+
+#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
+#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
+
+
+#define FLASH_BASE              STM32_FLASH_BASE
+#define FLASH_SIZE              STM32_FLASH_SIZE
+
+#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
+#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
+#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
+
+/* If this board uses big flash that have large sectors */
+
+#define OPT_USE_YIELD
+
+/* Bootloader Option*****************************************************************
+ *
+ */
+#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)
@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_internal.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+#ifdef CONFIG_CAN
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+
+#endif
@@ -0,0 +1,39 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusInternal(1),
+	initI2CBusExternal(2),
+};
@@ -0,0 +1,172 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * board specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialization.
+ */
+
+#include <px4_platform_common/px4_config.h>
+#include <px4_platform_common/tasks.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+#include <syslog.h>
+
+#include <nuttx/board.h>
+
+#include <stm32.h>
+#include "board_config.h"
+#include "led.h"
+#include <stm32_uart.h>
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <drivers/drv_watchdog.h>
+
+#include <systemlib/px4_macros.h>
+
+#include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	watchdog_init();
+
+	/* configure pins */
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	// Configure SPI all interfaces GPIO & enable power.
+	stm32_spiinitialize();
+
+	// Check if both I2C2 signals are grounded. If so go into gps passthrough mode
+	if (!stm32_gpioread(GPIO_I2C2_SCL_INPUT) && !stm32_gpioread(GPIO_I2C2_SDA_INPUT)) {
+		rgb_led(128, 128, 128, 10);
+		stm32_configgpio(GPIO_USART1_TX_GPIO);
+		stm32_configgpio(GPIO_USART1_RX_GPIO);
+		stm32_configgpio(GPIO_USART2_TX_GPIO);
+		stm32_configgpio(GPIO_USART2_RX_GPIO);
+
+		while (1) {
+			watchdog_pet();
+			stm32_gpiowrite(GPIO_USART2_TX_GPIO, stm32_gpioread(GPIO_USART1_RX_GPIO));
+			stm32_gpiowrite(GPIO_USART1_TX_GPIO, stm32_gpioread(GPIO_USART2_RX_GPIO));
+		}
+
+	} else {
+		const uint32_t i2c2_gpio[] = PX4_GPIO_I2C2_INIT_LIST;
+		px4_gpio_init(i2c2_gpio, arraySize(i2c2_gpio));
+	}
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	px4_platform_init();
+
+#if defined(SERIAL_HAVE_RXDMA)
+	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
+	static struct hrt_call serial_dma_call;
+	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
+#endif
+
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{2, 16 * 1024, 0x08008000},
+		{3, 16 * 1024, 0x0800C000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+	}
+
+#endif // FLASH_BASED_PARAMS
+
+	/* Configure the HW based on the manifest */
+	//px4_platform_configure();
+
+	return OK;
+}
@@ -0,0 +1,124 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "led.h"
+
+#define TMR_BASE        STM32_TIM1_BASE
+#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
+#define TMR_REG(o)      (TMR_BASE+(o))
+
+void rgb_led(int r, int g, int b, int freqs)
+{
+
+	long fosc = TMR_FREQUENCY;
+	long prescale = 2048;
+	long p1s = fosc / prescale;
+	long p0p5s  = p1s / 2;
+	uint16_t val;
+	static bool once = 0;
+
+	if (!once) {
+		once = 1;
+
+		/* Enabel Clock to Block */
+		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
+
+		/* Reload */
+
+		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
+		val |= ATIM_EGR_UG;
+		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
+
+		/* Set Prescaler STM32_TIM_SETCLOCK */
+
+		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
+
+		/* Enable STM32_TIM_SETMODE*/
+
+		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
+			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
+		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
+			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
+			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
+
+
+		stm32_configgpio(GPIO_TIM1_CH1);
+		stm32_configgpio(GPIO_TIM1_CH2);
+		stm32_configgpio(GPIO_TIM1_CH3);
+
+		/* master output enable = on */
+		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
+	}
+
+	long p  = freqs == 0 ? p1s : p1s / freqs;
+	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
+
+	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
+
+	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
+	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
+	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
+
+	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+	if (freqs == 0) {
+		val &= ~ATIM_CR1_CEN;
+
+	} else {
+		val |= ATIM_CR1_CEN;
+	}
+
+	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+}
@@ -0,0 +1,37 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
+ *   Author: David Sidrane<david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+__BEGIN_DECLS
+void rgb_led(int r, int g, int b, int freqs);
+__END_DECLS
@@ -0,0 +1,44 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI1, {
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortB, GPIO::Pin0}, SPI::DRDY{GPIO::PortB, GPIO::Pin1}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);
@@ -0,0 +1,17 @@
+# UAVCAN boot loadable Module ID
+set(uavcanblid_sw_version_major ${PX4_VERSION_MAJOR})
+set(uavcanblid_sw_version_minor ${PX4_VERSION_MINOR})
+add_definitions(
+	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
+	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
+)
+
+set(uavcanblid_hw_version_major 0)
+set(uavcanblid_hw_version_minor 86)
+set(uavcanblid_name "\"org.ark.teseo-gps\"")
+
+add_definitions(
+	-DHW_UAVCAN_NAME=${uavcanblid_name}
+	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
+	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
+)
@@ -31,6 +31,7 @@ CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
+# CONFIG_NAVIGATOR_ADSB is not set
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 # CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
@@ -32,6 +32,7 @@ CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
+# CONFIG_NAVIGATOR_ADSB is not set
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 # CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
@@ -352,6 +352,7 @@
 		GPIO_nSAFETY_SWITCH_LED_OUT,	        \
 		GPIO_SAFETY_SWITCH_IN,			\
 		GPIO_nARMED,				\
+		GPIO_PWM_LEVEL_CONTROL,			\
 	}

 #define BOARD_ENABLE_CONSOLE_BUFFER
@@ -36,6 +36,7 @@ CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
+# CONFIG_NAVIGATOR_ADSB is not set
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_SYSTEMCMDS_DMESG=y
@@ -0,0 +1 @@
+CONFIG_BOARD_TOOLCHAIN="aarch64-linux-gnu"
@@ -27,6 +27,7 @@ CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
+# CONFIG_NAVIGATOR_ADSB is not set
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_SYSTEMCMDS_DMESG=y
@@ -46,9 +46,8 @@
 /* CAN  Silent mode control */
 #define GPIO_CAN1_SILENT_S0   /* PB7  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN7)

-// TODO: figure out
 /* Boot config */
-//#define GPIO_BOOT_CONFIG      /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
+#define GPIO_BOOT_CONFIG      /* PC14 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN14|GPIO_EXTI)

 /* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
 #define GPIO_nLED_RED          /* PB0  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN0)
@@ -68,6 +67,10 @@
 // TODO figure out
 #define GPIO_GETNODEINFO_JUMPER 0 //(GPIO_BOOT_CONFIG & ~GPIO_EXTI)

+// CAN termination set by param, available from RC02
+#define GPIO_CAN1_TERMINATION /* PA12 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN12)
+#define GPIO_CAN_TERM                    GPIO_CAN1_TERMINATION
+
 #define FLASH_BASED_PARAMS

 /* High-resolution timer */
@@ -96,6 +96,7 @@ __EXPORT void stm32_boardinitialize(void)
 	stm32_configgpio(GPIO_CAN1_TX);

 	stm32_configgpio(GPIO_CAN1_SILENT_S0);
+	stm32_configgpio(GPIO_CAN1_TERMINATION);

 	// Configure SPI all interfaces GPIO & enable power.
 	stm32_spiinitialize();
@@ -23,6 +23,7 @@ CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
+# CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
 # CONFIG_EKF2_AUXVEL is not set
 # CONFIG_EKF2_BARO_COMPENSATION is not set
 # CONFIG_EKF2_DRAG_FUSION is not set
@@ -40,6 +41,7 @@ CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
+# CONFIG_NAVIGATOR_ADSB is not set
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 # CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
@@ -34,6 +34,7 @@ CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
+# CONFIG_EKF2_AUX_GLOBAL_POSITION is not set
 # CONFIG_EKF2_AUXVEL is not set
 # CONFIG_EKF2_BARO_COMPENSATION is not set
 # CONFIG_EKF2_DRAG_FUSION is not set
@@ -11,4 +11,7 @@ then
 	icm42688p -R 6 -s start
 fi

-bmp280 -X start
+if ! bmp280 -X start
+then
+	spa06 -X start
+fi
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				`mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p`