github: fix workspace path

we are removing the gazebo sim tools from this image for now
as we are trying to slim down the image

.ci/Jenkinsfile-compile

@@ -60,6 +60,8 @@ pipeline {
                      "holybro_kakutef7_default",
                      "holybro_pix32v5_default",
                      "matek_h743-slim",
+                     "matek_gnss-m9n-f4_canbootloader",
+                     "matek_gnss-m9n-f4_default",
                      "modalai_fc-v1_default",
                      "modalai_fc-v1_rtps",
                      "modalai_fc-v2_default",

.ci/Jenkinsfile-hardware

@@ -743,8 +743,10 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
   sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
 
   // run logger
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
@@ -778,6 +780,7 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
@@ -789,7 +792,7 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
@@ -806,12 +809,14 @@ void resetParameters() {
 void runTests() {
 
   // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 4018 6001 8001 10016'
 
   resetParameters()
 
   sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_CAL_EN" --value "0" || true' // disable during testing
   sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_FFT_EN" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_IMU_AUTOCAL" --value "0" || true' // disable during testing
+  sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SENS_MAG_AUTOCAL" --value "0" || true' // disable during testing
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
   sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply

.clusterfuzzlite/Dockerfile

@@ -0,0 +1,7 @@
+FROM gcr.io/oss-fuzz-base/base-builder:v1
+COPY . $SRC/PX4-Autopilot
+RUN apt-get install -y libjpeg8-dev zlib1g-dev
+RUN pip3 install --upgrade pip
+RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
+WORKDIR $SRC/PX4-Autopilot
+COPY ./.clusterfuzzlite/build.sh $SRC/

.clusterfuzzlite/build.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash -eu
+
+PX4_FUZZ=1 make px4_sitl
+cp build/px4_sitl_default/bin/px4 $OUT/px4

.clusterfuzzlite/project.yaml

@@ -0,0 +1 @@
+language: c++

.github/workflows/build_docker.yml

@@ -0,0 +1,154 @@
+# build docker images on:
+# * every pull request
+# * push to master
+# * stable release published
+# * tag name is:
+#   - commit sha if pull request
+#   - 'latest' if push to master
+#   - release name if release
+
+# pushes to registry if:
+# * is not a pull request
+# * is master branch
+# * is the result of release
+
+# builds all nuttx targets and deploys metadata
+
+name: Build docker
+
+on:
+  release:
+    types: [released]
+  push:
+    branches:
+      - 'master'
+  pull_request:
+
+jobs:
+  set_docker_tag:
+    name: Set docker tag
+    runs-on: ubuntu-latest
+    env:
+      DOCKER_TAG: "px4io/px4-dev"
+    outputs:
+      docker_tag: ${{ steps.set-outputs.outputs.docker_tag }}
+
+    steps:
+      - name: Set pull request docker tag
+        if: github.event_name == 'pull_request'
+        run: echo "DOCKER_TAG=px4io/px4-dev:${{ github.sha }}" >> $GITHUB_ENV
+
+      - name: Set push docker tag
+        if: github.event_name == 'push'
+        run: echo "DOCKER_TAG=px4io/px4-dev:latest" >> $GITHUB_ENV
+
+      - name: Set release docker tag
+        if: github.event_name == 'release'
+        run: echo "DOCKER_TAG=px4io/px4-dev:${{ github.event.release.name }}" >> $GITHUB_ENV
+
+      - name: Set docker tag outputs
+        id: set-outputs
+        run: echo "::set-output name=docker_tag::$DOCKER_TAG"
+
+  build_docker:
+    name: Build Docker image
+    runs-on: ubuntu-latest
+    needs: set_docker_tag
+
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v2
+
+      - name: Login to Github Registry
+        uses: docker/login-action@v1
+        if: github.event_name == 'push'
+        with:
+          registry: ghrc.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up image builder
+        uses: docker/setup-buildx-action@v1
+
+      - name: Build image
+        uses: docker/build-push-action@v2
+        id: docker_build
+        with:
+          file: Tools/setup/Dockerfile
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ needs.set_docker_tag.outputs.docker_tag }}
+          outputs: type=tar,dest=/tmp/px4_docker_image.tar
+
+      - name: Save container to artifacts
+        uses: actions/upload-artifact@v2
+        with:
+          name: px4_docker_image
+          path: /tmp/px4_docker_image.tar
+
+      - name: Push to Github Registry
+        uses: docker/build-push-action@v2
+        if: github.event_name == 'push'
+
+      - name: Image Digest
+        run: echo ${{ steps.docker_build.outputs.digest }}
+
+  list_targets:
+    name: Generate target list
+    runs-on: ubuntu-latest
+    needs: build_docker
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+
+    steps:
+      - name: Checkout Code
+        uses: actions/checkout@v2
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.9
+
+      #- name: Install Python packages
+        #run: pip install -r Tools/setup/requirements.txt
+        #run: pip install kconfiglib
+
+      - id: set-matrix
+        name: Get all nuttx targets
+        run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py -a)"
+
+  build_px4:
+    name: Build targets with Docker
+    runs-on: ubuntu-latest
+    needs: [list_targets, set_docker_tag]
+    #strategy:
+      #matrix: ${{ fromJson(needs.enumerate_targets.outputs.matrix) }}
+
+    steps:
+      - name: Get container from artifacts
+        uses: actions/download-artifact@v2
+        with:
+          name: px4_docker_image
+          path: /tmp
+
+      - name: Load Docker image
+        run: |
+          docker import /tmp/px4_docker_image.tar ${{ needs.set_docker_tag.outputs.docker_tag }}
+          docker image ls -a
+
+      - name: Checkout Code
+        uses: actions/checkout@v2
+
+      - name: Build targets
+        #run: |
+          #docker run --rm -w "${GITHUB_ACTION_PATH}" \
+            #--env=LOCAL_USER_ID="$(id -u)" \
+            #--volume=/tmp:/tmp:rw \
+            #--volume=${GITHUB_ACTION_PATH}:${GITHUB_ACTION_PATH}:rw \
+            #px4io/px4-dev:${{ needs.set_docker_tag.outputs.docker_tag }} /bin/bash -c "make ${{ matrix.target }}"
+
+        run: |
+          docker run --rm -w ${{ github.workspace }} \
+            --env=LOCAL_USER_ID="$(id -u)" \
+            --volume=/tmp:/tmp:rw \
+            --volume=${{ github.workspace }}:${{ github.workspace }}:rw \
+            ${{ needs.set_docker_tag.outputs.docker_tag }} /bin/bash -c "make px4_fmu-v6x"

.github/workflows/cflite_batch.yml

@@ -0,0 +1,34 @@
+name: ClusterFuzzLite batch fuzzing
+on:
+  schedule:
+    - cron: '0 6 * * *'  # UTC 6am every day.
+permissions: read-all
+jobs:
+  BatchFuzzing:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        sanitizer:
+        - address
+        - undefined
+        - memory
+    steps:
+    - name: Build Fuzzers (${{ matrix.sanitizer }})
+      id: build
+      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
+      with:
+        sanitizer: ${{ matrix.sanitizer }}
+    - name: Run Fuzzers (${{ matrix.sanitizer }})
+      id: run
+      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        fuzz-seconds: 1800 # 30 mins
+        mode: 'batch'
+        sanitizer: ${{ matrix.sanitizer }}
+        # Optional but recommended: For storing certain artifacts from fuzzing.
+        # See later section on "Git repo for storage".
+        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
+        # storage-repo-branch: main   # Optional. Defaults to "main"
+        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".

.github/workflows/compile_linux.yml

@@ -1,54 +0,0 @@
-name: Linux Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-armhf:2021-09-08
-    strategy:
-      matrix:
-        config: [
-          beaglebone_blue_default,
-          emlid_navio2_default,
-          px4_raspberrypi_default,
-          scumaker_pilotpi_default,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-    - name: ccache post-run
-      run: ccache -s

.github/workflows/compile_linux_arm64.yml

@@ -1,51 +0,0 @@
-name: Linux ARM64 Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-aarch64:2021-09-08
-    strategy:
-      matrix:
-        config: [
-          scumaker_pilotpi_arm64,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-    - name: ccache post-run
-      run: ccache -s

.github/workflows/compile_nuttx.yml

@@ -1,118 +0,0 @@
-name: Nuttx Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-09-08
-    strategy:
-      fail-fast: false
-      matrix:
-        config: [
-          airmind_mindpx-v2,
-          ark_can-flow,
-          ark_can-gps,
-          ark_can-rtk-gps,
-          atl_mantis-edu,
-          av_x-v1,
-          bitcraze_crazyflie,
-          bitcraze_crazyflie21,
-          cuav_can-gps-v1,
-          cuav_nora,
-          cuav_x7pro,
-          cubepilot_cubeorange,
-          cubepilot_cubeyellow,
-          freefly_can-rtk-gps,
-          holybro_can-gps-v1,
-          holybro_durandal-v1,
-          holybro_kakutef7,
-          holybro_pix32v5,
-          matek_h743-slim,
-          modalai_fc-v1,
-          modalai_fc-v2,
-          mro_ctrl-zero-f7,
-          mro_ctrl-zero-f7-oem,
-          mro_ctrl-zero-h7,
-          mro_ctrl-zero-h7-oem,
-          mro_pixracerpro,
-          mro_x21,
-          mro_x21-777,
-          nxp_fmuk66-e,
-          nxp_fmuk66-v3,
-          nxp_fmurt1062-v1,
-          nxp_ucans32k146,
-          omnibus_f4sd,
-          raspberrypi_pico,
-          px4_fmu-v2,
-          px4_fmu-v3,
-          px4_fmu-v4,
-          px4_fmu-v4pro,
-          px4_fmu-v5,
-          px4_fmu-v5x,
-          px4_fmu-v6u,
-          px4_fmu-v6x,
-          spracing_h7extreme,
-          uvify_core
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 120M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make all_variants_${{matrix.config}}
-      run: make all_variants_${{matrix.config}}
-      timeout-minutes: 45
-    - name: make ${{matrix.config}} bloaty_compileunits
-      run: make ${{matrix.config}} bloaty_compileunits || true
-    - name: make ${{matrix.config}} bloaty_inlines
-      run: make ${{matrix.config}} bloaty_inlines || true
-    - name: make ${{matrix.config}} bloaty_segments
-      run: make ${{matrix.config}} bloaty_segments || true
-    - name: make ${{matrix.config}} bloaty_symbols
-      run: make ${{matrix.config}} bloaty_symbols || true
-    - name: make ${{matrix.config}} bloaty_templates
-      run: make ${{matrix.config}} bloaty_templates || true
-    - name: make ${{matrix.config}} bloaty_ram
-      run: make ${{matrix.config}} bloaty_ram || true
-    - name: make ${{matrix.config}} bloaty_compare_master
-      run: make ${{matrix.config}} bloaty_compare_master || true
-    - name: ccache post-run
-      run: ccache -s
-
-    - name: Upload px4 package
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_package_${{matrix.config}}
-        path: |
-          build/**/*.px4
-          build/**/*.bin

.github/workflows/deploy_all.yml

@@ -1,11 +1,17 @@
-name: Deploy metadata for all targets
+name: Build and deploy all targets with metadata
 
 on:
+  release:
+    types: [published]
+  create:
+    tags:
+      - 'v*'
   push:
     branches:
     - 'master'
     - 'release/*'
     - 'pr-metadata-test'
+    - 'build_and_deploy_mix'
 
 jobs:
   enumerate_targets:
@@ -18,8 +24,8 @@ jobs:
       with:
         token: ${{secrets.ACCESS_TOKEN}}
     - id: set-matrix
-      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
-  build:
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py -a)"
+  build_all:
     runs-on: ubuntu-latest
     needs: enumerate_targets
     strategy:
@@ -34,21 +40,4 @@ jobs:
       run: make ${{matrix.target}}
 
     - name: parameter & events metadata
-      run: |
-        make ${{matrix.target}} ver_gen events_json actuators_json
-        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
-        cd build/${{ matrix.target }}
-        mkdir _metadata || true
-        cp parameters.* events/*.xz actuators.json* _metadata
-
-    - uses: jakejarvis/s3-sync-action@master
-      with:
-        args: --acl public-read
-      env:
-        AWS_S3_BUCKET: 'px4-travis'
-        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-        AWS_REGION: 'us-west-1'
-        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
-        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
-
+      run: make ${{matrix.target}} ver_gen events_json actuators_json

.vscode/cmake-variants.yaml

@@ -196,6 +196,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: matek_h743-slim_default
+    matek_gnss-m9n-f4_canbootloader:
+      short: matek_gnss-m9n-f4_canbootloader
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_m9nf4can_canbootloader
+    matek_gnss-m9n-f4_default:
+      short: matek_gnss-m9n-f4_default
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_gnss-m9n-f4_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel

CMakeLists.txt

@@ -125,6 +125,11 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                  FULL_DOCS "List of all PX4 module libraries"
                  )
 
+define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
+                 BRIEF_DOCS "PX4 kernel side module libs"
+                 FULL_DOCS "List of all PX4 kernel module libraries"
+                 )
+
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                  BRIEF_DOCS "PX4 module paths"
                  FULL_DOCS "List of paths to all PX4 modules"
@@ -142,6 +147,7 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
 
 include(px4_add_module)
 set(config_module_list)
+set(config_kernel_list)
 
 # Find Python
 # If using catkin, Python 2 is found since it points

Kconfig

@@ -118,6 +118,11 @@ config BOARD_CRYPTO
     help
         Enable PX4 Crypto Support. Select the implementation under drivers
 
+config BOARD_PROTECTED
+    bool "Memory protection"
+    help
+        Enable memory protection via MPU/MMU
+
 menu "Serial ports"
 
     config BOARD_SERIAL_URT6

LICENSE

@@ -1,6 +1,6 @@
 BSD 3-Clause License
 
-Copyright (c) 2012 - 2021, PX4 Development Team
+Copyright (c) 2012 - 2022, PX4 Development Team
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

Makefile

@@ -158,6 +158,11 @@ else
 		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif
 
+	# Fuzz Testing
+	ifdef PX4_FUZZ
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
+	endif
+
 endif
 
 # Pick up specific Python path if set

ROMFS/px4fmu_common/init.d-posix/rc.replay

@@ -10,7 +10,7 @@ fi
 
 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
 fi
 
 publisher_rules_file="orb_publisher.rules"
@@ -21,6 +21,7 @@ ignore_others: false
 EOF
 
 param set SDLOG_DIRS_MAX 7
+param set SDLOG_PROFILE 3
 
 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams

ROMFS/px4fmu_common/init.d/airframes/10016_3dr_iris

@@ -35,6 +35,6 @@ param set-default MC_YAWRATE_P 0.25
 param set-default MC_YAWRATE_I 0.25
 
 param set-default BAT1_V_DIV 12.27559
-param set-default BAT1_A_PER_V 15.39103
+param set-default BAT1_A_PER_V 15.391030303103
 
 set MIXER quad_w

ROMFS/px4fmu_common/init.d/airframes/1100_rc_quad_x_sih.hil

@@ -15,6 +15,8 @@
 set MIXER quad_x
 set PWM_OUT 1234
 
+param set UAVCAN_ENABLE 0
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2
 

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -15,6 +15,8 @@
 set MIXER AERT
 set PWM_OUT 1234
 
+param set UAVCAN_ENABLE 0
+
 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set-default SYS_HITL 2
 

ROMFS/px4fmu_common/init.d/airframes/1102_tailsitter_duo_sih.hil

@@ -0,0 +1,61 @@
+#!/bin/sh
+#
+# @name SIH Tailsitter Duo
+#
+# @type Simulation
+# @class VTOL
+#
+# @output MAIN1 motor right
+# @output MAIN2 motor left
+# @output MAIN5 elevon right
+# @output MAIN6 elevon left
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+param set UAVCAN_ENABLE 0
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_MOT_COUNT 2
+param set-default VT_TYPE 0
+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.3
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default MAV_TYPE 19
+set MAV_TYPE 19
+set MIXER vtol_tailsitter_duo_sat
+
+set PWM_OUT 1234
+
+# set SYS_HITL to 2 to start the SIH and avoid sensors startup
+param set-default SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set SIH_T_MAX 2.0
+param set SIH_Q_MAX 0.0165
+param set SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set SIH_IXX 0.00354
+param set SIH_IYY 0.000625
+param set SIH_IZZ 0.00300
+param set SIH_IXZ 0.0
+param set SIH_KDV 0.2
+param set SIH_L_ROLL 0.145
+
+# sih as tailsitter
+param set SIH_VEHICLE_TYPE 2

ROMFS/px4fmu_common/init.d/airframes/4019_x500_v2

@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Holybro X500 V2
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Farhang Naderi <farhang.nba@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default IMU_GYRO_CUTOFF 30
+
+param set-default MC_ROLLRATE_P 0.14
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_ROLLRATE_I 0.3
+param set-default MC_PITCHRATE_I 0.3
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCHRATE_D 0.004

ROMFS/px4fmu_common/init.d/airframes/4061_atl_mantis_edu

@@ -16,8 +16,10 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-set MIXER none
-set MIXER_AUX none
+# We set the mixer and ESC manually.
+set MIXER skip
+set MIXER_AUX skip
+set MIXER_FILE ""
 
 # Battery settings
 param set-default BAT_CRIT_THR 0.20
@@ -33,12 +35,13 @@ param set-default CBRK_SUPPLY_CHK 894281
 
 param set-default COM_DISARM_LAND 0.1
 param set-default COM_DISARM_PRFLT 3
-param set-default COM_FLTMODE1 -1
+param set-default COM_DL_LOSS_T 10
+param set-default COM_FLTMODE1  2
 param set-default COM_FLTMODE2 -1
 param set-default COM_FLTMODE3 -1
-param set-default COM_FLTMODE4  2
+param set-default COM_FLTMODE4 -1
 param set-default COM_FLTMODE5 -1
-param set-default COM_FLTMODE6  6
+param set-default COM_FLTMODE6  1
 param set-default COM_RC_LOSS_T 3
 
 
@@ -68,6 +71,9 @@ param set-default EKF2_OF_GATE 2.0
 param set-default EKF2_OF_POS_X -0.035
 param set-default EKF2_OF_POS_Y 0.0
 param set-default EKF2_OF_POS_Z 0.033
+param set-default EKF2_OF_MIN_RNG 0.01
+param set-default EKF2_OF_A_HMAX 7.0
+param set-default EKF2_OF_QMIN 30
 
 param set-default EKF2_PCOEF_XN -0.3
 param set-default EKF2_PCOEF_XP -0.4
@@ -142,57 +148,30 @@ param set-default MPC_Z_VEL_P 0.27
 
 # gimbal configuration
 param set-default MNT_MODE_IN 1
-param set-default MNT_MODE_OUT 2
-param set-default MNT_MAN_PITCH 1
-
+param set-default MNT_MODE_OUT 1
+param set-default MNT_MAN_PITCH 2
+param set-default MNT_RC_IN_MODE 1
+param set-default MNT_RATE_PITCH 30
 
 # RC
 param set-default RC_CHAN_CNT       12
 
 param set-default RC_MAP_THROTTLE   1
-param set-default RC_MAP_ROLL       2
+param set-default RC_MAP_YAW        2
 param set-default RC_MAP_PITCH      3
-param set-default RC_MAP_YAW        4
-param set-default RC_MAP_FLTMODE    5
-param set-default RC_MAP_AUX1       7
-
-param set-default RC1_DZ            10
-param set-default RC1_MAX           3413
-param set-default RC1_MIN           683
-param set-default RC1_REV           1
-param set-default RC1_TRIM          683
-param set-default RC2_DZ            10
-param set-default RC2_MAX           3413
-param set-default RC2_MIN           683
-param set-default RC2_REV           -1
-param set-default RC2_TRIM          2048
-param set-default RC3_DZ            10
-param set-default RC3_MAX           3413
-param set-default RC3_MIN           683
-param set-default RC3_REV           1
-param set-default RC3_TRIM          2048
-param set-default RC4_DZ            10
-param set-default RC4_MAX           3413
-param set-default RC4_MIN           683
-param set-default RC4_REV           -1
-param set-default RC4_TRIM          2048
-param set-default RC5_DZ            10
-param set-default RC5_MAX           3414
-param set-default RC5_MIN           2048
-param set-default RC5_REV           1
-param set-default RC5_TRIM          2048
-param set-default RC7_DZ            10
-param set-default RC7_MAX           3413
-param set-default RC7_MIN           683
-param set-default RC7_REV           1
-param set-default RC7_TRIM          2048
+param set-default RC_MAP_ROLL       4
+param set-default RC_MAP_AUX2       5
+param set-default RC_MAP_AUX3       10
+param set-default RC_MAP_AUX4       8
+param set-default RC_MAP_FLTMODE    6
+param set-default RC1_TRIM          1000
 
 
 # optical flow
 param set-default SENS_FLOW_MAXR   7.4
 param set-default SENS_FLOW_MINHGT 0.15
 param set-default SENS_FLOW_MAXHGT 5.0
-param set-default SENS_FLOW_ROT    4
+param set-default SENS_FLOW_ROT    0
 
-
-mixer load /dev/tap_esc /etc/mixers/quad_x.main.mix
+# ignore the SD card errors and use normal startup sound
+set STARTUP_TUNE "1"

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -40,6 +40,7 @@ px4_add_romfs_files(
 	1002_standard_vtol.hil
 	1100_rc_quad_x_sih.hil
 	1101_rc_plane_sih.hil
+	1102_tailsitter_duo_sih.hil
 
 	# [2000, 2999] Standard planes"
 	2100_standard_plane
@@ -72,6 +73,7 @@ px4_add_romfs_files(
 	4016_holybro_px4vision
 	4017_nxp_hovergames
 	4018_s500_ctrlalloc
+	4019_x500_v2
 	4030_3dr_solo
 	4031_3dr_quad
 	4040_reaper

ROMFS/px4fmu_common/init.d/rc.interface

@@ -45,7 +45,7 @@ fi
 #
 # Set the default output mode if none was set.
 #
-if [ $OUTPUT_MODE = none ]
+if [ $OUTPUT_MODE = none -a $OUTPUT_MODE != skip ]
 then
 	if [ $USE_IO = yes ]
 	then
@@ -72,7 +72,7 @@ fi
 #
 # If OUTPUT_MODE = none then something is wrong with setup and we shouldn't try to enable output.
 #
-if [ $OUTPUT_MODE != none ]
+if [ $OUTPUT_MODE != none -a $OUTPUT_MODE != skip ]
 then
 
 	if [ $OUTPUT_MODE = hil -o $OUTPUT_MODE = sim ]

ROMFS/px4fmu_common/init.d/rc.mc_defaults

@@ -7,7 +7,10 @@
 
 set VEHICLE_TYPE mc
 
-param set-default IMU_GYRO_RATEMAX 800
+if param compare IMU_GYRO_RATEMAX 400
+then
+	param set-default IMU_GYRO_RATEMAX 800
+fi
 
 param set-default NAV_ACC_RAD 2
 

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -130,6 +130,13 @@ then
 	fi
 fi
 
+# SHT3x temperature and hygrometer sensor, external I2C
+if param compare -s SENS_EN_SHT3X 1
+then
+	sht3x start -X
+	sht3x start -X -a 0x45
+fi
+
 # TE MS4525 differential pressure sensor external I2C
 if param compare -s SENS_EN_MS4525 1
 then

ROMFS/px4fmu_common/init.d/rcS

@@ -291,15 +291,9 @@ else
 		# Start core UAVCAN module.
 		if uavcan start
 		then
-			if param greater UAVCAN_ENABLE 1
+			if param greater UAVCAN_ENABLE 2
 			then
-				# Start UAVCAN firmware update server and dynamic node ID allocation server.
-				uavcan start fw
-
-				if param greater UAVCAN_ENABLE 2
-				then
-					set OUTPUT_MODE uavcan_esc
-				fi
+				set OUTPUT_MODE uavcan_esc
 			fi
 		else
 			tune_control play error
@@ -415,17 +409,6 @@ else
 		commander start
 	fi
 
-
-	#
-	# Play the startup tune (if not disabled or there is an error)
-	#
-	param compare CBRK_BUZZER 782090
-	if [ $? != 0 -o $STARTUP_TUNE != 1 ]
-	then
-		tune_control play -t $STARTUP_TUNE
-	fi
-
-
 	# Pre-takeoff continuous magnetometer calibration
 	if param compare -s MBE_ENABLE 1
 	then
@@ -444,7 +427,7 @@ else
 	set BOARD_RC_MAVLINK ${R}etc/init.d/rc.board_mavlink
 	if [ -f $BOARD_RC_MAVLINK ]
 	then
-		echo "Board extras: ${BOARD_RC_MAVLINK}"
+		echo "Board mavlink: ${BOARD_RC_MAVLINK}"
 		. $BOARD_RC_MAVLINK
 	fi
 	unset BOARD_RC_MAVLINK
@@ -483,6 +466,15 @@ else
 	#
 	. ${R}etc/init.d/rc.vehicle_setup
 
+	#
+	# Play the startup tune (if not disabled or there is an error)
+	#
+	param compare CBRK_BUZZER 782090
+	if [ "$?" != "0" -o "$STARTUP_TUNE" != "1" ]
+	then
+		tune_control play -t $STARTUP_TUNE
+	fi
+
 	#
 	# Start the navigator.
 	#

ROMFS/px4fmu_common/mixers/CMakeLists.txt

@@ -90,4 +90,5 @@ px4_add_romfs_files(
 	vtol_convergence.main.mix
 	vtol_delta.aux.mix
 	vtol_tailsitter_duo.main.mix
+	vtol_tailsitter_duo_sat.main.mix
 )

ROMFS/px4fmu_common/mixers/vtol_tailsitter_duo_sat.main.mix

@@ -0,0 +1,39 @@
+Tailsitter duo mixer
+============================
+
+This file defines a mixer for a generic duo tailsitter VTOL (eg TBS Caipirinha tailsitter edition). This vehicle
+has two motors in total, one attached to each wing. It also has two elevons which
+are located in the slipstream of the propellers. This mixer generates 4 PWM outputs
+on the main PWM ouput port, two at 400Hz for the motors, and two at 50Hz for the
+elevon servos. Channels 1-4 are configured to run at 400Hz, while channels 5-8 run
+at the default rate of 50Hz. Note that channels 3 and 4 are assigned but not used.
+
+Motor mixer
+------------
+Channel 1 connects to the right (starboard) motor.
+Channel 2 connects to the left (port) motor.
+
+R: 2-
+
+Zero mixer (2x)
+---------------
+Channels 3,4 are unused.
+
+Z:
+
+Z:
+
+Elevons mixer
+--------------
+Channel 5 connects to the right (starboard) elevon.
+Channel 6 connects to the left (port) elevon.
+Here we saturate the elevons before their full range
+to avoid roll-pitch-yaw coupling during faster maneuvers
+
+M: 2
+S: 1 0   10000   10000    0 -6000  6000
+S: 1 1   10000   10000    0 -6000  6000
+
+M: 2
+S: 1 0   10000   10000    0 -6000  6000
+S: 1 1  -10000  -10000    0 -6000  6000

Tools/HIL/test_airframes.sh

@@ -21,13 +21,26 @@ echo "airframes: ${ALL_AIRFRAMES}"
 for airframe in $ALL_AIRFRAMES
 do
 	echo
-	echo "##########################################################################################"
+	echo
+	echo
+	echo "########################################################################################################################"
 	echo " Airframe: $airframe"
-	echo "##########################################################################################"
+	echo "########################################################################################################################"
 	echo
 
 	${DIR}/nsh_param_set.py --device ${SERIAL_DEVICE} --name SYS_AUTOSTART  --value $airframe
 	${DIR}/nsh_param_set.py --device ${SERIAL_DEVICE} --name CBRK_BUZZER    --value 782097
+
+	# enable all mavlink instances
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_0_CONFIG 101' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_1_CONFIG 102' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_2_CONFIG 103' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_3_CONFIG 104' || true
+
+	# enable all GPS
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set GPS_1_CONFIG 201' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set GPS_1_CONFIG 202' || true
+
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param reset SYS_HITL'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param save'
@@ -35,13 +48,16 @@ do
 
 	${DIR}/reboot.py --device ${SERIAL_DEVICE}
 
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/mtd_params' || true
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/parameters_backup.bson' || true
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/param_import_fail.bson' || true
 
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'ps'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'work_queue status'
 
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'pwm info'
 
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'mavlink stop-all'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'gps stop'
+
 done

Tools/docker_run.sh

@@ -1,35 +1,5 @@
 #! /bin/bash
 
-if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	echo "guessing PX4_DOCKER_REPO based on input";
-	if [[ $@ =~ .*px4_fmu.* ]]; then
-		# nuttx-px4fmu-v{1,2,3,4,5}
-		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-09-08"
-	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
-		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default
-		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2021-08-18"
-	elif [[ $@ =~ .*pilotpi.arm64 ]]; then
-		# scumaker_pilotpi_arm64
-		PX4_DOCKER_REPO="px4io/px4-dev-aarch64:latest"
-	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*bebop.* ]]; then
-		# posix_rpi_cross, posix_bebop_default
-		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2021-08-18"
-	elif [[ $@ =~ .*clang.* ]] || [[ $@ =~ .*scan-build.* ]]; then
-		# clang tools
-		PX4_DOCKER_REPO="px4io/px4-dev-clang:2021-02-04"
-	elif [[ $@ =~ .*tests* ]]; then
-		# run all tests with simulation
-		PX4_DOCKER_REPO="px4io/px4-dev-simulation-bionic:2021-12-11"
-	fi
-else
-	echo "PX4_DOCKER_REPO is set to '$PX4_DOCKER_REPO'";
-fi
-
-# otherwise default to nuttx
-if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-09-08"
-fi
-
 # docker hygiene
 
 #Delete all stopped containers (including data-only containers)
@@ -38,30 +8,23 @@ fi
 #Delete all 'untagged/dangling' (<none>) images
 #docker rmi $(docker images -q -f dangling=true)
 
-echo "PX4_DOCKER_REPO: $PX4_DOCKER_REPO";
+if [[ -z "${DOCKER_TAG}" ]]; then
+  TAG_NAME=""
+else
+  TAG_NAME=":${DOCKER_TAG}"
+fi
+
+PX4_DOCKER_REPO="px4io/px4-dev$TAG_NAME"
+
+echo $PX4_DOCKER_REPO
 
 PWD=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
 SRC_DIR=$PWD/../
 
-CCACHE_DIR=${HOME}/.ccache
-mkdir -p "${CCACHE_DIR}"
-
 docker run -it --rm -w "${SRC_DIR}" \
-	--env=AWS_ACCESS_KEY_ID \
-	--env=AWS_SECRET_ACCESS_KEY \
-	--env=BRANCH_NAME \
-	--env=CCACHE_DIR="${CCACHE_DIR}" \
-	--env=CI \
-	--env=CODECOV_TOKEN \
-	--env=COVERALLS_REPO_TOKEN \
-	--env=LOCAL_USER_ID="$(id -u)" \
-	--env=PX4_ASAN \
-	--env=PX4_MSAN \
-	--env=PX4_TSAN \
-	--env=PX4_UBSAN \
-	--env=TRAVIS_BRANCH \
-	--env=TRAVIS_BUILD_ID \
-	--publish 14556:14556/udp \
-	--volume=${CCACHE_DIR}:${CCACHE_DIR}:rw \
-	--volume=${SRC_DIR}:${SRC_DIR}:rw \
-	${PX4_DOCKER_REPO} /bin/bash -c "$1 $2 $3"
+  --env=LOCAL_USER_ID="$(id -u)" \
+  --publish 14556:14556/udp \
+  --volume=/tmp/.X11-unix:/tmp/.X11-unix \
+  --volume=/tmp:/tmp:rw \
+  --volume=${SRC_DIR}:${SRC_DIR}:rw \
+  ${PX4_DOCKER_REPO} /bin/bash -c "$1 $2 $3"

Tools/gazebo_sitl_multiple_run.sh

@@ -39,7 +39,7 @@ function spawn_model() {
 
 	echo "Spawning ${MODEL}_${N} at ${X} ${Y}"
 
-	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.0
+	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.83
 
 	popd &>/dev/null
 

Tools/generate_board_targets_json.py

@@ -6,14 +6,14 @@ import os
 import sys
 import json
 import re
-from kconfiglib import Kconfig
+# from kconfiglib import Kconfig
 
-kconf = Kconfig()
+# kconf = Kconfig()
 
 # Supress warning output
-kconf.warn_assign_undef = False
-kconf.warn_assign_override = False
-kconf.warn_assign_redun = False
+# kconf.warn_assign_undef = False
+# kconf.warn_assign_override = False
+# kconf.warn_assign_redun = False
 
 source_dir = os.path.join(os.path.dirname(os.path.abspath(__file__)), '..')
 
@@ -23,6 +23,10 @@ parser.add_argument('-v', '--verbose', dest='verbose', action='store_true',
                     help='Verbose Output')
 parser.add_argument('-p', '--pretty', dest='pretty', action='store_true',
                     help='Pretty output instead of a single line')
+parser.add_argument('-a', '--all_variants', dest='all_variants', action='store_true',
+                    help='Prints targets into a single all_variants_* target')
+parser.add_argument('-b', '--bloaty', dest='bloaty', action='store_true',
+                    help='Includes all bloaty targets')
 
 args = parser.parse_args()
 verbose = args.verbose
@@ -35,48 +39,66 @@ excluded_labels = [
     'nolockstep', 'replay', 'test',
     'uavcanv1' # TODO: fix and enable
     ]
+bloaty_helpers = [
+    'bloaty_compileunits',
+    'bloaty_inlines',
+    'bloaty_segments',
+    'bloaty_symbols',
+    'bloaty_templates',
+    'bloaty_ram',
+    'bloaty_compare_master',
+    ]
 
-def process_target(px4board_file, target_name):
-    ret = None
-    platform = None
-    toolchain = None
+# def process_target(px4board_file, target_name):
+    # ret = None
+    # platform = None
+    # toolchain = None
 
-    if px4board_file.endswith("default.px4board") or \
-        px4board_file.endswith("recovery.px4board") or \
-        px4board_file.endswith("bootloader.px4board"):
-        kconf.load_config(px4board_file, replace=True)
-    else: # Merge config with default.px4board
-        default_kconfig = re.sub(r'[a-zA-Z\d_]+\.px4board', 'default.px4board', px4board_file)
-        kconf.load_config(default_kconfig, replace=True)
-        kconf.load_config(px4board_file, replace=False)
+    # if px4board_file.endswith("default.px4board") or \
+        # px4board_file.endswith("recovery.px4board") or \
+        # px4board_file.endswith("bootloader.px4board"):
+        # kconf.load_config(px4board_file, replace=True)
+    # else: # Merge config with default.px4board
+        # default_kconfig = re.sub(r'[a-zA-Z\d_]+\.px4board', 'default.px4board', px4board_file)
+        # kconf.load_config(default_kconfig, replace=True)
+        # kconf.load_config(px4board_file, replace=False)
 
-    if "BOARD_TOOLCHAIN" in kconf.syms:
-        toolchain = kconf.syms["BOARD_TOOLCHAIN"].str_value
+    # if "BOARD_TOOLCHAIN" in kconf.syms:
+        # toolchain = kconf.syms["BOARD_TOOLCHAIN"].str_value
 
-    if "BOARD_PLATFORM" in kconf.syms:
-        platform = kconf.syms["BOARD_PLATFORM"].str_value
+    # if "BOARD_PLATFORM" in kconf.syms:
+        # platform = kconf.syms["BOARD_PLATFORM"].str_value
 
-    assert platform, f"PLATFORM not found in {px4board_file}"
+    # assert platform, f"PLATFORM not found in {px4board_file}"
 
-    if platform not in excluded_platforms:
-        # get the container based on the platform and toolchain
-        container = platform
-        if platform == 'posix':
-            container = 'base-focal'
-            if toolchain:
-                if toolchain.startswith('aarch64'):
-                    container = 'aarch64'
-                elif toolchain == 'arm-linux-gnueabihf':
-                    container = 'armhf'
-                else:
-                    if verbose: print(f'possibly unmatched toolchain: {toolchain}')
-        elif platform == 'nuttx':
-            container = 'nuttx-focal'
+    # if platform not in excluded_platforms:
+        # # get the container based on the platform and toolchain
+        # container = platform
+        # if platform == 'posix':
+            # container = 'base-focal'
+            # if toolchain:
+                # if toolchain.startswith('aarch64'):
+                    # container = 'aarch64'
+                # elif toolchain == 'arm-linux-gnueabihf':
+                    # container = 'armhf'
+                # else:
+                    # if verbose: print(f'possibly unmatched toolchain: {toolchain}')
+        # elif platform == 'nuttx':
+            # container = 'nuttx-focal'
 
-        ret = {'target': target_name, 'container': container}
+        # ret = {'target': target_name, 'container': container}
 
-    return ret
+    # return ret
 
+def process_bloaty(target_path, target_name):
+    response = []
+    for bloat in bloaty_helpers:
+        bloaty_name = target_name + ' ' + bloat + ' || true'
+        processed_target = process_target(target_path, bloaty_name)
+        response.append(processed_target)
+    return response
+
+# Look up boards from each manufacturer
 for manufacturer in os.scandir(os.path.join(source_dir, 'boards')):
     if not manufacturer.is_dir():
         continue
@@ -85,18 +107,37 @@ for manufacturer in os.scandir(os.path.join(source_dir, 'boards')):
         continue
 
     for board in os.scandir(manufacturer.path):
+        # Only boards are directories don't proceed if otherwise
         if not board.is_dir():
             continue
-        for files in os.scandir(board.path):
-            if files.is_file() and files.name.endswith('.px4board'):
-                label = files.name[:-9]
-                target_name = manufacturer.name + '_' + board.name + '_' + label
-                if label in excluded_labels:
-                    if verbose: print(f'excluding label {label} ({target_name})')
-                    continue
-                target = process_target(files.path, target_name)
-                if target is not None:
-                    build_configs.append(target)
+
+        if args.all_variants:
+            # The all_variants target makes all targets for a board
+            target_name = 'all_variants_' + manufacturer.name + '_' + board.name
+            default_target_path = f'{board.path}/default.px4board'
+            # target = process_target(default_target_path, target_name)
+            target = {'target': target_name}
+            if target is not None:
+                build_configs.append(target)
+            if args.bloaty and target is not None:
+                # bloaty targets
+                bloat_target_name = manufacturer.name + '_' + board.name
+                # bloaty_targets = process_bloaty(default_target_path, bloat_target_name)
+                bloaty_targets = {'target': bloat_target_name}
+                build_configs += bloaty_targets
+        else:
+            # Each board can have multiple variant targets
+            for files in os.scandir(board.path):
+                if files.is_file() and files.name.endswith('.px4board'):
+                    label = files.name[:-9]
+                    target_name = manufacturer.name + '_' + board.name + '_' + label
+                    if label in excluded_labels:
+                        if verbose: print(f'excluding label {label} ({target_name})')
+                        continue
+                    # target = process_target(files.path, target_name)
+                    target = {'target': target_name}
+                    if target is not None:
+                        build_configs.append(target)
 
 
 github_action_config = { 'include': build_configs }

Tools/jmavsim_run.sh

@@ -10,7 +10,7 @@ extra_args=
 baudrate=921600
 device=
 ip="127.0.0.1"
-while getopts ":b:d:p:qsr:f:i:loa" opt; do
+while getopts ":b:d:p:qsr:f:i:loat" opt; do
 	case $opt in
 		b)
 			baudrate=$OPTARG
@@ -40,7 +40,10 @@ while getopts ":b:d:p:qsr:f:i:loa" opt; do
 			extra_args="$extra_args -disponly"
 			;;
 		a)
-			extra_args="$extra_args -fw" # aircraft
+			extra_args="$extra_args -fw" # aircraft model
+			;;
+		t)
+			extra_args="$extra_args -ts" # tailsitter model
 			;;
 		\?)
 			echo "Invalid option: -$OPTARG" >&2

Tools/kconfig/cmake_kconfig_lut.txt

@@ -156,7 +156,6 @@ bl_update,CONFIG_SYSTEMCMDS_BL_UPDATE=y
 dmesg,CONFIG_SYSTEMCMDS_DMESG=y
 dumpfile,CONFIG_SYSTEMCMDS_DUMPFILE=y
 dyn,CONFIG_SYSTEMCMDS_DYN=y
-esc_calib,CONFIG_SYSTEMCMDS_ESC_CALIB=y
 failure,CONFIG_SYSTEMCMDS_FAILURE=y
 gpio,CONFIG_SYSTEMCMDS_GPIO=y
 hardfault_log,CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
@@ -165,7 +164,6 @@ led_control,CONFIG_SYSTEMCMDS_LED_CONTROL=y
 mft,CONFIG_SYSTEMCMDS_MFT=y
 microbench,CONFIG_SYSTEMCMDS_MICROBENCH=y
 mixer,CONFIG_SYSTEMCMDS_MIXER=y
-motor_ramp,CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 motor_test,CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 mtd,CONFIG_SYSTEMCMDS_MTD=y
 netman,CONFIG_SYSTEMCMDS_NETMAN=y

Tools/module_config/generate_actuators_metadata.py

@@ -142,7 +142,6 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
         }
     if 'show_subgroups_if' in actuator_output_yaml:
         actuator_output['show-subgroups-if'] = actuator_output_yaml['show_subgroups_if']
-    add_reverse_range_param = actuator_output_yaml.get('add_reverse_range_param', False)
 
     # config parameters
     def get_config_params(param_list):
@@ -257,14 +256,13 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
                 per_channel_params.append(param)
 
 
-        if add_reverse_range_param:
-            param = {
-                    'label': 'Rev Range\n(for Servos)',
-                    'name': param_prefix+'_REV',
-                    'index-offset': -1,
-                    'show-as': 'bitset',
-                }
-            per_channel_params.append(param)
+        param = {
+                'label': 'Rev Range\n(for Servos)',
+                'name': param_prefix+'_REV',
+                'index-offset': -1,
+                'show-as': 'bitset',
+            }
+        per_channel_params.append(param)
 
         # TODO: support non-standard per-channel parameters
 

Tools/module_config/generate_params.py

@@ -178,7 +178,6 @@ def get_actuator_output_params(yaml_config, output_functions,
     all_params = {}
     group_idx = 0
 
-    add_reverse_range_param = yaml_config['actuator_output'].get('add_reverse_range_param', False)
     all_param_prefixes = {}
 
     def add_local_param(param_name, param_def):
@@ -299,13 +298,9 @@ Note that non-motor outputs might already be active in prearm state if COM_PREAR
 '''
         minimum_description = \
 '''Minimum output value (when not disarmed).
-
-The output range can be reversed by setting Min > Max.
 '''
         maximum_description = \
 '''Maxmimum output value (when not disarmed).
-
-The output range can be reversed by setting Min > Max.
 '''
         failsafe_description = \
 '''This is the output value that is set when in failsafe mode.
@@ -346,29 +341,29 @@ When set to -1 (default), the value depends on the function (see {:}).
                     }
                 add_local_param(param_prefix+'_'+param_suffix+'${i}', param)
 
-    if add_reverse_range_param:
-        for param_prefix in all_param_prefixes:
-            groups = all_param_prefixes[param_prefix]
-            # collect the bits
-            channel_bits = {}
-            for instance_start, instance_start_label, num_instances, label in groups:
-                for instance in range(instance_start, instance_start+num_instances):
-                    instance_label = instance - instance_start + instance_start_label
-                    channel_bits[instance-1] = label + ' ' + str(instance_label)
+    # add reverse range param
+    for param_prefix in all_param_prefixes:
+        groups = all_param_prefixes[param_prefix]
+        # collect the bits
+        channel_bits = {}
+        for instance_start, instance_start_label, num_instances, label in groups:
+            for instance in range(instance_start, instance_start+num_instances):
+                instance_label = instance - instance_start + instance_start_label
+                channel_bits[instance-1] = label + ' ' + str(instance_label)
 
-            param = {
-                'description': {
-                    'short': 'Reverse Output Range for '+module_name,
-                    'long':
+        param = {
+            'description': {
+                'short': 'Reverse Output Range for '+module_name,
+                'long':
 '''Allows to reverse the output range for each channel.
 Note: this is only useful for servos.
 '''.format(channel_label),
-                    },
-                'type': 'bitmask',
-                'default': 0,
-                'bit': channel_bits
-                }
-            add_local_param(param_prefix+'_REV', param)
+                },
+            'type': 'bitmask',
+            'default': 0,
+            'bit': channel_bits
+            }
+        add_local_param(param_prefix+'_REV', param)
 
     if verbose: print('adding actuator params: {:}'.format(all_params))
     return all_params

Tools/setup/Dockerfile

@@ -0,0 +1,55 @@
+#
+# PX4 base development environment
+#
+
+FROM ubuntu:20.04
+LABEL maintainer="Daniel Agar <daniel@agar.ca>, Ramon Roche <mrpollo@gmail.com>"
+
+ENV DEBIAN_FRONTEND noninteractive
+ENV LANG C.UTF-8
+ENV LC_ALL C.UTF-8
+
+# Installing required utilities
+RUN apt-get update && apt-get -y --quiet --no-install-recommends install \
+  ca-certificates \
+  gnupg \
+  lsb-core \
+  lsb-release \
+  sudo \
+  software-properties-common \
+  wget \
+  gosu \
+  ;
+
+# Install PX4 Requirements
+COPY Tools/setup/requirements.txt /tmp/requirements.txt
+COPY Tools/setup/ubuntu.sh /tmp/ubuntu.sh
+# We support pre-downloading the gcc arm none eabi compiler
+# to speed up build times, if the file is not present when
+# building, the ubuntu.sh script will download it from source
+COPY *gcc-arm-none-eabi-9-2020-q2-update-linux.tar.bz2 /tmp/gcc-arm-none-eabi-9-2020-q2-update-linux.tar.bz2
+# The PATH env is set within ubuntu.sh, but given how we
+# are running the image using `gosu` to avoid read-only problems
+# with the filesystem the env variable does not persist
+ENV PATH="/opt/gcc-arm-none-eabi-9-2020-q2-update/bin:$PATH"
+ENV PATH="/opt/jdk-14.0.2+12/bin:$PATH"
+RUN bash /tmp/ubuntu.sh --from-docker --with-java --with-rtps --no-sim-tools
+
+ENV DISPLAY :99
+
+ENV FASTRTPSGEN_DIR="/usr/local/bin/"
+ENV TERM=xterm
+ENV TZ=UTC
+
+# SITL UDP PORTS
+EXPOSE 14556/udp
+EXPOSE 14557/udp
+
+# create user with id 1001 (jenkins docker workflow default)
+RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
+
+# create and start as LOCAL_USER_ID
+COPY Tools/setup/docker-entrypoint.sh /usr/local/bin/entrypoint.sh
+ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
+
+CMD ["/bin/bash"]

Tools/setup/arch.sh

@@ -48,7 +48,6 @@ echo "Installing PX4 general dependencies"
 sudo pacman -Sy --noconfirm --needed \
 	astyle \
 	base-devel \
-	ccache \
 	clang \
 	cmake \
 	cppcheck \

Tools/setup/docker-entrypoint.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# Start virtual X server in the background
+# - DISPLAY default is :99, set in dockerfile
+# - Users can override with `-e DISPLAY=` in `docker run` command to avoid
+#   running Xvfb and attach their screen
+if [[ -x "$(command -v Xvfb)" && "$DISPLAY" == ":99" ]]; then
+	echo "Starting Xvfb"
+	Xvfb :99 -screen 0 1600x1200x24+32 &
+fi
+
+# Check if the ROS_DISTRO is passed and use it
+# to source the ROS environment
+if [ -n "${ROS_DISTRO}" ]; then
+	source "/opt/ros/$ROS_DISTRO/setup.bash"
+fi
+
+# Use the LOCAL_USER_ID if passed in at runtime
+if [ -n "${LOCAL_USER_ID}" ]; then
+	echo "Starting with UID : $LOCAL_USER_ID"
+	# modify existing user's id
+	usermod -u $LOCAL_USER_ID user
+
+	# run as user
+  exec gosu user "$@"
+else
+	exec "$@"
+fi

Tools/setup/ubuntu.sh

@@ -2,20 +2,22 @@
 
 set -e
 
-## Bash script to setup PX4 development environment on Ubuntu LTS (20.04, 18.04, 16.04).
+## Bash script to setup PX4 development environment on Ubuntu LTS (20.04, 18.04).
 ## Can also be used in docker.
 ##
 ## Installs:
-## - Common dependencies and tools for nuttx, jMAVSim, Gazebo
+## - Common dependencies and tools for NuttX, jMAVSim, Gazebo
 ## - NuttX toolchain (omit with arg: --no-nuttx)
-## - jMAVSim and Gazebo9 simulator (omit with arg: --no-sim-tools)
-##
-## Not Installs:
-## - FastRTPS and FastCDR
+## - jMAVSim and Gazebo simulator (omit with arg: --no-sim-tools)
+## Optional:
+## - FastRTPS and FastCDR (with args: --with-rtps)
 
 INSTALL_NUTTX="true"
 INSTALL_SIM="true"
 INSTALL_ARCH=`uname -m`
+INSTALL_RTPS="false"
+INSTALL_JAVA="false"
+INSIDE_DOCKER="false"
 
 # Parse arguments
 for arg in "$@"
@@ -28,19 +30,19 @@ do
 		INSTALL_SIM="false"
 	fi
 
-done
+	if [[ $arg == "--with-rtps" ]]; then
+		INSTALL_RTPS="true"
+	fi
 
-# detect if running in docker
-if [ -f /.dockerenv ]; then
-	echo "Running within docker, installing initial dependencies";
-	apt-get --quiet -y update && DEBIAN_FRONTEND=noninteractive apt-get --quiet -y install \
-		ca-certificates \
-		gnupg \
-		lsb-core \
-		sudo \
-		wget \
-		;
-fi
+	if [[ $arg == "--with-java" ]]; then
+		INSTALL_JAVA="true"
+	fi
+
+	if [[ $arg == "--from-docker" ]]; then
+		INSIDE_DOCKER="true"
+	fi
+
+done
 
 # script directory
 DIR=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
@@ -69,95 +71,119 @@ elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
 fi
 
+VERBOSE_BAR="####################"
+echo
+echo $VERBOSE_BAR
+echo "#⚡️ Starting PX4 Dependency Installer for Ubuntu ${UBUNTU_RELEASE} (${INSTALL_ARCH})"
+echo "# Options:
+#
+#  - Install NuttX = ${INSTALL_NUTTX}
+#  - Install Java = ${INSTALL_JAVA}
+#  - Install Simulation = ${INSTALL_SIM}
+#  - Install RTPS = ${INSTALL_RTPS}"
+echo $VERBOSE_BAR
+echo
 
 echo
-echo "Installing PX4 general dependencies"
+echo $VERBOSE_BAR
+echo "🍻 Installing System Dependencies"
+echo $VERBOSE_BAR
+echo
 
 sudo apt-get update -y --quiet
 sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-	astyle \
 	build-essential \
-	ccache \
-	cmake \
-	cppcheck \
-	file \
-	g++ \
-	gcc \
-	gdb \
-	git \
-	lcov \
-	libxml2-dev \
-	libxml2-utils \
-	make \
-	ninja-build \
-	python3 \
-	python3-dev \
-	python3-pip \
-	python3-setuptools \
-	python3-wheel \
-	rsync \
-	shellcheck \
-	unzip \
-	zip \
-	;
+  g++ \
+  gcc \
+  gdb \
+  astyle \
+  cmake \
+  cppcheck \
+  file \
+  git \
+  lcov \
+  libxml2-dev \
+  libxml2-utils \
+  make \
+  ninja-build \
+  python3 \
+  python3-dev \
+  python3-pip \
+  python3-setuptools \
+  python3-wheel \
+  rsync \
+  shellcheck \
+  unzip \
+  zip \
+  libssl-dev \
+  ;
 
-if [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
-	echo "Installing Ubuntu 16.04 PX4-compatible ccache version"
-	wget -O /tmp/ccache_3.4.1-1_amd64.deb http://launchpadlibrarian.net/356662933/ccache_3.4.1-1_amd64.deb
-	sudo dpkg -i /tmp/ccache_3.4.1-1_amd64.deb
-fi
-
-# Python3 dependencies
+# Python 3 dependencies
 echo
-echo "Installing PX4 Python3 dependencies"
+echo $VERBOSE_BAR
+echo "🍻 Installing Python dependencies"
+echo $VERBOSE_BAR
+echo
+
 if [ -n "$VIRTUAL_ENV" ]; then
 	# virtual envrionments don't allow --user option
-	python -m pip install -r ${DIR}/requirements.txt
+  python -m pip install -r ${DIR}/requirements.txt
 else
 	# older versions of Ubuntu require --user option
-	python3 -m pip install --user -r ${DIR}/requirements.txt
+  if [[ $INSIDE_DOCKER == "true" ]]; then
+    # when running inside a docker container we don't need to install
+    # under --user since the installer user is root
+    # its best to install packages globaly for any user to find
+    python3 -m pip install -r /tmp/requirements.txt
+  else
+    python3 -m pip install --user -r ${DIR}/requirements.txt
+  fi
 fi
 
 # NuttX toolchain (arm-none-eabi-gcc)
 if [[ $INSTALL_NUTTX == "true" ]]; then
 
 	echo
-	echo "Installing NuttX dependencies"
+  echo $VERBOSE_BAR
+	echo "🍻 Installing NuttX dependencies"
+  echo $VERBOSE_BAR
+	echo
 
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		automake \
-		binutils-dev \
-		bison \
-		build-essential \
-		flex \
-		g++-multilib \
-		gcc-multilib \
-		gdb-multiarch \
-		genromfs \
-		gettext \
-		gperf \
-		libelf-dev \
-		libexpat-dev \
-		libgmp-dev \
-		libisl-dev \
-		libmpc-dev \
-		libmpfr-dev \
-		libncurses5 \
-		libncurses5-dev \
-		libncursesw5-dev \
-		libtool \
-		pkg-config \
-		screen \
-		texinfo \
-		u-boot-tools \
-		util-linux \
-		vim-common \
-		;
-	if [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		kconfig-frontends \
-		;
-	fi
+    automake \
+    binutils-dev \
+    bison \
+    flex \
+    genromfs \
+    gettext \
+    gperf \
+    libelf-dev \
+    libexpat-dev \
+    libgmp-dev \
+    libisl-dev \
+    libmpc-dev \
+    libmpfr-dev \
+    libncurses5 \
+    libncurses5-dev \
+    libncursesw5-dev \
+    libtool \
+    pkg-config \
+    screen \
+    texinfo \
+    u-boot-tools \
+    util-linux \
+    vim-common \
+    g++-arm-linux-gnueabihf \
+    gcc-arm-linux-gnueabihf \
+    g++-aarch64-linux-gnu \
+    gcc-aarch64-linux-gnu \
+    ;
+
+  if [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
+    sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+    kconfig-frontends \
+    ;
+  fi
 
 
 	if [ -n "$USER" ]; then
@@ -165,97 +191,186 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		sudo usermod -a -G dialout $USER
 	fi
 
-	# arm-none-eabi-gcc
-	NUTTX_GCC_VERSION="9-2020-q2-update"
-	NUTTX_GCC_VERSION_SHORT="9-2020q2"
+  NUTTX_GCC_VERSION="9-2020-q2-update"
+  NUTTX_GCC_VERSION_SHORT="9-2020q2"
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Verifying proper gcc version (${NUTTX_GCC_VERSION}), and installing if not found"
+  echo
 
-	source $HOME/.profile # load changed path for the case the script is reran before relogin
+  source $HOME/.profile # load changed path for the case the script is reran before relogin
 	if [ $(which arm-none-eabi-gcc) ]; then
-		GCC_VER_STR=$(arm-none-eabi-gcc --version)
-		GCC_FOUND_VER=$(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}")
-	fi
+    GCC_VER_STR=$(arm-none-eabi-gcc --version)
+    GCC_VER_FOUND=$(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}")
+  fi
 
-	if [[ "$GCC_FOUND_VER" == "1" ]]; then
-		echo "arm-none-eabi-gcc-${NUTTX_GCC_VERSION} found, skipping installation"
+  if [[ $(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}") == "1" ]]; then
+    echo "📌 Skipping installation, the arm cross compiler was found"
+    echo $VERBOSE_BAR
+	  echo
 
-	else
-		echo "Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
-		wget -O /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-${INSTALL_ARCH}-linux.tar.bz2 && \
-			sudo tar -jxf /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 -C /opt/;
+  else
+    echo "📌 The arm cross compiler was not found";
+    echo " * Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
+    # The arm cross compiler hosting provider is known to throttle download speeds
+    # for users who reach a certain limit of downloads in a given time frame
+    # for this reason we allow for using a previously downloaded file
+    # this is specially helpful when debugging this installer script
+    # from within a container COMPILER_PATH="/tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2"
+    COMPILER_NAME="gcc-arm-none-eabi-${NUTTX_GCC_VERSION}"
+    COMPILER_PATH="/tmp/$COMPILER_NAME-linux.tar.bz2"
+    if [ ! -f "$COMPILER_PATH" ]; then
+      wget -O $COMPILER_PATH https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/${COMPILER_NAME}-${INSTALL_ARCH}-linux.tar.bz2
+    fi
+    sudo tar -jxf $COMPILER_PATH -C /opt/;
 
-		# add arm-none-eabi-gcc to user's PATH
-		exportline="export PATH=/opt/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}/bin:\$PATH"
+    # add arm-none-eabi-gcc to user's PATH
+    exportline="export PATH=\"/opt/${COMPILER_NAME}/bin:\$PATH\""
+    if [[ $INSIDE_DOCKER == "true" ]]; then
+      # when running on a docker container its best to set the environment globally
+      # since we don't know which user is going to be running commands on the container
+      touch /etc/profile.d/px4env.sh
+      echo $exportline >> /etc/profile.d/px4env.sh
+    else
+      if grep -Fxq "$exportline" $HOME/.profile; then
+        echo "${NUTTX_GCC_VERSION} path already set.";
+      else
+        echo $exportline >> $HOME/.profile;
+      fi
+    fi
+    echo " * arm-none-eabi-gcc (${NUTTX_GCC_VERSION}) Installed Succesful to /opt/${COMPILER_NAME}/bin"
+    echo $VERBOSE_BAR
+	  echo
+  fi
+fi
+
+# Install JAVA
+if [[ $INSTALL_JAVA == "true" ]]; then
+  JDK_VERSION="14.0.2_12"
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Installing Java JDK
+
+  * Version: $JDK_VERSION
+  * Path: /opt/jdk-14.0.2+12"
+  echo $VERBOSE_BAR
+  echo
+
+  JDK_DOWNLOAD="/tmp/OpenJDK14U-jdk_x64_linux_hotspot_$JDK_VERSION.tar.gz"
+  wget -O $JDK_DOWNLOAD https://github.com/AdoptOpenJDK/openjdk14-binaries/releases/download/jdk-14.0.2%2B12/OpenJDK14U-jdk_x64_linux_hotspot_14.0.2_12.tar.gz
+  sudo tar -xzf $JDK_DOWNLOAD -C /opt/
+  export PATH="/opt/jdk-14.0.2+12/bin:$PATH"
+fi
+
+# Fast-RTPS
+if [[ $INSTALL_RTPS == "true" ]]; then
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Installing Fast-RTPS"
+  echo $VERBOSE_BAR
+  echo
+
+  GRADLE_VERSION="6.4.1"
+  wget -O "/tmp/gradle-$GRADLE_VERSION-bin.zip" "https://services.gradle.org/distributions/gradle-$GRADLE_VERSION-bin.zip" \
+    && unzip -d /opt/gradle "/tmp/gradle-$GRADLE_VERSION-bin.zip"
+  export PATH="$PATH:/opt/gradle/gradle-$GRADLE_VERSION/bin"
+
+  # Intall foonathan_memory from source as it is required to Fast-RTPS >= 1.9
+  git clone https://github.com/eProsima/foonathan_memory_vendor.git /tmp/foonathan_memory \
+    && cd /tmp/foonathan_memory \
+    && mkdir build && cd build \
+    && cmake .. \
+    && cmake --build . --target install -- -j $(nproc)
+
+  # Fast-DDS (Fast-RTPS 2.1.1)
+  git clone --recursive https://github.com/eProsima/Fast-DDS.git -b v2.1.1 /tmp/FastRTPS-2.1.1 \
+    && cd /tmp/FastRTPS-2.1.1 \
+    && mkdir build && cd build \
+    && cmake -DTHIRDPARTY=ON -DSECURITY=ON .. \
+    && cmake --build . --target install -- -j $(nproc)
+
+  # Fast-RTPS-Gen 1.0.4
+  git clone --recursive https://github.com/eProsima/Fast-DDS-Gen.git -b v1.0.4 /tmp/Fast-RTPS-Gen-1.0.4 \
+    && cd /tmp/Fast-RTPS-Gen-1.0.4 \
+    && gradle assemble \
+    && gradle install
 
-		if grep -Fxq "$exportline" $HOME/.profile; then
-			echo "${NUTTX_GCC_VERSION} path already set.";
-		else
-			echo $exportline >> $HOME/.profile;
-		fi
-	fi
 fi
 
 # Simulation tools
 if [[ $INSTALL_SIM == "true" ]]; then
 
-	echo
-	echo "Installing PX4 simulation dependencies"
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Installing PX4 Simulation Tools"
+  echo
 
-	# General simulation dependencies
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		bc \
-		;
+  if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+    gazebo_version=9
+  elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
+    gazebo_version=11
+  fi
 
-	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		java_version=11
-		gazebo_version=9
-	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-		java_version=13
-		gazebo_version=11
-	else
-		java_version=14
-		gazebo_version=11
-	fi
-	# Java (jmavsim or fastrtps)
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		ant \
-		openjdk-$java_version-jre \
-		openjdk-$java_version-jdk \
-		libvecmath-java \
-		;
+  echo "  * Gazebo Version $gazebo_version"
+  echo $VERBOSE_BAR
 
-	# Set Java 11 as default
-	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
+  # General simulation dependencies
+  sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+    bc \
+    ant \
+    libvecmath-java \
+    ;
 
-	# Gazebo
-	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
-	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
-	# Update list, since new gazebo-stable.list has been added
-	sudo apt-get update -y --quiet
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		dmidecode \
-		gazebo$gazebo_version \
-		gstreamer1.0-plugins-bad \
-		gstreamer1.0-plugins-base \
-		gstreamer1.0-plugins-good \
-		gstreamer1.0-plugins-ugly \
-		gstreamer1.0-libav \
-		libeigen3-dev \
-		libgazebo$gazebo_version-dev \
-		libgstreamer-plugins-base1.0-dev \
-		libimage-exiftool-perl \
-		libopencv-dev \
-		libxml2-utils \
-		pkg-config \
-		protobuf-compiler \
-		;
+  # Installing Gazebo and dependencies
+  # Setup OSRF Gazebo repository
+  sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
+  wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
+  # Update list, since new gazebo-stable.list has been added
+  sudo apt-get update -y --quiet
+  sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+    dmidecode \
+    gazebo$gazebo_version \
+    gstreamer1.0-plugins-bad \
+    gstreamer1.0-plugins-base \
+    gstreamer1.0-plugins-good \
+    gstreamer1.0-plugins-ugly \
+    gstreamer1.0-libav \
+    libeigen3-dev \
+    libgazebo$gazebo_version-dev \
+    libgstreamer-plugins-base1.0-dev \
+    libimage-exiftool-perl \
+    libopencv-dev \
+    libxml2-utils \
+    pkg-config \
+    protobuf-compiler \
+    ;
 
-	if sudo dmidecode -t system | grep -q "Manufacturer: VMware, Inc." ; then
-		# fix VMWare 3D graphics acceleration for gazebo
-		echo "export SVGA_VGPU10=0" >> ~/.profile
-	fi
+  if sudo dmidecode -t system | grep -q "Manufacturer: VMware, Inc." ; then
+    # fix VMWare 3D graphics acceleration for gazebo
+    echo "export SVGA_VGPU10=0" >> ~/.profile
+  fi
 fi
 
-if [[ $INSTALL_NUTTX == "true" ]]; then
-	echo
-	echo "Relogin or reboot computer before attempting to build NuttX targets"
+if [[ $INSIDE_DOCKER == "true" ]]; then
+  # cleanup installation
+  rm -rf /tmp/
 fi
+
+if [[ $INSIDE_DOCKER == "false" ]] && [[ $INSTALL_NUTTX == "true" ]]; then
+  echo
+  echo $VERBOSE_BAR
+  echo "💡 We recommend you relogin/reboot before attempting to build NuttX targets"
+  echo $VERBOSE_BAR
+  echo
+fi
+
+echo
+echo
+echo $VERBOSE_BAR
+echo "#⚡️ PX4 Dependency Installer Ended Succesfully
+#
+#  For more information on PX4 Autopilot check out our docs
+#  at docs.px4.io, if you find a bug please file an issue
+#  on GitHub https://github.com/px4/px4-autopilot"
+echo $VERBOSE_BAR
+echo

Tools/uorb_graph/create.py

@@ -56,6 +56,21 @@ def get_N_colors(N, s=0.8, v=0.9):
         hex_out.append("#"+"".join(map(lambda x: format(x, '02x'), rgb)))
     return hex_out
 
+def topic_filename(topic):
+    MSG_PATH = 'msg/'
+
+    file_list = os.listdir(MSG_PATH)
+    msg_files = [file.replace('.msg', '') for file in file_list if file.endswith(".msg")]
+
+    if topic in msg_files:
+        return topic
+    else:
+        for msg_file in msg_files:
+            with open(f'{MSG_PATH}/{msg_file}.msg') as f:
+                ret = re.findall(f'^# TOPICS.*{topic}.*',f.read(),re.MULTILINE)
+                if len(ret) > 0:
+                    return msg_file
+    return "no_file"
 
 class PubSub(object):
     """ Collects either publication or subscription information for nodes
@@ -679,8 +694,7 @@ class OutputJSON(object):
             node['type'] = 'topic'
             node['color'] = topic_colors[topic]
             # url is opened when double-clicking on the node
-            # TODO: does not work for multi-topics
-            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic+'.msg'
+            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic_filename(topic)+'.msg'
             nodes.append(node)
 
         data['nodes'] = nodes

boards/airmind/mindpx-v2/default.px4board

@@ -79,14 +79,12 @@ CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y

boards/airmind/mindpx-v2/init/rc.board_defaults

@@ -0,0 +1,7 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default BAT1_V_DIV 10.177939394
+param set-default BAT1_A_PER_V 15.391030303

boards/airmind/mindpx-v2/src/board_config.h

@@ -72,12 +72,6 @@
 #define ADC_RC_RSSI_CHANNEL		11
 #define ADC_AIRSPEED_VOLTAGE_CHANNEL	15
 
-/* Define Battery 1 Voltage Divider and A per V
- */
-
-#define BOARD_BATTERY1_V_DIV   (10.177939394f)
-#define BOARD_BATTERY1_A_PER_V (15.391030303f)
-
 /* Power supply control and monitoring GPIOs */
 // #define GPIO_VDD_5V_PERIPH_EN	(GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN8)
 // #define GPIO_VDD_BRICK_VALID	(GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN5)

boards/ark/can-flow/src/CMakeLists.txt

@@ -61,6 +61,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/ark/can-gps/src/CMakeLists.txt

@@ -63,6 +63,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/ark/can-rtk-gps/init/rc.board_defaults

@@ -4,6 +4,7 @@
 #------------------------------------------------------------------------------
 
 param set-default CBRK_IO_SAFETY 0
+param set-default CANNODE_GPS_RTCM 1
 
 safety_button start
 tone_alarm start

boards/ark/can-rtk-gps/src/CMakeLists.txt

@@ -63,6 +63,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/atl/mantis-edu/cmake/upload.cmake

@@ -0,0 +1,46 @@
+############################################################################
+#
+#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+
+set(PX4_FW_NAME ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}.px4)
+
+# The file needs to have that name in order to be updated automatically.
+set(UPLOAD_NAME autopilot.px4)
+
+add_custom_target(upload_wifi
+	COMMAND ${CMAKE_COMMAND} -E copy ${PX4_FW_NAME} ${UPLOAD_NAME}
+	COMMAND ${PX4_SOURCE_DIR}/boards/atl/mantis-edu/upload.sh ${UPLOAD_NAME}
+	DEPENDS ${PX4_FW_NAME}
+	COMMENT "uploading autopilot.px4 file"
+	USES_TERMINAL
+)

boards/atl/mantis-edu/default.px4board

@@ -4,6 +4,8 @@ CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
+CONFIG_DRIVERS_BAROMETER_MAIERTEK_MPC2520=y
+CONFIG_DRIVERS_TAP_ESC=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
@@ -37,7 +39,6 @@ CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y

boards/atl/mantis-edu/init/rc.board_defaults

@@ -5,6 +5,8 @@
 
 param set-default SYS_AUTOSTART 4061
 
+param set-default BAT1_V_DIV 9.0
+
 param set-default COM_ARM_SDCARD 0
 
 param set-default SENS_EXT_I2C_PRB 0
@@ -16,7 +18,7 @@ param set-default SENS_MAG_MODE 0
 
 param set-default EV_TSK_STAT_DIS 1
 
-set LOGGER_ARGS "-m mavlink"
+param set-default SYS_DM_BACKEND 1
 
-# Start esc
-tap_esc start -d /dev/ttyS4 -n 4
+# Use MAVLink log streaming
+set LOGGER_ARGS "-m mavlink -c 0.5"

boards/atl/mantis-edu/init/rc.board_extras

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+tap_esc start -d /dev/ttyS4 -n 4
+sleep 1
+mixer load /dev/tap_esc /etc/mixers/quad_x.main.mix

boards/atl/mantis-edu/nuttx-config/nsh/defconfig

@@ -204,7 +204,7 @@ CONFIG_TASK_NAME_SIZE=24
 CONFIG_UART4_BAUD=57600
 CONFIG_UART4_RXBUFSIZE=600
 CONFIG_UART4_RXDMA=y
-CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART4_TXBUFSIZE=3000
 CONFIG_UART7_BAUD=57600
 CONFIG_UART7_RXBUFSIZE=600
 CONFIG_UART7_TXBUFSIZE=1500

boards/atl/mantis-edu/nuttx-config/scripts/script.ld

@@ -103,7 +103,7 @@ SECTIONS
 		This signature provides the bootloader with a way to delay booting
 		*/
 		_bootdelay_signature = ABSOLUTE(.);
-		FILL(0xffecc2925d7d05c5)
+		FILL(0xb4ecc2925d7d05c5)
 		. += 8;
 		*(.main_toc)
 		*(.text .text.*)

boards/atl/mantis-edu/src/CMakeLists.txt

@@ -39,7 +39,7 @@ add_library(drivers_board
 	spi.cpp
 	timer_config.cpp
 	usb.c
-	pwr.c
+	pwr.cpp
 )
 add_dependencies(drivers_board arch_board_hw_info)
 

boards/atl/mantis-edu/src/board_config.h

@@ -59,6 +59,13 @@
 #define BOARD_ARMED_STATE_LED  LED_BLUE
 
 #define FLASH_BASED_PARAMS
+#define RAM_BASED_MISSIONS
+
+// Hacks for MAVLink RC button input
+#define ATL_MANTIS_RC_INPUT_HACKS
+
+// Hacks for MAVLink RC button input
+#define ATL_MANTIS_RC_INPUT_HACKS
 
 /*
  * ADC channels
@@ -98,9 +105,6 @@
 	 (1 << ADC_HW_REV_SENSE_CHANNEL)           | \
 	 (1 << ADC1_SPARE_1_CHANNEL))
 
-/* Define Battery 1 Voltage Divider and A per V */
-#define BOARD_BATTERY1_V_DIV         (9.0f)     /* measured with the provided PM board */
-
 /* HW has to large of R termination on ADC todo:change when HW value is chosen */
 #define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
 
@@ -147,9 +151,8 @@
 #define RC_SERIAL_PORT                     "/dev/ttyS5"
 #define RC_SERIAL_SINGLEWIRE
 
-#define BOARD_HAS_POWER_CONTROL	1
 /* power on/off */
-#define MS_PWR_BUTTON_DOWN 1500
+#define MS_PWR_BUTTON_DOWN 750
 #define KEY_AD_GPIO    (GPIO_INPUT|GPIO_PULLUP|GPIO_EXTI|GPIO_PORTC|GPIO_PIN4)
 #define POWER_ON_GPIO  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN5)
 #define POWER_OFF_GPIO (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTC|GPIO_PIN5)

boards/atl/mantis-edu/src/init.c

@@ -114,6 +114,8 @@ static void cam_pwr_on_pulse(void)
 	static bool pwr_on_flag = false;
 
 	if (pwr_on_flag == false) {
+		// This is now done in the bootloader.
+		// However, for transition we can leave it in.
 		up_mdelay(700);
 		stm32_configgpio(GPIO_CAM_PWR_ON_H);
 		up_mdelay(20);

boards/atl/mantis-edu/src/pwr.cpp

@@ -53,8 +53,7 @@
 #include <nuttx/arch.h>
 
 #include <uORB/uORB.h>
-#include <uORB/topics/led_control.h>
-#include <uORB/topics/tune_control.h>
+#include <uORB/Publication.hpp>
 
 #include <arm_arch.h>
 #include "board_config.h"

boards/atl/mantis-edu/upload.sh

@@ -0,0 +1,11 @@
+#!/usr/bin/env bash
+
+set -e
+
+PX4_BINARY_FILE="$1"
+
+echo "uploading: $PX4_BINARY_FILE"
+
+PX4_BINARY_FILE_SIZE=$(stat -c%s "$PX4_BINARY_FILE")
+curl -v -F "image=@$PX4_BINARY_FILE" -H "Expect:" -H "File-Size:$PX4_BINARY_FILE_SIZE" http://192.168.42.1/cgi-bin/upload
+

boards/av/x-v1/default.px4board

@@ -77,13 +77,11 @@ CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_NETMAN=y
 CONFIG_SYSTEMCMDS_NSHTERM=y

boards/av/x-v1/init/rc.board_defaults

@@ -5,3 +5,5 @@
 
 # system_power unavailable
 param set-default CBRK_SUPPLY_CHK 894281
+
+param set-default BAT1_V_DIV 10.13

boards/av/x-v1/src/board_config.h

@@ -88,12 +88,6 @@
 #define ADC_CHANNELS \
 	((1 << ADC_BATTERY1_VOLTAGE_CHANNEL))
 
-/* Define Battery 1 Voltage Divider and A per V
- */
-
-#define BOARD_BATTERY1_V_DIV         (10.133333333f)
-#define BOARD_BATTERY1_A_PER_V       (36.367515152f)
-
 /* HW has to large of R termination on ADC todo:change when HW value is chosen */
 
 #define BOARD_ADC_OPEN_CIRCUIT_V               (5.6f)

boards/beaglebone/blue/default.px4board

@@ -59,10 +59,8 @@ CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_VMOUNT=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_DYN=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y

boards/beaglebone/blue/init/rc.board_defaults

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default BAT1_V_DIV 11.0

boards/beaglebone/blue/src/board_config.h

@@ -42,8 +42,6 @@
 #define BOARD_OVERRIDE_UUID "BBBLUEID00000000" // must be of length 16
 #define PX4_SOC_ARCH_ID     PX4_SOC_ARCH_ID_BBBLUE
 
-#define BOARD_BATTERY1_V_DIV   (11.0f)
-
 #define BOARD_MAX_LEDS 4 // Number external of LED's this board has
 
 

boards/cuav/can-gps-v1/src/CMakeLists.txt

@@ -61,6 +61,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/cuav/nora/default.px4board

@@ -82,7 +82,6 @@ CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y

boards/cuav/x7pro/default.px4board

@@ -83,7 +83,6 @@ CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y

boards/cubepilot/cubeorange/default.px4board

@@ -78,14 +78,12 @@ CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y

boards/cubepilot/cubeorange/src/board_config.h

@@ -149,7 +149,6 @@
 #define BOARD_HAS_STATIC_MANIFEST 1
 
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5};
 
 #define BOARD_ENABLE_CONSOLE_BUFFER
 

boards/cubepilot/cubeyellow/default.px4board

@@ -80,14 +80,12 @@ CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y

boards/cubepilot/cubeyellow/src/board_config.h

@@ -144,7 +144,6 @@
 #define BOARD_HAS_STATIC_MANIFEST 1
 
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5};
 
 #define BOARD_ENABLE_CONSOLE_BUFFER
 

boards/emlid/navio2/default.px4board

@@ -61,10 +61,8 @@ CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_VMOUNT=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_DYN=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y

boards/emlid/navio2/init/rc.board_defaults

@@ -0,0 +1,8 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default BAT1_V_DIV 10.177939394
+param set-default BAT1_A_PER_V 15.391030303
+

boards/emlid/navio2/src/board_config.h

@@ -42,9 +42,6 @@
 #define BOARD_OVERRIDE_UUID "RPIID00000000000" // must be of length 16
 #define PX4_SOC_ARCH_ID     PX4_SOC_ARCH_ID_RPI
 
-#define BOARD_BATTERY1_V_DIV   (10.177939394f)
-#define BOARD_BATTERY1_A_PER_V (15.391030303f)
-
 #define BOARD_MAX_LEDS 1 // Number of external LED's this board has
 
 

boards/freefly/can-rtk-gps/init/rc.board_defaults

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default CANNODE_GPS_RTCM 1

boards/freefly/can-rtk-gps/src/CMakeLists.txt

@@ -62,6 +62,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/holybro/can-gps-v1/src/CMakeLists.txt

@@ -68,6 +68,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/holybro/durandal-v1/default.px4board

@@ -75,14 +75,12 @@ CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
-CONFIG_SYSTEMCMDS_ESC_CALIB=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y

boards/holybro/durandal-v1/init/rc.board_defaults

@@ -1,7 +1,13 @@
 #!/bin/sh
 #
-# Holybro Durandal V1 specific board defaults
+# board specific defaults
 #------------------------------------------------------------------------------
 
+param set-default BAT1_V_DIV 18.1
+param set-default BAT2_V_DIV 18.1
+
+param set-default BAT1_A_PER_V 36.367515152
+param set-default BAT2_A_PER_V 36.367515152
+
 # Enable IMU thermal control
 param set-default SENS_EN_THERMAL 1

boards/holybro/durandal-v1/src/board_config.h

@@ -140,12 +140,6 @@
 	 (1 << ADC_HW_REV_SENSE_CHANNEL)           | \
 	 (1 << ADC1_3V3_IN_CHANNEL))
 
-/* Define Battery 1 Voltage Divider and A per V
- */
-
-#define BOARD_BATTERY1_V_DIV         (18.1f)     /* measured with the provided PM board */
-#define BOARD_BATTERY1_A_PER_V       (36.367515152f)
-
 /* HW has to large of R termination on ADC todo:change when HW value is chosen */
 
 #define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
@@ -187,7 +181,6 @@
 
 #define BOARD_NUM_IO_TIMERS 4
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7, 9, 8};
 
 /* Power supply control and monitoring GPIOs */
 

boards/holybro/kakutef7/init/rc.board_defaults

@@ -3,6 +3,9 @@
 # board specific defaults
 #------------------------------------------------------------------------------
 
+param set-default BAT1_V_DIV 10.9
+param set-default BAT1_A_PER_V 17
+
 # system_power unavailable
 param set-default CBRK_SUPPLY_CHK 894281
 

boards/holybro/kakutef7/src/board_config.h

@@ -92,11 +92,6 @@
 	 (1 << ADC_BATTERY_CURRENT_CHANNEL)       | \
 	 (1 << ADC_RSSI_IN_CHANNEL))
 
-/* Define Battery 1 Voltage Divider and A per V
- */
-#define BOARD_BATTERY1_V_DIV         (10.9f)
-#define BOARD_BATTERY1_A_PER_V       (17.f)
-
 /* PWM
  */
 #define DIRECT_PWM_OUTPUT_CHANNELS  6

boards/holybro/kakuteh7/bootloader.px4board

@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""

boards/holybro/kakuteh7/default.px4board

@@ -0,0 +1,92 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS3"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_COMMON_BAROMETERS=y
+CONFIG_DRIVERS_BATT_SMBUS=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
+CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
+CONFIG_DRIVERS_OSD=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_PWM_OUT_SIM=y
+CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_DRIVERS_RPM=y
+CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_SIH=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_VMOUNT=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_GPIO=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_MIXER=y
+CONFIG_SYSTEMCMDS_MOTOR_TEST=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_PWM=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/holybro/kakuteh7/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 1048,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the KakuteH7 board",
+    "image": "",
+    "build_time": 0,
+    "summary": "KAKUTEH7",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1835008,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/holybro/kakuteh7/init/rc.board_defaults

@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default BAT1_V_DIV 11.2
+param set-default BAT1_A_PER_V 59.5
+
+# system_power unavailable
+param set-default CBRK_SUPPLY_CHK 894281
+
+# Select the Generic 250 Racer by default
+param set-default SYS_AUTOSTART 4050
+
+# use the Q attitude estimator, it works w/o mag or GPS.
+param set-default SYS_MC_EST_GROUP 3
+param set-default ATT_ACC_COMP 0
+param set-default ATT_W_ACC 0.4000
+param set-default ATT_W_GYRO_BIAS 0.0000
+
+param set-default SYS_HAS_MAG 0
+
+# the startup tune is not great on a binary output buzzer, so disable it
+param set-default CBRK_BUZZER 782090
+
+param set-default IMU_GYRO_RATEMAX 2000
+

boards/holybro/kakuteh7/init/rc.board_extras

@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# KakuteH7 specific board extras init
+#------------------------------------------------------------------------------
+
+if ! param compare OSD_ATXXXX_CFG 0
+then
+	atxxxx start -s
+fi
+
+# DShot telemetry is always on UART7
+dshot telemetry /dev/ttyS5
+

boards/holybro/kakuteh7/init/rc.board_sensors

@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# Holybro KakuteH7 specific board sensors init
+#------------------------------------------------------------------------------
+board_adc start
+
+# The default IMU is an ICM20689, but there might also be an MPU6000
+if ! mpu6000 -R 6 -s start
+then
+	icm20689 -R 6 -s start
+fi
+
+bmp280 -X start

boards/holybro/kakuteh7/nuttx-config/bootloader/defconfig

@@ -0,0 +1,93 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/holybro/kakuteh7/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=22114
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004b
+CONFIG_CDCACM_PRODUCTSTR="PX4 BL Holybro KakuteH7"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3162
+CONFIG_CDCACM_VENDORSTR="Holybro"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_LIB_BOARDCTL=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_USART3=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_TXBUFSIZE=300
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="bootloader_main"

boards/holybro/kakuteh7/nuttx-config/include/board.h

@@ -0,0 +1,419 @@
+/************************************************************************************
+ *
+ *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The holybro KakuteH7  board provides the following clock sources:
+ *
+ *   X1: 8 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 16 MHz RC factory-trimmed
+ *   HSE:  8 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 8,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+#define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(120)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 120)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(2)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(2)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* FDCAN 1 2 clock source */
+
+#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
+ * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The holybro KakuteH7 board has three, LED_GREEN a Green LED, LED_BLUE
+ * a Blue LED and LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_NLEDS       1
+
+#define BOARD_LED_RED     BOARD_LED1
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_2    /* PA10 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_2    /* PA9 */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_2   /* PD6 */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2   /* PD5 */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9  */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8  */
+
+#define GPIO_UART4_RX    GPIO_UART4_RX_5    /* PD0 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_5    /* PD1 */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7  */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6 */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7 */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8 */
+
+/* SPI
+ * SPI1 SD Card
+ * SPI2 is OSD AT7456E
+ * SPI4 is IMU
+ */
+
+#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1   /* PA6 */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1   /* PA7 */
+#define GPIO_SPI1_SCK    GPIO_SPI1_SCK_1    /* PA5 */
+
+#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_1   /* PB14 */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_1   /* PB15 */
+#define GPIO_SPI2_SCK    GPIO_SPI2_SCK_4    /* PB13 */
+
+#define GPIO_SPI4_MISO   GPIO_SPI4_MISO_2   /* PE5 */
+#define GPIO_SPI4_MOSI   GPIO_SPI4_MOSI_2   /* PE6 */
+#define GPIO_SPI4_SCK    GPIO_SPI4_SCK_2    /* PE2 */
+
+/* I2C
+ */
+
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1       /* PB6  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+/* SDMMC1
+ *
+ *      VDD 3.3
+ *      GND
+ *      SDMMC1_CK                           PC12
+ *      SDMMC1_CMD                          PD2
+ *      SDMMC1_D0                           PC8
+ *      SDMMC1_D1                           PC9
+ *      SDMMC1_D2                           PC10
+ *      SDMMC1_D3                           PC11
+ *      GPIO_SDMMC1_NCD                     PG0
+ */
+
+/* USB
+ *
+ *      OTG_FS_DM                           PA11
+ *      OTG_FS_DP                           PA12
+ *      VBUS                                PA9
+ */
+
+
+/* Board provides GPIO or other Hardware for signaling to timing analyzer */
+
+# define PROBE_INIT(mask)
+# define PROBE(n,s)
+# define PROBE_MARK(n)
+

boards/holybro/kakuteh7/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,40 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+#define DMAMAP_SPI4_RX    DMAMAP_DMA12_SPI4RX_1 /* DMA2 */
+#define DMAMAP_SPI4_TX    DMAMAP_DMA12_SPI4TX_1 /* DMA2 */
+
+#define DMAMAP_USART2_RX   DMAMAP_DMA12_USART2RX_1 /* DMA2 */
+

boards/holybro/kakuteh7/nuttx-config/nsh/defconfig

@@ -0,0 +1,224 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_SPI_CALLBACK is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/holybro/kakuteh7/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743II=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004b
+CONFIG_CDCACM_PRODUCTSTR="PX4 KakuteH7"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3162
+CONFIG_CDCACM_VENDORSTR="Holybro"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MM_REGIONS=4
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_DISABLE_IFCONFIG=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_DISABLE_TELNETD=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_MMCSDSPIPORTNO=1
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC1=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI4=y
+CONFIG_STM32H7_SPI4_DMA=y
+CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI_DMA=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGTSTP=y
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_TXBUFSIZE=1500
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_RXDMA=y
+CONFIG_USART2_TXBUFSIZE=2500
+CONFIG_USART3_BAUD=57600
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_SERIAL_CONSOLE=y
+CONFIG_USART3_TXBUFSIZE=1500
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y

boards/holybro/kakuteh7/nuttx-config/scripts/bootloader_script.ld

@@ -0,0 +1,213 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The KakuteH7 uses an STM32H743VI has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743VI, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The KakuteH7 has a Swtich on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743VI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH = 2048K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/holybro/kakuteh7/nuttx-config/scripts/script.ld

@@ -0,0 +1,222 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The KakuteH7 uses an STM32H743VI has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743VI, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The KakuteH7 has a Swtich on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743VI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Emit the the D3 power domain section for locating BDMA data */
+
+	.sram4_reserve (NOLOAD) :
+	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
+	} > sram4
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}