Matthias Grob
7f0ec2305c
px4iofirmware: refactor to only have one PWM output code path
...
This removes the duplication with unexpected differences
and allows to consistently handle the output instead of
overriding the output for some specific cases which
leads to unexpected corner cases. E.g. disabled outputs
suddenly outputing PWM in lockdown.
2024-04-02 11:59:56 -04:00
Silvan Fuhrer
cf87cd27f5
logger: reduce interval of rtl_status logging
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-02 09:49:35 -04:00
Silvan Fuhrer
67fb70a65e
logger: make logging of rtl_status not optional
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-04-02 09:49:35 -04:00
Peter van der Perk
791d7894c8
modules: zenoh: remove broken serial config and update topics
2024-04-01 22:05:20 -04:00
Peter van der Perk
f082de5db7
kconfig: Add dependencies
2024-04-01 22:05:20 -04:00
Matthias Grob
416b6a35a4
failsafe framework: inform about failsafe action
2024-03-27 20:22:04 +01:00
Claudio Micheli
0f9531a526
commander: improve failsafe messaging
...
Signed-off-by: Claudio Micheli <claudio@auterion.com>
2024-03-27 20:22:04 +01:00
Julian Oes
868a884131
fw_att_control: bitwise and should be logical and ( #22933 )
...
Signed-off-by: Julian Oes <julian@oes.ch>
2024-03-27 16:29:56 +13:00
murata,katsutoshi
749f88b62b
ekf2: gps control lazily check yaw_failure() only after in_air
2024-03-26 19:50:57 -04:00
enesavcu
fa1885af23
Signal generator ( #22666 )
...
Add option to generate sine chirp signals for fixed-wing system identification
2024-03-26 16:11:32 +01:00
Matthias Grob
1096384a38
px4iofirmware: don't switch to disarmed or failsafe value on disabled PWM outputs
...
If the output is set to 0 then the FMU had this channel disabled/no function mapped
to it. In that case we do not want to suddenly start outputing failsafe or disarmed
signals.
2024-03-25 19:21:54 +01:00
Eric Katzfey
4a553938fb
VOXL2: HRT updates for synchronization with Qurt time ( #22881 )
...
- Added offset to Posix hrt time to account for synchronization with Qurt hrt time
- Added new Kconfig to configure synchronization of HRT timestamps on VOXL2
- Moved voxl2 libfc sensor library submodule from muorb module to boards directory
- Added check to make sure hrt_elapsed_time can never be negative
2024-03-22 15:24:51 -04:00
Øyvind Taksdal Stubhaug
710286da72
uavcan: publish new can interface status as uorb topic ( #22873 )
2024-03-20 12:38:47 -04:00
bresch
62b8db153b
mpc: fix PositionControl unit test
...
The unit test assumes the position controller is in "decoupled" mode
2024-03-20 14:16:12 +01:00
bresch
638e17d551
ekf: update change indicator
2024-03-20 14:13:49 +01:00
bresch
6d819343aa
ekf2: fix direct state measurement update for suboptimal K case
...
The duration of a unit test had to be increased because the incorrect
covariance matrix update, was making the unit test passing faster
(over-optimistic variance).
2024-03-20 14:13:49 +01:00
bresch
cb2bb2e098
ekf2: add no gyro bias estimate test case
...
This makes the ekf unstable and creates NANs during initialization
2024-03-20 14:13:49 +01:00
bresch
c9221b91ad
ekf2: fix gnss yaw unit test
2024-03-20 14:04:19 +01:00
Drone-Lab
37caddedbb
navigator: update mission after changing home position ( #22834 )
2024-03-20 08:37:19 +01:00
Hamish Willee
95627ea098
SMART_BATTERY_INFO to BATTERY_INFO ( #22875 )
...
* Update submodule mavlink to latest Wed Mar 13 01:02:16 UTC 2024
- mavlink in PX4/Firmware (497327e916103ef05ff8f08f47d33b9a19bc28d7): c4a5c49737
- mavlink current upstream: a3558d6b33
- Changes: c4a5c49737...a3558d6b33
a3558d6b 2024-03-07 Hamish Willee - common - DO_FENCE_ENABLE/PARACHUTE fix (#2090 )
b9730e0f 2024-03-06 olliw42 - update RADIO_RC_CHANNELS to latest, remove all mlrs from storm32.xml (#1919 )
7fed0268 2024-03-06 Patrick José Pereira - common: MAV_CMD_DO_SET_SYS_CMP_ID: Add first version (#2082 )
2909b481 2024-03-06 Hamish Willee - Update Pymavlink (#2089 )
e9b532a9 2024-03-05 Randy Mackay - common: add set-camera-source command (#2079 )
bcdbeb7f 2024-03-01 auturgy - Allow individual fences to be enabled and disabled (#2085 )
2f8403d1 2024-02-29 Hamish Willee - MAV_CMD_ODID_SET_EMERGENCY - (#2086 )
daa59c02 2024-02-22 Peter Barker - common.xml: add a command to deal with safety switch (#2081 )
977332e2 2024-02-14 Hamish Willee - COMPONENT_INFORMATION_BASIC - add manufacturer date (#2078 )
4fef7de2 2024-02-07 Randy Mackay - Common: rename SMART_BATTERY_INFO to BATTERY_INFO and add SOH (#2070 )
3865b311 2024-02-01 Hamish Willee - FLIGHT_INFORMATION - description to match PX4 (#2067 )
f80e6818 2024-01-31 KonradRudin - development.xml: merge both MAV_CMD enums together (#2074 )
* SMART_BATTERY_INFO to BATTERY_INFO on new mavlink module
* Update src/modules/mavlink/streams/BATTERY_INFO.hpp
* fix trivial whitespace
---------
Co-authored-by: PX4 BuildBot <bot@px4.io>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2024-03-20 11:33:37 +13:00
bresch
2e6dd243af
mpc: add possibility to generate tilt using full 3D accel
...
Using full 3D acceleration provides better horizontal acceleration
tracking but also creates a sometimes unwanted behavior because the tilt
is directly coupled with the vertical acceleration setpoint.
2024-03-19 12:29:34 -04:00
muramura
32aa3263a6
EKF: Change a typo
2024-03-18 10:29:44 +01:00
Beat Küng
70346a5b2f
failsafe: set cause to generic when fallback mode is activated
...
Previously when triggering low battery RTL and then losing GPS, the fallback
to Descend would still have low battery as cause.
2024-03-15 14:06:58 +01:00
Silvan Fuhrer
da39d075ac
Commander enums: shorten failsafe event messages
...
Such that the focus is on the important keywords.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-15 10:25:18 +01:00
Silvan Fuhrer
6e15dd5328
Commander: trigger warning when arming denied due to check failure
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-15 09:34:11 +01:00
Silvan Fuhrer
d330d47495
EstimatorCheck: GNSS data fusion stopped as INFO if local position is already invalid
...
Helps to reduce spamming of less important warnings.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-15 09:33:56 +01:00
Silvan Fuhrer
6d8273483c
Commander: set vehicle_status.failsafe flag only if action for failed check is more than warning
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-15 09:33:41 +01:00
bresch
7c6ecd95a8
mc_wind_estimator_tuning: optionally use GNSS velocity
...
Sometimes GNSS is logged but not used
2024-03-14 21:06:24 +01:00
bresch
b2f1122372
ekf2: remove old yaw 321 and 312 derivations
2024-03-14 11:33:45 -04:00
bresch
ee63f3e664
update change indicator
2024-03-14 11:33:45 -04:00
bresch
e3f67d5c1a
ekf2: new yaw derivation
...
Instead of euler angles, compute measurement jacobian using a small
global perturbation around the vertical axis
2024-03-14 11:33:45 -04:00
Silvan Fuhrer
6373d8d243
commander: low flight time failsafe: set UserTakeoverAllowed::Auto to enter Hold first ( #22887 )
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-14 16:30:06 +01:00
Eric Katzfey
ae947513d7
add load_mon support for Qurt platform ( #22883 )
...
- Added check in commander to see if CPU load monitoring has been disabled before signalling overload
2024-03-13 21:33:58 -04:00
Daniel Agar
a1cce7e961
uxrce_dds_client: optimizations and instrumentation
...
- skip ping session if data flowing bidirectionally
- add perf counters for loop time and interval
- skip blocking poll if there's input data to read
2024-03-12 16:22:26 -04:00
Daniel Agar
b115d3cd44
uxrce_dds_client: refactor init to retry indefinitely
...
- move init from UxrceddsClient to init() method so that retry is
possible for both serial and UDP init
2024-03-12 16:22:26 -04:00
Silvan Fuhrer
9f4ae0a85d
vtol: only publish generic warning through mavlink to safe flash ( #22870 )
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-12 13:27:13 +01:00
Silvan Fuhrer
00cc68baa1
Commander: make low remaining flight time configurable and fix clearing condition ( #22863 )
...
* Commander: make low remaining flight time configurable and do not clear
- add _ACT param to disable/warning/RTL this feature
- publish rtl flight time estimate also in RTL, and thus fix re-validation
- make failure message clearer, distinguish from battery low
* battery check: add hysteresis for declaring battery_low_remaining_time false again
---------
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: KonradRudin <98741601+KonradRudin@users.noreply.github.com>
2024-03-12 12:56:01 +01:00
Silvan Fuhrer
7fe5ee64fe
rtl_direct: fix on_inactive()
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-12 11:27:49 +01:00
Silvan Fuhrer
7f370ac6df
Tiltrotor: disable MC yaw fade out during front transition blending
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-12 11:26:07 +01:00
Thomas Stauber
1ad83a8002
mavlink: OPEN_DRONE_ID_SYSTEM stream publish operator altitude in geodetic frame ( #22866 )
2024-03-11 19:49:11 -04:00
Konrad
c5fde63440
mission: The mission check on activation should only be performed for a mission, not RTL.
...
We need to make sure that when the RTL is triggered, it should not reevaluate it, as when it was valid but evaluated to false on activation, it can't do a RTL.
2024-03-11 17:08:56 +01:00
Silvan Fuhrer
cb8520427c
rtl direct: fix setting of previous altitude (abs vs rel)
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-11 14:04:02 +01:00
Silvan Fuhrer
86c074378f
rtl_direct_mission_land: fix abs/rel usage of item.altitude
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-03-11 14:04:02 +01:00
Konrad
e9fda548fa
rtl_direct: Rtl estimate only needs valid destination, not home position
2024-03-11 14:04:02 +01:00
Konrad
91d1342f20
rtl_direct_mission: rtl_estimate for fixedwing land is diagonal
2024-03-11 14:04:02 +01:00
Konrad
89844625b4
rtl: reduce time estimate calculations
2024-03-11 14:04:02 +01:00
Konrad
fde71cd15e
rtl_direct_mission_land: add time estimation for RTL mission land
2024-03-11 14:04:02 +01:00
Konrad
14e4169473
rtl_direct: Move the time estimation calculation into a separate helper class
2024-03-11 14:04:02 +01:00
KonradRudin
8dcfcf5b9e
mission_base: land_start_item invalid only when negative. ( #22856 )
...
rtl: land_start_item invalid only when negative.
Update src/modules/navigator/rtl.cpp
2024-03-11 09:46:16 +01:00
Eric Katzfey
57df7e35b2
uORB: make queue size (ORB_QUEUE_LENGTH) completely static ( #22815 )
...
Previously uORB queue size was an awkward mix of runtime configurable (at advertise or IOCTL before allocate), but effectively static with all queue size settings (outside of test code) actually coming from the topic declaration (presently ORB_QUEUE_LENGTH in the .msg). This change finally resolves the inconsistency making the queue size fully static.
Additionally there were some corner cases that the muorb and orb communicator implementation were not correctly handling. This PR provides fixes for those issues. Also correctly sets remote queue lengths now based on the topic definitions.
* Made setting of uORB topic queue size in based on topic definition only
* Fixes to the ModalAI muorb implementation
* Removed libfc sensor from format checks
* msg/TransponderReport.msg ORB_QUEUE_LENGTH 8->16 (was set to higher in AdsbConflict.h
---------
Co-authored-by: Eric Katzfey <eric.katzfey@modalai.com>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2024-03-08 16:28:24 -05:00