Merge remote-tracking branch 'px4/master' into pr-param_notify_schedule

Co-authored-by: Matthias Grob <maetugr@gmail.com>

.ci/Jenkinsfile-compile

@@ -61,18 +61,20 @@ pipeline {
                      "holybro_kakutef7_default",
                      "holybro_kakuteh7_default",
                      "holybro_pix32v5_default",
-                     "matek_h743-slim",
                      "matek_gnss-m9n-f4_canbootloader",
                      "matek_gnss-m9n-f4_default",
+                     "matek_h743-mini_default",
+                     "matek_h743-slim_default",
+                     "matek_h743_default",
                      "modalai_fc-v1_default",
                      "modalai_fc-v1_rtps",
                      "modalai_fc-v2_default",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7_default",
-                     "mro_ctrl-zero-h7_rtps",
                      "mro_ctrl-zero-h7-oem_default",
                      "mro_ctrl-zero-h7-oem_rtps",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7_rtps",
                      "mro_pixracerpro_default",
                      "mro_pixracerpro_rtps",
                      "mro_x21-777_default",
@@ -87,25 +89,27 @@ pipeline {
                      "nxp_ucans32k146_canbootloader",
                      "nxp_ucans32k146_default",
                      "omnibus_f4sd_default",
-                     "raspberrypi_pico_default",
                      "px4_fmu-v2_default",
                      "px4_fmu-v2_fixedwing",
+                     "px4_fmu-v2_lto",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
                      "px4_fmu-v3_default",
                      "px4_fmu-v4_default",
                      "px4_fmu-v4pro_default",
+                     "px4_fmu-v5_cyphal",
                      "px4_fmu-v5_debug",
                      "px4_fmu-v5_default",
+                     "px4_fmu-v5_lto",
                      "px4_fmu-v5_rtps",
                      "px4_fmu-v5_stackcheck",
                      "px4_fmu-v5_uavcanv0periph",
-                     "px4_fmu-v5_uavcanv1",
                      "px4_fmu-v5x_default",
                      "px4_fmu-v6c_default",
                      "px4_fmu-v6u_default",
                      "px4_fmu-v6x_default",
                      "px4_io-v2_default",
+                     "raspberrypi_pico_default",
                      "sky-drones_smartap-airlink_default",
                      "spracing_h7extreme_default",
                      "uvify_core_default"

.ci/Jenkinsfile-hardware

@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {
 
   // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
 
   resetParameters()
 
@@ -809,6 +809,9 @@ void runTests() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
 
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ostest"'
+  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot after ostest
+
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander_tests" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "controllib_test"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "lightware_laser_test"'
@@ -864,12 +867,15 @@ void printTopics() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'

.github/ISSUE_TEMPLATE/1_Bug_report.md

@@ -1,32 +1,34 @@
 ---
-name: Bug report
+name: 🐛 Bug report
 about: Create a report to help us improve
+labels: bug-report
 
 ---
 
-**Describe the bug**
+## Describe the bug
 A clear and concise description of the bug.
 
-**To Reproduce**
+## To Reproduce
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error
 
-**Expected behavior**
+## Expected behavior
 A clear and concise description of what you expected to happen.
 
-**Log Files and Screenshots**
+## Log Files and Screenshots
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
-- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).
+- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
+- Share the link to the log (Copy and paste the URL of the log)
 
 Add screenshots to help explain your problem.
 
-**Drone (please complete the following information):**
+## Drone (please complete the following information):
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.
 
-**Additional context**
+## Additional context
 Add any other context about the problem here.

.github/ISSUE_TEMPLATE/2_Feature_request.md

@@ -1,19 +1,20 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
+labels: feature-request
 
 ---
 
 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).
 
-**Describe problem solved by the proposed feature**
+## Describe problem solved by the proposed feature
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...
 
-**Describe your preferred solution**
+## Describe your preferred solution
 A clear and concise description of what you want to happen.
 
-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.
 
-**Additional context**
+## Additional context
 Add any other context or screenshots for the feature request here.

.github/ISSUE_TEMPLATE/3_Support_question.md

@@ -1,10 +1,13 @@
 ---
 name: ⛔ Support Question
-about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.
+about: See http://discuss.px4.io/ for questions about using PX4.
 
 ---
 
-We use GitHub issues only to discuss PX4 bugs and new features. For
-questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).
+## Attention! Please read the note below
+
+We use GitHub issues only to discuss PX4 bugs and new features.
+
+**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**
 
 Thanks!

.github/ISSUE_TEMPLATE/4_Documentation_issue.md

@@ -1,9 +1,11 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/Devguide for documentation issues
+about: See https://github.com/PX4/px4_user_guide for documentation issues
 
 ---
 
-PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).
+## Attention! Please read the note below
+
+**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**
 
 Thanks!

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.
 
-**Describe problem solved by this pull request**
-A clear and concise description of the problem this proposed change will solve.
+## Describe problem solved by this pull request
+A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
 E.g. For this use case I ran into...
 
-**Describe your solution**
+## Describe your solution
 A clear and concise description of what you have implemented.
 
-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.
 
-**Test data / coverage**
+## Test data / coverage
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.
 
-**Additional context**
+## Additional context
 Add any other related context or media.

.github/workflows/compile_nuttx.yml

@@ -37,8 +37,10 @@ jobs:
           holybro_kakutef7,
           holybro_kakuteh7,
           holybro_pix32v5,
-          matek_h743-slim,
           matek_gnss-m9n-f4,
+          matek_h743,
+          matek_h743-mini,
+          matek_h743-slim,
           modalai_fc-v1,
           modalai_fc-v2,
           mro_ctrl-zero-f7,
@@ -53,7 +55,6 @@ jobs:
           nxp_fmurt1062-v1,
           nxp_ucans32k146,
           omnibus_f4sd,
-          raspberrypi_pico,
           px4_fmu-v2,
           px4_fmu-v3,
           px4_fmu-v4,
@@ -63,6 +64,7 @@ jobs:
           px4_fmu-v6c,
           px4_fmu-v6u,
           px4_fmu-v6x,
+          raspberrypi_pico,
           sky-drones_smartap-airlink,
           spracing_h7extreme,
           uvify_core

.gitmodules

@@ -36,14 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/uavcan_v1/libcanard"]
-	path = src/drivers/uavcan_v1/libcanard
-	url = https://github.com/UAVCAN/libcanard.git
-[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
-	path = src/drivers/uavcan_v1/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types.git
-[submodule "src/drivers/uavcan_v1/legacy_data_types"]
-	path = src/drivers/uavcan_v1/legacy_data_types
+[submodule "src/drivers/cyphal/libcanard"]
+	path = src/drivers/cyphal/libcanard
+	url = https://github.com/opencyphal/libcanard.git
+[submodule "src/drivers/cyphal/public_regulated_data_types"]
+	path = src/drivers/cyphal/public_regulated_data_types
+	url = https://github.com/opencyphal/public_regulated_data_types.git
+[submodule "src/drivers/cyphal/legacy_data_types"]
+	path = src/drivers/cyphal/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]

.vscode/settings.json

@@ -126,8 +126,6 @@
         },
         "search.showLineNumbers": true,
         "telemetry.enableTelemetry": false,
-        "terminal.integrated.copyOnSelection": true,
-        "terminal.integrated.rightClickBehavior": "paste",
         "terminal.integrated.scrollback": 5000,
         "window.title": "${dirty} ${activeEditorMedium}${separator}${rootName}",
         "workbench.editor.highlightModifiedTabs": true,

CMakeLists.txt

@@ -99,7 +99,7 @@
 #
 #=============================================================================
 
-cmake_minimum_required(VERSION 3.2 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.9 FATAL_ERROR)
 
 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -234,6 +234,14 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)
 
+# Check if LTO option and check if toolchain supports it
+if(LTO)
+    include(CheckIPOSupported)
+    check_ipo_supported()
+    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
+    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
+endif()
+
 set(package-contact "px4users@googlegroups.com")
 
 set(CMAKE_CXX_STANDARD 14)

Kconfig

@@ -51,6 +51,13 @@ menu "Toolchain"
         string "Architecture"
         default ""
 
+    config BOARD_LTO
+        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
+        default n
+        help
+            Enables LTO flag in linker
+            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
+
     config BOARD_FULL_OPTIMIZATION
         bool "Full optmization (O3)"
         default n

Makefile

@@ -331,7 +331,7 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 
 .PHONY: coverity_scan

ROMFS/cannode/init.d/rcS

@@ -86,10 +86,28 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial
 
 # Check for flow sensor
-if param compare SENS_EN_PX4FLOW 1
+if param compare -s SENS_EN_PX4FLOW 1
 then
 	px4flow start -X &
 fi
 
+if param compare -s IMU_GYRO_CAL_EN 1
+then
+	gyro_calibration start
+fi
+
+
+if param compare -s MBE_ENABLE 1
+then
+	# conservative mag bias estimation
+	param set-default MBE_LEARN_GAIN 5
+	param set-default IMU_GYRO_CUTOFF 20
+	mag_bias_estimator start
+fi
+
+param set-default SENS_MAG_RATE 100
+
+sensors start
+
 uavcannode start
 unset R

ROMFS/px4fmu_common/init.d-posix/airframes/10019_omnicopter

@@ -0,0 +1,101 @@
+#!/bin/sh
+#
+# @name 6DoF Omnicopter SITL
+#
+# @type Quadrotor Wide
+#
+# @maintainer Jaeyoung Lim <jalim@ethz.ch>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default SYS_CTRL_ALLOC 1
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 255
+
+param set-default CA_ROTOR0_PX 0.14435
+param set-default CA_ROTOR0_PY -0.14435
+param set-default CA_ROTOR0_PZ -0.14435
+param set-default CA_ROTOR0_KM 0.05 # CCW
+param set-default CA_ROTOR0_AX -0.788675
+param set-default CA_ROTOR0_AY -0.211325
+param set-default CA_ROTOR0_AZ -0.57735
+
+param set-default CA_ROTOR1_PX -0.14435
+param set-default CA_ROTOR1_PY -0.14435
+param set-default CA_ROTOR1_PZ -0.14435
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR1_AX 0.211325
+param set-default CA_ROTOR1_AY -0.788675
+param set-default CA_ROTOR1_AZ 0.57735
+
+param set-default CA_ROTOR2_PX 0.14435
+param set-default CA_ROTOR2_PY 0.14435
+param set-default CA_ROTOR2_PZ -0.14435
+param set-default CA_ROTOR2_KM 0.05
+param set-default CA_ROTOR2_AX -0.211325
+param set-default CA_ROTOR2_AY 0.788675
+param set-default CA_ROTOR2_AZ 0.57735
+
+param set-default CA_ROTOR3_PX -0.14435
+param set-default CA_ROTOR3_PY 0.14435
+param set-default CA_ROTOR3_PZ -0.14435
+param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR3_AX 0.788675
+param set-default CA_ROTOR3_AY 0.211325
+param set-default CA_ROTOR3_AZ -0.57735
+
+param set-default CA_ROTOR4_PX 0.14435
+param set-default CA_ROTOR4_PY -0.14435
+param set-default CA_ROTOR4_PZ 0.14435
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR4_AX 0.788675
+param set-default CA_ROTOR4_AY 0.211325
+param set-default CA_ROTOR4_AZ -0.57735
+
+param set-default CA_ROTOR5_PX -0.14435
+param set-default CA_ROTOR5_PY -0.14435
+param set-default CA_ROTOR5_PZ 0.14435
+param set-default CA_ROTOR5_KM 0.05
+param set-default CA_ROTOR5_AX -0.211325
+param set-default CA_ROTOR5_AY 0.788675
+param set-default CA_ROTOR5_AZ 0.57735
+
+param set-default CA_ROTOR6_PX 0.14435
+param set-default CA_ROTOR6_PY 0.14435
+param set-default CA_ROTOR6_PZ 0.14435
+param set-default CA_ROTOR6_KM 0.05
+param set-default CA_ROTOR6_AX 0.211325
+param set-default CA_ROTOR6_AY -0.788675
+param set-default CA_ROTOR6_AZ 0.57735
+
+param set-default CA_ROTOR7_PX -0.14435
+param set-default CA_ROTOR7_PY 0.14435
+param set-default CA_ROTOR7_PZ 0.14435
+param set-default CA_ROTOR7_KM 0.05
+param set-default CA_ROTOR7_AX -0.788675
+param set-default CA_ROTOR7_AY -0.211325
+param set-default CA_ROTOR7_AZ -0.57735
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+param set-default PWM_MAIN_FUNC7 107
+param set-default PWM_MAIN_FUNC8 108
+
+# disable MC desaturation which improves attitude tracking
+param set-default CA_METHOD 0
+
+# disable attitude failure detection
+param set-default FD_FAIL_P 0
+param set-default FD_FAIL_R 0
+
+set MIXER skip
+set MIXER_AUX none

ROMFS/px4fmu_common/init.d-posix/airframes/10040_quadx

@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name QuadrotorX SITL for SIH
+#
+# @type Quadrotor
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+set MIXER quad_x
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set SIH_VEHICLE_TYPE 0

ROMFS/px4fmu_common/init.d-posix/airframes/10041_airplane

@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name Plane SITL for SIH
+#
+# @type Plane
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+
+. ${R}etc/init.d/rc.fw_defaults
+
+set MIXER AERT
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 6.0
+param set SIH_MASS 0.3
+param set SIH_IXX 0.00402
+param set SIH_IYY 0.0144
+param set SIH_IZZ 0.0177
+param set SIH_IXZ 0.00046
+param set SIH_KDV 0.2
+
+param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
+param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)

ROMFS/px4fmu_common/init.d-posix/airframes/10042_xvert

@@ -0,0 +1,45 @@
+#!/bin/sh
+#
+# @name SIH Tailsitter Duo
+#
+# @type VTOL
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 0
+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.3
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default MAV_TYPE 19
+set MAV_TYPE 19
+set MIXER vtol_tailsitter_duo_sat
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0.0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.145
+
+# sih as tailsitter
+param set SIH_VEHICLE_TYPE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -18,3 +18,7 @@ param set-default LPE_FAKE_ORIGIN 1
 
 param set-default MPC_ALT_MODE 2
 
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -9,7 +9,6 @@
 
 # EKF2
 param set-default EKF2_AID_MASK 2
-param set-default SENS_FLOW_ROT 0
 
 # LPE: Flow-only mode
 param set-default LPE_FUSION 242

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -25,6 +25,8 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3
 
+param set-default FW_SPOILERS_LND 0.4
+
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -7,6 +7,11 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+# TODO: Enable motor failure detection when the
+# VTOL no longer reports 0A for all ESCs in SITL
+param set-default FD_ACT_EN 0
+param set-default FD_ACT_MOT_TOUT 500
+
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2
 

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -9,7 +9,7 @@
 
 param set-default MAV_TYPE 21
 
-# param set-default SYS_CTRL_ALLOC 1
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3
 
 param set-default CA_ROTOR_COUNT 4
@@ -27,9 +27,7 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05
 
 param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
-param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc.post

@@ -1,6 +1,4 @@
 
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
 
 # shellcheck disable=SC2154

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -35,8 +35,12 @@ px4_add_romfs_files(
 	10016_iris
 	10017_iris_ctrlalloc
 	10018_iris_foggy_lidar
+	10019_omnicopter
 	10020_if750a
 	10030_px4vision
+	10040_quadx
+	10041_airplane
+	10042_xvert
 	1010_iris_opt_flow
 	1010_iris_opt_flow.post
 	1011_iris_irlock

ROMFS/px4fmu_common/init.d-posix/px4-rc.mavlink

@@ -30,3 +30,12 @@ mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $ud
 
 # Onboard link to gimbal
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
+
+# To display for SIH sitl
+if [ "$SIM_MODE" = "sihsim" ]; then
+	udp_sihsim_port_local=$((19450+px4_instance))
+	udp_sihsim_port_remote=$((19410+px4_instance))
+	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote
+	mavlink stream -r 200 -s HIL_ACTUATOR_CONTROLS -u  $udp_sihsim_port_local
+	mavlink stream -r 25 -s HIL_STATE_QUATERNION -u  $udp_sihsim_port_local
+fi

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -95,10 +95,9 @@ fi
 
 if param compare SYS_AUTOCONFIG 1
 then
+	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
-
-	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
-	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi
 
 # multi-instance setup
@@ -155,6 +154,8 @@ param set-default SDLOG_DIRS_MAX 7
 
 param set-default TRIG_INTERFACE 3
 
+param set-default SYS_FAILURE_EN 1
+
 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_DL_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 10" | bc)
@@ -196,14 +197,6 @@ fi
 
 . "$autostart_file"
 
-#
-# If autoconfig parameter was set, reset it and save parameters.
-#
-if [ $AUTOCNF = yes ]
-then
-	param set SYS_AUTOCONFIG 0
-fi
-
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250
 
@@ -211,8 +204,11 @@ param set IMU_INTEG_RATE 250
 . px4-rc.params
 
 dataman start
+# start sih in sih_sim mode, otherwise simulator module
+if [ "$SIM_MODE" = "sihsim" ]; then
+	sih start
 # only start the simulator if not in replay mode, as both control the lockstep time
-if ! replay tryapplyparams
+elif ! replay tryapplyparams
 then
   . px4-rc.simulator
 fi

ROMFS/px4fmu_common/init.d/airframes/10017_steadidrone_qu4d

@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone QU4D
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 feed-through of RC AUX1 channel
-# @output MAIN6 feed-through of RC AUX2 channel
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 4
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.13
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.004
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.19
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.004
-param set-default MC_YAW_P 4
-
-set MIXER quad_w

ROMFS/px4fmu_common/init.d/airframes/12002_steadidrone_mavrik

@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone MAVRIK
-#
-# @type Octo Coax Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 motor 5
-# @output MAIN6 motor 6
-# @output MAIN7 motor 7
-# @output MAIN8 motor 8
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default MC_PITCH_P 4
-param set-default MC_PITCHRATE_P 0.24
-param set-default MC_PITCHRATE_I 0.09
-param set-default MC_PITCHRATE_D 0.013
-param set-default MC_PITCHRATE_MAX 180
-
-param set-default MC_ROLL_P 4
-param set-default MC_ROLLRATE_P 0.16
-param set-default MC_ROLLRATE_I 0.07
-param set-default MC_ROLLRATE_D 0.009
-param set-default MC_ROLLRATE_MAX 180
-
-param set-default MC_YAW_P 3
-
-param set-default MPC_HOLD_MAX_XY 0.25
-param set-default MPC_THR_MIN 0.15
-param set-default MPC_Z_VEL_MAX_DN 2
-
-param set-default BAT1_N_CELLS 4
-
-set MIXER octo_cox_w
-
-set PWM_OUT 12345678

ROMFS/px4fmu_common/init.d/airframes/13010_claire

@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# @name CruiseAder Claire
-#
-# @type VTOL Tiltrotor
-# @class VTOL
-#
-# @maintainer Samay Siga <samay_s@icloud.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default MAV_TYPE 21
-
-param set-default PWM_AUX_DISARM 1000
-param set-default PWM_AUX_MAX 2000
-param set-default PWM_AUX_MIN 1000
-param set-default PWM_AUX_RATE 50
-
-param set-default PWM_MAIN_MAX 2000
-
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 13
-param set-default VT_IDLE_PWM_MC 1080
-param set-default VT_TILT_FW 0.9
-param set-default VT_TILT_MC 0.08
-param set-default VT_TILT_TRANS 0.5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 1
-
-set MIXER claire
-set MIXER_AUX claire
-
-set PWM_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/13012_convergence

@@ -69,4 +69,9 @@ param set-default VT_TYPE 1
 
 set MIXER vtol_convergence
 
-set PWM_OUT 1234
+if ! ver hwcmp MATEK_H743
+then
+	set PWM_OUT 1234
+else
+	set PWM_OUT 3456
+fi	

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -131,7 +131,6 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
-param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4
 

ROMFS/px4fmu_common/init.d/airframes/3030_io_camflyer

@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name IO Camflyer
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_TRIM 13
-param set-default FW_R_TC 0.3
-param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.74
-param set-default FW_L1_PERIOD 16
-param set-default FW_LND_ANG 15
-param set-default FW_LND_FLALT 5
-param set-default FW_LND_HVIRT 13
-param set-default FW_LND_TLALT 5
-param set-default FW_THR_LND_MAX 0
-param set-default FW_PR_FF 0.35
-param set-default FW_RR_FF 0.6
-param set-default FW_RR_P 0.04
-
-param set-default PWM_MAIN_DISARM 1000
-
-
-set MIXER fw_generic_wing
-
-# Provide ESC a constant 1000 us pulse while disarmed
-set PWM_OUT 4

ROMFS/px4fmu_common/init.d/airframes/3034_fx79

@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# @name FX-79 Buffalo Flying Wing
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 right aileron
-# @output MAIN2 left aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 30
-param set-default FW_AIRSPD_MIN 13
-
-param set-default NAV_LOITER_RAD 150
-
-set MIXER fw_generic_wing

ROMFS/px4fmu_common/init.d/airframes/3035_viper

@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name Viper
-#
-# @type Flying Wing
-# @class Plane
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER Viper

ROMFS/px4fmu_common/init.d/airframes/3037_parrot_disco_mod

@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-# @name Modified Parrot Disco
-#
-# @url
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-####################################
-# Airspeed
-####################################
-param set-default FW_AIRSPD_MAX  27 # = 52 knots
-
-####################################
-# Pitch
-####################################
-
-# Pitch rate feed forward (def = 0.5 %/rad/sec)
-param set-default FW_PR_FF 0.35
-
-####################################
-# Roll
-####################################
-
-# Basic limits (def = 50 deg)
-param set-default FW_R_LIM 40
-
-# Roll rate upper limit (def = 70 deg/s)
-param set-default FW_R_RMAX 50
-
-param set-default PWM_MAIN_DISARM 1000
-
-set MIXER fw_generic_wing.main.mix
-
-# Provide ESC a constant 1000 us pulse
-set PWM_OUT 4

ROMFS/px4fmu_common/init.d/airframes/4010_dji_f330

@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F330 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230

ROMFS/px4fmu_common/init.d/airframes/4011_dji_f450

@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F450 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_YAWRATE_P 0.3
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -104,7 +104,6 @@ param set-default SDLOG_PROFILE 131
 param set-default SENS_CM8JL65_CFG 104
 param set-default SENS_FLOW_MAXHGT 25
 param set-default SENS_FLOW_MINHGT 0.5
-param set-default SENS_FLOW_ROT 0
 param set-default IMU_GYRO_CUTOFF 100
 param set-default SENS_EN_PMW3901 1
 

ROMFS/px4fmu_common/init.d/airframes/4060_dji_matrice_100

@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# @name DJI Matrice 100
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer James Goppert <james.goppert@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 6
-
-param set-default MC_ROLLRATE_P 0.05
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_PITCHRATE_P 0.05
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.001
-
-param set-default MC_YAWRATE_I 0
-
-param set-default PWM_MAIN_MIN 1200

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -47,6 +47,7 @@ param set-default COM_RC_LOSS_T 3
 
 # ekf2
 param set-default EKF2_AID_MASK 33
+param set-default EKF2_TERR_MASK 1
 param set-default EKF2_BARO_DELAY 0
 param set-default EKF2_BARO_NOISE 2.0
 
@@ -173,7 +174,7 @@ param set-default RC1_TRIM          1000
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
 param set-default SENS_FLOW_MAXHGT 5.0
-param set-default SENS_FLOW_ROT    0
+param set-default SENS_FLOW_ROT 0
 
 # ignore the SD card errors and use normal startup sound
 set STARTUP_TUNE "1"

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -52,22 +52,16 @@ px4_add_romfs_files(
 
 	# [3000, 3999] Flying wing"
 	3000_generic_wing
-	3030_io_camflyer
 	3031_phantom
 	3032_skywalker_x5
 	3033_wingwing
-	3034_fx79
-	3035_viper
 	3036_pigeon
-	3037_parrot_disco_mod
 	3100_tbs_caipirinha
 
 	# [4000, 4999] Quadrotor x"
 	4001_quad_x
 	4003_qavr5
 	4009_qav250
-	4010_dji_f330
-	4011_dji_f450
 	4014_s500
 	4015_holybro_s500
 	4016_holybro_px4vision
@@ -81,7 +75,6 @@ px4_add_romfs_files(
 	4051_s250aq
 	4052_holybro_qav250
 	4053_holybro_kopis2
-	4060_dji_matrice_100
 	4061_atl_mantis_edu
 	4071_ifo
 	4072_draco
@@ -112,7 +105,6 @@ px4_add_romfs_files(
 	# [10000, 10999] Quadrotor Wide arm / H frame"
 	10015_tbs_discovery
 	10016_3dr_iris
-	10017_steadidrone_qu4d
 	10018_tbs_endurance
 
 	# [11000, 11999] Hexa Cox
@@ -120,7 +112,6 @@ px4_add_romfs_files(
 
 	# [12000, 12999] Octo Cox
 	12001_octo_cox
-	12002_steadidrone_mavrik
 
 	# [13000, 13999] VTOL
 	13000_generic_vtol_standard
@@ -133,7 +124,6 @@ px4_add_romfs_files(
 	13007_vtol_AAVVT_quad
 	13008_QuadRanger
 	13009_vtol_spt_ranger
-	13010_claire
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark

ROMFS/px4fmu_common/init.d/rcS

@@ -21,7 +21,6 @@ set +e
 # it wastes flash
 #
 set R /
-set AUTOCNF no
 set FCONFIG /fs/microsd/etc/config.txt
 set FEXTRAS /fs/microsd/etc/extras.txt
 set FRC /fs/microsd/etc/rc.txt
@@ -177,13 +176,12 @@ else
 	fi
 
 	#
-	# Set AUTOCNF flag to use it in AUTOSTART scripts.
+	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
-		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
-		set AUTOCNF yes
+		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	fi
 
 	#
@@ -274,14 +272,6 @@ else
 		. $FCONFIG
 	fi
 
-	#
-	# If autoconfig parameter was set, reset it and save parameters.
-	#
-	if [ $AUTOCNF = yes ]
-	then
-		param set SYS_AUTOCONFIG 0
-	fi
-
 	#
 	# Check if UAVCAN is enabled, default to it for ESCs.
 	#
@@ -298,9 +288,9 @@ else
 			tune_control play error
 		fi
 	else
-		if param greater -s UAVCAN_V1_ENABLE 0
+		if param greater -s CYPHAL_ENABLE 0
 		then
-			uavcan_v1 start
+			cyphal start
 		fi
 	fi
 
@@ -565,7 +555,6 @@ fi
 # Unset all script parameters to free RAM.
 #
 unset R
-unset AUTOCNF
 unset FCONFIG
 unset FEXTRAS
 unset FRC

ROMFS/px4fmu_common/mixers-sitl/plane_sitl.main.mix

@@ -21,14 +21,16 @@ O:      10000  10000      0 -10000  10000
 S: 0 3      0  20000 -10000 -10000  10000
 
 # mixer for the left aileron
-M: 1
+M: 2
 O:      10000  10000   0 -10000  10000
 S: 0 0  -10000  -10000    0 -10000  10000
+S: 0 5   10000   10000    0 -10000  10000
 
 # mixer for the right aileron
-M: 1
+M: 2
 O:      10000  10000   0 -10000  10000
 S: 0 0  10000  10000    0 -10000  10000
+S: 0 5  10000  10000    0 -10000  10000
 
 # mixer for the elevator
 M: 1

ROMFS/px4fmu_common/mixers-sitl/tiltrotor_sitl.main.mix

@@ -8,22 +8,22 @@ R: 4x
 # tilt servo motor 1
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # tilt servo motor 2
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # tilt servo motor 3
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # tilt servo motor 4
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # mixer for the left aileron
 M: 1

ROMFS/px4fmu_common/mixers/AAERTWF.main.mix

@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -20,11 +20,11 @@ endpoints to suit.
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 Elevator mixer
 ------------

ROMFS/px4fmu_common/mixers/AAVVTWFF.main.mix

@@ -11,7 +11,7 @@ to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,11 +21,11 @@ endpoints to suit.
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_common/mixers/AAVVTWFF_vtail.main.mix

@@ -9,20 +9,20 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw), 3 (thrust) 4 (flaps), 5 (spoiler).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up mechanically reversed.
 
 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_common/mixers/CMakeLists.txt

@@ -40,8 +40,6 @@ px4_add_romfs_files(
 	babyshark.main.mix
 	blade130.main.mix
 	CCPM.main.mix
-	claire.aux.mix
-	claire.main.mix
 	cloudship.main.mix
 	coax.main.mix
 	delta.main.mix
@@ -83,7 +81,6 @@ px4_add_romfs_files(
 	tri_y_yaw-.main.mix
 	uuv_x.main.mix
 	vectored6dof.main.mix
-	Viper.main.mix
 	vtol_AAERT.aux.mix
 	vtol_AAVVT.aux.mix
 	vtol_TTTTAAER.aux.mix

ROMFS/px4fmu_common/mixers/Viper.main.mix

@@ -1,66 +0,0 @@
-Viper Delta-wing mixer
-=================================
-# @board px4_fmu-v2 exclude
-
-Designed for Viper.
-
-TODO (sjwilks): Add mixers for flaps.
-
-This file defines mixers suitable for controlling a delta wing aircraft using
-PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
-servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
-assumed to be unused.
-
-Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch) and 3 (thrust).
-
-See the README for more information on the scaler format.
-
-Elevon mixers
--------------
-Three scalers total (output, roll, pitch).
-
-On the assumption that the two elevon servos are physically reversed, the pitch
-input is inverted between the two servos.
-
-The scaling factor for roll inputs is adjusted to implement differential travel
-for the elevons.
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1   8000   8000      0 -10000  10000
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1  -8000  -8000      0 -10000  10000
-
-Output 2
---------
-This mixer is empty.
-
-Z:
-
-Motor speed mixer
------------------
-Two scalers total (output, thrust).
-
-This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
-range.  Inputs below zero are treated as zero.
-
-M: 1
-S: 0 3      0  20000 -10000 -10000  10000
-
-Inputs to the mixer come from channel group 2 (payload), channels 0
-(bay servo 1), 1 (bay servo 2) and 3 (drop release).
------------------------------------------------------
-
-M: 1
-S: 2 0  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 1  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 2  -8000  -8000      0 -10000  10000
-
-

ROMFS/px4fmu_common/mixers/claire.aux.mix

@@ -1,28 +0,0 @@
-# mixer for the CruiseAder Claire tilt mechansim servo and elevons
-
-=======================================================================
-
-
-Tilt mechanism servo mixer
-
----------------------------
-
-M: 1
-
-
-S: 1 4  10000  10000      0 -10000  10000
-
-
-
-Elevon mixers
-
--------------
-
-M: 2
-
-S: 1 0   7500   7500      0 -10000  10000
-S: 1 1   7500   7500      0 -10000  10000
-
-M: 2
-S: 1 0    7500    7500    0 -10000  10000
-S: 1 1   -7500   -7500    0 -10000  10000

ROMFS/px4fmu_common/mixers/claire.main.mix

@@ -1,8 +0,0 @@
-# CruiseAder Claire Main Multirotor mixer for PX4FMU
-# @board px4_fmu-v2 exclude
-
-#
-
-#===========================
-
-R: 4x

ROMFS/px4fmu_common/mixers/firefly6.aux.mix

@@ -6,7 +6,7 @@
 Tilt mechanism servo mixer
 ---------------------------
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 Elevon mixers
 -------------

ROMFS/px4fmu_common/mixers/vtol_AAVVT.aux.mix

@@ -5,14 +5,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU
 
 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU 
+The configuration assumes the aileron servos are connected to PX4FMU
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,11 +22,11 @@ endpoints to suit.
 
 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 6  10000  10000      0 -10000  10000
+S: 1 5  10000  10000      0 -10000  10000
 
 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 6 -10000 -10000      0 -10000  10000
+S: 1 5 -10000 -10000      0 -10000  10000
 
 
 V-tail mixers

ROMFS/px4fmu_common/mixers/vtol_TTTTAAER.aux.mix

@@ -6,19 +6,19 @@
 ---------------------------
 # front left up:2000 down:1000
 M: 1
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 
 # front right up:1000 down:2000
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 # rear left up:2000 down:1000
 M: 1
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 
 # rear right up:1000 down:2000
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 
 
 # Aileron mixer

ROMFS/px4fmu_common/mixers/vtol_convergence.main.mix

@@ -10,12 +10,12 @@ Tilt mechanism servo mixer
 ---------------------------
 #RIGHT up:2000 down:1000
 M: 2
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 Elevon mixers

ROMFS/px4fmu_test/mixers/AAERTWF.main.mix

@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 Elevator mixer
 ------------

ROMFS/px4fmu_test/mixers/AAVVTWFF.main.mix

@@ -9,9 +9,9 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,12 +22,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000
 
 V-tail mixers
 -------------

ROMFS/px4fmu_test/mixers/vtol2_test.mix

@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0 -20000   9000 -10000  10000
+S: 1 8      0 -20000   9000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000  -10000 -10000  10000
+S: 1 8      0  20000  -10000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000
 
 Elevon mixers

ROMFS/px4fmu_test/mixers/vtol_AAVVT.aux.mix

@@ -3,14 +3,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU
 
 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU 
+The configuration assumes the aileron servos are connected to PX4FMU
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.
 
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).
 
-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------
 
 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 6  10000  10000      0 -10000  10000
+S: 1 5  10000  10000      0 -10000  10000
 
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 6 -10000 -10000      0 -10000  10000
+S: 1 5 -10000 -10000      0 -10000  10000
 
 
 V-tail mixers

ROMFS/px4fmu_test/mixers/vtol_convergence.main.mix

@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000
 
 Elevon mixers

Tools/HIL/run_nsh_cmd.py

@@ -95,7 +95,7 @@ def do_nsh_cmd(port_url, baudrate, cmd):
 
 
     timeout_start = time.monotonic()
-    timeout = 240 # 4 minutes
+    timeout = 600 # 10 minutes
 
     return_code = 0
 

Tools/astyle/files_to_check_code_style.sh

@@ -13,8 +13,7 @@ exec find boards msg src platforms test \
     -path platforms/qurt/dspal -prune -o \
     -path src/drivers/uavcan/libuavcan -prune -o \
     -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
-    -path src/drivers/uavcan_v1/libcanard -prune -o \
-    -path src/drivers/uavcannode_gps_demo/libcanard -prune -o \
+    -path src/drivers/cyphal/libcanard -prune -o \
     -path src/lib/crypto/monocypher -prune -o \
     -path src/lib/events/libevents -prune -o \
     -path src/lib/parameters/uthash -prune -o \

Tools/jmavsim_run.sh

@@ -5,12 +5,13 @@ set -e
 SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
 cd "$SCRIPT_DIR/jMAVSim"
 
-tcp_port=4560
+port=4560
 extra_args=
 baudrate=921600
 device=
 ip="127.0.0.1"
-while getopts ":b:d:p:qsr:f:i:loat" opt; do
+protocol="tcp"
+while getopts ":b:d:u:p:qsr:f:i:loat" opt; do
 	case $opt in
 		b)
 			baudrate=$OPTARG
@@ -18,11 +19,14 @@ while getopts ":b:d:p:qsr:f:i:loat" opt; do
 		d)
 			device="$OPTARG"
 			;;
+		u)
+			protocol="udp"
+			;;
 		i)
 			ip="$OPTARG"
 			;;
 		p)
-			tcp_port=$OPTARG
+			port=$OPTARG
 			;;
 		q)
 			extra_args="$extra_args -qgc"
@@ -53,7 +57,11 @@ while getopts ":b:d:p:qsr:f:i:loat" opt; do
 done
 
 if [ "$device" == "" ]; then
-	device="-tcp $ip:$tcp_port"
+	if [ "$protocol" == "tcp" ]; then
+		device="-tcp $ip:$port"
+	else
+		device="-udp $port"
+	fi
 else
 	device="-serial $device $baudrate"
 fi

Tools/kconfig/board_cmake_to_kconfig.py

@@ -1,72 +0,0 @@
-#!/bin/python3
-
-import parse_cmake.parsing as cmp
-import glob
-import pprint
-import re
-import os
-
-__location__ = os.path.realpath(
-    os.path.join(os.getcwd(), os.path.dirname(__file__)))
-
-serial_regex = r"(\D\D\D\d):(/dev/ttyS\d+)"
-io_regex = r"IO (.*)"
-romfs_regex = r"ROMFSROOT (.*)"
-arch_regex = r"ARCHITECTURE (.*)"
-toolchain_regex = r"TOOLCHAIN (.*)"
-
-
-
-def stripComments(code):
-    code = str(code)
-    return re.sub(r'(?m) *#.*\n?', '', code)
-
-lut = {}
-with open(os.path.join(__location__, "cmake_kconfig_lut.txt"),'r') as lookup:
-    for line in lookup:
-        if ',' in line:
-            key, value = line.strip().split(',')
-            lut[key] = value
-
-#for name in glob.glob('boards/*/*/*.cmake'):
-px4_dir = os.path.abspath(os.path.join(os.path.dirname(__file__), '../../'))
-
-for name in glob.glob(px4_dir + '/boards/*/*/*.cmake'):
-    print(name)
-    with open(name, 'r') as f:
-        romfs_set = False
-        w = open(name.replace(".cmake",".px4board"), "w")
-        for line in f:
-            clean_line = stripComments(line.strip())
-            value = lut.get(clean_line)
-            if value is not None:
-                print(value, file=w)
-                print(value)
-            else:
-                matches = re.finditer(serial_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_SERIAL_" + match.groups()[0] + "=\"" + match.groups()[1] + "\"")
-                    print("CONFIG_BOARD_SERIAL_" + match.groups()[0] + "=\"" + match.groups()[1] + "\"", file=w)
-                matches = re.finditer(io_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_IO=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_IO=\"" + match.groups()[0] + "\"", file=w)
-                matches = re.finditer(romfs_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_ROMFSROOT=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_ROMFSROOT=\"" + match.groups()[0] + "\"", file=w)
-                    romfs_set = True
-                matches = re.finditer(arch_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_ARCHITECTURE=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_ARCHITECTURE=\"" + match.groups()[0] + "\"", file=w)
-                matches = re.finditer(toolchain_regex, clean_line, re.MULTILINE)
-                for matchNum, match in enumerate(matches, start=1):
-                    print("CONFIG_BOARD_TOOLCHAIN=\"" + match.groups()[0] + "\"")
-                    print("CONFIG_BOARD_TOOLCHAIN=\"" + match.groups()[0] + "\"", file=w)
-
-    if(romfs_set == False):
-        print("CONFIG_BOARD_ROMFSROOT=\"\"", file=w)
-
-
-    w.close()

Tools/kconfig/cmake_kconfig_lut.txt

@@ -1,204 +0,0 @@
-PLATFORM nuttx,CONFIG_PLATFORM_NUTTX=y
-PLATFORM posix,CONFIG_PLATFORM_POSIX=y
-CONSTRAINED_MEMORY,CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONSTRAINED_FLASH,CONFIG_BOARD_CONSTRAINED_FLASH=y
-NO_HELP,CONFIG_BOARD_NO_HELP=y
-EXTERNAL_METADATA,CONFIG_BOARD_EXTERNAL_METADATA=y
-BUILD_BOOTLOADER,CONFIG_BOARD_BUILD_BOOTLOADER=y
-UAVCAN_INTERFACES 2,CONFIG_BOARD_UAVCAN_INTERFACES=2
-UAVCAN_INTERFACES 1,CONFIG_BOARD_UAVCAN_INTERFACES=1
-UAVCAN_TIMER_OVERRIDE 2,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
-UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=1
-UAVCAN_TIMER_OVERRIDE 1,CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=0
-TESTING,CONFIG_BOARD_TESTING=y
-ETHERNET,CONFIG_BOARD_ETHERNET=y
-adc/ads1115,CONFIG_DRIVERS_ADC_ADS1115=y
-adc/board_adc,CONFIG_DRIVERS_ADC_BOARD_ADC=y
-barometer,CONFIG_COMMON_BAROMETERS=y
-barometer/bmp280,CONFIG_DRIVERS_BAROMETER_BMP280=y
-barometer/bmp388,CONFIG_DRIVERS_BAROMETER_BMP388=y
-barometer/dps310,CONFIG_DRIVERS_BAROMETER_DPS310=y
-barometer/lps22hb,CONFIG_DRIVERS_BAROMETER_LPS22HB=y
-barometer/lps25h,CONFIG_DRIVERS_BAROMETER_LPS25H=y
-barometer/lps33hw,CONFIG_DRIVERS_BAROMETER_LPS33HW=y
-barometer/mpl3115a2,CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
-barometer/ms5611,CONFIG_DRIVERS_BAROMETER_MS5611=y
-barometer/tcbp001ta,CONFIG_DRIVERS_BAROMETER_TCBP001TA=y
-batt_smbus,CONFIG_DRIVERS_BATT_SMBUS=y
-bootloaders,CONFIG_DRIVERS_BOOTLOADERS=y
-camera_capture,CONFIG_DRIVERS_CAMERA_CAPTURE=y
-camera_trigger,CONFIG_DRIVERS_CAMERA_TRIGGER=y
-differential_pressure,CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE=y
-distance_sensor,CONFIG_COMMON_DISTANCE_SENSOR=y
-distance_sensor/ll40ls,CONFIG_DRIVERS_DISTANCE_SENSOR_LL40LS=y
-distance_sensor/lightware_laser_serial,CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_SERIAL=y
-distance_sensor/broadcom/afbrs50,CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
-distance_sensor/vl53l0x,CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
-distance_sensor/vl53l1x,CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L1X=y
-distance_sensor/srf05,CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
-dshot,CONFIG_DRIVERS_DSHOT=y
-gps,CONFIG_DRIVERS_GPS=y
-heater,CONFIG_DRIVERS_HEATER=y
-imu,CONFIG_COMMON_IMU=y
-imu/adis16477,CONFIG_DRIVERS_IMU_ADIS16477=y
-imu/adis16497,CONFIG_DRIVERS_IMU_ADIS16497=y
-imu/analog_devices/adis16448,CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
-imu/analog_devices/adis16470,CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16470=y
-imu/bosch/bmi055,CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
-imu/bosch/bmi088,CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
-imu/fxas21002c,CONFIG_DRIVERS_IMU_FXAS21002C=y
-imu/fxos8701cq,CONFIG_DRIVERS_IMU_FXOS8701CQ=y
-imu/invensense/icm20602,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
-imu/invensense/icm20608g,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20608G=y
-imu/invensense/icm20649,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20649=y
-imu/invensense/icm20689,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
-imu/invensense/icm20948,CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
-imu/invensense/icm40609d,CONFIG_DRIVERS_IMU_INVENSENSE_ICM40609D=y
-imu/invensense/icm42605,CONFIG_DRIVERS_IMU_INVENSENSE_ICM42605=y
-imu/invensense/icm42688p,CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
-imu/invensense/mpu6000,CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
-imu/invensense/mpu6500,CONFIG_DRIVERS_IMU_INVENSENSE_MPU6500=y
-imu/invensense/mpu9250,CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
-imu/l3gd20,CONFIG_DRIVERS_IMU_L3GD20=y
-imu/lsm303d,CONFIG_DRIVERS_IMU_LSM303D=y
-imu/st,CONFIG_DRIVERS_IMU_ST=y
-irlock,CONFIG_DRIVERS_IRLOCK=y
-lights,CONFIG_COMMON_LIGHT=y
-lights/neopixel,CONFIG_DRIVERS_LIGHTS_NEOPIXEL=y
-lights/rgbled,CONFIG_DRIVERS_LIGHTS_RGBLED=y
-lights/rgbled_ncp5623c,CONFIG_DRIVERS_LIGHTS_RGBLED_NCP5623C=y
-lights/rgbled_pwm,CONFIG_DRIVERS_LIGHTS_RGBLED_PWM=y
-magnetometer,CONFIG_COMMON_MAGNETOMETER=y
-magnetometer/akm/ak09916,CONFIG_DRIVERS_MAGNETOMETER_AKM_AK09916=y
-magnetometer/akm/ak8963,CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
-magnetometer/bosch/bmm150,CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
-magnetometer/hmc5883,CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
-magnetometer/isentek/ist8308,CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8308=y
-magnetometer/isentek/ist8310,CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
-magnetometer/lis2mdl,CONFIG_DRIVERS_MAGNETOMETER_LIS2MDL=y
-magnetometer/lis3mdl,CONFIG_DRIVERS_MAGNETOMETER_LIS3MDL=y
-magnetometer/lsm303agr,CONFIG_DRIVERS_MAGNETOMETER_LSM303AGR=y
-magnetometer/lsm9ds1_mag,CONFIG_DRIVERS_MAGNETOMETER_LSM9DS1_MAG=y
-magnetometer/qmc5883l,CONFIG_DRIVERS_MAGNETOMETER_QMC5883L=y
-magnetometer/rm3100,CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
-magnetometer/vtrantech/vcm1193l,CONFIG_DRIVERS_MAGNETOMETER_VTRANTECH_VCM1193L=y
-optical_flow,CONFIG_COMMON_OPTICAL_FLOW=y
-optical_flow/paw3902,CONFIG_DRIVERS_OPTICAL_FLOW_PAW3902=y
-optical_flow/paw3901,CONFIG_DRIVERS_OPTICAL_FLOW_PMW3901=y
-optical_flow/px4flow,CONFIG_DRIVERS_OPTICAL_FLOW_PX4FLOW=y
-optical_flow/thoneflow,CONFIG_DRIVERS_OPTICAL_FLOW_THONEFLOW=y
-osd,CONFIG_DRIVERS_OSD=y
-pca9685,CONFIG_DRIVERS_PCA9685=y
-pca9685_pwm_out,CONFIG_DRIVERS_PCA9685_PWM_OUT=y
-power_monitor/ina226,CONFIG_DRIVERS_POWER_MONITOR_INA226=y
-power_monitor/voxlpm,CONFIG_DRIVERS_POWER_MONITOR_VOXLPM=y
-pps_capture,CONFIG_DRIVERS_PPS_CAPTURE=y
-protocol_splitter,CONFIG_DRIVERS_PROTOCOL_SPLITTER=y
-pwm_input,CONFIG_DRIVERS_PWM_INPUT=y
-pwm_out_sim,CONFIG_DRIVERS_PWM_OUT_SIM=y
-pwm_out,CONFIG_DRIVERS_PWM_OUT=y
-px4io,CONFIG_DRIVERS_PX4IO=y
-rc_input,CONFIG_DRIVERS_RC_INPUT=y
-roboclaw,CONFIG_DRIVERS_ROBOCLAW=y
-rpi_rc_in,CONFIG_DRIVERS_RPI_RC_IN=y
-rpm,CONFIG_DRIVERS_RPM=y
-safety_button,CONFIG_DRIVERS_SAFETY_BUTTON=y
-smart_battery/batmon,CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
-spektrum_rc,CONFIG_DRIVERS_SPEKTRUM_RC=y
-telemetry,CONFIG_DRIVERS_TELEMETRY=y
-test_ppm,CONFIG_DRIVERS_TEST_PPM=y
-tone_alarm,CONFIG_DRIVERS_TONE_ALARM=y
-uavcan,CONFIG_DRIVERS_UAVCAN=y
-uavcannode,CONFIG_DRIVERS_UAVCANNODE=y
-uavcannode_gps_demo,CONFIG_DRIVERS_UAVCANNODE_GPS_DEMO=y
-airship_att_control,CONFIG_MODULES_AIRSHIP_ATT_CONTROL=y
-airspeed_selector,CONFIG_MODULES_AIRSPEED_SELECTOR=y
-velocity_controller,CONFIG_MODULES_ANGULAR_VELOCITY_CONTROLLER=y
-attitude_estimator_q,CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
-battery_status,CONFIG_MODULES_BATTERY_STATUS=y
-camera_feedback,CONFIG_MODULES_CAMERA_FEEDBACK=y
-commander,CONFIG_MODULES_COMMANDER=y
-control_allocator,CONFIG_MODULES_CONTROL_ALLOCATOR=y
-dataman,CONFIG_MODULES_DATAMAN=y
-ekf2,CONFIG_MODULES_EKF2=y
-esc_battery,CONFIG_MODULES_ESC_BATTERY=y
-events,CONFIG_MODULES_EVENTS=y
-flight_mode_manager,CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-fw_att_control,CONFIG_MODULES_FW_ATT_CONTROL=y
-fw_pos_control_l1,CONFIG_MODULES_FW_POS_CONTROL_L1=y
-gyro_calibration,CONFIG_MODULES_GYRO_CALIBRATION=y
-gyro_fft,CONFIG_MODULES_GYRO_FFT=y
-land_detector,CONFIG_MODULES_LAND_DETECTOR=y
-landing_target_estimator,CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
-load_mon,CONFIG_MODULES_LOAD_MON=y
-local_position_estimator,CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
-logger,CONFIG_MODULES_LOGGER=y
-mavlink,CONFIG_MODULES_MAVLINK=y
-mc_att_control,CONFIG_MODULES_MC_ATT_CONTROL=y
-mc_hover_thrust_estimator,CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
-mc_pos_control,CONFIG_MODULES_MC_POS_CONTROL=y
-mc_rate_control,CONFIG_MODULES_MC_RATE_CONTROL=y
-micrortps_bridge,CONFIG_MODULES_MICRORTPS_BRIDGE=y
-microdds_client,CONFIG_MODULES_MICRODDS_CLIENT=y
-navigator,CONFIG_MODULES_NAVIGATOR=y
-px4iofirmware,CONFIG_MODULES_PX4IOFIRMWARE=y
-rc_update,CONFIG_MODULES_RC_UPDATE=y
-replay,CONFIG_MODULES_REPLAY=y
-rover_pos_control,CONFIG_MODULES_ROVER_POS_CONTROL=y
-sensors,CONFIG_MODULES_SENSORS=y
-sih,CONFIG_MODULES_SIH=y
-simulator,CONFIG_MODULES_SIMULATOR=y
-temperature_compensation,CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-uuv_att_control,CONFIG_MODULES_UUV_ATT_CONTROL=y
-uuv_pos_control,CONFIG_MODULES_UUV_POS_CONTROL=y
-gimbal,CONFIG_MODULES_GIMBAL=y
-vtol_att_control,CONFIG_MODULES_VTOL_ATT_CONTROL=y
-bl_update,CONFIG_SYSTEMCMDS_BL_UPDATE=y
-dmesg,CONFIG_SYSTEMCMDS_DMESG=y
-dumpfile,CONFIG_SYSTEMCMDS_DUMPFILE=y
-dyn,CONFIG_SYSTEMCMDS_DYN=y
-failure,CONFIG_SYSTEMCMDS_FAILURE=y
-gpio,CONFIG_SYSTEMCMDS_GPIO=y
-hardfault_log,CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-i2cdetect,CONFIG_SYSTEMCMDS_I2CDETECT=y
-led_control,CONFIG_SYSTEMCMDS_LED_CONTROL=y
-mft,CONFIG_SYSTEMCMDS_MFT=y
-microbench,CONFIG_SYSTEMCMDS_MICROBENCH=y
-mixer,CONFIG_SYSTEMCMDS_MIXER=y
-motor_test,CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-mtd,CONFIG_SYSTEMCMDS_MTD=y
-netman,CONFIG_SYSTEMCMDS_NETMAN=y
-nshterm,CONFIG_SYSTEMCMDS_NSHTERM=y
-param,CONFIG_SYSTEMCMDS_PARAM=y
-perf,CONFIG_SYSTEMCMDS_PERF=y
-pwm,CONFIG_SYSTEMCMDS_PWM=y
-reboot,CONFIG_SYSTEMCMDS_REBOOT=y
-reflect,CONFIG_SYSTEMCMDS_REFLECT=y
-sd_bench,CONFIG_SYSTEMCMDS_SD_BENCH=y
-serial_tet,CONFIG_SYSTEMCMDS_SERIAL_TEST=y
-shutdown,CONFIG_SYSTEMCMDS_SHUTDOWN=y
-system_time,CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
-tests,CONFIG_SYSTEMCMDS_TESTS=y
-top,CONFIG_SYSTEMCMDS_TOP=y
-topic_listener,CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
-tune_control,CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
-uorb,CONFIG_SYSTEMCMDS_UORB=y
-usb_connected,CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-ver,CONFIG_SYSTEMCMDS_VER=y
-work_queue,CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-dyn_hello,CONFIG_EXAMPLES_DYN_HELLO=y
-fake_gps,CONFIG_EXAMPLES_FAKE_GPS=y
-fake_gyro,CONFIG_EXAMPLES_FAKE_GYRO=y
-fake_imu,CONFIG_EXAMPLES_FAKE_IMU=y
-fake_magnetometer,CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
-fixedwing_control,CONFIG_EXAMPLES_FIXEDWING_CONTROL=y
-hello,CONFIG_EXAMPLES_HELLO=y
-hwtest,CONFIG_EXAMPLES_HWTEST=y
-matlab_csv_serial,CONFIG_EXAMPLES_MATLAB_CSV_SERIAL=y
-px4_mavlink_debug,CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
-px4_simple_app,CONFIG_EXAMPLES_PX4_SIMPLE_APP=y
-rover_steering_control,CONFIG_EXAMPLES_ROVER_STEERING_CONTROL=y
-uuv_example_app,CONFIG_EXAMPLES_UUV_EXAMPLE_APP=y
-work_item,CONFIG_EXAMPLES_WORK_ITEM=y
-add_compile_options(-Wno-narrowing),CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
--D__PX4_LINUX,CONFIG_BOARD_LINUX=y

Tools/px4moduledoc/srcparser.py

@@ -16,7 +16,7 @@ class ModuleDocumentation(object):
     valid_categories = ['driver', 'estimator', 'controller', 'system',
                         'communication', 'command', 'template', 'simulation', 'autotune']
     valid_subcategories = ['', 'distance_sensor', 'imu', 'airspeed_sensor',
-                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor']
+                           'magnetometer', 'baro', 'optical_flow', 'rpm_sensor', 'transponder']
 
     max_line_length = 80 # wrap lines that are longer than this
 

Tools/setup/ubuntu.sh

@@ -200,13 +200,12 @@ if [[ $INSTALL_SIM == "true" ]]; then
 
 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		java_version=11
-		gazebo_version=9
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		java_version=13
-		gazebo_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		java_version=11
 	else
 		java_version=14
-		gazebo_version=11
 	fi
 	# Java (jmavsim or fastrtps)
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -220,20 +219,30 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
 
 	# Gazebo
+	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+		gazebo_version=9
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		gazebo_packages="gazebo libgazebo-dev"
+	else
+		# default and Ubuntu 20.04
+		gazebo_version=11
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	fi
+
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
 	sudo apt-get update -y --quiet
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		dmidecode \
-		gazebo$gazebo_version \
+		$gazebo_packages \
 		gstreamer1.0-plugins-bad \
 		gstreamer1.0-plugins-base \
 		gstreamer1.0-plugins-good \
 		gstreamer1.0-plugins-ugly \
 		gstreamer1.0-libav \
 		libeigen3-dev \
-		libgazebo$gazebo_version-dev \
 		libgstreamer-plugins-base1.0-dev \
 		libimage-exiftool-perl \
 		libopencv-dev \

Tools/sitl_gazebo

@@ -1 +1 @@
-Subproject commit 48440d7b5c78a21182415266334981f1163f4b2c
+Subproject commit 5610c3fb441a2f3babc8ad7a63c8c4ce3e40abfa

Tools/sitl_run.sh

@@ -74,6 +74,9 @@ if [ "$model" == "" ] || [ "$model" == "none" ]; then
 	if [ "$program" == "jsbsim" ]; then
 		echo "empty model, setting rascal as default for jsbsim"
 		model="rascal"
+	elif [ "$program" == "sihsim" ]; then
+		echo "empty model, setting quadx as default for sihsim"
+		model="quadx"
 	else
 		echo "empty model, setting iris as default"
 		model="iris"
@@ -214,6 +217,12 @@ elif [ "$program" == "jsbsim" ] && [ -z "$no_sim" ]; then
 	fi
 	"${build_path}/build_jsbsim_bridge/jsbsim_bridge" ${model} -s "${src_path}/Tools/jsbsim_bridge/scene/${world}.xml" 2> /dev/null &
 	JSBSIM_PID=$!
+elif [ "$program" == "sihsim" ] && [ ! -n "$no_sim" ]; then
+	export SIM_MODE="sihsim"
+	if [ "$model" != "airplane" ] && [ "$model" != "quadx" ] && [ "$model" != "xvert" ]; then
+		echo "Model ${model} not compatible with with sih. sih supports [quadx,airplane,xvert]."
+		exit 1
+	fi
 fi
 
 pushd "$rootfs" >/dev/null

boards/ark/can-flow/default.px4board

@@ -2,6 +2,7 @@ CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_ROMFSROOT="cannode"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
@@ -10,7 +11,16 @@ CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_OPTICAL_FLOW_PAW3902=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
+# CONFIG_SENSORS_VEHICLE_MAGNETOMETER is not set
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/ark/can-flow/init/rc.board_sensors

@@ -3,6 +3,8 @@
 # board sensors init
 #------------------------------------------------------------------------------
 
+param set-default IMU_GYRO_RATEMAX 1000
+
 # Internal SPI
 paw3902 -s start -Y 180
 

boards/ark/can-gps/default.px4board

@@ -4,7 +4,6 @@ CONFIG_BOARD_ROMFSROOT="cannode"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_BOARD_EXTERNAL_METADATA=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
@@ -14,5 +13,18 @@ CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
 CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/ark/can-gps/init/rc.board_defaults

@@ -4,6 +4,7 @@
 #------------------------------------------------------------------------------
 
 param set-default CBRK_IO_SAFETY 0
+param set-default MBE_ENABLE 1
 
 safety_button start
 tone_alarm start

boards/ark/can-rtk-gps/default.px4board

@@ -4,7 +4,6 @@ CONFIG_BOARD_ROMFSROOT="cannode"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
-CONFIG_BOARD_EXTERNAL_METADATA=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
@@ -14,5 +13,18 @@ CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
 CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/ark/can-rtk-gps/init/rc.board_defaults

@@ -5,6 +5,7 @@
 
 param set-default CBRK_IO_SAFETY 0
 param set-default CANNODE_GPS_RTCM 1
+param set-default MBE_ENABLE 1
 
 safety_button start
 tone_alarm start

boards/bitcraze/crazyflie/default.px4board

@@ -30,6 +30,7 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_MFT=y

boards/bitcraze/crazyflie/src/board_config.h

@@ -141,6 +141,7 @@
 #define PX4_PWM_ALTERNATE_RANGES
 #define PWM_LOWEST_MIN 0
 #define PWM_MOTOR_OFF	0
+#define PWM_SERVO_STOP	0
 #define PWM_DEFAULT_MIN 20
 #define PWM_HIGHEST_MIN 0
 #define PWM_HIGHEST_MAX 255

boards/bitcraze/crazyflie21/default.px4board

@@ -30,6 +30,7 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_MIXER=y

boards/bitcraze/crazyflie21/src/board_config.h

@@ -142,6 +142,7 @@
 #define PX4_PWM_ALTERNATE_RANGES
 #define PWM_LOWEST_MIN 0
 #define PWM_MOTOR_OFF	0
+#define PWM_SERVO_STOP	0
 #define PWM_DEFAULT_MIN 20
 #define PWM_HIGHEST_MIN 0
 #define PWM_HIGHEST_MAX 255

boards/cuav/can-gps-v1/default.px4board

@@ -1,6 +1,8 @@
 CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-DUSE_S_RGB_LED_DMA"
 CONFIG_DRIVERS_BAROMETER_MS5611=y
@@ -12,5 +14,16 @@ CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
 CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/cuav/x7pro/default.px4board

@@ -106,3 +106,4 @@ CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
 CONFIG_EXAMPLES_FAKE_GPS=y
+#CONFIG_DRIVERS_TRANSPONDER_SAGETECH_MXS=y

boards/cuav/x7pro/nuttx-config/nsh/defconfig

@@ -60,6 +60,7 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
+CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y

boards/cuav/x7pro/nuttx-config/test/defconfig

@@ -0,0 +1,245 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/x7pro/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743XI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004c
+CONFIG_CDCACM_PRODUCTSTR="PX4 CUAV X7Pro"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3163
+CONFIG_CDCACM_VENDORSTR="CUAV"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_EXAMPLES_CALIB_UDELAY=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_REGIONS=4
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_DISABLE_IFCONFIG=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_DISABLE_TELNETD=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SDMMC1_SDIO_PULLUP=y
+CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C3=y
+CONFIG_STM32H7_I2C4=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_HSECLOCK=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC1=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI1_DMA=y
+CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI4=y
+CONFIG_STM32H7_SPI4_DMA=y
+CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI5=y
+CONFIG_STM32H7_SPI6=y
+CONFIG_STM32H7_SPI6_DMA=y
+CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI_DMA=y
+CONFIG_STM32H7_TIM12=y
+CONFIG_STM32H7_TIM15=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM3=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM5=y
+CONFIG_STM32H7_TIM8=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TESTING_OSTEST=y
+CONFIG_TESTING_OSTEST_FPUTESTDISABLE=y
+CONFIG_TESTING_OSTEST_STACKSIZE=10240
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGTSTP=y
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_SERIAL_CONSOLE=y
+CONFIG_UART7_TXBUFSIZE=1500
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=1500
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_TXBUFSIZE=1500
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_IFLOWCONTROL=y
+CONFIG_USART6_OFLOWCONTROL=y
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y

boards/cuav/x7pro/test.px4board

@@ -4,6 +4,7 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
+CONFIG_DRIVERS_UAVCAN=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_ROVER_POS_CONTROL=n

boards/cubepilot/cubeorange/default.px4board

@@ -7,7 +7,7 @@ CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
-CONFIG_COMMON_BAROMETERS=y
+CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
@@ -24,14 +24,13 @@ CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
 CONFIG_DRIVERS_OSD=y
-CONFIG_DRIVERS_PCA9685=y
 CONFIG_DRIVERS_PCA9685_PWM_OUT=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_PWM_INPUT=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_PWM_OUT_SIM=y
 CONFIG_DRIVERS_PX4IO=y
-CONFIG_DRIVERS_ROBOCLAW=y
+#CONFIG_DRIVERS_ROBOCLAW=y
 CONFIG_DRIVERS_RPM=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_COMMON_TELEMETRY=y
@@ -42,6 +41,7 @@ CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
@@ -50,6 +50,7 @@ CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
@@ -65,17 +66,15 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y
@@ -93,7 +92,6 @@ CONFIG_SYSTEMCMDS_PWM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
 CONFIG_SYSTEMCMDS_REFLECT=y
 CONFIG_SYSTEMCMDS_SD_BENCH=y
-CONFIG_SYSTEMCMDS_SD_STRESS=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
@@ -102,4 +100,4 @@ CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
-CONFIG_EXAMPLES_FAKE_GPS=y
+CONFIG_DRIVERS_TRANSPONDER_SAGETECH_MXS=y

boards/cubepilot/cubeorange/nuttx-config/test/defconfig

@@ -60,6 +60,7 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
+CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
@@ -196,6 +197,9 @@ CONFIG_STM32H7_USART_SWAP=y
 CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_TASK_NAME_SIZE=24
+CONFIG_TESTING_OSTEST=y
+CONFIG_TESTING_OSTEST_FPUTESTDISABLE=y
+CONFIG_TESTING_OSTEST_STACKSIZE=10240
 CONFIG_TTY_SIGINT=y
 CONFIG_TTY_SIGTSTP=y
 CONFIG_UART4_BAUD=57600

boards/cubepilot/cubeorange/test.px4board

@@ -4,7 +4,7 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
-CONFIG_EXAMPLES_FAKE_GPS=n
+CONFIG_DRIVERS_UAVCAN=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_ROVER_POS_CONTROL=n
@@ -12,3 +12,4 @@ CONFIG_MODULES_TEMPERATURE_COMPENSATION=n
 CONFIG_BOARD_TESTING=y
 CONFIG_DRIVERS_TEST_PPM=y
 CONFIG_SYSTEMCMDS_MICROBENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y

boards/diatone/mamba-f405-mk2/default.px4board

@@ -4,7 +4,7 @@ CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_EXTERNAL_METADATA=y
-CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
@@ -23,10 +23,10 @@ CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
-CONFIG_MODULES_EKF2=n
+CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_LAND_DETECTOR=y
-CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_LOAD_MON=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
 CONFIG_MODULES_MC_ATT_CONTROL=y

boards/diatone/mamba-f405-mk2/nuttx-config/nsh/defconfig

@@ -175,8 +175,8 @@ CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_TASK_NAME_SIZE=24
 CONFIG_UART4_BAUD=57600
-CONFIG_UART4_RXBUFSIZE=300
-CONFIG_UART4_TXBUFSIZE=900
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=600
 CONFIG_USART1_RXBUFSIZE=300
 CONFIG_USART1_RXDMA=y
 CONFIG_USART1_TXBUFSIZE=300

boards/freefly/can-rtk-gps/default.px4board

@@ -1,16 +1,22 @@
 CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m7"
 CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_NO_HELP=y
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_ST=y
 CONFIG_DRIVERS_LIGHTS_RGBLED_NCP5623C=y
 CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
-CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MTD=y
@@ -19,5 +25,7 @@ CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_REBOOT=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/holybro/can-gps-v1/default.px4board

@@ -2,6 +2,7 @@ CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_ROMFSROOT="cannode"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
@@ -12,6 +13,18 @@ CONFIG_DRIVERS_LIGHTS_RGBLED_NCP5623C=y
 CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
 CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/holybro/kakutef7/default.px4board

@@ -1,5 +1,6 @@
 CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_EXTERNAL_METADATA=y
 CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS3"
@@ -31,7 +32,7 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
 CONFIG_SYSTEMCMDS_MIXER=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PWM=y

boards/holybro/kakuteh7/default.px4board

@@ -15,10 +15,10 @@ CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
-CONFIG_DRIVERS_OSD=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_DRIVERS_OSD=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_PWM_OUT_SIM=y
@@ -28,8 +28,8 @@ CONFIG_DRIVERS_RPM=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_COMMON_TELEMETRY=y
 CONFIG_DRIVERS_TONE_ALARM=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
@@ -42,6 +42,7 @@ CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
@@ -60,12 +61,12 @@ CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
 CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
 CONFIG_MODULES_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y

boards/holybro/kakuteh7/nuttx-config/bootloader/defconfig

@@ -30,7 +30,7 @@ CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x004b
+CONFIG_CDCACM_PRODUCTID=0x0050
 CONFIG_CDCACM_PRODUCTSTR="PX4 BL Holybro KakuteH7"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000