remove unused debug.h

BMI0xx: remove unused board_dma_alloc.h
ADIS16497: replace NuttX specific up_udelay with HAL version px4_udelay
2026-06-03 05:10:05 +08:00 · 2023-08-14 11:03:24 -04:00 · 2023-08-14 11:03:24 -04:00 · 2023-08-14 11:03:24 -04:00 · 2023-08-14 11:03:24 -04:00 · 2023-08-14 10:52:37 -04:00
763 changed files with 20017 additions and 30915 deletions
@@ -61,20 +61,18 @@ pipeline {
                     "holybro_kakutef7_default",
                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
+                     "matek_h743-slim",
                     "matek_gnss-m9n-f4_canbootloader",
                     "matek_gnss-m9n-f4_default",
-                     "matek_h743-mini_default",
-                     "matek_h743-slim_default",
-                     "matek_h743_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7-oem_default",
-                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_ctrl-zero-h7_default",
                     "mro_ctrl-zero-h7_rtps",
+                     "mro_ctrl-zero-h7-oem_default",
+                     "mro_ctrl-zero-h7-oem_rtps",
                     "mro_pixracerpro_default",
                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
@@ -89,27 +87,25 @@ pipeline {
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
+                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
-                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_lto",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
+                     "px4_fmu-v5_uavcanv1",
                     "px4_fmu-v5x_default",
                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
-                     "raspberrypi_pico_default",
                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'

  resetParameters()

@@ -809,9 +809,6 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
-
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
@@ -867,15 +864,12 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -1,13 +0,0 @@
-# Google C++ style as base
-Language: Cpp
-BasedOnStyle: Google
-
-# Indentation using tabs
-UseTab: ForContinuationAndIndentation
-TabWidth: 8
-IndentWidth: 8
-ContinuationIndentWidth: 8
-ConstructorInitializerIndentWidth: 8
-AccessModifierOffset: -8
-
-ColumnLimit: 120 # Allow more collumns
@@ -1,34 +1,32 @@
 ---
-name: 🐛 Bug report
+name: Bug report
 about: Create a report to help us improve
-labels: bug-report

 ---

-## Describe the bug
+**Describe the bug**
 A clear and concise description of the bug.

-## To Reproduce
+**To Reproduce**
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-## Expected behavior
+**Expected behavior**
 A clear and concise description of what you expected to happen.

-## Log Files and Screenshots
+**Log Files and Screenshots**
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
- Share the link to the log (Copy and paste the URL of the log)
+- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).

 Add screenshots to help explain your problem.

-## Drone (please complete the following information):
+**Drone (please complete the following information):**
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-## Additional context
+**Additional context**
 Add any other context about the problem here.
@@ -1,20 +1,19 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
-labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-## Describe problem solved by the proposed feature
+**Describe problem solved by the proposed feature**
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-## Describe your preferred solution
+**Describe your preferred solution**
 A clear and concise description of what you want to happen.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Additional context
+**Additional context**
 Add any other context or screenshots for the feature request here.
@@ -1,13 +1,10 @@
 ---
 name: ⛔ Support Question
-about: See http://discuss.px4.io/ for questions about using PX4.
+about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.

 ---

-## Attention! Please read the note below
-
-We use GitHub issues only to discuss PX4 bugs and new features.
-
-**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
+We use GitHub issues only to discuss PX4 bugs and new features. For
+questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).

 Thanks!
@@ -1,11 +1,9 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/px4_user_guide for documentation issues
+about: See https://github.com/PX4/Devguide for documentation issues

 ---

-## Attention! Please read the note below
-
-**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
+PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).

 Thanks!
@@ -21,6 +21,7 @@ jobs:
          ark_can-gps,
          ark_can-rtk-gps,
          ark_cannode,
+          ark_fmu-v6x,
          atl_mantis-edu,
          av_x-v1,
          bitcraze_crazyflie,
@@ -37,10 +38,8 @@ jobs:
          holybro_kakutef7,
          holybro_kakuteh7,
          holybro_pix32v5,
-          matek_gnss-m9n-f4,
-          matek_h743,
-          matek_h743-mini,
          matek_h743-slim,
+          matek_gnss-m9n-f4,
          modalai_fc-v1,
          modalai_fc-v2,
          mro_ctrl-zero-f7,
@@ -55,6 +54,7 @@ jobs:
          nxp_fmurt1062-v1,
          nxp_ucans32k146,
          omnibus_f4sd,
+          raspberrypi_pico,
          px4_fmu-v2,
          px4_fmu-v3,
          px4_fmu-v4,
@@ -64,7 +64,6 @@ jobs:
          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
-          raspberrypi_pico,
          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
@@ -36,14 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/cyphal/libcanard"]
-	path = src/drivers/cyphal/libcanard
-	url = https://github.com/opencyphal/libcanard.git
-[submodule "src/drivers/cyphal/public_regulated_data_types"]
-	path = src/drivers/cyphal/public_regulated_data_types
-	url = https://github.com/opencyphal/public_regulated_data_types.git
-[submodule "src/drivers/cyphal/legacy_data_types"]
-	path = src/drivers/cyphal/legacy_data_types
+[submodule "src/drivers/uavcan_v1/libcanard"]
+	path = src/drivers/uavcan_v1/libcanard
+	url = https://github.com/UAVCAN/libcanard.git
+[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
+	path = src/drivers/uavcan_v1/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
+[submodule "src/drivers/uavcan_v1/legacy_data_types"]
+	path = src/drivers/uavcan_v1/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -131,6 +131,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_cannode_canbootloader
+    ark_fmu-v6x_bootloader:
+      short: ark_fmu-v6x_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_fmu-v6x_bootloader
+    ark_fmu-v6x_default:
+      short: ark_fmu-v6x_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_fmu-v6x_default
    atl_mantis-edu_default:
      short: atl_mantis-edu
      buildType: MinSizeRel
@@ -126,6 +126,8 @@
        },
        "search.showLineNumbers": true,
        "telemetry.enableTelemetry": false,
+        "terminal.integrated.copyOnSelection": true,
+        "terminal.integrated.rightClickBehavior": "paste",
        "terminal.integrated.scrollback": 5000,
        "window.title": "${dirty} ${activeEditorMedium}${separator}${rootName}",
        "workbench.editor.highlightModifiedTabs": true,
@@ -99,7 +99,7 @@
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.2 FATAL_ERROR)

 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -234,14 +234,6 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)

-# Check if LTO option and check if toolchain supports it
-if(LTO)
-    include(CheckIPOSupported)
-    check_ipo_supported()
-    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
-    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
-endif()
-
 set(package-contact "px4users@googlegroups.com")

 set(CMAKE_CXX_STANDARD 14)
@@ -37,8 +37,8 @@ menu "Toolchain"
        help
            forces nolockstep behaviour, despite REPLAY env variable

-    config BOARD_LINUX
-        bool "Linux OS"
+    config BOARD_LINUX_TARGET
+        bool "Linux OS Target"
        depends on PLATFORM_POSIX
        help
            Board Platform is running the Linux operating system
@@ -51,13 +51,6 @@ menu "Toolchain"
        string "Architecture"
        default ""

-    config BOARD_LTO
-        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
-        default n
-        help
-            Enables LTO flag in linker
-            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
-
    config BOARD_FULL_OPTIMIZATION
        bool "Full optmization (O3)"
        default n
@@ -331,7 +331,7 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -375,10 +375,6 @@ format:
 	$(call colorecho,'Formatting with astyle')
 	@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh --fix

-format_clang:
-	$(call colorecho,'Formatting with clang-format')
-	@"$(SRC_DIR)"/Tools/astyle/files_to_check_code_style.sh | xargs clang-format -i -style=file
-
 # Testing
 # --------------------------------------------------------------------
 .PHONY: tests tests_coverage tests_mission tests_mission_coverage tests_offboard tests_avoidance
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-## Describe problem solved by this pull request
-A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
+**Describe problem solved by this pull request**
+A clear and concise description of the problem this proposed change will solve.
 E.g. For this use case I ran into...

-## Describe your solution
+**Describe your solution**
 A clear and concise description of what you have implemented.

-## Describe possible alternatives
+**Describe possible alternatives**
 A clear and concise description of alternative solutions or features you've considered.

-## Test data / coverage
+**Test data / coverage**
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-## Additional context
+**Additional context**
 Add any other related context or media.
@@ -86,28 +86,10 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial

 # Check for flow sensor
-if param compare -s SENS_EN_PX4FLOW 1
+if param compare SENS_EN_PX4FLOW 1
 then
 	px4flow start -X &
 fi

-if param compare -s IMU_GYRO_CAL_EN 1
-then
-	gyro_calibration start
-fi
-
-
-if param compare -s MBE_ENABLE 1
-then
-	# conservative mag bias estimation
-	param set-default MBE_LEARN_GAIN 5
-	param set-default IMU_GYRO_CUTOFF 20
-	mag_bias_estimator start
-fi
-
-param set-default SENS_MAG_RATE 100
-
-sensors start
-
 uavcannode start
 unset R
@@ -1,101 +0,0 @@
-#!/bin/sh
-#
-# @name 6DoF Omnicopter SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jalim@ethz.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default SYS_CTRL_ALLOC 1
-
-
-param set-default CA_AIRFRAME 0
-
-param set-default CA_ROTOR_COUNT 8
-param set-default CA_R_REV 255
-
-param set-default CA_ROTOR0_PX 0.14435
-param set-default CA_ROTOR0_PY -0.14435
-param set-default CA_ROTOR0_PZ -0.14435
-param set-default CA_ROTOR0_KM 0.05 # CCW
-param set-default CA_ROTOR0_AX -0.788675
-param set-default CA_ROTOR0_AY -0.211325
-param set-default CA_ROTOR0_AZ -0.57735
-
-param set-default CA_ROTOR1_PX -0.14435
-param set-default CA_ROTOR1_PY -0.14435
-param set-default CA_ROTOR1_PZ -0.14435
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_AX 0.211325
-param set-default CA_ROTOR1_AY -0.788675
-param set-default CA_ROTOR1_AZ 0.57735
-
-param set-default CA_ROTOR2_PX 0.14435
-param set-default CA_ROTOR2_PY 0.14435
-param set-default CA_ROTOR2_PZ -0.14435
-param set-default CA_ROTOR2_KM 0.05
-param set-default CA_ROTOR2_AX -0.211325
-param set-default CA_ROTOR2_AY 0.788675
-param set-default CA_ROTOR2_AZ 0.57735
-
-param set-default CA_ROTOR3_PX -0.14435
-param set-default CA_ROTOR3_PY 0.14435
-param set-default CA_ROTOR3_PZ -0.14435
-param set-default CA_ROTOR3_KM 0.05
-param set-default CA_ROTOR3_AX 0.788675
-param set-default CA_ROTOR3_AY 0.211325
-param set-default CA_ROTOR3_AZ -0.57735
-
-param set-default CA_ROTOR4_PX 0.14435
-param set-default CA_ROTOR4_PY -0.14435
-param set-default CA_ROTOR4_PZ 0.14435
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR4_AX 0.788675
-param set-default CA_ROTOR4_AY 0.211325
-param set-default CA_ROTOR4_AZ -0.57735
-
-param set-default CA_ROTOR5_PX -0.14435
-param set-default CA_ROTOR5_PY -0.14435
-param set-default CA_ROTOR5_PZ 0.14435
-param set-default CA_ROTOR5_KM 0.05
-param set-default CA_ROTOR5_AX -0.211325
-param set-default CA_ROTOR5_AY 0.788675
-param set-default CA_ROTOR5_AZ 0.57735
-
-param set-default CA_ROTOR6_PX 0.14435
-param set-default CA_ROTOR6_PY 0.14435
-param set-default CA_ROTOR6_PZ 0.14435
-param set-default CA_ROTOR6_KM 0.05
-param set-default CA_ROTOR6_AX 0.211325
-param set-default CA_ROTOR6_AY -0.788675
-param set-default CA_ROTOR6_AZ 0.57735
-
-param set-default CA_ROTOR7_PX -0.14435
-param set-default CA_ROTOR7_PY 0.14435
-param set-default CA_ROTOR7_PZ 0.14435
-param set-default CA_ROTOR7_KM 0.05
-param set-default CA_ROTOR7_AX -0.788675
-param set-default CA_ROTOR7_AY -0.211325
-param set-default CA_ROTOR7_AZ -0.57735
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-
-# disable MC desaturation which improves attitude tracking
-param set-default CA_METHOD 0
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
-
-set MIXER skip
-set MIXER_AUX none
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name QuadrotorX SITL for SIH
-#
-# @type Quadrotor
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_x
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set SIH_VEHICLE_TYPE 0
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL for SIH
-#
-# @type Plane
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER AERT
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 6.0
-param set SIH_MASS 0.3
-param set SIH_IXX 0.00402
-param set SIH_IYY 0.0144
-param set SIH_IZZ 0.0177
-param set SIH_IXZ 0.00046
-param set SIH_KDV 0.2
-
-param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
-param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Tailsitter Duo
-#
-# @type VTOL
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 0
-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_SC 0.3
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default MAV_TYPE 19
-set MAV_TYPE 19
-set MIXER vtol_tailsitter_duo_sat
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 2.0
-param set SIH_Q_MAX 0.0165
-param set SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set SIH_IXX 0.00354
-param set SIH_IYY 0.000625
-param set SIH_IZZ 0.00300
-param set SIH_IXZ 0.0
-param set SIH_KDV 0.2
-param set SIH_L_ROLL 0.145
-
-# sih as tailsitter
-param set SIH_VEHICLE_TYPE 2
@@ -18,7 +18,3 @@ param set-default LPE_FAKE_ORIGIN 1

 param set-default MPC_ALT_MODE 2

-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5
@@ -9,6 +9,7 @@

 # EKF2
 param set-default EKF2_AID_MASK 2
+param set-default SENS_FLOW_ROT 0

 # LPE: Flow-only mode
 param set-default LPE_FUSION 242
@@ -25,8 +25,6 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3

-param set-default FW_SPOILERS_LND 0.4
-
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25
@@ -7,11 +7,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-# TODO: Enable motor failure detection when the
-# VTOL no longer reports 0A for all ESCs in SITL
-param set-default FD_ACT_EN 0
-param set-default FD_ACT_MOT_TOUT 500
-
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

@@ -9,7 +9,7 @@

 param set-default MAV_TYPE 21

-param set-default SYS_CTRL_ALLOC 1
+# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

 param set-default CA_ROTOR_COUNT 4
@@ -27,7 +27,9 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05

 param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -1,4 +1,6 @@

+mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
+
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -35,12 +35,8 @@ px4_add_romfs_files(
 	10016_iris
 	10017_iris_ctrlalloc
 	10018_iris_foggy_lidar
-	10019_omnicopter
 	10020_if750a
 	10030_px4vision
-	10040_quadx
-	10041_airplane
-	10042_xvert
 	1010_iris_opt_flow
 	1010_iris_opt_flow.post
 	1011_iris_irlock
@@ -30,12 +30,3 @@ mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $ud

 # Onboard link to gimbal
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
-
-# To display for SIH sitl
-if [ "$SIM_MODE" = "sihsim" ]; then
-	udp_sihsim_port_local=$((19450+px4_instance))
-	udp_sihsim_port_remote=$((19410+px4_instance))
-	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote
-	mavlink stream -r 200 -s HIL_ACTUATOR_CONTROLS -u  $udp_sihsim_port_local
-	mavlink stream -r 25 -s HIL_STATE_QUATERNION -u  $udp_sihsim_port_local
-fi
@@ -95,9 +95,10 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
-	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
+
+	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
@@ -154,8 +155,6 @@ param set-default SDLOG_DIRS_MAX 7

 param set-default TRIG_INTERFACE 3

-param set-default SYS_FAILURE_EN 1
-
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_DL_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 10" | bc)
@@ -197,6 +196,14 @@ fi

 . "$autostart_file"

+#
+# If autoconfig parameter was set, reset it and save parameters.
+#
+if [ $AUTOCNF = yes ]
+then
+	param set SYS_AUTOCONFIG 0
+fi
+
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250

@@ -204,11 +211,8 @@ param set IMU_INTEG_RATE 250
 . px4-rc.params

 dataman start
-# start sih in sih_sim mode, otherwise simulator module
-if [ "$SIM_MODE" = "sihsim" ]; then
-	sih start
 # only start the simulator if not in replay mode, as both control the lockstep time
-elif ! replay tryapplyparams
+if ! replay tryapplyparams
 then
  . px4-rc.simulator
 fi
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name Steadidrone QU4D
+#
+# @type Quadrotor Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 feed-through of RC AUX1 channel
+# @output MAIN6 feed-through of RC AUX2 channel
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+# @output AUX4 feed-through of RC FLAPS channel
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 4
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_P 0.13
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_P 0.19
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.004
+param set-default MC_YAW_P 4
+
+set MIXER quad_w
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# @name Steadidrone MAVRIK
+#
+# @type Octo Coax Wide
+# @class Copter
+#
+# @output MAIN1 motor 1
+# @output MAIN2 motor 2
+# @output MAIN3 motor 3
+# @output MAIN4 motor 4
+# @output MAIN5 motor 5
+# @output MAIN6 motor 6
+# @output MAIN7 motor 7
+# @output MAIN8 motor 8
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default MC_PITCH_P 4
+param set-default MC_PITCHRATE_P 0.24
+param set-default MC_PITCHRATE_I 0.09
+param set-default MC_PITCHRATE_D 0.013
+param set-default MC_PITCHRATE_MAX 180
+
+param set-default MC_ROLL_P 4
+param set-default MC_ROLLRATE_P 0.16
+param set-default MC_ROLLRATE_I 0.07
+param set-default MC_ROLLRATE_D 0.009
+param set-default MC_ROLLRATE_MAX 180
+
+param set-default MC_YAW_P 3
+
+param set-default MPC_HOLD_MAX_XY 0.25
+param set-default MPC_THR_MIN 0.15
+param set-default MPC_Z_VEL_MAX_DN 2
+
+param set-default BAT1_N_CELLS 4
+
+set MIXER octo_cox_w
+
+set PWM_OUT 12345678
@@ -0,0 +1,37 @@
+#!/bin/sh
+#
+# @name CruiseAder Claire
+#
+# @type VTOL Tiltrotor
+# @class VTOL
+#
+# @maintainer Samay Siga <samay_s@icloud.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default MAV_TYPE 21
+
+param set-default PWM_AUX_DISARM 1000
+param set-default PWM_AUX_MAX 2000
+param set-default PWM_AUX_MIN 1000
+param set-default PWM_AUX_RATE 50
+
+param set-default PWM_MAIN_MAX 2000
+
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 13
+param set-default VT_IDLE_PWM_MC 1080
+param set-default VT_TILT_FW 0.9
+param set-default VT_TILT_MC 0.08
+param set-default VT_TILT_TRANS 0.5
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 1
+
+set MIXER claire
+set MIXER_AUX claire
+
+set PWM_OUT 1234
@@ -69,9 +69,4 @@ param set-default VT_TYPE 1

 set MIXER vtol_convergence

-if ! ver hwcmp MATEK_H743
-then
-	set PWM_OUT 1234
-else
-	set PWM_OUT 3456
-fi	
+set PWM_OUT 1234
@@ -131,6 +131,7 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
+param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

@@ -62,7 +62,7 @@ param set-default MPC_JERK_AUTO 4
 param set-default MPC_LAND_SPEED 1
 param set-default MPC_MAN_TILT_MAX 25
 param set-default MPC_MAN_Y_MAX 40
-param set-default COM_SPOOLUP_TIME 1.5
+param set-default MPC_SPOOLUP_TIME 1.5
 param set-default MPC_THR_HOVER 0.45
 param set-default MPC_TILTMAX_AIR 25
 param set-default MPC_TKO_RAMP_T 1.8
@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name IO Camflyer
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 15
+param set-default FW_AIRSPD_TRIM 13
+param set-default FW_R_TC 0.3
+param set-default FW_P_TC 0.3
+param set-default FW_L1_DAMPING 0.74
+param set-default FW_L1_PERIOD 16
+param set-default FW_LND_ANG 15
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_HVIRT 13
+param set-default FW_LND_TLALT 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_PR_FF 0.35
+param set-default FW_RR_FF 0.6
+param set-default FW_RR_P 0.04
+
+param set-default PWM_MAIN_DISARM 1000
+
+
+set MIXER fw_generic_wing
+
+# Provide ESC a constant 1000 us pulse while disarmed
+set PWM_OUT 4
@@ -0,0 +1,29 @@
+#!/bin/sh
+#
+# @name FX-79 Buffalo Flying Wing
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 right aileron
+# @output MAIN2 left aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_AIRSPD_MAX 30
+param set-default FW_AIRSPD_MIN 13
+
+param set-default NAV_LOITER_RAD 150
+
+set MIXER fw_generic_wing
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Viper
+#
+# @type Flying Wing
+# @class Plane
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Simon Wilks <simon@uaventure.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER Viper
@@ -0,0 +1,53 @@
+#!/bin/sh
+#
+# @name Modified Parrot Disco
+#
+# @url
+#
+# @type Flying Wing
+# @class Plane
+#
+# @output MAIN1 left aileron
+# @output MAIN2 right aileron
+# @output MAIN4 throttle
+#
+# @output AUX1 feed-through of RC AUX1 channel
+# @output AUX2 feed-through of RC AUX2 channel
+# @output AUX3 feed-through of RC AUX3 channel
+#
+# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+####################################
+# Airspeed
+####################################
+param set-default FW_AIRSPD_MAX  27 # = 52 knots
+
+####################################
+# Pitch
+####################################
+
+# Pitch rate feed forward (def = 0.5 %/rad/sec)
+param set-default FW_PR_FF 0.35
+
+####################################
+# Roll
+####################################
+
+# Basic limits (def = 50 deg)
+param set-default FW_R_LIM 40
+
+# Roll rate upper limit (def = 70 deg/s)
+param set-default FW_R_RMAX 50
+
+param set-default PWM_MAIN_DISARM 1000
+
+set MIXER fw_generic_wing.main.mix
+
+# Provide ESC a constant 1000 us pulse
+set PWM_OUT 4
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# @name DJI F330 w/ DJI ESCs
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+
+
+# DJI ESCs do not support calibration and need a higher min
+param set-default PWM_MAIN_MIN 1230
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# @name DJI F450 w/ DJI ESCs
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Lorenz Meier <lorenz@px4.io>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MC_ROLL_P 7
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_PITCH_P 7
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_YAWRATE_P 0.3
+
+# DJI ESCs do not support calibration and need a higher min
+param set-default PWM_MAIN_MIN 1230
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name PX4 Vision DevKit Platform
+# @name PX4 Vision Dev Kit v1
 #
 # @type Quadrotor x
 # @class Copter
@@ -104,6 +104,7 @@ param set-default SDLOG_PROFILE 131
 param set-default SENS_CM8JL65_CFG 104
 param set-default SENS_FLOW_MAXHGT 25
 param set-default SENS_FLOW_MINHGT 0.5
+param set-default SENS_FLOW_ROT 0
 param set-default IMU_GYRO_CUTOFF 100
 param set-default SENS_EN_PMW3901 1

@@ -0,0 +1,134 @@
+#!/bin/sh
+#
+# @name PX4 Vision Dev Kit v1.5
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+# System parameters
+# use FMU motor outputs for less delay in the rate control loop
+param set-default SYS_USE_IO 0
+
+# Commander Parameters
+param set-default COM_OBS_AVOID 1
+param set-default COM_DISARM_LAND 0.5
+
+# EKF2 parameters
+param set-default EKF2_AID_MASK 35
+param set-default EKF2_IMU_POS_X 0.02
+param set-default EKF2_GPS_POS_X 0.055
+param set-default EKF2_GPS_POS_Z -0.15
+param set-default EKF2_MIN_RNG 0.03
+param set-default EKF2_OF_POS_X 0.055
+param set-default EKF2_OF_POS_Y 0.02
+param set-default EKF2_OF_POS_Z 0.065
+param set-default EKF2_REQ_HDRIFT 0.3
+param set-default EKF2_REQ_SACC 1
+param set-default EKF2_REQ_VDRIFT 0.3
+param set-default EKF2_RNG_A_HMAX 8
+param set-default EKF2_RNG_A_VMAX 2
+param set-default EKF2_RNG_POS_X 0.055
+param set-default EKF2_RNG_POS_Y -0.01
+param set-default EKF2_RNG_POS_Z 0.065
+param set-default EKF2_PCOEF_XP -0.25
+param set-default EKF2_PCOEF_YN -0.55
+param set-default EKF2_PCOEF_YP -0.55
+
+# MAVLink parameters
+param set-default MAV_0_CONFIG 101
+param set-default MAV_1_CONFIG 102
+param set-default MAV_1_RATE 80000
+param set-default MAV_1_MODE 9
+param set-default SER_TEL1_BAUD 921600
+
+# Vehicle attitude PID tuning
+param set-default MC_ACRO_EXPO 0
+param set-default MC_ACRO_EXPO_Y 0
+param set-default MC_ACRO_P_MAX 200
+param set-default MC_ACRO_R_MAX 200
+param set-default MC_ACRO_SUPEXPO 0
+param set-default MC_ACRO_SUPEXPOY 0
+param set-default MC_ACRO_Y_MAX 150
+param set-default MC_PITCHRATE_D 0.0015
+param set-default MC_ROLLRATE_D 0.0015
+param set-default MC_YAWRATE_P 0.3
+
+# Position Control Tuning
+param set-default CP_DIST 6
+param set-default MPC_ACC_DOWN_MAX 5
+param set-default MPC_ACC_HOR_MAX 10
+param set-default MPC_ACC_UP_MAX 4
+param set-default MPC_MANTHR_MIN 0
+param set-default MPC_MAN_Y_MAX 120
+param set-default MPC_TILTMAX_AIR 45
+param set-default MPC_THR_HOVER 0.3
+param set-default MPC_TKO_SPEED 1
+param set-default MPC_VEL_MANUAL 5
+param set-default MPC_XY_CRUISE 5
+param set-default MPC_XY_VEL_MAX 5
+param set-default MPC_XY_VEL_P_ACC 1.58
+param set-default MPC_XY_TRAJ_P 0.3
+param set-default MPC_Z_TRAJ_P 0.3
+param set-default MPC_Z_VEL_P_ACC 5
+param set-default MPC_Z_VEL_I_ACC 3
+param set-default MPC_LAND_ALT1 3
+param set-default MPC_LAND_ALT2 1
+param set-default MPC_POS_MODE 3
+param set-default CP_GO_NO_DATA 1
+
+# Navigator Parameters
+param set-default NAV_ACC_RAD 2
+
+# use oneshot motor output protocol
+param set-default PWM_MAIN_RATE 0
+
+# RTL Parameters
+param set-default RTL_DESCEND_ALT 5
+param set-default RTL_RETURN_ALT 5
+
+# Logging Parameters
+param set-default SDLOG_PROFILE 131
+
+# Sensors Parameters
+param set-default SENS_CM8JL65_CFG 202
+param set-default SENS_FLOW_MAXHGT 25
+param set-default SENS_FLOW_MINHGT 0.5
+param set-default IMU_GYRO_CUTOFF 100
+param set-default SENS_TFLOW_CFG 103
+
+# Power Parameters
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_A_PER_V 36.364
+param set-default BAT1_V_DIV 18.182
+
+# Circuit breakers
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default THR_MDL_FAC 0.3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+# Outputs
+param set-default PWM_AUX_FUNC1 101
+param set-default PWM_AUX_FUNC2 102
+param set-default PWM_AUX_FUNC3 103
+param set-default PWM_AUX_FUNC4 104
+
@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# @name DJI Matrice 100
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer James Goppert <james.goppert@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default BAT1_N_CELLS 6
+
+param set-default MC_ROLLRATE_P 0.05
+param set-default MC_ROLLRATE_I 0.05
+param set-default MC_ROLLRATE_D 0.001
+param set-default MC_PITCHRATE_P 0.05
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCHRATE_D 0.001
+
+param set-default MC_YAWRATE_I 0
+
+param set-default PWM_MAIN_MIN 1200
@@ -47,7 +47,6 @@ param set-default COM_RC_LOSS_T 3

 # ekf2
 param set-default EKF2_AID_MASK 33
-param set-default EKF2_TERR_MASK 1
 param set-default EKF2_BARO_DELAY 0
 param set-default EKF2_BARO_NOISE 2.0

@@ -174,7 +173,7 @@ param set-default RC1_TRIM          1000
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
 param set-default SENS_FLOW_MAXHGT 5.0
-param set-default SENS_FLOW_ROT 0
+param set-default SENS_FLOW_ROT    0

 # ignore the SD card errors and use normal startup sound
 set STARTUP_TUNE "1"
@@ -52,21 +52,28 @@ px4_add_romfs_files(

 	# [3000, 3999] Flying wing"
 	3000_generic_wing
+	3030_io_camflyer
 	3031_phantom
 	3032_skywalker_x5
 	3033_wingwing
+	3034_fx79
+	3035_viper
 	3036_pigeon
+	3037_parrot_disco_mod
 	3100_tbs_caipirinha

 	# [4000, 4999] Quadrotor x"
 	4001_quad_x
 	4003_qavr5
 	4009_qav250
+	4010_dji_f330
+	4011_dji_f450
 	4014_s500
 	4015_holybro_s500
 	4016_holybro_px4vision
 	4017_nxp_hovergames
 	4019_x500_v2
+	4020_holybro_px4vision_v1_5
 	4030_3dr_solo
 	4031_3dr_quad
 	4040_reaper
@@ -75,6 +82,7 @@ px4_add_romfs_files(
 	4051_s250aq
 	4052_holybro_qav250
 	4053_holybro_kopis2
+	4060_dji_matrice_100
 	4061_atl_mantis_edu
 	4071_ifo
 	4072_draco
@@ -105,6 +113,7 @@ px4_add_romfs_files(
 	# [10000, 10999] Quadrotor Wide arm / H frame"
 	10015_tbs_discovery
 	10016_3dr_iris
+	10017_steadidrone_qu4d
 	10018_tbs_endurance

 	# [11000, 11999] Hexa Cox
@@ -112,6 +121,7 @@ px4_add_romfs_files(

 	# [12000, 12999] Octo Cox
 	12001_octo_cox
+	12002_steadidrone_mavrik

 	# [13000, 13999] VTOL
 	13000_generic_vtol_standard
@@ -124,6 +134,7 @@ px4_add_romfs_files(
 	13007_vtol_AAVVT_quad
 	13008_QuadRanger
 	13009_vtol_spt_ranger
+	13010_claire
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark
@@ -17,17 +17,21 @@ set OUTPUT_DEV none
 set OUTPUT_AUX_DEV /dev/pwm_output1
 set OUTPUT_EXTRA_DEV /dev/pwm_output0

-# set these before starting the modules
+# set ESC mask before starting the modules
+# setting the numeric parameter to "none" would make the startup script fail
 if [ $PWM_AUX_OUT != none ]
 then
-
 	param set PWM_AUX_OUT ${PWM_AUX_OUT}
+else
+	param set PWM_AUX_OUT 0
 fi


 if [ $PWM_OUT != none ]
 then
 	param set PWM_MAIN_OUT ${PWM_OUT}
+else
+	param set PWM_AUX_OUT 0
 fi

 #
@@ -21,6 +21,7 @@ set +e
 # it wastes flash
 #
 set R /
+set AUTOCNF no
 set FCONFIG /fs/microsd/etc/config.txt
 set FEXTRAS /fs/microsd/etc/extras.txt
 set FRC /fs/microsd/etc/rc.txt
@@ -170,18 +171,19 @@ else
 		param select-backup /fs/microsd/parameters_backup.bson
 	fi

-	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X
+	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X ARK_FMU_V6X
 	then
 		netman update -i eth0
 	fi

 	#
-	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
+	# Set AUTOCNF flag to use it in AUTOSTART scripts.
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
-		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
+		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
+		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
+		set AUTOCNF yes
 	fi

 	#
@@ -273,25 +275,11 @@ else
 	fi

 	#
-	# Check if UAVCAN is enabled, default to it for ESCs.
+	# If autoconfig parameter was set, reset it and save parameters.
 	#
-	if param greater -s UAVCAN_ENABLE 0
+	if [ $AUTOCNF = yes ]
 	then
-		# Start core UAVCAN module.
-		if uavcan start
-		then
-			if param greater UAVCAN_ENABLE 2
-			then
-				set OUTPUT_MODE uavcan_esc
-			fi
-		else
-			tune_control play error
-		fi
-	else
-		if param greater -s CYPHAL_ENABLE 0
-		then
-			cyphal start
-		fi
+		param set SYS_AUTOCONFIG 0
 	fi

 	#
@@ -546,6 +534,28 @@ else
 	fi
 	unset BOARD_BOOTLOADER_UPGRADE

+	#
+	# Check if UAVCAN is enabled, default to it for ESCs.
+	#
+	if param greater -s UAVCAN_ENABLE 0
+	then
+		# Start core UAVCAN module.
+		if uavcan start
+		then
+			if param greater UAVCAN_ENABLE 2
+			then
+				set OUTPUT_MODE uavcan_esc
+			fi
+		else
+			tune_control play error
+		fi
+	else
+		if param greater -s UAVCAN_V1_ENABLE 0
+		then
+			uavcan_v1 start
+		fi
+	fi
+
 #
 # End of autostart.
 #
@@ -555,6 +565,7 @@ fi
 # Unset all script parameters to free RAM.
 #
 unset R
+unset AUTOCNF
 unset FCONFIG
 unset FEXTRAS
 unset FRC
@@ -21,16 +21,14 @@ O:      10000  10000      0 -10000  10000
 S: 0 3      0  20000 -10000 -10000  10000

 # mixer for the left aileron
-M: 2
+M: 1
 O:      10000  10000   0 -10000  10000
 S: 0 0  -10000  -10000    0 -10000  10000
-S: 0 5   10000   10000    0 -10000  10000

 # mixer for the right aileron
-M: 2
+M: 1
 O:      10000  10000   0 -10000  10000
 S: 0 0  10000  10000    0 -10000  10000
-S: 0 5  10000  10000    0 -10000  10000

 # mixer for the elevator
 M: 1
@@ -8,22 +8,22 @@ R: 4x
 # tilt servo motor 1
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # tilt servo motor 2
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # tilt servo motor 3
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # tilt servo motor 4
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # mixer for the left aileron
 M: 1
@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -20,11 +20,11 @@ endpoints to suit.

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 Elevator mixer
 ------------
@@ -11,7 +11,7 @@ to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,11 +21,11 @@ endpoints to suit.

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -9,20 +9,20 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw), 3 (thrust) 4 (flaps), 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up mechanically reversed.

 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -40,6 +40,8 @@ px4_add_romfs_files(
 	babyshark.main.mix
 	blade130.main.mix
 	CCPM.main.mix
+	claire.aux.mix
+	claire.main.mix
 	cloudship.main.mix
 	coax.main.mix
 	delta.main.mix
@@ -81,6 +83,7 @@ px4_add_romfs_files(
 	tri_y_yaw-.main.mix
 	uuv_x.main.mix
 	vectored6dof.main.mix
+	Viper.main.mix
 	vtol_AAERT.aux.mix
 	vtol_AAVVT.aux.mix
 	vtol_TTTTAAER.aux.mix
@@ -0,0 +1,66 @@
+Viper Delta-wing mixer
+=================================
+# @board px4_fmu-v2 exclude
+
+Designed for Viper.
+
+TODO (sjwilks): Add mixers for flaps.
+
+This file defines mixers suitable for controlling a delta wing aircraft using
+PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
+servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
+assumed to be unused.
+
+Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
+(roll), 1 (pitch) and 3 (thrust).
+
+See the README for more information on the scaler format.
+
+Elevon mixers
+-------------
+Three scalers total (output, roll, pitch).
+
+On the assumption that the two elevon servos are physically reversed, the pitch
+input is inverted between the two servos.
+
+The scaling factor for roll inputs is adjusted to implement differential travel
+for the elevons.
+
+M: 2
+S: 0 0   7500   7500      0 -10000  10000
+S: 0 1   8000   8000      0 -10000  10000
+
+M: 2
+S: 0 0   7500   7500      0 -10000  10000
+S: 0 1  -8000  -8000      0 -10000  10000
+
+Output 2
+--------
+This mixer is empty.
+
+Z:
+
+Motor speed mixer
+-----------------
+Two scalers total (output, thrust).
+
+This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
+range.  Inputs below zero are treated as zero.
+
+M: 1
+S: 0 3      0  20000 -10000 -10000  10000
+
+Inputs to the mixer come from channel group 2 (payload), channels 0
+(bay servo 1), 1 (bay servo 2) and 3 (drop release).
+-----------------------------------------------------
+
+M: 1
+S: 2 0  10000  10000      0 -10000  10000
+
+M: 1
+S: 2 1  10000  10000      0 -10000  10000
+
+M: 1
+S: 2 2  -8000  -8000      0 -10000  10000
+
+
@@ -0,0 +1,28 @@
+# mixer for the CruiseAder Claire tilt mechansim servo and elevons
+
+=======================================================================
+
+
+Tilt mechanism servo mixer
+
+---------------------------
+
+M: 1
+
+
+S: 1 4  10000  10000      0 -10000  10000
+
+
+
+Elevon mixers
+
+-------------
+
+M: 2
+
+S: 1 0   7500   7500      0 -10000  10000
+S: 1 1   7500   7500      0 -10000  10000
+
+M: 2
+S: 1 0    7500    7500    0 -10000  10000
+S: 1 1   -7500   -7500    0 -10000  10000
@@ -0,0 +1,8 @@
+# CruiseAder Claire Main Multirotor mixer for PX4FMU
+# @board px4_fmu-v2 exclude
+
+#
+
+#===========================
+
+R: 4x
@@ -6,7 +6,7 @@
 Tilt mechanism servo mixer
 ---------------------------
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 Elevon mixers
 -------------
@@ -5,14 +5,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU

 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU
+The configuration assumes the aileron servos are connected to PX4FMU 
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,11 +22,11 @@ endpoints to suit.

 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 5  10000  10000      0 -10000  10000
+S: 1 6  10000  10000      0 -10000  10000

 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 5 -10000 -10000      0 -10000  10000
+S: 1 6 -10000 -10000      0 -10000  10000


 V-tail mixers
@@ -6,19 +6,19 @@
 ---------------------------
 # front left up:2000 down:1000
 M: 1
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000

 # front right up:1000 down:2000
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000

 # rear left up:2000 down:1000
 M: 1
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000

 # rear right up:1000 down:2000
 M: 1
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000


 # Aileron mixer
@@ -10,12 +10,12 @@ Tilt mechanism servo mixer
 ---------------------------
 #RIGHT up:2000 down:1000
 M: 2
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 Elevon mixers
@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 Elevator mixer
 ------------
@@ -9,9 +9,9 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,12 +22,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5  10000  10000      0 -10000  10000
+S: 0 6  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 5 -10000 -10000      0 -10000  10000
+S: 0 6 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0 -20000   9000 -10000  10000
+S: 1 4      0 -20000   9000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000  -10000 -10000  10000
+S: 1 4      0  20000  -10000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000

 Elevon mixers
@@ -3,14 +3,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU

 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU
+The configuration assumes the aileron servos are connected to PX4FMU 
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + spoiler)
+Aileron mixer (roll + flaperon)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 5  10000  10000      0 -10000  10000
+S: 1 6  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 5 -10000 -10000      0 -10000  10000
+S: 1 6 -10000 -10000      0 -10000  10000


 V-tail mixers
@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0 -20000  10000 -10000  10000
+S: 1 4      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 8      0  20000 -10000 -10000  10000
+S: 1 4      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 Elevon mixers
@@ -95,7 +95,7 @@ def do_nsh_cmd(port_url, baudrate, cmd):


    timeout_start = time.monotonic()
-    timeout = 600 # 10 minutes
+    timeout = 240 # 4 minutes

    return_code = 0

@@ -8,24 +8,24 @@ if [ $# -gt 0 ]; then
 fi

 exec find boards msg src platforms test \
-    -not -path "msg/templates/urtps/*" \
-    -not -path "platforms/nuttx/NuttX/*" \
-    -not -path "platforms/qurt/dspal/*" \
-    -not -path "src/drivers/gps/devices/*" \
-    -not -path "src/drivers/uavcan/libuavcan/*" \
-    -not -path "src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis/*" \
-    -not -path "src/drivers/cyphal/libcanard/*" \
-    -not -path "src/lib/crypto/monocypher/*" \
-    -not -path "src/lib/events/libevents/*" \
-    -not -path "src/lib/parameters/uthash/*" \
-    -not -path "src/modules/ekf2/EKF/*" \
-    -not -path "src/modules/gyro_fft/CMSIS_5/*" \
-    -not -path "src/modules/mavlink/mavlink/*" \
-    -not -path "src/modules/micrortps_bridge/micro-CDR/*" \
-    -not -path "src/modules/micrortps_bridge/microRTPS_client/*" \
-    -not -path "test/mavsdk_tests/catch2/*" \
-    -not -path "src/lib/crypto/monocypher/*" \
-    -not -path "src/lib/crypto/libtomcrypt/*" \
-    -not -path "src/lib/crypto/libtommath/*" \
-    -not -path "src/modules/microdds_client/Micro-XRCE-DDS-Client/*" \
+    -path msg/templates/urtps -prune -o \
+    -path platforms/nuttx/NuttX -prune -o \
+    -path platforms/qurt/dspal -prune -o \
+    -path src/drivers/uavcan/libuavcan -prune -o \
+    -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
+    -path src/drivers/uavcan_v1/libcanard -prune -o \
+    -path src/drivers/uavcannode_gps_demo/libcanard -prune -o \
+    -path src/lib/crypto/monocypher -prune -o \
+    -path src/lib/events/libevents -prune -o \
+    -path src/lib/parameters/uthash -prune -o \
+    -path src/modules/ekf2/EKF -prune -o \
+    -path src/modules/gyro_fft/CMSIS_5 -prune -o \
+    -path src/modules/mavlink/mavlink -prune -o \
+    -path src/modules/micrortps_bridge/micro-CDR -prune -o \
+    -path src/modules/micrortps_bridge/microRTPS_client -prune -o \
+    -path test/mavsdk_tests/catch2 -prune -o \
+    -path src/lib/crypto/monocypher -prune -o \
+    -path src/lib/crypto/libtomcrypt -prune -o \
+    -path src/lib/crypto/libtommath -prune -o \
+    -path src/modules/microdds_client/Micro-XRCE-DDS-Client -prune -o \
    -type f \( -name "*.c" -o -name "*.h" -o -name "*.cpp" -o -name "*.hpp" \) | grep $PATTERN
@@ -5,13 +5,12 @@ set -e
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 cd "$SCRIPT_DIR/jMAVSim"

-port=4560
+tcp_port=4560
 extra_args=
 baudrate=921600
 device=
 ip="127.0.0.1"
-protocol="tcp"
-while getopts ":b:d:u:p:qsr:f:i:loat" opt; do
+while getopts ":b:d:p:qsr:f:i:loat" opt; do
 	case $opt in
 		b)
 			baudrate=$OPTARG
@@ -19,14 +18,11 @@ while getopts ":b:d:u:p:qsr:f:i:loat" opt; do
 		d)
 			device="$OPTARG"
 			;;
-		u)
-			protocol="udp"
-			;;
 		i)
 			ip="$OPTARG"
 			;;
 		p)
-			port=$OPTARG
+			tcp_port=$OPTARG
 			;;
 		q)
 			extra_args="$extra_args -qgc"
@@ -57,11 +53,7 @@ while getopts ":b:d:u:p:qsr:f:i:loat" opt; do
 done

 if [ "$device" == "" ]; then
-	if [ "$protocol" == "tcp" ]; then
-		device="-tcp $ip:$port"
-	else
-		device="-udp $port"
-	fi
+	device="-tcp $ip:$tcp_port"
 else
 	device="-serial $device $baudrate"
 fi
@@ -0,0 +1,72 @@
+#!/bin/python3
+
+import parse_cmake.parsing as cmp
+import glob
+import pprint
+import re
+import os
+
+__location__ = os.path.realpath(
+    os.path.join(os.getcwd(), os.path.dirname(__file__)))
+
+serial_regex = r"(\D\D\D\d):(/dev/ttyS\d+)"
+io_regex = r"IO (.*)"
+romfs_regex = r"ROMFSROOT (.*)"
+arch_regex = r"ARCHITECTURE (.*)"
+toolchain_regex = r"TOOLCHAIN (.*)"
+
+
+
+def stripComments(code):
+    code = str(code)
+    return re.sub(r'(?m) *#.*\n?', '', code)
+
+lut = {}
+with open(os.path.join(__location__, "cmake_kconfig_lut.txt"),'r') as lookup:
+    for line in lookup:
+        if ',' in line:
+            key, value = line.strip().split(',')
+            lut[key] = value
+
+#for name in glob.glob('boards/*/*/*.cmake'):
+px4_dir = os.path.abspath(os.path.join(os.path.dirname(__file__), '../../'))
+
+for name in glob.glob(px4_dir + '/boards/*/*/*.cmake'):
+    print(name)
+    with open(name, 'r') as f:
+        romfs_set = False
+        w = open(name.replace(".cmake",".px4board"), "w")
+        for line in f:
+            clean_line = stripComments(line.strip())
+            value = lut.get(clean_line)
+            if value is not None:
+                print(value, file=w)
+                print(value)
+            else:
+                matches = re.finditer(serial_regex, clean_line, re.MULTILINE)
+                for matchNum, match in enumerate(matches, start=1):
+                    print("CONFIG_BOARD_SERIAL_" + match.groups()[0] + "=\"" + match.groups()[1] + "\"")
+                    print("CONFIG_BOARD_SERIAL_" + match.groups()[0] + "=\"" + match.groups()[1] + "\"", file=w)
+                matches = re.finditer(io_regex, clean_line, re.MULTILINE)
+                for matchNum, match in enumerate(matches, start=1):
+                    print("CONFIG_BOARD_IO=\"" + match.groups()[0] + "\"")
+                    print("CONFIG_BOARD_IO=\"" + match.groups()[0] + "\"", file=w)
+                matches = re.finditer(romfs_regex, clean_line, re.MULTILINE)
+                for matchNum, match in enumerate(matches, start=1):
+                    print("CONFIG_BOARD_ROMFSROOT=\"" + match.groups()[0] + "\"")
+                    print("CONFIG_BOARD_ROMFSROOT=\"" + match.groups()[0] + "\"", file=w)
+                    romfs_set = True
+                matches = re.finditer(arch_regex, clean_line, re.MULTILINE)
+                for matchNum, match in enumerate(matches, start=1):
+                    print("CONFIG_BOARD_ARCHITECTURE=\"" + match.groups()[0] + "\"")
+                    print("CONFIG_BOARD_ARCHITECTURE=\"" + match.groups()[0] + "\"", file=w)
+                matches = re.finditer(toolchain_regex, clean_line, re.MULTILINE)
+                for matchNum, match in enumerate(matches, start=1):
+                    print("CONFIG_BOARD_TOOLCHAIN=\"" + match.groups()[0] + "\"")
+                    print("CONFIG_BOARD_TOOLCHAIN=\"" + match.groups()[0] + "\"", file=w)
+
+    if(romfs_set == False):
+        print("CONFIG_BOARD_ROMFSROOT=\"\"", file=w)
+
+
+    w.close()
@@ -0,0 +1,204 @@
+PLATFORM nuttx,CONFIG_PLATFORM_NUTTX=y
+PLATFORM posix,CONFIG_PLATFORM_POSIX=y
+CONSTRAINED_MEMORY,CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONSTRAINED_FLASH,CONFIG_BOARD_CONSTRAINED_FLASH=y
+NO_HELP,CONFIG_BOARD_NO_HELP=y
+EXTERNAL_METADATA,CONFIG_BOARD_EXTERNAL_METADATA=y
+BUILD_BOOTLOADER,CONFIG_BOARD_BUILD_BOOTLOADER=y
+UAVCAN_INTERFACES 2,CONFIG_BOARD_UAVCAN_INTERFACES=2
+UAVCAN_INTERFACES 1,CONFIG_BOARD_UAVCAN_INTERFACES=1
+UAVCAN_TIMER_OVERRIDE 2,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
+UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=1
+UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=0
+TESTING,CONFIG_BOARD_TESTING=y
+ETHERNET,CONFIG_BOARD_ETHERNET=y
+adc/ads1115,CONFIG_DRIVERS_ADC_ADS1115=y
+adc/board_adc,CONFIG_DRIVERS_ADC_BOARD_ADC=y
+barometer,CONFIG_COMMON_BAROMETERS=y
+barometer/bmp280,CONFIG_DRIVERS_BAROMETER_BMP280=y
+barometer/bmp388,CONFIG_DRIVERS_BAROMETER_BMP388=y
+barometer/dps310,CONFIG_DRIVERS_BAROMETER_DPS310=y
+barometer/lps22hb,CONFIG_DRIVERS_BAROMETER_LPS22HB=y
+barometer/lps25h,CONFIG_DRIVERS_BAROMETER_LPS25H=y
+barometer/lps33hw,CONFIG_DRIVERS_BAROMETER_LPS33HW=y
+barometer/mpl3115a2,CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
+barometer/ms5611,CONFIG_DRIVERS_BAROMETER_MS5611=y
+barometer/tcbp001ta,CONFIG_DRIVERS_BAROMETER_TCBP001TA=y
+batt_smbus,CONFIG_DRIVERS_BATT_SMBUS=y
+bootloaders,CONFIG_DRIVERS_BOOTLOADERS=y
+camera_capture,CONFIG_DRIVERS_CAMERA_CAPTURE=y
+camera_trigger,CONFIG_DRIVERS_CAMERA_TRIGGER=y
+differential_pressure,CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE=y
+distance_sensor,CONFIG_COMMON_DISTANCE_SENSOR=y
+distance_sensor/ll40ls,CONFIG_DRIVERS_DISTANCE_SENSOR_LL40LS=y
+distance_sensor/lightware_laser_serial,CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_SERIAL=y
+distance_sensor/broadcom/afbrs50,CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
+distance_sensor/vl53l0x,CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
+distance_sensor/vl53l1x,CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L1X=y
+distance_sensor/srf05,CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
+dshot,CONFIG_DRIVERS_DSHOT=y
+gps,CONFIG_DRIVERS_GPS=y
+heater,CONFIG_DRIVERS_HEATER=y
+imu,CONFIG_COMMON_IMU=y
+imu/adis16477,CONFIG_DRIVERS_IMU_ADIS16477=y
+imu/adis16497,CONFIG_DRIVERS_IMU_ADIS16497=y
+imu/analog_devices/adis16448,CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
+imu/analog_devices/adis16470,CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16470=y
+imu/bosch/bmi055,CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
+imu/bosch/bmi088,CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
+imu/fxas21002c,CONFIG_DRIVERS_IMU_FXAS21002C=y
+imu/fxos8701cq,CONFIG_DRIVERS_IMU_FXOS8701CQ=y
+imu/invensense/icm20602,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
+imu/invensense/icm20608g,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20608G=y
+imu/invensense/icm20649,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20649=y
+imu/invensense/icm20689,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
+imu/invensense/icm20948,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
+imu/invensense/icm40609d,CONFIG_DRIVERS_IMU_INVENSENSE_ICM40609D=y
+imu/invensense/icm42605,CONFIG_DRIVERS_IMU_INVENSENSE_ICM42605=y
+imu/invensense/icm42688p,CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+imu/invensense/mpu6000,CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
+imu/invensense/mpu6500,CONFIG_DRIVERS_IMU_INVENSENSE_MPU6500=y
+imu/invensense/mpu9250,CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
+imu/l3gd20,CONFIG_DRIVERS_IMU_L3GD20=y
+imu/lsm303d,CONFIG_DRIVERS_IMU_LSM303D=y
+imu/st,CONFIG_DRIVERS_IMU_ST=y
+irlock,CONFIG_DRIVERS_IRLOCK=y
+lights,CONFIG_COMMON_LIGHT=y
+lights/neopixel,CONFIG_DRIVERS_LIGHTS_NEOPIXEL=y
+lights/rgbled,CONFIG_DRIVERS_LIGHTS_RGBLED=y
+lights/rgbled_ncp5623c,CONFIG_DRIVERS_LIGHTS_RGBLED_NCP5623C=y
+lights/rgbled_pwm,CONFIG_DRIVERS_LIGHTS_RGBLED_PWM=y
+magnetometer,CONFIG_COMMON_MAGNETOMETER=y
+magnetometer/akm/ak09916,CONFIG_DRIVERS_MAGNETOMETER_AKM_AK09916=y
+magnetometer/akm/ak8963,CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
+magnetometer/bosch/bmm150,CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
+magnetometer/hmc5883,CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
+magnetometer/isentek/ist8308,CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8308=y
+magnetometer/isentek/ist8310,CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
+magnetometer/lis2mdl,CONFIG_DRIVERS_MAGNETOMETER_LIS2MDL=y
+magnetometer/lis3mdl,CONFIG_DRIVERS_MAGNETOMETER_LIS3MDL=y
+magnetometer/lsm303agr,CONFIG_DRIVERS_MAGNETOMETER_LSM303AGR=y
+magnetometer/lsm9ds1_mag,CONFIG_DRIVERS_MAGNETOMETER_LSM9DS1_MAG=y
+magnetometer/qmc5883l,CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
+magnetometer/rm3100,CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
+magnetometer/vtrantech/vcm1193l,CONFIG_DRIVERS_MAGNETOMETER_VTRANTECH_VCM1193L=y
+optical_flow,CONFIG_COMMON_OPTICAL_FLOW=y
+optical_flow/paw3902,CONFIG_DRIVERS_OPTICAL_FLOW_PAW3902=y
+optical_flow/paw3901,CONFIG_DRIVERS_OPTICAL_FLOW_PMW3901=y
+optical_flow/px4flow,CONFIG_DRIVERS_OPTICAL_FLOW_PX4FLOW=y
+optical_flow/thoneflow,CONFIG_DRIVERS_OPTICAL_FLOW_THONEFLOW=y
+osd,CONFIG_DRIVERS_OSD=y
+pca9685,CONFIG_DRIVERS_PCA9685=y
+pca9685_pwm_out,CONFIG_DRIVERS_PCA9685_PWM_OUT=y
+power_monitor/ina226,CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+power_monitor/voxlpm,CONFIG_DRIVERS_POWER_MONITOR_VOXLPM=y
+pps_capture,CONFIG_DRIVERS_PPS_CAPTURE=y
+protocol_splitter,CONFIG_DRIVERS_PROTOCOL_SPLITTER=y
+pwm_input,CONFIG_DRIVERS_PWM_INPUT=y
+pwm_out_sim,CONFIG_DRIVERS_PWM_OUT_SIM=y
+pwm_out,CONFIG_DRIVERS_PWM_OUT=y
+px4io,CONFIG_DRIVERS_PX4IO=y
+rc_input,CONFIG_DRIVERS_RC_INPUT=y
+roboclaw,CONFIG_DRIVERS_ROBOCLAW=y
+rpi_rc_in,CONFIG_DRIVERS_RPI_RC_IN=y
+rpm,CONFIG_DRIVERS_RPM=y
+safety_button,CONFIG_DRIVERS_SAFETY_BUTTON=y
+smart_battery/batmon,CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
+spektrum_rc,CONFIG_DRIVERS_SPEKTRUM_RC=y
+telemetry,CONFIG_DRIVERS_TELEMETRY=y
+test_ppm,CONFIG_DRIVERS_TEST_PPM=y
+tone_alarm,CONFIG_DRIVERS_TONE_ALARM=y
+uavcan,CONFIG_DRIVERS_UAVCAN=y
+uavcannode,CONFIG_DRIVERS_UAVCANNODE=y
+uavcannode_gps_demo,CONFIG_DRIVERS_UAVCANNODE_GPS_DEMO=y
+airship_att_control,CONFIG_MODULES_AIRSHIP_ATT_CONTROL=y
+airspeed_selector,CONFIG_MODULES_AIRSPEED_SELECTOR=y
+velocity_controller,CONFIG_MODULES_ANGULAR_VELOCITY_CONTROLLER=y
+attitude_estimator_q,CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
+battery_status,CONFIG_MODULES_BATTERY_STATUS=y
+camera_feedback,CONFIG_MODULES_CAMERA_FEEDBACK=y
+commander,CONFIG_MODULES_COMMANDER=y
+control_allocator,CONFIG_MODULES_CONTROL_ALLOCATOR=y
+dataman,CONFIG_MODULES_DATAMAN=y
+ekf2,CONFIG_MODULES_EKF2=y
+esc_battery,CONFIG_MODULES_ESC_BATTERY=y
+events,CONFIG_MODULES_EVENTS=y
+flight_mode_manager,CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+fw_att_control,CONFIG_MODULES_FW_ATT_CONTROL=y
+fw_pos_control_l1,CONFIG_MODULES_FW_POS_CONTROL_L1=y
+gyro_calibration,CONFIG_MODULES_GYRO_CALIBRATION=y
+gyro_fft,CONFIG_MODULES_GYRO_FFT=y
+land_detector,CONFIG_MODULES_LAND_DETECTOR=y
+landing_target_estimator,CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+load_mon,CONFIG_MODULES_LOAD_MON=y
+local_position_estimator,CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
+logger,CONFIG_MODULES_LOGGER=y
+mavlink,CONFIG_MODULES_MAVLINK=y
+mc_att_control,CONFIG_MODULES_MC_ATT_CONTROL=y
+mc_hover_thrust_estimator,CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+mc_pos_control,CONFIG_MODULES_MC_POS_CONTROL=y
+mc_rate_control,CONFIG_MODULES_MC_RATE_CONTROL=y
+micrortps_bridge,CONFIG_MODULES_MICRORTPS_BRIDGE=y
+microdds_client,CONFIG_MODULES_MICRODDS_CLIENT=y
+navigator,CONFIG_MODULES_NAVIGATOR=y
+px4iofirmware,CONFIG_MODULES_PX4IOFIRMWARE=y
+rc_update,CONFIG_MODULES_RC_UPDATE=y
+replay,CONFIG_MODULES_REPLAY=y
+rover_pos_control,CONFIG_MODULES_ROVER_POS_CONTROL=y
+sensors,CONFIG_MODULES_SENSORS=y
+sih,CONFIG_MODULES_SIH=y
+simulator,CONFIG_MODULES_SIMULATOR=y
+temperature_compensation,CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+uuv_att_control,CONFIG_MODULES_UUV_ATT_CONTROL=y
+uuv_pos_control,CONFIG_MODULES_UUV_POS_CONTROL=y
+gimbal,CONFIG_MODULES_GIMBAL=y
+vtol_att_control,CONFIG_MODULES_VTOL_ATT_CONTROL=y
+bl_update,CONFIG_SYSTEMCMDS_BL_UPDATE=y
+dmesg,CONFIG_SYSTEMCMDS_DMESG=y
+dumpfile,CONFIG_SYSTEMCMDS_DUMPFILE=y
+dyn,CONFIG_SYSTEMCMDS_DYN=y
+failure,CONFIG_SYSTEMCMDS_FAILURE=y
+gpio,CONFIG_SYSTEMCMDS_GPIO=y
+hardfault_log,CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+i2cdetect,CONFIG_SYSTEMCMDS_I2CDETECT=y
+led_control,CONFIG_SYSTEMCMDS_LED_CONTROL=y
+mft,CONFIG_SYSTEMCMDS_MFT=y
+microbench,CONFIG_SYSTEMCMDS_MICROBENCH=y
+mixer,CONFIG_SYSTEMCMDS_MIXER=y
+motor_test,CONFIG_SYSTEMCMDS_MOTOR_TEST=y
+mtd,CONFIG_SYSTEMCMDS_MTD=y
+netman,CONFIG_SYSTEMCMDS_NETMAN=y
+nshterm,CONFIG_SYSTEMCMDS_NSHTERM=y
+param,CONFIG_SYSTEMCMDS_PARAM=y
+perf,CONFIG_SYSTEMCMDS_PERF=y
+pwm,CONFIG_SYSTEMCMDS_PWM=y
+reboot,CONFIG_SYSTEMCMDS_REBOOT=y
+reflect,CONFIG_SYSTEMCMDS_REFLECT=y
+sd_bench,CONFIG_SYSTEMCMDS_SD_BENCH=y
+serial_tet,CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+shutdown,CONFIG_SYSTEMCMDS_SHUTDOWN=y
+system_time,CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+tests,CONFIG_SYSTEMCMDS_TESTS=y
+top,CONFIG_SYSTEMCMDS_TOP=y
+topic_listener,CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+tune_control,CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+uorb,CONFIG_SYSTEMCMDS_UORB=y
+usb_connected,CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+ver,CONFIG_SYSTEMCMDS_VER=y
+work_queue,CONFIG_SYSTEMCMDS_WORK_QUEUE=y
+dyn_hello,CONFIG_EXAMPLES_DYN_HELLO=y
+fake_gps,CONFIG_EXAMPLES_FAKE_GPS=y
+fake_gyro,CONFIG_EXAMPLES_FAKE_GYRO=y
+fake_imu,CONFIG_EXAMPLES_FAKE_IMU=y
+fake_magnetometer,CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
+fixedwing_control,CONFIG_EXAMPLES_FIXEDWING_CONTROL=y
+hello,CONFIG_EXAMPLES_HELLO=y
+hwtest,CONFIG_EXAMPLES_HWTEST=y
+matlab_csv_serial,CONFIG_EXAMPLES_MATLAB_CSV_SERIAL=y
+px4_mavlink_debug,CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
+px4_simple_app,CONFIG_EXAMPLES_PX4_SIMPLE_APP=y
+rover_steering_control,CONFIG_EXAMPLES_ROVER_STEERING_CONTROL=y
+uuv_example_app,CONFIG_EXAMPLES_UUV_EXAMPLE_APP=y
+work_item,CONFIG_EXAMPLES_WORK_ITEM=y
+add_compile_options(-Wno-narrowing),CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
+-D__PX4_LINUX,CONFIG_BOARD_LINUX=y
@@ -16,7 +16,7 @@ class ModuleDocumentation(object):
    valid_categories = ['driver', 'estimator', 'controller', 'system',
                        'communication', 'command', 'template', 'simulation', 'autotune']
    valid_subcategories = ['', 'distance_sensor', 'imu', 'airspeed_sensor',
-                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor', 'transponder']
+                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor']

    max_line_length = 80 # wrap lines that are longer than this

@@ -200,12 +200,13 @@ if [[ $INSTALL_SIM == "true" ]]; then

 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		java_version=11
+		gazebo_version=9
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		java_version=13
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		java_version=11
+		gazebo_version=11
 	else
 		java_version=14
+		gazebo_version=11
 	fi
 	# Java (jmavsim or fastrtps)
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -219,30 +220,20 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")

 	# Gazebo
-	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		gazebo_version=9
-		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
-	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
-		gazebo_packages="gazebo libgazebo-dev"
-	else
-		# default and Ubuntu 20.04
-		gazebo_version=11
-		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
-	fi
-
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
 	sudo apt-get update -y --quiet
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		dmidecode \
-		$gazebo_packages \
+		gazebo$gazebo_version \
 		gstreamer1.0-plugins-bad \
 		gstreamer1.0-plugins-base \
 		gstreamer1.0-plugins-good \
 		gstreamer1.0-plugins-ugly \
 		gstreamer1.0-libav \
 		libeigen3-dev \
+		libgazebo$gazebo_version-dev \
 		libgstreamer-plugins-base1.0-dev \
 		libimage-exiftool-perl \
 		libopencv-dev \
@@ -74,9 +74,6 @@ if [ "$model" == "" ] || [ "$model" == "none" ]; then
 	if [ "$program" == "jsbsim" ]; then
 		echo "empty model, setting rascal as default for jsbsim"
 		model="rascal"
-	elif [ "$program" == "sihsim" ]; then
-		echo "empty model, setting quadx as default for sihsim"
-		model="quadx"
 	else
 		echo "empty model, setting iris as default"
 		model="iris"
@@ -217,12 +214,6 @@ elif [ "$program" == "jsbsim" ] && [ -z "$no_sim" ]; then
 	fi
 	"${build_path}/build_jsbsim_bridge/jsbsim_bridge" ${model} -s "${src_path}/Tools/jsbsim_bridge/scene/${world}.xml" 2> /dev/null &
 	JSBSIM_PID=$!
-elif [ "$program" == "sihsim" ] && [ ! -n "$no_sim" ]; then
-	export SIM_MODE="sihsim"
-	if [ "$model" != "airplane" ] && [ "$model" != "quadx" ] && [ "$model" != "xvert" ]; then
-		echo "Model ${model} not compatible with with sih. sih supports [quadx,airplane,xvert]."
-		exit 1
-	fi
 fi

 pushd "$rootfs" >/dev/null
@@ -2,7 +2,6 @@ CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_ROMFSROOT="cannode"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
-CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
@@ -11,16 +10,7 @@ CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_OPTICAL_FLOW_PAW3902=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_SENSORS=y
-# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
-# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
-# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
-# CONFIG_SENSORS_VEHICLE_MAGNETOMETER is not set
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -3,8 +3,6 @@
 # board sensors init
 #------------------------------------------------------------------------------

-param set-default IMU_GYRO_RATEMAX 1000
-
 # Internal SPI
 paw3902 -s start -Y 180

@@ -4,6 +4,7 @@ CONFIG_BOARD_ROMFSROOT="cannode"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_BOARD_EXTERNAL_METADATA=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
@@ -13,18 +14,5 @@ CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_SENSORS=y
-# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
-# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
-# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
 CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -4,7 +4,6 @@
 #------------------------------------------------------------------------------

 param set-default CBRK_IO_SAFETY 0
-param set-default MBE_ENABLE 1

 safety_button start
 tone_alarm start
@@ -4,6 +4,7 @@ CONFIG_BOARD_ROMFSROOT="cannode"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_BOARD_EXTERNAL_METADATA=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
@@ -13,18 +14,5 @@ CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
-CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
-CONFIG_MODULES_SENSORS=y
-# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
-# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
-# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
 CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_VER=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
@@ -5,7 +5,6 @@

 param set-default CBRK_IO_SAFETY 0
 param set-default CANNODE_GPS_RTCM 1
-param set-default MBE_ENABLE 1

 safety_button start
 tone_alarm start
@@ -1,89 +1,96 @@
 CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m7"
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS1"
-CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
-CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
-CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
-CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
+CONFIG_BOARD_ETHERNET=y
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS7"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS6"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
+CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_DRIVERS_BAROMETER_DPS310=y
-CONFIG_DRIVERS_CAMERA_CAPTURE=n
-CONFIG_DRIVERS_CAMERA_TRIGGER=n
+CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_BAROMETER_MS5611=y
+CONFIG_DRIVERS_BATT_SMBUS=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM42605=y
-CONFIG_COMMON_LIGHT=n
+CONFIG_DRIVERS_HEATER=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
+CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
-CONFIG_DRIVERS_OSD=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_POWER_MONITOR_INA228=y
+CONFIG_DRIVERS_POWER_MONITOR_INA238=y
 CONFIG_DRIVERS_PWM_OUT=y
-CONFIG_DRIVERS_PWM_OUT_SIM=n
+CONFIG_DRIVERS_PWM_OUT_SIM=y
+CONFIG_DRIVERS_PX4IO=y
 CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_RPM=n
+CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
-CONFIG_BOARD_UAVCAN_INTERFACES=1
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
-CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
 CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
 CONFIG_MODULES_MC_ATT_CONTROL=y
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
+CONFIG_MODULES_SIH=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_MODULES_GIMBAL=n
-CONFIG_SYSTEMCMDS_BL_UPDATE=n
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_DUMPFILE=n
-CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=n
-CONFIG_SYSTEMCMDS_MFT=n
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=n
-CONFIG_SYSTEMCMDS_MTD=n
+CONFIG_SYSTEMCMDS_MOTOR_TEST=y
+CONFIG_SYSTEMCMDS_MTD=y
+CONFIG_SYSTEMCMDS_NETMAN=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_PWM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_SD_BENCH=n
-CONFIG_SYSTEMCMDS_SD_STRESS=n
-CONFIG_SYSTEMCMDS_SERIAL_TEST=n
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-CONFIG_SYSTEMCMDS_TUNE_CONTROL=n
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
 CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-CONFIG_EXAMPLES_FAKE_GPS=n
@@ -1,10 +1,10 @@
 {
-    "board_id": 1013,
-    "magic": "PX4FWv1",
-    "description": "Firmware for the MatekH743 boards",
+    "board_id": 57,
+    "magic": "ARKFWv1",
+    "description": "Firmware for the ARKFMUv6X board",
    "image": "",
    "build_time": 0,
-    "summary": "MatekH743",
+    "summary": "ARKFMUv6X",
    "version": "0.1",
    "image_size": 0,
    "image_maxsize": 1966080,
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+# Mavlink ethernet (CFG 1000)
+param set-default MAV_2_CONFIG 1000
+param set-default MAV_2_BROADCAST 1
+param set-default MAV_2_MODE 0
+param set-default MAV_2_RADIO_CTL 0
+param set-default MAV_2_RATE 100000
+param set-default MAV_2_REMOTE_PRT 14550
+param set-default MAV_2_UDP_PRT 14550
+
+param set-default SENS_EN_INA238 0
+param set-default SENS_EN_INA228 0
+param set-default SENS_EN_INA226 1
+
+if ver hwtypecmp ARKV6X001000 ARKV6X001001 ARKV6X001002 ARKV6X001003 ARKV6X001004 ARKV6X001005 ARKV6X001006 ARKV6X001007
+then
+	param set-default SYS_USE_IO 0
+else
+	param set-default SYS_USE_IO 1
+fi
+
+safety_button start
@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# PX4 FMUv6X specific board sensors init
+#------------------------------------------------------------------------------
+board_adc start
+
+if param compare SENS_EN_INA226 1
+then
+	# Start Digital power monitors
+	ina226 -X -b 1 -t 1 -k start
+	ina226 -X -b 2 -t 2 -k start
+fi
+
+if param compare SENS_EN_INA228 1
+then
+	# Start Digital power monitors
+	ina228 -X -b 1 -t 1 -k start
+	ina228 -X -b 2 -t 2 -k start
+fi
+
+if param compare SENS_EN_INA238 1
+then
+	# Start Digital power monitors
+	ina238 -X -b 1 -t 1 -k start
+	ina238 -X -b 2 -t 2 -k start
+fi
+
+# Internal SPI bus IIM42652
+iim42652 -R 3 -s -b 1 start
+
+# Internal SPI bus ICM42688p
+icm42688p -R 9 -s -b 2 start
+
+# Internal SPI bus ICM42688p
+icm42688p -R 6 -s -b 3 start
+
+# Internal magnetometer on I2c
+bmm150 -I start
+
+# External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
+ist8310 -X -b 1 -R 10 start
+
+# Possible internal Baro
+bmp388 -I start
+
+# Baro on I2C3
+ms5611 -X start
@@ -11,11 +11,11 @@
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/matek/h743-mini/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/fmu-v6x/nuttx-config"
 CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
 CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
 CONFIG_ARCH_CHIP="stm32h7"
-CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H753II=y
 CONFIG_ARCH_CHIP_STM32H7=y
 CONFIG_ARCH_INTERRUPTSTACK=512
 CONFIG_ARMV7M_BASEPRI_WAR=y
@@ -25,16 +25,17 @@ CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
-CONFIG_BOARD_LOOPSPERMSEC=22114
+CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
-CONFIG_CDCACM_PRODUCTID=0x004b
-CONFIG_CDCACM_PRODUCTSTR="Matek H743-mini"
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0035
+CONFIG_CDCACM_PRODUCTSTR="ARK BL FMU v6X.x"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3162
-CONFIG_CDCACM_VENDORSTR="Matek"
+CONFIG_CDCACM_VENDORID=0x3185
+CONFIG_CDCACM_VENDORSTR="ARK"
 CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -71,19 +72,22 @@ CONFIG_START_MONTH=11
 CONFIG_STDIO_BUFFER_SIZE=32
 CONFIG_STM32H7_BKPSRAM=y
 CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
 CONFIG_STM32H7_OTGFS=y
 CONFIG_STM32H7_PROGMEM=y
 CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
 CONFIG_STM32H7_TIM1=y
-CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_UART7=y
 CONFIG_SYSTEMTICK_HOOK=y
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_TASK_NAME_SIZE=24
 CONFIG_TTY_SIGINT=y
 CONFIG_TTY_SIGINT_CHAR=0x03
 CONFIG_TTY_SIGTSTP=y
-CONFIG_USART1_RXBUFSIZE=600
-CONFIG_USART1_TXBUFSIZE=300
+CONFIG_UART7_RXBUFSIZE=512
+CONFIG_UART7_RXDMA=y
+CONFIG_UART7_TXBUFSIZE=512
+CONFIG_UART7_TXDMA=y
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
@@ -1,5 +1,5 @@
 /************************************************************************************
- * nuttx-configs/px4_fmu-v6u/include/board.h
+ * nuttx-configs/px4_fmu-v6x/include/board.h
 *
 *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
 *   Authors: David Sidrane <david.sidrane@nscdg.com>
@@ -32,8 +32,8 @@
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/
-#ifndef __NUTTX_CONFIG_MATEKH743SLIM_INCLUDE_BOARD_H
-#define __NUTTX_CONFIG_MATEKH743SLIM_INCLUDE_BOARD_H
+#ifndef __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H
+#define __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H

 /************************************************************************************
 * Included Files
@@ -55,17 +55,17 @@
 ************************************************************************************/

 /* Clocking *************************************************************************/
-/* The MatekH743-Slim  board provides the following clock sources:
+/* The px4_fmu-v6X  board provides the following clock sources:
 *
- *   X1: 8 MHz crystal for HSE
+ *   X1: 16 MHz crystal for HSE
 *
 * So we have these clock source available within the STM32
 *
- *   HSI: 64 MHz RC factory-trimmed
- *   HSE:  8 MHz crystal for HSE
+ *   HSI: 16 MHz RC factory-trimmed
+ *   HSE: 16 MHz crystal for HSE
 */

-#define STM32_BOARD_XTAL        8000000ul
+#define STM32_BOARD_XTAL        16000000ul

 #define STM32_HSI_FREQUENCY     16000000ul
 #define STM32_LSI_FREQUENCY     32000
@@ -74,7 +74,7 @@

 /* Main PLL Configuration.
 *
- * PLL source is HSE = 8,000,000
+ * PLL source is HSE = 16,000,000
 *
 * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
 * Subject to:
@@ -99,7 +99,7 @@

 /* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
 *
- *   PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
+ *   PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
 *
 *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
 *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
@@ -112,12 +112,12 @@
 				 RCC_PLLCFGR_DIVQ1EN | \
 				 RCC_PLLCFGR_DIVR1EN)
 #define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
-#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(120)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(60)
 #define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
 #define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
 #define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)

-#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 120)
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 60)
 #define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
 #define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
 #define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
@@ -129,13 +129,13 @@
 				  RCC_PLLCFGR_DIVP2EN | \
 				  RCC_PLLCFGR_DIVQ2EN | \
 				  RCC_PLLCFGR_DIVR2EN)
-#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(2)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
 #define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
 #define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
 #define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
 #define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)

-#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 48)
 #define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
 #define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
 #define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
@@ -145,13 +145,13 @@
 #define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
 				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
 				 RCC_PLLCFGR_DIVQ3EN)
-#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(2)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
 #define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
 #define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
 #define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
 #define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)

-#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 48)
 #define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
 #define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
 #define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
@@ -250,7 +250,7 @@

 #define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2

-/* FDCAN 1 clock source */
+/* FDCAN 1 2 clock source */

 #define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */

@@ -280,21 +280,21 @@

 /* SDMMC definitions ********************************************************/

-/* Init 480kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */

 #define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)

-/* 20 MHz Max for now - more reliable on some boards than 25 MHz
- * 20 MHz = PLL1Q/(2*div), div =  PLL1Q/(2*freq), div = 6 = 240 / 40
+/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
+ * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
 */

 #if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_MMCXFR_CLKDIV   (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #else
 #  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #endif
 #if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
-#  define STM32_SDMMC_SDXFR_CLKDIV    (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #else
 #  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
 #endif
@@ -302,8 +302,18 @@
 #define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE

 /* LED definitions ******************************************************************/
-/* The board has two, LED_GREEN a Green LED and LED_BLUE a Blue LED,
- * that can be controlled by software.
+/* The PX4 FMUV6X board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+/* LED definitions ******************************************************************/
+/* The px4_fmu-v6x board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
 *
 * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
 * The following definitions are used to access individual LEDs.
@@ -313,15 +323,18 @@

 #define BOARD_LED1        0
 #define BOARD_LED2        1
-#define BOARD_NLEDS       2
+#define BOARD_LED3        2
+#define BOARD_NLEDS       3

-#define BOARD_LED_BLUE    BOARD_LED1
+#define BOARD_LED_RED     BOARD_LED1
 #define BOARD_LED_GREEN   BOARD_LED2
+#define BOARD_LED_BLUE    BOARD_LED3

 /* LED bits for use with board_userled_all() */

 #define BOARD_LED1_BIT    (1 << BOARD_LED1)
 #define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)

 /* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
 * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
@@ -350,63 +363,78 @@

 /* Alternate function pin selections ************************************************/

-#define GPIO_USART1_RX   GPIO_USART1_RX_2   /* PA10 */
-#define GPIO_USART1_TX   GPIO_USART1_TX_2   /* PA9  */
+#define GPIO_USART1_RX   GPIO_USART1_RX_3      /* PB7 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_3      /* PB6 */

-#define GPIO_USART2_RX   GPIO_USART2_RX_2   /* PD6  */
-#define GPIO_USART2_TX   GPIO_USART2_TX_2   /* PD5  */
+#define GPIO_USART2_RX   GPIO_USART2_RX_1       /* PA3   */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2       /* PD5   */
+#define GPIO_USART2_RTS  GPIO_USART2_RTS_2      /* PD4   */
+#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2  /* PD3   */

-#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9  */
-#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8  */
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9   */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8   */

-#define GPIO_UART4_RX    GPIO_UART4_RX_3    /* PB8  */
-#define GPIO_UART4_TX    GPIO_UART4_TX_3    /* PB9  */
+#define GPIO_UART4_RX    GPIO_UART4_RX_6    /* PH14 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_6    /* PH13 */

-#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7  */
+#define GPIO_UART5_RX    GPIO_UART5_RX_3    /* PD2  */
+#define GPIO_UART5_TX    GPIO_UART5_TX_3    /* PC12 */
+// GPIO_UART5_RTS  No remap                 /* PC8  */
+// GPIO_UART5_CTS  No remap                 /* PC9  */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7 */
 #define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */

-#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7  */
+#define GPIO_UART7_RX    GPIO_UART7_RX_4    /* PF6  */
 #define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
-#define GPIO_UART7_RTS   GPIO_UART7_RTS_1   /* PE9  */
-#define GPIO_UART7_CTS   GPIO_UART7_CTS_1   /* PE10 */
+#define GPIO_UART7_RTS   (GPIO_UART7_RTS_2 | GPIO_PULLDOWN)   /* PF8  */
+#define GPIO_UART7_CTS   (GPIO_UART7_CTS_1 | GPIO_PULLDOWN)   /* PE10 */

-#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0  */
-#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1  */
+#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0 */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1 */


 /* CAN
 *
 * CAN1 is routed to transceiver.
+ * CAN2 is routed to transceiver.
 */
-
 #define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
 #define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1  */
+#define GPIO_CAN2_RX     GPIO_CAN2_RX_1     /* PB12 */
+#define GPIO_CAN2_TX     GPIO_CAN2_TX_1     /* PB13  */

 /* SPI
+ * SPI1 is sensors1
+ * SPI2 is sensors2
+ * SPI3 is sensors3
+ * SPI4 is Not Used
+ * SPI5 is FRAM
+ * SPI6 is EXTERNAL1
 *
- * SPI1 is MPU6000
- * SPI2 is MAX7456
- * SPI3 is extern with PD4 and PE2 as CS
- * SPI4 is ICM20602
 */

 #define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))

-#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
-#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_3               /* PD7  */
+#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_3               /* PG9  */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_2               /* PB5  */
 #define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5  */

-#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_1               /* PB14 */
-#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_1               /* PB15 */
-#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_4) /* PB13 */
+#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_3               /* PI2  */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_4               /* PI3  */
+#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_6) /* PI1  */

-#define GPIO_SPI3_MISO   GPIO_SPI3_MISO_1               /* PB4  */
-#define GPIO_SPI3_MOSI   GPIO_SPI3_MOSI_4               /* PB5  */
-#define GPIO_SPI3_SCK    ADJ_SLEW_RATE(GPIO_SPI3_SCK_1) /* PB3  */
+#define GPIO_SPI3_MISO   GPIO_SPI3_MISO_2               /* PC11 */
+#define GPIO_SPI3_MOSI   GPIO_SPI3_MOSI_3               /* PB2  */
+#define GPIO_SPI3_SCK    ADJ_SLEW_RATE(GPIO_SPI3_SCK_2) /* PC10 */

-#define GPIO_SPI4_MISO   GPIO_SPI4_MISO_1               /* PE13 */
-#define GPIO_SPI4_MOSI   GPIO_SPI4_MOSI_1               /* PE14 */
-#define GPIO_SPI4_SCK    ADJ_SLEW_RATE(GPIO_SPI4_SCK_1) /* PE12 */
+#define GPIO_SPI5_MISO   GPIO_SPI5_MISO_2               /* PH7  */
+#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_1               /* PF11 */
+#define GPIO_SPI5_SCK    ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7  */
+
+#define GPIO_SPI6_MISO   GPIO_SPI6_MISO_2               /* PA6  */
+#define GPIO_SPI6_MOSI   GPIO_SPI6_MOSI_1               /* PG14 */
+#define GPIO_SPI6_SCK    ADJ_SLEW_RATE(GPIO_SPI6_SCK_3) /* PB3  */

 /* I2C
 *
@@ -416,34 +444,71 @@
 *
 */

-#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1       /* PB6  */
-#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2       /* PB9  */

-#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
-#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)

-#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10 */
-#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11 */
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2       /* PF1 */
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2       /* PF0 */

-#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
-#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN1)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN0)

-/* SDMMC1
+#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1       /* PA8 */
+#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2       /* PH8 */
+
+#define GPIO_I2C3_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTA | GPIO_PIN8)
+#define GPIO_I2C3_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN8)
+
+#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2       /* PF14 */
+#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2       /* PF15 */
+
+#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN14)
+#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN15)
+
+/* SDMMC2
 *
- *      SDMMC1_D0                          PC8
- *      SDMMC1_D1                          PC9
- *      SDMMC1_D2                          PC10
- *      SDMMC1_D3                          PC11
- *      SDMMC1_CK                          PC12
- *      SDMMC1_CMD                         PD2
+ *      VDD 3.3
+ *      GND
+ *      SDMMC2_CK                           PD6
+ *      SDMMC2_CMD                          PD7
+ *      SDMMC2_D0                           PB14
+ *      SDMMC2_D1                           PB15
+ *      SDMMC2_D2                           PG11
+ *      SDMMC2_D3                           PB4
 */

-// #define GPIO_SDMMC1_D0   GPIO_SDMMC1_D0    /* PC8  */
-// #define GPIO_SDMMC1_D1   GPIO_SDMMC1_D1    /* PC9  */
-// #define GPIO_SDMMC1_D2   GPIO_SDMMC1_D2    /* PC10 */
-// #define GPIO_SDMMC1_D3   GPIO_SDMMC1_D3    /* PC11 */
-// #define GPIO_SDMMC1_CK   GPIO_SDMMC1_CK    /* PC12 */
-// #define GPIO_SDMMC1_CMD  GPIO_SDMMC1_CMD   /* PD2  */
+#define GPIO_SDMMC2_CK   GPIO_SDMMC2_CK_1  /* PD6 */
+#define GPIO_SDMMC2_CMD  GPIO_SDMMC2_CMD_1 /* PD7 */
+//      GPIO_SDMMC2_D0   No Remap          /* PB14 */
+//      GPIO_SDMMC2_D1   No Remap          /* PB15 */
+#define GPIO_SDMMC2_D2   GPIO_SDMMC2_D2_1  /* PG11 */
+//      GPIO_SDMMC2_D3    No Remap         /* PB4 */
+
+/* The STM32 H7 connects to a TI DP83848TSQ/NOPB
+ * using RMII
+ *
+ *   STM32 H7 BOARD        DP83848TSQ/NOPB
+ *   GPIO     SIGNAL       PIN NAME
+ *   -------- ------------ -------------
+ *   PA7     ETH_CRS_DV    CRS_DV
+ *   PC1     ETH_MDC       MDC
+ *   PA2     ETH_MDIO      MDIO
+ *   PA1     ETH_REF_CL    X1
+ *   PC4     ETH_RXD0      RX_D0
+ *   PC5     ETH_RXD1      RX_D1
+ *   PB11    ETH_TX_EN     TX_EN
+ *   PG13    ETH_TXD0      TX_D0
+ *   PG12    ETH_TXD1      TX_D1
+ *
+ * The PHY address is 1, since COL/PHYAD0 features a pull up.
+ */
+
+#define GPIO_ETH_RMII_TX_EN	GPIO_ETH_RMII_TX_EN_1 /* PB11 */
+#define GPIO_ETH_RMII_TXD0	GPIO_ETH_RMII_TXD0_2  /* PG13 */
+#define GPIO_ETH_RMII_TXD1	GPIO_ETH_RMII_TXD1_2  /* PG12 */


 /* USB
@@ -490,4 +555,4 @@
 # define PROBE_MARK(n)
 #endif

-#endif  /*__NUTTX_CONFIG_MATEKH743SLIM_INCLUDE_BOARD_H  */
+#endif  /*__NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H  */
@@ -0,0 +1,87 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     /* 1 DMA1:37 ICM-20649 */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     /* 2 DMA1:38 ICM-20649 */
+
+#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0     /* 3 DMA1:39 ICM-42688-P */
+#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0     /* 4 DMA1:40 ICM-42688-P */
+
+//#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
+//#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
+
+//#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_0 /*  DMA1:43 Telem3 */
+//#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0 /*  DMA1:44 Telem3 */
+
+//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
+//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
+
+//#define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 EXT2 */
+//#define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 EXT2 */
+
+#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   /* 5 DMA1:71 PX4IO */
+#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   /* 6 DMA1:72 PX4IO */
+
+// Assigned in timer_config.cpp
+
+// Timer 4                                          /* 7 DMA1:32 TIM4UP */
+// Timer 5                                          /* 8 DMA1:50 TIM5UP */
+
+// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 DMA2:61 BMI088 */
+#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 DMA2:62 BMI088 */
+
+#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
+#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
+
+#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
+#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66  TELEM2 */
+
+#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79  TELEM1 */
+#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80  TELEM1 */
+
+//#define DMAMAP_UART8_RX   DMAMAP_DMA12_UART8RX_1  /*  DMA1:81  GPS2 */
+//#define DMAMAP_UART8_TX   DMAMAP_DMA12_UART8TX_1  /*  DMA1:82  GPS2 */
+
+// DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
+#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */
@@ -24,12 +24,12 @@
 # CONFIG_NSH_DISABLE_TIME is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
-CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/px4/fmu-v5x/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/fmu-v6x/nuttx-config"
 CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
 CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
-CONFIG_ARCH_CHIP="stm32f7"
-CONFIG_ARCH_CHIP_STM32F765II=y
-CONFIG_ARCH_CHIP_STM32F7=y
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H753II=y
+CONFIG_ARCH_CHIP_STM32H7=y
 CONFIG_ARCH_INTERRUPTSTACK=512
 CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_BASEPRI_WAR=y
@@ -41,29 +41,29 @@ CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
-CONFIG_BOARD_LOOPSPERMSEC=22114
+CONFIG_BOARD_LOOPSPERMSEC=95751
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x0033
-CONFIG_CDCACM_PRODUCTSTR="PX4 FMU v5X.x"
+CONFIG_CDCACM_PRODUCTID=0x0035
+CONFIG_CDCACM_PRODUCTSTR="ARK FMU v6X.x"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3185
-CONFIG_CDCACM_VENDORSTR="Auterion"
+CONFIG_CDCACM_VENDORSTR="ARK"
 CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
-CONFIG_DEV_GPIO=y
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_ETH0_PHY_LAN8742A=y
+CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
 CONFIG_FAT_LCNAMES=y
 CONFIG_FAT_LFN=y
@@ -99,11 +99,13 @@ CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MMCSD=y
 CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_REGIONS=3
+CONFIG_MM_REGIONS=4
 CONFIG_MTD=y
 CONFIG_MTD_BYTE_WRITE=y
 CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
 CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
 CONFIG_NET=y
 CONFIG_NETDB_DNSCLIENT=y
 CONFIG_NETDB_DNSCLIENT_ENTRIES=8
@@ -113,7 +115,6 @@ CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
 CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
 CONFIG_NETINIT_DRIPADDR=0XC0A800FE
-CONFIG_NETINIT_MONITOR=y
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49
 CONFIG_NETUTILS_TELNETD=y
@@ -183,84 +184,78 @@ CONFIG_STACK_COLORATION=y
 CONFIG_START_DAY=30
 CONFIG_START_MONTH=11
 CONFIG_STDIO_BUFFER_SIZE=256
-CONFIG_STM32F7_ADC1=y
-CONFIG_STM32F7_ADC3=y
-CONFIG_STM32F7_BBSRAM=y
-CONFIG_STM32F7_BBSRAM_FILES=5
-CONFIG_STM32F7_BKPSRAM=y
-CONFIG_STM32F7_DMA1=y
-CONFIG_STM32F7_DMA2=y
-CONFIG_STM32F7_DMACAPABLE=y
-CONFIG_STM32F7_ETHMAC=y
-CONFIG_STM32F7_FLOWCONTROL_BROKEN=y
-CONFIG_STM32F7_I2C1=y
-CONFIG_STM32F7_I2C2=y
-CONFIG_STM32F7_I2C3=y
-CONFIG_STM32F7_I2C4=y
-CONFIG_STM32F7_I2C_DYNTIMEO=y
-CONFIG_STM32F7_I2C_DYNTIMEO_STARTSTOP=10
-CONFIG_STM32F7_OTGFS=y
-CONFIG_STM32F7_PHYADDR=0
-CONFIG_STM32F7_PHYSR=31
-CONFIG_STM32F7_PHYSR_100MBPS=0x8
-CONFIG_STM32F7_PHYSR_FULLDUPLEX=0x10
-CONFIG_STM32F7_PHYSR_MODE=0x10
-CONFIG_STM32F7_PHYSR_SPEED=0x8
-CONFIG_STM32F7_PHY_POLLING=y
-CONFIG_STM32F7_PROGMEM=y
-CONFIG_STM32F7_PWR=y
-CONFIG_STM32F7_RTC=y
-CONFIG_STM32F7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
-CONFIG_STM32F7_RTC_MAGIC_REG=1
-CONFIG_STM32F7_SAVE_CRASHDUMP=y
-CONFIG_STM32F7_SDMMC2=y
-CONFIG_STM32F7_SDMMC_DMA=y
-CONFIG_STM32F7_SERIALBRK_BSDCOMPAT=y
-CONFIG_STM32F7_SERIAL_DISABLE_REORDERING=y
-CONFIG_STM32F7_SPI1=y
-CONFIG_STM32F7_SPI1_DMA=y
-CONFIG_STM32F7_SPI1_DMA_BUFFER=1024
-CONFIG_STM32F7_SPI2=y
-CONFIG_STM32F7_SPI2_DMA=y
-CONFIG_STM32F7_SPI2_DMA_BUFFER=4096
-CONFIG_STM32F7_SPI3=y
-CONFIG_STM32F7_SPI3_DMA=y
-CONFIG_STM32F7_SPI3_DMA_BUFFER=1024
-CONFIG_STM32F7_SPI5=y
-CONFIG_STM32F7_SPI6=y
-CONFIG_STM32F7_SPI_DMA=y
-CONFIG_STM32F7_SPI_DMATHRESHOLD=8
-CONFIG_STM32F7_TIM10=y
-CONFIG_STM32F7_TIM11=y
-CONFIG_STM32F7_TIM3=y
-CONFIG_STM32F7_TIM9=y
-CONFIG_STM32F7_UART4=y
-CONFIG_STM32F7_UART5=y
-CONFIG_STM32F7_UART7=y
-CONFIG_STM32F7_UART8=y
-CONFIG_STM32F7_USART1=y
-CONFIG_STM32F7_USART2=y
-CONFIG_STM32F7_USART3=y
-CONFIG_STM32F7_USART6=y
-CONFIG_STM32F7_USART_BREAKS=y
-CONFIG_STM32F7_USART_INVERT=y
-CONFIG_STM32F7_USART_SINGLEWIRE=y
-CONFIG_STM32F7_USART_SWAP=y
-CONFIG_STM32F7_WWDG=y
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_ETHMAC=y
+CONFIG_STM32H7_FLASH_OVERRIDE_I=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C3=y
+CONFIG_STM32H7_I2C4=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PHYSR=31
+CONFIG_STM32H7_PHYSR_100MBPS=0x8
+CONFIG_STM32H7_PHYSR_FULLDUPLEX=0x10
+CONFIG_STM32H7_PHYSR_MODE=0x10
+CONFIG_STM32H7_PHYSR_SPEED=0x8
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC2=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI1_DMA=y
+CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI2_DMA=y
+CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
+CONFIG_STM32H7_SPI3=y
+CONFIG_STM32H7_SPI3_DMA=y
+CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI5=y
+CONFIG_STM32H7_SPI6=y
+CONFIG_STM32H7_SPI6_DMA=y
+CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI_DMA=y
+CONFIG_STM32H7_TIM12=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM5=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART5=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_DHCPC_RENEW=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_SYSTEM_PING=y
 CONFIG_TASK_NAME_SIZE=24
-CONFIG_TESTING_OSTEST=y
-CONFIG_TESTING_OSTEST_FPUTESTDISABLE=y
-CONFIG_TESTING_OSTEST_STACKSIZE=10240
 CONFIG_UART4_BAUD=57600
 CONFIG_UART4_RXBUFSIZE=600
 CONFIG_UART4_TXBUFSIZE=1500
 CONFIG_UART5_IFLOWCONTROL=y
 CONFIG_UART5_OFLOWCONTROL=y
-CONFIG_UART5_RXBUFSIZE=600
 CONFIG_UART5_RXDMA=y
 CONFIG_UART5_TXBUFSIZE=3000
 CONFIG_UART5_TXDMA=y
@@ -270,6 +265,7 @@ CONFIG_UART7_OFLOWCONTROL=y
 CONFIG_UART7_RXBUFSIZE=600
 CONFIG_UART7_RXDMA=y
 CONFIG_UART7_TXBUFSIZE=3000
+CONFIG_UART7_TXDMA=y
 CONFIG_UART8_BAUD=57600
 CONFIG_UART8_RXBUFSIZE=600
 CONFIG_UART8_TXBUFSIZE=1500
@@ -283,11 +279,12 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_TXBUFSIZE=3000
 CONFIG_USART3_BAUD=57600
 CONFIG_USART3_RXBUFSIZE=180
+CONFIG_USART3_RXDMA=y
 CONFIG_USART3_SERIAL_CONSOLE=y
 CONFIG_USART3_TXBUFSIZE=1500
+CONFIG_USART3_TXDMA=y
 CONFIG_USART6_BAUD=57600
 CONFIG_USART6_RXBUFSIZE=600
-CONFIG_USART6_RXDMA=y
 CONFIG_USART6_TXBUFSIZE=1500
 CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
@@ -295,3 +292,4 @@ CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
 CONFIG_USERMAIN_STACKSIZE=2944
 CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y
@@ -34,7 +34,7 @@
 *
 ****************************************************************************/

-/* The Durandal-v1 uses an STM32H743II has 2048Kb of main FLASH memory.
+/* The PX4 FMUV6X uses an STM32H753II has 2048Kb of main FLASH memory.
 * The flash memory is partitioned into a User Flash memory and a System
 * Flash memory. Each of these memories has two banks:
 *
@@ -59,11 +59,11 @@
 *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
 *      ST programmed value: System bootloader at 0x1FF0:0000
 *
- * The Durandal has a Swtich on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
- * drepresed, then the boot will be from 0x1FF0:0000
+ * The PX4 FMUV6X has a test point on board, the BOOT0 pin is at ground so by
+ * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
+ * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
 *
- * The STM32H743ZI also has 1024Kb of data SRAM.
+ * The STM32H743II also has 1024Kb of data SRAM.
 * SRAM is split up into several blocks and into three power domains:
 *
 *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
@@ -105,12 +105,14 @@
 * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
 * where the code expects to begin execution by jumping to the entry point in
 * the 0x0800:0000 address range.
+ *
+ * The bootloader uses the first sector of the flash, which is 128K in length.
 */

 MEMORY
 {
 	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	flash (rx)  : ORIGIN = 0x08000000, LENGTH = 2048K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH =  128K
 	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
 	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
@@ -34,7 +34,7 @@
 *
 ****************************************************************************/

-/* The board uses an STM32H743II and has 2048Kb of main FLASH memory.
+/* The PX4 FMUV6X uses an STM32H753II has 2048Kb of main FLASH memory.
 * The flash memory is partitioned into a User Flash memory and a System
 * Flash memory. Each of these memories has two banks:
 *
@@ -59,11 +59,11 @@
 *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
 *      ST programmed value: System bootloader at 0x1FF0:0000
 *
- * There's a switch on board, the BOOT0 pin is at ground so by default,
- * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
- * drepresed, then the boot will be from 0x1FF0:0000
+ * The PX4 FMUV6X has a test point on board, the BOOT0 pin is at ground so by
+ * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
+ * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
 *
- * The STM32H743ZI also has 1024Kb of data SRAM.
+ * The STM32H743II also has 1024Kb of data SRAM.
 * SRAM is split up into several blocks and into three power domains:
 *
 *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
@@ -132,6 +132,7 @@ ENTRY(_stext)
 */
 EXTERN(abort)
 EXTERN(_bootdelay_signature)
+EXTERN(board_get_manifest)

 SECTIONS
 {
@@ -1,6 +1,6 @@
 ############################################################################
 #
-#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2016 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -37,17 +37,20 @@ if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
 	)
 	target_link_libraries(drivers_board
 		PRIVATE
-			nuttx_arch
-			nuttx_drivers
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
 			bootloader
 	)
 	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)

 else()
 	add_library(drivers_board
+		can.c
 		i2c.cpp
 		init.c
 		led.c
+		mtd.cpp
+		manifest.c
 		sdio.c
 		spi.cpp
 		timer_config.cpp
@@ -59,9 +62,9 @@ else()
 		PRIVATE
 			arch_spi
 			arch_board_hw_info
-			drivers__led
-			nuttx_arch
-			nuttx_drivers
+			drivers__led # drv_led_start
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
 			px4_layer
 	)
 endif()
@@ -0,0 +1,524 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2016, 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * PX4FMU-v6x internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+
+#include <stm32_gpio.h>
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+
+#undef TRACE_PINS
+
+/* PX4IO connection configuration */
+
+#define BOARD_USES_PX4IO_VERSION       2
+#define PX4IO_SERIAL_DEVICE            "/dev/ttyS5"
+#define PX4IO_SERIAL_TX_GPIO           GPIO_USART6_TX
+#define PX4IO_SERIAL_RX_GPIO           GPIO_USART6_RX
+#define PX4IO_SERIAL_BASE              STM32_USART6_BASE
+#define PX4IO_SERIAL_VECTOR            STM32_IRQ_USART6
+#define PX4IO_SERIAL_TX_DMAMAP         DMAMAP_USART6_TX
+#define PX4IO_SERIAL_RX_DMAMAP         DMAMAP_USART6_RX
+#define PX4IO_SERIAL_RCC_REG           STM32_RCC_APB2ENR
+#define PX4IO_SERIAL_RCC_EN            RCC_APB2ENR_USART6EN
+#define PX4IO_SERIAL_CLOCK             STM32_PCLK2_FREQUENCY
+#define PX4IO_SERIAL_BITRATE           1500000               /* 1.5Mbps -> max rate for IO */
+
+/* Configuration ************************************************************************************/
+
+#define BOARD_HAS_LTC44XX_VALIDS      2 //  N Bricks
+#define BOARD_HAS_USB_VALID           1 // LTC Has USB valid
+#define BOARD_HAS_NBAT_V              2d // 2 Digital Voltage
+#define BOARD_HAS_NBAT_I              2d // 2 Digital Current
+
+/* PX4FMU GPIOs ***********************************************************************************/
+
+/* Trace Clock and D0-D3 are available on the trace connector
+ *
+ * TRACECLK PE2  - Dedicated       - Trace Connector Pin 1
+ * TRACED0  PE3  - nLED_RED        - Trace Connector Pin 3
+ * TRACED1  PE4  - nLED_GREEN      - Trace Connector Pin 5
+ * TRACED2  PE5  - nLED_BLUE       - Trace Connector Pin 7
+ * TRACED3  PE6  - nARMED          - Trace Connector Pin 8
+
+ */
+
+/* LEDs are driven with push open drain to support Anode to 5V or 3.3V or used as TRACE0-2 */
+
+#if !defined(TRACE_PINS)
+#  define GPIO_nLED_RED        /* PE3 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
+#  define GPIO_nLED_GREEN      /* PE4 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
+#  define GPIO_nLED_BLUE       /* PE5 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
+
+#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
+#  define BOARD_OVERLOAD_LED     LED_RED
+#  define BOARD_ARMED_STATE_LED  LED_BLUE
+
+#else
+
+#  define GPIO_TRACECLK1 (GPIO_TRACECLK |GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN2)
+#  define GPIO_TRACED0   (GPIO_TRACED0_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN3)
+#  define GPIO_TRACED1   (GPIO_TRACED1_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN4)
+#  define GPIO_TRACED2   (GPIO_TRACED2_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN5)
+#  define GPIO_TRACED3   (GPIO_TRACED3_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN6)
+//#define GPIO_TRACESWO                        //(GPIO_ALT|GPIO_AF0|GPIO_PORTB|GPIO_PIN3)
+
+#  undef  BOARD_HAS_CONTROL_STATUS_LEDS
+#  undef  BOARD_OVERLOAD_LED
+#  undef  BOARD_ARMED_STATE_LED
+
+#  define GPIO_nLED_RED    GPIO_TRACED0
+#  define GPIO_nLED_GREEN  GPIO_TRACED1
+#  define GPIO_nLED_BLUE   GPIO_TRACED2
+#  define GPIO_nARMED      GPIO_TRACED3
+#  define GPIO_nARMED_INIT GPIO_TRACED3
+#endif
+
+
+/* SPI */
+
+#define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
+#define GPIO_SYNC                   /* PE9  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_100MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
+
+/* I2C busses */
+
+/* Devices on the onboard buses.
+ *
+ * Note that these are unshifted addresses.
+ */
+#define GPIO_I2C2_DRDY1_BMP388      /* PG5  */  (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN5)
+
+/*
+ * ADC channels
+ *
+ * These are the channel numbers of the ADCs of the microcontroller that
+ * can be used by the Px4 Firmware in the adc driver
+ */
+
+/* ADC defines to be used in sensors.cpp to read from a particular channel */
+
+#define ADC1_CH(n)                  (n)
+
+/* N.B. there is no offset mapping needed for ADC3 because */
+#define ADC3_CH(n)                  (n)
+
+/* We are only use ADC3 for REV/VER.
+ * ADC3_6V6 and ADC3_3V3 are mapped back to ADC1
+ * To do this We are relying on PC2_C, PC3_C being connected to PC2, PC3
+ * respectively by the SYSCFG_PMCR default of setting for PC3SO PC2SO PA1SO
+ * PA0SO of 0.
+ *
+ *  0 Analog switch closed (pads are connected through the analog switch)
+ *
+ * So ADC3_INP0 is GPIO_ADC123_INP12
+ *    ADC3_INP1 is GPIO_ADC12_INP13
+ */
+
+/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
+
+#define PX4_ADC_GPIO  \
+	/* PA0  */  GPIO_ADC1_INP16,   \
+	/* PA4  */  GPIO_ADC12_INP18,  \
+	/* PB0  */  GPIO_ADC12_INP9,   \
+	/* PB1  */  GPIO_ADC12_INP5,   \
+	/* PC2  */  GPIO_ADC123_INP12, \
+	/* PC3  */  GPIO_ADC12_INP13,  \
+	/* PF12 */  GPIO_ADC1_INP6,    \
+	/* PH3  */  GPIO_ADC3_INP14,   \
+	/* PH4  */  GPIO_ADC3_INP15
+
+/* Define Channel numbers must match above GPIO pin IN(n)*/
+#define ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL     /* PA0  */  ADC1_CH(16)
+#define ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL     /* PA4  */  ADC1_CH(18)
+#define ADC_SCALED_VDD_3V3_SENSORS3_CHANNEL     /* PB0  */  ADC1_CH(9)
+#define ADC_SCALED_V5_CHANNEL                   /* PB1  */  ADC1_CH(5)
+#define ADC_ADC3_6V6_CHANNEL                    /* PC2  */  ADC3_CH(12)
+#define ADC_ADC3_3V3_CHANNEL                    /* PC3  */  ADC3_CH(13)
+#define ADC_SCALED_VDD_3V3_SENSORS4_CHANNEL     /* PF12 */  ADC1_CH(6)
+#define ADC_HW_VER_SENSE_CHANNEL                /* PH3  */  ADC3_CH(14)
+#define ADC_HW_REV_SENSE_CHANNEL                /* PH4  */  ADC3_CH(15)
+
+#define ADC_CHANNELS \
+	((1 << ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL) | \
+	 (1 << ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL) | \
+	 (1 << ADC_SCALED_VDD_3V3_SENSORS3_CHANNEL) | \
+	 (1 << ADC_SCALED_V5_CHANNEL)               | \
+	 (1 << ADC_ADC3_6V6_CHANNEL)                | \
+	 (1 << ADC_ADC3_3V3_CHANNEL))               | \
+	(1 << ADC_SCALED_VDD_3V3_SENSORS4_CHANNEL)
+
+/* HW has to large of R termination on ADC todo:change when HW value is chosen */
+
+#define HW_REV_VER_ADC_BASE STM32_ADC3_BASE
+
+#define SYSTEM_ADC_BASE STM32_ADC1_BASE
+
+/* HW has to large of R termination on ADC todo:change when HW value is chosen */
+#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
+
+/* HW Version and Revision drive signals Default to 1 to detect */
+#define BOARD_HAS_HW_VERSIONING
+
+#define GPIO_HW_VER_REV_DRIVE  /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
+#define GPIO_HW_REV_SENSE      /* PH4 */  GPIO_ADC3_INP15
+#define GPIO_HW_VER_SENSE      /* PH3 */  GPIO_ADC3_INP14
+#define HW_INFO_INIT           {'V','6','X','x', 'x',0}
+#define HW_INFO_INIT_VER       3 /* Offset in above string of the VER */
+#define HW_INFO_INIT_REV       4 /* Offset in above string of the REV */
+
+#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0 and Rev 3 Sensor sets
+//                 Base/FMUM
+#define V6X00   HW_VER_REV(0x0,0x0) // FMUV6X,                 Rev 0
+#define V6X01   HW_VER_REV(0x0,0x1) // FMUV6X,     BMI388 I2C2 Rev 1
+#define V6X03   HW_VER_REV(0x0,0x3) // FMUV6X,     Sensor Set  Rev 3
+#define V6X04   HW_VER_REV(0x0,0x4) // FMUV6X,     Sensor Set  Rev 4
+#define V6X10   HW_VER_REV(0x1,0x0) // NO PX4IO,               Rev 0
+#define V6X13   HW_VER_REV(0x1,0x3) // NO PX4IO,   Sensor Set  Rev 3
+#define V6X14   HW_VER_REV(0x1,0x4) // NO PX4IO,   Sensor Set  Rev 4
+#define V6X40   HW_VER_REV(0x4,0x0) // FMUV6X,                    HB CM4 base Rev 0
+#define V6X41   HW_VER_REV(0x4,0x1) // FMUV6X,     BMI388 I2C2    HB CM4 base Rev 1
+#define V6X43   HW_VER_REV(0x4,0x3) // FMUV6X,     Sensor Set     HB CM4 base Rev 3
+#define V6X44   HW_VER_REV(0x4,0x4) // FMUV6X,     Sensor Set     HB CM4 base Rev 4
+#define V6X50   HW_VER_REV(0x5,0x0) // FMUV6X,                    HB Mini Rev 0
+#define V6X51   HW_VER_REV(0x5,0x1) // FMUV6X,     BMI388 I2C2    HB Mini Rev 1
+#define V6X53   HW_VER_REV(0x5,0x3) // FMUV6X,     Sensor Set     HB Mini Rev 3
+#define V6X54   HW_VER_REV(0x5,0x4) // FMUV6X,     Sensor Set     HB Mini Rev 4
+
+
+/* HEATER
+ * PWM in future
+ */
+#define GPIO_HEATER_OUTPUT   /* PB10  T2CH3 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define HEATER_OUTPUT_EN(on_true)	       px4_arch_gpiowrite(GPIO_HEATER_OUTPUT, (on_true))
+
+/* PE6 is nARMED
+ *  The GPIO will be set as input while not armed HW will have external HW Pull UP.
+ *  While armed it shall be configured at a GPIO OUT set LOW
+ */
+#if !defined(TRACE_PINS)
+#define GPIO_nARMED_INIT     /* PE6 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN6)
+#define GPIO_nARMED          /* PE6 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN6)
+#define BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE(enabled)  px4_arch_configgpio((enabled) ? GPIO_nARMED : GPIO_nARMED_INIT)
+#define BOARD_GET_EXTERNAL_LOCKOUT_STATE() px4_arch_gpioread(GPIO_nARMED)
+#endif
+
+
+/* PWM
+ */
+#define DIRECT_PWM_OUTPUT_CHANNELS   9
+
+
+/* Power supply control and monitoring GPIOs */
+
+#define GPIO_nPOWER_IN_A                /* PG1  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN1)
+#define GPIO_nPOWER_IN_B                /* PG2  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN2)
+#define GPIO_nPOWER_IN_C                /* PG3  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN3)
+
+#define GPIO_nVDD_BRICK1_VALID          GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
+#define GPIO_nVDD_BRICK2_VALID          GPIO_nPOWER_IN_B /* Brick 2 Is Chosen  */
+#define BOARD_NUMBER_BRICKS             2
+#define BOARD_NUMBER_DIGITAL_BRICKS     2
+#define GPIO_nVDD_USB_VALID             GPIO_nPOWER_IN_C /* USB     Is Chosen */
+
+#define GPIO_VDD_5V_PERIPH_nEN          /* PG4  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN4)
+#define GPIO_VDD_5V_PERIPH_nOC          /* PE15 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTE|GPIO_PIN15)
+#define GPIO_VDD_5V_HIPOWER_nEN         /* PG10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN10)
+#define GPIO_VDD_5V_HIPOWER_nOC         /* PF13 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTF|GPIO_PIN13)
+#define GPIO_VDD_3V3_SENSORS4_EN        /* PG8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN8)
+#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN  /* PH2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN2)
+#define GPIO_VDD_3V3_SD_CARD_EN         /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
+
+/* Spare GPIO */
+
+#define GPIO_PG6                        /* PG6  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN6)
+#define GPIO_PD15                       /* PD15 */  (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTD|GPIO_PIN15)
+
+/* ETHERNET GPIO */
+
+#define GPIO_ETH_POWER_EN              /* PG15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN15)
+
+/* NFC GPIO */
+
+#define GPIO_NFC_GPIO                   /* PC0 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN0)
+
+
+/* Define True logic Power Control in arch agnostic form */
+
+#define VDD_5V_PERIPH_EN(on_true)          px4_arch_gpiowrite(GPIO_VDD_5V_PERIPH_nEN, !(on_true))
+#define VDD_5V_HIPOWER_EN(on_true)         px4_arch_gpiowrite(GPIO_VDD_5V_HIPOWER_nEN, !(on_true))
+#define VDD_3V3_SENSORS4_EN(on_true)       px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS4_EN, (on_true))
+#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (on_true))
+#define READ_VDD_3V3_SPEKTRUM_POWER_EN()   px4_arch_gpioread(GPIO_VDD_3V3_SPEKTRUM_POWER_EN)
+#define VDD_3V3_SD_CARD_EN(on_true)        px4_arch_gpiowrite(GPIO_VDD_3V3_SD_CARD_EN, (on_true))
+#define VDD_3V3_ETH_POWER_EN(on_true)      px4_arch_gpiowrite(GPIO_ETH_POWER_EN, (on_true))
+
+
+/* Tone alarm output */
+
+#define TONE_ALARM_TIMER        14  /* Timer 14 */
+#define TONE_ALARM_CHANNEL      1  /* PF9 GPIO_TIM14_CH1OUT_2 */
+
+#define GPIO_BUZZER_1           /* PF9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN9)
+
+#define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
+#define GPIO_TONE_ALARM         GPIO_TIM14_CH1OUT_2
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing
+ */
+#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
+
+/* High-resolution timer */
+#define HRT_TIMER               8  /* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
+
+#define HRT_PPM_CHANNEL         /* T8C1 */  1  /* use capture/compare channel 1 */
+#define GPIO_PPM_IN             /* PI5 T8C1 */ GPIO_TIM8_CH1IN_2
+
+/* RC Serial port */
+
+#define RC_SERIAL_PORT                     "/dev/ttyS5"
+
+/* Input Capture Channels. */
+#define INPUT_CAP1_TIMER                  1
+#define INPUT_CAP1_CHANNEL     /* T1C2 */ 2
+#define GPIO_INPUT_CAP1        /*  PE11 */ GPIO_TIM1_CH2IN
+
+/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
+#define PWMIN_TIMER                       4
+#define PWMIN_TIMER_CHANNEL    /* T4C2 */ 2
+#define GPIO_PWM_IN            /* PD13 */ GPIO_TIM4_CH2IN_2
+
+/* Safety Switch is HW version dependent on having an PX4IO
+ * So we init to a benign state with the _INIT definition
+ * and provide the the non _INIT one for the driver to make a run time
+ * decision to use it.
+ */
+#define GPIO_nSAFETY_SWITCH_LED_OUT_INIT   /* PD10 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTD|GPIO_PIN10)
+#define GPIO_nSAFETY_SWITCH_LED_OUT        /* PD10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)
+
+/* Enable the FMU to control it if there is no px4io fixme:This should be BOARD_SAFETY_LED(__ontrue) */
+#define GPIO_LED_SAFETY GPIO_nSAFETY_SWITCH_LED_OUT
+
+#define GPIO_SAFETY_SWITCH_IN              /* PF5 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTF|GPIO_PIN5)
+/* Enable the FMU to use the switch it if there is no px4io fixme:This should be BOARD_SAFTY_BUTTON() */
+#define GPIO_BTN_SAFETY GPIO_SAFETY_SWITCH_IN /* Enable the FMU to control it if there is no px4io */
+
+/* Power switch controls ******************************************************/
+
+#define SPEKTRUM_POWER(_on_true)           VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
+
+/*
+ * FMUv6X has a separate RC_IN
+ *
+ * GPIO PPM_IN on PI5 T8CH1
+ * SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7
+ *   Inversion is possible in the UART and can drive  GPIO PPM_IN as an output
+ */
+
+#define GPIO_PPM_IN_AS_OUT             (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTI|GPIO_PIN5)
+#define SPEKTRUM_RX_AS_GPIO_OUTPUT()   px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
+#define SPEKTRUM_RX_AS_UART()          /* Can be left as uart */
+#define SPEKTRUM_OUT(_one_true)        px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
+
+#define SDIO_SLOTNO                    0  /* Only one slot */
+#define SDIO_MINOR                     0
+
+/* SD card bringup does not work if performed on the IDLE thread because it
+ * will cause waiting.  Use either:
+ *
+ *  CONFIG_LIB_BOARDCTL=y, OR
+ *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
+ */
+
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
+   !defined(CONFIG_BOARD_INITTHREAD)
+#  warning SDIO initialization cannot be perfomed on the IDLE thread
+#endif
+
+/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
+ * this board support the ADC system_power interface, and therefore
+ * provides the true logic GPIO BOARD_ADC_xxxx macros.
+ */
+#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
+#define BOARD_ADC_USB_VALID     (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
+
+/* FMUv6X never powers off the Servo rail */
+
+#define BOARD_ADC_SERVO_VALID     (1)
+
+#if !defined(BOARD_HAS_LTC44XX_VALIDS) || BOARD_HAS_LTC44XX_VALIDS == 0
+#  define BOARD_ADC_BRICK1_VALID  (1)
+#  define BOARD_ADC_BRICK2_VALID  (0)
+#elif BOARD_HAS_LTC44XX_VALIDS == 1
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (0)
+#elif BOARD_HAS_LTC44XX_VALIDS == 2
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#elif BOARD_HAS_LTC44XX_VALIDS == 3
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
+#elif BOARD_HAS_LTC44XX_VALIDS == 4
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
+#  define BOARD_ADC_BRICK4_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK4_VALID))
+#else
+#  error Unsupported BOARD_HAS_LTC44XX_VALIDS value
+#endif
+
+#define BOARD_ADC_PERIPH_5V_OC  (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_nOC))
+#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_nOC))
+
+
+/* This board provides a DMA pool and APIs */
+#define BOARD_DMA_ALLOC_POOL_SIZE 5120
+
+/* This board provides the board_on_reset interface */
+
+#define BOARD_HAS_ON_RESET 1
+
+#if defined(TRACE_PINS)
+#define GPIO_TRACE                          \
+	GPIO_TRACECLK1,                           \
+	GPIO_TRACED0,                             \
+	GPIO_TRACED1,                             \
+	GPIO_TRACED2,                             \
+	GPIO_TRACED3
+#else
+#define GPIO_TRACE (GPIO_OUTPUT|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
+#endif
+
+#define PX4_GPIO_INIT_LIST { \
+		GPIO_TRACE,                       \
+		PX4_ADC_GPIO,                     \
+		GPIO_HW_VER_REV_DRIVE,            \
+		GPIO_CAN1_TX,                     \
+		GPIO_CAN1_RX,                     \
+		GPIO_CAN2_TX,                     \
+		GPIO_CAN2_RX,                     \
+		GPIO_HEATER_OUTPUT,               \
+		GPIO_nPOWER_IN_A,                 \
+		GPIO_nPOWER_IN_B,                 \
+		GPIO_nPOWER_IN_C,                 \
+		GPIO_VDD_5V_PERIPH_nEN,           \
+		GPIO_VDD_5V_PERIPH_nOC,           \
+		GPIO_VDD_5V_HIPOWER_nEN,          \
+		GPIO_VDD_5V_HIPOWER_nOC,          \
+		GPIO_VDD_3V3_SENSORS4_EN,         \
+		GPIO_VDD_3V3_SPEKTRUM_POWER_EN,   \
+		GPIO_VDD_3V3_SD_CARD_EN,          \
+		GPIO_PD15,                        \
+		GPIO_SYNC,                        \
+		SPI6_nRESET_EXTERNAL1,            \
+		GPIO_ETH_POWER_EN,                \
+		GPIO_NFC_GPIO,                    \
+		GPIO_TONE_ALARM_IDLE,             \
+		GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
+		GPIO_SAFETY_SWITCH_IN,            \
+		GPIO_PG6,                         \
+		GPIO_nARMED_INIT                  \
+	}
+
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
+#define PX4_I2C_BUS_MTD      4,5
+
+
+#define BOARD_NUM_IO_TIMERS 5
+
+__BEGIN_DECLS
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void);
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+extern void board_peripheral_reset(int ms);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS
@@ -1,6 +1,6 @@
 /****************************************************************************
 *
- *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *   Copyright (c) 2019, 2021 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -46,6 +46,7 @@
 #include <stm32_uart.h>
 #include <arch/board/board.h>
 #include "arm_internal.h"
+#include <px4_platform/gpio.h>
 #include <px4_platform_common/init.h>

 extern int sercon_main(int c, char **argv);
@@ -54,6 +55,15 @@ __EXPORT void board_on_reset(int status) {}

 __EXPORT void stm32_boardinitialize(void)
 {
+	/* configure pins */
+	const uint32_t list[] = PX4_GPIO_INIT_LIST;
+
+	for (size_t gpio = 0; gpio < arraySize(list); gpio++) {
+		if (list[gpio] != 0) {
+			px4_arch_configgpio(list[gpio]);
+		}
+	}
+
 	/* configure USB interfaces */
 	stm32_usbinitialize();
 }
@@ -1,6 +1,6 @@
 /****************************************************************************
 *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
@@ -32,47 +32,97 @@
 ****************************************************************************/

 /**
- * @file usb.c
+ * @file px4fmu_can.c
 *
- * Board-specific USB functions.
+ * Board-specific CAN functions.
 */

-#include "board_config.h"
-#include <nuttx/usb/usbdev.h>
-#include <nuttx/usb/usbdev_trace.h>
-#include <stm32_otg.h>
+#ifdef CONFIG_CAN
+
+#include <errno.h>
 #include <debug.h>

+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_arch.h"
+
+#include "chip.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+#ifdef CONFIG_CAN
+
 /************************************************************************************
- * Name: stm32_usbinitialize
- *
- * Description:
- *   Called to setup USB-related GPIO pins for the board.
- *
+ * Pre-processor Definitions
 ************************************************************************************/
+/* Configuration ********************************************************************/

-__EXPORT void stm32_usbinitialize(void)
-{
-	/* The OTG FS has an internal soft pull-up */
-
-	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
-
-#ifdef CONFIG_STM32F7_OTGFS
-	stm32_configgpio(GPIO_OTGFS_VBUS);
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
 #endif
-}

 /************************************************************************************
- * Name:  stm32_usbsuspend
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
 *
 * Description:
- *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
- *   used.  This function is called whenever the USB enters or leaves suspend mode.
- *   This is an opportunity for the board logic to shutdown clocks, power, etc.
- *   while the USB is suspended.
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
 *
 ************************************************************************************/
-__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+
+int can_devinit(void)
 {
-	uinfo("resume: %d\n", resume);
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
 }
+
+#endif
+
+#endif /* CONFIG_CAN */
@@ -1,37 +1,12 @@
-/****************************************************************************
+/*
+ * hw_config.h
 *
- *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
+ *  Created on: May 17, 2015
+ *      Author: david_s5
+ */

-#pragma once
+#ifndef HW_CONFIG_H_
+#define HW_CONFIG_H_

 /****************************************************************************
 * 10-8--2016:
@@ -94,14 +69,14 @@

 //#define USE_VBUS_PULL_DOWN
 #define INTERFACE_USART                1
-#define INTERFACE_USART_CONFIG         "/dev/ttyS0,57600"
+#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
 #define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     139
+#define BOARD_TYPE                     57
 #define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
 #define BOARD_FLASH_SECTORS            (15)
 #define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)

-#define OSC_FREQ                       8
+#define OSC_FREQ                       16

 #define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
 #define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
@@ -110,6 +85,22 @@

 #define SERIAL_BREAK_DETECT_DISABLED   1

+/*
+ * Uncommenting this allows to force the bootloader through
+ * a PWM output pin. As this can accidentally initialize
+ * an ESC prematurely, it is not recommended. This feature
+ * has not been used and hence defaults now to off.
+ *
+ * # define BOARD_FORCE_BL_PIN_OUT         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
+ * # define BOARD_FORCE_BL_PIN_IN          (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
+ *
+ * # define BOARD_POWER_PIN_OUT           (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
+ * # define BOARD_POWER_ON                 1
+ * # define BOARD_POWER_OFF                0
+ * # undef  BOARD_POWER_PIN_RELEASE        // Leave pin enabling Power - un comment to release (disable power)
+ *
+*/
+
 #if !defined(ARCH_SN_MAX_LENGTH)
 # define ARCH_SN_MAX_LENGTH 12
 #endif
@@ -133,3 +124,5 @@
 #ifndef BOOT_DEVICES_FILTER_ONUSB
 #  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
 #endif
+
+#endif /* HW_CONFIG_H_ */
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Christian Rauch	437b6b9844	remove unused debug.h	2023-08-14 11:03:24 -04:00
Christian Rauch	43ec73165f	BMI0xx: remove unused board_dma_alloc.h	2023-08-14 11:03:24 -04:00
Christian Rauch	ecbbaeb457	ADIS16497: replace NuttX specific up_udelay with HAL version px4_udelay	2023-08-14 11:03:24 -04:00
Christian Rauch	345d814ca4	enable common barometer, IMU and magnetometer	2023-08-14 11:03:24 -04:00
Christian Rauch	c2b10ced8d	linux_pwm_out must link mixer_module	2023-08-14 10:52:37 -04:00
Christian Rauch	2bcb3ea3f7	skip SSH key check for simpler builds in the Docker container	2023-08-14 10:50:28 -04:00
bresch	dcb4c182fe	ekf2: stop GNSS fusion when fix is loss	2023-07-21 10:21:57 +02:00
Matthias Grob	5736a31a67	rc.interface: explicitly save empty ESC mask	2023-07-13 16:27:38 +02:00
Mathieu Bresciani	cc26cf4121	mc_pos_control: fix potential thrust spike on hover thrust change Co-authored-by: Josh Henderson <hendjoshsr71@gmail.com> Co-authored-by: Matthias Grob <maetugr@gmail.com>	2023-06-16 15:52:52 +02:00
Beat Küng	504d951c75	fix kconfig: rename LINUX to LINUX_TARGET LINUX is defined by cmake >= 3.25: https://cmake.org/cmake/help/latest/variable/LINUX.html	2023-04-21 07:42:20 +02:00
David Sidrane	1c8ab2a0d7	[BACKPORT] px4_fmu-v6c:Add Mini & fix Rev 1 (#21227 )	2023-03-06 12:21:07 -08:00
Julian Oes	6d27784013	nuttx: update submodule to clean backport branch This should be identical but now cleanly pointing to the px4_firmware_nuttx-10.1.0+ branch.	2023-03-02 03:53:29 -08:00
David Sidrane	a8f29bc2aa	px4_fmu-v6x:Fix CUAV Sensor Set startup (#21221 ) Reverts part of `3c10e34a49` not applicable to V1.13 VER/REV system.	2023-03-01 09:15:03 -08:00
Beat Küng	4bcbfec6cb	nuttx: update submodule (DMA + mmcsd fixes)	2023-02-22 06:32:16 +13:00
Leonardo Garcia	c7b9e160b8	mro/pixracerpro: add missing px4_platform_configure() call (#21161 )	2023-02-21 09:30:59 +01:00
alexklimaj	5334ec1ef0	Move uavcan start to end of rcS to prevent sd card read lock	2023-02-13 22:34:58 -05:00
alexklimaj	486674a652	Add ARK PAB Carrier Add ARK_FMU_V6X to RCS netman Remove arkv6x rc single wire Fix arkv6x mtd arkv6x bootloader init all pins to prevent power cycling peripherals on boot arkv6x don't power cycle sd card on boot arkv6x add UART4 Telem 4	2023-02-13 22:34:58 -05:00
alexklimaj	6af8e34596	boards: arkv6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS	2023-02-13 22:34:58 -05:00
FriedrichTuttas	ec06fae3fd	boards: px4_fmu-v6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS (#20974 ) - https://github.com/PX4/PX4-Autopilot/issues/20762 Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>	2023-02-07 22:29:52 -05:00
Daniel Agar	7001d90d84	lib/sensor_calibration: BiasCorrectedSensorOffset() don't incorporate thermal offsets - the thermal offsets are an optional correction applied to the raw data, so when updating an existing calibration offset with new learned bias we don't want this incorporated	2023-02-07 09:12:09 -05:00
CUAVmengxiao	ca9af1ca9e	drivers: add support for ICP101XX and ICP201XX	2023-02-06 15:19:49 -05:00
Ryan Meagher	7a6cfce0ca	drivers/barometer/invensense: fix icp10111 and icp10100 * fix icp so it compiles * add icp10111 and icp10100 DEVTPYE	2023-02-06 15:19:39 -05:00
David Sidrane	3c10e34a49	fmu-v6x:CUAV HW Version changes	2023-02-06 15:17:32 -05:00
CUAVmengxiao	58cc105493	px4_fmu-v6X: add CUAV board	2023-02-06 15:16:28 -05:00
Thomas Watson	9cf38206f6	boards/mro/pixracerpro: fix voltage/current monitoring This corrects the board definition to use the proper polarity for the brick power valid signal, thus allowing the board to detect the battery and monitor it properly.	2023-02-06 15:13:25 -05:00
Claudio	2295ee9164	msg/tools/generate_microRTPS_bridge.py allow ROS2 distro humble Co-authored-by: Claudio Fritsche <claudio@onesecdelivery.com>	2023-01-23 09:48:24 -05:00
Julian Oes	37cb24afd8	mavlink_shell: fix stall on CubeOrange On CubeOrange where no console is configured by default, starting MAVLink shell just stalls, and doesn't work. Also, logfile download has been reported not to work, and again, seems to work with this change. Signed-off-by: Julian Oes <julian@oes.ch>	2023-01-04 22:33:36 -05:00
Beat Küng	985482badb	mixer_module: only advertise actuator_outputs when mixer is loaded	2022-12-16 07:50:57 +01:00
bresch	beddb3969e	GyroCalibration: update sensor correction before using it Otherwise, the thermal offset value can be outdated	2022-11-23 14:25:31 -05:00
bresch	4481c3bc1f	TC: erase current calibration when temp cal is completed	2022-11-23 14:25:31 -05:00
Julian Oes	46a12a09bf	fmu-v2: make optional sensor startup quiet Signed-off-by: Julian Oes <julian@oes.ch>	2022-11-22 21:12:09 +13:00
bresch	72becdf407	ekf2: do not fuse ZVU if other velocity source is active	2022-11-15 13:11:06 -05:00
Matthias Grob	228def6081	mission_block: explicitly (re)set the acceptance radius to default for takeoff items otherwise a previously adjusted or uninitialized radius from the last flight can cause problems during the new takeoff	2022-11-11 14:48:45 +13:00
Matthias Grob	092562dc51	mission_block: minimal acceptance radius of 1mm to avoid float rounding errors leading to tiny acceptance radii getting considered	2022-11-11 14:48:45 +13:00
Daniel Agar	9fdf5ada40	boards: px4_fmu-v6x_default include systemcmds/gpio	2022-11-07 17:11:28 -05:00
Daniel Agar	872ac68daf	vehicle_magnetometer: fix standalone mag bias est factored into in flight mag cal - preflight mag bias estimate is in the vehicle body frame and removed from the raw mag data after it's rotated, calibrated, etc - in flight mag bias (from ekf2) is in the vehicle body frame, but stored as a sensor frame offset immediately	2022-11-07 09:31:49 -05:00
David Sidrane	b46c608f6e	px4_fmu-v6:Add Revision 1 to manifest to note I2C4 is only internal	2022-11-03 07:32:40 +13:00
Julian Oes	37cf8024c3	Holybro PX4Vision: Don't use IO	2022-11-03 07:32:25 +13:00
Silvan Fuhrer	65d22120b2	Navigator: initialize _mission_item for all navigation modes in Navigator::Navigator() This fixes the issue where the init happended in the initializer list, at which point the params were not yet initialized and thus resulted in random values for the init values of _mission_item.loiter_radius and .acceptance_radius. Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2022-10-27 13:20:29 +02:00
Thomas Stastny	dc7f29e2ec	welford mean: protect against negative variances	2022-10-05 10:29:03 -04:00
Thomas Stastny	fbef296890	welford mean: convert to matrix only template	2022-10-05 10:29:03 -04:00
Daniel Agar	6ce38b8296	vehicle_imu: only reset raw accel/gyro Welford mean periodically - vehicle_imu_status can publish immediately on any measured sample rate change or sensor error increment, but the windowed mean/variance shouldn't necessarily reset that often	2022-10-05 10:29:03 -04:00
Julian Oes	e3d730ea37	ms5611: ignore reading 0 This prevents publishing a negative pressure which leads to a NAN altitude estimate further down the line.	2022-10-04 09:42:16 -04:00
alexklimaj	d22d33e936	Fix ARKV6X control allocator with base boards	2022-09-29 14:24:20 -04:00
bresch	1ea4fe9b7b	Mag: fix estimated bias save to calibration Clear the calibration at the end only otherwise everything gets erased at the end of the first iteration of the outer loop	2022-09-28 10:03:35 -04:00
Julian Oes	2e7df77bff	uavcan: fix RTCM corrections publication Before this fix, this function would stall and somehow never return.	2022-09-27 22:01:48 -04:00
Julian Oes	241abb933a	libuavcan: update submodule This fixes a Python 3.10 issue for me.	2022-09-27 21:55:08 -04:00
Julian Oes	02c281c3e8	fmu-v5x: support for mini base board This was forgotton with all the merges and shuffling previously.	2022-09-27 05:45:22 +13:00
Julian Oes	280f2e3abc	fmu-v3: make optional sensor startup quiet This fixes the errors showing up at startup for me with a Black Cube.	2022-09-27 05:45:22 +13:00
Julian Oes	22f338b58c	fmu-v6x: alias, add VX43 - alias from hw_mft_list_v0650 to hw_mft_list_v0600 as it is the same - add V6X50 again	2022-09-27 05:45:22 +13:00
Julian Oes	5b60985494	fmu-v5x: alias for duplicates, remove commented - Removed commented out config data. - hw_mft_list_v0540 was the same as hw_mft_list_v0500	2022-09-27 05:45:22 +13:00
Julian Oes	51607928c0	fmu-v6: disable Rev 0, Rev 1 for HB Mini, and CM4 As I understand it, only Rev 3 and Rev 4 were shipped by HB for Mini and CM4, and are likely to be used for it. It would be nice to have all combinations but it requires quite some flash in the current implementation.	2022-09-27 05:45:22 +13:00
Julian Oes	426d13a82e	fmu-v5x: disable rev0 for HB Mini and CM4 base As I understand it, only Rev 1 and Rev 2 were shipped by HB, and likely to be used for the Mini and CM4.	2022-09-27 05:45:22 +13:00
Julian Oes	90c0d77c7b	platforms: decrease flash usage by type for bus id My assumption is that the bus are numbered < 127. This saves about 100 bytes of flash.	2022-09-27 05:45:22 +13:00
vincentpoont2	fdc7ee3674	update fmu-v6x rc.board_sensors, add V6X004003	2022-09-27 05:45:22 +13:00
vincentpoont2	eef7b35747	update fmuv5x rc.board_sensors with V5X004000	2022-09-27 05:45:22 +13:00
Vincent Poon	65b1370ad1	update v5x rc.board_sensors add V5X004002	2022-09-27 05:45:22 +13:00
Vincentpoont2	0e0324de5d	Correct BOARD_NUM_SPI_CFG_HW_VERSIONS at board_config.h	2022-09-27 05:45:22 +13:00
Vincentpoont2	73e6660411	Fix Error on manifest.c	2022-09-27 05:45:22 +13:00
Vincentpoont2	7ff373fee2	Fix Error on board_config.h Define on FMUv5X & FMUv6X	2022-09-27 05:45:22 +13:00
Vincentpoont2	f4a5c71ccd	Add Holybro Pixhawk Pi CM4 Baseboard Support	2022-09-27 05:45:22 +13:00
Julian Oes	3ccde2f4db	cuav_x7pro: save flash on test target	2022-09-23 20:55:41 +12:00
Julian Oes	dbf1f31bec	boards/platform: remove confusing override This removes the odd px4_i2c_bus_external override which was confusing me and lead to odd and inconsistent results. The function is now only available with an int as the argument.	2022-09-23 20:55:41 +12:00
alexklimaj	61d2b13e43	Add BMP390 to BMP388 driver	2022-09-20 20:34:23 -04:00
Julian Oes	8cfc4fc7ca	boards: save some flash on CubeOrange test config	2022-09-20 18:56:04 -04:00
vincentpoont2	ebc67464c3	Add PX4 vision v1.5 Airframe	2022-09-20 18:56:04 -04:00
Daniel Agar	a5a9b1011a	[DO NOT MERGE] px4_i2c_device_external hacks	2022-09-20 18:54:28 -04:00
Julian Oes	1ad71eefa1	px4_fmu-v6c: Move I2C 4 back to External This is a revert of the revert. This reverts commit `1080855f4d`.	2022-09-20 18:54:28 -04:00
Julian Oes	7786bf6dbc	fmu-v6c: internal baro and mag on external bus This swaps the internal baro and mag back to the bus which is both internal an external but configured as external for this case.	2022-09-20 18:54:28 -04:00
Alex Klimaj	af0d53cdc9	boards: V1.13.0 ARKV6X Backport (#20253 )	2022-09-20 18:53:48 -04:00
RomanBapst	79367ed417	standard: fixed pusher assist in hover - in hover mode the pusher assist is already set in update_mc_state() Signed-off-by: RomanBapst <bapstroman@gmail.com>	2022-09-15 13:07:27 -04:00
David Sidrane	417c973cc9	px4_fmu-v6x:HB Mini add Ver 3, Ver 4 init	2022-09-09 15:43:10 +12:00
Daniel Agar	26f912eb8a	icm42670p run at full speed	2022-09-06 16:23:14 +12:00
Daniel Agar	e7d18960a5	drivers/imu/invensense/icm42670p: cleanup and small fixes	2022-09-06 16:23:14 +12:00
Daniel Agar	8a54b21e7d	adis16470: fix accel and gyro scaling	2022-08-17 11:40:30 -04:00
RomanBapst	baab4501f6	gps_inject_data: fixed integer overflow - array length of data was increased without changing the data type of the variable holding the length Signed-off-by: RomanBapst <bapstroman@gmail.com>	2022-07-13 11:20:35 -04:00
bresch	b30c2c22b3	ekf2: do not run rng kinematic consistency check for fixed-wings As they are always moving horizontally, the check doesn't make sense for fixed-wings. Also don't run the check while on ground to prevent getting a failed check during pre-takeoff manipulation.	2022-07-12 13:54:30 -04:00
Daniel Agar	cc7e709597	uavcan: GNSS optionally publish RTCMStream or MovingBaselineData	2022-07-12 13:54:21 -04:00
Daniel Agar	416610afc3	differential_pressure/sdp3x: sdp3x_main fix 'keep running' regression	2022-07-12 13:54:11 -04:00
David Sidrane	841797da2a	px4_fmu-v6X:Added Holybro mini base board	2022-07-01 15:33:08 -04:00
David Sidrane	55706108b6	uc_stm32h7_can:Correct initalization of the mumber of interfaces H7 Only supports 2 not 3 CAN interfaces. CanInitHelper passes in in the run time configuration of the number of interfaces. The code was ignoring these!	2022-07-01 15:32:53 -04:00
David Sidrane	e1f86f510b	px4_fmu-v5X:Added Holybro mini base board	2022-07-01 15:32:44 -04:00
David Sidrane	17ef175402	px4_fmu-v6x:Add Rev 4 Sensors	2022-07-01 15:32:09 -04:00
Alex Klimaj	f9980e0721	uavcannode: Fix dronecan baro units	2022-06-17 14:44:32 -04:00
Daniel Agar	6823cbc414	sensors/vehicle_angular_velocity: add IMU_GYRO_RATEMAX constraints	2022-06-07 16:23:01 -04:00
Daniel Agar	beaebe4d0b	sensors/vehicle_imu: don't bother checking IMU_GYRO_RATEMAX	2022-06-07 16:22:54 -04:00
Daniel Agar	0bddca6b9b	boards: NuttX update all boards to preallocated sem holder list - CONFIG_SEM_PREALLOCHOLDERS=32 - CONFIG_SEM_NNESTPRIO=16 (default)	2022-05-29 13:49:01 -04:00
Daniel Agar	c50c1e3982	update NuttX and apps to latest with sem holder fixes and updated ostest	2022-05-29 13:48:15 -04:00
Daniel Agar	a249b77647	boards: reduce SPI DMA buffers on older STM32F4 boards - on common IMUs like the mpu6000, mpu9250, icm20602, etc each FIFO sample is only 12 bytes so this is still more than large enough for the worst case transfer	2022-05-27 16:28:26 -04:00
Daniel Agar	17de164e95	boards: pixhawk 2 cube skip starting low quality l3gd20 gyro to save memory and cpu - free memory is getting tight on these older boards (depending on configuratoin) and the pixhawk 2 cube still has 2 other superior IMUs, so this is just dropping dead weight	2022-05-27 16:28:22 -04:00
David Sidrane	a057b38c40	Update all H7 Bootloders	2022-05-27 14:52:00 -04:00
David Sidrane	39e53711d5	flash_cache:Flush complete cache line	2022-05-27 14:44:54 -04:00
David Sidrane	1294851bb6	boards: STM32H7 pad to 256 bit - 32 bytes (#19724 )	2022-05-27 14:44:51 -04:00
David Sidrane	1c15a1a7f4	px4_fmu-v6c:Fix mag rotation	2022-05-27 14:43:47 -04:00
David Sidrane	21567ca187	boards: new px4_fmu-v6c board support (#19544 )	2022-05-27 14:42:55 -04:00
bresch	8e789bcc7f	ekf2_post-processing: use estimator_status_flags instead of bitmasks	2022-05-24 10:30:52 -04:00
Julian Oes	d699d5f27e	sitl_gazebo: update submodule This fixes the issue where HITL doesn't connect over USB.	2022-05-24 09:43:05 -04:00
Julian Oes	4ae97c505f	commander: lockdown is not termination We use lockdown to prevent outputs like motors and servos from being active in HITL simulation. This means that we can't treat the lockdown flag as a flight_terminated, otherwise we can't arm in HITL at all.	2022-05-24 09:42:38 -04:00
Daniel Agar	b8ce2a6039	icm42688p: only check configured registers periodically (as intended)	2022-05-23 14:58:37 -04:00
bresch	1f399e5b33	ekf2: use explicit flags instead of bitmask position This prevents bitmask mismatch when a new flag is inserted	2022-05-23 14:57:17 -04:00
Serhat Aksun	d67cddae7d	sensors/vehicle_magnetometer: fix multi_mode check Signed-off-by: Serhat Aksun <serhat.aksun@maxwell-innovations.com>	2022-05-23 10:10:22 -04:00
Julian Oes	0290282b17	ROMFS: disable UAVCAN in HITL Without this, uavcan creates MixingOutput classes which then create empty actuator_outputs publications. This then prevents the motor output in HITL to be forwarded to the simulator via mavlink.	2022-05-22 10:27:07 -04:00
Nicolas MARTIN	39d1c79f48	HITL: undefined time_remaining_s should be NAN	2022-05-20 09:40:28 -04:00
Nico van Duijn	ad410a2512	Commander: ignore MAV_CMD_REQUEST_MSG This commit adds the MAV_CMD_REQUEST_MESSAGE to the list of vehicle commands which are ignored without generating a warning sound.	2022-05-20 09:40:22 -04:00
Daniel Agar	453acdce31	.vscode/.gitignore ignore all log files	2022-05-20 09:40:07 -04:00
Beat Küng	afb2538da3	output drivers: init SmartLock after exit_and_cleanup This fixes an invalid memory access when exiting the module: exit_and_cleanup destroys the object, but lock_guard is destructed after and accesses the lock.	2022-05-12 08:17:15 -04:00
alexklimaj	af58c412c3	Fix uavcan battery causing immediate RTL time remaining low	2022-05-11 21:49:13 -04:00
Daniel Agar	d5226b28ce	drivers/rc_input: ensure RC inversion is disabled initially and latch RC_INPUT_PROTO conservatively - this allows jumping straight to a non-SBUS RC protocol - increased the scan time per protocol 300->500 ms, which the newer DSM parser seems to need in some cases. - only set RC_INPUT_PROTO if we've had a successful RC lock for > 3 seconds	2022-05-11 14:31:51 -04:00
Beat Küng	b091ea9fd9	log_writer_file: fix corner case when mission log is enabled Normally _should_run for mission is only ever true if _should_run for the normal log is. There are exceptions though: - the log buffer fails to allocate - there was a write failure (e.g. due to SD card removal) In that situation, the writer would not wait anymore but busy-loop.	2022-05-11 10:07:46 -04:00
Beat Küng	9e91ca8294	log_writer_file: protect access to _should_run, use px4::atomicbool for _exit_thread	2022-05-11 10:07:46 -04:00
Igor Mišić	8302f076e7	uavcan: use timer 6 by default on stm32f7	2022-05-10 12:43:26 -04:00
Thomas Stastny	de26ffa6e0	fw pos ctrl: turn back to takeoff point with npfg	2022-05-06 13:08:07 -04:00
Thomas Stastny	f60d38db65	fw pos ctrl: add missing guidance control interval setting to control_manual_position()	2022-05-06 13:08:07 -04:00
Thomas Stastny	5e3c8d2fa0	fw pos ctrl: fix state switching logic for takeoff and landing	2022-05-06 13:08:07 -04:00
Matthias Grob	90998837ec	Commander: ensure diconnected battery is cleared from bit field	2022-05-06 10:46:40 -04:00
Beat Küng	8cff9a1e04	commander: fix incorrect return in set_link_loss_nav_state() If both local position and altitude were not valid, then both RC loss and datalink loss would not trigger any failsafe at all, independently from the configured action.	2022-05-06 10:15:30 -04:00
bresch	f8ff34f82d	ekf2: optimize KHP computation Calculating K(HP) takes less operations than (KH)P because K and H are vectors. Without considering the sparsity optimization: - KH (2424 operations) is then a 24x24 matrix an it takes 24^3 operations to multiply it with P. Total: 14400 op - HP (24(24+24-1) operations) is a row vector and it takes 24 operations to left-multiply it by K. Total:1152 op	2022-05-06 10:15:26 -04:00
Beat Küng	e69d9ec48f	dshot: avoid using pwm failsafe params when dynamic mixing is enabled	2022-05-02 11:43:51 +02:00
Beat Küng	f033e164fe	fix dshot: remove setAllFailsafeValues Fixes a regression from `c1e5e666f0`, where with static mixers the dshot outputs would go to max instead of 0 in a failsafe case.	2022-04-28 13:29:40 -04:00
Daniel Agar	41191765ad	drivers/rc_input: RC_INPUT_PROTO parameter minimal implementation (#19539 ) Co-authored-by: chris1seto <chris12892@gmail.com> Co-authored-by: chris1seto <chris12892@gmail.com>	2022-04-28 13:27:15 -04:00