Commit Graph

1236 Commits

Author SHA1 Message Date
Julian Oes b3a5072de5 commander/manual_control: use msg enum for params
Instead of using a private enum class we should define the enum in the
vehicle_command message and then use it consistently.
2021-11-09 16:05:25 +01:00
Julian Oes 6a6b8d49fc msg: re-use manual_control_input in setpoint
This way we avoid duplication between manual_control_input and
manual_control_setpoint.
2021-11-09 16:05:25 +01:00
Julian Oes baf81abbab msg: whitespace only 2021-11-09 16:05:25 +01:00
Julian Oes bd0c1014d9 manual_control: support arming button
The arming button required some refactoring in order to support to
toggle arm/disarm using the vehicle_command. Otherwise manual_control
would have to subscribe to the arming topic and we would spread out the
logic again, and risk race conditions.
2021-11-09 16:05:25 +01:00
Julian Oes e49b596edc commander: add desired main state
This is an intermediate solution to carry forward the initial state of
the mode slot. Basically, it allows that we start up in Stabilized but
switch to POSCTL as soon we have the required GPS.
2021-11-09 16:05:25 +01:00
Julian Oes cda6524421 manual_control: move override detection
This also removes the option to ignore throttle for the override
detection as it's not really required anymore.
2021-11-09 16:05:25 +01:00
Julian Oes 723db8bf2a manual_control: add selector class [WIP]
This adds a selector class with unit tests.
The idea is to have a valid flag in manual_control_septoint and set that
according to the selection and/or timeout of manual_control_inputs.
2021-11-09 16:05:25 +01:00
Daniel Agar 2d816e0b3e [WIP] manual_control selector hacks 2021-11-09 16:05:25 +01:00
Daniel Agar e18cf3da3e sensors/vehicle_imu: use WelfordMean for online mean and variance 2021-11-09 15:19:35 +01:00
JaeyoungLim cda7c6ceaa Enable offboard actuator setpoints 2021-11-07 15:38:42 -05:00
Daniel Agar 68026eadeb save significant IMU bias changes learned by the EKF
* ekf2: make publishing of learned accel biases more robust
* ekf2: reset accel bias if calibration updated
* msg: add separate accel and gyro calibration counters
* ekf2: use separate accel and gyro calibration counters
* ekf2: rework logic to reset biases when calibration counters increment
* sensors: add saving of learned accel biases
* ekf2: generalized saving accel/gyro/mag in flight sensor calibration
* boards: holybro kakutef7 disable systemcmds/perf and systemcmds/top to save flash

Co-authored-by: Paul Riseborough <gncsolns@gmail.com>
2021-11-07 15:34:27 -05:00
bresch 1e94512719 FD: use flags union instead of bitmask 2021-11-05 09:45:52 -04:00
bresch 3f1025fb1e FD: add dedicated topic to log more internal states
log imbalanced propeller check metric

add failure_detector_status message
2021-11-05 09:45:52 -04:00
bresch 5dfb8e594a FD: add imbalanced propeller check 2021-11-05 09:45:52 -04:00
bresch bf2fb70d67 vehicleIMU: compute and log accel variance 2021-11-05 09:45:52 -04:00
Silvan Fuhrer f02786d112 Navigator/Commander: make GPS failsafe consitent: switch to Descend also for FW and VTOL
- remove GPS failsafe mode
- for VTOL: transition to hover in Descend (unless NAV_FORCE_VT is not set)

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-11-05 12:09:39 +03:00
Silvan Fuhrer cad7851774 AirspeedSelector: add _CAS_scale_validated to airspeed_wind for logging
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-22 17:00:35 +02:00
Silvan Fuhrer 625f556b0e AirspeedSelector: airspeed scale estimation improvements and robustification
- run airspeed scale estimation always, not in dedicated mode
- add option to apply scale automatically, with extra feasibility check
- add airspeed scale for all 3 possible airspeed instances
- clean up parameters
- add check for data stuck (non-changing airspeed data)

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2021-10-22 17:00:35 +02:00
Beat Küng 8a2b310b83 topic_listener: avoid code generation, use existing metadata at runtime
This reduces flash size for v5 by ~110KB, the topic listener now only adds
about 1.2KB.
2021-10-20 08:10:05 +02:00
Beat Küng 4c73ac3805 uorb: use single byte for internal types in o_fields metadata
Reduces flash usage by ~9KB.
2021-10-20 08:10:05 +02:00
mcsauder 21163d859e Whitespace cleanup. 2021-10-19 13:29:26 -04:00
Beat Küng a65533b469 mixer_module: add output functions for servos, landing gear, parachute, RC passthrough & gimbal 2021-10-18 18:45:19 -04:00
Beat Küng 5103f00de3 vehicle_command.msg: add VEHICLE_CMD_DO_SET_ACTUATOR 2021-10-18 18:45:19 -04:00
Beat Küng 38fa65a47e control_allocator: remove direct mixer, add actuator_{motors,servos} instead 2021-10-18 18:45:19 -04:00
bresch ec178c8745 create new mag_bias_estimator module
Co-authored-by: Daniel Agar <daniel@agar.ca>
2021-10-02 21:25:21 -04:00
bresch 5874b1f87c mc atune: add module to all targets
- adjust flash constrianed targets to fit
2021-10-02 18:12:05 -04:00
bresch 0498ee92d0 mc atune: add multicopter attitude auto-tuner module 2021-10-02 18:12:05 -04:00
bresch d504b49695 mc_rate: compute control energy and publish to status msg 2021-10-02 18:12:05 -04:00
Nicolas Martin b24e5fc0af clean remaining offboard_control_signal_found_once
offboard_control_signal_found_once is not used any more
2021-09-28 09:25:04 -04:00
Daniel Agar 089c962d92 px4io: moving mixing to FMU side
Using mixers on the IO side had a remote benefit of being able to
override all control surfaces with a radio remote on a fixed wing.
This ended up not being used that much and since the original design
10 years ago (2011) we have been able to convince ourselves that the
overall system stability is at a level where this marginal benefit,
which is not present on multicopters, is not worth the hazzle.

Co-authored-by: Beat Küng <beat-kueng@gmx.net>
Co-authored-by: Daniel Agar <daniel@agar.ca>
2021-09-25 19:15:05 -04:00
Igor Mišić 3a148bc777 camera_trigger: remove camera trigger secondary
camera_trigger: publish trigger when capture feedback is not enabled
2021-09-23 09:21:56 +02:00
Hamish Willee f41e5985e8 vehicle_local_position: clarify origin of system 2021-09-22 10:14:23 +02:00
Matthias Grob d1f1e02afb Refactor mode button changes 2021-09-14 09:52:32 +02:00
Claudio Micheli c50daae4a3 rc_update: introduce support for toggle buttons via RC channels
Signed-off-by: Claudio Micheli <claudio@auterion.com>
2021-09-14 09:52:32 +02:00
Claudio Micheli fa4fc5f347 esc_report: change esc_temperature field to allow negative values
Signed-off-by: Claudio Micheli <claudio@auterion.com>
2021-09-11 15:14:49 -04:00
Beat Küng 00d939995b fix micrortps_transport: set poll fd when baudrate is 0 2021-08-22 10:42:13 -04:00
Christian Llanes c0efbe1f9c change PublicationMulti-> Publication as a temporary fix 2021-08-20 19:56:56 +01:00
Christian Llanes 6423ea50e6 add sensor_combined to urtps_bridge_topics.yaml 2021-08-18 23:52:45 +01:00
Hamish Willee 8aecc64a73 generate uorb - support multiline descriptions 2021-08-16 08:29:44 +02:00
Hamish Willee 9c081ed24b ekf2_timestamps.msg - make first line a complete sentence
Fixes the docs.
2021-08-16 08:29:44 +02:00
Hamish Willee 51fa834ac6 generate_msg_docs: generate better page title 2021-08-16 08:29:44 +02:00
Daniel Agar ff39e27e2d sensor calibration: save temperature at calibration time for monitoring 2021-08-15 11:19:24 -04:00
Daniel Agar f2bae02f87 msg: purge unused qshell 2021-08-14 12:54:01 -04:00
TSC21 21953daa3b microRTPS: transport: fix UART configuration 2021-08-12 08:44:53 +02:00
TSC21 4b6646c5f3 microRTPS: transport: normalize configs with mavlink/mavlink-router 2021-08-12 08:44:53 +02:00
TSC21 af8a6117fa microRTPS: agent: add missing 'g' option 2021-08-12 08:44:53 +02:00
TSC21 2a368b4db1 uorb_to_ros_urtps_topics: minor cleanup 2021-08-12 08:44:53 +02:00
TSC21 74557c9071 uorb_to_ros_msgs: minor cleanup 2021-08-12 08:44:53 +02:00
TSC21 8762dce762 microRTPS: transport: small format fix 2021-08-12 08:44:53 +02:00
TSC21 fae1627d92 microRTPS: client: cleanup and make arguments consistent 2021-08-12 08:44:53 +02:00