* estimator gps check fail flag for spoofing
* warn whenever spoofing state changes to true, use default hysteresis to completely stop fusion
* dont introduce more GPS namings, GNSS instead
* flash: exclude mantis for cuav_x7pro
* lib: add FilteredDerivative class
* AirspeedValidator: add first principle check
- filters throttle, pitch and airspeed rate, and triggers
if the airspeed rate is negative even though the vehicle
is pitching down and giving high throttle.
Check has to fail for duration defined by ASPD_FP_T_WINDOW
to trigger an airspeed failure.
* AirspeedValidator: define constants for first principle check
* FilteredDerivative: set initialised to false if sample interval is invalid
* airspeed_selector: improved comment
* increase IAS derivative filter time constant from 4 to 5
* use legacy parameter handling for FW_PSP_OFF
* handle FW_THR_MAX as well
* ROMFS/airframes: exclude some airframes for v6x and v4pro to save flash on them
---------
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Signed-off-by: RomanBapst <bapstroman@gmail.com>
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
* reset position by fusion
* handle local_pos_valid for fixed wing in gnss denied
* [WIP] ekf2: setEkfGlobalOrigin respect current height reference and vertical position aiding
* global origin, also reset vertical pos without gps as ref
* fix wo gnss, that bitcraze ci passes
* revert some changes as requested
* remove duplicate reset messages
* undo unrelated whitespace changes, I'll fix it everywhere in a followup
* [SQUASH] ekf2: add vehicle_command_ack
* resetGlobalPosToExternalObservation consolidate logic
* remove gnss check from local_pos validation check
* reset when 0<accuracy<1, otherwise fuse
* replace gps param with flag
* ekf2: dead reckon time exceeded, respect ZUPT preflight if air data or optical flow expected
* subtract timeout from last inertial dead-reck, change fake pos conditions, save flash
---------
Co-authored-by: Daniel Agar <daniel@agar.ca>
We had a case where someone took off with an experimental
system with 100% RAM usage on the embedded system
without noticing. This lead to problems during flight.
Since we already have a CPU load check it seems natural
to also check the reported RAM usage.
The case where the airframe maintainer wants to enforce a reset to airframe is
not covered anymore with the `param set-default` mechanism. For products based
on PX4 this is still required to ensure proper functionality after a major update.
* usb: Added parameter to enable always starting mavlink on USB.
Refactored cdcacm_init into a module and added a paramter to allow always starting mavlink on
USB, also added a paramter to choose the mode. The current default behavior is to wait and listen
for data on USB and auto-detect the protocol (mavlink, nsh, ublox). This results in the mavlink
stream not starting until something else on the mavlink network sends a packet first. The new
default behavior is to always start mavlink.
Added parameters
MAV_USB_ENABLE -- default 1 (always start mavlink on USB)
MAV_USE_MODE -- default 3 (onboard)
* added 3 retries for opening serial port in mavlink, removed sleep before sercon
* added DRIVERS_CDCACM_AUTOSTART to ark-v6x default.px4board
* added CONFIG_DRIVERS_CDCACM_AUTOSTART=y to default.px4board for boards with CONFIG_CDCACM in their nsh/defconfig
* format
* remove PGA460 from COMMON_DISTANCE_SENSOR to save flash
* remove LIS2MDL from COMMON_MAGNETOMETER to save flash
* disable CONFIG_DRIVERS_CDCACM_AUTOSTART for fmu-v5 protected.px4board
* moved and renamed parameters, removed mode logic in mavlink
* changed parameter names, added mode none
* remove parameters from mavlink
* Added Lawnmower airframe
* Update 5005_gz_lawnmower
Works all right
* Update 5005_gz_lawnmower
RDD_WHL_SPEED has new name: RDD_WHEEL_SPEED
* Update ROMFS/px4fmu_common/init.d-posix/airframes/5005_gz_lawnmower
Co-authored-by: Per Frivik <94360401+PerFrivik@users.noreply.github.com>
* Update ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt
Co-authored-by: Per Frivik <94360401+PerFrivik@users.noreply.github.com>
* Renamed 5005_gz_lawnmower to 4011_gz_lawnmower
also pulled latest GZ models hash
---------
Co-authored-by: Per Frivik <94360401+PerFrivik@users.noreply.github.com>
* publish the global groundtruth from the navsat callback and rearrange the local groundtruth as the altitude reference now has a dependency on the global groundtruth being initialized
---------
Signed-off-by: frederik <frederik.anilmarkus@gmail.com>
Jaeyoung Lim