Alexis Guijarro
f4f93118e6
mRo boards: Fix for USART clock selection
2024-08-09 11:59:38 -04:00
Niklas Hauser
cd231d0eed
fmuv6x: Add GPIO expander to check overcurrent pins
2024-08-08 13:14:11 -04:00
Julian Oes
2d99ae18ad
stm32h7: Reset USART clock selection ( #23498 )
...
This resets the USARTs' clock source selection to the default, in case
it has been changed by the bootloader.
This is required if booting from the ArduPilot bootloader which happens
to reset the clock selection to PLL.
Without this fix, UARTs (including the console) is garbled, so
presumably at an invalid baudrate.
2024-08-07 11:41:50 -04:00
Peter van der Perk
588eedb8cb
px4: sitl fix filepath regression ( #23457 )
2024-08-07 15:24:07 +02:00
chfriedrich98
33d99a13e8
differential: restructure and update module ( #23430 )
...
* differential: rename module
* differential: restructure and update module
2024-08-07 09:53:37 +02:00
Alexis Paques
abc629c2bb
zenoh: update zenoh-pico from 0.7.0 to 1.0.0 ( #23462 )
...
* Update Zenoh-pico from 0.7.0 to 1.0.0
* Update the zenoh-pico version to use PX4/dev/1.0.0-px4
* Remove the rostopic and rt/ prefix
* Unlike zenoh-bridge-dds we were using, zenoh-bridge-ros2dds is now adding the rt/ prefix automagically.
2024-08-02 11:48:55 -04:00
Peter van der Perk
4ca3e1b6e6
mr_canhubk3: add netman in default.px4board
2024-07-24 11:39:44 -04:00
Peter van der Perk
af36c0b6ec
mr_canhubk3: generate mtd_net when file is missing
2024-07-24 11:39:44 -04:00
Peter van der Perk
46e43ec725
Decouple filepaths from rcS/MTD
2024-07-24 11:39:44 -04:00
Daniel Agar
85de0ff227
boards: move ARK fmu-v6x/pi6x to dedicated RC drivers
2024-07-19 15:42:05 -04:00
Matthias Grob
f2bca92221
Fix duplicate newlines at the end of files
2024-07-19 14:33:36 +02:00
Matthias Grob
7f14110bb1
Fix missing newlines at the end of files
2024-07-19 14:33:36 +02:00
Daniel Agar
eac14b7db2
ekf2/commander: simplify navigation filter preflight checks
...
- remove commander test ratio "tuning knobs" (COM_ARM_EKF_{HGT,POS,VEL,YAW})
- these are effectively redundant with the actual tuning (noise & gate)
in the estimator, plus most users have no idea why they'd be
adjusting these other than to silence an annoying preflight complaint
- remove ekf2 "PreFlightChecker" with hard coded innovation limits
- ekf2 preflight innovation flags are now simply if any active source
exceeds half the limit preflight
2024-07-18 16:39:18 +02:00
Julian Oes
20137bea40
boards: add console build for Cube Orange(+)
...
This adds a build variant which enables the serial console, and
therefore disables the ADSB receiver.
2024-07-10 21:14:08 -04:00
Peter van der Perk
6bd81f38a6
imxrt dshot timing fix ( #23365 )
...
* imxrt: Change PLL settings for more accurate dshot timing
* Update NuttX submodule
2024-07-08 12:57:15 -04:00
Peter van der Perk
ac1effa32a
fmu-v6xrt: MTD use full FRAM (32KB)
2024-07-05 10:25:08 -04:00
Silvan Fuhrer
33701aa3d5
BatteryStatus: remove voltage_filtered_a
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-07-03 16:41:49 +02:00
Silvan Fuhrer
6d549811bc
fmu v3: disable GYRO_FFT to save flash
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-07-02 11:44:54 -04:00
alexklimaj
9cc4e2ac01
boards ark pi6x add vl53l0x
2024-06-26 17:09:37 -04:00
Daniel Agar
dcb1103299
ekf2: move estimator_status test ratios to filtered values
2024-06-20 13:41:54 -04:00
Daniel Agar
e33ba810e9
boards: px4_fmu-v5x_test disable differential_drive module to fix flash overflow
2024-06-18 18:48:13 -04:00
Daniel Agar
69a4a11c7f
boards: cuav/nora disable modules to fix flash overflow
2024-06-18 18:47:42 -04:00
PX4 BuildBot
ac13fb77a9
boards: update all NuttX defconfigs
2024-06-18 09:37:58 -04:00
PX4 BuildBot
42cdf41d60
update all px4board kconfig
2024-06-18 09:35:41 -04:00
Sihyun
1bc006b4f5
fmu-v6xrt: Fix redundant 'fi'
2024-06-17 17:26:22 -04:00
David Sidrane
1c657a59b1
px4_fmu-v5_stackcheck:Fit in flash
2024-06-17 15:21:30 -04:00
David Sidrane
f726c0e187
spracing_h7extreme:rcc Tack upstream name fix
2024-06-17 15:21:30 -04:00
Silvan Fuhrer
c0d693bc50
v5_stackcheck: disable CONFIG_DRIVERS_TONE_ALARM
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-06-17 12:26:53 -04:00
Thomas Frans
cd4c495377
drivers/gps: extract Septentrio into new standalone drivers/gnss/septentrio module ( #22904 )
...
Having a generic interface over the GPS drivers makes dedicated
functionality for each driver harder. Move the Septentrio driver into
its own module under the `gnss` driver directory, and let it have its
own parameters for only the functionality it requires. This also helps
with adding new features because they only need to be implemented for
the driver that wants it, simplifying testing.
2024-06-17 12:25:24 -04:00
Jacob Dahl
96360f3069
boards: fmu-v5: disable FAKE_GPS and SD_BENCH
2024-06-17 12:01:13 -04:00
Silvan Fuhrer
3cbe2ae2b3
v5_default: remove Local Position Estimator from default build
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-06-14 10:52:02 -04:00
Silvan Fuhrer
f4e76cd392
remove deprecated BAT_ params ( #22872 )
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-06-14 14:42:32 +02:00
Hubert
f8a42bcd58
boards: add new board micoair h743
2024-06-13 14:27:33 -04:00
Alex Klimaj
1d8e8a1d8b
boards: ark septentrio change safety led to open drain ( #23247 )
2024-06-10 11:04:55 -08:00
Ruoyu Wang
b9aa8818a4
kakute f7/h7/h7mini/h7v2: fix EKF2_IMU_CTRL typo
2024-06-10 11:08:33 +02:00
Beat Küng
52ac9336c4
boards: change default IP from 192.168.0.3 to 10.41.10.2
...
192.168.0.x is often used by routers for WIFI/ethernet networks, and thus
can create conflicts.
This can happen for example if a companion is connected to the FMU via
ethernet and at the same time connects to a WIFI network as DHCP client.
2024-06-10 11:05:50 +02:00
Beat Küng
a90cdcfe80
boards/px4/fmu-v{5,6}x: enable uxrce_dds_client on ethernet by default
2024-06-10 11:05:50 +02:00
Beat Küng
2524ac8c2b
boards/px4/fmu-v{5,6}x: do not enable mavlink on ethernet for skynode
2024-06-10 11:05:50 +02:00
chfriedrich98
5c64a3ed93
Rover Ackermann module ( #23024 )
...
New module handling Ackermann rover guidance and control.
Only enabled in SITL and in the rover builds for now.
2024-06-07 17:15:12 +02:00
Julian Oes
f6b65e68cc
boards: update all bootloaders
2024-06-07 13:16:17 +12:00
Daniel Agar
bfe3c86aeb
ekf2: merge mag yaw angle observability into heading consistency
...
- the additional hyteresis logic for "yaw angle observable" was
needed when it controlled time dependent mag_3d
2024-06-06 10:07:31 -04:00
Alex Klimaj
36ec576c0f
boards: ark-pi6x remove ekf delay param defaults ( #23177 )
2024-06-03 17:52:17 -08:00
Peter van der Perk
c22f725d85
fmu-v6xrt: Support RC telemetry
2024-06-03 08:31:18 -04:00
Peter van der Perk
7fab93ede8
fmu-v6xrt: Fix flash configuration
...
Fixes correct dummy cycle count of 20
2024-06-03 08:26:48 -04:00
Peter van der Perk
3874b4c55d
imxrt: move flexio irq handler to itcm
2024-05-30 04:56:42 -04:00
Peter van der Perk
b0cb697f71
imxrt: dshot add 1060 support and use channels instead of timers
2024-05-30 04:56:42 -04:00
Peter van der Perk
2de0af52e8
px4_fmuv6xrt: bidirectional dshot driver
2024-05-30 04:56:42 -04:00
Peize-Liu
2f4d6b6fac
[Fix][hkust_nxt-dual]:board hkust_nxt-dual fix hw_config.h missing APP_RESERVATION_SIZE param ( #23204 )
2024-05-30 10:35:04 +02:00
Daniel Agar
f3d152741c
boards: sky-drones_smartap-airlink_default disable gyro_fft module to save flash
2024-05-29 20:38:49 -04:00
Daniel Agar
b36f47535e
boards: px4_fmu-v6c_default disable gyro_fft module to save flash
2024-05-29 20:38:49 -04:00
