fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-05-18 00:47:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
39,886 Commits 852 Branches 161 Tags
pr-gps_heading_fusion_separate
Commit Graph

1285 Commits

Author SHA1 Message Date
Daniel Agar 9b2b5386b0 WIP: sensor_gps_relative 2022-02-01 14:16:35 -05:00
Daniel Agar 55224b85e7 Merge remote-tracking branch 'px4/master' into pr-land_detector_vehicle_at_rest 2022-02-01 11:33:12 -05:00
mcsauder e554f0174d Format whitespace and group checkall() methods together in geofence class. 2022-01-31 21:01:03 -05:00
Daniel Agar 90358f078f add odometry reset counter (ekf2, mavlink, etc) 2022-01-31 09:19:36 -05:00
CUAVmengxiao 425d03d909 msg: Add full_charge_capacity_wh 2022-01-26 13:44:48 -05:00
Roman Dvořák c8349811d1 Enable logging of mavlink tunnel messages 
Co-authored-by: Vit Hanousek <vithanousek@seznam.cz>
 2022-01-26 11:10:43 -05:00
Daniel Agar bbf3b7ac9d move vehicle at reset detection ekf2 -> land_detector 
Co-authored-by:: bresch <brescianimathieu@gmail.com>
 2022-01-18 12:57:04 -05:00
Thomas Stastny 3b6c9448aa npfg: fix format CMakeLists 2022-01-14 22:05:53 +01:00
Thomas Stastny 082e320191 integrate optional NPFG library for wind-aware fixed-wing guidance 2022-01-14 22:05:53 +01:00
Claudio Micheli 8a01135a93 Commander: more changes to use events with escs and battery failures 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2022-01-13 08:40:34 +01:00
Claudio Micheli d122513197 extend support for Battery status message 
Signed-off-by: Claudio Micheli <claudio@auterion.com>
 2022-01-13 08:40:34 +01:00
Julian Oes 9fe7a40673 manual_control: enable sending camera commands 2022-01-10 23:04:10 -05:00
Julian Oes 860b23dd17 tunes: add tune to power off 
This is used by the ATL Mantis EDU to help the user realize when the
drone is powered off.
 2022-01-10 23:04:10 -05:00
Daniel Agar e731fcdbc0 sensors (accel/gyro/mag) determine if external with device id 2022-01-10 10:31:07 -05:00
Matthias Grob bbb04ab4b8 Remove relaying of maximum altitude through land detector 2022-01-05 14:54:59 +01:00
honglang b60e59d9be msg: new sensor_hygrometer msg 2021-12-27 12:13:09 -05:00
Beat Küng 4c80adfaf1 control_allocator: implement trim + slew rate limits configuration 2021-12-24 20:06:13 -05:00
Beat Küng 1901edf13c actuator_motors.msg: add reversible flags & implement in mixer_module 2021-12-24 20:06:13 -05:00
Matthias Grob f68ae39840 Commander: avoid RC actions during calibration 2021-12-22 09:08:23 -05:00
marcojob 2cfe08b3b1 small typo in vehicle_local_position msg 2021-12-17 15:45:07 +01:00
Michael Schaeuble 5ad8b84dec Fix PPS based UTC timestamp in camera trigger and capture messages 
The existing implementation has about 100ms difference to a reference clock. With the changes this error less than 25us.
- Use sensor_gps messages with hrt timestamps as RTC reference and not the system realtime clock. The PPS interrupt can then be aligned with the GPS clock system.
- Keep fallback based on system RTC when no PPS pulse was captured
 2021-12-17 07:56:08 +01:00
Michael Schaeuble ebb657bcf4 Fix camera trigger via MAVLink when camera capture feedback is enabled 
- camera_trigger module always publishes the camera_trigger msg (independent of the camera feedback)
- Use camera_trigger msg and set the feedback flag
- Subscribing modules determine if the message is relevant based on the feedback message
 2021-12-17 07:56:08 +01:00
Igor Mišić 72b1db4a63 pps_capture: implementation of pulse per second capture driver 2021-12-17 07:56:08 +01:00
Thomas Debrunner eb69f15d3a health-flags: Increase health flags to 64 bit bit field to support extended sys status mavlink message 
Add SYS_STATUS flag for parachute
 2021-12-14 09:41:12 -05:00
Beat Küng f76086ffa1 microRTPS_agent_CMakeLists.txt.em: add install section 2021-12-10 09:03:08 -05:00
Matthias Grob ddc6b6bc9c battery: move MAVLink specific handling out of battery class 2021-12-07 21:06:51 +01:00
Daniel Agar 8fbf79527f magnetometer allow setting initial calibration from bias if available and stable 2021-12-01 20:24:56 -05:00
alexklimaj bfd5a90a5d UAVCAN Moving Baseline Working 
Set uavcan publisher priorities

Switch to ardupilot rtcm message and add heading accuracy
 2021-11-30 15:59:08 -05:00
Matthias Grob c522a8b15a Compute RTL time and react if lower than flight time 
- Compute RTL time also during RTL
- Calculate correct altitude when finding destination
 2021-11-24 14:10:24 +01:00
Beat Küng a0e43bca96 msg: remove unused vehicle_actuator_setpoint topic 2021-11-23 12:40:22 -05:00
Beat Küng 21699935e8 vehicle_command: add VEHICLE_CMD_ACTUATOR_TEST and VEHICLE_CMD_CONFIGURE_ACTUATOR 2021-11-23 12:40:22 -05:00
Beat Küng 6fdcc43ea8 mixer_module: add testing for SYS_CTRL_ALLOC=1 with actuator_test cmd+uorb msg 2021-11-23 12:40:22 -05:00
Matthias Grob 3193b554ca Add optional preflight check for healthy MAVLink parachute system 2021-11-19 17:15:04 +01:00
Matthias Grob 43c529f294 Add MAVLink parachute system heartbeat detection 2021-11-19 17:15:04 +01:00
bresch f751dd2242 FlightTask: set yaw_setpoint to NAN when yaw should not be controlled 2021-11-16 18:09:37 -05:00
Matthias Grob 91c48606ee battery_status: clearly define and handle zero remaining flight time 2021-11-15 15:44:02 +01:00
Matthias Grob 54f2e91775 battery_status: report remaining flight time in seconds 
This allows more accurate reporting and is compliant with the
MAVLink interface.
 2021-11-15 15:44:02 +01:00
Matthias Grob 7ec8dd9d23 vehicle_constraints: remove deprecated speed_xy constraint 2021-11-09 21:47:06 -05:00
bresch d47f9f155a MC mixer: replace multirotor_motor_limits by control_allocator_status 
CA: fix saturation computation
Since the CA matrix is normalized, the same scale applied to be used when using the effectiveness matrix

MCRateControl: use control_allocator_status to get saturation info
 2021-11-09 10:35:10 -05:00
Matthias Grob fabf865411 Use backwards compatible manual_control_setpoint instead of manual_control_input 2021-11-09 16:05:25 +01:00
Matthias Grob a593a51f05 Commander: fix mode initialization with RC 2021-11-09 16:05:25 +01:00
Matthias Grob af54ac7cdb ManualControl: remove unused variables and renaming 2021-11-09 16:05:25 +01:00
Matthias Grob a349dae760 Use action_request to command RC VTOL transitions 2021-11-09 16:05:25 +01:00
Matthias Grob 956997eb1e Replace arm_request and mode_request with combined action_request 
Which saves flash space, log size and is extensible to handle e.g.
the VTOL transition and future actions.
 2021-11-09 16:05:25 +01:00
Matthias Grob 052e29267d Use mode_request for RC mode switching 2021-11-09 16:05:25 +01:00
Matthias Grob f8e4846851 Use arm_request for manual killing 2021-11-09 16:05:25 +01:00
Matthias Grob af607e3040 Use separate arm_request instead of vehicle_command for RC arming 2021-11-09 16:05:25 +01:00
Matthias Grob 7a2ef4a917 Commander: don't publish RC_IN_MODE to vehicle_status 
This just contains the content of the parameter which
is redundant and results in multiple sources of truth.
 2021-11-09 16:05:25 +01:00
Matthias Grob 93bed7f670 vehicle_command: shorten arming action/origin enum names 2021-11-09 16:05:25 +01:00
Julian Oes b3a5072de5 commander/manual_control: use msg enum for params 
Instead of using a private enum class we should define the enum in the
vehicle_command message and then use it consistently.
 2021-11-09 16:05:25 +01:00