make demo work with pca.

ucan pwm enablement.
S32K1 fixes.
2026-05-24 12:57:35 +08:00 · 2022-06-01 18:22:23 -04:00 · 2022-06-01 13:36:40 -04:00 · 2022-05-31 16:56:49 -04:00 · 2022-05-26 10:52:08 -04:00 · 2022-05-25 17:44:54 -04:00
687 changed files with 19223 additions and 16919 deletions
@@ -61,18 +61,20 @@ pipeline {
                     "holybro_kakutef7_default",
                     "holybro_kakuteh7_default",
                     "holybro_pix32v5_default",
-                     "matek_h743-slim",
                     "matek_gnss-m9n-f4_canbootloader",
                     "matek_gnss-m9n-f4_default",
+                     "matek_h743-mini_default",
+                     "matek_h743-slim_default",
+                     "matek_h743_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v1_rtps",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-f7_default",
                     "mro_ctrl-zero-f7-oem_default",
-                     "mro_ctrl-zero-h7_default",
-                     "mro_ctrl-zero-h7_rtps",
                     "mro_ctrl-zero-h7-oem_default",
                     "mro_ctrl-zero-h7-oem_rtps",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7_rtps",
                     "mro_pixracerpro_default",
                     "mro_pixracerpro_rtps",
                     "mro_x21-777_default",
@@ -87,25 +89,27 @@ pipeline {
                     "nxp_ucans32k146_canbootloader",
                     "nxp_ucans32k146_default",
                     "omnibus_f4sd_default",
-                     "raspberrypi_pico_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
+                     "px4_fmu-v2_lto",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_default",
                     "px4_fmu-v4pro_default",
+                     "px4_fmu-v5_cyphal",
                     "px4_fmu-v5_debug",
                     "px4_fmu-v5_default",
+                     "px4_fmu-v5_lto",
                     "px4_fmu-v5_rtps",
                     "px4_fmu-v5_stackcheck",
                     "px4_fmu-v5_uavcanv0periph",
-                     "px4_fmu-v5_uavcanv1",
                     "px4_fmu-v5x_default",
                     "px4_fmu-v6c_default",
                     "px4_fmu-v6u_default",
                     "px4_fmu-v6x_default",
                     "px4_io-v2_default",
+                     "raspberrypi_pico_default",
                     "sky-drones_smartap-airlink_default",
                     "spracing_h7extreme_default",
                     "uvify_core_default"
@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'

  resetParameters()

@@ -864,12 +864,15 @@ void printTopics() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener distance_sensor" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener ekf2_timestamps" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener esc_status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_fake_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_pos" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_aid_src_gnss_vel" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_baro_bias" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_global_position" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_gps_status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_test_ratios" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovation_variances" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_innovations" || true'
@@ -1,32 +1,34 @@
 ---
-name: Bug report
+name: 🐛 Bug report
 about: Create a report to help us improve
+labels: bug-report

 ---

-**Describe the bug**
+## Describe the bug
 A clear and concise description of the bug.

-**To Reproduce**
+## To Reproduce
 Steps to reproduce the behavior:
 1. Drone switched on '...'
 2. Uploaded mission '....' (attach QGC mission file)
 3. Took off '....'
 4. See error

-**Expected behavior**
+## Expected behavior
 A clear and concise description of what you expected to happen.

-**Log Files and Screenshots**
+## Log Files and Screenshots
 *Always* provide a link to the flight log file:
 - Download the flight log file from the vehicle ([tutorial](https://docs.px4.io/master/en/getting_started/flight_reporting.html)).
- Share the link to a log showing the problem on [PX4 Flight Review](http://logs.px4.io/).
+- Upload the log to the [PX4 Flight Review](http://logs.px4.io/)
+- Share the link to the log (Copy and paste the URL of the log)

 Add screenshots to help explain your problem.

-**Drone (please complete the following information):**
+## Drone (please complete the following information):
 - Describe the type of drone.
 - Photo of the IMU / autopilot setup if possible.

-**Additional context**
+## Additional context
 Add any other context about the problem here.
@@ -1,19 +1,20 @@
 ---
 name: 🚀 Feature Request
 about: Suggest an idea for this project
+labels: feature-request

 ---

 For general questions please use [PX4 Discuss](http://discuss.px4.io/) or Slack (you can find an invite link on this project README).

-**Describe problem solved by the proposed feature**
+## Describe problem solved by the proposed feature
 A clear and concise description of the problem, if any, this feature will solve. E.g. I'm always frustrated when ...

-**Describe your preferred solution**
+## Describe your preferred solution
 A clear and concise description of what you want to happen.

-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.

-**Additional context**
+## Additional context
 Add any other context or screenshots for the feature request here.
@@ -1,10 +1,13 @@
 ---
 name: ⛔ Support Question
-about: See [PX4 Discuss](http://discuss.px4.io/) for questions about using PX4.
+about: See http://discuss.px4.io/ for questions about using PX4.

 ---

-We use GitHub issues only to discuss PX4 bugs and new features. For
-questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).
+## Attention! Please read the note below
+
+We use GitHub issues only to discuss PX4 bugs and new features.
+
+**For questions about using PX4 or related components, please use [PX4 Discuss](http://discuss.px4.io/).**

 Thanks!
@@ -1,9 +1,11 @@
 ---
 name: ⛔ Documentation Issue
-about: See https://github.com/PX4/Devguide for documentation issues
+about: See https://github.com/PX4/px4_user_guide for documentation issues

 ---

-PX4 has dedicated repositories for developer documentation (https://github.com/PX4/Devguide) and user documentation (https://github.com/PX4/px4_user_guide).
+## Attention! Please read the note below
+
+**Please submit the documentation issue to the [User Guide](https://github.com/PX4/px4_user_guide) repository.**

 Thanks!
@@ -1,17 +1,17 @@
 Please use [PX4 Discuss](http://discuss.px4.io/) or [Slack](http://slack.px4.io/) to align on pull requests if necessary. You can then open draft pull requests to get early feedback.

-**Describe problem solved by this pull request**
-A clear and concise description of the problem this proposed change will solve.
+## Describe problem solved by this pull request
+A clear and concise description of the problem this proposed change will solve. Or, what it will improve.
 E.g. For this use case I ran into...

-**Describe your solution**
+## Describe your solution
 A clear and concise description of what you have implemented.

-**Describe possible alternatives**
+## Describe possible alternatives
 A clear and concise description of alternative solutions or features you've considered.

-**Test data / coverage**
+## Test data / coverage
 How was it tested? What cases were covered? Logs uploaded to https://review.px4.io/ and screenshots of the important plot parts.

-**Additional context**
+## Additional context
 Add any other related context or media.
@@ -21,7 +21,6 @@ jobs:
          ark_can-gps,
          ark_can-rtk-gps,
          ark_cannode,
-          ark_fmu-v6x,
          atl_mantis-edu,
          av_x-v1,
          bitcraze_crazyflie,
@@ -38,8 +37,10 @@ jobs:
          holybro_kakutef7,
          holybro_kakuteh7,
          holybro_pix32v5,
-          matek_h743-slim,
          matek_gnss-m9n-f4,
+          matek_h743,
+          matek_h743-mini,
+          matek_h743-slim,
          modalai_fc-v1,
          modalai_fc-v2,
          mro_ctrl-zero-f7,
@@ -54,7 +55,6 @@ jobs:
          nxp_fmurt1062-v1,
          nxp_ucans32k146,
          omnibus_f4sd,
-          raspberrypi_pico,
          px4_fmu-v2,
          px4_fmu-v3,
          px4_fmu-v4,
@@ -64,6 +64,7 @@ jobs:
          px4_fmu-v6c,
          px4_fmu-v6u,
          px4_fmu-v6x,
+          raspberrypi_pico,
          sky-drones_smartap-airlink,
          spracing_h7extreme,
          uvify_core
@@ -36,14 +36,14 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/drivers/uavcan_v1/libcanard"]
-	path = src/drivers/uavcan_v1/libcanard
-	url = https://github.com/UAVCAN/libcanard.git
-[submodule "src/drivers/uavcan_v1/public_regulated_data_types"]
-	path = src/drivers/uavcan_v1/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types.git
-[submodule "src/drivers/uavcan_v1/legacy_data_types"]
-	path = src/drivers/uavcan_v1/legacy_data_types
+[submodule "src/drivers/cyphal/libcanard"]
+	path = src/drivers/cyphal/libcanard
+	url = https://github.com/opencyphal/libcanard.git
+[submodule "src/drivers/cyphal/public_regulated_data_types"]
+	path = src/drivers/cyphal/public_regulated_data_types
+	url = https://github.com/opencyphal/public_regulated_data_types.git
+[submodule "src/drivers/cyphal/legacy_data_types"]
+	path = src/drivers/cyphal/legacy_data_types
 	url = https://github.com/PX4/public_regulated_data_types.git
 	branch = legacy
 [submodule "src/lib/crypto/monocypher"]
@@ -131,16 +131,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_cannode_canbootloader
-    ark_fmu-v6x_bootloader:
-      short: ark_fmu-v6x_bootloader
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_bootloader
-    ark_fmu-v6x_default:
-      short: ark_fmu-v6x_default
-      buildType: MinSizeRel
-      settings:
-        CONFIG: ark_fmu-v6x_default
    atl_mantis-edu_default:
      short: atl_mantis-edu
      buildType: MinSizeRel
@@ -99,7 +99,7 @@
 #
 #=============================================================================

-cmake_minimum_required(VERSION 3.2 FATAL_ERROR)
+cmake_minimum_required(VERSION 3.9 FATAL_ERROR)

 set(PX4_SOURCE_DIR "${CMAKE_CURRENT_SOURCE_DIR}" CACHE FILEPATH "PX4 source directory" FORCE)
 set(PX4_BINARY_DIR "${CMAKE_CURRENT_BINARY_DIR}" CACHE FILEPATH "PX4 binary directory" FORCE)
@@ -234,6 +234,14 @@ message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")
 #
 project(px4 CXX C ASM)

+# Check if LTO option and check if toolchain supports it
+if(LTO)
+    include(CheckIPOSupported)
+    check_ipo_supported()
+    message(AUTHOR_WARNING "LTO enabled: LTO is highly experimental and should not be used in production")
+    set(CMAKE_INTERPROCEDURAL_OPTIMIZATION TRUE)
+endif()
+
 set(package-contact "px4users@googlegroups.com")

 set(CMAKE_CXX_STANDARD 14)
@@ -37,8 +37,8 @@ menu "Toolchain"
        help
            forces nolockstep behaviour, despite REPLAY env variable

-    config BOARD_LINUX_TARGET
-        bool "Linux OS Target"
+    config BOARD_LINUX
+        bool "Linux OS"
        depends on PLATFORM_POSIX
        help
            Board Platform is running the Linux operating system
@@ -51,6 +51,13 @@ menu "Toolchain"
        string "Architecture"
        default ""

+    config BOARD_LTO
+        bool "(EXPERIMENTAL) Link Time Optimization (LTO)"
+        default n
+        help
+            Enables LTO flag in linker
+            Note: Highly EXPERIMENTAL, furthermore make sure you're using a modern compiler GCC 9 or later
+
    config BOARD_FULL_OPTIMIZATION
        bool "Full optmization (O3)"
        default n
@@ -331,7 +331,7 @@ px4io_update: px4_io-v2_default cubepilot_io-v2_default
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

 .PHONY: coverity_scan
@@ -32,3 +32,4 @@
 ############################################################################

 add_subdirectory(init.d)
+add_subdirectory(mixers)
@@ -33,4 +33,5 @@

 px4_add_romfs_files(
 	rcS
+	rc.output_defaults
 )
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# UGV default parameters.
+#
+# NOTE: Script variables are declared/initialized/unset in the rcS script.
+#
+
+#
+# Enable servo output on pins 3 and 4 (steering and thrust)
+# but also include 1+2 as they form together one output group
+# and need to be set together.
+#
+set PWM_OUT 12
+
+#
+# PWM Hz - 50 Hz is the normal rate in RC cars, higher rates
+# may damage analog servos.
+#
+set PWM_MAIN_RATE 50
+
+#
+# This is the gimbal pass mixer.
+#
+set MIXER_AUX pass
+set PWM_AUX_OUT 12
+
+param set-default PWM_MAIN_DISARM 1500
+param set-default PWM_MAIN_MAX 2000
+param set-default PWM_MAIN_MIN 1000
+
+# Set mixer
+set MIXER IO_pass_ucan
@@ -65,8 +65,8 @@ unset BOARD_RC_DEFAULTS
 #
 # Start system state indicator.
 #
-rgbled start -X -q
-rgbled_ncp5623c start -X -q
+#rgbled start -X -q
+#rgbled_ncp5623c start -X -q

 #
 # board sensors: rc.sensors
@@ -86,10 +86,10 @@ unset BOARD_RC_SENSORS
 . ${R}etc/init.d/rc.serial

 # Check for flow sensor
-if param compare SENS_EN_PX4FLOW 1
-then
-	px4flow start -X &
-fi
+#if param compare SENS_EN_PX4FLOW 1
+#then
+#	px4flow start -X &
+#fi

-uavcannode start
+#uavcannode start
 unset R
@@ -0,0 +1,36 @@
+############################################################################
+#
+#   Copyright (c) 2018 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+px4_add_romfs_files(
+	IO_pass_ucan.main.mix
+)
@@ -0,0 +1,12 @@
+Passthrough mixer for PX4IO
+============================
+
+This file defines passthrough mixers suitable for testing.
+
+Channel group 0, channels 0-7 are passed directly through to the outputs.
+
+M: 1
+S: 0 0  10000  10000      0 -10000  10000
+
+M: 1
+S: 0 1  10000  10000      0 -10000  10000
@@ -25,6 +25,8 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3

+param set-default FW_SPOILERS_LND 0.4
+
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_CRUISE 0.25
@@ -7,6 +7,11 @@

 . ${R}etc/init.d/rc.vtol_defaults

+# TODO: Enable motor failure detection when the
+# VTOL no longer reports 0A for all ESCs in SITL
+param set-default FD_ACT_EN 0
+param set-default FD_ACT_MOT_TOUT 500
+
 # param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

@@ -9,7 +9,7 @@

 param set-default MAV_TYPE 21

-# param set-default SYS_CTRL_ALLOC 1
+param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

 param set-default CA_ROTOR_COUNT 4
@@ -27,9 +27,7 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05

 param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR1_TILT 2
 param set-default CA_ROTOR2_TILT 3
-param set-default CA_ROTOR3_TILT 4
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -1,6 +1,4 @@

-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
 mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
@@ -95,10 +95,9 @@ fi

 if param compare SYS_AUTOCONFIG 1
 then
+	# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+	param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	set AUTOCNF yes
-
-	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
-	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi

 # multi-instance setup
@@ -196,14 +195,6 @@ fi

 . "$autostart_file"

-#
-# If autoconfig parameter was set, reset it and save parameters.
-#
-if [ $AUTOCNF = yes ]
-then
-	param set SYS_AUTOCONFIG 0
-fi
-
 # Simulator IMU data provided at 250 Hz
 param set IMU_INTEG_RATE 250

@@ -55,4 +55,5 @@ px4_add_romfs_files(
 	rc.vehicle_setup
 	rc.vtol_apps
 	rc.vtol_defaults
+	rc.output_defaults
 )
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone QU4D
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 feed-through of RC AUX1 channel
-# @output MAIN6 feed-through of RC AUX2 channel
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 4
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.13
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.004
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.19
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.004
-param set-default MC_YAW_P 4
-
-set MIXER quad_w
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Steadidrone MAVRIK
-#
-# @type Octo Coax Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 motor 5
-# @output MAIN6 motor 6
-# @output MAIN7 motor 7
-# @output MAIN8 motor 8
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-
-param set-default MC_PITCH_P 4
-param set-default MC_PITCHRATE_P 0.24
-param set-default MC_PITCHRATE_I 0.09
-param set-default MC_PITCHRATE_D 0.013
-param set-default MC_PITCHRATE_MAX 180
-
-param set-default MC_ROLL_P 4
-param set-default MC_ROLLRATE_P 0.16
-param set-default MC_ROLLRATE_I 0.07
-param set-default MC_ROLLRATE_D 0.009
-param set-default MC_ROLLRATE_MAX 180
-
-param set-default MC_YAW_P 3
-
-param set-default MPC_HOLD_MAX_XY 0.25
-param set-default MPC_THR_MIN 0.15
-param set-default MPC_Z_VEL_MAX_DN 2
-
-param set-default BAT1_N_CELLS 4
-
-set MIXER octo_cox_w
-
-set PWM_OUT 12345678
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# @name CruiseAder Claire
-#
-# @type VTOL Tiltrotor
-# @class VTOL
-#
-# @maintainer Samay Siga <samay_s@icloud.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default MAV_TYPE 21
-
-param set-default PWM_AUX_DISARM 1000
-param set-default PWM_AUX_MAX 2000
-param set-default PWM_AUX_MIN 1000
-param set-default PWM_AUX_RATE 50
-
-param set-default PWM_MAIN_MAX 2000
-
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 13
-param set-default VT_IDLE_PWM_MC 1080
-param set-default VT_TILT_FW 0.9
-param set-default VT_TILT_MC 0.08
-param set-default VT_TILT_TRANS 0.5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 1
-
-set MIXER claire
-set MIXER_AUX claire
-
-set PWM_OUT 1234
@@ -69,4 +69,9 @@ param set-default VT_TYPE 1

 set MIXER vtol_convergence

-set PWM_OUT 1234
+if ! ver hwcmp MATEK_H743
+then
+	set PWM_OUT 1234
+else
+	set PWM_OUT 3456
+fi	
@@ -131,7 +131,6 @@ param set-default VT_F_TRANS_DUR 1
 param set-default VT_IDLE_PWM_MC 1025
 param set-default VT_B_REV_OUT 0.5
 param set-default VT_B_TRANS_THR 0.7
-param set-default VT_FW_PERM_STAB 1
 param set-default VT_TRANS_TIMEOUT 22
 param set-default VT_F_TRANS_RAMP 4

@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# @name Generic Output
+#
+# @maintainer
+#
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.output_defaults
+
+
+# Provide ESC a constant 1500 us pulse
+param set-default PWM_MAIN_DISARM 1500
+param set-default PWM_MAIN_MAX 2000
+param set-default PWM_MAIN_MIN 1000
+
+# Set mixer
+set MIXER IO_pass
+
+set PWM_OUT 12
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name IO Camflyer
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 15
-param set-default FW_AIRSPD_TRIM 13
-param set-default FW_R_TC 0.3
-param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.74
-param set-default FW_L1_PERIOD 16
-param set-default FW_LND_ANG 15
-param set-default FW_LND_FLALT 5
-param set-default FW_LND_HVIRT 13
-param set-default FW_LND_TLALT 5
-param set-default FW_THR_LND_MAX 0
-param set-default FW_PR_FF 0.35
-param set-default FW_RR_FF 0.6
-param set-default FW_RR_P 0.04
-
-param set-default PWM_MAIN_DISARM 1000
-
-
-set MIXER fw_generic_wing
-
-# Provide ESC a constant 1000 us pulse while disarmed
-set PWM_OUT 4
@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# @name FX-79 Buffalo Flying Wing
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 right aileron
-# @output MAIN2 left aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default FW_AIRSPD_MAX 30
-param set-default FW_AIRSPD_MIN 13
-
-param set-default NAV_LOITER_RAD 150
-
-set MIXER fw_generic_wing
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name Viper
-#
-# @type Flying Wing
-# @class Plane
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER Viper
@@ -1,53 +0,0 @@
-#!/bin/sh
-#
-# @name Modified Parrot Disco
-#
-# @url
-#
-# @type Flying Wing
-# @class Plane
-#
-# @output MAIN1 left aileron
-# @output MAIN2 right aileron
-# @output MAIN4 throttle
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-#
-# @maintainer Jan Liphardt <JTLiphardt@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-####################################
-# Airspeed
-####################################
-param set-default FW_AIRSPD_MAX  27 # = 52 knots
-
-####################################
-# Pitch
-####################################
-
-# Pitch rate feed forward (def = 0.5 %/rad/sec)
-param set-default FW_PR_FF 0.35
-
-####################################
-# Roll
-####################################
-
-# Basic limits (def = 50 deg)
-param set-default FW_R_LIM 40
-
-# Roll rate upper limit (def = 70 deg/s)
-param set-default FW_R_RMAX 50
-
-param set-default PWM_MAIN_DISARM 1000
-
-set MIXER fw_generic_wing.main.mix
-
-# Provide ESC a constant 1000 us pulse
-set PWM_OUT 4
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F330 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230
@@ -1,20 +0,0 @@
-#!/bin/sh
-#
-# @name DJI F450 w/ DJI ESCs
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_YAWRATE_P 0.3
-
-# DJI ESCs do not support calibration and need a higher min
-param set-default PWM_MAIN_MIN 1230
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name PX4 Vision Dev Kit v1
+# @name PX4 Vision DevKit Platform
 #
 # @type Quadrotor x
 # @class Copter
@@ -1,134 +0,0 @@
-#!/bin/sh
-#
-# @name PX4 Vision Dev Kit v1.5
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-# System parameters
-# use FMU motor outputs for less delay in the rate control loop
-param set-default SYS_USE_IO 0
-
-# Commander Parameters
-param set-default COM_OBS_AVOID 1
-param set-default COM_DISARM_LAND 0.5
-
-# EKF2 parameters
-param set-default EKF2_AID_MASK 35
-param set-default EKF2_IMU_POS_X 0.02
-param set-default EKF2_GPS_POS_X 0.055
-param set-default EKF2_GPS_POS_Z -0.15
-param set-default EKF2_MIN_RNG 0.03
-param set-default EKF2_OF_POS_X 0.055
-param set-default EKF2_OF_POS_Y 0.02
-param set-default EKF2_OF_POS_Z 0.065
-param set-default EKF2_REQ_HDRIFT 0.3
-param set-default EKF2_REQ_SACC 1
-param set-default EKF2_REQ_VDRIFT 0.3
-param set-default EKF2_RNG_A_HMAX 8
-param set-default EKF2_RNG_A_VMAX 2
-param set-default EKF2_RNG_POS_X 0.055
-param set-default EKF2_RNG_POS_Y -0.01
-param set-default EKF2_RNG_POS_Z 0.065
-param set-default EKF2_PCOEF_XP -0.25
-param set-default EKF2_PCOEF_YN -0.55
-param set-default EKF2_PCOEF_YP -0.55
-
-# MAVLink parameters
-param set-default MAV_0_CONFIG 101
-param set-default MAV_1_CONFIG 102
-param set-default MAV_1_RATE 80000
-param set-default MAV_1_MODE 9
-param set-default SER_TEL1_BAUD 921600
-
-# Vehicle attitude PID tuning
-param set-default MC_ACRO_EXPO 0
-param set-default MC_ACRO_EXPO_Y 0
-param set-default MC_ACRO_P_MAX 200
-param set-default MC_ACRO_R_MAX 200
-param set-default MC_ACRO_SUPEXPO 0
-param set-default MC_ACRO_SUPEXPOY 0
-param set-default MC_ACRO_Y_MAX 150
-param set-default MC_PITCHRATE_D 0.0015
-param set-default MC_ROLLRATE_D 0.0015
-param set-default MC_YAWRATE_P 0.3
-
-# Position Control Tuning
-param set-default CP_DIST 6
-param set-default MPC_ACC_DOWN_MAX 5
-param set-default MPC_ACC_HOR_MAX 10
-param set-default MPC_ACC_UP_MAX 4
-param set-default MPC_MANTHR_MIN 0
-param set-default MPC_MAN_Y_MAX 120
-param set-default MPC_TILTMAX_AIR 45
-param set-default MPC_THR_HOVER 0.3
-param set-default MPC_TKO_SPEED 1
-param set-default MPC_VEL_MANUAL 5
-param set-default MPC_XY_CRUISE 5
-param set-default MPC_XY_VEL_MAX 5
-param set-default MPC_XY_VEL_P_ACC 1.58
-param set-default MPC_XY_TRAJ_P 0.3
-param set-default MPC_Z_TRAJ_P 0.3
-param set-default MPC_Z_VEL_P_ACC 5
-param set-default MPC_Z_VEL_I_ACC 3
-param set-default MPC_LAND_ALT1 3
-param set-default MPC_LAND_ALT2 1
-param set-default MPC_POS_MODE 3
-param set-default CP_GO_NO_DATA 1
-
-# Navigator Parameters
-param set-default NAV_ACC_RAD 2
-
-# use oneshot motor output protocol
-param set-default PWM_MAIN_RATE 0
-
-# RTL Parameters
-param set-default RTL_DESCEND_ALT 5
-param set-default RTL_RETURN_ALT 5
-
-# Logging Parameters
-param set-default SDLOG_PROFILE 131
-
-# Sensors Parameters
-param set-default SENS_CM8JL65_CFG 202
-param set-default SENS_FLOW_MAXHGT 25
-param set-default SENS_FLOW_MINHGT 0.5
-param set-default IMU_GYRO_CUTOFF 100
-param set-default SENS_TFLOW_CFG 103
-
-# Power Parameters
-param set-default BAT1_N_CELLS 4
-param set-default BAT1_A_PER_V 36.364
-param set-default BAT1_V_DIV 18.182
-
-# Circuit breakers
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default THR_MDL_FAC 0.3
-
-param set-default CA_ROTOR_COUNT 4
-param set-default CA_ROTOR0_PX 0.15
-param set-default CA_ROTOR0_PY 0.15
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR1_PX -0.15
-param set-default CA_ROTOR1_PY -0.15
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR2_PX 0.15
-param set-default CA_ROTOR2_PY -0.15
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.15
-param set-default CA_ROTOR3_PY 0.15
-param set-default CA_ROTOR3_KM -0.05
-
-# Outputs
-param set-default PWM_AUX_FUNC1 101
-param set-default PWM_AUX_FUNC2 102
-param set-default PWM_AUX_FUNC3 103
-param set-default PWM_AUX_FUNC4 104
-
@@ -1,27 +0,0 @@
-#!/bin/sh
-#
-# @name DJI Matrice 100
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer James Goppert <james.goppert@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 6
-
-param set-default MC_ROLLRATE_P 0.05
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.001
-param set-default MC_PITCHRATE_P 0.05
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.001
-
-param set-default MC_YAWRATE_I 0
-
-param set-default PWM_MAIN_MIN 1200
@@ -52,28 +52,21 @@ px4_add_romfs_files(

 	# [3000, 3999] Flying wing"
 	3000_generic_wing
-	3030_io_camflyer
 	3031_phantom
 	3032_skywalker_x5
 	3033_wingwing
-	3034_fx79
-	3035_viper
 	3036_pigeon
-	3037_parrot_disco_mod
 	3100_tbs_caipirinha

 	# [4000, 4999] Quadrotor x"
 	4001_quad_x
 	4003_qavr5
 	4009_qav250
-	4010_dji_f330
-	4011_dji_f450
 	4014_s500
 	4015_holybro_s500
 	4016_holybro_px4vision
 	4017_nxp_hovergames
 	4019_x500_v2
-	4020_holybro_px4vision_v1_5
 	4030_3dr_solo
 	4031_3dr_quad
 	4040_reaper
@@ -82,7 +75,6 @@ px4_add_romfs_files(
 	4051_s250aq
 	4052_holybro_qav250
 	4053_holybro_kopis2
-	4060_dji_matrice_100
 	4061_atl_mantis_edu
 	4071_ifo
 	4072_draco
@@ -113,7 +105,6 @@ px4_add_romfs_files(
 	# [10000, 10999] Quadrotor Wide arm / H frame"
 	10015_tbs_discovery
 	10016_3dr_iris
-	10017_steadidrone_qu4d
 	10018_tbs_endurance

 	# [11000, 11999] Hexa Cox
@@ -121,7 +112,6 @@ px4_add_romfs_files(

 	# [12000, 12999] Octo Cox
 	12001_octo_cox
-	12002_steadidrone_mavrik

 	# [13000, 13999] VTOL
 	13000_generic_vtol_standard
@@ -134,7 +124,6 @@ px4_add_romfs_files(
 	13007_vtol_AAVVT_quad
 	13008_QuadRanger
 	13009_vtol_spt_ranger
-	13010_claire
 	13012_convergence
 	13013_deltaquad
 	13014_vtol_babyshark
@@ -158,7 +147,7 @@ px4_add_romfs_files(
 	18001_TF-B1

 	# [22000, 22999] Reserve for custom models
-
+	22222_generic_output
 	24001_dodeca_cox

 	50000_generic_ground_vehicle
@@ -17,21 +17,17 @@ set OUTPUT_DEV none
 set OUTPUT_AUX_DEV /dev/pwm_output1
 set OUTPUT_EXTRA_DEV /dev/pwm_output0

-# set ESC mask before starting the modules
-# setting the numeric parameter to "none" would make the startup script fail
+# set these before starting the modules
 if [ $PWM_AUX_OUT != none ]
 then
+
 	param set PWM_AUX_OUT ${PWM_AUX_OUT}
-else
-	param set PWM_AUX_OUT 0
 fi


 if [ $PWM_OUT != none ]
 then
 	param set PWM_MAIN_OUT ${PWM_OUT}
-else
-	param set PWM_AUX_OUT 0
 fi

 #
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# UGV default parameters.
+#
+# NOTE: Script variables are declared/initialized/unset in the rcS script.
+#
+
+#
+# Enable servo output on pins 3 and 4 (steering and thrust)
+# but also include 1+2 as they form together one output group
+# and need to be set together.
+#
+set PWM_OUT 12
+
+#
+# PWM Hz - 50 Hz is the normal rate in RC cars, higher rates
+# may damage analog servos.
+#
+set PWM_MAIN_RATE 50
+
+#
+# This is the gimbal pass mixer.
+#
+set MIXER_AUX pass
+set PWM_AUX_OUT 12
@@ -21,7 +21,6 @@ set +e
 # it wastes flash
 #
 set R /
-set AUTOCNF no
 set FCONFIG /fs/microsd/etc/config.txt
 set FEXTRAS /fs/microsd/etc/extras.txt
 set FRC /fs/microsd/etc/rc.txt
@@ -171,19 +170,18 @@ else
 		param select-backup /fs/microsd/parameters_backup.bson
 	fi

-	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X ARK_FMU_V6X
+	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X
 	then
 		netman update -i eth0
 	fi

 	#
-	# Set AUTOCNF flag to use it in AUTOSTART scripts.
+	# If the airframe has been previously reset SYS_AUTCONFIG will have been set to 1 and other params will be reset on the next boot.
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
-		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
-		set AUTOCNF yes
+		# Reset params except Airframe, RC calibration, sensor calibration, flight modes, total flight time, and next flight UUID.
+		param reset_all SYS_AUTOSTART RC* CAL_* COM_FLTMODE* LND_FLIGHT* TC_* COM_FLIGHT*
 	fi

 	#
@@ -275,11 +273,25 @@ else
 	fi

 	#
-	# If autoconfig parameter was set, reset it and save parameters.
+	# Check if UAVCAN is enabled, default to it for ESCs.
 	#
-	if [ $AUTOCNF = yes ]
+	if param greater -s UAVCAN_ENABLE 0
 	then
-		param set SYS_AUTOCONFIG 0
+		# Start core UAVCAN module.
+		if uavcan start
+		then
+			if param greater UAVCAN_ENABLE 2
+			then
+				set OUTPUT_MODE uavcan_esc
+			fi
+		else
+			tune_control play error
+		fi
+	else
+		if param greater -s CYPHAL_ENABLE 0
+		then
+			cyphal start
+		fi
 	fi

 	#
@@ -534,28 +546,6 @@ else
 	fi
 	unset BOARD_BOOTLOADER_UPGRADE

-	#
-	# Check if UAVCAN is enabled, default to it for ESCs.
-	#
-	if param greater -s UAVCAN_ENABLE 0
-	then
-		# Start core UAVCAN module.
-		if uavcan start
-		then
-			if param greater UAVCAN_ENABLE 2
-			then
-				set OUTPUT_MODE uavcan_esc
-			fi
-		else
-			tune_control play error
-		fi
-	else
-		if param greater -s UAVCAN_V1_ENABLE 0
-		then
-			uavcan_v1 start
-		fi
-	fi
-
 #
 # End of autostart.
 #
@@ -565,7 +555,6 @@ fi
 # Unset all script parameters to free RAM.
 #
 unset R
-unset AUTOCNF
 unset FCONFIG
 unset FEXTRAS
 unset FRC
@@ -21,14 +21,16 @@ O:      10000  10000      0 -10000  10000
 S: 0 3      0  20000 -10000 -10000  10000

 # mixer for the left aileron
-M: 1
+M: 2
 O:      10000  10000   0 -10000  10000
 S: 0 0  -10000  -10000    0 -10000  10000
+S: 0 5   10000   10000    0 -10000  10000

 # mixer for the right aileron
-M: 1
+M: 2
 O:      10000  10000   0 -10000  10000
 S: 0 0  10000  10000    0 -10000  10000
+S: 0 5  10000  10000    0 -10000  10000

 # mixer for the elevator
 M: 1
@@ -8,22 +8,22 @@ R: 4x
 # tilt servo motor 1
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000

 # tilt servo motor 2
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000

 # tilt servo motor 3
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000

 # tilt servo motor 4
 M: 1
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000

 # mixer for the left aileron
 M: 1
@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).

-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -20,11 +20,11 @@ endpoints to suit.

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000

 Elevator mixer
 ------------
@@ -11,7 +11,7 @@ to output 4, the wheel to output 5 and the flaps to output 6 and 7.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,11 +21,11 @@ endpoints to suit.

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000

 M: 2
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -9,20 +9,20 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw), 3 (thrust) 4 (flaps), 5 (spoiler).

-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------

 This mixer assumes that the aileron servos are set up mechanically reversed.

 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000

 M: 2
 S: 0 0 -10000 -10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -40,8 +40,6 @@ px4_add_romfs_files(
 	babyshark.main.mix
 	blade130.main.mix
 	CCPM.main.mix
-	claire.aux.mix
-	claire.main.mix
 	cloudship.main.mix
 	coax.main.mix
 	delta.main.mix
@@ -83,7 +81,6 @@ px4_add_romfs_files(
 	tri_y_yaw-.main.mix
 	uuv_x.main.mix
 	vectored6dof.main.mix
-	Viper.main.mix
 	vtol_AAERT.aux.mix
 	vtol_AAVVT.aux.mix
 	vtol_TTTTAAER.aux.mix
@@ -1,66 +0,0 @@
-Viper Delta-wing mixer
-=================================
-# @board px4_fmu-v2 exclude
-
-Designed for Viper.
-
-TODO (sjwilks): Add mixers for flaps.
-
-This file defines mixers suitable for controlling a delta wing aircraft using
-PX4FMU. The configuration assumes the elevon servos are connected to PX4FMU
-servo outputs 0 and 1 and the motor speed control to output 3. Output 2 is
-assumed to be unused.
-
-Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch) and 3 (thrust).
-
-See the README for more information on the scaler format.
-
-Elevon mixers
-------------
-Three scalers total (output, roll, pitch).
-
-On the assumption that the two elevon servos are physically reversed, the pitch
-input is inverted between the two servos.
-
-The scaling factor for roll inputs is adjusted to implement differential travel
-for the elevons.
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1   8000   8000      0 -10000  10000
-
-M: 2
-S: 0 0   7500   7500      0 -10000  10000
-S: 0 1  -8000  -8000      0 -10000  10000
-
-Output 2
--------
-This mixer is empty.
-
-Z:
-
-Motor speed mixer
-----------------
-Two scalers total (output, thrust).
-
-This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1)
-range.  Inputs below zero are treated as zero.
-
-M: 1
-S: 0 3      0  20000 -10000 -10000  10000
-
-Inputs to the mixer come from channel group 2 (payload), channels 0
-(bay servo 1), 1 (bay servo 2) and 3 (drop release).
-----------------------------------------------------
-
-M: 1
-S: 2 0  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 1  10000  10000      0 -10000  10000
-
-M: 1
-S: 2 2  -8000  -8000      0 -10000  10000
-
-
@@ -1,28 +0,0 @@
-# mixer for the CruiseAder Claire tilt mechansim servo and elevons
-
-=======================================================================
-
-
-Tilt mechanism servo mixer
-
---------------------------
-
-M: 1
-
-
-S: 1 4  10000  10000      0 -10000  10000
-
-
-
-Elevon mixers
-
-------------
-
-M: 2
-
-S: 1 0   7500   7500      0 -10000  10000
-S: 1 1   7500   7500      0 -10000  10000
-
-M: 2
-S: 1 0    7500    7500    0 -10000  10000
-S: 1 1   -7500   -7500    0 -10000  10000
@@ -1,8 +0,0 @@
-# CruiseAder Claire Main Multirotor mixer for PX4FMU
-# @board px4_fmu-v2 exclude
-
-#
-
-#===========================
-
-R: 4x
@@ -6,7 +6,7 @@
 Tilt mechanism servo mixer
 ---------------------------
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000

 Elevon mixers
 -------------
@@ -5,14 +5,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU

 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU 
+The configuration assumes the aileron servos are connected to PX4FMU
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).

-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,11 +22,11 @@ endpoints to suit.

 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 6  10000  10000      0 -10000  10000
+S: 1 5  10000  10000      0 -10000  10000

 M: 2
 S: 1 0 -10000 -10000      0 -10000  10000
-S: 1 6 -10000 -10000      0 -10000  10000
+S: 1 5 -10000 -10000      0 -10000  10000


 V-tail mixers
@@ -6,19 +6,19 @@
 ---------------------------
 # front left up:2000 down:1000
 M: 1
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000

 # front right up:1000 down:2000
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000

 # rear left up:2000 down:1000
 M: 1
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000

 # rear right up:1000 down:2000
 M: 1
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000


 # Aileron mixer
@@ -10,12 +10,12 @@ Tilt mechanism servo mixer
 ---------------------------
 #RIGHT up:2000 down:1000
 M: 2
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 Elevon mixers
@@ -10,7 +10,7 @@ to output 4 and the wheel to output 5.
 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
 (roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps).

-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000

 Elevator mixer
 ------------
@@ -9,9 +9,9 @@ output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4, the wheel to output 5 and the flaps to output 6 and 7.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).

-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -22,12 +22,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6  10000  10000      0 -10000  10000
+S: 0 5  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 0 0  10000  10000      0 -10000  10000
-S: 0 6 -10000 -10000      0 -10000  10000
+S: 0 5 -10000 -10000      0 -10000  10000

 V-tail mixers
 -------------
@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0 -20000   9000 -10000  10000
+S: 1 8      0 -20000   9000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000  -10000 -10000  10000
+S: 1 8      0  20000  -10000 -10000  10000
 S: 0 2   4000   4000      0 -10000  10000

 Elevon mixers
@@ -3,14 +3,14 @@ Aileron/v-tail/throttle VTOL mixer for PX4FMU

 This file defines mixers suitable for controlling a fixed wing aircraft with
 aileron, v-tail (rudder, elevator) and throttle using PX4FMU.
-The configuration assumes the aileron servos are connected to PX4FMU 
+The configuration assumes the aileron servos are connected to PX4FMU
 AUX servo output 0 and 1, the tail servos to output 2 and 3, the throttle
 to output 4.

 Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0
-(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 6 (flaperon).
+(roll), 1 (pitch), 2 (yaw) and 3 (thrust) 4 (flaps) 5 (spoiler).

-Aileron mixer (roll + flaperon)
+Aileron mixer (roll + spoiler)
 ---------------------------------

 This mixer assumes that the aileron servos are set up correctly mechanically;
@@ -21,12 +21,12 @@ endpoints to suit.
 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 6  10000  10000      0 -10000  10000
+S: 1 5  10000  10000      0 -10000  10000

 M: 2
 O:      10000  10000      0 -10000  10000
 S: 1 0  10000  10000      0 -10000  10000
-S: 1 6 -10000 -10000      0 -10000  10000
+S: 1 5 -10000 -10000      0 -10000  10000


 V-tail mixers
@@ -10,13 +10,13 @@ Tilt mechanism servo mixer
 #RIGHT up:2000 down:1000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0 -20000  10000 -10000  10000
+S: 1 8      0 -20000  10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 #LEFT up:1000 down:2000
 M: 2
 O:      10000  10000      0 -10000  10000
-S: 1 4      0  20000 -10000 -10000  10000
+S: 1 8      0  20000 -10000 -10000  10000
 S: 0 2   8000   8000      0 -10000  10000

 Elevon mixers
@@ -13,8 +13,7 @@ exec find boards msg src platforms test \
    -path platforms/qurt/dspal -prune -o \
    -path src/drivers/uavcan/libuavcan -prune -o \
    -path src/drivers/uavcan/uavcan_drivers/kinetis/driver/include/uavcan_kinetis -prune -o \
-    -path src/drivers/uavcan_v1/libcanard -prune -o \
-    -path src/drivers/uavcannode_gps_demo/libcanard -prune -o \
+    -path src/drivers/cyphal/libcanard -prune -o \
    -path src/lib/crypto/monocypher -prune -o \
    -path src/lib/events/libevents -prune -o \
    -path src/lib/parameters/uthash -prune -o \
@@ -0,0 +1,7 @@
+if SWD
+speed 1000
+r
+loadbin /Users/landon/git/px4/build/nxp_ucans32k146_nxp_demo/deploy/34.bin,0x6000
+r
+g
+q
@@ -0,0 +1,3 @@
+#!/bin/zsh
+
+JLinkExe -device S32K146 -CommandFile /Users/landon/git/px4/Tools/flash_nxp/flash_ucan.jlink
@@ -200,13 +200,12 @@ if [[ $INSTALL_SIM == "true" ]]; then

 	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 		java_version=11
-		gazebo_version=9
 	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 		java_version=13
-		gazebo_version=11
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		java_version=11
 	else
 		java_version=14
-		gazebo_version=11
 	fi
 	# Java (jmavsim or fastrtps)
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
@@ -220,20 +219,30 @@ if [[ $INSTALL_SIM == "true" ]]; then
 	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")

 	# Gazebo
+	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+		gazebo_version=9
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+		gazebo_packages="gazebo libgazebo-dev"
+	else
+		# default and Ubuntu 20.04
+		gazebo_version=11
+		gazebo_packages="gazebo$gazebo_version libgazebo$gazebo_version-dev"
+	fi
+
 	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
 	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
 	# Update list, since new gazebo-stable.list has been added
 	sudo apt-get update -y --quiet
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		dmidecode \
-		gazebo$gazebo_version \
+		$gazebo_packages \
 		gstreamer1.0-plugins-bad \
 		gstreamer1.0-plugins-base \
 		gstreamer1.0-plugins-good \
 		gstreamer1.0-plugins-ugly \
 		gstreamer1.0-libav \
 		libeigen3-dev \
-		libgazebo$gazebo_version-dev \
 		libgstreamer-plugins-base1.0-dev \
 		libimage-exiftool-perl \
 		libopencv-dev \
@@ -130,7 +130,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -173,7 +174,7 @@ CONFIG_STM32_SPI1=y
 CONFIG_STM32_SPI2=y
 CONFIG_STM32_SPI4=y
 CONFIG_STM32_SPI4_DMA=y
-CONFIG_STM32_SPI4_DMA_BUFFER=512
+CONFIG_STM32_SPI4_DMA_BUFFER=1024
 CONFIG_STM32_SPI_DMA=y
 CONFIG_STM32_SPI_DMATHRESHOLD=8
 CONFIG_STM32_TIM10=y
@@ -105,7 +105,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,7 +107,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,7 +107,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -107,7 +107,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -1,26 +0,0 @@
-#!/bin/sh
-#
-# board specific defaults
-#------------------------------------------------------------------------------
-
-# Mavlink ethernet (CFG 1000)
-param set-default MAV_2_CONFIG 1000
-param set-default MAV_2_BROADCAST 1
-param set-default MAV_2_MODE 0
-param set-default MAV_2_RADIO_CTL 0
-param set-default MAV_2_RATE 100000
-param set-default MAV_2_REMOTE_PRT 14550
-param set-default MAV_2_UDP_PRT 14550
-
-param set-default SENS_EN_INA238 0
-param set-default SENS_EN_INA228 0
-param set-default SENS_EN_INA226 1
-
-if ver hwtypecmp ARKV6X001000 ARKV6X001001 ARKV6X001002 ARKV6X001003 ARKV6X001004 ARKV6X001005 ARKV6X001006 ARKV6X001007
-then
-	param set-default SYS_USE_IO 0
-else
-	param set-default SYS_USE_IO 1
-fi
-
-safety_button start
@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# PX4 FMUv6X specific board sensors init
-#------------------------------------------------------------------------------
-board_adc start
-
-if param compare SENS_EN_INA226 1
-then
-	# Start Digital power monitors
-	ina226 -X -b 1 -t 1 -k start
-	ina226 -X -b 2 -t 2 -k start
-fi
-
-if param compare SENS_EN_INA228 1
-then
-	# Start Digital power monitors
-	ina228 -X -b 1 -t 1 -k start
-	ina228 -X -b 2 -t 2 -k start
-fi
-
-if param compare SENS_EN_INA238 1
-then
-	# Start Digital power monitors
-	ina238 -X -b 1 -t 1 -k start
-	ina238 -X -b 2 -t 2 -k start
-fi
-
-# Internal SPI bus IIM42652
-iim42652 -R 3 -s -b 1 start
-
-# Internal SPI bus ICM42688p
-icm42688p -R 9 -s -b 2 start
-
-# Internal SPI bus ICM42688p
-icm42688p -R 6 -s -b 3 start
-
-# Internal magnetometer on I2c
-bmm150 -I start
-
-# External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
-ist8310 -X -b 1 -R 10 start
-
-# Possible internal Baro
-bmp388 -I start
-
-# Baro on I2C3
-ms5611 -X start
@@ -1,87 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#pragma once
-
-// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
-//                                                     V
-
-#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     /* 1 DMA1:37 ICM-20649 */
-#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     /* 2 DMA1:38 ICM-20649 */
-
-#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0     /* 3 DMA1:39 ICM-42688-P */
-#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0     /* 4 DMA1:40 ICM-42688-P */
-
-//#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
-//#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
-
-//#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_0 /*  DMA1:43 Telem3 */
-//#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0 /*  DMA1:44 Telem3 */
-
-//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
-//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
-
-//#define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 EXT2 */
-//#define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 EXT2 */
-
-#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   /* 5 DMA1:71 PX4IO */
-#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   /* 6 DMA1:72 PX4IO */
-
-// Assigned in timer_config.cpp
-
-// Timer 4                                          /* 7 DMA1:32 TIM4UP */
-// Timer 5                                          /* 8 DMA1:50 TIM5UP */
-
-// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
-//                                                     V
-
-#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 DMA2:61 BMI088 */
-#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 DMA2:62 BMI088 */
-
-#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
-#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
-
-#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
-#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66  TELEM2 */
-
-#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79  TELEM1 */
-#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80  TELEM1 */
-
-//#define DMAMAP_UART8_RX   DMAMAP_DMA12_UART8RX_1  /*  DMA1:81  GPS2 */
-//#define DMAMAP_UART8_TX   DMAMAP_DMA12_UART8TX_1  /*  DMA1:82  GPS2 */
-
-// DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
-//                                                     V
-
-#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
-#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */
@@ -1,524 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2016, 2020 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file board_config.h
- *
- * PX4FMU-v6x internal definitions
- */
-
-#pragma once
-
-/****************************************************************************************************
- * Included Files
- ****************************************************************************************************/
-
-#include <px4_platform_common/px4_config.h>
-#include <nuttx/compiler.h>
-#include <stdint.h>
-
-
-#include <stm32_gpio.h>
-
-/****************************************************************************************************
- * Definitions
- ****************************************************************************************************/
-
-#undef TRACE_PINS
-
-/* PX4IO connection configuration */
-
-#define BOARD_USES_PX4IO_VERSION       2
-#define PX4IO_SERIAL_DEVICE            "/dev/ttyS5"
-#define PX4IO_SERIAL_TX_GPIO           GPIO_USART6_TX
-#define PX4IO_SERIAL_RX_GPIO           GPIO_USART6_RX
-#define PX4IO_SERIAL_BASE              STM32_USART6_BASE
-#define PX4IO_SERIAL_VECTOR            STM32_IRQ_USART6
-#define PX4IO_SERIAL_TX_DMAMAP         DMAMAP_USART6_TX
-#define PX4IO_SERIAL_RX_DMAMAP         DMAMAP_USART6_RX
-#define PX4IO_SERIAL_RCC_REG           STM32_RCC_APB2ENR
-#define PX4IO_SERIAL_RCC_EN            RCC_APB2ENR_USART6EN
-#define PX4IO_SERIAL_CLOCK             STM32_PCLK2_FREQUENCY
-#define PX4IO_SERIAL_BITRATE           1500000               /* 1.5Mbps -> max rate for IO */
-
-/* Configuration ************************************************************************************/
-
-#define BOARD_HAS_LTC44XX_VALIDS      2 //  N Bricks
-#define BOARD_HAS_USB_VALID           1 // LTC Has USB valid
-#define BOARD_HAS_NBAT_V              2d // 2 Digital Voltage
-#define BOARD_HAS_NBAT_I              2d // 2 Digital Current
-
-/* PX4FMU GPIOs ***********************************************************************************/
-
-/* Trace Clock and D0-D3 are available on the trace connector
- *
- * TRACECLK PE2  - Dedicated       - Trace Connector Pin 1
- * TRACED0  PE3  - nLED_RED        - Trace Connector Pin 3
- * TRACED1  PE4  - nLED_GREEN      - Trace Connector Pin 5
- * TRACED2  PE5  - nLED_BLUE       - Trace Connector Pin 7
- * TRACED3  PE6  - nARMED          - Trace Connector Pin 8
-
- */
-
-/* LEDs are driven with push open drain to support Anode to 5V or 3.3V or used as TRACE0-2 */
-
-#if !defined(TRACE_PINS)
-#  define GPIO_nLED_RED        /* PE3 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
-#  define GPIO_nLED_GREEN      /* PE4 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
-#  define GPIO_nLED_BLUE       /* PE5 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
-
-#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
-#  define BOARD_OVERLOAD_LED     LED_RED
-#  define BOARD_ARMED_STATE_LED  LED_BLUE
-
-#else
-
-#  define GPIO_TRACECLK1 (GPIO_TRACECLK |GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN2)
-#  define GPIO_TRACED0   (GPIO_TRACED0_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN3)
-#  define GPIO_TRACED1   (GPIO_TRACED1_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN4)
-#  define GPIO_TRACED2   (GPIO_TRACED2_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN5)
-#  define GPIO_TRACED3   (GPIO_TRACED3_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN6)
-//#define GPIO_TRACESWO                        //(GPIO_ALT|GPIO_AF0|GPIO_PORTB|GPIO_PIN3)
-
-#  undef  BOARD_HAS_CONTROL_STATUS_LEDS
-#  undef  BOARD_OVERLOAD_LED
-#  undef  BOARD_ARMED_STATE_LED
-
-#  define GPIO_nLED_RED    GPIO_TRACED0
-#  define GPIO_nLED_GREEN  GPIO_TRACED1
-#  define GPIO_nLED_BLUE   GPIO_TRACED2
-#  define GPIO_nARMED      GPIO_TRACED3
-#  define GPIO_nARMED_INIT GPIO_TRACED3
-#endif
-
-
-/* SPI */
-
-#define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
-#define GPIO_SYNC                   /* PE9  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_100MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
-
-/* I2C busses */
-
-/* Devices on the onboard buses.
- *
- * Note that these are unshifted addresses.
- */
-#define GPIO_I2C2_DRDY1_BMP388      /* PG5  */  (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTG|GPIO_PIN5)
-
-/*
- * ADC channels
- *
- * These are the channel numbers of the ADCs of the microcontroller that
- * can be used by the Px4 Firmware in the adc driver
- */
-
-/* ADC defines to be used in sensors.cpp to read from a particular channel */
-
-#define ADC1_CH(n)                  (n)
-
-/* N.B. there is no offset mapping needed for ADC3 because */
-#define ADC3_CH(n)                  (n)
-
-/* We are only use ADC3 for REV/VER.
- * ADC3_6V6 and ADC3_3V3 are mapped back to ADC1
- * To do this We are relying on PC2_C, PC3_C being connected to PC2, PC3
- * respectively by the SYSCFG_PMCR default of setting for PC3SO PC2SO PA1SO
- * PA0SO of 0.
- *
- *  0 Analog switch closed (pads are connected through the analog switch)
- *
- * So ADC3_INP0 is GPIO_ADC123_INP12
- *    ADC3_INP1 is GPIO_ADC12_INP13
- */
-
-/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
-
-#define PX4_ADC_GPIO  \
-	/* PA0  */  GPIO_ADC1_INP16,   \
-	/* PA4  */  GPIO_ADC12_INP18,  \
-	/* PB0  */  GPIO_ADC12_INP9,   \
-	/* PB1  */  GPIO_ADC12_INP5,   \
-	/* PC2  */  GPIO_ADC123_INP12, \
-	/* PC3  */  GPIO_ADC12_INP13,  \
-	/* PF12 */  GPIO_ADC1_INP6,    \
-	/* PH3  */  GPIO_ADC3_INP14,   \
-	/* PH4  */  GPIO_ADC3_INP15
-
-/* Define Channel numbers must match above GPIO pin IN(n)*/
-#define ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL     /* PA0  */  ADC1_CH(16)
-#define ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL     /* PA4  */  ADC1_CH(18)
-#define ADC_SCALED_VDD_3V3_SENSORS3_CHANNEL     /* PB0  */  ADC1_CH(9)
-#define ADC_SCALED_V5_CHANNEL                   /* PB1  */  ADC1_CH(5)
-#define ADC_ADC3_6V6_CHANNEL                    /* PC2  */  ADC3_CH(12)
-#define ADC_ADC3_3V3_CHANNEL                    /* PC3  */  ADC3_CH(13)
-#define ADC_SCALED_VDD_3V3_SENSORS4_CHANNEL     /* PF12 */  ADC1_CH(6)
-#define ADC_HW_VER_SENSE_CHANNEL                /* PH3  */  ADC3_CH(14)
-#define ADC_HW_REV_SENSE_CHANNEL                /* PH4  */  ADC3_CH(15)
-
-#define ADC_CHANNELS \
-	((1 << ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL) | \
-	 (1 << ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL) | \
-	 (1 << ADC_SCALED_VDD_3V3_SENSORS3_CHANNEL) | \
-	 (1 << ADC_SCALED_V5_CHANNEL)               | \
-	 (1 << ADC_ADC3_6V6_CHANNEL)                | \
-	 (1 << ADC_ADC3_3V3_CHANNEL))               | \
-	(1 << ADC_SCALED_VDD_3V3_SENSORS4_CHANNEL)
-
-/* HW has to large of R termination on ADC todo:change when HW value is chosen */
-
-#define HW_REV_VER_ADC_BASE STM32_ADC3_BASE
-
-#define SYSTEM_ADC_BASE STM32_ADC1_BASE
-
-/* HW has to large of R termination on ADC todo:change when HW value is chosen */
-#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
-
-/* HW Version and Revision drive signals Default to 1 to detect */
-#define BOARD_HAS_HW_VERSIONING
-
-#define GPIO_HW_VER_REV_DRIVE  /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
-#define GPIO_HW_REV_SENSE      /* PH4 */  GPIO_ADC3_INP15
-#define GPIO_HW_VER_SENSE      /* PH3 */  GPIO_ADC3_INP14
-#define HW_INFO_INIT           {'V','6','X','x', 'x',0}
-#define HW_INFO_INIT_VER       3 /* Offset in above string of the VER */
-#define HW_INFO_INIT_REV       4 /* Offset in above string of the REV */
-
-#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0 and Rev 3 Sensor sets
-//                 Base/FMUM
-#define V6X00   HW_VER_REV(0x0,0x0) // FMUV6X,                 Rev 0
-#define V6X01   HW_VER_REV(0x0,0x1) // FMUV6X,     BMI388 I2C2 Rev 1
-#define V6X03   HW_VER_REV(0x0,0x3) // FMUV6X,     Sensor Set  Rev 3
-#define V6X04   HW_VER_REV(0x0,0x4) // FMUV6X,     Sensor Set  Rev 4
-#define V6X10   HW_VER_REV(0x1,0x0) // NO PX4IO,               Rev 0
-#define V6X13   HW_VER_REV(0x1,0x3) // NO PX4IO,   Sensor Set  Rev 3
-#define V6X14   HW_VER_REV(0x1,0x4) // NO PX4IO,   Sensor Set  Rev 4
-#define V6X40   HW_VER_REV(0x4,0x0) // FMUV6X,                    HB CM4 base Rev 0
-#define V6X41   HW_VER_REV(0x4,0x1) // FMUV6X,     BMI388 I2C2    HB CM4 base Rev 1
-#define V6X43   HW_VER_REV(0x4,0x3) // FMUV6X,     Sensor Set     HB CM4 base Rev 3
-#define V6X44   HW_VER_REV(0x4,0x4) // FMUV6X,     Sensor Set     HB CM4 base Rev 4
-#define V6X50   HW_VER_REV(0x5,0x0) // FMUV6X,                    HB Mini Rev 0
-#define V6X51   HW_VER_REV(0x5,0x1) // FMUV6X,     BMI388 I2C2    HB Mini Rev 1
-#define V6X53   HW_VER_REV(0x5,0x3) // FMUV6X,     Sensor Set     HB Mini Rev 3
-#define V6X54   HW_VER_REV(0x5,0x4) // FMUV6X,     Sensor Set     HB Mini Rev 4
-
-
-/* HEATER
- * PWM in future
- */
-#define GPIO_HEATER_OUTPUT   /* PB10  T2CH3 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
-#define HEATER_OUTPUT_EN(on_true)	       px4_arch_gpiowrite(GPIO_HEATER_OUTPUT, (on_true))
-
-/* PE6 is nARMED
- *  The GPIO will be set as input while not armed HW will have external HW Pull UP.
- *  While armed it shall be configured at a GPIO OUT set LOW
- */
-#if !defined(TRACE_PINS)
-#define GPIO_nARMED_INIT     /* PE6 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN6)
-#define GPIO_nARMED          /* PE6 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN6)
-#define BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE(enabled)  px4_arch_configgpio((enabled) ? GPIO_nARMED : GPIO_nARMED_INIT)
-#define BOARD_GET_EXTERNAL_LOCKOUT_STATE() px4_arch_gpioread(GPIO_nARMED)
-#endif
-
-
-/* PWM
- */
-#define DIRECT_PWM_OUTPUT_CHANNELS   9
-
-
-/* Power supply control and monitoring GPIOs */
-
-#define GPIO_nPOWER_IN_A                /* PG1  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN1)
-#define GPIO_nPOWER_IN_B                /* PG2  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN2)
-#define GPIO_nPOWER_IN_C                /* PG3  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN3)
-
-#define GPIO_nVDD_BRICK1_VALID          GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
-#define GPIO_nVDD_BRICK2_VALID          GPIO_nPOWER_IN_B /* Brick 2 Is Chosen  */
-#define BOARD_NUMBER_BRICKS             2
-#define BOARD_NUMBER_DIGITAL_BRICKS     2
-#define GPIO_nVDD_USB_VALID             GPIO_nPOWER_IN_C /* USB     Is Chosen */
-
-#define GPIO_VDD_5V_PERIPH_nEN          /* PG4  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN4)
-#define GPIO_VDD_5V_PERIPH_nOC          /* PE15 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTE|GPIO_PIN15)
-#define GPIO_VDD_5V_HIPOWER_nEN         /* PG10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN10)
-#define GPIO_VDD_5V_HIPOWER_nOC         /* PF13 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTF|GPIO_PIN13)
-#define GPIO_VDD_3V3_SENSORS4_EN        /* PG8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN8)
-#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN  /* PH2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN2)
-#define GPIO_VDD_3V3_SD_CARD_EN         /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
-
-/* Spare GPIO */
-
-#define GPIO_PG6                        /* PG6  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN6)
-#define GPIO_PD15                       /* PD15 */  (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTD|GPIO_PIN15)
-
-/* ETHERNET GPIO */
-
-#define GPIO_ETH_POWER_EN              /* PG15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN15)
-
-/* NFC GPIO */
-
-#define GPIO_NFC_GPIO                   /* PC0 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN0)
-
-
-/* Define True logic Power Control in arch agnostic form */
-
-#define VDD_5V_PERIPH_EN(on_true)          px4_arch_gpiowrite(GPIO_VDD_5V_PERIPH_nEN, !(on_true))
-#define VDD_5V_HIPOWER_EN(on_true)         px4_arch_gpiowrite(GPIO_VDD_5V_HIPOWER_nEN, !(on_true))
-#define VDD_3V3_SENSORS4_EN(on_true)       px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS4_EN, (on_true))
-#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (on_true))
-#define READ_VDD_3V3_SPEKTRUM_POWER_EN()   px4_arch_gpioread(GPIO_VDD_3V3_SPEKTRUM_POWER_EN)
-#define VDD_3V3_SD_CARD_EN(on_true)        px4_arch_gpiowrite(GPIO_VDD_3V3_SD_CARD_EN, (on_true))
-#define VDD_3V3_ETH_POWER_EN(on_true)      px4_arch_gpiowrite(GPIO_ETH_POWER_EN, (on_true))
-
-
-/* Tone alarm output */
-
-#define TONE_ALARM_TIMER        14  /* Timer 14 */
-#define TONE_ALARM_CHANNEL      1  /* PF9 GPIO_TIM14_CH1OUT_2 */
-
-#define GPIO_BUZZER_1           /* PF9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN9)
-
-#define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
-#define GPIO_TONE_ALARM         GPIO_TIM14_CH1OUT_2
-
-/* USB OTG FS
- *
- * PA9  OTG_FS_VBUS VBUS sensing
- */
-#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
-
-/* High-resolution timer */
-#define HRT_TIMER               8  /* use timer8 for the HRT */
-#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
-
-#define HRT_PPM_CHANNEL         /* T8C1 */  1  /* use capture/compare channel 1 */
-#define GPIO_PPM_IN             /* PI5 T8C1 */ GPIO_TIM8_CH1IN_2
-
-/* RC Serial port */
-
-#define RC_SERIAL_PORT                     "/dev/ttyS5"
-
-/* Input Capture Channels. */
-#define INPUT_CAP1_TIMER                  1
-#define INPUT_CAP1_CHANNEL     /* T1C2 */ 2
-#define GPIO_INPUT_CAP1        /*  PE11 */ GPIO_TIM1_CH2IN
-
-/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
-#define PWMIN_TIMER                       4
-#define PWMIN_TIMER_CHANNEL    /* T4C2 */ 2
-#define GPIO_PWM_IN            /* PD13 */ GPIO_TIM4_CH2IN_2
-
-/* Safety Switch is HW version dependent on having an PX4IO
- * So we init to a benign state with the _INIT definition
- * and provide the the non _INIT one for the driver to make a run time
- * decision to use it.
- */
-#define GPIO_nSAFETY_SWITCH_LED_OUT_INIT   /* PD10 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTD|GPIO_PIN10)
-#define GPIO_nSAFETY_SWITCH_LED_OUT        /* PD10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)
-
-/* Enable the FMU to control it if there is no px4io fixme:This should be BOARD_SAFETY_LED(__ontrue) */
-#define GPIO_LED_SAFETY GPIO_nSAFETY_SWITCH_LED_OUT
-
-#define GPIO_SAFETY_SWITCH_IN              /* PF5 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTF|GPIO_PIN5)
-/* Enable the FMU to use the switch it if there is no px4io fixme:This should be BOARD_SAFTY_BUTTON() */
-#define GPIO_BTN_SAFETY GPIO_SAFETY_SWITCH_IN /* Enable the FMU to control it if there is no px4io */
-
-/* Power switch controls ******************************************************/
-
-#define SPEKTRUM_POWER(_on_true)           VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
-
-/*
- * FMUv6X has a separate RC_IN
- *
- * GPIO PPM_IN on PI5 T8CH1
- * SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7
- *   Inversion is possible in the UART and can drive  GPIO PPM_IN as an output
- */
-
-#define GPIO_PPM_IN_AS_OUT             (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTI|GPIO_PIN5)
-#define SPEKTRUM_RX_AS_GPIO_OUTPUT()   px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
-#define SPEKTRUM_RX_AS_UART()          /* Can be left as uart */
-#define SPEKTRUM_OUT(_one_true)        px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
-
-#define SDIO_SLOTNO                    0  /* Only one slot */
-#define SDIO_MINOR                     0
-
-/* SD card bringup does not work if performed on the IDLE thread because it
- * will cause waiting.  Use either:
- *
- *  CONFIG_LIB_BOARDCTL=y, OR
- *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
- */
-
-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
-   !defined(CONFIG_BOARD_INITTHREAD)
-#  warning SDIO initialization cannot be perfomed on the IDLE thread
-#endif
-
-/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
- * this board support the ADC system_power interface, and therefore
- * provides the true logic GPIO BOARD_ADC_xxxx macros.
- */
-#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
-#define BOARD_ADC_USB_VALID     (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
-
-/* FMUv6X never powers off the Servo rail */
-
-#define BOARD_ADC_SERVO_VALID     (1)
-
-#if !defined(BOARD_HAS_LTC44XX_VALIDS) || BOARD_HAS_LTC44XX_VALIDS == 0
-#  define BOARD_ADC_BRICK1_VALID  (1)
-#  define BOARD_ADC_BRICK2_VALID  (0)
-#elif BOARD_HAS_LTC44XX_VALIDS == 1
-#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
-#  define BOARD_ADC_BRICK2_VALID  (0)
-#elif BOARD_HAS_LTC44XX_VALIDS == 2
-#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
-#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
-#elif BOARD_HAS_LTC44XX_VALIDS == 3
-#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
-#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
-#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
-#elif BOARD_HAS_LTC44XX_VALIDS == 4
-#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
-#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
-#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
-#  define BOARD_ADC_BRICK4_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK4_VALID))
-#else
-#  error Unsupported BOARD_HAS_LTC44XX_VALIDS value
-#endif
-
-#define BOARD_ADC_PERIPH_5V_OC  (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_nOC))
-#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_nOC))
-
-
-/* This board provides a DMA pool and APIs */
-#define BOARD_DMA_ALLOC_POOL_SIZE 5120
-
-/* This board provides the board_on_reset interface */
-
-#define BOARD_HAS_ON_RESET 1
-
-#if defined(TRACE_PINS)
-#define GPIO_TRACE                          \
-	GPIO_TRACECLK1,                           \
-	GPIO_TRACED0,                             \
-	GPIO_TRACED1,                             \
-	GPIO_TRACED2,                             \
-	GPIO_TRACED3
-#else
-#define GPIO_TRACE (GPIO_OUTPUT|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
-#endif
-
-#define PX4_GPIO_INIT_LIST { \
-		GPIO_TRACE,                       \
-		PX4_ADC_GPIO,                     \
-		GPIO_HW_VER_REV_DRIVE,            \
-		GPIO_CAN1_TX,                     \
-		GPIO_CAN1_RX,                     \
-		GPIO_CAN2_TX,                     \
-		GPIO_CAN2_RX,                     \
-		GPIO_HEATER_OUTPUT,               \
-		GPIO_nPOWER_IN_A,                 \
-		GPIO_nPOWER_IN_B,                 \
-		GPIO_nPOWER_IN_C,                 \
-		GPIO_VDD_5V_PERIPH_nEN,           \
-		GPIO_VDD_5V_PERIPH_nOC,           \
-		GPIO_VDD_5V_HIPOWER_nEN,          \
-		GPIO_VDD_5V_HIPOWER_nOC,          \
-		GPIO_VDD_3V3_SENSORS4_EN,         \
-		GPIO_VDD_3V3_SPEKTRUM_POWER_EN,   \
-		GPIO_VDD_3V3_SD_CARD_EN,          \
-		GPIO_PD15,                        \
-		GPIO_SYNC,                        \
-		SPI6_nRESET_EXTERNAL1,            \
-		GPIO_ETH_POWER_EN,                \
-		GPIO_NFC_GPIO,                    \
-		GPIO_TONE_ALARM_IDLE,             \
-		GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
-		GPIO_SAFETY_SWITCH_IN,            \
-		GPIO_PG6,                         \
-		GPIO_nARMED_INIT                  \
-	}
-
-#define BOARD_ENABLE_CONSOLE_BUFFER
-
-#define PX4_I2C_BUS_MTD      4,5
-
-
-#define BOARD_NUM_IO_TIMERS 5
-
-__BEGIN_DECLS
-
-/****************************************************************************************************
- * Public Types
- ****************************************************************************************************/
-
-/****************************************************************************************************
- * Public data
- ****************************************************************************************************/
-
-#ifndef __ASSEMBLY__
-
-/****************************************************************************************************
- * Public Functions
- ****************************************************************************************************/
-
-/****************************************************************************
- * Name: stm32_sdio_initialize
- *
- * Description:
- *   Initialize SDIO-based MMC/SD card support
- *
- ****************************************************************************/
-
-int stm32_sdio_initialize(void);
-
-/****************************************************************************************************
- * Name: stm32_spiinitialize
- *
- * Description:
- *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
- *
- ****************************************************************************************************/
-
-extern void stm32_spiinitialize(void);
-
-extern void stm32_usbinitialize(void);
-
-extern void board_peripheral_reset(int ms);
-
-#include <px4_platform_common/board_common.h>
-
-#endif /* __ASSEMBLY__ */
-
-__END_DECLS
@@ -1,128 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file px4fmu_can.c
- *
- * Board-specific CAN functions.
- */
-
-#ifdef CONFIG_CAN
-
-#include <errno.h>
-#include <debug.h>
-
-#include <nuttx/can/can.h>
-#include <arch/board/board.h>
-
-#include "chip.h"
-#include "arm_arch.h"
-
-#include "chip.h"
-#include "stm32_can.h"
-#include "board_config.h"
-
-#ifdef CONFIG_CAN
-
-/************************************************************************************
- * Pre-processor Definitions
- ************************************************************************************/
-/* Configuration ********************************************************************/
-
-#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
-#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
-#  undef CONFIG_STM32_CAN2
-#endif
-
-#ifdef CONFIG_STM32_CAN1
-#  define CAN_PORT 1
-#else
-#  define CAN_PORT 2
-#endif
-
-/************************************************************************************
- * Private Functions
- ************************************************************************************/
-
-/************************************************************************************
- * Public Functions
- ************************************************************************************/
-int can_devinit(void);
-
-/************************************************************************************
- * Name: can_devinit
- *
- * Description:
- *   All STM32 architectures must provide the following interface to work with
- *   examples/can.
- *
- ************************************************************************************/
-
-int can_devinit(void)
-{
-	static bool initialized = false;
-	struct can_dev_s *can;
-	int ret;
-
-	/* Check if we have already initialized */
-
-	if (!initialized) {
-		/* Call stm32_caninitialize() to get an instance of the CAN interface */
-
-		can = stm32_caninitialize(CAN_PORT);
-
-		if (can == NULL) {
-			canerr("ERROR:  Failed to get CAN interface\n");
-			return -ENODEV;
-		}
-
-		/* Register the CAN driver at "/dev/can0" */
-
-		ret = can_register("/dev/can0", can);
-
-		if (ret < 0) {
-			canerr("ERROR: can_register failed: %d\n", ret);
-			return ret;
-		}
-
-		/* Now we are initialized */
-
-		initialized = true;
-	}
-
-	return OK;
-}
-
-#endif
-
-#endif /* CONFIG_CAN */
@@ -1,235 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file px4fmu2_led.c
- *
- * PX4FMU LED backend.
- */
-
-#include <px4_platform_common/px4_config.h>
-
-#include <stdbool.h>
-
-#include "chip.h"
-#include "stm32_gpio.h"
-#include "board_config.h"
-
-#include <nuttx/board.h>
-#include <arch/board/board.h>
-
-/*
- * Ideally we'd be able to get these from arm_internal.h,
- * but since we want to be able to disable the NuttX use
- * of leds for system indication at will and there is no
- * separate switch, we need to build independent of the
- * CONFIG_ARCH_LEDS configuration switch.
- */
-__BEGIN_DECLS
-extern void led_init(void);
-extern void led_on(int led);
-extern void led_off(int led);
-extern void led_toggle(int led);
-__END_DECLS
-
-#ifdef CONFIG_ARCH_LEDS
-static bool nuttx_owns_leds = true;
-//                                B  R  S  G
-//                                0  1  2  3
-static const uint8_t xlatpx4[] = {1, 2, 4, 0};
-#  define xlat(p) xlatpx4[(p)]
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
-	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
-	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
-	GPIO_nSAFETY_SWITCH_LED_OUT,  // Indexed by LED_SAFETY by xlatpx4
-};
-
-#else
-
-#  define xlat(p) (p)
-static uint32_t g_ledmap[] = {
-	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
-	GPIO_nLED_RED,                      // Indexed by LED_RED, LED_AMBER
-	0,                                  // Indexed by LED_SAFETY (defaulted to an input)
-	GPIO_nLED_GREEN,                    // Indexed by LED_GREEN
-};
-
-#endif
-
-__EXPORT void led_init(void)
-{
-	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
-		if (g_ledmap[l] != 0) {
-			stm32_configgpio(g_ledmap[l]);
-		}
-	}
-}
-
-static void phy_set_led(int led, bool state)
-{
-	/* Drive Low to switch on */
-
-	if (g_ledmap[led] != 0) {
-		stm32_gpiowrite(g_ledmap[led], !state);
-	}
-}
-
-static bool phy_get_led(int led)
-{
-	/* If Low it is on */
-	if (g_ledmap[led] != 0) {
-		return !stm32_gpioread(g_ledmap[led]);
-	}
-
-	return false;
-}
-
-__EXPORT void led_on(int led)
-{
-	phy_set_led(xlat(led), true);
-}
-
-__EXPORT void led_off(int led)
-{
-	phy_set_led(xlat(led), false);
-}
-
-__EXPORT void led_toggle(int led)
-{
-	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
-}
-
-#ifdef CONFIG_ARCH_LEDS
-/****************************************************************************
- * Public Functions
- ****************************************************************************/
-
-/****************************************************************************
- * Name: board_autoled_initialize
- ****************************************************************************/
-
-void board_autoled_initialize(void)
-{
-	led_init();
-}
-
-/****************************************************************************
- * Name: board_autoled_on
- ****************************************************************************/
-
-void board_autoled_on(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_HEAPALLOCATE:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_IRQSENABLED:
-		phy_set_led(BOARD_LED_BLUE, false);
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_STACKCREATED:
-		phy_set_led(BOARD_LED_GREEN, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, true);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, true);
-		phy_set_led(BOARD_LED_BLUE, true);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, true);
-		break;
-	}
-}
-
-/****************************************************************************
- * Name: board_autoled_off
- ****************************************************************************/
-
-void board_autoled_off(int led)
-{
-	if (!nuttx_owns_leds) {
-		return;
-	}
-
-	switch (led) {
-	default:
-		break;
-
-	case LED_SIGNAL:
-		phy_set_led(BOARD_LED_GREEN, false);
-		break;
-
-	case LED_INIRQ:
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_ASSERTION:
-		phy_set_led(BOARD_LED_RED, false);
-		phy_set_led(BOARD_LED_BLUE, false);
-		break;
-
-	case LED_PANIC:
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-
-	case LED_IDLE : /* IDLE */
-		phy_set_led(BOARD_LED_RED, false);
-		break;
-	}
-}
-
-#endif /* CONFIG_ARCH_LEDS */
@@ -1,202 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (c) 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
- * @file manifest.c
- *
- * This module supplies the interface to the manifest of hardware that is
- * optional and dependent on the HW REV and HW VER IDs
- *
- * The manifest allows the system to know whether a hardware option
- * say for example the PX4IO is an no-pop option vs it is broken.
- *
- */
-
-/****************************************************************************
- * Included Files
- ****************************************************************************/
-
-#include <nuttx/config.h>
-#include <board_config.h>
-
-#include <inttypes.h>
-#include <stdbool.h>
-#include <syslog.h>
-
-#include "systemlib/px4_macros.h"
-
-/****************************************************************************
- * Pre-Processor Definitions
- ****************************************************************************/
-
-typedef struct {
-	uint32_t                hw_ver_rev; /* the version and revision */
-	const px4_hw_mft_item_t *mft;       /* The first entry */
-	uint32_t                entries;    /* the lenght of the list */
-} px4_hw_mft_list_entry_t;
-
-typedef px4_hw_mft_list_entry_t *px4_hw_mft_list_entry;
-#define px4_hw_mft_list_uninitialized (px4_hw_mft_list_entry) -1
-
-static const px4_hw_mft_item_t device_unsupported = {0, 0, 0};
-
-// List of components on a specific board configuration
-// The index of those components is given by the enum (px4_hw_mft_item_id_t)
-// declared in board_common.h
-static const px4_hw_mft_item_t hw_mft_list_v0600[] = {
-	{
-		//  PX4_MFT_PX4IO
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-	{
-		// PX4_MFT_USB
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-	{
-		// PX4_MFT_CAN2
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-};
-
-static const px4_hw_mft_item_t hw_mft_list_v0610[] = {
-	{
-		//  PX4_MFT_PX4IO
-		.present     = 0,
-		.mandatory   = 0,
-		.connection  = px4_hw_con_unknown,
-	},
-	{
-		// PX4_MFT_USB
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-	{
-		// PX4_MFT_CAN2
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-};
-
-static const px4_hw_mft_item_t hw_mft_list_v0650[] = {
-	{
-		//  PX4_MFT_PX4IO
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_unknown,
-	},
-	{
-		// PX4_MFT_USB
-		.present     = 1,
-		.mandatory   = 1,
-		.connection  = px4_hw_con_onboard,
-	},
-	{
-		// PX4_MFT_CAN2
-		.present     = 0,
-		.mandatory   = 0,
-		.connection  = px4_hw_con_unknown,
-	},
-};
-
-
-static px4_hw_mft_list_entry_t mft_lists[] = {
-//  ver_rev
-	{V6X00, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)},
-	{V6X01, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2
-	{V6X03, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 3
-	{V6X40, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, //                       HB CM4 base
-	{V6X41, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2  HB CM4 base
-	{V6X43, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, HB CM4 base Sensor Set 3
-	{V6X44, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, HB CM4 base Sensor Set 4
-	{V6X50, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, //                       HB Mini
-	{V6X51, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2  HB Mini
-	{V6X53, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2, HB Mini Sensor Set 3
-	{V6X54, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2, HB Mini Sensor Set 4
-	{V6X10, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO
-	{V6X13, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 3
-	{V6X04, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 4
-	{V6X14, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 4
-};
-
-/************************************************************************************
- * Name: board_query_manifest
- *
- * Description:
- *   Optional returns manifest item.
- *
- * Input Parameters:
- *   manifest_id - the ID for the manifest item to retrieve
- *
- * Returned Value:
- *   0 - item is not in manifest => assume legacy operations
- *   pointer to a manifest item
- *
- ************************************************************************************/
-
-__EXPORT px4_hw_mft_item board_query_manifest(px4_hw_mft_item_id_t id)
-{
-	static px4_hw_mft_list_entry boards_manifest = px4_hw_mft_list_uninitialized;
-
-	if (boards_manifest == px4_hw_mft_list_uninitialized) {
-		uint32_t ver_rev = board_get_hw_version() << 8;
-		ver_rev |= board_get_hw_revision();
-
-		for (unsigned i = 0; i < arraySize(mft_lists); i++) {
-			if (mft_lists[i].hw_ver_rev == ver_rev) {
-				boards_manifest = &mft_lists[i];
-				break;
-			}
-		}
-
-		if (boards_manifest == px4_hw_mft_list_uninitialized) {
-			syslog(LOG_ERR, "[boot] Board %4" PRIx32 " is not supported!\n", ver_rev);
-		}
-	}
-
-	px4_hw_mft_item rv = &device_unsupported;
-
-	if (boards_manifest != px4_hw_mft_list_uninitialized &&
-	    id < boards_manifest->entries) {
-		rv = &boards_manifest->mft[id];
-	}
-
-	return rv;
-}
@@ -1,103 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <nuttx/spi/spi.h>
-#include <px4_platform_common/px4_manifest.h>
-//                                                              KiB BS    nB
-static const px4_mft_device_t spi5 = {             // FM25V02A on FMUM 32K 512 X 64
-	.bus_type = px4_mft_device_t::SPI,
-	.devid    = SPIDEV_FLASH(0)
-};
-static const px4_mft_device_t i2c3 = {             // 24LC64T on Base  8K 32 X 256
-	.bus_type = px4_mft_device_t::I2C,
-	.devid    = PX4_MK_I2C_DEVID(3, 0x51)
-};
-
-static const px4_mtd_entry_t fmum_fram = {
-	.device = &spi5,
-	.npart = 2,
-	.partd = {
-		{
-			.type = MTD_PARAMETERS,
-			.path = "/fs/mtd_params",
-			.nblocks = 32
-		},
-		{
-			.type = MTD_WAYPOINTS,
-			.path = "/fs/mtd_waypoints",
-			.nblocks = 32
-
-		}
-	},
-};
-
-static const px4_mtd_entry_t base_eeprom = {
-	.device = &i2c3,
-	.npart = 2,
-	.partd = {
-		{
-			.type = MTD_MFT,
-			.path = "/fs/mtd_mft",
-			.nblocks = 248
-		},
-		{
-			.type = MTD_NET,
-			.path = "/fs/mtd_net",
-			.nblocks = 8 // 256 = 32 * 8
-
-		}
-	},
-};
-
-static const px4_mtd_manifest_t board_mtd_config = {
-	.nconfigs   = 2,
-	.entries = {
-		&fmum_fram,
-		&base_eeprom,
-	}
-};
-
-static const px4_mft_entry_s mtd_mft = {
-	.type = MTD,
-	.pmft = (void *) &board_mtd_config,
-};
-
-static const px4_mft_s mft = {
-	.nmft = 1,
-	.mfts = &mtd_mft
-};
-
-const px4_mft_s *board_get_manifest(void)
-{
-	return &mft;
-}
@@ -1,86 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2020, 2022 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name PX4 nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-#include <px4_arch/spi_hw_description.h>
-#include <drivers/drv_sensor.h>
-#include <nuttx/spi/spi.h>
-
-constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSIONS] = {
-	initSPIHWVersion(HW_VER_REV(0, 0), {
-		initSPIBus(SPI::Bus::SPI1, {
-			initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
-		}, {GPIO::PortI, GPIO::Pin11}),
-		initSPIBus(SPI::Bus::SPI2, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
-		}, {GPIO::PortF, GPIO::Pin4}),
-		initSPIBus(SPI::Bus::SPI3, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
-		}, {GPIO::PortE, GPIO::Pin7}),
-		//  initSPIBus(SPI::Bus::SPI4, {
-		//    // no devices
-		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
-		//  }, {GPIO::PortG, GPIO::Pin8}),
-		initSPIBus(SPI::Bus::SPI5, {
-			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
-		}),
-		initSPIBusExternal(SPI::Bus::SPI6, {
-			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
-			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
-		}),
-	}),
-
-	initSPIHWVersion(HW_VER_REV(0, 3), {
-		initSPIBus(SPI::Bus::SPI1, {
-			initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
-		}, {GPIO::PortI, GPIO::Pin11}),
-		initSPIBus(SPI::Bus::SPI2, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
-		}, {GPIO::PortF, GPIO::Pin4}),
-		initSPIBus(SPI::Bus::SPI3, {
-			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
-		}, {GPIO::PortE, GPIO::Pin7}),
-		//  initSPIBus(SPI::Bus::SPI4, {
-		//    // no devices
-		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
-		//  }, {GPIO::PortG, GPIO::Pin8}),
-		initSPIBus(SPI::Bus::SPI5, {
-			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
-		}),
-		initSPIBusExternal(SPI::Bus::SPI6, {
-			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
-			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
-		}),
-	}),
-};
-
-static constexpr bool unused = validateSPIConfig(px4_spi_buses_all_hw);
@@ -140,7 +140,8 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -162,7 +162,8 @@ CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -1,5 +1,5 @@
 CONFIG_PLATFORM_POSIX=y
-CONFIG_BOARD_LINUX_TARGET=y
+CONFIG_BOARD_LINUX=y
 CONFIG_BOARD_TOOLCHAIN="arm-linux-gnueabihf"
 CONFIG_BOARD_ARCHITECTURE="cortex-a8"
 CONFIG_BOARD_TESTING=y
@@ -126,7 +126,8 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -125,7 +125,8 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -108,7 +108,8 @@ CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -139,7 +139,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -111,7 +111,6 @@ MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
 	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
 	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
@@ -187,12 +186,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > AXI_SRAM AT > FLASH

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -138,7 +138,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -111,7 +111,6 @@ MEMORY
 {
 	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
 	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
-
 	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
 	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
 	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
@@ -187,12 +186,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > AXI_SRAM AT > FLASH

 	.bss : {
 		_sbss = ABSOLUTE(.);
@@ -4,10 +4,10 @@ CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_RPM=n
+CONFIG_DRIVERS_UAVCAN=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n
 CONFIG_MODULES_ROVER_POS_CONTROL=n
 CONFIG_BOARD_TESTING=y
 CONFIG_DRIVERS_TEST_PPM=y
 CONFIG_SYSTEMCMDS_MICROBENCH=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=n
@@ -140,7 +140,8 @@ CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
-CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
@@ -187,12 +187,7 @@ SECTIONS
 		*(.gnu.linkonce.d.*)
 		CONSTRUCTORS
 		_edata = ABSOLUTE(.);
-
-		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
-		. = ALIGN(16);
-		FILL(0xffff)
-		. += 16;
-	} > AXI_SRAM AT > FLASH  = 0xffff
+	} > AXI_SRAM AT > FLASH

 	.bss : {
 		_sbss = ABSOLUTE(.);
--- a/Show More
+++ b/Show More