parameters: new parameter server backend

- parameter backend is now running in a wq and accessible over pub/sub - parameters library can call into backend directly (with locking), but operations will gradually start moving to pub/sub - majority of parameters migrated as is, only small changes to parameter autosave and parameter notification that are now performed from the WQ thread
systemcmds/bsondump: new command line utility (extracted from parameters)
2026-05-23 20:37:34 +08:00 · 2022-12-20 09:51:48 -05:00 · 2022-12-19 21:46:37 -05:00 · 2022-12-19 16:50:09 -05:00 · 2022-12-19 13:24:55 -05:00 · 2022-12-19 11:36:48 +01:00
830 changed files with 37411 additions and 14235 deletions
@@ -61,9 +61,13 @@ pipeline {
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -132,8 +136,12 @@ pipeline {
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -152,76 +160,6 @@ pipeline {
          }
        }

-        stage("px4_fmu-v3_test") {
-          stages {
-            stage("build px4_fmu-v3_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2021-09-08'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v3_test'
-                sh 'make px4_fmu-v3_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v3'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v3_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
        stage("px4_fmu-v4_test") {
          stages {
            stage("build px4_fmu-v4_test") {
@@ -271,8 +209,12 @@ pipeline {
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -340,9 +282,13 @@ pipeline {
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -431,6 +377,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -513,6 +460,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                    checkStatus()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                  }
@@ -582,9 +530,13 @@ pipeline {
                    resetParameters()
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -653,8 +605,12 @@ pipeline {
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                    checkStatus()
                    quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                  }
                }
                stage("print topics") {
@@ -728,14 +684,8 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'

-  // run logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
  // status commands
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
@@ -765,7 +715,7 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd status"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "perf latency"'
@@ -779,8 +729,6 @@ void checkStatus() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-  // stop logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
 }

 void resetParameters() {
@@ -819,13 +767,13 @@ void runTests() {

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'

-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "bsondump /fs/mtd_params"'

  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
@@ -16,7 +16,7 @@ jobs:
      matrix:
        config:
          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
-          - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
+          # - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich

@@ -47,6 +47,8 @@ GTAGS
 *.files
 *.includes

+Tools/jlink-nuttx.so
+
 # CLion ignores
 .idea
 cmake-build-*/
@@ -21,11 +21,11 @@
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.1.0+
+	branch = px4_firmware_nuttx-10.3.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
 	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.1.0+
+	branch = px4_firmware_nuttx-10.3.0+
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/simulation/flightgear/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
@@ -133,6 +133,5 @@
        "workbench.settings.enableNaturalLanguageSearch": false,
        "yaml.schemas": {
                "${workspaceFolder}/validation/module_schema.yaml": "${workspaceFolder}/src/modules/*/module.yaml"
-        },
-        "cortex-debug.openocdPath": "${env:PICO_SDK_PATH}/../openocd/src/openocd"       // Added for rp2040
+        }
 }
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2019 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -143,25 +143,17 @@ define_property(GLOBAL PROPERTY PX4_SRC_FILES
 # configuration
 #

-set(CONFIG "px4_sitl_default" CACHE STRING "desired configuration")
-
 include(px4_add_module)
 set(config_module_list)
 set(config_kernel_list)

 # Find Python
-# If using catkin, Python 2 is found since it points
-# to the Python libs installed with the ROS distro
-if (NOT CATKIN_DEVEL_PREFIX)
-	find_package(PythonInterp 3)
-	# We have a custom error message to tell users how to install python3.
-	if (NOT PYTHONINTERP_FOUND)
-		message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
-			"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
-			"    macOS: brew install python")
-	endif()
-else()
-	find_package(PythonInterp REQUIRED)
+find_package(PythonInterp 3)
+# We have a custom error message to tell users how to install python3.
+if(NOT PYTHONINTERP_FOUND)
+	message(FATAL_ERROR "Python 3 not found. Please install Python 3:\n"
+		"    Ubuntu: sudo apt install python3 python3-dev python3-pip\n"
+		"    macOS: brew install python")
 endif()

 option(PYTHON_COVERAGE "Python code coverage" OFF)
@@ -207,6 +199,11 @@ if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/init.cmake")
 	include(init)
 endif()

+#=============================================================================
+# project definition
+#
+project(px4 CXX C ASM)
+
 # CMake build type (Debug Release RelWithDebInfo MinSizeRel Coverage)
 if(NOT CMAKE_BUILD_TYPE)
 	if(${PX4_PLATFORM} STREQUAL "nuttx")
@@ -235,11 +232,6 @@ endif()
 set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS "Debug;Release;RelWithDebInfo;MinSizeRel;Coverage;AddressSanitizer;UndefinedBehaviorSanitizer")
 message(STATUS "cmake build type: ${CMAKE_BUILD_TYPE}")

-#=============================================================================
-# project definition
-#
-project(px4 CXX C ASM)
-
 # Check if LTO option and check if toolchain supports it
 if(LTO)
    include(CheckIPOSupported)
@@ -256,15 +248,9 @@ set(CMAKE_C_STANDARD 11)
 set(CMAKE_C_STANDARD_REQUIRED ON)
 set(CMAKE_EXPORT_COMPILE_COMMANDS ON)

-# For the catkin build process, unset build of dynamically-linked binaries
-# and do not change CMAKE_RUNTIME_OUTPUT_DIRECTORY
-if (NOT CATKIN_DEVEL_PREFIX)
-	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
-	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
-	set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})
-else()
-	SET(BUILD_SHARED_LIBS OFF)
-endif()
+set(CMAKE_RUNTIME_OUTPUT_DIRECTORY ${PX4_BINARY_DIR})
+set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG ${PX4_BINARY_DIR})
+set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE ${PX4_BINARY_DIR})

 #=============================================================================

@@ -309,21 +295,6 @@ endif()

 include(ccache)

-#=============================================================================
-# find programs and packages
-#
-
-# see if catkin was invoked to build this
-if (CATKIN_DEVEL_PREFIX)
-	message(STATUS "catkin ENABLED")
-	find_package(catkin REQUIRED)
-	if (catkin_FOUND)
-		catkin_package()
-	else()
-		message(FATAL_ERROR "catkin not found")
-	endif()
-endif()
-
 #=============================================================================
 # get chip and chip manufacturer
 #
@@ -450,10 +421,10 @@ add_subdirectory(src/lib/metadata EXCLUDE_FROM_ALL)
 add_subdirectory(src/lib/parameters EXCLUDE_FROM_ALL)

 if(${PX4_PLATFORM} STREQUAL "nuttx" AND NOT CONFIG_BUILD_FLAT)
-target_link_libraries(parameters_interface INTERFACE usr_parameters)
-target_link_libraries(kernel_parameters_interface INTERFACE parameters)
+	target_link_libraries(parameters_interface INTERFACE usr_parameters)
+	target_link_libraries(kernel_parameters_interface INTERFACE parameters)
 else()
-target_link_libraries(parameters_interface INTERFACE parameters)
+	target_link_libraries(parameters_interface INTERFACE parameters)
 endif()

 # firmware added last to generate the builtin for included modules
@@ -486,17 +457,13 @@ include(doxygen)
 include(metadata)
 include(package)

-# print size
-add_custom_target(size
-	COMMAND size $<TARGET_FILE:px4>
-	DEPENDS px4
-	WORKING_DIRECTORY ${PX4_BINARY_DIR}
-	USES_TERMINAL
-	)
-
 # install python requirements using configured python
 add_custom_target(install_python_requirements
 	COMMAND ${PYTHON_EXECUTABLE} -m pip install --requirement ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	DEPENDS ${PX4_SOURCE_DIR}/Tools/setup/requirements.txt
 	USES_TERMINAL
 )
+
+if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/cmake/finalize.cmake")
+	include(finalize)
+endif()
@@ -17,6 +17,8 @@ menu "Toolchain"
            bool "posix"
        config PLATFORM_QURT
            bool "qurt"
+        config PLATFORM_ROS2
+            bool "ros2"
    endchoice

    config BOARD_PLATFORM
@@ -24,6 +26,7 @@ menu "Toolchain"
        default "nuttx" if PLATFORM_NUTTX
        default "posix" if PLATFORM_POSIX
        default "qurt" if PLATFORM_QURT
+        default "ros2" if PLATFORM_ROS2

    config BOARD_LOCKSTEP
        bool "Force enable lockstep"
@@ -37,8 +40,8 @@ menu "Toolchain"
        help
            forces nolockstep behaviour, despite REPLAY env variable

-    config BOARD_LINUX
-        bool "Linux OS"
+    config BOARD_LINUX_TARGET
+        bool "Linux OS Target"
        depends on PLATFORM_POSIX
        help
            Board Platform is running the Linux operating system
@@ -324,6 +324,10 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

+jlink-nuttx:
+	$(CC) -shared -fPIC platforms/nuttx/NuttX/nuttx/tools/jlink-nuttx.c -o Tools/jlink-nuttx.so
+
+
 bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status

@@ -31,6 +31,11 @@ then
 	set PARAM_FILE /dev/eeeprom0
 fi

+if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/qspi/params
+then
+	set PARAM_FILE /mnt/qspi/params
+fi
+
 #
 # Load parameters.
 #
@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8

 param set-default FW_L1_PERIOD 12
@@ -41,7 +40,6 @@ param set-default FW_T_SINK_MIN 2.2

 param set-default FW_W_EN 1

-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -5,7 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -24,7 +23,6 @@ param set-default FW_RR_P 0.085

 param set-default FW_W_EN 1

-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -33,11 +31,7 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
-
-param set-default RWTO_MAX_PITCH 20
-
 param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8

 param set-default CA_AIRFRAME 1

@@ -5,7 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -24,7 +23,6 @@ param set-default FW_RR_P 0.085

 param set-default FW_W_EN 1

-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -33,11 +31,7 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
-
-param set-default RWTO_MAX_PITCH 20
-
 param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8

 param set-default CA_AIRFRAME 1

@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8

 param set-default FW_L1_PERIOD 15
@@ -27,7 +26,6 @@ param set-default FW_L1_PERIOD 12

 param set-default FW_W_EN 1

-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -5,7 +5,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -24,7 +23,6 @@ param set-default FW_RR_P 0.085

 param set-default FW_W_EN 1

-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -33,9 +31,7 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
-param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8

 param set-default CA_AIRFRAME 1

@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8

 param set-default FW_L1_PERIOD 12
@@ -34,14 +33,11 @@ param set-default FW_T_TAS_TC 2

 param set-default FW_W_EN 1

-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

-param set-default FW_USE_NPFG 1
-
 param set-default RWTO_TKOFF 1

 param set-default CA_AIRFRAME 1
@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0

-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 param set-default FW_THR_LND_MAX 0

@@ -31,7 +30,6 @@ param set-default FW_T_SINK_MIN 2.2

 param set-default FW_W_EN 1

-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -18,7 +18,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -18,7 +18,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -25,7 +25,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -18,7 +18,6 @@ param set-default GND_THR_CRUISE 0.85
 param set-default GND_THR_MAX 1
 param set-default GND_THR_MIN 0

-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2
@@ -20,7 +20,6 @@ param set-default FW_W_EN 1

 param set-default FW_RR_P 0.08

-param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 3

 param set-default NAV_ACC_RAD 20
@@ -20,7 +20,6 @@ param set-default FW_W_EN 1

 param set-default FW_RR_P 0.08

-param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 7

 param set-default NAV_ACC_RAD 20
@@ -3,7 +3,7 @@

 udp_offboard_port_local=$((14580+px4_instance))
 udp_offboard_port_remote=$((14540+px4_instance))
-[ $px4_instance -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
+[ "$px4_instance" -gt 9 ] && udp_offboard_port_remote=14549 # use the same ports for more than 10 instances to avoid port overlaps
 udp_onboard_payload_port_local=$((14280+px4_instance))
 udp_onboard_payload_port_remote=$((14030+px4_instance))
 udp_onboard_gimbal_port_local=$((13030+px4_instance))
@@ -13,108 +13,97 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		sensor_mag_sim start

 	else
-		echo "ERROR  [init] simulator_sih failed to start"
+		echo "ERROR [init] simulator_sih failed to start"
 		exit 1
 	fi

 elif [ "$PX4_SIMULATOR" = "gz" ]; then

 	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
-	if [ -f gazebo_env.sh ]; then
+	if [ -f ./gazebo_env.sh ]; then
 		. ./gazebo_env.sh
+
 	elif [ -f ../gazebo_env.sh ]; then
 		. ../gazebo_env.sh
 	fi

-# shellcheck disable=SC2236
-	if [ ! -z $PX4_GZ_VERBOSE ]; then
-		if [ "$PX4_GZ_VERBOSE" -le "4" ] && [ "$PX4_GZ_VERBOSE" -ge "1" ]; then
-			gz_verbose=$PX4_GZ_VERBOSE
-		else
-			gz_verbose=4
-			echo "WARN  [init] PX4_GZ_VERBOSE was passed: $PX4_GZ_VERBOSE, not in range [1,4], defaulting to: $gz_verbose."
-		fi
-		echo "INFO  [init] PX4_GZ_VERBOSE set to $gz_verbose."
-	else
-		gz_verbose=1
-		echo "INFO  [init] PX4_GZ_VERBOSE not explicitly set, defaulting to: $gz_verbose."
-	fi
+	gz_command="ign" # "ign" before garden
+	gz_sub_command="gazebo" # "gazebo" before garden

-	gz_world=$( ign topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
-	
-	gz_version_major=$( ign gazebo --versions | sed 's/\..*//g' )
-	gz_version_minor=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/\..*//g' )
-	gz_version_point=$( ign gazebo --versions | sed 's/'"${gz_version_major}"\.'//; s/'"${gz_version_minor}"\.'//')
+	# look for running ${gz_command} gazebo world
+	gz_world=$( ${gz_command} topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )

-	if [ "$gz_version_major" -gt "6" ] || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -gt "12" ]; } || { [ "$gz_version_major" -eq "6" ] && [ "$gz_version_minor" -eq "12" ] && [ "$gz_version_point" -gt "0" ]; }; then
-		echo "INFO  [init] using latest version of MultiCopterMotor plugin."
-	else
-		echo "WARN  [init] using older version of MultiCopterMotor plugin, please update to latest gazebo > 6.12.0."
-		if [ "$PX4_SIM_MODEL" = "x500" ]; then
-			PX4_SIM_MODEL="x500-Legacy"
-			echo "WARN  [init] setting PX4_SIM_MODEL -> $PX4_SIM_MODEL from x500 till gazebo > 6.12.0"
-		fi
-	fi
+	# shellcheck disable=SC2153
+	if [ -z "${gz_world}" ] && [ -n "${PX4_GZ_WORLDS}" ] && [ -n "${PX4_GZ_WORLD}" ]; then

-	if [ -z $gz_world ]; then
+		echo "INFO  [init] starting gazebo with world: ${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf"

-		# starting ign gazebo with ${PX4_GZ_WORLD} world
-		echo "INFO  [init] starting ign gazebo"
-# shellcheck disable=SC2153
-		ign gazebo --verbose=$gz_verbose -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
+		${gz_command} ${gz_sub_command} --verbose=1 -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &

-		if [ -z $HEADLESS ]; then
+		if [ -z "${HEADLESS}" ]; then
 			# HEADLESS not set, starting ign gazebo gui
-			ign gazebo -g &
+			${gz_command} gazebo -g &
 		fi
+
 	else
-		echo "INFO  [init] ign gazebo already running world: $gz_world"
-		PX4_GZ_WORLD=$gz_world
+		echo "INFO  [init] gazebo already running world: ${gz_world}"
+		PX4_GZ_WORLD=${gz_world}
 	fi

-# shellcheck disable=SC2236
-	if [ ! -z $PX4_GZ_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ]; then
+	# start gz_bridge
+	if [ -n "${PX4_GZ_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ]; then
+		# model specified, gz_bridge will spawn model

-# shellcheck disable=SC2236
-		if [ ! -z $PX4_GZ_MODEL_POSE ]; then
+		if [ -n "${PX4_GZ_MODEL_POSE}" ]; then
 			# Clean potential input line formatting.
-			model_pose="$( echo ${PX4_GZ_MODEL_POSE} | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
+			model_pose="$( echo "${PX4_GZ_MODEL_POSE}" | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
 			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
+
 		else
 			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
 			model_pose="0,0,0,0,0,0"
 		fi
+
 		# start gz bridge with pose arg.
-		if gz_bridge start -p "${model_pose}"  -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+		if gz_bridge start -p "${model_pose}" -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
+
 		else
-			echo "ERROR  [init] ign gazebo failed to start"
+			echo "ERROR [init] gazebo failed to start"
 			exit 1
 		fi
-	elif [ ! -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
+
+	elif [ -n "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
+		# model name specificed, gz_bridge will attach to existing model
+
 		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
+
 		else
-			echo "ERROR  [init] ign gazebo failed to start"
+			echo "ERROR [init] gazebo failed to start"
 			exit 1
 		fi
-	elif [ ! -z $PX4_SIM_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
+
+	elif [ -n "${PX4_SIM_MODEL}" ] && [ -z "${PX4_GZ_MODEL_NAME}" ] && [ -z "${PX4_GZ_MODEL}" ]; then
+
 		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
+
 		if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
+
 		else
-			echo "ERROR  [init] ign gazebo failed to start"
+			echo "ERROR [init] gazebo failed to start"
 			exit 1
 		fi

 	else
-		echo "ERROR  [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
+		echo "ERROR [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
 		exit 1
 	fi

@@ -131,13 +120,13 @@ else
 			echo "PX4 SIM HOST: localhost"
 			simulator_mavlink start -c $simulator_tcp_port
 		else
-			echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
-			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
+			echo "PX4 SIM HOST: ${PX4_SIM_HOST_ADDR}"
+			simulator_mavlink start -t "${PX4_SIM_HOST_ADDR}" "${simulator_tcp_port}"
 		fi

 	else
-		echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
-		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
+		echo "PX4 SIM HOST: ${PX4_SIM_HOSTNAME}"
+		simulator_mavlink start -h "${PX4_SIM_HOSTNAME}" "${simulator_tcp_port}"
 	fi

 fi
@@ -74,7 +74,7 @@ if [ -f $PARAM_FILE ]; then
 	then
 		echo "ERROR [init] param import failed"

-		param dump $PARAM_FILE
+		bsondump $PARAM_FILE

 		# try to make a backup copy
 		cp $PARAM_FILE param_import_fail.bson
@@ -85,7 +85,7 @@ if [ -f $PARAM_FILE ]; then
 			echo "[init] importing from parameter backup"

 			# dump current backup file contents for comparison
-			param dump $PARAM_BACKUP_FILE
+			bsondump $PARAM_BACKUP_FILE

 			param import $PARAM_BACKUP_FILE

@@ -142,7 +142,9 @@ then
 	param set CAL_GYRO2_ID 1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION

 	param set CAL_MAG0_ID 197388
+	param set CAL_MAG0_PRIO 50
 	param set CAL_MAG1_ID 197644
+	param set CAL_MAG1_PRIO 50

 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
@@ -225,7 +227,7 @@ then
 elif [ ! -e "$autostart_file" ] && [ "$SYS_AUTOSTART" -ne "0" ]
 then
 	echo "Error: no autostart file found ($autostart_file)"
-	exit 1
+	#exit 1
 fi

 #user defined params for instances can be in PATH
@@ -260,7 +262,19 @@ fi
 navigator start

 # Try to start the microdds_client with UDP transport if module exists
-microdds_client start -t udp -p 8888
+microdds_ns=""
+if [ "$px4_instance" -ne "0" ]
+then
+	# Assign new xrce dds key based on instance number and set default namespace
+	param set XRCE_DDS_KEY ${px4_instance}
+	microdds_ns="-n px4_$px4_instance"
+fi
+if [ -n "$PX4_MICRODDS_NS" ]
+then
+	# Override namespace if environment variable is defined
+	microdds_ns="-n $PX4_MICRODDS_NS"
+fi
+microdds_client start -t udp -p 8888 $microdds_ns

 if param greater -s MNT_MODE_IN -1
 then
@@ -31,7 +31,6 @@ param set-default MC_PITCH_P 6
 param set-default MC_PITCHRATE_P 0.2
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.3
-param set-default MIS_LTRMIN_ALT 10
 param set-default MIS_TAKEOFF_ALT 10
 param set-default MIS_YAW_TMT 10

@@ -39,7 +39,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0

-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 0.5
@@ -44,7 +44,6 @@ param set-default GND_SPEED_D 0.001
 param set-default GND_SPEED_IMAX 0.125
 param set-default GND_SPEED_THR_SC 1

-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 0.5
@@ -45,7 +45,6 @@ param set-default GND_SPEED_D 0.001
 param set-default GND_SPEED_IMAX 0.125
 param set-default GND_SPEED_THR_SC 1

-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 0.5
@@ -13,7 +13,6 @@ param set-default MAV_TYPE 11
 #
 # Default parameters for UGVs.
 #
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 2
@@ -43,8 +43,8 @@ param set-default RTL_LAND_DELAY -1
 param set-default NAV_ACC_RAD 10

 param set-default MIS_DIST_WPS 5000
-param set-default MIS_LTRMIN_ALT 25
 param set-default MIS_TAKEOFF_ALT 25
+param set-default MIS_TKO_LAND_REQ 2

 #
 # FW takeoff acceleration can easily exceed ublox GPS 2G default.
@@ -13,7 +13,6 @@ param set-default MAV_TYPE 10
 #
 # Default parameters for UGVs.
 #
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01

 param set-default NAV_ACC_RAD 2
@@ -19,6 +19,7 @@ param set-default EKF2_FUSE_BETA 1
 param set-default HTE_VXY_THR 2.0

 param set-default MIS_DIST_WPS 5000
+param set-default MIS_TKO_LAND_REQ 2

 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_VEL_MANUAL 5
@@ -130,7 +130,7 @@ else
 		echo "ERROR [init] param import failed"
 		set STARTUP_TUNE 2 # tune 2 = ERROR_TUNE

-		param dump $PARAM_FILE
+		bsondump $PARAM_FILE

 		if [ -d "/fs/microsd" ]
 		then
@@ -143,7 +143,7 @@ else
 				echo "[init] importing from parameter backup"

 				# dump current backup file contents for comparison
-				param dump $PARAM_BACKUP_FILE
+				bsondump $PARAM_BACKUP_FILE

 				param import $PARAM_BACKUP_FILE

@@ -162,7 +162,7 @@ else
 		param select-backup $PARAM_BACKUP_FILE
 	fi

-	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X
+	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X ARK_FMU_V6X
 	then
 		netman update -i eth0
 	fi
@@ -43,13 +43,13 @@ do
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param reset SYS_HITL'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param save'
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/mtd_params'

 	${DIR}/reboot.py --device ${SERIAL_DEVICE}

 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/mtd_params' || true
-	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/parameters_backup.bson' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/mtd_params' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'bsondump /fs/microsd/parameters_backup.bson' || true

 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'ps'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'work_queue status'
@@ -28,7 +28,7 @@ args = parser.parse_args()
 verbose = args.verbose

 build_configs = []
-excluded_boards = ['modalai_voxl2']  # TODO: fix and enable
+excluded_boards = ['modalai_voxl2', 'px4_ros2']  # TODO: fix and enable
 excluded_manufacturers = ['atlflight']
 excluded_platforms = ['qurt']
 excluded_labels = [
@@ -122,21 +122,13 @@ def generate_output_from_file(format_idx, filename, outputdir, package, template
    for field in spec.parsed_fields():
        field_name_and_type.update({field.name: field.type})

-    # assert if the timestamp field exists
-    try:
-        assert 'timestamp' in field_name_and_type
-    except AssertionError:
-        print("[ERROR] uORB topic files generator:\n\tgenerate_output_from_file:\tNo 'timestamp' field found in " +
-              spec.short_name + " msg definition!")
-        exit(1)
-
    # assert if the timestamp field is of type uint64
-    try:
-        assert field_name_and_type.get('timestamp') == 'uint64'
-    except AssertionError:
-        print("[ERROR] uORB topic files generator:\n\tgenerate_output_from_file:\t'timestamp' field in " + spec.short_name +
-              " msg definition is not of type uint64 but rather of type " + field_name_and_type.get('timestamp') + "!")
-        exit(1)
+    # try:
+    #     assert field_name_and_type.get('timestamp') == 'uint64'
+    # except AssertionError:
+    #     print("[ERROR] uORB topic files generator:\n\tgenerate_output_from_file:\t'timestamp' field in " + spec.short_name +
+    #           " msg definition is not of type uint64 but rather of type " + field_name_and_type.get('timestamp') + "!")
+    #     exit(1)

    topics = get_topics(filename)

@@ -136,9 +136,9 @@ serial_ports = {
        "default_baudrate": 1, # set default to an unusable value to detect that this serial port has not been configured
        },

-    # Pixhawk Payload Bus
-    "PPB": {
-        "label": "Pixhawk Payload Bus",
+    # EXT2
+    "EXT2": {
+        "label": "EXT2",
        "index": 401,
        "default_baudrate": 57600,
        },
@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<model>
-  <name>x500-Legacy</name>
-  <version>1.0</version>
-  <sdf version="1.9">model.sdf</sdf>
-  <author>
-    <name>Benjamin Perseghetti</name>
-    <email>bperseghetti@rudislabs.com</email>
-  </author>
-  <description>Model of the NXP HoverGames Drone development kit (KIT-HGDRONEK66). The PX4 software compatible kit provides mechanical, RC remote and other components needed to evaluate the RDDRONE-FMUK66 reference design. The FMU includes 100Base-T1 Automotive Ethernet, dual CAN transceivers, as well as SE050 secure element, and works with add on boards NavQPlus, MR-T1ETH8, MR-T1ADAPT, and CAN-nodes such as UCANS32K1SIC.  Kit may be used with, and contains the components needed for the HoverGames.com coding challenges.</description>
-</model>
@@ -1,76 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<sdf version='1.9'>
-  <model name='x500-Legacy'>
-    <include merge='true'>
-      <uri>model://x500-NoPlugin</uri>
-    </include>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>/x500-Legacy_0</robotNamespace>
-      <jointName>rotor_0_joint</jointName>
-      <linkName>rotor_0</linkName>
-      <turningDirection>ccw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>0</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>/x500-Legacy_0</robotNamespace>
-      <jointName>rotor_1_joint</jointName>
-      <linkName>rotor_1</linkName>
-      <turningDirection>ccw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>1</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>/x500-Legacy_0</robotNamespace>
-      <jointName>rotor_2_joint</jointName>
-      <linkName>rotor_2</linkName>
-      <turningDirection>cw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>2</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>/x500-Legacy_0</robotNamespace>
-      <jointName>rotor_3_joint</jointName>
-      <linkName>rotor_3</linkName>
-      <turningDirection>cw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>3</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-  </model>
-</sdf>
@@ -73,4 +73,5 @@ fi
 ant create_run_jar copy_res
 cd out/production

-java -XX:GCTimeRatio=20 -Djava.ext.dirs= -jar jmavsim_run.jar $device $extra_args
+java --add-exports java.base/java.lang=ALL-UNNAMED --add-exports java.desktop/sun.awt=ALL-UNNAMED --add-exports java.desktop/sun.java2d=ALL-UNNAMED \
+	-XX:GCTimeRatio=20 -Djava.ext.dirs= -jar jmavsim_run.jar $device $extra_args
@@ -79,8 +79,9 @@ CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -36,9 +37,11 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -54,6 +57,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -118,12 +140,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -226,5 +249,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -50,7 +50,7 @@
 #include <arch/board/board.h>

 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"

 #include "stm32.h"
 #include "stm32_can.h"
@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>

-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-flow/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -95,12 +128,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=254
 CONFIG_SCHED_HPWORKSTACKSIZE=3000
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -149,5 +183,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -50,7 +50,7 @@
 #include <arch/board/board.h>

 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"

 #include "stm32.h"
 #include "stm32_can.h"
@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-gps/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -97,12 +130,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -154,5 +188,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -50,7 +50,7 @@
 #include <arch/board/board.h>

 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"

 #include "stm32.h"
 #include "stm32_can.h"
@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-rtk-gps/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -97,12 +130,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -155,5 +189,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -50,7 +50,7 @@
 #include <arch/board/board.h>

 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"

 #include "stm32.h"
 #include "stm32_can.h"
@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_FLASH_CONFIG_G=y
 CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/cannode/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -97,12 +130,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=254
 CONFIG_SCHED_HPWORKSTACKSIZE=3000
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -156,5 +190,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -50,7 +50,7 @@
 #include <arch/board/board.h>

 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"

 #include "stm32.h"
 #include "stm32_can.h"
@@ -6,6 +6,7 @@ CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS7"
 CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS6"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BAROMETER_MS5611=y
@@ -69,6 +70,7 @@ CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
 CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
@@ -80,6 +82,8 @@ CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
@@ -16,6 +16,11 @@ param set-default SENS_EN_INA238 0
 param set-default SENS_EN_INA228 0
 param set-default SENS_EN_INA226 1

-param set-default SYS_USE_IO 1
+if ver hwtypecmp ARKV6X001000 ARKV6X001001 ARKV6X001002 ARKV6X001003 ARKV6X001004 ARKV6X001005 ARKV6X001006 ARKV6X001007
+then
+	param set-default SYS_USE_IO 0
+else
+	param set-default SYS_USE_IO 1
+fi

 safety_button start
@@ -7,6 +7,7 @@
 #
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
@@ -23,10 +24,12 @@ CONFIG_ARMV7M_ICACHE=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
@@ -40,6 +43,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_EXPERIMENTAL=y
@@ -51,7 +73,6 @@ CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -92,5 +113,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="bootloader_main"
@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -14,14 +15,44 @@
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
 # CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_IFUPDOWN is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TELNETD is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/fmu-v6x/nuttx-config"
@@ -40,11 +71,11 @@ CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95751
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x0039
@@ -86,6 +117,8 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_IOB_NBUFFERS=24
 CONFIG_IOB_THROTTLE=0
 CONFIG_IPCFG_BINARY=y
@@ -93,6 +126,7 @@ CONFIG_IPCFG_CHARDEV=y
 CONFIG_IPCFG_PATH="/fs/mtd_net"
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -115,6 +149,7 @@ CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
 CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
 CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_MONITOR=y
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49
 CONFIG_NETUTILS_TELNETD=y
@@ -124,6 +159,7 @@ CONFIG_NET_BROADCAST=y
 CONFIG_NET_ETH_PKTSIZE=1518
 CONFIG_NET_ICMP=y
 CONFIG_NET_ICMP_SOCKET=y
+CONFIG_NET_NACTIVESOCKETS=16
 CONFIG_NET_SOLINGER=y
 CONFIG_NET_TCP=y
 CONFIG_NET_TCPBACKLOG=y
@@ -160,17 +196,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC2_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -208,6 +243,7 @@ CONFIG_STM32H7_PHYSR_100MBPS=0x8
 CONFIG_STM32H7_PHYSR_FULLDUPLEX=0x10
 CONFIG_STM32H7_PHYSR_MODE=0x10
 CONFIG_STM32H7_PHYSR_SPEED=0x8
+CONFIG_STM32H7_PHY_POLLING=y
 CONFIG_STM32H7_PROGMEM=y
 CONFIG_STM32H7_RTC=y
 CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
@@ -229,7 +265,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM1=y
 CONFIG_STM32H7_TIM4=y
@@ -290,6 +325,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y
@@ -325,7 +325,6 @@
 /* RC Serial port */

 #define RC_SERIAL_PORT                     "/dev/ttyS5"
-#define RC_SERIAL_SINGLEWIRE

 /* Input Capture Channels. */
 #define INPUT_CAP1_TIMER                  1
@@ -375,11 +374,11 @@
 /* SD card bringup does not work if performed on the IDLE thread because it
 * will cause waiting.  Use either:
 *
- *  CONFIG_LIB_BOARDCTL=y, OR
+ *  CONFIG_BOARDCTL=y, OR
 *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
 */

-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARDCTL) && \
   !defined(CONFIG_BOARD_INITTHREAD)
 #  warning SDIO initialization cannot be perfomed on the IDLE thread
 #endif
@@ -46,6 +46,7 @@
 #include <stm32_uart.h>
 #include <arch/board/board.h>
 #include "arm_internal.h"
+#include <px4_platform/gpio.h>
 #include <px4_platform_common/init.h>

 extern int sercon_main(int c, char **argv);
@@ -54,6 +55,15 @@ __EXPORT void board_on_reset(int status) {}

 __EXPORT void stm32_boardinitialize(void)
 {
+	/* configure pins */
+	const uint32_t list[] = PX4_GPIO_INIT_LIST;
+
+	for (size_t gpio = 0; gpio < arraySize(list); gpio++) {
+		if (list[gpio] != 0) {
+			px4_arch_configgpio(list[gpio]);
+		}
+	}
+
 	/* configure USB interfaces */
 	stm32_usbinitialize();
 }
@@ -65,7 +65,7 @@ uint16_t board_get_can_interfaces(void)
 #include <arch/board/board.h>

 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"

 #include "chip.h"
 #include "stm32_can.h"
@@ -105,6 +105,7 @@ __EXPORT void board_peripheral_reset(int ms)
 {
 	/* set the peripheral rails off */

+	VDD_5V_HIPOWER_EN(false);
 	VDD_5V_PERIPH_EN(false);
 	board_control_spi_sensors_power(false, 0xffff);
 	VDD_3V3_SENSORS4_EN(false);
@@ -123,6 +124,7 @@ __EXPORT void board_peripheral_reset(int ms)
 	VDD_3V3_SPEKTRUM_POWER_EN(last);
 	board_control_spi_sensors_power(true, 0xffff);
 	VDD_3V3_SENSORS4_EN(true);
+	VDD_5V_HIPOWER_EN(true);
 	VDD_5V_PERIPH_EN(true);

 }
@@ -209,7 +211,6 @@ stm32_boardinitialize(void)
 __EXPORT int board_app_initialize(uintptr_t arg)
 {
 	/* Power on Interfaces */
-	VDD_3V3_SD_CARD_EN(true);
 	VDD_5V_PERIPH_EN(true);
 	VDD_5V_HIPOWER_EN(true);
 	VDD_3V3_SENSORS4_EN(true);
@@ -42,11 +42,6 @@ static const px4_mft_device_t i2c3 = {             // 24LC64T on Base  8K 32 X 2
 	.bus_type = px4_mft_device_t::I2C,
 	.devid    = PX4_MK_I2C_DEVID(3, 0x51)
 };
-static const px4_mft_device_t i2c4 = {             // 24LC64T on IMU   8K 32 X 256
-	.bus_type =  px4_mft_device_t::I2C,
-	.devid    =  PX4_MK_I2C_DEVID(4, 0x50)
-};
-

 static const px4_mtd_entry_t fmum_fram = {
 	.device = &spi5,
@@ -84,34 +79,11 @@ static const px4_mtd_entry_t base_eeprom = {
 	},
 };

-static const px4_mtd_entry_t imu_eeprom = {
-	.device = &i2c4,
-	.npart = 3,
-	.partd = {
-		{
-			.type = MTD_CALDATA,
-			.path = "/fs/mtd_caldata",
-			.nblocks = 240
-		},
-		{
-			.type = MTD_MFT_REV,
-			.path = "/fs/mtd_mft_rev",
-			.nblocks = 8
-		},
-		{
-			.type = MTD_ID,
-			.path = "/fs/mtd_id",
-			.nblocks = 8 // 256 = 32 * 8
-		}
-	},
-};
-
 static const px4_mtd_manifest_t board_mtd_config = {
-	.nconfigs   = 3,
+	.nconfigs   = 2,
 	.entries = {
 		&fmum_fram,
 		&base_eeprom,
-		&imu_eeprom
 	}
 };

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>

-#include <arm_arch.h>
+#include "arm_internal.h"
 #include <chip.h>
 #include <stm32_gpio.h>
 #include <stm32_otg.h>
@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_FS_PROCFS_EXCLUDE_ENVIRON is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
@@ -41,9 +42,11 @@ CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -59,6 +62,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -127,12 +149,13 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -234,5 +257,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -55,7 +55,7 @@
 #include <uORB/uORB.h>
 #include <uORB/Publication.hpp>

-#include <arm_arch.h>
+#include <arm_internal.h>
 #include "board_config.h"
 #include <stm32_pwr.h>

@@ -76,8 +76,9 @@ CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y
@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_FS_PROCFS_EXCLUDE_ENVIRON is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
@@ -53,15 +54,36 @@ CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -116,6 +138,7 @@ CONFIG_NET_ARP_SEND=y
 CONFIG_NET_BROADCAST=y
 CONFIG_NET_ICMP=y
 CONFIG_NET_ICMP_SOCKET=y
+CONFIG_NET_NACTIVESOCKETS=16
 CONFIG_NET_SOLINGER=y
 CONFIG_NET_TCP=y
 CONFIG_NET_TCPBACKLOG=y
@@ -149,12 +172,13 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -266,5 +290,5 @@ CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_RXDMA=y
 CONFIG_USART6_TXBUFSIZE=1500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -114,11 +114,11 @@
 /* SD card bringup does not work if performed on the IDLE thread because it
 * will cause waiting.  Use either:
 *
- *  CONFIG_LIB_BOARDCTL=y, OR
+ *  CONFIG_BOARDCTL=y, OR
 *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
 */

-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && !defined(CONFIG_BOARD_INITTHREAD)
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARDCTL) && !defined(CONFIG_BOARD_INITTHREAD)
 #  warning SDIO initialization cannot be perfomed on the IDLE thread
 #endif

@@ -35,8 +35,8 @@ add_compile_options(-Wno-cast-align)

 include(ExternalProject)
 ExternalProject_Add(librobotcontrol
-	GIT_REPOSITORY https://github.com/dagar/librobotcontrol.git
-	GIT_TAG 1abcb0a # latest as of 2019-12-29
+        GIT_REPOSITORY https://github.com/beagleboard/librobotcontrol.git
+        GIT_TAG 290e14f
 	CMAKE_CACHE_ARGS -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE}
 	INSTALL_COMMAND ""
 	TEST_COMMAND ""
@@ -1,5 +1,5 @@
 CONFIG_PLATFORM_POSIX=y
-CONFIG_BOARD_LINUX=y
+CONFIG_BOARD_LINUX_TARGET=y
 CONFIG_BOARD_TOOLCHAIN="arm-linux-gnueabihf"
 CONFIG_BOARD_ARCHITECTURE="cortex-a8"
 CONFIG_BOARD_TESTING=y
@@ -63,6 +63,7 @@ CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DYN=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
 CONFIG_SYSTEMCMDS_PARAM=y
@@ -82,6 +83,4 @@ CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
 CONFIG_EXAMPLES_HELLO=y
 CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
 CONFIG_EXAMPLES_PX4_SIMPLE_APP=y
-CONFIG_EXAMPLES_ROVER_STEERING_CONTROL=y
-CONFIG_EXAMPLES_UUV_EXAMPLE_APP=y
 CONFIG_EXAMPLES_WORK_ITEM=y
@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -36,9 +37,11 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -54,6 +57,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -115,12 +137,13 @@ CONFIG_RAM_SIZE=196608
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -184,5 +207,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -44,7 +44,7 @@
 #include <systemlib/px4_macros.h>
 #include <nuttx/mmcsd.h>

-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <chip.h>
 #include <stm32_gpio.h>
 #include "board_config.h"
@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>

-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -35,9 +36,11 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -52,6 +55,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -114,12 +136,13 @@ CONFIG_RAM_SIZE=196608
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -183,5 +206,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"
@@ -44,7 +44,7 @@
 #include <systemlib/px4_macros.h>
 #include <nuttx/mmcsd.h>

-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <chip.h>
 #include <stm32_gpio.h>
 #include "board_config.h"
@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>

-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -59,4 +78,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096
@@ -9,15 +9,41 @@
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_STM32_DMACAPABLE is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
@@ -35,9 +61,8 @@ CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -61,8 +86,11 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -77,9 +105,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -98,12 +123,12 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -151,5 +176,3 @@ CONFIG_USART2_BAUD=57600
 CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
@@ -50,7 +50,7 @@
 #include <arch/board/board.h>

 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"

 #include "stm32.h"
 #include "stm32_can.h"
@@ -81,8 +81,9 @@ CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y
@@ -7,6 +7,7 @@
 #
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
@@ -23,10 +24,12 @@ CONFIG_ARMV7M_ICACHE=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
@@ -40,6 +43,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_EXPERIMENTAL=y
@@ -51,7 +73,7 @@ CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -89,5 +111,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="bootloader_main"
@@ -7,21 +7,48 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/nora/nuttx-config"
@@ -43,8 +70,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004c
@@ -53,7 +80,6 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3163
 CONFIG_CDCACM_VENDORSTR="CUAV"
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -83,8 +109,11 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -103,9 +132,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -127,17 +153,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -187,7 +212,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM15=y
 CONFIG_STM32H7_TIM1=y
@@ -237,6 +261,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y
@@ -27,14 +27,12 @@ CONFIG_COMMON_LIGHT=y
 CONFIG_DRIVERS_LIGHTS_RGBLED_PWM=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
-CONFIG_DRIVERS_OSD=y
 CONFIG_DRIVERS_PCA9685=y
 CONFIG_DRIVERS_PCA9685_PWM_OUT=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_RC_INPUT=y
 CONFIG_DRIVERS_ROBOCLAW=y
-CONFIG_DRIVERS_RPM=y
 CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_SMART_BATTERY_BATMON=y
 CONFIG_COMMON_TELEMETRY=y
@@ -46,6 +44,7 @@ CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
@@ -54,6 +53,7 @@ CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_FW_ATT_CONTROL=y
 CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
@@ -69,7 +69,6 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
@@ -80,10 +79,10 @@ CONFIG_MODULES_SIMULATION_SENSOR_GPS_SIM=y
 CONFIG_MODULES_SIMULATION_SENSOR_MAG_SIM=y
 CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
-CONFIG_MODULES_GIMBAL=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_BSONDUMP=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_GPIO=y
@@ -106,4 +105,3 @@ CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y
 CONFIG_EXAMPLES_FAKE_GPS=y
-#CONFIG_DRIVERS_TRANSPONDER_SAGETECH_MXS=y
@@ -7,6 +7,7 @@
 #
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
@@ -23,10 +24,12 @@ CONFIG_ARMV7M_ICACHE=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
@@ -40,6 +43,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_EXPERIMENTAL=y
@@ -51,7 +73,6 @@ CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -89,5 +110,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="bootloader_main"
@@ -7,21 +7,48 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/x7pro/nuttx-config"
@@ -43,8 +70,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004c
@@ -60,7 +87,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
@@ -84,7 +110,10 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -103,9 +132,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -127,17 +153,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -187,7 +212,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM15=y
 CONFIG_STM32H7_TIM1=y
@@ -237,6 +261,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y
@@ -7,21 +7,48 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/x7pro/nuttx-config"
@@ -43,8 +70,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004c
@@ -60,7 +87,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
@@ -84,7 +110,10 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -103,9 +132,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -127,17 +153,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -187,7 +212,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM15=y
 CONFIG_STM32H7_TIM1=y
@@ -240,6 +264,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y
--- a/Show More
+++ b/Show More