migrate remaining sprintf usage -> snprintf

- libevents in PX4/Firmware (ff161d5eca5ee3e605840dc05642984985fcbf5a): https://github.com/mavlink/libevents/commit/179f86a8fc7fd74cb80630e77b1b9435d3c5b748
    - libevents current upstream: https://github.com/mavlink/libevents/commit/0c8bc543db2f8c78f59214d5bcf959bdadd96677
    - Changes: https://github.com/mavlink/libevents/compare/179f86a8fc7fd74cb80630e77b1b9435d3c5b748...0c8bc543db2f8c78f59214d5bcf959bdadd96677

    0c8bc54 2022-11-07 Beat Küng - README: fix typo
ca1cce0 2022-11-04 Beat Küng - README: add note for usage of UNIT's

.ci/Jenkinsfile-hardware

@@ -61,9 +61,13 @@ pipeline {
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -132,8 +136,12 @@ pipeline {
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "2000"'
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -152,76 +160,6 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v3_test") {
-          stages {
-            stage("build px4_fmu-v3_test") {
-              agent {
-                docker {
-                  image 'px4io/px4-dev-nuttx-focal:2021-09-08'
-                  args '--cpu-shares 512 -e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-                }
-              }
-              steps {
-                checkoutSCM()
-                sh 'make px4_fmu-v3_test'
-                sh 'make px4_fmu-v3_test bootloader_elf'
-                sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/*, platforms/nuttx/NuttX/nuttx/tools/nuttx-gdbinit, Tools/HIL/*', name: 'px4_fmu-v3_test'
-              }
-              post {
-                always {
-                  sh 'make distclean; git clean -ff -x -d .'
-                }
-              }
-            } // stage build
-            stage("hardware") {
-              agent {
-                label 'px4_fmu-v3'
-              }
-              stages {
-                stage("flash") {
-                  steps {
-                    sh 'export'
-                    sh 'find /dev/serial'
-                    unstash 'px4_fmu-v3_test'
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_bootloader.elf'
-                    // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-                    resetBoard()
-                  }
-                }
-                stage("tests") {
-                  steps {
-                    runTests()
-                  }
-                }
-                stage("status") {
-                  steps {
-                    // configure
-                    resetParameters()
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
-                    sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
-                    checkStatus()
-                    quickCalibrate()
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
-                  }
-                }
-                stage("print topics") {
-                  steps {
-                    printTopics()
-                  }
-                }
-              }
-              post {
-                always {
-                  sh 'cat /tmp/pyserial_spy_file.txt || true'
-                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
-                }
-              }
-            } // stage test
-          }
-        }
-
         stage("px4_fmu-v4_test") {
           stages {
             stage("build px4_fmu-v4_test") {
@@ -271,8 +209,12 @@ pipeline {
                     resetParameters()
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -340,9 +282,13 @@ pipeline {
                     resetParameters()
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "13000"'   // generic vtol standard
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -431,6 +377,7 @@ pipeline {
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                     checkStatus()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                   }
@@ -513,6 +460,7 @@ pipeline {
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
                     checkStatus()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                   }
@@ -582,9 +530,13 @@ pipeline {
                     resetParameters()
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -653,8 +605,12 @@ pipeline {
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "IMU_GYRO_RATEMAX" --value "400"'
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_AUTOSTART" --value "4001"'    // generic quadcopter
                     sh './Tools/HIL/nsh_param_set.py --device `find /dev/serial -name *usb-*` --name "SYS_BL_UPDATE" --value "1"'       // update bootloader
+                    sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
+
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"' // run logger
                     checkStatus()
                     quickCalibrate()
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"' // stop logger
                   }
                 }
                 stage("print topics") {
@@ -729,13 +685,7 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
 
-  // run logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
   // status commands
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
@@ -779,8 +729,6 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "uorb top -1 -a" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
-  // stop logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
 }
 
 void resetParameters() {

.gitignore

@@ -47,6 +47,8 @@ GTAGS
 *.files
 *.includes
 
+Tools/jlink-nuttx.so
+
 # CLion ignores
 .idea
 cmake-build-*/

.gitmodules

@@ -21,11 +21,11 @@
 [submodule "platforms/nuttx/NuttX/nuttx"]
 	path = platforms/nuttx/NuttX/nuttx
 	url = https://github.com/PX4/NuttX.git
-	branch = px4_firmware_nuttx-10.1.0+
+	branch = px4_firmware_nuttx-10.3.0+
 [submodule "platforms/nuttx/NuttX/apps"]
 	path = platforms/nuttx/NuttX/apps
 	url = https://github.com/PX4/NuttX-apps.git
-	branch = px4_firmware_nuttx-10.1.0+
+	branch = px4_firmware_nuttx-10.3.0+
 [submodule "Tools/flightgear_bridge"]
 	path = Tools/simulation/flightgear/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git

Makefile

@@ -324,6 +324,10 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
+jlink-nuttx:
+	$(CC) -shared -fPIC platforms/nuttx/NuttX/nuttx/tools/jlink-nuttx.c -o Tools/jlink-nuttx.so
+
+
 bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 

ROMFS/cannode/init.d/rcS

@@ -31,6 +31,11 @@ then
 	set PARAM_FILE /dev/eeeprom0
 fi
 
+if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/qspi/params
+then
+	set PARAM_FILE /mnt/qspi/params
+fi
+
 #
 # Load parameters.
 #

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 
 param set-default FW_L1_PERIOD 12
@@ -41,7 +40,6 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/1033_rascal

@@ -5,7 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -24,7 +23,6 @@ param set-default FW_RR_P 0.085
 
 param set-default FW_W_EN 1
 
-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -33,11 +31,7 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
-
-param set-default RWTO_MAX_PITCH 20
-
 param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8
 
 param set-default CA_AIRFRAME 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -5,7 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -24,7 +23,6 @@ param set-default FW_RR_P 0.085
 
 param set-default FW_W_EN 1
 
-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -33,11 +31,7 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
-
-param set-default RWTO_MAX_PITCH 20
-
 param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8
 
 param set-default CA_AIRFRAME 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1035_techpod

@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 
 param set-default FW_L1_PERIOD 15
@@ -27,7 +26,6 @@ param set-default FW_L1_PERIOD 12
 
 param set-default FW_W_EN 1
 
-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -5,7 +5,6 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-param set-default FW_LND_AIRSPD_SC 1.1
 param set-default FW_LND_ANG 5
 param set-default FW_LND_FL_PMIN 9.5
 param set-default FW_LND_FL_PMAX 20
@@ -24,7 +23,6 @@ param set-default FW_RR_P 0.085
 
 param set-default FW_W_EN 1
 
-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
 param set-default MIS_DIST_1WP 2500
 param set-default MIS_DIST_WPS 10000
@@ -33,9 +31,7 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
-param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
-param set-default RWTO_AIRSPD_SCL 1.8
 
 param set-default CA_AIRFRAME 1
 

ROMFS/px4fmu_common/init.d-posix/airframes/1037_believer

@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 
 param set-default FW_L1_PERIOD 12
@@ -34,14 +33,11 @@ param set-default FW_T_TAS_TC 2
 
 param set-default FW_W_EN 1
 
-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
 
-param set-default FW_USE_NPFG 1
-
 param set-default RWTO_TKOFF 1
 
 param set-default CA_AIRFRAME 1

ROMFS/px4fmu_common/init.d-posix/airframes/1039_advanced_plane

@@ -8,7 +8,6 @@
 param set-default EKF2_MAG_ACCLIM 0
 param set-default EKF2_MAG_YAWLIM 0
 
-param set-default FW_LND_AIRSPD_SC 1
 param set-default FW_LND_ANG 8
 param set-default FW_THR_LND_MAX 0
 
@@ -31,7 +30,6 @@ param set-default FW_T_SINK_MIN 2.2
 
 param set-default FW_W_EN 1
 
-param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30
 
 param set-default NAV_ACC_RAD 15

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -18,7 +18,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0
 
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -18,7 +18,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0
 
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/1062_tf-r1

@@ -25,7 +25,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0
 
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -18,7 +18,6 @@ param set-default GND_THR_CRUISE 0.85
 param set-default GND_THR_MAX 1
 param set-default GND_THR_MIN 0
 
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 param set-default NAV_ACC_RAD 0.5
 param set-default NAV_LOITER_RAD 2

ROMFS/px4fmu_common/init.d-posix/airframes/17001_tf-g1

@@ -20,7 +20,6 @@ param set-default FW_W_EN 1
 
 param set-default FW_RR_P 0.08
 
-param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 3
 
 param set-default NAV_ACC_RAD 20

ROMFS/px4fmu_common/init.d-posix/airframes/17002_tf-g2

@@ -20,7 +20,6 @@ param set-default FW_W_EN 1
 
 param set-default FW_RR_P 0.08
 
-param set-default MIS_LTRMIN_ALT 50
 param set-default MIS_TAKEOFF_ALT 7
 
 param set-default NAV_ACC_RAD 20

ROMFS/px4fmu_common/init.d/airframes/1002_standard_vtol.hil

@@ -31,7 +31,6 @@ param set-default MC_PITCH_P 6
 param set-default MC_PITCHRATE_P 0.2
 param set-default MC_ROLL_P 6
 param set-default MC_ROLLRATE_P 0.3
-param set-default MIS_LTRMIN_ALT 10
 param set-default MIS_TAKEOFF_ALT 10
 param set-default MIS_YAW_TMT 10
 

ROMFS/px4fmu_common/init.d/airframes/50000_generic_ground_vehicle

@@ -39,7 +39,6 @@ param set-default GND_THR_CRUISE 0.3
 param set-default GND_THR_MAX 0.5
 param set-default GND_THR_MIN 0
 
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 
 param set-default NAV_ACC_RAD 0.5

ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover

@@ -44,7 +44,6 @@ param set-default GND_SPEED_D 0.001
 param set-default GND_SPEED_IMAX 0.125
 param set-default GND_SPEED_THR_SC 1
 
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 
 param set-default NAV_ACC_RAD 0.5

ROMFS/px4fmu_common/init.d/airframes/50004_nxpcup_car_dfrobot_gpx

@@ -45,7 +45,6 @@ param set-default GND_SPEED_D 0.001
 param set-default GND_SPEED_IMAX 0.125
 param set-default GND_SPEED_THR_SC 1
 
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 
 param set-default NAV_ACC_RAD 0.5

ROMFS/px4fmu_common/init.d/rc.boat_defaults

@@ -13,7 +13,6 @@ param set-default MAV_TYPE 11
 #
 # Default parameters for UGVs.
 #
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 
 param set-default NAV_ACC_RAD 2

ROMFS/px4fmu_common/init.d/rc.fw_defaults

@@ -43,8 +43,8 @@ param set-default RTL_LAND_DELAY -1
 param set-default NAV_ACC_RAD 10
 
 param set-default MIS_DIST_WPS 5000
-param set-default MIS_LTRMIN_ALT 25
 param set-default MIS_TAKEOFF_ALT 25
+param set-default MIS_TKO_LAND_REQ 2
 
 #
 # FW takeoff acceleration can easily exceed ublox GPS 2G default.

ROMFS/px4fmu_common/init.d/rc.rover_defaults

@@ -13,7 +13,6 @@ param set-default MAV_TYPE 10
 #
 # Default parameters for UGVs.
 #
-param set-default MIS_LTRMIN_ALT 0.01
 param set-default MIS_TAKEOFF_ALT 0.01
 
 param set-default NAV_ACC_RAD 2

ROMFS/px4fmu_common/init.d/rc.vtol_defaults

@@ -19,6 +19,7 @@ param set-default EKF2_FUSE_BETA 1
 param set-default HTE_VXY_THR 2.0
 
 param set-default MIS_DIST_WPS 5000
+param set-default MIS_TKO_LAND_REQ 2
 
 param set-default MPC_ACC_HOR_MAX 2
 param set-default MPC_VEL_MANUAL 5

ROMFS/px4fmu_common/init.d/rcS

@@ -162,7 +162,7 @@ else
 		param select-backup $PARAM_BACKUP_FILE
 	fi
 
-	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X
+	if ver hwcmp PX4_FMU_V5X PX4_FMU_V6X ARK_FMU_V6X
 	then
 		netman update -i eth0
 	fi

Tools/simulation/jmavsim/jmavsim_run.sh

@@ -73,4 +73,5 @@ fi
 ant create_run_jar copy_res
 cd out/production
 
-java -XX:GCTimeRatio=20 -Djava.ext.dirs= -jar jmavsim_run.jar $device $extra_args
+java --add-exports java.base/java.lang=ALL-UNNAMED --add-exports java.desktop/sun.awt=ALL-UNNAMED --add-exports java.desktop/sun.java2d=ALL-UNNAMED \
+	-XX:GCTimeRatio=20 -Djava.ext.dirs= -jar jmavsim_run.jar $device $extra_args

boards/airmind/mindpx-v2/nuttx-config/nsh/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -36,9 +37,11 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -54,6 +57,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -118,12 +140,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -226,5 +249,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/airmind/mindpx-v2/src/can.c

@@ -50,7 +50,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "stm32.h"
 #include "stm32_can.h"

boards/airmind/mindpx-v2/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"
 

boards/ark/can-flow/nuttx-config/canbootloader/defconfig

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096

boards/ark/can-flow/nuttx-config/nsh/defconfig

@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-flow/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -95,12 +128,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=254
 CONFIG_SCHED_HPWORKSTACKSIZE=3000
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -149,5 +183,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/ark/can-flow/src/can.c

@@ -50,7 +50,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "stm32.h"
 #include "stm32_can.h"

boards/ark/can-gps/nuttx-config/canbootloader/defconfig

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096

boards/ark/can-gps/nuttx-config/nsh/defconfig

@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-gps/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -97,12 +130,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -154,5 +188,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/ark/can-gps/src/can.c

@@ -50,7 +50,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "stm32.h"
 #include "stm32_can.h"

boards/ark/can-rtk-gps/nuttx-config/canbootloader/defconfig

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096

boards/ark/can-rtk-gps/nuttx-config/nsh/defconfig

@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/can-rtk-gps/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -97,12 +130,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -155,5 +189,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/ark/can-rtk-gps/src/can.c

@@ -50,7 +50,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "stm32.h"
 #include "stm32_can.h"

boards/ark/cannode/nuttx-config/canbootloader/defconfig

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_FLASH_CONFIG_G=y
 CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096

boards/ark/cannode/nuttx-config/nsh/defconfig

@@ -5,20 +5,51 @@
 # You can then do "make savedefconfig" to generate a new defconfig file that includes your
 # modifications.
 #
-# CONFIG_DISABLE_OS_API is not set
+# CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
-# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
-# CONFIG_STM32_DMACAPABLE is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/cannode/nuttx-config"
@@ -32,8 +63,10 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -97,12 +130,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=254
 CONFIG_SCHED_HPWORKSTACKSIZE=3000
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -156,5 +190,5 @@ CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/ark/cannode/src/can.c

@@ -50,7 +50,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "stm32.h"
 #include "stm32_can.h"

boards/ark/fmu-v6x/default.px4board

@@ -6,6 +6,7 @@ CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS7"
 CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS6"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
+CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BAROMETER_MS5611=y
@@ -80,6 +81,8 @@ CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SD_BENCH=y
+CONFIG_SYSTEMCMDS_SD_STRESS=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y

boards/ark/fmu-v6x/init/rc.board_defaults

@@ -16,6 +16,11 @@ param set-default SENS_EN_INA238 0
 param set-default SENS_EN_INA228 0
 param set-default SENS_EN_INA226 1
 
-param set-default SYS_USE_IO 1
+if ver hwtypecmp ARKV6X001000 ARKV6X001001 ARKV6X001002 ARKV6X001003 ARKV6X001004 ARKV6X001005 ARKV6X001006 ARKV6X001007
+then
+	param set-default SYS_USE_IO 0
+else
+	param set-default SYS_USE_IO 1
+fi
 
 safety_button start

boards/ark/fmu-v6x/nuttx-config/bootloader/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
@@ -23,10 +24,12 @@ CONFIG_ARMV7M_ICACHE=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
@@ -40,6 +43,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_EXPERIMENTAL=y
@@ -51,7 +73,6 @@ CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -92,5 +113,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="bootloader_main"

boards/ark/fmu-v6x/nuttx-config/nsh/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -14,14 +15,44 @@
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
 # CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_IFUPDOWN is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_NSLOOKUP is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TELNETD is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/fmu-v6x/nuttx-config"
@@ -40,11 +71,11 @@ CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95751
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x0039
@@ -86,6 +117,8 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_IOB_NBUFFERS=24
 CONFIG_IOB_THROTTLE=0
 CONFIG_IPCFG_BINARY=y
@@ -93,6 +126,7 @@ CONFIG_IPCFG_CHARDEV=y
 CONFIG_IPCFG_PATH="/fs/mtd_net"
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -115,6 +149,7 @@ CONFIG_NETINIT_DHCPC=y
 CONFIG_NETINIT_DNS=y
 CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
 CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_MONITOR=y
 CONFIG_NETINIT_THREAD=y
 CONFIG_NETINIT_THREAD_PRIORITY=49
 CONFIG_NETUTILS_TELNETD=y
@@ -160,17 +195,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC2_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -208,6 +242,7 @@ CONFIG_STM32H7_PHYSR_100MBPS=0x8
 CONFIG_STM32H7_PHYSR_FULLDUPLEX=0x10
 CONFIG_STM32H7_PHYSR_MODE=0x10
 CONFIG_STM32H7_PHYSR_SPEED=0x8
+CONFIG_STM32H7_PHY_POLLING=y
 CONFIG_STM32H7_PROGMEM=y
 CONFIG_STM32H7_RTC=y
 CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
@@ -229,7 +264,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM1=y
 CONFIG_STM32H7_TIM4=y
@@ -290,6 +324,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y

boards/ark/fmu-v6x/src/board_config.h

@@ -325,7 +325,6 @@
 /* RC Serial port */
 
 #define RC_SERIAL_PORT                     "/dev/ttyS5"
-#define RC_SERIAL_SINGLEWIRE
 
 /* Input Capture Channels. */
 #define INPUT_CAP1_TIMER                  1
@@ -375,11 +374,11 @@
 /* SD card bringup does not work if performed on the IDLE thread because it
  * will cause waiting.  Use either:
  *
- *  CONFIG_LIB_BOARDCTL=y, OR
+ *  CONFIG_BOARDCTL=y, OR
  *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
  */
 
-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARDCTL) && \
    !defined(CONFIG_BOARD_INITTHREAD)
 #  warning SDIO initialization cannot be perfomed on the IDLE thread
 #endif

boards/ark/fmu-v6x/src/bootloader_main.c

@@ -46,6 +46,7 @@
 #include <stm32_uart.h>
 #include <arch/board/board.h>
 #include "arm_internal.h"
+#include <px4_platform/gpio.h>
 #include <px4_platform_common/init.h>
 
 extern int sercon_main(int c, char **argv);
@@ -54,6 +55,15 @@ __EXPORT void board_on_reset(int status) {}
 
 __EXPORT void stm32_boardinitialize(void)
 {
+	/* configure pins */
+	const uint32_t list[] = PX4_GPIO_INIT_LIST;
+
+	for (size_t gpio = 0; gpio < arraySize(list); gpio++) {
+		if (list[gpio] != 0) {
+			px4_arch_configgpio(list[gpio]);
+		}
+	}
+
 	/* configure USB interfaces */
 	stm32_usbinitialize();
 }

boards/ark/fmu-v6x/src/can.c

@@ -65,7 +65,7 @@ uint16_t board_get_can_interfaces(void)
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "chip.h"
 #include "stm32_can.h"

boards/ark/fmu-v6x/src/init.c

@@ -105,6 +105,7 @@ __EXPORT void board_peripheral_reset(int ms)
 {
 	/* set the peripheral rails off */
 
+	VDD_5V_HIPOWER_EN(false);
 	VDD_5V_PERIPH_EN(false);
 	board_control_spi_sensors_power(false, 0xffff);
 	VDD_3V3_SENSORS4_EN(false);
@@ -123,6 +124,7 @@ __EXPORT void board_peripheral_reset(int ms)
 	VDD_3V3_SPEKTRUM_POWER_EN(last);
 	board_control_spi_sensors_power(true, 0xffff);
 	VDD_3V3_SENSORS4_EN(true);
+	VDD_5V_HIPOWER_EN(true);
 	VDD_5V_PERIPH_EN(true);
 
 }
@@ -209,7 +211,6 @@ stm32_boardinitialize(void)
 __EXPORT int board_app_initialize(uintptr_t arg)
 {
 	/* Power on Interfaces */
-	VDD_3V3_SD_CARD_EN(true);
 	VDD_5V_PERIPH_EN(true);
 	VDD_5V_HIPOWER_EN(true);
 	VDD_3V3_SENSORS4_EN(true);

boards/ark/fmu-v6x/src/mtd.cpp

@@ -42,11 +42,6 @@ static const px4_mft_device_t i2c3 = {             // 24LC64T on Base  8K 32 X 2
 	.bus_type = px4_mft_device_t::I2C,
 	.devid    = PX4_MK_I2C_DEVID(3, 0x51)
 };
-static const px4_mft_device_t i2c4 = {             // 24LC64T on IMU   8K 32 X 256
-	.bus_type =  px4_mft_device_t::I2C,
-	.devid    =  PX4_MK_I2C_DEVID(4, 0x50)
-};
-
 
 static const px4_mtd_entry_t fmum_fram = {
 	.device = &spi5,
@@ -84,34 +79,11 @@ static const px4_mtd_entry_t base_eeprom = {
 	},
 };
 
-static const px4_mtd_entry_t imu_eeprom = {
-	.device = &i2c4,
-	.npart = 3,
-	.partd = {
-		{
-			.type = MTD_CALDATA,
-			.path = "/fs/mtd_caldata",
-			.nblocks = 240
-		},
-		{
-			.type = MTD_MFT_REV,
-			.path = "/fs/mtd_mft_rev",
-			.nblocks = 8
-		},
-		{
-			.type = MTD_ID,
-			.path = "/fs/mtd_id",
-			.nblocks = 8 // 256 = 32 * 8
-		}
-	},
-};
-
 static const px4_mtd_manifest_t board_mtd_config = {
-	.nconfigs   = 3,
+	.nconfigs   = 2,
 	.entries = {
 		&fmum_fram,
 		&base_eeprom,
-		&imu_eeprom
 	}
 };
 

boards/ark/fmu-v6x/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include "arm_internal.h"
 #include <chip.h>
 #include <stm32_gpio.h>
 #include <stm32_otg.h>

boards/atl/mantis-edu/nuttx-config/nsh/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_FS_PROCFS_EXCLUDE_ENVIRON is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
@@ -41,9 +42,11 @@ CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -59,6 +62,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -127,12 +149,13 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -234,5 +257,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/atl/mantis-edu/src/pwr.cpp

@@ -55,7 +55,7 @@
 #include <uORB/uORB.h>
 #include <uORB/Publication.hpp>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include "board_config.h"
 #include <stm32_pwr.h>
 

boards/av/x-v1/nuttx-config/nsh/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_FS_PROCFS_EXCLUDE_ENVIRON is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
@@ -53,15 +54,36 @@ CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -149,12 +171,13 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -266,5 +289,5 @@ CONFIG_USART6_RXBUFSIZE=600
 CONFIG_USART6_RXDMA=y
 CONFIG_USART6_TXBUFSIZE=1500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/av/x-v1/src/board_config.h

@@ -114,11 +114,11 @@
 /* SD card bringup does not work if performed on the IDLE thread because it
  * will cause waiting.  Use either:
  *
- *  CONFIG_LIB_BOARDCTL=y, OR
+ *  CONFIG_BOARDCTL=y, OR
  *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
  */
 
-#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && !defined(CONFIG_BOARD_INITTHREAD)
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARDCTL) && !defined(CONFIG_BOARD_INITTHREAD)
 #  warning SDIO initialization cannot be perfomed on the IDLE thread
 #endif
 

boards/beaglebone/blue/adc/adc.cpp

@@ -74,7 +74,7 @@ uint32_t px4_arch_adc_sample(uint32_t base_address, unsigned channel)
 		// ADC_SYSFS_PATH
 		char channel_path[strlen(ADC_SYSFS_PATH) + 20] {};
 
-		if (sprintf(channel_path, "%s/in_voltage%d_raw", ADC_SYSFS_PATH, channel) == -1) {
+		if (snprintf(channel_path, sizeof(channel_path), "%s/in_voltage%d_raw", ADC_SYSFS_PATH, channel) == -1) {
 			PX4_ERR("adc channel: %d\n", channel);
 			return UINT32_MAX; // error
 		}

boards/beaglebone/blue/default.px4board

@@ -82,6 +82,4 @@ CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
 CONFIG_EXAMPLES_HELLO=y
 CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
 CONFIG_EXAMPLES_PX4_SIMPLE_APP=y
-CONFIG_EXAMPLES_ROVER_STEERING_CONTROL=y
-CONFIG_EXAMPLES_UUV_EXAMPLE_APP=y
 CONFIG_EXAMPLES_WORK_ITEM=y

boards/bitcraze/crazyflie/nuttx-config/nsh/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -36,9 +37,11 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -54,6 +57,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -115,12 +137,13 @@ CONFIG_RAM_SIZE=196608
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -184,5 +207,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/bitcraze/crazyflie/src/spi.cpp

@@ -44,7 +44,7 @@
 #include <systemlib/px4_macros.h>
 #include <nuttx/mmcsd.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <chip.h>
 #include <stm32_gpio.h>
 #include "board_config.h"

boards/bitcraze/crazyflie/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"
 

boards/bitcraze/crazyflie21/nuttx-config/nsh/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
@@ -35,9 +36,11 @@ CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -52,6 +55,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -114,12 +136,13 @@ CONFIG_RAM_SIZE=196608
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -183,5 +206,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/bitcraze/crazyflie21/src/spi.cpp

@@ -44,7 +44,7 @@
 #include <systemlib/px4_macros.h>
 #include <nuttx/mmcsd.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <chip.h>
 #include <stm32_gpio.h>
 #include "board_config.h"

boards/bitcraze/crazyflie21/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"
 

boards/cuav/can-gps-v1/nuttx-config/canbootloader/defconfig

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -59,4 +78,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096

boards/cuav/can-gps-v1/nuttx-config/nsh/defconfig

@@ -9,15 +9,41 @@
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_STM32_DMACAPABLE is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
@@ -35,9 +61,8 @@ CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -61,8 +86,11 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -77,9 +105,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -98,12 +123,12 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -151,5 +176,3 @@ CONFIG_USART2_BAUD=57600
 CONFIG_USART2_RXBUFSIZE=600
 CONFIG_USART2_TXBUFSIZE=1100
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"

boards/cuav/can-gps-v1/src/can.c

@@ -50,7 +50,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "stm32.h"
 #include "stm32_can.h"

boards/cuav/nora/nuttx-config/bootloader/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
@@ -23,10 +24,12 @@ CONFIG_ARMV7M_ICACHE=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
@@ -40,6 +43,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_EXPERIMENTAL=y
@@ -51,7 +73,7 @@ CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -89,5 +111,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="bootloader_main"

boards/cuav/nora/nuttx-config/nsh/defconfig

@@ -7,21 +7,48 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/nora/nuttx-config"
@@ -43,8 +70,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004c
@@ -53,7 +80,6 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x3163
 CONFIG_CDCACM_VENDORSTR="CUAV"
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -83,8 +109,11 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -103,9 +132,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -127,17 +153,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -187,7 +212,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM15=y
 CONFIG_STM32H7_TIM1=y
@@ -237,6 +261,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y

boards/cuav/x7pro/nuttx-config/bootloader/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
@@ -23,10 +24,12 @@ CONFIG_ARMV7M_ICACHE=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
@@ -40,6 +43,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_EXPERIMENTAL=y
@@ -51,7 +73,6 @@ CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -89,5 +110,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="bootloader_main"

boards/cuav/x7pro/nuttx-config/nsh/defconfig

@@ -7,21 +7,48 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/x7pro/nuttx-config"
@@ -43,8 +70,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004c
@@ -60,7 +87,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
@@ -84,7 +110,10 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -103,9 +132,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -127,17 +153,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -187,7 +212,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM15=y
 CONFIG_STM32H7_TIM1=y
@@ -237,6 +261,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y

boards/cuav/x7pro/nuttx-config/test/defconfig

@@ -7,21 +7,48 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cuav/x7pro/nuttx-config"
@@ -43,8 +70,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=95150
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x004c
@@ -60,7 +87,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
@@ -84,7 +110,10 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -103,9 +132,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -127,17 +153,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -187,7 +212,6 @@ CONFIG_STM32H7_SPI5=y
 CONFIG_STM32H7_SPI6=y
 CONFIG_STM32H7_SPI6_DMA=y
 CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM12=y
 CONFIG_STM32H7_TIM15=y
 CONFIG_STM32H7_TIM1=y
@@ -240,6 +264,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y

boards/cubepilot/cubeorange/nuttx-config/bootloader/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_SPI_EXCHANGE is not set
 # CONFIG_STM32H7_SYSCFG is not set
 CONFIG_ARCH="arm"
@@ -23,10 +24,12 @@ CONFIG_ARMV7M_ICACHE=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_INITTHREAD_PRIORITY=254
 CONFIG_BOARD_LATE_INITIALIZE=y
 CONFIG_BOARD_LOOPSPERMSEC=79954
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
@@ -40,6 +43,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
 CONFIG_EXPERIMENTAL=y
@@ -51,7 +73,6 @@ CONFIG_IDLETHREAD_STACKSIZE=750
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_PREALLOC_TIMERS=50
@@ -89,5 +110,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="bootloader_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="bootloader_main"

boards/cubepilot/cubeorange/nuttx-config/nsh/defconfig

@@ -8,21 +8,48 @@
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cubepilot/cubeorange/nuttx-config"
@@ -44,8 +71,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=79954
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x1016
@@ -54,7 +81,6 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x2DAE
 CONFIG_CDCACM_VENDORSTR="CubePilot"
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -84,8 +110,11 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -104,9 +133,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -128,17 +154,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -181,7 +206,6 @@ CONFIG_STM32H7_SPI2=y
 CONFIG_STM32H7_SPI4=y
 CONFIG_STM32H7_SPI4_DMA=y
 CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM1=y
 CONFIG_STM32H7_TIM3=y
 CONFIG_STM32H7_TIM4=y
@@ -227,6 +251,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y

boards/cubepilot/cubeorange/nuttx-config/test/defconfig

@@ -7,21 +7,49 @@
 #
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cubepilot/cubeorange/nuttx-config"
@@ -43,8 +71,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=79954
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x1016
@@ -60,7 +88,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
@@ -84,7 +111,10 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -103,9 +133,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -127,17 +154,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -180,7 +206,6 @@ CONFIG_STM32H7_SPI2=y
 CONFIG_STM32H7_SPI4=y
 CONFIG_STM32H7_SPI4_DMA=y
 CONFIG_STM32H7_SPI4_DMA_BUFFER=1024
-CONFIG_STM32H7_SPI_DMA=y
 CONFIG_STM32H7_TIM1=y
 CONFIG_STM32H7_TIM3=y
 CONFIG_STM32H7_TIM4=y
@@ -229,6 +254,4 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
 CONFIG_WATCHDOG=y

boards/cubepilot/cubeyellow/nuttx-config/nsh/defconfig

@@ -8,6 +8,7 @@
 # CONFIG_DEV_CONSOLE is not set
 # CONFIG_DISABLE_ENVIRON is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_FS_PROCFS_EXCLUDE_ENVIRON is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
@@ -15,15 +16,41 @@
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
 # CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
 # CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_EXPORT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
 # CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
 # CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
 # CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
 # CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
 # CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_ARCH="arm"
 CONFIG_ARCH_BOARD_CUSTOM=y
 CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/cubepilot/cubeyellow/nuttx-config"
@@ -45,8 +72,8 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x1012
@@ -55,7 +82,6 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x2DAE
 CONFIG_CDCACM_VENDORSTR="CubePilot"
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
@@ -63,7 +89,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_FAT_DMAMEMORY=y
 CONFIG_FAT_LCNAMES=y
 CONFIG_FAT_LFN=y
@@ -85,8 +110,11 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -104,9 +132,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -128,17 +153,16 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_PREALLOCHOLDERS=32
@@ -183,7 +207,6 @@ CONFIG_STM32F7_SPI2=y
 CONFIG_STM32F7_SPI4=y
 CONFIG_STM32F7_SPI4_DMA=y
 CONFIG_STM32F7_SPI4_DMA_BUFFER=1024
-CONFIG_STM32F7_SPI_DMA=y
 CONFIG_STM32F7_SPI_DMATHRESHOLD=8
 CONFIG_STM32F7_TIM10=y
 CONFIG_STM32F7_TIM11=y
@@ -233,5 +256,3 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"

boards/cubepilot/io-v2/nuttx-config/nsh/defconfig

@@ -17,18 +17,17 @@ CONFIG_ARCH_CHIP_STM32F100C8=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARD_LOOPSPERMSEC=2000
-CONFIG_C99_BOOL8=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
 CONFIG_DISABLE_MOUNTPOINT=y
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_PTHREAD=y
 CONFIG_FDCLONE_DISABLE=y
 CONFIG_FDCLONE_STDIO=y
 CONFIG_HAVE_CXX=y
 CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_IDLETHREAD_STACKSIZE=316
+CONFIG_INIT_ENTRYPOINT="user_start"
+CONFIG_INIT_STACKSIZE=1100
 CONFIG_MM_FILL_ALLOCATIONS=y
 CONFIG_MM_SMALL=y
 CONFIG_NAME_MAX=12
@@ -36,7 +35,6 @@ CONFIG_PREALLOC_TIMERS=0
 CONFIG_RAM_SIZE=8192
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_STACK_COLORATION=y
 CONFIG_START_DAY=30
@@ -61,5 +59,3 @@ CONFIG_USART3_RXBUFSIZE=64
 CONFIG_USART3_RXDMA=y
 CONFIG_USART3_TXBUFSIZE=64
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=1100
-CONFIG_USER_ENTRYPOINT="user_start"

boards/diatone/mamba-f405-mk2/nuttx-config/nsh/defconfig

@@ -23,10 +23,12 @@ CONFIG_ARCH_INTERRUPTSTACK=512
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_CUSTOM_LEDS=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
@@ -109,12 +111,13 @@ CONFIG_RAM_SIZE=196608
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -188,5 +191,5 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/diatone/mamba-f405-mk2/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"
 

boards/emlid/navio2/adc/adc.cpp

@@ -74,7 +74,7 @@ uint32_t px4_arch_adc_sample(uint32_t base_address, unsigned channel)
 		// ADC_SYSFS_PATH
 		char channel_path[strlen(ADC_SYSFS_PATH) + 5] {};
 
-		if (sprintf(channel_path, "%s/ch%d", ADC_SYSFS_PATH, channel) == -1) {
+		if (snprintf(channel_path, sizeof(channel_path), "%s/ch%d", ADC_SYSFS_PATH, channel) == -1) {
 			PX4_ERR("adc channel: %d\n", channel);
 			return UINT32_MAX; // error
 		}

boards/emlid/navio2/default.px4board

@@ -85,6 +85,4 @@ CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
 CONFIG_EXAMPLES_HELLO=y
 CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
 CONFIG_EXAMPLES_PX4_SIMPLE_APP=y
-CONFIG_EXAMPLES_ROVER_STEERING_CONTROL=y
-CONFIG_EXAMPLES_UUV_EXAMPLE_APP=y
 CONFIG_EXAMPLES_WORK_ITEM=y

boards/flywoo/gn-f405/default.px4board

@@ -9,19 +9,14 @@ CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=n
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
-CONFIG_DRIVERS_MAGNETOMETER_QMC5883=y
-CONFIG_DRIVERS_OSD=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_RC_INPUT=y
-CONFIG_DRIVERS_TELEMETRY_FRSKY_TELEMETRY=n
-CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
-CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LOAD_MON=y
@@ -33,14 +28,12 @@ CONFIG_MODULES_MC_RATE_CONTROL=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
-CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
 CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_PARAM=y
-CONFIG_SYSTEMCMDS_I2CDETECT=y
-CONFIG_SYSTEMCMDS_PWM=y
-CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_VER=y

boards/flywoo/gn-f405/nuttx-config/nsh/defconfig

@@ -6,9 +6,48 @@
 # modifications.
 #
 # CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_MMCSD_HAVE_CARDDETECT is not set
 # CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
 # CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_DATE is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 # CONFIG_SPI_CALLBACK is not set
 # CONFIG_STM32_CCMEXCLUDE is not set
 CONFIG_ARCH="arm"
@@ -20,15 +59,17 @@ CONFIG_ARCH_CHIP="stm32"
 CONFIG_ARCH_CHIP_STM32=y
 CONFIG_ARCH_CHIP_STM32F405RG=y
 CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARCH_STACKDUMP=y
 CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BOARD_CRASHDUMP=y
 CONFIG_BOARD_CUSTOM_LEDS=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x0001
@@ -37,11 +78,14 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=2000
 CONFIG_CDCACM_VENDORID=0x26ac
 CONFIG_CDCACM_VENDORSTR="Flywoo"
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
-CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_EXAMPLES_CALIB_UDELAY=y
 CONFIG_FAT_DMAMEMORY=y
 CONFIG_FAT_LCNAMES=y
 CONFIG_FAT_LFN=y
@@ -52,6 +96,7 @@ CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
 CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
 CONFIG_GRAN=y
@@ -61,37 +106,27 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
-CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2944
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MMCSD=y
 CONFIG_MM_REGIONS=2
+CONFIG_NAME_MAX=40
 CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_BASENAME=y
-CONFIG_NSH_DISABLE_DD=y
-CONFIG_NSH_DISABLE_DIRNAME=y
-CONFIG_NSH_DISABLE_HEXDUMP=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_LOSETUP=y
-CONFIG_NSH_DISABLE_MKFIFO=y
-CONFIG_NSH_DISABLE_MKRD=y
-CONFIG_NSH_DISABLE_PUT=y
-CONFIG_NSH_DISABLE_REBOOT=y
-CONFIG_NSH_DISABLE_TELNETD=y
-CONFIG_NSH_DISABLE_UNAME=y
-CONFIG_NSH_DISABLE_WGET=y
-CONFIG_NSH_DISABLE_XD=y
 CONFIG_NSH_FATDEVNO=0
-CONFIG_NSH_FILEIOSIZE=512
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_MMCSDSPIPORTNO=2
 CONFIG_NSH_NESTDEPTH=8
-CONFIG_NSH_READLINE=y
+CONFIG_NSH_QUOTE=y
 CONFIG_NSH_ROMFSETC=y
 CONFIG_NSH_ROMFSSECTSIZE=128
 CONFIG_NSH_STRERROR=y
@@ -99,23 +134,24 @@ CONFIG_NSH_VARS=y
 CONFIG_PIPES=y
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
 CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_RAM_SIZE=196608
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
-CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
 CONFIG_SERIAL_TERMIOS=y
 CONFIG_SIG_DEFAULT=y
 CONFIG_SIG_SIGALRM_ACTION=y
@@ -156,7 +192,6 @@ CONFIG_STM32_SPI1_DMA_BUFFER=1024
 CONFIG_STM32_SPI2=y
 CONFIG_STM32_SPI2_DMA=y
 CONFIG_STM32_SPI3=y
-CONFIG_STM32_SPI_DMA=y
 CONFIG_STM32_SPI_DMATHRESHOLD=8
 CONFIG_STM32_TIM1=y
 CONFIG_STM32_TIM5=y
@@ -183,5 +218,3 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2944
-CONFIG_USER_ENTRYPOINT="nsh_main"

boards/flywoo/gn-f405/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"
 

boards/freefly/can-rtk-gps/nuttx-config/canbootloader/defconfig

@@ -24,6 +24,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -39,7 +58,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -64,4 +83,4 @@ CONFIG_STM32F7_PROGMEM=y
 CONFIG_STM32F7_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096

boards/freefly/can-rtk-gps/nuttx-config/nsh/defconfig

@@ -38,8 +38,8 @@ CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_LOOPSPERMSEC=22114
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
-CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
 CONFIG_CDCACM_PRODUCTID=0x0016
@@ -48,11 +48,29 @@ CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000
 CONFIG_CDCACM_VENDORID=0x26ac
 CONFIG_CDCACM_VENDORSTR="Freefly"
-CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -72,8 +90,11 @@ CONFIG_HAVE_CXXINITIALIZE=y
 CONFIG_I2C=y
 CONFIG_I2C_RESET=y
 CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_INIT_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=2624
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_LIBC_STRERROR=y
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
@@ -88,9 +109,6 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
-CONFIG_NSH_DISABLE_IFCONFIG=y
-CONFIG_NSH_DISABLE_IFUPDOWN=y
-CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
@@ -112,12 +130,12 @@ CONFIG_RAW_BINARY=y
 CONFIG_READLINE_CMD_HISTORY=y
 CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -170,5 +188,3 @@ CONFIG_USBDEV=y
 CONFIG_USBDEV_BUSPOWERED=y
 CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=2624
-CONFIG_USER_ENTRYPOINT="nsh_main"

boards/freefly/can-rtk-gps/src/can.c

@@ -48,7 +48,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "chip.h"
 #include "stm32_can.h"

boards/freefly/can-rtk-gps/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <chip.h>
 #include <stm32_gpio.h>
 #include <stm32_otg.h>

boards/holybro/can-gps-v1/nuttx-config/canbootloader/defconfig

@@ -23,6 +23,25 @@ CONFIG_CLOCK_MONOTONIC=y
 CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DISABLE_MOUNTPOINT=y
 CONFIG_DISABLE_MQUEUE=y
 CONFIG_DISABLE_PTHREAD=y
@@ -35,7 +54,7 @@ CONFIG_IDLETHREAD_STACKSIZE=4096
 CONFIG_LIBC_FLOATINGPOINT=y
 CONFIG_LIBC_LONG_LONG=y
 CONFIG_LIBC_STRERROR=y
-CONFIG_LIB_BOARDCTL=y
+CONFIG_BOARDCTL=y
 CONFIG_FS_PROCFS_MAX_TASKS=0
 CONFIG_MM_REGIONS=2
 CONFIG_NAME_MAX=0
@@ -58,4 +77,4 @@ CONFIG_STM32_NOEXT_VECTORS=y
 CONFIG_STM32_TIM8=y
 CONFIG_TASK_NAME_SIZE=0
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
+CONFIG_INIT_STACKSIZE=4096

boards/holybro/can-gps-v1/nuttx-config/nsh/defconfig

@@ -7,6 +7,7 @@
 #
 # CONFIG_DISABLE_OS_API is not set
 # CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_DISABLE_PTHREAD is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
 # CONFIG_NSH_DISABLE_DF is not set
@@ -33,8 +34,10 @@ CONFIG_ARMV7M_MEMCPY=y
 CONFIG_ARMV7M_USEBASEPRI=y
 CONFIG_ARM_MPU_EARLY_RESET=y
 CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARDCTL=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BOARD_ASSERT_RESET_VALUE=0
 CONFIG_BUILTIN=y
 CONFIG_C99_BOOL8=y
 CONFIG_CLOCK_MONOTONIC=y
@@ -42,6 +45,25 @@ CONFIG_DEBUG_FULLOPT=y
 CONFIG_DEBUG_HARDFAULT_ALERT=y
 CONFIG_DEBUG_SYMBOLS=y
 CONFIG_DEFAULT_SMALL=y
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_ENV is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MODCMDS is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MV is not set
+# CONFIG_NSH_DISABLE_PRINTF is not set
+# CONFIG_NSH_DISABLE_PSSTACKUSAGE
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_SOURCE is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
@@ -98,12 +120,13 @@ CONFIG_RAM_SIZE=262144
 CONFIG_RAM_START=0x20000000
 CONFIG_RAW_BINARY=y
 CONFIG_RTC_DATETIME=y
-CONFIG_SCHED_ATEXIT=y
+CONFIG_LIBC_MAX_EXITFUNS=1
 CONFIG_SCHED_HPWORK=y
 CONFIG_SCHED_HPWORKPRIORITY=249
 CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_INSTRUMENTATION_SWITCH=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
@@ -158,5 +181,5 @@ CONFIG_USART2_RXDMA=y
 CONFIG_USART2_SERIAL_CONSOLE=y
 CONFIG_USART2_TXBUFSIZE=2500
 CONFIG_USEC_PER_TICK=1000
-CONFIG_USERMAIN_STACKSIZE=4096
-CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_INIT_STACKSIZE=4096
+CONFIG_INIT_ENTRYPOINT="nsh_main"

boards/holybro/can-gps-v1/src/can.c

@@ -50,7 +50,7 @@
 #include <arch/board/board.h>
 
 #include "chip.h"
-#include "arm_arch.h"
+#include "arm_internal.h"
 
 #include "stm32.h"
 #include "stm32_can.h"

boards/holybro/can-gps-v1/src/usb.c

@@ -51,7 +51,7 @@
 #include <nuttx/usb/usbdev.h>
 #include <nuttx/usb/usbdev_trace.h>
 
-#include <arm_arch.h>
+#include <arm_internal.h>
 #include <stm32.h>
 #include "board_config.h"