Delete simpleapp CMakeLists

uavcannode: Add CANNODE_TERM parameter (configure CAN termination on ARK cannodes)
- adds functionality to enable the built in can termination on the ARK cannodes
2026-05-30 00:40:05 +08:00 · 2021-10-18 08:33:52 +11:00 · 2021-10-15 09:29:56 -04:00 · 2021-10-15 05:54:27 -07:00 · 2021-10-15 09:58:48 +02:00 · 2021-10-15 09:58:48 +02:00
752 changed files with 10136 additions and 14338 deletions
@@ -84,16 +84,11 @@ pipeline {
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
-                     "px4_fmu-v4_cannode",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
                     "px4_fmu-v5_ctrlalloc",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
-                     "px4_fmu-v5_fixedwing",
-                     "px4_fmu-v5_multicopter",
-                     "px4_fmu-v5_optimized",
-                     "px4_fmu-v5_rover",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
@@ -394,7 +394,7 @@ pipeline {
                  steps {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+                    //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb_tests latency_test" || true'
                  }
@@ -427,74 +427,6 @@ pipeline {
          }
        }

-        stage("px4_fmu-v5_optimized") {
-          stages {
-            stage("build px4_fmu-v5_optimized") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2021-09-08'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v5_optimized'
-                sh 'make px4_fmu-v5_optimized bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_optimized'
-              }
-              post {
-                always {
-                    sh 'make distclean'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v5'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_optimized'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_optimized/px4_fmu-v5_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_optimized/px4_fmu-v5_optimized.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                    resetBoard()
-                }
-              }
-            } // stage test
-          }
-        }
-
        stage("px4_fmu-v5_stackcheck") {
          stages {
            stage("build px4_fmu-v5_stackcheck") {
@@ -802,12 +734,26 @@ void checkoutSCM() {
 }

 void quickCalibrate() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick; sleep 1; param show CAL_ACC*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro; sleep 1; param show CAL_GYRO*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level; sleep 1; param show SENS_BOARD*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick; sleep 1; param show CAL_MAG*"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status; param show CAL_GYRO*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters before
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gyro_calibration status || true"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate accel quick"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_ACC*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate gyro"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_GYRO*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate level"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SENS*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander calibrate mag quick"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_MAG*"'
+
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CAL_*"' // parameters after
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
 }

 void checkStatus() {
@@ -897,8 +843,9 @@ void runTests() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u"'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
+  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'

+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander stop"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'

@@ -82,6 +82,7 @@ Checks:          '*,
                  -modernize-use-equals-delete,
                  -modernize-use-override,
                  -modernize-use-using,
+                  -modernize-use-trailing-return-type,
                  -performance-inefficient-string-concatenation,
                  -readability-avoid-const-params-in-decls,
                  -readability-container-size-empty,
@@ -36,27 +36,6 @@ jobs:
      with:
        token: ${{ secrets.ACCESS_TOKEN }}

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: tests_${{matrix.ubuntu_release}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: tests_${{matrix.ubuntu_release}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
    - name: check environment
      run: |
          export
@@ -17,30 +17,5 @@ jobs:
      with:
        token: ${{secrets.ACCESS_TOKEN}}

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: clang-tidy-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: clang-tidy-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
    - name: make clang-tidy-quiet
-      run: |
-        ccache -z
-        make clang-tidy-quiet
-        ccache -s
+      run: make clang-tidy-quiet
@@ -42,8 +42,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -39,8 +39,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -43,8 +43,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 40M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -80,13 +80,15 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

    - name: make all_variants_${{matrix.config}}
      run: make all_variants_${{matrix.config}}
+      timeout-minutes: 45
    - name: make ${{matrix.config}} bloaty_compileunits
      run: make ${{matrix.config}} bloaty_compileunits || true
    - name: make ${{matrix.config}} bloaty_inlines
@@ -108,4 +110,6 @@ jobs:
      uses: actions/upload-artifact@v2
      with:
        name: px4_package_${{matrix.config}}
-        path: build/**/*.px4
+        path: |
+          build/**/*.px4
+          build/**/*.bin
@@ -1,64 +0,0 @@
-name: NuttX UAVCAN firmware
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-09-08
-    strategy:
-      matrix:
-        config: [
-          ark_can-flow_default,
-          ark_can-gps_default,
-          ark_can-rtk-gps_default,
-          cuav_can-gps-v1_default,
-          freefly_can-rtk-gps_default,
-          holybro_can-gps-v1_default,
-          nxp_ucans32k146_default,
-          px4_fmu-v4_cannode
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-
-    - name: ccache post-run
-      run: ccache -s
-
-    - name: Upload px4 package
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_cannode_${{matrix.config}}
-        path: build/${{matrix.config}}/*.uavcan.bin
@@ -29,32 +29,8 @@ jobs:
      with:
        token: ${{secrets.ACCESS_TOKEN}}

-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.target}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.target}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
    - name: make ${{matrix.target}}
      run: make ${{matrix.target}}
-    - name: ccache post-run
-      run: ccache -s

    - name: parameter & events metadata
      run: |
@@ -49,8 +49,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -78,6 +79,7 @@ jobs:
      run: |
        export
        ./test/rostest_px4_run.sh mavros_posix_test_mission.test mission:=${{matrix.config.mission}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45

    - name: Look at core files
      if: failure()
@@ -44,8 +44,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -73,6 +74,7 @@ jobs:
      run: |
        export
        ./test/rostest_px4_run.sh ${{matrix.config.test_file}} vehicle:=${{matrix.config.vehicle}}
+      timeout-minutes: 45

    - name: Look at core files
      if: failure()
@@ -50,8 +50,9 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -96,6 +97,7 @@ jobs:
        PX4_HOME_ALT: ${{matrix.config.altitude}}
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json
+      timeout-minutes: 45

    - name: Look at core files
      if: failure()
@@ -143,12 +143,33 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
 include(px4_add_module)
 set(config_module_list)

+# Find Python
+# If using catkin, Python 2 is found since it points
+# to the Python libs installed with the ROS distro
+if (NOT CATKIN_DEVEL_PREFIX)
+	find_package(PythonInterp 3)
+	# We have a custom error message to tell users how to install python3.
+	if (NOT PYTHONINTERP_FOUND)
+		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+			"    macOS: brew install python")
+	endif()
+else()
+	find_package(PythonInterp REQUIRED)
+endif()
+
+option(PYTHON_COVERAGE "Python code coverage" OFF)
+if(PYTHON_COVERAGE)
+	message(STATUS "python coverage enabled")
+	set(PYTHON_EXECUTABLE coverage run -p)
+endif()
+
 include(px4_config)
-include(px4_add_board)
-include(${PX4_CONFIG_FILE})
+include(kconfig)
 message(STATUS "PX4 config: ${PX4_CONFIG}")
 message(STATUS "PX4 platform: ${PX4_PLATFORM}")

+
 if(${PX4_PLATFORM} STREQUAL "posix")
 	if(ENABLE_LOCKSTEP_SCHEDULER)
 		add_definitions(-DENABLE_LOCKSTEP_SCHEDULER)
@@ -283,27 +304,6 @@ if (CATKIN_DEVEL_PREFIX)
 	endif()
 endif()

-# Python
-# If using catkin, Python 2 is found since it points
-# to the Python libs installed with the ROS distro
-if (NOT CATKIN_DEVEL_PREFIX)
-	find_package(PythonInterp 3)
-	# We have a custom error message to tell users how to install python3.
-	if (NOT PYTHONINTERP_FOUND)
-		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-			"    macOS: brew install python")
-	endif()
-else()
-	find_package(PythonInterp REQUIRED)
-endif()
-
-option(PYTHON_COVERAGE "Python code coverage" OFF)
-if(PYTHON_COVERAGE)
-	message(STATUS "python coverage enabled")
-	set(PYTHON_EXECUTABLE coverage run -p)
-endif()
-
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -15,7 +15,7 @@ pipeline {
        // stage('Catkin build on ROS workspace') {
        //   agent {
        //     docker {
-        //       image 'px4io/px4-dev-ros-melodic:2021-05-04'
+        //       image 'px4io/px4-dev-ros-melodic:2021-08-18'
        //       args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
        //     }
        //   }
@@ -56,7 +56,7 @@ pipeline {
        stage('Colcon build on ROS2 workspace') {
          agent {
            docker {
-              image 'px4io/px4-dev-ros2-foxy:2021-05-04'
+              image 'px4io/px4-dev-ros2-foxy:2021-08-18'
              args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw -e HOME=$WORKSPACE'
            }
          }
@@ -85,7 +85,7 @@ pipeline {

        stage('Airframe') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh 'make distclean'
@@ -105,7 +105,7 @@ pipeline {

        stage('Parameter') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh 'make distclean'
@@ -125,7 +125,7 @@ pipeline {

        stage('Module') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh 'make distclean'
@@ -145,7 +145,7 @@ pipeline {

        stage('msg file docs') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh 'mkdir -p build/msg_docs; ./msg/tools/generate_msg_docs.py -d build/msg_docs'
@@ -164,7 +164,7 @@ pipeline {
        stage('uORB graphs') {
          agent {
            docker {
-              image 'px4io/px4-dev-nuttx-focal:2021-05-04'
+              image 'px4io/px4-dev-nuttx-focal:2021-08-18'
              args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
            }
          }
@@ -194,7 +194,7 @@ pipeline {

        stage('Userguide') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -228,7 +228,7 @@ pipeline {

        stage('QGroundControl') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -256,7 +256,7 @@ pipeline {

        stage('microRTPS agent') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -286,7 +286,7 @@ pipeline {

        stage('PX4 ROS msgs') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -315,7 +315,7 @@ pipeline {

        stage('PX4 ROS2 bridge') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -358,7 +358,7 @@ pipeline {

        stage('S3') {
          agent {
-            docker { image 'px4io/px4-dev-base-focal:2021-05-04' }
+            docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
          }
          steps {
            sh('export')
@@ -0,0 +1,179 @@
+# PX4 Firmware Configuration
+
+
+mainmenu "PX4 Firmware Configuration"
+
+comment "Vendor: $(VENDOR)"
+comment "Model: $(MODEL)"
+comment "Label: $(LABEL)"
+
+menu "Toolchain"
+    choice
+        prompt "Platform"
+        default PLATFORM_NUTTX
+        config PLATFORM_NUTTX
+            bool "nuttx"
+        config PLATFORM_POSIX
+            bool "posix"
+        config PLATFORM_QURT
+            bool "qurt"
+    endchoice
+
+    config BOARD_PLATFORM
+        string
+        default "nuttx" if PLATFORM_NUTTX
+        default "posix" if PLATFORM_POSIX
+        default "qurt" if PLATFORM_QURT
+
+    config BOARD_LOCKSTEP
+        bool "Force enable lockstep"
+        depends on PLATFORM_POSIX
+        help
+            forces lockstep behaviour, despite REPLAY env variable
+
+    config BOARD_NOLOCKSTEP
+        bool "Force disable lockstep"
+        depends on PLATFORM_POSIX
+        help
+            forces nolockstep behaviour, despite REPLAY env variable
+
+    config BOARD_LINUX
+        bool "Linux OS"
+        depends on PLATFORM_POSIX
+        help
+            Board Platform is running the Linux operating system
+
+    config BOARD_TOOLCHAIN
+        string "Toolchain"
+        default ""
+
+    config BOARD_ARCHITECTURE
+        string "Architecture"
+        default ""
+
+    config BOARD_FULL_OPTIMIZATION
+        bool "Full optmization (O3)"
+        default n
+        help
+            Enables Cmake Release for -O3 optimization
+
+    config BOARD_ROMFSROOT
+        string "ROMFSROOT"
+        default "px4fmu_common"
+        help
+            relative path to the ROMFS root directory
+
+    config BOARD_BUILD_BOOTLOADER
+        bool "Enable bootloader"
+        help
+            flag to enable building and including the bootloader config
+
+    config BOARD_IO
+        string "IO board name"
+        help
+            name of IO board to be built and included in the ROMFS (requires a valid ROMFSROOT)
+
+    config BOARD_CONSTRAINED_FLASH
+        bool "Contrained flash"
+        help
+            flag to enable constrained flash options (eg limit init script status text)
+
+    config BOARD_NO_HELP
+        bool "No help"
+        help
+            optional condition flag to disable help text on constrained flash systems
+
+    config BOARD_CONSTRAINED_MEMORY
+        bool "Contrained memory"
+        help
+            flag to enable constrained memory options (eg limit maximum number of uORB publications)
+
+    config BOARD_EXTERNAL_METADATA
+        bool "External metadata"
+        help
+            flag to exclude metadata to reduce flash
+
+    config BOARD_LINKER_PREFIX
+        string "linker prefix"
+        help
+            optional to prefix on the Linker script.
+
+    config BOARD_COMPILE_DEFINITIONS
+        string "add custom compile definitions"
+        help
+            add custom compile defitions to this specific target
+endmenu #Toolchain
+
+config BOARD_TESTING
+    bool "Testing"
+    select SYSTEMCMDS_TESTS
+    help
+        flag to enable automatic inclusion of PX4 testing modules
+
+
+config BOARD_ETHERNET
+    bool "Ethernet"
+    help
+        flag to indicate that ethernet is enabled
+
+config BOARD_CRYPTO
+    string "Crypto"
+    help
+        Crypto implementation selection
+
+config BOARD_KEYSTORE
+    string "Keystore"
+    help
+        Keystore implememntation selection
+
+menu "Serial ports"
+
+    config BOARD_SERIAL_GPS1
+        string "GPS1 tty port"
+
+    config BOARD_SERIAL_GPS2
+        string "GPS2 tty port"
+
+    config BOARD_SERIAL_GPS3
+        string "GPS3 tty port"
+
+    config BOARD_SERIAL_GPS4
+        string "GPS4 tty port"
+
+    config BOARD_SERIAL_GPS5
+        string "GPS5 tty port"
+
+    config BOARD_SERIAL_TEL1
+        string "TEL1 tty port"
+
+    config BOARD_SERIAL_TEL2
+        string "TEL2 tty port"
+
+    config BOARD_SERIAL_TEL3
+        string "TEL3 tty port"
+
+    config BOARD_SERIAL_TEL4
+        string "TEL4 tty port"
+
+    config BOARD_SERIAL_TEL5
+        string "TEL5 tty port"
+
+    config BOARD_SERIAL_WIFI
+        string "WIFI tty port"
+endmenu
+
+menu "drivers"
+source "src/drivers/Kconfig"
+endmenu
+
+menu "modules"
+source "src/modules/Kconfig"
+endmenu
+
+menu "systemcmds"
+source "src/systemcmds/Kconfig"
+endmenu
+
+menu "examples"
+source "src/examples/Kconfig"
+endmenu
@@ -213,8 +213,8 @@ define colorecho
 +@echo -e '${COLOR_BLUE}${1} ${NO_COLOR}'
 endef

-# Get a list of all config targets boards/*/*.cmake
-ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.cmake' -print | sed -e 's|boards\/||' | sed -e 's|\.cmake||' | sed -e 's|\/|_|g' | sort)
+# Get a list of all config targets boards/*/*.px4board
+ALL_CONFIG_TARGETS := $(shell find boards -maxdepth 3 -mindepth 3 -name '*.px4board' -print | sed -e 's|boards\/||' | sed -e 's|\.px4board||' | sed -e 's|\/|_|g' | sort)

 # ADD CONFIGS HERE
 # --------------------------------------------------------------------
@@ -232,6 +232,9 @@ $(CONFIG_TARGETS_DEFAULT):
 all_config_targets: $(ALL_CONFIG_TARGETS)
 all_default_targets: $(CONFIG_TARGETS_DEFAULT)

+updateconfig:
+	@./Tools/kconfig/updateconfig.py
+
 # board reorganization deprecation warnings (2018-11-22)
 define deprecation_warning
 	$(warning $(1) has been deprecated and will be removed, please use $(2)!)
@@ -7,6 +7,5 @@

 . ${R}etc/init.d-posix/airframes/10016_iris

-param set-default EKF2_RNG_AID 1
 param set-default EKF2_RNG_A_HMAX 10

@@ -6,7 +6,6 @@
 . ${R}etc/init.d/rc.uuv_defaults

 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0

 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
@@ -6,7 +6,6 @@
 . ${R}etc/init.d/rc.uuv_defaults

 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0

 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
@@ -6,7 +6,6 @@
 . ${R}etc/init.d/rc.uuv_defaults

 #Set data link loss failsafe mode (0: disabled)
-param set-default NAV_DLL_ACT 0

 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
@@ -5,8 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

@@ -18,7 +16,6 @@ param set-default FW_L1_PERIOD 12

 param set-default FW_MAN_P_MAX 30

-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
@@ -46,7 +43,6 @@ param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

@@ -5,9 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,7 +34,6 @@ param set-default MIS_DIST_WPS 10000

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

@@ -5,9 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,7 +34,6 @@ param set-default MIS_DIST_WPS 10000

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

@@ -5,8 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

@@ -35,7 +33,6 @@ param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

@@ -5,9 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_THR_LND_MAX 0
@@ -19,7 +16,6 @@ param set-default FW_LND_TLALT 15

 param set-default FW_L1_PERIOD 25

-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.40
 param set-default FW_PR_I 0.05
 param set-default FW_PR_P 0.05
@@ -38,7 +34,6 @@ param set-default MIS_DIST_WPS 10000

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1
 param set-default RWTO_MAX_PITCH 20
@@ -5,8 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

@@ -18,7 +16,6 @@ param set-default FW_L1_PERIOD 12

 param set-default FW_MAN_P_MAX 30

-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PR_FF 0.2
 param set-default FW_PSP_OFF 2
@@ -46,7 +43,6 @@ param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
-param set-default NAV_LOITER_RAD 50

 param set-default RWTO_TKOFF 1

@@ -0,0 +1,10 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d-posix/airframes/1030_plane
+
+param set-default FW_THR_CRUISE 0.0
+param set-default RWTO_TKOFF 0
+
@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
@@ -10,7 +10,6 @@
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2
-param set-default FW_PR_I 0.4
 param set-default FW_PR_P 0.9
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
@@ -12,21 +12,12 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default EKF2_ARSP_THR 8
-param set-default EKF2_FUSE_BETA 1
-
 param set-default FW_AIRSPD_STALL 8

 param set-default FW_P_RMAX_NEG 20.0
-param set-default FW_P_RMAX_POS 60.0
 param set-default FW_W_RMAX 10
 param set-default FW_W_EN 1

-param set-default FW_PR_IMAX 0.4
-param set-default FW_R_TC 0.4
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_I 0.1
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.08

 param set-default MIS_LTRMIN_ALT 50
@@ -42,7 +33,6 @@ param set-default FW_ARSP_SCALE_EN 0

 param set-default FW_AIRSPD_MAX 35
 param set-default FW_AIRSPD_MIN 7
-param set-default FW_AIRSPD_TRIM 15

 param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
@@ -12,7 +12,6 @@
 param set-default MC_PITCHRATE_P 0.1
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCH_P 6.0
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLL_P 6.0
 param set-default MPC_XY_VEL_I_ACC 4
@@ -8,6 +8,15 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc

+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
+
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3

@@ -61,6 +61,7 @@ px4_add_romfs_files(
 	1035_techpod
 	1036_malolo
 	1037_believer
+	1038_glider
 	1040_standard_vtol
 	1041_tailsitter
 	1042_tiltrotor
@@ -76,6 +77,6 @@ px4_add_romfs_files(
 	2507_cloudship
 	6011_typhoon_h480
 	6011_typhoon_h480.post
-	6012_typhoon_ctrlalloc
-	6012_typhoon_ctrlalloc.post
+	6012_typhoon_h480_ctrlalloc
+	6012_typhoon_h480_ctrlalloc.post
 )
@@ -18,7 +18,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-
 param set-default BAT1_N_CELLS 3

 param set-default FW_AIRSPD_MAX 20
@@ -30,22 +29,16 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0
 param set-default FW_PR_FF 0.35
-param set-default FW_PR_I 0.1
-param set-default FW_PR_IMAX 0.4
 param set-default FW_PR_P 0.2
 param set-default FW_RR_FF 0.6
-param set-default FW_RR_I 0.1
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.3

 param set-default RWTO_TKOFF 1

-
 param set SYS_HITL 1

 # disable some checks to allow to fly
@@ -25,19 +25,12 @@

 . ${R}etc/init.d/rc.mc_defaults

-
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.1
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.0017
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0.14
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.0025
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.28
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-set MIXER quad_w

-set PWM_OUT 1234
+set MIXER quad_w
@@ -23,24 +23,18 @@

 . ${R}etc/init.d/rc.mc_defaults

-
 # TODO tune roll/pitch separately
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.004
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 2.5
 param set-default MC_YAWRATE_P 0.25
 param set-default MC_YAWRATE_I 0.25
-param set-default MC_YAWRATE_D 0

 param set-default BAT1_V_DIV 12.27559
 param set-default BAT1_A_PER_V 15.39103

 set MIXER quad_w
-
-set PWM_OUT 1234
@@ -25,7 +25,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-
 param set-default BAT1_N_CELLS 4

 param set-default MC_ROLL_P 7
@@ -37,9 +36,4 @@ param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 4
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
 set MIXER quad_w
-
-set PWM_OUT 1234
@@ -25,27 +25,19 @@

 . ${R}etc/init.d/rc.mc_defaults

-
 param set-default BAT1_N_CELLS 6
 param set-default BAT1_V_EMPTY 3.5

 param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.08
 param set-default MC_ROLLRATE_I 0.02
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.13
 param set-default MC_PITCHRATE_I 0.02
 param set-default MC_PITCHRATE_D 0.005
-param set-default MC_YAW_P 2.8
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0

 param set-default MPC_XY_VEL_MAX 2

 param set-default PWM_MAIN_MIN 1080

 set MIXER quad_w
-
-set PWM_OUT 1234
@@ -12,7 +12,6 @@
 . ${R}etc/init.d/rc.mc_defaults

 set MIXER quad_x
-set PWM_OUT 1234

 param set SYS_HITL 1

@@ -18,10 +18,8 @@ param set-default BAT1_N_CELLS 3

 param set-default COM_RC_IN_MODE 1

-param set-default EKF2_AID_MASK 1
 param set-default EKF2_ANGERR_INIT 0.01
 param set-default EKF2_GBIAS_INIT 0.01
-param set-default EKF2_HGT_MODE 0
 param set-default EKF2_MAG_TYPE 1

 param set-default FW_AIRSPD_MAX 25
@@ -36,9 +36,6 @@ param set-default MC_ROLLRATE_D 0.009
 param set-default MC_ROLLRATE_MAX 180

 param set-default MC_YAW_P 3
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0

 param set-default MPC_HOLD_MAX_XY 0.25
 param set-default MPC_THR_MIN 0.15
@@ -25,7 +25,6 @@


 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
@@ -24,20 +24,14 @@ param set-default MAV_TYPE 19
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.12
 param set-default MC_ROLLRATE_I 0.002
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0

 param set-default MC_PITCH_P 4.5
 param set-default MC_PITCHRATE_P 0.3
 param set-default MC_PITCHRATE_I 0.002
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0

 param set-default MC_YAW_P 3.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0

 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_ELEV_MC_LOCK 0
@@ -28,19 +28,13 @@ param set-default MC_ROLL_P 7
 param set-default MC_ROLLRATE_P 0.19
 param set-default MC_ROLLRATE_I 0.002
 param set-default MC_ROLLRATE_D 0.005
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.14
 param set-default MC_PITCHRATE_I 0.002
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 4
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
-
-param set-default PWM_MAIN_RATE 400

 param set-default VT_FW_MOT_OFFID 34
 param set-default VT_IDLE_PWM_MC 1080
@@ -15,12 +15,10 @@


 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400

 param set-default VT_MOT_ID 1234
 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
-param set-default VT_ELEV_MC_LOCK 1
 set MAV_TYPE 20

 set MIXER quad_x_vtol
@@ -22,13 +22,11 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400

 param set-default VT_IDLE_PWM_MC  1080
 param set-default VT_TYPE 0
-param set-default VT_ELEV_MC_LOCK 1
+
 set MAV_TYPE 20

 set MIXER quad_+_vtol
@@ -23,38 +23,25 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_AUX_DIS5 950

-param set-default PWM_MAIN_RATE 400
-
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.002
 param set-default MC_ROLLRATE_D 0.004
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 6
 param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.002
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40

 param set-default MPC_YAWRAUTO_MAX 40

-param set-default FW_PR_FF 0.5
 param set-default FW_PR_I 0.02
-param set-default FW_PR_IMAX 0.4
-param set-default FW_PR_P 0.08
 param set-default FW_RR_FF 0.6
 param set-default FW_RR_I 0.01
-param set-default FW_RR_IMAX 0.2
-param set-default FW_RR_P 0.05
 param set-default FW_THR_CRUISE 0.75

 param set-default VT_ARSP_BLEND 6
@@ -22,21 +22,10 @@
 . ${R}etc/init.d/rc.vtol_defaults


-param set-default MC_ROLL_P 6.5
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.01
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
-param set-default MC_PITCH_P 6.5
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.01
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 3.5
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
+
 param set-default MC_YAWRATE_MAX 50

 param set-default MPC_XY_P 0.8
@@ -45,7 +34,6 @@ param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_YAWRAUTO_MAX 20

 param set-default PWM_AUX_DIS3 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
@@ -15,26 +15,17 @@


 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.002
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
 param set-default MC_PITCHRATE_P 0.12
 param set-default MC_PITCHRATE_I 0.002
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.22
 param set-default MC_YAWRATE_I 0.02
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40

 param set-default MPC_YAWRAUTO_MAX 40

 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_MOT_ID 1234
@@ -15,44 +15,32 @@


 param set-default FW_THR_CRUISE 65
-param set-default FW_PR_P 0.08
-param set-default FW_PR_FF 0.5
-param set-default FW_RR_P 0.05
 param set-default FW_RR_FF 0.6

 param set-default MIS_YAW_TMT 10

 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.004
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.004
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 3.5
 param set-default MC_YAWRATE_P 0.6
 param set-default MC_YAWRATE_I 0.04
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
 param set-default MC_YAWRATE_MAX 40

 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_Z_VEL_MAX_DN 1.5
-param set-default MPC_TKO_SPEED 1.5
 param set-default MPC_LAND_SPEED 0.8
 param set-default MPC_YAWRAUTO_MAX 40

 param set-default PWM_AUX_DIS5 950
 param set-default PWM_AUX_REV1 1
 param set-default PWM_AUX_REV2 1
-param set-default PWM_MAIN_RATE 400

 param set-default VT_ARSP_TRANS 15
 param set-default VT_ARSP_BLEND 8
-param set-default VT_B_TRANS_DUR 4
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_IDLE_PWM_MC 1080
 param set-default VT_MOT_ID 1234
@@ -13,7 +13,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default FW_AIRSPD_MAX   22
 param set-default FW_AIRSPD_MIN   14
 param set-default FW_AIRSPD_TRIM  16
@@ -68,10 +67,7 @@ param set-default PWM_AUX_REV4    1

 param set-default PWM_AUX_DIS5 950

-param set-default PWM_MAIN_RATE 400
-
 param set-default VT_ARSP_TRANS   15
-param set-default VT_B_TRANS_DUR  4
 param set-default VT_F_TRANS_THR    0.6
 param set-default VT_IDLE_PWM_MC 1180
 param set-default VT_MOT_ID 1234
@@ -13,14 +13,12 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
 param set-default PWM_AUX_MIN 1000
 param set-default PWM_AUX_RATE 50

 param set-default PWM_MAIN_MAX 2000
-param set-default PWM_MAIN_RATE 400

 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 13
@@ -22,7 +22,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default CBRK_AIRSPD_CHK 162128

 param set-default FW_ARSP_MODE 1
@@ -32,22 +31,14 @@ param set-default FW_MAN_R_MAX 50
 param set-default FW_ACRO_X_MAX   270
 param set-default FW_ACRO_Y_MAX   270
 param set-default FW_ACRO_Z_MAX   180
-param set-default FW_PR_FF    0.5
-param set-default FW_PR_P 0.08
 param set-default FW_PSP_OFF  5
 param set-default FW_P_LIM_MAX    30
 param set-default FW_P_LIM_MIN    -30
-param set-default FW_P_RMAX_NEG   60
-param set-default FW_P_RMAX_POS   60
 param set-default FW_RR_FF    0.33
 param set-default FW_RR_P 0.11
-param set-default FW_YR_FF    0.3
-param set-default FW_YR_P 0.05

-param set-default MC_PITCHRATE_D  0.003
 param set-default MC_PITCHRATE_P  0.15
 param set-default MC_PITCH_P  6
-param set-default MC_ROLLRATE_D   0.003
 param set-default MC_ROLLRATE_P   0.15
 param set-default MC_ROLL_P   6
 param set-default MC_YAWRATE_MAX  120
@@ -57,9 +48,6 @@ param set-default MC_YAW_P    2.5
 param set-default MC_YAWRATE_P 0.3
 param set-default MPC_LAND_SPEED 1.2
 param set-default MPC_TKO_SPEED 2.5
-param set-default MPC_Z_VEL_MAX_UP 3
-
-param set-default PWM_MAIN_RATE 400

 param set-default SENS_BOARD_ROT 8

@@ -69,11 +57,8 @@ param set-default VT_F_TR_OL_TM   4
 param set-default VT_FW_DIFTHR_EN 1
 param set-default VT_FW_DIFTHR_SC 0.17
 param set-default VT_FW_MOT_OFFID 3
-param set-default VT_FW_PERM_STAB 0
 param set-default VT_IDLE_PWM_MC 1200
 param set-default VT_MOT_ID 123
-param set-default VT_TILT_FW  1
-param set-default VT_TILT_MC  0
 param set-default VT_TILT_TRANS   0.45
 param set-default VT_TRANS_MIN_TM 1.2
 param set-default VT_TRANS_P2_DUR 1.3
@@ -22,7 +22,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default BAT1_CAPACITY 23000
 param set-default BAT1_N_CELLS 4
 param set-default BAT1_R_INTERNAL 0.0025
@@ -69,23 +68,13 @@ param set-default LNDMC_ALT_MAX 9999
 param set-default LNDMC_XY_VEL_MAX 1
 param set-default LNDMC_Z_VEL_MAX 0.7

-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.16
 param set-default MC_ROLLRATE_I 0.01
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_ROLLRATE_FF 0
 param set-default MC_ROLLRATE_MAX 80
-param set-default MC_PITCH_P 6.5
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_PITCHRATE_MAX 80
 param set-default MC_YAW_P 3.5
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0
+
 param set-default MC_YAWRATE_MAX 20
 param set-default MC_AIRMODE 1

@@ -109,7 +98,6 @@ param set-default MPC_TILTMAX_AIR 25
 param set-default MPC_TILTMAX_LND 25
 param set-default MPC_YAWRAUTO_MAX 20

-param set-default NAV_DLL_ACT 0
 param set-default NAV_LOITER_RAD 100

 param set-default PWM_AUX_DISARM 950
@@ -119,7 +107,6 @@ param set-default PWM_MAIN_DIS6 1500
 param set-default PWM_MAIN_DIS7 900
 param set-default PWM_MAIN_DIS8 900

-param set-default PWM_MAIN_RATE 400

 param set-default SENS_BOARD_ROT 18

@@ -133,13 +120,11 @@ param set-default VT_TYPE 2
 param set-default VT_MOT_ID 1234
 param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_F_TRANS_THR 1
-param set-default VT_DWN_PITCH_MAX 8
+param set-default VT_PITCH_MIN 8
 param set-default VT_FW_QC_P 55
 param set-default VT_FW_QC_R 55
 param set-default VT_TRANS_MIN_TM 15
 param set-default VT_B_TRANS_DUR 8
-param set-default VT_WV_LND_EN 1
-param set-default VT_WV_LTR_EN 1
 param set-default VT_FWD_THRUST_SC 4
 param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
@@ -22,21 +22,17 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default BAT1_N_CELLS 6

 param set-default FW_AIRSPD_MAX 30
 param set-default FW_AIRSPD_MIN 19
 param set-default FW_AIRSPD_TRIM 23
 param set-default FW_L1_R_SLEW_MAX 40
-param set-default FW_LND_EARLYCFG 1
 param set-default FW_MAN_P_MAX 30
-param set-default FW_PR_I 0.1
 param set-default FW_PSP_OFF 3
 param set-default FW_P_LIM_MAX 18
 param set-default FW_P_LIM_MIN -25
 param set-default FW_RLL_TO_YAW_FF 0.1
-param set-default FW_RR_I 0.1
 param set-default FW_RR_P 0.08
 param set-default FW_R_LIM 45
 param set-default FW_R_RMAX 50
@@ -46,22 +42,15 @@ param set-default FW_THR_SLEW_MAX 0.6
 param set-default FW_T_HRATE_FF 0
 param set-default FW_T_SINK_MAX 15
 param set-default FW_T_SINK_MIN 3
-param set-default FW_YR_I 0.1
 param set-default FW_YR_P 0.15

-param set-default IMU_GYRO_CUTOFF 40
-
 param set-default IMU_DGYRO_CUTOFF 15
-param set-default MC_PITCHRATE_I 0.2
 param set-default MC_PITCHRATE_MAX 60
-param set-default MC_ROLLRATE_I 0.2
 param set-default MC_ROLLRATE_MAX 60
 param set-default MC_YAWRATE_I 0.15
 param set-default MC_YAWRATE_MAX 40
 param set-default MC_YAWRATE_P 0.3

-param set-default MIS_TAKEOFF_ALT 30
-
 param set-default MPC_ACC_DOWN_MAX 2
 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_ACC_UP_MAX 3
@@ -26,9 +26,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
-param set-default PWM_MAIN_RATE 400
-
 param set-default VT_IDLE_PWM_MC 1100
 param set-default VT_TYPE 1
 param set-default VT_MOT_ID 1234
@@ -25,9 +25,7 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default PWM_AUX_DIS5 950
-param set-default PWM_MAIN_RATE 400

 param set-default VT_TYPE 2
 param set-default VT_MOT_ID 12345678
@@ -18,7 +18,6 @@

 . ${R}etc/init.d/rc.vtol_defaults

-
 param set-default VT_ELEV_MC_LOCK 0
 param set-default VT_MOT_COUNT 2
 param set-default VT_TYPE 0
@@ -19,5 +19,3 @@
 . ${R}etc/init.d/rc.mc_defaults

 set MIXER tri_y_yaw+
-
-set PWM_OUT 1234
@@ -19,5 +19,3 @@
 . ${R}etc/init.d/rc.mc_defaults

 set MIXER tri_y_yaw-
-
-set PWM_OUT 1234
@@ -19,29 +19,19 @@
 . ${R}etc/init.d/rc.mc_defaults
 set MIXER coax

-
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.17
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.005
-param set-default MC_ROLLRATE_FF 0
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0.17
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.005
-param set-default MC_PITCHRATE_FF 0
 param set-default MC_YAW_P 2
 param set-default MC_YAWRATE_P 0.1
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
-param set-default MC_YAWRATE_FF 0

 param set-default NAV_ACC_RAD 2

 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_DISARM 900
-param set-default PWM_MAIN_MIN 1075
-param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_RATE 400

 param set-default RTL_RETURN_ALT 30
@@ -50,5 +40,4 @@ param set-default RTL_DESCEND_ALT 10
 set MIXER_AUX pass

 # use PWM parameters for throttle channel
-set PWM_AUX_OUT 1234
 set PWM_OUT 34
@@ -24,8 +24,7 @@ set MAV_TYPE 4

 set MIXER blade130

-#set PWM_OUT 1234
-
+set PWM_OUT none

 param set-default ATT_BIAS_MAX 0

@@ -36,7 +35,6 @@ param set-default MC_ROLLRATE_P 0
 param set-default MC_ROLLRATE_I 0
 param set-default MC_ROLLRATE_D 0
 param set-default MC_ROLLRATE_FF 0.15
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0
 param set-default MC_PITCHRATE_I 0
 param set-default MC_PITCHRATE_D 0
@@ -44,7 +42,6 @@ param set-default MC_PITCHRATE_FF 0.15
 param set-default MC_YAW_P 3
 param set-default MC_YAWRATE_P 0.1
 param set-default MC_YAWRATE_I 0
-param set-default MC_YAWRATE_D 0
 param set-default MC_ROLLRATE_MAX 720
 param set-default MC_PITCHRATE_MAX 720
 param set-default MC_YAWRATE_MAX 400
@@ -15,7 +15,6 @@

 . ${R}etc/init.d/rc.balloon_defaults

-
 param set-default COM_PREARM_MODE 2  # always in prearm state
 param set-default CBRK_IO_SAFETY 22027
 param set-default SDLOG_PROFILE 17
@@ -25,10 +24,8 @@ param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600

-param set-default SENS_BOARD_ROT 0
 set MAV_TYPE 8
 param set MAV_TYPE ${MAV_TYPE}

-
 set MIXER IO_pass
 set MIXER_AUX pass
@@ -25,10 +25,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55
@@ -25,10 +25,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55
@@ -26,10 +26,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_AIRSPD_MIN 10
-param set-default FW_AIRSPD_TRIM 15
-param set-default FW_AIRSPD_MAX 20
-
 param set-default FW_MAN_P_MAX 55
 param set-default FW_MAN_R_MAX 55
 param set-default FW_R_LIM 55
@@ -28,7 +28,6 @@

 set VEHICLE_TYPE mc

-
 param set-default NAV_ACC_RAD 2

 param set-default PWM_AUX_RATE 400
@@ -36,8 +35,6 @@ param set-default PWM_AUX_DISARM 900
 param set-default PWM_AUX_MIN 1075
 param set-default PWM_AUX_MAX 1950

-param set-default PWM_MAIN_MIN 1075
-param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_RATE 400

 param set-default RTL_DESCEND_ALT 10
@@ -18,6 +18,5 @@
 param set-default COM_PREARM_MODE 2
 param set-default CBRK_IO_SAFETY 22027

-
 set MIXER cloudship
 set PWM_OUT 1234
@@ -22,7 +22,6 @@
 . ${R}etc/init.d/rc.fw_defaults

 param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_MIN 10
 param set-default FW_AIRSPD_TRIM 13
 param set-default FW_R_TC 0.3
 param set-default FW_P_TC 0.3
@@ -30,15 +29,11 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0
 param set-default FW_PR_FF 0.35
-param set-default FW_PR_IMAX 0.4
-param set-default FW_PR_P 0.08
 param set-default FW_RR_FF 0.6
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.04

 param set-default PWM_MAIN_DISARM 1000
@@ -24,20 +24,15 @@
 . ${R}etc/init.d/rc.fw_defaults

 param set-default FW_AIRSPD_MIN 13
-param set-default FW_AIRSPD_TRIM 15
 param set-default FW_AIRSPD_MAX 25
 param set-default FW_R_TC 0.3
 param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.75
 param set-default FW_L1_PERIOD 15
 param set-default FW_PR_FF 0.2
 param set-default FW_PR_IMAX 0.2
 param set-default FW_PR_P 0.03
 param set-default FW_P_LIM_MAX 50
 param set-default FW_P_LIM_MIN -50
-param set-default FW_P_ROLLFF 1
-param set-default FW_RR_FF 0.5
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.08
 param set-default FW_R_LIM 50
 param set-default FW_R_RMAX 50
@@ -30,7 +30,6 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0
@@ -38,5 +37,4 @@ param set-default FW_PR_FF 0.35
 param set-default FW_RR_FF 0.6
 param set-default FW_RR_P 0.04

-
 set MIXER fw_generic_wing
@@ -25,7 +25,6 @@

 param set-default BAT1_N_CELLS 2
 param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_MIN 10
 param set-default FW_AIRSPD_TRIM 13
 param set-default FW_R_TC 0.3
 param set-default FW_P_TC 0.3
@@ -33,7 +32,6 @@ param set-default FW_L1_DAMPING 0.74
 param set-default FW_L1_PERIOD 16
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 5
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 5
 param set-default FW_THR_LND_MAX 0
@@ -43,7 +41,6 @@ param set-default FW_RR_P 0.04

 param set-default PWM_MAIN_DISARM 1000

-
 # Configure this as plane.
 set MAV_TYPE 1

@@ -23,7 +23,6 @@

 param set-default FW_AIRSPD_MAX 30
 param set-default FW_AIRSPD_MIN 13
-param set-default FW_AIRSPD_TRIM 15

 param set-default NAV_LOITER_RAD 150

@@ -27,17 +27,11 @@ param set-default FW_AIRSPD_MIN 15
 param set-default FW_AIRSPD_TRIM 20
 param set-default FW_AIRSPD_MAX 27
 param set-default FW_ATT_TC 0.3
-param set-default FW_L1_DAMPING 0.75
-param set-default FW_L1_PERIOD 20
 param set-default FW_PR_FF 0.35
 param set-default FW_PR_IMAX 0.2
 param set-default FW_PR_P 0.05
-param set-default FW_P_LIM_MAX 45
-param set-default FW_P_LIM_MIN -45
-param set-default FW_P_ROLLFF 1
 param set-default FW_P_TC 0.3
 param set-default FW_RR_FF 0.3
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.03
 param set-default FW_R_LIM 40
 param set-default FW_R_RMAX 50
@@ -26,38 +26,15 @@
 ####################################
 # Airspeed
 ####################################
-param set-default FW_AIRSPD_MIN  15 # = 29 knots
-param set-default FW_AIRSPD_TRIM 20 # = 39 knots
 param set-default FW_AIRSPD_MAX  27 # = 52 knots

-####################################
-# The Main L1 Controller
-####################################
-param set-default FW_L1_PERIOD 20 #units of meters
-
-# Damping factor for L1 control (def = 0.75)
-param set-default FW_L1_DAMPING 0.75
-
 ####################################
 # Pitch
 ####################################

-# Basic limits (def = +/- 45 deg)
-param set-default FW_P_LIM_MAX  45
-param set-default FW_P_LIM_MIN -45
-
-# Time Constant (def = 0.4s)
-param set-default FW_P_TC 0.4
-
 # Pitch rate feed forward (def = 0.5 %/rad/sec)
 param set-default FW_PR_FF 0.35

-# Pitch rate integrator limit (def = 0.4)
-param set-default FW_PR_IMAX 0.4
-
-# Pitch rate proportional gain (def = 0.08 %/rad/sec)
-param set-default FW_PR_P 0.08
-
 ####################################
 # Roll
 ####################################
@@ -68,21 +45,8 @@ param set-default FW_R_LIM 40
 # Roll rate upper limit (def = 70 deg/s)
 param set-default FW_R_RMAX 50

-# Roll Time Constant (def = 0.4 s)
-param set-default FW_R_TC 0.4
-
-# Roll rate feed forward (def = 0.5 %/rad/sec)
-param set-default FW_RR_FF 0.5
-
-# Roll rate proportional Gain (def = 0.05 %/rad/sec)
-param set-default FW_RR_P 0.05
-
-# Roll Integrator Anti-Windup
-param set-default FW_RR_IMAX 0.2
-
 param set-default PWM_MAIN_DISARM 1000

-
 set MIXER fw_generic_wing.main.mix

 # Provide ESC a constant 1000 us pulse
@@ -21,28 +21,21 @@

 . ${R}etc/init.d/rc.fw_defaults

-
 param set-default FW_AIRSPD_MAX 25
 param set-default FW_AIRSPD_MIN 12.5
 param set-default FW_AIRSPD_TRIM 16.5
-param set-default FW_L1_DAMPING 0.75
 param set-default FW_L1_PERIOD 15
 param set-default FW_LND_ANG 15
 param set-default FW_LND_FLALT 8
-param set-default FW_LND_HHDIST 15
 param set-default FW_LND_HVIRT 13
 param set-default FW_LND_TLALT 10
 param set-default FW_THR_LND_MAX 0
 param set-default FW_P_LIM_MAX 20
 param set-default FW_P_LIM_MIN -30
 param set-default FW_R_LIM 45
-param set-default FW_R_TC 0.4
-param set-default FW_P_TC 0.4
 param set-default FW_PR_FF 0.45
-param set-default FW_PR_IMAX 0.4
 param set-default FW_PR_P 0.005
 param set-default FW_RR_FF 0.45
-param set-default FW_RR_IMAX 0.2
 param set-default FW_RR_P 0.013
 param set-default FW_P_RMAX_NEG 70
 param set-default FW_P_RMAX_POS 70
@@ -21,7 +21,3 @@
 #

 . ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_x
-
-set PWM_OUT 1234
@@ -13,22 +13,12 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 param set-default MC_ROLL_P 8
 param set-default MC_ROLLRATE_P 0.08
 param set-default MC_ROLLRATE_I 0.16
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 8
 param set-default MC_PITCHRATE_P 0.1
-param set-default MC_PITCHRATE_I 0.2
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.15
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0

 param set-default MPC_THR_MIN 0.06
 param set-default MPC_MANTHR_MIN 0.06
@@ -13,10 +13,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 param set-default ATT_BIAS_MAX 0

 param set-default CBRK_IO_SAFETY 22027
@@ -33,7 +29,6 @@ param set-default MC_PITCHRATE_D 0.004
 param set-default MC_YAW_P 4
 param set-default MC_YAWRATE_P 0.3
 param set-default MC_YAWRATE_I 0.2
-param set-default MC_YAWRATE_D 0
 param set-default MPC_THR_MIN 0.06

 param set-default PWM_MAIN_MIN 1075
@@ -11,21 +11,11 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_YAW_P 2.8
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
+

 # DJI ESCs do not support calibration and need a higher min
 param set-default PWM_MAIN_MIN 1230
@@ -10,21 +10,11 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
 param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.003
 param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.003
-param set-default MC_YAW_P 2.8
 param set-default MC_YAWRATE_P 0.3
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0

 # DJI ESCs do not support calibration and need a higher min
 param set-default PWM_MAIN_MIN 1230
@@ -13,13 +13,7 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 param set-default MC_ROLLRATE_P 0.18
 param set-default MC_PITCHRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
 param set-default MC_PITCHRATE_I 0.15
-param set-default MC_ROLLRATE_D 0.003
-param set-default MC_PITCHRATE_D 0.003
@@ -13,12 +13,7 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 param set-default IMU_GYRO_CUTOFF 30
-param set-default IMU_DGYRO_CUTOFF 30

 param set-default MC_ROLLRATE_P 0.14
 param set-default MC_PITCHRATE_P 0.14
@@ -16,10 +16,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 # System parameters
 # use FMU motor outputs for less delay in the rate control loop
 param set-default SYS_USE_IO 0
@@ -33,7 +29,6 @@ param set-default EKF2_AID_MASK 35
 param set-default EKF2_IMU_POS_X 0.02
 param set-default EKF2_GPS_POS_X 0.055
 param set-default EKF2_GPS_POS_Z -0.15
-param set-default EKF2_HGT_MODE 0
 param set-default EKF2_MIN_RNG 0.03
 param set-default EKF2_OF_POS_X 0.055
 param set-default EKF2_OF_POS_Y 0.02
@@ -41,7 +36,6 @@ param set-default EKF2_OF_POS_Z 0.065
 param set-default EKF2_REQ_HDRIFT 0.3
 param set-default EKF2_REQ_SACC 1
 param set-default EKF2_REQ_VDRIFT 0.3
-param set-default EKF2_RNG_AID 1
 param set-default EKF2_RNG_A_HMAX 8
 param set-default EKF2_RNG_A_VMAX 2
 param set-default EKF2_RNG_POS_X 0.055
@@ -66,15 +60,8 @@ param set-default MC_ACRO_R_MAX 200
 param set-default MC_ACRO_SUPEXPO 0
 param set-default MC_ACRO_SUPEXPOY 0
 param set-default MC_ACRO_Y_MAX 150
-param set-default IMU_DGYRO_CUTOFF 30
 param set-default MC_PITCHRATE_D 0.0015
-param set-default MC_PITCHRATE_I 0.2
-param set-default MC_PITCHRATE_K 1
-param set-default MC_PITCHRATE_P 0.15
 param set-default MC_ROLLRATE_D 0.0015
-param set-default MC_ROLLRATE_I 0.2
-param set-default MC_ROLLRATE_K 1
-param set-default MC_ROLLRATE_P 0.15
 param set-default MC_YAWRATE_P 0.3

 # Position Control Tuning
@@ -86,7 +73,6 @@ param set-default MPC_MANTHR_MIN 0
 param set-default MPC_MAN_Y_MAX 120
 param set-default MPC_TILTMAX_AIR 45
 param set-default MPC_THR_HOVER 0.3
-param set-default MPC_THR_MIN 0.12
 param set-default MPC_TKO_SPEED 1
 param set-default MPC_VEL_MANUAL 5
 param set-default MPC_XY_CRUISE 5
@@ -102,23 +88,17 @@ param set-default MPC_LAND_ALT2 1
 # Navigator Parameters
 param set-default NAV_ACC_RAD 2

-# PWM and RC Parameters
-param set-default PWM_MAIN_MAX 1950
-param set-default PWM_MAIN_MIN 1075
-
 # use oneshot motor output protocol
 param set-default PWM_MAIN_RATE 0

 # RTL Parameters
 param set-default RTL_DESCEND_ALT 5
 param set-default RTL_RETURN_ALT 5
-param set-default RTL_CONE_ANG 45

 # Logging Parameters
 param set-default SDLOG_PROFILE 131

 # Sensors Parameters
-param set-default SENS_BOARD_ROT 0
 param set-default SENS_CM8JL65_CFG 104
 param set-default SENS_FLOW_MAXHGT 25
 param set-default SENS_FLOW_MINHGT 0.5
@@ -18,16 +18,10 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-param set-default IMU_GYRO_CUTOFF 40
 param set-default IMU_DGYRO_CUTOFF 20

 param set-default MC_ROLLRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
-param set-default MC_ROLLRATE_D 0.003

 param set-default MC_PITCHRATE_P 0.18
 param set-default MC_PITCHRATE_I 0.15
-param set-default MC_PITCHRATE_D 0.003
@@ -13,6 +13,7 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc

+set MIXER none

 param set-default MPC_USE_HTE 0

@@ -50,7 +51,5 @@ param set-default CA_MC_R3_CT 6.5
 param set-default CA_MC_R3_KM -0.05

 set MIXER direct
-set PWM_OUT 1234

 set MIXER_AUX direct_aux
-set PWM_AUX_OUT 1234
@@ -18,7 +18,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-
 # tuning
 param set-default MC_PITCHRATE_P    0.11
 param set-default MC_ROLLRATE_P     0.11
@@ -83,7 +82,5 @@ param set-default RC5_TRIM          1500
 param set-default MAV_0_RATE 80000
 param set-default MAV_0_MODE 2
 param set-default SER_TEL1_BAUD 921600
-set MIXER quad_x

-set PWM_OUT 1234
 set MIXER_AUX none
@@ -13,11 +13,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.14
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.004
@@ -20,8 +20,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-
-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.14
 param set-default MC_ROLLRATE_I 0.1
 param set-default MC_ROLLRATE_D 0.004
@@ -44,8 +42,4 @@ param set-default RTL_DESCEND_ALT 10

 set MIXER quad_h

-set PWM_OUT 1234
-
 set MIXER_AUX pass
-
-set PWM_AUX_OUT 1234
@@ -23,7 +23,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-
 param set-default CBRK_SUPPLY_CHK 894281
 param set-default CBRK_USB_CHK 197848

@@ -57,5 +56,3 @@ param set-default SYS_HAS_MAG 0
 param set-default BAT1_N_CELLS 2
 # The Whoop uses reversed props
 set MIXER quad_h
-set PWM_OUT 1234
-
@@ -12,22 +12,15 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 param set-default MC_ROLL_P 8
 param set-default MC_ROLLRATE_P 0.08
 param set-default MC_ROLLRATE_I 0.25
 param set-default MC_ROLLRATE_D 0.001
 param set-default MC_PITCH_P 8
 param set-default MC_PITCHRATE_P 0.08
-param set-default MC_PITCHRATE_I 0.25
 param set-default MC_PITCHRATE_D 0.001
 param set-default MC_YAW_P 4
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
+

 param set-default MC_ROLLRATE_MAX 1600
 param set-default MC_PITCHRATE_MAX 1600
@@ -23,11 +23,9 @@
 . ${R}etc/init.d/rc.mc_defaults

 set MIXER quad_s250aq
+
 set MAV_TYPE 2

-set PWM_OUT 1234
-
-
 param set-default ATT_BIAS_MAX 0

 param set-default CBRK_IO_SAFETY 22027
@@ -41,9 +39,8 @@ param set-default MC_PITCHRATE_P 0.19
 param set-default MC_PITCHRATE_I 0.1
 param set-default MC_PITCHRATE_D 0.0055
 param set-default MC_YAW_P 4
-param set-default MC_YAWRATE_P 0.2
-param set-default MC_YAWRATE_I 0.1
-param set-default MC_YAWRATE_D 0
+
+
 param set-default MC_ROLLRATE_MAX 720
 param set-default MC_PITCHRATE_MAX 720
 param set-default MC_YAWRATE_MAX 400
@@ -15,10 +15,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 # The set does not include a battery, but most people will probably use 4S
 param set-default BAT1_N_CELLS 4

@@ -48,7 +44,6 @@ param set-default MPC_THR_HOVER 0.25
 param set-default MPC_THR_MIN 0.05
 param set-default MPC_Z_VEL_I_ACC 1.7

-param set-default PWM_MAIN_MAX 1950
 param set-default PWM_MAIN_MIN 1050

 param set-default PWM_MAIN_RATE 0
@@ -13,10 +13,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 param set-default BAT1_N_CELLS 4

 param set-default GPS_1_CONFIG 0
@@ -13,22 +13,15 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234
-
-
 param set-default BAT1_N_CELLS 6

-param set-default MC_ROLL_P 6.5
 param set-default MC_ROLLRATE_P 0.05
 param set-default MC_ROLLRATE_I 0.05
 param set-default MC_ROLLRATE_D 0.001
-param set-default MC_PITCH_P 6.5
 param set-default MC_PITCHRATE_P 0.05
 param set-default MC_PITCHRATE_I 0.05
 param set-default MC_PITCHRATE_D 0.001
-param set-default MC_YAWRATE_P 0.2
+
 param set-default MC_YAWRATE_I 0
-param set-default MC_YAWRATE_D 0

 param set-default PWM_MAIN_MIN 1200
@@ -19,10 +19,8 @@
 set MIXER none
 set MIXER_AUX none

-
 # Battery settings
 param set-default BAT_CRIT_THR 0.20
-param set-default BAT_EMERGEN_THR 0.05
 param set-default BAT_LOW_THR 0.25

 param set-default BAT1_CAPACITY 2800.0
@@ -35,7 +33,6 @@ param set-default CBRK_SUPPLY_CHK 894281

 param set-default COM_DISARM_LAND 0.1
 param set-default COM_DISARM_PRFLT 3
-param set-default COM_DL_LOSS_T 10
 param set-default COM_FLTMODE1 -1
 param set-default COM_FLTMODE2 -1
 param set-default COM_FLTMODE3 -1
@@ -43,7 +40,6 @@ param set-default COM_FLTMODE4  2
 param set-default COM_FLTMODE5 -1
 param set-default COM_FLTMODE6  6
 param set-default COM_RC_LOSS_T 3
-param set-default COM_RC_OVERRIDE 1


 # ekf2
@@ -61,8 +57,6 @@ param set-default EKF2_GPS_POS_Z 0.0
 param set-default EKF2_GPS_V_NOISE 0.5

 param set-default EKF2_IMU_POS_X 0.06
-param set-default EKF2_IMU_POS_Y 0.0
-param set-default EKF2_IMU_POS_Z 0.0

 param set-default EKF2_MAG_DELAY 0
 param set-default EKF2_MAG_NOISE 0.1
@@ -79,7 +73,6 @@ param set-default EKF2_PCOEF_XN -0.3
 param set-default EKF2_PCOEF_XP -0.4
 param set-default EKF2_PCOEF_YN -0.4
 param set-default EKF2_PCOEF_YP -0.4
-param set-default EKF2_PCOEF_Z 0.0

 param set-default EKF2_RNG_A_VMAX 1.0
 param set-default EKF2_RNG_AID 0
@@ -119,7 +112,6 @@ param set-default MC_ROLL_P 8.0

 # Yaw angle & rate setting
 param set-default MC_YAWRATE_P 0.1
-param set-default MC_YAWRATE_I 0.1
 param set-default MC_YAWRATE_MAX 120.0
 param set-default MC_YAW_P 2.5

@@ -145,7 +137,6 @@ param set-default MPC_Z_P 2.0
 param set-default MPC_Z_VEL_D 0.0
 param set-default MPC_Z_VEL_I 0.02
 param set-default MPC_Z_VEL_MAX_DN 2.0
-param set-default MPC_Z_VEL_MAX_UP 3.0
 param set-default MPC_Z_VEL_P 0.27


--- a/Show More
+++ b/Show More