* tla2528 basic implementation (restarting driver still fails)
* fixed probe function, restarting driver now works
* -added reset call to init
-added return value checks on all important transfers and retry if failed when possible
-removed comments
-removed unnecessary parameters of module
* Introduced initialization-states that can be executed multiple times on failure
* Added one more state s.t. init() only does probing
* added communication error count _comms_errors
* use get() instead of param_find
* changed scheduling interval
* start in reset state. check second byte in probe. add 2 retries to probe function
* add space in front of comments
* jump to reset state when another state fails
* changed SAMPLE_INTERVAL to 10_ms
* added static assert on number of channels in adc_report
Barometeric pressure was changed to the SI unit Pascal instead of the non-SI unit Hectopascal/Millibar in
0c31f6389666d942d59b74cd2e107a5d3b263ea6
This script stayed unchanged and suffers from assuming `sensor_baro.pressure` is still in the old unit which would be a 100 times smaller number.
MCP9808: Replaced PX4_INFO with PX4_DEBUG
MCP9808: Update date in headers
MCP9808: Define functions before variables
MCP9808: Increase logging interval for sensor_temp
MCP9808: Removed extra space
MCP9808: Remove this->
- Remove enum class Register : uint8_t
- Explicitly initialize buffer
- Explicitly initialize temp_raw
- Rename uorb publisher
- Remove overide from print_status()
- Take timestamp after read, correct measurement_time to uint64 and use hrt_elapsed_time()
- Remove exit_and_cleanup
- Move functions out of main + cleanup whitespace
MCP9808: remove exit_and_cleanup
MCP9808: Take timestamp after read, correct measurement_time to uint64 and use hrt_elapsed_time()
MCP9808: remove overide from print_status()
MCP9808: rename uorb publisher
MCP9808: explicitly initialize temp_raw
MCP9808: explicitly initialize buffer
MCP9808: Remove enum class Register : uint8_t
MCP9808: move functions out of main + cleanup whitespace
During backtransition in gusty conditions the current "pitch-up to decelerate" strategy had deficiencies as the motion is not always purely in body-x direction. Thus we replace it here with a "tilt-up to decelerate" strategy.
Secondly, in GNSS-denied environments where the position error increases, tracking a precise landing point through position feedback is not reasonable, and we now instead discard the position feedback in cases where the position error exceeds 10m.
* add eph limit check for dist-to-target VT BT deceleration
* add alphafilter for acceleration estimate in VT BT, rename constants
* explicitly set yawspeed_setpoint to 0
* replace backtransition pitch-setpoint with tilt-setpoint
* blend vtol-backtransition roll vehicle_attitude_sp based on mc_weight
* remove memcpy for v_att_sp
* rt106x: Use platform SPI hal layer
* rt106x: Add romapi support and reboot to isp/bootloader
* bootloader: imxrt_common: Add rt106x support
* NXP MR-Tropic initial commit
* Add missing file for mr-tropic bootloader
* nxp-mr-tropic:Bootloader Alow Assertion debugging & Keep Ram Vectors
* nxp-mr-tropic: Firmware Boot from bootloader
* nxp-mr-tropic:Add Bootloader bin file
* mr-tropic: Update config and linker
Fixes enet issues with write-back and some code cleanup.
Furthermore increase NOR LittleFS to 256kB to reflect on linker
* Update NuttX
* mr-tropic: fix itcm apping and add mr-tropic to itcm check
---------
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
