init.d-posix: make all simulation airframes simulator specific

boards/cubepilot/cubeorange: initialize all I2C pins immediately
ak09916: enable retries and reset perf count
2026-05-23 21:57:35 +08:00 · 2022-09-01 22:00:22 -04:00 · 2022-09-01 20:46:09 -04:00 · 2022-09-01 20:45:20 -04:00 · 2022-09-01 20:42:21 -04:00 · 2022-09-01 20:40:37 -04:00
698 changed files with 36268 additions and 13011 deletions
@@ -794,7 +794,7 @@ void resetParameters() {
 void runTests() {

  // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 2100 3000 4001 6001 8001'

  resetParameters()

@@ -81,7 +81,7 @@ jobs:
      env:
        PX4_CMAKE_BUILD_TYPE: ${{matrix.config.build_type}}
        DONT_RUN: 1
-      run: make px4_sitl_default gazebo mavsdk_tests
+      run: make px4_sitl_default sitl_gazebo mavsdk_tests
    - name: ccache post-run mavsdk_tests
      run: ccache -s

@@ -6,12 +6,12 @@
 	path = src/drivers/uavcan/libuavcan
 	url = https://github.com/dronecan/libuavcan.git
 	branch = main
-[submodule "Tools/jMAVSim"]
-	path = Tools/jMAVSim
+[submodule "Tools/simulation/jmavsim/jMAVSim"]
+	path = Tools/simulation/jmavsim/jMAVSim
 	url = https://github.com/PX4/jMAVSim.git
 	branch = master
-[submodule "Tools/sitl_gazebo"]
-	path = Tools/sitl_gazebo
+[submodule "Tools/simulation/gazebo/sitl_gazebo"]
+	path = Tools/simulation/gazebo/sitl_gazebo
 	url = https://github.com/PX4/PX4-SITL_gazebo.git
 	branch = master
 [submodule "src/drivers/gps/devices"]
@@ -31,10 +31,10 @@
 	url = https://github.com/PX4/NuttX-apps.git
 	branch = px4_firmware_nuttx-10.1.0+
 [submodule "Tools/flightgear_bridge"]
-	path = Tools/flightgear_bridge
+	path = Tools/simulation/flightgear/flightgear_bridge
 	url = https://github.com/PX4/PX4-FlightGear-Bridge.git
-[submodule "Tools/jsbsim_bridge"]
-	path = Tools/jsbsim_bridge
+[submodule "Tools/simulation/jsbsim/jsbsim_bridge"]
+	path = Tools/simulation/jsbsim/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
 [submodule "src/drivers/cyphal/libcanard"]
 	path = src/drivers/cyphal/libcanard
@@ -53,9 +53,6 @@
 [submodule "src/lib/events/libevents"]
 	path = src/lib/events/libevents
 	url = https://github.com/mavlink/libevents.git
-[submodule "Tools/simulation-ignition"]
-	path = Tools/simulation-ignition
-	url = https://github.com/PX4/px4-simulation-ignition.git
 [submodule "src/lib/crypto/libtomcrypt"]
 	path = src/lib/crypto/libtomcrypt
 	url = https://github.com/PX4/libtomcrypt.git
@@ -2,10 +2,15 @@ CONFIG:
  default: px4_sitl_default
  choices:
    px4_sitl_default:
-      short: px4_sitl
+      short: px4_sitl_default
      buildType: RelWithDebInfo
      settings:
        CONFIG: px4_sitl_default
+    px4_sitl_ign:
+      short: px4_sitl_ign
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_ign
    px4_sitl_rtps:
      short: px4_sitl_rtps
      buildType: RelWithDebInfo
@@ -49,61 +49,6 @@
                "group": "test"
            }
        },
-        {
-            "label": "jmavsim build",
-            "type": "shell",
-            "command": "ant create_run_jar copy_res",
-            "options": {
-                "cwd": "${workspaceFolder}/Tools/jMAVSim"
-            },
-            "problemMatcher": [],
-            "presentation":{
-                "echo": true,
-                "reveal": "never",
-                "focus": false,
-                "panel": "shared",
-                "showReuseMessage": false,
-                "clear": false,
-            }
-        },
-        {
-            "label": "jmavsim",
-            "type": "shell",
-            "dependsOn": "jmavsim build",
-            "command": "java -Djava.ext.dirs= -jar jmavsim_run.jar -r 250 -lockstep -tcp localhost:4560 -qgc",
-            "options": {
-                "cwd": "${workspaceFolder}/Tools/jMAVSim/out/production",
-                "env": {
-                    "PX4_SIM_SPEED_FACTOR": "1"
-                }
-            },
-            "isBackground": true,
-            "presentation": {
-                "echo": true,
-                "reveal": "never",
-                "focus": false,
-                "panel": "shared",
-                "showReuseMessage": false,
-                "clear": false
-            },
-            "problemMatcher": [
-                {
-                    "pattern": [
-                        {
-                            "regexp": ".",
-                            "file": 1,
-                            "location": 2,
-                            "message": 3
-                        }
-                    ],
-                    "background": {
-                        "activeOnStart": true,
-                        "beginsPattern": ".",
-                        "endsPattern": ".",
-                    }
-                }
-            ]
-        },
        {
            "label": "jmavsim kill",
            "type": "shell",
@@ -116,7 +61,8 @@
                "showReuseMessage": false,
                "clear": false
            },
-            "problemMatcher": []
+            "problemMatcher": [],
+            "dependsOn":["px4_sitl_cleanup"]
        },
        {
            "label": "gazebo build",
@@ -143,11 +89,11 @@
                "cwd": "${workspaceFolder}",
                "env": {
                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "gzserver --verbose ${workspaceFolder}/Tools/sitl_gazebo/worlds/${input:gazeboWorld}.world",
+            "command": "gzserver --verbose ${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/worlds/${input:gazeboWorld}.world",
            "isBackground": true,
            "presentation": {
                "echo": true,
@@ -183,11 +129,11 @@
                "cwd": "${workspaceFolder}",
                "env": {
                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
+                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models",
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/sitl_gazebo/models/${input:vehicleModel}/${input:vehicleModel}.sdf --model-name=${input:vehicleModel} -x 1.01 -y 0.98 -z 0.83",
+            "command": "gz model --verbose --spawn-file=${workspaceFolder}/Tools/simulation/gazebo/sitl_gazebo/models/${input:gazeboModel}/${input:gazeboModel}.sdf --model-name=${input:gazeboModel} -x 1.01 -y 0.98 -z 0.83",
            "isBackground": false,
            "presentation": {
                "echo": true,
@@ -216,26 +162,26 @@
            ]
        },
        {
-            "label": "gazebo client",
+            "label": "ign gazebo",
            "type": "shell",
-            "dependsOn": "gazebo build",
            "options": {
                "cwd": "${workspaceFolder}",
                "env": {
-                    "GAZEBO_PLUGIN_PATH": "${workspaceFolder}/build/px4_sitl_default/build_gazebo",
-                    "GAZEBO_MODEL_PATH": "${workspaceFolder}/Tools/sitl_gazebo/models",
+                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/ignition/models",
                    "PX4_SIM_SPEED_FACTOR": "1"
                }
            },
-            "command": "gzclient --verbose",
+            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/ignition/worlds/${input:ignWorld}.sdf",
            "isBackground": true,
            "presentation": {
                "echo": true,
                "reveal": "never",
+                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "shared",
+                "panel": "dedicated",
                "showReuseMessage": false,
-                "clear": false
+                "clear": false,
+                "close": true
            },
            "problemMatcher": [
                {
@@ -258,29 +204,51 @@
        {
            "label": "gazebo kill",
            "type": "shell",
-            "command": "killall gzserver",
+            "command": "pkill -9 -f gzserver || true",
            "presentation": {
                "echo": true,
-                "reveal": "silent",
+                "reveal": "never",
+                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "shared",
+                "panel": "dedicated",
                "showReuseMessage": false,
-                "clear": false
+                "clear": false,
+                "close": true
            },
            "problemMatcher": [],
            "dependsOn":["px4_sitl_cleanup"]
        },
        {
-            "label": "px4_sitl_cleanup",
+            "label": "ign gazebo kill",
            "type": "shell",
-            "command": "rm -rfv /tmp/px4*",
+            "command": "pkill -9 -f ign || true",
            "presentation": {
                "echo": true,
-                "reveal": "silent",
+                "reveal": "never",
+                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "shared",
+                "panel": "dedicated",
                "showReuseMessage": false,
-                "clear": false
+                "clear": false,
+                "close": true
+            },
+            "problemMatcher": [],
+            "dependsOn":["px4_sitl_cleanup"]
+        },
+
+        {
+            "label": "px4_sitl_cleanup",
+            "type": "shell",
+            "command": "rm -rfv /tmp/px4* || true",
+            "presentation": {
+                "echo": true,
+                "reveal": "never",
+                "revealProblems": "onProblem",
+                "focus": false,
+                "panel": "dedicated",
+                "showReuseMessage": false,
+                "clear": false,
+                "close": true
            },
            "problemMatcher": [],
            "dependsOn":["px4_kill"]
@@ -288,14 +256,16 @@
        {
            "label": "px4_kill",
            "type": "shell",
-            "command": "killall px4 || true",
+            "command": "pkill -9 px4 || true",
            "presentation": {
                "echo": true,
-                "reveal": "silent",
+                "reveal": "never",
+                "revealProblems": "onProblem",
                "focus": false,
-                "panel": "shared",
+                "panel": "dedicated",
                "showReuseMessage": false,
-                "clear": false
+                "clear": false,
+                "close": true
            },
            "problemMatcher": []
        },
@@ -337,7 +307,16 @@
    "inputs": [
        {
            "type": "pickString",
-            "id": "vehicleModel",
+            "id": "ignWorld",
+            "description": "Ignition world",
+            "options": [
+                "default"
+            ],
+            "default": "default"
+        },
+        {
+            "type": "pickString",
+            "id": "gazeboModel",
            "description": "gazebo model",
            "options": [
              "iris",
@@ -296,7 +296,10 @@ if(${PX4_PLATFORM} STREQUAL "posix")
 	set(CMAKE_POSITION_INDEPENDENT_CODE ON)
 	set(CMAKE_ENABLE_EXPORTS ON)

-	include(coverage)
+	if(CMAKE_BUILD_TYPE MATCHES "Coverage")
+		include(coverage)
+	endif()
+
 	include(sanitizers)

 	# Define GNU standard installation directories
@@ -26,15 +26,15 @@ pipeline {
        //       echo $0;
        //       mkdir -p catkin_ws/src;
        //       cd catkin_ws;
-        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo
-        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/sitl_gazebo src/mavlink_sitl_gazebo;
+        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo
+        //       git clone --recursive ${WORKSPACE}/catkin_ws/src/Firmware/Tools/simulation/gazebo/sitl_gazebo src/mavlink_sitl_gazebo;
        //       git -C ${WORKSPACE}/catkin_ws/src/Firmware fetch --tags;
        //       source /opt/ros/melodic/setup.bash;
        //       export PYTHONPATH=/opt/ros/$ROS_DISTRO/lib/python2.7/dist-packages:/usr/lib/python2.7/dist-packages:/usr/local/lib/python2.7/dist-packages;
        //       catkin init;
        //       catkin build -j$(nproc) -l$(nproc);
        //     '''
-        //     // test if the binary was correctly installed and runs using 'mavros_posix_silt.launch'
+        //     // test if the binary was correctly installed and runs using 'mavros_posix_sitl.launch'
        //     sh '''#!/bin/bash -l
        //       echo $0;
        //       source catkin_ws/devel/setup.bash;
@@ -68,7 +68,7 @@ pipeline {
              unset ROS_DISTRO;
              mkdir -p colcon_ws/src;
              cd colcon_ws;
-              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/sitl_gazebo;
+              git -C ${WORKSPACE}/colcon_ws/src/Firmware submodule update --init --recursive --force Tools/simulation/gazebo/sitl_gazebo;
              git -C ${WORKSPACE}/colcon_ws/src/Firmware fetch --tags;
              source /opt/ros/foxy/setup.sh;
              colcon build --event-handlers console_direct+ --symlink-install;
@@ -129,57 +129,59 @@ else
 	BUILD_DIR_SUFFIX :=
 endif

+CMAKE_ARGS ?=
+
 # additional config parameters passed to cmake
 ifdef EXTERNAL_MODULES_LOCATION
-	CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
+	override CMAKE_ARGS += -DEXTERNAL_MODULES_LOCATION:STRING=$(EXTERNAL_MODULES_LOCATION)
 endif

 ifdef PX4_CMAKE_BUILD_TYPE
-	CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
+	override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=${PX4_CMAKE_BUILD_TYPE}
 else

 	# Address Sanitizer
 	ifdef PX4_ASAN
-		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
+		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=AddressSanitizer
 	endif

 	# Memory Sanitizer
 	ifdef PX4_MSAN
-		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
+		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=MemorySanitizer
 	endif

 	# Thread Sanitizer
 	ifdef PX4_TSAN
-		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
+		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=ThreadSanitizer
 	endif

 	# Undefined Behavior Sanitizer
 	ifdef PX4_UBSAN
-		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
+		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif

 	# Fuzz Testing
 	ifdef PX4_FUZZ
-		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
+		override CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
 	endif

 endif

 # Pick up specific Python path if set
 ifdef PYTHON_EXECUTABLE
-	CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
+	override CMAKE_ARGS += -DPYTHON_EXECUTABLE=${PYTHON_EXECUTABLE}
 endif

 # Check if the microRTPS agent is to be built
 ifdef BUILD_MICRORTPS_AGENT
-  CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
+  override CMAKE_ARGS += -DBUILD_MICRORTPS_AGENT=ON
 endif

 # Functions
 # --------------------------------------------------------------------
 # describe how to build a cmake config
 define cmake-build
-	$(eval CMAKE_ARGS += -DCONFIG=$(1))
+	$(eval override CMAKE_ARGS += -DCONFIG=$(1))
 	@$(eval BUILD_DIR = "$(SRC_DIR)/build/$(1)")
 	@# check if the desired cmake configuration matches the cache then CMAKE_CACHE_CHECK stays empty
 	@$(call cmake-cache-check)
@@ -314,7 +316,9 @@ uorb_graphs:
 	@$(MAKE) --no-print-directory px4_fmu-v5_default uorb_graph
 	@$(MAKE) --no-print-directory px4_sitl_default uorb_graph

-px4io_update: px4_io-v2_default cubepilot_io-v2_default
+px4io_update:
+	@$(MAKE) --no-print-directory px4_io-v2_default
+	@$(MAKE) --no-print-directory cubepilot_io-v2_default
 	# px4_io-v2_default
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
@@ -381,7 +385,7 @@ format:
 .PHONY: rostest python_coverage

 tests:
-	$(eval CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
+	$(eval override CMAKE_ARGS += -DTESTFILTER=$(TESTFILTER))
 	$(eval ARGS += test_results)
 	$(eval ASAN_OPTIONS += color=always:check_initialization_order=1:detect_stack_use_after_return=1)
 	$(eval UBSAN_OPTIONS += color=always)
@@ -35,6 +35,5 @@ add_subdirectory(init.d)
 add_subdirectory(mixers)
 # TODO: make this configurable from the board config, or better combine
 if("${PX4_BOARD}" MATCHES "sitl")
-	add_subdirectory(mixers-sitl)
 	add_subdirectory(init.d-posix)
 endif()
@@ -9,8 +9,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default SYS_CTRL_ALLOC 1
-

 param set-default CA_AIRFRAME 0

@@ -33,5 +31,3 @@ param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104

-set MIXER skip
-set MIXER_AUX none
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL
-#
-# @type Quadrotor Wide
-#
-# @maintainer Julian Oes <julian@oes.ch>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_w
@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL
+#
+# @type Quadrotor Wide
+#
+# @maintainer Julian Oes <julian@oes.ch>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=jmavsim}
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (foggy_lidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+param set-default EKF2_RNG_A_HMAX 10
+
@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (foggy_lidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-param set-default EKF2_RNG_A_HMAX 10
-
@@ -9,8 +9,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-param set-default SYS_CTRL_ALLOC 1
-

 param set-default CA_AIRFRAME 0

@@ -97,5 +95,3 @@ param set-default CA_METHOD 0
 param set-default FD_FAIL_P 0
 param set-default FD_FAIL_R 0

-set MIXER skip
-set MIXER_AUX none
@@ -1,19 +0,0 @@
-#!/bin/sh
-#
-# @name IF750A SITL
-# InspiredFlight 750 Auterion edition. Gazebo Only.
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-# EKF2: Multi GPS blending (as the model has 2 GPS's)
-param set-default SENS_GPS_MASK 7
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 4
-param set-default MNT_MODE_OUT 2
-param set-default MNT_DO_STAB 2
-
-set MIXER quad_x
@@ -0,0 +1,15 @@
+#!/bin/sh
+#
+# @name PX4Vision SITL
+# Holybro px4vision. Gazebo Only.
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/airframes/4016_holybro_px4vision
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name PX4Vision SITL
-# Holybro px4vision. Gazebo Only.
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/airframes/4016_holybro_px4vision
-
-set MIXER quad_x
@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-# @name QuadrotorX SITL for SIH
-#
-# @type Quadrotor
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_x
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set SIH_VEHICLE_TYPE 0
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# @name QuadrotorX SITL for SIH
+#
+# @type Quadrotor
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=quadx}
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+param set SIH_VEHICLE_TYPE 0
@@ -1,33 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL for SIH
-#
-# @type Plane
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.fw_defaults
-
-set MIXER AERT
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 6.0
-param set SIH_MASS 0.3
-param set SIH_IXX 0.00402
-param set SIH_IYY 0.0144
-param set SIH_IZZ 0.0177
-param set SIH_IXZ 0.00046
-param set SIH_KDV 0.2
-
-param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
-param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
@@ -0,0 +1,51 @@
+#!/bin/sh
+#
+# @name Plane SITL for SIH
+#
+# @type Plane
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+
+. ${R}etc/init.d/rc.fw_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=airplane}
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set-default SIH_T_MAX 6.0
+param set-default SIH_MASS 0.3
+param set-default SIH_IXX 0.00402
+param set-default SIH_IYY 0.0144
+param set-default SIH_IZZ 0.0177
+param set-default SIH_IXZ 0.00046
+param set-default SIH_KDV 0.2
+
+param set-default SIH_VEHICLE_TYPE 1 	# sih as fixed wing
+param set-default RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)
+
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_P 1.0
+param set-default CA_SV_CS1_TYPE 3
+param set-default CA_SV_CS2_TRQ_Y 1.0
+param set-default CA_SV_CS2_TYPE 4
+param set-default PWM_MAIN_FUNC3 201
+param set-default PWM_MAIN_FUNC4 202
+param set-default PWM_MAIN_FUNC5 203
+param set-default PWM_MAIN_FUNC6 101
@@ -0,0 +1,69 @@
+#!/bin/sh
+#
+# @name SIH Tailsitter Duo
+#
+# @type VTOL
+#
+# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=sihsim}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=xvert}
+
+param set-default VT_ELEV_MC_LOCK 0
+param set-default VT_TYPE 0
+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.3
+param set-default MPC_MAN_Y_MAX 60
+param set-default MC_PITCH_P 5
+
+param set-default MAV_TYPE 19
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default BAT_N_CELLS 3
+
+param set-default SIH_T_MAX 2.0
+param set-default SIH_Q_MAX 0.0165
+param set-default SIH_MASS 0.2
+# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
+param set-default SIH_IXX 0.00354
+param set-default SIH_IYY 0.000625
+param set-default SIH_IZZ 0.00300
+param set-default SIH_IXZ 0.0
+param set-default SIH_KDV 0.2
+param set-default SIH_L_ROLL 0.145
+
+# sih as tailsitter
+param set-default SIH_VEHICLE_TYPE 2
+
+param set-default CA_AIRFRAME 4
+
+param set-default CA_ROTOR_COUNT 2
+param set-default CA_ROTOR0_PX 0
+param set-default CA_ROTOR0_PY 2
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX 0
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_KM 0.05
+
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y 0.5
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC5 201
+param set-default PWM_MAIN_FUNC6 202
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-# @name SIH Tailsitter Duo
-#
-# @type VTOL
-#
-# @maintainer Romain Chiappinelli <romain.chiap@gmail.com>
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default VT_ELEV_MC_LOCK 0
-param set-default VT_TYPE 0
-param set-default VT_FW_DIFTHR_EN 1
-param set-default VT_FW_DIFTHR_SC 0.3
-param set-default MPC_MAN_Y_MAX 60
-param set-default MC_PITCH_P 5
-
-param set-default MAV_TYPE 19
-set MAV_TYPE 19
-set MIXER vtol_tailsitter_duo_sat
-
-# disable some checks to allow to fly:
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-param set-default BAT_N_CELLS 3
-
-param set SIH_T_MAX 2.0
-param set SIH_Q_MAX 0.0165
-param set SIH_MASS 0.2
-# IXX and IZZ are inverted from the thesis as the body frame is pitched by 90 deg
-param set SIH_IXX 0.00354
-param set SIH_IYY 0.000625
-param set SIH_IZZ 0.00300
-param set SIH_IXZ 0.0
-param set SIH_KDV 0.2
-param set SIH_L_ROLL 0.145
-
-# sih as tailsitter
-param set SIH_VEHICLE_TYPE 2
@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+param set-default EKF2_EVP_NOISE 0.05
+param set-default EKF2_EVA_NOISE 0.05
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
+
+param set-default SENS_FLOW_ROT 6
+param set-default SENS_FLOW_MINHGT 0.7
+param set-default SENS_FLOW_MAXHGT 3.0
+param set-default SENS_FLOW_MAXR 2.5
@@ -1,24 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-param set-default EKF2_EVP_NOISE 0.05
-param set-default EKF2_EVA_NOISE 0.05
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
-
-param set-default SENS_FLOW_ROT 6
-param set-default SENS_FLOW_MINHGT 0.7
-param set-default SENS_FLOW_MAXHGT 3.0
-param set-default SENS_FLOW_MAXR 2.5
@@ -0,0 +1,38 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (irlock)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# enable fusion of landing target velocity
+param set-default LTEST_MODE 1
+param set-default PLD_HACC_RAD 0.1
+param set-default RTL_PLD_MD 2
+
+# Start up Landing Target Estimator module
+landing_target_estimator start
@@ -1,16 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (irlock)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# enable fusion of landing target velocity
-param set-default LTEST_MODE 1
-param set-default PLD_HACC_RAD 0.1
-param set-default RTL_PLD_MD 2
-
-# Start up Landing Target Estimator module
-landing_target_estimator start
@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (rplidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+param set-default LPE_FUSION 242
+
@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (rplidar)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-param set-default LPE_FUSION 242
-
@@ -0,0 +1,42 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Vision)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2: Vision position and heading
+param set-default EKF2_AID_MASK 24
+param set-default EKF2_EV_DELAY 5
+param set-default EKF2_GPS_CTRL 0
+
+# LPE: Vision + baro
+param set-default LPE_FUSION 132
+
+# AEQ: External heading set to use vision input
+param set-default ATT_EXT_HDG_M 1
+
@@ -1,19 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Vision)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2: Vision position and heading
-param set-default EKF2_AID_MASK 24
-param set-default EKF2_EV_DELAY 5
-
-# LPE: Vision + baro
-param set-default LPE_FUSION 132
-
-# AEQ: External heading set to use vision input
-param set-default ATT_EXT_HDG_M 1
-
@@ -1,13 +0,0 @@
-#!/bin/sh
-#
-# @name Solo
-#
-# @type Quadrotor
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_PITCHRATE_P 0.1
-param set-default MC_ROLLRATE_P 0.05
-
-set MIXER quad_x
@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+param set-default COM_OBS_AVOID 1
+param set-default MPC_XY_CRUISE 5.0
+
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Obstacle Avoidance)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-param set-default COM_OBS_AVOID 1
-param set-default MPC_XY_CRUISE 5.0
-
@@ -0,0 +1,40 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Optical Flow)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_GPS_CTRL 0
+
+# LPE: Flow-only mode
+param set-default LPE_FUSION 242
+param set-default LPE_FAKE_ORIGIN 1
+
+param set-default MPC_ALT_MODE 2
@@ -1,17 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Optical Flow)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2
-param set-default EKF2_AID_MASK 2
-
-# LPE: Flow-only mode
-param set-default LPE_FUSION 242
-param set-default LPE_FAKE_ORIGIN 1
-
-param set-default MPC_ALT_MODE 2
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Vision Velocity)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2: Vision velocity and heading
-param set-default EKF2_AID_MASK 272
-param set-default EKF2_EV_DELAY 5
@@ -0,0 +1,33 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (Dual GPS)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
+# EKF2: Multi GPS blending
+param set-default SENS_GPS_MASK 7
@@ -1,11 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor SITL (Dual GPS)
-#
-# @type Quadrotor Wide
-#
-
-. ${R}etc/init.d-posix/airframes/10016_iris
-
-# EKF2: Multi GPS blending
-param set-default SENS_GPS_MASK 7
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name UUV
-#
-
-. ${R}etc/init.d/rc.uuv_defaults
-
-# disable circuit breaker for airspeed sensor
-param set-default CBRK_AIRSPD_CHK 162128
-
-set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
-set MIXER custom
@@ -0,0 +1,47 @@
+#!/bin/sh
+#
+# @name Hippocampus UUV
+#
+
+. ${R}etc/init.d/rc.uuv_defaults
+
+# disable circuit breaker for airspeed sensor
+param set-default CBRK_AIRSPD_CHK 162128
+
+param set-default CA_AIRFRAME 7
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_R_REV 255
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY 0.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.0000
+param set-default CA_ROTOR0_PY -0.3000
+param set-default CA_ROTOR0_PZ -0.3000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 0.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.0000
+param set-default CA_ROTOR1_PY 0.3000
+param set-default CA_ROTOR1_PZ -0.3000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 0.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX 0.0000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.3000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY 0.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX 0.0000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.3000
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Hippocampus UUV
-#
-
-. ${R}etc/init.d/rc.uuv_defaults
-
-# disable circuit breaker for airspeed sensor
-param set-default CBRK_AIRSPD_CHK 162128
-
-set MIXER_FILE etc/mixers-sitl/uuv_x_sitl.main.mix
-set MIXER custom
@@ -8,7 +8,6 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 7

 param set-default CA_ROTOR_COUNT 8
@@ -66,4 +65,3 @@ param set-default PWM_MAIN_FUNC6 106
 param set-default PWM_MAIN_FUNC7 107
 param set-default PWM_MAIN_FUNC8 108

-set MIXER skip
@@ -0,0 +1,77 @@
+#!/bin/sh
+#
+# @name Plane SITL
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+
@@ -0,0 +1,81 @@
+#!/bin/sh
+#
+# @name Plane SITL with camera
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+# Camera trigger interface is MAVLink
+param set-default TRIG_INTERFACE 3
+
+# Distance trigger mode enabled
+param set-default TRIG_MODE 4
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with camera
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-# Camera trigger interface is MAVLink
-param set-default TRIG_INTERFACE 3
-
-# Distance trigger mode enabled
-param set-default TRIG_MODE 4
@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+param set-default RWTO_TKOFF 0
+
@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-param set-default RWTO_TKOFF 0
-
@@ -0,0 +1,66 @@
+#!/bin/sh
+#
+# @name Plane SITL
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default FW_LND_AIRSPD_SC 1.1
+param set-default FW_LND_ANG 5
+param set-default FW_LND_FL_PMIN 9.5
+param set-default FW_LND_FL_PMAX 20
+param set-default FW_LND_FLALT 5
+
+param set-default FW_L1_PERIOD 25
+
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
+
+param set-default FW_R_TC 0.45
+param set-default FW_RR_FF 0.40
+param set-default FW_RR_I 0.132
+param set-default FW_RR_P 0.085
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 20
+param set-default MIS_DIST_1WP 2500
+param set-default MIS_DIST_WPS 10000
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default RWTO_MAX_PITCH 20
+
+param set-default RWTO_PSP 8
+param set-default RWTO_AIRSPD_SCL 1.8
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with downward facing LIDAR.
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-param set-default FW_LND_USETER 1
-
@@ -39,5 +39,27 @@ param set-default RWTO_MAX_PITCH 20
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
@@ -0,0 +1,62 @@
+#!/bin/sh
+#
+# @name Plane SITL
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 15
+
+param set-default FW_P_TC 0.5
+param set-default FW_PR_FF 0.40
+param set-default FW_PR_I 0.05
+param set-default FW_PR_P 0.05
+
+param set-default FW_R_TC 0.7
+param set-default FW_RR_FF 0.20
+param set-default FW_RR_I 0.02
+param set-default FW_RR_P 0.22
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
@@ -1,39 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 15
-
-param set-default FW_P_TC 0.5
-param set-default FW_PR_FF 0.40
-param set-default FW_PR_I 0.05
-param set-default FW_PR_P 0.05
-
-param set-default FW_R_TC 0.7
-param set-default FW_RR_FF 0.20
-param set-default FW_RR_I 0.02
-param set-default FW_RR_P 0.22
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default RWTO_TKOFF 1
-
-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom
@@ -33,12 +33,32 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
-
 param set-default RWTO_MAX_PITCH 20
-
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256

-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom
@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default EKF2_MAG_ACCLIM 0
-param set-default EKF2_MAG_YAWLIM 0
-
-param set-default FW_LND_AIRSPD_SC 1
-param set-default FW_LND_ANG 8
-
-param set-default FW_L1_PERIOD 12
-
-param set-default FW_PR_P 0.9
-param set-default FW_PR_FF 0.2
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_THR_TRIM 0.25
-
-param set-default FW_T_ALT_TC 2
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_HRATE_FF 0.5
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-param set-default FW_T_TAS_TC 2
-
-param set-default FW_W_EN 1
-
-param set-default MIS_LTRMIN_ALT 30
-param set-default MIS_TAKEOFF_ALT 30
-
-param set-default NAV_ACC_RAD 15
-param set-default NAV_DLL_ACT 2
-
-param set-default FW_USE_NPFG 1
-
-param set-default RWTO_TKOFF 1
-
-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom
@@ -21,15 +21,16 @@ param set-default FW_P_LIM_MIN -15
 param set-default FW_RR_FF 0.1
 param set-default FW_RR_P 0.3

-param set-default FW_SPOILERS_LND 0.4
-
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
 param set-default FW_THR_TRIM 0.25

+param set-default FW_T_ALT_TC 2
 param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_HRATE_FF 0.5
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
+param set-default FW_T_TAS_TC 2

 param set-default FW_W_EN 1

@@ -39,9 +40,10 @@ param set-default MIS_TAKEOFF_ALT 30
 param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

+param set-default FW_USE_NPFG 1
+
 param set-default RWTO_TKOFF 1

-#param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 1

 param set-default CA_ROTOR_COUNT 1
@@ -67,6 +69,3 @@ param set-default PWM_MAIN_FUNC8 203
 param set-default PWM_MAIN_FUNC9 206
 param set-default PWM_MAIN_REV 256

-
-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom
@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# @name Plane SITL with catapult
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+param set-default FW_THR_TRIM 0.0
+param set-default RWTO_TKOFF 0
@@ -1,9 +0,0 @@
-#!/bin/sh
-#
-# @name Plane SITL with catapult
-#
-
-. ${R}etc/init.d-posix/airframes/1030_plane
-
-param set-default FW_THR_TRIM 0.0
-param set-default RWTO_TKOFF 0
@@ -33,9 +33,33 @@ param set-default NAV_ACC_RAD 15
 param set-default NAV_DLL_ACT 2

 param set-default RWTO_TKOFF 1
+
 param set-default RWTO_MAX_PITCH 20
+
 param set-default RWTO_PSP 8
 param set-default RWTO_AIRSPD_SCL 1.8

-set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
-set MIXER custom
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
@@ -12,7 +12,6 @@
 param set-default FD_ACT_EN 0
 param set-default FD_ACT_MOT_TOUT 500

-# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 2

 param set-default CA_ROTOR_COUNT 5
@@ -82,5 +81,3 @@ param set-default VT_FW_MOT_OFFID 1234
 param set-default VT_B_TRANS_DUR 8
 param set-default VT_TYPE 2

-set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
-set MIXER custom
@@ -9,7 +9,6 @@

 param set-default MAV_TYPE 20

-# param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 4

 param set-default CA_ROTOR_COUNT 4
@@ -77,5 +76,3 @@ param set-default VT_TYPE 0

 param set-default WV_EN 0

-set MIXER_FILE etc/mixers-sitl/quad_x_vtol.main.mix
-set MIXER custom
@@ -9,7 +9,6 @@

 param set-default MAV_TYPE 21

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 3

 param set-default CA_ROTOR_COUNT 4
@@ -27,7 +26,7 @@ param set-default CA_ROTOR3_PY 0.1875
 param set-default CA_ROTOR3_KM -0.05

 param set-default CA_ROTOR0_TILT 1
-param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR2_TILT 2
 param set-default CA_SV_CS0_TRQ_R -0.5
 param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
@@ -37,9 +36,7 @@ param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
 param set-default CA_SV_TL0_CT 0
 param set-default CA_SV_TL1_CT 0
-param set-default CA_SV_TL2_CT 0
-param set-default CA_SV_TL3_CT 0
-param set-default CA_SV_TL_COUNT 4
+param set-default CA_SV_TL_COUNT 2

 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102
@@ -47,11 +44,9 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 204
 param set-default PWM_MAIN_FUNC6 205
-param set-default PWM_MAIN_FUNC7 206
-param set-default PWM_MAIN_FUNC8 207
-param set-default PWM_MAIN_FUNC9 201
-param set-default PWM_MAIN_FUNC10 202
-param set-default PWM_MAIN_FUNC11 203
+param set-default PWM_MAIN_FUNC7 201
+param set-default PWM_MAIN_FUNC8 202
+param set-default PWM_MAIN_FUNC9 203

 param set-default FW_L1_PERIOD 12
 param set-default FW_PR_FF 0.2
@@ -67,23 +62,17 @@ param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2

-param set-default MC_YAW_P 1.6
+param set-default MC_YAWRATE_P 0.3
+param set-default MC_YAWRATE_I 0.3

-param set-default MIS_TAKEOFF_ALT 10
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_XY_P 0.8
 param set-default MPC_XY_VEL_P_ACC 3
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_D_ACC 0.1

-param set-default NAV_ACC_RAD 5
+param set-default MIS_TAKEOFF_ALT 10

 param set-default VT_B_TRANS_DUR 8
 param set-default VT_FWD_THRUST_EN 4
-param set-default VT_MOT_ID 1234
+param set-default VT_FWD_THRUST_SC 0.6
 param set-default VT_TILT_TRANS 0.6
 param set-default VT_TYPE 1
-
-set MIXER_FILE etc/mixers-sitl/tiltrotor_sitl.main.mix
-set MIXER custom
@@ -0,0 +1,93 @@
+#!/bin/sh
+#
+# @name Standard VTOL
+#
+# @type Standard VTOL
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+# TODO: Enable motor failure detection when the
+# VTOL no longer reports 0A for all ESCs in SITL
+param set-default FD_ACT_EN 0
+param set-default FD_ACT_MOT_TOUT 500
+
+param set-default CA_AIRFRAME 2
+
+param set-default CA_ROTOR_COUNT 5
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+param set-default CA_ROTOR4_AX 1.0
+param set-default CA_ROTOR4_AZ 0.0
+param set-default CA_ROTOR4_PX 0.2
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+
+param set-default FW_L1_PERIOD 12
+param set-default FW_PR_FF 0.2
+param set-default FW_PR_P 0.9
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+param set-default FW_RR_FF 0.1
+param set-default FW_RR_P 0.3
+param set-default FW_THR_TRIM 0.25
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default MC_ROLLRATE_P 0.3
+param set-default MC_YAW_P 1.6
+
+param set-default MIS_TAKEOFF_ALT 10
+
+param set-default MPC_ACC_HOR_MAX 2
+param set-default MPC_XY_P 0.8
+param set-default MPC_XY_VEL_P_ACC 3
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_D_ACC 0.1
+
+param set-default NAV_ACC_RAD 5
+
+param set-default VT_FWD_THRUST_EN 4
+param set-default VT_F_TRANS_THR 0.75
+param set-default VT_MOT_ID 1234
+param set-default VT_FW_MOT_OFFID 1234
+param set-default VT_B_TRANS_DUR 8
+param set-default VT_TYPE 2
+
+
+# Gimbal
+param set-default PWM_MAIN_FUNC9 420
+param set-default PWM_MAIN_FUNC10 421
+param set-default PWM_MAIN_FUNC11 422
+
+param set-default RC_MAP_AUX1 8
+param set-default RC_MAP_AUX2 9
+param set-default RC_MAP_AUX3 10
+
@@ -1,52 +0,0 @@
-#!/bin/sh
-#
-# @name Standard VTOL
-#
-# @type Standard VTOL
-#
-
-. ${R}etc/init.d/rc.vtol_defaults
-
-param set-default FW_L1_PERIOD 12
-param set-default FW_PR_FF 0.2
-param set-default FW_PR_P 0.9
-param set-default FW_PSP_OFF 2
-param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_FF 0.1
-param set-default FW_RR_P 0.3
-param set-default FW_THR_TRIM 0.25
-param set-default FW_THR_MAX 0.6
-param set-default FW_THR_MIN 0.05
-param set-default FW_T_ALT_TC 2
-param set-default FW_T_CLMB_MAX 8
-param set-default FW_T_HRATE_FF 0.5
-param set-default FW_T_SINK_MAX 2.7
-param set-default FW_T_SINK_MIN 2.2
-param set-default FW_T_TAS_TC 2
-
-param set-default MC_ROLLRATE_P 0.3
-param set-default MC_YAW_P 1.6
-
-param set-default MIS_TAKEOFF_ALT 10
-
-param set-default MPC_ACC_HOR_MAX 2
-param set-default MPC_XY_P 0.8
-param set-default MPC_XY_VEL_P_ACC 3
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_D_ACC 0.1
-
-param set-default NAV_ACC_RAD 5
-
-param set-default VT_FWD_THRUST_EN 4
-param set-default VT_F_TRANS_THR 0.75
-param set-default VT_MOT_ID 1234
-param set-default VT_FW_MOT_OFFID 1234
-param set-default VT_B_TRANS_DUR 8
-param set-default VT_TYPE 2
-
-param set-default RC_MAP_AUX1 8
-param set-default RC_MAP_AUX2 9
-param set-default RC_MAP_AUX3 10
-
-set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
-set MIXER custom
@@ -1 +0,0 @@
-mixer append /dev/pwm_output0 etc/mixers-sitl/package_drop.aux.mix
@@ -0,0 +1,78 @@
+#!/bin/sh
+#
+# @name Plane SITL with downward facing LIDAR.
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_PR_P 0.9
+param set-default FW_PR_FF 0.5
+param set-default FW_PR_I 0.5
+param set-default TRIM_PITCH -0.15
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_RR_FF 0.5
+param set-default FW_RR_P 0.3
+param set-default FW_RR_I 0.5
+
+param set-default FW_YR_FF 0.5
+param set-default FW_YR_P 0.6
+param set-default FW_YR_I 0.5
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MAX 0.6
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+
+param set-default FW_LND_USETER 1
@@ -28,7 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 5

 param set-default CA_R_REV 1
@@ -37,4 +36,3 @@ param set-default PWM_MAIN_FUNC2 201
 param set-default PWM_MAIN_FUNC6 101
 param set-default PWM_MAIN_FUNC7 101

-set MIXER_FILE skip
@@ -28,7 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 6

 param set-default CA_R_REV 3
@@ -37,4 +36,3 @@ param set-default PWM_MAIN_FUNC2 101
 param set-default PWM_MAIN_FUNC6 102
 param set-default PWM_MAIN_FUNC7 102

-set MIXER_FILE skip
@@ -35,4 +35,11 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 3.0

-set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
+param set-default CA_AIRFRAME 5
+
+param set-default CA_R_REV 1
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 201
+param set-default PWM_MAIN_FUNC6 101
+param set-default PWM_MAIN_FUNC7 101
+
@@ -28,7 +28,6 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 9

 param set-default CA_ROTOR_COUNT 2
@@ -47,4 +46,3 @@ param set-default CA_R_REV 3
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

-set MIXER skip
@@ -44,5 +44,25 @@ param set-default FW_THR_TRIM 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0

-set MIXER_FILE etc/mixers-sitl/autogyro_sitl.main.mix
-set MIXER custom
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 0
+param set-default CA_SV_CS0_TRQ_Y 1
+param set-default CA_SV_CS0_TYPE 4
+param set-default CA_SV_CS1_TRQ_P 0
+param set-default CA_SV_CS1_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 1
+param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TYPE 3
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 101
+param set-default PWM_MAIN_FUNC3 202
+param set-default PWM_MAIN_FUNC4 203
+param set-default PWM_MAIN_FUNC5 407
+param set-default PWM_MAIN_FUNC6 408
+param set-default PWM_MAIN_FUNC7 409
+
@@ -50,5 +50,25 @@ param set-default FW_THR_CRUISE 0.8
 param set-default FW_THR_IDLE 0
 param set-default COM_DISARM_PRFLT 0

-set MIXER_FILE etc/mixers-sitl/autogyro_sitl.main.mix
-set MIXER custom
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R 0
+param set-default CA_SV_CS0_TRQ_Y 1
+param set-default CA_SV_CS0_TYPE 4
+param set-default CA_SV_CS1_TRQ_P 0
+param set-default CA_SV_CS1_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 1
+param set-default CA_SV_CS2_TRQ_P 1
+param set-default CA_SV_CS2_TYPE 3
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 101
+param set-default PWM_MAIN_FUNC3 202
+param set-default PWM_MAIN_FUNC4 203
+param set-default PWM_MAIN_FUNC5 407
+param set-default PWM_MAIN_FUNC6 408
+param set-default PWM_MAIN_FUNC7 409
+
@@ -11,7 +11,6 @@

 . ${R}etc/init.d/rc.airship_defaults

-param set-default SYS_CTRL_ALLOC 1
 param set-default CA_AIRFRAME 9

 param set-default CA_ROTOR_COUNT 3
@@ -38,4 +37,3 @@ param set-default PWM_MAIN_FUNC2 102
 param set-default PWM_MAIN_FUNC3 201
 param set-default PWM_MAIN_FUNC4 103

-set MIXER skip
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# @name Quadrotor SITL model for JSBSim
+#
+# @type Quadrotor Wide
+#
+# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+
+param set-default CA_AIRFRAME 0
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
@@ -1,12 +0,0 @@
-#!/bin/sh
-#
-# @name Quadrotor SITL model for JSBSim
-#
-# @type Quadrotor Wide
-#
-# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-set MIXER quad_w
@@ -1,29 +0,0 @@
-#!/bin/sh
-#
-# @name Hexacopter SITL model for JSBSim
-#
-# @type Hexarotor x
-#
-# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MAV_TYPE 13
-
-param set-default MC_PITCHRATE_P 0.1
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCH_P 6.0
-param set-default MC_ROLLRATE_I 0.1
-param set-default MC_ROLL_P 6.0
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_P_ACC 3
-
-param set-default RTL_DESCEND_ALT 10
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 4
-param set-default MNT_DO_STAB 2
-
-set MIXER hexa_x
@@ -0,0 +1,54 @@
+#!/bin/sh
+#
+# @name Hexacopter SITL model for JSBSim
+#
+# @type Hexarotor x
+#
+# @maintainer Jaeyoung Lim <jaeyoung@auterion.com>
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+param set-default MAV_TYPE 13
+
+param set-default MC_PITCHRATE_P 0.1
+param set-default MC_PITCHRATE_I 0.05
+param set-default MC_PITCH_P 6.0
+param set-default MC_ROLLRATE_I 0.1
+param set-default MC_ROLL_P 6.0
+param set-default MPC_XY_VEL_I_ACC 4
+param set-default MPC_XY_VEL_P_ACC 3
+
+param set-default RTL_DESCEND_ALT 10
+
+param set-default TRIG_INTERFACE 3
+param set-default TRIG_MODE 4
+param set-default MNT_MODE_IN 4
+param set-default MNT_DO_STAB 2
+
+
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.866025
+param set-default CA_ROTOR2_PY -0.5
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.866025
+param set-default CA_ROTOR3_PY 0.5
+param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR4_PX 0.866025
+param set-default CA_ROTOR4_PY 0.5
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR5_PX -0.866025
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR5_KM -0.05
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
@@ -0,0 +1,50 @@
+#!/bin/sh
+#
+# @name Ignition Gazebo X3
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500}
+PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 4
+
+param set-default CA_ROTOR0_PX 0.13
+param set-default CA_ROTOR0_PY 0.22
+param set-default CA_ROTOR0_KM  0.05
+
+param set-default CA_ROTOR1_PX -0.13
+param set-default CA_ROTOR1_PY -0.20
+param set-default CA_ROTOR1_KM  0.05
+
+param set-default CA_ROTOR2_PX 0.13
+param set-default CA_ROTOR2_PY -0.22
+param set-default CA_ROTOR2_KM -0.05
+
+param set-default CA_ROTOR3_PX -0.13
+param set-default CA_ROTOR3_PY 0.20
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default SIM_IGN_FUNC1 101
+param set-default SIM_IGN_FUNC2 102
+param set-default SIM_IGN_FUNC3 103
+param set-default SIM_IGN_FUNC4 104
+
+param set-default SIM_IGN_MIN1 150
+param set-default SIM_IGN_MIN2 150
+param set-default SIM_IGN_MIN3 150
+param set-default SIM_IGN_MIN4 150
+
+param set-default SIM_IGN_MAX1 1000
+param set-default SIM_IGN_MAX2 1000
+param set-default SIM_IGN_MAX3 1000
+param set-default SIM_IGN_MAX4 1000
+
+param set-default MPC_THR_HOVER 0.60
@@ -0,0 +1,80 @@
+#!/bin/sh
+#
+# @name Ignition Gazebo X4
+#
+# @type Quadrotor
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
+PX4_SIM_MODEL=${PX4_SIM_MODEL:=x4}
+PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
+
+param set-default SYS_CTRL_ALLOC 1
+
+param set-default CA_AIRFRAME 0
+param set-default CA_ROTOR_COUNT 6
+
+param set-default CA_ROTOR0_PX  0.25
+param set-default CA_ROTOR0_PY -0.15
+param set-default CA_ROTOR0_KM  0.05
+
+param set-default CA_ROTOR1_PX  0.00
+param set-default CA_ROTOR1_PY -0.29
+param set-default CA_ROTOR1_KM -0.05
+
+param set-default CA_ROTOR2_PX -0.25
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM  0.05
+
+param set-default CA_ROTOR3_PX -0.25
+param set-default CA_ROTOR3_PY  0.15
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_ROTOR4_PX  0.00
+param set-default CA_ROTOR4_PY  0.29
+param set-default CA_ROTOR4_KM  0.05
+
+param set-default CA_ROTOR5_PX  0.25
+param set-default CA_ROTOR5_PY  0.15
+param set-default CA_ROTOR5_KM -0.05
+
+param set-default SIM_IGN_FUNC1 101
+param set-default SIM_IGN_FUNC2 102
+param set-default SIM_IGN_FUNC3 103
+param set-default SIM_IGN_FUNC4 104
+param set-default SIM_IGN_FUNC5 105
+param set-default SIM_IGN_FUNC6 106
+
+param set-default SIM_IGN_MIN1 150
+param set-default SIM_IGN_MIN2 150
+param set-default SIM_IGN_MIN3 150
+param set-default SIM_IGN_MIN4 150
+param set-default SIM_IGN_MIN5 150
+param set-default SIM_IGN_MIN6 150
+
+param set-default SIM_IGN_MAX1 1000
+param set-default SIM_IGN_MAX2 1000
+param set-default SIM_IGN_MAX3 1000
+param set-default SIM_IGN_MAX4 1000
+param set-default SIM_IGN_MAX5 1000
+param set-default SIM_IGN_MAX6 1000
+
+
+param set-default MC_PITCHRATE_D 0.0016
+param set-default MC_PITCHRATE_I 0.2500
+param set-default MC_PITCHRATE_P 0.1831
+param set-default MC_PITCH_P 5.216
+
+param set-default MC_ROLLRATE_D 0.0022
+param set-default MC_ROLLRATE_I 0.2095
+param set-default MC_ROLLRATE_P 0.1570
+param set-default MC_ROLL_P 6.081
+
+param set-default MC_YAWRATE_D 0.0009
+param set-default MC_YAWRATE_I 0.1800
+param set-default MC_YAWRATE_P 0.1773
+param set-default MC_YAW_P 5.386490
+
+param set-default MPC_THR_HOVER 0.61
@@ -9,8 +9,6 @@

 param set-default MAV_TYPE 13

-param set-default SYS_CTRL_ALLOC 1
-
 param set-default MC_PITCHRATE_P 0.0800
 param set-default MC_PITCHRATE_I 0.0400
 param set-default MC_PITCHRATE_D 0.0010
@@ -19,16 +17,15 @@ param set-default MC_ROLLRATE_P 0.0800
 param set-default MC_ROLLRATE_I 0.0400
 param set-default MC_ROLLRATE_D 0.0010
 param set-default MC_ROLL_P 9.0
-
 param set-default MPC_XY_VEL_I_ACC 4
 param set-default MPC_XY_VEL_P_ACC 3

 param set-default RTL_DESCEND_ALT 10
-param set-default RTL_LAND_DELAY 0

 param set-default TRIG_INTERFACE 3
 param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 0
+param set-default MNT_MODE_IN 4
+param set-default MNT_MODE_OUT 2
 param set-default MAV_PROTO_VER 2

 param set-default CA_AIRFRAME 0
@@ -59,6 +56,11 @@ param set-default PWM_MAIN_FUNC3 103
 param set-default PWM_MAIN_FUNC4 104
 param set-default PWM_MAIN_FUNC5 105
 param set-default PWM_MAIN_FUNC6 106
+# Gimbal
+param set-default PWM_MAIN_FUNC7 420
+param set-default PWM_MAIN_FUNC8 421
+param set-default PWM_MAIN_FUNC9 422
+# Landing gear
+param set-default PWM_MAIN_FUNC10 400
+param set-default PWM_MAIN_FUNC11 400

-set MIXER skip
-set MIXER_AUX none
@@ -1,31 +0,0 @@
-#!/bin/sh
-#
-# @name Typhoon H480 SITL
-#
-# @type Hexarotor x
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MAV_TYPE 13
-
-param set-default MC_PITCHRATE_P 0.0800
-param set-default MC_PITCHRATE_I 0.0400
-param set-default MC_PITCHRATE_D 0.0010
-param set-default MC_PITCH_P 9.0
-param set-default MC_ROLLRATE_P 0.0800
-param set-default MC_ROLLRATE_I 0.0400
-param set-default MC_ROLLRATE_D 0.0010
-param set-default MC_ROLL_P 9.0
-param set-default MPC_XY_VEL_I_ACC 4
-param set-default MPC_XY_VEL_P_ACC 3
-
-param set-default RTL_DESCEND_ALT 10
-
-param set-default TRIG_INTERFACE 3
-param set-default TRIG_MODE 4
-param set-default MNT_MODE_IN 4
-param set-default MNT_MODE_OUT 2
-param set-default MAV_PROTO_VER 2
-
-set MIXER hexa_x
@@ -1,10 +0,0 @@
-
-mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix
-
-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p
-
-# shellcheck disable=SC2154
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
-# shellcheck disable=SC2154
-mavlink stream -r 50 -s ATTITUDE_QUATERNION -u $udp_offboard_port_local
-mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_offboard_port_local
@@ -32,56 +32,58 @@
 ############################################################################

 px4_add_romfs_files(
-	10016_iris
-	10017_iris_ctrlalloc
-	10018_iris_foggy_lidar
-	10019_omnicopter
-	10020_if750a
-	10030_px4vision
-	10040_quadx
-	10041_airplane
-	10042_xvert
-	1010_iris_opt_flow
-	1010_iris_opt_flow.post
-	1011_iris_irlock
-	1012_iris_rplidar
-	1013_iris_vision
-	1013_iris_vision.post
-	1014_solo
-	1015_iris_obs_avoid
-	1015_iris_obs_avoid.post
-	1017_iris_opt_flow_mockup
-	1018_iris_vision_velocity
-	1019_iris_dual_gps
-	1020_uuv_generic
-	1021_uuv_hippocampus
-	1022_uuv_bluerov2_heavy
-	1030_plane
-	1031_plane_cam
-	1032_plane_catapult
-	1033_plane_lidar
-	1033_rascal
-	1034_rascal-electric
-	1035_techpod
-	1036_malolo
-	1037_believer
-	1038_glider
-	1040_standard_vtol
-	1041_tailsitter
-	1042_tiltrotor
-	1043_standard_vtol_drop
-	1043_standard_vtol_drop.post
-	1060_rover
-	1061_r1_rover
-	1062_tf-r1
-	1070_boat
-	3010_quadrotor_x
-	3011_hexarotor_x
-	17001_tf-g1
-	17002_tf-g2
-	2507_cloudship
-	6011_typhoon_h480
-	6011_typhoon_h480.post
-	6012_typhoon_h480_ctrlalloc
-	6012_typhoon_h480_ctrlalloc.post
+	1010_gazebo_iris_opt_flow
+	1010_gazebo_iris_opt_flow.post
+	1011_gazebo_iris_irlock
+	1012_gazebo_iris_rplidar
+	1013_gazebo_iris_vision
+	1013_gazebo_iris_vision.post
+	1015_gazebo_iris_obs_avoid
+	1015_gazebo_iris_obs_avoid.post
+	1017_gazebo_iris_opt_flow_mockup
+	1019_gazebo_iris_dual_gps
+	1021_gazebo_uuv_hippocampus
+	1022_gazebo_uuv_bluerov2_heavy
+	1030_gazebo_plane
+	1031_gazebo_plane_cam
+	1032_gazebo_plane_catapult
+	1033_jsbsim_rascal
+	1034_flightgear_rascal-electric
+	1035_gazebo_techpod
+	1036_jsbsim_malolo
+	1037_gazebo_believer
+	1038_gazebo_glider
+	1039_flightgear_rascal
+	1040_gazebo_standard_vtol
+	1041_gazebo_tailsitter
+	1042_gazebo_tiltrotor
+	1043_gazebo_standard_vtol_drop
+	1044_gazebo_plane_lidar
+	1060_gazebo_rover
+	1061_gazebo_r1_rover
+	1062_flightgear_tf-r1
+	1070_gazebo_boat
+
+	2507_gazebo_cloudship
+
+	3010_jsbsim_quadrotor_x
+	3011_jsbsim_hexarotor_x
+
+	4001_ign_x500
+
+	6001_ign_x4
+	6011_gazebo_typhoon_h480
+	6011_gazebo_typhoon_h480.post
+
+	10016_gazebo_iris
+	10017_jmavsim_iris
+	10018_gazebo_iris_foggy_lidar
+	10019_gazebo_omnicopter
+	10030_gazebo_px4vision
+	10040_sihsim_quadx
+	10041_sihsim_airplane
+	10042_sihsim_xvert
+
+	17001_flightgear_tf-g1
+	17002_flightgear_tf-g2
 )
@@ -32,7 +32,7 @@ mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $ud
 mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote

 # To display for SIH sitl
-if [ "$SIM_MODE" = "sihsim" ]; then
+if [ "$PX4_SIMULATOR" = "sihsim" ]; then
 	udp_sihsim_port_local=$((19450+px4_instance))
 	udp_sihsim_port_remote=$((19410+px4_instance))
 	mavlink start -x -u $udp_sihsim_port_local -r 400000 -m custom -o $udp_sihsim_port_remote
@@ -1,20 +1,85 @@
 #!/bin/sh
 # shellcheck disable=SC2154

-simulator_tcp_port=$((4560+px4_instance))
+# Simulator IMU data provided at 250 Hz
+param set-default IMU_INTEG_RATE 250
+
+if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0" ]; then
+
+	echo "INFO  [init] SIH simulator"
+
+	if ! simulator_sih start; then
+		echo "ERROR  [init] simulator_sih failed to start"
+		exit 1
+	fi
+
+elif [ "$PX4_SIMULATOR" = "ignition" ]; then
+
+	echo "INFO  [init] Ignition Gazebo simulator"
+
+	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
+	if [ -f gazebo_env.sh ]; then
+		. ./gazebo_env.sh
+	elif [ -f ../gazebo_env.sh ]; then
+		. ../gazebo_env.sh
+	fi
+
+	if ! ign service --info --service /world/${PX4_SIM_WORLD}/create | grep "ignition.msgs.EntityFactory"; then
+		# starting ign gazebo with ${PX4_SIM_WORLD} world
+		echo "INFO  [init] starting ign gazebo"
+
+		if [ -z $HEADLESS ]; then
+			ign gazebo --verbose=1 -r "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
+		else
+			# starting ign gazebo headless
+			ign gazebo --verbose=1 -r -s "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
+		fi
+	else
+		echo "INFO  [init] ign gazebo already running"
+	fi
+
+	if simulator_ignition_bridge start -m "${PX4_SIM_MODEL#*ign_}" -w "${PX4_SIM_WORLD}"; then
+		sensor_baro_sim start
+		sensor_gps_sim start
+		sensor_mag_sim start
+	else
+		echo "ERROR  [init] ign gazebo failed to start"
+		exit 1
+	fi
+
+elif [ "$PX4_SIM_MODEL" = "jmavsim_iris" ] || [ "$PX4_SIMULATOR" = "jmavsim" ]; then
+
+	echo "INFO  [init] jMAVSim simulator"
+
+	if jps | grep -i jmavsim; then
+		kill $(jps | grep -i jmavsim | awk '{print $1}') || true
+		sleep 1
+	fi
+
+	./jmavsim_run.sh -l -r 250 &
+
+	simulator_mavlink start -h localhost $((4560+px4_instance))

-# Check if PX4_SIM_HOSTNAME environment variable is empty
-# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
-# If both are empty use localhost for simulator
-if [ -z "${PX4_SIM_HOSTNAME}" ]; then
-  if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
-    echo "PX4 SIM HOST: localhost"
-    simulator start -c $simulator_tcp_port
-  else
-    echo "PX4 SIM HOST: $PX4_SIM_HOST_ADDR"
-    simulator start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
-  fi
 else
-  echo "PX4 SIM HOST: $PX4_SIM_HOSTNAME"
-  simulator start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
+	# otherwise start simulator (mavlink) module
+	simulator_tcp_port=$((4560+px4_instance))
+
+	# Check if PX4_SIM_HOSTNAME environment variable is empty
+	# If empty check if PX4_SIM_HOST_ADDR environment variable is empty
+	# If both are empty use localhost for simulator
+	if [ -z "${PX4_SIM_HOSTNAME}" ]; then
+
+		if [ -z "${PX4_SIM_HOST_ADDR}" ]; then
+			echo "INFO  [init] PX4_SIM_HOSTNAME: localhost"
+			simulator_mavlink start -c $simulator_tcp_port
+		else
+			echo "INFO  [init] PX4_SIM_HOSTNAME: $PX4_SIM_HOST_ADDR"
+			simulator_mavlink start -t $PX4_SIM_HOST_ADDR $simulator_tcp_port
+		fi
+
+	else
+		echo "INFO  [init] PX4_SIM_HOSTNAME: $PX4_SIM_HOSTNAME"
+		simulator_mavlink start -h $PX4_SIM_HOSTNAME $simulator_tcp_port
+	fi
+
 fi
@@ -1,6 +1,6 @@
 #!/bin/sh

-set -e
+#set -e

 # PX4 commands need the 'px4-' prefix in bash.
 # (px4-alias.sh is expected to be in the PATH)
@@ -24,12 +24,13 @@ fi

 # initialize script variables
 set IO_PRESENT                  no
-set MIXER                       none
+set MIXER                       skip
 set MIXER_AUX                   none
 set MIXER_FILE                  none
 set OUTPUT_MODE                 sim
 set EXTRA_MIXER_MODE            none
 set PWM_OUT                     none
+set PWM_AUX_OUT                 none
 set SDCARD_MIXERS_PATH          etc/mixers
 set USE_IO                      no
 set VEHICLE_TYPE                none
@@ -38,10 +39,24 @@ set LOGGER_BUF                  1000

 set RUN_MINIMAL_SHELL           no

-# Use the variable set by sitl_run.sh to choose the model settings.
-if [ "$PX4_SIM_MODEL" = "shell" ]; then
+set SYS_AUTOSTART=0
+
+if [ "$PX4_SIM_MODEL" = "shell" ]
+then
 	set RUN_MINIMAL_SHELL yes
-else
+
+elif [ -n "$PX4_SYS_AUTOSTART" ]
+then
+	echo "env SYS_AUTOSTART: ${PX4_SYS_AUTOSTART}"
+	SYS_AUTOSTART=${PX4_SYS_AUTOSTART}
+
+elif [ "$PX4_SIM_MODEL" = "none" ] || [ -z $PX4_SIM_MODEL ]
+then
+	# no airframe selected
+	SYS_AUTOSTART=0
+
+elif [ -n "$PX4_SIM_MODEL" ]
+then
 	# Find the matching Autostart ID (file name has the form: [0-9]+_${PX4_SIM_MODEL})
 	# TODO: unify with rc.autostart generation
 	# shellcheck disable=SC2012
@@ -50,12 +65,13 @@ else
 		echo "ERROR  [init] Unknown model $PX4_SIM_MODEL (not found by name on ${R}etc/init.d-posix/airframes)"
 		exit 1
 	else
+		SYS_AUTOSTART=$REQUESTED_AUTOSTART
 		echo "INFO  [init] found model autostart file as SYS_AUTOSTART=$REQUESTED_AUTOSTART"
 	fi
 fi

 # Load parameters
-set PARAM_FILE eeprom/parameters_"$REQUESTED_AUTOSTART"
+set PARAM_FILE parameters.bson
 param select $PARAM_FILE

 if [ -f $PARAM_FILE ]
@@ -66,26 +82,16 @@ then
 	else
 		echo "[param] FAILED loading $PARAM_FILE"
 	fi
-else
-	echo "[param] parameter file not found, creating $PARAM_FILE"
 fi

 # exit early when the minimal shell is requested
 [ $RUN_MINIMAL_SHELL = yes ] && exit 0

+if param compare SYS_AUTOSTART $SYS_AUTOSTART
+then
+	set AUTOCNF no

-# Use environment variable PX4_ESTIMATOR to choose estimator.
-if [ "$PX4_ESTIMATOR" = "q" ]; then
-	param set SYS_MC_EST_GROUP 3
-elif [ "$PX4_ESTIMATOR" = "ekf2" ]; then
-	param set SYS_MC_EST_GROUP 2
-elif [ "$PX4_ESTIMATOR" = "lpe" ]; then
-	param set SYS_MC_EST_GROUP 1
-elif [ "$PX4_ESTIMATOR" = "inav" ]; then
-	param set SYS_MC_EST_GROUP 0
-fi
-
-if param compare SYS_AUTOSTART $REQUESTED_AUTOSTART
+elif [ "$SYS_AUTOSTART" -eq 0 ]
 then
 	set AUTOCNF no
 else
@@ -106,7 +112,7 @@ param set MAV_SYS_ID $((px4_instance+1))

 if [ $AUTOCNF = yes ]
 then
-	param set SYS_AUTOSTART $REQUESTED_AUTOSTART
+	param set SYS_AUTOSTART $SYS_AUTOSTART

 	param set CAL_ACC0_ID  1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
 	param set CAL_GYRO0_ID 1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
@@ -143,6 +149,7 @@ param set-default EKF2_MULTI_MAG 2
 param set-default SENS_MAG_MODE 0

 param set-default IMU_GYRO_FFT_EN 1
+param set-default MAV_PROTO_VER 2 # Ensures QGC does not drop the first few packets after a SITL restart due to MAVLINK 1 packets

 param set-default -s MC_AT_EN 1

@@ -190,28 +197,28 @@ do
 			;;
 	esac
 done
-if [ ! -e "$autostart_file" ]; then
+
+if [ -e "$autostart_file" ]
+then
+	. "$autostart_file"
+
+elif [ ! -e "$autostart_file" ] && [ "$SYS_AUTOSTART" -ne "0" ]
+then
 	echo "Error: no autostart file found ($autostart_file)"
 	exit 1
 fi

-. "$autostart_file"
-
-# Simulator IMU data provided at 250 Hz
-param set IMU_INTEG_RATE 250
-
 #user defined params for instances can be in PATH
 . px4-rc.params

 dataman start
-# start sih in sih_sim mode, otherwise simulator module
-if [ "$SIM_MODE" = "sihsim" ]; then
-	sih start
+
 # only start the simulator if not in replay mode, as both control the lockstep time
-elif ! replay tryapplyparams
+if ! replay tryapplyparams
 then
-  . px4-rc.simulator
+	. px4-rc.simulator
 fi
+
 load_mon start
 battery_simulator start
 tone_alarm start
@@ -1,72 +0,0 @@
-#!/bin/sh
-#
-# @name HILStar (XPlane)
-#
-# @type Simulation
-# @class Plane
-#
-# @output MAIN1 aileron
-# @output MAIN2 elevator
-# @output MAIN3 rudder
-# @output MAIN4 throttle
-# @output MAIN5 flaps
-# @output MAIN6 gear
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-# @board px4_fmu-v2 exclude
-#
-
-. ${R}etc/init.d/rc.fw_defaults
-
-param set-default BAT1_N_CELLS 3
-
-param set-default FW_AIRSPD_MAX 20
-param set-default FW_AIRSPD_MIN 12
-param set-default FW_AIRSPD_TRIM 14
-param set-default FW_R_TC 0.3
-param set-default FW_P_TC 0.3
-param set-default FW_L1_DAMPING 0.74
-param set-default FW_L1_PERIOD 16
-param set-default FW_LND_ANG 15
-param set-default FW_LND_FLALT 5
-param set-default FW_PR_FF 0.35
-param set-default FW_PR_P 0.2
-param set-default FW_RR_FF 0.6
-param set-default FW_RR_P 0.3
-
-param set-default RWTO_TKOFF 1
-
-param set-default CA_AIRFRAME 1
-param set-default CA_ROTOR_COUNT 1
-param set-default CA_ROTOR0_PX 0.3
-param set-default CA_SV_CS_COUNT 4
-param set-default CA_SV_CS0_TRQ_R 0.5
-param set-default CA_SV_CS0_TYPE 2
-param set-default CA_SV_CS1_TRQ_P 1.0
-param set-default CA_SV_CS1_TYPE 3
-param set-default CA_SV_CS2_TRQ_Y 1.0
-param set-default CA_SV_CS2_TYPE 4
-param set-default CA_SV_CS3_TYPE 10
-
-param set-default HIL_ACT_REV 2
-param set-default HIL_ACT_FUNC1 201
-param set-default HIL_ACT_FUNC2 202
-param set-default HIL_ACT_FUNC3 203
-param set-default HIL_ACT_FUNC4 101
-param set-default HIL_ACT_FUNC5 204
-param set-default HIL_ACT_FUNC6 400
-
-param set SYS_HITL 1
-
-param set UAVCAN_ENABLE 0
-
-# disable some checks to allow to fly
-# - with usb
-param set-default CBRK_USB_CHK 197848
-# - without real battery
-param set-default CBRK_SUPPLY_CHK 894281
-# - without safety switch
-param set-default COM_PREARM_MODE 0
-param set-default CBRK_IO_SAFETY 22027
-
-set MIXER AERT
@@ -1,36 +0,0 @@
-#!/bin/sh
-#
-# @name Team Blacksheep Discovery
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 feed-through of RC AUX1 channel
-# @output MAIN6 feed-through of RC AUX2 channel
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default MC_ROLLRATE_P 0.1
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.0017
-param set-default MC_PITCHRATE_P 0.14
-param set-default MC_PITCHRATE_I 0.1
-param set-default MC_PITCHRATE_D 0.0025
-param set-default MC_YAWRATE_P 0.28
-
-set MIXER quad_w
@@ -1,40 +0,0 @@
-#!/bin/sh
-#
-# @name 3DR Iris Quadrotor
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Lorenz Meier <lorenz@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-# TODO tune roll/pitch separately
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_I 0.05
-param set-default MC_ROLLRATE_D 0.004
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_I 0.05
-param set-default MC_PITCHRATE_D 0.004
-param set-default MC_YAW_P 2.5
-param set-default MC_YAWRATE_P 0.25
-param set-default MC_YAWRATE_I 0.25
-
-param set-default BAT1_V_DIV 12.27559
-param set-default BAT1_A_PER_V 15.391030303103
-
-set MIXER quad_w
@@ -1,43 +0,0 @@
-#!/bin/sh
-#
-# @name Team Blacksheep Discovery Endurance
-#
-# @type Quadrotor Wide
-# @class Copter
-#
-# @output MAIN1 motor 1
-# @output MAIN2 motor 2
-# @output MAIN3 motor 3
-# @output MAIN4 motor 4
-# @output MAIN5 feed-through of RC AUX1 channel
-# @output MAIN6 feed-through of RC AUX2 channel
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
-# @output AUX4 feed-through of RC FLAPS channel
-#
-# @maintainer Simon Wilks <simon@uaventure.com>
-#
-# @board px4_fmu-v2 exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-param set-default BAT1_N_CELLS 6
-param set-default BAT1_V_EMPTY 3.5
-
-param set-default MC_ROLL_P 7
-param set-default MC_ROLLRATE_P 0.08
-param set-default MC_ROLLRATE_I 0.02
-param set-default MC_PITCH_P 7
-param set-default MC_PITCHRATE_P 0.13
-param set-default MC_PITCHRATE_I 0.02
-param set-default MC_PITCHRATE_D 0.005
-
-param set-default MPC_XY_VEL_MAX 2
-
-param set-default PWM_MAIN_MIN 1080
-
-set MIXER quad_w
@@ -11,7 +11,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x

 param set SYS_HITL 1

@@ -76,6 +76,8 @@ param set-default CA_ROTOR4_AZ 0.0
 param set-default CA_ROTOR4_PX 0.2

 param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
 param set-default CA_SV_CS1_TRQ_R 0.5
 param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS2_TRQ_P 1.0
@@ -106,6 +108,4 @@ param set-default CBRK_IO_SAFETY 22027

 param set-default MAV_TYPE 22

-set MIXER standard_vtol_hitl

-set PWM_OUT 1234
@@ -5,16 +5,12 @@
 # @type Hexarotor Coaxial
 # @class Copter
 #
-# @output MAIN1 front right top, CW; angle:60; direction:CW
-# @output MAIN2 front right bottom, CCW; angle:60; direction:CCW
-# @output MAIN3 back top, CW; angle:180; direction:CW
-# @output MAIN4 back bottom, CCW; angle:180; direction:CCW
-# @output MAIN5 front left top, CW; angle:-60; direction:CW
-# @output MAIN6 front left bottom, CCW;angle:-60; direction:CCW
-#
-# @output AUX1 feed-through of RC AUX1 channel
-# @output AUX2 feed-through of RC AUX2 channel
-# @output AUX3 feed-through of RC AUX3 channel
+# @output Motor1 front right top, CW; angle:60; direction:CW
+# @output Motor2 front right bottom, CCW; angle:60; direction:CCW
+# @output Motor3 back top, CW; angle:180; direction:CW
+# @output Motor4 back bottom, CCW; angle:180; direction:CCW
+# @output Motor5 front left top, CW; angle:-60; direction:CW
+# @output Motor6 front left bottom, CCW;angle:-60; direction:CCW
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
@@ -24,7 +20,28 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER hexa_cox
+param set-default MAV_TYPE 13
+
+param set-default CA_ROTOR_COUNT 6
+param set-default CA_ROTOR0_PX 0.25
+param set-default CA_ROTOR0_PY 0.433
+param set-default CA_ROTOR0_PZ -0.05
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX 0.25
+param set-default CA_ROTOR1_PY 0.433
+param set-default CA_ROTOR1_PZ 0.05
+param set-default CA_ROTOR2_PX -0.5
+param set-default CA_ROTOR2_PY 0
+param set-default CA_ROTOR2_PZ -0.05
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.5
+param set-default CA_ROTOR3_PY 0
+param set-default CA_ROTOR3_PZ 0.05
+param set-default CA_ROTOR4_PX 0.25
+param set-default CA_ROTOR4_PY -0.433
+param set-default CA_ROTOR4_PZ -0.05
+param set-default CA_ROTOR4_KM -0.05
+param set-default CA_ROTOR5_PX 0.25
+param set-default CA_ROTOR5_PY -0.433
+param set-default CA_ROTOR5_PZ 0.05

-# Need to set all 8 channels
-set PWM_OUT 12345678
@@ -12,8 +12,6 @@

 . ${R}etc/init.d/rc.mc_defaults

-set MIXER quad_x
-set PWM_OUT 1234

 param set UAVCAN_ENABLE 0

@@ -12,8 +12,6 @@

 . ${R}etc/init.d/rc.fw_defaults

-set MIXER AERT
-set PWM_OUT 1234

 param set UAVCAN_ENABLE 0

--- a/Show More
+++ b/Show More
				`@@ -1 +0,0 @@`
				`mixer append /dev/pwm_output0 etc/mixers-sitl/package_drop.aux.mix`