AirspeedValidated: correct typo

add comment explaining fallback to trim
AirspeedModule: use TECS throttle
2026-06-13 17:20:05 +08:00 · 2026-01-06 15:51:25 +01:00 · 2026-01-06 15:51:25 +01:00 · 2026-01-06 15:47:20 +01:00 · 2026-01-06 11:41:06 +01:00 · 2026-01-06 17:36:44 +13:00
957 changed files with 24723 additions and 7599 deletions
@@ -1,22 +1,9 @@
 <!--

-Thank you for your contribution!
-
-Get early feedback through
- Dronecode Discord: https://discord.gg/dronecode
- PX4 Discuss: http://discuss.px4.io/
- opening a draft pr and sharing the link
-
-->
-
 ### Solved Problem
-When ... I found that ...
-
 Fixes #{Github issue ID}

 ### Solution
- Add ... for ...
- Refactor ...

 ### Changelog Entry
 For release notes:
@@ -27,11 +14,10 @@ Documentation: Need to clarify page ... / done, read docs.px4.io/...
 ```

 ### Alternatives
-We could also ...

 ### Test coverage
- Unit/integration test: ...
- Simulation/hardware testing logs: https://review.px4.io/

 ### Context
 Related links, screenshot before/after, video
+
+-->
@@ -0,0 +1,48 @@
+---
+applyTo: "docs/en/**"
+---
+
+# Review Guidelines docs/en Tree
+
+## File System & Structure
+
+- **Naming:** Use `lowercase_with_underscores` for all filenames. No spaces.
+- **Hierarchy:** Markdown files must reside exactly in a first-level category folder. 
+  - Valid: `docs/en/category/file.md`
+  - Invalid: `docs/en/category/subcategory/file.md`
+- **Text Files:** Any `.txt` or `.text` files must start with an underscore (e.g., `_notes.txt`).
+- **Assets:** All images/non-docs must be in `/docs/assets/`. Deep nesting is permitted here.
+- **Formats:** Prefer **SVG** for diagrams and **PNG** for screenshots. Flag JPG files.
+
+## Markdown & Style
+
+- **Headings:** Use Title Case ("First Letter Capitalisation"). 
+  - The Page Title must be the only H1 (`#`). All others must be `##` or lower.
+  - Do not apply bold or italic styling inside a heading.
+- **Formatting:** 
+  - **Bold:** Only for UI elements (buttons, menu items).
+  - **Italics (Emphasis):** For tool names (e.g., *QGroundControl*).
+  - **Inline Code:** Use backticks for file paths, parameters, and CLI commands (e.g., `prettier`).
+- **Structure:** End every line at the end of a sentence (Semantic Line Breaks).
+
+## Linking & Navigation
+
+- **Standard Links:** Use standard inline syntax: `[link text](../category/filename.md)`.
+  Note relative link. 
+- **Table Links:** To keep tables readable, use reference-style links.
+  - Definition: `[Link Name]: https://example.com` (placed below the table).
+  - Usage: `[Link Name]` within the table cell.
+- **Images:** All image links must include a descriptive, accessible alt-text in the brackets: `![Detailed description of the image content](../../assets/path/to/image.png)`.
+  Note that all images should be relative references to images stored in the assets folder, which should be two folders below the any markdown file (as they are stored in a "category" subfolder) 
+
+- **Standard Links:** Use standard inline syntax: `[link text](../category/filename.md)`. Note the use of relative links.
+- **Table Links:** To keep tables easier to edit, prefer reference-style links.
+  - Definition: `[Link Name]: https://example.com` (placed below the table).
+  - Usage: `[Link Name]` within the table cell.
+- **Images:** All image links must include a descriptive, accessible alt-text: `![Detailed description of the image content](../../assets/path/to/image.png)`.
+  - **Note:** All images must be relative references to the `/docs/assets/` folder. Since documents are nested in a category folder, this is usually two levels up (`../../assets/`).
+
+## Quality Control
+
+- **Prettier Check:** Ensure Prettier rules have been applied. If there is evidence of inconsistent indentation or spacing, request the author run `npx prettier --write .` before merging.
+- **Language:** Enforce **UK English** spelling and grammar.
@@ -54,6 +54,7 @@ jobs:
        run: |
          make clean
          make distclean
+          make submodulesclean

      - name: If it's a PR checkout the base branch
        if: ${{ github.event.pull_request }}
@@ -118,7 +118,7 @@ jobs:
          PX4_HOME_LON: ${{matrix.config.longitude}}
          PX4_HOME_ALT: ${{matrix.config.altitude}}
          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose --force-color
+        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} test/mavsdk_tests/configs/sitl.json --verbose --force-color
        timeout-minutes: 45

      - name: Upload failed logs
@@ -15,7 +15,7 @@ jobs:
          stale-issue-label: 'stale'
          stale-pr-label: 'stale'
          remove-stale-when-updated: true
-          stale-issue-message: 'This issue has been marked as stale due to 90 days of inactivity. If no further activity occurs, it will be automatically closed in 30 days. Please leave a comment, add a reaction, make an update, or remove the stale label if you’d like to keep it open.'
-          close-issue-message: 'This issue has been closed due to prolonged inactivity after being marked as stale. If you believe this was closed in error or the topic is still relevant, please feel free to reopen it or create a new issue.'
-          stale-pr-message: 'This PR was identified as stale and it will be closed in 30 days unless any activity is detected.'
-          close-pr-message: 'This pull request has been closed after being marked as stale with no further activity. Thank you for the time and effort you put into this contribution. If you’d like to continue the discussion or update the work, please feel free to reopen it or submit a new PR.'
+          stale-issue-message: ''
+          close-issue-message: 'This issue has been automatically closed due to 120 days of inactivity. If you believe this is still relevant, please feel free to reopen it or create a new issue.'
+          stale-pr-message: ''
+          close-pr-message: 'This pull request has been automatically closed due to 120 days of inactivity. If you would like to continue, please feel free to reopen it or submit a new PR.'
@@ -0,0 +1,62 @@
+name: Sync ROS 2 messages to px4_msgs
+on:
+  push:
+    branches:
+      - 'main'
+      - 'stable'
+      - 'beta'
+      - 'release/**'
+    paths:
+      - 'msg/**'
+      - 'srv/**'
+  workflow_dispatch:
+
+permissions:
+  contents: read
+
+jobs:
+  sync_to_px4_msgs:
+    if: github.repository == 'PX4/PX4-Autopilot'
+    runs-on: [runs-on,runner=4cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}",spot=false]
+    steps:
+      - name: Checkout PX4 repo
+        uses: actions/checkout@v4
+
+      - name: Setup git credentials
+        run: |
+          git config --global user.name "${{ secrets.PX4BUILDBOT_USER }}"
+          git config --global user.email "${{ secrets.PX4BUILDBOT_EMAIL }}"
+
+      - name: Clone PX4_msgs repo
+        run: |
+          git clone https://${{ secrets.PX4BUILTBOT_PERSONAL_ACCESS_TOKEN }}@github.com/PX4/px4_msgs.git
+
+      - name: Check out the same branch as the PX4 repo
+        run: |
+          cd px4_msgs
+          if git checkout ${{ github.ref_name }}; then
+            echo "Checked out existing branch"
+          else
+            git checkout -b ${{ github.ref_name }}
+          fi
+
+      - name: Copy ROS 2 messages
+        run: |
+          rm -f px4_msgs/msg/*.msg
+          rm -f px4_msgs/msg/versioned/*.msg
+          rm -f px4_msgs/srv/*.srv
+          rm -f px4_msgs/srv/versioned/*.srv
+          cp msg/*.msg px4_msgs/msg/
+          cp msg/versioned/*.msg px4_msgs/msg/ || true
+          cp srv/*.srv px4_msgs/srv/
+          cp srv/versioned/*.srv px4_msgs/srv/ || true
+
+      - name: Commit and push changes
+        run: |
+          cd px4_msgs
+          git status
+          git add .
+          git commit -a -m "Update to PX4 ${{ github.sha }}" || true
+          git push origin ${{ github.ref_name }} || true
+          cd ..
+          rm -rf px4_msgs
@@ -531,3 +531,13 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: svehicle_e2_default
+    x-mav_ap-h743r1_bootloader:
+      short: x-mav_ap-h743r1-boot
+      buildType: MinSizeRel
+      settings:
+        CONFIG: x-mav_ap-h743r1_bootloader
+    x-mav_ap-h743r1_default:
+      short: x-mav_ap-h743r1
+      buildType: MinSizeRel
+      settings:
+        CONFIG: x-mav_ap-h743r1_default
@@ -220,36 +220,6 @@ pipeline {
          }
        }

-        stage('PX4 ROS msgs') {
-          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
-          }
-          steps {
-            sh('export')
-            sh('make distclean; git clean -ff -x -d .')
-            withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
-              sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
-              // 'main' branch
-              sh('rm -f px4_msgs/msg/*.msg')
-              sh('rm -f px4_msgs/msg/versioned/*.msg')
-              sh('rm -f px4_msgs/srv/*.srv')
-              sh('rm -f px4_msgs/srv/versioned/*.srv')
-              sh('cp msg/*.msg px4_msgs/msg/')
-              sh('cp msg/versioned/*.msg px4_msgs/msg/ || true')
-              sh('cp srv/*.srv px4_msgs/srv/')
-              sh('cp srv/versioned/*.srv px4_msgs/srv/ || true')
-              sh('cd px4_msgs; git status; git add .; git commit -a -m "Update message definitions `date`" || true')
-              sh('cd px4_msgs; git push origin main || true')
-              sh('rm -rf px4_msgs')
-            }
-          }
-          when {
-            anyOf {
-              branch 'main'
-            }
-          }
-        }
-
        stage('S3') {
          agent {
            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
@@ -11,8 +11,6 @@ PX4_SIM_MODEL=${PX4_SIM_MODEL:=advanced_plane}

 param set-default SIM_GZ_EN 1

-param set-default SENS_EN_ARSPDSIM 1
-
 param set-default FW_LND_ANG 8

 param set-default FW_PR_FF 0.08
@@ -0,0 +1,167 @@
+#!/bin/sh
+#
+# @name KTH-ATMOS
+#
+# @type Free-Flyer
+# @class Spacecraft
+#
+# @output Motor1 back left thruster, +x thrust
+# @output Motor2 front left thruster, -x thrust
+# @output Motor3 back right thruster, +x thrust
+# @output Motor4 front right thruster, -x thrust
+# @output Motor5 front left thruster, +y thrust
+# @output Motor6 front right thruster, -y thrust
+# @output Motor7 back left thruster, +y thrust
+# @output Motor8 back right thruster, -y thrust
+#
+# @maintainer discower-io
+# @url https://atmos.discower.io
+#
+
+. ${R}etc/init.d/rc.sc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=atmos_dual}
+
+param set-default SIM_GZ_EN 1
+
+param set-default SENS_EN_MAGSIM 1
+param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
+param set-default FD_ESCS_EN 0
+
+param set-default CA_AIRFRAME 14
+param set-default MAV_TYPE 45
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 0
+
+# Auto to be provided by Custom Airframe
+param set-default CA_METHOD 0
+
+# Set proper failsafes
+param set-default COM_ACT_FAIL_ACT 0
+param set-default COM_LOW_BAT_ACT 0
+param set-default NAV_DLL_ACT 0
+param set-default GF_ACTION 1
+param set-default NAV_RCL_ACT 1
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+param set-default CA_ROTOR0_PX -0.12
+param set-default CA_ROTOR0_PY -0.12
+param set-default CA_ROTOR0_PZ 0.0
+param set-default CA_ROTOR0_CT 1.4
+param set-default CA_ROTOR0_AX 1.0
+param set-default CA_ROTOR0_AY 0.0
+param set-default CA_ROTOR0_AZ 0.0
+
+param set-default CA_ROTOR1_PX 0.12
+param set-default CA_ROTOR1_PY -0.12
+param set-default CA_ROTOR1_PZ 0.0
+param set-default CA_ROTOR1_CT 1.4
+param set-default CA_ROTOR1_AX -1.0
+param set-default CA_ROTOR1_AY 0.0
+param set-default CA_ROTOR1_AZ 0.0
+
+param set-default CA_ROTOR2_PX -0.12
+param set-default CA_ROTOR2_PY 0.12
+param set-default CA_ROTOR2_PZ 0.0
+param set-default CA_ROTOR2_CT 1.4
+param set-default CA_ROTOR2_AX 1.0
+param set-default CA_ROTOR2_AY 0.0
+param set-default CA_ROTOR2_AZ 0.0
+
+param set-default CA_ROTOR3_PX 0.12
+param set-default CA_ROTOR3_PY 0.12
+param set-default CA_ROTOR3_PZ 0.0
+param set-default CA_ROTOR3_CT 1.4
+param set-default CA_ROTOR3_AX -1.0
+param set-default CA_ROTOR3_AY 0.0
+param set-default CA_ROTOR3_AZ 0.0
+
+param set-default CA_ROTOR4_PX 0.12
+param set-default CA_ROTOR4_PY -0.12
+param set-default CA_ROTOR4_PZ 0.0
+param set-default CA_ROTOR4_CT 1.4
+param set-default CA_ROTOR4_AX 0.0
+param set-default CA_ROTOR4_AY 1.0
+param set-default CA_ROTOR4_AZ 0.0
+
+param set-default CA_ROTOR5_PX 0.12
+param set-default CA_ROTOR5_PY 0.12
+param set-default CA_ROTOR5_PZ 0.0
+param set-default CA_ROTOR5_CT 1.4
+param set-default CA_ROTOR5_AX 0.0
+param set-default CA_ROTOR5_AY -1.0
+param set-default CA_ROTOR5_AZ 0.0
+
+param set-default CA_ROTOR6_PX -0.12
+param set-default CA_ROTOR6_PY -0.12
+param set-default CA_ROTOR6_PZ 0.0
+param set-default CA_ROTOR6_CT 1.4
+param set-default CA_ROTOR6_AX 0.0
+param set-default CA_ROTOR6_AY 1.0
+param set-default CA_ROTOR6_AZ 0.0
+
+param set-default CA_ROTOR7_PX -0.12
+param set-default CA_ROTOR7_PY 0.12
+param set-default CA_ROTOR7_PZ 0.0
+param set-default CA_ROTOR7_CT 1.4
+param set-default CA_ROTOR7_AX 0.0
+param set-default CA_ROTOR7_AY -1.0
+param set-default CA_ROTOR7_AZ 0.0
+
+param set-default SIM_GZ_EC_FUNC1 101
+param set-default SIM_GZ_EC_FUNC2 102
+param set-default SIM_GZ_EC_FUNC3 103
+param set-default SIM_GZ_EC_FUNC4 104
+param set-default SIM_GZ_EC_FUNC5 105
+param set-default SIM_GZ_EC_FUNC6 106
+param set-default SIM_GZ_EC_FUNC7 107
+param set-default SIM_GZ_EC_FUNC8 108
+param set-default SIM_GZ_EC_FUNC9 301
+param set-default SIM_GZ_EC_FUNC10 302
+param set-default SIM_GZ_EC_FUNC11 303
+param set-default SIM_GZ_EC_FUNC12 304
+
+param set-default SIM_GZ_EC_MIN1 0
+param set-default SIM_GZ_EC_MIN2 0
+param set-default SIM_GZ_EC_MIN3 0
+param set-default SIM_GZ_EC_MIN4 0
+param set-default SIM_GZ_EC_MIN5 0
+param set-default SIM_GZ_EC_MIN6 0
+param set-default SIM_GZ_EC_MIN7 0
+param set-default SIM_GZ_EC_MIN8 0
+param set-default SIM_GZ_EC_MIN9 1100
+param set-default SIM_GZ_EC_MIN10 1100
+param set-default SIM_GZ_EC_MIN11 1100
+param set-default SIM_GZ_EC_MIN12 1100
+
+param set-default SIM_GZ_EC_MAX1 10000
+param set-default SIM_GZ_EC_MAX2 10000
+param set-default SIM_GZ_EC_MAX3 10000
+param set-default SIM_GZ_EC_MAX4 10000
+param set-default SIM_GZ_EC_MAX5 10000
+param set-default SIM_GZ_EC_MAX6 10000
+param set-default SIM_GZ_EC_MAX7 10000
+param set-default SIM_GZ_EC_MAX8 10000
+param set-default SIM_GZ_EC_MAX9 1900
+param set-default SIM_GZ_EC_MAX10 1900
+param set-default SIM_GZ_EC_MAX11 1900
+param set-default SIM_GZ_EC_MAX12 1900
+
+# Controller Tunings
+param set SC_YAWRATE_P 3.335
+param set SC_YAWRATE_I 0.87
+param set SC_YAWRATE_D 0.15
+param set SC_YR_INT_LIM 0.2
+param set SC_YAW_P 3.0
+
+param set SPC_POS_P 0.20
+param set SPC_VEL_P 6.55
+param set SPC_VEL_I 0.0
+param set SPC_VEL_D 0.0
+param set SPC_VEL_MAX 12.0
@@ -118,6 +118,7 @@ px4_add_romfs_files(
 	60002_gz_uuv_bluerov2_heavy

 	70000_gz_atmos
+	70001_gz_atmos_dual

 	# [22000, 22999] Reserve for custom models
 )
@@ -159,24 +159,19 @@ if [ -n "${PX4_SIM_MODEL#*gz_}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
 	fi

 	# Set up camera to follow the model if requested
-	if [ -n "${PX4_GZ_FOLLOW}" ]; then
+	if [ -z "${PX4_GZ_NO_FOLLOW}" ]; then

 		echo "INFO  [init] Setting camera to follow ${MODEL_NAME_INSTANCE}"

-		# Set camera to follow the model
-		${gz_command} service -s "/gui/follow" --reqtype gz.msgs.StringMsg \
-				--reptype gz.msgs.Boolean --timeout 5000 \
-				--req "data: \"${MODEL_NAME_INSTANCE}\"" > /dev/null 2>&1
-
 		# Set default camera offset if not specified
 		follow_x=${PX4_GZ_FOLLOW_OFFSET_X:--2.0}
 		follow_y=${PX4_GZ_FOLLOW_OFFSET_Y:--2.0}
 		follow_z=${PX4_GZ_FOLLOW_OFFSET_Z:-2.0}

 		# Set camera offset
-		${gz_command} service -s "/gui/follow/offset" --reqtype gz.msgs.Vector3d \
-				--reptype gz.msgs.Boolean --timeout 5000 \
-				--req "x: ${follow_x}, y: ${follow_y}, z: ${follow_z}" > /dev/null 2>&1
+		${gz_command} topic -t /gui/track -m gz.msgs.CameraTrack \
+				-p "track_mode: FOLLOW, follow_target: {name: '${MODEL_NAME_INSTANCE}'},\
+				 follow_offset: {x: ${follow_x}, y: ${follow_y}, z: ${follow_z}}, follow_pgain: 1.0, track_pgain: 1.0"

 		echo "INFO  [init] Camera follow offset set to ${follow_x}, ${follow_y}, ${follow_z}"
 	fi
@@ -18,6 +18,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #

 . ${R}etc/init.d/rc.fw_defaults
@@ -16,6 +16,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #

 . ${R}etc/init.d/rc.fw_defaults
@@ -7,6 +7,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #

 . ${R}etc/init.d/rc.mc_defaults
@@ -11,6 +11,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #

 . ${R}etc/init.d/rc.mc_defaults
@@ -9,6 +9,8 @@
 #
 # @board px4_fmu-v2 exclude
 # @board bitcraze_crazyflie exclude
+# @board px4_fmu-v6x exclude
+# @board ark_fmu-v6x exclude
 #

 . ${R}etc/init.d/rc.mc_defaults
@@ -12,7 +12,9 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
+# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
+# @board ark_fmu-v6x exclude
 #

 . ${R}etc/init.d/rc.mc_defaults
@@ -20,6 +20,9 @@

 . ${R}etc/init.d/rc.sc_defaults

+# Overwrite DDS AG IP to `192.168.0.1`
+param set-default UXRCE_DDS_AG_IP -1062731775
+
 param set-default CA_AIRFRAME 14
 param set-default MAV_TYPE 45

@@ -8,9 +8,6 @@ set VEHICLE_TYPE spacecraft
 # MAV_TYPE_SPACECRAFT_ORBITTER
 param set-default MAV_TYPE 45

-# Set micro-dds-client to use ethernet and IP-address 192.168.0.1
-param set-default UXRCE_DDS_AG_IP -1062731775
-
 # Disable preflight disarm to not interfere with external launching
 param set-default COM_DISARM_PRFLT -1
 param set-default CBRK_SUPPLY_CHK 894281
@@ -231,6 +231,12 @@ then
 	ads7953 start -S
 fi

+# ADC sensor tla2528 external I2C
+if param compare -s ADC_TLA2528_EN 1
+then
+	tla2528 start -X
+fi
+
 # probe for optional external I2C devices
 if param compare SENS_EXT_I2C_PRB 1
 then
@@ -17,37 +17,12 @@ if [[ -f $1"/.git" || -d $1"/.git" ]]; then
 	SUBMODULE_STATUS=$(git submodule summary "$1")
 	STATUSRETVAL=$(echo $SUBMODULE_STATUS | grep -A20 -i "$1")
 	if ! [[ -z "$STATUSRETVAL" ]]; then
-		echo -e "\033[31mChecked $1 submodule, ACTION REQUIRED:\033[0m"
-		echo ""
-		echo -e "Different commits:"
+		echo -e "\033[33mWarning: $1 submodule has uncommitted changes:\033[0m"
 		echo -e "$SUBMODULE_STATUS"
 		echo ""
+		echo -e "To update submodules to the expected version, run:"
+		echo -e "   \033[94mgit submodule sync --recursive && git submodule update --init --recursive\033[0m"
 		echo ""
-		echo -e " *******************************************************************************"
-		echo -e " *   \033[31mIF YOU DID NOT CHANGE THIS FILE (OR YOU DON'T KNOW WHAT A SUBMODULE IS):\033[0m  *"
-		echo -e " *   \033[31mHit 'u' and <ENTER> to update ALL submodules and resolve this.\033[0m            *"
-		echo -e " *   (performs \033[94mgit submodule sync --recursive\033[0m                                  *"
-		echo -e " *    and \033[94mgit submodule update --init --recursive\033[0m )                            *"
-		echo -e " *******************************************************************************"
-		echo ""
-		echo ""
-		echo -e "   Only for EXPERTS:"
-		echo -e "   $1 submodule is not in the recommended version."
-		echo -e "   Hit 'y' and <ENTER> to continue the build with this version. Hit <ENTER> to resolve manually."
-		echo -e "   Use \033[94mgit add $1 && git commit -m 'Updated $1'\033[0m to choose this version (careful!)"
-		echo ""
-		read user_cmd
-		if [ "$user_cmd" == "y" ]; then
-			echo "Continuing build with manually overridden submodule.."
-		elif [ "$user_cmd" == "u" ]; then
-			git submodule sync --recursive -- $1
-			git submodule update --init --recursive -- $1 || true
-			git submodule update --init --recursive --force -- $1
-			echo "Submodule fixed, continuing build.."
-		else
-			echo "Build aborted."
-			exit 1
-		fi
 	fi
 else
 	git submodule --quiet sync --recursive --quiet -- $1
@@ -25,15 +25,15 @@ parser.add_argument('-p', '--pretty', dest='pretty', action='store_true',
                    help='Pretty output instead of a single line')
 parser.add_argument('-g', '--groups', dest='group', action='store_true',
                    help='Groups targets')
-parser.add_argument('-f', '--filter', dest='filter', help='comma separated list of board names to use instead of all')
+parser.add_argument('-f', '--filter', dest='filter', help='comma separated list of build target name prefixes to include instead of all e.g. "px4_fmu-v5_"')

 args = parser.parse_args()
 verbose = args.verbose

-board_filter = []
+target_filter = []
 if args.filter:
-    for board in args.filter.split(','):
-        board_filter.append(board)
+    for target in args.filter.split(','):
+        target_filter.append(target)

 default_container = 'ghcr.io/px4/px4-dev:v1.16.0-rc1-258-g0369abd556'
 build_configs = []
@@ -144,7 +144,7 @@ for manufacturer in os.scandir(os.path.join(source_dir, '../boards')):
                label = files.name[:-9]
                target_name = manufacturer.name + '_' + board.name + '_' + label

-                if board_filter and not board_name in board_filter:
+                if target_filter and not any(target_name.startswith(f) for f in target_filter):
                    if verbose: print(f'excluding board {board_name} ({target_name})')
                    continue

@@ -238,6 +238,7 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
            ( 'disarmed', 'Disarmed', 'DIS', False ),
            ( 'min', 'Minimum', 'MIN', False ),
            ( 'max', 'Maximum', 'MAX', False ),
+            ( 'center', 'Center\n(for Servos)', 'CENT', False ),
            ( 'failsafe', 'Failsafe', 'FAIL', True ),
            ]
        for key, label, param_suffix, advanced in standard_params_array:
@@ -284,6 +284,9 @@ Note that non-motor outputs might already be active in prearm state if COM_PREAR
 '''
        minimum_description = \
 '''Minimum output value (when not disarmed).
+'''
+        center_description = \
+'''Servo Center output value (when not disarmed).
 '''
        maximum_description = \
 '''Maxmimum output value (when not disarmed).
@@ -296,6 +299,7 @@ When set to -1 (default), the value depends on the function (see {:}).
        standard_params_array = [
            ( 'disarmed', 'Disarmed', 'DIS', disarmed_description ),
            ( 'min', 'Minimum', 'MIN', minimum_description ),
+            ( 'center', 'Center', 'CENT', center_description ),
            ( 'max', 'Maximum', 'MAX', maximum_description ),
            ( 'failsafe', 'Failsafe', 'FAIL', failsafe_description ),
            ]
@@ -312,6 +316,10 @@ When set to -1 (default), the value depends on the function (see {:}).
                    standard_params[key]['default'] = -1
                    standard_params[key]['min'] = -1

+                if key == 'center':
+                    standard_params[key]['default'] = -1
+                    standard_params[key]['min'] = -1
+
                param = {
                    'description': {
                        'short': channel_label+' ${i} '+label+' Value',
@@ -1656,9 +1656,9 @@ sensor_baro_0['pressure'] = median_filter(sensor_baro_0['pressure'])
 # fit data
 median_pressure = np.median(sensor_baro_0['pressure'])
 if noResample:
-    coef_baro_0_x = np.polyfit(temp_rel,100*(sensor_baro_0['pressure']-median_pressure),5) # convert from hPa to Pa
+    coef_baro_0_x = np.polyfit(temp_rel,(sensor_baro_0['pressure']-median_pressure),5) # pressure in Pascal
 else:
-    temperature, baro = resampleWithDeltaX(temp_rel,100*(sensor_baro_0['pressure']-median_pressure)) # convert from hPa to Pa
+    temperature, baro = resampleWithDeltaX(temp_rel,(sensor_baro_0['pressure']-median_pressure)) # pressure in Pascal
    coef_baro_0_x = np.polyfit(temperature,baro,5)

 baro_0_params['TC_B0_X5'] = coef_baro_0_x[0]
@@ -1675,7 +1675,7 @@ baro_0_x_resample = fit_coef_baro_0_x(temp_rel_resample)
 plt.figure(13,figsize=(20,13))

 # draw plots
-plt.plot(sensor_baro_0['temperature'],100*sensor_baro_0['pressure']-100*median_pressure,'b')
+plt.plot(sensor_baro_0['temperature'],sensor_baro_0['pressure']-median_pressure,'b')
 plt.plot(temp_resample,baro_0_x_resample,'r')
 plt.title('Baro 0 ({}) Bias vs Temperature'.format(baro_0_params['TC_B0_ID']))
 plt.ylabel('Z bias (Pa)')
@@ -1717,9 +1717,9 @@ if num_baros >= 2:
    # fit data
    median_pressure = np.median(sensor_baro_1['pressure'])
    if noResample:
-        coef_baro_1_x = np.polyfit(temp_rel,100*(sensor_baro_1['pressure']-median_pressure),5) # convert from hPa to Pa
+        coef_baro_1_x = np.polyfit(temp_rel,(sensor_baro_1['pressure']-median_pressure),5) # pressure in Pascal
    else:
-        temperature, baro = resampleWithDeltaX(temp_rel,100*(sensor_baro_1['pressure']-median_pressure)) # convert from hPa to Pa
+        temperature, baro = resampleWithDeltaX(temp_rel,(sensor_baro_1['pressure']-median_pressure)) # pressure in Pascal
        coef_baro_1_x = np.polyfit(temperature,baro,5)

    baro_1_params['TC_B1_X5'] = coef_baro_1_x[0]
@@ -1736,7 +1736,7 @@ if num_baros >= 2:
    plt.figure(14,figsize=(20,13))

    # draw plots
-    plt.plot(sensor_baro_1['temperature'],100*sensor_baro_1['pressure']-100*median_pressure,'b')
+    plt.plot(sensor_baro_1['temperature'],sensor_baro_1['pressure']-median_pressure,'b')
    plt.plot(temp_resample,baro_1_x_resample,'r')
    plt.title('Baro 1 ({}) Bias vs Temperature'.format(baro_1_params['TC_B1_ID']))
    plt.ylabel('Z bias (Pa)')
@@ -1778,9 +1778,9 @@ if num_baros >= 3:
    # fit data
    median_pressure = np.median(sensor_baro_2['pressure'])
    if noResample:
-        coef_baro_2_x = np.polyfit(temp_rel,100*(sensor_baro_2['pressure']-median_pressure),5) # convert from hPa to Pa
+        coef_baro_2_x = np.polyfit(temp_rel,(sensor_baro_2['pressure']-median_pressure),5) # pressure in Pascal
    else:
-        temperature, baro = resampleWithDeltaX(temp_rel,100*(sensor_baro_2['pressure']-median_pressure)) # convert from hPa to Pa
+        temperature, baro = resampleWithDeltaX(temp_rel,(sensor_baro_2['pressure']-median_pressure)) # pressure in Pascal
        coef_baro_2_x = np.polyfit(temperature,baro,5)

    baro_2_params['TC_B2_X5'] = coef_baro_2_x[0]
@@ -1797,7 +1797,7 @@ if num_baros >= 3:
    plt.figure(15,figsize=(20,13))

    # draw plots
-    plt.plot(sensor_baro_2['temperature'],100*sensor_baro_2['pressure']-100*median_pressure,'b')
+    plt.plot(sensor_baro_2['temperature'],sensor_baro_2['pressure']-median_pressure,'b')
    plt.plot(temp_resample,baro_2_x_resample,'r')
    plt.title('Baro 2 ({}) Bias vs Temperature'.format(baro_2_params['TC_B2_ID']))
    plt.ylabel('Z bias (Pa)')
@@ -1838,7 +1838,7 @@ if num_baros >= 4:

    # fit data
    median_pressure = np.median(sensor_baro_3['pressure'])
-    coef_baro_3_x = np.polyfit(temp_rel,100*(sensor_baro_3['pressure']-median_pressure),5) # convert from hPa to Pa
+    coef_baro_3_x = np.polyfit(temp_rel,(sensor_baro_3['pressure']-median_pressure),5) # pressure in Pascal
    baro_3_params['TC_B3_X5'] = coef_baro_3_x[0]
    baro_3_params['TC_B3_X4'] = coef_baro_3_x[1]
    baro_3_params['TC_B3_X3'] = coef_baro_3_x[2]
@@ -1853,7 +1853,7 @@ if num_baros >= 4:
    plt.figure(16,figsize=(20,13))

    # draw plots
-    plt.plot(sensor_baro_3['temperature'],100*sensor_baro_3['pressure']-100*median_pressure,'b')
+    plt.plot(sensor_baro_3['temperature'],sensor_baro_3['pressure']-median_pressure,'b')
    plt.plot(temp_resample,baro_3_x_resample,'r')
    plt.title('Baro 3 ({}) Bias vs Temperature'.format(baro_3_params['TC_B3_ID']))
    plt.ylabel('Z bias (Pa)')
@@ -98,40 +98,6 @@ class firmware(object):

    desc = {}
    image = bytes()
-    crctab = array.array('I', [
-        0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-        0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-        0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-        0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-        0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-        0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-        0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-        0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-        0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-        0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-        0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-        0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-        0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-        0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-        0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-        0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-        0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-        0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-        0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-        0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-        0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-        0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-        0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-        0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-        0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-        0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-        0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-        0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-        0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-        0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-        0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-        0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d])
-    crcpad = bytearray(b'\xff\xff\xff\xff')

    def __init__(self, path):

@@ -149,17 +115,15 @@ class firmware(object):
    def property(self, propname):
        return self.desc[propname]

-    def __crc32(self, bytes, state):
-        for byte in bytes:
-            index = (state ^ byte) & 0xff
-            state = self.crctab[index] ^ (state >> 8)
-        return state
-
    def crc(self, padlen):
-        state = self.__crc32(self.image, int(0))
-        for _ in range(len(self.image), (padlen - 1), 4):
-            state = self.__crc32(self.crcpad, state)
-        return state
+        state = 0xFFFFFFFF
+        state = zlib.crc32(self.image, state)
+        padding_length = padlen - len(self.image)
+        if padding_length > 0:
+            padding = b'\xff' * padding_length
+            state = zlib.crc32(padding, state)
+
+        return (state ^ 0xFFFFFFFF) & 0xFFFFFFFF


 class uploader:
@@ -132,7 +132,6 @@ ENTRY(_stext)
 */
 EXTERN(abort)
 EXTERN(_bootdelay_signature)
-EXTERN(board_get_manifest)

 SECTIONS
 {
@@ -48,7 +48,6 @@ else()
 		i2c.cpp
 		init.c
 		led.c
-		mtd.cpp
 		spi.cpp
 		timer_config.cpp
 		usb.c
@@ -67,7 +67,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -3,19 +3,13 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-# By disabling all 3 INA modules, we use the
-# i2c_launcher instead.
-param set - default SENS_EN_INA238 0
-param set - default SENS_EN_INA228 0
-param set - default SENS_EN_INA226 0
-
 # Mavlink ethernet (CFG 1000)
-param set - default MAV_2_CONFIG 1000
-param set - default MAV_2_BROADCAST 1
-param set - default MAV_2_MODE 0
-param set - default MAV_2_RADIO_CTL 0
-param set - default MAV_2_RATE 100000
-param set - default MAV_2_REMOTE_PRT 14550
-param set - default MAV_2_UDP_PRT 14550
+param set-default MAV_2_CONFIG 1000
+param set-default MAV_2_BROADCAST 1
+param set-default MAV_2_MODE 0
+param set-default MAV_2_RADIO_CTL 0
+param set-default MAV_2_RATE 100000
+param set-default MAV_2_REMOTE_PRT 14550
+param set-default MAV_2_UDP_PRT 14550

 safety_button start
@@ -71,6 +71,5 @@ else()
 			nuttx_arch # sdio
 			nuttx_drivers # sdio
 			px4_layer
-			platform_gpio_mcp23009
 	)
 endif()
@@ -74,7 +74,6 @@
 #include <px4_platform/gpio.h>
 #include <px4_platform/board_determine_hw_info.h>
 #include <px4_platform/board_dma_alloc.h>
-#include <px4_platform/gpio/mcp23009.hpp>

 /****************************************************************************
 * Pre-Processor Definitions
@@ -286,13 +285,6 @@ __EXPORT int board_app_initialize(uintptr_t arg)

 #  endif /* CONFIG_MMCSD */

-	ret = mcp23009_register_gpios(3, 0x25);
-
-	if (ret != OK) {
-		led_on(LED_RED);
-		return ret;
-	}
-
 #endif /* !defined(BOOTLOADER) */

 	return OK;
@@ -47,7 +47,7 @@
 #define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)

 /* Safety LED */
-#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)

 /* Tone alarm output. */
 #define TONE_ALARM_TIMER             2    /* timer 2 */
@@ -35,11 +35,11 @@ CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
 CONFIG_DRIVERS_MAGNETOMETER_LIS3MDL=y
 CONFIG_DRIVERS_MAGNETOMETER_LSM303AGR=y
 CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
-CONFIG_DRIVERS_MAGNETOMETER_MEMSIC_MMC5983MA=y
 CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_POWER_MONITOR_INA228=y
 CONFIG_DRIVERS_POWER_MONITOR_INA238=y
+CONFIG_DRIVERS_PCA9685_PWM_OUT=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_PX4IO=y
 CONFIG_COMMON_RC=y
@@ -72,7 +72,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -14,10 +14,7 @@ param set-default MAV_2_RATE 100000
 param set-default MAV_2_REMOTE_PRT 14550
 param set-default MAV_2_UDP_PRT 14550

-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
 param set-default SENS_EN_INA226 1
-
 param set-default SENS_EN_THERMAL 1
 param set-default SENS_IMU_MODE 1
 param set-default SENS_IMU_TEMP 10.0
@@ -97,5 +97,11 @@ bmm150 -I start
 # Internal Baro on I2C
 bmp388 -I start

+# Start an external PWM generator
+if param greater PCA9685_EN_BUS 0
+then
+	pca9685_pwm_out start
+fi
+
 unset HAVE_PM2
 unset HAVE_PM3
@@ -19,8 +19,17 @@ CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
 CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
 CONFIG_COMMON_LIGHT=y
-CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
+CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
+CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
+CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8308=y
+CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
+CONFIG_DRIVERS_MAGNETOMETER_LIS3MDL=y
+CONFIG_DRIVERS_MAGNETOMETER_LSM303AGR=y
+CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
+CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
 CONFIG_DRIVERS_OSD_MSP_OSD=y
+CONFIG_DRIVERS_PCA9685_PWM_OUT=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_COMMON_RC=y
 CONFIG_DRIVERS_UAVCAN=y
@@ -50,7 +59,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -16,3 +16,9 @@ iis2mdc -R 0 -I -b 4 start

 # Internal Baro on I2C
 bmp388 -I -b 2 start
+
+# Start an external PWM generator
+if param greater PCA9685_EN_BUS 0
+then
+	pca9685_pwm_out start
+fi
@@ -19,6 +19,7 @@ CONFIG_COMMON_LIGHT=y
 CONFIG_DRIVERS_MAGNETOMETER_MEMSIC_MMC5983MA=y
 CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
 CONFIG_DRIVERS_OPTICAL_FLOW_PAW3902=y
+CONFIG_DRIVERS_PCA9685_PWM_OUT=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_COMMON_RC=y
@@ -41,7 +42,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -34,3 +34,9 @@ paw3902 -s -b 3 start -Y 90

 # Internal distance sensor
 afbrs50 start
+
+# Start an external PWM generator
+if param greater PCA9685_EN_BUS 0
+then
+	pca9685_pwm_out start
+fi
@@ -14,6 +14,7 @@ CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_BMI088_ACCELEROMETER_INT2=y
 CONFIG_COMMON_LIGHT=y
@@ -25,7 +26,6 @@ CONFIG_DRIVERS_PCA9685_PWM_OUT=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_POWER_MONITOR_INA228=y
 CONFIG_DRIVERS_POWER_MONITOR_INA238=y
-CONFIG_DRIVERS_ROBOCLAW=y
 CONFIG_DRIVERS_UAVCAN=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
@@ -57,7 +57,6 @@ CONFIG_LOGGER_STACK_SIZE=4100
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -66,9 +65,6 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODE_NAVIGATOR_VTOL_TAKEOFF=y
 CONFIG_MODULES_RC_UPDATE=y
-CONFIG_MODULES_ROVER_ACKERMANN=y
-CONFIG_MODULES_ROVER_DIFFERENTIAL=y
-CONFIG_MODULES_ROVER_MECANUM=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
 CONFIG_MODULES_TIME_PERSISTOR=y
@@ -77,9 +73,7 @@ CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_I2C_LAUNCHER=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
@@ -91,8 +85,6 @@ CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_REBOOT=y
 CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
-CONFIG_SYSTEMCMDS_SERIAL_TEST=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
@@ -3,12 +3,6 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-# By disabling INA modules, we use the
-# i2c_launcher instead.
-param set-default SENS_EN_INA226 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA238 0
-
 # Set the backend of the dataman to SRAM
 param set-default SYS_DM_BACKEND 1
 # Set TELEM1 as default mavlink connection
@@ -19,6 +13,13 @@ param set-default SDLOG_BACKEND 2
 # 200kOhm/10kOhm voltage divider on V_BAT
 param set-default BAT1_V_DIV 21

+# Uncomment to use PWM9 as Analog input
+# param set-default PWM_MAIN_TIM2 -2
+
+# Uncomment to use PWM10 as PPS input
+# param set-default PWM_MAIN_TIM3 -2
+# param set-default PWM_MAIN_FUNC10 2064
+
 # Skynode: use the "custom participant", IP=10.41.10.1 config for uxrce_dds_client
 param set-default UXRCE_DDS_PTCFG 2
 param set-default UXRCE_DDS_AG_IP 170461697
@@ -74,5 +74,5 @@ ist8310 -X -b 1 -R 10 start
 # Start an external PWM generator
 if param greater PCA9685_EN_BUS 0
 then
-	pca9685_pwm_out start -b 1
+	pca9685_pwm_out start
 fi
@@ -238,9 +238,12 @@ CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
 CONFIG_STM32H7_SPI4=y
 CONFIG_STM32H7_SPI4_DMA=y
 CONFIG_STM32H7_SPI4_DMA_BUFFER=4096
-CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM2=y
 CONFIG_STM32H7_TIM3=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM5=y
+CONFIG_STM32H7_TIM8=y
 CONFIG_STM32H7_UART4=y
 CONFIG_STM32H7_UART5=y
 CONFIG_STM32H7_UART7=y
@@ -135,15 +135,14 @@


 /* PWM Timers */
-#define BOARD_NUM_IO_TIMERS 2
-#define DIRECT_PWM_OUTPUT_CHANNELS   8
+/* 3 for PWM outputs, 1 for input capture */
+#define BOARD_NUM_IO_TIMERS 4
+/* 9 for PWM outputs, 1 for input capture */
+#define DIRECT_PWM_OUTPUT_CHANNELS 10

 /* High-resolution timer */
-#define HRT_TIMER               8  /* use timer8 for the HRT */
-#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
-
-#define HRT_PPM_CHANNEL         /* T8C2 */  2  /* use capture/compare channel 1 */
-#define GPIO_PPM_IN             /* PC7  */ GPIO_TIM8_CH2IN_1
+#define HRT_TIMER               4  /* use timer4 for the HRT */
+#define HRT_TIMER_CHANNEL       1  /* use capture/compare channel 1 */

 /* This board provides a DMA pool and APIs */
 #define BOARD_DMA_ALLOC_POOL_SIZE 5120
@@ -44,11 +44,17 @@
 * TIM3_CH2  T FMU_CH6
 * TIM3_CH3  T FMU_CH7
 * TIM3_CH4  T FMU_CH8
+ *
+ * TIM5_CH1  T FMU_CH9
+ *
+ * TIM8_CH2  T FMU_CAP1 < Input Capture
 */

 constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
 	initIOTimer(Timer::Timer1, DMA{DMA::Index1}),
 	initIOTimer(Timer::Timer3, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer5),
+	initIOTimer(Timer::Timer8),
 };

 constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
@@ -60,6 +66,8 @@ constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
 	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel2}, {GPIO::PortB, GPIO::Pin5}),
 	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
 	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortC, GPIO::Pin9}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer8, Timer::Channel2}, {GPIO::PortC, GPIO::Pin7}),
 };

 constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
@@ -20,6 +20,7 @@ CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPIO_MCP23009=y
 CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
@@ -3,12 +3,6 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-# By disabling all 3 INA modules, we use the
-# i2c_launcher instead.
-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 # Skynode: use the "custom participant", IP=10.41.10.1 config for uxrce_dds_client
 param set-default UXRCE_DDS_PTCFG 2
 param set-default UXRCE_DDS_AG_IP 170461697
@@ -26,9 +20,9 @@ safety_button start
 if ver hwbasecmp 009 010 011
 then
 	# No USB
-	mcp23009 start -b 3 -X -D 0xf0 -O 0xf0 -P 0x0f -U 10
+	mcp23009 start -b 3 -X -D 0xf0 -O 0xf0 -P 0x0f -M 0 -U 10
 fi
 if ver hwbasecmp 00a 008
 then
-	mcp23009 start -b 3 -X -D 0xf1 -O 0xf0 -P 0x0f -U 10
+	mcp23009 start -b 3 -X -D 0xf1 -O 0xf0 -P 0x0f -M 0 -U 10
 fi
@@ -86,8 +86,5 @@ fi
 #external baro
 bmp388 -X start

-# Don't try to start external baro on I2C3 as it can conflict with the MS5525DSO airspeed sensor.
-#ms5611 -X start
-
 unset INA_CONFIGURED
 unset HAVE_PM2
@@ -69,6 +69,6 @@ else()
 			nuttx_arch # sdio
 			nuttx_drivers # sdio
 			px4_layer
-			platform_gpio_mcp23009
+			platform_gpio_mcp
 	)
 endif()
@@ -471,7 +471,7 @@
 #define PX4_I2C_BUS_MTD      4,5


-#define BOARD_NUM_IO_TIMERS 5
+#define BOARD_NUM_IO_TIMERS 4

 /* No CDCACM driver for this board, so this is manually defined for version.c
 * so that the px4_board_version reports the correct board id to the companion */
@@ -74,7 +74,6 @@
 #include <px4_platform/gpio.h>
 #include <px4_platform/board_determine_hw_info.h>
 #include <px4_platform/board_dma_alloc.h>
-#include <px4_platform/gpio/mcp23009.hpp>

 /****************************************************************************
 * Pre-Processor Definitions
@@ -282,13 +281,6 @@ __EXPORT int board_app_initialize(uintptr_t arg)

 #  endif /* CONFIG_MMCSD */

-	ret = mcp23009_register_gpios(3, 0x25);
-
-	if (ret != OK) {
-		led_on(LED_RED);
-		return ret;
-	}
-
 #endif /* !defined(BOOTLOADER) */

 	return OK;
@@ -50,8 +50,6 @@
 * TIM1_CH3  T SPI2_DRDY2_ISM330_INT2 < Capture or GPIO INT
 * TIM1_CH1  T SPIX_SYNC              > Pulse or GPIO strobe
 *
- * TIM2_CH3  T HEATER                 > PWM OUT or GPIO
- *
 * TIM14_CH1 T BUZZER_1              - Driven by other driver
 * TIM8_CH1_IN T FMU_PPM_INPUT       - Sampled byt HRT by other driver
 */
@@ -61,7 +59,6 @@ constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
 	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
 	initIOTimer(Timer::Timer12),
 	initIOTimer(Timer::Timer1),
-	initIOTimer(Timer::Timer2),
 };

 constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
@@ -14,6 +14,7 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
+CONFIG_DRIVERS_LINUX_PWM_OUT=y
 CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
 CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
@@ -30,8 +31,8 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_MODE_MANAGER=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
@@ -11,3 +11,7 @@ param set BAT1_V_DIV 5.7

 # Always keep current config
 param set SYS_AUTOCONFIG 0
+
+# PCA9685 PWM Out defaults
+param set-default PCA9685_EN_BUS 4
+param set-default PCA9685_I2C_ADDR 64
@@ -28,7 +28,7 @@ then
 	echo "ads1115 not found."
 fi

-if ! pca9685_pwm_out start -a 0x40 -b 4
+if ! pca9685_pwm_out start
 then
 	echo "pca9685_pwm_out not found."
 fi
@@ -61,7 +61,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -3,13 +3,6 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-# By disabling all 3 INA modules, we use the
-# i2c_launcher instead.
-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
-
 # Mavlink ethernet (CFG 1000)
 param set-default MAV_2_CONFIG 1000
 param set-default MAV_2_BROADCAST 1
@@ -68,7 +68,7 @@ fi

 bmi088 -A -R 4 -s start
 bmi088 -G -R 4 -s start
-iim42652 -R 6 -s start
+iim42652 -R 6 -s -C 32768 start
 icm45686 -R 2 -s start

 rm3100 -I -b 4 start
@@ -71,6 +71,5 @@ else()
 			nuttx_arch # sdio
 			nuttx_drivers # sdio
 			px4_layer
-			platform_gpio_mcp23009
 	)
 endif()
@@ -74,7 +74,6 @@
 #include <px4_platform/gpio.h>
 #include <px4_platform/board_determine_hw_info.h>
 #include <px4_platform/board_dma_alloc.h>
-#include <px4_platform/gpio/mcp23009.hpp>

 /****************************************************************************
 * Pre-Processor Definitions
@@ -286,13 +285,6 @@ __EXPORT int board_app_initialize(uintptr_t arg)

 #  endif /* CONFIG_MMCSD */

-	ret = mcp23009_register_gpios(3, 0x25);
-
-	if (ret != OK) {
-		led_on(LED_RED);
-		return ret;
-	}
-
 #endif /* !defined(BOOTLOADER) */

 	return OK;
@@ -15,10 +15,6 @@ param set-default MAV_2_UDP_PRT 14550
 param set-default BAT1_V_DIV 18
 param set-default BAT1_A_PER_V 24

-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 param set-default USB_MAV_MODE 5

 param set-default UAVCAN_SUB_GPS 1
@@ -13,7 +13,7 @@ CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/narinfc/h7/nuttx-config"
 CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
-CONFIG_ARCH_BOARD_CUSTOM_NAME="PX4 NarinFC-H7"
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
 CONFIG_ARCH_CHIP="stm32h7"
 CONFIG_ARCH_CHIP_STM32H743XI=y
 CONFIG_ARCH_CHIP_STM32H7=y
@@ -31,11 +31,11 @@ CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x004c
-CONFIG_CDCACM_PRODUCTSTR="PX4 BL NarinFC H7"
+CONFIG_CDCACM_PRODUCTID=0x0047
+CONFIG_CDCACM_PRODUCTSTR="PX4 BL VOLOLAND NarinFC-H7"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
-CONFIG_CDCACM_VENDORID=0x3163
+CONFIG_CDCACM_VENDORID=0x3fc5
 CONFIG_CDCACM_VENDORSTR="VOLOLAND"
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -12,10 +12,6 @@ param set-default MAV_2_RATE 100000
 param set-default MAV_2_REMOTE_PRT 14550
 param set-default MAV_2_UDP_PRT 14550

-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 param set-default RC_CRSF_PRT_CFG 300
 param set-default RC_CRSF_TEL_EN 1
 param set-default RC_SBUS_PRT_CFG 0
@@ -12,10 +12,6 @@ param set-default MAV_2_RATE 100000
 param set-default MAV_2_REMOTE_PRT 14550
 param set-default MAV_2_UDP_PRT 14550

-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 param set-default BAT1_V_DIV 18.000000000
 param set-default BAT1_A_PER_V 38.462030303

@@ -74,7 +74,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -3,10 +3,6 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 if ver hwbasecmp 008 009 00a 010 011
 then
 	# Skynode: use the "custom participant", IP=10.41.10.1 config for uxrce_dds_client
@@ -33,9 +29,9 @@ safety_button start
 if ver hwbasecmp 009
 then
 	# No USB
-	mcp23009 start -b 3 -X -D 0xf0 -O 0xf0 -P 0x0f -U 10
+	mcp23009 start -b 3 -X -D 0xf0 -O 0xf0 -P 0x0f -M 0 -U 10
 fi
 if ver hwbasecmp 00a 008
 then
-	mcp23009 start -b 3 -X -D 0xf1 -O 0xf0 -P 0x0f -U 10
+	mcp23009 start -b 3 -X -D 0xf1 -O 0xf0 -P 0x0f -M 0 -U 10
 fi
@@ -43,8 +43,6 @@ add_library(drivers_board
 	usb.c
 )

-add_dependencies(drivers_board platform_gpio_mcp23009)
-
 target_link_libraries(drivers_board
 	PRIVATE
 		arch_io_pins
@@ -54,5 +52,5 @@ target_link_libraries(drivers_board
 		nuttx_arch # sdio
 		nuttx_drivers # sdio
 		px4_layer
-		platform_gpio_mcp23009
+		platform_gpio_mcp
 )
@@ -74,7 +74,6 @@
 #include <px4_platform/gpio.h>
 #include <px4_platform/board_determine_hw_info.h>
 #include <px4_platform/board_dma_alloc.h>
-#include <px4_platform/gpio/mcp23009.hpp>

 /****************************************************************************
 * Pre-Processor Definitions
@@ -280,12 +279,5 @@ __EXPORT int board_app_initialize(uintptr_t arg)

 #endif /* CONFIG_MMCSD */

-	ret = mcp23009_register_gpios(3, 0x25);
-
-	if (ret != OK) {
-		led_on(LED_RED);
-		return ret;
-	}
-
 	return OK;
 }
@@ -20,7 +20,6 @@ CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
-CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
@@ -12,7 +12,6 @@ CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
-CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_DRIVERS_CDCACM_AUTOSTART=y
@@ -71,7 +70,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -3,12 +3,6 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-# By disabling all 3 INA modules, we use the
-# i2c_launcher instead.
-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 # Mavlink ethernet (CFG 1000)
 param set-default MAV_2_CONFIG 1000
 param set-default MAV_2_BROADCAST 1
@@ -146,8 +146,5 @@ else
 	bmp388 -X start
 fi

-# Don't try to start external baro on I2C3 as it can conflict with the MS5525DSO airspeed sensor.
-#ms5611 -X start
-
 unset INA_CONFIGURED
 unset HAVE_PM2
@@ -0,0 +1,2 @@
+CONFIG_MAVLINK_DIALECT="development"
+CONFIG_MODULES_UXRCE_DDS_CLIENT=n
@@ -1,4 +1,5 @@
 # CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE is not set
 CONFIG_DRIVERS_UAVCAN=n
 CONFIG_MODULES_UXRCE_DDS_CLIENT=n
+CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_MODULES_ZENOH=y
@@ -47,6 +47,7 @@ CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_INTERFACES=3
 CONFIG_COMMON_UWB=y
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
 CONFIG_MODULES_BATTERY_STATUS=y
@@ -12,12 +12,6 @@ param set-default MAV_2_RATE 100000
 param set-default MAV_2_REMOTE_PRT 14550
 param set-default MAV_2_UDP_PRT 14550

-# By disabling all 3 INA modules, we use the
-# i2c_launcher instead.
-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 safety_button start

 if param greater -s UAVCAN_ENABLE 0
@@ -54,6 +54,7 @@ CONFIG_DEBUG_MEMFAULT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEBUG_TCBINFO=y
 CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_GPIO=y
 CONFIG_DEV_PIPE_SIZE=70
 CONFIG_DEV_URANDOM=y
 CONFIG_ETH0_PHY_MULTI=y
@@ -35,7 +35,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -0,0 +1 @@
+CONFIG_MAVLINK_DIALECT="development"
@@ -34,7 +34,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -63,7 +63,6 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
-CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
@@ -3,12 +3,6 @@
 # board specific defaults
 #------------------------------------------------------------------------------

-# By disabling all 3 INA modules, we use the
-# i2c_launcher instead.
-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 0
-
 # Mavlink ethernet (CFG 1000)
 param set-default MAV_2_CONFIG 1000
 param set-default MAV_2_BROADCAST 1
@@ -0,0 +1,34 @@
+############################################################################
+#
+#   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+add_subdirectory(pwm_voltage)
@@ -0,0 +1,4 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_ARCH_CHIP_STM32H7=y
@@ -0,0 +1,92 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
+CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
+CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_BAROMETER_GOERTEK_SPL06=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_DRIVERS_DISTANCE_SENSOR_TF02PRO=y
+CONFIG_DRIVERS_DISTANCE_SENSOR_TFMINI=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_BOSCH_BMI270=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
+CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_COMMON_OSD=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_PX4IO=y
+CONFIG_COMMON_RC=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=4
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_MODE_MANAGER=y
+CONFIG_MODULES_FW_RATE_CONTROL=y
+CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_GPIO=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_MTD=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y
+CONFIG_EXAMPLES_FAKE_GPS=y
+CONFIG_ARCH_CHIP_STM32H7=y
@@ -0,0 +1,13 @@
+{
+    "board_id": 1203,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the AP-H743r1 board",
+    "image": "",
+    "build_time": 0,
+    "summary": "AP-H743r1",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1966080,
+    "git_identity": "",
+    "board_revision": 0
+}
@@ -0,0 +1,29 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+param set-default BAT1_A_PER_V 17
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_V_CHARGED 4.2
+param set-default BAT1_V_DIV 10.1
+param set-default BAT1_V_EMPTY 3.2
+
+param set-default SYS_HAS_MAG 1
+param set-default PWM_MAIN_TIM0 -4
+param set-default RC_INPUT_PROTO -1
+
+param set-default IMU_GYRO_RATEMAX 2000
+param set-default SYS_AUTOSTART 4001
+param set-default MC_PITCHRATE_K 0.4
+param set-default MC_ROLLRATE_K 0.35
+param set-default MC_YAWRATE_K 1.2
+param set-default MC_YAWRATE_MAX 360
+param set-default MAV_TYPE 2
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 4
+param set-default CBRK_SUPPLY_CHK 894281
+
+param set-default USB_MAV_MODE 5
+
+# pwm voltage 3.3V/5V switch
+pwm_voltage_apply start
@@ -0,0 +1,4 @@
+#!/bin/sh
+#
+# board specific extras init
+#------------------------------------------------------------------------------
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# board specific sensors init
+#------------------------------------------------------------------------------
+
+board_adc start
+
+# IMU
+if ! icm42688p -s -b 1 -R 4 start
+then
+	bmi270 -s -b 1 -R 4 start
+fi
+
+if ! icm42688p -s -b 4 -R 4 start
+then
+	bmi270 -s -b 4 -R 4 start
+fi
+
+# baro
+if ! dps310 -I start -a 0x76
+then
+	spl06 -I  start -a 0x76
+fi
+
+# internal mag
+ist8310 -I -R 6 start
@@ -0,0 +1,17 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+config BOARD_HAS_PROBES
+	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
+	default y
+	---help---
+		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
+
+config BOARD_USE_PROBES
+	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
+	default n
+	depends on BOARD_HAS_PROBES
+
+	---help---
+		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.
@@ -0,0 +1,90 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/x-mav/ap-h743r1/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0036
+CONFIG_CDCACM_PRODUCTSTR="X-MAV AP-H743r1 Bootloader"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x1B8C
+CONFIG_CDCACM_VENDORSTR="X-MAV"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_USART6=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=300
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
@@ -0,0 +1,442 @@
+/************************************************************************************
+ * nuttx-configs/px4_fmu-v6u/include/board.h
+ *
+ *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
+ *   Authors: David Sidrane <david.sidrane@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#ifndef __NUTTX_CONFIG_APH743R1_INCLUDE_BOARD_H
+#define __NUTTX_CONFIG_APH743R1_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The AP-H743 R1  board provides the following clock sources:
+ *
+ *   X1: 8 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 16 MHz RC factory-trimmed
+ *   HSE: 16 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 16,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+#define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(120)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 120)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(2)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(2)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* FDCAN 1 clock source */
+
+// #define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
+ * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The board has two, LED_GREEN a Green LED and LED_BLUE a Blue LED,
+ * that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_LED3        2
+#define BOARD_NLEDS       3
+
+#define BOARD_LED_RED     BOARD_LED1
+#define BOARD_LED_GREEN   BOARD_LED2
+#define BOARD_LED_BLUE    BOARD_LED3
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_2     	/* PA10 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_2      	/* PA9 */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_2       /* PD6 */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2       /* PD5 */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   	/* PD9 */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   	/* PD8 */
+
+#define GPIO_UART4_RX    GPIO_UART4_RX_3    	/* PB8 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_3    	/* PB9 */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   	/* PC7 */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   	/* PC6 */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_3    	/* PE7 */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    	/* PE8 */
+
+#define GPIO_UART8_RX    GPIO_UART8_RX_1    	/* PE0 */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1    	/* PE1 */
+
+/* SPI
+ *
+ */
+#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
+
+#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1               /* PA7  */
+#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5 */
+
+#define GPIO_SPI3_MISO   GPIO_SPI3_MISO_2               /* PC11 */
+#define GPIO_SPI3_MOSI   GPIO_SPI3_MOSI_2               /* PC12 */
+#define GPIO_SPI3_SCK    ADJ_SLEW_RATE(GPIO_SPI3_SCK_2) /* PC10 */
+
+#define GPIO_SPI4_MISO   GPIO_SPI4_MISO_2               /* PE5 */
+#define GPIO_SPI4_MOSI   GPIO_SPI4_MOSI_2               /* PE6  */
+#define GPIO_SPI4_SCK    ADJ_SLEW_RATE(GPIO_SPI4_SCK_2) /* PE2 */
+
+/* I2C
+ *
+ */
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1       /* PB6  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10  */
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11  */
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
+
+
+#define GPIO_I2C4_SCL GPIO_I2C4_SCL_1       /* PD12 */
+#define GPIO_I2C4_SDA GPIO_I2C4_SDA_1       /* PD13 */
+
+#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN12)
+#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_2MHz | GPIO_OUTPUT_SET | GPIO_PORTD | GPIO_PIN13)
+
+#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
+#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1  */
+
+#define GPIO_CAN2_RX     GPIO_CAN2_RX_1        /* PB12 */
+#define GPIO_CAN2_TX     GPIO_CAN2_TX_1        /* PB13 */
+
+/* SDMMC2
+ *
+ *      VDD 3.3
+ *      GND
+ *      SDMMC2_CK                           PD6
+ *      SDMMC2_CMD                          PD7
+ *      SDMMC2_D0                           PB14
+ *      SDMMC2_D1                           PB15
+ *      SDMMC2_D2                           PG11
+ *      SDMMC2_D3                           PB4
+ */
+
+#define GPIO_SDMMC2_CK   GPIO_SDMMC2_CK_2  /* PC1 */
+#define GPIO_SDMMC2_CMD  GPIO_SDMMC2_CMD_1 /* PD7 */
+// #define GPIO_SDMMC2_D0   GPIO_SDMMC2_D0    /* PB14 */
+// #define GPIO_SDMMC2_D1   GPIO_SDMMC2_D1    /* PB15 */
+#define GPIO_SDMMC2_D2   GPIO_SDMMC2_D2_2  /* PB3 */
+// #define GPIO_SDMMC2_D3   GPIO_SDMMC2_D3    /* PB4 */
+
+
+#endif  /*__NUTTX_CONFIG_APH743R1_INCLUDE_BOARD_H  */
@@ -0,0 +1,61 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0		/* 1 DMA1:37 IMU */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0		/* 2 DMA1:38 IMU */
+
+#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0		/* DMA1:39 */
+#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0 	/* DMA1:40 */
+
+#define DMAMAP_SPI4_RX    DMAMAP_DMA12_SPI4RX_0		/* 3 DMA1:83 IMU */
+#define DMAMAP_SPI4_TX    DMAMAP_DMA12_SPI4TX_0		/* 4 DMA1:84 IMU */
+
+#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0	/*  DMA1:41  GPS1 */
+#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0	/*  DMA1:42  GPS1 */
+
+#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_0	/*  DMA1:43 GPS2 */
+#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0	/*  DMA1:44 GPS2 */
+
+#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0	/*  DMA1:45 TELEM1 */
+#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0	/*  DMA1:46 TELEM1 */
+
+#define DMAMAP_UART4_RX    DMAMAP_DMA12_UART4RX_1	/*  DMA1:63 TELEM2 */
+#define DMAMAP_UART4_TX    DMAMAP_DMA12_UART4TX_1	/*  DMA1:64 TELEM2 */
+
+#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0	/*  DMA1:71 PX4IO */
+#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0	/*  DMA1:72 PX4IO */
--- a/Show More
+++ b/Show More