Increase maximum rates

Update

F

Update submodule

Update submodules

.ci/Jenkinsfile-compile

@@ -47,7 +47,7 @@ pipeline {
                      "ark_fmu-v6x_bootloader",
                      "ark_fmu-v6x_default",
                      "ark_pi6x_bootloader",
-                     "ark_pi6x_default"
+                     "ark_pi6x_default",
                      "atl_mantis-edu_default",
                      "av_x-v1_default",
                      "bitcraze_crazyflie21_default",

.vscode/cmake-variants.yaml

@@ -151,16 +151,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-rtk-gps_canbootloader
-    ark_septentrio_gps_default:
-      short: ark_septentrio_gps_default
+    ark_septentrio-gps_default:
+      short: ark_septentrio-gps_default
       buildType: MinSizeRel
       settings:
-        CONFIG: ark_septentrio_gps_default
-    ark_septentrio_gps_canbootloader:
-      short: ark_septentrio_gps_canbootloader
+        CONFIG: ark_septentrio-gps_default
+    ark_septentrio-gps_canbootloader:
+      short: ark_septentrio-gps_canbootloader
       buildType: MinSizeRel
       settings:
-        CONFIG: ark_septentrio_gps_canbootloader
+        CONFIG: ark_septentrio-gps_canbootloader
     ark_cannode_default:
       short: ark_cannode_default
       buildType: MinSizeRel

CMakeLists.txt

@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2024 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -132,7 +132,9 @@ list(GET VERSION_LIST 2 PX4_VERSION_PATCH)
 string(REPLACE "-" ";" PX4_VERSION_PATCH ${PX4_VERSION_PATCH})
 list(GET PX4_VERSION_PATCH 0 PX4_VERSION_PATCH)
 
-message(STATUS "PX4 version: ${PX4_GIT_TAG} (${PX4_VERSION_MAJOR}.${PX4_VERSION_MINOR}.${PX4_VERSION_PATCH})")
+# # Capture only the hash part after 'g'
+string(REGEX MATCH "g([a-f0-9]+)$" GIT_HASH "${PX4_GIT_TAG}")
+set(PX4_GIT_HASH ${CMAKE_MATCH_1})
 
 define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                  BRIEF_DOCS "PX4 module libs"

Makefile

@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2015 - 2020 PX4 Development Team. All rights reserved.
+# Copyright (c) 2015 - 2024 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -323,7 +323,32 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
-bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: \
+	ark_fmu-v6x_bootloader \
+	ark_pi6x_bootloader \
+	cuav_nora_bootloader \
+	cuav_x7pro_bootloader \
+	cubepilot_cubeorange_bootloader \
+	cubepilot_cubeorangeplus_bootloader \
+	hkust_nxt-dual_bootloader \
+	hkust_nxt-v1_bootloader \
+	holybro_durandal-v1_bootloader \
+	holybro_kakuteh7_bootloader \
+	holybro_kakuteh7mini_bootloader \
+	holybro_kakuteh7v2_bootloader \
+	matek_h743_bootloader \
+	matek_h743-mini_bootloader \
+	matek_h743-slim_bootloader \
+	modalai_fc-v2_bootloader \
+	mro_ctrl-zero-classic_bootloader \
+	mro_ctrl-zero-h7_bootloader \
+	mro_ctrl-zero-h7-oem_bootloader \
+	mro_pixracerpro_bootloader \
+	px4_fmu-v6c_bootloader \
+	px4_fmu-v6u_bootloader \
+	px4_fmu-v6x_bootloader \
+	px4_fmu-v6xrt_bootloader \
+	siyi_n7_bootloader
 	git status
 
 .PHONY: coverity_scan

ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal

@@ -24,7 +24,6 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -24,7 +24,6 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo

@@ -24,7 +24,6 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1
 
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -25,7 +25,6 @@ param set-default FW_W_EN 1
 
 param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
-param set-default MIS_DIST_1WP 2500
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/1090_gazebo-classic_monocopter

@@ -0,0 +1,70 @@
+#!/bin/sh
+#
+# @name Monocopter SITL
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_LND_ANG 8
+
+param set-default NPFG_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256

ROMFS/px4fmu_common/init.d-posix/airframes/4001_gz_x500

@@ -52,3 +52,4 @@ param set-default SIM_GZ_EC_MAX3 1000
 param set-default SIM_GZ_EC_MAX4 1000
 
 param set-default MPC_THR_HOVER 0.60
+param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/4004_gz_standard_vtol

@@ -101,8 +101,9 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1
 
 param set-default NAV_ACC_RAD 5
+param set-default NAV_DLL_ACT 2
 
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.75
+param set-default VT_F_TRANS_THR 0.3
 param set-default VT_TYPE 2
 param set-default FD_ESCS_EN 0

ROMFS/px4fmu_common/init.d-posix/airframes/4006_gz_px4vision

@@ -132,3 +132,5 @@ param set-default SIM_GZ_EC_MAX1 1100
 param set-default SIM_GZ_EC_MAX2 1100
 param set-default SIM_GZ_EC_MAX3 1100
 param set-default SIM_GZ_EC_MAX4 1100
+
+param set-default NAV_DLL_ACT 2

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -67,6 +67,7 @@ px4_add_romfs_files(
 	1061_gazebo-classic_r1_rover
 	1062_flightgear_tf-r1
 	1070_gazebo-classic_boat
+	1090_gazebo-classic_monocopter
 
 	2507_gazebo-classic_cloudship
 

ROMFS/px4fmu_common/init.d/CMakeLists.txt

@@ -84,6 +84,13 @@ if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
 	)
 endif()
 
+if(CONFIG_MODULES_ROVER_ACKERMANN)
+	px4_add_romfs_files(
+		rc.rover_ackermann_apps
+		rc.rover_ackermann_defaults
+	)
+endif()
+
 if(CONFIG_MODULES_UUV_ATT_CONTROL)
 	px4_add_romfs_files(
 		rc.uuv_apps

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -66,7 +66,6 @@ param set-default MC_PITCHRATE_I 0.05
 param set-default MC_YAWRATE_MAX 20
 param set-default MC_AIRMODE 1
 
-param set-default MIS_DIST_1WP 100
 param set-default MIS_TAKEOFF_ALT 15
 
 param set-default MPC_XY_P 0.8

ROMFS/px4fmu_common/init.d/airframes/50010_ackermann_rover_generic

@@ -0,0 +1,12 @@
+#!/bin/sh
+#
+# @name Generic ackermann rover
+#
+# @type Rover
+# @class Rover
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.rover_ackermann_defaults

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -149,6 +149,12 @@ if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
 	)
 endif()
 
+if(CONFIG_MODULES_ROVER_ACKERMANN)
+	px4_add_romfs_files(
+		50010_ackermann_rover_generic
+	)
+endif()
+
 if(CONFIG_MODULES_UUV_ATT_CONTROL)
 	px4_add_romfs_files(
 		# [60000, 61000] (Unmanned) Underwater Robots

ROMFS/px4fmu_common/init.d/rc.rover_ackermann_apps

@@ -0,0 +1,11 @@
+#!/bin/sh
+# Standard apps for a ackermann drive rover.
+
+# Start the attitude and position estimator.
+ekf2 start &
+
+# Start rover ackermann drive controller.
+rover_ackermann start
+
+# Start Land Detector.
+land_detector start rover

ROMFS/px4fmu_common/init.d/rc.rover_ackermann_defaults

@@ -0,0 +1,13 @@
+#!/bin/sh
+# Ackermann rover parameters.
+
+set VEHICLE_TYPE rover_ackermann
+param set-default MAV_TYPE 10 # MAV_TYPE_GROUND_ROVER
+param set-default CA_AIRFRAME 5 # Rover (Ackermann)
+param set-default CA_R_REV 1 # Motor is assumed to be reversible
+param set-default EKF2_MAG_TYPE 1 # make sure magnetometer is fused even when not flying
+param set-default EKF2_GBIAS_INIT 0.01
+param set-default EKF2_ANGERR_INIT 0.01
+param set-default NAV_ACC_RAD 0.5 # Waypoint acceptance radius
+param set-default NAV_RCL_ACT 6 # Disarm on manual control loss
+param set-default COM_FAIL_ACT_T 1 # Delay before failsafe after rc loss

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -138,6 +138,12 @@ then
 	adis16507 -S start
 fi
 
+# SCH16T spi external IMU
+if param compare -s SENS_EN_SCH16T 1
+then
+	sch16t -S start
+fi
+
 # Eagle Tree airspeed sensor external I2C
 if param compare -s SENS_EN_ETSASPD 1
 then

ROMFS/px4fmu_common/init.d/rc.vehicle_setup

@@ -41,6 +41,15 @@ then
 	. ${R}etc/init.d/rc.rover_differential_apps
 fi
 
+#
+# Ackermann Rover setup.
+#
+if [ $VEHICLE_TYPE = rover_ackermann ]
+then
+	# Start ackermann drive rover apps.
+	. ${R}etc/init.d/rc.rover_ackermann_apps
+fi
+
 #
 # VTOL setup.
 #

ROMFS/px4fmu_common/init.d/rcS

@@ -123,6 +123,13 @@ else
 		set PARAM_FILE /fs/mtd_params
 	fi
 
+	# Check if /fs/mtd_params is a valid BSON file
+	if ! bsondump docsize /fs/mtd_caldata
+	then
+		echo "New /fs/mtd_caldata size is:"
+		bsondump docsize /fs/mtd_caldata
+	fi
+
 	#
 	# Load parameters.
 	#
@@ -439,6 +446,14 @@ else
 	# Must be started after the serial config is read
 	rc_input start $RC_INPUT_ARGS
 
+	# Manages USB interface
+	if ! cdcacm_autostart start
+	then
+		sercon
+		echo "Starting MAVLink on /dev/ttyACM0"
+		mavlink start -d /dev/ttyACM0
+	fi
+
 	#
 	# Play the startup tune (if not disabled or there is an error)
 	#

Tools/module_config/output_groups_from_timer_config.py

@@ -54,12 +54,21 @@ def extract_timer_from_channel(line, timer_names):
 
     return None
 
+def imxrt_is_dshot(line):
+
+    # NXP FlexPWM format format: initIOPWM(PWM::FlexPWM2),
+    search = re.search('(initIOPWMDshot)', line, re.IGNORECASE)
+    if search:
+        return True
+
+    return False
+
 def get_timer_groups(timer_config_file, verbose=False):
     with open(timer_config_file, 'r') as f:
         timer_config = f.read()
 
     # timers
-    dshot_support = {} # key: timer
+    dshot_support = {str(i): False for i in range(16)}
     timers_start_marker = 'io_timers_t io_timers'
     timers_start = timer_config.find(timers_start_marker)
     if timers_start == -1:
@@ -78,10 +87,9 @@ def get_timer_groups(timer_config_file, verbose=False):
         if timer_type == 'imxrt':
             if verbose: print('imxrt timer found')
             timer_names.append(timer)
+            if imxrt_is_dshot(line):
+                dshot_support[str(len(timers))] = True
             timers.append(str(len(timers)))
-            dshot_support = {str(i): False for i in range(16)}
-            for i in range(8): # First 8 channels support dshot
-                dshot_support[str(i)] = True
         elif timer:
             if verbose: print('found timer def: {:}'.format(timer))
             dshot_support[timer] = 'DMA' in line

Tools/px4moduledoc/srcparser.py

@@ -15,7 +15,7 @@ class ModuleDocumentation(object):
     # TOC in https://github.com/PX4/PX4-user_guide/blob/main/en/SUMMARY.md
     valid_categories = ['driver', 'estimator', 'controller', 'system',
                         'communication', 'command', 'template', 'simulation', 'autotune']
-    valid_subcategories = ['', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
+    valid_subcategories = ['', 'camera', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
                            'magnetometer', 'baro', 'optical_flow', 'rpm_sensor', 'transponder']
 
     max_line_length = 80 # wrap lines that are longer than this

Tools/px_uploader.py

@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
 ############################################################################
 #
-#   Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2012-2024 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -50,9 +50,6 @@
 #       Currently only used for informational purposes.
 #
 
-# for python2.7 compatibility
-from __future__ import print_function
-
 import sys
 import argparse
 import binascii
@@ -70,35 +67,32 @@ from sys import platform as _platform
 try:
     import serial
 except ImportError as e:
-    print("Failed to import serial: " + str(e))
+    print(f"Failed to import serial: {e}")
     print("")
     print("You may need to install it using:")
-    print("    pip3 install --user pyserial")
+    print("    python -m pip install pyserial")
     print("")
     sys.exit(1)
 
 
-# Define time to use time.time() by default
-def _time():
-    return time.time()
-
 # Detect python version
 if sys.version_info[0] < 3:
-    runningPython3 = False
-else:
-    runningPython3 = True
-    if sys.version_info[1] >=3:
-        # redefine to use monotonic time when available
-        def _time():
-            try:
-                return time.monotonic()
-            except Exception:
-                return time.time()
+    raise RuntimeError("Python 2 is not supported. Please try again using Python 3.")
+    sys.exit(1)
+
+
+# Use monotonic time where available
+def _time():
+    try:
+        return time.monotonic()
+    except Exception:
+        return time.time()
 
 class FirmwareNotSuitableException(Exception):
     def __init__(self, message):
         super(FirmwareNotSuitableException, self).__init__(message)
 
+
 class firmware(object):
     '''Loads a firmware file'''
 
@@ -163,13 +157,13 @@ class firmware(object):
 
     def crc(self, padlen):
         state = self.__crc32(self.image, int(0))
-        for i in range(len(self.image), (padlen - 1), 4):
+        for _ in range(len(self.image), (padlen - 1), 4):
             state = self.__crc32(self.crcpad, state)
         return state
 
 
-class uploader(object):
-    '''Uploads a firmware file to the PX FMU bootloader'''
+class uploader:
+    '''Uploads a firmware file to the PX4 bootloader'''
 
     # protocol bytes
     INSYNC          = b'\x12'
@@ -195,6 +189,8 @@ class uploader(object):
     GET_CHIP        = b'\x2c'     # rev5+  , get chip version
     SET_BOOT_DELAY  = b'\x2d'     # rev5+  , set boot delay
     GET_CHIP_DES    = b'\x2e'     # rev5+  , get chip description in ASCII
+    GET_VERSION     = b'\x2f'     # rev5+  , get chip description in ASCII
+    CHIP_FULL_ERASE = b'\x40'     # full erase of flash, rev6+
     MAX_DES_LENGTH  = 20
 
     REBOOT          = b'\x30'
@@ -205,6 +201,7 @@ class uploader(object):
     INFO_BOARD_ID   = b'\x02'        # board type
     INFO_BOARD_REV  = b'\x03'        # board revision
     INFO_FLASH_SIZE = b'\x04'        # max firmware size in bytes
+    BL_VERSION      = b'\x07'        # get bootloader version, e.g. major.minor.patch.githash (up to 20 chars)
 
     PROG_MULTI_MAX  = 252            # protocol max is 255, must be multiple of 4
     READ_MULTI_MAX  = 252            # protocol max is 255
@@ -235,6 +232,7 @@ class uploader(object):
         self.baudrate_bootloader = baudrate_bootloader
         self.baudrate_flightstack = baudrate_flightstack
         self.baudrate_flightstack_idx = -1
+        self.force_erase = False
 
     def close(self):
         if self.port is not None:
@@ -357,19 +355,22 @@ class uploader(object):
             self.port.baudrate = self.baudrate_bootloader * 2.33
         except NotImplementedError as e:
             # This error can occur because pySerial on Windows does not support odd baudrates
-            print(str(e) + " -> could not check for FTDI device, assuming USB connection")
+            print(f"{e} -> could not check for FTDI device, assuming USB connection")
             return
 
         self.__send(uploader.GET_SYNC +
                     uploader.EOC)
         try:
             self.__getSync(False)
-        except:
+        except RuntimeError:
             # if it fails we are on a real serial port - only leave this enabled on Windows
             if sys.platform.startswith('win'):
                 self.ackWindowedMode = True
         finally:
-            self.port.baudrate = self.baudrate_bootloader
+            try:
+                self.port.baudrate = self.baudrate_bootloader
+            except Exception:
+                pass
 
     # send the GET_DEVICE command and wait for an info parameter
     def __getInfo(self, param):
@@ -410,6 +411,17 @@ class uploader(object):
         pieces = value.split(b",")
         return pieces
 
+    def __getVersion(self):
+        self.__send(uploader.GET_VERSION + uploader.EOC)
+        try:
+            length = self.__recv_int()
+            value = self.__recv(length)
+            self.__getSync()
+        except RuntimeError:
+            # Bootloader doesn't support version call
+            return "unknown"
+        return value.decode()
+
     def __drawProgressBar(self, label, progress, maxVal):
         if maxVal < progress:
             progress = maxVal
@@ -421,10 +433,16 @@ class uploader(object):
 
     # send the CHIP_ERASE command and wait for the bootloader to become ready
     def __erase(self, label):
-        print("Windowed mode: %s" % self.ackWindowedMode)
+        print(f"Windowed mode: {self.ackWindowedMode}")
         print("\n", end='')
-        self.__send(uploader.CHIP_ERASE +
-                    uploader.EOC)
+
+        if self.force_erase:
+            print("Trying force erase of full chip...\n")
+            self.__send(uploader.CHIP_FULL_ERASE +
+                        uploader.EOC)
+        else:
+            self.__send(uploader.CHIP_ERASE +
+                        uploader.EOC)
 
         # erase is very slow, give it 30s
         deadline = _time() + 30.0
@@ -441,9 +459,14 @@ class uploader(object):
 
             if self.__trySync():
                 self.__drawProgressBar(label, 10.0, 10.0)
+                if self.force_erase:
+                    print("\nForce erase done.\n")
                 return
 
-        raise RuntimeError("timed out waiting for erase")
+        if self.force_erase:
+            raise RuntimeError("timed out waiting for erase, force erase is likely not supported by bootloader!")
+        else:
+            raise RuntimeError("timed out waiting for erase")
 
     # send a PROG_MULTI command to write a collection of bytes
     def __program_multi(self, data, windowMode):
@@ -581,8 +604,11 @@ class uploader(object):
         self.board_rev = self.__getInfo(uploader.INFO_BOARD_REV)
         self.fw_maxsize = self.__getInfo(uploader.INFO_FLASH_SIZE)
 
+        self.version = self.__getVersion()
+
     # upload the firmware
-    def upload(self, fw_list, force=False, boot_delay=None, boot_check=False):
+    def upload(self, fw_list, force=False, boot_delay=None, boot_check=False, force_erase=False):
+        self.force_erase = force_erase
         # select correct binary
         found_suitable_firmware = False
         for file in fw_list:
@@ -611,6 +637,8 @@ class uploader(object):
         print("Loaded firmware for board id: %s,%s size: %d bytes (%.2f%%) " % (fw.property('board_id'), fw.property('board_revision'), fw.property('image_size'), percent))
         print()
 
+        print(f"Bootloader version: {self.version}")
+
         # Make sure we are doing the right thing
         start = _time()
         if self.board_type != fw.property('board_id'):
@@ -640,14 +668,14 @@ class uploader(object):
             self.otp_coa = self.otp[32:160]
             # show user:
             try:
-                print("sn: ", end='')
+                print("Sn: ", end='')
                 for byte in range(0, 12, 4):
                     x = self.__getSN(byte)
                     x = x[::-1]  # reverse the bytes
                     self.sn = self.sn + x
                     print(binascii.hexlify(x).decode('Latin-1'), end='')  # show user
                 print('')
-                print("chip: %08x" % self.__getCHIP())
+                print("Chip: %08x" % self.__getCHIP())
 
                 otp_id = self.otp_id.decode('Latin-1')
                 if ("PX4" in otp_id):
@@ -657,17 +685,19 @@ class uploader(object):
                     print("OTP pid: " + binascii.hexlify(self.otp_pid).decode('Latin-1'))
                     print("OTP coa: " + binascii.b2a_base64(self.otp_coa).decode('Latin-1'))
 
-            except Exception:
+            except Exception as e:
                 # ignore bad character encodings
+                print(f"Exception ignored: {e}")
                 pass
 
         # Silicon errata check was added in v5
         if (self.bl_rev >= 5):
             des = self.__getCHIPDes()
             if (len(des) == 2):
-                print("family: %s" % des[0])
-                print("revision: %s" % des[1])
-                print("flash: %d bytes" % self.fw_maxsize)
+                family, revision = des
+                print(f"Family: {family.decode()}")
+                print(f"Revision: {revision.decode()}")
+                print(f"Flash: {self.fw_maxsize} bytes")
 
                 # Prevent uploads where the maximum image size of the board config is smaller than the flash
                 # of the board. This is a hint the user chose the wrong config and will lack features
@@ -678,8 +708,7 @@ class uploader(object):
                 # https://github.com/PX4/Firmware/blob/master/src/drivers/boards/common/stm32/board_mcu_version.c#L125-L144
 
                 if self.fw_maxsize > fw.property('image_maxsize') and not force:
-                    raise RuntimeError("Board can accept larger flash images (%u bytes) than board config (%u bytes). Please use the correct board configuration to avoid lacking critical functionality."
-                                       % (self.fw_maxsize, fw.property('image_maxsize')))
+                    raise RuntimeError(f"Board can accept larger flash images ({self.fw_maxsize} bytes) than board config ({fw.property('image_maxsize')} bytes). Please use the correct board configuration to avoid lacking critical functionality.")
         else:
             # If we're still on bootloader v4 on a Pixhawk, we don't know if we
             # have the silicon errata and therefore need to flash px4_fmu-v2
@@ -780,16 +809,13 @@ class uploader(object):
 
 
 def main():
-    # Python2 is EOL
-    if not runningPython3:
-        raise RuntimeError("Python 2 is not supported. Please try again using Python 3.")
-
     # Parse commandline arguments
     parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.")
     parser.add_argument('--port', action="store", required=True, help="Comma-separated list of serial port(s) to which the FMU may be attached")
     parser.add_argument('--baud-bootloader', action="store", type=int, default=115200, help="Baud rate of the serial port (default is 115200) when communicating with bootloader, only required for true serial ports.")
     parser.add_argument('--baud-flightstack', action="store", default="57600", help="Comma-separated list of baud rate of the serial port (default is 57600) when communicating with flight stack (Mavlink or NSH), only required for true serial ports.")
     parser.add_argument('--force', action='store_true', default=False, help='Override board type check, or silicon errata checks and continue loading')
+    parser.add_argument('--force-erase', action="store_true", help="Do not perform the blank check, always erase every sector of the application space")
     parser.add_argument('--boot-delay', type=int, default=None, help='minimum boot delay to store in flash')
     parser.add_argument('--use-protocol-splitter-format', action='store_true', help='use protocol splitter format for reboot')
     parser.add_argument('firmware', action="store", nargs='+', help="Firmware file(s)")
@@ -867,9 +893,10 @@ def main():
                         # Windows, don't open POSIX ports
                         if "/" not in port:
                             up = uploader(port, args.baud_bootloader, baud_flightstack)
-                except Exception:
+                except Exception as e:
                     # open failed, rate-limit our attempts
                     time.sleep(0.05)
+                    print(f"Exception ignored: {e}")
 
                     # and loop to the next port
                     continue
@@ -884,10 +911,10 @@ def main():
                         up.identify()
                         found_bootloader = True
                         print()
-                        print("Found board id: %s,%s bootloader version: %s on %s" % (up.board_type, up.board_rev, up.bl_rev, port))
+                        print(f"Found board id: {up.board_type},{up.board_rev} bootloader protocol revision {up.bl_rev} on {port}")
                         break
 
-                    except Exception:
+                    except (RuntimeError, serial.SerialException):
 
                         if not up.send_reboot(args.use_protocol_splitter_format):
                             break
@@ -907,14 +934,14 @@ def main():
 
                 try:
                     # ok, we have a bootloader, try flashing it
-                    up.upload(args.firmware, force=args.force, boot_delay=args.boot_delay)
+                    up.upload(args.firmware, force=args.force, boot_delay=args.boot_delay, force_erase=args.force_erase)
 
                     # if we made this far without raising exceptions, the upload was successful
                     successful = True
 
-                except RuntimeError as ex:
+                except RuntimeError as e:
                     # print the error
-                    print("\nERROR: %s" % ex.args)
+                    print(f"\n\nError: {e}")
 
                 except FirmwareNotSuitableException:
                     unsuitable_board = True

Tools/setup/arch.sh

@@ -95,7 +95,7 @@ if [[ $INSTALL_SIM == "true" ]]; then
 
 	# java (jmavsim)
 	sudo pacman -S --noconfirm --needed \
-		ant
+		ant \
 		;
 
 	# Gazebo setup

Tools/setup/requirements.txt

@@ -1,5 +1,4 @@
 argcomplete
-argparse>=1.2
 cerberus
 coverage
 empy==3.3.4

Tools/setup/ubuntu.sh

@@ -66,6 +66,8 @@ elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
 elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
 	echo "Ubuntu 22.04"
+elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+	echo "Linux Mint 21.3"
 fi
 
 
@@ -146,7 +148,7 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		util-linux \
 		vim-common \
 		;
-	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" ]]; then
+	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" || "${UBUNTU_RELEASE}" == "21.3" ]]; then
 		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		kconfig-frontends \
 		;
@@ -205,6 +207,8 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		java_version=13
 	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
 		java_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		java_version=11
 	else
 		java_version=14
 	fi
@@ -228,6 +232,17 @@ if [[ $INSTALL_SIM == "true" ]]; then
 		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable $(lsb_release -cs) main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
 		sudo apt-get update -y --quiet
 
+		# Install Gazebo
+		gazebo_packages="gz-garden"
+	elif [[ "${UBUNTU_RELEASE}" == "21.3" ]]; then
+		echo "Gazebo (Garden) will be installed"
+		echo "Earlier versions will be removed"
+		# Add Gazebo binary repository
+		sudo wget https://packages.osrfoundation.org/gazebo.gpg -O /usr/share/keyrings/pkgs-osrf-archive-keyring.gpg
+		echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/pkgs-osrf-archive-keyring.gpg] http://packages.osrfoundation.org/gazebo/ubuntu-stable jammy main" | sudo tee /etc/apt/sources.list.d/gazebo-stable.list > /dev/null
+
+		sudo apt-get update -y --quiet
+
 		# Install Gazebo
 		gazebo_packages="gz-garden"
 	else

boards/airmind/mindpx-v2/default.px4board

@@ -12,6 +12,7 @@ CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y

boards/ark/fmu-v6x/default.px4board

@@ -8,6 +8,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
@@ -18,6 +19,7 @@ CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
+CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
@@ -57,6 +59,7 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
+CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y

boards/ark/fmu-v6x/nuttx-config/nsh/defconfig

@@ -147,8 +147,8 @@ CONFIG_NETDB_DNSSERVER_NOADDR=y
 CONFIG_NETDEV_PHY_IOCTL=y
 CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
-CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
-CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_DNSIPADDR=0xA290AFE
+CONFIG_NETINIT_DRIPADDR=0xA290AFE
 CONFIG_NETINIT_MONITOR=y
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49

boards/ark/pi6x/default.px4board

@@ -8,6 +8,7 @@ CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
@@ -39,6 +40,7 @@ CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
+CONFIG_MAVLINK_DIALECT="development"
 CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y

boards/ark/pi6x/init/rc.board_defaults

@@ -32,19 +32,10 @@ then
 	param set-default SENS_TEMP_ID 2490378
 fi
 
-param set-default EKF2_BARO_DELAY 39
-param set-default EKF2_BARO_NOISE 0.9
-param set-default EKF2_HGT_REF 0
-param set-default EKF2_MAG_DELAY 60
-param set-default EKF2_MAG_NOISE 0.06
 param set-default EKF2_MULTI_IMU 2
 param set-default EKF2_OF_CTRL 1
-param set-default EKF2_OF_DELAY 28
 param set-default EKF2_OF_N_MIN 0.05
 param set-default EKF2_RNG_A_HMAX 25
-param set-default EKF2_RNG_DELAY 105
-param set-default EKF2_RNG_NOISE 0.03
 param set-default EKF2_RNG_QLTY_T 0.1
-param set-default EKF2_RNG_SFE 0.03
 
 param set-default SENS_FLOW_RATE 150

boards/ark/septentrio-gps/src/board_config.h

@@ -47,7 +47,7 @@
 #define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)
 
 /* Safety LED */
-#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
 
 /* Tone alarm output. */
 #define TONE_ALARM_TIMER             2    /* timer 2 */

boards/atl/mantis-edu/default.px4board

@@ -2,6 +2,7 @@ CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m7"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_MAIERTEK_MPC2520=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y

boards/av/x-v1/nuttx-config/nsh/defconfig

@@ -139,8 +139,8 @@ CONFIG_NETDB_DNSSERVER_NOADDR=y
 CONFIG_NETDEV_PHY_IOCTL=y
 CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
-CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
-CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_DNSIPADDR=0xA290AFE
+CONFIG_NETINIT_DRIPADDR=0xA290AFE
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49
 CONFIG_NETUTILS_TELNETD=y

boards/bitcraze/crazyflie/default.px4board

@@ -3,6 +3,7 @@ CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_LPS25H=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_GPS=y

boards/bitcraze/crazyflie21/default.px4board

@@ -4,6 +4,7 @@ CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
 CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L1X=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088_I2C=y

boards/cuav/nora/default.px4board

@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_COMMON_BAROMETERS=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y

boards/cuav/x7pro/default.px4board

@@ -6,6 +6,7 @@ CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y

boards/cubepilot/cubeorange/default.px4board

@@ -11,6 +11,7 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/cubepilot/cubeorangeplus/default.px4board

@@ -11,6 +11,7 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/cubepilot/cubeyellow/default.px4board

@@ -12,6 +12,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/diatone/mamba-f405-mk2/default.px4board

@@ -8,6 +8,7 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y

boards/flywoo/gn-f405/default.px4board

@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y

boards/hkust/nxt-dual/default.px4board

@@ -12,6 +12,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/hkust/nxt-dual/src/hw_config.h

@@ -97,9 +97,9 @@
 #define INTERFACE_USART_CONFIG         "/dev/ttyS5,57600"
 #define BOOT_DELAY_ADDRESS             0x000001a0
 #define BOARD_TYPE                     1013
-#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
-#define BOARD_FLASH_SECTORS            (15)
-#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
+#define BOARD_FLASH_SECTORS            (14)
+#define BOARD_FLASH_SIZE               (16 * 128 * 1024)
+#define APP_RESERVATION_SIZE 	       (1 * 128 * 1024)
 
 #define OSC_FREQ                       16
 

boards/hkust/nxt-v1/default.px4board

@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/holybro/durandal-v1/default.px4board

@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/holybro/kakutef7/default.px4board

@@ -9,6 +9,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y

boards/holybro/kakutef7/init/rc.board_defaults

@@ -15,7 +15,7 @@ param set-default SYS_AUTOSTART 4050
 param set-default SYS_HAS_MAG 0
 
 # enable gravity fusion
-param set-default EKF2_IMU_CONTROL 7
+param set-default EKF2_IMU_CTRL 7
 
 # the startup tune is not great on a binary output buzzer, so disable it
 param set-default CBRK_BUZZER 782090

boards/holybro/kakuteh7/default.px4board

@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/holybro/kakuteh7/init/rc.board_defaults

@@ -25,7 +25,7 @@ param set-default SYS_AUTOSTART 4050
 # use EKF2 without mag
 param set-default SYS_HAS_MAG 0
 # and enable gravity fusion
-param set-default EKF2_IMU_CONTROL 7
+param set-default EKF2_IMU_CTRL 7
 
 # the startup tune is not great on a binary output buzzer, so disable it
 param set-default CBRK_BUZZER 782090

boards/holybro/kakuteh7mini/default.px4board

@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/holybro/kakuteh7mini/init/rc.board_defaults

@@ -25,7 +25,7 @@ param set-default SYS_AUTOSTART 4050
 # use EKF2 without mag
 param set-default SYS_HAS_MAG 0
 # and enable gravity fusion
-param set-default EKF2_IMU_CONTROL 7
+param set-default EKF2_IMU_CTRL 7
 
 # the startup tune is not great on a binary output buzzer, so disable it
 param set-default CBRK_BUZZER 782090

boards/holybro/kakuteh7v2/default.px4board

@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/holybro/kakuteh7v2/init/rc.board_defaults

@@ -25,7 +25,7 @@ param set-default SYS_AUTOSTART 4050
 # use EKF2 without mag
 param set-default SYS_HAS_MAG 0
 # and enable gravity fusion
-param set-default EKF2_IMU_CONTROL 7
+param set-default EKF2_IMU_CTRL 7
 
 # the startup tune is not great on a binary output buzzer, so disable it
 param set-default CBRK_BUZZER 782090

boards/holybro/pix32v5/default.px4board

@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/matek/h743-mini/default.px4board

@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y

boards/matek/h743-slim/default.px4board

@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y

boards/matek/h743/default.px4board

@@ -8,6 +8,7 @@ CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y

boards/modalai/fc-v1/default.px4board

@@ -12,6 +12,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/modalai/fc-v2/default.px4board

@@ -12,6 +12,7 @@ CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y

boards/mro/ctrl-zero-classic/default.px4board

@@ -12,6 +12,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/mro/ctrl-zero-f7-oem/default.px4board

@@ -10,6 +10,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/mro/ctrl-zero-f7/default.px4board

@@ -9,6 +9,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/mro/ctrl-zero-h7-oem/default.px4board

@@ -10,6 +10,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/mro/ctrl-zero-h7/default.px4board

@@ -10,6 +10,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/mro/pixracerpro/default.px4board

@@ -9,6 +9,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/mro/x21-777/default.px4board

@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/mro/x21/default.px4board

@@ -10,6 +10,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/nxp/fmuk66-e/default.px4board

@@ -11,6 +11,7 @@ CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y

boards/nxp/fmuk66-v3/default.px4board

@@ -11,6 +11,7 @@ CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y

boards/nxp/mr-canhubk3/nuttx-config/nsh/defconfig

@@ -158,8 +158,8 @@ CONFIG_NETDEV_LATEINIT=y
 CONFIG_NETDEV_PHY_IOCTL=y
 CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
-CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
-CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_DNSIPADDR=0xA290AFE
+CONFIG_NETINIT_DRIPADDR=0xA290AFE
 CONFIG_NETINIT_MONITOR=y
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49

boards/nxp/mr-canhubk3/nuttx-config/sysview/defconfig

@@ -158,8 +158,8 @@ CONFIG_NETDEV_LATEINIT=y
 CONFIG_NETDEV_PHY_IOCTL=y
 CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
-CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
-CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_DNSIPADDR=0xA290AFE
+CONFIG_NETINIT_DRIPADDR=0xA290AFE
 CONFIG_NETINIT_MONITOR=y
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49

boards/omnibus/f4sd/default.px4board

@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y

boards/px4/fmu-v2/default.px4board

@@ -9,6 +9,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_MS5611=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_ST_L3GD20=y

boards/px4/fmu-v3/default.px4board

@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y

boards/px4/fmu-v4/default.px4board

@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y