* Add vitepress tree
* Update existing workflows so they dont trigger on changes in the docs path
* Add nojekyll, package.json, LICENCE etc
* Add crowdin docs upload/download scripts
* Add docs flaw checker workflows
* Used docs prefix for docs workflows
* Crowdin obvious fixes
* ci: docs move to self hosted runner
runs on a beefy server for faster builds
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: don't run build action for docs or ci changes
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* ci: update runners
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
* Add docs/en
* Add docs assets and scripts
* Fix up editlinks to point to PX4 sources
* Download just the translations that are supported
* Add translation sources for zh, uk, ko
* Update latest tranlsation and uorb graphs
* update vitepress to latest
---------
Signed-off-by: Ramon Roche <mrpollo@gmail.com>
Co-authored-by: Ramon Roche <mrpollo@gmail.com>
* Bidirectional DShot
Co-authored-by: Julian Oes <julian@oes.ch>
* f4/f1 support, not supported
* fix f1 build target
* sanity check timer_channel value, fix CCxNP ifdef, debug stuff
* removed debug code, added define for H7 HAVE_GTIM_CCXNP
* round robin sampling for less than 4 DMA
* unlimited esc_status logging
* dshot: fix formatting
* dshot: add define for number of DMA channels to use
This allows individual boards to override the number of DShot channels
and hence avoid round robin capture of the RPM feedback.
* ARK: enable 4 DMA channels for DShot on 6X
* dshot: publish when all channels are updated
This slows down the ESC_STATUS publication in the case of round robin
capture. E.g. for 800 Hz output with one DMA channel, the ESC_STATUS is
now published at 200 Hz.
* dshot: avoid duplicate publications for bidir and telem
Instead of publishing both bidirectional dshot updates as well as
telemetry updates, we now combine the data from both streams, and
publish whenever we get RPM updates, as the latter arrives with higher
rate, e.g. 200 Hz with round robin, or faster otherwise.
When combining the data, we take RPM from bidirectional dshot, and the
rest from telemetry.
When we have only one of the two, either telemetry or bidirectional
dshot, we just publish that one.
* boards: add ark fpv and pi6x BOARD_DMA_NUM_DSHOT_CHANNELS
* dshot: turn off debug build
---------
Co-authored-by: Julian Oes <julian@oes.ch>
Co-authored-by: alexklimaj <alex@arkelectron.com>
There is already another check for battery_unhealthy, so a separate state
and ID are required.
Fixes the error:
ERROR [failsafe] BUG: duplicate check for caller_id 74
Reading the WAI register is unreliable as the chip sometimes returns
wrong values or boots with the wrong I2C address. This can be fixed by
sending the software reset command to all four possible I2C addresses.
* MissionBase: replay change speed on resume immediately if not going to previous
This fixes an issue where the speed was not correctly set at the beginning of a
survey (with first wp having a DO_CHANGE_SPEED attached) when the user paused
and resumed the mission prior to reaching the first waypoint.
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
* Update src/modules/navigator/mission_base.cpp
Co-authored-by: Stefano Colli <45536733+StefanoColli@users.noreply.github.com>
---------
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
Co-authored-by: Stefano Colli <45536733+StefanoColli@users.noreply.github.com>
* add sf45 driver to 6xrt
* disable the sf45 driver on rover, since collision prevention is tied with MPC params
---------
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Run at sensor_combined speed and publish all other sensors occuring
between 2 sonsor_combined samples.
This allows a crude replay in case ekf2 replay was not enabled during
the flight.
Parameter "void *val" passed to the functions in parameters.cpp are not always
4-byte aligned, so on some platforms direct casting to "int32_t *" or "float *"
leads to an unaligned exception. An example of such user is Logger, which directly packs
parameter values to character buffer.
Signed-off-by: Jukka Laitinen <jukka.laitinen@tii.ae>
The partial derivative of the flow observation with respect
to the terrain and height states involve calculating the derivative
of 1/x, which is -1/x^2. This function is even, making the estimate
diverge in case x (the height above ground) is negative.
The solution is to take the derivative of 1/|x|,
which is -x/|x|^3 and is an odd function; preserving the sign of x.
Note that for positive values of x, the expression reduces to -1/x^2
* gz: use server config file for loading world plugins
* submodule
* use server.config in tree
* newlines
* format
* gzbridge: rename function
* format
* gzbridge: add magnetometer callback
* change gz_find_package to find_package
* fix up directory structure and cmake to allow multiple plugins
* newlines
* add comment block explaining gz_env.sh
* remove dupe readme
* remove SENS_EN_MAGSIM from all gz airframe files except spacecraft
* update gz submodule
Letting the autopilot set the heading during landing while the pilot is
nudging the vehile leads to a weird UX as the vehicle would make a turn
instead of translating.
With this modification, the initial land heading is immediately overridden when the pilot
begins to adjust the drone's position, providing the sensation of full control.
readAndAddSubscription uses nextDataMessage to find the first
corresponding data and nextDataMessage calls readAndAddSubscription
when it finds a new message definition.
* added optical flow to gz bridge
* log high rate sensor data
* it builds
* it builds and publishes, need to figure out build system now
* single library
* rename files
* add gz_msg for proto, fix build, test basic flow impl
* update rate, no blur
* PX4-OpticalFlow impl
* rename OpticalFlowSensor
* rename plugins
* disable gps, add plugin path
* cleanup
* fix plugin path export
* properly add OpticalFlowSystem dependency to gz
* move everything under gz_bridge
* cleanup
* add GZ_VEBOSE
* cleanup model/world build target cmake
* added GZ_DISTRO env, harmonic or ionic
* fix gz transport, unstage ark fpv bootloader
* unstage logged_topics.cpp
* cleanup
* make format
* ci fixes
* fix cmake
* remove required for gz-transport
* use model/world namespace for multi vehicle sim. Make format
* make format
* license
* remove needless member var
* made separate Kconfig for gz_msgs, gz_plugins, and gz_bridge
* move OpticalFlow build to it's own cmake
* fix clang
* cleanup comments
* fix rebase
* disable SENS_EN_GPSSIM for all gz airframes
* add GPS + noise to GZBridge
* remove mutex from gz callbacks. Callbacks run synchronously after sim update step and run() loop does not share resources.
* remove hrt check in callbacks
* format
* remove param set-default for already default params
* update submodule
* remove unnecessary comments
* overhaul of the GZBridge and px4-rc.simulator script
* remove arg
* shellcheck disable
* add bus/address
* start gz_bridge before adjusting sim speed or camera follow
Setting "lockdown" disables the actuators. In this mode,
"force_failsafe" has no effect as the actuators are disabled, so the
parachute is not getting released as it requires the output to change to
its failsafe value.
* [ulanding_radar] Fix comms error perf counter usage
* [ulanding_radar] Workaround for lost messages by lowering sampling rate
The current implementation of the Aerotenna uLanding radar driver assumes that
the UART frames are received in full. If the driver polls with 10ms this is not
always the case and the driver will fail to parse the frame leading to
significant packet loss. This workaround polls at 12ms which ensures that at
least one entire frame is received.
