[BACKPORT 1.15] Sf45 initialization fixes and per-sector publishing (#25399 )

* SF45 fixes to restart the state machine if sensor does not init correctly (#23565) * fixes to restart the state machine if sensor does not init correctly Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * fixes Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * increase fail count Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * remove extra flush, switch from warn to debug, add enum states for sensor bring-up Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * remove dead code, decrease restart fail count metric, break out of loop with consec errors if over the fail count and not init Signed-off-by: dirksavage88 <dirksavage88@gmail.com> --------- Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * remove tel2 default from sf45 (#24602) Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * fix to orientation offsets for scaled yaw, removed unused param Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * Shift vertical orientation above scaling yaw operation, cp angle sign change Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * SENS: RNG: SF45 changed data processing and publication design, moved to a publishing per sector design. other minor improvements * SENS: RNG: SF45: Fixed sf45 parser, added general checks to avoid potential out-of-bound access * SENS: RNG: SF45:Fix startup problems, increase frequency, robust parser, use nonblocking reads * SENS: RNG: SF45: Added timeout to sensor measurements, to compensate the lower loop time of CollisionPrevention --------- Signed-off-by: dirksavage88 <dirksavage88@gmail.com> Co-authored-by: Claudio Chies <61051109+Claudio-Chies@users.noreply.github.com> Co-authored-by: Alexander Lerach <alexander@auterion.com>
[backport] boards: ark fpv fw vtol 1.15 (#24768 )
2026-05-31 14:50:05 +08:00 · 2025-10-13 21:20:55 -08:00 · 2025-07-07 09:26:00 -08:00 · 2025-06-16 18:51:23 -08:00 · 2025-04-15 16:10:07 +12:00 · 2025-02-06 23:41:28 -05:00
1177 changed files with 20290 additions and 33489 deletions
@@ -35,7 +35,6 @@ pipeline {

          def nuttx_builds_archive = [
            target: [
-                     "3dr_ctrl-zero-h7-oem-revg_default",
                     "airmind_mindpx-v2_default",
                     "ark_can-flow_canbootloader",
                     "ark_can-flow_default",
@@ -47,6 +46,8 @@ pipeline {
                     "ark_cannode_default",
                     "ark_fmu-v6x_bootloader",
                     "ark_fmu-v6x_default",
+                     "ark_fpv_bootloader",
+                     "ark_fpv_default",
                     "ark_pi6x_bootloader",
                     "ark_pi6x_default",
                     "atl_mantis-edu_default",
@@ -77,7 +78,6 @@ pipeline {
                     "matek_h743-mini_default",
                     "matek_h743-slim_default",
                     "matek_h743_default",
-                     "micoair_h743_default",
                     "modalai_fc-v1_default",
                     "modalai_fc-v2_default",
                     "mro_ctrl-zero-classic_default",
@@ -15,7 +15,6 @@
 	"extensions": [
 		"chiehyu.vscode-astyle",
 		"dan-c-underwood.arm",
-		"editorconfig.editorconfig",
 		"fredericbonnet.cmake-test-adapter",
 		"github.vscode-pull-request-github",
 		"marus25.cortex-debug",
@@ -1,7 +1,7 @@
 root = true

 [*]
-insert_final_newline = true
+insert_final_newline = false

 [{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
 indent_style = tab
@@ -9,6 +9,6 @@ tab_width = 8
 # Not in the official standard, but supported by many editors
 max_line_length = 120

-[*.yaml, *.yml]
+[*.yaml]
 indent_style = space
 indent_size = 2
@@ -20,14 +20,14 @@ body:
          3. Took off '....'
          4. See error
    validations:
-      required: false
+      required: true

  - type: textarea
    attributes:
      label: Expected behavior
      description: A clear and concise description of what you expected to happen.
    validations:
-      required: false
+      required: true

  - type: textarea
    attributes:
@@ -45,7 +45,7 @@ body:
      placeholder: |
          # PASTE HERE THE LINK TO THE LOG
    validations:
-      required: false
+      required: true

  - type: markdown
    attributes:
@@ -60,14 +60,14 @@ body:
      placeholder: |
          # If you don't know the version, paste the output of `ver all` in the MAVLink Shell of QGC
    validations:
-      required: false
+      required: true

  - type: input
    attributes:
      label: Flight controller
      description: Specify your flight controller model (what type is it, where was it bought from, ...).
    validations:
-      required: false
+      required: true

  - type: dropdown
    attributes:
@@ -1,90 +0,0 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
-name: Build all targets
-
-on:
-  push:
-    branches:
-    - 'main'
-    - 'stable'
-    - 'beta'
-    - 'release/*'
-  pull_request:
-    branches:
-    - '*'
-
-jobs:
-  group_targets:
-    name: Scan for Board Targets
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=1cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
-    outputs:
-      matrix: ${{ steps.set-matrix.outputs.matrix }}
-      timestamp: ${{ steps.set-timestamp.outputs.timestamp }}
-    steps:
-      - uses: actions/checkout@v4
-
-      - name: Install Python Dependencies
-        uses: py-actions/py-dependency-install@v4
-        with:
-          path: "./Tools/setup/requirements.txt"
-
-      - id: set-matrix
-        run: echo "::set-output name=matrix::$(./Tools/generate_board_targets_json.py --group)"
-
-      - id: set-timestamp
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
-
-  setup:
-    name: ${{ matrix.group }}
-    # runs-on: ubuntu-latest
-    runs-on: [runs-on,runner=8cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
-    needs: group_targets
-    strategy:
-      matrix: ${{ fromJson(needs.group_targets.outputs.matrix) }}
-    container:
-      image: ${{ matrix.container }}
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
-
-      - name: ownership workaround
-        run: git config --system --add safe.directory '*'
-
-      - name: ccache setup keys
-        uses: actions/cache@v4
-        with:
-          path: ~/.ccache
-          key: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-          restore-keys: ${{ matrix.group }}-ccache-${{ needs.group_targets.outputs.timestamp }}
-
-      - name: setup ccache
-        run: |
-            mkdir -p ~/.ccache
-            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-            echo "compression = true" >> ~/.ccache/ccache.conf
-            echo "compression_level = 6" >> ~/.ccache/ccache.conf
-            echo "max_size = 120M" >> ~/.ccache/ccache.conf
-            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            ccache -s
-            ccache -z
-
-      - name: build target group
-        run: |
-            ./Tools/ci_build_all_runner.sh ${{matrix.targets}}
-
-      - name: Upload px4 package
-        uses: actions/upload-artifact@v4
-        with:
-          name: px4_${{matrix.group}}_build_artifacts
-          path: |
-            build/**/*.px4
-            build/**/*.bin
-          compression-level: 0
-
-      - name: ccache post-run
-        run: ccache -s
@@ -16,7 +16,6 @@ jobs:
      matrix:
        check: [
          "check_format",
-          "check_newlines",
          "tests",
          "tests_coverage",
          "px4_fmu-v2_default stack_check",
@@ -24,7 +23,6 @@ jobs:
          "shellcheck_all",
          "NO_NINJA_BUILD=1 px4_fmu-v5_default",
          "NO_NINJA_BUILD=1 px4_sitl_default",
-          "px4_sitl_allyes",
          "airframe_metadata",
          "module_documentation",
          "parameters_metadata",
@@ -0,0 +1,58 @@
+name: Compile Linux Targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'stable'
+    - 'beta'
+    - 'release/*'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-armhf:2023-06-26
+    strategy:
+      matrix:
+        config: [
+          beaglebone_blue_default,
+          emlid_navio2_default,
+          px4_raspberrypi_default,
+          scumaker_pilotpi_default,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+    - name: ownership workaround
+      run: git config --system --add safe.directory '*'
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s
@@ -0,0 +1,54 @@
+name: Compile Linux ARM64 Targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'stable'
+    - 'beta'
+    - 'release/*'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-aarch64:2022-08-12
+    strategy:
+      matrix:
+        config: [
+          scumaker_pilotpi_arm64,
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make ${{matrix.config}}
+      run: make ${{matrix.config}}
+    - name: ccache post-run
+      run: ccache -s
@@ -0,0 +1,136 @@
+name: Compile Nuttx Targets
+
+on:
+  push:
+    branches:
+    - 'main'
+    - 'stable'
+    - 'beta'
+    - 'release/*'
+  pull_request:
+    branches:
+    - '*'
+
+jobs:
+  build:
+    runs-on: ubuntu-latest
+    container: px4io/px4-dev-nuttx-focal:2022-08-12
+    strategy:
+      fail-fast: false
+      matrix:
+        config: [
+          airmind_mindpx-v2,
+          ark_can-flow,
+          ark_can-gps,
+          ark_can-rtk-gps,
+          ark_cannode,
+          ark_fmu-v6x,
+          ark_pi6x,
+          ark_septentrio-gps,
+          atl_mantis-edu,
+          av_x-v1,
+          bitcraze_crazyflie,
+          bitcraze_crazyflie21,
+          cuav_can-gps-v1,
+          cuav_nora,
+          cuav_x7pro,
+          cubepilot_cubeorange,
+          cubepilot_cubeorangeplus,
+          cubepilot_cubeyellow,
+          diatone_mamba-f405-mk2,
+          freefly_can-rtk-gps,
+          holybro_can-gps-v1,
+          holybro_durandal-v1,
+          holybro_kakutef7,
+          holybro_kakuteh7,
+          holybro_pix32v5,
+          matek_gnss-m9n-f4,
+          matek_h743,
+          matek_h743-mini,
+          matek_h743-slim,
+          modalai_fc-v1,
+          modalai_fc-v2,
+          mro_ctrl-zero-classic,
+          mro_ctrl-zero-f7,
+          mro_ctrl-zero-f7-oem,
+          mro_ctrl-zero-h7,
+          mro_ctrl-zero-h7-oem,
+          mro_pixracerpro,
+          mro_x21,
+          mro_x21-777,
+          nxp_fmuk66-e,
+          nxp_fmuk66-v3,
+          nxp_mr-canhubk3,
+          nxp_ucans32k146,
+          omnibus_f4sd,
+          px4_fmu-v2,
+          px4_fmu-v3,
+          px4_fmu-v4,
+          px4_fmu-v4pro,
+          px4_fmu-v5,
+          px4_fmu-v5x,
+          px4_fmu-v6c,
+          px4_fmu-v6u,
+          px4_fmu-v6x,
+          px4_fmu-v6xrt,
+          raspberrypi_pico,
+          sky-drones_smartap-airlink,
+          spracing_h7extreme,
+          uvify_core,
+          siyi_n7
+          ]
+    steps:
+    - uses: actions/checkout@v1
+      with:
+        token: ${{secrets.ACCESS_TOKEN}}
+
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: ${{matrix.config}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: ${{matrix.config}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 120M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z
+
+    - name: make all_variants_${{matrix.config}}
+      run: make all_variants_${{matrix.config}}
+      timeout-minutes: 45
+    - name: make ${{matrix.config}} bloaty_compileunits
+      run: make ${{matrix.config}} bloaty_compileunits || true
+    - name: make ${{matrix.config}} bloaty_inlines
+      run: make ${{matrix.config}} bloaty_inlines || true
+    - name: make ${{matrix.config}} bloaty_segments
+      run: make ${{matrix.config}} bloaty_segments || true
+    - name: make ${{matrix.config}} bloaty_symbols
+      run: make ${{matrix.config}} bloaty_symbols || true
+    - name: make ${{matrix.config}} bloaty_templates
+      run: make ${{matrix.config}} bloaty_templates || true
+    - name: make ${{matrix.config}} bloaty_ram
+      run: make ${{matrix.config}} bloaty_ram || true
+    - name: make ${{matrix.config}} bloaty_compare_master
+      run: make ${{matrix.config}} bloaty_compare_master || true
+    - name: ccache post-run
+      run: ccache -s
+
+    - name: Upload px4 package
+      uses: actions/upload-artifact@v2
+      with:
+        name: px4_package_${{matrix.config}}
+        path: |
+          build/**/*.px4
+          build/**/*.bin
@@ -54,3 +54,4 @@ jobs:
        AWS_REGION: 'us-west-1'
        SOURCE_DIR: 'build/${{ matrix.target }}/_metadata/'
        DEST_DIR: 'Firmware/${{ env.version }}/${{ matrix.target }}/'
+
@@ -11,8 +11,6 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
    strategy:
      fail-fast: false
      matrix:
@@ -88,7 +86,7 @@ jobs:
      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
    - name: Upload px4 coredump
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2-preview
      with:
        name: coredump
        path: px4.core
@@ -103,21 +101,21 @@ jobs:

    - name: Upload px4 binary
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2
      with:
        name: binary
        path: build/px4_sitl_default/bin/px4

    - name: Store PX4 log
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2
      with:
        name: px4_log
        path: ~/.ros/log/*/*.ulg

    - name: Store ROS log
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2
      with:
        name: ros_log
        path: ~/.ros/**/rostest-*.log
@@ -11,8 +11,6 @@ on:
 jobs:
  build:
    runs-on: ubuntu-latest
-    env:
-      ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION: true
    strategy:
      fail-fast: false
      matrix:
@@ -83,7 +81,7 @@ jobs:
      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
    - name: Upload px4 coredump
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2-preview
      with:
        name: coredump
        path: px4.core
@@ -98,21 +96,21 @@ jobs:

    - name: Upload px4 binary
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2
      with:
        name: binary
        path: build/px4_sitl_default/bin/px4

    - name: Store PX4 log
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2
      with:
        name: px4_log
        path: ~/.ros/log/*/*.ulg

    - name: Store ROS log
      if: failure()
-      uses: actions/upload-artifact@v4
+      uses: actions/upload-artifact@v2
      with:
        name: ros_log
        path: ~/.ros/**/rostest-*.log
@@ -1,8 +1,3 @@
-# NOTE: this workflow is now running on Dronecode / PX4 AWS account.
-# - If you want to keep the tests running in GitHub Actions you need to uncomment the "runs-on: ubuntu-latest" lines
-#   and comment the "runs-on: [runs-on,runner=..." lines.
-# - If you would like to duplicate this setup try setting up "RunsOn" on your own AWS account try https://runs-on.com
-
 name: SITL Tests

 on:
@@ -15,139 +10,126 @@ on:

 jobs:
  build:
-    name: Testing PX4 ${{ matrix.config.model }}
-    runs-on: [runs-on,runner=16cpu-linux-x64,image=ubuntu22-full-x64,"run-id=${{ github.run_id }}"]
-    container:
-      image: px4io/px4-dev-simulation-focal:2021-09-08
-      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
+    runs-on: ubuntu-latest
    strategy:
      fail-fast: false
      matrix:
        config:
          - {model: "iris",          latitude:  "59.617693", longitude: "-151.145316", altitude:  "48", build_type: "RelWithDebInfo" } # Alaska
+          # - {model: "standard_vtol", latitude: "-38.071235", longitude:  "145.281220", altitude:  "31", build_type: "AddressSanitizer" } # Australia
          - {model: "tailsitter" ,   latitude:  "29.660316", longitude:  "-82.316658", altitude:  "30", build_type: "RelWithDebInfo" } # Florida
          - {model: "standard_vtol", latitude:  "47.397742", longitude:    "8.545594", altitude: "488", build_type: "Coverage" } # Zurich

+    container:
+      image: px4io/px4-dev-simulation-focal:2021-09-08
+      options: --privileged --ulimit core=-1 --security-opt seccomp=unconfined
    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0
+    - uses: actions/checkout@v1
+      with:
+        token: ${{ secrets.ACCESS_TOKEN }}

-      - name: Git Ownership Workaround
-        run: git config --system --add safe.directory '*'
+    - name: Download MAVSDK
+      run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
+    - name: Install MAVSDK
+      run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"

-      - id: set-timestamp
-        name: Set timestamp for cache
-        run: echo "::set-output name=timestamp::$(date +"%Y%m%d%H%M%S")"
+    - name: Prepare ccache timestamp
+      id: ccache_cache_timestamp
+      shell: cmake -P {0}
+      run: |
+        string(TIMESTAMP current_date "%Y-%m-%d-%H;%M;%S" UTC)
+        message("::set-output name=timestamp::${current_date}")
+    - name: ccache cache files
+      uses: actions/cache@v2
+      with:
+        path: ~/.ccache
+        key: sitl_tests-${{matrix.config.build_type}}-ccache-${{steps.ccache_cache_timestamp.outputs.timestamp}}
+        restore-keys: sitl_tests-${{matrix.config.build_type}}-ccache-
+    - name: setup ccache
+      run: |
+          mkdir -p ~/.ccache
+          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
+          echo "compression = true" >> ~/.ccache/ccache.conf
+          echo "compression_level = 6" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
+          echo "hash_dir = false" >> ~/.ccache/ccache.conf
+          ccache -s
+          ccache -z

-      - name: Cache Key Config
-        uses: actions/cache@v4
-        with:
-          path: ~/.ccache
-          key: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
-          restore-keys: sitl-ccache-${{ steps.set-timestamp.outputs.timestamp }}
+    - name: check environment
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: |
+          export
+          ulimit -a
+    - name: Build PX4
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default
+    - name: ccache post-run px4/firmware
+      run: ccache -s
+    - name: Build SITL Gazebo
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: make px4_sitl_default sitl_gazebo-classic
+    - name: ccache post-run sitl_gazebo-classic
+      run: ccache -s
+    - name: Build MAVSDK tests
+      env:
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+        DONT_RUN: 1
+      run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
+    - name: ccache post-run mavsdk_tests
+      run: ccache -s

-      - name: Cache Conf Config
-        run: |
-            mkdir -p ~/.ccache
-            echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
-            echo "compression = true" >> ~/.ccache/ccache.conf
-            echo "compression_level = 6" >> ~/.ccache/ccache.conf
-            echo "max_size = 120M" >> ~/.ccache/ccache.conf
-            echo "hash_dir = false" >> ~/.ccache/ccache.conf
-            ccache -s
-            ccache -z
+    - name: Core dump settings
+      run: |
+          ulimit -c unlimited
+          echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern

-      - name: Build PX4
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default
+    - name: Run SITL tests
+      env:
+        PX4_HOME_LAT: ${{matrix.config.latitude}}
+        PX4_HOME_LON: ${{matrix.config.longitude}}
+        PX4_HOME_ALT: ${{matrix.config.altitude}}
+        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
+      run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 20 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
+      timeout-minutes: 45

-      - name: Cache Post-Run [px4_sitl_default]
-        run: ccache -s
+    - name: Look at core files
+      if: failure()
+      run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
+    - name: Upload px4 coredump
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: coredump
+        path: px4.core

-      - name: Build SITL Gazebo
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: make px4_sitl_default sitl_gazebo-classic
+    - name: Upload px4 binary
+      if: failure()
+      uses: actions/upload-artifact@v2-preview
+      with:
+        name: binary
+        path: build/px4_sitl_default/bin/px4

-      - name: Cache Post-Run [sitl_gazebo-classic]
-        run: ccache -s
-
-      - name: Download MAVSDK
-        run: wget "https://github.com/mavlink/MAVSDK/releases/download/v$(cat test/mavsdk_tests/MAVSDK_VERSION)/libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Install MAVSDK
-        run: dpkg -i "libmavsdk-dev_$(cat test/mavsdk_tests/MAVSDK_VERSION)_ubuntu20.04_amd64.deb"
-
-      - name: Check PX4 Environment Variables
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: |
-            export
-            ulimit -a
-
-      - name: Build PX4 / MAVSDK tests
-        env:
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-          DONT_RUN: 1
-        run: make px4_sitl_default sitl_gazebo-classic mavsdk_tests
-
-      - name: Cache Post-Run [px4_sitl_default sitl_gazebo-classic mavsdk_tests]
-        run: ccache -s
-
-      - name: Core Dump Settings
-        run: |
-            ulimit -c unlimited
-            echo "`pwd`/%e.core" > /proc/sys/kernel/core_pattern
-
-      - name: Run SITL / MAVSDK Tests
-        env:
-          PX4_HOME_LAT: ${{matrix.config.latitude}}
-          PX4_HOME_LON: ${{matrix.config.longitude}}
-          PX4_HOME_ALT: ${{matrix.config.altitude}}
-          PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
-        run: test/mavsdk_tests/mavsdk_test_runner.py --speed-factor 10 --abort-early --model ${{matrix.config.model}} --upload test/mavsdk_tests/configs/sitl.json --verbose
-        timeout-minutes: 45
-
-      - name: Upload failed logs
-        if: failure()
-        uses: actions/upload-artifact@v4
-        with:
-          name: failed-${{matrix.config.model}}-logs.zip
-          path: |
-            logs/**/**/**/*.log
-            logs/**/**/**/*.ulg
-            build/px4_sitl_default/tmp_mavsdk_tests/rootfs/*.ulg
-
-      - name: Look at Core files
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        run: gdb build/px4_sitl_default/bin/px4 px4.core -ex "thread apply all bt" -ex "quit"
-
-      - name: Upload PX4 coredump
-        if: failure() && ${{ hashFiles('px4.core') != '' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: coredump
-          path: px4.core
-
-      - name: Setup & Generate Coverage Report
-        if: contains(matrix.config.build_type, 'Coverage')
-        run: |
-            git config --global credential.helper "" # disable the keychain credential helper
-            git config --global --add credential.helper store # enable the local store credential helper
-            echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
-            git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
-            mkdir -p coverage
-            lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
-
-      - name: Upload Coverage Information to Codecov
-        if: contains(matrix.config.build_type, 'Coverage')
-        uses: codecov/codecov-action@v4
-        with:
-          token: ${{ secrets.CODECOV_TOKEN }}
-          flags: mavsdk
-          file: coverage/lcov.info
+    # Report test coverage
+    - name: Upload coverage
+      if: contains(matrix.config.build_type, 'Coverage')
+      run: |
+          git config --global credential.helper "" # disable the keychain credential helper
+          git config --global --add credential.helper store # enable the local store credential helper
+          echo "https://x-access-token:${{ secrets.ACCESS_TOKEN }}@github.com" >> ~/.git-credentials # add credential
+          git config --global url."https://github.com/".insteadof git@github.com: # credentials add credential
+          mkdir -p coverage
+          lcov --directory build/px4_sitl_default --base-directory build/px4_sitl_default --gcov-tool gcov --capture -o coverage/lcov.info
+    - name: Upload coverage information to Codecov
+      if: contains(matrix.config.build_type, 'Coverage')
+      uses: codecov/codecov-action@v1
+      with:
+        token: ${{ secrets.CODECOV_TOKEN }}
+        flags: mavsdk
+        file: coverage/lcov.info
@@ -71,7 +71,7 @@
 [submodule "src/modules/zenoh/zenoh-pico"]
 	path = src/modules/zenoh/zenoh-pico
 	url = https://github.com/px4/zenoh-pico
-	branch = dev/1.0.0-px4
+	branch = pr-zubf-werror-fix
 [submodule "src/lib/heatshrink/heatshrink"]
 	path = src/lib/heatshrink/heatshrink
 	url = https://github.com/PX4/heatshrink.git
@@ -2,4 +2,4 @@
 	{
 		"name": "PX4 detect"
 	}
-]
+]
@@ -111,11 +111,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: px4_fmu-v6xrt_bootloader
-    3dr_ctrl-zero-h7-oem-revg_default:
-      short: 3dr_ctrl-zero-h7-oem-revg
-      buildType: MinSizeRel
-      settings:
-        CONFIG: 3dr_ctrl-zero-h7-oem-revg_default
    airmind_mindpx-v2_default:
      short: airmind_mindpx-v2
      buildType: MinSizeRel
@@ -156,16 +151,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_can-rtk-gps_canbootloader
-    ark_septentrio-gps_default:
-      short: ark_septentrio-gps_default
+    ark_septentrio_gps_default:
+      short: ark_septentrio_gps_default
      buildType: MinSizeRel
      settings:
-        CONFIG: ark_septentrio-gps_default
-    ark_septentrio-gps_canbootloader:
-      short: ark_septentrio-gps_canbootloader
+        CONFIG: ark_septentrio_gps_default
+    ark_septentrio_gps_canbootloader:
+      short: ark_septentrio_gps_canbootloader
      buildType: MinSizeRel
      settings:
-        CONFIG: ark_septentrio-gps_canbootloader
+        CONFIG: ark_septentrio_gps_canbootloader
    ark_cannode_default:
      short: ark_cannode_default
      buildType: MinSizeRel
@@ -186,6 +181,16 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: ark_fmu-v6x_default
+    ark_fpv_bootloader:
+      short: ark_fpv_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_fpv_bootloader
+    ark_fpv_default:
+      short: ark_fpv_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_fpv_default
    ark_pi6x_bootloader:
      short: ark_pi6x_bootloader
      buildType: MinSizeRel
@@ -286,11 +291,6 @@ CONFIG:
      buildType: MiniSizeRel
      settings:
        CONFIG: matek_gnss-m9n-f4_default
-    micoair_h743_default:
-      short: micoair_h743
-      buildType: MinSizeRel
-      settings:
-        CONFIG: micoair_h743_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -4,7 +4,6 @@
    "recommendations": [
        "chiehyu.vscode-astyle",
        "dan-c-underwood.arm",
-        "editorconfig.editorconfig",
        "fredericbonnet.cmake-test-adapter",
        "github.vscode-pull-request-github",
        "marus25.cortex-debug",
@@ -15,7 +15,6 @@
        "cmake.buildDirectory": "${workspaceFolder}/build/${variant:CONFIG}",
        "cmake.configureOnOpen": true,
        "cmake.ctest.parallelJobs": 1,
-        "cmake.options.statusBarVisibility": "compact",
        "cmake.skipConfigureIfCachePresent": true,
        "cmakeExplorer.buildDir": "${workspaceFolder}/build/px4_sitl_test",
        "cmakeExplorer.parallelJobs": 1,
@@ -113,20 +113,12 @@ include(px4_parse_function_args)
 include(px4_git)

 execute_process(
-	COMMAND git describe --exclude ext/* --tags --match "v[0-9]*"
+	COMMAND git describe --exclude ext/* --always --tags
 	OUTPUT_VARIABLE PX4_GIT_TAG
 	OUTPUT_STRIP_TRAILING_WHITESPACE
-	RESULTS_VARIABLE GIT_DESCRIBE_RESULT
 	WORKING_DIRECTORY ${PX4_SOURCE_DIR}
 	)

-# if proper git tag unavilable default to v0.0.0
-if(NOT ${GIT_DESCRIBE_RESULT} MATCHES "0")
-	set(PX4_GIT_TAG "v0.0.0")
-endif()
-
-message(STATUS "PX4_GIT_TAG: ${PX4_GIT_TAG}")
-
 # git describe to X.Y.Z version
 string(REPLACE "." ";" VERSION_LIST ${PX4_GIT_TAG})

@@ -185,17 +185,6 @@ menu "Serial ports"
        string "EXT2 tty port"
 endmenu

-menu "File paths"
-
-    config BOARD_ROOT_PATH
-        string "PX4 Root file path"
-        default "/fs/microsd"
-
-    config BOARD_PARAM_FILE
-        string "Parameter file"
-        default "/fs/mtd_params"
-endmenu
-
 menu "drivers"
 source "src/drivers/Kconfig"
 endmenu
@@ -324,8 +324,8 @@ px4io_update:
 	git status

 bootloaders_update: \
-	3dr_ctrl-zero-h7-oem-revg_bootloader \
 	ark_fmu-v6x_bootloader \
+	ark_fpv_bootloader \
 	ark_pi6x_bootloader \
 	cuav_nora_bootloader \
 	cuav_x7pro_bootloader \
@@ -340,7 +340,6 @@ bootloaders_update: \
 	matek_h743_bootloader \
 	matek_h743-mini_bootloader \
 	matek_h743-slim_bootloader \
-        micoair_h743_bootloader \
 	modalai_fc-v2_bootloader \
 	mro_ctrl-zero-classic_bootloader \
 	mro_ctrl-zero-h7_bootloader \
@@ -381,9 +380,9 @@ doxygen:
 	@$(PX4_MAKE) -C "$(SRC_DIR)"/build/doxygen
 	@touch "$(SRC_DIR)"/build/doxygen/Documentation/.nojekyll

-# Style
+# Astyle
 # --------------------------------------------------------------------
-.PHONY: check_format format check_newlines
+.PHONY: check_format format

 check_format:
 	$(call colorecho,'Checking formatting with astyle')
@@ -394,10 +393,6 @@ format:
 	$(call colorecho,'Formatting with astyle')
 	@"$(SRC_DIR)"/Tools/astyle/check_code_style_all.sh --fix

-check_newlines:
-	$(call colorecho,'Checking for missing or duplicate newlines at the end of files')
-	@"$(SRC_DIR)"/Tools/astyle/check_newlines.sh
-
 # Testing
 # --------------------------------------------------------------------
 .PHONY: tests tests_coverage tests_mission tests_mission_coverage tests_offboard tests_avoidance
@@ -551,14 +546,14 @@ distclean:
 # All other targets are handled by PX4_MAKE. Add a rule here to avoid printing an error.
 %:
 	$(if $(filter $(FIRST_ARG),$@), \
-		$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) list_config_targets' to get a list of all possible [configuration] targets."),@#)
+		$(error "Make target $@ not found. It either does not exist or $@ cannot be the first argument. Use '$(MAKE) help|list_config_targets' to get a list of all possible [configuration] targets."),@#)

 # Print a list of non-config targets (based on http://stackoverflow.com/a/26339924/1487069)
 help:
 	@echo "Usage: $(MAKE) <target>"
 	@echo "Where <target> is one of:"
 	@$(MAKE) -pRrq -f $(lastword $(MAKEFILE_LIST)) : 2>/dev/null | \
-		awk -v RS= -F: '/(^|\n)# Files(\n|$$)/,/(^|\n)# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
+		awk -v RS= -F: '/^# File/,/^# Finished Make data base/ {if ($$1 !~ "^[#.]") {print $$1}}' | sort | \
 		egrep -v -e '^[^[:alnum:]]' -e '^($(subst $(space),|,$(ALL_CONFIG_TARGETS)))$$' -e '_default$$' -e '^(Makefile)'
 	@echo
 	@echo "Or, $(MAKE) <config_target> [<make_target(s)>]"
@@ -120,7 +120,6 @@ add_custom_command(
 		${romfs_gen_root_dir}/init.d/rc.serial
 		${romfs_gen_root_dir}/init.d/rc.autostart
 		${romfs_gen_root_dir}/init.d/rc.autostart.post
-		${romfs_gen_root_dir}/init.d/rc.filepaths
 		${romfs_copy_stamp}
 	COMMAND ${CMAKE_COMMAND} -E remove_directory ${romfs_gen_root_dir}/*
 	COMMAND ${CMAKE_COMMAND} -E tar xf ${romfs_tar_file}
@@ -132,9 +131,6 @@ add_custom_command(
 		--rc-dir ${romfs_gen_root_dir}/init.d
 		--serial-ports ${board_serial_ports} ${added_arguments}
 		--config-files ${module_config_files} #--verbose
-	COMMAND ${PYTHON_EXECUTABLE} ${PX4_SOURCE_DIR}/Tools/filepaths/generate_config.py
-		--rc-dir ${romfs_gen_root_dir}/init.d
-		--params-file ${CONFIG_BOARD_PARAM_FILE}
 	COMMAND ${CMAKE_COMMAND} -E touch ${romfs_copy_stamp}
 	WORKING_DIRECTORY ${romfs_gen_root_dir}
 	DEPENDS ${romfs_tar_file}
@@ -324,7 +320,6 @@ add_custom_target(romfs_gen_files_target
 	DEPENDS
 		${romfs_copy_stamp}
 		${romfs_gen_root_dir}/init.d/rc.serial
-		${romfs_gen_root_dir}/init.d/rc.filepaths
 		romfs_extras.stamp
 	)

@@ -21,14 +21,25 @@ set R /
 #
 ver all

-# Load param file location from kconfig
-. ${R}etc/init.d/rc.filepaths
+if mft query -q -k MTD -s MTD_PARAMETERS -v /fs/mtd_params
+then
+	set PARAM_FILE /fs/mtd_params
+fi
+
+if mft query -q -k MTD -s MTD_PARAMETERS -v /dev/eeeprom0
+then
+	set PARAM_FILE /dev/eeeprom0
+fi
+
+if mft query -q -k MTD -s MTD_PARAMETERS -v /mnt/qspi/params
+then
+	set PARAM_FILE /mnt/qspi/params
+fi

 #
 # Load parameters.
 #
 param select $PARAM_FILE
-
 if ! param load
 then
 	param reset_all
@@ -29,3 +29,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
@@ -30,3 +30,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104

 param set-default EKF2_RNG_A_HMAX 10
+
@@ -94,3 +94,4 @@ param set-default CA_METHOD 0
 # disable attitude failure detection
 param set-default FD_FAIL_P 0
 param set-default FD_FAIL_R 0
+
@@ -12,3 +12,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
@@ -24,6 +24,8 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027

+param set-default BAT_N_CELLS 3
+
 param set-default SIH_T_MAX 6
 param set-default SIH_MASS 0.3
 param set-default SIH_IXX 0.00402
@@ -33,6 +33,8 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027

+param set-default BAT_N_CELLS 3
+
 param set-default SIH_T_MAX 2
 param set-default SIH_Q_MAX 0.0165
 param set-default SIH_MASS 0.2
@@ -47,5 +47,5 @@ param set-default MPC_ALT_MODE 2

 param set-default SENS_FLOW_ROT 6
 param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 15
+param set-default SENS_FLOW_MAXHGT 3
 param set-default SENS_FLOW_MAXR 2.5
@@ -30,3 +30,4 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104

 param set-default LPE_FUSION 242
+
@@ -18,3 +18,4 @@ param set-default LPE_FUSION 132

 # AEQ: External heading set to use vision input
 param set-default ATT_EXT_HDG_M 1
+
@@ -41,3 +41,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
+
@@ -61,3 +61,4 @@ param set-default PWM_MAIN_FUNC5 105
 param set-default PWM_MAIN_FUNC6 106
 param set-default PWM_MAIN_FUNC7 107
 param set-default PWM_MAIN_FUNC8 108
+
@@ -68,3 +68,5 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
+
@@ -39,6 +39,7 @@ param set-default FW_T_SINK_MIN 2.2

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -41,6 +41,7 @@ param set-default FW_T_SINK_MIN 2.2

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -70,3 +71,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
@@ -24,6 +24,7 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1

 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -55,3 +56,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
@@ -24,6 +24,7 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1

 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -54,3 +54,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
@@ -24,6 +24,7 @@ param set-default FW_RR_P 0.085
 param set-default FW_W_EN 1

 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -55,3 +56,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
@@ -62,3 +62,4 @@ param set-default PWM_MAIN_FUNC7 202
 param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256
+
@@ -39,6 +39,7 @@ param set-default FW_T_SINK_MIN 2.2

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -23,7 +23,9 @@ param set-default FW_RR_P 0.085

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500

 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2
@@ -78,3 +78,4 @@ param set-default VT_FWD_THRUST_EN 4
 param set-default VT_FWD_THRUST_SC 1
 param set-default VT_F_TRANS_THR 0.75
 param set-default VT_TYPE 2
+
@@ -75,3 +75,4 @@ param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_TYPE 0

 param set-default WV_EN 0
+
@@ -88,3 +88,4 @@ param set-default PWM_MAIN_FUNC11 422
 param set-default RC_MAP_AUX1 8
 param set-default RC_MAP_AUX2 9
 param set-default RC_MAP_AUX3 10
+
@@ -39,6 +39,7 @@ param set-default FW_T_SINK_MIN 2.2

 param set-default FW_W_EN 1

+param set-default MIS_LTRMIN_ALT 30
 param set-default MIS_TAKEOFF_ALT 30

 param set-default NAV_ACC_RAD 15
@@ -33,7 +33,7 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 0

-param set-default FD_FAIL_R 70
+parm set-default FD_FAIL_R 70

 param set-default FW_P_TC 0.6

@@ -31,3 +31,4 @@ param set-default PWM_MAIN_FUNC1 201
 param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101
+
@@ -38,3 +38,4 @@ param set-default PWM_MAIN_FUNC1 201
 param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101
+
@@ -41,3 +41,4 @@ param set-default CA_R_REV 3

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
+
@@ -64,3 +64,4 @@ param set-default PWM_MAIN_FUNC4 203
 param set-default PWM_MAIN_FUNC5 407
 param set-default PWM_MAIN_FUNC6 408
 param set-default PWM_MAIN_FUNC7 409
+
@@ -69,3 +69,4 @@ param set-default PWM_MAIN_FUNC4 203
 param set-default PWM_MAIN_FUNC5 407
 param set-default PWM_MAIN_FUNC6 408
 param set-default PWM_MAIN_FUNC7 409
+
@@ -36,3 +36,4 @@ param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 103
+
@@ -52,4 +52,3 @@ param set-default SIM_GZ_EC_MAX3 1000
 param set-default SIM_GZ_EC_MAX4 1000

 param set-default MPC_THR_HOVER 0.60
-param set-default NAV_DLL_ACT 2
@@ -101,9 +101,8 @@ param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

 param set-default NAV_ACC_RAD 5
-param set-default NAV_DLL_ACT 2

 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.3
+param set-default VT_F_TRANS_THR 0.75
 param set-default VT_TYPE 2
 param set-default FD_ESCS_EN 0
@@ -132,5 +132,3 @@ param set-default SIM_GZ_EC_MAX1 1100
 param set-default SIM_GZ_EC_MAX2 1100
 param set-default SIM_GZ_EC_MAX3 1100
 param set-default SIM_GZ_EC_MAX4 1100
-
-param set-default NAV_DLL_ACT 2
@@ -6,40 +6,16 @@
 . ${R}etc/init.d/rc.rover_differential_defaults

 PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=r1_rover}

 param set-default SIM_GZ_EN 1 # Gazebo bridge

-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAN_YAW_SCALE 0.1
-param set-default RD_MAX_ACCEL 6
-param set-default RD_MAX_JERK 30
-param set-default RD_MAX_THR_YAW_R 5
-param set-default RD_YAW_RATE_P 0.1
-param set-default RD_YAW_RATE_I 0
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0
-param set-default RD_MAX_SPEED 5
-param set-default RD_MAX_THR_SPD 7
-param set-default RD_SPEED_P 1
-param set-default RD_SPEED_I 0
-param set-default RD_MAX_YAW_RATE 180
-param set-default RD_MISS_SPD_DEF 5
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
-param set-default PP_LOOKAHD_GAIN 1
-
 # Simulated sensors
 param set-default SENS_EN_GPSSIM 1
 param set-default SENS_EN_BAROSIM 0
 param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
+param set-default SENS_EN_ARSPDSIM 1

 # Actuator mapping
 param set-default SIM_GZ_WH_FUNC1 101 # right wheel
@@ -15,29 +15,14 @@ param set-default SIM_GZ_EN 1 # Gazebo bridge
 param set-default SENS_EN_GPSSIM 1
 param set-default SENS_EN_BAROSIM 0
 param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
+param set-default SENS_EN_ARSPDSIM 1
 # We can arm and drive in manual mode when it slides and GPS check fails:
 param set-default COM_ARM_WO_GPS 1

-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.9
-param set-default RD_MAN_YAW_SCALE 0.1
-param set-default RD_YAW_RATE_I 0.1
-param set-default RD_YAW_RATE_P 5
-param set-default RD_MAX_ACCEL 1
-param set-default RD_MAX_JERK 3
-param set-default RD_MAX_SPEED 8
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0.1
-param set-default RD_MAX_YAW_RATE 30
-param set-default RD_MISS_SPD_DEF 8
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 30
-param set-default PP_LOOKAHD_MIN 2
-param set-default PP_LOOKAHD_GAIN 1
+# Set Differential Drive Kinematics Library parameters:
+param set RDD_WHEEL_BASE 0.9
+param set RDD_WHEEL_RADIUS 0.22
+param set RDD_WHEEL_SPEED 10.0	# Maximum wheel speed rad/s, approx 8 km/h

 # Actuator mapping - set SITL motors/servos output parameters:

@@ -51,14 +36,14 @@ param set-default SIM_GZ_WH_FUNC1 101 # right wheel
 param set-default SIM_GZ_WH_FUNC2 102 # left wheel
 #param set-default SIM_GZ_WH_MIN2 0
 #param set-default SIM_GZ_WH_MAX2 200
-#param set-default SIM_GZ_WH_DIS2 100
+#aram set-default SIM_GZ_WH_DIS2 100
 #param set-default SIM_GZ_WH_FAIL2 100

 param set-default SIM_GZ_WH_REV 0 # no need to reverse any wheels

-# Note: The servo configurations ( SIM_GZ_SV_FUNC*) outlined below are intended for educational purposes in this simulation.
-# They do not have physical effects in the simulated environment, except for actuating the joints. Their definitions are meant to demonstrate
-# how actuators could be mapped and configured in a real-world application, providing a foundation for understanding and implementing actuator
+# Note: The servo configurations ( SIM_GZ_SV_FUNC*) outlined below are intended for educational purposes in this simulation. 
+# They do not have physical effects in the simulated environment, except for actuating the joints. Their definitions are meant to demonstrate 
+# how actuators could be mapped and configured in a real-world application, providing a foundation for understanding and implementing actuator 
 # controls in practical scenarios.

 # Cutter deck blades clutch, PCA9685 servo channel 3,  "RC FLAPS" (406) - leftmost switch, or "Servo 3" (203):
@@ -1,49 +0,0 @@
-#!/bin/sh
-# @name Rover Ackermann
-# @type Rover
-# @class Rover
-
-. ${R}etc/init.d/rc.rover_ackermann_defaults
-
-PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
-PX4_GZ_WORLD=${PX4_GZ_WORLD:=rover}
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=rover_ackermann}
-
-param set-default SIM_GZ_EN 1 # Gazebo bridge
-
-# Rover parameters
-param set-default NAV_ACC_RAD 0.5
-param set-default RA_ACC_RAD_GAIN 2
-param set-default RA_ACC_RAD_MAX 3
-param set-default RA_MAX_ACCEL 1.5
-param set-default RA_MAX_JERK 15
-param set-default RA_MAX_SPEED 3
-param set-default RA_MAX_STR_ANG 0.5236
-param set-default RA_MAX_STR_RATE 360
-param set-default RA_MISS_VEL_DEF 3
-param set-default RA_MISS_VEL_GAIN 5
-param set-default RA_MISS_VEL_MIN 1
-param set-default RA_SPEED_I 0.01
-param set-default RA_SPEED_P 2
-param set-default RA_WHEEL_BASE 0.321
-
-# Pure Pursuit parameters
-param set-default PP_LOOKAHD_GAIN 1
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1
-
-# Simulated sensors
-param set-default SENS_EN_GPSSIM 1
-param set-default SENS_EN_BAROSIM 0
-param set-default SENS_EN_MAGSIM 1
-param set-default SENS_EN_ARSPDSIM 0
-
-# Wheels
-param set-default SIM_GZ_WH_FUNC1 101
-param set-default SIM_GZ_WH_MIN1 0
-param set-default SIM_GZ_WH_MAX1 200
-param set-default SIM_GZ_WH_DIS1 100
-
-# Steering
-param set-default SIM_GZ_SV_FUNC1 201
-param set-default SIM_GZ_SV_REV 1
@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 lidar
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_lidar}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500
@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-# @name Gazebo x500 mono cam
-#
-# @type Quadrotor
-#
-
-PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500_mono_cam_down}
-
-. ${R}etc/init.d-posix/airframes/4001_gz_x500
@@ -63,3 +63,4 @@ param set-default PWM_MAIN_FUNC9 422
 # Landing gear
 param set-default PWM_MAIN_FUNC10 400
 param set-default PWM_MAIN_FUNC11 400
+
@@ -119,3 +119,4 @@ param set-default CA_METHOD 0
 # disable attitude failure detection
 param set-default FD_FAIL_P 0
 param set-default FD_FAIL_R 0
+
@@ -83,9 +83,6 @@ px4_add_romfs_files(
 	4009_gz_r1_rover
 	4010_gz_x500_mono_cam
 	4011_gz_lawnmower
-	4012_gz_rover_ackermann
-	4013_gz_x500_lidar
-	4014_gz_x500_mono_cam_down

 	6011_gazebo-classic_typhoon_h480
 	6011_gazebo-classic_typhoon_h480.post
@@ -15,9 +15,6 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 	if [ -n "${PX4_HOME_LON}" ]; then
 		param set SIH_LOC_LON0 ${PX4_HOME_LON}
 	fi
-	if [ -n "${PX4_HOME_ALT}" ]; then
-		param set SIH_LOC_H0 ${PX4_HOME_ALT}
-	fi

 	if simulator_sih start; then

@@ -157,7 +157,6 @@ param set-default CBRK_SUPPLY_CHK 894281

 # disable check, no CPU load reported on posix yet
 param set-default COM_CPU_MAX -1
-param set-default COM_RAM_MAX -1

 # Don't require RC calibration and configuration
 param set-default COM_RC_IN_MODE 1
@@ -44,7 +44,6 @@ px4_add_romfs_files(
 	# TODO
 	rc.balloon_apps
 	rc.balloon_defaults
-	rc.sysinit
 )

 if(CONFIG_MODULES_AIRSHIP_ATT_CONTROL)
@@ -78,20 +77,13 @@ if(CONFIG_MODULES_ROVER_POS_CONTROL)
 	)
 endif()

-if(CONFIG_MODULES_ROVER_DIFFERENTIAL)
+if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
 	px4_add_romfs_files(
 		rc.rover_differential_apps
 		rc.rover_differential_defaults
 	)
 endif()

-if(CONFIG_MODULES_ROVER_ACKERMANN)
-	px4_add_romfs_files(
-		rc.rover_ackermann_apps
-		rc.rover_ackermann_defaults
-	)
-endif()
-
 if(CONFIG_MODULES_UUV_ATT_CONTROL)
 	px4_add_romfs_files(
 		rc.uuv_apps
@@ -44,3 +44,4 @@ param set-default CA_ROTOR4_KM -0.05
 param set-default CA_ROTOR5_PX 0.25
 param set-default CA_ROTOR5_PY -0.433
 param set-default CA_ROTOR5_PZ 0.05
+
@@ -44,6 +44,8 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027

+param set-default BAT_N_CELLS 3
+
 param set SIH_T_MAX 6
 param set SIH_MASS 0.3
 param set SIH_IXX 0.00402
@@ -43,10 +43,6 @@ param set-default CA_SV_CS1_TRQ_P 0.3
 param set-default CA_SV_CS1_TRQ_Y -0.3
 param set-default CA_SV_CS1_TYPE 6

-param set-default FW_AIRSPD_MAX 12
-param set-default FW_AIRSPD_MIN 7
-param set-default FW_AIRSPD_TRIM 10
-
 param set-default HIL_ACT_FUNC1 101
 param set-default HIL_ACT_FUNC2 102
 param set-default HIL_ACT_FUNC5 202
@@ -66,7 +62,7 @@ param set-default CBRK_SUPPLY_CHK 894281
 # - without safety switch
 param set-default CBRK_IO_SAFETY 22027

-param set-default SENS_DPRES_OFF 0.001
+param set-default BAT_N_CELLS 3

 param set SIH_T_MAX 2.0
 param set SIH_Q_MAX 0.0165
@@ -81,5 +77,3 @@ param set SIH_L_ROLL 0.145

 # sih as tailsitter
 param set SIH_VEHICLE_TYPE 2
-
-param set-default VT_ARSP_TRANS 6
@@ -1,99 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Tailsitter Duo
-#
-# @type Simulation
-# @class VTOL
-#
-# @output Motor1 motor right
-# @output Motor2 motor left
-# @output Servo1 elevon right
-# @output Servo2 elevon left
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-#
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set UAVCAN_ENABLE 0
-param set-default VT_B_TRANS_DUR 5
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 2
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default CA_AIRFRAME 2
-param set-default CA_ROTOR_COUNT 5
-param set-default CA_ROTOR0_KM 0.05
-param set-default CA_ROTOR0_PX 0.2
-param set-default CA_ROTOR0_PY 0.2
-param set-default CA_ROTOR1_KM 0.05
-param set-default CA_ROTOR1_PX -0.2
-param set-default CA_ROTOR1_PY -0.2
-param set-default CA_ROTOR2_PX 0.2
-param set-default CA_ROTOR2_PY -0.2
-param set-default CA_ROTOR2_KM -0.05
-param set-default CA_ROTOR3_PX -0.2
-param set-default CA_ROTOR3_PY 0.2
-param set-default CA_ROTOR3_KM -0.05
-
-
-param set-default CA_ROTOR4_PX -0.3
-param set-default CA_ROTOR4_KM 0.05
-param set-default CA_ROTOR4_AX 1
-param set-default CA_ROTOR4_AZ 0
-
-param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1
-
-param set HIL_ACT_REV 32
-
-param set-default FW_AIRSPD_MAX 12
-param set-default FW_AIRSPD_MIN 7
-param set-default FW_AIRSPD_TRIM 10
-
-param set-default HIL_ACT_FUNC1 101
-param set-default HIL_ACT_FUNC2 102
-param set-default HIL_ACT_FUNC3 103
-param set-default HIL_ACT_FUNC4 104
-param set-default HIL_ACT_FUNC5 201
-param set-default HIL_ACT_FUNC6 202
-param set-default HIL_ACT_FUNC7 203
-param set-default HIL_ACT_FUNC8 105
-
-param set-default MAV_TYPE 22
-
-
-
-# set SYS_HITL to 2 to start the SIH and avoid sensors startup
-param set-default SYS_HITL 2
-
-# disable some checks to allow to fly:
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default SENS_DPRES_OFF 0.001
-
-param set SIH_T_MAX 2.0
-param set SIH_Q_MAX 0.0165
-param set SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set SIH_IXX 0.00354
-param set SIH_IYY 0.000625
-param set SIH_IZZ 0.00300
-param set SIH_IXZ 0
-param set SIH_KDV 0.2
-param set SIH_L_ROLL 0.145
-
-# sih as tailsitter
-param set SIH_VEHICLE_TYPE 3
-
-param set-default VT_ARSP_TRANS 6
@@ -66,6 +66,7 @@ param set-default MC_PITCHRATE_I 0.05
 param set-default MC_YAWRATE_MAX 20
 param set-default MC_AIRMODE 1

+param set-default MIS_DIST_1WP 100
 param set-default MIS_TAKEOFF_ALT 15

 param set-default MPC_XY_P 0.8
@@ -119,3 +119,5 @@ param set-default PWM_MAIN_TIM0 50
 param set-default PWM_MAIN_DIS1 1500
 param set-default PWM_MAIN_DIS2 1500
 param set-default PWM_MAIN_DIS4 1500
+
+
@@ -32,3 +32,4 @@ param set-default CA_SV_TL0_MAXA 45
 param set-default CA_SV_TL0_MINA -45
 param set-default CA_SV_TL0_TD 90
 param set-default CA_SV_TL_COUNT 1
+
@@ -24,3 +24,5 @@ param set-default MC_PITCHRATE_D 0
 param set-default MC_PITCHRATE_FF 0.1

 param set-default CA_AIRFRAME 10
+
+
@@ -23,3 +23,4 @@ param set-default MAV_0_MODE 1
 param set-default MAV_0_CONFIG 102
 param set-default GPS_UBX_DYNMODEL 8
 param set-default SER_TEL2_BAUD 9600
+
@@ -72,3 +72,5 @@ param set-default PWM_MAIN_DIS5 1000
 param set-default PWM_MAIN_DIS6 1500
 param set-default PWM_MAIN_DIS7 1500
 param set-default PWM_MAIN_DIS8 1500
+
+
@@ -66,3 +66,4 @@ param set-default CA_ROTOR11_PX -0.344
 param set-default CA_ROTOR11_PY -0.25
 param set-default CA_ROTOR11_PZ -0.05
 param set-default CA_ROTOR11_KM -0.05
+
@@ -38,3 +38,4 @@ param set-default CA_SV_CS_COUNT 1
 param set-default CA_SV_CS0_TRQ_P 1

 param set-default CA_R_REV 7
+
@@ -6,7 +6,6 @@
 # @class Copter
 #
 # @board px4_fmu-v2 exclude
-# @board px4_fmu-v5x exclude
 # @board bitcraze_crazyflie exclude
 #
 # @maintainer Iain Galloway <iain.galloway@nxp.com>
@@ -7,10 +7,6 @@
 #
 # @maintainer
 # @board px4_fmu-v2 exclude
-# @board cuav_x7pro exclude
-# @board px4_fmu-v4pro exclude
-# @board px4_fmu-v5x exclude
-# @board px4_fmu-v6x exclude
 #

 . ${R}etc/init.d/rc.mc_defaults
@@ -40,6 +36,7 @@ param set-default COM_RC_LOSS_T 3


 # ekf2
+param set-default EKF2_TERR_MASK 1
 param set-default EKF2_BARO_NOISE 2

 param set-default EKF2_BCOEF_X 31.5
@@ -12,7 +12,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
 #
@@ -10,7 +10,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board px4_fmu-v6x exclude
 # @board bitcraze_crazyflie exclude
 # @board cuav_x7pro exclude
 #
@@ -8,7 +8,6 @@
 # @maintainer Oleg Kalachev <okalachev@gmail.com>
 #
 # @board px4_fmu-v2 exclude
-# @board px4_fmu-v4pro exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -25,6 +25,7 @@
 param set-default BAT1_CAPACITY 4000
 param set-default BAT1_N_CELLS 6
 param set-default BAT1_V_EMPTY 3.3
+param set-default BAT1_V_LOAD_DROP 0.5
 param set-default BAT_AVRG_CURRENT 13

 # Square quadrotor X PX4 numbering
@@ -68,9 +69,6 @@ param set-default MPC_THR_MIN 0.025
 param set-default MPC_VEL_MANUAL 5.0
 param set-default MPC_XY_VEL_MAX 8.0

-param set-default RC_CRSF_PRT_CFG 300
-param set-default RC_CRSF_TEL_EN 1
-
 param set-default RTL_RETURN_ALT 15

 param set-default SENS_FLOW_MINHGT 0.0
@@ -13,7 +13,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board px4_fmu-v6x exclude
 # @board diatone_mamba-f405-mk2 exclude
 #
 . ${R}etc/init.d/rc.mc_defaults
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name Generic Ground Vehicle (Deprecated)
+# @name Generic Ground Vehicle (Ackermann)
 #
 # @type Rover
 # @class Rover
@@ -48,3 +48,5 @@ param set-default PWM_MAIN_FUNC1 201
 param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101
+
+
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Rover Differential
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_differential_defaults
@@ -1,46 +0,0 @@
-#!/bin/sh
-#
-# @name Aion Robotics R1 UGV
-#
-# @url https://www.aionrobotics.com/r1
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_differential_defaults
-
-param set-default BAT1_N_CELLS 4
-
-# Set geometry & output configration
-param set-default RBCLW_ADDRESS 128
-param set-default RBCLW_FUNC1 101
-param set-default RBCLW_FUNC2 102
-param set-default RBCLW_REV 1 # reverse right wheels
-
-# Rover parameters
-param set-default RD_WHEEL_TRACK 0.3
-param set-default RD_MAN_YAW_SCALE 1
-param set-default RD_MAX_ACCEL 5
-param set-default RD_MAX_JERK 10
-param set-default RD_MAX_THR_YAW_R 4
-param set-default RD_YAW_RATE_P 0.1
-param set-default RD_YAW_RATE_I 0
-param set-default RD_YAW_P 5
-param set-default RD_YAW_I 0
-param set-default RD_MAX_SPEED 1.8
-param set-default RD_MAX_THR_SPD 2
-param set-default RD_SPEED_P 0.5
-param set-default RD_SPEED_I 0.1
-param set-default RD_MAX_YAW_RATE 300
-param set-default RD_MISS_SPD_DEF 1.8
-param set-default RD_TRANS_DRV_TRN 0.349066
-param set-default RD_TRANS_TRN_DRV 0.174533
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1
-param set-default PP_LOOKAHD_GAIN 1
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# @name Aion Robotics R1 UGV
+#
+# @url https://www.aionrobotics.com/r1
+#
+# @type Rover
+# @class Rover
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.rover_differential_defaults
+
+param set-default BAT1_N_CELLS 4
+
+param set-default EKF2_GBIAS_INIT 0.01
+param set-default EKF2_ANGERR_INIT 0.01
+
+# Set geometry & output configration
+param set-default RBCLW_ADDRESS 128
+param set-default RBCLW_FUNC1 101
+param set-default RBCLW_FUNC2 102
+param set-default RBCLW_REV 1 # reverse right wheels
@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name NXP Cup car: DF Robot GPX (Deprecated)
+# @name NXP Cup car: DF Robot GPX

 #
 # @type Rover
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Generic Rover Ackermann
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_ackermann_defaults
@@ -1,37 +0,0 @@
-#!/bin/sh
-#
-# @name Axial SCX10 2 Trail Honcho
-#
-# @url https://www.axialadventure.com/product/1-10-scx10-ii-trail-honcho-4wd-rock-crawler-brushed-rtr/AXID9059.html
-#
-# @type Rover
-# @class Rover
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.rover_ackermann_defaults
-
-param set-default BAT1_N_CELLS 3
-
-# Rover parameters
-param set-default NAV_ACC_RAD 0.5
-param set-default RA_ACC_RAD_GAIN 2
-param set-default RA_ACC_RAD_MAX 3
-param set-default RA_MAX_ACCEL 0.5
-param set-default RA_MAX_JERK 10
-param set-default RA_MAX_SPEED 2.7
-param set-default RA_MAX_STR_ANG 0.5236
-param set-default RA_MAX_STR_RATE 270
-param set-default RA_MISS_VEL_DEF 2.7
-param set-default RA_MISS_VEL_GAIN 3.5
-param set-default RA_MISS_VEL_MIN 1
-param set-default RA_SPEED_I 0.1
-param set-default RA_SPEED_P 0.5
-param set-default RA_WHEEL_BASE 0.321
-
-# Pure pursuit parameters
-param set-default PP_LOOKAHD_GAIN 1
-param set-default PP_LOOKAHD_MAX 10
-param set-default PP_LOOKAHD_MIN 1.5
@@ -42,3 +42,4 @@ param set-default CA_ROTOR3_KM 0
 param set-default CA_ROTOR3_PX 0
 param set-default CA_ROTOR3_PY -0.3
 param set-default CA_ROTOR3_PZ 0.3
+
@@ -31,3 +31,5 @@ param set-default CA_ROTOR4_PY 0.25
 param set-default CA_ROTOR5_PX -0.43
 param set-default CA_ROTOR5_PY -0.25
 param set-default CA_ROTOR5_KM -0.05
+
+
@@ -123,3 +123,4 @@ param set-default PWM_MAIN_FUNC6 106
 param set-default PWM_MAIN_TIM0 -1
 param set-default PWM_MAIN_TIM1 -1
 param set-default PWM_MAIN_TIM2 -1
+
@@ -31,3 +31,5 @@ param set-default CA_ROTOR4_PY -0.43
 param set-default CA_ROTOR5_PX -0.25
 param set-default CA_ROTOR5_PY 0.43
 param set-default CA_ROTOR5_KM -0.05
+
+
@@ -36,3 +36,5 @@ param set-default CA_ROTOR6_PY -0.46
 param set-default CA_ROTOR7_KM -0.05
 param set-default CA_ROTOR7_PX -0.19
 param set-default CA_ROTOR7_PY 0.46
+
+
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Andrew Brahim	85df8c2281	[BACKPORT 1.15] Sf45 initialization fixes and per-sector publishing (#25399 ) * SF45 fixes to restart the state machine if sensor does not init correctly (#23565) * fixes to restart the state machine if sensor does not init correctly Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * fixes Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * increase fail count Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * remove extra flush, switch from warn to debug, add enum states for sensor bring-up Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * remove dead code, decrease restart fail count metric, break out of loop with consec errors if over the fail count and not init Signed-off-by: dirksavage88 <dirksavage88@gmail.com> --------- Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * remove tel2 default from sf45 (#24602) Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * fix to orientation offsets for scaled yaw, removed unused param Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * Shift vertical orientation above scaling yaw operation, cp angle sign change Signed-off-by: dirksavage88 <dirksavage88@gmail.com> * SENS: RNG: SF45 changed data processing and publication design, moved to a publishing per sector design. other minor improvements * SENS: RNG: SF45: Fixed sf45 parser, added general checks to avoid potential out-of-bound access * SENS: RNG: SF45:Fix startup problems, increase frequency, robust parser, use nonblocking reads * SENS: RNG: SF45: Added timeout to sensor measurements, to compensate the lower loop time of CollisionPrevention --------- Signed-off-by: dirksavage88 <dirksavage88@gmail.com> Co-authored-by: Claudio Chies <61051109+Claudio-Chies@users.noreply.github.com> Co-authored-by: Alexander Lerach <alexander@auterion.com>	2025-10-13 21:20:55 -08:00
Alex Klimaj	d66956a682	[backport] boards: ark fpv fw vtol 1.15 (#24768 ) * boards: ark_fpv add vtol att control * boards: ark_fpv add camera trigger and capture drivers (#24643) * boards: ark_fpv add fw controller * boards: ark_fpv 1.15 backport change to old RC driver	2025-07-07 09:26:00 -08:00
Jacob Dahl	d9c5acb669	[BACKPORT 1.15] ark_fpv: use rc_input module, fix make upload (#25061 )	2025-06-16 18:51:23 -08:00
Julian Oes	a7659ddf12	boards: fix startup delay for all Kakute H7 This configures the RTC clock to use the HSE instead of the not existing LSE clock which prevents boot waiting for the not existing LSE crystal for a few seconds on startup.	2025-04-15 16:10:07 +12:00
Julian Oes	99c40407ff	gps: revert ubx changes, point to 1.15 branch This reverts UBX changes that we don't want to backport into v1.15. We now point to a release/1.15 branch within the PX4-GPSDrivers submodule.	2025-02-06 23:41:28 -05:00
bresch	03b4ad46e8	fw-att: fix wheel controller	2025-01-03 16:29:49 +01:00
Julian Oes	51000107a9	[BACKPORT v1.15] gps: heading fixes for NMEA/Unicore (#24092 ) * gps: heading fixes for NMEA/Unicore This updates the GPS submodule which includes NMEA/Unicore fixes: - Add correct return value for sat infos - Only publish on position updates - Request required topics at 5 Hz for Unicore * gps: build fix	2024-12-13 08:52:01 +13:00
Julian Oes	dba5383e99	boards: add SPA06 to KakuteH7/H7mini/H7v2 boards	2024-12-12 11:12:21 -05:00
Julian Oes	ca611f1580	drivers: add SPA06	2024-12-12 11:12:21 -05:00
Julian Oes	faa7bb91d0	drivers: Copy SPL06 to SPA06	2024-12-12 11:12:21 -05:00
Jacob Dahl	8017135965	Update platforms/nuttx/src/bootloader/stm/stm32_common/main.c	2024-11-19 12:19:19 -05:00
alexklimaj	eb76cc6001	stm32 bootloader: use STM32_CPUCLK_FREQUENCY for systick_mhz	2024-11-19 12:19:19 -05:00
alexklimaj	15dd55e86a	boards: ark fpv fix current adc	2024-11-19 12:19:19 -05:00
Alex Klimaj	4798b6b631	boards: ark fpv change bootloader uart to telem1 (#23898 )	2024-11-19 12:19:19 -05:00
Alex Klimaj	b8e7237317	boards: ark fpv add SCH16T (#23883 ) * boards: ark fpv add SCH16T * boards: ark fpv fix spi6	2024-11-19 12:19:19 -05:00
Alex Klimaj	510d6a1f70	boards: new ARK FPV FC (#23830 ) * add new payload power switch (RC_MAP_PAY_SW)	2024-11-19 12:19:19 -05:00
Alexis Guijarro	4817c0618a	mRo boards: Fix for USART clock selection (#23524 )	2024-11-06 12:20:00 -08:00
QiTao Weng	e85ffa0991	Add airspeed message to uxrce dds topics (#23847 ) Co-authored-by: Weng <q350w358@ENGR-GQT56X3-X.home.ku.edu>	2024-11-04 19:18:29 -09:00
Silvan Fuhrer	aa25964942	Navigator: land: set lat/lon fields of triplet to NAN if global position is not valid Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-10-31 13:34:45 +01:00
Julian Oes	53dda3576b	boards: add Septentrio GNSS drivers to 6XRT	2024-10-29 19:58:01 +13:00
Julian Oes	31582270ae	boards: add Sepentrio GNSS drivers to 6C and 6X	2024-10-29 19:58:01 +13:00
Jacob Dahl	93eef0c787	set file descriptor to -1 after close()	2024-10-01 13:13:18 -04:00
alexklimaj	dd5e81470c	failure detector use per index esc current	2024-09-30 15:45:56 -04:00
Mathieu Bresciani	1d06f62399	fix VehicleCommand.msg syntax	2024-09-30 15:28:24 -04:00
Daniel Agar	f5f7dfc45e	commander: ignore REQUEST_CAMERA_INFORMATION - add answer command logging	2024-09-30 15:28:24 -04:00
Ramon Roche	cf1c03e412	drivers/gnss/septentrio: disable default assignment of GPS1	2024-09-25 06:54:51 -07:00
Ramon Roche	30e763b678	Commander: lock down mav sys and comp id - keeps them as local params at init - only allow to set at init	2024-08-27 15:27:32 -04:00
Julian Oes	fe26cdebc0	stm32h7: Reset USART clock selection (#23498 ) (#23516 ) This resets the USARTs' clock source selection to the default, in case it has been changed by the bootloader. This is required if booting from the ArduPilot bootloader which happens to reset the clock selection to PLL. Without this fix, UARTs (including the console) is garbled, so presumably at an invalid baudrate.	2024-08-09 10:25:19 +12:00
Silvan Fuhrer	631f36b1ee	TECS: reduce default of FW_T_SPD_STD to reduce airspeed measurement delay Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-08-07 17:45:20 +02:00
Beat Küng	96cddf5ed1	fix metadata.cmake: add missing paths to json & xml parameter outputs (#23464 )	2024-08-07 08:39:43 +02:00
chiara-septentrio	5216453b39	drivers/gnss/septentrio : 1.15-compatible extracted septentrio driver, with new features and fixes (#23386 ) Co-authored-by: Chiara de Saint Giniez <chiarastginiez@gmail.com>	2024-07-25 11:39:38 -04:00
David Sidrane	3dc97908db	spracing_h7extreme:rcc Tack upstream name fix	2024-07-15 13:52:44 +02:00
Matthias Grob	762d87285c	Jankinsfile-compile: add missing comma after `ark_pi6x_default`	2024-07-15 13:52:44 +02:00
Matthias Grob	5216d5c569	SubscriptionInterval: move updated, update, copy function to a cpp file Saves 17.3 kilobytes of flash 😮	2024-07-15 11:31:52 +02:00
Matthias Grob	920005a235	uORB: SubscriptionInterval fix timestamp wrapping when initializing less than the interval time after boot (#23384 ) * SubscriptionInterval: ensure _last_update is never before timer start	2024-07-11 16:36:55 +02:00
Peter van der Perk	50dd011c5e	Update NuttX Backports: stm32h755II backport stm32h7: allow Ethernet MAC without PHY imxrt: imxrt11xx set core clock to 1p15v regardless of ocotp imxrt: Correctly update PLL, bit has to toggled instead of being set	2024-07-10 22:00:47 -04:00
Peter van der Perk	e00101b771	[BACKPORT] imxrt: Change PLL settings for more accurate dshot timing	2024-07-10 22:00:47 -04:00
Peter van der Perk	c8fedda09a	[BACKPORT] fmu-v6xrt: MTD use full FRAM (32KB)	2024-07-10 22:00:47 -04:00
alexklimaj	de07e2bef0	boards ark pi6x add vl53l0x	2024-06-26 17:09:48 -04:00
fury1895	9a422dbfe8	gimbal - input_mavlink: return NoUpdate by default	2024-06-19 14:49:04 +02:00
Julian Oes	e2558046b8	mavlink: enable gimbal controls in QGC over USB	2024-06-11 15:08:38 +12:00
Julian Oes	00b6df1de5	gimbal: fix auto RC and MAVLink mode This fixes various edge cases when input is set to both: RC and MAVLink gimbal protocol v2. Specifically: - We no longer immediately reset primary control if there is no update, otherwise this will reset immediately after an commands. - Talking of commands: GIMBAL_MANAGER_CONFIGURE no longer switches control to MAVLink but only an actual incoming setpoint command does. - And incoming setpoint command only triggers UpdatedActiveOnce which means we will check RC again afterwards and if there is big movement switch back to RC. That's the intuitive thing to do until we have better reporting about who/what is in control. - Also, with RC we no longer always set us to be in control but only on major movement.	2024-06-11 15:08:38 +12:00
Jacob Dahl	061373f45b	cdcacm_autostart: handle USB power only	2024-06-07 08:05:15 -04:00
Silvan Fuhrer	f3787708d7	VTOL: remove _dt passing as it's no longer used (and was wrong) Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-06-06 21:52:40 -04:00
Silvan Fuhrer	4fe51d4911	VTOL Standard: fix transition pusher motor slew rate Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-06-06 21:52:40 -04:00
Julian Oes	71bf06af56	boards: update all bootloaders	2024-06-07 09:24:40 +12:00
Peize-Liu	5f2568231d	[Fix][hkust_nxt-dual]:board hkust_nxt-dual fix hw_config.h missing APP_RESERVATION_SIZE param (#23204 )	2024-06-07 09:24:40 +12:00
Julian Oes	ce9109cf5e	Makefile: add missing bootloader targets Quite a few were missing, and everything on one line was hard to diff.	2024-06-07 09:24:40 +12:00
David Sidrane	ec2c91fa90	nxp/imxrt_common/main:Fix Breakage from `a9962dc`	2024-06-07 09:24:40 +12:00
Julian Oes	9f07f2a076	px_uploader: catch serial exception correctly Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Julian Oes	9dc3f6ea12	bootloader: remove unused/duplicate defines	2024-06-07 09:24:40 +12:00
Julian Oes	0d957e9e87	bootloader: track ArduPilot protocol Just so we don't conflict on these commands in the future.	2024-06-07 09:24:40 +12:00
Julian Oes	62e61a3d7e	px_uploader.py: clean up various tidbits Includes: - Remove some of the outdated Python2 checks and compatibility. - Try not catch all exceptions but only the expected ones. Otherwise, this makes it really hard to debug if anything unexpected actually goes wrong. - Make use of fstrings. - Make output slightly prettier. Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Julian Oes	cc83186dcc	bootloader: add bootloader version This adds a new protocol extension which allows to get the bootloader version. The bootloader version is different from the bootloader protocol revision which has stabilized at 5 and is not easy to update unless a bootloader is actually breaking the protocol. The reason being that both the Python script as well as the uploader used in QGC will not attempt to load firmware if they don't know the bootloader version, so it could basically be considered a "breaking" protocol revision. Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Julian Oes	eb9fd7ec76	tools/bootloader: add force-erase option If the STM32H7 fails to program or erase a full chunk of 256 bytes, the ECC check will trigger a busfault when trying to read from it. To speed up erasing and optimize wear, we read before erasing to check if it actually needs erasing. That's when a busfault happens and the erase time outs. The workaround is to add an option to do a full erase without check. Credit goes to: https://github.com/ArduPilot/ardupilot/pull/22090 And the protocol option added to the bootloader is the same as for ArduPilot, so compatible. Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Peter van der Perk	d8655fdde9	[BACKPORT] fmu-v6xrt: Support RC telemetry	2024-06-05 11:15:45 -04:00
Peter van der Perk	d8b6b2a5ad	[BACKPORT] fmu-v6xrt: Fix flash configuration Fixes correct dummy cycle count of 20	2024-06-05 11:15:45 -04:00
David Sidrane	ef9b1b75c3	[BACKPORT] Update px4_fmu-v6xrt Bootloader	2024-06-05 11:15:45 -04:00
David Sidrane	f10650e114	[BACKPORT] px4_fmu-v6xrt & bootloader:Bootloader enusres that ITCM memory is writable before jump to APP	2024-06-05 11:15:45 -04:00
David Sidrane	82a259cebe	[BACKPORT] bootloader/common/bl.c:Fixed Wrong vec_base caculation - only effects imxrt	2024-06-05 11:15:45 -04:00
David Sidrane	5903a815b7	NuttX with imxrt:lpuart & 1170 MPU Backports [BACKPORT] imxrt: lpuart singlewire transfer support These correctly enables mpu_rest on MPU init if CONFIG_ARM_MPU_RESET is defined. [BACKPORT] imxrt: 1170 MPU config ensure no lockups can occur [BACKPORT] armv{7\|8}-{m\|r}:MPU fix CONFIG naming to include ARM	2024-06-05 11:15:45 -04:00
Peter van der Perk	b5e5b2a186	[BACKPORT] dronecan: SocketCAN driver check size before copying Avoids memory corruption if we get packets to big	2024-06-05 11:15:45 -04:00
Peter van der Perk	901ac16583	[BACKPORT] fmu-v6xrt: Add I2C driver launcher	2024-06-05 11:15:45 -04:00
Peter van der Perk	27ed745b95	[BACKPORT] fmu-v6xrt: Enable debug features for more verbose hardfault output	2024-06-05 11:15:45 -04:00
David Sidrane	0ca57a5547	NuttX with imxrt_sd-preflight backport	2024-06-05 11:15:45 -04:00
David Sidrane	d182b202c8	[BACKPORT] px4_fmu-v6xrt:Support_MMCSD_MULTIBLOCK with preflight	2024-06-05 11:15:45 -04:00
alexklimaj	192bbd177b	airframes: dexi remove EKF2_HGT_REF default	2024-05-29 20:39:10 -04:00
alexklimaj	bb1f104a1a	boards: ark-pi6x remove ekf delay param defaults	2024-05-29 11:23:16 -04:00
Jacob Dahl	e173520273	boards: ark: pi6x: CONFIG_DRIVERS_CDCACM_AUTOSTART=y (#23163 )	2024-05-29 11:23:16 -04:00
Jacob Dahl	b8e43e1649	[mavlink] Parameter to always start on USB (#22234 ) * usb: Added parameter to enable always starting mavlink on USB. Refactored cdcacm_init into a module and added a paramter to allow always starting mavlink on USB, also added a paramter to choose the mode. The current default behavior is to wait and listen for data on USB and auto-detect the protocol (mavlink, nsh, ublox). This results in the mavlink stream not starting until something else on the mavlink network sends a packet first. The new default behavior is to always start mavlink. Added parameters MAV_USB_ENABLE -- default 1 (always start mavlink on USB) MAV_USE_MODE -- default 3 (onboard) * added 3 retries for opening serial port in mavlink, removed sleep before sercon * added DRIVERS_CDCACM_AUTOSTART to ark-v6x default.px4board * added CONFIG_DRIVERS_CDCACM_AUTOSTART=y to default.px4board for boards with CONFIG_CDCACM in their nsh/defconfig * format * remove PGA460 from COMMON_DISTANCE_SENSOR to save flash * remove LIS2MDL from COMMON_MAGNETOMETER to save flash * disable CONFIG_DRIVERS_CDCACM_AUTOSTART for fmu-v5 protected.px4board * moved and renamed parameters, removed mode logic in mavlink * changed parameter names, added mode none * remove parameters from mavlink	2024-05-29 11:23:16 -04:00
alexklimaj	a59b6fe5e9	boards: add iis2mdc mag to ark pi6x	2024-05-29 11:23:16 -04:00
Jacob Dahl	3b0a712c70	drivers/magnetometer: new ST IIS2MDC Magnetometer driver	2024-05-29 11:23:16 -04:00
Alexis Guijarro	60138da56b	mRo Control Zero Classic: Definition for GPS2 by default added	2024-05-23 18:29:10 -07:00