Julian Oes
98fde4cbac
gimbal: correctly set gimbal_device_id
...
When we use a gimbal connected via "RC", so PWM via the Aux channels, we
need to set the gimbal_device_id to 1 as per the protocol.
This was missing for GIMBAL_DEVICE_ATTITUDE_STATUS, so I added that, and
fixed the name of that variable while at it.
2024-12-18 07:51:40 +01:00
GuillaumeLaine
2e166379c7
docs: split msgs as un/versioned
2024-12-13 16:34:37 +01:00
GuillaumeLaine
4d62522942
uxrce_dds_client: remove unused msgdir arg from script
2024-12-13 16:34:37 +01:00
GuillaumeLaine
4fe7d713d3
msg: introduce message versioning
2024-12-13 16:34:37 +01:00
chfriedrich98
5dcccd999c
mecanum: add slew rates to yaw, yaw rate and speed setpoints
2024-12-02 10:54:43 +01:00
chfriedrich98
6cce443005
mecanum: deprecate RM_MISS_SPD_DEF
2024-12-02 10:54:43 +01:00
bresch
b19a6ee3b5
ekf2: store position state as lat/lon/alt
...
The position error state is still defined in a body-fixed NED frame but the
position state itself is latitude-longitude-altitude.
2024-11-22 15:13:47 +01:00
Matthias Grob
b5d18c6131
Remove unused collision_report message
2024-11-12 21:18:57 -05:00
chfriedrich98
4f00df60ae
differential: add slew rates for setpoints, deprecate RD_MAN_YAW_SCALE and update airframe tuning
2024-11-11 14:44:10 +01:00
chfriedrich98
e8f8bc9af7
ackermann: add lateral acceleration setpoint, acro/position mode and updates to auto modes
2024-10-31 16:15:37 +01:00
chfriedrich98
6a7edac10d
ackermann: restructure module
2024-10-31 16:15:37 +01:00
Alex Klimaj
4d1c65d722
boards: new ARK FPV FC ( #23830 )
...
* add new payload power switch (RC_MAP_PAY_SW)
2024-10-30 11:35:35 -04:00
Marco Hauswirth
0c451552c7
EKF2: add validity flags to global pos message ( #23787 )
...
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
2024-10-23 10:19:04 +02:00
Mathieu Bresciani
28d960fc21
fix VehicleCommand.msg syntax
2024-09-30 13:42:50 -04:00
Daniel Agar
332b7bec27
commander: ignore REQUEST_CAMERA_INFORMATION
...
- add answer command logging
2024-09-27 10:33:37 -07:00
Silvan Fuhrer
172948c5eb
FailsafeFlags: add comment where battery_warning is defined
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-09-27 14:25:27 +02:00
chfriedrich98
0e65679c9e
Mecanum rover: add dedicated module for mecanum rovers ( #23708 )
2024-09-25 09:35:41 +02:00
Alvaro Fernandez
2ecffff700
fw_tecs: Support tighter altitude tracking during low-height flight ( #23519 )
...
* fw_tecs: Support tighter altitude tracking during low-height flight. Added FW_T_THR_LOW_HGT defining low-height flight threshold
* tecs: Applied smoothed-out altitude TC transition to landings
* fw_tecs: modified tighter altitude control for low-height implementation
* addressed PR comments
* addressed PR comments
---------
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2024-09-19 16:24:53 +03:00
Matthias Grob
555b2e6abc
BatteryStatus: Clarify "incompatible voltage" error message
2024-09-18 17:18:02 +02:00
Konrad
82a7d0410c
DistanceSensorModeChangeRequest: renaming of variable
2024-09-16 09:11:23 +02:00
Konrad
e6f07bde2a
lightware_laser: add option to listen to system to enable/disable distance sensor
2024-09-16 09:11:23 +02:00
Konrad
4713a6737e
TECS: ramp up fast descend over 2_s to ramp down the throttle command
2024-09-13 14:04:39 +02:00
chfriedrich98
741ea6b707
differential: add individual parameters for speed and yaw rate feedforward
2024-09-11 13:57:27 +02:00
Roman Bapst
c94c1ce4d2
Navigator: Support straight line mission landings ( #23576 )
...
* introduced altitude acceptance radius in position setpoint for fixed
wing guidance
- allows navigator to explicitly set the altitude acceptance radius
- needed for staright line landing support
* added ignore_alt_acceptance to position setpoint message to allow guidance
logic to ignore altitude error on waypoint
- can be useful to prevent loitering at a waypoint within a mission landing sequence
* only set altitude acceptance radius to infinity for a waypoint inside a mission landing
for fixed wing vehicles
* navigator: return altitude acceptance radius from triplet if it's valid
* FixedWingPositionControl: check if alt acceptance radius provided in position setpoint
is larger 0
---------
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Co-authored-by: Alvaro Fernandez <alvaro@auterion.com>
2024-09-10 17:44:24 +02:00
bresch
15e9c65a8f
dist-sensor: reduce enum names
2024-09-09 15:40:40 +02:00
Alexander Lerach
3d36c8519d
drivers/power_monitor: Implement temperature sensor support for INA228 / INA238
2024-09-05 23:09:01 -04:00
Matthias Grob
e4d25df58a
Consistently use "stick gesture" for "rc stick gesture"
2024-09-05 18:06:29 +02:00
Silvan Fuhrer
d967cdbb48
Manual control: rename SOURCE_RC_STICK_GESTURE to SOURCE_MANUAL_CONTROL_GESTURE
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-09-05 18:06:29 +02:00
Konrad
80d4fad624
DistanceSensorCheck: do not raise a distance sensor failure if the SFXX_MODE is set to 2 and we are in a VTOL FX flight phase
2024-09-03 15:53:09 +02:00
Julian Oes
cd63cfed3a
remoteid: implement System as sent from GCS
...
This will send the System message if it is already being sent by a ground
station. Otherwise, it will assemble the message itself using the
takeoff/home location.
2024-09-02 16:20:10 +12:00
Julian Oes
7d1d398984
remoteid: add SelfID message
2024-09-02 16:20:10 +12:00
Julian Oes
04ea4f9b3a
uavcan: add OpenDroneID ArmStatus, operator ID
...
In order to have operator ID be sent by QGC, we need to forward
ArmStatus from the remote ID module (here on DroneCAN) to MAVLink.
2024-09-02 16:20:10 +12:00
Daniel Agar
5b0014cb06
ekf2: remove legacy accel z bias checks ( #23341 )
...
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
2024-08-29 11:51:27 -04:00
chfriedrich98
f8188f0981
differential: update module ( #23629 )
...
Improve the slow down effect and add support for speed change in mission mode.
Seperate code related to turning setpoints into motor commands into its own folder and refactor code.
2024-08-29 15:27:08 +02:00
Daniel Agar
6c24413888
ekf2: filter flow vel (used for flow velocity reset)
...
- individual flow samples can be quite erratic
2024-08-27 10:38:17 -04:00
jmackay2
5fff1ad6d1
Fix spelling of airflow sensor msg comments
2024-08-27 09:23:43 +02:00
bresch
1a0f97ebbd
ekf2-fake pos: add valid fake position fusion
...
This is similar to fake pos but is only used when the ekf has an
external information telling it that the vehicle is not changing
position. This information can then be used to keep a valid local
position even when the vehicle isn't exactly at rest.
2024-08-23 11:17:21 +02:00
bresch
4ed3e9e210
navigator: add failure enum
2024-08-14 11:08:02 +02:00
bresch
25fcb3c913
comander: trigger failsafe when navigator reports failure
2024-08-14 11:08:02 +02:00
bresch
9f69e9ee6c
navigator: publish navigator_state
...
feedback to commander
2024-08-14 11:08:02 +02:00
Jaeyoung Lim
e008ca24f1
Remove euler angles from attitude setpoint ( #23482 )
...
* Remove euler angles from attitude setpoint message
* Remove usage of euler angles in attitude setpoint messages
This commit removes the usage of euler angles in the vehicle_attitude_setpoint messages
* Fix standard vtol
2024-08-12 16:42:51 +02:00
Silvan Fuhrer
b01c179eed
NavigatorMissionItem.msg: remove instance_count
...
This information is duplicate to mission_result/mission_id.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-08-08 13:37:36 +02:00
Claudio Chies
28a0de63c5
Orbit Yaw Vehicle Parameter ( #23358 )
2024-08-07 11:12:52 +02:00
chfriedrich98
33d99a13e8
differential: restructure and update module ( #23430 )
...
* differential: rename module
* differential: restructure and update module
2024-08-07 09:53:37 +02:00
Matthias Grob
ba579245fb
battery_status: remove unused smart battery mode
2024-07-30 14:37:11 +02:00
Matthias Grob
a18c18e163
battery_status: remove custom_faults
2024-07-30 14:37:11 +02:00
Matthias Grob
2e66bbdfb8
battery_status: add failed to arm fault instead of duplicate over temperature
2024-07-30 14:37:11 +02:00
chfriedrich98
f8bebd9e41
ackermann: implement pure pursuit lib
2024-07-19 14:43:40 +02:00
Matthias Grob
f2bca92221
Fix duplicate newlines at the end of files
2024-07-19 14:33:36 +02:00
Matthias Grob
7f14110bb1
Fix missing newlines at the end of files
2024-07-19 14:33:36 +02:00
