- ecl in PX4/Firmware (dc358857c877ae01b922d84a6c6fffe6d8c46810): https://github/commit/1541e4b414fe63ec9d6c3077375db7e20c20ef4a
- ecl current upstream: https://github/commit/a8e0e82858318042500f96f5ee882c638f201426
- Changes: https://github/compare/1541e4b414fe63ec9d6c3077375db7e20c20ef4a...a8e0e82858318042500f96f5ee882c638f201426a8e0e82 2020-12-08 Daniel Agar - EKF: update mag LPF immediately
398fe15 2020-11-02 Daniel Agar - EKF: allow initialising without mag depending on configuration
1237087 2020-12-16 Daniel Agar - AlphaFilter add constructor that takes alpha and use in EKF
37e84b7 2020-12-16 Daniel Agar - README: fix zenodo badge (rename ecl -> PX4-ECL)
5ccb8b4 2020-12-15 Mathieu Bresciani - fakePosFusion: reset _last_known_posNE to current state when starting (#943)
9d22f14 2020-12-10 bresch - gps_alt: constrain var using 1.5 as a typical ratio of vacc/hacc
b0cf45e 2020-12-10 bresch - gps_alt: rename getGpsAltVar -> getGpsHeightVariance
62f2e26 2020-12-10 bresch - gps_alt: reset GPS alt variance usign helper function
f7bddda 2020-12-10 bresch - gps_alt: do not scale up reported gps vertical accuracy
02369cd 2020-12-10 bresch - gps_alt: extract measurement variance computation and saturation
- split out switches from manual_control_setpoint into new message manual_control_switches
- manual_control_switches published at minimal rate (~ 1 Hz) or immediately on change
- simple switch debounce in rc_update (2 consecutive identical decodes required)
- manual_control_switches logged at full rate rather than sampled at (5-10% of messages logged)
- manual_control_setpoint publish at minimal rate unless changing
- commander handle landing gear switch for manual modes
- processing of mode_slot and mode_switch is now split so we only do one or the other (not both)
- a future step will be to finally drop mode_switch and accompanying switches entirely
Co-authored-by: Matthias Grob <maetugr@gmail.com>
- the states can be initialised more accurately using an airspeed measurement
and the wind estimator uses the first measurement to initialise
Signed-off-by: RomanBapst <bapstroman@gmail.com>
- reset IMU bias on calibration change (only works with multi-ekf)
- standardize PX4_INFO/PX4_WARN/PX4_ERR output for multi-ekf with instance number
- https://github.com/PX4/PX4-ECL/pull/924
src/lib/tunes already knows which tunes are interruptable, so add
return values to expose than and use than in tone_alarm.
This fixes the issue that repeating tunes cannot be interrupted without
tune_override set to true.
Signed-off-by: Alex Mikhalev <alex@corvus-robotics.com>
- fmu-v5 debug and stackcheck builds now need to be CONSTRAINED_FLASH to fit
- delete unused holybro_durandal-v1_stackcheck build (also CONSTRAINED_FLASH)
- ekf2 can now run in multi-instance mode (currently up to 9 instances)
- in multi mode all estimates are published to alternate topics (eg estimator_attitude instead of vehicle_attitude)
- new ekf2 selector runs in multi-instance mode to monitor and compare all instances, selecting a primary (eg N x estimator_attitude => vehicle_attitude)
- sensors module accel & gyro inconsistency checks are now relative to the mean of all instances, rather than the current primary (when active ekf2 selector is responsible for choosing primary accel & gyro)
- existing consumers of estimator_status must check estimator_selector_status to select current primary instance status
- ekf2 single instance mode is still fully supported and the default
Co-authored-by: Paul Riseborough <gncsolns@gmail.com>
This is done to prevent yawing 180 degrees when switching
to hold mode with high velocity and the overshoot causing a 180°
yaw turn.
The yaw is unlocked on waypoint updates and the yaw
setpoint generation had to be put at the end because otherwise the
first yaw calculation is with the old waypoint and immediately
locks again.
px4_add_library adds uorb dependencies, which since cf26f24387 added libm.
This in turn led to build failures for px4_io-v2 in the form of:
__aeabi_f2d' wf_sqrt.c:(.text.sqrtf+0x54): undefined reference to
__aeabi_ddiv'
PX4 BuildBot