Merge branch 'pr-MCP23017' of github.com:PX4/PX4-Autopilot into pr-MCP23017

** add PPS time corection capability for GNSS measurements

* * add documentation
* add comment for 'future check'
* replace url with relative link
* Update docs/en/advanced/pps_time_sync.md

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
* Subedit and add to sidebar
* Apply suggestions from code review
* Update docs/en/SUMMARY.md
* remove offset jump check, clean up
* add comment pps_compensation activation condition. move documentation to hardware integration

---------

Co-authored-by: Hamish Willee <hamishwillee@gmail.com>
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>

.github/workflows/dev_container.yml

@@ -130,8 +130,8 @@ jobs:
           load: false
           push: ${{ startsWith(github.ref, 'refs/tags/') || (github.event_name == 'workflow_dispatch' && github.event.inputs.deploy_to_registry) }}
           provenance: false
-          cache-from: type=gha,version=1
-          cache-to: type=gha,version=1,mode=max
+          cache-from: type=gha,version=1,scope=${{ matrix.arch }}
+          cache-to: type=gha,version=1,mode=max,scope=${{ matrix.arch }}
 
   deploy:
     name: Deploy To Registry

.github/workflows/itcm_check.yml

@@ -41,6 +41,10 @@ jobs:
             scripts: >
               boards/nxp/tropic-community/nuttx-config/scripts/itcm_functions_includes.ld
               boards/nxp/tropic-community/nuttx-config/scripts/itcm_static_functions.ld
+          - target: nxp_mr-tropic
+            scripts: >
+              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_functions_includes.ld
+              boards/nxp/mr-tropic/nuttx-config/scripts/itcm_static_functions.ld
     steps:
       - uses: actions/checkout@v4
         with:

.vscode/cmake-variants.yaml

@@ -141,6 +141,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_can-flow_canbootloader
+    ark_can-flow-mr_default:
+      short: ark_can-flow-mr_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_can-flow-mr_default
     ark_can-flow-mr_canbootloader:
       short: ark_can-flow-mr_canbootloader
       buildType: MinSizeRel
@@ -236,6 +241,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_fpv_default
+    ark_mag_canbootloader:
+      short: ark_mag_canbootloader
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: ark_mag_canbootloader
+    ark_mag_default:
+      short: ark_mag_default
+      buildType: MiniSizeRel
+      settings:
+        CONFIG: ark_mag_default
     ark_pi6x_bootloader:
       short: ark_pi6x_bootloader
       buildType: MinSizeRel
@@ -406,6 +421,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: micoair_h743-v2_default
+    micoair_h743-lite_bootloader:
+      short: micoair_h743-lite_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-lite_bootloader
+    micoair_h743-lite_default:
+      short: micoair_h743-lite
+      buildType: MinSizeRel
+      settings:
+        CONFIG: micoair_h743-lite_default
     modalai_fc-v1_default:
       short: modalai_fc-v1
       buildType: MinSizeRel
@@ -456,6 +481,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: nxp_mr-canhubk3_fmu
+    nxp_mr-tropic_default:
+      short: nxp_mr-tropic_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_mr-tropic_default
+    nxp_mr-tropic_bootloader:
+      short: nxp_mr-tropic_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: nxp_mr-tropic_bootloader
     nxp_tropic-community_default:
       short: nxp_tropic-community_default
       buildType: MinSizeRel
@@ -486,3 +521,13 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: x-mav_ap-h743v2_default
+    svehicle_e2_bootloader:
+      short: svehicle_e2_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: svehicle_e2_bootloader
+    svehicle_e2_default:
+      short: svehicle_e2
+      buildType: MinSizeRel
+      settings:
+        CONFIG: svehicle_e2_default

LICENSE

@@ -1,6 +1,6 @@
 BSD 3-Clause License
 
-Copyright (c) 2012 - 2023, PX4 Development Team
+Copyright (c) 2012 - 2025, PX4 Development Team
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without

Makefile

@@ -346,6 +346,7 @@ bootloaders_update: \
         micoair_h743_bootloader \
         micoair_h743-aio_bootloader \
 	micoair_h743-v2_bootloader \
+	micoair_h743-lite_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \

ROMFS/px4fmu_common/init.d-posix/airframes/10041_sihsim_airplane

@@ -27,7 +27,6 @@ param set-default SIH_KDV 0.2
 param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
 param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1030_gazebo-classic_plane

@@ -44,8 +44,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1031_gazebo-classic_plane_cam

@@ -46,8 +46,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1032_gazebo-classic_plane_catapult

@@ -46,8 +46,6 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1033_jsbsim_rascal

@@ -31,8 +31,6 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1034_flightgear_rascal-electric

@@ -31,8 +31,6 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1035_gazebo-classic_techpod

@@ -30,8 +30,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1036_jsbsim_malolo

@@ -31,8 +31,6 @@ param set-default NAV_DLL_ACT 2
 param set-default RWTO_TKOFF 1
 param set-default RWTO_PSP 8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1037_gazebo-classic_believer

@@ -38,8 +38,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1038_gazebo-classic_glider

@@ -44,8 +44,6 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1039_flightgear_rascal

@@ -35,8 +35,6 @@ param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1039_gazebo-classic_advanced_plane

@@ -35,8 +35,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/1044_gazebo-classic_plane_lidar

@@ -46,8 +46,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/17001_flightgear_tf-g1

@@ -43,8 +43,6 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/17002_flightgear_tf-g2

@@ -48,8 +48,6 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/4003_gz_rc_cessna

@@ -53,8 +53,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default COM_PREARM_MODE 2
 
 param set-default CA_ROTOR_COUNT 1

ROMFS/px4fmu_common/init.d-posix/airframes/4008_gz_advanced_plane

@@ -48,8 +48,6 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 
 param set-default CA_SV_CS_COUNT 6

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -14,7 +14,6 @@
 
 param set UAVCAN_ENABLE 0
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d/airframes/17002_TF-AutoG2

@@ -40,8 +40,6 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d/airframes/17003_TF-G2

@@ -37,8 +37,6 @@ param set-default FW_P_LIM_MAX 25
 param set-default FW_P_LIM_MIN -5
 param set-default FW_P_RMAX_NEG 20
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 

ROMFS/px4fmu_common/init.d/airframes/2100_standard_plane

@@ -10,7 +10,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.3
 param set-default CA_SV_CS_COUNT 4

ROMFS/px4fmu_common/init.d/airframes/2106_albatross

@@ -32,7 +32,6 @@ param set-default FW_WR_IMAX 0.8
 param set-default FW_WR_P 1
 param set-default FW_W_RMAX 0
 
-param set-default CA_AIRFRAME 1
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_SV_CS_COUNT 7
 param set-default CA_SV_CS0_TRQ_R -0.5

ROMFS/px4fmu_common/init.d/airframes/3000_generic_wing

@@ -10,8 +10,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default CA_AIRFRAME 1
-
 param set-default CA_ROTOR_COUNT 1
 param set-default CA_ROTOR0_PX 0.15
 param set-default CA_SV_CS_COUNT 2

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -10,6 +10,8 @@ set VEHICLE_TYPE fw
 # MAV_TYPE_FIXED_WING 1
 param set-default MAV_TYPE 1
 
+param set-default CA_AIRFRAME 1
+
 #
 # Default parameters for fixed wing UAVs.
 #
@@ -26,6 +28,7 @@ param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_REQ_EPH 10
 param set-default EKF2_REQ_EPV 10
 param set-default EKF2_REQ_HDRIFT 0.5
+param set-default EKF2_REQ_PDOP 4
 param set-default EKF2_REQ_SACC 1
 param set-default EKF2_REQ_VDRIFT 1
 param set-default EKF2_RNG_QLTY_T 3

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -154,6 +154,12 @@ then
 	fi
 fi
 
+# Microchip MCP9808 temperature sensor external I2C
+if param compare -s SENS_EN_MCP9808 1
+then
+	mcp9808 start -X
+fi
+
 # TE MS4515 differential pressure sensor external I2C
 if param compare -s SENS_EN_MS4515 1
 then
@@ -219,6 +225,12 @@ then
 	pcf8583 start -X -a 0x51
 fi
 
+# ADC sensor ADS7953 external SPI
+if param compare -s ADC_ADS7953_EN 1
+then
+	ads7953 start -S
+fi
+
 # probe for optional external I2C devices
 if param compare SENS_EXT_I2C_PRB 1
 then

Tools/astyle/astylerc

@@ -15,4 +15,4 @@ ignore-exclude-errors-x
 lineend=linux
 exclude=EASTL
 add-brackets
-max-code-length=120
+max-code-length=140

Tools/px4moduledoc/srcparser.py

@@ -15,7 +15,7 @@ class ModuleDocumentation(object):
     # TOC in https://github.com/PX4/PX4-Autopilot/blob/main/docs/en/SUMMARY.md
     valid_categories = ['driver', 'estimator', 'controller', 'system',
                         'communication', 'command', 'template', 'simulation', 'autotune']
-    valid_subcategories = ['', 'camera', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
+    valid_subcategories = ['', 'adc', 'camera', 'distance_sensor', 'imu', 'ins', 'airspeed_sensor',
                            'magnetometer', 'baro', 'optical_flow', 'radio_control','rpm_sensor', 'transponder']
 
     max_line_length = 80 # wrap lines that are longer than this

boards/ark/can-flow-mr/default.px4board

@@ -0,0 +1,30 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_NO_HELP=y
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y
+CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42653=y
+CONFIG_DRIVERS_OPTICAL_FLOW_PAA3905=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_UAVCANNODE_FLOW_MEASUREMENT=y
+CONFIG_UAVCANNODE_RANGE_SENSOR_MEASUREMENT=y
+CONFIG_UAVCANNODE_RAW_IMU=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_ACCELERATION is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
+# CONFIG_SENSORS_VEHICLE_MAGNETOMETER is not set
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/ark/can-flow-mr/init/rc.board_sensors

@@ -8,9 +8,8 @@ param set-default SENS_FLOW_RATE 150
 param set-default SENS_IMU_CLPNOTI 0
 
 param set-default SENS_AFBR_S_RATE 25
-param set-default SENS_AFBR_L_RATE 10
-param set-default SENS_AFBR_THRESH 8
-param set-default SENS_AFBR_HYSTER 2
+param set-default SENS_AFBR_L_RATE 5
+param set-default SENS_AFBR_MODE 1
 
 # Internal SPI
 paa3905 -s start -Y 180

boards/ark/fmu-v6x/default.px4board

@@ -19,6 +19,7 @@ CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_AUAV=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y

boards/ark/fmu-v6x/init/rc.board_sensors

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# ARK FMUARKV6X specific board sensors init
+# ARK FMU V6X specific board sensors init
 #------------------------------------------------------------------------------
 set HAVE_PM2 yes
 set HAVE_PM3 yes
@@ -69,28 +69,25 @@ fi
 
 if ver hwtypecmp ARKV6X000
 then
-	# Internal SPI bus IIM42652 with SPIX measured frequency of 32.051kHz
-	iim42652 -R 3 -s -b 1 -C 32051 start
+	# Internal SPI bus IIM42652
+	iim42652 -R 3 -s -b 1 start
 
-	# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
-	icm42688p -R 9 -s -b 2 -C 32051 start
+	# Internal SPI bus ICM42688p
+	icm42688p -R 9 -s -b 2 start
 
-	# Internal SPI bus ICM42688p with SPIX measured frequency of 32.051kHz
-	icm42688p -R 6 -s -b 3 -C 32051 start
+	# Internal SPI bus ICM42688p
+	icm42688p -R 6 -s -b 3 start
 fi
 
 if ver hwtypecmp ARKV6X001
 then
-	# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
-	#iim42653 -R 3 -s -b 1 -C 32051 start
+	# Internal SPI bus IIM42653
 	iim42653 -R 3 -s -b 1 start
 
-	# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
-	#iim42653 -R 9 -s -b 2 -C 32051 start
+	# Internal SPI bus IIM42653
 	iim42653 -R 9 -s -b 2 start
 
-	# Internal SPI bus IIM42653 with SPIX measured frequency of 32.051kHz
-	#iim42653 -R 6 -s -b 3 -C 32051 start
+	# Internal SPI bus IIM42653
 	iim42653 -R 6 -s -b 3 start
 fi
 

boards/ark/fmu-v6x/src/CMakeLists.txt

@@ -57,8 +57,6 @@ else()
 		mtd.cpp
 		sdio.c
 		spi.cpp
-		spix_sync.c
-		spix_sync.h
 		timer_config.cpp
 		usb.c
 	)

boards/ark/fmu-v6x/src/board_config.h

@@ -241,7 +241,7 @@
 
 /* PWM
  */
-#define DIRECT_PWM_OUTPUT_CHANNELS   8
+#define DIRECT_PWM_OUTPUT_CHANNELS   9
 
 #define GPIO_FMU_CH1                    /* PI0  */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTI|GPIO_PIN0)
 #define GPIO_FMU_CH2                    /* PH12 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTH|GPIO_PIN12)
@@ -482,7 +482,7 @@
 #define PX4_I2C_BUS_MTD      4,5
 
 
-#define BOARD_NUM_IO_TIMERS  3
+#define BOARD_NUM_IO_TIMERS  4
 #define BOARD_SPIX_SYNC_FREQ 32000
 
 __BEGIN_DECLS

boards/ark/fmu-v6x/src/init.c

@@ -46,7 +46,6 @@
  ****************************************************************************/
 
 #include "board_config.h"
-#include "spix_sync.h"
 
 #include <stdbool.h>
 #include <stdio.h>
@@ -290,9 +289,5 @@ __EXPORT int board_app_initialize(uintptr_t arg)
 
 #endif /* CONFIG_MMCSD */
 
-	/* Configure the SPIX_SYNC output */
-	spix_sync_servo_init(BOARD_SPIX_SYNC_FREQ);
-	spix_sync_servo_set(0, 150);
-
 	return OK;
 }

boards/ark/fmu-v6x/src/spix_sync.c

@@ -1,309 +0,0 @@
-/****************************************************************************
- *
- *   Copyright (C) 2023 PX4 Development Team. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- * 3. Neither the name Airmind nor the names of its contributors may be
- *    used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
- * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
- * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- ****************************************************************************/
-
-/**
-* @file spix_sync.c
-*
-*
-*/
-
-#include <px4_platform_common/px4_config.h>
-
-#include <board_config.h>
-
-#include <sys/types.h>
-#include <stdint.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdbool.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdio.h>
-#include <ctype.h>
-
-
-#include <perf/perf_counter.h>
-#include <systemlib/err.h>
-#include <systemlib/px4_macros.h>
-
-#include <px4_arch/io_timer.h>
-
-#include "spix_sync.h"
-
-#define REG(_tmr, _reg) (*(volatile uint32_t *)(spix_sync_timers[_tmr].base + _reg))
-
-#define rCR1(_tmr)      REG(_tmr, STM32_GTIM_CR1_OFFSET)
-#define rCR2(_tmr)      REG(_tmr, STM32_GTIM_CR2_OFFSET)
-#define rSMCR(_tmr)     REG(_tmr, STM32_GTIM_SMCR_OFFSET)
-#define rDIER(_tmr)     REG(_tmr, STM32_GTIM_DIER_OFFSET)
-#define rSR(_tmr)       REG(_tmr, STM32_GTIM_SR_OFFSET)
-#define rEGR(_tmr)      REG(_tmr, STM32_GTIM_EGR_OFFSET)
-#define rCCMR1(_tmr)    REG(_tmr, STM32_GTIM_CCMR1_OFFSET)
-#define rCCMR2(_tmr)    REG(_tmr, STM32_GTIM_CCMR2_OFFSET)
-#define rCCER(_tmr)     REG(_tmr, STM32_GTIM_CCER_OFFSET)
-#define rCNT(_tmr)      REG(_tmr, STM32_GTIM_CNT_OFFSET)
-#define rPSC(_tmr)      REG(_tmr, STM32_GTIM_PSC_OFFSET)
-#define rARR(_tmr)      REG(_tmr, STM32_GTIM_ARR_OFFSET)
-#define rCCR1(_tmr)     REG(_tmr, STM32_GTIM_CCR1_OFFSET)
-#define rCCR2(_tmr)     REG(_tmr, STM32_GTIM_CCR2_OFFSET)
-#define rCCR3(_tmr)     REG(_tmr, STM32_GTIM_CCR3_OFFSET)
-#define rCCR4(_tmr)     REG(_tmr, STM32_GTIM_CCR4_OFFSET)
-#define rDCR(_tmr)      REG(_tmr, STM32_GTIM_DCR_OFFSET)
-#define rDMAR(_tmr)     REG(_tmr, STM32_GTIM_DMAR_OFFSET)
-#define rBDTR(_tmr)     REG(_tmr, STM32_ATIM_BDTR_OFFSET)
-
-#define BOARD_SPIX_SYNC_PWM_FREQ 1024000
-
-unsigned
-spix_sync_timer_get_period(unsigned timer)
-{
-	return (rARR(timer));
-}
-
-static void spix_sync_timer_init_timer(unsigned timer, unsigned rate)
-{
-	if (spix_sync_timers[timer].base) {
-
-		irqstate_t flags = px4_enter_critical_section();
-
-		/* enable the timer clock before we try to talk to it */
-
-		modifyreg32(spix_sync_timers[timer].clock_register, 0, spix_sync_timers[timer].clock_bit);
-
-		/* disable and configure the timer */
-		rCR1(timer) = 0;
-		rCR2(timer) = 0;
-		rSMCR(timer) = 0;
-		rDIER(timer) = 0;
-		rCCER(timer) = 0;
-		rCCMR1(timer) = 0;
-		rCCMR2(timer) = 0;
-		rCCR1(timer) = 0;
-		rCCR2(timer) = 0;
-		rCCR3(timer) = 0;
-		rCCR4(timer) = 0;
-		rCCER(timer) = 0;
-		rDCR(timer) = 0;
-
-		if ((spix_sync_timers[timer].base == STM32_TIM1_BASE) || (spix_sync_timers[timer].base == STM32_TIM8_BASE)) {
-
-			/* master output enable = on */
-
-			rBDTR(timer) = ATIM_BDTR_MOE;
-		}
-
-		/* If the timer clock source provided as clock_freq is the STM32_APBx_TIMx_CLKIN
-		 * then configure the timer to free-run at 1MHz.
-		 * Otherwise, other frequencies are attainable by adjusting .clock_freq accordingly.
-		 */
-
-		rPSC(timer) = (spix_sync_timers[timer].clock_freq / BOARD_SPIX_SYNC_PWM_FREQ) - 1;
-
-		/* configure the timer to update at the desired rate */
-
-		rARR(timer) = (BOARD_SPIX_SYNC_PWM_FREQ / rate) - 1;
-
-		/* generate an update event; reloads the counter and all registers */
-		rEGR(timer) = GTIM_EGR_UG;
-
-		px4_leave_critical_section(flags);
-	}
-
-}
-
-void spix_sync_channel_init(unsigned channel)
-{
-	/* Only initialize used channels */
-
-	if (spix_sync_channels[channel].timer_channel) {
-
-		unsigned timer = spix_sync_channels[channel].timer_index;
-
-		/* configure the GPIO first */
-		px4_arch_configgpio(spix_sync_channels[channel].gpio_out);
-
-		uint16_t polarity = spix_sync_channels[channel].masks;
-
-		/* configure the channel */
-		switch (spix_sync_channels[channel].timer_channel) {
-		case 1:
-			rCCMR1(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR1_OC1M_SHIFT) | GTIM_CCMR1_OC1PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC1E;
-			break;
-
-		case 2:
-			rCCMR1(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR1_OC2M_SHIFT) | GTIM_CCMR1_OC2PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC2E;
-			break;
-
-		case 3:
-			rCCMR2(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR2_OC3M_SHIFT) | GTIM_CCMR2_OC3PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC3E;
-			break;
-
-		case 4:
-			rCCMR2(timer) |= (GTIM_CCMR_MODE_PWM1 << GTIM_CCMR2_OC4M_SHIFT) | GTIM_CCMR2_OC4PE;
-			rCCER(timer) |= polarity | GTIM_CCER_CC4E;
-			break;
-		}
-	}
-}
-
-int
-spix_sync_servo_set(unsigned channel, uint8_t  cvalue)
-{
-	if (channel >= arraySize(spix_sync_channels)) {
-		return -1;
-	}
-
-	unsigned timer = spix_sync_channels[channel].timer_index;
-
-	/* test timer for validity */
-	if ((spix_sync_timers[timer].base == 0) ||
-	    (spix_sync_channels[channel].gpio_out == 0)) {
-		return -1;
-	}
-
-	unsigned period = spix_sync_timer_get_period(timer);
-
-	unsigned value = (unsigned)cvalue * period / 255;
-
-	/* configure the channel */
-	if (value > 0) {
-		value--;
-	}
-
-
-	switch (spix_sync_channels[channel].timer_channel) {
-	case 1:
-		rCCR1(timer) = value;
-		break;
-
-	case 2:
-		rCCR2(timer) = value;
-		break;
-
-	case 3:
-		rCCR3(timer) = value;
-		break;
-
-	case 4:
-		rCCR4(timer) = value;
-		break;
-
-	default:
-		return -1;
-	}
-
-	return 0;
-}
-
-unsigned spix_sync_servo_get(unsigned channel)
-{
-	if (channel >= 3) {
-		return 0;
-	}
-
-	unsigned timer = spix_sync_channels[channel].timer_index;
-	uint16_t value = 0;
-
-	/* test timer for validity */
-	if ((spix_sync_timers[timer].base == 0) ||
-	    (spix_sync_channels[channel].timer_channel == 0)) {
-		return 0;
-	}
-
-	/* configure the channel */
-	switch (spix_sync_channels[channel].timer_channel) {
-	case 1:
-		value = rCCR1(timer);
-		break;
-
-	case 2:
-		value = rCCR2(timer);
-		break;
-
-	case 3:
-		value = rCCR3(timer);
-		break;
-
-	case 4:
-		value = rCCR4(timer);
-		break;
-	}
-
-	unsigned period = spix_sync_timer_get_period(timer);
-	return ((value + 1) * 255 / period);
-}
-
-int spix_sync_servo_init(unsigned rate)
-{
-	/* do basic timer initialisation first */
-	for (unsigned i = 0; i < arraySize(spix_sync_timers); i++) {
-		spix_sync_timer_init_timer(i, rate);
-	}
-
-	/* now init channels */
-	for (unsigned i = 0; i < arraySize(spix_sync_channels); i++) {
-		spix_sync_channel_init(i);
-	}
-
-	spix_sync_servo_arm(true);
-	return OK;
-}
-
-void
-spix_sync_servo_deinit(void)
-{
-	/* disable the timers */
-	spix_sync_servo_arm(false);
-}
-void
-spix_sync_servo_arm(bool armed)
-{
-	/* iterate timers and arm/disarm appropriately */
-	for (unsigned i = 0; i < arraySize(spix_sync_timers); i++) {
-		if (spix_sync_timers[i].base != 0) {
-			if (armed) {
-				/* force an update to preload all registers */
-				rEGR(i) = GTIM_EGR_UG;
-
-				/* arm requires the timer be enabled */
-				rCR1(i) |= GTIM_CR1_CEN | GTIM_CR1_ARPE;
-
-			} else {
-				rCR1(i) = 0;
-			}
-		}
-	}
-}

boards/ark/fmu-v6x/src/timer_config.cpp

@@ -60,8 +60,7 @@ constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
 	initIOTimer(Timer::Timer5, DMA{DMA::Index1}),
 	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
 	initIOTimer(Timer::Timer12),
-	//initIOTimer(Timer::Timer1),
-	//initIOTimer(Timer::Timer2),
+	initIOTimer(Timer::Timer1),
 };
 
 constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
@@ -73,18 +72,8 @@ constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
 	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
 	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel1}, {GPIO::PortH, GPIO::Pin6}),
 	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel2}, {GPIO::PortH, GPIO::Pin9}),
-	//initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
-	//initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
 };
 
 constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
 	initIOTimerChannelMapping(io_timers, timer_io_channels);
-
-
-constexpr io_timers_t spix_sync_timers[MAX_SPIX_SYNC_TIMERS] = {
-	initIOTimer(Timer::Timer1),
-};
-
-constexpr timer_io_channels_t spix_sync_channels[MAX_SPIX_SYNC_TIMERS] = {
-	initIOTimerChannel(spix_sync_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
-};

boards/ark/mag/canbootloader.px4board

@@ -0,0 +1,5 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT=""
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y

boards/ark/mag/default.px4board

@@ -0,0 +1,22 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_DRIVERS_BOOTLOADERS=y
+CONFIG_DRIVERS_MAGNETOMETER_RM3100=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_DRIVERS_UAVCANNODE=y
+CONFIG_UAVCANNODE_MAGNETIC_FIELD_STRENGTH=y
+CONFIG_MODULES_SENSORS=y
+# CONFIG_SENSORS_VEHICLE_AIRSPEED is not set
+# CONFIG_SENSORS_VEHICLE_AIR_DATA is not set
+# CONFIG_SENSORS_VEHICLE_GPS_POSITION is not set
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/ark/mag/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 93,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the ARK MAG board",
+    "image": "",
+    "build_time": 0,
+    "summary": "ARKMAG",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 2080768,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/ark/mag/init/rc.board_sensors

@@ -0,0 +1,6 @@
+#!/bin/sh
+#
+# board sensors init
+#------------------------------------------------------------------------------
+
+rm3100 -s -b 2 start

boards/ark/mag/nuttx-config/canbootloader/defconfig

@@ -0,0 +1,57 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/mag/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=4096
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BINFMT_DISABLE=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=0
+CONFIG_NUNGET_CHARS=0
+CONFIG_PREALLOC_TIMERS=0
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_DISABLE_BUFFERING=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_NOEXT_VECTORS=y
+CONFIG_STM32_TIM8=y
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_USEC_PER_TICK=1000

boards/ark/mag/nuttx-config/include/board.h

@@ -0,0 +1,132 @@
+/************************************************************************************
+ * configs/px4fmu/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2009 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+#include <nuttx/config.h>
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include <stm32.h>
+
+/* HSI - 8 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - 8  MHz Crystal
+ * LSE - not installed
+ */
+#define STM32_BOARD_USEHSE      1
+#define STM32_BOARD_XTAL        8000000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+
+/* Main PLL Configuration */
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(384)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_4
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(8)
+#define STM32_PLLCFG_PLLR       RCC_PLLCFG_PLLR(2)
+
+#define STM32_RCC_PLLI2SCFGR_PLLI2SM RCC_PLLI2SCFGR_PLLI2SM(16)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SN RCC_PLLI2SCFGR_PLLI2SN(192)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SQ RCC_PLLI2SCFGR_PLLI2SQ(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SR RCC_PLLI2SCFGR_PLLI2SR(2)
+#define STM32_RCC_PLLI2SCFGR_PLLI2SSRC RCC_PLLI2SCFGR_PLLI2SSRC(0) /* HSE or HSI depending on PLLSRC of PLLCFGR*/
+
+#define STM32_RCC_DCKCFGR2_CK48MSEL RCC_DCKCFGR2_CK48MSEL_PLL
+#define STM32_RCC_DCKCFGR2_FMPI2C1SEL RCC_DCKCFGR2_FMPI2C1SEL_APB
+#define STM32_RCC_DCKCFGR2_SDIOSEL RCC_DCKCFGR2_SDIOSEL_48MHZ
+
+#define STM32_SYSCLK_FREQUENCY  96000000ul
+
+/* AHB clock (HCLK) is SYSCLK (96MHz) */
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK      /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY      /* Same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (48MHz) */
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd2     /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB1 will be twice PCLK1 (see page 112 of reference manual) */
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK (96MHz) */
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLK       /* PCLK2 = HCLK */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY)
+
+/* Timers driven from APB2 will be PCLK2 since no prescale division */
+#define STM32_APB2_TIM1_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx otherwise frequency is 2xAPBx. */
+#define BOARD_TIM2_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM3_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM4_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM5_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM6_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM7_FREQUENCY    (2 * STM32_PCLK1_FREQUENCY)
+#define BOARD_TIM8_FREQUENCY    (2 * STM32_PCLK2_FREQUENCY)
+
+/* Alternate function pin selections ************************************************/
+
+/* UARTs */
+#define GPIO_USART2_RX	GPIO_USART2_RX_1
+#define GPIO_USART2_TX	GPIO_USART2_TX_1
+
+/* CAN */
+#define GPIO_CAN1_RX	GPIO_CAN1_RX_1
+#define GPIO_CAN1_TX	GPIO_CAN1_TX_1
+
+/* SPI */
+#define GPIO_SPI2_MISO  GPIO_SPI2_MISO_1 /* PB14 */
+#define GPIO_SPI2_MOSI  GPIO_SPI2_MOSI_1 /* PB15 */
+#define GPIO_SPI2_SCK   GPIO_SPI2_SCK_1  /* PB10 */
+
+#endif /* __ARCH_BOARD_BOARD_H */

boards/ark/mag/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,42 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX   // DMA1, Stream 3, Channel 0
+#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX   // DMA1, Stream 4, Channel 0
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------

boards/ark/mag/nuttx-config/nsh/defconfig

@@ -0,0 +1,149 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/mag/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F412CE=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_VARS=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=262144
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=254
+CONFIG_SCHED_HPWORKSTACKSIZE=3000
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_WAITPID=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_FLASH_CONFIG_G=y
+CONFIG_STM32_FLASH_PREFETCH=y
+CONFIG_STM32_FLOWCONTROL_BROKEN=y
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_SPI2=y
+CONFIG_STM32_SPI2_DMA=y
+CONFIG_STM32_SPI2_DMA_BUFFER=2048
+CONFIG_STM32_TIM8=y
+CONFIG_STM32_USART2=y
+CONFIG_STM32_USART_BREAKS=y
+CONFIG_STM32_WWDG=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_SERIAL_CONSOLE=y
+CONFIG_USART2_TXBUFSIZE=1100
+CONFIG_USEC_PER_TICK=1000

boards/ark/mag/nuttx-config/scripts/canbootloader_script.ld

@@ -0,0 +1,134 @@
+/****************************************************************************
+ * nuttx-config/scripts/canbootloader_script.ld
+ *
+ *   Copyright (C) 2015 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08000000, LENGTH = 32K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/ark/mag/nuttx-config/scripts/script.ld

@@ -0,0 +1,146 @@
+/****************************************************************************
+ * scripts/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F412 has 1M of FLASH beginning at address 0x0800:0000 and
+ * 256Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of SRAM beginning at address 0x2002:0000
+ * 4)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The first 0x10000 of flash is reserved for the bootloader.
+ */
+
+MEMORY
+{
+    flash (rx)   : ORIGIN = 0x08010000, LENGTH = 928K
+    sram (rwx)   : ORIGIN = 0x20000000, LENGTH = 192K
+}
+
+OUTPUT_ARCH(arm)
+
+ENTRY(__start)		/* treat __start as the anchor for dead code stripping */
+EXTERN(_vectors)	/* force the vectors to be included in the output */
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(8);
+		/*
+		* This section positions the app_descriptor_t used
+		* by the make_can_boot_descriptor.py tool to set
+		* the application image's descriptor so that the
+		* uavcan bootloader has the ability to validate the
+		* image crc, size etc
+		*/
+		KEEP(*(.app_descriptor))
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+        .init_section : {
+                _sinit = ABSOLUTE(.);
+                KEEP(*(.init_array .init_array.*))
+                _einit = ABSOLUTE(.);
+        } > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/ark/mag/src/CMakeLists.txt

@@ -0,0 +1,65 @@
+############################################################################
+#
+#   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+if("${PX4_BOARD_LABEL}" STREQUAL  "canbootloader")
+
+	add_library(drivers_board
+		boot_config.h
+		boot.c
+		led.c
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch
+			nuttx_drivers
+			canbootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/canbootloader)
+
+else()
+	add_library(drivers_board
+		can.c
+		init.c
+		led.c
+		spi.cpp
+	)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_spi
+			drivers__led # drv_led_start
+			nuttx_arch
+			nuttx_drivers
+			px4_layer
+	)
+endif()

boards/ark/mag/src/board_config.h

@@ -0,0 +1,88 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * board internal definitions
+ */
+
+#pragma once
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+/* CAN  Silent mode control */
+#define GPIO_CAN1_SILENT_S0   /* PB11 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN11)
+
+/* CAN termination software control */
+#define GPIO_CAN1_TERMINATION /* PB13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN13)
+#define GPIO_CAN_TERM                    GPIO_CAN1_TERMINATION
+
+/* Boot config */
+#define GPIO_BOOT_CONFIG      /* PC15 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTC|GPIO_PIN15|GPIO_EXTI)
+
+/* LEDs are driven with open drain to support Anode to 5V or 3.3V */
+#define GPIO_TIM1_CH1         /* PA8  */ (GPIO_TIM1_CH1_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH2         /* PA9  */ (GPIO_TIM1_CH2_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+#define GPIO_TIM1_CH3         /* PA10 */ (GPIO_TIM1_CH3_1|GPIO_OPENDRAIN|GPIO_SPEED_2MHz)
+
+#define FLASH_BASED_PARAMS
+
+/* High-resolution timer */
+#define HRT_TIMER                    3  /* use timer 3 for the HRT */
+#define HRT_TIMER_CHANNEL            4  /* use capture/compare channel 4 */
+
+#define PX4_GPIO_INIT_LIST { \
+		GPIO_BOOT_CONFIG,                 \
+		GPIO_CAN1_TX,                     \
+		GPIO_CAN1_RX,                     \
+		GPIO_CAN1_SILENT_S0,              \
+		GPIO_CAN1_TERMINATION,            \
+	}
+
+__BEGIN_DECLS
+
+#define BOARD_HAS_N_S_RGB_LED       1
+#define BOARD_MAX_LEDS              BOARD_HAS_N_S_RGB_LED
+
+#ifndef __ASSEMBLY__
+
+extern void stm32_spiinitialize(void);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS

boards/ark/mag/src/boot.c

@@ -0,0 +1,188 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *       Author: Ben Dyer <ben_dyer@mac.com>
+ *               Pavel Kirienko <pavel.kirienko@zubax.com>
+ *               David Sidrane <david_s5@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <px4_config.h>
+#include <stdint.h>
+#include "boot_config.h"
+#include "board.h"
+
+#include <debug.h>
+#include <string.h>
+#include <arch/board/board.h>
+
+#include <nuttx/board.h>
+#include "led.h"
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1ENR) | RCC_APB1ENR_CAN1EN, STM32_RCC_APB1ENR);
+	stm32_configgpio(GPIO_CAN1_RX);
+	stm32_configgpio(GPIO_CAN1_TX);
+	stm32_configgpio(GPIO_CAN1_SILENT_S0);
+	stm32_configgpio(GPIO_CAN1_TERMINATION);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+	putreg32(getreg32(STM32_RCC_APB1RSTR) & ~RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+
+#if defined(OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO)
+	stm32_configgpio(GPIO_GETNODEINFO_JUMPER);
+#endif
+
+}
+
+/************************************************************************************
+ * Name: board_deinitialize
+ *
+ * Description:
+ *   This function is called by the bootloader code prior to booting
+ *   the application. Is should place the HW into an benign initialized state.
+ *
+ ************************************************************************************/
+
+void board_deinitialize(void)
+{
+	putreg32(getreg32(STM32_RCC_APB1RSTR) | RCC_APB1RSTR_CAN1RST, STM32_RCC_APB1RSTR);
+}
+
+/****************************************************************************
+ * Name: board_get_product_name
+ *
+ * Description:
+ *   Called to retrieve the product name. The returned value is a assumed
+ *   to be written to a pascal style string that will be length prefixed
+ *   and not null terminated
+ *
+ * Input Parameters:
+ *    product_name - A pointer to a buffer to write the name.
+ *    maxlen       - The maximum number of charter that can be written
+ *
+ * Returned Value:
+ *   The length of characters written to the buffer.
+ *
+ ****************************************************************************/
+
+uint8_t board_get_product_name(uint8_t *product_name, size_t maxlen)
+{
+	DEBUGASSERT(maxlen > UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	memcpy(product_name, HW_UAVCAN_NAME, UAVCAN_STRLEN(HW_UAVCAN_NAME));
+	return UAVCAN_STRLEN(HW_UAVCAN_NAME);
+}
+
+/****************************************************************************
+ * Name: board_get_hardware_version
+ *
+ * Description:
+ *   Called to retrieve the hardware version information. The function
+ *   will first initialize the the callers struct to all zeros.
+ *
+ * Input Parameters:
+ *    hw_version - A pointer to a uavcan_hardwareversion_t.
+ *
+ * Returned Value:
+ *   Length of the unique_id
+ *
+ ****************************************************************************/
+
+size_t board_get_hardware_version(uavcan_HardwareVersion_t *hw_version)
+{
+	memset(hw_version, 0, sizeof(uavcan_HardwareVersion_t));
+
+	hw_version->major = HW_VERSION_MAJOR;
+	hw_version->minor = HW_VERSION_MINOR;
+
+	return board_get_mfguid(*(mfguid_t *) hw_version->unique_id);
+}
+
+/****************************************************************************
+ * Name: board_indicate
+ *
+ * Description:
+ *   Provides User feedback to indicate the state of the bootloader
+ *   on board specific  hardware.
+ *
+ * Input Parameters:
+ *    indication - A member of the uiindication_t
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+#define led(n, code, r , g , b, h) {.red = (r),.green = (g), .blue = (b),.hz = (h)}
+
+typedef begin_packed_struct struct led_t {
+	uint8_t red;
+	uint8_t green;
+	uint8_t blue;
+	uint8_t hz;
+} end_packed_struct led_t;
+
+static const  led_t i2l[] = {
+
+	led(0, off,                             0,     0,     0,     0),
+	led(1, reset,                          128,   128,   128,   30),
+	led(2, autobaud_start,                  0,   128,     0,     1),
+	led(3, autobaud_end,                    0,   128,     0,     2),
+	led(4, allocation_start,                0,     0,    64,     2),
+	led(5, allocation_end,                  0,   128,    64,     3),
+	led(6, fw_update_start,                32,   128,    64,     3),
+	led(7, fw_update_erase_fail,           32,   128,    32,     3),
+	led(8, fw_update_invalid_response,     64,     0,     0,     1),
+	led(9, fw_update_timeout,              64,     0,     0,     2),
+	led(a, fw_update_invalid_crc,          64,     0,     0,     4),
+	led(b, jump_to_app,                     0,   128,     0,    10),
+
+};
+
+void board_indicate(uiindication_t indication)
+{
+	rgb_led(i2l[indication].red,
+		i2l[indication].green,
+		i2l[indication].blue,
+		i2l[indication].hz);
+}

boards/ark/mag/src/boot_config.h

@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/*
+ * @file boot_config.h
+ *
+ * bootloader definitions that configures the behavior and options
+ * of the Boot loader
+ * This file is relies on the parent folder's boot_config.h file and defines
+ * different usages of the hardware for bootloading
+ */
+
+#pragma once
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+/* Bring in the board_config.h definitions
+ * todo:make this be pulled in from a targed's build
+ * files in nuttx*/
+
+#include "board_config.h"
+#include "uavcan.h"
+#include <nuttx/compiler.h>
+
+#include <stdint.h>
+
+#include <stm32_flash.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+#define OPT_PREFERRED_NODE_ID ANY_NODE_ID
+
+//todo:wrap OPT_x in in ifdefs for command line definitions
+#define OPT_TBOOT_MS                    3000
+#define OPT_NODE_STATUS_RATE_MS         800
+#define OPT_NODE_INFO_RATE_MS           50
+#define OPT_BL_NUMBER_TIMERS            7
+
+/*
+ *  This Option set is set to 1 ensure a provider of firmware has an
+ *  opportunity update the node's firmware.
+ *  This Option is the default policy and can be overridden by
+ *  a jumper
+ *  When this Policy is set, the node will ignore tboot and
+ *  wait indefinitely for a GetNodeInfo request before booting.
+ *
+ *  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT is used to allow
+ *  the polarity of the jumper to be True Active
+ *
+ *  wait  OPT_WAIT_FOR_GETNODEINFO  OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO
+ *                                                 Jumper
+ *   yes           1                       0         x
+ *   yes           1                       1       Active
+ *   no            1                       1       Not Active
+ *   no            0                       0         X
+ *   yes           0                       1       Active
+ *   no            0                       1       Not Active
+ *
+ */
+#define OPT_WAIT_FOR_GETNODEINFO                    0
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO        1
+#define OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 1
+
+#define OPT_ENABLE_WD           1
+
+#define OPT_RESTART_TIMEOUT_MS          20000
+
+/* Reserved for the Booloader */
+#define OPT_BOOTLOADER_SIZE_IN_K        (1024*64)
+
+/* Reserved for the application out of the total
+ * system flash minus the BOOTLOADER_SIZE_IN_K
+ */
+#define OPT_APPLICATION_RESERVER_IN_K    0
+
+#define OPT_APPLICATION_IMAGE_OFFSET    OPT_BOOTLOADER_SIZE_IN_K
+#define OPT_APPLICATION_IMAGE_LENGTH    (FLASH_SIZE-(OPT_BOOTLOADER_SIZE_IN_K+OPT_APPLICATION_RESERVER_IN_K))
+
+
+#define FLASH_BASE              STM32_FLASH_BASE
+#define FLASH_SIZE              STM32_FLASH_SIZE
+
+#define APPLICATION_LOAD_ADDRESS (FLASH_BASE + OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_SIZE (FLASH_SIZE-OPT_APPLICATION_IMAGE_OFFSET)
+#define APPLICATION_LAST_8BIT_ADDRRESS  ((uint8_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint8_t)))
+#define APPLICATION_LAST_32BIT_ADDRRESS ((uint32_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint32_t)))
+#define APPLICATION_LAST_64BIT_ADDRRESS ((uint64_t *)((APPLICATION_LOAD_ADDRESS+APPLICATION_SIZE)-sizeof(uint64_t)))
+
+/* If this board uses big flash that have large sectors */
+
+#define OPT_USE_YIELD
+
+/* Bootloader Option*****************************************************************
+ *
+ */
+#define GPIO_GETNODEINFO_JUMPER (GPIO_BOOT_CONFIG & ~GPIO_EXTI)

boards/ark/mag/src/can.c

@@ -0,0 +1,130 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_internal.h"
+
+#include "stm32.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+#ifdef CONFIG_CAN
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+
+#endif

boards/ark/mag/src/init.c

@@ -0,0 +1,147 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * board specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialization.
+ */
+
+#include <px4_platform_common/px4_config.h>
+#include <px4_platform_common/tasks.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+#include <syslog.h>
+
+#include <nuttx/board.h>
+
+#include <stm32.h>
+#include "board_config.h"
+#include "led.h"
+#include <stm32_uart.h>
+
+#include <arch/board/board.h>
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <drivers/drv_watchdog.h>
+
+#include <systemlib/px4_macros.h>
+
+#include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	watchdog_init();
+
+	/* configure pins */
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	// Configure SPI all interfaces GPIO & enable power.
+	stm32_spiinitialize();
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	px4_platform_init();
+
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{2, 16 * 1024, 0x08008000},
+		{3, 16 * 1024, 0x0800C000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+	}
+
+#endif // FLASH_BASED_PARAMS
+
+	/* Configure the HW based on the manifest */
+	//px4_platform_configure();
+
+	return OK;
+}

boards/ark/mag/src/led.c

@@ -0,0 +1,124 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+#include "led.h"
+
+#define TMR_BASE        STM32_TIM1_BASE
+#define TMR_FREQUENCY   STM32_APB2_TIM1_CLKIN
+#define TMR_REG(o)      (TMR_BASE+(o))
+
+void rgb_led(int r, int g, int b, int freqs)
+{
+
+	long fosc = TMR_FREQUENCY;
+	long prescale = 2048;
+	long p1s = fosc / prescale;
+	long p0p5s  = p1s / 2;
+	uint16_t val;
+	static bool once = 0;
+
+	if (!once) {
+		once = 1;
+
+		/* Enable Clock to Block */
+		modifyreg32(STM32_RCC_APB2ENR, 0, RCC_APB2ENR_TIM1EN);
+
+		/* Reload */
+
+		val = getreg16(TMR_REG(STM32_BTIM_EGR_OFFSET));
+		val |= ATIM_EGR_UG;
+		putreg16(val, TMR_REG(STM32_BTIM_EGR_OFFSET));
+
+		/* Set Prescaler STM32_TIM_SETCLOCK */
+
+		putreg16(prescale, TMR_REG(STM32_BTIM_PSC_OFFSET));
+
+		/* Enable STM32_TIM_SETMODE*/
+
+		putreg16(ATIM_CR1_CEN | ATIM_CR1_ARPE, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC1M_SHIFT) | ATIM_CCMR1_OC1PE |
+			 (ATIM_CCMR_MODE_PWM1 << ATIM_CCMR1_OC2M_SHIFT) | ATIM_CCMR1_OC2PE, TMR_REG(STM32_GTIM_CCMR1_OFFSET));
+		putreg16((ATIM_CCMR_MODE_PWM1 << ATIM_CCMR2_OC3M_SHIFT) | ATIM_CCMR2_OC3PE, TMR_REG(STM32_GTIM_CCMR2_OFFSET));
+		putreg16(ATIM_CCER_CC3E | ATIM_CCER_CC3P |
+			 ATIM_CCER_CC2E | ATIM_CCER_CC2P |
+			 ATIM_CCER_CC1E | ATIM_CCER_CC1P, TMR_REG(STM32_GTIM_CCER_OFFSET));
+
+
+		stm32_configgpio(GPIO_TIM1_CH1);
+		stm32_configgpio(GPIO_TIM1_CH2);
+		stm32_configgpio(GPIO_TIM1_CH3);
+
+		/* master output enable = on */
+		putreg16(ATIM_BDTR_MOE, (TMR_REG(STM32_ATIM_BDTR_OFFSET)));
+	}
+
+	long p  = freqs == 0 ? p1s : p1s / freqs;
+	putreg32(p, TMR_REG(STM32_BTIM_ARR_OFFSET));
+
+	p  = freqs == 0 ? p1s + 1 : p0p5s / freqs;
+
+	putreg32((r * p) / 255, TMR_REG(STM32_GTIM_CCR1_OFFSET));
+	putreg32((g * p) / 255, TMR_REG(STM32_GTIM_CCR2_OFFSET));
+	putreg32((b * p) / 255, TMR_REG(STM32_GTIM_CCR3_OFFSET));
+
+	val = getreg16(TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+	if (freqs == 0) {
+		val &= ~ATIM_CR1_CEN;
+
+	} else {
+		val |= ATIM_CR1_CEN;
+	}
+
+	putreg16(val, TMR_REG(STM32_BTIM_CR1_OFFSET));
+
+}

boards/ark/mag/src/led.h

@@ -1,6 +1,7 @@
 /****************************************************************************
  *
- *   Copyright (C) 2023 PX4 Development Team. All rights reserved.
+ *   Copyright (C) 2015 PX4 Development Team. All rights reserved.
+ *   Author: David Sidrane<david_s5@nscdg.com>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
@@ -32,11 +33,5 @@
  ****************************************************************************/
 
 __BEGIN_DECLS
-void spix_sync_channel_init(unsigned channel);
-int spix_sync_servo_set(unsigned channel, uint8_t  value);
-unsigned spix_sync_servo_get(unsigned channel);
-int spix_sync_servo_init(unsigned rate);
-void spix_sync_servo_deinit(void);
-void spix_sync_servo_arm(bool armed);
-unsigned spix_sync_timer_get_period(unsigned timer);
+void rgb_led(int r, int g, int b, int freqs);
 __END_DECLS

boards/ark/mag/src/spi.cpp

@@ -0,0 +1,44 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI2, {
+		initSPIDevice(DRV_MAG_DEVTYPE_RM3100, SPI::CS{GPIO::PortB, GPIO::Pin12}, SPI::DRDY{GPIO::PortB, GPIO::Pin4}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/ark/mag/uavcan_board_identity

@@ -0,0 +1,17 @@
+# UAVCAN boot loadable Module ID
+set(uavcanblid_sw_version_major ${PX4_VERSION_MAJOR})
+set(uavcanblid_sw_version_minor ${PX4_VERSION_MINOR})
+add_definitions(
+	-DAPP_VERSION_MAJOR=${uavcanblid_sw_version_major}
+	-DAPP_VERSION_MINOR=${uavcanblid_sw_version_minor}
+)
+
+set(uavcanblid_hw_version_major 0)
+set(uavcanblid_hw_version_minor 93)
+set(uavcanblid_name "\"org.ark.mag\"")
+
+add_definitions(
+	-DHW_UAVCAN_NAME=${uavcanblid_name}
+	-DHW_VERSION_MAJOR=${uavcanblid_hw_version_major}
+	-DHW_VERSION_MINOR=${uavcanblid_hw_version_minor}
+)

boards/auterion/fmu-v6s/nuttx-config/nsh/defconfig

@@ -226,8 +226,8 @@ CONFIG_STM32H7_PHY_POLLING=y
 CONFIG_STM32H7_PROGMEM=y
 CONFIG_STM32H7_RTC=y
 CONFIG_STM32H7_RTC_HSECLOCK=y
-CONFIG_STM32H7_RTC_MAGIC_REG=1
 CONFIG_STM32H7_RTC_MAGIC=0xA5A5A5A5
+CONFIG_STM32H7_RTC_MAGIC_REG=1
 CONFIG_STM32H7_RTC_MAGIC_TIME_SET=0xA6A6A6A6
 CONFIG_STM32H7_SAVE_CRASHDUMP=y
 CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y

boards/auterion/fmu-v6x/src/CMakeLists.txt

@@ -70,5 +70,6 @@ else()
 			nuttx_drivers # sdio
 			px4_layer
 			platform_gpio_mcp23009
+			platform_gpio_mcp23017
 	)
 endif()

boards/auterion/fmu-v6x/src/init.cpp

@@ -75,6 +75,7 @@
 #include <px4_platform/board_determine_hw_info.h>
 #include <px4_platform/board_dma_alloc.h>
 #include <px4_platform/gpio/mcp23009.hpp>
+#include <px4_platform/gpio/mcp23017.hpp>
 
 /****************************************************************************
  * Pre-Processor Definitions

boards/corvon/743v1/firmware.prototype

@@ -1,5 +1,5 @@
 {
-    "board_id": 1188,
+    "board_id": 1189,
     "magic": "PX4FWv1",
     "description": "Firmware for the CORVON743v1 board",
     "image": "",

boards/corvon/743v1/src/hw_config.h

@@ -96,7 +96,7 @@
 #define INTERFACE_USART                1
 #define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
 #define BOOT_DELAY_ADDRESS             0x000001a0
-#define BOARD_TYPE                     1188
+#define BOARD_TYPE                     1189
 #define BOARD_FLASH_SECTORS            (14)
 #define BOARD_FLASH_SIZE               (16 * 128 * 1024)
 #define APP_RESERVATION_SIZE 	       (1 * 128 * 1024)

boards/micoair/h743-aio/default.px4board

@@ -37,7 +37,6 @@ CONFIG_DRIVERS_POWER_MONITOR_VOXLPM=y
 CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_COMMON_RC=y
-CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_DRIVERS_ROBOCLAW=y
 CONFIG_COMMON_RPM=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y

boards/micoair/h743-lite/bootloader.px4board

@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""

boards/micoair/h743-lite/default.px4board

@@ -0,0 +1,107 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_SERIAL_URT6="/dev/ttyS6"
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
+CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS4"
+CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS7"
+CONFIG_BOARD_SERIAL_RC="/dev/ttyS5"
+CONFIG_BOARD_PARAM_FILE="/fs/microsd/params"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_GOERTEK_SPA06=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ASP5033=y
+CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_ETS=y
+CONFIG_DRIVERS_DIFFERENTIAL_PRESSURE_MS4515=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM45686=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_DRIVERS_POWER_MONITOR_INA220=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_POWER_MONITOR_INA228=y
+CONFIG_DRIVERS_POWER_MONITOR_INA238=y
+CONFIG_DRIVERS_POWER_MONITOR_PM_SELECTOR_AUTERION=y
+CONFIG_DRIVERS_POWER_MONITOR_VOXLPM=y
+CONFIG_DRIVERS_PPS_CAPTURE=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_COMMON_RC=y
+CONFIG_COMMON_RPM=y
+CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
+CONFIG_DRIVERS_TAP_ESC=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_COMMON_UWB=y
+CONFIG_COMMON_WIND_SENSOR=y
+CONFIG_MODULES_AIRSHIP_ATT_CONTROL=y
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL=y
+CONFIG_MODULES_FW_RATE_CONTROL=y
+CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_PAYLOAD_DELIVERER=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_UXRCE_DDS_CLIENT=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_FAILURE=y
+CONFIG_SYSTEMCMDS_GPIO=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
+CONFIG_SYSTEMCMDS_SERIAL_PASSTHRU=y
+CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TESTS=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/micoair/h743-lite/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 1202,
+    "magic": "PX4FWv1",
+    "description": "Firmware for the MicoAir743-Lite board",
+    "image": "",
+    "build_time": 0,
+    "summary": "MicoAir743-Lite",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1966080,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/micoair/h743-lite/init/rc.board_defaults

@@ -0,0 +1,28 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+param set-default BAT1_A_PER_V 40
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_V_CHARGED 4.2
+param set-default BAT1_V_DIV 21.12
+param set-default BAT1_V_EMPTY 3.2
+
+param set-default SYS_HAS_MAG 0
+#param set-default SENS_EN_SPA06 1
+param set-default PWM_MAIN_TIM0 -4
+param set-default RC_INPUT_PROTO -1
+
+param set-default MAV_2_CONFIG 104
+param set-default SER_TEL4_BAUD 115200
+
+param set-default IMU_GYRO_CUTOFF 80
+param set-default SYS_AUTOSTART 4001
+param set-default MC_PITCHRATE_K 0.4
+param set-default MC_ROLLRATE_K 0.35
+param set-default MC_YAWRATE_K 1.2
+param set-default MC_YAWRATE_MAX 360
+param set-default MAV_TYPE 2
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 4
+param set-default CBRK_SUPPLY_CHK 894281

boards/micoair/h743-lite/init/rc.board_extras

@@ -0,0 +1,7 @@
+#!/bin/sh
+#
+# board specific extras init
+#------------------------------------------------------------------------------
+
+# enable onboard OSD chip
+# atxxxx start -s

boards/micoair/h743-lite/init/rc.board_sensors

@@ -0,0 +1,13 @@
+#!/bin/sh
+#
+# board specific sensors init
+#------------------------------------------------------------------------------
+
+board_adc start
+
+# # Internal SPI bus ICM45686 accel/gyro
+icm45686 -s -b 3 -R 2 start
+
+# Internal baro
+#spa06 -I -a 0x77 start
+spa06 -X -a 0x77 -b 2 start

boards/micoair/h743-lite/nuttx-config/bootloader/defconfig

@@ -0,0 +1,85 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/micoair/h743-lite/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x004b
+CONFIG_CDCACM_PRODUCTSTR="MicoAir743-Lite"
+CONFIG_CDCACM_RXBUFSIZE=6000
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3162
+CONFIG_CDCACM_VENDORSTR="MicoAir"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEBUG_TCBINFO=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000

boards/micoair/h743-lite/nuttx-config/include/board.h

@@ -0,0 +1,414 @@
+/************************************************************************************
+ * nuttx-configs/px4_fmu-v6u/include/board.h
+ *
+ *   Copyright (C) 2016-2019 Gregory Nutt. All rights reserved.
+ *   Authors: David Sidrane <david.sidrane@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#ifndef __NUTTX_CONFIG_MICOAIR743_LITE_INCLUDE_BOARD_H
+#define __NUTTX_CONFIG_MICOAIR743_LITE_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The MicoAir743-Lite  board provides the following clock sources:
+ *
+ *   X1: 8 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 64 MHz RC factory-trimmed
+ *   HSE:  8 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 8,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+#define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (8,000,000 / 1) * 120 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(120)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 120)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(2)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(2)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 2) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* FDCAN 1 clock source */
+
+#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 480kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 20 MHz Max for now - more reliable on some boards than 25 MHz
+ * 20 MHz = PLL1Q/(2*div), div =  PLL1Q/(2*freq), div = 6 = 240 / 40
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (6 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The board has two, LED_GREEN a Green LED and LED_BLUE a Blue LED,
+ * that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_LED3        2
+#define BOARD_NLEDS       3
+
+#define BOARD_LED_RED     BOARD_LED1
+#define BOARD_LED_GREEN   BOARD_LED2
+#define BOARD_LED_BLUE    BOARD_LED3
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_2   /* PA10 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_2   /* PA9  */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_1   /* PA3  */
+#define GPIO_USART2_TX   GPIO_USART2_TX_1   /* PA2  */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9  */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8  */
+
+#define GPIO_UART4_RX    GPIO_UART4_RX_2    /* PA1  */
+#define GPIO_UART4_TX    GPIO_UART4_TX_2    /* PA0  */
+
+#define GPIO_UART5_RX    GPIO_UART5_RX_2    /* PB5  */
+#define GPIO_UART5_TX    GPIO_UART5_TX_2    /* PB6  */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7  */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_3    /* PE7  */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
+
+#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0  */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1  */
+
+
+/* SPI
+ *
+
+ */
+
+#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
+
+#define GPIO_SPI3_MISO   GPIO_SPI3_MISO_1               /* PB4  */
+#define GPIO_SPI3_MOSI   GPIO_SPI3_MOSI_1               /* PD6 */
+#define GPIO_SPI3_SCK    ADJ_SLEW_RATE(GPIO_SPI3_SCK_1) /* PB3  */
+
+/* I2C
+ *
+
+ *
+ */
+
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2       /* PB9  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
+
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_1       /* PB10 */
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_1       /* PB11 */
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN10)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN11)
+
+# define PROBE_INIT(mask)
+# define PROBE(n,s)
+# define PROBE_MARK(n)
+
+#endif  /*__NUTTX_CONFIG_MICOAIR743_LITE_INCLUDE_BOARD_H  */

boards/micoair/h743-lite/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,36 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_0
+#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_0

boards/micoair/h743-lite/nuttx-config/nsh/defconfig

@@ -0,0 +1,244 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/micoair/h743-lite/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H743VI=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=768
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0036
+CONFIG_CDCACM_PRODUCTSTR="MicoAir743-Lite"
+CONFIG_CDCACM_RXBUFSIZE=6000
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x1B8C
+CONFIG_CDCACM_VENDORSTR="MicoAir"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=3194
+CONFIG_IOB_NBUFFERS=24
+CONFIG_IOB_NCHAINS=24
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_IOB=y
+CONFIG_MM_REGIONS=4
+CONFIG_NAME_MAX=40
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDMMC1_SDIO_PULLUP=y
+CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_FLASH_OVERRIDE_I=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_HSECLOCK=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC1=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI3=y
+CONFIG_STM32H7_SPI3_DMA=y
+CONFIG_STM32H7_SPI3_DMA_BUFFER=2048
+CONFIG_STM32H7_SPI_DMATHRESHOLD=8
+CONFIG_STM32H7_TIM12=y
+CONFIG_STM32H7_TIM15=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM3=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM8=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART5=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=800
+CONFIG_UART5_RXBUFSIZE=600
+CONFIG_UART5_TXBUFSIZE=800
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_TXBUFSIZE=800
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=800
+CONFIG_USART1_RXBUFSIZE=1200
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_TXBUFSIZE=800
+CONFIG_USART3_RXBUFSIZE=600
+CONFIG_USART3_TXBUFSIZE=800
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=800
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_WATCHDOG=y

boards/micoair/h743-lite/nuttx-config/scripts/bootloader_script.ld

@@ -0,0 +1,213 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2019 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The Durandal-v1 uses an STM32H743II has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The Durandal has a Switch on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the swiutch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743ZI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH = 2048K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/micoair/h743-lite/nuttx-config/scripts/script.ld

@@ -0,0 +1,228 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2020 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The board uses an STM32H743II and has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * There's a switch on board, the BOOT0 pin is at ground so by default,
+ * the STM32 will boot to address 0x0800:0000 in FLASH unless the switch is
+ * drepresed, then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743ZI also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
+
+	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
+	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
+	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
+	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > FLASH
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > FLASH
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > FLASH
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > FLASH
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > AXI_SRAM
+
+	/* Emit the the D3 power domain section for locating BDMA data */
+
+	.sram4_reserve (NOLOAD) :
+	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
+	} > SRAM4
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/micoair/h743-lite/src/CMakeLists.txt

@@ -0,0 +1,68 @@
+############################################################################
+#
+#   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
+	add_library(drivers_board
+		bootloader_main.c
+		usb.c
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch
+			nuttx_drivers
+			bootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+
+else()
+	add_library(drivers_board
+		i2c.cpp
+		init.c
+		led.c
+		sdio.c
+		spi.cpp
+		timer_config.cpp
+		usb.c
+	)
+	add_dependencies(drivers_board arch_board_hw_info)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_io_pins
+			arch_spi
+			arch_board_hw_info
+			drivers__led
+			nuttx_arch
+			nuttx_drivers
+			px4_layer
+	)
+endif()

boards/micoair/h743-lite/src/board_config.h

@@ -0,0 +1,199 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * Board internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+#include <stm32_gpio.h>
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+
+
+
+/* LEDs are driven with push open drain to support Anode to 5V or 3.3V */
+
+#  define GPIO_nLED_RED         /* PE3   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
+#  define GPIO_nLED_GREEN       /* PE2   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
+#  define GPIO_nLED_BLUE        /* PE4   */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
+
+#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
+#  define BOARD_OVERLOAD_LED     LED_RED
+#  define BOARD_ARMED_STATE_LED  LED_BLUE
+
+
+/*
+ * ADC channels
+ *
+ * These are the channel numbers of the ADCs of the microcontroller that
+ * can be used by the Px4 Firmware in the adc driver
+ */
+
+/* ADC defines to be used in sensors.cpp to read from a particular channel */
+#define SYSTEM_ADC_BASE STM32_ADC1_BASE
+#define ADC1_CH(n)                  (n)
+
+/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
+#define PX4_ADC_GPIO  \
+	/* PC0  */  GPIO_ADC123_INP10, \
+	/* PC1  */  GPIO_ADC123_INP11
+
+
+/* Define Channel numbers must match above GPIO pin IN(n)*/
+#define ADC_BATTERY_VOLTAGE_CHANNEL     /* PC0  */  ADC1_CH(10)
+#define ADC_BATTERY_CURRENT_CHANNEL     /* PC1  */  ADC1_CH(11)
+
+
+#define ADC_CHANNELS \
+	((1 << ADC_BATTERY_VOLTAGE_CHANNEL) | \
+	 (1 << ADC_BATTERY_CURRENT_CHANNEL))
+
+
+/* Define Battery 1 Voltage Divider and A per V
+ */
+
+// #define BOARD_BATTERY1_V_DIV         (11.0f)     /* measured with the provided PM board */
+// #define BOARD_BATTERY1_A_PER_V       (40.0f)
+// #define BOARD_BATTERY2_V_DIV         (11.0f)     /* measured with the provided PM board */
+
+
+/* PWM
+ */
+#define DIRECT_PWM_OUTPUT_CHANNELS   14
+#define DIRECT_INPUT_TIMER_CHANNELS  14
+
+#define BOARD_HAS_PWM  DIRECT_PWM_OUTPUT_CHANNELS
+
+#define GPIO_TONE_ALARM_IDLE    /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
+#define GPIO_TONE_ALARM_GPIO    /* PD15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN15)
+
+/* USB OTG FS
+ *
+ * PA8  OTG_FS_VBUS VBUS sensing
+ */
+
+#define GPIO_OTGFS_VBUS         /* PA8 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN8)
+
+
+/* High-resolution timer */
+#define HRT_TIMER               8  /* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
+
+
+/* RC Serial port */
+#define RC_SERIAL_PORT          "/dev/ttyS5"
+#define BOARD_SUPPORTS_RC_SERIAL_PORT_OUTPUT
+
+//#define GPIO_I2C2_DRDY1_SPA06      /* PD0  */  (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTD|GPIO_PIN0)
+
+
+/* SD Card */
+#define SDIO_SLOTNO             0  /* Only one slot */
+#define SDIO_MINOR              0
+
+/* This board provides a DMA pool and APIs */
+#define BOARD_DMA_ALLOC_POOL_SIZE 5120
+
+/* This board provides the board_on_reset interface */
+#define BOARD_HAS_ON_RESET 1
+
+#define PX4_GPIO_INIT_LIST { \
+		PX4_ADC_GPIO, \
+		GPIO_TONE_ALARM_IDLE,             \
+	}
+
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
+
+#define BOARD_NUM_IO_TIMERS 6
+
+
+__BEGIN_DECLS
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void);
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+extern void board_peripheral_reset(int ms);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS

boards/micoair/h743-lite/src/bootloader_main.c

@@ -0,0 +1,75 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file bootloader_main.c
+ *
+ * FMU-specific early startup code for bootloader
+*/
+
+#include "board_config.h"
+#include "bl.h"
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+#include <px4_platform_common/init.h>
+
+extern int sercon_main(int c, char **argv);
+
+__EXPORT void board_on_reset(int status) {}
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	/* configure USB interfaces */
+	stm32_usbinitialize();
+}
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	return 0;
+}
+
+void board_late_initialize(void)
+{
+	sercon_main(0, NULL);
+}
+
+extern void sys_tick_handler(void);
+void board_timerhook(void)
+{
+	sys_tick_handler();
+}

boards/micoair/h743-lite/src/hw_config.h

@@ -0,0 +1,135 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+/****************************************************************************
+ * 10-8--2016:
+ *  To simplify the ripple effect on the tools, we will be using
+ *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
+ *  moving forward all Bootloaders must contain the prefix "PX4 BL "
+ *  in the USBDEVICESTRING
+ *  This Change will be made in an upcoming BL release
+ ****************************************************************************/
+/*
+ * Define usage to configure a bootloader
+ *
+ *
+ * Constant                example          Usage
+ * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
+ * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
+ * BOARD_FMUV2
+ * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
+ * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
+ * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
+ * USBPRODUCTID         0x0011                - PID Should match defconfig
+ * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
+ *                                               delay provided by an APP FW
+ * BOARD_TYPE           9                     - Must match .prototype boad_id
+ * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
+ * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
+ * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
+ * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
+ *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
+ *                                              programmatically
+ *
+ * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
+ *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
+ *                                               during a FW upgrade.
+ *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
+ *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
+ *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
+ *                                               in the table.
+ *
+ * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
+ *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
+ *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
+ *                                                                        and hence the address space of FLASH to erase and program.
+ * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
+ * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
+ *
+ * * Other defines are somewhat self explanatory.
+ */
+
+/* Boot device selection list*/
+#define USB0_DEV       0x01
+#define SERIAL0_DEV    0x02
+#define SERIAL1_DEV    0x04
+
+#define APP_LOAD_ADDRESS               0x08020000
+#define BOOTLOADER_DELAY               5000
+#define INTERFACE_USB                  1
+#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
+#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
+
+//#define USE_VBUS_PULL_DOWN
+#define INTERFACE_USART                1
+#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
+#define BOOT_DELAY_ADDRESS             0x000001a0
+#define BOARD_TYPE                     1202
+#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
+#define BOARD_FLASH_SECTORS            (15)
+#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
+
+#define OSC_FREQ                       8
+
+#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
+#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
+#define BOARD_LED_ON                   0
+#define BOARD_LED_OFF                  1
+
+#define SERIAL_BREAK_DETECT_DISABLED   1
+
+#if !defined(ARCH_SN_MAX_LENGTH)
+# define ARCH_SN_MAX_LENGTH 12
+#endif
+
+#if !defined(APP_RESERVATION_SIZE)
+#  define APP_RESERVATION_SIZE 0
+#endif
+
+#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
+#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
+#endif
+
+#if !defined(USB_DATA_ALIGN)
+# define USB_DATA_ALIGN
+#endif
+
+#ifndef BOOT_DEVICES_SELECTION
+#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#ifndef BOOT_DEVICES_FILTER_ONUSB
+#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif

boards/micoair/h743-lite/src/i2c.cpp

@@ -0,0 +1,39 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusExternal(1),
+	initI2CBusExternal(2),
+};

boards/micoair/h743-lite/src/init.c

@@ -0,0 +1,208 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * FMU-specific early startup code. This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialisation.
+ */
+
+#include "board_config.h"
+
+#include <syslog.h>
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <systemlib/px4_macros.h>
+#include <px4_arch/io_timer.h>
+#include <px4_platform_common/init.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_dma_alloc.h>
+
+# if defined(FLASH_BASED_PARAMS)
+#  include <parameters/flashparams/flashfs.h>
+#endif
+
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
+/************************************************************************************
+ * Name: board_peripheral_reset
+ *
+ * Description:
+ *
+ ************************************************************************************/
+__EXPORT void board_peripheral_reset(int ms)
+{
+	UNUSED(ms);
+}
+
+/************************************************************************************
+ * Name: board_on_reset
+ *
+ * Description:
+ * Optionally provided function called on entry to board_system_reset
+ * It should perform any house keeping prior to the rest.
+ *
+ * status - 1 if resetting to boot loader
+ *          0 if just resetting
+ *
+ ************************************************************************************/
+__EXPORT void board_on_reset(int status)
+{
+	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+	}
+
+	/*
+	 * On resets invoked from system (not boot) ensure we establish a low
+	 * output state on PWM pins to disarm the ESC and prevent the reset from potentially
+	 * spinning up the motors.
+	 */
+	if (status >= 0) {
+		up_mdelay(100);
+	}
+}
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+__EXPORT void stm32_boardinitialize(void)
+{
+	/* Reset PWM first thing */
+	board_on_reset(-1);
+
+	/* configure LEDs */
+	board_autoled_initialize();
+
+	/* configure pins */
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	/* configure SPI interfaces */
+	stm32_spiinitialize();
+
+	/* configure USB interfaces */
+	stm32_usbinitialize();
+
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX;
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	/* Need hrt running before using the ADC */
+	px4_platform_init();
+
+	/* configure the DMA allocator */
+	if (board_dma_alloc_init() < 0) {
+		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
+	}
+
+	/* initial LED state */
+	drv_led_start();
+	led_off(LED_RED);
+	led_off(LED_BLUE);
+
+	if (board_hardfault_init(2, true) != 0) {
+		led_on(LED_BLUE);
+	}
+
+#ifdef CONFIG_MMCSD
+	int ret = stm32_sdio_initialize();
+
+	if (ret != OK) {
+		led_on(LED_BLUE);
+		return ret;
+	}
+
+#endif
+
+// TODO：internal flash store parameters
+#if defined(FLASH_BASED_PARAMS)
+	static sector_descriptor_t params_sector_map[] = {
+		{15, 128 * 1024, 0x081E0000},
+		{0, 0, 0},
+	};
+
+	/* Initialize the flashfs layer to use heap allocated memory */
+	int result = parameter_flashfs_init(params_sector_map, NULL, 0);
+
+	if (result != OK) {
+		syslog(LOG_ERR, "[boot] FAILED to init params in FLASH %d\n", result);
+		led_on(LED_RED);
+	}
+
+#endif
+
+	/* Configure the HW based on the manifest */
+	px4_platform_configure();
+
+	return OK;
+}

boards/micoair/h743-lite/src/led.c

@@ -0,0 +1,114 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+#  define xlat(p) (p)
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
+	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
+	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
+};
+
+__EXPORT void led_init(void)
+{
+	/* Configure LED GPIOs for output */
+	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
+		if (g_ledmap[l] != 0) {
+			stm32_configgpio(g_ledmap[l]);
+		}
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	/* Drive Low to switch on */
+	if (g_ledmap[led] != 0) {
+		stm32_gpiowrite(g_ledmap[led], !state);
+	}
+}
+
+static bool phy_get_led(int led)
+{
+	/* If Low it is on */
+	if (g_ledmap[led] != 0) {
+		return !stm32_gpioread(g_ledmap[led]);
+	}
+
+	return false;
+}
+
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(xlat(led), true);
+}
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(xlat(led), false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
+}

boards/micoair/h743-lite/src/sdio.c

@@ -0,0 +1,177 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <board_config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+
+#include "chip.h"
+#include "board_config.h"
+#include "stm32_gpio.h"
+#include "stm32_sdmmc.h"
+
+#ifdef CONFIG_MMCSD
+
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Card detections requires card support and a card detection GPIO */
+
+#define HAVE_NCD   1
+#if !defined(GPIO_SDMMC1_NCD)
+#  undef HAVE_NCD
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static FAR struct sdio_dev_s *sdio_dev;
+#ifdef HAVE_NCD
+static bool g_sd_inserted = 0xff; /* Impossible value */
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_ncd_interrupt
+ *
+ * Description:
+ *   Card detect interrupt handler.
+ *
+ ****************************************************************************/
+
+#ifdef HAVE_NCD
+static int stm32_ncd_interrupt(int irq, FAR void *context)
+{
+	bool present;
+
+	present = !stm32_gpioread(GPIO_SDMMC1_NCD);
+
+	if (sdio_dev && present != g_sd_inserted) {
+		sdio_mediachange(sdio_dev, present);
+		g_sd_inserted = present;
+	}
+
+	return OK;
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void)
+{
+	int ret;
+
+#ifdef HAVE_NCD
+	/* Card detect */
+
+	bool cd_status;
+
+	/* Configure the card detect GPIO */
+
+	stm32_configgpio(GPIO_SDMMC1_NCD);
+
+	/* Register an interrupt handler for the card detect pin */
+
+	stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
+#endif
+
+	/* Mount the SDIO-based MMC/SD block driver */
+	/* First, get an instance of the SDIO interface */
+
+	finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
+
+	sdio_dev = sdio_initialize(SDIO_SLOTNO);
+
+	if (!sdio_dev) {
+		syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
+		return -ENODEV;
+	}
+
+	/* Now bind the SDIO interface to the MMC/SD driver */
+
+	finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
+
+	ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
+
+	if (ret != OK) {
+		syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+		return ret;
+	}
+
+	finfo("Successfully bound SDIO to the MMC/SD driver\n");
+
+#ifdef HAVE_NCD
+	/* Use SD card detect pin to check if a card is g_sd_inserted */
+
+	cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
+	finfo("Card detect : %d\n", cd_status);
+
+	sdio_mediachange(sdio_dev, cd_status);
+#else
+	/* Assume that the SD card is inserted.  What choice do we have? */
+
+	sdio_mediachange(sdio_dev, true);
+#endif
+
+	return OK;
+}
+
+#endif /* CONFIG_MMCSD */

boards/micoair/h743-lite/src/spi.cpp

@@ -0,0 +1,45 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+
+constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
+	initSPIBus(SPI::Bus::SPI3, {
+		initSPIDevice(DRV_IMU_DEVTYPE_ICM45686, SPI::CS{GPIO::PortD, GPIO::Pin4}, SPI::DRDY{GPIO::PortD, GPIO::Pin5}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses);

boards/micoair/h743-lite/src/timer_config.cpp

@@ -0,0 +1,63 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/io_timer_hw_description.h>
+
+constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
+	initIOTimer(Timer::Timer1, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer3, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer12),
+	initIOTimer(Timer::Timer15),
+};
+
+constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel4}, {GPIO::PortE, GPIO::Pin14}),
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel3}, {GPIO::PortE, GPIO::Pin13}),
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
+	initIOTimerChannel(io_timers, {Timer::Timer1, Timer::Channel1}, {GPIO::PortE, GPIO::Pin9}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel4}, {GPIO::PortB, GPIO::Pin1}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel3}, {GPIO::PortB, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel2}, {GPIO::PortA, GPIO::Pin7}),
+	initIOTimerChannel(io_timers, {Timer::Timer3, Timer::Channel1}, {GPIO::PortA, GPIO::Pin6}),
+	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel1}, {GPIO::PortE, GPIO::Pin5}),
+	initIOTimerChannel(io_timers, {Timer::Timer15, Timer::Channel2}, {GPIO::PortE, GPIO::Pin6}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel1}, {GPIO::PortD, GPIO::Pin12}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
+	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel1}, {GPIO::PortB, GPIO::Pin14}),
+	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel2}, {GPIO::PortB, GPIO::Pin15}),
+
+};
+
+constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
+	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/micoair/h743-lite/src/usb.c

@@ -0,0 +1,78 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2021 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+#include "board_config.h"
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+#include <stm32_otg.h>
+#include <debug.h>
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32H7_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	uinfo("resume: %d\n", resume);
+}

boards/micoair/h743-v2/default.px4board

@@ -36,7 +36,6 @@ CONFIG_DRIVERS_POWER_MONITOR_VOXLPM=y
 CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_COMMON_RC=y
-CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_COMMON_RPM=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_DRIVERS_TAP_ESC=y

boards/micoair/h743/default.px4board

@@ -38,7 +38,6 @@ CONFIG_DRIVERS_POWER_MONITOR_VOXLPM=y
 CONFIG_DRIVERS_PPS_CAPTURE=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_COMMON_RC=y
-CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_COMMON_RPM=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_DRIVERS_TAP_ESC=y

boards/nxp/mr-canhubk3/nuttx-config/nsh/defconfig

@@ -206,7 +206,6 @@ CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_MMCSDSPIPORTNO=1
 CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_READLINE=y
 CONFIG_NSH_QUOTE=y
 CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
@@ -279,7 +278,6 @@ CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1768
-CONFIG_SCHED_WAITPID=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y

boards/nxp/mr-tropic/bootloader.px4board

@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""

boards/nxp/mr-tropic/cmake/upload.cmake

@@ -0,0 +1,44 @@
+############################################################################
+#
+#   Copyright (c) 2024 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+
+set(PX4_FW_NAME ${PX4_BINARY_DIR}/${PX4_BOARD_VENDOR}_${PX4_BOARD_MODEL}_${PX4_BOARD_LABEL}.hex)
+
+add_custom_target(upload_teensy
+	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/teensy_uploader.py --port ${serial_ports} ${PX4_FW_NAME} --vendor-id 0x1FC9 --product-id 0x0024
+	DEPENDS ${PX4_FW_NAME}
+	COMMENT "uploading px4"
+	VERBATIM
+	USES_TERMINAL
+	WORKING_DIRECTORY ${PX4_BINARY_DIR}
+)

boards/nxp/mr-tropic/default.px4board

@@ -0,0 +1,109 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ETHERNET=y
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
+CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS3"
+CONFIG_BOARD_SERIAL_RC="/dev/ttyS6"
+CONFIG_BOARD_PARAM_FILE="/fs/nor/mtd_params"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_BAROMETER_INVENSENSE_ICP201XX=y
+CONFIG_DRIVERS_BAROMETER_MS5611=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DISTANCE_SENSOR_LIGHTWARE_SF45_SERIAL=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM45686=y
+CONFIG_COMMON_INS=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_DRIVERS_LIGHTS_RGBLED_PWM=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM350=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_DRIVERS_OSD_MSP_OSD=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_POWER_MONITOR_INA228=y
+CONFIG_DRIVERS_POWER_MONITOR_INA238=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_COMMON_RC=y
+CONFIG_DRIVERS_SAFETY_BUTTON=y
+CONFIG_COMMON_TELEMETRY=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_INTERFACES=1
+CONFIG_COMMON_UWB=y
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_MODE_MANAGER=y
+CONFIG_MODULES_FW_LATERAL_LONGITUDINAL_CONTROL=y
+CONFIG_MODULES_FW_RATE_CONTROL=y
+CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODE_NAVIGATOR_VTOL_TAKEOFF=y
+CONFIG_NUM_MISSION_ITMES_SUPPORTED=1000
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_UXRCE_DDS_CLIENT=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_MODULES_ZENOH=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_DUMPFILE=y
+CONFIG_SYSTEMCMDS_I2C_LAUNCHER=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_NETMAN=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
+CONFIG_SYSTEMCMDS_SERIAL_TEST=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_USB_CONNECTED=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y