feat (MAVLink): use RADIO_STATUS to fill input_rc data

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@gmail.com>

.github/labeler.yml

@@ -0,0 +1,10 @@
+# Labeler configuration file for GitHub Actions
+# The action is ./.github/workflows/label.yml
+# Docs for the syntax in this file can be found at
+# https://github.com/actions/labeler
+
+
+# Add 'Documentation' label to any changes within 'docs' folder or any subfolders
+"Documentation+📑":
+- changed-files:
+  - any-glob-to-any-file: docs/**

.github/workflows/checks.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/clang-tidy.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 jobs:
   build:
     runs-on: ubuntu-latest

.github/workflows/compile_macos.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/compile_ubuntu.yml

@@ -9,13 +9,11 @@ on:
       - 'release/**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
       - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 env:
   RUNS_IN_DOCKER: true

.github/workflows/ekf_functional_change_indicator.yml

@@ -6,7 +6,6 @@ on:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   unit_tests:

.github/workflows/ekf_update_change_indicator.yml

@@ -4,7 +4,6 @@ on:
   push:
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   unit_tests:

.github/workflows/failsafe_sim.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:
@@ -27,7 +25,7 @@ jobs:
           "failsafe_web",
         ]
     container:
-      image: px4io/px4-dev:v1.16.0-ondemand
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
       options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
     steps:
       - name: Install Node v20.18.0

.github/workflows/flash_analysis.yml

@@ -11,13 +11,11 @@ on:
       - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
       - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 env:
   MIN_FLASH_POS_DIFF_FOR_COMMENT: 50
@@ -28,7 +26,7 @@ jobs:
     name: Analyzing ${{ matrix.target }}
     runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
     container:
-      image: px4io/px4-dev:v1.16.0-ondemand
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
     strategy:
       matrix:
         target: [px4_fmu-v5x, px4_fmu-v6x]

.github/workflows/itcm_check.yml

@@ -9,20 +9,18 @@ on:
       - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
       - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   check_itcm:
     name: Checking ${{ matrix.target }}
     runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu24-full-x64,"run-id=${{ github.run_id }}",spot=false]
     container:
-      image: px4io/px4-dev:v1.16.0-ondemand
+      image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
     strategy:
       fail-fast: false
       matrix:

.github/workflows/label.yml

@@ -0,0 +1,21 @@
+# This workflow will triage pull requests and apply a label based on the
+# paths that are modified in the pull request.
+# The paths are set up in .github/labeler.yml
+#
+# See: https://github.com/actions/labeler
+
+name: Labeler
+on: [pull_request_target]
+
+jobs:
+  label:
+
+    runs-on: ubuntu-latest
+    permissions:
+      contents: read
+      pull-requests: write
+
+    steps:
+    - uses: actions/labeler@v5
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/mavros_mission_tests.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/mavros_offboard_tests.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/nuttx_env_config.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:
@@ -31,7 +29,7 @@ jobs:
     - name: Build PX4 and Run Test [${{ matrix.config }}]
       uses: addnab/docker-run-action@v3
       with:
-        image: px4io/px4-dev:v1.16.0-ondemand
+        image: px4io/px4-dev:v1.16.0-rc1-258-g0369abd556
         options: -v ${{ github.workspace }}:/workspace
         run: |
           cd /workspace

.github/workflows/python_checks.yml

@@ -6,13 +6,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.github/workflows/ros_integration_tests.yml

@@ -11,13 +11,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
-    - '*'
+      - '**'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:
@@ -33,6 +31,12 @@ jobs:
     - name: Git Ownership Workaround
       run: git config --system --add safe.directory '*'
 
+    - name: Update ROS Keys
+      run: |
+        sudo rm /etc/apt/sources.list.d/ros2.list && \
+        sudo curl -sSL https://raw.githubusercontent.com/ros/rosdistro/master/ros.key -o /usr/share/keyrings/ros-archive-keyring.gpg && \
+        echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/ros-archive-keyring.gpg] http://packages.ros.org/ros2/ubuntu $(. /etc/os-release && echo $UBUNTU_CODENAME) main" | sudo tee /etc/apt/sources.list.d/ros2.list > /dev/null
+
     - name: Install gazebo
       run: |
         apt update && apt install -y gazebo11 libgazebo11-dev gstreamer1.0-plugins-bad gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly libgstreamer-plugins-base1.0-dev

.github/workflows/ros_translation_node.yml

@@ -5,13 +5,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 defaults:
   run:
     shell: bash

.github/workflows/sitl_tests.yml

@@ -11,13 +11,11 @@ on:
     - 'main'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
   pull_request:
     branches:
     - '*'
     paths-ignore:
       - 'docs/**'
-      - '.github/**'
 
 jobs:
   build:

.vscode/cmake-variants.yaml

@@ -6,6 +6,11 @@ CONFIG:
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
+    px4_sitl_spacecraft:
+      short: px4_sitl_spacecraft
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_spacecraft
     px4_sitl_nolockstep:
       short: px4_sitl_nolockstep
       buildType: RelWithDebInfo
@@ -301,6 +306,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: holybro_durandal-v1_default
+    holybro_kakuteh7-wing_default:
+      short: holybro_kakuteh7-wing
+      buildType: MinSizeRel
+      settings:
+        CONFIG: holybro_kakuteh7-wing_default
     holybro_kakuteh7dualimu_default:
       short: holybro_kakuteh7dualimu
       buildType: MinSizeRel

CMakeLists.txt

@@ -496,7 +496,6 @@ add_custom_target(uorb_graph DEPENDS ${uorb_graph_config})
 include(bloaty)
 
 
-include(doxygen)
 include(metadata)
 include(package)
 

Makefile

@@ -365,7 +365,7 @@ coverity_scan: px4_sitl_default
 
 # Documentation
 # --------------------------------------------------------------------
-.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata doxygen
+.PHONY: parameters_metadata airframe_metadata module_documentation extract_events px4_metadata
 
 parameters_metadata:
 	@$(MAKE) --no-print-directory px4_sitl_default metadata_parameters ver_gen
@@ -381,12 +381,6 @@ extract_events:
 
 px4_metadata: parameters_metadata airframe_metadata module_documentation extract_events
 
-doxygen:
-	@mkdir -p "$(SRC_DIR)"/build/doxygen
-	@cd "$(SRC_DIR)"/build/doxygen && cmake "$(SRC_DIR)" $(CMAKE_ARGS) -G"$(PX4_CMAKE_GENERATOR)" -DCONFIG=px4_sitl_default -DBUILD_DOXYGEN=ON
-	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/doxygen
-	@touch "$(SRC_DIR)"/build/doxygen/Documentation/.nojekyll
-
 # Style
 # --------------------------------------------------------------------
 .PHONY: check_format format check_newlines

ROMFS/CMakeLists.txt

@@ -216,12 +216,33 @@ foreach(board_extra_file ${OPTIONAL_BOARD_EXTRAS})
 		if(CONFIG_SYSTEMCMDS_BL_UPDATE)
 			# generate rc.board_bootloader_upgrade
 			set(BOARD_FIRMWARE_BIN "${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_bootloader.bin")
-			configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade @ONLY)
+			message(STATUS "ROMFS:  Adding platforms/nuttx/init/rc.board_bootloader_upgrade -> /etc/init.d/rc.board_bootloader_upgrade")
+
+			# Generate the file using configure_file at configure time to a temporary location
+			set(bootloader_upgrade_tmp ${CMAKE_CURRENT_BINARY_DIR}/rc.board_bootloader_upgrade.tmp)
+			configure_file(${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in ${bootloader_upgrade_tmp} @ONLY)
+
+			# Then copy it at build time with proper dependencies
+			add_custom_command(
+				OUTPUT
+					${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade
+					rc.board_bootloader_upgrade.stamp
+				COMMAND ${CMAKE_COMMAND} -E copy_if_different ${bootloader_upgrade_tmp} ${romfs_gen_root_dir}/init.d/rc.board_bootloader_upgrade
+				COMMAND ${CMAKE_COMMAND} -E touch rc.board_bootloader_upgrade.stamp
+				DEPENDS
+					${bootloader_upgrade_tmp}
+					${PX4_SOURCE_DIR}/platforms/nuttx/init/rc.board_bootloader_upgrade.in
+					romfs_copy.stamp
+				COMMENT "ROMFS: copying rc.board_bootloader_upgrade"
+			)
+
+			list(APPEND extras_dependencies
+				rc.board_bootloader_upgrade.stamp
+			)
 		else()
 			# remove bootloader from extras
 			list(REMOVE_ITEM OPTIONAL_BOARD_EXTRAS ${board_extra_file})
 		endif()
-
 	endif()
 endforeach()
 

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -46,3 +46,22 @@ param set-default PWM_MAIN_FUNC3 203
 param set-default PWM_MAIN_FUNC4 101
 
 param set-default EKF2_GPS_DELAY 0
+
+# Rate controllers
+param set-default FW_RR_P 0.0500
+param set-default FW_RR_I 2.0000
+param set-default FW_RR_D 0.0000
+param set-default FW_RR_FF 0.0000
+param set-default FW_RR_IMAX 1.0000
+
+param set-default FW_PR_P 0.0800
+param set-default FW_PR_I 2.5000
+param set-default FW_PR_D 0.0000
+param set-default FW_PR_FF 0.0000
+param set-default FW_PR_IMAX 1.0000
+
+param set-default FW_YR_P 0.0500
+param set-default FW_YR_I 3.0000
+param set-default FW_YR_D 0.0000
+param set-default FW_YR_FF 0.0000
+param set-default FW_YR_IMAX 1.0000

ROMFS/px4fmu_common/init.d-posix/airframes/4009_gz_r1_rover

@@ -15,7 +15,6 @@ param set-default NAV_ACC_RAD 0.5
 
 # Differential Parameters
 param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAX_THR_YAW_R 1.5
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
 
@@ -31,14 +30,16 @@ param set-default RO_YAW_RATE_P 0.25
 param set-default RO_YAW_RATE_LIM 180
 param set-default RO_YAW_ACCEL_LIM 120
 param set-default RO_YAW_DECEL_LIM 1000
+param set-default RO_YAW_RATE_CORR 1.43
 
 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5
 
-# Rover Position Control Parameters
+# Rover Velocity Control Parameters
 param set-default RO_SPEED_LIM 2
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_RED 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d-posix/airframes/4011_gz_lawnmower

@@ -1,51 +1,68 @@
 #!/bin/sh
-# @name Gazebo lawnmower
+# @name Gazebo - Zero Turn Lawnmower
 # @type Rover
 # @class Rover
 
 . ${R}etc/init.d/rc.rover_differential_defaults
 
 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=lawn}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=lawnmower}
 
 param set-default SIM_GZ_EN 1 # Gazebo bridge
 
+param set-default NAV_ACC_RAD 0.5
+
 # We can arm and drive in manual mode when it slides and GPS check fails:
 param set-default COM_ARM_WO_GPS 1
 
-# Rover parameters
+# Differential Parameters
 param set-default RD_WHEEL_TRACK 0.9
-param set-default RD_YAW_RATE_I 0.1
-param set-default RD_YAW_RATE_P 5
-param set-default RD_MAX_ACCEL 1
-param set-default RD_MAX_JERK 3
-param set-default RD_MAX_SPEED 8
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_MAX_YAW_RATE 30
 param set-default RD_TRANS_DRV_TRN 0.349066
 param set-default RD_TRANS_TRN_DRV 0.174533
 
+# Rover Control Parameters
+param set-default RO_ACCEL_LIM 1.5
+param set-default RO_DECEL_LIM 5
+param set-default RO_JERK_LIM 15
+param set-default RO_MAX_THR_SPEED 2.7
+
+# Rover Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.2
+param set-default RO_YAW_RATE_P 1.0
+param set-default RO_YAW_RATE_LIM 60
+param set-default RO_YAW_ACCEL_LIM 50
+param set-default RO_YAW_DECEL_LIM 1000
+param set-default RO_YAW_RATE_CORR 1.0
+
+# Rover Attitude Control Parameters
+param set-default RO_YAW_P 5
+
+# Rover Velocity Control Parameters
+param set-default RO_SPEED_LIM 2.1
+param set-default RO_SPEED_I 0.01
+param set-default RO_SPEED_P 0.1
+param set-defatul RO_SPEED_RED 1.0
+
 # Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
 param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1
 
 # Actuator mapping - set SITL motors/servos output parameters:
 
 # "Motors" - motor channels 0 (Right) and 1 (Left) - via Wheels GZ bridge:
 param set-default SIM_GZ_WH_FUNC1 101 # right wheel
-#param set-default SIM_GZ_WH_MIN1 0
-#param set-default SIM_GZ_WH_MAX1 200
-#param set-default SIM_GZ_WH_DIS1 100
-#param set-default SIM_GZ_WH_FAIL1 100
+param set-default SIM_GZ_WH_MIN1 87
+param set-default SIM_GZ_WH_MAX1 113
+param set-default SIM_GZ_WH_DIS1 100
+param set-default SIM_GZ_WH_FAIL1 100
 
 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
-#param set-default SIM_GZ_WH_MIN2 0
-#param set-default SIM_GZ_WH_MAX2 200
-#param set-default SIM_GZ_WH_DIS2 100
-#param set-default SIM_GZ_WH_FAIL2 100
+param set-default SIM_GZ_WH_MIN2 87
+param set-default SIM_GZ_WH_MAX2 113
+param set-default SIM_GZ_WH_DIS2 100
+param set-default SIM_GZ_WH_FAIL2 100
 
 param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels
 

ROMFS/px4fmu_common/init.d-posix/airframes/4012_gz_rover_ackermann

@@ -30,14 +30,16 @@ param set-default RO_MAX_THR_SPEED 3.1
 param set-default RO_YAW_RATE_I 0.1
 param set-default RO_YAW_RATE_P 1
 param set-default RO_YAW_RATE_LIM 180
+param set-default RO_YAW_RATE_CORR 1
 
 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 3
 
-# Rover Position Control Parameters
+# Rover Velocity Control Parameters
 param set-default RO_SPEED_LIM 3
 param set-default RO_SPEED_I 0.1
 param set-default RO_SPEED_P 1
+param set-default RO_SPEED_RED 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d-posix/airframes/4015_gz_r1_rover_mecanum

@@ -15,8 +15,6 @@ param set-default NAV_ACC_RAD 0.5
 
 # Mecanum Parameters
 param set-default RM_WHEEL_TRACK 0.3
-param set-default RM_MAX_THR_YAW_R 1.2
-param set-default RM_MISS_SPD_GAIN 1
 
 # Rover Control Parameters
 param set-default RO_ACCEL_LIM 3
@@ -30,14 +28,16 @@ param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 120
 param set-default RO_YAW_ACCEL_LIM 240
 param set-default RO_YAW_DECEL_LIM 1000
+param set-default RO_YAW_RATE_CORR 1.75
 
 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 5
 
-# Rover Position Control Parameters
+# Rover Velocity Control Parameters
 param set-default RO_SPEED_LIM 2
 param set-default RO_SPEED_I 0.5
 param set-default RO_SPEED_P 1
+param set-default RO_SPEED_RED 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 0.5

ROMFS/px4fmu_common/init.d-posix/airframes/50000_gz_rover_differential

@@ -0,0 +1,56 @@
+#!/bin/sh
+# @name Generic Differential Rover
+# @type Rover
+# @class Rover
+
+. ${R}etc/init.d/rc.rover_differential_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_differential}
+
+param set-default SIM_GZ_EN 1 # Gazebo bridge
+
+param set-default NAV_ACC_RAD 0.5
+
+# Differential Parameters
+param set-default RD_WHEEL_TRACK 0.6
+param set-default RD_TRANS_DRV_TRN 0.785398
+param set-default RD_TRANS_TRN_DRV 0.174533
+
+# Rate Control Parameters
+param set-default RO_YAW_RATE_I 0.01
+param set-default RO_YAW_RATE_P 0.25
+param set-default RO_YAW_RATE_LIM 250
+param set-default RO_YAW_ACCEL_LIM 400
+param set-default RO_YAW_DECEL_LIM 800
+param set-default RO_YAW_RATE_CORR 1
+
+# Attitude Control Parameters
+param set-default RO_YAW_P 5
+
+# Velocity Control Parameters
+param set-default RO_ACCEL_LIM 4
+param set-default RO_DECEL_LIM 6
+param set-default RO_JERK_LIM 10
+param set-default RO_MAX_THR_SPEED 2
+param set-default RO_SPEED_LIM 1.8
+param set-default RO_SPEED_I 0.01
+param set-default RO_SPEED_P 0.01
+param set-default RO_SPEED_RED 1
+
+# Pure Pursuit parameters
+param set-default PP_LOOKAHD_GAIN 1
+param set-default PP_LOOKAHD_MAX 10
+param set-default PP_LOOKAHD_MIN 1
+
+# Actuator mapping
+param set-default SIM_GZ_WH_FUNC1 101 # right wheel
+param set-default SIM_GZ_WH_MIN1 80
+param set-default SIM_GZ_WH_MAX1 120
+param set-default SIM_GZ_WH_DIS1 100
+
+param set-default SIM_GZ_WH_FUNC2 102 # left wheel
+param set-default SIM_GZ_WH_MIN2 80
+param set-default SIM_GZ_WH_MAX2 120
+param set-default SIM_GZ_WH_DIS2 100

ROMFS/px4fmu_common/init.d-posix/airframes/71001_gazebo-classic_spacecraft_dart

@@ -1,155 +0,0 @@
-#!/bin/sh
-#
-# @name 6DoF Spacecraft Model
-#
-# @type Freeflyer with 8 thrusters
-#
-# @maintainer Pedro Roque <padr@kth.se>
-#
-
-. ${R}etc/init.d/rc.sc_defaults
-
-param set-default CA_AIRFRAME 15
-param set-default MAV_TYPE 99
-
-param set-default CA_THRUSTER_CNT 12
-param set-default CA_R_REV 0
-
-# param set-default FW_ARSP_MODE 1
-
-# Auto to be provided by Custom Airframe
-param set-default CA_METHOD 0
-
-# disable attitude failure detection
-param set-default FD_FAIL_P 0
-param set-default FD_FAIL_R 0
-
-# Set proper failsafes
-param set-default COM_ACT_FAIL_ACT 0
-param set-default COM_LOW_BAT_ACT 0
-param set-default NAV_DLL_ACT 0
-param set-default GF_ACTION 1
-param set-default NAV_RCL_ACT 1
-param set-default COM_POSCTL_NAVL 2
-
-# Set thrusters
-param set-default CA_THRUSTER0_PX -0.50
-param set-default CA_THRUSTER0_PY 0.50
-param set-default CA_THRUSTER0_PZ 0.0
-param set-default CA_THRUSTER0_CT 0.237
-param set-default CA_THRUSTER0_AX 0.0
-param set-default CA_THRUSTER0_AY -1.0
-param set-default CA_THRUSTER0_AZ 0.0
-
-param set-default CA_THRUSTER1_PX 0.50
-param set-default CA_THRUSTER1_PY 0.50
-param set-default CA_THRUSTER1_PZ 0.0
-param set-default CA_THRUSTER1_CT 0.237
-param set-default CA_THRUSTER1_AX 0.0
-param set-default CA_THRUSTER1_AY -1.0
-param set-default CA_THRUSTER1_AZ 0.0
-
-param set-default CA_THRUSTER2_PX 0.50
-param set-default CA_THRUSTER2_PY -0.50
-param set-default CA_THRUSTER2_PZ 0.0
-param set-default CA_THRUSTER2_CT 0.237
-param set-default CA_THRUSTER2_AX 0.0
-param set-default CA_THRUSTER2_AY 1.0
-param set-default CA_THRUSTER2_AZ 0.0
-
-param set-default CA_THRUSTER3_PX -0.50
-param set-default CA_THRUSTER3_PY -0.50
-param set-default CA_THRUSTER3_PZ 0.0
-param set-default CA_THRUSTER3_CT 0.237
-param set-default CA_THRUSTER3_AX 0.0
-param set-default CA_THRUSTER3_AY 1.0
-param set-default CA_THRUSTER3_AZ 0.0
-
-param set-default CA_THRUSTER4_PX -0.50
-param set-default CA_THRUSTER4_PY 0.0
-param set-default CA_THRUSTER4_PZ -0.50
-param set-default CA_THRUSTER4_CT 0.237
-param set-default CA_THRUSTER4_AX 1.0
-param set-default CA_THRUSTER4_AY 0.0
-param set-default CA_THRUSTER4_AZ 0.0
-
-param set-default CA_THRUSTER5_PX 0.50
-param set-default CA_THRUSTER5_PY 0.0
-param set-default CA_THRUSTER5_PZ -0.50
-param set-default CA_THRUSTER5_CT 0.237
-param set-default CA_THRUSTER5_AX -1.0
-param set-default CA_THRUSTER5_AY 0.0
-param set-default CA_THRUSTER5_AZ 0.0
-
-param set-default CA_THRUSTER6_PX 0.50
-param set-default CA_THRUSTER6_PY 0.0
-param set-default CA_THRUSTER6_PZ 0.50
-param set-default CA_THRUSTER6_CT 0.237
-param set-default CA_THRUSTER6_AX -1.0
-param set-default CA_THRUSTER6_AY 0.0
-param set-default CA_THRUSTER6_AZ 0.0
-
-param set-default CA_THRUSTER7_PX -0.50
-param set-default CA_THRUSTER7_PY 0.0
-param set-default CA_THRUSTER7_PZ 0.50
-param set-default CA_THRUSTER7_CT 0.237
-param set-default CA_THRUSTER7_AX 1.0
-param set-default CA_THRUSTER7_AY 0.0
-param set-default CA_THRUSTER7_AZ 0.0
-
-param set-default CA_THRUSTER8_PX 0.0
-param set-default CA_THRUSTER8_PY -0.50
-param set-default CA_THRUSTER8_PZ -0.50
-param set-default CA_THRUSTER8_CT 0.237
-param set-default CA_THRUSTER8_AX 0.0
-param set-default CA_THRUSTER8_AY 0.0
-param set-default CA_THRUSTER8_AZ 1.0
-
-param set-default CA_THRUSTER9_PX 0.0
-param set-default CA_THRUSTER9_PY 0.50
-param set-default CA_THRUSTER9_PZ -0.50
-param set-default CA_THRUSTER9_CT 0.237
-param set-default CA_THRUSTER9_AX 0.0
-param set-default CA_THRUSTER9_AY 0.0
-param set-default CA_THRUSTER9_AZ 1.0
-
-param set-default CA_THRUSTER10_PX 0.0
-param set-default CA_THRUSTER10_PY 0.50
-param set-default CA_THRUSTER10_PZ 0.50
-param set-default CA_THRUSTER10_CT 0.237
-param set-default CA_THRUSTER10_AX 0.0
-param set-default CA_THRUSTER10_AY 0.0
-param set-default CA_THRUSTER10_AZ -1.0
-
-param set-default CA_THRUSTER11_PX 0.0
-param set-default CA_THRUSTER11_PY -0.50
-param set-default CA_THRUSTER11_PZ 0.50
-param set-default CA_THRUSTER11_CT 0.237
-param set-default CA_THRUSTER11_AX 0.0
-param set-default CA_THRUSTER11_AY 0.0
-param set-default CA_THRUSTER11_AZ -1.0
-
-param set-default PWM_MAIN_FUNC1 101
-param set-default PWM_MAIN_FUNC2 102
-param set-default PWM_MAIN_FUNC3 103
-param set-default PWM_MAIN_FUNC4 104
-param set-default PWM_MAIN_FUNC5 105
-param set-default PWM_MAIN_FUNC6 106
-param set-default PWM_MAIN_FUNC7 107
-param set-default PWM_MAIN_FUNC8 108
-param set-default PWM_MAIN_FUNC9 109
-param set-default PWM_MAIN_FUNC10 110
-param set-default PWM_MAIN_FUNC11 111
-param set-default PWM_MAIN_FUNC12 112
-
-# PWM Simulation
-param set PWM_SIM_PWM_MAX 10000
-param set PWM_SIM_PWM_MIN 0
-
-# Controller Tunings
-param set-default SC_ROLLRATE_P 0.14
-param set-default SC_PITCHRATE_P 0.14
-param set-default SC_ROLLRATE_I 0.3
-param set-default SC_PITCHRATE_I 0.3
-param set-default SC_ROLLRATE_D 0.004
-param set-default SC_PITCHRATE_D 0.004

ROMFS/px4fmu_common/init.d-posix/airframes/71002_gz_spacecraft_2d

@@ -20,7 +20,7 @@ param set-default COM_ARM_CHK_ESCS 0  # We don't have ESCs
 param set-default FD_ESCS_EN 0 # We don't have ESCs - but maybe we need this later?
 
 param set-default CA_AIRFRAME 14
-param set-default MAV_TYPE 99
+param set-default MAV_TYPE 45
 
 param set-default CA_THRUSTER_CNT 8
 param set-default CA_R_REV 0

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -114,7 +114,8 @@ px4_add_romfs_files(
 	17001_flightgear_tf-g1
 	17002_flightgear_tf-g2
 
-	71001_gazebo-classic_spacecraft_dart
+	50000_gz_rover_differential
+
 	71002_gz_spacecraft_2d
 
 	# [22000, 22999] Reserve for custom models

ROMFS/px4fmu_common/init.d/airframes/50000_generic_rover_differential

@@ -5,8 +5,5 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_differential_defaults

ROMFS/px4fmu_common/init.d/airframes/50001_aion_robotics_r1_rover

@@ -7,9 +7,6 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_differential_defaults
 
@@ -26,7 +23,6 @@ param set-default NAV_ACC_RAD 0.5
 
 # Differential Parameters
 param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAX_THR_YAW_R 0.7
 param set-default RD_TRANS_DRV_TRN 0.785398
 param set-default RD_TRANS_TRN_DRV 0.139626
 
@@ -42,14 +38,16 @@ param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 250
 param set-default RO_YAW_ACCEL_LIM 600
 param set-default RO_YAW_DECEL_LIM 600
+param set-default RO_YAW_RATE_CORR 2.7
 
 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 2.5
 
-# Rover Position Control Parameters
+# Rover Velocity Control Parameters
 param set-default RO_SPEED_LIM 1.6
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_RED 1
 
 # Pure Pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d/airframes/51000_generic_rover_ackermann

@@ -5,8 +5,5 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_ackermann_defaults

ROMFS/px4fmu_common/init.d/airframes/51001_axial_scx10_2_trail_honcho

@@ -7,9 +7,6 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_ackermann_defaults
 
@@ -33,14 +30,16 @@ param set-default RO_MAX_THR_SPEED 2.8
 param set-default RO_YAW_RATE_I 0.1
 param set-default RO_YAW_RATE_P 0.1
 param set-default RO_YAW_RATE_LIM 120
+param set-default RO_YAW_RATE_CORR 1
 
 # Rover Attitude Control Parameters
 param set-default RO_YAW_P 2.5
 
-# Rover Position Control Parameters
+# Rover Velocity Control Parameters
 param set-default RO_SPEED_LIM 2.5
 param set-default RO_SPEED_I 0.01
 param set-default RO_SPEED_P 0.1
+param set-default RO_SPEED_RED 1
 
 # Pure pursuit parameters
 param set-default PP_LOOKAHD_GAIN 1

ROMFS/px4fmu_common/init.d/airframes/52000_generic_rover_mecanum

@@ -5,8 +5,5 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
 
 . ${R}etc/init.d/rc.rover_mecanum_defaults

ROMFS/px4fmu_common/init.d/airframes/70000_spacecraft_2d

@@ -11,7 +11,7 @@
 . ${R}etc/init.d/rc.sc_defaults
 
 param set-default CA_AIRFRAME 14
-param set-default MAV_TYPE 99
+param set-default MAV_TYPE 45
 
 param set-default CA_THRUSTER_CNT 8
 param set-default CA_R_REV 0

ROMFS/px4fmu_common/init.d/rc.sc_defaults

@@ -3,10 +3,10 @@
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
 
-set VEHICLE_TYPE sc
+set VEHICLE_TYPE spacecraft
 
-# MAV_TYPE_QUADROTOR 2
-#param set-default MAV_TYPE 12
+# MAV_TYPE_SPACECRAFT_ORBITTER
+param set-default MAV_TYPE 45
 
 # Set micro-dds-client to use ethernet and IP-address 192.168.0.1
 param set-default UXRCE_DDS_AG_IP -1062731775

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -234,6 +234,7 @@ then
 		lis3mdl -X -q -a 0x1c start
 	fi
 	qmc5883l -X -q start
+	qmc5883p -X -q start
 	rm3100 -X -q start
 
 	# start last (wait for possible icm20948 passthrough mode)

ROMFS/px4fmu_common/init.d/rc.vehicle_setup

@@ -68,6 +68,15 @@ then
 	. ${R}etc/init.d/rc.vtol_apps
 fi
 
+#
+# Spapcecraft setup.
+#
+if [ $VEHICLE_TYPE = spacecraft ]
+then
+	# Start standard multicopter apps.
+	. ${R}etc/init.d/rc.sc_apps
+fi
+
 #
 # Airship setup.
 #

ROMFS/px4fmu_common/init.d/rcS

@@ -280,6 +280,14 @@ else
 	#
 	send_event start
 
+	#
+	# Start the hardfault streamer.
+	#
+	if param compare -s SYS_HF_MAV 1
+	then
+		hardfault_stream start
+	fi
+
 	#
 	# Start the resource load monitor.
 	#

Tools/astyle/check_newlines.sh

@@ -3,14 +3,14 @@
 return_value=0
 
 # Check if there are files checked in that don't end in a newline (POSIX requirement)
-git grep --cached -Il '' -- ':!docs/*' | xargs -L1 bash -c 'if test "$(tail -c 1 "$0")"; then echo "No new line at end of $0"; exit 1; fi'
+git grep --cached -Il '' -- ':!docs/public/' ':!docs/ko/' ':!docs/uk/' ':!docs/zh/' | xargs -L1 bash -c 'if test "$(tail -c 1 "$0")"; then echo "No new line at end of $0"; exit 1; fi'
 
 if [ $? -ne 0 ]; then
 	return_value=1
 fi
 
 # Check if there are files checked in that have duplicate newlines at the end (fail trailing whitespace checks)
-git grep --cached -Il '' -- ':!docs/*' | xargs -L1 bash -c 'if tail -c 2 "$0" | ( read x && read y && [ x"$x" = x ] && [ x"$y" = x ]); then echo "Multiple newlines at the end of $0"; exit 1; fi'
+git grep --cached -Il '' -- ':!docs/public/' ':!docs/ko/' ':!docs/uk/' ':!docs/zh/' | xargs -L1 bash -c 'if tail -c 2 "$0" | ( read x && read y && [ x"$x" = x ] && [ x"$y" = x ]); then echo "Multiple newlines at the end of $0"; exit 1; fi'
 
 if [ $? -ne 0 ]; then
 	return_value=1

Tools/ci/generate_board_targets_json.py

@@ -35,6 +35,7 @@ if args.filter:
     for board in args.filter.split(','):
         board_filter.append(board)
 
+default_container = 'ghcr.io/px4/px4-dev:v1.16.0-rc1-258-g0369abd556'
 build_configs = []
 grouped_targets = {}
 excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
@@ -86,7 +87,7 @@ def process_target(px4board_file, target_name):
     assert platform, f"PLATFORM not found in {px4board_file}"
 
     if platform not in excluded_platforms:
-        container = 'ghcr.io/px4/px4-dev:v1.16.0-ondemand'
+        container = default_container
         if platform == 'posix':
             group = 'base'
             if toolchain:
@@ -120,7 +121,7 @@ if(verbose):
 # - Events
 metadata_targets = ['airframe_metadata', 'parameters_metadata', 'extract_events']
 grouped_targets['base'] = {}
-grouped_targets['base']['container'] = 'ghcr.io/px4/px4-dev:v1.16.0-ondemand'
+grouped_targets['base']['container'] = default_container
 grouped_targets['base']['manufacturers'] = {}
 grouped_targets['base']['manufacturers']['px4'] = []
 grouped_targets['base']['manufacturers']['px4'] += metadata_targets

Tools/docker_run.sh

@@ -15,7 +15,7 @@ fi
 
 # otherwise default to nuttx
 if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev:v1.16.0-ondemand"
+	PX4_DOCKER_REPO="px4io/px4-dev:v1.16.0-rc1-258-g0369abd556"
 fi
 
 echo "PX4_DOCKER_REPO: $PX4_DOCKER_REPO";

Tools/setup/requirements.txt

@@ -27,3 +27,4 @@ six>=1.12.0
 toml>=0.9
 sympy>=1.10.1
 pycryptodome
+lark

Tools/simulation/gz

@@ -1 +1 @@
-Subproject commit e05f4312d3f28aa621157610584a4870406cb6d3
+Subproject commit 929d55e8832fcd1a1432d2ae1b36601455ec7ed7

boards/ark/fmu-v6x/default.px4board

@@ -62,6 +62,7 @@ CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y

boards/auterion/fmu-v6s/default.px4board

@@ -43,6 +43,7 @@ CONFIG_FIGURE_OF_EIGHT=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y

boards/cuav/7-nano/default.px4board

@@ -20,6 +20,7 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
@@ -42,8 +43,8 @@ CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
-CONFIG_MODULES_FW_MODE_MANAGER=y
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_MODE_MANAGER=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y

boards/cuav/7-nano/init/rc.board_sensors

@@ -12,10 +12,17 @@ else
 fi
 
 iim42652 -s -R 22 start
-bmi088 -A -R 29 -s start
-bmi088 -G -R 29 -s start
 
-ist8310 -I -R 18 start
+bmi088 -A -R 29 -s start
+if ! bmi088 -G -R 29 -s start
+then
+	iim42653 -s -b 2 -R 22 start
+fi
+
+if ! ist8310 -I -R 18 start
+then
+	iis2mdc -I -R 37 start
+fi
 
 bmp581 -s start
 icp201xx -I start

boards/cuav/7-nano/src/spi.cpp

@@ -42,6 +42,7 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortG, GPIO::Pin2}, SPI::DRDY{GPIO::PortG, GPIO::Pin3}),
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+		initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortD, GPIO::Pin12}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
 	}, {GPIO::PortI, GPIO::Pin11}),
 	// initSPIBus(SPI::Bus::SPI3,{
 	// 	// no devices

boards/diatone/mamba-f405-mk2/default.px4board

@@ -14,6 +14,7 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU9250=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_MAGNETOMETER_AKM_AK8963=y
 CONFIG_DRIVERS_MAGNETOMETER_HMC5883=y
 CONFIG_DRIVERS_PWM_OUT=y

boards/diatone/mamba-f405-mk2/init/rc.board_sensors

@@ -5,14 +5,16 @@
 
 board_adc start
 
-if ! mpu6000 -R 6 -s start
-then
+if ! mpu6000 -R 6 -s start; then
 	# some boards such as the Hobbywing XRotor F4 G2 use the ICM-20602
-	icm20602 -s -R 6 start
+	if ! icm20602 -s -R 6 start; then
+		# The ICM-42688-P is used on the Diatone Mamba F405 MK2 v2
+		icm42688p -s -R 4 start
+	fi
 fi
 
 if ! hmc5883 -T -X start
-then	
+then
 	if mpu9250_i2c -X -b 2 -a 0x68 -R 28 start; then
 		sleep 1 # wait for mpu9250 to be configured with bypass enabled
 		ak8963 -X -b 2 -R 30 start # -R 34

boards/diatone/mamba-f405-mk2/src/spi.cpp

@@ -39,6 +39,7 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 	initSPIBus(SPI::Bus::SPI1, {
 		initSPIDevice(DRV_IMU_DEVTYPE_MPU6000, SPI::CS{GPIO::PortA, GPIO::Pin4}),
 		initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortA, GPIO::Pin4}),
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin4}),
 	}),
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),

boards/holybro/kakuteh7-wing/default.px4board

@@ -5,6 +5,8 @@ CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
+CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
 CONFIG_DRIVERS_BAROMETER_GOERTEK_SPA06=y
@@ -61,7 +63,6 @@ CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y

boards/holybro/kakuteh7-wing/src/hw_config.h

@@ -74,7 +74,7 @@
 #define BOARD_TYPE                     1105
 #define BOARD_FLASH_SECTORS            (14)
 #define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE           (1 * 128 * 1024)
+#define APP_RESERVATION_SIZE           (2 * 128 * 1024)
 
 #define OSC_FREQ                       16
 

boards/holybro/kakuteh7dualimu/default.px4board

@@ -6,6 +6,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS5"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
@@ -30,7 +31,6 @@ CONFIG_DRIVERS_UAVCAN=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=6
 CONFIG_MODULES_AIRSPEED_SELECTOR=y
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
@@ -70,22 +70,17 @@ CONFIG_MODULES_NAVIGATOR=y
 CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+# CONFIG_MODULES_TEMPERATURE_COMPENSATION is not set
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
-CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
-CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
 CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
 CONFIG_SYSTEMCMDS_UORB=y
 CONFIG_SYSTEMCMDS_USB_CONNECTED=y

boards/holybro/kakuteh7dualimu/firmware.prototype

@@ -7,7 +7,7 @@
     "summary": "KAKUTEH7",
     "version": "0.1",
     "image_size": 0,
-    "image_maxsize": 1835008,
+    "image_maxsize": 1703936,
     "git_identity": "",
     "board_revision": 0
 }

boards/holybro/kakuteh7dualimu/nuttx-config/scripts/script.ld

@@ -110,7 +110,7 @@
 MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
-	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1664K /* params in last two sectors */
 
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K

boards/holybro/kakuteh7dualimu/src/hw_config.h

@@ -72,7 +72,7 @@
 #define BOARD_TYPE                     5409
 #define BOARD_FLASH_SECTORS            (14)
 #define BOARD_FLASH_SIZE               (16 * 128 * 1024)
-#define APP_RESERVATION_SIZE           (1 * 128 * 1024)
+#define APP_RESERVATION_SIZE           (2 * 128 * 1024)
 
 #define OSC_FREQ                       8
 

boards/holybro/kakuteh7dualimu/src/led.c

@@ -48,6 +48,11 @@
  * of leds for system indication at will and there is no
  * separate switch, we need to build independent of the
  * CONFIG_ARCH_LEDS configuration switch.
+ *
+ * KakuteH7 DualIMU LED configuration:
+ * - Red LED (PE9): TRIP LED, active high
+ * - Blue LED (PC2): Status LED, active low
+ * - Green LED: Hardware controlled, always on when powered (no software control)
  */
 __BEGIN_DECLS
 extern void led_init(void);
@@ -56,11 +61,28 @@ extern void led_off(int led);
 extern void led_toggle(int led);
 __END_DECLS
 
+#ifdef CONFIG_ARCH_LEDS
+static bool nuttx_owns_leds = true;
+//                                B  R  S  G
+//                                0  1  2  3
+static const uint8_t xlatpx4[] = {1, 0, 4, 2};
+#  define xlat(p) xlatpx4[(p)]
+static uint32_t g_ledmap[] = {
+	GPIO_LED_RED,                       // Indexed by BOARD_LED_RED
+	GPIO_nLED_BLUE,                     // Indexed by BOARD_LED_BLUE
+};
 
-#define xlat(p) (p)
+static bool g_led_inverted[] = {
+	false, // LED_RED is active high
+	true,  // LED_BLUE is active low
+};
+
+#else
+
+#  define xlat(p) (p)
 static uint32_t g_ledmap[] = {
 	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
-	GPIO_LED_RED,                      // Indexed by LED_RED
+	GPIO_LED_RED,                       // Indexed by LED_RED
 };
 
 static bool g_led_inverted[] = {
@@ -68,6 +90,7 @@ static bool g_led_inverted[] = {
 	false, // LED_RED is active high
 };
 
+#endif
 
 __EXPORT void led_init(void)
 {

boards/px4/fmu-v2/rover.px4board

@@ -1,15 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_DRIVERS_CAMERA_CAPTURE=y
-CONFIG_DRIVERS_CAMERA_TRIGGER=y
-CONFIG_DRIVERS_OPTICAL_FLOW_PX4FLOW=y
-CONFIG_MODULES_CAMERA_FEEDBACK=y
-CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_ROVER_POS_CONTROL=y
-CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_SYSTEMCMDS_PERF=y
-CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
-CONFIG_SYSTEMCMDS_WORK_QUEUE=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v3/rover.px4board

@@ -0,0 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
+CONFIG_MODULES_MC_POS_CONTROL=n
+CONFIG_MODULES_MC_RATE_CONTROL=n
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v4/rover.px4board

@@ -0,0 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
+CONFIG_MODULES_MC_POS_CONTROL=n
+CONFIG_MODULES_MC_RATE_CONTROL=n
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v4pro/rover.px4board

@@ -0,0 +1,17 @@
+CONFIG_MODULES_AIRSPEED_SELECTOR=n
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
+CONFIG_MODULES_FW_ATT_CONTROL=n
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_FW_MODE_MANAGER=n
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
+CONFIG_MODULES_FW_RATE_CONTROL=n
+CONFIG_MODULES_MC_ATT_CONTROL=n
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
+CONFIG_MODULES_MC_POS_CONTROL=n
+CONFIG_MODULES_MC_RATE_CONTROL=n
+CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_MODULES_ROVER_ACKERMANN=y
+CONFIG_MODULES_ROVER_DIFFERENTIAL=y
+CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v5/rover.px4board

@@ -1,23 +1,17 @@
-CONFIG_DRIVERS_IRLOCK=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_UUV_ATT_CONTROL=n
-CONFIG_MODULES_UUV_POS_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v5x/default.px4board

@@ -64,6 +64,7 @@ CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y

boards/px4/fmu-v5x/rover.px4board

@@ -1,4 +1,3 @@
-CONFIG_DRIVERS_IRLOCK=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
@@ -6,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -14,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6c/rover.px4board

@@ -5,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -13,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6u/rover.px4board

@@ -5,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -13,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6x/default.px4board

@@ -62,6 +62,7 @@ CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
 CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y

boards/px4/fmu-v6x/rover.px4board

@@ -5,7 +5,6 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
@@ -13,7 +12,6 @@ CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/px4/fmu-v6xrt/default.px4board

@@ -63,6 +63,7 @@ CONFIG_MODULES_FW_RATE_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_HARDFAULT_STREAM=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y

boards/px4/fmu-v6xrt/rover.px4board

@@ -1,4 +1,3 @@
-CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_SF45_SERIAL=n
 CONFIG_MODULES_AIRSPEED_SELECTOR=n
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
 CONFIG_MODULES_FW_ATT_CONTROL=n
@@ -6,16 +5,14 @@ CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_FW_MODE_MANAGER=n
 CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=n
 CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_MC_ATT_CONTROL=n
 CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
 CONFIG_MODULES_MC_POS_CONTROL=n
 CONFIG_MODULES_MC_RATE_CONTROL=n
 CONFIG_MODULES_VTOL_ATT_CONTROL=n
+CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_SF45_SERIAL=n
 CONFIG_DRIVERS_ROBOCLAW=y
-# CONFIG_EKF2_WIND is not set
 CONFIG_MODULES_ROVER_ACKERMANN=y
 CONFIG_MODULES_ROVER_DIFFERENTIAL=y
 CONFIG_MODULES_ROVER_MECANUM=y

boards/zeroone/x6/CMakeLists.txt

@@ -31,6 +31,4 @@
 #
 ############################################################################
 
-add_subdirectory(AutoMode)
-add_subdirectory(ManualMode)
-add_subdirectory(OffboardMode)
+add_subdirectory(pwm_voltage)

boards/zeroone/x6/default.px4board

@@ -20,6 +20,9 @@ CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM45686=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
+CONFIG_DRIVERS_IMU_MURATA_SCH16T=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_COMMON_INS=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y

boards/zeroone/x6/init/rc.board_defaults

@@ -27,3 +27,6 @@ else
 fi
 
 safety_button start
+
+# pwm voltage 3.3V/5V switch
+pwm_voltage_apply start

boards/zeroone/x6/init/rc.board_sensors

@@ -43,6 +43,7 @@ then
 	set INA_CONFIGURED yes
 fi
 
+
 if param compare SENS_EN_INA238 1
 then
 	# Start Digital power monitors
@@ -55,96 +56,35 @@ then
 	set INA_CONFIGURED yes
 fi
 
-#Start Auterion Power Module selector for zeroone boards
-if ver hwbasecmp 009 010 011
+
+if ver hwtypecmp ZeroOneX6000
 then
-	pm_selector_auterion start
-else
-	if [ $INA_CONFIGURED = no ]
-	then
-		# INA226, INA228, INA238 auto-start
-		i2c_launcher start -b 1
-		if [ $HAVE_PM2 = yes ]
-		then
-			i2c_launcher start -b 2
-		fi
-	fi
+        # Internal SPI bus icm45686 with SPIX
+	icm45686 -b 2 -s -R 6 start       //X6 & X6 air
+
+	bmi088 -A -R 4 -s start           //X6
+	bmi088 -G -R 4 -s start           //X6
+
+	# Internal SPI bus icm45686 with SPIX
+	icm45686 -b 1 -s -R 8 start       //X6 & X6 air
 fi
 
-# Keep nesting shallow
-if ver hwtypecmp V6X006 V6X008
+
+if ver hwtypecmp ZeroOneX6001             //X6  PRO
 then
-	if ver hwtypecmp V6X006
-	then
-		# Internal SPI bus ICM45686
-		adis16470 -s -R 0 start
-		iim42652 -s -R 6 start
-		icm45686 -s -R 10 start
-	else
-		# Internal SPI bus 3x ICM45686
-		icm45686 -b 3 -s -R 0 start
-		icm45686 -b 2 -s -R 0 start
-		icm45686 -b 1 -s -R 10 start
-	fi
-else
-	if ver hwtypecmp V6X004
-	then
-		# Internal SPI bus ICM20649
-		icm20649 -s -R 6 start
-	else
-		# Internal SPI BMI088
-		if ver hwbasecmp 009 010 011
-		then
-			bmi088 -A -R 6 -s start
-			bmi088 -G -R 6 -s start
-		else
-			if ver hwtypecmp V6X010
-			then
-				bmi088 -A -R 0 -s start
-				bmi088 -G -R 0 -s start
-			else
-				bmi088 -A -R 4 -s start
-				bmi088 -G -R 4 -s start
-			fi
-		fi
-	fi
+	# Internal SPI bus IIM42653 with SPIX
+	iim42653 -b 2 -s -R 6 start
 
-	# Internal SPI bus ICM42688p
-	if ver hwbasecmp 009 010 011
-	then
-		icm42688p -R 12 -s start
-	else
-		if ver hwtypecmp V6X010
-		then
-			icm42688p -R 14 -s start
-		else
-			icm45686 -b 1 -s -R 8 start        //ZeroOne
-		fi
-	fi
+	bmi088 -A -R 4 -s start
+	bmi088 -G -R 4 -s start
 
-	if ver hwtypecmp V6X003 V6X004
-	then
-		# Internal SPI bus ICM-42670-P (hard-mounted)
-		icm42670p -R 10 -s start
-	else
-		if ver hwbasecmp 009 010 011
-		then
-			icm20602 -R 6 -s start
-		else
-			# Internal SPI bus ICM-20649 (hard-mounted)
-			icm45686 -b 2 -s -R 6 start        //ZeroOne
-		fi
-	fi
+	# Internal SPI bus IIM42653 with SPIX
+	iim42653 -b 1 -s -R 8 start
 fi
+
+
 rm3100 -I -b 4 start
 # Internal magnetometer on I2c
-# if ver hwtypecmp V6X001
-# then
-# 	rm3100 -I -b 4 start
-# else
-# 	# Internal magnetometer on I2C
-# 	bmm150 -I -R 0 start
-# fi
 
 # External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
 ist8310 -X -b 1 -R 10 start
@@ -156,24 +96,9 @@ ist8310 start -I -a 0x0E -R 12
 if param compare SENS_INT_BARO_EN 1
 then
 	icp201xx -I -a 0x64 start
-	# if ver hwtypecmp V6X001 V6X006 V6X008
-	# then
-	# 	icp201xx -I -a 0x64 start
-	# else
-	# 	bmp388 -I -a 0x77 start
-	# fi
 fi
 icp201xx -X start
 #external baro
-# if ver hwtypecmp V6X001
-# then
-# 	icp201xx -X start
-# else
-# 	bmp388 -X start
-# fi
-
-# Baro on I2C3
-ms5611 -X start
 
 unset INA_CONFIGURED
 unset HAVE_PM2

boards/zeroone/x6/pwm_voltage/CMakeLists.txt

@@ -31,8 +31,12 @@
 #
 ############################################################################
 
-px4_add_library(OffboardMode
-	OffboardMode.cpp
-)
+px4_add_module(
+	MODULE modules__pwm_voltage_apply
+	MAIN pwm_voltage_apply
 
-target_include_directories(OffboardMode PUBLIC ${CMAKE_CURRENT_SOURCE_DIR})
+	SRCS
+		pwm_voltage.cpp
+	DEPENDS
+		px4_work_queue
+	)

boards/zeroone/x6/pwm_voltage/parameters.c

@@ -0,0 +1,43 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * Control PWM output voltage
+ *
+ * @value 0 3.3V
+ * @value 1 5.0V
+ *
+ * @reboot_required true
+ * @group PWM Outputs
+ */
+PARAM_DEFINE_INT32(PWM_VOLT_SEL, 0);

boards/zeroone/x6/pwm_voltage/pwm_voltage.cpp

@@ -0,0 +1,56 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2025 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <inttypes.h>
+#include <stdint.h>
+
+#include <px4_platform_common/getopt.h>
+#include <px4_platform_common/module_params.h>
+
+#include "board_config.h"
+
+extern "C" int pwm_voltage_apply_main(int argc, char *argv[])
+{
+	int32_t pwm_volt_sel = 0;
+
+	param_get(param_find("PWM_VOLT_SEL"), &pwm_volt_sel);
+
+	if (pwm_volt_sel != 0) {
+		PWM_5V_VOLT_SEL(true);
+
+	} else {
+		PWM_5V_VOLT_SEL(false);
+	}
+
+	return 0;
+}

boards/zeroone/x6/src/board_config.h

@@ -215,10 +215,11 @@
 #define GPIO_HW_VER_SENSE      /* PH3 */  GPIO_ADC3_INP14
 #define HW_INFO_INIT_PREFIX    "ZeroOneX6"
 
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2
+#define BOARD_NUM_SPI_CFG_HW_VERSIONS 3
 //                 Base/FMUM
-#define ZeroOneX6_0     HW_FMUM_ID(0x0)   // ZeroOneX6,     Sensor Set  Rev 0
-#define ZeroOneX6_1     HW_FMUM_ID(0x1)   // ZeroOneX6,     Sensor Set  Rev 1
+#define ZeroOneX6_0     HW_FMUM_ID(0x0)   // ZeroOneX6,
+#define ZeroOneX6_1     HW_FMUM_ID(0x1)   // ZeroOneX6 Pro,
+#define ZeroOneX6_2     HW_FMUM_ID(0x2)   // reserved
 
 #define UAVCAN_NUM_IFACES_RUNTIME  1
 
@@ -244,6 +245,10 @@
  */
 #define DIRECT_PWM_OUTPUT_CHANNELS   9
 
+/* PWM Power */
+#define GPIO_PWM_VOLT_SEL               /* PD15  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN6)
+#define PWM_5V_VOLT_SEL(on_true)        px4_arch_gpiowrite(GPIO_PWM_VOLT_SEL, (on_true))
+
 /* Power supply control and monitoring GPIOs */
 
 #define GPIO_nPOWER_IN_A                /* PG1  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN1)
@@ -457,7 +462,8 @@
 		GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
 		GPIO_SAFETY_SWITCH_IN,            \
 		GPIO_PG6,                         \
-		GPIO_nARMED_INIT                  \
+		GPIO_nARMED_INIT,                 \
+		GPIO_PWM_VOLT_SEL                \
 	}
 
 #define BOARD_ENABLE_CONSOLE_BUFFER

boards/zeroone/x6/src/spi.cpp

@@ -47,10 +47,6 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 			initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin8}, SPI::DRDY{GPIO::PortI, GPIO::Pin7}),
 			initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
 		}, {GPIO::PortE, GPIO::Pin7}),
-		//  initSPIBus(SPI::Bus::SPI4, {
-		//    // no devices
-		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
-		//  }, {GPIO::PortG, GPIO::Pin8}),
 		initSPIBus(SPI::Bus::SPI5, {
 			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
 		}),
@@ -60,21 +56,36 @@ constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSION
 		}),
 	}),
 
-	initSPIFmumID(ZeroOneX6_1, {            // Placeholder
+	initSPIFmumID(ZeroOneX6_1, {            // X6 Pro
 		initSPIBus(SPI::Bus::SPI1, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM45686, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
 		}, {GPIO::PortI, GPIO::Pin11}),
 		initSPIBus(SPI::Bus::SPI2, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM45686, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
 		}, {GPIO::PortF, GPIO::Pin4}),
 		initSPIBus(SPI::Bus::SPI3, {
 			initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin8}, SPI::DRDY{GPIO::PortI, GPIO::Pin7}),
-			initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin4}),
+			initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
+		}, {GPIO::PortE, GPIO::Pin7}),
+		initSPIBus(SPI::Bus::SPI5, {
+			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
+		}),
+		initSPIBusExternal(SPI::Bus::SPI6, {
+			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
+			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
+		}),
+	}),
+
+	initSPIFmumID(ZeroOneX6_2, {             // reserved
+		initSPIBus(SPI::Bus::SPI1, {
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42653, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+		}, {GPIO::PortI, GPIO::Pin11}),
+		initSPIBus(SPI::Bus::SPI2, {
+			initSPIDevice(DRV_IMU_DEVTYPE_SCH16T, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+		}, {GPIO::PortF, GPIO::Pin4}),
+		initSPIBus(SPI::Bus::SPI3, {
+			initSPIDevice(DRV_IMU_DEVTYPE_SCH16T, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
 		}, {GPIO::PortE, GPIO::Pin7}),
-		//  initSPIBus(SPI::Bus::SPI4, {
-		//    // no devices
-		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
-		//  }, {GPIO::PortG, GPIO::Pin8}),
 		initSPIBus(SPI::Bus::SPI5, {
 			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
 		}),

cmake/doxygen.cmake

@@ -1,61 +0,0 @@
-############################################################################
-#
-#   Copyright (c) 2019 PX4 Development Team. All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name PX4 nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Doxygen
-
-option(BUILD_DOXYGEN "Build doxygen documentation" OFF)
-
-if (BUILD_DOXYGEN)
-	find_package(Doxygen)
-	if (DOXYGEN_FOUND)
-	    # set input and output files
-	    set(DOXYGEN_IN ${CMAKE_SOURCE_DIR}/Documentation/Doxyfile.in)
-	    set(DOXYGEN_OUT ${CMAKE_CURRENT_BINARY_DIR}/Doxyfile)
-
-	    # request to configure the file
-	    configure_file(${DOXYGEN_IN} ${DOXYGEN_OUT} @ONLY)
-
-	    # note the option ALL which allows to build the docs together with the application
-	    add_custom_target(doxygen ALL
-	        COMMAND ${DOXYGEN_EXECUTABLE} ${DOXYGEN_OUT}
-	        WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
-			COMMENT "Generating documentation with Doxygen"
-			DEPENDS uorb_msgs parameters
-			VERBATIM
-			USES_TERMINAL
-			)
-
-	else()
-		message("Doxygen needs to be installed to generate documentation")
-	endif()
-endif()

docs/.gitignore

@@ -18,4 +18,4 @@ yarn-error.log
 
 
 # Generated alternative _summary.md
-# **/*/_summary.md
+# **/*/_summary.md

docs/.vitepress/theme/components/Redirect.vue

@@ -16,4 +16,4 @@
             document.location.replace(this.to);
         }
     }
-</script>
+</script>

docs/.vitepress/theme/style.css

@@ -159,4 +159,4 @@
 
  .vp-doc img {
   display: inline; /* block by default set by vitepress */
-}
+}

docs/CNAME

@@ -1 +1 @@
-docs.px4.io
+docs.px4.io

docs/_link_checker_sc/ignore_errors.json

@@ -1011,4 +1011,4 @@
     },
     "hideReason": "intended"
   }
-]
+]

docs/_link_checker_sc/ignorefile.json

@@ -1 +1 @@
-["en/_sidebar.md"]
+["en/_sidebar.md"]