github: fix workspace path

we are removing the gazebo sim tools from this image for now
as we are trying to slim down the image

.ci/Jenkinsfile-compile

@@ -60,6 +60,8 @@ pipeline {
                      "holybro_kakutef7_default",
                      "holybro_pix32v5_default",
                      "matek_h743-slim",
+                     "matek_gnss-m9n-f4_canbootloader",
+                     "matek_gnss-m9n-f4_default",
                      "modalai_fc-v1_default",
                      "modalai_fc-v1_rtps",
                      "modalai_fc-v2_default",

.ci/Jenkinsfile-hardware

@@ -743,8 +743,10 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
   sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
 
   // run logger
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
@@ -778,6 +780,7 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
@@ -789,7 +792,7 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uavcan status" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'

.github/workflows/build_docker.yml

@@ -0,0 +1,154 @@
+# build docker images on:
+# * every pull request
+# * push to master
+# * stable release published
+# * tag name is:
+#   - commit sha if pull request
+#   - 'latest' if push to master
+#   - release name if release
+
+# pushes to registry if:
+# * is not a pull request
+# * is master branch
+# * is the result of release
+
+# builds all nuttx targets and deploys metadata
+
+name: Build docker
+
+on:
+  release:
+    types: [released]
+  push:
+    branches:
+      - 'master'
+  pull_request:
+
+jobs:
+  set_docker_tag:
+    name: Set docker tag
+    runs-on: ubuntu-latest
+    env:
+      DOCKER_TAG: "px4io/px4-dev"
+    outputs:
+      docker_tag: ${{ steps.set-outputs.outputs.docker_tag }}
+
+    steps:
+      - name: Set pull request docker tag
+        if: github.event_name == 'pull_request'
+        run: echo "DOCKER_TAG=px4io/px4-dev:${{ github.sha }}" >> $GITHUB_ENV
+
+      - name: Set push docker tag
+        if: github.event_name == 'push'
+        run: echo "DOCKER_TAG=px4io/px4-dev:latest" >> $GITHUB_ENV
+
+      - name: Set release docker tag
+        if: github.event_name == 'release'
+        run: echo "DOCKER_TAG=px4io/px4-dev:${{ github.event.release.name }}" >> $GITHUB_ENV
+
+      - name: Set docker tag outputs
+        id: set-outputs
+        run: echo "::set-output name=docker_tag::$DOCKER_TAG"
+
+  build_docker:
+    name: Build Docker image
+    runs-on: ubuntu-latest
+    needs: set_docker_tag
+
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v2
+
+      - name: Login to Github Registry
+        uses: docker/login-action@v1
+        if: github.event_name == 'push'
+        with:
+          registry: ghrc.io
+          username: ${{ github.actor }}
+          password: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Set up image builder
+        uses: docker/setup-buildx-action@v1
+
+      - name: Build image
+        uses: docker/build-push-action@v2
+        id: docker_build
+        with:
+          file: Tools/setup/Dockerfile
+          push: ${{ github.event_name != 'pull_request' }}
+          tags: ${{ needs.set_docker_tag.outputs.docker_tag }}
+          outputs: type=tar,dest=/tmp/px4_docker_image.tar
+
+      - name: Save container to artifacts
+        uses: actions/upload-artifact@v2
+        with:
+          name: px4_docker_image
+          path: /tmp/px4_docker_image.tar
+
+      - name: Push to Github Registry
+        uses: docker/build-push-action@v2
+        if: github.event_name == 'push'
+
+      - name: Image Digest
+        run: echo ${{ steps.docker_build.outputs.digest }}
+
+  list_targets:
+    name: Generate target list
+    runs-on: ubuntu-latest
+    needs: build_docker
+    outputs:
+      matrix: ${{ steps.set-matrix.outputs.matrix }}
+
+    steps:
+      - name: Checkout Code
+        uses: actions/checkout@v2
+
+      - name: Setup Python
+        uses: actions/setup-python@v2
+        with:
+          python-version: 3.9
+
+      #- name: Install Python packages
+        #run: pip install -r Tools/setup/requirements.txt
+        #run: pip install kconfiglib
+
+      - id: set-matrix
+        name: Get all nuttx targets
+        run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py -a)"
+
+  build_px4:
+    name: Build targets with Docker
+    runs-on: ubuntu-latest
+    needs: [list_targets, set_docker_tag]
+    #strategy:
+      #matrix: ${{ fromJson(needs.enumerate_targets.outputs.matrix) }}
+
+    steps:
+      - name: Get container from artifacts
+        uses: actions/download-artifact@v2
+        with:
+          name: px4_docker_image
+          path: /tmp
+
+      - name: Load Docker image
+        run: |
+          docker import /tmp/px4_docker_image.tar ${{ needs.set_docker_tag.outputs.docker_tag }}
+          docker image ls -a
+
+      - name: Checkout Code
+        uses: actions/checkout@v2
+
+      - name: Build targets
+        #run: |
+          #docker run --rm -w "${GITHUB_ACTION_PATH}" \
+            #--env=LOCAL_USER_ID="$(id -u)" \
+            #--volume=/tmp:/tmp:rw \
+            #--volume=${GITHUB_ACTION_PATH}:${GITHUB_ACTION_PATH}:rw \
+            #px4io/px4-dev:${{ needs.set_docker_tag.outputs.docker_tag }} /bin/bash -c "make ${{ matrix.target }}"
+
+        run: |
+          docker run --rm -w ${{ github.workspace }} \
+            --env=LOCAL_USER_ID="$(id -u)" \
+            --volume=/tmp:/tmp:rw \
+            --volume=${{ github.workspace }}:${{ github.workspace }}:rw \
+            ${{ needs.set_docker_tag.outputs.docker_tag }} /bin/bash -c "make px4_fmu-v6x"

.github/workflows/compile_linux.yml

@@ -1,54 +0,0 @@
-name: Linux Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-armhf:2021-09-08
-    strategy:
-      matrix:
-        config: [
-          beaglebone_blue_default,
-          emlid_navio2_default,
-          px4_raspberrypi_default,
-          scumaker_pilotpi_default,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-    - name: ccache post-run
-      run: ccache -s

.github/workflows/compile_linux_arm64.yml

@@ -1,51 +0,0 @@
-name: Linux ARM64 Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-aarch64:2021-09-08
-    strategy:
-      matrix:
-        config: [
-          scumaker_pilotpi_arm64,
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 100M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make ${{matrix.config}}
-      run: make ${{matrix.config}}
-    - name: ccache post-run
-      run: ccache -s

.github/workflows/compile_nuttx.yml

@@ -1,118 +0,0 @@
-name: Nuttx Targets
-
-on:
-  push:
-    branches:
-    - 'master'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  build:
-    runs-on: ubuntu-latest
-    container: px4io/px4-dev-nuttx-focal:2021-09-08
-    strategy:
-      fail-fast: false
-      matrix:
-        config: [
-          airmind_mindpx-v2,
-          ark_can-flow,
-          ark_can-gps,
-          ark_can-rtk-gps,
-          atl_mantis-edu,
-          av_x-v1,
-          bitcraze_crazyflie,
-          bitcraze_crazyflie21,
-          cuav_can-gps-v1,
-          cuav_nora,
-          cuav_x7pro,
-          cubepilot_cubeorange,
-          cubepilot_cubeyellow,
-          freefly_can-rtk-gps,
-          holybro_can-gps-v1,
-          holybro_durandal-v1,
-          holybro_kakutef7,
-          holybro_pix32v5,
-          matek_h743-slim,
-          modalai_fc-v1,
-          modalai_fc-v2,
-          mro_ctrl-zero-f7,
-          mro_ctrl-zero-f7-oem,
-          mro_ctrl-zero-h7,
-          mro_ctrl-zero-h7-oem,
-          mro_pixracerpro,
-          mro_x21,
-          mro_x21-777,
-          nxp_fmuk66-e,
-          nxp_fmuk66-v3,
-          nxp_fmurt1062-v1,
-          nxp_ucans32k146,
-          omnibus_f4sd,
-          raspberrypi_pico,
-          px4_fmu-v2,
-          px4_fmu-v3,
-          px4_fmu-v4,
-          px4_fmu-v4pro,
-          px4_fmu-v5,
-          px4_fmu-v5x,
-          px4_fmu-v6u,
-          px4_fmu-v6x,
-          spracing_h7extreme,
-          uvify_core
-          ]
-    steps:
-    - uses: actions/checkout@v1
-      with:
-        token: ${{secrets.ACCESS_TOKEN}}
-
-    - name: Prepare ccache timestamp
-      id: ccache_cache_timestamp
-      shell: cmake -P {0}
-      run: |
-        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
-        message("::set-output name=timestamp::${current_date}")
-    - name: ccache cache files
-      uses: actions/cache@v2
-      with:
-        path: ~/.ccache
-        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
-        restore-keys: ${{matrix.config}}-ccache-
-    - name: setup ccache
-      run: |
-          mkdir -p ~/.ccache
-          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 120M" >> ~/.ccache/ccache.conf
-          echo "hash_dir = false" >> ~/.ccache/ccache.conf
-          ccache -s
-          ccache -z
-
-    - name: make all_variants_${{matrix.config}}
-      run: make all_variants_${{matrix.config}}
-      timeout-minutes: 45
-    - name: make ${{matrix.config}} bloaty_compileunits
-      run: make ${{matrix.config}} bloaty_compileunits || true
-    - name: make ${{matrix.config}} bloaty_inlines
-      run: make ${{matrix.config}} bloaty_inlines || true
-    - name: make ${{matrix.config}} bloaty_segments
-      run: make ${{matrix.config}} bloaty_segments || true
-    - name: make ${{matrix.config}} bloaty_symbols
-      run: make ${{matrix.config}} bloaty_symbols || true
-    - name: make ${{matrix.config}} bloaty_templates
-      run: make ${{matrix.config}} bloaty_templates || true
-    - name: make ${{matrix.config}} bloaty_ram
-      run: make ${{matrix.config}} bloaty_ram || true
-    - name: make ${{matrix.config}} bloaty_compare_master
-      run: make ${{matrix.config}} bloaty_compare_master || true
-    - name: ccache post-run
-      run: ccache -s
-
-    - name: Upload px4 package
-      uses: actions/upload-artifact@v2
-      with:
-        name: px4_package_${{matrix.config}}
-        path: |
-          build/**/*.px4
-          build/**/*.bin

.github/workflows/deploy_all.yml

@@ -1,11 +1,17 @@
-name: Deploy metadata for all targets
+name: Build and deploy all targets with metadata
 
 on:
+  release:
+    types: [published]
+  create:
+    tags:
+      - 'v*'
   push:
     branches:
     - 'master'
     - 'release/*'
     - 'pr-metadata-test'
+    - 'build_and_deploy_mix'
 
 jobs:
   enumerate_targets:
@@ -18,8 +24,8 @@ jobs:
       with:
         token: ${{secrets.ACCESS_TOKEN}}
     - id: set-matrix
-      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py)"
-  build:
+      run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py -a)"
+  build_all:
     runs-on: ubuntu-latest
     needs: enumerate_targets
     strategy:
@@ -34,21 +40,4 @@ jobs:
       run: make ${{matrix.target}}
 
     - name: parameter & events metadata
-      run: |
-        make ${{matrix.target}} ver_gen events_json actuators_json
-        ./src/lib/version/get_git_tag_or_branch_version.sh build/${{ matrix.target }} >> $GITHUB_ENV
-        cd build/${{ matrix.target }}
-        mkdir _metadata || true
-        cp parameters.* events/*.xz actuators.json* _metadata
-
-    - uses: jakejarvis/s3-sync-action@master
-      with:
-        args: --acl public-read
-      env:
-        AWS_S3_BUCKET: 'px4-travis'
-        AWS_ACCESS_KEY_ID: ${{ secrets.AWS_ACCESS_KEY_ID }}
-        AWS_SECRET_ACCESS_KEY: ${{ secrets.AWS_SECRET_ACCESS_KEY }}
-        AWS_REGION: 'us-west-1'
-        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
-        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
-
+      run: make ${{matrix.target}} ver_gen events_json actuators_json

.vscode/cmake-variants.yaml

@@ -196,6 +196,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: matek_h743-slim_default
+    matek_gnss-m9n-f4_canbootloader:
+      short: matek_gnss-m9n-f4_canbootloader
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_m9nf4can_canbootloader
+    matek_gnss-m9n-f4_default:
+      short: matek_gnss-m9n-f4_default
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: matek_gnss-m9n-f4_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel

CMakeLists.txt

@@ -125,6 +125,11 @@ define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                  FULL_DOCS "List of all PX4 module libraries"
                  )
 
+define_property(GLOBAL PROPERTY PX4_KERNEL_MODULE_LIBRARIES
+                 BRIEF_DOCS "PX4 kernel side module libs"
+                 FULL_DOCS "List of all PX4 kernel module libraries"
+                 )
+
 define_property(GLOBAL PROPERTY PX4_MODULE_PATHS
                  BRIEF_DOCS "PX4 module paths"
                  FULL_DOCS "List of paths to all PX4 modules"
@@ -142,6 +147,7 @@ set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
 
 include(px4_add_module)
 set(config_module_list)
+set(config_kernel_list)
 
 # Find Python
 # If using catkin, Python 2 is found since it points

Kconfig

@@ -118,6 +118,11 @@ config BOARD_CRYPTO
     help
         Enable PX4 Crypto Support. Select the implementation under drivers
 
+config BOARD_PROTECTED
+    bool "Memory protection"
+    help
+        Enable memory protection via MPU/MMU
+
 menu "Serial ports"
 
     config BOARD_SERIAL_URT6

LICENSE

@@ -1,6 +1,6 @@
 BSD 3-Clause License
 
-Copyright (c) 2012 - 2021, PX4 Development Team
+Copyright (c) 2012 - 2022, PX4 Development Team
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

ROMFS/px4fmu_common/init.d-posix/rc.replay

@@ -10,7 +10,7 @@ fi
 
 if [ ! -f replay_params.txt ]; then
 	echo "Creating $(pwd)/replay_params.txt"
-	ulog_params -i "${replay}" -d ' ' | grep -e '^EKF2' > replay_params.txt
+	ulog_params -i "${replay}" -l ' ' | grep -e '^EKF2' > replay_params.txt
 fi
 
 publisher_rules_file="orb_publisher.rules"
@@ -21,6 +21,7 @@ ignore_others: false
 EOF
 
 param set SDLOG_DIRS_MAX 7
+param set SDLOG_PROFILE 3
 
 # apply all params before ekf starts, as some params cannot be changed after startup
 replay tryapplyparams

ROMFS/px4fmu_common/init.d/airframes/4019_x500_v2

@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# @name Holybro X500 V2
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @maintainer Farhang Naderi <farhang.nba@gmail.com>
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default IMU_GYRO_CUTOFF 30
+
+param set-default MC_ROLLRATE_P 0.14
+param set-default MC_PITCHRATE_P 0.14
+param set-default MC_ROLLRATE_I 0.3
+param set-default MC_PITCHRATE_I 0.3
+param set-default MC_ROLLRATE_D 0.004
+param set-default MC_PITCHRATE_D 0.004

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -73,6 +73,7 @@ px4_add_romfs_files(
 	4016_holybro_px4vision
 	4017_nxp_hovergames
 	4018_s500_ctrlalloc
+	4019_x500_v2
 	4030_3dr_solo
 	4031_3dr_quad
 	4040_reaper

ROMFS/px4fmu_common/init.d/rc.mc_defaults

@@ -7,7 +7,10 @@
 
 set VEHICLE_TYPE mc
 
-param set-default IMU_GYRO_RATEMAX 800
+if param compare IMU_GYRO_RATEMAX 400
+then
+	param set-default IMU_GYRO_RATEMAX 800
+fi
 
 param set-default NAV_ACC_RAD 2
 

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -130,6 +130,13 @@ then
 	fi
 fi
 
+# SHT3x temperature and hygrometer sensor, external I2C
+if param compare -s SENS_EN_SHT3X 1
+then
+	sht3x start -X
+	sht3x start -X -a 0x45
+fi
+
 # TE MS4525 differential pressure sensor external I2C
 if param compare -s SENS_EN_MS4525 1
 then

Tools/HIL/test_airframes.sh

@@ -48,6 +48,7 @@ do
 
 	${DIR}/reboot.py --device ${SERIAL_DEVICE}
 
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/mtd_params' || true
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/parameters_backup.bson' || true
 

Tools/docker_run.sh

@@ -1,35 +1,5 @@
 #! /bin/bash
 
-if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	echo "guessing PX4_DOCKER_REPO based on input";
-	if [[ $@ =~ .*px4_fmu.* ]]; then
-		# nuttx-px4fmu-v{1,2,3,4,5}
-		PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-09-08"
-	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*beaglebone.* ]] || [[ $@ =~ .*pilotpi.default ]]; then
-		# beaglebone_blue_default, emlid_navio2_default, px4_raspberrypi_default, scumaker_pilotpi_default
-		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2021-08-18"
-	elif [[ $@ =~ .*pilotpi.arm64 ]]; then
-		# scumaker_pilotpi_arm64
-		PX4_DOCKER_REPO="px4io/px4-dev-aarch64:latest"
-	elif [[ $@ =~ .*navio2.* ]] || [[ $@ =~ .*raspberry.* ]] || [[ $@ =~ .*bebop.* ]]; then
-		# posix_rpi_cross, posix_bebop_default
-		PX4_DOCKER_REPO="px4io/px4-dev-armhf:2021-08-18"
-	elif [[ $@ =~ .*clang.* ]] || [[ $@ =~ .*scan-build.* ]]; then
-		# clang tools
-		PX4_DOCKER_REPO="px4io/px4-dev-clang:2021-02-04"
-	elif [[ $@ =~ .*tests* ]]; then
-		# run all tests with simulation
-		PX4_DOCKER_REPO="px4io/px4-dev-simulation-bionic:2021-12-11"
-	fi
-else
-	echo "PX4_DOCKER_REPO is set to '$PX4_DOCKER_REPO'";
-fi
-
-# otherwise default to nuttx
-if [ -z ${PX4_DOCKER_REPO+x} ]; then
-	PX4_DOCKER_REPO="px4io/px4-dev-nuttx-focal:2021-09-08"
-fi
-
 # docker hygiene
 
 #Delete all stopped containers (including data-only containers)
@@ -38,30 +8,23 @@ fi
 #Delete all 'untagged/dangling' (<none>) images
 #docker rmi $(docker images -q -f dangling=true)
 
-echo "PX4_DOCKER_REPO: $PX4_DOCKER_REPO";
+if [[ -z "${DOCKER_TAG}" ]]; then
+  TAG_NAME=""
+else
+  TAG_NAME=":${DOCKER_TAG}"
+fi
+
+PX4_DOCKER_REPO="px4io/px4-dev$TAG_NAME"
+
+echo $PX4_DOCKER_REPO
 
 PWD=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
 SRC_DIR=$PWD/../
 
-CCACHE_DIR=${HOME}/.ccache
-mkdir -p "${CCACHE_DIR}"
-
 docker run -it --rm -w "${SRC_DIR}" \
-	--env=AWS_ACCESS_KEY_ID \
-	--env=AWS_SECRET_ACCESS_KEY \
-	--env=BRANCH_NAME \
-	--env=CCACHE_DIR="${CCACHE_DIR}" \
-	--env=CI \
-	--env=CODECOV_TOKEN \
-	--env=COVERALLS_REPO_TOKEN \
-	--env=LOCAL_USER_ID="$(id -u)" \
-	--env=PX4_ASAN \
-	--env=PX4_MSAN \
-	--env=PX4_TSAN \
-	--env=PX4_UBSAN \
-	--env=TRAVIS_BRANCH \
-	--env=TRAVIS_BUILD_ID \
-	--publish 14556:14556/udp \
-	--volume=${CCACHE_DIR}:${CCACHE_DIR}:rw \
-	--volume=${SRC_DIR}:${SRC_DIR}:rw \
-	${PX4_DOCKER_REPO} /bin/bash -c "$1 $2 $3"
+  --env=LOCAL_USER_ID="$(id -u)" \
+  --publish 14556:14556/udp \
+  --volume=/tmp/.X11-unix:/tmp/.X11-unix \
+  --volume=/tmp:/tmp:rw \
+  --volume=${SRC_DIR}:${SRC_DIR}:rw \
+  ${PX4_DOCKER_REPO} /bin/bash -c "$1 $2 $3"

Tools/gazebo_sitl_multiple_run.sh

@@ -39,7 +39,7 @@ function spawn_model() {
 
 	echo "Spawning ${MODEL}_${N} at ${X} ${Y}"
 
-	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.0
+	gz model --spawn-file=/tmp/${MODEL}_${N}.sdf --model-name=${MODEL}_${N} -x ${X} -y ${Y} -z 0.83
 
 	popd &>/dev/null
 

Tools/generate_board_targets_json.py

@@ -6,14 +6,14 @@ import os
 import sys
 import json
 import re
-from kconfiglib import Kconfig
+# from kconfiglib import Kconfig
 
-kconf = Kconfig()
+# kconf = Kconfig()
 
 # Supress warning output
-kconf.warn_assign_undef = False
-kconf.warn_assign_override = False
-kconf.warn_assign_redun = False
+# kconf.warn_assign_undef = False
+# kconf.warn_assign_override = False
+# kconf.warn_assign_redun = False
 
 source_dir = os.path.join(os.path.dirname(os.path.abspath(__file__)), '..')
 
@@ -23,6 +23,10 @@ parser.add_argument('-v', '--verbose', dest='verbose', action='store_true',
                     help='Verbose Output')
 parser.add_argument('-p', '--pretty', dest='pretty', action='store_true',
                     help='Pretty output instead of a single line')
+parser.add_argument('-a', '--all_variants', dest='all_variants', action='store_true',
+                    help='Prints targets into a single all_variants_* target')
+parser.add_argument('-b', '--bloaty', dest='bloaty', action='store_true',
+                    help='Includes all bloaty targets')
 
 args = parser.parse_args()
 verbose = args.verbose
@@ -35,48 +39,66 @@ excluded_labels = [
     'nolockstep', 'replay', 'test',
     'uavcanv1' # TODO: fix and enable
     ]
+bloaty_helpers = [
+    'bloaty_compileunits',
+    'bloaty_inlines',
+    'bloaty_segments',
+    'bloaty_symbols',
+    'bloaty_templates',
+    'bloaty_ram',
+    'bloaty_compare_master',
+    ]
 
-def process_target(px4board_file, target_name):
-    ret = None
-    platform = None
-    toolchain = None
+# def process_target(px4board_file, target_name):
+    # ret = None
+    # platform = None
+    # toolchain = None
 
-    if px4board_file.endswith("default.px4board") or \
-        px4board_file.endswith("recovery.px4board") or \
-        px4board_file.endswith("bootloader.px4board"):
-        kconf.load_config(px4board_file, replace=True)
-    else: # Merge config with default.px4board
-        default_kconfig = re.sub(r'[a-zA-Z\d_]+\.px4board', 'default.px4board', px4board_file)
-        kconf.load_config(default_kconfig, replace=True)
-        kconf.load_config(px4board_file, replace=False)
+    # if px4board_file.endswith("default.px4board") or \
+        # px4board_file.endswith("recovery.px4board") or \
+        # px4board_file.endswith("bootloader.px4board"):
+        # kconf.load_config(px4board_file, replace=True)
+    # else: # Merge config with default.px4board
+        # default_kconfig = re.sub(r'[a-zA-Z\d_]+\.px4board', 'default.px4board', px4board_file)
+        # kconf.load_config(default_kconfig, replace=True)
+        # kconf.load_config(px4board_file, replace=False)
 
-    if "BOARD_TOOLCHAIN" in kconf.syms:
-        toolchain = kconf.syms["BOARD_TOOLCHAIN"].str_value
+    # if "BOARD_TOOLCHAIN" in kconf.syms:
+        # toolchain = kconf.syms["BOARD_TOOLCHAIN"].str_value
 
-    if "BOARD_PLATFORM" in kconf.syms:
-        platform = kconf.syms["BOARD_PLATFORM"].str_value
+    # if "BOARD_PLATFORM" in kconf.syms:
+        # platform = kconf.syms["BOARD_PLATFORM"].str_value
 
-    assert platform, f"PLATFORM not found in {px4board_file}"
+    # assert platform, f"PLATFORM not found in {px4board_file}"
 
-    if platform not in excluded_platforms:
-        # get the container based on the platform and toolchain
-        container = platform
-        if platform == 'posix':
-            container = 'base-focal'
-            if toolchain:
-                if toolchain.startswith('aarch64'):
-                    container = 'aarch64'
-                elif toolchain == 'arm-linux-gnueabihf':
-                    container = 'armhf'
-                else:
-                    if verbose: print(f'possibly unmatched toolchain: {toolchain}')
-        elif platform == 'nuttx':
-            container = 'nuttx-focal'
+    # if platform not in excluded_platforms:
+        # # get the container based on the platform and toolchain
+        # container = platform
+        # if platform == 'posix':
+            # container = 'base-focal'
+            # if toolchain:
+                # if toolchain.startswith('aarch64'):
+                    # container = 'aarch64'
+                # elif toolchain == 'arm-linux-gnueabihf':
+                    # container = 'armhf'
+                # else:
+                    # if verbose: print(f'possibly unmatched toolchain: {toolchain}')
+        # elif platform == 'nuttx':
+            # container = 'nuttx-focal'
 
-        ret = {'target': target_name, 'container': container}
+        # ret = {'target': target_name, 'container': container}
 
-    return ret
+    # return ret
 
+def process_bloaty(target_path, target_name):
+    response = []
+    for bloat in bloaty_helpers:
+        bloaty_name = target_name + ' ' + bloat + ' || true'
+        processed_target = process_target(target_path, bloaty_name)
+        response.append(processed_target)
+    return response
+
+# Look up boards from each manufacturer
 for manufacturer in os.scandir(os.path.join(source_dir, 'boards')):
     if not manufacturer.is_dir():
         continue
@@ -85,18 +107,37 @@ for manufacturer in os.scandir(os.path.join(source_dir, 'boards')):
         continue
 
     for board in os.scandir(manufacturer.path):
+        # Only boards are directories don't proceed if otherwise
         if not board.is_dir():
             continue
-        for files in os.scandir(board.path):
-            if files.is_file() and files.name.endswith('.px4board'):
-                label = files.name[:-9]
-                target_name = manufacturer.name + '_' + board.name + '_' + label
-                if label in excluded_labels:
-                    if verbose: print(f'excluding label {label} ({target_name})')
-                    continue
-                target = process_target(files.path, target_name)
-                if target is not None:
-                    build_configs.append(target)
+
+        if args.all_variants:
+            # The all_variants target makes all targets for a board
+            target_name = 'all_variants_' + manufacturer.name + '_' + board.name
+            default_target_path = f'{board.path}/default.px4board'
+            # target = process_target(default_target_path, target_name)
+            target = {'target': target_name}
+            if target is not None:
+                build_configs.append(target)
+            if args.bloaty and target is not None:
+                # bloaty targets
+                bloat_target_name = manufacturer.name + '_' + board.name
+                # bloaty_targets = process_bloaty(default_target_path, bloat_target_name)
+                bloaty_targets = {'target': bloat_target_name}
+                build_configs += bloaty_targets
+        else:
+            # Each board can have multiple variant targets
+            for files in os.scandir(board.path):
+                if files.is_file() and files.name.endswith('.px4board'):
+                    label = files.name[:-9]
+                    target_name = manufacturer.name + '_' + board.name + '_' + label
+                    if label in excluded_labels:
+                        if verbose: print(f'excluding label {label} ({target_name})')
+                        continue
+                    # target = process_target(files.path, target_name)
+                    target = {'target': target_name}
+                    if target is not None:
+                        build_configs.append(target)
 
 
 github_action_config = { 'include': build_configs }

Tools/module_config/generate_actuators_metadata.py

@@ -142,7 +142,6 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
         }
     if 'show_subgroups_if' in actuator_output_yaml:
         actuator_output['show-subgroups-if'] = actuator_output_yaml['show_subgroups_if']
-    add_reverse_range_param = actuator_output_yaml.get('add_reverse_range_param', False)
 
     # config parameters
     def get_config_params(param_list):
@@ -257,14 +256,13 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
                 per_channel_params.append(param)
 
 
-        if add_reverse_range_param:
-            param = {
-                    'label': 'Rev Range\n(for Servos)',
-                    'name': param_prefix+'_REV',
-                    'index-offset': -1,
-                    'show-as': 'bitset',
-                }
-            per_channel_params.append(param)
+        param = {
+                'label': 'Rev Range\n(for Servos)',
+                'name': param_prefix+'_REV',
+                'index-offset': -1,
+                'show-as': 'bitset',
+            }
+        per_channel_params.append(param)
 
         # TODO: support non-standard per-channel parameters
 

Tools/module_config/generate_params.py

@@ -178,7 +178,6 @@ def get_actuator_output_params(yaml_config, output_functions,
     all_params = {}
     group_idx = 0
 
-    add_reverse_range_param = yaml_config['actuator_output'].get('add_reverse_range_param', False)
     all_param_prefixes = {}
 
     def add_local_param(param_name, param_def):
@@ -299,13 +298,9 @@ Note that non-motor outputs might already be active in prearm state if COM_PREAR
 '''
         minimum_description = \
 '''Minimum output value (when not disarmed).
-
-The output range can be reversed by setting Min > Max.
 '''
         maximum_description = \
 '''Maxmimum output value (when not disarmed).
-
-The output range can be reversed by setting Min > Max.
 '''
         failsafe_description = \
 '''This is the output value that is set when in failsafe mode.
@@ -346,29 +341,29 @@ When set to -1 (default), the value depends on the function (see {:}).
                     }
                 add_local_param(param_prefix+'_'+param_suffix+'${i}', param)
 
-    if add_reverse_range_param:
-        for param_prefix in all_param_prefixes:
-            groups = all_param_prefixes[param_prefix]
-            # collect the bits
-            channel_bits = {}
-            for instance_start, instance_start_label, num_instances, label in groups:
-                for instance in range(instance_start, instance_start+num_instances):
-                    instance_label = instance - instance_start + instance_start_label
-                    channel_bits[instance-1] = label + ' ' + str(instance_label)
+    # add reverse range param
+    for param_prefix in all_param_prefixes:
+        groups = all_param_prefixes[param_prefix]
+        # collect the bits
+        channel_bits = {}
+        for instance_start, instance_start_label, num_instances, label in groups:
+            for instance in range(instance_start, instance_start+num_instances):
+                instance_label = instance - instance_start + instance_start_label
+                channel_bits[instance-1] = label + ' ' + str(instance_label)
 
-            param = {
-                'description': {
-                    'short': 'Reverse Output Range for '+module_name,
-                    'long':
+        param = {
+            'description': {
+                'short': 'Reverse Output Range for '+module_name,
+                'long':
 '''Allows to reverse the output range for each channel.
 Note: this is only useful for servos.
 '''.format(channel_label),
-                    },
-                'type': 'bitmask',
-                'default': 0,
-                'bit': channel_bits
-                }
-            add_local_param(param_prefix+'_REV', param)
+                },
+            'type': 'bitmask',
+            'default': 0,
+            'bit': channel_bits
+            }
+        add_local_param(param_prefix+'_REV', param)
 
     if verbose: print('adding actuator params: {:}'.format(all_params))
     return all_params

Tools/setup/Dockerfile

@@ -0,0 +1,55 @@
+#
+# PX4 base development environment
+#
+
+FROM ubuntu:20.04
+LABEL maintainer="Daniel Agar <daniel@agar.ca>, Ramon Roche <mrpollo@gmail.com>"
+
+ENV DEBIAN_FRONTEND noninteractive
+ENV LANG C.UTF-8
+ENV LC_ALL C.UTF-8
+
+# Installing required utilities
+RUN apt-get update && apt-get -y --quiet --no-install-recommends install \
+  ca-certificates \
+  gnupg \
+  lsb-core \
+  lsb-release \
+  sudo \
+  software-properties-common \
+  wget \
+  gosu \
+  ;
+
+# Install PX4 Requirements
+COPY Tools/setup/requirements.txt /tmp/requirements.txt
+COPY Tools/setup/ubuntu.sh /tmp/ubuntu.sh
+# We support pre-downloading the gcc arm none eabi compiler
+# to speed up build times, if the file is not present when
+# building, the ubuntu.sh script will download it from source
+COPY *gcc-arm-none-eabi-9-2020-q2-update-linux.tar.bz2 /tmp/gcc-arm-none-eabi-9-2020-q2-update-linux.tar.bz2
+# The PATH env is set within ubuntu.sh, but given how we
+# are running the image using `gosu` to avoid read-only problems
+# with the filesystem the env variable does not persist
+ENV PATH="/opt/gcc-arm-none-eabi-9-2020-q2-update/bin:$PATH"
+ENV PATH="/opt/jdk-14.0.2+12/bin:$PATH"
+RUN bash /tmp/ubuntu.sh --from-docker --with-java --with-rtps --no-sim-tools
+
+ENV DISPLAY :99
+
+ENV FASTRTPSGEN_DIR="/usr/local/bin/"
+ENV TERM=xterm
+ENV TZ=UTC
+
+# SITL UDP PORTS
+EXPOSE 14556/udp
+EXPOSE 14557/udp
+
+# create user with id 1001 (jenkins docker workflow default)
+RUN useradd --shell /bin/bash -u 1001 -c "" -m user && usermod -a -G dialout user
+
+# create and start as LOCAL_USER_ID
+COPY Tools/setup/docker-entrypoint.sh /usr/local/bin/entrypoint.sh
+ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
+
+CMD ["/bin/bash"]

Tools/setup/arch.sh

@@ -48,7 +48,6 @@ echo "Installing PX4 general dependencies"
 sudo pacman -Sy --noconfirm --needed \
 	astyle \
 	base-devel \
-	ccache \
 	clang \
 	cmake \
 	cppcheck \

Tools/setup/docker-entrypoint.sh

@@ -0,0 +1,28 @@
+#!/bin/bash
+
+# Start virtual X server in the background
+# - DISPLAY default is :99, set in dockerfile
+# - Users can override with `-e DISPLAY=` in `docker run` command to avoid
+#   running Xvfb and attach their screen
+if [[ -x "$(command -v Xvfb)" && "$DISPLAY" == ":99" ]]; then
+	echo "Starting Xvfb"
+	Xvfb :99 -screen 0 1600x1200x24+32 &
+fi
+
+# Check if the ROS_DISTRO is passed and use it
+# to source the ROS environment
+if [ -n "${ROS_DISTRO}" ]; then
+	source "/opt/ros/$ROS_DISTRO/setup.bash"
+fi
+
+# Use the LOCAL_USER_ID if passed in at runtime
+if [ -n "${LOCAL_USER_ID}" ]; then
+	echo "Starting with UID : $LOCAL_USER_ID"
+	# modify existing user's id
+	usermod -u $LOCAL_USER_ID user
+
+	# run as user
+  exec gosu user "$@"
+else
+	exec "$@"
+fi

Tools/setup/ubuntu.sh

@@ -2,20 +2,22 @@
 
 set -e
 
-## Bash script to setup PX4 development environment on Ubuntu LTS (20.04, 18.04, 16.04).
+## Bash script to setup PX4 development environment on Ubuntu LTS (20.04, 18.04).
 ## Can also be used in docker.
 ##
 ## Installs:
-## - Common dependencies and tools for nuttx, jMAVSim, Gazebo
+## - Common dependencies and tools for NuttX, jMAVSim, Gazebo
 ## - NuttX toolchain (omit with arg: --no-nuttx)
-## - jMAVSim and Gazebo9 simulator (omit with arg: --no-sim-tools)
-##
-## Not Installs:
-## - FastRTPS and FastCDR
+## - jMAVSim and Gazebo simulator (omit with arg: --no-sim-tools)
+## Optional:
+## - FastRTPS and FastCDR (with args: --with-rtps)
 
 INSTALL_NUTTX="true"
 INSTALL_SIM="true"
 INSTALL_ARCH=`uname -m`
+INSTALL_RTPS="false"
+INSTALL_JAVA="false"
+INSIDE_DOCKER="false"
 
 # Parse arguments
 for arg in "$@"
@@ -28,19 +30,19 @@ do
 		INSTALL_SIM="false"
 	fi
 
-done
+	if [[ $arg == "--with-rtps" ]]; then
+		INSTALL_RTPS="true"
+	fi
 
-# detect if running in docker
-if [ -f /.dockerenv ]; then
-	echo "Running within docker, installing initial dependencies";
-	apt-get --quiet -y update && DEBIAN_FRONTEND=noninteractive apt-get --quiet -y install \
-		ca-certificates \
-		gnupg \
-		lsb-core \
-		sudo \
-		wget \
-		;
-fi
+	if [[ $arg == "--with-java" ]]; then
+		INSTALL_JAVA="true"
+	fi
+
+	if [[ $arg == "--from-docker" ]]; then
+		INSIDE_DOCKER="true"
+	fi
+
+done
 
 # script directory
 DIR=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
@@ -69,95 +71,119 @@ elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
 fi
 
+VERBOSE_BAR="####################"
+echo
+echo $VERBOSE_BAR
+echo "#⚡️ Starting PX4 Dependency Installer for Ubuntu ${UBUNTU_RELEASE} (${INSTALL_ARCH})"
+echo "# Options:
+#
+#  - Install NuttX = ${INSTALL_NUTTX}
+#  - Install Java = ${INSTALL_JAVA}
+#  - Install Simulation = ${INSTALL_SIM}
+#  - Install RTPS = ${INSTALL_RTPS}"
+echo $VERBOSE_BAR
+echo
 
 echo
-echo "Installing PX4 general dependencies"
+echo $VERBOSE_BAR
+echo "🍻 Installing System Dependencies"
+echo $VERBOSE_BAR
+echo
 
 sudo apt-get update -y --quiet
 sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-	astyle \
 	build-essential \
-	ccache \
-	cmake \
-	cppcheck \
-	file \
-	g++ \
-	gcc \
-	gdb \
-	git \
-	lcov \
-	libxml2-dev \
-	libxml2-utils \
-	make \
-	ninja-build \
-	python3 \
-	python3-dev \
-	python3-pip \
-	python3-setuptools \
-	python3-wheel \
-	rsync \
-	shellcheck \
-	unzip \
-	zip \
-	;
+  g++ \
+  gcc \
+  gdb \
+  astyle \
+  cmake \
+  cppcheck \
+  file \
+  git \
+  lcov \
+  libxml2-dev \
+  libxml2-utils \
+  make \
+  ninja-build \
+  python3 \
+  python3-dev \
+  python3-pip \
+  python3-setuptools \
+  python3-wheel \
+  rsync \
+  shellcheck \
+  unzip \
+  zip \
+  libssl-dev \
+  ;
 
-if [[ "${UBUNTU_RELEASE}" == "16.04" ]]; then
-	echo "Installing Ubuntu 16.04 PX4-compatible ccache version"
-	wget -O /tmp/ccache_3.4.1-1_amd64.deb http://launchpadlibrarian.net/356662933/ccache_3.4.1-1_amd64.deb
-	sudo dpkg -i /tmp/ccache_3.4.1-1_amd64.deb
-fi
-
-# Python3 dependencies
+# Python 3 dependencies
 echo
-echo "Installing PX4 Python3 dependencies"
+echo $VERBOSE_BAR
+echo "🍻 Installing Python dependencies"
+echo $VERBOSE_BAR
+echo
+
 if [ -n "$VIRTUAL_ENV" ]; then
 	# virtual envrionments don't allow --user option
-	python -m pip install -r ${DIR}/requirements.txt
+  python -m pip install -r ${DIR}/requirements.txt
 else
 	# older versions of Ubuntu require --user option
-	python3 -m pip install --user -r ${DIR}/requirements.txt
+  if [[ $INSIDE_DOCKER == "true" ]]; then
+    # when running inside a docker container we don't need to install
+    # under --user since the installer user is root
+    # its best to install packages globaly for any user to find
+    python3 -m pip install -r /tmp/requirements.txt
+  else
+    python3 -m pip install --user -r ${DIR}/requirements.txt
+  fi
 fi
 
 # NuttX toolchain (arm-none-eabi-gcc)
 if [[ $INSTALL_NUTTX == "true" ]]; then
 
 	echo
-	echo "Installing NuttX dependencies"
+  echo $VERBOSE_BAR
+	echo "🍻 Installing NuttX dependencies"
+  echo $VERBOSE_BAR
+	echo
 
 	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		automake \
-		binutils-dev \
-		bison \
-		build-essential \
-		flex \
-		g++-multilib \
-		gcc-multilib \
-		gdb-multiarch \
-		genromfs \
-		gettext \
-		gperf \
-		libelf-dev \
-		libexpat-dev \
-		libgmp-dev \
-		libisl-dev \
-		libmpc-dev \
-		libmpfr-dev \
-		libncurses5 \
-		libncurses5-dev \
-		libncursesw5-dev \
-		libtool \
-		pkg-config \
-		screen \
-		texinfo \
-		u-boot-tools \
-		util-linux \
-		vim-common \
-		;
-	if [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		kconfig-frontends \
-		;
-	fi
+    automake \
+    binutils-dev \
+    bison \
+    flex \
+    genromfs \
+    gettext \
+    gperf \
+    libelf-dev \
+    libexpat-dev \
+    libgmp-dev \
+    libisl-dev \
+    libmpc-dev \
+    libmpfr-dev \
+    libncurses5 \
+    libncurses5-dev \
+    libncursesw5-dev \
+    libtool \
+    pkg-config \
+    screen \
+    texinfo \
+    u-boot-tools \
+    util-linux \
+    vim-common \
+    g++-arm-linux-gnueabihf \
+    gcc-arm-linux-gnueabihf \
+    g++-aarch64-linux-gnu \
+    gcc-aarch64-linux-gnu \
+    ;
+
+  if [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
+    sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+    kconfig-frontends \
+    ;
+  fi
 
 
 	if [ -n "$USER" ]; then
@@ -165,97 +191,186 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		sudo usermod -a -G dialout $USER
 	fi
 
-	# arm-none-eabi-gcc
-	NUTTX_GCC_VERSION="9-2020-q2-update"
-	NUTTX_GCC_VERSION_SHORT="9-2020q2"
+  NUTTX_GCC_VERSION="9-2020-q2-update"
+  NUTTX_GCC_VERSION_SHORT="9-2020q2"
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Verifying proper gcc version (${NUTTX_GCC_VERSION}), and installing if not found"
+  echo
 
-	source $HOME/.profile # load changed path for the case the script is reran before relogin
+  source $HOME/.profile # load changed path for the case the script is reran before relogin
 	if [ $(which arm-none-eabi-gcc) ]; then
-		GCC_VER_STR=$(arm-none-eabi-gcc --version)
-		GCC_FOUND_VER=$(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}")
-	fi
+    GCC_VER_STR=$(arm-none-eabi-gcc --version)
+    GCC_VER_FOUND=$(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}")
+  fi
 
-	if [[ "$GCC_FOUND_VER" == "1" ]]; then
-		echo "arm-none-eabi-gcc-${NUTTX_GCC_VERSION} found, skipping installation"
+  if [[ $(echo $GCC_VER_STR | grep -c "${NUTTX_GCC_VERSION}") == "1" ]]; then
+    echo "📌 Skipping installation, the arm cross compiler was found"
+    echo $VERBOSE_BAR
+	  echo
 
-	else
-		echo "Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
-		wget -O /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-${INSTALL_ARCH}-linux.tar.bz2 && \
-			sudo tar -jxf /tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2 -C /opt/;
+  else
+    echo "📌 The arm cross compiler was not found";
+    echo " * Installing arm-none-eabi-gcc-${NUTTX_GCC_VERSION}";
+    # The arm cross compiler hosting provider is known to throttle download speeds
+    # for users who reach a certain limit of downloads in a given time frame
+    # for this reason we allow for using a previously downloaded file
+    # this is specially helpful when debugging this installer script
+    # from within a container COMPILER_PATH="/tmp/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}-linux.tar.bz2"
+    COMPILER_NAME="gcc-arm-none-eabi-${NUTTX_GCC_VERSION}"
+    COMPILER_PATH="/tmp/$COMPILER_NAME-linux.tar.bz2"
+    if [ ! -f "$COMPILER_PATH" ]; then
+      wget -O $COMPILER_PATH https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu-rm/${NUTTX_GCC_VERSION_SHORT}/${COMPILER_NAME}-${INSTALL_ARCH}-linux.tar.bz2
+    fi
+    sudo tar -jxf $COMPILER_PATH -C /opt/;
 
-		# add arm-none-eabi-gcc to user's PATH
-		exportline="export PATH=/opt/gcc-arm-none-eabi-${NUTTX_GCC_VERSION}/bin:\$PATH"
+    # add arm-none-eabi-gcc to user's PATH
+    exportline="export PATH=\"/opt/${COMPILER_NAME}/bin:\$PATH\""
+    if [[ $INSIDE_DOCKER == "true" ]]; then
+      # when running on a docker container its best to set the environment globally
+      # since we don't know which user is going to be running commands on the container
+      touch /etc/profile.d/px4env.sh
+      echo $exportline >> /etc/profile.d/px4env.sh
+    else
+      if grep -Fxq "$exportline" $HOME/.profile; then
+        echo "${NUTTX_GCC_VERSION} path already set.";
+      else
+        echo $exportline >> $HOME/.profile;
+      fi
+    fi
+    echo " * arm-none-eabi-gcc (${NUTTX_GCC_VERSION}) Installed Succesful to /opt/${COMPILER_NAME}/bin"
+    echo $VERBOSE_BAR
+	  echo
+  fi
+fi
+
+# Install JAVA
+if [[ $INSTALL_JAVA == "true" ]]; then
+  JDK_VERSION="14.0.2_12"
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Installing Java JDK
+
+  * Version: $JDK_VERSION
+  * Path: /opt/jdk-14.0.2+12"
+  echo $VERBOSE_BAR
+  echo
+
+  JDK_DOWNLOAD="/tmp/OpenJDK14U-jdk_x64_linux_hotspot_$JDK_VERSION.tar.gz"
+  wget -O $JDK_DOWNLOAD https://github.com/AdoptOpenJDK/openjdk14-binaries/releases/download/jdk-14.0.2%2B12/OpenJDK14U-jdk_x64_linux_hotspot_14.0.2_12.tar.gz
+  sudo tar -xzf $JDK_DOWNLOAD -C /opt/
+  export PATH="/opt/jdk-14.0.2+12/bin:$PATH"
+fi
+
+# Fast-RTPS
+if [[ $INSTALL_RTPS == "true" ]]; then
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Installing Fast-RTPS"
+  echo $VERBOSE_BAR
+  echo
+
+  GRADLE_VERSION="6.4.1"
+  wget -O "/tmp/gradle-$GRADLE_VERSION-bin.zip" "https://services.gradle.org/distributions/gradle-$GRADLE_VERSION-bin.zip" \
+    && unzip -d /opt/gradle "/tmp/gradle-$GRADLE_VERSION-bin.zip"
+  export PATH="$PATH:/opt/gradle/gradle-$GRADLE_VERSION/bin"
+
+  # Intall foonathan_memory from source as it is required to Fast-RTPS >= 1.9
+  git clone https://github.com/eProsima/foonathan_memory_vendor.git /tmp/foonathan_memory \
+    && cd /tmp/foonathan_memory \
+    && mkdir build && cd build \
+    && cmake .. \
+    && cmake --build . --target install -- -j $(nproc)
+
+  # Fast-DDS (Fast-RTPS 2.1.1)
+  git clone --recursive https://github.com/eProsima/Fast-DDS.git -b v2.1.1 /tmp/FastRTPS-2.1.1 \
+    && cd /tmp/FastRTPS-2.1.1 \
+    && mkdir build && cd build \
+    && cmake -DTHIRDPARTY=ON -DSECURITY=ON .. \
+    && cmake --build . --target install -- -j $(nproc)
+
+  # Fast-RTPS-Gen 1.0.4
+  git clone --recursive https://github.com/eProsima/Fast-DDS-Gen.git -b v1.0.4 /tmp/Fast-RTPS-Gen-1.0.4 \
+    && cd /tmp/Fast-RTPS-Gen-1.0.4 \
+    && gradle assemble \
+    && gradle install
 
-		if grep -Fxq "$exportline" $HOME/.profile; then
-			echo "${NUTTX_GCC_VERSION} path already set.";
-		else
-			echo $exportline >> $HOME/.profile;
-		fi
-	fi
 fi
 
 # Simulation tools
 if [[ $INSTALL_SIM == "true" ]]; then
 
-	echo
-	echo "Installing PX4 simulation dependencies"
+  echo
+  echo $VERBOSE_BAR
+  echo "🍻 Installing PX4 Simulation Tools"
+  echo
 
-	# General simulation dependencies
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		bc \
-		;
+  if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
+    gazebo_version=9
+  elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
+    gazebo_version=11
+  fi
 
-	if [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
-		java_version=11
-		gazebo_version=9
-	elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
-		java_version=13
-		gazebo_version=11
-	else
-		java_version=14
-		gazebo_version=11
-	fi
-	# Java (jmavsim or fastrtps)
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		ant \
-		openjdk-$java_version-jre \
-		openjdk-$java_version-jdk \
-		libvecmath-java \
-		;
+  echo "  * Gazebo Version $gazebo_version"
+  echo $VERBOSE_BAR
 
-	# Set Java 11 as default
-	sudo update-alternatives --set java $(update-alternatives --list java | grep "java-$java_version")
+  # General simulation dependencies
+  sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+    bc \
+    ant \
+    libvecmath-java \
+    ;
 
-	# Gazebo
-	sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
-	wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
-	# Update list, since new gazebo-stable.list has been added
-	sudo apt-get update -y --quiet
-	sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
-		dmidecode \
-		gazebo$gazebo_version \
-		gstreamer1.0-plugins-bad \
-		gstreamer1.0-plugins-base \
-		gstreamer1.0-plugins-good \
-		gstreamer1.0-plugins-ugly \
-		gstreamer1.0-libav \
-		libeigen3-dev \
-		libgazebo$gazebo_version-dev \
-		libgstreamer-plugins-base1.0-dev \
-		libimage-exiftool-perl \
-		libopencv-dev \
-		libxml2-utils \
-		pkg-config \
-		protobuf-compiler \
-		;
+  # Installing Gazebo and dependencies
+  # Setup OSRF Gazebo repository
+  sudo sh -c 'echo "deb http://packages.osrfoundation.org/gazebo/ubuntu-stable `lsb_release -cs` main" > /etc/apt/sources.list.d/gazebo-stable.list'
+  wget http://packages.osrfoundation.org/gazebo.key -O - | sudo apt-key add -
+  # Update list, since new gazebo-stable.list has been added
+  sudo apt-get update -y --quiet
+  sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
+    dmidecode \
+    gazebo$gazebo_version \
+    gstreamer1.0-plugins-bad \
+    gstreamer1.0-plugins-base \
+    gstreamer1.0-plugins-good \
+    gstreamer1.0-plugins-ugly \
+    gstreamer1.0-libav \
+    libeigen3-dev \
+    libgazebo$gazebo_version-dev \
+    libgstreamer-plugins-base1.0-dev \
+    libimage-exiftool-perl \
+    libopencv-dev \
+    libxml2-utils \
+    pkg-config \
+    protobuf-compiler \
+    ;
 
-	if sudo dmidecode -t system | grep -q "Manufacturer: VMware, Inc." ; then
-		# fix VMWare 3D graphics acceleration for gazebo
-		echo "export SVGA_VGPU10=0" >> ~/.profile
-	fi
+  if sudo dmidecode -t system | grep -q "Manufacturer: VMware, Inc." ; then
+    # fix VMWare 3D graphics acceleration for gazebo
+    echo "export SVGA_VGPU10=0" >> ~/.profile
+  fi
 fi
 
-if [[ $INSTALL_NUTTX == "true" ]]; then
-	echo
-	echo "Relogin or reboot computer before attempting to build NuttX targets"
+if [[ $INSIDE_DOCKER == "true" ]]; then
+  # cleanup installation
+  rm -rf /tmp/
 fi
+
+if [[ $INSIDE_DOCKER == "false" ]] && [[ $INSTALL_NUTTX == "true" ]]; then
+  echo
+  echo $VERBOSE_BAR
+  echo "💡 We recommend you relogin/reboot before attempting to build NuttX targets"
+  echo $VERBOSE_BAR
+  echo
+fi
+
+echo
+echo
+echo $VERBOSE_BAR
+echo "#⚡️ PX4 Dependency Installer Ended Succesfully
+#
+#  For more information on PX4 Autopilot check out our docs
+#  at docs.px4.io, if you find a bug please file an issue
+#  on GitHub https://github.com/px4/px4-autopilot"
+echo $VERBOSE_BAR
+echo

Tools/uorb_graph/create.py

@@ -56,6 +56,21 @@ def get_N_colors(N, s=0.8, v=0.9):
         hex_out.append("#"+"".join(map(lambda x: format(x, '02x'), rgb)))
     return hex_out
 
+def topic_filename(topic):
+    MSG_PATH = 'msg/'
+
+    file_list = os.listdir(MSG_PATH)
+    msg_files = [file.replace('.msg', '') for file in file_list if file.endswith(".msg")]
+
+    if topic in msg_files:
+        return topic
+    else:
+        for msg_file in msg_files:
+            with open(f'{MSG_PATH}/{msg_file}.msg') as f:
+                ret = re.findall(f'^# TOPICS.*{topic}.*',f.read(),re.MULTILINE)
+                if len(ret) > 0:
+                    return msg_file
+    return "no_file"
 
 class PubSub(object):
     """ Collects either publication or subscription information for nodes
@@ -679,8 +694,7 @@ class OutputJSON(object):
             node['type'] = 'topic'
             node['color'] = topic_colors[topic]
             # url is opened when double-clicking on the node
-            # TODO: does not work for multi-topics
-            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic+'.msg'
+            node['url'] = 'https://github.com/PX4/PX4-Autopilot/blob/master/msg/'+topic_filename(topic)+'.msg'
             nodes.append(node)
 
         data['nodes'] = nodes

boards/ark/can-flow/src/CMakeLists.txt

@@ -61,6 +61,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/ark/can-gps/src/CMakeLists.txt

@@ -63,6 +63,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/ark/can-rtk-gps/src/CMakeLists.txt

@@ -63,6 +63,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/cuav/can-gps-v1/src/CMakeLists.txt

@@ -61,6 +61,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/cubepilot/cubeorange/src/board_config.h

@@ -149,7 +149,6 @@
 #define BOARD_HAS_STATIC_MANIFEST 1
 
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5};
 
 #define BOARD_ENABLE_CONSOLE_BUFFER
 

boards/cubepilot/cubeyellow/src/board_config.h

@@ -144,7 +144,6 @@
 #define BOARD_HAS_STATIC_MANIFEST 1
 
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5};
 
 #define BOARD_ENABLE_CONSOLE_BUFFER
 

boards/freefly/can-rtk-gps/src/CMakeLists.txt

@@ -62,6 +62,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/holybro/can-gps-v1/src/CMakeLists.txt

@@ -68,6 +68,5 @@ else()
 			nuttx_arch
 			nuttx_drivers
 			px4_layer
-			arch_io_pins
 	)
 endif()

boards/holybro/durandal-v1/src/board_config.h

@@ -181,7 +181,6 @@
 
 #define BOARD_NUM_IO_TIMERS 4
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7, 9, 8};
 
 /* Power supply control and monitoring GPIOs */
 

boards/holybro/kakuteh7/bootloader.px4board

@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""

boards/holybro/kakuteh7/default.px4board

@@ -0,0 +1,92 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS3"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_COMMON_BAROMETERS=y
+CONFIG_DRIVERS_BATT_SMBUS=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
+CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
+CONFIG_DRIVERS_OSD=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_PWM_OUT_SIM=y
+CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_ROBOCLAW=y
+CONFIG_DRIVERS_RPM=y
+CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_SIH=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_VMOUNT=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_GPIO=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_MIXER=y
+CONFIG_SYSTEMCMDS_MOTOR_TEST=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_PWM=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/holybro/kakuteh7/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 1048,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the KakuteH7 board",
+    "image": "",
+    "build_time": 0,
+    "summary": "KAKUTEH7",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1835008,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/holybro/kakuteh7/init/rc.board_defaults

@@ -0,0 +1,27 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+param set-default BAT1_V_DIV 11.2
+param set-default BAT1_A_PER_V 59.5
+
+# system_power unavailable
+param set-default CBRK_SUPPLY_CHK 894281
+
+# Select the Generic 250 Racer by default
+param set-default SYS_AUTOSTART 4050
+
+# use the Q attitude estimator, it works w/o mag or GPS.
+param set-default SYS_MC_EST_GROUP 3
+param set-default ATT_ACC_COMP 0
+param set-default ATT_W_ACC 0.4000
+param set-default ATT_W_GYRO_BIAS 0.0000
+
+param set-default SYS_HAS_MAG 0
+
+# the startup tune is not great on a binary output buzzer, so disable it
+param set-default CBRK_BUZZER 782090
+
+param set-default IMU_GYRO_RATEMAX 2000
+

boards/holybro/kakuteh7/init/rc.board_extras

@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# KakuteH7 specific board extras init
+#------------------------------------------------------------------------------
+
+if ! param compare OSD_ATXXXX_CFG 0
+then
+	atxxxx start -s
+fi
+
+# DShot telemetry is always on UART7
+dshot telemetry /dev/ttyS5
+

boards/holybro/kakuteh7/init/rc.board_sensors

@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# Holybro KakuteH7 specific board sensors init
+#------------------------------------------------------------------------------
+board_adc start
+
+# The default IMU is an ICM20689, but there might also be an MPU6000
+if ! mpu6000 -R 6 -s start
+then
+	icm20689 -R 6 -s start
+fi
+
+bmp280 -X start

boards/holybro/kakuteh7/nuttx-config/bootloader/defconfig

@@ -0,0 +1,93 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/holybro/kakuteh7/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=22114
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004b
+CONFIG_CDCACM_PRODUCTSTR="PX4 BL Holybro KakuteH7"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3162
+CONFIG_CDCACM_VENDORSTR="Holybro"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_LIB_BOARDCTL=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_USART3=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_TXBUFSIZE=300
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="bootloader_main"

boards/holybro/kakuteh7/nuttx-config/include/board.h

@@ -0,0 +1,419 @@
+/************************************************************************************
+ *
+ *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The holybro KakuteH7  board provides the following clock sources:
+ *
+ *   X1: 8 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 16 MHz RC factory-trimmed
+ *   HSE:  8 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 8,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+#define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(120)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 120)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(2)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(2)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* FDCAN 1 2 clock source */
+
+#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
+ * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The holybro KakuteH7 board has three, LED_GREEN a Green LED, LED_BLUE
+ * a Blue LED and LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_NLEDS       1
+
+#define BOARD_LED_RED     BOARD_LED1
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_2    /* PA10 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_2    /* PA9 */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_2   /* PD6 */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2   /* PD5 */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9  */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8  */
+
+#define GPIO_UART4_RX    GPIO_UART4_RX_5    /* PD0 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_5    /* PD1 */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7  */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6 */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7 */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8 */
+
+/* SPI
+ * SPI1 SD Card
+ * SPI2 is OSD AT7456E
+ * SPI4 is IMU
+ */
+
+#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1   /* PA6 */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_1   /* PA7 */
+#define GPIO_SPI1_SCK    GPIO_SPI1_SCK_1    /* PA5 */
+
+#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_1   /* PB14 */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_1   /* PB15 */
+#define GPIO_SPI2_SCK    GPIO_SPI2_SCK_4    /* PB13 */
+
+#define GPIO_SPI4_MISO   GPIO_SPI4_MISO_2   /* PE5 */
+#define GPIO_SPI4_MOSI   GPIO_SPI4_MOSI_2   /* PE6 */
+#define GPIO_SPI4_SCK    GPIO_SPI4_SCK_2    /* PE2 */
+
+/* I2C
+ */
+
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_1       /* PB6  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_1       /* PB7  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN6)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN7)
+
+/* SDMMC1
+ *
+ *      VDD 3.3
+ *      GND
+ *      SDMMC1_CK                           PC12
+ *      SDMMC1_CMD                          PD2
+ *      SDMMC1_D0                           PC8
+ *      SDMMC1_D1                           PC9
+ *      SDMMC1_D2                           PC10
+ *      SDMMC1_D3                           PC11
+ *      GPIO_SDMMC1_NCD                     PG0
+ */
+
+/* USB
+ *
+ *      OTG_FS_DM                           PA11
+ *      OTG_FS_DP                           PA12
+ *      VBUS                                PA9
+ */
+
+
+/* Board provides GPIO or other Hardware for signaling to timing analyzer */
+
+# define PROBE_INIT(mask)
+# define PROBE(n,s)
+# define PROBE_MARK(n)
+

boards/holybro/kakuteh7/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,40 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+#define DMAMAP_SPI4_RX    DMAMAP_DMA12_SPI4RX_1 /* DMA2 */
+#define DMAMAP_SPI4_TX    DMAMAP_DMA12_SPI4TX_1 /* DMA2 */
+
+#define DMAMAP_USART2_RX   DMAMAP_DMA12_USART2RX_1 /* DMA2 */
+

boards/holybro/kakuteh7/nuttx-config/nsh/defconfig

@@ -0,0 +1,224 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_SPI_CALLBACK is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/holybro/kakuteh7/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743II=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004b
+CONFIG_CDCACM_PRODUCTSTR="PX4 KakuteH7"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3162
+CONFIG_CDCACM_VENDORSTR="Holybro"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MM_REGIONS=4
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_DISABLE_IFCONFIG=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_DISABLE_TELNETD=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_MMCSDSPIPORTNO=1
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC1=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI4=y
+CONFIG_STM32H7_SPI4_DMA=y
+CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI_DMA=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGTSTP=y
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_TXBUFSIZE=1500
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_RXDMA=y
+CONFIG_USART2_TXBUFSIZE=2500
+CONFIG_USART3_BAUD=57600
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_SERIAL_CONSOLE=y
+CONFIG_USART3_TXBUFSIZE=1500
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y

boards/holybro/kakuteh7/nuttx-config/scripts/bootloader_script.ld

@@ -0,0 +1,213 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The KakuteH7 uses an STM32H743VI has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743VI, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The KakuteH7 has a Swtich on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743VI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH = 2048K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/holybro/kakuteh7/nuttx-config/scripts/script.ld

@@ -0,0 +1,222 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The KakuteH7 uses an STM32H743VI has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743VI, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The KakuteH7 has a Swtich on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743VI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08020000, LENGTH = 1792K /* params in last sector */
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Emit the the D3 power domain section for locating BDMA data */
+
+	.sram4_reserve (NOLOAD) :
+	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
+	} > sram4
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/holybro/kakuteh7/src/CMakeLists.txt

@@ -0,0 +1,66 @@
+############################################################################
+#
+#   Copyright (c) 2016 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
+	add_library(drivers_board
+		bootloader_main.c
+		usb.c
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
+			bootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+
+else()
+	add_library(drivers_board
+		i2c.cpp
+		init.c
+		led.c
+		spi.cpp
+		timer_config.cpp
+		usb.c
+	)
+	add_dependencies(drivers_board arch_board_hw_info)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_spi
+			arch_board_hw_info
+			drivers__led # drv_led_start
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
+			px4_layer
+	)
+endif()

boards/holybro/kakuteh7/src/board_config.h

@@ -0,0 +1,211 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2019 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * holybro KakuteH7 internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+#include <stm32_gpio.h>
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+
+/* Configuration ************************************************************************************/
+
+#  define BOARD_HAS_USB_VALID           1
+#  define BOARD_HAS_NBAT_V              1
+#  define BOARD_HAS_NBAT_I              1
+
+/* Holybro KakuteH7 GPIOs ************************************************************************/
+
+/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
+
+#define GPIO_nLED_RED        /* PC2 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN2)
+
+#define BOARD_HAS_CONTROL_STATUS_LEDS      1
+#define BOARD_OVERLOAD_LED     LED_RED
+
+/*
+ * ADC channels
+ *
+ * These are the channel numbers of the ADCs of the microcontroller that
+ * can be used by the Px4 Firmware in the adc driver
+ */
+
+/* ADC defines to be used in sensors.cpp to read from a particular channel */
+
+#define ADC1_CH(n)                  (n)
+
+/* Define GPIO pins used as ADC N.B. Channel numbers must match below */
+
+#define PX4_ADC_GPIO  \
+	/* PC0 */  GPIO_ADC123_INP10, \
+	/* PC1 */  GPIO_ADC123_INP11, \
+	/* PC5 */  GPIO_ADC12_INP8
+
+/* Define Channel numbers must match above GPIO pin IN(n)*/
+
+#define ADC_BATTERY_VOLTAGE_CHANNEL        /* PC0 */  ADC1_CH(10)
+#define ADC_BATTERY_CURRENT_CHANNEL        /* PC1 */  ADC1_CH(11)
+#define ADC_RSSI_IN_CHANNEL                /* PC5 */  ADC1_CH(8)
+
+#define ADC_CHANNELS \
+	((1 << ADC_BATTERY_VOLTAGE_CHANNEL)       | \
+	 (1 << ADC_BATTERY_CURRENT_CHANNEL)       | \
+	 (1 << ADC_RSSI_IN_CHANNEL))
+
+#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
+
+
+
+/* PWM
+ */
+#define DIRECT_PWM_OUTPUT_CHANNELS  8
+
+#define BOARD_NUM_IO_TIMERS 4
+
+
+/* Tone alarm output */
+
+#define GPIO_TONE_ALARM_IDLE    /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
+#define GPIO_TONE_ALARM_GPIO    /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing
+ */
+#define GPIO_OTGFS_VBUS         /* PA8 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN8)
+
+/* High-resolution timer */
+#define HRT_TIMER               4  /* use timer3 for the HRT */
+#define HRT_TIMER_CHANNEL       1  /* use capture/compare channel 1 */
+
+/* RC Serial port */
+
+/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
+
+#define PWMIN_TIMER                       5
+#define PWMIN_TIMER_CHANNEL    /* T5C1 */ 1
+#define GPIO_PWM_IN            /* PA0  */ GPIO_TIM5_CH1IN
+
+#define GPIO_RSSI_IN                       /* PC5  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTC|GPIO_PIN5)
+
+/* Power switch controls ******************************************************/
+
+#define SDIO_SLOTNO                    0  /* Only one slot */
+#define SDIO_MINOR                     0
+
+/* SD card bringup does not work if performed on the IDLE thread because it
+ * will cause waiting.  Use either:
+ *
+ *  CONFIG_LIB_BOARDCTL=y, OR
+ *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
+ */
+
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
+   !defined(CONFIG_BOARD_INITTHREAD)
+#  warning SDIO initialization cannot be perfomed on the IDLE thread
+#endif
+
+/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
+ * this board support the ADC system_power interface, and therefore
+ * provides the true logic GPIO BOARD_ADC_xxxx macros.
+ */
+#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
+
+/* Board never powers off the Servo rail */
+
+#define BOARD_ADC_SERVO_VALID     (1)
+
+#define BOARD_ADC_BRICK1_VALID  (1)
+
+
+
+/* This board provides a DMA pool and APIs */
+#define BOARD_DMA_ALLOC_POOL_SIZE 5120
+
+/* This board provides the board_on_reset interface */
+
+#define BOARD_HAS_ON_RESET 1
+
+#define PX4_GPIO_INIT_LIST { \
+		PX4_ADC_GPIO,                     \
+		GPIO_TONE_ALARM_IDLE,             \
+		GPIO_RSSI_IN,                     \
+	}
+
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
+// not working on h7 yet, due to ECC
+//#define FLASH_BASED_PARAMS
+
+__BEGIN_DECLS
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+extern void board_peripheral_reset(int ms);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS

boards/holybro/kakuteh7/src/bootloader_main.c

@@ -0,0 +1,75 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2019, 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file bootloader_main.c
+ *
+ * FMU-specific early startup code for bootloader
+*/
+
+#include "board_config.h"
+#include "bl.h"
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+#include <px4_platform_common/init.h>
+
+extern int sercon_main(int c, char **argv);
+
+__EXPORT void board_on_reset(int status) {}
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	/* configure USB interfaces */
+	stm32_usbinitialize();
+}
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	return 0;
+}
+
+void board_late_initialize(void)
+{
+	sercon_main(0, NULL);
+}
+
+extern void sys_tick_handler(void);
+void board_timerhook(void)
+{
+	sys_tick_handler();
+}

boards/holybro/kakuteh7/src/hw_config.h

@@ -0,0 +1,124 @@
+/*
+ * hw_config.h
+ *
+ *  Created on: May 17, 2015
+ *      Author: david_s5
+ */
+
+#ifndef HW_CONFIG_H_
+#define HW_CONFIG_H_
+
+/****************************************************************************
+ * 10-8--2016:
+ *  To simplify the ripple effect on the tools, we will be using
+ *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
+ *  moving forward all Bootloaders must contain the prefix "PX4 BL "
+ *  in the USBDEVICESTRING
+ *  This Change will be made in an upcoming BL release
+ ****************************************************************************/
+/*
+ * Define usage to configure a bootloader
+ *
+ *
+ * Constant                example          Usage
+ * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
+ * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
+ * BOARD_FMUV2
+ * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
+ * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
+ * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
+ * USBPRODUCTID         0x0011                - PID Should match defconfig
+ * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
+ *                                               delay provided by an APP FW
+ * BOARD_TYPE           9                     - Must match .prototype boad_id
+ * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
+ * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
+ * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
+ * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
+ *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
+ *                                              programmatically
+ *
+ * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
+ *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
+ *                                               during a FW upgrade.
+ *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
+ *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
+ *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
+ *                                               in the table.
+ *
+ * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
+ *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
+ *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
+ *                                                                        and hence the address space of FLASH to erase and program.
+ * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
+ * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
+ *
+ * * Other defines are somewhat self explanatory.
+ */
+
+/* Boot device selection list*/
+#define USB0_DEV       0x01
+#define SERIAL0_DEV    0x02
+#define SERIAL1_DEV    0x04
+
+#define APP_LOAD_ADDRESS               0x08020000
+#define BOOTLOADER_DELAY               3000
+#define INTERFACE_USB                  1
+#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
+#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
+
+//#define USE_VBUS_PULL_DOWN
+#define BOOT_DELAY_ADDRESS             0x000001a0
+#define BOARD_TYPE                     1048
+#define BOARD_FLASH_SECTORS            (14)
+#define BOARD_FLASH_SIZE               ((16-2) * 128 * 1024)
+
+#define OSC_FREQ                       8
+
+#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_RED
+#define BOARD_LED_ON                   0
+#define BOARD_LED_OFF                  1
+
+#define SERIAL_BREAK_DETECT_DISABLED   1
+
+/*
+ * Uncommenting this allows to force the bootloader through
+ * a PWM output pin. As this can accidentally initialize
+ * an ESC prematurely, it is not recommended. This feature
+ * has not been used and hence defaults now to off.
+ *
+ * # define BOARD_FORCE_BL_PIN_OUT         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
+ * # define BOARD_FORCE_BL_PIN_IN          (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
+ *
+ * # define BOARD_POWER_PIN_OUT           (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
+ * # define BOARD_POWER_ON                 1
+ * # define BOARD_POWER_OFF                0
+ * # undef  BOARD_POWER_PIN_RELEASE        // Leave pin enabling Power - un comment to release (disable power)
+ *
+*/
+
+#if !defined(ARCH_SN_MAX_LENGTH)
+# define ARCH_SN_MAX_LENGTH 12
+#endif
+
+#if !defined(APP_RESERVATION_SIZE)
+#  define APP_RESERVATION_SIZE 0
+#endif
+
+#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
+#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
+#endif
+
+#if !defined(USB_DATA_ALIGN)
+# define USB_DATA_ALIGN
+#endif
+
+#ifndef BOOT_DEVICES_SELECTION
+#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#ifndef BOOT_DEVICES_FILTER_ONUSB
+#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#endif /* HW_CONFIG_H_ */

boards/holybro/kakuteh7/src/i2c.cpp

@@ -0,0 +1,38 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusExternal(1),
+};

boards/holybro/kakuteh7/src/init.c

@@ -0,0 +1,268 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2012-2019 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * PX4FMU-specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialisation.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include "board_config.h"
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+#include <syslog.h>
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <nuttx/spi/spi.h>
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+#include <nuttx/analog/adc.h>
+#include <nuttx/mm/gran.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <systemlib/px4_macros.h>
+#include <px4_arch/io_timer.h>
+#include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_determine_hw_info.h>
+#include <px4_platform/board_dma_alloc.h>
+
+#include <mpu.h>
+
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
+
+/************************************************************************************
+ * Name: board_peripheral_reset
+ *
+ * Description:
+ *
+ ************************************************************************************/
+__EXPORT void board_peripheral_reset(int ms)
+{
+}
+
+/************************************************************************************
+ * Name: board_on_reset
+ *
+ * Description:
+ * Optionally provided function called on entry to board_system_reset
+ * It should perform any house keeping prior to the rest.
+ *
+ * status - 1 if resetting to boot loader
+ *          0 if just resetting
+ *
+ ************************************************************************************/
+__EXPORT void board_on_reset(int status)
+{
+	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+	}
+
+	if (status >= 0) {
+		up_mdelay(6);
+	}
+}
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void
+stm32_boardinitialize(void)
+{
+	board_on_reset(-1); /* Reset PWM first thing */
+
+	/* configure LEDs */
+
+	board_autoled_initialize();
+
+	/* configure pins */
+
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	board_control_spi_sensors_power_configgpio();
+
+	/* configure USB interfaces */
+
+	stm32_usbinitialize();
+
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	/* Power on Interfaces */
+	board_control_spi_sensors_power(true, 0xffff);
+
+	/* Need hrt running before using the ADC */
+
+	px4_platform_init();
+
+	/* configure SPI interfaces */
+
+	stm32_spiinitialize();
+
+	/* configure the DMA allocator */
+
+	if (board_dma_alloc_init() < 0) {
+		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
+	}
+
+#if defined(SERIAL_HAVE_RXDMA)
+	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
+	static struct hrt_call serial_dma_call;
+	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
+#endif
+
+	/* initial LED state */
+	drv_led_start();
+	led_off(LED_RED);
+
+	if (board_hardfault_init(2, true) != 0) {
+		led_on(LED_RED);
+	}
+
+	/* Get the SPI port for the microSD slot */
+	struct spi_dev_s *spi_dev = stm32_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
+
+	if (!spi_dev) {
+		syslog(LOG_ERR, "[boot] FAILED to initialize SPI port %d\n", CONFIG_NSH_MMCSDSPIPORTNO);
+		led_on(LED_BLUE);
+	}
+
+	/* Now bind the SPI interface to the MMCSD driver */
+	int result = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi_dev);
+
+	if (result != OK) {
+		led_on(LED_BLUE);
+		syslog(LOG_ERR, "[boot] FAILED to bind SPI port 1 to the MMCSD driver\n");
+	}
+
+	up_udelay(20);
+
+
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{15, 128 * 1024, 0x081E0000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+		led_on(LED_AMBER);
+	}
+
+#endif
+
+	/* Configure the HW based on the manifest */
+
+	px4_platform_configure();
+
+	return OK;
+}

boards/holybro/kakuteh7/src/led.c

@@ -0,0 +1,223 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+#ifdef CONFIG_ARCH_LEDS
+static bool nuttx_owns_leds = true;
+//                                B  R  S  G
+//                                0  1  2  3
+static const uint8_t xlatpx4[] = {1, 2, 4, 0};
+#  define xlat(p) xlatpx4[(p)]
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
+};
+
+#else
+
+#  define xlat(p) (p)
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_RED,                      // Indexed by LED_RED, LED_AMBER
+};
+
+#endif
+
+__EXPORT void led_init(void)
+{
+	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
+		if (g_ledmap[l] != 0) {
+			stm32_configgpio(g_ledmap[l]);
+		}
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	/* Drive Low to switch on */
+
+	if (g_ledmap[led] != 0) {
+		stm32_gpiowrite(g_ledmap[led], !state);
+	}
+}
+
+static bool phy_get_led(int led)
+{
+	/* If Low it is on */
+	if (g_ledmap[led] != 0) {
+		return !stm32_gpioread(g_ledmap[led]);
+	}
+
+	return false;
+}
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(xlat(led), true);
+}
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(xlat(led), false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
+}
+
+#ifdef CONFIG_ARCH_LEDS
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ ****************************************************************************/
+
+void board_autoled_initialize(void)
+{
+	led_init();
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+	if (!nuttx_owns_leds) {
+		return;
+	}
+
+	switch (led) {
+	default:
+		break;
+
+	case LED_HEAPALLOCATE:
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_IRQSENABLED:
+		phy_set_led(BOARD_LED_BLUE, false);
+		phy_set_led(BOARD_LED_GREEN, true);
+		break;
+
+	case LED_STACKCREATED:
+		phy_set_led(BOARD_LED_GREEN, true);
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_INIRQ:
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_SIGNAL:
+		phy_set_led(BOARD_LED_GREEN, true);
+		break;
+
+	case LED_ASSERTION:
+		phy_set_led(BOARD_LED_RED, true);
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_PANIC:
+		phy_set_led(BOARD_LED_RED, true);
+		break;
+
+	case LED_IDLE : /* IDLE */
+		phy_set_led(BOARD_LED_RED, true);
+		break;
+	}
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+	if (!nuttx_owns_leds) {
+		return;
+	}
+
+	switch (led) {
+	default:
+		break;
+
+	case LED_SIGNAL:
+		phy_set_led(BOARD_LED_GREEN, false);
+		break;
+
+	case LED_INIRQ:
+		phy_set_led(BOARD_LED_BLUE, false);
+		break;
+
+	case LED_ASSERTION:
+		phy_set_led(BOARD_LED_RED, false);
+		phy_set_led(BOARD_LED_BLUE, false);
+		break;
+
+	case LED_PANIC:
+		phy_set_led(BOARD_LED_RED, false);
+		break;
+
+	case LED_IDLE : /* IDLE */
+		phy_set_led(BOARD_LED_RED, false);
+		break;
+	}
+}
+
+#endif /* CONFIG_ARCH_LEDS */

boards/holybro/kakuteh7/src/spi.cpp

@@ -0,0 +1,51 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2020, 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI1, {
+		initSPIDevice(SPIDEV_MMCSD(0), SPI::CS{GPIO::PortA, GPIO::Pin4})
+	}),
+	initSPIBus(SPI::Bus::SPI2, {
+		initSPIDevice(DRV_OSD_DEVTYPE_ATXXXX, SPI::CS{GPIO::PortB, GPIO::Pin12}),
+	}),
+	initSPIBus(SPI::Bus::SPI4, {
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM20689, SPI::CS{GPIO::PortE, GPIO::Pin4}, SPI::DRDY{GPIO::PortE, GPIO::Pin1}),
+		initSPIDevice(DRV_IMU_DEVTYPE_MPU6000, SPI::CS{GPIO::PortE, GPIO::Pin4}, SPI::DRDY{GPIO::PortE, GPIO::Pin1}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/holybro/kakuteh7/src/timer_config.cpp

@@ -0,0 +1,55 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/io_timer_hw_description.h>
+
+constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
+	initIOTimer(Timer::Timer3, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer2, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer5, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer8, DMA{DMA::Index1}),
+};
+
+constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
+	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel2}, {GPIO::PortB, GPIO::Pin3}),
+	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel3}, {GPIO::PortB, GPIO::Pin10}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel3}, {GPIO::PortA, GPIO::Pin2}),
+	initIOTimerChannel(io_timers, {Timer::Timer8, Timer::Channel3}, {GPIO::PortC, GPIO::Pin8}),
+	initIOTimerChannel(io_timers, {Timer::Timer8, Timer::Channel4}, {GPIO::PortC, GPIO::Pin9}),
+};
+
+constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
+	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/holybro/kakuteh7/src/usb.c

@@ -0,0 +1,105 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2016 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file px4fmu_usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include <arm_arch.h>
+#include <chip.h>
+#include <stm32_gpio.h>
+#include <stm32_otg.h>
+#include "board_config.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the PX4FMU board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32H7_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	uinfo("resume: %d\n", resume);
+}

boards/holybro/pix32v5/src/board_config.h

@@ -430,7 +430,6 @@
 
 #define BOARD_NUM_IO_TIMERS 5
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7, 8, 9, 10};
 
 __BEGIN_DECLS
 

boards/matek/gnss-m9n-f4/canbootloader.px4board

@@ -0,0 +1,7 @@
+CONFIG_PLATFORM_NUTTX=y
+CONFIG_BOARD_PLATFORM="nuttx"
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y

boards/matek/gnss-m9n-f4/default.px4board

@@ -0,0 +1,23 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_BOOTLOADERS=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
+CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SERIAL_PASSTHRU=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/matek/gnss-m9n-f4/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 1014,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the MatekM9nf4can cannode board",
+    "image": "",
+    "build_time": 0,
+    "summary": "MateksysGnss-m9n-f4",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 983040,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/matek/gnss-m9n-f4/init/rc.board_sensors

@@ -0,0 +1,14 @@
+#!/bin/sh
+#
+# Matek M9NF4 CAN specific board sensors init
+#------------------------------------------------------------------------------
+
+gps start -d /dev/ttyS2
+
+icm20602 -s start
+
+rm3100 -b 2 -s start
+
+dps310 -a 118 -X start
+
+sensors start

boards/matek/gnss-m9n-f4/nuttx-config/Kconfig

@@ -0,0 +1,23 @@
+menu "SERIAL_PASSTHRU Configuration"
+config SERIAL_PASSTHRU_UBLOX
+	bool "Detect and Auto Connect on U-Center messages"
+	default n
+	---help---
+		This option will enable the cdc_acm_check to launch
+		The passthru driver.
+
+config SERIAL_PASSTHRU_UBLOX_DEV
+	string "Device path of the GPS"
+	depends on SERIAL_PASSTHRU_UBLOX
+	default "/dev/ttyS2"
+	---help---
+		This is the path of the device used as the right side
+		of the passthru.
+
+config SERIAL_PASSTHRU_UBLOX_BAUDRATE
+	string "baudrate"
+	depends on SERIAL_PASSTHRU_UBLOX
+	default "115200"
+	---help---
+		This option sets the baudrate for the passthru.
+endmenu

boards/matek/gnss-m9n-f4/nuttx-config/canbootloader/defconfig

@@ -0,0 +1,64 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/matek/gnss-m9n-f4/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F405RG=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_C99_BOOL8=y
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_LIB_BOARDCTL=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=131072
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_STM32_TIM8=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944

boards/matek/gnss-m9n-f4/nuttx-config/include/board.h

@@ -0,0 +1,302 @@
+/************************************************************************************
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *   Copyright (c) 2018 PX4 Development Team. All rights reserved.
+ *   Author: Nathan Tsoi <nathan@vertile.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include "board_dma_map.h"
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The Mateksys GNSS M9N-F4 board features a single 8MHz crystal.
+ *
+ * This is the canonical configuration:
+ *   System Clock source           : PLL (HSE)
+ *   SYSCLK(Hz)                    : 168000000    Determined by PLL configuration
+ *   HCLK(Hz)                      : 168000000    (STM32_RCC_CFGR_HPRE)
+ *   AHB Prescaler                 : 1            (STM32_RCC_CFGR_HPRE)
+ *   APB1 Prescaler                : 4            (STM32_RCC_CFGR_PPRE1)
+ *   APB2 Prescaler                : 2            (STM32_RCC_CFGR_PPRE2)
+ *   HSE Frequency(Hz)             : 8000000      (STM32_BOARD_XTAL)
+ *   PLLM                          : 8            (STM32_PLLCFG_PLLM)
+ *   PLLN                          : 336          (STM32_PLLCFG_PLLN)
+ *   PLLP                          : 2            (STM32_PLLCFG_PLLP)
+ *   PLLQ                          : 7            (STM32_PLLCFG_PLLQ)
+ *   Main regulator output voltage : Scale1 mode  Needed for high speed SYSCLK
+ *   Flash Latency(WS)             : 5
+ *   Prefetch Buffer               : OFF
+ *   Instruction cache             : ON
+ *   Data cache                    : ON
+ *   Require 48MHz for USB OTG FS, : Enabled
+ *   SDIO and RNG clock
+ */
+
+/* HSI - 16 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - On-board crystal frequency is 8MHz
+ * LSE - 32.768 kHz
+ */
+
+#define STM32_BOARD_USEHSE      1
+#define STM32_BOARD_XTAL        8000000ul
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE
+ * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ *         = (8,000,000 / 8) * 336
+ *         = 336,000,000
+ * SYSCLK  = PLL_VCO / PLLP
+ *         = 336,000,000 / 2 = 168,000,000
+ * USB OTG FS, SDIO and RNG Clock
+ *         =  PLL_VCO / PLLQ
+ *         = 48,000,000
+ */
+
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)
+
+#define STM32_SYSCLK_FREQUENCY  168000000ul
+
+/* AHB clock (HCLK) is SYSCLK (168MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
+ * otherwise frequency is 2xAPBx.
+ * Note: TIM1,8-11 are on APB2, others on APB1
+ */
+
+#define BOARD_TIM1_FREQUENCY    STM32_APB2_TIM1_CLKIN
+#define BOARD_TIM2_FREQUENCY    STM32_APB1_TIM2_CLKIN
+#define BOARD_TIM3_FREQUENCY    STM32_APB1_TIM3_CLKIN
+#define BOARD_TIM4_FREQUENCY    STM32_APB1_TIM4_CLKIN
+#define BOARD_TIM5_FREQUENCY    STM32_APB1_TIM5_CLKIN
+#define BOARD_TIM6_FREQUENCY    STM32_APB1_TIM6_CLKIN
+#define BOARD_TIM7_FREQUENCY    STM32_APB1_TIM7_CLKIN
+#define BOARD_TIM8_FREQUENCY    STM32_APB2_TIM8_CLKIN
+#define BOARD_TIM9_FREQUENCY    STM32_APB2_TIM9_CLKIN
+#define BOARD_TIM10_FREQUENCY   STM32_APB2_TIM10_CLKIN
+#define BOARD_TIM11_FREQUENCY   STM32_APB2_TIM11_CLKIN
+#define BOARD_TIM12_FREQUENCY   STM32_APB1_TIM12_CLKIN
+#define BOARD_TIM13_FREQUENCY   STM32_APB1_TIM13_CLKIN
+#define BOARD_TIM14_FREQUENCY   STM32_APB1_TIM14_CLKIN
+
+/* LED definitions ******************************************************************/
+/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
+ * way.  The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with stm32_setled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_NLEDS       2
+
+#define BOARD_LED_BLUE    BOARD_LED1
+#define BOARD_LED_GREEN   BOARD_LED2
+
+/* LED bits for use with stm32_setleds() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+
+/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs on board
+ * The following definitions describe how NuttX controls the LEDs:
+ */
+
+#define LED_STARTED       0  /* LED1 */
+#define LED_HEAPALLOCATE  1  /* LED2 */
+#define LED_IRQSENABLED   2  /* LED1 */
+#define LED_STACKCREATED  3  /* LED1 + LED2 */
+#define LED_INIRQ         4  /* LED1 */
+#define LED_SIGNAL        5  /* LED2 */
+#define LED_ASSERTION     6  /* LED1 + LED2 */
+#define LED_PANIC         7  /* LED1 + LED2 */
+
+/* Alternate function pin selections ************************************************/
+
+/* UART1:
+ *
+ * PA10 (RX) and PA9 (TX) are broken out on J5
+ */
+
+#define GPIO_USART1_RX GPIO_USART1_RX_1
+#define GPIO_USART1_TX GPIO_USART1_TX_1
+
+/* UART2:
+ *
+ * PA10 (RX) and PA9 (TX) are broken out on J5
+ */
+
+//#define GPIO_USART2_RX GPIO_USART2_RX_1
+//#define GPIO_USART2_TX GPIO_USART2_TX_1
+
+/* USART3:
+ *
+ * PC10 (TX) and PC11 (RX) are broken out on J4
+ *
+ *
+ * The Silkscreen pin labeled SCL is TX
+ *                           MISO is RX
+ */
+#define GPIO_USART3_RX	GPIO_USART3_RX_2
+#define GPIO_USART3_TX	GPIO_USART3_TX_2
+
+/* UART4:
+ *
+ * PA0 (TX) -- Labeled RSSI on the silkscreen is only broken out on a test pad
+ *             on the pro version. It's on a 2.54mm header on other versions
+ * PA1 (RX) -- Motor 5 out
+ */
+#define GPIO_UART4_RX	GPIO_UART4_RX_1
+#define GPIO_UART4_TX	GPIO_UART4_TX_1
+
+/* UART5:
+ *
+ * PC6 (TX) and PC7 (RX) are broken out on J10
+ */
+
+//#define GPIO_UART5_RX GPIO_UART5_RX_1
+//#define GPIO_UART5_TX GPIO_UART5_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX    GPIO_CAN1_RX_2
+#define GPIO_CAN1_TX    GPIO_CAN1_TX_2
+
+/* SPI1:
+ *  CS: PA4 -- configured in board_config.h
+ *  CLK: PA5
+ *  MISO: PA6
+ *  MOSI: PA7
+ */
+
+#define GPIO_SPI1_SCK  GPIO_SPI1_SCK_1
+#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
+
+/* SPI2:
+ *  SD Card
+ *  CS: PB12 -- configured in board_config.h
+ *  CLK: PB13
+ *  MISO: PB14
+ *  MOSI: PB15
+ */
+
+#define GPIO_SPI2_SCK	  GPIO_SPI2_SCK_2
+#define GPIO_SPI2_MISO	GPIO_SPI2_MISO_1
+#define GPIO_SPI2_MOSI	GPIO_SPI2_MOSI_1
+
+/* SPI3: SD CARD
+ *  CS: PC14 -- configured in board_config.h
+ *  CLK: PB3
+ *  MISO: PB4
+ *  MOSI: PB5
+ */
+
+#define GPIO_SPI3_SCK  GPIO_SPI3_SCK_1
+#define GPIO_SPI3_MISO GPIO_SPI3_MISO_1
+#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_1
+
+/*
+ * I2C (external)
+ *
+ * SCL: PB10
+ * SDA: PB11
+ *
+ * TODO:
+ *   The optional _GPIO configurations allow the I2C driver to manually
+ *   reset the bus to clear stuck slaves.  They match the pin configuration,
+ *   but are normally-high GPIOs.
+ */
+#define GPIO_I2C2_SCL		GPIO_I2C2_SCL_1
+#define GPIO_I2C2_SDA		GPIO_I2C2_SDA_1
+
+#endif  /* __CONFIG_M9NF4_INCLUDE_BOARD_H */

boards/matek/gnss-m9n-f4/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,85 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+/*
+|    DMA1    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
+|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
+| Channel 0  | SPI3_RX_1        | -                | SPI3_RX_2        | SPI2_RX          | SPI2_TX          | SPI3_TX_1        | -                | SPI3_TX_2        |
+| Channel 1  | I2C1_RX          | -                | TIM7_UP_1        |  -               | TIM7_UP_2        | I2C1_RX_1        | I2C1_TX          | I2C1_TX_1        |
+| Channel 2  | TIM4_CH1         | -                | I2C4_RX          | TIM4_CH2         | -                | I2C4_RX          | TIM4_UP          | TIM4_CH3         |
+| Channel 3  | -                | TIM2_UP_1        | I2C3_RX_1        | I2C2_EXT_RX      | I2C3_TX          | TIM2_CH1         | TIM2_CH2         | TIM2_UP_2        |
+|            |                  |   TIM2_CH3       |                  |                  |                  |                  |   TIM2_CH4_1     |   TIM2_CH4_2     |
+| Channel 4  | UART5_RX         | USART3_RX        | UART4_RX         | USART3_TX_1      | UART4_TX         | USART2_RX        | USART2_TX        | UART5_TX         |
+| Channel 5  | UART8_TX         | UART7_TX         | TIM3_CH4         | UART7_RX         | TIM3_CH1         | TIM3_CH2         | UART8_RX         | TIM3_CH3         |
+|            |                  |                  |   TIM3_UP        |                  |   TIM3_TRIG      |                  |                  |                  |
+| Channel 6  | TIM5_CH3         | TIM5_CH4_1       | TIM5_CH1         | TIM5_CH4_2       | TIM5_CH2         | -                | TIM5_UP_2        | -                |
+|            |   TIM5_UP_1      |   TIM5_TRIG_1    |                  |   TIM5_TRIG_2    |                  |                  |                  |                  |
+| Channel 7  | -                | TIM6_UP          | I2C2_RX          | I2C2_RX_1        | USART3_TX_2      | DAC1             | DAC2             | I2C2_TX          |
+|            |                  |                  |                  |                  |                  |                  |                  |                  |
+| Usage      |  SPI3_RX         | TIM2_UP_1        | UART4_RX         | SPI2_RX          | SPI2_TX          |                  |                  | SPI3_TX          |
+
+
+|    DMA2    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
+|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
+| Channel 0  | ADC1_1           | SAI1_A           | TIM8_CH1_1       | SAI1_A_1         | ADC1_2           | SAI1_B_1         | TIM1_CH1_1       | -                |
+|            |                  |                  |   TIM8_CH2_1     |                  |                  |                  |   TIM1_CH2_1     |                  |
+|            |                  |                  |   TIM8_CH3_1     |                  |                  |                  |   TIM1_CH3_1     |                  |
+| Channel 1  | -                | DCMI_1           | ADC2_1           | ADC2_2           | SAI1_B           | SPI6_TX          | SPI6_RX          | DCMI_2           |
+| Channel 2  | ADC3_1           | ADC3_2           | -                | SPI5_RX_1        | SPI5_TX_1        | CRYP_OUT         | CRYP_IN          | HASH_IN          |
+| Channel 3  | SPI1_RX_1        | -                | SPI1_RX_2        | SPI1_TX_1        | -                | SPI1_TX_2        | -                | QUADSPI          |
+| Channel 4  | SPI4_RX_1        | SPI4_TX_1        | USART1_RX_1      | SDIO             | -                | USART1_RX_2      | SDIO             | USART1_TX        |
+| Channel 5  | -                | USART6_RX_1      | USART6_RX_2      | SPI4_RX_2        | SPI4_TX_2        | -                | USART6_TX_1      | USART6_TX_2      |
+| Channel 6  | TIM1_TRIG_1      | TIM1_CH1_2       | TIM1_CH2_2       | TIM1_CH1         | TIM1_CH4         | TIM1_UP          | TIM1_CH3_2       | -                |
+|            |                  |                  |                  |                  |   TIM1_TRIG_2    |                  |                  |                  |
+|            |                  |                  |                  |                  |   TIM1_COM       |                  |                  |                  |
+| Channel 7  | -                | TIM8_UP          | TIM8_CH1_2       | TIM8_CH2_2       | TIM8_CH3_2       | SPI5_RX_2        | SPI5_TX_2        | TIM8_CH4         |
+|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_TRIG      |
+|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_COM       |
+|            |                  |                  |                  |                  |                  |                  |                  |                  |
+| Usage      | SPI1_RX_1        | USART6_RX_1      | USART1_RX_1      | SPI1_TX_1        |                  |                  |                  |                  |
+ */
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMAMAP_USART1_RX  DMAMAP_USART1_RX_1  // DMA2, Stream 2, Channel 4    (CONSOLE)
+//#define DMAMAP_UART4_RX DMAMAP_UART4_RX     // DMA1, Stream 2, Channel 4    (GPS)
+
+#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX     // DMA1, Stream 3, Channel 0    (SPI2 RX)
+#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX     // DMA1, Stream 4, Channel 0    (SPI2 TX)
+#define DMACHAN_SPI3_RX    DMAMAP_SPI3_RX_1   // DMA1, Stream 0, Channel 0    (SPI3 RX SD)
+#define DMACHAN_SPI3_TX    DMAMAP_SPI3_TX_2   // DMA1, Stream 7, Channel 0    (SPI3 TX SD)
+
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_1   // DMA2, Stream 0, Channel 3    (SPI1 RX)
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 3, Channel 3    (SPI1 TX)

boards/matek/gnss-m9n-f4/nuttx-config/nsh/defconfig

@@ -0,0 +1,195 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_SPI_CALLBACK is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+# CONFIG_STM32_DMACAPABLE is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/matek/gnss-m9n-f4/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F405RG=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_BULKIN_REQLEN=96
+CONFIG_CDCACM_PRODUCTID=0x1004
+CONFIG_CDCACM_PRODUCTSTR="Matekgnssm9nf4"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=2000
+CONFIG_CDCACM_VENDORID=0x120A
+CONFIG_CDCACM_VENDORSTR="PX4"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MM_REGIONS=2
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_DISABLE_IFCONFIG=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_DISABLE_TELNETD=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_MMCSDSPIPORTNO=3
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=131072
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SEM_NNESTPRIO=8
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SERIAL_PASSTHRU_UBLOX=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_FLASH_PREFETCH=y
+CONFIG_STM32_FLOWCONTROL_BROKEN=y
+CONFIG_STM32_I2C2=y
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_OTGFS=y
+CONFIG_STM32_OTGHS=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_RTC=y
+CONFIG_STM32_RTC_HSECLOCK=y
+CONFIG_STM32_RTC_MAGIC=0xfacefeee
+CONFIG_STM32_RTC_MAGIC_REG=1
+CONFIG_STM32_RTC_MAGIC_TIME_SET=0xfacefeef
+CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SPI1_DMA=y
+CONFIG_STM32_SPI1_DMA_BUFFER=1024
+CONFIG_STM32_SPI2=y
+CONFIG_STM32_SPI2_DMA=y
+CONFIG_STM32_SPI2_DMA_BUFFER=1024
+CONFIG_STM32_SPI3=y
+CONFIG_STM32_SPI3_DMA=y
+CONFIG_STM32_SPI3_DMA_BUFFER=512
+CONFIG_STM32_SPI_DMA=y
+CONFIG_STM32_SPI_DMATHRESHOLD=1024
+CONFIG_STM32_SYSCFG_IOCOMPENSATION=y
+CONFIG_STM32_TIM5=y
+CONFIG_STM32_UART4=y
+CONFIG_STM32_USART1=y
+CONFIG_STM32_USART3=y
+CONFIG_STM32_USART_BREAKS=y
+CONFIG_STM32_WWDG=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_BAUD=38400
+CONFIG_UART4_RXBUFSIZE=300
+CONFIG_UART4_RXDMA=y
+CONFIG_UART4_TXBUFSIZE=300
+CONFIG_USART1_RXBUFSIZE=300
+CONFIG_USART1_RXDMA=y
+CONFIG_USART1_SERIAL_CONSOLE=y
+CONFIG_USART1_TXBUFSIZE=300
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_DUALSPEED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"

boards/matek/gnss-m9n-f4/nuttx-config/scripts/canbootloader_script.ld

@@ -0,0 +1,137 @@
+/****************************************************************************
+ * configs/gnss-m9n-f4/scripts/ld.canbootloader
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F405RG has 1024Kb of FLASH beginning at address 0x0800:0000 and
+ * 192Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 32 KiB of flash is reserved for the bootloader.
+ * Paramater storage will use the next 32KiB Sector.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/matek/gnss-m9n-f4/nuttx-config/scripts/script.ld

@@ -0,0 +1,147 @@
+/****************************************************************************
+ * configs/gnss-m9n-f4/scripts/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F405RG has 1024Kb of FLASH beginning at address 0x0800:0000 and
+ * 192Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 32 KiB of flash is reserved for the bootloader.
+ * Paramater storage will use the next 32KiB Sector.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 960K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+                . = ALIGN(8);
+                /*
+                * This section positions the app_descriptor_t used
+                * by the make_can_boot_descriptor.py tool to set
+                * the application image's descriptor so that the
+                * uavcan bootloader has the ability to validate the
+                * image crc, size etc
+                */
+                KEEP(*(.app_descriptor))
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/matek/gnss-m9n-f4/src/CMakeLists.txt

@@ -0,0 +1,70 @@
+############################################################################
+#
+#   Copyright (c) 2018-2022 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
+
+	add_library(drivers_board
+		boot_config.h
+		boot.c
+		led.c
+		usb.c
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch
+			nuttx_drivers
+			canbootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
+
+else()
+	add_library(drivers_board
+		can.c
+		i2c.cpp
+		led.c
+		init.c
+		spi.cpp
+		timer_config.cpp
+		usb.c
+	)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_spi
+			nuttx_arch
+			nuttx_drivers
+			px4_layer
+			arch_io_pins
+			drivers__led
+	)
+endif()

boards/matek/gnss-m9n-f4/src/board_config.h

@@ -0,0 +1,146 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2014, 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * M9nf4 can internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+/* Configuration ************************************************************************************/
+
+/* Matek M9nf4can GPIOs ***********************************************************************************/
+/* LEDs */
+// LED1 - PA14 - blue
+// LED2 - PA13 - green
+
+#define GPIO_LED1       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN14)
+#define GPIO_LED_BLUE   GPIO_LED1
+
+#define GPIO_LED2       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTA|GPIO_PIN13)
+#define GPIO_LED_GREEN  GPIO_LED2
+
+/* Boot config */
+#define GPIO_BOOT_CONFIG      /* PB7 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTB|GPIO_PIN7|GPIO_EXTI)
+
+#define FLASH_BASED_PARAMS
+
+#define GPIO_CAN1_SILENT_S0  /* PC13  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing
+ */
+#define GPIO_OTGFS_VBUS		(GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|GPIO_OPENDRAIN|GPIO_PORTC|GPIO_PIN5)
+
+#define GPIO_I2C2_SCL_RESET   /* PB10  */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define GPIO_I2C2_SDA_RESET   /*  PB11 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN11)
+
+/* High-resolution timer */
+#define HRT_TIMER                    3 /* use timer 3 as HRT */
+#define HRT_TIMER_CHANNEL            4 /* use capture/compare channel 4 */
+
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
+/* This board provides a DMA pool and APIs */
+#define BOARD_DMA_ALLOC_POOL_SIZE 5120
+
+
+#define PX4_GPIO_INIT_LIST { \
+		GPIO_I2C2_SCL_RESET,              \
+		GPIO_I2C2_SDA_RESET,              \
+		GPIO_BOOT_CONFIG,                 \
+		GPIO_CAN1_TX,                     \
+		GPIO_CAN1_RX,                     \
+		GPIO_CAN1_SILENT_S0,              \
+		GPIO_OTGFS_VBUS                   \
+	}
+
+
+__BEGIN_DECLS
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+
+/****************************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to configure USB IO.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_usbinitialize(void);
+
+//extern void board_peripheral_reset(int ms);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS

boards/matek/gnss-m9n-f4/src/boot.c

@@ -0,0 +1,190 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *       Author: Ben Dyer <ben_dyer@mac.com>
+ *               Pavel Kirienko <pavel.kirienko@zubax.com>
+ *               David Sidrane <david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <px4_config.h>
+#include <stdint.h>
+#include "boot_config.h"
+#include "board.h"
+
+#include <debug.h>
+#include <string.h>
+#include <arch/board/board.h>
+
+#include "led.h"
+#include <nuttx/board.h>
+
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
+	stm32_configgpio(GPIO_CAN1_RX);
+	stm32_configgpio(GPIO_CAN1_TX);
+	stm32_configgpio(GPIO_CAN1_SILENT_S0);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+
+	//led_init();
+
+#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
+	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
+#endif
+
+}
+
+/************************************************************************************
+ * Name: board_deinitialize
+ *
+ * Description:
+ *   This function is called by the bootloader code prior to booting
+ *   the application. Is should place the HW into an benign initialized state.
+ *
+ ************************************************************************************/
+
+void board_deinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+}
+
+/****************************************************************************
+ * Name: board_get_product_name
+ *
+ * Description:
+ *   Called to retrieve the product name. The returned value is a assumed
+ *   to be written to a pascal style string that will be length prefixed
+ *   and not null terminated
+ *
+ * Input Parameters:
+ *    product_name - A pointer to a buffer to write the name.
+ *    maxlen       - The maximum number of charter that can be written
+ *
+ * Returned Value:
+ *   The length of characters written to the buffer.
+ *
+ ****************************************************************************/
+
+uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
+{
+	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
+}
+
+/****************************************************************************
+ * Name: board_get_hardware_version
+ *
+ * Description:
+ *   Called to retrieve the hardware version information. The function
+ *   will first initialize the the callers struct to all zeros.
+ *
+ * Input Parameters:
+ *    hw_version - A pointer to a uavcan_hardwareversion_t.
+ *
+ * Returned Value:
+ *   Length of the unique_id
+ *
+ ****************************************************************************/
+
+size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
+{
+	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
+
+	hw_version->major = HW_VERSION_MAJOR;
+	hw_version->minor = HW_VERSION_MINOR;
+
+	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
+}
+
+/****************************************************************************
+ * Name: board_indicate
+ *
+ * Description:
+ *   Provides User feedback to indicate the state of the bootloader
+ *   on board specific  hardware.
+ *
+ * Input Parameters:
+ *    indication - A member of the uiindication_t
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
+
+typedef begin_packed_struct struct led_t {
+	uint8_t red;
+	uint8_t green;
+	uint8_t blue;
+	uint8_t hz;
+} end_packed_struct led_t;
+
+static const  led_t i2l[] = {
+
+	led(0, off,                             0,     0,     0,     0),
+	led(1, reset,                          128,   128,   128,   30),
+	led(2, autobaud_start,                  0,   128,     0,     1),
+	led(3, autobaud_end,                    0,   128,     0,     2),
+	led(4, allocation_start,                0,     0,    64,     2),
+	led(5, allocation_end,                  0,   128,    64,     3),
+	led(6, fw_update_start,                32,   128,    64,     3),
+	led(7, fw_update_erase_fail,           32,   128,    32,     3),
+	led(8, fw_update_invalid_response,     64,     0,     0,     1),
+	led(9, fw_update_timeout,              64,     0,     0,     2),
+	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
+	led(b, jump_to_app,                     0,   128,     0,    10),
+
+};
+
+void board_indicate(uiindication_t indication)
+{
+	rgb_led(i2l[indication].red,
+		i2l[indication].green,
+		i2l[indication].blue,
+		i2l[indication].hz);
+}

boards/matek/gnss-m9n-f4/src/boot_config.h

@@ -0,0 +1,129 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/*
+ * @file boot_config.h
+ *
+ * bootloader definitions that configures the behavior and options
+ * of the Boot loader
+ * This file is relies on the parent folder's boot_config.h file and defines
+ * different usages of the hardware for bootloading
+ */
+
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+/* Bring in the board_config.h definitions
+ * todo:make this be pulled in from a targed's build
+ * files in nuttx*/
+
+#include "board_config.h"
+#include "uavcan.h"
+#include <nuttx/compiler.h>
+
+#include <stdint.h>
+
+#include <stm32_flash.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
+
+//todo:wrap OPT_x in in ifdefs for command line definitions
+#define OPT_TBOOT_MS                    5000
+#define OPT_NODE_STATUS_RATE_MS         800
+#define OPT_NODE_INFO_RATE_MS           50
+#define OPT_BL_NUMBER_TIMERS            7
+
+/*
+ *  This Option set is set to 1 ensure a provider of firmware has an
+ *  opportunity update the node's firmware.
+ *  This Option is the default policy and can be overridden by
+ *  a jumper
+ *  When this Policy is set, the node will ignore tboot and
+ *  wait indefinitely for a GetNodeInfo request before booting.
+ *
+ *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
+ *  the polarity of the jumper to be True Active
+ *
+ *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
+ *                                                 Jumper
+ *   yes           1                       0         x
+ *   yes           1                       1       Active
+ *   no            1                       1       Not Active
+ *   no            0                       0         X
+ *   yes           0                       1       Active
+ *   no            0                       1       Not Active
+ *
+ */
+#define OPT_WAIT_FOR_GETNODEINFO                    0
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 0
+#define OPT_ENABLE_WD           1
+
+#define OPT_RESTART_TIMEOUT_MS          20000
+
+/* Reserved for the Booloader */
+#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
+
+/* Reserved for the application out of the total
+ * system flash minus the BOOTLOADER_SIZE_IN_K
+ */
+#define OPT_APPLICATION_RESERVER_IN_K    0
+
+#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
+#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
+
+
+#define FLASH_BASE              STM32_FLASH_BASE
+#define FLASH_SIZE              STM32_FLASH_SIZE
+
+#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
+#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
+#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
+
+//* If this board uses big flash that have large sectors */
+
+#define OPT_USE_YIELD
+
+/* Bootloader Option*****************************************************************
+ *
+ */
+#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)

boards/matek/gnss-m9n-f4/src/can.c

@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_arch.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+#ifdef CONFIG_CAN
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+
+#endif

boards/matek/gnss-m9n-f4/src/i2c.cpp

@@ -0,0 +1,38 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2020-2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusExternal(2),
+};

boards/matek/gnss-m9n-f4/src/init.c

@@ -0,0 +1,203 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2012-2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * Matek M9NF4 CAN -specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialization.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <px4_platform_common/tasks.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+#include <syslog.h>
+
+#include <nuttx/board.h>
+#include <nuttx/spi/spi.h>
+#include <nuttx/i2c/i2c_master.h>
+#include <nuttx/mmcsd.h>
+#include <nuttx/analog/adc.h>
+
+#include <stm32.h>
+#include "board_config.h"
+#include <stm32_uart.h>
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_watchdog.h>
+
+#include "led.h"
+
+#include <systemlib/px4_macros.h>
+
+#include <px4_platform_common/init.h>
+
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_dma_alloc.h>
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void
+stm32_boardinitialize(void)
+{
+	watchdog_init();
+
+
+	/* configure LEDs */
+
+	board_autoled_initialize();
+
+	/* configure pins */
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	/* configure SPI all interfaces GPIO */
+
+	/* configure USB interfaces */
+
+	stm32_usbinitialize();
+
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+static struct spi_dev_s *spi3;
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	px4_platform_init();
+
+#if defined(SERIAL_HAVE_RXDMA)
+
+	/* set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event. */
+
+	static struct hrt_call serial_dma_call;
+	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
+#endif
+
+	/* configure the DMA allocator */
+
+	if (board_dma_alloc_init() < 0) {
+		syslog(LOG_ERR, "DMA alloc FAILED\n");
+	}
+
+
+	stm32_spiinitialize();
+
+
+	spi3 = stm32_spibus_initialize(CONFIG_NSH_MMCSDSPIPORTNO);
+
+	if (!spi3) {
+		syslog(LOG_ERR, "[boot] FAILED to initialize SPI port 3\n");
+		rgb_led(255, 0, 0, 0);
+		return -ENODEV;
+	}
+
+	int ret = mmcsd_spislotinitialize(CONFIG_NSH_MMCSDMINOR, CONFIG_NSH_MMCSDSLOTNO, spi3);
+
+	if (ret < 0) {
+		syslog(LOG_ERR, "[boot] Failed to bind SPI port 0 to SD slot 0\n");
+		rgb_led(255, 0, 0, 0);
+		return ret;
+	}
+
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{2, 16 * 1024, 0x08008000},
+		{3, 16 * 1024, 0x0800C000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+		rgb_led(255, 0, 0, 0);
+		return -ENODEV;
+	}
+
+#endif // FLASH_BASED_PARAMS
+
+	rgb_led(0, 255, 0, 0);
+
+	return OK;
+}

boards/matek/gnss-m9n-f4/src/led.c

@@ -0,0 +1,172 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "led.h"
+
+#define TMR_BASE        STM32_TIM1_BASE
+#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
+#define TMR_REG(o)      (TMR_BASE+(o))
+
+static uint32_t g_ledmap[] = {
+	GPIO_LED_BLUE,
+};
+
+void rgb_led(int r, int g, int b, int freqs)
+{
+
+	long fosc = TMR_FREQUENCY;
+	long prescale = 2048;
+	long p1s = fosc / prescale;
+	long p0p5s  = p1s / 2;
+	uint16_t val;
+	static bool once = 0;
+
+	if (!once) {
+		once = 1;
+
+		/* Enabel Clock to Block */
+		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
+
+		/* Reload */
+
+		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
+		val |= ATIM_EGR_UG;
+		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
+
+		/* Set Prescaler STM32_TIM_SETCLOCK */
+
+		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
+
+		/* Enable STM32_TIM_SETMODE*/
+
+		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
+			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
+		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
+			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
+			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
+
+
+		stm32_configgpio(GPIO_TIM1_CH1N_1);
+		stm32_configgpio(GPIO_TIM1_CH2N_1);
+		stm32_configgpio(GPIO_TIM1_CH3N_1);
+
+		/* master output enable = on */
+		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
+	}
+
+	long p  = freqs == 0 ? p1s : p1s / freqs;
+	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
+
+	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
+
+	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
+	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
+	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
+
+	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+	if (freqs == 0) {
+		val &= ~ATIM_CR1_CEN;
+
+	} else {
+		val |= ATIM_CR1_CEN;
+	}
+
+	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+}
+
+__EXPORT void led_init(void)
+{
+	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
+		stm32_configgpio(g_ledmap[l]);
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	if (led == 0) {
+		stm32_gpiowrite(g_ledmap[led], !state);
+	}
+}
+/*
+__EXPORT void board_autoled_on(int led) {
+	if (led == 1) {
+		stm32_gpiowrite(GPIO_LED1, false);
+	}
+}
+
+__EXPORT void board_autoled_off(int led) {
+	if (led == 1) {
+		stm32_gpiowrite(GPIO_LED1, true);
+	}
+}*/
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(led, true);
+}
+
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(led, false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+	if (led == 0) {
+		phy_set_led(led, !stm32_gpioread(g_ledmap[led]));
+	}
+}

boards/matek/gnss-m9n-f4/src/led.h

@@ -0,0 +1,41 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2015-2021 PX4 Development Team. All rights reserved.
+ *   Author: David Sidrane<david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+__BEGIN_DECLS
+void rgb_led(int r, int g, int b, int freqs);
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS

boards/matek/gnss-m9n-f4/src/spi.cpp

@@ -0,0 +1,50 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2018-2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI1, {
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM20602, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortC, GPIO::Pin4}),
+	}),
+	initSPIBus(SPI::Bus::SPI2, {
+		initSPIDevice(DRV_MAG_DEVTYPE_RM3100, SPI::CS{GPIO::PortB, GPIO::Pin12})
+	}),
+	initSPIBus(SPI::Bus::SPI3, {
+		initSPIDevice(DRV_DEVTYPE_UNUSED, SPI::CS{GPIO::PortC, GPIO::Pin14})
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/matek/gnss-m9n-f4/src/timer_config.cpp

@@ -0,0 +1,49 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2018-2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/io_timer_hw_description.h>
+
+constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
+	initIOTimer(Timer::Timer3, DMA{DMA::Index1, DMA::Stream2, DMA::Channel5}),
+	initIOTimer(Timer::Timer2, DMA{DMA::Index1, DMA::Stream1, DMA::Channel3}),
+};
+
+constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
+	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel4}, {GPIO::PortA, GPIO::Pin3}),
+	initIOTimerChannel(io_timers, {Timer::Timer2, Timer::Channel3}, {GPIO::PortA, GPIO::Pin2}),
+};
+
+//constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
+//	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/matek/gnss-m9n-f4/src/usb.c

@@ -0,0 +1,107 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2018-2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include <arm_arch.h>
+#include <stm32.h>
+#include "board_config.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the omnibusf4sd board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+	/* XXX We only support device mode
+	stm32_configgpio(GPIO_OTGFS_PWRON);
+	stm32_configgpio(GPIO_OTGFS_OVER);
+	*/
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	uinfo("resume: %d\n", resume);
+}

boards/matek/gnss-m9n-f4/uavcan_board_identity

@@ -0,0 +1,17 @@
+# UAVCAN boot loadable Module ID
+set(uavcanblid_sw_version_major 0)
+set(uavcanblid_sw_version_minor 1)
+add_definitions(
+	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
+	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
+)
+
+set(uavcanblid_hw_version_major 3)
+set(uavcanblid_hw_version_minor 246)
+set(uavcanblid_name "\"org.matek.gnss-m9n-f4\"")
+
+add_definitions(
+	-DHW_UAVCAN_NAME=${uavcanblid_name}
+	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
+	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
+)

boards/modalai/fc-v1/src/board_config.h

@@ -262,7 +262,6 @@
 
 #define BOARD_NUM_IO_TIMERS 5
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7};
 
 __BEGIN_DECLS
 

boards/modalai/fc-v2/src/board_config.h

@@ -199,7 +199,6 @@
  */
 #define DIRECT_PWM_OUTPUT_CHANNELS   8
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7};
 
 /* Power supply control and monitoring GPIOs */
 #define GPIO_nVDD_USB_VALID             /* PF13 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTF|GPIO_PIN13) /* Low for USB power, High for DC power */

boards/mro/ctrl-zero-h7-oem/src/board_config.h

@@ -157,7 +157,6 @@
 
 #define BOARD_NUM_IO_TIMERS 3
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7};
 
 #define BOARD_ENABLE_CONSOLE_BUFFER
 

boards/mro/ctrl-zero-h7/src/board_config.h

@@ -157,7 +157,6 @@
 
 #define BOARD_NUM_IO_TIMERS 3
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7};
 
 #define BOARD_ENABLE_CONSOLE_BUFFER
 

boards/mro/pixracerpro/src/board_config.h

@@ -146,7 +146,6 @@
 #define BOARD_ADC_BRICK_VALID   (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
 
 #define BOARD_NUM_IO_TIMERS 3
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5, 6, 7};
 #define BOARD_DMA_ALLOC_POOL_SIZE 5120 /* This board provides a DMA pool and APIs */
 #define BOARD_HAS_ON_RESET 1 /* This board provides the board_on_reset interface */
 #define BOARD_ENABLE_CONSOLE_BUFFER

boards/nxp/fmurt1062-v1/default.px4board

@@ -10,6 +10,7 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_LASER_I2C=y
+CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
@@ -25,6 +26,7 @@ CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_EVENTS=y
@@ -43,7 +45,6 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y

boards/nxp/fmurt1062-v1/src/CMakeLists.txt

@@ -46,7 +46,6 @@ px4_add_library(drivers_board
 	imxrt_flexspi_nor_boot.c
 	imxrt_flexspi_nor_flash.c
 )
-add_dependencies(drivers_board arch_board_hw_info)
 
 target_link_libraries(drivers_board
 	PRIVATE

boards/nxp/ucans32k146/src/CMakeLists.txt

@@ -45,7 +45,6 @@ if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
 			nuttx_arch
 			nuttx_drivers
 			canbootloader
-			arch_io_pins
 			arch_led_pwm
 	)
 	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
@@ -73,6 +72,6 @@ else()
 			nuttx_drivers # sdio
 			drivers__led # drv_led_start
 			px4_layer
-			arch_io_pins
+			px4_platform # I2CBusIterator
 		)
 endif()

boards/omnibus/f4sd/src/board_config.h

@@ -147,7 +147,6 @@
 #define BOARD_ENABLE_CONSOLE_BUFFER
 #define BOARD_CONSOLE_BUFFER_SIZE (1024*3)
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {0, 1, 3, 2};
 
 __BEGIN_DECLS
 

boards/px4/fmu-v2/src/board_config.h

@@ -158,7 +158,6 @@
 
 #define BOARD_HAS_ON_RESET 1
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5};
 
 __BEGIN_DECLS
 

boards/px4/fmu-v3/src/board_config.h

@@ -158,7 +158,6 @@
 
 #define BOARD_HAS_ON_RESET 1
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5};
 
 /* Internal IMU Heater
  *

boards/px4/fmu-v4/src/CMakeLists.txt

@@ -48,5 +48,4 @@ target_link_libraries(drivers_board
 		nuttx_arch # sdio
 		nuttx_drivers # sdio
 		px4_layer
-		arch_io_pins
 )

boards/px4/fmu-v4/src/board_config.h

@@ -179,7 +179,6 @@
 
 #define BOARD_HAS_ON_RESET 1
 
-#define BOARD_DSHOT_MOTOR_ASSIGNMENT {3, 2, 1, 0, 4, 5};
 
 __BEGIN_DECLS
 

boards/px4/fmu-v5/default.px4board

@@ -12,6 +12,7 @@ CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_COMMON_HYGROMETERS=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
@@ -81,8 +82,8 @@ CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_VMOUNT=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y

boards/px4/fmu-v5/nuttx-config/scripts/kernel-space.ld

@@ -0,0 +1,146 @@
+/****************************************************************************
+ * kernel-space.ld
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* NOTE:  This depends on the memory.ld script having been included prior to
+ * this script.
+ */
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+/*
+ * TODO: Fill in the signature location into TOC from user-space elf
+EXTERN(_main_toc)
+*/
+
+SECTIONS
+{
+    .text : {
+        _stext = ABSOLUTE(.);
+        *(.vectors)
+	. = ALIGN(32);
+	/*
+	This signature provides the bootloader with a way to delay booting
+	*/
+	_bootdelay_signature = ABSOLUTE(.);
+	FILL(0xffecc2925d7d05c5)
+	. += 8;
+        /*
+        *(.main_toc)
+        */
+        *(.text .text.*)
+        *(.fixup)
+        *(.gnu.warning)
+        *(.rodata .rodata.*)
+        *(.gnu.linkonce.t.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.got)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.r.*)
+        _etext = ABSOLUTE(.);
+    } > kflash
+
+    /*
+     * Init functions (static constructors and the like)
+     */
+    .init_section : {
+        _sinit = ABSOLUTE(.);
+	KEEP(*(.init_array .init_array.*))
+        _einit = ABSOLUTE(.);
+    } > kflash
+
+
+    .ARM.extab : {
+        *(.ARM.extab*)
+    } > kflash
+
+    __exidx_start = ABSOLUTE(.);
+    .ARM.exidx : {
+        *(.ARM.exidx*)
+    } > kflash
+
+    __exidx_end = ABSOLUTE(.);
+
+    _eronly = ABSOLUTE(.);
+
+    .data : {
+        _sdata = ABSOLUTE(.);
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        CONSTRUCTORS
+        _edata = ABSOLUTE(.);
+    } > ksram AT > kflash
+
+    .bss : {
+        _sbss = ABSOLUTE(.);
+        *(.bss .bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        . = ALIGN(4);
+        _ebss = ABSOLUTE(.);
+    } > ksram
+
+    /* Stabs debugging sections */
+
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+
+    .ramfunc : {
+        _sramfuncs = .;
+	*(.ramfunc  .ramfunc.*)
+	. = ALIGN(4);
+	_eramfuncs = .;
+    } > ksram AT > kflash
+
+    _framfuncs = LOADADDR(.ramfunc);
+}