TSC21
a324e5465a
timesync: extend timesync_status message with protocol source field and enum
2021-08-12 08:44:53 +02:00
Claudio Micheli
a6d88cad18
mavlink_main: add ESC_INFO & ESC_STATUS to onboard_lowbandwith configuration
...
Signed-off-by: Claudio Micheli <claudio@auterion.com >
2021-08-11 17:20:08 +02:00
Oleg Evseev
a93f8dade4
mavlink: receiver fix geo include
2021-08-10 08:18:28 -04:00
bresch
741f9c6d1a
Commander: change attitude quaternion check to avoid numerical issues
2021-08-08 11:41:23 -04:00
Daniel Agar
fb4ac0f08c
ekf2: remove redundant IMU vibration metrics
...
- consume IMU vibration metrics from vehicle_imu_status
2021-08-08 06:26:03 -07:00
Julian Oes
0033c0fc51
navigator: fix param description
2021-08-05 15:18:55 +02:00
bresch
01d0b8800e
commander: report GNSS yaw fault to user
2021-08-05 11:10:02 +02:00
bresch
44219e9f45
EKF: add GNSS yaw to emergency yaw fallback test
2021-08-05 11:10:02 +02:00
bresch
11cd51c132
EKF: allow emergency reset in GNSS yaw and EV yaw aiding modes
2021-08-05 11:10:02 +02:00
bresch
4ebfbc6eab
GNSS yaw: use NIS sequence to detect bias in state
...
A constant large value in the (signed) normalized innovation test ratio is a sign
of bias in the state estimate. This metric can be used to trigger a
covariance boost or reset
2021-08-05 11:10:02 +02:00
bresch
3fe04a91f6
GNSS yaw: add observation jump on ground
...
Some receivers are initializing to some heading and then resetting to
the correct one after a couple of seconds. EKF2 should detect that and
reset to the new value
2021-08-05 11:10:02 +02:00
bresch
30c7a596af
GNSS yaw: allow unlimited resets on ground
2021-08-05 11:10:02 +02:00
bresch
e90e1c7e2a
GNSS yaw: use dedicated observation noise
2021-08-05 11:10:02 +02:00
romain-chiap
718e5b5b5d
sih: add fixed-wing support
2021-08-05 09:16:14 +02:00
Daniel Agar
2e02ad7c4e
atl_mantis-edu front and rear status LEDS
2021-08-04 17:15:24 -04:00
Daniel Agar
fb3b7a4649
mavlink: receiver handle RC_CHANNELS if from MAV_COMP_ID_SYSTEM_CONTROL
2021-08-04 17:15:24 -04:00
Daniel Agar and Julian Oes
e900f2ea54
boards: Advanced Technology Labs (ATL) Mantis EDU support and airfarme (SYS_AUTOSTART 4061)
...
Co-authored-by: Julian Oes <julian@oes.ch >
Co-authored-by: Daniel Agar <daniel@agar.ca >
2021-08-04 17:15:24 -04:00
Hamish Willee
6aa4e12b5f
Typo in LTEST_MEAS_UNC docs
2021-08-04 08:01:39 +02:00
Hamish Willee
f5dd0edc9f
LTEST_VEL_UNC_IN typo in docs
2021-08-04 08:01:39 +02:00
Hamish Willee
b157bc407e
Typo in docs for LPE_VIS_DELAY
2021-08-04 08:01:39 +02:00
Hamish Willee
b82464f0ef
Parameter typo PLD_MAX_SRCH
2021-08-04 08:01:39 +02:00
Daniel Agar
93aa6e3f78
ekf2: baro bias publish minor cleanup
...
- naming consistency (estimator prefix as "namespace")
- only publish if baro is available and bias is changing as a small logging optimization
- avoid unnecessary copying (get const reference to status directly)
- trivial code style fixes
2021-08-02 13:59:38 -04:00
Daniel Agar
d997a8d308
mavlink: receiver fix HIL_STATE_QUATERNION map projection init
...
- fixes https://github.com/PX4/PX4-Autopilot/issues/17977
2021-08-02 09:59:09 -04:00
David Jablonski
9c36236565
ekf2: increase stack size to 3600
2021-08-02 09:47:38 -04:00
Daniel Agar
54918f650b
Update world_magnetic_model to latest Sun Aug 1 16:57:37 UTC 2021
2021-08-01 13:53:53 -04:00
Igor Mišić
af2247bd94
mavlink: use dynamic camera comp id instead of hardcoded value
2021-07-31 12:41:49 -04:00
Dima Ponomarev
d08d0443bc
Add internal combustion engine status uavcan bridge and mavlink EFI_STATUS stream
2021-07-30 22:31:43 -04:00
bresch
1016600ded
Revert "mc_pos_control: omit initial warning"
...
This reverts commit 446598d003 .
The first warning was due to a race condition that is fixed by the previous commit;
don't omit the first warning anymore
2021-07-30 21:39:18 -04:00
bresch
e7a2c1d88e
MCPosControl: fix invalid setpoint race condition
...
Only modify the _setpoint for takeoff when there is a new uORB message
to avoid a race condition where both vel_sp(2) and accel_sp(2) can be
NAN at the same time.
2021-07-30 21:39:18 -04:00
Daniel Agar
713a1d08a3
sensors: add accel/gyro current priority to sensors_status_imu
...
- later the sensor priorities (user configurable) can be factored into the estimator selection criteria
2021-07-30 21:20:01 -04:00
leonardosimovic
e6166dfc76
AirspeedSelector: Improve wording of sensor failure message
2021-07-28 07:37:38 +02:00
bresch
521b9f5dcc
control: do not constantly ask for mag reset if yaw not aligned
...
This also prevents triggering the `_mag_yaw_reset_req` flag in magless
mode; preventing the GNSS fustion from starting.
2021-07-27 13:34:53 +02:00
bresch
639e0a39cf
EKF2: add yaw estimator alignment test
2021-07-27 13:34:53 +02:00
Mathieu Bresciani and Daniel Agar
17ebcd2456
mag_control: fuse fake heading during leveling fine alignment ( #17964 )
...
Co-authored-by: Daniel Agar <daniel@agar.ca >
2021-07-27 11:50:50 +02:00
Daniel Agar
f2ae8ae814
sensors/vehicle_imu: vibration metrics use acceleration and angular velocity
...
- this avoids any jitter in the integration timespan from impacting the vibration metrics
- vehicle_imu_status vibration metrics are not consumed by anything
(yet), so changing the scaling of the metric shouldn't matter
2021-07-26 13:55:47 -04:00
Daniel Agar
e01b631465
ekf2: change indication test limit float precision to minimize false positives
2021-07-26 13:54:36 -04:00
Daniel Agar
e9f84ba708
keep minimal legacy battery parameters for older QGC usability
...
- BAT_V_EMPTY, BAT_V_CHARGED, BAT_V_LOAD_DROP, BAT_N_CELLS
2021-07-23 15:07:53 -04:00
Daniel Agar
7846771c68
sensors: populate sensors_status_imu healthy flags even in multi-EKF mode
2021-07-23 11:17:08 -04:00
Julian Oes
11480cdbc7
mavlink: fix offboard velocity input
...
This reverts the behavior for offboard velocity setpoint.
Back in v1.11, the velocity input in NED_BODY was assumed to be in the
world frame but rotated by yaw to the vehicle frame. With the current
state the frame is completely fixed to the body. While this might be
technically correct, it doesn't seem much intuitive for multicopters
and breaks the MAVSDK offboard velocity API.
So as an example, with a velocity setpoint of 5 m/s forward, the drone
would in
- v1.11: fly forward with 5 m/s
- v1.12: start to fly forward by pitching down but then descend rapidly
as the forward velocity would translate to a setpoint in Z into the
ground as it is pitched down.
This commit restores the behavior to what we had previously.
2021-07-22 09:40:29 +02:00
Oleg Evseev
440449b85f
mavlink: use explicit routing for message forwarding
...
Forward message to other mavlink channels only if it is broadcast or the target component was seen on this link before (at least one message was received)
2021-07-21 10:39:14 +02:00
dagar
a8e3c46cdb
[AUTO COMMIT] update change indication
2021-07-19 16:53:45 -04:00
bresch
54c7e74de3
EKF: add baro bias estimator using GNSS altitude
2021-07-19 16:53:45 -04:00
Daniel Agar
10f4fc7783
ekf2: don't print distance_sensor selection unless there are multiple options
2021-07-19 12:17:12 -04:00
Daniel Agar
87610957a4
flight_mode_manager: pass deltas on estimator reset
2021-07-19 09:34:07 -04:00
Daniel Agar
774ad80ba0
systemcmds/tests: split out microbenchmarks and remove obsolete tests
...
- reorganize Jenkins HIL tests
2021-07-18 18:02:33 -04:00
Daniel Agar
0101934f47
ekf2: multi-EKF instance message INFO -> DEBUG
2021-07-18 18:02:33 -04:00
Daniel Agar
0ad65738db
gyro_calibration: reset on any parameter change
...
- perform fresh calibration once system has settled
2021-07-18 18:02:33 -04:00
Daniel Agar
9ac860ac33
ekf2: test fix double promotion warnings
2021-07-18 15:49:53 -04:00
Daniel Agar
9087ba2259
world_magnietc_model: update to latest and fix code style
...
- minimize test_geo_lookup.cpp optimization to improve compile times
2021-07-18 15:49:53 -04:00
mcsauder
f34862f143
Delete redundant Ekf class member variable constructor initilizations and add missing C++ style initializers to the header file.
2021-07-17 12:24:56 -04:00