TEMP

- matrix in PX4/Firmware (d9ebf2a842f611976d7ba5078d3f31ad8cde55a7): https://github.com/PX4/PX4-Matrix/commit/3679f7fd5160c7d2a8271b1134ca1e601f1a4254
    - matrix current upstream: https://github.com/PX4/PX4-Matrix/commit/1d0e7f1ca1187c90c70a9dac92ca6294a320b1d3
    - Changes: https://github.com/PX4/PX4-Matrix/compare/3679f7fd5160c7d2a8271b1134ca1e601f1a4254...1d0e7f1ca1187c90c70a9dac92ca6294a320b1d3

    1d0e7f1 2021-04-14 Daniel Agar - Matrix: use naive per element copy instead of memcpy call
1344ce0 2021-04-14 Daniel Agar - Euler: simplify DCM constructor

.ci/Jenkinsfile-compile

@@ -46,9 +46,7 @@ pipeline {
                      "cuav_can-gps-v1_default",
                      "cuav_nora_default",
                      "cuav_x7pro_default",
-                     "cubepilot_cubeorange_console",
                      "cubepilot_cubeorange_default",
-                     "cubepilot_cubeyellow_console",
                      "cubepilot_cubeyellow_default",
                      "holybro_can-gps-v1_canbootloader",
                      "holybro_can-gps-v1_default",
@@ -56,6 +54,7 @@ pipeline {
                      "holybro_kakutef7_default",
                      "holybro_pix32v5_default",
                      "modalai_fc-v1_default",
+                     "modalai_fc-v1_rtps",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
                      "mro_ctrl-zero-h7_default",
@@ -77,7 +76,6 @@ pipeline {
                      "px4_fmu-v2_fixedwing",
                      "px4_fmu-v2_multicopter",
                      "px4_fmu-v2_rover",
-                     "px4_fmu-v2_test",
                      "px4_fmu-v3_default",
                      "px4_fmu-v4_cannode",
                      "px4_fmu-v4_default",
@@ -96,7 +94,6 @@ pipeline {
                      "px4_fmu-v5x_base_phy_DP83848C",
                      "px4_fmu-v5x_default",
                      "px4_fmu-v6u_default",
-                     "px4_fmu-v6u_test",
                      "px4_fmu-v6x_default",
                      "px4_io-v2_default",
                      "spracing_h7extreme_default",

.ci/Jenkinsfile-hardware

@@ -7,9 +7,9 @@ pipeline {
 
       parallel {
 
-        stage("cubepilot_cubeorange_console") {
+        stage("cubepilot_cubeorange_test") {
           stages {
-            stage("build cubepilot_cubeorange_console") {
+            stage("build cubepilot_cubeorange_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -22,10 +22,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make cubepilot_cubeorange_console'
+                sh 'make cubepilot_cubeorange_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_console'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cubepilot_cubeorange_test'
               }
               post {
                 always {
@@ -42,9 +42,9 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'cubepilot_cubeorange_console'
+                    unstash 'cubepilot_cubeorange_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_console/cubepilot_cubeorange_console.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
@@ -52,12 +52,12 @@ pipeline {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/cubepilot_io-v2_default.bin" || true' // force px4io update
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -84,9 +84,9 @@ pipeline {
           }
         }
 
-        stage("cuav_x7pro_default") {
+        stage("cuav_x7pro_test") {
           stages {
-            stage("build cuav_x7pro_default") {
+            stage("build cuav_x7pro_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -99,10 +99,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make cuav_x7pro_default'
+                sh 'make cuav_x7pro_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'cuav_x7pro_test'
               }
               post {
                 always {
@@ -119,21 +119,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'cuav_x7pro_default'
+                    unstash 'cuav_x7pro_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_default/cuav_x7pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/cuav_x7pro_test/cuav_x7pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 2000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -160,61 +160,9 @@ pipeline {
           }
         }
 
-        // stage("px4_fmu-v2_test") {
-        //   stages {
-        //     stage("build px4_fmu-v2_test") {
-        //       agent {
-        //         docker {
-        //           image 'px4io/px4-dev-nuttx-focal:2020-09-14'
-        //           args '-e CCACHE_BASEDIR=$WORKSPACE -v ${CCACHE_DIR}:${CCACHE_DIR}:rw'
-        //         }
-        //       }
-        //       steps {
-        //         sh 'export'
-        //         sh 'make distclean'
-        //         sh 'ccache -s'
-        //         sh 'git fetch --tags'
-        //         sh 'make px4_fmu-v2_test'
-        //         sh 'make sizes'
-        //         sh 'ccache -s'
-        //         stash includes: 'build/px4_fmu-v2_test/px4_fmu-v2_test.elf', name: 'px4_fmu-v2_test'
-        //       }
-        //       post {
-        //         always {
-        //             sh 'make distclean'
-        //         }
-        //       }
-        //     } // stage build
-        //     stage("test") {
-        //       agent {
-        //         label 'px4_fmu-v2'
-        //       }
-        //       stages {
-        //         stage("flash") {
-        //           steps {
-        //             sh 'export'
-        //             sh 'find /dev/serial'
-        //             unstash 'px4_fmu-v2_test'
-        //             // flash board and watch bootup
-        //             sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v2_test/px4_fmu-v2_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
-        //           }
-        //         }
-        //         stage("reset") {
-        //           steps {
-        //             cleanupFTDI();
-        //           }
-        //         }
-        //       }
-        //       options {
-        //         timeout(time: 90, unit: 'MINUTES')
-        //       }
-        //     }
-        //   }
-        // }
-
-        stage("px4_fmu-v3_default") {
+        stage("px4_fmu-v3_test") {
           stages {
-            stage("build px4_fmu-v3_default") {
+            stage("build px4_fmu-v3_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -227,10 +175,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v3_default'
+                sh 'make px4_fmu-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v3_test'
               }
               post {
                 always {
@@ -247,21 +195,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v3_default'
+                    unstash 'px4_fmu-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_default/px4_fmu-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -288,9 +236,9 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v4_default") {
+        stage("px4_fmu-v4_test") {
           stages {
-            stage("build px4_fmu-v4_default") {
+            stage("build px4_fmu-v4_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -303,10 +251,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4_default'
+                sh 'make px4_fmu-v4_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4_test'
               }
               post {
                 always {
@@ -323,20 +271,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4_default'
+                    unstash 'px4_fmu-v4_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_default/px4_fmu-v4_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -363,9 +312,9 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v4pro_default") {
+        stage("px4_fmu-v4pro_test") {
           stages {
-            stage("build px4_fmu-v4pro_default") {
+            stage("build px4_fmu-v4pro_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -378,10 +327,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v4pro_default'
+                sh 'make px4_fmu-v4pro_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v4pro_test'
               }
               post {
                 always {
@@ -398,21 +347,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v4pro_default'
+                    unstash 'px4_fmu-v4pro_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_default/px4_fmu-v4pro_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"'   // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -439,9 +388,9 @@ pipeline {
           }
         }
 
-        stage("px4_fmu-v5_default") {
+        stage("px4_fmu-v5_test") {
           stages {
-            stage("build px4_fmu-v5_default") {
+            stage("build px4_fmu-v5_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -454,10 +403,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make px4_fmu-v5_default'
+                sh 'make px4_fmu-v5_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'px4_fmu-v5_test'
               }
               post {
                 always {
@@ -474,21 +423,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'px4_fmu-v5_default'
+                    unstash 'px4_fmu-v5_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_default/px4_fmu-v5_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -561,13 +510,14 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'   // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -637,12 +587,13 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -715,13 +666,14 @@ pipeline {
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'   // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"'  // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'        // limit cpu usage
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -748,9 +700,9 @@ pipeline {
           }
         }
 
-        stage("modalai_fc-v1_default") {
+        stage("modalai_fc-v1_test") {
           stages {
-            stage("build modalai_fc-v1_default") {
+            stage("build modalai_fc-v1_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -763,10 +715,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make modalai_fc-v1_default'
+                sh 'make modalai_fc-v1_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'modalai_fc-v1_test'
               }
               post {
                 always {
@@ -783,20 +735,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'modalai_fc-v1_default'
+                    unstash 'modalai_fc-v1_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_default/modalai_fc-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/modalai_fc-v1_test/modalai_fc-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic vtol standardulticopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -823,9 +776,9 @@ pipeline {
           }
         }
 
-        stage("holybro_durandal-v1_default") {
+        stage("holybro_durandal-v1_test") {
           stages {
-            stage("build holybro_durandal-v1_default") {
+            stage("build holybro_durandal-v1_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -838,10 +791,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make holybro_durandal-v1_default'
+                sh 'make holybro_durandal-v1_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'holybro_durandal-v1_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'holybro_durandal-v1_test'
               }
               post {
                 always {
@@ -858,24 +811,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'holybro_durandal-v1_default'
+                    unstash 'holybro_durandal-v1_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_default/holybro_durandal-v1_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/holybro_durandal-v1_test/holybro_durandal-v1_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set DSHOT_CONFIG 600"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 4000"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_USE_IO 0"'          // for dshot
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -903,9 +853,9 @@ pipeline {
           }
         }
 
-        stage("nxp_fmuk66-v3_default") {
+        stage("nxp_fmuk66-v3_test") {
           stages {
-            stage("build nxp_fmuk66-v3_default") {
+            stage("build nxp_fmuk66-v3_test") {
               agent {
                 docker {
                   image 'px4io/px4-dev-nuttx-focal:2020-09-14'
@@ -918,10 +868,10 @@ pipeline {
                 sh 'make distclean'
                 sh 'ccache -s'
                 sh 'git fetch --tags'
-                sh 'make nxp_fmuk66-v3_default'
+                sh 'make nxp_fmuk66-v3_test'
                 sh 'make sizes'
                 sh 'ccache -s'
-                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_default'
+                stash includes: 'build/*/*.elf, platforms/nuttx/Debug/upload_jlink_gdb.sh, Tools/HIL/*.py', name: 'nxp_fmuk66-v3_test'
               }
               post {
                 always {
@@ -938,20 +888,21 @@ pipeline {
                   steps {
                     sh 'export'
                     sh 'find /dev/serial'
-                    unstash 'nxp_fmuk66-v3_default'
+                    unstash 'nxp_fmuk66-v3_test'
                     // flash board and watch bootup
-                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_default/nxp_fmuk66-v3_default.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
+                    sh './platforms/nuttx/Debug/upload_jlink_gdb.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf && ./Tools/HIL/monitor_firmware_upload.py --device `find /dev/serial -name *usb-*` --baudrate 57600'
                   }
                 }
                 stage("configure") {
                   steps {
                     // configure
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'    // disable buzzer
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'    // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'       // update bootloader
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param status"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                  // reboot to apply
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show"'
                   }
                 }
                 stage("status") {
@@ -1027,6 +978,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_accel_fifo"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_baro"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_combined"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gps"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag"'
@@ -1038,6 +990,7 @@ void statusFTDI() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_acceleration"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_angular_velocity"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_attitude"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_gps_position"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_imu_status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener vehicle_local_position"'

.github/workflows/compile_nuttx.yml

@@ -17,28 +17,33 @@ jobs:
         config: [
           airmind_mindpx-v2_default,
           ark_can-flow_canbootloader,
+          ark_can-flow_debug,
           ark_can-flow_default,
           av_x-v1_default,
           bitcraze_crazyflie21_default,
           bitcraze_crazyflie_default,
           cuav_can-gps-v1_canbootloader,
+          cuav_can-gps-v1_debug,
           cuav_can-gps-v1_default,
           cuav_nora_default,
           cuav_x7pro_default,
-          cubepilot_cubeorange_console,
           cubepilot_cubeorange_default,
-          cubepilot_cubeyellow_console,
+          cubepilot_cubeorange_test,
           cubepilot_cubeyellow_default,
+          cubepilot_cubeyellow_test,
+          cubepilot_io-v2_default,
           holybro_can-gps-v1_canbootloader,
+          holybro_can-gps-v1_debug,
           holybro_can-gps-v1_default,
           holybro_durandal-v1_default,
           holybro_kakutef7_default,
           holybro_pix32v5_default,
           modalai_fc-v1_default,
-          mro_ctrl-zero-f7_default,
+          modalai_fc-v1_rtps,
           mro_ctrl-zero-f7-oem_default,
-          mro_ctrl-zero-h7_default,
+          mro_ctrl-zero-f7_default,
           mro_ctrl-zero-h7-oem_default,
+          mro_ctrl-zero-h7_default,
           mro_pixracerpro_default,
           mro_x21-777_default,
           mro_x21_default,
@@ -49,31 +54,31 @@ jobs:
           nxp_fmuk66-v3_rtps,
           nxp_fmuk66-v3_socketcan,
           nxp_fmurt1062-v1_default,
-          nxp_ucans32k146_default,
           nxp_ucans32k146_canbootloader,
+          nxp_ucans32k146_default,
           omnibus_f4sd_default,
           px4_fmu-v2_default,
           px4_fmu-v2_fixedwing,
           px4_fmu-v2_multicopter,
           px4_fmu-v2_rover,
-          px4_fmu-v2_test,
           px4_fmu-v3_default,
           px4_fmu-v4_cannode,
           px4_fmu-v4_default,
           px4_fmu-v4pro_default,
           px4_fmu-v5_ctrlalloc,
+          px4_fmu-v5_debug,
           px4_fmu-v5_default,
           px4_fmu-v5_fixedwing,
           px4_fmu-v5_multicopter,
           px4_fmu-v5_optimized,
           px4_fmu-v5_rover,
           px4_fmu-v5_rtps,
+          px4_fmu-v5_stackcheck,
           px4_fmu-v5_uavcanv0periph,
           px4_fmu-v5_uavcanv1,
           px4_fmu-v5x_base_phy_DP83848C,
           px4_fmu-v5x_default,
           px4_fmu-v6u_default,
-          px4_fmu-v6u_test,
           px4_fmu-v6x_default,
           px4_io-v2_default,
           spracing_h7extreme_default,

.github/workflows/sitl_tests.yml

@@ -28,9 +28,9 @@ jobs:
         token: ${{ secrets.ACCESS_TOKEN }}
 
     - name: Download MAVSDK
-      run: wget https://github.com/mavlink/MAVSDK/releases/download/v0.36.0/mavsdk_0.36.0_ubuntu20.04_amd64.deb
+      run: wget https://github.com/mavlink/MAVSDK/releases/download/v0.38.0/mavsdk_0.38.0_ubuntu20.04_amd64.deb
     - name: Install MAVSDK
-      run: dpkg -i mavsdk_0.36.0_ubuntu20.04_amd64.deb
+      run: dpkg -i mavsdk_0.38.0_ubuntu20.04_amd64.deb
 
     - name: Prepare ccache timestamp
       id: ccache_cache_timestamp

.gitmodules

@@ -59,7 +59,7 @@
 	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/public_regulated_data_types"]
 	path = src/drivers/uavcannode_gps_demo/public_regulated_data_types
-	url = https://github.com/UAVCAN/public_regulated_data_types
+	url = https://github.com/UAVCAN/public_regulated_data_types.git
 [submodule "src/drivers/uavcannode_gps_demo/libcanard"]
 	path = src/drivers/uavcannode_gps_demo/libcanard
-	url = https://github.com/UAVCAN/libcanard
+	url = https://github.com/UAVCAN/libcanard.git

.vscode/cmake-variants.yaml

@@ -96,21 +96,26 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: cuav_x7pro_default
-    cubepilot_cubeorange_default:
+    cubepilot_cubeorange_test:
       short: cubepilot_cubeorange
       buildType: MinSizeRel
       settings:
-        CONFIG: cubepilot_orange_default
-    cubepilot_cubeyellow_default:
-      short: cubepilot_cubeyellow
-      buildType: MinSizeRel
-      settings:
-        CONFIG: cubepilot_cubeyellow_default
+        CONFIG: cubepilot_orange_test
     emlid_navio2_default:
       short: emlid_navio2
       buildType: MinSizeRel
       settings:
         CONFIG: emlid_navio2_default
+    holybro_can-gps-v1_canbootloader:
+      short: holybro_can-gps-v1_canbootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: holybro_can-gps-v1_canbootloader
+    holybro_can-gps-v1_default:
+      short: holybro_can-gps-v1_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: holybro_can-gps-v1_default
     holybro_durandal-v1_default:
       short: holybro_durandal-v1
       buildType: MinSizeRel

Jenkinsfile

@@ -89,6 +89,7 @@ pipeline {
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make airframe_metadata'
             dir('build/px4_sitl_default/docs') {
               archiveArtifacts(artifacts: 'airframes.md, airframes.xml')
@@ -108,10 +109,11 @@ pipeline {
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make parameters_metadata'
             dir('build/px4_sitl_default/docs') {
-              archiveArtifacts(artifacts: 'parameters.md, parameters.xml, params.json.xz')
-              stash includes: 'parameters.md, parameters.xml, params.json.xz', name: 'metadata_parameters'
+              archiveArtifacts(artifacts: 'parameters.md, parameters.xml, parameters.json.xz')
+              stash includes: 'parameters.md, parameters.xml, parameters.json.xz', name: 'metadata_parameters'
             }
           }
           post {
@@ -127,6 +129,7 @@ pipeline {
           }
           steps {
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make module_documentation'
             dir('build/px4_sitl_default/docs') {
               archiveArtifacts(artifacts: 'modules/*.md')
@@ -150,6 +153,7 @@ pipeline {
           steps {
             sh 'export'
             sh 'make distclean'
+            sh 'git fetch --all --tags'
             sh 'make uorb_graphs'
             dir('Tools/uorb_graph') {
               archiveArtifacts(artifacts: 'graph_px4_sitl.json')
@@ -342,7 +346,7 @@ pipeline {
             withAWS(credentials: 'px4_aws_s3_key', region: 'us-east-1') {
               s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'airframes.xml', path: 'Firmware/master/')
               s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'parameters.xml', path: 'Firmware/master/')
-              s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'params.json.xz', path: 'Firmware/master/')
+              s3Upload(acl: 'PublicRead', bucket: 'px4-travis', file: 'parameters.json.xz', path: 'Firmware/master/')
             }
           }
           when {

Makefile

@@ -303,7 +303,7 @@ check_%:
 	@echo
 
 uorb_graphs:
-	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --file Tools/uorb_graph/graph_full
+	@./Tools/uorb_graph/create.py --src-path src --exclude-path src/examples --exclude-path src/lib --file Tools/uorb_graph/graph_full
 	@$(MAKE) --no-print-directory px4_fmu-v2_default uorb_graph
 	@$(MAKE) --no-print-directory px4_fmu-v4_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph

README.md

@@ -17,7 +17,7 @@ PX4 is highly portable, OS-independent and supports Linux, NuttX and QuRT out of
   * [VTOL](https://docs.px4.io/master/en/frames_vtol/)
   * [Autogyro](https://docs.px4.io/master/en/frames_autogyro/)
   * [Rover](https://docs.px4.io/master/en/frames_rover/)
-  * many more experimental types (Blimps, Boats, Submarines, Autogyros, etc)
+  * many more experimental types (Blimps, Boats, Submarines, High altitude balloons, etc)
 * Releases: [Downloads](https://github.com/PX4/PX4-Autopilot/releases)
 
 
@@ -85,23 +85,24 @@ See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and
 This repository contains code supporting Pixhawk standard boards (best supported, best tested, recommended choice) and proprietary boards.
 
 ### Pixhawk Standard Boards
-  * FMUv2
-    * [Pixhawk](https://docs.px4.io/master/en/flight_controller/pixhawk.html)
-    * [Pixfalcon](https://docs.px4.io/master/en/flight_controller/pixfalcon.html)
-  * FMUv3
+  * FMUv6X and FMUv6U (STM32H7, 2021)
+    * Various vendors will provide FMUv6X and FMUv6U based designs Q3/2021
+  * FMUv5 and FMUv5X (STM32F7, 2019/20)
+    * [Pixhawk 4 (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4.html)
+    * [Pixhawk 4 mini (FMUv5)](https://docs.px4.io/master/en/flight_controller/pixhawk4_mini.html)
+    * [CUAV V5+ (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_plus.html)
+    * [CUAV V5 nano (FMUv5)](https://docs.px4.io/master/en/flight_controller/cuav_v5_nano.html)
+    * [Auterion Skynode (FMUv5X)](https://docs.px4.io/master/en/flight_controller/auterion_skynode.html)
+  * FMUv4 (STM32F4, 2015)
+    * [Pixracer](https://docs.px4.io/master/en/flight_controller/pixracer.html)
+    * [Pixhawk 3 Pro](https://docs.px4.io/master/en/flight_controller/pixhawk3_pro.html)
+  * FMUv3 (STM32F4, 2014)
     * [Pixhawk 2](https://docs.px4.io/master/en/flight_controller/pixhawk-2.html)
     * [Pixhawk Mini](https://docs.px4.io/master/en/flight_controller/pixhawk_mini.html)
     * [CUAV Pixhack v3](https://docs.px4.io/master/en/flight_controller/pixhack_v3.html)
-  * FMUv4 (STM32F4)
-    * [Pixracer](https://docs.px4.io/master/en/flight_controller/pixracer.html)
-    * [Pixhawk 3 Pro](https://docs.px4.io/master/en/flight_controller/pixhawk3_pro.html)
-  * FMUv5 (STM32F7)
-    * [Pixhawk 4](https://docs.px4.io/master/en/flight_controller/pixhawk4.html)
-    * [Pixhawk 4 mini](https://docs.px4.io/master/en/flight_controller/pixhawk4_mini.html)
-    * [CUAV V5+](https://docs.px4.io/master/en/flight_controller/cuav_v5_plus.html)
-    * [CUAV V5 nano](https://docs.px4.io/master/en/flight_controller/cuav_v5_nano.html)
-  * FMUv6X and FMUv6U (STM32H7)
-    * Various vendors will provide FMUv6X and FMUv6U based designs Q2/2021
+  * FMUv2 (STM32F4, 2013)
+    * [Pixhawk](https://docs.px4.io/master/en/flight_controller/pixhawk.html)
+    * [Pixfalcon](https://docs.px4.io/master/en/flight_controller/pixfalcon.html)
 
 ### Manufacturer and Community supported
   * [Holybro Durandal](https://docs.px4.io/master/en/flight_controller/durandal.html)

ROMFS/cannode/init.d/rcS

@@ -76,15 +76,6 @@ unset BOARD_RC_DEFAULTS
 #
 rgbled start -X -q
 rgbled_ncp5623c start -X -q
-rgbled_pwm start
-
-if param greater -s LIGHT_EN_BLINKM 0
-then
-	if blinkm start -X
-	then
-		blinkm systemstate
-	fi
-fi
 
 #
 # board sensors: rc.sensors

ROMFS/px4fmu_common/init.d-posix/airframes/10017_iris_ctrlalloc

@@ -10,43 +10,39 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc
 
-if [ $AUTOCNF = yes ]
-then
-	param set MPC_USE_HTE 0
+param set-default MPC_USE_HTE 0
 
-	param set VM_MASS 1.5
-	param set VM_INERTIA_XX 0.03
-	param set VM_INERTIA_YY 0.03
-	param set VM_INERTIA_ZZ 0.05
+param set-default VM_MASS 1.5
+param set-default VM_INERTIA_XX 0.03
+param set-default VM_INERTIA_YY 0.03
+param set-default VM_INERTIA_ZZ 0.05
 
-	param set CA_AIRFRAME 0
-	param set CA_METHOD 1
-	param set CA_ACT0_MIN 0.0
-	param set CA_ACT1_MIN 0.0
-	param set CA_ACT2_MIN 0.0
-	param set CA_ACT3_MIN 0.0
-	param set CA_ACT0_MAX 1.0
-	param set CA_ACT1_MAX 1.0
-	param set CA_ACT2_MAX 1.0
-	param set CA_ACT3_MAX 1.0
+param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
 
-	param set CA_MC_R0_PX 0.1515
-	param set CA_MC_R0_PY 0.245
-	param set CA_MC_R0_CT 6.5
-	param set CA_MC_R0_KM 0.05
-	param set CA_MC_R1_PX -0.1515
-	param set CA_MC_R1_PY -0.1875
-	param set CA_MC_R1_CT 6.5
-	param set CA_MC_R1_KM 0.05
-	param set CA_MC_R2_PX 0.1515
-	param set CA_MC_R2_PY -0.245
-	param set CA_MC_R2_CT 6.5
-	param set CA_MC_R2_KM -0.05
-	param set CA_MC_R3_PX -0.1515
-	param set CA_MC_R3_PY 0.1875
-	param set CA_MC_R3_CT 6.5
-	param set CA_MC_R3_KM -0.05
-
-fi
+param set-default CA_MC_R0_PX 0.1515
+param set-default CA_MC_R0_PY 0.245
+param set-default CA_MC_R0_CT 6.5
+param set-default CA_MC_R0_KM 0.05
+param set-default CA_MC_R1_PX -0.1515
+param set-default CA_MC_R1_PY -0.1875
+param set-default CA_MC_R1_CT 6.5
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.1515
+param set-default CA_MC_R2_PY -0.245
+param set-default CA_MC_R2_CT 6.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.1515
+param set-default CA_MC_R3_PY 0.1875
+param set-default CA_MC_R3_CT 6.5
+param set-default CA_MC_R3_KM -0.05
 
 set MIXER direct

ROMFS/px4fmu_common/init.d-posix/airframes/10018_iris_foggy_lidar

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_RNG_AID 1
-	param set EKF2_RNG_A_HMAX 10
-fi
+param set-default EKF2_RNG_AID 1
+param set-default EKF2_RNG_A_HMAX 10
+

ROMFS/px4fmu_common/init.d-posix/airframes/10020_if750a

@@ -8,15 +8,12 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Multi GPS blending (as the model has 2 GPS's)
-	param set EKF2_GPS_MASK 7 # Uses speed, hpos and vpos accuracy
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_MODE_OUT 2
-	param set MNT_DO_STAB 2
-fi
+# EKF2: Multi GPS blending (as the model has 2 GPS's)
+param set-default SENS_GPS_MASK 7
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MNT_DO_STAB 2
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1010_iris_opt_flow

@@ -7,16 +7,14 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2
-	param set EKF2_AID_MASK 2
-	param set EKF2_EVP_NOISE 0.05
-	param set EKF2_EVA_NOISE 0.05
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
 
-	# LPE: Flow-only mode
-	param set LPE_FUSION 242
-	param set LPE_FAKE_ORIGIN 1
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
 
-	param set MPC_ALT_MODE 2
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1011_iris_irlock

@@ -7,12 +7,9 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# enable fusion of landing target velocity
-	param set LTEST_MODE 1
-	param set PLD_HACC_RAD 0.1
-fi
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
 
 # Start up Landing Target Estimator module
 landing_target_estimator start

ROMFS/px4fmu_common/init.d-posix/airframes/1012_iris_rplidar

@@ -7,7 +7,5 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set LPE_FUSION 242
-fi
+param set-default LPE_FUSION 242
+

ROMFS/px4fmu_common/init.d-posix/airframes/1013_iris_vision

@@ -7,15 +7,13 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Vision position and heading
-	param set EKF2_AID_MASK 24
-	param set EKF2_EV_DELAY 5
+# EKF2: Vision position and heading
+param set-default EKF2_AID_MASK 24
+param set-default EKF2_EV_DELAY 5
 
-	# LPE: Vision + baro
-	param set LPE_FUSION 132
+# LPE: Vision + baro
+param set-default LPE_FUSION 132
+
+# AEQ: External heading set to use vision input
+param set-default ATT_EXT_HDG_M 1
 
-	# AEQ: External heading set to use vision input
-	param set ATT_EXT_HDG_M 1
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1014_solo

@@ -7,10 +7,7 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.1
-	param set MC_ROLLRATE_P 0.1
-fi
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_ROLLRATE_P 0.1
 
 set MIXER quad_x

ROMFS/px4fmu_common/init.d-posix/airframes/1015_iris_obs_avoid

@@ -7,8 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	param set COM_OBS_AVOID 1
-	param set MPC_XY_CRUISE 5.0
-fi
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+

ROMFS/px4fmu_common/init.d-posix/airframes/1017_iris_opt_flow_mockup

@@ -7,15 +7,12 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2
-	param set EKF2_AID_MASK 2
-	param set SENS_FLOW_ROT 0
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default SENS_FLOW_ROT 0
 
-	# LPE: Flow-only mode
-	param set LPE_FUSION 242
-	param set LPE_FAKE_ORIGIN 1
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
 
-	param set MPC_ALT_MODE 2
-fi
+param set-default MPC_ALT_MODE 2

ROMFS/px4fmu_common/init.d-posix/airframes/1018_iris_vision_velocity

@@ -7,9 +7,6 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Vision velocity and heading
-	param set EKF2_AID_MASK 272
-	param set EKF2_EV_DELAY 5
-fi
+# EKF2: Vision velocity and heading
+param set-default EKF2_AID_MASK 272
+param set-default EKF2_EV_DELAY 5

ROMFS/px4fmu_common/init.d-posix/airframes/1019_iris_dual_gps

@@ -7,8 +7,5 @@
 
 . ${R}etc/init.d-posix/airframes/10016_iris
 
-if [ $AUTOCNF = yes ]
-then
-	# EKF2: Multi GPS blending
-	param set EKF2_GPS_MASK 7 # Uses speed, hpos and vpos accuracy
-fi
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7

ROMFS/px4fmu_common/init.d-posix/airframes/1020_uuv_generic

@@ -5,16 +5,13 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
-	#param set CBRK_GPSFAIL 240024
-fi
+#param set CBRK_GPSFAIL 240024
 
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

ROMFS/px4fmu_common/init.d-posix/airframes/1021_uuv_hippocampus

@@ -5,16 +5,13 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
-	#param set CBRK_GPSFAIL 240024
-fi
+#param set CBRK_GPSFAIL 240024
 
 set MAV_TYPE 12
 param set MAV_TYPE ${MAV_TYPE}

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -5,15 +5,11 @@
 
 . ${R}etc/init.d/rc.uuv_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	#Set data link loss failsafe mode (0: disabled)
-	param set NAV_DLL_ACT 0
+#Set data link loss failsafe mode (0: disabled)
+param set-default NAV_DLL_ACT 0
 
-	# disable circuit breaker for airspeed sensor
-	param set CBRK_AIRSPD_CHK 162128
-
-fi
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
 
 set PWM_OUT 12345678
 set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -5,54 +5,50 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set EKF2_MAG_ACCLIM 0
-	param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
 
-	param set FW_LND_AIRSPD_SC 1
-	param set FW_LND_ANG 8
-	param set FW_THR_LND_MAX 0
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
-	param set FW_L1_PERIOD 12
+param set-default FW_L1_PERIOD 12
 
-	param set FW_MAN_P_MAX 30
+param set-default FW_MAN_P_MAX 30
 
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PR_FF 0.2
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.2
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
 
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
 
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_CRUISE 0.25
 
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 30
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-
-fi
+param set-default RWTO_TKOFF 1
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1031_plane_cam

@@ -5,10 +5,8 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	# Camera trigger interface is MAVLink
-	param set TRIG_INTERFACE 3
-	# Distance trigger mode enabled
-	param set TRIG_MODE 4
-fi
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4

ROMFS/px4fmu_common/init.d-posix/airframes/1032_plane_catapult

@@ -5,8 +5,5 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	param set RWTO_TKOFF 0
+param set-default RWTO_TKOFF 0
 
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1033_plane_lidar

@@ -5,8 +5,5 @@
 
 . ${R}etc/init.d-posix/airframes/1030_plane
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_LND_USETER 1
+param set-default FW_LND_USETER 1
 
-fi

ROMFS/px4fmu_common/init.d-posix/airframes/1033_rascal

@@ -5,54 +5,55 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	#param set FW_THR_SLEW_MAX 0.3 # fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	#param set RWTO_MAX_THR 0.6		# fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
+param set-default RWTO_TKOFF 1
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set-default RWTO_MAX_THR 0.6
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
-fi
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1034_rascal-electric

@@ -5,54 +5,54 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	#param set FW_THR_SLEW_MAX 0.3 # fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	#param set RWTO_MAX_THR 0.6		# fix takeoff failure for JSBsim in autonomous mission mode.
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
+param set-default RWTO_TKOFF 1
 
-fi
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set FW_THR_SLEW_MAX 0.3
+
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+
+# fix takeoff failure for JSBsim in autonomous mission mode.
+#param set RWTO_MAX_THR 0.6
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1035_techpod

@@ -5,43 +5,39 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set EKF2_MAG_ACCLIM 0
-	param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
 
-	param set FW_LND_AIRSPD_SC 1
-	param set FW_LND_ANG 8
-	param set FW_THR_LND_MAX 0
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
 
-	param set FW_L1_PERIOD 15
+param set-default FW_L1_PERIOD 15
 
-	param set FW_P_TC 0.5
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.5
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.7
-	param set FW_RR_FF 0.20
-	param set FW_RR_I 0.02
-	param set FW_RR_P 0.22
+param set-default FW_R_TC 0.7
+param set-default FW_RR_FF 0.20
+param set-default FW_RR_I 0.02
+param set-default FW_RR_P 0.22
 
-	param set FW_L1_PERIOD 12
+param set-default FW_L1_PERIOD 12
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 30
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-
-fi
+param set-default RWTO_TKOFF 1
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1036_malolo

@@ -5,52 +5,46 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	#param set EKF2_MAG_ACCLIM 0
-	#param set EKF2_MAG_YAWLIM 0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
 
-	param set FW_LND_AIRSPD_SC 1.1
-	param set FW_LND_ANG 5
-	param set FW_THR_LND_MAX 0
-	param set FW_LND_HHDIST 30
-	param set FW_LND_FL_PMIN 9.5
-	param set FW_LND_FL_PMAX 20
-	param set FW_LND_FLALT 5
-	param set FW_LND_TLALT 15
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_THR_LND_MAX 0
+param set-default FW_LND_HHDIST 30
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+param set-default FW_LND_TLALT 15
 
-	param set FW_L1_PERIOD 25
+param set-default FW_L1_PERIOD 25
 
-	param set FW_P_TC 0.4
-	param set FW_PR_FF 0.40
-	param set FW_PR_I 0.05
-	param set FW_PR_P 0.05
+param set-default FW_P_TC 0.4
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
 
-	param set FW_R_TC 0.45
-	param set FW_RR_FF 0.40
-	param set FW_RR_I 0.132
-	param set FW_RR_P 0.085
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
 
-	param set FW_W_EN 1
+param set-default FW_W_EN 1
 
-	param set MIS_LTRMIN_ALT 30
-	param set MIS_TAKEOFF_ALT 20
-	param set MIS_DIST_1WP 2500
-	param set MIS_DIST_WPS 10000
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
 
-	param set NAV_ACC_RAD 15
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 50
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 50
 
-	param set RWTO_TKOFF 1
-	param set RWTO_MAX_PITCH 20
-	param set RWTO_MAX_ROLL 10
-	param set RWTO_PSP 8
-	param set RWTO_AIRSPD_SCL 1.8
-
-fi
+param set-default RWTO_TKOFF 1
+param set-default RWTO_MAX_PITCH 20
+param set-default RWTO_MAX_ROLL 10
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
 
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -7,50 +7,46 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.25
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
-	param set MC_YAW_P 1.6
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_FWD_THRUST_EN 4
-	param set VT_F_TRANS_THR 0.75
-	param set VT_MOT_ID 1234
-	param set VT_FW_MOT_OFFID 1234
-	param set VT_B_TRANS_DUR 8
-	param set VT_TYPE 2
-
-fi
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
 
 set MAV_TYPE 22
 

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -7,44 +7,40 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_I 0.2
-	param set FW_PR_P 0.3
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.33
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_I 0.2
+param set-default FW_PR_P 0.3
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.33
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
+param set-default MC_ROLLRATE_P 0.3
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_F_TRANS_DUR 1.5
-	param set VT_F_TRANS_THR 0.7
-	param set VT_TYPE 0
+param set-default VT_F_TRANS_DUR 1.5
+param set-default VT_F_TRANS_THR 0.7
+param set-default VT_TYPE 0
 
-	param set WV_EN 0
-
-fi
+param set-default WV_EN 0
 
 set MAV_TYPE 20
 

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -7,48 +7,44 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.38
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.38
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_YAW_P 1.6
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_B_TRANS_DUR 8
-	param set VT_FWD_THRUST_EN 4
-	param set VT_MOT_ID 1234
-	param set VT_TILT_TRANS 0.6
-	param set VT_TYPE 1
-
-fi
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_MOT_ID 1234
+param set-default VT_TILT_TRANS 0.6
+param set-default VT_TYPE 1
 
 set MAV_TYPE 21
 

ROMFS/px4fmu_common/init.d-posix/airframes/1043_standard_vtol_drop

@@ -7,53 +7,50 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set FW_L1_PERIOD 12
-	param set FW_MAN_P_MAX 30
-	param set FW_PR_FF 0.2
-	param set FW_PR_I 0.4
-	param set FW_PR_P 0.9
-	param set FW_PSP_OFF 2
-	param set FW_P_LIM_MAX 32
-	param set FW_P_LIM_MIN -15
-	param set FW_RR_FF 0.1
-	param set FW_RR_P 0.3
-	param set FW_THR_CRUISE 0.25
-	param set FW_THR_MAX 0.6
-	param set FW_THR_MIN 0.05
-	param set FW_T_ALT_TC 2
-	param set FW_T_CLMB_MAX 8
-	param set FW_T_HRATE_FF 0.5
-	param set FW_T_SINK_MAX 2.7
-	param set FW_T_SINK_MIN 2.2
-	param set FW_T_TAS_TC 2
+param set-default FW_L1_PERIOD 12
+param set-default FW_MAN_P_MAX 30
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_I 0.4
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_CRUISE 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_ALT_TC 2
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2
 
-	param set MC_ROLLRATE_P 0.3
-	param set MC_YAW_P 1.6
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
 
-	param set MIS_TAKEOFF_ALT 10
+param set-default MIS_TAKEOFF_ALT 10
 
-	param set MPC_ACC_HOR_MAX 2
-	param set MPC_XY_P 0.8
-	param set MPC_XY_VEL_P_ACC 3
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_D_ACC 0.1
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
 
-	param set NAV_ACC_RAD 5
-	param set NAV_LOITER_RAD 80
+param set-default NAV_ACC_RAD 5
+param set-default NAV_LOITER_RAD 80
 
-	param set VT_FWD_THRUST_EN 4
-	param set VT_F_TRANS_THR 0.75
-	param set VT_MOT_ID 1234
-	param set VT_FW_MOT_OFFID 1234
-	param set VT_B_TRANS_DUR 8
-	param set VT_TYPE 2
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
 
-	param set RC_MAP_AUX1 8
-	param set RC_MAP_AUX2 9
-	param set RC_MAP_AUX3 10
-fi
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
 
 set MAV_TYPE 22
 

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -5,32 +5,28 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_L1_PERIOD 10
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 0.001
-	param set GND_SPEED_I 3
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 4
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_L1_PERIOD 10
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_I 3
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -6,31 +6,27 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 3
-	param set GND_SPEED_I 0.001
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 4
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 4
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1062_tf-r1

@@ -10,32 +10,28 @@
 
 . ${R}etc/init.d/rc.rover_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 3
-	param set GND_SPEED_I 0.001
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 0.25
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 15
-	param set GND_SPEED_MAX 25
-	param set GND_THR_CRUISE 0.3
-	param set GND_THR_MAX 0.5
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 3
+param set-default GND_SPEED_I 0.001
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 0.25
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 15
+param set-default GND_SPEED_MAX 25
+param set-default GND_THR_CRUISE 0.3
+param set-default GND_THR_MAX 0.5
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 3.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 3.0
 
 set MAV_TYPE 10
 

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -5,32 +5,28 @@
 
 . ${R}etc/init.d/rc.boat_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set GND_L1_DIST 5
-	param set GND_L1_PERIOD 100
-	param set GND_SP_CTRL_MODE 1
-	param set GND_SPEED_D 0.001
-	param set GND_SPEED_I 8
-	param set GND_SPEED_IMAX 0.125
-	param set GND_SPEED_P 2
-	param set GND_SPEED_THR_SC 1
-	param set GND_SPEED_TRIM 1
-	param set GND_THR_CRUISE 0.85
-	param set GND_THR_MAX 1
-	param set GND_THR_MIN 0
+param set-default GND_L1_DIST 5
+param set-default GND_L1_PERIOD 100
+param set-default GND_SP_CTRL_MODE 1
+param set-default GND_SPEED_D 0.001
+param set-default GND_SPEED_I 8
+param set-default GND_SPEED_IMAX 0.125
+param set-default GND_SPEED_P 2
+param set-default GND_SPEED_THR_SC 1
+param set-default GND_SPEED_TRIM 1
+param set-default GND_THR_CRUISE 0.85
+param set-default GND_THR_MAX 1
+param set-default GND_THR_MIN 0
 
-	param set MIS_LTRMIN_ALT 0.01
-	param set MIS_TAKEOFF_ALT 0.01
-	param set NAV_ACC_RAD 0.5
-	param set NAV_LOITER_RAD 2
+param set-default MIS_LTRMIN_ALT 0.01
+param set-default MIS_TAKEOFF_ALT 0.01
+param set-default NAV_ACC_RAD 0.5
+param set-default NAV_LOITER_RAD 2
 
-	param set CBRK_AIRSPD_CHK 162128
+param set-default CBRK_AIRSPD_CHK 162128
 
-	param set GND_MAX_ANG 0.6
-	param set GND_WHEEL_BASE 2.0
-
-fi
+param set-default GND_MAX_ANG 0.6
+param set-default GND_WHEEL_BASE 2.0
 
 set MAV_TYPE 11
 

ROMFS/px4fmu_common/init.d-posix/airframes/17001_tf-g1

@@ -12,52 +12,47 @@
 
 . ${R}etc/init.d/rc.fw_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set EKF2_ARSP_THR 8
-	param set EKF2_FUSE_BETA 1
-	param set ASPD_STALL 10.0
+param set-default EKF2_ARSP_THR 8
+param set-default EKF2_FUSE_BETA 1
+param set-default ASPD_STALL 10.0
 
-	param set FW_P_RMAX_NEG 20.0
-	param set FW_P_RMAX_POS 60.0
-	param set FW_W_RMAX 10
-	param set FW_W_EN 1
+param set-default FW_P_RMAX_NEG 20.0
+param set-default FW_P_RMAX_POS 60.0
+param set-default FW_W_RMAX 10
+param set-default FW_W_EN 1
 
-	param set FW_PR_IMAX 0.4
-	param set FW_R_TC 0.4
-	param set FW_RR_FF 0.5
-	param set FW_RR_I 0.1
-	param set FW_RR_IMAX 0.2
-	param set FW_RR_P 0.08
+param set-default FW_PR_IMAX 0.4
+param set-default FW_R_TC 0.4
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_I 0.1
+param set-default FW_RR_IMAX 0.2
+param set-default FW_RR_P 0.08
 
-	param set MIS_LTRMIN_ALT 50
-	param set MIS_TAKEOFF_ALT 3
+param set-default MIS_LTRMIN_ALT 50
+param set-default MIS_TAKEOFF_ALT 3
 
-	param set NAV_ACC_RAD 20
-	param set NAV_DLL_ACT 2
-	param set NAV_LOITER_RAD 100
+param set-default NAV_ACC_RAD 20
+param set-default NAV_DLL_ACT 2
+param set-default NAV_LOITER_RAD 100
 
-	param set RWTO_TKOFF 1
+param set-default RWTO_TKOFF 1
 
-	param set FW_ARSP_SCALE_EN 0
+param set-default FW_ARSP_SCALE_EN 0
 
-	param set FW_AIRSPD_MAX 35
-	param set FW_AIRSPD_MIN 7
-	param set FW_AIRSPD_TRIM 15
+param set-default FW_AIRSPD_MAX 35
+param set-default FW_AIRSPD_MIN 7
+param set-default FW_AIRSPD_TRIM 15
 
-	param set FW_P_LIM_MAX 25
-	param set FW_P_LIM_MIN -5
-	param set FW_R_LIM 30
+param set-default FW_P_LIM_MAX 25
+param set-default FW_P_LIM_MIN -5
+param set-default FW_R_LIM 30
 
-	param set FW_MAN_P_MAX 30.0
-	param set FW_MAN_R_MAX 30.0
-
-	param set FW_THR_CRUISE 0.8
-	param set FW_THR_IDLE 0
-	param set COM_DISARM_PRFLT 0
-
-fi
+param set-default FW_MAN_P_MAX 30.0
+param set-default FW_MAN_R_MAX 30.0
 
+param set-default FW_THR_CRUISE 0.8
+param set-default FW_THR_IDLE 0
+param set-default COM_DISARM_PRFLT 0
 
 set MIXER_FILE etc/mixers-sitl/autogyro_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/3011_hexarotor_x

@@ -9,24 +9,21 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.1
-	param set MC_PITCHRATE_I 0.05
-	param set MC_PITCH_P 6.0
-	param set MC_ROLLRATE_P 0.15
-	param set MC_ROLLRATE_I 0.1
-	param set MC_ROLL_P 6.0
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCH_P 6.0
+param set-default MC_ROLLRATE_P 0.15
+param set-default MC_ROLLRATE_I 0.1
+param set-default MC_ROLL_P 6.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
+param set-default RTL_DESCEND_ALT 10
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_DO_STAB 2
-fi
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_DO_STAB 2
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/airframes/6011_typhoon_h480

@@ -7,27 +7,24 @@
 
 . ${R}etc/init.d/rc.mc_defaults
 
-if [ $AUTOCNF = yes ]
-then
-	param set MC_PITCHRATE_P 0.0800
-	param set MC_PITCHRATE_I 0.0400
-	param set MC_PITCHRATE_D 0.0010
-	param set MC_PITCH_P 9.0
-	param set MC_ROLLRATE_P 0.0800
-	param set MC_ROLLRATE_I 0.0400
-	param set MC_ROLLRATE_D 0.0010
-	param set MC_ROLL_P 9.0
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MC_PITCHRATE_P 0.0800
+param set-default MC_PITCHRATE_I 0.0400
+param set-default MC_PITCHRATE_D 0.0010
+param set-default MC_PITCH_P 9.0
+param set-default MC_ROLLRATE_P 0.0800
+param set-default MC_ROLLRATE_I 0.0400
+param set-default MC_ROLLRATE_D 0.0010
+param set-default MC_ROLL_P 9.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
+param set-default RTL_DESCEND_ALT 10
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 4
-	param set MNT_MODE_OUT 2
-	param set MAV_PROTO_VER 2
-fi
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
+param set-default MAV_PROTO_VER 2
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_ctrlalloc

@@ -8,66 +8,63 @@
 . ${R}etc/init.d/rc.mc_defaults
 . ${R}etc/init.d/rc.ctrlalloc
 
-if [ $AUTOCNF = yes ]
-then
-	param set MPC_XY_VEL_I_ACC 4
-	param set MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
 
-	param set RTL_DESCEND_ALT 10
-	param set RTL_LAND_DELAY 0
+param set-default RTL_DESCEND_ALT 10
+param set-default RTL_LAND_DELAY 0
 
-	param set TRIG_INTERFACE 3
-	param set TRIG_MODE 4
-	param set MNT_MODE_IN 0
-	param set MAV_PROTO_VER 2
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 0
+param set-default MAV_PROTO_VER 2
 
-	param set MPC_USE_HTE 0
+param set-default MPC_USE_HTE 0
 
-	param set VM_MASS 2.66
-	param set VM_INERTIA_XX 0.06
-	param set VM_INERTIA_YY 0.06
-	param set VM_INERTIA_ZZ 0.10
+param set-default VM_MASS 2.66
+param set-default VM_INERTIA_XX 0.06
+param set-default VM_INERTIA_YY 0.06
+param set-default VM_INERTIA_ZZ 0.10
 
-	param set CA_AIRFRAME 0
-	param set CA_METHOD 1
-	param set CA_ACT0_MIN 0.0
-	param set CA_ACT1_MIN 0.0
-	param set CA_ACT2_MIN 0.0
-	param set CA_ACT3_MIN 0.0
-	param set CA_ACT4_MIN 0.0
-	param set CA_ACT5_MIN 0.0
-	param set CA_ACT0_MAX 1.0
-	param set CA_ACT1_MAX 1.0
-	param set CA_ACT2_MAX 1.0
-	param set CA_ACT3_MAX 1.0
-	param set CA_ACT4_MAX 1.0
-	param set CA_ACT5_MAX 1.0
+param set-default CA_AIRFRAME 0
+param set-default CA_METHOD 1
+param set-default CA_ACT0_MIN 0.0
+param set-default CA_ACT1_MIN 0.0
+param set-default CA_ACT2_MIN 0.0
+param set-default CA_ACT3_MIN 0.0
+param set-default CA_ACT4_MIN 0.0
+param set-default CA_ACT5_MIN 0.0
+param set-default CA_ACT0_MAX 1.0
+param set-default CA_ACT1_MAX 1.0
+param set-default CA_ACT2_MAX 1.0
+param set-default CA_ACT3_MAX 1.0
+param set-default CA_ACT4_MAX 1.0
+param set-default CA_ACT5_MAX 1.0
 
-	param set CA_MC_R0_PX 0.0
-	param set CA_MC_R0_PY 1.0
-	param set CA_MC_R0_CT 9.5
-	param set CA_MC_R0_KM -0.05
-	param set CA_MC_R1_PX 0.0
-	param set CA_MC_R1_PY -1.0
-	param set CA_MC_R1_CT 9.5
-	param set CA_MC_R1_KM 0.05
-	param set CA_MC_R2_PX 0.866025
-	param set CA_MC_R2_PY -0.5
-	param set CA_MC_R2_CT 9.5
-	param set CA_MC_R2_KM -0.05
-	param set CA_MC_R3_PX -0.866025
-	param set CA_MC_R3_PY 0.5
-	param set CA_MC_R3_CT 9.5
-	param set CA_MC_R3_KM 0.05
-	param set CA_MC_R4_PX 0.866025
-	param set CA_MC_R4_PY 0.5
-	param set CA_MC_R4_CT 9.5
-	param set CA_MC_R4_KM 0.05
-	param set CA_MC_R5_PX -0.866025
-	param set CA_MC_R5_PY -0.5
-	param set CA_MC_R5_CT 9.5
-	param set CA_MC_R5_KM -0.05
-fi
+param set-default CA_MC_R0_PX 0.0
+param set-default CA_MC_R0_PY 1.0
+param set-default CA_MC_R0_CT 9.5
+param set-default CA_MC_R0_KM -0.05
+param set-default CA_MC_R1_PX 0.0
+param set-default CA_MC_R1_PY -1.0
+param set-default CA_MC_R1_CT 9.5
+param set-default CA_MC_R1_KM 0.05
+param set-default CA_MC_R2_PX 0.866025
+param set-default CA_MC_R2_PY -0.5
+param set-default CA_MC_R2_CT 9.5
+param set-default CA_MC_R2_KM -0.05
+param set-default CA_MC_R3_PX -0.866025
+param set-default CA_MC_R3_PY 0.5
+param set-default CA_MC_R3_CT 9.5
+param set-default CA_MC_R3_KM 0.05
+param set-default CA_MC_R4_PX 0.866025
+param set-default CA_MC_R4_PY 0.5
+param set-default CA_MC_R4_CT 9.5
+param set-default CA_MC_R4_KM 0.05
+param set-default CA_MC_R5_PX -0.866025
+param set-default CA_MC_R5_PY -0.5
+param set-default CA_MC_R5_CT 9.5
+param set-default CA_MC_R5_KM -0.05
 
 set MAV_TYPE 13
 

ROMFS/px4fmu_common/init.d-posix/rcS

@@ -98,7 +98,7 @@ then
 	set AUTOCNF yes
 
 	# Wipe out params except RC*, flight modes, total flight time, accel cal, gyro cal, next flight UUID
-	param reset_all SYS_AUTOSTART SYS_AUTOCONFIG RC* COM_FLTMODE* LND_FLIGHT_T_* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT_UUID
+	param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 fi
 
 # multi-instance setup
@@ -177,6 +177,10 @@ if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
 	COM_OF_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 0.5" | bc)
 	echo "COM_OF_LOSS_T set to $COM_OF_LOSS_T_LONGER"
 	param set COM_OF_LOSS_T $COM_OF_LOSS_T_LONGER
+
+	COM_OBC_LOSS_T_LONGER=$(echo "$PX4_SIM_SPEED_FACTOR * 5.0" | bc)
+	echo "COM_OBC_LOSS_T set to $COM_OBC_LOSS_T_LONGER"
+	param set COM_OBC_LOSS_T $COM_OBC_LOSS_T_LONGER
 fi
 
 # Autostart ID
@@ -216,7 +220,21 @@ dataman start
 # only start the simulator if not in replay mode, as both control the lockstep time
 if ! replay tryapplyparams
 then
-	simulator start -c $simulator_tcp_port
+  # Check if PX4_SIM_HOSTNAME environment variable is empty
+  # If empty check if PX4_SIM_HOST_ADDR environment variable is empty
+  # If both are empty use localhost for simulator
+  if [ -z "${PX4_SIM_HOSTNAME}" ]; then
+    if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
+      echo "PX4 SIM HOST: localhost"
+      simulator start -c $simulator_tcp_port
+    else
+      echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
+      simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port 
+    fi
+  else
+    echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
+    simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port 
+  fi
 fi
 load_mon start
 battery_simulator start
@@ -257,7 +275,7 @@ fi
 if [ -e etc/init.d-posix/rc.mavlink_override ]
 then
 	echo "Running non-default mavlink config rc.mavlink_override"
-	sh etc/init.d-posix/rc.mavlink_override
+	. ${R}etc/init.d-posix/rc.mavlink_override
 else
 	# GCS link
 	mavlink start -x -u $udp_gcs_port_local -r 4000000 -f

ROMFS/px4fmu_common/init.d/airframes/13010_claire

@@ -14,7 +14,7 @@
 . ${R}etc/init.d/rc.vtol_defaults
 
 
-param set-default PWM_AUX_DISARMED 1000
+param set-default PWM_AUX_DISARM 1000
 param set-default PWM_AUX_MAX 2000
 param set-default PWM_AUX_MIN 1000
 param set-default PWM_AUX_RATE 50

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -112,7 +112,7 @@ param set-default MPC_YAWRAUTO_MAX 20
 param set-default NAV_DLL_ACT 0
 param set-default NAV_LOITER_RAD 100
 
-param set-default PWM_AUX_DISARMED 950
+param set-default PWM_AUX_DISARM 950
 
 param set-default PWM_MAIN_DIS5 1500
 param set-default PWM_MAIN_DIS6 1500

ROMFS/px4fmu_common/init.d/airframes/13014_vtol_babyshark

@@ -111,5 +111,6 @@ set MAV_TYPE 22
 set MIXER babyshark
 set MIXER_AUX pass
 
+# Mark outputs for the alternate rate
+# or D-Shot
 set PWM_OUT 5678
-set PWM_AUX_OUT 1234

ROMFS/px4fmu_common/init.d/airframes/24001_dodeca_cox

@@ -31,7 +31,7 @@ set VEHICLE_TYPE mc
 param set-default NAV_ACC_RAD 2
 
 param set-default PWM_AUX_RATE 400
-param set-default PWM_AUX_DISARMED 900
+param set-default PWM_AUX_DISARM 900
 param set-default PWM_AUX_MIN 1075
 param set-default PWM_AUX_MAX 1950
 

ROMFS/px4fmu_common/init.d/airframes/4040_reaper

@@ -33,7 +33,7 @@ param set-default MC_YAW_P 4
 
 param set-default NAV_ACC_RAD 2
 
-param set-default PWM_AUX_DISARMED 950
+param set-default PWM_AUX_DISARM 950
 param set-default PWM_AUX_RATE 50
 param set-default PWM_MAIN_MIN 1100
 param set-default PWM_MAIN_MAX 1900

ROMFS/px4fmu_common/init.d/airframes/4053_holybro_kopis2

@@ -16,8 +16,6 @@
 set MIXER quad_x
 set PWM_OUT 1234
 
-set PARAM_DEFAULTS_VER 2
-
 
 param set-default BAT_N_CELLS 4
 

ROMFS/px4fmu_common/init.d/airframes/50003_aion_robotics_r1_rover

@@ -7,8 +7,6 @@
 # @type Rover
 # @class Rover
 #
-# @board px4_fmu-v2 exclude
-#
 # @output MAIN0 Speed of left wheels
 # @output MAIN1 Speed of right wheels
 #

ROMFS/px4fmu_common/init.d/rc.interface

@@ -144,6 +144,11 @@ then
 		set OUTPUT_DEV /dev/uavcan/esc
 	fi
 
+	if [ $OUTPUT_MODE = vesc ]
+	then
+		set OUTPUT_DEV /dev/vesc
+	fi
+
 	if mixer load ${OUTPUT_DEV} ${MIXER_FILE}
 	then
 		echo "INFO  [init] Mixer: ${MIXER_FILE} on ${OUTPUT_DEV}"

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -108,11 +108,18 @@ then
 	vl53l1x start -X
 fi
 
+# ADIS16448 spi external IMU
+if param compare -s SENS_EN_ADIS164X 1
+then
+	adis16448 -S start
+fi
+
 # probe for optional external I2C devices
 if param compare SENS_EXT_I2C_PRB 1
 then
+	icm20948_i2c_passthrough -X -q start
+
 	# compasses
-	ak09916 -X -R 6 -q start # external AK09916 (Here2) is rotated 270 degrees yaw
 	hmc5883 -T -X -q start
 	ist8308 -X -q start
 	ist8310 -X -q start
@@ -121,6 +128,9 @@ then
 	qmc5883l -X -q start
 	rm3100 -X -q start
 
+	# start last (wait for possible icm20948 passthrough mode)
+	ak09916 -X -q start
+
 	# differential pressure sensors
 	if [ ${VEHICLE_TYPE} = fw -o ${VEHICLE_TYPE} = vtol ]
 	then

ROMFS/px4fmu_common/init.d/rcS

@@ -51,12 +51,6 @@ set STARTUP_TUNE 1
 set USE_IO no
 set VEHICLE_TYPE none
 
-# Airframe parameter versioning: airframe maintainers can set this in the
-# airframe startup script, and then increase it by one whenever an airframe
-# parameter is updated - it will ensure that these parameters will be updated
-# when the firmware is flashed.
-set PARAM_DEFAULTS_VER 1
-
 #
 # Mount the procfs.
 #
@@ -171,12 +165,8 @@ else
 	#
 	if param greater SYS_AUTOCONFIG 0
 	then
-		if param compare SYS_AUTOCONFIG 1
-		then
-			# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
-			param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT* SYS_PARAM_VER
-		fi
-
+		# Wipe out params except RC*, flight modes, total flight time, calibration parameters, next flight UUID
+		param reset_all SYS_AUTO* RC* COM_FLTMODE* LND_FLIGHT* TC_* CAL_ACC* CAL_GYRO* COM_FLIGHT*
 		set AUTOCNF yes
 	fi
 
@@ -239,14 +229,6 @@ else
 	rgbled start -X -q
 	rgbled_ncp5623c start -X -q
 
-	if param greater -s LIGHT_EN_BLINKM 0
-	then
-		if blinkm start -X
-		then
-			blinkm systemstate
-		fi
-	fi
-
 	#
 	# Set parameters and env variables for selected AUTOSTART.
 	#
@@ -272,6 +254,39 @@ else
 		param set SYS_AUTOCONFIG 0
 	fi
 
+	#
+	# Check if UAVCAN is enabled, default to it for ESCs.
+	#
+	if param greater -s UAVCAN_ENABLE 0
+	then
+		# Start core UAVCAN module.
+		if uavcan start
+		then
+			if param greater UAVCAN_ENABLE 1
+			then
+				# Start UAVCAN firmware update server and dynamic node ID allocation server.
+				uavcan start fw
+				tune_control play -t 1
+				if param greater UAVCAN_ENABLE 2
+				then
+					set OUTPUT_MODE uavcan_esc
+				fi
+			fi
+		else
+			tune_control play error
+		fi
+	else
+		if param greater -s UAVCAN_V1_ENABLE 0
+		then
+			uavcan_v1 start
+		fi
+	fi
+
+	if param greater -s VESC_PORT 0
+	then
+		set OUTPUT_MODE vesc
+	fi
+
 	#
 	# Check if PX4IO present and update firmware if needed.
 	# Assumption IOFW set to firmware file and IO_PRESENT = no
@@ -303,6 +318,8 @@ else
 					else
 						tune_control play -t 18 # tune 18 = PROG_PX4IO_ERR
 					fi
+				else
+					tune_control stop
 				fi
 			fi
 		fi
@@ -414,34 +431,6 @@ else
 		camera_feedback start
 	fi
 
-	#
-	# Check if UAVCAN is enabled, default to it for ESCs.
-	#
-	if param greater -s UAVCAN_ENABLE 0
-	then
-		# Start core UAVCAN module.
-		if uavcan start
-		then
-			if param greater UAVCAN_ENABLE 1
-			then
-				# Start UAVCAN firmware update server and dynamic node ID allocation server.
-				uavcan start fw
-				tune_control play -t 1
-				if param greater UAVCAN_ENABLE 2
-				then
-					set OUTPUT_MODE uavcan_esc
-				fi
-			fi
-		else
-			tune_control play error
-		fi
-	fi
-
-	if param greater -s UAVCAN_V1_ENABLE 0
-	then
-		uavcan_v1 start
-	fi
-
 	#
 	# Optional board mavlink streams: rc.board_mavlink
 	#
@@ -570,15 +559,6 @@ else
 		fi
 	fi
 
-	if ! param compare SYS_PARAM_VER ${PARAM_DEFAULTS_VER}
-	then
-		echo "Switched to different parameter version. Resetting parameters."
-		param set SYS_PARAM_VER ${PARAM_DEFAULTS_VER}
-		param set SYS_AUTOCONFIG 2
-		param save
-		reboot
-	fi
-
 #
 # End of autostart.
 #
@@ -603,7 +583,6 @@ unset MIXER
 unset MIXER_AUX
 unset MIXER_FILE
 unset OUTPUT_MODE
-unset PARAM_DEFAULTS_VER
 unset PARAM_FILE
 unset PWM_AUX_OUT
 unset PWM_AUX_RATE

Tools/serial/generate_config.py

@@ -190,7 +190,6 @@ if rc_serial_output_dir is None and serial_params_output_file is None:
 serial_commands = []
 ethernet_configuration = []
 additional_params = ""
-additional_ethernet_params = ""
 
 if ethernet_supported:
     ethernet_configuration.append({
@@ -211,7 +210,7 @@ def parse_yaml_serial_config(yaml_config):
         ret.append(serial_config)
     return ret
 
-def parse_yaml_parameters_config(yaml_config):
+def parse_yaml_parameters_config(yaml_config, ethernet_supported):
     """ parse the parameters section from the yaml config file """
     if 'parameters' not in yaml_config:
         return ''
@@ -224,79 +223,7 @@ def parse_yaml_parameters_config(yaml_config):
         param_group = parameters_section.get('group', None)
         for param_name in definitions:
             param = definitions[param_name]
-            if 'ethernet' in param:
-                continue
-            num_instances = param.get('num_instances', 1)
-            instance_start = param.get('instance_start', 0) # offset
-
-            # get the type and extract all tags
-            tags = '@group {:}'.format(param_group)
-            if param['type'] == 'enum':
-                param_type = 'INT32'
-                for key in param['values']:
-                    tags += '\n * @value {:} {:}'.format(key, param['values'][key])
-            elif param['type'] == 'boolean':
-                param_type = 'INT32'
-                tags += '\n * @boolean'
-            elif param['type'] == 'int32':
-                param_type = 'INT32'
-            elif param['type'] == 'float':
-                param_type = 'FLOAT'
-            else:
-                raise Exception("unknown param type {:}".format(param['type']))
-
-            for tag in ['decimal', 'increment', 'category', 'volatile', 'bit',
-                        'min', 'max', 'unit', 'reboot_required']:
-                if tag in param:
-                    tags += '\n * @{:} {:}'.format(tag, param[tag])
-
-            for i in range(num_instances):
-                # default value
-                default_value = 0
-                if 'default' in param:
-                    # default can be a list of num_instances or a single value
-                    if type(param['default']) == list:
-                        assert len(param['default']) == num_instances
-                        default_value = param['default'][i]
-                    else:
-                        default_value = param['default']
-
-                if type(default_value) == bool:
-                    default_value = int(default_value)
-
-                # output the existing C-style format
-                ret += '''
-/**
- * {short_descr}
- *
- * {long_descr}
- *
- * {tags}
- */
-PARAM_DEFINE_{param_type}({name}, {default_value});
-'''.format(short_descr=param['description']['short'].replace("\n", "\n * "),
-           long_descr=param['description']['long'].replace("\n", "\n * "),
-           tags=tags,
-           param_type=param_type,
-           name=param_name,
-           default_value=default_value,
-          ).replace('${i}', str(i+instance_start))
-    return ret
-
-def parse_yaml_ethernet_parameters_config(yaml_config):
-    """ parse the parameters section from the yaml config file """
-    if 'parameters' not in yaml_config:
-        return ''
-    parameters_section_list = yaml_config['parameters']
-    for parameters_section in parameters_section_list:
-        if 'definitions' not in parameters_section:
-            return ''
-        definitions = parameters_section['definitions']
-        ret = ''
-        param_group = parameters_section.get('group', None)
-        for param_name in definitions:
-            param = definitions[param_name]
-            if 'ethernet' not in param:
+            if param.get('requires_ethernet', False) and not ethernet_supported:
                 continue
             num_instances = param.get('num_instances', 1)
             instance_start = param.get('instance_start', 0) # offset
@@ -362,9 +289,8 @@ for yaml_file in args.config_files:
             serial_commands.extend(parse_yaml_serial_config(yaml_config))
 
             # TODO: additional params should be parsed in a separate script
-            additional_params += parse_yaml_parameters_config(yaml_config)
-            if ethernet_supported:
-                additional_ethernet_params += parse_yaml_ethernet_parameters_config(yaml_config)
+            additional_params += parse_yaml_parameters_config(
+                yaml_config, ethernet_supported)
 
         except yaml.YAMLError as exc:
             print(exc)
@@ -429,7 +355,7 @@ for serial_command in serial_commands:
             'default_port': default_port,
             'param_group': port_config['group'],
             'description_extended': port_config.get('description_extended', ''),
-			'ethernet_config': serial_command.get('ethernet', 'none')
+			'supports_networking': serial_command.get('supports_networking', False)
             })
 
 if verbose:
@@ -473,6 +399,5 @@ if serial_params_output_file is not None:
         fid.write(template.render(serial_devices=serial_devices,
             ethernet_configuration=ethernet_configuration,
             commands=commands, serial_ports=serial_ports,
-            additional_definitions=additional_params,
-            additional_ethernet_definitions=additional_ethernet_params))
+            additional_definitions=additional_params))
 

Tools/serial/rc.serial_port.jinja

@@ -17,9 +17,9 @@ if param compare "$PRT" {{ serial_device.index }}; then
 fi
 
 {% endfor %}
+
 {% for config in ethernet_configuration -%}
 if param compare "$PRT" {{ config.index }}; then
 	set SERIAL_DEV ethernet
 fi
-
 {% endfor %}

Tools/serial/serial_params.c.jinja

@@ -58,10 +58,11 @@ PARAM_DEFINE_INT32(SER_{{ serial_device.tag }}_BAUD, {{ serial_device.default_ba
 {%- for serial_device in serial_devices %}
  * @value {{ serial_device.index }} {{ serial_device.label }}
 {%- endfor %}
-{%- if command.ethernet_config != "none" %}
+{%- if command.supports_networking %}
 {%- for config in ethernet_configuration %}
  * @value {{ config.index }} {{ config.label }}
-{%- endfor %}{% endif %}
+{%- endfor %}
+{%- endif %}
  * @group {{ command.param_group }}
  * @reboot_required true
  */
@@ -72,5 +73,3 @@ PARAM_DEFINE_INT32({{ command.port_param_name }}, {{ command.default_port }});
 
 {{ additional_definitions }}
 
-{{ additional_ethernet_definitions }}
-

Tools/uorb_graph/create.py

@@ -44,7 +44,7 @@ parser.add_argument('-m', '--modules', action='store',
                     default='')
 
 
-logging.basicConfig(level=logging.WARNING)
+logging.basicConfig(level=logging.WARNING,format='%(message)s')
 log = logging.getLogger()
 
 def get_N_colors(N, s=0.8, v=0.9):
@@ -61,6 +61,9 @@ class PubSub(object):
     """ Collects either publication or subscription information for nodes
     (modules and topics) & edges """
 
+    # special value to signal an ambiguous was found -- don't record this topic, and stop processing.
+    AMBIGUOUS_SITE_TOPIC = "AMBIGUOUS"
+
     def __init__(self, name, topic_blacklist, regexes):
         """
             :param is_publication: if True, publications, False for
@@ -74,13 +77,12 @@ class PubSub(object):
         self._topic_blacklist = topic_blacklist
         self._regexes = set([ re.compile(regex) for regex in regexes])
 
-    def match(self, source_line: str) -> Set[str]:
+    def match(self, source_line: str) -> str:
         """ Extract subscribed/published topics from a source string
         :param src_str: string of C/C++ code with comments and whitespace removed
-        :return: if any topic was found, it is returned as a str.  Otherwise, None
+        :return: if any topic was found, returned as a str.   On error, raise on exception.  On ambiguous line, return `AMBIGUOUS_SITE_TOPIC`.  Otherwise, return `None`
         """
 
-        matches = set()
         for regex in self._regexes:
             # just the matches for this particular pattern:
             match = regex.search(source_line)
@@ -88,11 +90,10 @@ class PubSub(object):
             if match is None:
                 continue
 
-            # all regexes should contain 2 capture groups
-            # total_match = match.group(0)
+            # # all regexes should contain 2 capture groups  (or else this code block crashes)
             route_group, topic_group = match.groups()
 
-            log.debug(f"          ####:{self._name}:  {route_group}, {topic_group}")
+            log.debug("          ####:{}:  {}, {}".format( self._name, route_group, topic_group))
 
             # # TODO: handle this case... but not sure where, yet
             # if match == 'ORB_ID_VEHICLE_ATTITUDE_CONTROLS': # special case
@@ -102,49 +103,31 @@ class PubSub(object):
             if route_group:
                 if route_group == 'ORB_ID':
                     log.debug("            >>> Found ORB_ID topic: " + topic_group +  "    w/regex: " + str(regex.pattern))
-                    self._add_topic(matches, topic_group)
-                    break
-                elif route_group == '<' and topic_group.endswith('_s'):
-                    topic_group = topic_group[:-2]
-                    log.debug("            >>> Found C++ template-declaration: " + topic_group +  "    w/regex: " + str(regex.pattern))
-                    self._add_topic(matches, topic_group)
-                    # continue processing
-                elif route_group in ['{','('] and topic_group.endswith('_s'):
-                    topic_group = topic_group[:-2]
-                    log.debug("            >>> Found standard declaration: " + topic_group +  "    w/regex: " + str(regex.pattern))
-                    self._add_topic(matches, topic_group)
-                    break
+                    return self._filter_topic(topic_group)
                 elif route_group == '[':
-                    if topic_group.endswith('_s'):
-                        topic_group = topic_group[:-2]
-                        log.debug("            >>> Found array declaration: " + topic_group +  "    w/regex: " + str(regex.pattern))
-                        self._add_topic(matches, topic_group)
-                        break
-                    else:
-                        # no topic found -- ambiguity -- return an empty set
-                        return set()
-                elif 'Multi' in route_group and topic_group.endswith('_s'):
-                        topic_group = topic_group[:-2]
-                        log.debug("            >>> Found 'multi' declaration: " + topic_group +  "    w/regex: " + str(regex.pattern))
-                        self._add_topic(matches, topic_group)
-                        break
+                    if not topic_group:
+                        log.debug("            !! found an ambiguous site => return an empty set")
+                        return PubSub.AMBIGUOUS_SITE_TOPIC
                 else:
                     raise SyntaxError('!!! Encountered regex case:  `route_group` contains unrecognized value!: '+ route_group+'  (::'+str(regex.pattern)+')\n'
                                         + "        ("+ route_group+', '+topic_group +")\n"
                                         + "        " + source_line)
+            elif route_group.empty() and topic_group.empty():
+                log.debug('!!! Found ambiguous site, without `ORB_ID` or topic (::'+str(regex.pattern))
+                return PubSub.AMBIGUOUS_SITE_TOPIC
 
             else:
                 raise SyntaxError("            !!! unhandled case:  unknown-variant: "+route_group+", " + topic_group + " ....from regex: " + str(regex.pattern))
 
-        return matches
+        return None
 
-    def _add_topic(self, topic_set: Set[str], topic_name: str):
+    def _filter_topic(self, topic_name: str) -> str:
         """ add topic to set, unless the topic is ignored """
         if topic_name in self._topic_blacklist:
             log.debug("                    XX Ignoring blacklisted topic " + topic_name)
-            return
+            return None
         else:
-            return topic_set.add(topic_name)
+            return topic_name
 
 class Publications(PubSub):
     """ Collects topic publication information for scopes """
@@ -189,7 +172,7 @@ class Scope(object):
         return self._name
 
     def reduce_ambiguities(self) -> Set[str]:
-        self.ambiguities = self.ambiguities - self.subscriptions - self.ambiguities
+        self.ambiguities = self.ambiguities - self.subscriptions - self.publications
         return self.dependencies
 
     @property
@@ -225,8 +208,8 @@ class Graph(object):
             - topic_blacklist
         """
 
-        self._comment_remove_pattern = re.compile( r'//.*?$|/\*.*?\*/|\'(?:\\.|[^\\\'])*\'|"(?:\\.|[^\\"])*"', re.DOTALL | re.MULTILINE)
         self._whitespace_pattern = re.compile(r'\s+')
+
         self._scope_blacklist = set(kwargs.get('scope_blacklist',set()))
         self._scope_whitelist = set(kwargs.get('scope_whitelist',set()))
 
@@ -249,28 +232,27 @@ class Graph(object):
         self._topic_colors = {} # key = topic, value = color (html string)
 
         # note: the source-file-string is pre-processed to remove whitespace -- regexes should ignore whitespace
-        # note:  the regexes should have at least 3 capture groups '()'; otherwise they break downstream code
-        capture_cases_sub = [r"\borb_subscribe(?:_multi|)\b\s*\(\s*(ORB_ID)\s*\(\s*(\w+)",
-                             r"(?:uORB::)Subscription(?:Interval|)\s+\w+\s*[\{\(]\s*(ORB_ID)\s*\(\s*(\w+)",
-                             r"(?:uORB::)Subscription(?:Data|MultiArray|Blocking|)\s*(<)\s*(\w+)",
-                             r"(?:uORB::)SubscriptionCallbackWorkItem\s+\w+\s*\{\s*this,\s*(ORB_ID)\((\w+)",
+        # note: the regexes should 2 capture groups '()' to correctly register with downstream code
+        capture_cases_sub = [r"orb_subscribe\w*\((ORB_ID)(?:\(|::)(\w+)",
+                             r"orb_copy\((ORB_ID)(?:\(|::)(\w+)",
+                             r"Subscription\w*(?:<[^>]+>|)\w*(?:\[[^]]+\]|)[\{\(](ORB_ID)(?:\(|::)(\w+)",
+                             r"SubscriptionCallbackWorkItem\w+\{this,(ORB_ID)(?:\(|::)(\w+)",
                             ]
         self._subscriptions = Subscriptions( self._topic_blacklist, capture_cases_sub)
 
         # note: the source-file-string is pre-processed to remove whitespace -- regexes should ignore whitespace
-        # note: the regexes should have at least 3 capture groups '()'; otherwise they break downstream code
-        capture_cases_pub = [r"(?:uORB::)Publication(?:Data|Multi|)\s*(<)(\w+)>",
-                             r"orb_advertise(?:_multi|_queue|_multi_queue|)\s*\(\s*(ORB_ID)\s*\(\s*(\w+)",
-                             r"orb_publish(?:_auto|)\s*\(\s*(ORB_ID)\s*\(\s*(\w+)",
-                             r"(?:uORB::)Publication(?:Data|Multi|)\s*<\w+>\s+\w+\s*[\(\{](ORB_ID)\((\w+)"
+        # note: the regexes should 2 capture groups '()' to correctly register with downstream code
+        capture_cases_pub = [r"orb_advertise(?:_multi|_queue|_multi_queue|)\((ORB_ID)(?:\(|::)(\w+)",
+                             r"orb_publish(?:_auto|)\((ORB_ID)(?:\(|::)(\w+)",
+                             r"Publication\w*<\w+>\w+(?:\[[^]]+\]|)[\(\{]*(ORB_ID)(?:\(|::)(\w+)",
                             ]
         self._publications = Publications( self._topic_blacklist, capture_cases_pub)
 
         # note: the source-file-string is pre-processed to remove whitespace -- regexes should ignore whitespace
-        # note: the regexes should have at least 3 capture groups '()'; otherwise they break downstream code
-        capture_cases_ambiguous = [ r"orb_copy\s*\(\s*(ORB_ID)\s*\(\s*(\w+)",
-                                    r"(?:uORB::)Subscription[^\s]*\s+\w+\s*(\[)\s*\w+\s*\]()",
-                                    r"(ORB_ID)\s*\(\s*(\w+)",
+        # note: the regexes should 2 capture groups '()' to correctly register with downstream code
+        capture_cases_ambiguous = [ r"Publication\w*(?:\<\w+\>|)\w+(\[)()",
+                                    r"Subscription\w*(?:\<\w+\>|)\w+(\[)()",
+                                    r"(ORB_ID)(?:\(|::)(\w+)",
                                   ]
         self._ambiguities = Ambiguities( self._topic_blacklist, capture_cases_ambiguous)
 
@@ -279,7 +261,7 @@ class Graph(object):
             return None
         return self._current_scope[-1]
 
-    def build(self, src_path_list, path_blacklist=[], **kwargs):
+    def build(self, src_path_list, **kwargs):
         """ parse the source tree & extract pub/sub information.
             :param use_topic_pubsub_union: if true, use all topics that have a
             publisher or subscriber. If false, use only topics with at least one
@@ -288,7 +270,8 @@ class Graph(object):
             fill in self._module_subsciptions & self._module_publications
         """
 
-        self._path_blacklist = [os.path.normpath(p) for p in path_blacklist]
+
+        self._path_blacklist =  set([ os.path.normpath(p) for p in kwargs.get('path_blacklist',[]) ])
 
         for path in src_path_list:
             log.info("## Add src path: " + path )
@@ -296,9 +279,9 @@ class Graph(object):
 
         # Summarize the found counts: (all topics are defined in 'dependency' library)
         log.info('### Summary: Total Scanned:')
-        log.info('    Libraries Count:    '+str(len(self._found_libraries)))
-        log.info('    Modules Count:      '+str(len(self._found_modules)))
-        log.info('    Warnings Count:     '+str(len(self._warnings)))
+        log.info('    Library Count:      '+str(len(self._found_libraries)))
+        log.info('    Module Count:       '+str(len(self._found_modules)))
+        log.info('    Warning Count:      '+str(len(self._warnings)))
 
         if kwargs['merge_depends']:
             graph.merge_depends()
@@ -307,18 +290,21 @@ class Graph(object):
         self._generate_print_lists(use_topic_pubsub_union=kwargs['use_topic_pubsub_union'], merge_depends=kwargs['merge_depends'])
 
         # Summarize the found counts:
-        print('          ### Summary (in-scope):')
-        print('              Ambiguous Count:    '+str(len(self._print_ambiguities)))
-        print('              Scope Count:        '+str(len(self._print_scopes)))
-        print('              Topics Count:       '+str(len(self._print_topics)))
-        print('              Warnings Count:     '+str(len(self._warnings)))
+        log.info('### Summary (in-scope):')
+        log.info('    Scope Count:        '+str(len(self._print_scopes)))
+        log.info('    Ambiguous Topics:   '+str(len(self._print_ambiguities)))
+        log.info('    Linked Topics:      '+str(len(self._print_topics)))
+        log.info('    Warnings:           '+str(len(self._warnings)))
 
         if 0 < len(self._warnings):
             # print out the list of warning-sites:
             log.info('## Warning Sites:')
             for w in self._warnings:
+                scope_name = 'no-scope'
+                if None is not w[0]:
+                    scope_name = w[0].name
                 # warnings tuple contains: (current_scope, file_name, line_number, line)
-                log.info("    -['{}']:{:<64s}:{} = {}".format(w[0].name, w[1].lstrip('/.'), w[2], w[3] ))
+                log.info("    -['{}']:{:<64s}:{} = {}".format(scope_name, w[1].lstrip('/.'), w[2], w[3] ))
 
         # initialize colors
         color_list = get_N_colors(len(self._print_topics), 0.7, 0.85)
@@ -334,9 +320,8 @@ class Graph(object):
         published_topics = set()
         ambiguous_topics = set()
 
-        # gather all possible modules...
-        # all_scopes = self._found_libraries | self._found_modules         # Python 3.9 or greater
-        all_scopes = { **self._found_libraries, **self._found_modules }    # Python 3.5 or greater
+        # gather all found scopes:
+        all_scopes = { **self._found_libraries, **self._found_modules }
 
         if 0 == len(self._scope_whitelist):
             select_scopes = self._found_modules
@@ -346,27 +331,28 @@ class Graph(object):
                 if scope_name in all_scopes:
                     select_scopes[scope_name] = all_scopes[scope_name]
         if not isinstance(select_scopes, dict) or 0 == len(select_scopes):
-            raise TypeError("'select_scopes' should be a set!! aborting.")
+            log.error("!! No requested modules not found -- exiting.")
+            sys.exit(0)
 
-        log.debug(f'    >> Condensing found topics: scope -> total')
+        log.debug('### Condensing found topics: scope -> total')
         for name,scope in select_scopes.items():
-            log.debug(f'        @@ Scope: {name}')
+            log.debug('    # Scope: '+ name )
 
-            log.debug(f'          ## Subs: {name}')
-            for topic in scope.subscriptions:
-                log.debug(f'            - {topic}')
+            log.debug('        ## Subs: ' + str(len(scope.subscriptions)))
+            for topic in sorted(scope.subscriptions):
+                log.debug('            - ' + topic)
                 subscribed_topics.add(topic)
 
-            log.debug(f'          ## Pubs: {name}')
-            for topic in scope.publications:
-                log.debug(f'            - {topic}')
+            log.debug('        ## Pubs: ' + str(len(scope.publications)))
+            for topic in sorted(scope.publications):
+                log.debug('            - ' + topic )
                 published_topics.add(topic)
 
             scope.reduce_ambiguities()
 
-            log.debug(f'          ## Ambiguities: {name}')
-            for topic in scope.ambiguities:
-                log.debug(f'            - {topic}')
+            log.debug('        ## Ambiguities: ' + str(len(scope.ambiguities)))
+            for topic in sorted(scope.ambiguities):
+                log.debug('            - ' + topic )
                 ambiguous_topics.add(topic)
 
         # filter modules iff they have at least a subscription or a publication
@@ -400,11 +386,11 @@ class Graph(object):
 
         entries = os.listdir(path)
 
-        # check if entering a new module
+        # check if entering a new scope
         cmake_file = 'CMakeLists.txt'
-        new_module = False
+        new_scope = False
         if cmake_file in entries:
-            new_module = self._extract_build_information(os.path.join(path, cmake_file), **kwargs)
+            new_scope = self._extract_build_information(os.path.join(path, cmake_file), **kwargs)
 
         # iterate directories recursively
         for entry in entries:
@@ -414,23 +400,23 @@ class Graph(object):
 
 
         # iterate source files
-        # Note: Skip all entries if we're not in a module -- both finding known pubs/subs and emitting warnings
-        if (0 == len(self._scope_whitelist)) or (0 < len(self._current_scope)) and (self._current_scope[-1].name in self._scope_whitelist):
-            for entry in entries:
-                file_name = os.path.join(path, entry)
-                if os.path.isfile(file_name):
-                    _, ext = os.path.splitext(file_name)
-                    if ext in ['.cpp', '.c', '.h', '.hpp']:
-                        self._process_source_file(file_name)
+        # Note: Skip all entries if we're not in a scope -- both finding known pubs/subs and emitting warnings
+        for entry in entries:
+            file_name = os.path.join(path, entry)
+            if os.path.isfile(file_name):
+                _, ext = os.path.splitext(file_name)
+                if ext in ['.cpp', '.c', '.h', '.hpp']:
+                    self._process_source_file(file_name)
 
-
-        if new_module:
+        if new_scope:
             self._current_scope.pop()
 
 
     def _extract_build_information(self, file_name, **kwargs):
-        """ extract the module name from a CMakeLists.txt file and store
-            in self._current_scope if there is any """
+        """ extract the module or library name from a CMakeLists.txt file and store
+            in self._current_scope if there is any
+            Also records dependencies, if any are specified.
+        """
 
         datafile = open(file_name)
         found_module_def = False
@@ -496,52 +482,59 @@ class Graph(object):
 
 
             current_scope = self._get_current_scope()
+            if current_scope:
+                if current_scope.name in self._scope_blacklist:
+                    return
+                elif current_scope.name == 'uorb_tests': # skip this
+                    return
+                elif current_scope.name == 'uorb':
 
-            if current_scope is None:
-                return  # ignore declarations outside of a declared module
-            elif current_scope.name in self._scope_blacklist:
-                return
-            elif current_scope.name == 'uorb_tests': # skip this
-                return
-            elif current_scope.name == 'uorb':
+                    # search and validate the ORB_ID_VEHICLE_ATTITUDE_CONTROLS define
+                    matches = self._orb_id_vehicle_attitude_controls_re.findall(content)
+                    for match in matches:
+                        if match != 'ORB_ID('+self._orb_id_vehicle_attitude_controls_topic:
+                            # if we land here, you need to change _orb_id_vehicle_attitude_controls_topic
+                            raise Exception(
+                                'The extracted define for ORB_ID_VEHICLE_ATTITUDE_CONTROLS '
+                                'is '+match+' but expected ORB_ID('+
+                                self._orb_id_vehicle_attitude_controls_topic)
 
-                # search and validate the ORB_ID_VEHICLE_ATTITUDE_CONTROLS define
-                matches = self._orb_id_vehicle_attitude_controls_re.findall(content)
-                for match in matches:
-                    if match != 'ORB_ID('+self._orb_id_vehicle_attitude_controls_topic:
-                        # if we land here, you need to change _orb_id_vehicle_attitude_controls_topic
-                        raise Exception(
-                            'The extracted define for ORB_ID_VEHICLE_ATTITUDE_CONTROLS '
-                            'is '+match+' but expected ORB_ID('+
-                            self._orb_id_vehicle_attitude_controls_topic)
-
-                return # skip uorb module for the rest
+                    return # skip uorb module for the rest
 
             line_number = 0
-            for line in content.splitlines():
+            for full_line in content.splitlines():
                 line_number += 1
 
-                pub_topics = self._publications.match(line)
-                for each_topic in pub_topics:
-                    current_scope.publications.add(each_topic)
-                if pub_topics:
-                    continue
+                short_line = re.sub(self._whitespace_pattern, '', full_line)
 
-                sub_topics = self._subscriptions.match(line)
-                for each_topic in sub_topics:
-                    current_scope.subscriptions.add(each_topic)
-                if sub_topics:
-                    continue
+                topic = self._publications.match(short_line)
+                if topic:
+                    if current_scope:
+                        current_scope.publications.add(topic)
+                        continue
+                    else:
+                        raise AssertionError("Encountered Publication topic outside of any scope! " + file_name + " Aborting!")
 
-                ambi_topics = self._ambiguities.match(line)
-                for each_topic in ambi_topics:
-                    current_scope.ambiguities.add(each_topic)
-                    self._warnings.append((current_scope, file_name, line_number, line))
+                topic = self._subscriptions.match(short_line)
+                if topic:
+                    if current_scope:
+                        current_scope.subscriptions.add(topic)
+                        continue
+                    else:
+                        raise AssertionError("Encountered Subscription topic outside of any scope! " + file_name + " Aborting!")
+
+                topic = self._ambiguities.match(short_line)
+                if topic:
+                    if current_scope:
+                        if topic != PubSub.AMBIGUOUS_SITE_TOPIC:
+                            current_scope.ambiguities.add(topic)
+                        self._warnings.append((current_scope, file_name, line_number, full_line))
+                        continue
+                    else:
+                        raise AssertionError("Encountered Ambiguous topic outside of any scope! " + file_name + " Aborting!")
 
     def _in_scope(self, scope_name = None):
-        if 0 == len(self._scope_whitelist):
-            return True
-        elif 0 < len(self._current_scope):
+        if 0 < len(self._current_scope):
             if None is scope_name:
                 scope_name = self._current_scope[-1].name
             if scope_name in self._scope_whitelist:
@@ -550,8 +543,10 @@ class Graph(object):
         return False
 
     def merge_depends(self):
+        log.info('### Merge Depends:')
+
         for modname,module in self._found_modules.items():
-            if self._in_scope(modname):
+            if modname in self._scope_whitelist or 0==len(self._scope_whitelist):
                 for depname in module.dependencies:
                     if depname in self._found_libraries:
                         dep = self._found_libraries[depname]
@@ -730,33 +725,38 @@ if "__main__" == __name__:
     topic_blacklist = [ 'parameter_update', 'mavlink_log', 'log_message' ]
     print('Excluded topics: '+str(topic_blacklist))
 
-    # ignore certain modules; for any reason
-    scope_blacklist = []
-    if scope_blacklist:
-        print('Excluded Modules: '+str(topic_blacklist))
-
     if len(args.modules) == 0:
         scope_whitelist = []
     else:
         scope_whitelist = [ m.strip() for m in args.modules.split(',')]
         scope_whitelist = set(scope_whitelist)
 
-    graph = Graph(scope_whitelist=scope_whitelist, scope_blacklist=scope_blacklist, topic_blacklist=topic_blacklist)
+    graph = Graph(scope_whitelist=scope_whitelist, topic_blacklist=topic_blacklist)
+
+    # if no source paths are supplied, guess that we're in the project root, and apply it to the entire 'src/' tree
     if len(args.src_path) == 0:
         args.src_path = ['src']
 
-        if not os.path.exists(args.src_path[0]):
-            print(f"    !?could not find source directory: {args.src_path[0]}")
-            script_path = os.path.dirname(os.path.realpath(__file__))
-            args.src_path[0] = os.path.realpath(os.path.join( script_path, '..', '..', 'src' ))
-            print(f"        >> guessing at path: {args.src_path[0]}")
-
+    # transcribe only the source paths that actually exist:
+    source_paths = []
     for path in args.src_path:
-        if not os.path.exists(path):
-            print(f"    !?could not find source directory: {path} -- please check path!")
-            print(f"    Exiting.")
+        if os.path.exists(path):
+            source_paths.append(path)
+        else:
+            log.warn("Could not find path: " + path)
 
-    graph.build(args.src_path, args.exclude_path, use_topic_pubsub_union=args.use_topic_union, merge_depends=args.merge_depends)
+    if 0 == len(source_paths):
+        print("!! None of the source directories were valid -- Exiting.")
+        sys.exit(-1)
+
+    # ignore certain paths
+    path_blacklist = ['src/lib/parameters/']
+    if 0 < len(args.exclude_path):
+        path_blacklist = args.exclude_path
+    if path_blacklist:
+        print('Excluded Path: '+str(path_blacklist))
+
+    graph.build(source_paths, path_blacklist=path_blacklist, use_topic_pubsub_union=args.use_topic_union, merge_depends=args.merge_depends)
 
     if args.output == 'json':
         output_json = OutputJSON(graph)

boards/airmind/mindpx-v2/default.cmake

@@ -8,13 +8,13 @@ px4_add_board(
 	ARCHITECTURE cortex-m4
 	CONSTRAINED_MEMORY
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 1
 	SERIAL_PORTS
 		GPS1:/dev/ttyS3
 		TEL1:/dev/ttyS1
 		TEL2:/dev/ttyS2
 	DRIVERS
+		adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -26,18 +26,18 @@ px4_add_board(
 		gps
 		#heater
 		#imu # all available imu drivers
+		imu/invensense/icm20948 # required for ak09916 mag
 		imu/l3gd20
 		imu/lsm303d
 		imu/invensense/mpu6000
 		imu/invensense/mpu6500
 		irlock
-		lights/blinkm
-		lights/rgbled
-		#lights/rgbled_ncp5623c
+		lights # all available light drivers
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
 		pwm_input
@@ -45,8 +45,8 @@ px4_add_board(
 		pwm_out
 		rc_input
 		roboclaw
+		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -57,6 +57,7 @@ px4_add_board(
 		commander
 		dataman
 		ekf2
+		esc_battery
 		events
 		flight_mode_manager
 		fw_att_control
@@ -73,12 +74,15 @@ px4_add_board(
 		mc_hover_thrust_estimator
 		mc_pos_control
 		mc_rate_control
+		#micrortps_bridge
 		navigator
 		rc_update
 		rover_pos_control
 		sensors
 		sih
 		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -86,6 +90,7 @@ px4_add_board(
 		#dmesg
 		dumpfile
 		esc_calib
+		gpio
 		hardfault_log
 		i2cdetect
 		led_control
@@ -101,8 +106,8 @@ px4_add_board(
 		reboot
 		reflect
 		sd_bench
+		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -112,13 +117,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/airmind/mindpx-v2/nuttx-config/nsh/defconfig

@@ -101,6 +101,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15

boards/ark/can-flow/nuttx-config/nsh/defconfig

@@ -81,6 +81,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15

boards/atlflight/eagle/default.cmake

@@ -39,7 +39,6 @@ px4_add_board(
 	VENDOR atlflight
 	MODEL eagle
 	LABEL default
-	#TESTING
 	TOOLCHAIN arm-linux-gnueabihf
 	ROMFSROOT px4fmu_common
 	DRIVERS
@@ -108,7 +107,6 @@ px4_add_board(
 		sd_bench
 		shutdown
 		system_time
-		#tests # tests and test runner
 		#top
 		topic_listener
 		tune_control

boards/atlflight/excelsior/default.cmake

@@ -39,7 +39,6 @@ px4_add_board(
 	VENDOR atlflight
 	MODEL excelsior
 	LABEL default
-	#TESTING
 	TOOLCHAIN arm-oemllib32-linux-gnueabi
 	DRIVERS
 		#barometer # all available barometer drivers
@@ -106,7 +105,6 @@ px4_add_board(
 		sd_bench
 		shutdown
 		system_time
-		#tests # tests and test runner
 		#top
 		topic_listener
 		tune_control

boards/av/x-v1/default.cmake

@@ -7,7 +7,6 @@ px4_add_board(
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
-	TESTING
 	UAVCAN_INTERFACES 2
 	ETHERNET
 	SERIAL_PORTS
@@ -17,6 +16,7 @@ px4_add_board(
 		TEL3:/dev/ttyS2
 		TEL4:/dev/ttyS3
 	DRIVERS
+		adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -26,18 +26,17 @@ px4_add_board(
 		distance_sensor # all available distance sensor drivers
 		#dshot
 		gps
-		#heater
 		#imu # all available imu drivers
 		imu/adis16477
 		imu/adis16497
+		imu/invensense/icm20948 # required for ak09916 mag
 		irlock
-		lights/blinkm
-		#lights/rgbled
-		#lights/rgbled_ncp5623c
+		lights # all available light drivers
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
 		#pwm_input
@@ -45,8 +44,8 @@ px4_add_board(
 		pwm_out
 		rc_input
 		roboclaw
+		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		#tone_alarm
 		uavcan
 	MODULES
@@ -57,6 +56,7 @@ px4_add_board(
 		commander
 		dataman
 		ekf2
+		esc_battery
 		events
 		flight_mode_manager
 		fw_att_control
@@ -73,19 +73,23 @@ px4_add_board(
 		mc_hover_thrust_estimator
 		mc_pos_control
 		mc_rate_control
+		#micrortps_bridge
 		navigator
 		rc_update
 		rover_pos_control
 		sensors
 		sih
 		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
-		#bl_update
+		bl_update
 		dmesg
 		dumpfile
 		esc_calib
+		gpio
 		hardfault_log
 		i2cdetect
 		led_control
@@ -93,14 +97,15 @@ px4_add_board(
 		motor_ramp
 		motor_test
 		nshterm
+		netman
 		param
 		perf
 		pwm
 		reboot
 		reflect
 		sd_bench
+		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -109,13 +114,15 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
-		hello
-		hwtest # Hardware test
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
 		#matlab_csv_serial
-		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
-		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
-		rover_steering_control # Rover example app
-		uuv_example_app
-		work_item
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
 	)

boards/av/x-v1/nuttx-config/nsh/defconfig

@@ -14,12 +14,10 @@
 # CONFIG_MMCSD_SPI is not set
 # CONFIG_NSH_DISABLEBG is not set
 # CONFIG_NSH_DISABLESCRIPT is not set
-# CONFIG_NSH_DISABLE_ADDROUTE is not set
 # CONFIG_NSH_DISABLE_ARP is not set
 # CONFIG_NSH_DISABLE_BASENAME is not set
 # CONFIG_NSH_DISABLE_CMP is not set
 # CONFIG_NSH_DISABLE_DD is not set
-# CONFIG_NSH_DISABLE_DELROUTE is not set
 # CONFIG_NSH_DISABLE_DF is not set
 # CONFIG_NSH_DISABLE_DIRNAME is not set
 # CONFIG_NSH_DISABLE_EXEC is not set
@@ -32,7 +30,6 @@
 # CONFIG_NSH_DISABLE_MKRD is not set
 # CONFIG_NSH_DISABLE_PRINTF is not set
 # CONFIG_NSH_DISABLE_PUT is not set
-# CONFIG_NSH_DISABLE_ROUTE is not set
 # CONFIG_NSH_DISABLE_SEMICOLON is not set
 # CONFIG_NSH_DISABLE_TIME is not set
 # CONFIG_NSH_DISABLE_UNAME is not set
@@ -74,15 +71,13 @@ CONFIG_FAT_LCNAMES=y
 CONFIG_FAT_LFN=y
 CONFIG_FAT_LFN_ALIAS_HASH=y
 CONFIG_FDCLONE_STDIO=y
+CONFIG_FSUTILS_IPCFG=y
 CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
 CONFIG_FS_PROCFS=y
-CONFIG_FS_PROCFS_EXCLUDE_BLOCKS=y
-CONFIG_FS_PROCFS_EXCLUDE_MOUNT=y
-CONFIG_FS_PROCFS_EXCLUDE_MOUNTS=y
-CONFIG_FS_PROCFS_EXCLUDE_USAGE=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
 CONFIG_GRAN=y
@@ -108,12 +103,18 @@ CONFIG_NETDB_DNSCLIENT=y
 CONFIG_NETDB_DNSCLIENT_ENTRIES=8
 CONFIG_NETDB_DNSSERVER_NOADDR=y
 CONFIG_NETDEV_PHY_IOCTL=y
+CONFIG_NETINIT_DHCPC=y
+CONFIG_NETINIT_DNS=y
+CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
+CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_THREAD=y
+CONFIG_NETINIT_THREAD_PRIORITY=49
 CONFIG_NETUTILS_TELNETD=y
 CONFIG_NET_ARP_IPIN=y
 CONFIG_NET_ARP_SEND=y
 CONFIG_NET_BROADCAST=y
 CONFIG_NET_ICMP=y
-CONFIG_NET_ROUTE=y
+CONFIG_NET_ICMP_SOCKET=y
 CONFIG_NET_SOCKOPTS=y
 CONFIG_NET_SOLINGER=y
 CONFIG_NET_TCP=y
@@ -121,6 +122,7 @@ CONFIG_NET_TCPBACKLOG=y
 CONFIG_NET_TCP_WRITE_BUFFERS=y
 CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
+CONFIG_NET_UDP_WRITE_BUFFERS=y
 CONFIG_NFILE_DESCRIPTORS=12
 CONFIG_NSH_ARCHINIT=y
 CONFIG_NSH_ARCHROMFS=y
@@ -128,9 +130,10 @@ CONFIG_NSH_ARGCAT=y
 CONFIG_NSH_BUILTIN_APPS=y
 CONFIG_NSH_CMDPARMS=y
 CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_DISABLE_MB=y
+CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_LINELEN=128
-CONFIG_NSH_LOGIN_PASSWORD="px4"
-CONFIG_NSH_LOGIN_USERNAME="px4"
 CONFIG_NSH_MAXARGUMENTS=15
 CONFIG_NSH_NESTDEPTH=8
 CONFIG_NSH_QUOTE=y
@@ -195,6 +198,7 @@ CONFIG_STM32F7_PHYSR_10FD=0x14
 CONFIG_STM32F7_PHYSR_10HD=0x4
 CONFIG_STM32F7_PHYSR_ALTCONFIG=y
 CONFIG_STM32F7_PHYSR_ALTMODE=0x1C
+CONFIG_STM32F7_PROGMEM=y
 CONFIG_STM32F7_PWR=y
 CONFIG_STM32F7_RTC=y
 CONFIG_STM32F7_RTC_HSECLOCK=y
@@ -229,6 +233,7 @@ CONFIG_STM32F7_USART_INVERT=y
 CONFIG_STM32F7_USART_SINGLEWIRE=y
 CONFIG_STM32F7_USART_SWAP=y
 CONFIG_STM32F7_WWDG=y
+CONFIG_SYSTEM_DHCPC_RENEW=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_SYSTEM_PING=y
 CONFIG_TASK_NAME_SIZE=24

boards/beaglebone/blue/default.cmake

@@ -14,6 +14,7 @@ px4_add_board(
 	TOOLCHAIN arm-linux-gnueabihf
 	TESTING
 	DRIVERS
+		adc/ads1115
 		adc/board_adc
 		#barometer # all available barometer drivers
 		barometer/bmp280
@@ -24,6 +25,8 @@ px4_add_board(
 		distance_sensor # all available distance sensor drivers
 		gps
 		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/invensense/icm20948 # required for ak09916 mag
 		imu/invensense/mpu9250
 		linux_pwm_out
 		#magnetometer # all available magnetometer drivers
@@ -39,6 +42,7 @@ px4_add_board(
 		commander
 		dataman
 		ekf2
+		esc_battery
 		events
 		flight_mode_manager
 		fw_att_control
@@ -63,6 +67,8 @@ px4_add_board(
 		sih
 		#simulator
 		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -76,8 +82,9 @@ px4_add_board(
 		perf
 		pwm
 		sd_bench
-		shutdown
+		#serial_test
 		system_time
+		shutdown
 		tests # tests and test runner
 		#top
 		topic_listener
@@ -86,8 +93,10 @@ px4_add_board(
 		ver
 		work_queue
 	EXAMPLES
-		fake_gps
 		dyn_hello # dynamically loading modules example
+		fake_gps
+		fake_gyro
+		fake_magnetometer
 		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		hello
 		#hwtest # Hardware test

boards/bitcraze/crazyflie/nuttx-config/nsh/defconfig

@@ -97,6 +97,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_FATDEVNO=0
 CONFIG_NSH_LINELEN=128

boards/bitcraze/crazyflie21/nuttx-config/nsh/defconfig

@@ -96,6 +96,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_FATDEVNO=0
 CONFIG_NSH_LINELEN=128

boards/cuav/can-gps-v1/nuttx-config/nsh/defconfig

@@ -81,6 +81,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15

boards/cuav/nora/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	BUILD_BOOTLOADER
-	TESTING
 	UAVCAN_INTERFACES 2
 	UAVCAN_TIMER_OVERRIDE 2
 	SERIAL_PORTS
@@ -19,6 +18,7 @@ px4_add_board(
 		# CONSOLE: /dev/ttyS4
 		# RC: /dev/ttyS5
 	DRIVERS
+		adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -30,27 +30,28 @@ px4_add_board(
 		gps
 		heater
 		#imu # all available imu drivers
+		imu/analog_devices/adis16448
 		imu/bosch/bmi088
 		imu/invensense/icm20649
 		imu/invensense/icm20689
+		imu/invensense/icm20948 # required for ak09916 mag
 		irlock
-		lights/blinkm
-		lights/rgbled
-		lights/rgbled_ncp5623c
+		lights # all available light drivers
 		lights/rgbled_pwm
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
 		pwm_out_sim
 		pwm_out
 		rc_input
 		roboclaw
+		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -61,6 +62,7 @@ px4_add_board(
 		commander
 		dataman
 		ekf2
+		esc_battery
 		events
 		flight_mode_manager
 		fw_att_control
@@ -77,12 +79,15 @@ px4_add_board(
 		mc_hover_thrust_estimator
 		mc_pos_control
 		mc_rate_control
+		#micrortps_bridge
 		navigator
 		rc_update
 		rover_pos_control
 		sensors
 		sih
 		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -90,6 +95,7 @@ px4_add_board(
 		dmesg
 		dumpfile
 		esc_calib
+		gpio
 		hardfault_log
 		i2cdetect
 		led_control
@@ -105,8 +111,8 @@ px4_add_board(
 		reboot
 		reflect
 		sd_bench
+		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -116,7 +122,8 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_magnetometer
+		#fake_gyro
+		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
 		#hwtest # Hardware test

boards/cuav/nora/init/rc.board_defaults

@@ -3,6 +3,9 @@
 # board specific defaults
 #------------------------------------------------------------------------------
 
+# Enables the 2nd bank of mixers
+set AUX_BANK2 yes
+
 param set-default BAT_V_DIV 18
 param set-default BAT1_V_DIV 18
 param set-default BAT2_V_DIV 18

boards/cuav/nora/init/rc.board_mavlink

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# board specific board MAVLink startup script.
+# board specific MAVLink startup script.
 #------------------------------------------------------------------------------
 
 # Start MAVLink on the USB port

boards/cuav/nora/nuttx-config/bootloader/defconfig

@@ -54,7 +54,6 @@ CONFIG_LIB_BOARDCTL=y
 CONFIG_MAX_TASKS=8
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=3
 CONFIG_NFILE_DESCRIPTORS=5
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PTHREAD_STACK_MIN=512

boards/cuav/nora/nuttx-config/include/board.h

@@ -250,25 +250,27 @@
 #define GPIO_CAN2_TX     GPIO_CAN2_TX_1        /* PB13 */
 
 /* SPI */
-#define GPIO_SPI1_SCK    GPIO_SPI1_SCK_3    /* PG11 */
-#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1   /* PA6 */
-#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_3   /* PD7 */
+#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
 
-#define GPIO_SPI2_SCK    GPIO_SPI2_SCK_6    /* PI1 */
-#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_3   /* PI2 */
-#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_4   /* PI3 */
+#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_3) /* PG11 */
+#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_1               /* PA6  */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_3               /* PD7  */
 
-#define GPIO_SPI4_SCK    GPIO_SPI4_SCK_2    /* PE2 */
-#define GPIO_SPI4_MISO   GPIO_SPI4_MISO_1   /* PE13 */
-#define GPIO_SPI4_MOSI   GPIO_SPI4_MOSI_2   /* PE6 */
+#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_6) /* PI1  */
+#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_3               /* PI2  */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_4               /* PI3  */
 
-#define GPIO_SPI5_SCK    GPIO_SPI5_SCK_1    /* PF7 */
-#define GPIO_SPI5_MISO   GPIO_SPI5_MISO_1   /* PF8 */
-#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_2   /* PF9 */
+#define GPIO_SPI4_SCK    ADJ_SLEW_RATE(GPIO_SPI4_SCK_2) /* PE2  */
+#define GPIO_SPI4_MISO   GPIO_SPI4_MISO_1               /* PE13 */
+#define GPIO_SPI4_MOSI   GPIO_SPI4_MOSI_2               /* PE6  */
 
-#define GPIO_SPI6_SCK    GPIO_SPI6_SCK_1    /* PG13 */
-#define GPIO_SPI6_MISO   GPIO_SPI6_MISO_1   /* PG12 */
-#define GPIO_SPI6_MOSI   GPIO_SPI6_MOSI_2   /* PA7 */
+#define GPIO_SPI5_SCK    ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7  */
+#define GPIO_SPI5_MISO   GPIO_SPI5_MISO_1               /* PF8  */
+#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_2               /* PF9  */
+
+#define GPIO_SPI6_SCK    ADJ_SLEW_RATE(GPIO_SPI6_SCK_1) /* PG13 */
+#define GPIO_SPI6_MISO   GPIO_SPI6_MISO_1               /* PG12 */
+#define GPIO_SPI6_MOSI   GPIO_SPI6_MOSI_2               /* PA7  */
 
 /* I2C */
 #define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */

boards/cuav/nora/nuttx-config/nsh/defconfig

@@ -88,6 +88,7 @@ CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MMCSD=y
 CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_REGIONS=4
 CONFIG_MTD=y
 CONFIG_MTD_BYTE_WRITE=y
 CONFIG_MTD_PARTITION=y
@@ -105,6 +106,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
@@ -161,8 +163,6 @@ CONFIG_STM32H7_BKPSRAM=y
 CONFIG_STM32H7_DMA1=y
 CONFIG_STM32H7_DMA2=y
 CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_DTCMEXCLUDE=y
-CONFIG_STM32H7_DTCM_PROCFS=y
 CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
 CONFIG_STM32H7_I2C1=y
 CONFIG_STM32H7_I2C2=y

boards/cuav/nora/nuttx-config/scripts/script.ld

@@ -199,11 +199,13 @@ SECTIONS
 
 	/* Emit the the D3 power domain section for locating BDMA data */
 
-	.sram4 (NOLOAD) :
+	.sram4_reserve (NOLOAD) :
 	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
 	} > SRAM4
 
-
 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
 	.stabstr 0 : { *(.stabstr) }

boards/cuav/nora/test.cmake

@@ -0,0 +1,139 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR cuav
+	MODEL nora
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	BUILD_BOOTLOADER
+	TESTING
+	UAVCAN_INTERFACES 2
+	UAVCAN_TIMER_OVERRIDE 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0
+		TEL1:/dev/ttyS1
+		GPS2:/dev/ttyS2
+		TEL2:/dev/ttyS3
+		# CONSOLE: /dev/ttyS4
+		# RC: /dev/ttyS5
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/bosch/bmi088
+		imu/invensense/icm20649
+		imu/invensense/icm20689
+		imu/invensense/icm20948 # required for ak09916 mag
+		#irlock
+		lights # all available light drivers
+		lights/rgbled_pwm
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_out_sim
+		pwm_out
+		rc_input
+		#roboclaw
+		#rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		#rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
+		#matlab_csv_serial
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
+	)

boards/cuav/x7pro/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	BUILD_BOOTLOADER
-	TESTING
 	UAVCAN_INTERFACES 2
 	UAVCAN_TIMER_OVERRIDE 2
 	SERIAL_PORTS
@@ -19,6 +18,7 @@ px4_add_board(
 		# CONSOLE: /dev/ttyS4
 		# RC: /dev/ttyS5
 	DRIVERS
+		adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -29,27 +29,30 @@ px4_add_board(
 		dshot
 		gps
 		heater
-		#imu # all relevant IMU drivers
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
 		imu/analog_devices/adis16470
 		imu/bosch/bmi088
 		imu/invensense/icm20649
 		imu/invensense/icm20689
+		imu/invensense/icm20948 # required for ak09916 mag
 		irlock
-		lights/rgbled
-		#lights/rgbled_ncp5623c
-		#lights/rgbled_pwm
+		lights # all available light drivers
+		lights/rgbled_pwm
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
 		pwm_out_sim
 		pwm_out
 		rc_input
+		roboclaw
+		rpm
 		safety_button
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -60,6 +63,7 @@ px4_add_board(
 		commander
 		dataman
 		ekf2
+		esc_battery
 		events
 		flight_mode_manager
 		fw_att_control
@@ -76,12 +80,15 @@ px4_add_board(
 		mc_hover_thrust_estimator
 		mc_pos_control
 		mc_rate_control
+		#micrortps_bridge
 		navigator
 		rc_update
 		rover_pos_control
 		sensors
 		sih
 		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -89,6 +96,7 @@ px4_add_board(
 		dmesg
 		dumpfile
 		esc_calib
+		gpio
 		hardfault_log
 		i2cdetect
 		led_control
@@ -104,8 +112,8 @@ px4_add_board(
 		reboot
 		reflect
 		sd_bench
+		serial_test
 		system_time
-		tests # tests and test runner
 		top
 		topic_listener
 		tune_control
@@ -115,8 +123,8 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_gyro
-		fake_magnetometer
+		#fake_gyro
+		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
 		#hwtest # Hardware test

boards/cuav/x7pro/init/rc.board_defaults

@@ -17,7 +17,5 @@ param set-default BAT2_A_PER_V 24
 # Enable IMU thermal control
 param set-default SENS_EN_THERMAL 1
 
-param set-default IMU_GYRO_FFT_EN 1
-
 rgbled_pwm start
 safety_button start

boards/cuav/x7pro/init/rc.board_mavlink

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# board specific board MAVLink startup script.
+# board specific MAVLink startup script.
 #------------------------------------------------------------------------------
 
 # Start MAVLink on the USB port

boards/cuav/x7pro/nuttx-config/bootloader/defconfig

@@ -54,7 +54,6 @@ CONFIG_LIB_BOARDCTL=y
 CONFIG_MAX_TASKS=8
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=3
 CONFIG_NFILE_DESCRIPTORS=5
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PTHREAD_STACK_MIN=512

boards/cuav/x7pro/nuttx-config/nsh/defconfig

@@ -88,6 +88,7 @@ CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MMCSD=y
 CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_REGIONS=4
 CONFIG_MTD=y
 CONFIG_MTD_BYTE_WRITE=y
 CONFIG_MTD_PARTITION=y
@@ -105,6 +106,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
@@ -161,8 +163,6 @@ CONFIG_STM32H7_BKPSRAM=y
 CONFIG_STM32H7_DMA1=y
 CONFIG_STM32H7_DMA2=y
 CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_DTCMEXCLUDE=y
-CONFIG_STM32H7_DTCM_PROCFS=y
 CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
 CONFIG_STM32H7_I2C1=y
 CONFIG_STM32H7_I2C2=y

boards/cuav/x7pro/nuttx-config/scripts/script.ld

@@ -199,11 +199,13 @@ SECTIONS
 
 	/* Emit the the D3 power domain section for locating BDMA data */
 
-	.sram4 (NOLOAD) :
+	.sram4_reserve (NOLOAD) :
 	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
 	} > SRAM4
 
-
 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
 	.stabstr 0 : { *(.stabstr) }

boards/cuav/x7pro/test.cmake

@@ -0,0 +1,140 @@
+
+px4_add_board(
+	PLATFORM nuttx
+	VENDOR cuav
+	MODEL x7pro
+	LABEL test
+	TOOLCHAIN arm-none-eabi
+	ARCHITECTURE cortex-m7
+	ROMFSROOT px4fmu_common
+	BUILD_BOOTLOADER
+	TESTING
+	UAVCAN_INTERFACES 2
+	UAVCAN_TIMER_OVERRIDE 2
+	SERIAL_PORTS
+		GPS1:/dev/ttyS0
+		TEL1:/dev/ttyS1
+		GPS2:/dev/ttyS2
+		TEL2:/dev/ttyS3
+		# CONSOLE: /dev/ttyS4
+		# RC: /dev/ttyS5
+	DRIVERS
+		adc/ads1115
+		adc/board_adc
+		barometer # all available barometer drivers
+		batt_smbus
+		camera_capture
+		camera_trigger
+		differential_pressure # all available differential pressure drivers
+		distance_sensor # all available distance sensor drivers
+		dshot
+		gps
+		heater
+		#imu # all available imu drivers
+		imu/analog_devices/adis16448
+		imu/analog_devices/adis16470
+		imu/bosch/bmi088
+		imu/invensense/icm20649
+		imu/invensense/icm20689
+		imu/invensense/icm20948 # required for ak09916 mag
+		#irlock
+		lights # all available light drivers
+		lights/rgbled_pwm
+		magnetometer # all available magnetometer drivers
+		optical_flow # all available optical flow drivers
+		osd
+		pca9685
+		pca9685_pwm_out
+		power_monitor/ina226
+		#protocol_splitter
+		pwm_out_sim
+		pwm_out
+		rc_input
+		#roboclaw
+		#rpm
+		safety_button
+		telemetry # all available telemetry drivers
+		test_ppm
+		tone_alarm
+		uavcan
+	MODULES
+		airspeed_selector
+		attitude_estimator_q
+		battery_status
+		camera_feedback
+		commander
+		dataman
+		ekf2
+		esc_battery
+		events
+		flight_mode_manager
+		fw_att_control
+		fw_pos_control_l1
+		gyro_calibration
+		gyro_fft
+		land_detector
+		landing_target_estimator
+		load_mon
+		local_position_estimator
+		logger
+		mavlink
+		mc_att_control
+		mc_hover_thrust_estimator
+		mc_pos_control
+		mc_rate_control
+		#micrortps_bridge
+		navigator
+		rc_update
+		#rover_pos_control
+		sensors
+		sih
+		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
+		vmount
+		vtol_att_control
+	SYSTEMCMDS
+		bl_update
+		dmesg
+		dumpfile
+		esc_calib
+		gpio
+		hardfault_log
+		i2cdetect
+		led_control
+		mft
+		mixer
+		motor_ramp
+		motor_test
+		mtd
+		nshterm
+		param
+		perf
+		pwm
+		reboot
+		reflect
+		sd_bench
+		serial_test
+		system_time
+		tests # tests and test runner
+		top
+		topic_listener
+		tune_control
+		uorb
+		usb_connected
+		ver
+		work_queue
+	EXAMPLES
+		fake_gps
+		#fake_gyro
+		#fake_magnetometer
+		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
+		#hello
+		#hwtest # Hardware test
+		#matlab_csv_serial
+		#px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
+		#px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
+		#rover_steering_control # Rover example app
+		#uuv_example_app
+		#work_item
+	)

boards/cubepilot/cubeorange/default.cmake

@@ -9,7 +9,6 @@ px4_add_board(
 	ROMFSROOT px4fmu_common
 	BUILD_BOOTLOADER
 	IO cubepilot_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		TEL1:/dev/ttyS0
@@ -19,6 +18,7 @@ px4_add_board(
 		TEL3:/dev/ttyS4
 		GPS2:/dev/ttyS5
 	DRIVERS
+		adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -35,22 +35,21 @@ px4_add_board(
 		imu/invensense/icm20649
 		imu/invensense/icm20948
 		irlock
-		lights/blinkm
-		lights/rgbled
-		lights/rgbled_ncp5623c
+		lights # all available light drivers
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
+		pwm_input
 		pwm_out_sim
 		pwm_out
 		px4io
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		#test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -85,6 +84,8 @@ px4_add_board(
 		sensors
 		sih
 		temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -108,7 +109,8 @@ px4_add_board(
 		reboot
 		reflect
 		sd_bench
-		#tests # tests and test runner
+		#serial_test
+		system_time
 		top
 		topic_listener
 		tune_control
@@ -118,7 +120,8 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_magnetometer
+		#fake_gyro
+		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
 		#hwtest # Hardware test

boards/cubepilot/cubeorange/init/rc.board_sensors

@@ -13,5 +13,3 @@ icm20948 -s -b 4 -R 10 -M start
 ms5611 -s -b 1 start
 icm20649 -s -b 1 start
 
-# standard Here/Here2 connected to GPS1
-ak09916 -X -b 1 -R 6 start # external AK09916 (Here2) is rotated 270 degrees yaw

boards/cubepilot/cubeorange/nuttx-config/bootloader/defconfig

@@ -54,7 +54,6 @@ CONFIG_LIB_BOARDCTL=y
 CONFIG_MAX_TASKS=8
 CONFIG_MEMSET_64BIT=y
 CONFIG_MEMSET_OPTSPEED=y
-CONFIG_MM_REGIONS=3
 CONFIG_NFILE_DESCRIPTORS=5
 CONFIG_PREALLOC_TIMERS=50
 CONFIG_PTHREAD_STACK_MIN=512

boards/cubepilot/cubeorange/nuttx-config/nsh/defconfig

@@ -59,7 +59,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
 CONFIG_FAT_LCNAMES=y
@@ -90,7 +89,7 @@ CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MMCSD=y
 CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_REGIONS=3
+CONFIG_MM_REGIONS=4
 CONFIG_MTD=y
 CONFIG_MTD_BYTE_WRITE=y
 CONFIG_MTD_PARTITION=y
@@ -108,6 +107,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
@@ -163,8 +163,6 @@ CONFIG_STM32H7_BKPSRAM=y
 CONFIG_STM32H7_DMA1=y
 CONFIG_STM32H7_DMA2=y
 CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_DTCMEXCLUDE=y
-CONFIG_STM32H7_DTCM_PROCFS=y
 CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
 CONFIG_STM32H7_I2C1=y
 CONFIG_STM32H7_I2C2=y
@@ -235,3 +233,4 @@ CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
 CONFIG_USERMAIN_STACKSIZE=2944
 CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y

boards/cubepilot/cubeorange/nuttx-config/scripts/script.ld

@@ -198,6 +198,15 @@ SECTIONS
 		_ebss = ABSOLUTE(.);
 	} > AXI_SRAM
 
+	/* Emit the the D3 power domain section for locating BDMA data */
+
+	.sram4_reserve (NOLOAD) :
+	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
+	} > SRAM4
+
 	/* Stabs debugging sections. */
 	.stab 0 : { *(.stab) }
 	.stabstr 0 : { *(.stabstr) }

boards/cubepilot/cubeorange/nuttx-config/test/defconfig

@@ -58,7 +58,6 @@ CONFIG_DEFAULT_SMALL=y
 CONFIG_DEV_FIFO_SIZE=0
 CONFIG_DEV_PIPE_MAXSIZE=1024
 CONFIG_DEV_PIPE_SIZE=70
-CONFIG_DISABLE_MQUEUE=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_FAT_DMAMEMORY=y
 CONFIG_FAT_LCNAMES=y
@@ -89,7 +88,7 @@ CONFIG_MEMSET_OPTSPEED=y
 CONFIG_MMCSD=y
 CONFIG_MMCSD_SDIO=y
 CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
-CONFIG_MM_REGIONS=3
+CONFIG_MM_REGIONS=4
 CONFIG_MTD=y
 CONFIG_MTD_BYTE_WRITE=y
 CONFIG_MTD_PARTITION=y
@@ -107,6 +106,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15
@@ -140,7 +140,7 @@ CONFIG_SCHED_LPWORKPRIORITY=50
 CONFIG_SCHED_LPWORKSTACKSIZE=1632
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
-CONFIG_SDMMC1_SDIO_MODE=y
+CONFIG_SDMMC1_SDIO_PULLUP=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0
 CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
@@ -162,8 +162,6 @@ CONFIG_STM32H7_BKPSRAM=y
 CONFIG_STM32H7_DMA1=y
 CONFIG_STM32H7_DMA2=y
 CONFIG_STM32H7_DMACAPABLE=y
-CONFIG_STM32H7_DTCMEXCLUDE=y
-CONFIG_STM32H7_DTCM_PROCFS=y
 CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
 CONFIG_STM32H7_I2C1=y
 CONFIG_STM32H7_I2C2=y
@@ -204,7 +202,6 @@ CONFIG_SYSTEM_CDCACM=y
 CONFIG_SYSTEM_NSH=y
 CONFIG_TASK_NAME_SIZE=24
 CONFIG_TTY_SIGINT=y
-CONFIG_TTY_SIGINT_CHAR=0x03
 CONFIG_TTY_SIGSTP=y
 CONFIG_UART4_BAUD=57600
 CONFIG_UART4_RXBUFSIZE=600
@@ -235,3 +232,4 @@ CONFIG_USBDEV_MAXPOWER=500
 CONFIG_USEC_PER_TICK=1000
 CONFIG_USERMAIN_STACKSIZE=2944
 CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y

boards/cubepilot/cubeorange/src/board_config.h

@@ -115,6 +115,11 @@
 #define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
 #define GPIO_TONE_ALARM         GPIO_TIM2_CH1OUT_2
 
+/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
+#define PWMIN_TIMER                       4
+#define PWMIN_TIMER_CHANNEL    /* T4C2 */ 2
+#define GPIO_PWM_IN            /* PD13 */ GPIO_TIM4_CH2IN_2
+
 /* USB
  *  OTG FS: PA9  OTG_FS_VBUS VBUS sensing
  */

boards/cubepilot/cubeorange/test.cmake

@@ -3,7 +3,7 @@ px4_add_board(
 	PLATFORM nuttx
 	VENDOR cubepilot
 	MODEL cubeorange
-	LABEL console
+	LABEL test
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
@@ -19,6 +19,7 @@ px4_add_board(
 		# CONSOLE:/dev/ttyS4
 		GPS2:/dev/ttyS5
 	DRIVERS
+		#adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -30,22 +31,19 @@ px4_add_board(
 		gps
 		#heater
 		#imu # all available imu drivers
-		#imu/analog_devices/adis16448
-		#imu/adis16477
-		#imu/adis16497
 		imu/invensense/icm20602
 		imu/invensense/icm20649
 		imu/invensense/icm20948
 		irlock
-		lights/blinkm
-		lights/rgbled
-		lights/rgbled_ncp5623c
+		lights # all available light drivers
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		#pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
+		pwm_input
 		pwm_out_sim
 		pwm_out
 		px4io
@@ -87,6 +85,8 @@ px4_add_board(
 		sensors
 		#sih
 		#temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -110,6 +110,8 @@ px4_add_board(
 		reboot
 		reflect
 		sd_bench
+		#serial_test
+		system_time
 		tests # tests and test runner
 		top
 		topic_listener
@@ -120,7 +122,8 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_magnetometer
+		#fake_gyro
+		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
 		#hwtest # Hardware test

boards/cubepilot/cubeyellow/default.cmake

@@ -8,7 +8,6 @@ px4_add_board(
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
 	IO cubepilot_io-v2_default
-	TESTING
 	UAVCAN_INTERFACES 2
 	SERIAL_PORTS
 		TEL1:/dev/ttyS0
@@ -18,6 +17,7 @@ px4_add_board(
 		TEL3:/dev/ttyS4
 		GPS2:/dev/ttyS5
 	DRIVERS
+		adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -34,13 +34,12 @@ px4_add_board(
 		imu/invensense/icm20649
 		imu/invensense/icm20948
 		irlock
-		lights/blinkm
-		lights/rgbled
-		lights/rgbled_ncp5623c
+		lights # all available light drivers
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
 		pwm_out_sim
@@ -49,7 +48,6 @@ px4_add_board(
 		roboclaw
 		rpm
 		telemetry # all available telemetry drivers
-		test_ppm
 		tone_alarm
 		uavcan
 	MODULES
@@ -84,6 +82,8 @@ px4_add_board(
 		sensors
 		sih
 		temperature_compensation
+		uuv_att_control
+		uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -107,7 +107,8 @@ px4_add_board(
 		reboot
 		reflect
 		sd_bench
-		tests # tests and test runner
+		#serial_test
+		system_time
 		top
 		topic_listener
 		tune_control
@@ -117,7 +118,8 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_magnetometer
+		#fake_gyro
+		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
 		#hwtest # Hardware test

boards/cubepilot/cubeyellow/init/rc.board_sensors

@@ -13,5 +13,3 @@ icm20948 -s -b 4 -R 10 -M start
 ms5611 -s -b 1 start
 icm20649 -s -b 1 start
 
-# standard Here/Here2 connected to GPS1
-ak09916 -X -b 1 -R 6 start # external AK09916 (Here2) is rotated 270 degrees yaw

boards/cubepilot/cubeyellow/nuttx-config/nsh/defconfig

@@ -107,6 +107,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15

boards/cubepilot/cubeyellow/nuttx-config/test/defconfig

@@ -106,6 +106,7 @@ CONFIG_NSH_DISABLE_IFCONFIG=y
 CONFIG_NSH_DISABLE_IFUPDOWN=y
 CONFIG_NSH_DISABLE_MB=y
 CONFIG_NSH_DISABLE_MH=y
+CONFIG_NSH_DISABLE_MW=y
 CONFIG_NSH_DISABLE_TELNETD=y
 CONFIG_NSH_LINELEN=128
 CONFIG_NSH_MAXARGUMENTS=15

boards/cubepilot/cubeyellow/test.cmake

@@ -3,7 +3,7 @@ px4_add_board(
 	PLATFORM nuttx
 	VENDOR cubepilot
 	MODEL cubeyellow
-	LABEL console
+	LABEL test
 	TOOLCHAIN arm-none-eabi
 	ARCHITECTURE cortex-m7
 	ROMFSROOT px4fmu_common
@@ -18,6 +18,7 @@ px4_add_board(
 		# CONSOLE:/dev/ttyS4
 		GPS2:/dev/ttyS5
 	DRIVERS
+		#adc/ads1115
 		adc/board_adc
 		barometer # all available barometer drivers
 		batt_smbus
@@ -29,18 +30,16 @@ px4_add_board(
 		gps
 		#heater
 		#imu # all available imu drivers
-		imu/analog_devices/adis16448
 		imu/invensense/icm20602
 		imu/invensense/icm20649
 		imu/invensense/icm20948
 		irlock
-		lights/blinkm
-		lights/rgbled
-		lights/rgbled_ncp5623c
+		lights # all available light drivers
 		magnetometer # all available magnetometer drivers
 		optical_flow # all available optical flow drivers
-		#osd
+		osd
 		pca9685
+		#pca9685_pwm_out
 		power_monitor/ina226
 		#protocol_splitter
 		pwm_out_sim
@@ -54,7 +53,7 @@ px4_add_board(
 		uavcan
 	MODULES
 		airspeed_selector
-		attitude_estimator_q
+		#attitude_estimator_q
 		battery_status
 		camera_feedback
 		commander
@@ -70,7 +69,7 @@ px4_add_board(
 		land_detector
 		landing_target_estimator
 		load_mon
-		local_position_estimator
+		#local_position_estimator
 		logger
 		mavlink
 		mc_att_control
@@ -80,10 +79,12 @@ px4_add_board(
 		#micrortps_bridge
 		navigator
 		rc_update
-		rover_pos_control
+		#rover_pos_control
 		sensors
-		sih
-		temperature_compensation
+		#sih
+		#temperature_compensation
+		#uuv_att_control
+		#uuv_pos_control
 		vmount
 		vtol_att_control
 	SYSTEMCMDS
@@ -107,6 +108,8 @@ px4_add_board(
 		reboot
 		reflect
 		sd_bench
+		#serial_test
+		system_time
 		tests # tests and test runner
 		top
 		topic_listener
@@ -117,7 +120,8 @@ px4_add_board(
 		work_queue
 	EXAMPLES
 		fake_gps
-		fake_magnetometer
+		#fake_gyro
+		#fake_magnetometer
 		#fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
 		#hello
 		#hwtest # Hardware test