mRo boards: Fix for USART clock selection (#23524 )

Add airspeed message to uxrce dds topics (#23847 )
Co-authored-by: Weng <q350w358@ENGR-GQT56X3-X.home.ku.edu>
2026-06-09 07:40:06 +08:00 · 2024-11-06 12:20:00 -08:00 · 2024-11-04 19:18:29 -09:00 · 2024-10-31 13:34:45 +01:00 · 2024-10-29 19:58:01 +13:00 · 2024-10-29 19:58:01 +13:00
318 changed files with 7175 additions and 3364 deletions
@@ -47,7 +47,7 @@ pipeline {
                     "ark_fmu-v6x_bootloader",
                     "ark_fmu-v6x_default",
                     "ark_pi6x_bootloader",
-                     "ark_pi6x_default"
+                     "ark_pi6x_default",
                     "atl_mantis-edu_default",
                     "av_x-v1_default",
                     "bitcraze_crazyflie21_default",
@@ -15,7 +15,6 @@
 	"extensions": [
 		"chiehyu.vscode-astyle",
 		"dan-c-underwood.arm",
-		"editorconfig.editorconfig",
 		"fredericbonnet.cmake-test-adapter",
 		"github.vscode-pull-request-github",
 		"marus25.cortex-debug",
@@ -1,7 +1,7 @@
 root = true

 [*]
-insert_final_newline = true
+insert_final_newline = false

 [{*.{c,cpp,cc,h,hpp},CMakeLists.txt,Kconfig}]
 indent_style = tab
@@ -4,7 +4,6 @@
    "recommendations": [
        "chiehyu.vscode-astyle",
        "dan-c-underwood.arm",
-        "editorconfig.editorconfig",
        "fredericbonnet.cmake-test-adapter",
        "github.vscode-pull-request-github",
        "marus25.cortex-debug",
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2017 - 2022 PX4 Development Team. All rights reserved.
+# Copyright (c) 2017 - 2024 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -132,7 +132,9 @@ list(GET VERSION_LIST 2 PX4_VERSION_PATCH)
 string(REPLACE "-" ";" PX4_VERSION_PATCH ${PX4_VERSION_PATCH})
 list(GET PX4_VERSION_PATCH 0 PX4_VERSION_PATCH)

-message(STATUS "PX4 version: ${PX4_GIT_TAG} (${PX4_VERSION_MAJOR}.${PX4_VERSION_MINOR}.${PX4_VERSION_PATCH})")
+# # Capture only the hash part after 'g'
+string(REGEX MATCH "g([a-f0-9]+)$" GIT_HASH "${PX4_GIT_TAG}")
+set(PX4_GIT_HASH ${CMAKE_MATCH_1})

 define_property(GLOBAL PROPERTY PX4_MODULE_LIBRARIES
                 BRIEF_DOCS "PX4 module libs"
@@ -1,6 +1,6 @@
 ############################################################################
 #
-# Copyright (c) 2015 - 2020 PX4 Development Team. All rights reserved.
+# Copyright (c) 2015 - 2024 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -323,7 +323,32 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status

-bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: \
+	ark_fmu-v6x_bootloader \
+	ark_pi6x_bootloader \
+	cuav_nora_bootloader \
+	cuav_x7pro_bootloader \
+	cubepilot_cubeorange_bootloader \
+	cubepilot_cubeorangeplus_bootloader \
+	hkust_nxt-dual_bootloader \
+	hkust_nxt-v1_bootloader \
+	holybro_durandal-v1_bootloader \
+	holybro_kakuteh7_bootloader \
+	holybro_kakuteh7mini_bootloader \
+	holybro_kakuteh7v2_bootloader \
+	matek_h743_bootloader \
+	matek_h743-mini_bootloader \
+	matek_h743-slim_bootloader \
+	modalai_fc-v2_bootloader \
+	mro_ctrl-zero-classic_bootloader \
+	mro_ctrl-zero-h7_bootloader \
+	mro_ctrl-zero-h7-oem_bootloader \
+	mro_pixracerpro_bootloader \
+	px4_fmu-v6c_bootloader \
+	px4_fmu-v6u_bootloader \
+	px4_fmu-v6x_bootloader \
+	px4_fmu-v6xrt_bootloader \
+	siyi_n7_bootloader
 	git status

 .PHONY: coverity_scan
@@ -72,6 +72,8 @@ if(CONFIG_MODULES_ROVER_POS_CONTROL)
 	px4_add_romfs_files(
 		rc.rover_apps
 		rc.rover_defaults
+
+		rc.boat_defaults # hack
 	)
 endif()

@@ -82,13 +84,6 @@ if(CONFIG_MODULES_DIFFERENTIAL_DRIVE)
 	)
 endif()

-if(CONFIG_MODULES_BOAT)
-	px4_add_romfs_files(
-		rc.boat_apps
-		rc.boat_defaults
-	)
-endif()
-
 if(CONFIG_MODULES_UUV_ATT_CONTROL)
 	px4_add_romfs_files(
 		rc.uuv_apps
@@ -1,59 +0,0 @@
-#!/bin/sh
-#
-# @name RC Boat
-#
-# @type Boat
-# @class Boat
-#
-# @output Servo1 Steering
-# @output Motor1 Throttle
-
-. ${R}etc/init.d/rc.boat_defaults
-
-# Failsafe
-param set-default NAV_RCL_ACT 6 # Disarm on stick input loss
-param set-default NAV_DLL_ACT 6 # Disarm on ground station loss
-param set-default COM_DL_LOSS_T 5 # timeout for ground station connection
-param set-default COM_RC_LOSS_T 10 # timeout for stick input
-param set-default COM_RCL_EXCEPT 1 # Continue mission without stick input
-
-param set-default COM_ARM_WO_GPS 1 # Disable GPS prearm check
-param set-default COM_DISARM_LAND -1 # Don't disarm automatically
-param set-default COM_DISARM_PRFLT -1
-
-# Steering PWM output
-param set-default PWM_AUX_FUNC1 201
-param set-default PWM_AUX_DIS1 1500
-param set-default PWM_AUX_MIN1 1000
-param set-default PWM_AUX_MAX1 2000
-# Engine throttle PWM output
-param set-default PWM_AUX_FUNC2 101
-param set-default PWM_AUX_DIS2 900
-param set-default PWM_AUX_MIN2 940 # Engine doesn't rev below that
-param set-default PWM_AUX_MAX2 2000 # Maximum trhottle at which it's not so easy to flip the boat
-
-param set-default CA_AIRFRAME 5
-
-# Estimation
-param set-default EKF2_MULTI_IMU 0 # Disable multi-IMU
-param set-default SENS_IMU_MODE 1
-param set-default CAL_MAG0_PRIO 0 # Disable internal Magnetometer
-param set-default MBE_ENABLE 0 # Disable online mag calibration when disarmed
-param set-default EKF2_GPS_CTRL 15 # Enable GPS heading fusion
-param set-default SENS_GPS_MASK 0 # Disable multi-GPS blending
-
-# Estimation workarounds, should be double-checked if necessary
-param set-default EKF2_GBIAS_INIT 0.01
-param set-default EKF2_SYNT_MAG_Z 1 # Why? Who said magnetometer Z is not usable?
-
-param set-default EKF2_GPS_V_NOISE 0.751 # Lower certainty for GPS
-param set-default EKF2_GPS_POS_X 2.5 # GPS position, accurate?
-param set-default EKF2_REQ_EPV 10 # Accept GPS easier
-param set-default EKF2_REQ_HDRIFT 1
-param set-default EKF2_REQ_SACC 2
-param set-default EKF2_REQ_VDRIFT 20
-
-param set-default EKF2_MAG_CHK_STR 0.5 # Accept mag easier
-param set-default COM_ARM_MAG_STR 0 # Disable magnetic field strength prearm check
-param set-default COM_ARM_MAG_ANG 360 # Disable internal/external magnetometer consistency check
-param set-default EKF2_ABL_LIM 1 # Higher accelerometer bias limit, was sometimes above the threshold, GPS reporting 0 altitude issue?
@@ -157,9 +157,3 @@ if(CONFIG_MODULES_UUV_ATT_CONTROL)
 		60002_uuv_bluerov2_heavy
 	)
 endif()
-
-if(CONFIG_MODULES_BOAT)
-	px4_add_romfs_files(
-		70001_boat
-	)
-endif()
@@ -1,11 +0,0 @@
-#!/bin/sh
-# Standard apps for a differential drive rover.
-
-# Start the attitude and position estimator.
-ekf2 start &
-
-# Start rover differential drive controller.
-boat start
-
-# Start Land Detector.
-land_detector start rover
@@ -5,7 +5,7 @@
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #

-set VEHICLE_TYPE boat
+set VEHICLE_TYPE rover

 # MAV_TYPE_SURFACE_BOAT 11
 param set-default MAV_TYPE 11
@@ -32,15 +32,6 @@ then
 	. ${R}etc/init.d/rc.rover_apps
 fi

-#
-# Boat setup.
-#
-if [ $VEHICLE_TYPE = boat ]
-then
-	# Start standard Boat apps.
-	. ${R}etc/init.d/rc.boat_apps
-fi
-
 #
 # Differential Rover setup.
 #
@@ -439,6 +439,14 @@ else
 	# Must be started after the serial config is read
 	rc_input start $RC_INPUT_ARGS

+	# Manages USB interface
+	if ! cdcacm_autostart start
+	then
+		sercon
+		echo "Starting MAVLink on /dev/ttyACM0"
+		mavlink start -d /dev/ttyACM0
+	fi
+
 	#
 	# Play the startup tune (if not disabled or there is an error)
 	#
@@ -6,7 +6,7 @@ function check_git_submodule {
 if [[ -f $1"/.git" || -d $1"/.git" ]]; then

 	# always update within CI environment or configuring withing VSCode CMake where you can't interact
-	if [ "$CI" == "true" ] || [ -n "${VSCODE_PID+set}" ] || [ -n "${CLION_IDE+set}" ]; then
+	if [ "$CI" == "true" ] || [ -n "${VSCODE_PID+set}" ]; then
 		git submodule --quiet sync --recursive -- $1
 		git submodule --quiet update --init --recursive --jobs=8 -- $1  || true
 		git submodule --quiet sync --recursive -- $1
@@ -34,23 +34,24 @@ def extract_timer(line):
    if search:
        return search.group(1), 'generic'

-    # NXP FlexPWM format format: initIOPWM(PWM::FlexPWM2),
-    search = re.search('PWM::Flex([0-9a-zA-Z_]+)..PWM::Submodule([0-9])[,\)]', line, re.IGNORECASE)
+    # nxp rt1062 format: initIOPWM(PWM::FlexPWM2),
+    search = re.search('PWM::Flex([0-9a-zA-Z_]+)[,\)]', line, re.IGNORECASE)
    if search:
-        return (search.group(1) + '_' +  search.group(2)), 'imxrt'
+        return search.group(1), 'imxrt'

    return None, 'unknown'

-def extract_timer_from_channel(line, timer_names):
+def extract_timer_from_channel(line, num_channels_already_found):
    # Try format: initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortA, GPIO::Pin0}),
    search = re.search('Timer::([0-9a-zA-Z_]+), ', line, re.IGNORECASE)
    if search:
        return search.group(1)

-    # NXP FlexPWM format: initIOTimerChannel(io_timers, {PWM::PWM2_PWM_A, PWM::Submodule0}, IOMUX::Pad::GPIO_B0_06),
-    search = re.search('PWM::(PWM[0-9]+).*PWM::Submodule([0-9])', line, re.IGNORECASE)
+    # nxp rt1062 format: initIOTimerChannel(io_timers, {PWM::PWM2_PWM_A, PWM::Submodule0}, IOMUX::Pad::GPIO_B0_06),
+    search = re.search('PWM::(PWM[0-9]+)[_,\)]', line, re.IGNORECASE)
    if search:
-        return str(timer_names.index((search.group(1) + '_' +  search.group(2))))
+        # imxrt uses a 1:1 timer group to channel association
+        return str(num_channels_already_found)

    return None

@@ -68,7 +69,6 @@ def get_timer_groups(timer_config_file, verbose=False):
    open_idx, close_idx = find_matching_brackets(('{', '}'), timer_config, verbose)
    timers_str = timer_config[open_idx:close_idx]
    timers = []
-    timer_names = []
    for line in timers_str.splitlines():
        line = line.strip()
        if len(line) == 0 or line.startswith('//'):
@@ -77,12 +77,14 @@ def get_timer_groups(timer_config_file, verbose=False):

        if timer_type == 'imxrt':
            if verbose: print('imxrt timer found')
-            timer_names.append(timer)
-            timers.append(str(len(timers)))
-            dshot_support = {str(i): False for i in range(16)}
+            max_num_channels = 16 # Just add a fixed number of timers
+            timers = [str(i) for i in range(max_num_channels)]
+            dshot_support = {str(i): False for i in range(max_num_channels)}
            for i in range(8): # First 8 channels support dshot
                dshot_support[str(i)] = True
-        elif timer:
+            break
+
+        if timer:
            if verbose: print('found timer def: {:}'.format(timer))
            dshot_support[timer] = 'DMA' in line
            timers.append(timer)
@@ -109,7 +111,7 @@ def get_timer_groups(timer_config_file, verbose=False):
            continue

        if verbose: print('--'+line+'--')
-        timer = extract_timer_from_channel(line, timer_names)
+        timer = extract_timer_from_channel(line, len(channel_timers))

        if timer:
            if verbose: print('Found timer: {:} in channel line {:}'.format(timer, line))
@@ -1,7 +1,7 @@
 #!/usr/bin/env python3
 ############################################################################
 #
-#   Copyright (c) 2012-2017 PX4 Development Team. All rights reserved.
+#   Copyright (c) 2012-2024 PX4 Development Team. All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions
@@ -50,9 +50,6 @@
 #       Currently only used for informational purposes.
 #

-# for python2.7 compatibility
-from __future__ import print_function
-
 import sys
 import argparse
 import binascii
@@ -70,35 +67,32 @@ from sys import platform as _platform
 try:
    import serial
 except ImportError as e:
-    print("Failed to import serial: " + str(e))
+    print(f"Failed to import serial: {e}")
    print("")
    print("You may need to install it using:")
-    print("    pip3 install --user pyserial")
+    print("    python -m pip install pyserial")
    print("")
    sys.exit(1)


-# Define time to use time.time() by default
-def _time():
-    return time.time()
-
 # Detect python version
 if sys.version_info[0] < 3:
-    runningPython3 = False
-else:
-    runningPython3 = True
-    if sys.version_info[1] >=3:
-        # redefine to use monotonic time when available
-        def _time():
-            try:
-                return time.monotonic()
-            except Exception:
-                return time.time()
+    raise RuntimeError("Python 2 is not supported. Please try again using Python 3.")
+    sys.exit(1)
+
+
+# Use monotonic time where available
+def _time():
+    try:
+        return time.monotonic()
+    except Exception:
+        return time.time()

 class FirmwareNotSuitableException(Exception):
    def __init__(self, message):
        super(FirmwareNotSuitableException, self).__init__(message)

+
 class firmware(object):
    '''Loads a firmware file'''

@@ -163,13 +157,13 @@ class firmware(object):

    def crc(self, padlen):
        state = self.__crc32(self.image, int(0))
-        for i in range(len(self.image), (padlen - 1), 4):
+        for _ in range(len(self.image), (padlen - 1), 4):
            state = self.__crc32(self.crcpad, state)
        return state


-class uploader(object):
-    '''Uploads a firmware file to the PX FMU bootloader'''
+class uploader:
+    '''Uploads a firmware file to the PX4 bootloader'''

    # protocol bytes
    INSYNC          = b'\x12'
@@ -195,6 +189,8 @@ class uploader(object):
    GET_CHIP        = b'\x2c'     # rev5+  , get chip version
    SET_BOOT_DELAY  = b'\x2d'     # rev5+  , set boot delay
    GET_CHIP_DES    = b'\x2e'     # rev5+  , get chip description in ASCII
+    GET_VERSION     = b'\x2f'     # rev5+  , get chip description in ASCII
+    CHIP_FULL_ERASE = b'\x40'     # full erase of flash, rev6+
    MAX_DES_LENGTH  = 20

    REBOOT          = b'\x30'
@@ -205,6 +201,7 @@ class uploader(object):
    INFO_BOARD_ID   = b'\x02'        # board type
    INFO_BOARD_REV  = b'\x03'        # board revision
    INFO_FLASH_SIZE = b'\x04'        # max firmware size in bytes
+    BL_VERSION      = b'\x07'        # get bootloader version, e.g. major.minor.patch.githash (up to 20 chars)

    PROG_MULTI_MAX  = 252            # protocol max is 255, must be multiple of 4
    READ_MULTI_MAX  = 252            # protocol max is 255
@@ -235,6 +232,7 @@ class uploader(object):
        self.baudrate_bootloader = baudrate_bootloader
        self.baudrate_flightstack = baudrate_flightstack
        self.baudrate_flightstack_idx = -1
+        self.force_erase = False

    def close(self):
        if self.port is not None:
@@ -357,19 +355,22 @@ class uploader(object):
            self.port.baudrate = self.baudrate_bootloader * 2.33
        except NotImplementedError as e:
            # This error can occur because pySerial on Windows does not support odd baudrates
-            print(str(e) + " -> could not check for FTDI device, assuming USB connection")
+            print(f"{e} -> could not check for FTDI device, assuming USB connection")
            return

        self.__send(uploader.GET_SYNC +
                    uploader.EOC)
        try:
            self.__getSync(False)
-        except:
+        except RuntimeError:
            # if it fails we are on a real serial port - only leave this enabled on Windows
            if sys.platform.startswith('win'):
                self.ackWindowedMode = True
        finally:
-            self.port.baudrate = self.baudrate_bootloader
+            try:
+                self.port.baudrate = self.baudrate_bootloader
+            except Exception:
+                pass

    # send the GET_DEVICE command and wait for an info parameter
    def __getInfo(self, param):
@@ -410,6 +411,17 @@ class uploader(object):
        pieces = value.split(b",")
        return pieces

+    def __getVersion(self):
+        self.__send(uploader.GET_VERSION + uploader.EOC)
+        try:
+            length = self.__recv_int()
+            value = self.__recv(length)
+            self.__getSync()
+        except RuntimeError:
+            # Bootloader doesn't support version call
+            return "unknown"
+        return value.decode()
+
    def __drawProgressBar(self, label, progress, maxVal):
        if maxVal < progress:
            progress = maxVal
@@ -421,10 +433,16 @@ class uploader(object):

    # send the CHIP_ERASE command and wait for the bootloader to become ready
    def __erase(self, label):
-        print("Windowed mode: %s" % self.ackWindowedMode)
+        print(f"Windowed mode: {self.ackWindowedMode}")
        print("\n", end='')
-        self.__send(uploader.CHIP_ERASE +
-                    uploader.EOC)
+
+        if self.force_erase:
+            print("Trying force erase of full chip...\n")
+            self.__send(uploader.CHIP_FULL_ERASE +
+                        uploader.EOC)
+        else:
+            self.__send(uploader.CHIP_ERASE +
+                        uploader.EOC)

        # erase is very slow, give it 30s
        deadline = _time() + 30.0
@@ -441,9 +459,14 @@ class uploader(object):

            if self.__trySync():
                self.__drawProgressBar(label, 10.0, 10.0)
+                if self.force_erase:
+                    print("\nForce erase done.\n")
                return

-        raise RuntimeError("timed out waiting for erase")
+        if self.force_erase:
+            raise RuntimeError("timed out waiting for erase, force erase is likely not supported by bootloader!")
+        else:
+            raise RuntimeError("timed out waiting for erase")

    # send a PROG_MULTI command to write a collection of bytes
    def __program_multi(self, data, windowMode):
@@ -581,8 +604,11 @@ class uploader(object):
        self.board_rev = self.__getInfo(uploader.INFO_BOARD_REV)
        self.fw_maxsize = self.__getInfo(uploader.INFO_FLASH_SIZE)

+        self.version = self.__getVersion()
+
    # upload the firmware
-    def upload(self, fw_list, force=False, boot_delay=None, boot_check=False):
+    def upload(self, fw_list, force=False, boot_delay=None, boot_check=False, force_erase=False):
+        self.force_erase = force_erase
        # select correct binary
        found_suitable_firmware = False
        for file in fw_list:
@@ -611,6 +637,8 @@ class uploader(object):
        print("Loaded firmware for board id: %s,%s size: %d bytes (%.2f%%) " % (fw.property('board_id'), fw.property('board_revision'), fw.property('image_size'), percent))
        print()

+        print(f"Bootloader version: {self.version}")
+
        # Make sure we are doing the right thing
        start = _time()
        if self.board_type != fw.property('board_id'):
@@ -640,14 +668,14 @@ class uploader(object):
            self.otp_coa = self.otp[32:160]
            # show user:
            try:
-                print("sn: ", end='')
+                print("Sn: ", end='')
                for byte in range(0, 12, 4):
                    x = self.__getSN(byte)
                    x = x[::-1]  # reverse the bytes
                    self.sn = self.sn + x
                    print(binascii.hexlify(x).decode('Latin-1'), end='')  # show user
                print('')
-                print("chip: %08x" % self.__getCHIP())
+                print("Chip: %08x" % self.__getCHIP())

                otp_id = self.otp_id.decode('Latin-1')
                if ("PX4" in otp_id):
@@ -657,17 +685,19 @@ class uploader(object):
                    print("OTP pid: " + binascii.hexlify(self.otp_pid).decode('Latin-1'))
                    print("OTP coa: " + binascii.b2a_base64(self.otp_coa).decode('Latin-1'))

-            except Exception:
+            except Exception as e:
                # ignore bad character encodings
+                print(f"Exception ignored: {e}")
                pass

        # Silicon errata check was added in v5
        if (self.bl_rev >= 5):
            des = self.__getCHIPDes()
            if (len(des) == 2):
-                print("family: %s" % des[0])
-                print("revision: %s" % des[1])
-                print("flash: %d bytes" % self.fw_maxsize)
+                family, revision = des
+                print(f"Family: {family.decode()}")
+                print(f"Revision: {revision.decode()}")
+                print(f"Flash: {self.fw_maxsize} bytes")

                # Prevent uploads where the maximum image size of the board config is smaller than the flash
                # of the board. This is a hint the user chose the wrong config and will lack features
@@ -678,8 +708,7 @@ class uploader(object):
                # https://github.com/PX4/Firmware/blob/master/src/drivers/boards/common/stm32/board_mcu_version.c#L125-L144

                if self.fw_maxsize > fw.property('image_maxsize') and not force:
-                    raise RuntimeError("Board can accept larger flash images (%u bytes) than board config (%u bytes). Please use the correct board configuration to avoid lacking critical functionality."
-                                       % (self.fw_maxsize, fw.property('image_maxsize')))
+                    raise RuntimeError(f"Board can accept larger flash images ({self.fw_maxsize} bytes) than board config ({fw.property('image_maxsize')} bytes). Please use the correct board configuration to avoid lacking critical functionality.")
        else:
            # If we're still on bootloader v4 on a Pixhawk, we don't know if we
            # have the silicon errata and therefore need to flash px4_fmu-v2
@@ -780,16 +809,13 @@ class uploader(object):


 def main():
-    # Python2 is EOL
-    if not runningPython3:
-        raise RuntimeError("Python 2 is not supported. Please try again using Python 3.")
-
    # Parse commandline arguments
    parser = argparse.ArgumentParser(description="Firmware uploader for the PX autopilot system.")
    parser.add_argument('--port', action="store", required=True, help="Comma-separated list of serial port(s) to which the FMU may be attached")
    parser.add_argument('--baud-bootloader', action="store", type=int, default=115200, help="Baud rate of the serial port (default is 115200) when communicating with bootloader, only required for true serial ports.")
    parser.add_argument('--baud-flightstack', action="store", default="57600", help="Comma-separated list of baud rate of the serial port (default is 57600) when communicating with flight stack (Mavlink or NSH), only required for true serial ports.")
    parser.add_argument('--force', action='store_true', default=False, help='Override board type check, or silicon errata checks and continue loading')
+    parser.add_argument('--force-erase', action="store_true", help="Do not perform the blank check, always erase every sector of the application space")
    parser.add_argument('--boot-delay', type=int, default=None, help='minimum boot delay to store in flash')
    parser.add_argument('--use-protocol-splitter-format', action='store_true', help='use protocol splitter format for reboot')
    parser.add_argument('firmware', action="store", nargs='+', help="Firmware file(s)")
@@ -867,9 +893,10 @@ def main():
                        # Windows, don't open POSIX ports
                        if "/" not in port:
                            up = uploader(port, args.baud_bootloader, baud_flightstack)
-                except Exception:
+                except Exception as e:
                    # open failed, rate-limit our attempts
                    time.sleep(0.05)
+                    print(f"Exception ignored: {e}")

                    # and loop to the next port
                    continue
@@ -884,10 +911,10 @@ def main():
                        up.identify()
                        found_bootloader = True
                        print()
-                        print("Found board id: %s,%s bootloader version: %s on %s" % (up.board_type, up.board_rev, up.bl_rev, port))
+                        print(f"Found board id: {up.board_type},{up.board_rev} bootloader protocol revision {up.bl_rev} on {port}")
                        break

-                    except Exception:
+                    except (RuntimeError, serial.SerialException):

                        if not up.send_reboot(args.use_protocol_splitter_format):
                            break
@@ -907,14 +934,14 @@ def main():

                try:
                    # ok, we have a bootloader, try flashing it
-                    up.upload(args.firmware, force=args.force, boot_delay=args.boot_delay)
+                    up.upload(args.firmware, force=args.force, boot_delay=args.boot_delay, force_erase=args.force_erase)

                    # if we made this far without raising exceptions, the upload was successful
                    successful = True

-                except RuntimeError as ex:
+                except RuntimeError as e:
                    # print the error
-                    print("\nERROR: %s" % ex.args)
+                    print(f"\n\nError: {e}")

                except FirmwareNotSuitableException:
                    unsuitable_board = True
@@ -12,6 +12,7 @@ CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
@@ -6,7 +6,6 @@
 param set-default CBRK_IO_SAFETY 0
 param set-default CANNODE_SUB_MBD 1
 param set-default CANNODE_SUB_RTCM 1
-param set-default GPS_1_GNSS 63
 param set-default MBE_ENABLE 1
 param set-default SENS_IMU_CLPNOTI 0

@@ -47,7 +47,7 @@
 #define GPIO_BTN_SAFETY       /* PB15 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_PORTB|GPIO_PIN15)

 /* Safety LED */
-#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)
+#define GPIO_LED_SAFETY       /* PA1  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN1)

 /* Tone alarm output. */
 #define TONE_ALARM_TIMER             2    /* timer 2 */
@@ -14,7 +14,6 @@ CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_COMMON_HYGROMETERS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
-CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20948=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_IRLOCK=y
@@ -8,6 +8,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
 CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
@@ -8,7 +8,9 @@ CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
+CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
@@ -32,19 +32,10 @@ then
 	param set-default SENS_TEMP_ID 2490378
 fi

-param set-default EKF2_BARO_DELAY 39
-param set-default EKF2_BARO_NOISE 0.9
-param set-default EKF2_HGT_REF 0
-param set-default EKF2_MAG_DELAY 60
-param set-default EKF2_MAG_NOISE 0.06
 param set-default EKF2_MULTI_IMU 2
 param set-default EKF2_OF_CTRL 1
-param set-default EKF2_OF_DELAY 28
 param set-default EKF2_OF_N_MIN 0.05
 param set-default EKF2_RNG_A_HMAX 25
-param set-default EKF2_RNG_DELAY 105
-param set-default EKF2_RNG_NOISE 0.03
 param set-default EKF2_RNG_QLTY_T 0.1
-param set-default EKF2_RNG_SFE 0.03

 param set-default SENS_FLOW_RATE 150
@@ -1,13 +1,13 @@
 CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_ROMFSROOT="cannode"
+CONFIG_BOARD_NO_HELP=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_DRIVERS_BAROMETER_BMP388=y
 CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
 CONFIG_DRIVERS_MAGNETOMETER_BOSCH_BMM150=y
-CONFIG_DRIVERS_MAGNETOMETER_ST_IIS2MDC=y
 CONFIG_DRIVERS_SAFETY_BUTTON=y
 CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
@@ -8,7 +8,4 @@ icm42688p -R 0 -s start

 bmp388 -I -b 1 start

-if ! iis2mdc -R 4 -I -b 1 start
-then
-	bmm150 -I -b 1 start
-fi
+bmm150 -I -b 1 start
@@ -2,6 +2,7 @@ CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
 CONFIG_BOARD_ARCHITECTURE="cortex-m7"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_MAIERTEK_MPC2520=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
 CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
@@ -3,6 +3,7 @@ CONFIG_BOARD_ARCHITECTURE="cortex-m4"
 CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BAROMETER_LPS25H=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L0X=y
 CONFIG_DRIVERS_GPS=y
@@ -4,6 +4,7 @@ CONFIG_BOARD_CONSTRAINED_FLASH=y
 CONFIG_BOARD_CONSTRAINED_MEMORY=y
 CONFIG_BOARD_COMPILE_DEFINITIONS="-Wno-narrowing"
 CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_VL53L1X=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088_I2C=y
@@ -7,12 +7,14 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_COMMON_BAROMETERS=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
@@ -6,6 +6,7 @@ CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS3"
 CONFIG_DRIVERS_ADC_ADS1115=y
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
@@ -11,9 +11,11 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -194,6 +194,12 @@

 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */

+/* UART clock selection */
+/* reset to default to overwrite any changes done by any bootloader */
+
+#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
+#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
+
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -11,9 +11,11 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20649=y
@@ -195,6 +195,12 @@

 #define STM32_RCC_D3CCIPR_ADCSRC     RCC_D3CCIPR_ADCSEL_PLL2     /* ADC 1 2 3 clock source */

+/* UART clock selection */
+/* reset to default to overwrite any changes done by any bootloader */
+
+#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
+#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
+
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -12,6 +12,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -8,6 +8,7 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
@@ -12,6 +12,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -97,9 +97,9 @@
 #define INTERFACE_USART_CONFIG         "/dev/ttyS5,57600"
 #define BOOT_DELAY_ADDRESS             0x000001a0
 #define BOARD_TYPE                     1013
-#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
-#define BOARD_FLASH_SECTORS            (15)
-#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
+#define BOARD_FLASH_SECTORS            (14)
+#define BOARD_FLASH_SIZE               (16 * 128 * 1024)
+#define APP_RESERVATION_SIZE 	       (1 * 128 * 1024)

 #define OSC_FREQ                       16

@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,6 +9,7 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -11,6 +11,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS5"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
@@ -8,6 +8,7 @@ CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -12,6 +12,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -12,6 +12,7 @@ CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
@@ -9,7 +9,7 @@ When running PX4 directly on the QRB5165 SoC it runs partially on the Sensor Low
 The portion running on the DSP hosts the flight critical portions of PX4 such as
 the IMU, barometer, magnetometer, GPS, ESC, and power management drivers, and the
 state estimation. The DSP acts as the real time portion of the system. Non flight
-critical applications such as Mavlink, and logging are running on the
+critical applications such as Mavlink, logging, and commander are running on the
 ARM CPU cluster (aka apps proc). The DSP and ARM CPU cluster communicate via a
 Qualcomm proprietary shared memory interface.

@@ -27,7 +27,6 @@ The full instructions are available here:
 ```
 px4$ boards/modalai/voxl2/scripts/run-docker.sh
 root@9373fa1401b8:/usr/local/workspace# boards/modalai/voxl2/scripts/clean.sh
-root@9373fa1401b8:/usr/local/workspace# boards/modalai/voxl2/scripts/build-deps.sh
 root@9373fa1401b8:/usr/local/workspace# boards/modalai/voxl2/scripts/build-apps.sh
 root@9373fa1401b8:/usr/local/workspace# boards/modalai/voxl2/scripts/build-slpi.sh
 root@9373fa1401b8:/usr/local/workspace# exit
@@ -70,15 +69,16 @@ pxh>
 ## Notes

 You cannot cleanly shutdown PX4 with the shutdown command on VOXL 2. You have
-to power cycle the board and restart everything. Starting with SDK 1.3.0 it is possible
-to cleanly shutdown PX4 on VOXL 2.
+to power cycle the board and restart everything.

 ## Tips

-Always use the latest SDK release
+Start with a VOXL 2 that only has the system image installed, not the SDK
+
+Run the command ```voxl-px4 -s``` on target to run the self-test

 In order to see DSP specific debug messages the mini-dm tool in the Hexagon SDK
-can be used (Most messages are passed to the apps proc but certain low level messages are not):
+can be used:
 ```
 modalai@modalai-XPS-15-9570:/local/mnt/workspace/Qualcomm/Hexagon_SDK/4.1.0.4/tools/debug/mini-dm/Ubuntu18$ sudo ./mini-dm
 [sudo] password for modalai:
@@ -20,6 +20,7 @@ adb shell chmod a+x /usr/bin/voxl-px4-hitl-start

 # Push configuration file
 adb shell mkdir -p /etc/modalai
+adb push boards/modalai/voxl2/target/voxl-px4-set-default-parameters.config /etc/modalai
 adb push boards/modalai/voxl2/target/voxl-px4-fake-imu-calibration.config /etc/modalai
 adb push boards/modalai/voxl2/target/voxl-px4-hitl-set-default-parameters.config /etc/modalai

@@ -129,6 +129,12 @@ else
    DAEMON="-d"
 fi

+if [ ! -f /data/px4/param/parameters ]; then
+   echo "[INFO] Setting default parameters for PX4 on voxl"
+   px4 $DAEMON -s /etc/modalai/voxl-px4-set-default-parameters.config
+   /bin/sync
+fi
+
 if [ $SENSOR_CAL == "FAKE" ]; then
   /bin/echo "[INFO] Setting up fake sensor calibration values"
   px4 $DAEMON -s /etc/modalai/voxl-px4-fake-imu-calibration.config
@@ -0,0 +1,192 @@
+#!/bin/sh
+# PX4 commands need the 'px4-' prefix in bash.
+# (px4-alias.sh is expected to be in the PATH)
+. px4-alias.sh
+
+param select /data/px4/param/parameters
+
+# Make sure we are running at 800Hz on IMU
+param set IMU_GYRO_RATEMAX 800
+
+# EKF2 Parameters
+param set EKF2_IMU_POS_X 0.027
+param set EKF2_IMU_POS_Y 0.009
+param set EKF2_IMU_POS_Z -0.019
+param set EKF2_EV_DELAY 5
+param set EKF2_AID_MASK 280
+param set EKF2_ABL_LIM 0.8
+param set EKF2_TAU_POS 0.25
+param set EKF2_TAU_VEL 0.25
+
+param set MC_AIRMODE 0
+
+param set MC_YAW_P 2.0
+param set MC_YAWRATE_P 0.15
+param set MC_YAWRATE_I 0.1
+param set MC_YAWRATE_D 0.0
+param set MC_YAWRATE_K 1.0
+
+param set MC_PITCH_P 5.5
+param set MC_PITCHRATE_P 0.08
+param set MC_PITCHRATE_I 0.2
+param set MC_PITCHRATE_D 0.0013
+param set MC_PITCHRATE_K 1.0
+
+param set MC_ROLL_P 5.5
+param set MC_ROLLRATE_P 0.08
+param set MC_ROLLRATE_I 0.2
+param set MC_ROLLRATE_D 0.0013
+param set MC_ROLLRATE_K 1.0
+
+param set MPC_VELD_LP 5.0
+
+# tweak MPC_THR_MIN to prevent roll/pitch losing control
+# authority under rapid downward acceleration
+param set MPC_THR_MAX 0.75
+param set MPC_THR_MIN 0.08
+param set MPC_THR_HOVER 0.42
+param set MPC_MANTHR_MIN 0.05
+
+# default position mode with a little expo, smooth mode is terrible
+param set MPC_POS_MODE 0
+param set MPC_YAW_EXPO 0.20
+param set MPC_XY_MAN_EXPO 0.20
+param set MPC_Z_MAN_EXPO 0.20
+
+# max velocities
+param set MPC_VEL_MANUAL 5.0
+param set MPC_XY_VEL_MAX 5.0
+param set MPC_XY_CRUISE 5.0
+param set MPC_Z_VEL_MAX_DN 1.5
+param set MPC_Z_VEL_MAX_UP 4.0
+param set MPC_LAND_SPEED 1.0
+
+# Horizontal position PID
+param set MPC_XY_P 0.95
+param set MPC_XY_VEL_P_ACC 3.00
+param set MPC_XY_VEL_I_ACC 0.10
+param set MPC_XY_VEL_D_ACC 0.00
+
+# Vertical position PID
+# PX4 Defaults
+param set MPC_Z_P 1.0
+param set MPC_Z_VEL_P_ACC 8.0
+param set MPC_Z_VEL_I_ACC 2.0
+param set MPC_Z_VEL_D_ACC 0.0
+
+param set MPC_TKO_RAMP_T 1.50
+param set MPC_TKO_SPEED	1.50
+
+# Set the ESC outputs to function as motors
+param set VOXL_ESC_FUNC1 101
+param set VOXL_ESC_FUNC2 103
+param set VOXL_ESC_FUNC3 104
+param set VOXL_ESC_FUNC4 102
+
+param set VOXL_ESC_SDIR1 0
+param set VOXL_ESC_SDIR2 0
+param set VOXL_ESC_SDIR3 0
+param set VOXL_ESC_SDIR4 0
+
+param set VOXL_ESC_CONFIG 1
+param set VOXL_ESC_REV 0
+param set VOXL_ESC_MODE 0
+param set VOXL_ESC_BAUD 2000000
+param set VOXL_ESC_RPM_MAX 10500
+param set VOXL_ESC_RPM_MIN 1000
+
+# Set the Voxl2 IO outputs to function as motors
+param set VOXL2_IO_FUNC1 101
+param set VOXL2_IO_FUNC2 102
+param set VOXL2_IO_FUNC3 103
+param set VOXL2_IO_FUNC4 104
+
+param set VOXL2_IO_BAUD 921600
+param set VOXL2_IO_MIN 1000
+param set VOXL2_IO_MAX 2000
+
+# Some parameters for control allocation
+param set CA_ROTOR_COUNT 4
+param set CA_R_REV 0
+param set CA_AIRFRAME 0
+param set CA_ROTOR_COUNT 4
+param set CA_ROTOR0_PX 0.15
+param set CA_ROTOR0_PY 0.15
+param set CA_ROTOR1_PX -0.15
+param set CA_ROTOR1_PY -0.15
+param set CA_ROTOR2_PX 0.15
+param set CA_ROTOR2_PY -0.15
+param set CA_ROTOR2_KM -0.05
+param set CA_ROTOR3_PX -0.15
+param set CA_ROTOR3_PY 0.15
+param set CA_ROTOR3_KM -0.05
+
+# Some parameter settings to disable / ignore certain preflight checks
+
+# No GPS driver yet so disable it
+param set SYS_HAS_GPS 0
+
+# Allow arming wihtout a magnetometer (Need magnetometer driver)
+param set SYS_HAS_MAG 0
+param set EKF2_MAG_TYPE	5
+
+# Allow arming without battery check (Need voxlpm driver)
+param set CBRK_SUPPLY_CHK 894281
+
+# Allow arming without an SD card
+param set COM_ARM_SDCARD 0
+
+# Allow arming wihtout CPU load information
+param set COM_CPU_MAX 0.0
+
+# Disable auto disarm. This is number of seconds to wait for takeoff
+# after arming. If no takeoff happens then it will disarm. A negative
+# value disables this.
+param set COM_DISARM_PRFLT -1
+
+# This parameter doesn't exist anymore. Need to see what the new method is.
+# param set MAV_BROADCAST 0
+
+# Doesn't work without setting this to Quadcopter
+param set MAV_TYPE 2
+
+# Parameters that we don't use but QGC complains about if they aren't there
+param set SYS_AUTOSTART 4001
+
+# Default RC channel mappings
+param set RC_MAP_ACRO_SW 0
+param set RC_MAP_ARM_SW 0
+param set RC_MAP_AUX1 0
+param set RC_MAP_AUX2 0
+param set RC_MAP_AUX3 0
+param set RC_MAP_AUX4 0
+param set RC_MAP_AUX5 0
+param set RC_MAP_AUX6 0
+param set RC_MAP_FAILSAFE 0
+param set RC_MAP_FLAPS 0
+param set RC_MAP_FLTMODE 6
+param set RC_MAP_GEAR_SW 0
+param set RC_MAP_KILL_SW 7
+param set RC_MAP_LOITER_SW 0
+param set RC_MAP_MAN_SW 0
+param set RC_MAP_MODE_SW 0
+param set RC_MAP_OFFB_SW 0
+param set RC_MAP_PARAM1 0
+param set RC_MAP_PARAM2 0
+param set RC_MAP_PARAM3 0
+param set RC_MAP_PITCH 2
+param set RC_MAP_POSCTL_SW 0
+param set RC_MAP_RATT_SW 0
+param set RC_MAP_RETURN_SW 0
+param set RC_MAP_ROLL 1
+param set RC_MAP_STAB_SW 0
+param set RC_MAP_THROTTLE 3
+param set RC_MAP_TRANS_SW 0
+param set RC_MAP_YAW 4
+
+param save
+
+sleep 2
+
+# Need px4-shutdown otherwise Linux system shutdown is called
+px4-shutdown
@@ -12,6 +12,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -197,6 +197,12 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

+/* UART clock selection */
+/* reset to default to overwrite any changes done by any bootloader */
+
+#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
+#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
+
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -10,6 +10,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -9,6 +9,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,6 +10,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -197,6 +197,12 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

+/* UART clock selection */
+/* reset to default to overwrite any changes done by any bootloader */
+
+#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
+#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
+
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -10,6 +10,7 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -196,6 +196,12 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

+/* UART clock selection */
+/* reset to default to overwrite any changes done by any bootloader */
+
+#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
+#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
+
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -9,9 +9,11 @@ CONFIG_DRIVERS_BAROMETER_DPS310=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI085=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
@@ -196,6 +196,12 @@

 #define STM32_FDCANCLK               STM32_HSE_FREQUENCY

+/* UART clock selection */
+/* reset to default to overwrite any changes done by any bootloader */
+
+#define STM32_RCC_D2CCIP2R_USART234578_SEL RCC_D2CCIP2R_USART234578SEL_RCC
+#define STM32_RCC_D2CCIP2R_USART16_SEL     RCC_D2CCIP2R_USART16SEL_RCC
+
 /* FLASH wait states */
 #define BOARD_FLASH_WAITSTATES 2

@@ -9,6 +9,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,6 +10,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -11,6 +11,7 @@ CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
@@ -11,6 +11,7 @@ CONFIG_DRIVERS_BAROMETER_MPL3115A2=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_SRF05=y
@@ -7,6 +7,7 @@ CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
@@ -9,6 +9,8 @@ CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS2"
 CONFIG_BOARD_SERIAL_TEL4="/dev/ttyS6"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_MS5611=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_ST_L3GD20=y
@@ -11,9 +11,11 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
@@ -11,9 +11,11 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
@@ -12,6 +12,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,6 +10,7 @@ CONFIG_COMMON_BAROMETERS=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -6,6 +6,7 @@ CONFIG_COMMON_OPTICAL_FLOW=n
 CONFIG_COMMON_TELEMETRY=n
 CONFIG_DRIVERS_CAMERA_CAPTURE=n
 CONFIG_DRIVERS_CAMERA_TRIGGER=n
+CONFIG_DRIVERS_CDCACM_AUTOSTART=n
 CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
 CONFIG_DRIVERS_PWM_INPUT=n
@@ -1,17 +0,0 @@
-CONFIG_DRIVERS_IRLOCK=n
-CONFIG_MODULES_AIRSPEED_SELECTOR=n
-CONFIG_MODULES_BOAT=y
-CONFIG_MODULES_FLIGHT_MODE_MANAGER=n
-CONFIG_MODULES_FW_ATT_CONTROL=n
-CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_FW_POS_CONTROL=n
-CONFIG_MODULES_FW_RATE_CONTROL=n
-CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=n
-CONFIG_MODULES_MC_ATT_CONTROL=n
-CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=n
-CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=n
-CONFIG_MODULES_MC_POS_CONTROL=n
-CONFIG_MODULES_MC_RATE_CONTROL=n
-CONFIG_MODULES_VTOL_ATT_CONTROL=n
-CONFIG_EKF2_AUX_GLOBAL_POSITION=y
-# CONFIG_EKF2_WIND is not set
@@ -14,6 +14,7 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
@@ -10,9 +10,11 @@ CONFIG_DRIVERS_BAROMETER_MS5611=y
 CONFIG_DRIVERS_BATT_SMBUS=y
 CONFIG_DRIVERS_CAMERA_CAPTURE=y
 CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_DRIVERS_CDCACM_AUTOSTART=y
 CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GNSS_SEPTENTRIO=y
 CONFIG_DRIVERS_GPS=y
 CONFIG_DRIVERS_HEATER=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI055=y
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Alexis Guijarro	4817c0618a	mRo boards: Fix for USART clock selection (#23524 )	2024-11-06 12:20:00 -08:00
QiTao Weng	e85ffa0991	Add airspeed message to uxrce dds topics (#23847 ) Co-authored-by: Weng <q350w358@ENGR-GQT56X3-X.home.ku.edu>	2024-11-04 19:18:29 -09:00
Silvan Fuhrer	aa25964942	Navigator: land: set lat/lon fields of triplet to NAN if global position is not valid Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-10-31 13:34:45 +01:00
Julian Oes	53dda3576b	boards: add Septentrio GNSS drivers to 6XRT	2024-10-29 19:58:01 +13:00
Julian Oes	31582270ae	boards: add Sepentrio GNSS drivers to 6C and 6X	2024-10-29 19:58:01 +13:00
Jacob Dahl	93eef0c787	set file descriptor to -1 after close()	2024-10-01 13:13:18 -04:00
alexklimaj	dd5e81470c	failure detector use per index esc current	2024-09-30 15:45:56 -04:00
Mathieu Bresciani	1d06f62399	fix VehicleCommand.msg syntax	2024-09-30 15:28:24 -04:00
Daniel Agar	f5f7dfc45e	commander: ignore REQUEST_CAMERA_INFORMATION - add answer command logging	2024-09-30 15:28:24 -04:00
Ramon Roche	cf1c03e412	drivers/gnss/septentrio: disable default assignment of GPS1	2024-09-25 06:54:51 -07:00
Ramon Roche	30e763b678	Commander: lock down mav sys and comp id - keeps them as local params at init - only allow to set at init	2024-08-27 15:27:32 -04:00
Julian Oes	fe26cdebc0	stm32h7: Reset USART clock selection (#23498 ) (#23516 ) This resets the USARTs' clock source selection to the default, in case it has been changed by the bootloader. This is required if booting from the ArduPilot bootloader which happens to reset the clock selection to PLL. Without this fix, UARTs (including the console) is garbled, so presumably at an invalid baudrate.	2024-08-09 10:25:19 +12:00
Silvan Fuhrer	631f36b1ee	TECS: reduce default of FW_T_SPD_STD to reduce airspeed measurement delay Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-08-07 17:45:20 +02:00
Beat Küng	96cddf5ed1	fix metadata.cmake: add missing paths to json & xml parameter outputs (#23464 )	2024-08-07 08:39:43 +02:00
chiara-septentrio	5216453b39	drivers/gnss/septentrio : 1.15-compatible extracted septentrio driver, with new features and fixes (#23386 ) Co-authored-by: Chiara de Saint Giniez <chiarastginiez@gmail.com>	2024-07-25 11:39:38 -04:00
David Sidrane	3dc97908db	spracing_h7extreme:rcc Tack upstream name fix	2024-07-15 13:52:44 +02:00
Matthias Grob	762d87285c	Jankinsfile-compile: add missing comma after `ark_pi6x_default`	2024-07-15 13:52:44 +02:00
Matthias Grob	5216d5c569	SubscriptionInterval: move updated, update, copy function to a cpp file Saves 17.3 kilobytes of flash 😮	2024-07-15 11:31:52 +02:00
Matthias Grob	920005a235	uORB: SubscriptionInterval fix timestamp wrapping when initializing less than the interval time after boot (#23384 ) * SubscriptionInterval: ensure _last_update is never before timer start	2024-07-11 16:36:55 +02:00
Peter van der Perk	50dd011c5e	Update NuttX Backports: stm32h755II backport stm32h7: allow Ethernet MAC without PHY imxrt: imxrt11xx set core clock to 1p15v regardless of ocotp imxrt: Correctly update PLL, bit has to toggled instead of being set	2024-07-10 22:00:47 -04:00
Peter van der Perk	e00101b771	[BACKPORT] imxrt: Change PLL settings for more accurate dshot timing	2024-07-10 22:00:47 -04:00
Peter van der Perk	c8fedda09a	[BACKPORT] fmu-v6xrt: MTD use full FRAM (32KB)	2024-07-10 22:00:47 -04:00
alexklimaj	de07e2bef0	boards ark pi6x add vl53l0x	2024-06-26 17:09:48 -04:00
fury1895	9a422dbfe8	gimbal - input_mavlink: return NoUpdate by default	2024-06-19 14:49:04 +02:00
Julian Oes	e2558046b8	mavlink: enable gimbal controls in QGC over USB	2024-06-11 15:08:38 +12:00
Julian Oes	00b6df1de5	gimbal: fix auto RC and MAVLink mode This fixes various edge cases when input is set to both: RC and MAVLink gimbal protocol v2. Specifically: - We no longer immediately reset primary control if there is no update, otherwise this will reset immediately after an commands. - Talking of commands: GIMBAL_MANAGER_CONFIGURE no longer switches control to MAVLink but only an actual incoming setpoint command does. - And incoming setpoint command only triggers UpdatedActiveOnce which means we will check RC again afterwards and if there is big movement switch back to RC. That's the intuitive thing to do until we have better reporting about who/what is in control. - Also, with RC we no longer always set us to be in control but only on major movement.	2024-06-11 15:08:38 +12:00
Jacob Dahl	061373f45b	cdcacm_autostart: handle USB power only	2024-06-07 08:05:15 -04:00
Silvan Fuhrer	f3787708d7	VTOL: remove _dt passing as it's no longer used (and was wrong) Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-06-06 21:52:40 -04:00
Silvan Fuhrer	4fe51d4911	VTOL Standard: fix transition pusher motor slew rate Signed-off-by: Silvan Fuhrer <silvan@auterion.com>	2024-06-06 21:52:40 -04:00
Julian Oes	71bf06af56	boards: update all bootloaders	2024-06-07 09:24:40 +12:00
Peize-Liu	5f2568231d	[Fix][hkust_nxt-dual]:board hkust_nxt-dual fix hw_config.h missing APP_RESERVATION_SIZE param (#23204 )	2024-06-07 09:24:40 +12:00
Julian Oes	ce9109cf5e	Makefile: add missing bootloader targets Quite a few were missing, and everything on one line was hard to diff.	2024-06-07 09:24:40 +12:00
David Sidrane	ec2c91fa90	nxp/imxrt_common/main:Fix Breakage from `a9962dc`	2024-06-07 09:24:40 +12:00
Julian Oes	9f07f2a076	px_uploader: catch serial exception correctly Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Julian Oes	9dc3f6ea12	bootloader: remove unused/duplicate defines	2024-06-07 09:24:40 +12:00
Julian Oes	0d957e9e87	bootloader: track ArduPilot protocol Just so we don't conflict on these commands in the future.	2024-06-07 09:24:40 +12:00
Julian Oes	62e61a3d7e	px_uploader.py: clean up various tidbits Includes: - Remove some of the outdated Python2 checks and compatibility. - Try not catch all exceptions but only the expected ones. Otherwise, this makes it really hard to debug if anything unexpected actually goes wrong. - Make use of fstrings. - Make output slightly prettier. Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Julian Oes	cc83186dcc	bootloader: add bootloader version This adds a new protocol extension which allows to get the bootloader version. The bootloader version is different from the bootloader protocol revision which has stabilized at 5 and is not easy to update unless a bootloader is actually breaking the protocol. The reason being that both the Python script as well as the uploader used in QGC will not attempt to load firmware if they don't know the bootloader version, so it could basically be considered a "breaking" protocol revision. Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Julian Oes	eb9fd7ec76	tools/bootloader: add force-erase option If the STM32H7 fails to program or erase a full chunk of 256 bytes, the ECC check will trigger a busfault when trying to read from it. To speed up erasing and optimize wear, we read before erasing to check if it actually needs erasing. That's when a busfault happens and the erase time outs. The workaround is to add an option to do a full erase without check. Credit goes to: https://github.com/ArduPilot/ardupilot/pull/22090 And the protocol option added to the bootloader is the same as for ArduPilot, so compatible. Signed-off-by: Julian Oes <julian@oes.ch>	2024-06-07 09:24:40 +12:00
Peter van der Perk	d8655fdde9	[BACKPORT] fmu-v6xrt: Support RC telemetry	2024-06-05 11:15:45 -04:00
Peter van der Perk	d8b6b2a5ad	[BACKPORT] fmu-v6xrt: Fix flash configuration Fixes correct dummy cycle count of 20	2024-06-05 11:15:45 -04:00
David Sidrane	ef9b1b75c3	[BACKPORT] Update px4_fmu-v6xrt Bootloader	2024-06-05 11:15:45 -04:00
David Sidrane	f10650e114	[BACKPORT] px4_fmu-v6xrt & bootloader:Bootloader enusres that ITCM memory is writable before jump to APP	2024-06-05 11:15:45 -04:00
David Sidrane	82a259cebe	[BACKPORT] bootloader/common/bl.c:Fixed Wrong vec_base caculation - only effects imxrt	2024-06-05 11:15:45 -04:00
David Sidrane	5903a815b7	NuttX with imxrt:lpuart & 1170 MPU Backports [BACKPORT] imxrt: lpuart singlewire transfer support These correctly enables mpu_rest on MPU init if CONFIG_ARM_MPU_RESET is defined. [BACKPORT] imxrt: 1170 MPU config ensure no lockups can occur [BACKPORT] armv{7\|8}-{m\|r}:MPU fix CONFIG naming to include ARM	2024-06-05 11:15:45 -04:00
Peter van der Perk	b5e5b2a186	[BACKPORT] dronecan: SocketCAN driver check size before copying Avoids memory corruption if we get packets to big	2024-06-05 11:15:45 -04:00
Peter van der Perk	901ac16583	[BACKPORT] fmu-v6xrt: Add I2C driver launcher	2024-06-05 11:15:45 -04:00
Peter van der Perk	27ed745b95	[BACKPORT] fmu-v6xrt: Enable debug features for more verbose hardfault output	2024-06-05 11:15:45 -04:00
David Sidrane	0ca57a5547	NuttX with imxrt_sd-preflight backport	2024-06-05 11:15:45 -04:00
David Sidrane	d182b202c8	[BACKPORT] px4_fmu-v6xrt:Support_MMCSD_MULTIBLOCK with preflight	2024-06-05 11:15:45 -04:00
alexklimaj	192bbd177b	airframes: dexi remove EKF2_HGT_REF default	2024-05-29 20:39:10 -04:00
alexklimaj	bb1f104a1a	boards: ark-pi6x remove ekf delay param defaults	2024-05-29 11:23:16 -04:00
Jacob Dahl	e173520273	boards: ark: pi6x: CONFIG_DRIVERS_CDCACM_AUTOSTART=y (#23163 )	2024-05-29 11:23:16 -04:00
Jacob Dahl	b8e43e1649	[mavlink] Parameter to always start on USB (#22234 ) * usb: Added parameter to enable always starting mavlink on USB. Refactored cdcacm_init into a module and added a paramter to allow always starting mavlink on USB, also added a paramter to choose the mode. The current default behavior is to wait and listen for data on USB and auto-detect the protocol (mavlink, nsh, ublox). This results in the mavlink stream not starting until something else on the mavlink network sends a packet first. The new default behavior is to always start mavlink. Added parameters MAV_USB_ENABLE -- default 1 (always start mavlink on USB) MAV_USE_MODE -- default 3 (onboard) * added 3 retries for opening serial port in mavlink, removed sleep before sercon * added DRIVERS_CDCACM_AUTOSTART to ark-v6x default.px4board * added CONFIG_DRIVERS_CDCACM_AUTOSTART=y to default.px4board for boards with CONFIG_CDCACM in their nsh/defconfig * format * remove PGA460 from COMMON_DISTANCE_SENSOR to save flash * remove LIS2MDL from COMMON_MAGNETOMETER to save flash * disable CONFIG_DRIVERS_CDCACM_AUTOSTART for fmu-v5 protected.px4board * moved and renamed parameters, removed mode logic in mavlink * changed parameter names, added mode none * remove parameters from mavlink	2024-05-29 11:23:16 -04:00
alexklimaj	a59b6fe5e9	boards: add iis2mdc mag to ark pi6x	2024-05-29 11:23:16 -04:00
Jacob Dahl	3b0a712c70	drivers/magnetometer: new ST IIS2MDC Magnetometer driver	2024-05-29 11:23:16 -04:00
Alexis Guijarro	60138da56b	mRo Control Zero Classic: Definition for GPS2 by default added	2024-05-23 18:29:10 -07:00