[RFC] NuttX use littlefs for F-RAM parameter storage

The integrator now absorbs properly the change in hover thrust

.ci/Jenkinsfile-compile

@@ -170,7 +170,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
             try {
               sh('export')
               checkout(scm)
-              sh('make distclean')
+              sh('make distclean; git clean -ff -x -d .')
               sh('git fetch --tags')
               sh('ccache -s')
               sh('make ' + target)
@@ -187,7 +187,7 @@ def createBuildNode(Boolean archive, String docker_image, String target) {
               throw (exc)
             }
             finally {
-              sh('make distclean')
+              sh('make distclean; git clean -ff -x -d .')
             }
           }
         }

.ci/Jenkinsfile-hardware

@@ -25,7 +25,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -73,8 +73,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cubepilot_cubeorange_test/cubepilot_cubeorange_test.elf || true'
                 }
               }
             } // stage test
@@ -99,7 +102,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -142,8 +145,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/cuav_x7pro_test/cuav_x7pro_test.elf || true'
                 }
               }
             } // stage test
@@ -168,7 +174,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -211,8 +217,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v3_test/px4_fmu-v3_test.elf || true'
                 }
               }
             } // stage test
@@ -237,7 +246,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -279,8 +288,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4_test/px4_fmu-v4_test.elf || true'
                 }
               }
             } // stage test
@@ -305,7 +317,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -348,8 +360,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v4pro_test/px4_fmu-v4pro_test.elf || true'
                 }
               }
             } // stage test
@@ -374,7 +389,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -407,7 +422,7 @@ pipeline {
 
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v"'
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -u -v" || true'
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_stress"'
 
                     // test dataman
@@ -426,7 +441,6 @@ pipeline {
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                     checkStatus()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                   }
@@ -438,8 +452,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_debug/px4_fmu-v5_debug.elf || true'
                 }
               }
             } // stage test
@@ -464,7 +481,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -508,7 +525,6 @@ pipeline {
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 200" || true' // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0" || true'       // limit cpu usage
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_1_CONFIG 0" || true'       // limit cpu usage
-                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
                     checkStatus()
                     sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io status" || true'
                   }
@@ -520,8 +536,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_stackcheck/px4_fmu-v5_stackcheck.elf || true'
                 }
               }
             } // stage test
@@ -546,7 +565,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -589,8 +608,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/px4_fmu-v5_test/px4_fmu-v5_test.elf || true'
                 }
               }
             } // stage test
@@ -615,7 +637,7 @@ pipeline {
               }
               post {
                 always {
-                    sh 'make distclean'
+                  sh 'make distclean; git clean -ff -x -d .'
                 }
               }
             } // stage build
@@ -658,8 +680,11 @@ pipeline {
                 }
               }
               post {
+                failure {
+                  sh 'cat /tmp/pyserial_spy_file.txt'
+                }
                 always {
-                    sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
+                  sh './platforms/nuttx/Debug/jlink_gdb_backtrace_simple.sh build/nxp_fmuk66-v3_test/nxp_fmuk66-v3_test.elf || true'
                 }
               }
             } // stage test
@@ -685,7 +710,7 @@ void checkoutSCM() {
   retry(3) {
     checkout scm
     sh 'export'
-    sh 'make distclean'
+    sh 'make distclean; git clean -ff -x -d .'
     sh 'git fetch --tags'
     sh 'ccache -z'
   }
@@ -722,26 +747,33 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show SYS*"'
 
   // run logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger on"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sleep 1"' // sleep before continuing
   // status commands
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/meminfo"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/uptime"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander check" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "commander status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman status"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ekf2 status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "free"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "gps status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload; top once; listener cpuload"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger status"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /bin"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /dev"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /etc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /obj"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status streams" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mavlink status" || true'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount"'
@@ -762,7 +794,7 @@ void checkStatus() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ver all"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "work_queue status"'
   // stop logger
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off" || true'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "logger off"'
 }
 
 void resetParameters() {
@@ -774,7 +806,7 @@ void resetParameters() {
 void runTests() {
 
   // test loading a range of airframes
-  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 6001 8001 10016'
+  sh './Tools/HIL/test_airframes.sh `find /dev/serial -name *usb-*` 1000 1001 2100 3000 4001 4018 6001 8001 10016'
 
   resetParameters()
 
@@ -796,13 +828,10 @@ void runTests() {
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "tests file" || true'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd readtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd rwtest"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mtd erase"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params/parameters.bson"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params/parameters.bson"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params/parameters.bson"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/mtd_params/parameters.bson"'
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench"'
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sd_bench -v"'
@@ -819,24 +848,7 @@ void runTests() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "sensors stop"' // ignore irrelevant sensor timeouts during microbenchmarks
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "microbench all"'
 
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
-
-  // test rebooting multiple times
-  resetParameters()
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param show CBRK*; param show SYS*"' // check that CBRK_BUZZER and SYS_AUTOSTART haven't been lost
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump"'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param dump /fs/microsd/parameters_backup.bson" || true'
+  //sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "calib_udelay"'
 }
 
 void printTopics() {
@@ -936,10 +948,6 @@ void printTopics() {
 }
 
 void resetBoard() {
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-
   resetParameters()
 
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 0" || true'
@@ -949,29 +957,4 @@ void resetBoard() {
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SDLOG_MODE -1" || true'        // limit cpu usage
   sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "echo > /fs/microsd/.format" || true'
   sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
-
-  // check SD card
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
-  // format
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "dataman stop" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "umount /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mkfatfs -F 32 /dev/mmcsd0" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "top once" || true'
-
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "mount -t vfat /dev/mmcsd0 /fs/microsd" || true'
-  // check SD card
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "df -h" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /fs/microsd" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "ls /proc/fs" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/blocks" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/mount" || true'
-  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "cat /proc/fs/usage" || true'
-
-  sh './Tools/HIL/reboot.py --device `find /dev/serial -name *usb-*`' // reboot to apply
 }

.clusterfuzzlite/Dockerfile

@@ -0,0 +1,7 @@
+FROM gcr.io/oss-fuzz-base/base-builder:v1
+COPY . $SRC/PX4-Autopilot
+RUN apt-get install -y libjpeg8-dev zlib1g-dev
+RUN pip3 install --upgrade pip
+RUN python3 -m pip install -r $SRC/PX4-Autopilot/Tools/setup/requirements.txt
+WORKDIR $SRC/PX4-Autopilot
+COPY ./.clusterfuzzlite/build.sh $SRC/

.clusterfuzzlite/build.sh

@@ -0,0 +1,4 @@
+#!/usr/bin/env bash -eu
+
+PX4_FUZZ=1 make px4_sitl
+cp build/px4_sitl_default/bin/px4 $OUT/px4

.clusterfuzzlite/project.yaml

@@ -0,0 +1 @@
+language: c++

.github/workflows/cflite_batch.yml

@@ -0,0 +1,34 @@
+name: ClusterFuzzLite batch fuzzing
+on:
+  schedule:
+    - cron: '0 6 * * *'  # UTC 6am every day.
+permissions: read-all
+jobs:
+  BatchFuzzing:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        sanitizer:
+        - address
+        - undefined
+        - memory
+    steps:
+    - name: Build Fuzzers (${{ matrix.sanitizer }})
+      id: build
+      uses: google/clusterfuzzlite/actions/build_fuzzers@v1
+      with:
+        sanitizer: ${{ matrix.sanitizer }}
+    - name: Run Fuzzers (${{ matrix.sanitizer }})
+      id: run
+      uses: google/clusterfuzzlite/actions/run_fuzzers@v1
+      with:
+        github-token: ${{ secrets.GITHUB_TOKEN }}
+        fuzz-seconds: 1800 # 30 mins
+        mode: 'batch'
+        sanitizer: ${{ matrix.sanitizer }}
+        # Optional but recommended: For storing certain artifacts from fuzzing.
+        # See later section on "Git repo for storage".
+        # storage-repo: https://${{ secrets.PERSONAL_ACCESS_TOKEN }}@github.com/OWNER/STORAGE-REPO-NAME.git
+        # storage-repo-branch: main   # Optional. Defaults to "main"
+        # storage-repo-branch-coverage: gh-pages  # Optional. Defaults to "gh-pages".

Jenkinsfile

@@ -88,7 +88,7 @@ pipeline {
             docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
             sh 'git fetch --all --tags'
             sh 'make airframe_metadata'
             dir('build/px4_sitl_default/docs') {
@@ -98,7 +98,7 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
             }
           }
         }
@@ -108,7 +108,7 @@ pipeline {
             docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
             sh 'git fetch --all --tags'
             sh 'make parameters_metadata'
             dir('build/px4_sitl_default/docs') {
@@ -118,7 +118,7 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
             }
           }
         }
@@ -128,7 +128,7 @@ pipeline {
             docker { image 'px4io/px4-dev-base-focal:2021-08-18' }
           }
           steps {
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
             sh 'git fetch --all --tags'
             sh 'make module_documentation'
             dir('build/px4_sitl_default/docs') {
@@ -138,7 +138,7 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
             }
           }
         }
@@ -156,7 +156,7 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
             }
           }
         }
@@ -170,7 +170,7 @@ pipeline {
           }
           steps {
             sh 'export'
-            sh 'make distclean'
+            sh 'make distclean; git clean -ff -x -d .'
             sh 'git fetch --all --tags'
             sh 'make uorb_graphs'
             dir('Tools/uorb_graph') {
@@ -180,7 +180,7 @@ pipeline {
           }
           post {
             always {
-              sh 'make distclean'
+              sh 'make distclean; git clean -ff -x -d .'
             }
           }
         }
@@ -261,7 +261,7 @@ pipeline {
           steps {
             sh('export')
             sh('git fetch --all --tags')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
             sh('make px4_sitl_rtps')
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/micrortps_agent.git -b ${BRANCH_NAME}")
@@ -290,7 +290,7 @@ pipeline {
           }
           steps {
             sh('export')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_msgs.git")
               // 'master' branch
@@ -319,7 +319,7 @@ pipeline {
           }
           steps {
             sh('export')
-            sh('make distclean')
+            sh('make distclean; git clean -ff -x -d .')
             withCredentials([usernamePassword(credentialsId: 'px4buildbot_github_personal_token', passwordVariable: 'GIT_PASS', usernameVariable: 'GIT_USER')]) {
               sh("git clone https://${GIT_USER}:${GIT_PASS}@github.com/PX4/px4_ros_com.git -b ${BRANCH_NAME}")
               // deploy uORB RTPS ID map

Makefile

@@ -158,6 +158,11 @@ else
 		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=UndefinedBehaviorSanitizer
 	endif
 
+	# Fuzz Testing
+	ifdef PX4_FUZZ
+		CMAKE_ARGS += -DCMAKE_BUILD_TYPE=FuzzTesting
+	endif
+
 endif
 
 # Pick up specific Python path if set
@@ -482,7 +487,9 @@ shellcheck_all:
 	@make px4_fmu-v5_default shellcheck
 
 validate_module_configs:
-	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f -not -path "$(SRC_DIR)/src/lib/mixer_module/*" -print0 | xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
+	@find "$(SRC_DIR)"/src/modules "$(SRC_DIR)"/src/drivers "$(SRC_DIR)"/src/lib -name *.yaml -type f \
+	-not -path "$(SRC_DIR)/src/lib/mixer_module/*" -not -path "$(SRC_DIR)/src/lib/crypto/libtommath/*" -print0 | \
+	xargs -0 "$(SRC_DIR)"/Tools/validate_yaml.py --schema-file "$(SRC_DIR)"/validation/module_schema.yaml
 
 # Cleanup
 # --------------------------------------------------------------------

ROMFS/px4fmu_common/init.d-posix/airframes/10017_iris_ctrlalloc

@@ -14,19 +14,19 @@ param set-default SYS_CTRL_ALLOC 1
 
 param set-default CA_AIRFRAME 0
 
-param set-default CA_MC_R_COUNT 4
-param set-default CA_MC_R0_PX 0.1515
-param set-default CA_MC_R0_PY 0.245
-param set-default CA_MC_R0_KM 0.05
-param set-default CA_MC_R1_PX -0.1515
-param set-default CA_MC_R1_PY -0.1875
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.1515
-param set-default CA_MC_R2_PY -0.245
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.1515
-param set-default CA_MC_R3_PY 0.1875
-param set-default CA_MC_R3_KM -0.05
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d-posix/airframes/1022_uuv_bluerov2_heavy

@@ -8,6 +8,63 @@
 # disable circuit breaker for airspeed sensor
 param set-default CBRK_AIRSPD_CHK 162128
 
-set PWM_OUT 12345678
-set MIXER_FILE etc/mixers-sitl/vectored6dof_sitl.main.mix
-set MIXER custom
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 7
+
+param set-default CA_ROTOR_COUNT 8
+param set-default CA_R_REV 255
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AY -1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PX 0.5000
+param set-default CA_ROTOR0_PY 0.3000
+param set-default CA_ROTOR0_PZ 0.2000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AY 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PX 0.5000
+param set-default CA_ROTOR1_PY -0.3000
+param set-default CA_ROTOR1_PZ 0.2000
+param set-default CA_ROTOR2_AX 1.0000
+param set-default CA_ROTOR2_AY 1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -0.5000
+param set-default CA_ROTOR2_PY 0.3000
+param set-default CA_ROTOR2_PZ 0.2000
+param set-default CA_ROTOR3_AX 1.0000
+param set-default CA_ROTOR3_AY -1.0000
+param set-default CA_ROTOR3_AZ 0.0000
+param set-default CA_ROTOR3_KM 0.0000
+param set-default CA_ROTOR3_PX -0.5000
+param set-default CA_ROTOR3_PY -0.3000
+param set-default CA_ROTOR3_PZ 0.2000
+param set-default CA_ROTOR4_AZ -1.0000
+param set-default CA_ROTOR4_KM 0.0000
+param set-default CA_ROTOR4_PX 0.5000
+param set-default CA_ROTOR4_PY 0.5000
+param set-default CA_ROTOR5_AZ 1.0000
+param set-default CA_ROTOR5_KM 0.0000
+param set-default CA_ROTOR5_PX 0.5000
+param set-default CA_ROTOR5_PY -0.5000
+param set-default CA_ROTOR6_AZ 1.0000
+param set-default CA_ROTOR6_KM 0.0000
+param set-default CA_ROTOR6_PX -0.5000
+param set-default CA_ROTOR6_PY 0.5000
+param set-default CA_ROTOR7_KM 0.0000
+param set-default CA_ROTOR7_PX -0.5000
+param set-default CA_ROTOR7_PY -0.5000
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 106
+param set-default PWM_MAIN_FUNC7 107
+param set-default PWM_MAIN_FUNC8 108
+
+set MIXER skip
+

ROMFS/px4fmu_common/init.d-posix/airframes/1030_plane

@@ -43,5 +43,32 @@ param set-default NAV_DLL_ACT 2
 
 param set-default RWTO_TKOFF 1
 
+#param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+
 set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
 set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -7,6 +7,39 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 2
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 105
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -7,14 +7,48 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 4
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 1
+param set-default CA_ROTOR0_PY 2
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -1
+param set-default CA_ROTOR1_PY -1
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 1
+param set-default CA_ROTOR2_PY -1
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -1
+param set-default CA_ROTOR3_PY 1
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_SV_CS_COUNT 2
+param set-default CA_SV_CS0_TYPE 5
+param set-default CA_SV_CS0_TRQ_P 0.5
+param set-default CA_SV_CS0_TRQ_Y -0.5
+param set-default CA_SV_CS1_TYPE 6
+param set-default CA_SV_CS1_TRQ_P 0.5
+param set-default CA_SV_CS1_TRQ_Y 0.5
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 0
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_REV 96 # invert both elevons
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_I 0.2
-param set-default FW_PR_P 0.3
+param set-default FW_PR_P 0.2
 param set-default FW_PSP_OFF 2
 param set-default FW_P_LIM_MAX 32
 param set-default FW_P_LIM_MIN -15
-param set-default FW_RR_P 0.3
+param set-default FW_RR_P 0.2
 param set-default FW_THR_CRUISE 0.33
 param set-default FW_THR_MAX 0.6
 param set-default FW_THR_MIN 0.05
@@ -36,6 +70,8 @@ param set-default MPC_XY_VEL_D_ACC 0.1
 param set-default NAV_ACC_RAD 5
 param set-default NAV_LOITER_RAD 80
 
+param set-default VT_FW_DIFTHR_EN 1
+param set-default VT_FW_DIFTHR_SC 0.5
 param set-default VT_F_TRANS_DUR 1.5
 param set-default VT_F_TRANS_THR 0.7
 param set-default VT_TYPE 0

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -7,6 +7,52 @@
 
 . ${R}etc/init.d/rc.vtol_defaults
 
+# param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.1515
+param set-default CA_ROTOR0_PY 0.245
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.1515
+param set-default CA_ROTOR1_PY -0.1875
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.1515
+param set-default CA_ROTOR2_PY -0.245
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.1515
+param set-default CA_ROTOR3_PY 0.1875
+param set-default CA_ROTOR3_KM -0.05
+
+param set-default CA_ROTOR0_TILT 1
+param set-default CA_ROTOR1_TILT 2
+param set-default CA_ROTOR2_TILT 3
+param set-default CA_ROTOR3_TILT 4
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS_COUNT 3
+param set-default CA_SV_TL0_CT 0
+param set-default CA_SV_TL1_CT 0
+param set-default CA_SV_TL2_CT 0
+param set-default CA_SV_TL3_CT 0
+param set-default CA_SV_TL_COUNT 4
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 103
+param set-default PWM_MAIN_FUNC4 104
+param set-default PWM_MAIN_FUNC5 204
+param set-default PWM_MAIN_FUNC6 205
+param set-default PWM_MAIN_FUNC7 206
+param set-default PWM_MAIN_FUNC8 207
+param set-default PWM_MAIN_FUNC9 201
+param set-default PWM_MAIN_FUNC10 202
+param set-default PWM_MAIN_FUNC11 203
+
 param set-default FW_L1_PERIOD 12
 param set-default FW_MAN_P_MAX 30
 param set-default FW_PR_FF 0.2

ROMFS/px4fmu_common/init.d-posix/airframes/1060_rover

@@ -28,6 +28,15 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 5
+
+param set-default CA_R_REV 1
+param set-default PWM_MAIN_FUNC1 201
+param set-default PWM_MAIN_FUNC2 201
+param set-default PWM_MAIN_FUNC6 101
+param set-default PWM_MAIN_FUNC7 101
+
 set MAV_TYPE 10
 
-set MIXER_FILE etc/mixers-sitl/rover_ackermann_sitl.main.mix
+set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1061_r1_rover

@@ -28,6 +28,15 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 6
+
+param set-default CA_R_REV 3
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 101
+param set-default PWM_MAIN_FUNC6 102
+param set-default PWM_MAIN_FUNC7 102
+
 set MAV_TYPE 10
 
-set MIXER_FILE etc/mixers-sitl/rover_diff_sitl.main.mix
+set MIXER_FILE skip

ROMFS/px4fmu_common/init.d-posix/airframes/1070_boat

@@ -28,6 +28,25 @@ param set-default CBRK_AIRSPD_CHK 162128
 param set-default GND_MAX_ANG 0.6
 param set-default GND_WHEEL_BASE 2.0
 
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 9
+
+param set-default CA_ROTOR_COUNT 2
+param set-default CA_ROTOR0_AX 1
+param set-default CA_ROTOR0_AZ 0
+param set-default CA_ROTOR0_KM 0
+param set-default CA_ROTOR0_PX -2
+param set-default CA_ROTOR0_PY -1
+param set-default CA_ROTOR1_AX 1
+param set-default CA_ROTOR1_AZ 0
+param set-default CA_ROTOR1_KM 0
+param set-default CA_ROTOR1_PX -2
+param set-default CA_ROTOR1_PY 1
+param set-default CA_R_REV 3
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+
 set MAV_TYPE 11
 
-set MIXER_FILE etc/mixers-sitl/boat_sitl.main.mix
+set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/2507_cloudship

@@ -11,5 +11,31 @@
 
 . ${R}etc/init.d/rc.airship_defaults
 
-set MIXER cloudship
-set PWM_OUT 1234
+param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 9
+
+param set-default CA_ROTOR_COUNT 3
+param set-default CA_ROTOR0_AX 1.0000
+param set-default CA_ROTOR0_AZ 0.0000
+param set-default CA_ROTOR0_KM 0.0000
+param set-default CA_ROTOR0_PY 2.0000
+param set-default CA_ROTOR1_AX 1.0000
+param set-default CA_ROTOR1_AZ 0.0000
+param set-default CA_ROTOR1_KM 0.0000
+param set-default CA_ROTOR1_PY -2.0000
+param set-default CA_ROTOR2_AY -1.0000
+param set-default CA_ROTOR2_AZ 0.0000
+param set-default CA_ROTOR2_KM 0.0000
+param set-default CA_ROTOR2_PX -10.0000
+
+param set-default CA_SV_CS_COUNT 1
+param set-default CA_SV_CS0_TRQ_P 1.0000
+
+param set-default CA_R_REV 7
+
+param set-default PWM_MAIN_FUNC1 101
+param set-default PWM_MAIN_FUNC2 102
+param set-default PWM_MAIN_FUNC3 201
+param set-default PWM_MAIN_FUNC4 103
+
+set MIXER skip

ROMFS/px4fmu_common/init.d-posix/airframes/6012_typhoon_h480_ctrlalloc

@@ -30,26 +30,26 @@ param set-default MNT_MODE_IN 0
 param set-default MAV_PROTO_VER 2
 
 param set-default CA_AIRFRAME 0
-param set-default CA_MC_R_COUNT 6
+param set-default CA_ROTOR_COUNT 6
 
-param set-default CA_MC_R0_PX 0.0
-param set-default CA_MC_R0_PY 1.0
-param set-default CA_MC_R0_KM -0.05
-param set-default CA_MC_R1_PX 0.0
-param set-default CA_MC_R1_PY -1.0
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.866025
-param set-default CA_MC_R2_PY -0.5
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.866025
-param set-default CA_MC_R3_PY 0.5
-param set-default CA_MC_R3_KM 0.05
-param set-default CA_MC_R4_PX 0.866025
-param set-default CA_MC_R4_PY 0.5
-param set-default CA_MC_R4_KM 0.05
-param set-default CA_MC_R5_PX -0.866025
-param set-default CA_MC_R5_PY -0.5
-param set-default CA_MC_R5_KM -0.05
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 1.0
+param set-default CA_ROTOR0_KM -0.05
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -1.0
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.866025
+param set-default CA_ROTOR2_PY -0.5
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.866025
+param set-default CA_ROTOR3_PY 0.5
+param set-default CA_ROTOR3_KM 0.05
+param set-default CA_ROTOR4_PX 0.866025
+param set-default CA_ROTOR4_PY 0.5
+param set-default CA_ROTOR4_KM 0.05
+param set-default CA_ROTOR5_PX -0.866025
+param set-default CA_ROTOR5_PY -0.5
+param set-default CA_ROTOR5_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d/airframes/1101_rc_plane_sih.hil

@@ -38,3 +38,4 @@ param set SIH_IXZ 0.00046
 param set SIH_KDV 0.2
 
 param set SIH_VEHICLE_TYPE 1 	# sih as fixed wing
+param set RWTO_TKOFF 1  # enable takeoff from runway (as opposed to launched)

ROMFS/px4fmu_common/init.d/airframes/13013_deltaquad

@@ -64,7 +64,6 @@ param set-default FW_BAT_SCALE_EN 1
 param set-default FW_THR_ALT_SCL 2.7
 param set-default FW_T_RLL2THR 20
 
-param set-default LNDMC_ALT_MAX 9999
 param set-default LNDMC_XY_VEL_MAX 1
 param set-default LNDMC_Z_VEL_MAX 0.7
 

ROMFS/px4fmu_common/init.d/airframes/4018_s500_ctrlalloc

@@ -19,19 +19,19 @@ param set-default SYS_CTRL_ALLOC 1
 
 param set-default CA_AIRFRAME 0
 
-param set-default CA_MC_R_COUNT 4
-param set-default CA_MC_R0_PX 0.177
-param set-default CA_MC_R0_PY 0.177
-param set-default CA_MC_R0_KM 0.05
-param set-default CA_MC_R1_PX -0.177
-param set-default CA_MC_R1_PY -0.177
-param set-default CA_MC_R1_KM 0.05
-param set-default CA_MC_R2_PX 0.177
-param set-default CA_MC_R2_PY -0.177
-param set-default CA_MC_R2_KM -0.05
-param set-default CA_MC_R3_PX -0.177
-param set-default CA_MC_R3_PY 0.177
-param set-default CA_MC_R3_KM -0.05
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.177
+param set-default CA_ROTOR0_PY 0.177
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.177
+param set-default CA_ROTOR1_PY -0.177
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.177
+param set-default CA_ROTOR2_PY -0.177
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.177
+param set-default CA_ROTOR3_PY 0.177
+param set-default CA_ROTOR3_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d/airframes/6003_hexa_x_ctrlalloc

@@ -15,31 +15,31 @@
 param set-default SYS_CTRL_ALLOC 1
 
 param set-default CA_AIRFRAME 0
-param set-default CA_MC_R_COUNT 6
+param set-default CA_ROTOR_COUNT 6
 
-param set-default CA_MC_R0_PX 0.0
-param set-default CA_MC_R0_PY 0.275
-param set-default CA_MC_R0_KM -0.05
+param set-default CA_ROTOR0_PX 0.0
+param set-default CA_ROTOR0_PY 0.275
+param set-default CA_ROTOR0_KM -0.05
 
-param set-default CA_MC_R1_PX 0.0
-param set-default CA_MC_R1_PY -0.275
-param set-default CA_MC_R1_KM 0.05
+param set-default CA_ROTOR1_PX 0.0
+param set-default CA_ROTOR1_PY -0.275
+param set-default CA_ROTOR1_KM 0.05
 
-param set-default CA_MC_R2_PX 0.238
-param set-default CA_MC_R2_PY -0.1375
-param set-default CA_MC_R2_KM -0.05
+param set-default CA_ROTOR2_PX 0.238
+param set-default CA_ROTOR2_PY -0.1375
+param set-default CA_ROTOR2_KM -0.05
 
-param set-default CA_MC_R3_PX -0.238
-param set-default CA_MC_R3_PY 0.1375
-param set-default CA_MC_R3_KM 0.05
+param set-default CA_ROTOR3_PX -0.238
+param set-default CA_ROTOR3_PY 0.1375
+param set-default CA_ROTOR3_KM 0.05
 
-param set-default CA_MC_R4_PX 0.238
-param set-default CA_MC_R4_PY 0.1375
-param set-default CA_MC_R4_KM 0.05
+param set-default CA_ROTOR4_PX 0.238
+param set-default CA_ROTOR4_PY 0.1375
+param set-default CA_ROTOR4_KM 0.05
 
-param set-default CA_MC_R5_PX -0.238
-param set-default CA_MC_R5_PY -0.1375
-param set-default CA_MC_R5_KM -0.05
+param set-default CA_ROTOR5_PX -0.238
+param set-default CA_ROTOR5_PY -0.1375
+param set-default CA_ROTOR5_KM -0.05
 
 param set-default PWM_MAIN_FUNC1 101
 param set-default PWM_MAIN_FUNC2 102

ROMFS/px4fmu_common/init.d/rc.airship_apps

@@ -48,6 +48,14 @@ fi
 #                        End Estimator Group Selection                        #
 ###############################################################################
 
+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 #
 # Start Airship Attitude Controller.
 #

ROMFS/px4fmu_common/init.d/rc.fw_apps

@@ -10,6 +10,14 @@
 #
 ekf2 start &
 
+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 #
 # Start attitude controller.
 #

ROMFS/px4fmu_common/init.d/rc.rover_apps

@@ -12,6 +12,13 @@ ekf2 start &
 #attitude_estimator_q start
 #local_position_estimator start
 
+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
 
 #
 # Start attitude controllers.

ROMFS/px4fmu_common/init.d/rc.sensors

@@ -4,19 +4,6 @@
 #
 # NOTE: Script variables are declared/initialized/unset in the rcS script.
 #
-
-if ! ver hwcmp OMNIBUS_F4SD
-then
-	if ! ver hwcmp BITCRAZE_CRAZYFLIE
-	then
-		# Configure all I2C buses to 100 KHz as they
-		# are all external or slow
-		# TODO: move this
-		pwm_out i2c 1 100000
-		pwm_out i2c 2 100000
-	fi
-fi
-
 ###############################################################################
 #                           Begin Optional drivers                            #
 ###############################################################################

ROMFS/px4fmu_common/init.d/rc.uuv_apps

@@ -15,6 +15,14 @@ ekf2 start &
 #                        End Estimator Group Selection                        #
 ###############################################################################
 
+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 #
 # Start UUV Attitude Controller.
 #

ROMFS/px4fmu_common/init.d/rc.vtol_apps

@@ -15,6 +15,14 @@ ekf2 start &
 #                        End Estimator group selection                        #
 ###############################################################################
 
+if param compare SYS_CTRL_ALLOC 1
+then
+	#
+	# Start Control Allocator
+	#
+	control_allocator start
+fi
+
 airspeed_selector start
 
 vtol_att_control start

ROMFS/px4fmu_common/init.d/rcS

@@ -72,28 +72,7 @@ then
 			umount /fs/microsd
 
 		else
-			# very basic I/O test
-			set PX4_INIT_TEST_FILE "/fs/microsd/.px4_init_test_file"
-			date >> $PX4_INIT_TEST_FILE
-
-			if [ $? -eq 0 -a -f $PX4_INIT_TEST_FILE ]
-			then
-				cat $PX4_INIT_TEST_FILE
-				rm $PX4_INIT_TEST_FILE
-
-				if [ $? -eq 0 -a ! -f $PX4_INIT_TEST_FILE ]
-				then
-					set SDCARD_AVAILABLE yes
-				fi
-			fi
-			unset PX4_INIT_TEST_FILE
-
-			if [ $SDCARD_AVAILABLE = no ]
-			then
-				echo "ERROR [init] card I/O failure, formatting"
-				set SDCARD_FORMAT yes
-				umount /fs/microsd
-			fi
+			set SDCARD_AVAILABLE yes
 		fi
 	fi
 
@@ -148,7 +127,7 @@ else
 	#
 	if mft query -q -k MTD -s MTD_PARAMETERS -v /fs/mtd_params
 	then
-		set PARAM_FILE /fs/mtd_params
+		set PARAM_FILE /fs/mtd_params/parameters.bson
 	fi
 
 	#
@@ -179,6 +158,11 @@ else
 		# try importing from backup file
 		if [ -f "/fs/microsd/parameters_backup.bson" ]
 		then
+			echo "[init] importing from parameter backup"
+
+			# dump current backup file contents for comparison
+			param dump /fs/microsd/parameters_backup.bson
+
 			param import /fs/microsd/parameters_backup.bson
 		fi
 	fi

ROMFS/px4fmu_common/mixers-sitl/CMakeLists.txt

@@ -33,15 +33,11 @@
 
 px4_add_romfs_files(
 	autogyro_sitl.main.mix
-	boat_sitl.main.mix
 	delta_wing_sitl.main.mix
 	package_drop.aux.mix
 	plane_sitl.main.mix
 	quad_x_vtol.main.mix
-	rover_ackermann_sitl.main.mix
-	rover_diff_sitl.main.mix
 	standard_vtol_sitl.main.mix
 	tiltrotor_sitl.main.mix
 	uuv_x_sitl.main.mix
-	vectored6dof_sitl.main.mix
 )

ROMFS/px4fmu_common/mixers-sitl/boat_sitl.main.mix

@@ -1,15 +0,0 @@
-Mixer for SITL boat
-=========================================================
-
-Throttle of left propeller of boat on Output 0
----------------------------------------
-M: 2
-S: 0 2    10000   10000      0  -10000  10000
-S: 0 3    10000   10000      0  -10000  10000
-
-
-Throttle of right propeller of boat on Output 1
----------------------------------------
-M: 2
-S: 0 2   -10000  -10000      0  -10000  10000
-S: 0 3    10000   10000      0  -10000  10000

ROMFS/px4fmu_common/mixers-sitl/rover_ackermann_sitl.main.mix

@@ -1,46 +0,0 @@
-Mixer for SITL rover
-=========================================================
-
-Output 0
----------------------------------------
-M: 1
-O:       10000   10000      0 -10000  10000
-S: 0 2   10000   10000      0 -10000  10000
-
-Output 1
----------------------------------------
-M: 1
-O:       10000   10000      0 -10000  10000
-S: 0 2   10000   10000      0 -10000  10000
-
-Output 2
----------------------------------------
-Z:
-
-Output 3
----------------------------------------
-Z:
-
-Output 4
----------------------------------------
-Z:
-
-Output 5
----------------------------------------
-M: 1
-O:      10000  10000      0 -10000  10000
-S: 0 3  10000  10000      0 -10000  10000
-
-Output 6
----------------------------------------
-M: 1
-O:      10000  10000      0 -10000  10000
-S: 0 3  10000  10000      0 -10000  10000
-
-Output 7
----------------------------------------
-Z:
-
-Output 8
----------------------------------------
-Z:

ROMFS/px4fmu_common/mixers-sitl/rover_diff_sitl.main.mix

@@ -1,46 +0,0 @@
-Mixer for SITL rover
-=========================================================
-
-Output 0
----------------------------------------
-M: 2
-S: 0 2  10000   10000      0 -10000  10000
-S: 0 3  10000   10000      0 -10000  10000
-
-Output 1
----------------------------------------
-M: 2
-S: 0 2  10000   10000      0 -10000  10000
-S: 0 3  10000   10000      0 -10000  10000
-
-Output 2
----------------------------------------
-Z:
-
-Output 3
----------------------------------------
-Z:
-
-Output 4
----------------------------------------
-Z:
-
-Output 5
----------------------------------------
-M: 2
-S: 0 2  -10000  -10000      0 -10000  10000
-S: 0 3   10000   10000      0 -10000  10000
-
-Output 6
----------------------------------------
-M: 2
-S: 0 2  -10000  -10000      0 -10000  10000
-S: 0 3   10000   10000      0 -10000  10000
-
-Output 7
----------------------------------------
-Z:
-
-Output 8
----------------------------------------
-Z:

ROMFS/px4fmu_common/mixers-sitl/vectored6dof_sitl.main.mix

@@ -1,40 +0,0 @@
-# Motor 1
-M: 3
-S: 0 2  -4000  -4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  -4000  -4000  0   -4000  +4000
-# Motor 2
-M: 3
-S: 0 2  +4000  +4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  +4000  +4000  0   -4000  +4000
-# Motor 3
-M: 3
-S: 0 2  -4000  -4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  +4000  +4000  0   -4000  +4000
-# Motor 4
-M: 3
-S: 0 2  +4000  +4000  0   -4000  +4000
-S: 0 3  +4000  +4000  0   -4000  +4000
-S: 0 4  -4000  -4000  0   -4000  +4000
-# Motor 5
-M: 3
-S: 0 0  -4000  -4000  0   -4000  +4000
-S: 0 1  +4000  +4000  0   -4000  +4000
-S: 0 5  -4000  -4000  0   -4000  +4000
-# Motor 6
-M: 3
-S: 0 0  -4000  -4000  0   -4000  +4000
-S: 0 1  -4000  -4000  0   -4000  +4000
-S: 0 5  +4000  +4000  0   -4000  +4000
-# Motor 7
-M: 3
-S: 0 0  +4000  +4000  0   -4000  +4000
-S: 0 1  +4000  +4000  0   -4000  +4000
-S: 0 5  +4000  +4000  0   -4000  +4000
-# Motor 8
-M: 3
-S: 0 0  +4000  +4000  0   -4000  +4000
-S: 0 1  -4000  -4000  0   -4000  +4000
-S: 0 5  -4000  -4000  0   -4000  +4000

Tools/HIL/monitor_firmware_upload.py

@@ -7,6 +7,8 @@ from argparse import ArgumentParser
 import re
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile
 
 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -36,8 +38,9 @@ def print_line(line):
     else:
         print('{0}'.format(line), end='')
 
-def monitor_firmware_upload(port, baudrate):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=1, xonxoff=True, rtscts=False, dsrdtr=False)
+
+def monitor_firmware_upload(port_url, baudrate):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)
 
     timeout = 180  # 3 minutes
     timeout_start = time.monotonic()
@@ -49,33 +52,59 @@ def monitor_firmware_upload(port, baudrate):
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
         if len(serial_line) > 0:
-            if "ERROR" in serial_line:
-                return_code = -1
 
             print_line(serial_line)
 
-        if "NuttShell (NSH)" in serial_line:
-            sys.exit(return_code)
-        elif "nsh>" in serial_line:
-            sys.exit(return_code)
+            if "NuttShell (NSH)" in serial_line:
+                sys.exit(return_code)
+            elif "nsh>" in serial_line:
+                sys.exit(return_code)
 
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout")
-            sys.exit(-1)
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout")
+                sys.exit(-1)
+
+            # newline every 10 seconds if still running
+            if (len(serial_line) <= 0) and (time.monotonic() - timeout_newline > 10):
+                timeout_newline = time.monotonic()
+                ser.write("\n".encode("ascii"))
 
-        # newline every 10 seconds if still running
-        if time.monotonic() - timeout_newline > 10:
-            timeout_newline = time.monotonic()
-            ser.write("\n".encode("ascii"))
-            ser.flush()
 
 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
     parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
     args = parser.parse_args()
 
-    monitor_firmware_upload(args.device, args.baudrate)
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    monitor_firmware_upload(port_url, args.baudrate)
 
 if __name__ == "__main__":
    main()

Tools/HIL/nsh_param_set.py

@@ -6,6 +6,9 @@ from subprocess import call, Popen
 from argparse import ArgumentParser
 import re
 import sys
+import datetime
+import serial.tools.list_ports as list_ports
+import tempfile
 
 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -29,33 +32,38 @@ def print_line(line):
     if "FAILED" in line:
         line = line.replace("FAILED", f"{COLOR_RED}FAILED{COLOR_RESET}", 1)
 
-    print(line, end='')
+    if "\n" in line:
+        current_time = datetime.datetime.now()
+        print('[{0}] {1}'.format(current_time.isoformat(timespec='milliseconds'), line), end='')
+    else:
+        print('{0}'.format(line), end='')
 
-def do_param_set_cmd(port, baudrate, param_name, param_value):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=0.1, xonxoff=True, rtscts=False, dsrdtr=False)
+
+def do_param_set_cmd(port_url, baudrate, param_name, param_value):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)
 
     timeout_start = time.monotonic()
     timeout = 30  # 30 seconds
 
+    ser.write("\n\n\n".encode("ascii"))
+
     # wait for nsh prompt
     while True:
-        ser.write("\n".encode("ascii"))
-        ser.flush()
-
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if "nsh>" in serial_line:
-            break
+        if len(serial_line) > 0:
+            if "nsh>" in serial_line:
+                break
         else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for prompt")
+                sys.exit(1)
+
+            ser.write("\n".encode("ascii"))
 
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for prompt")
-            sys.exit(1)
 
     # clear
-    ser.readlines()
+    ser.reset_input_buffer()
 
     # run command
     timeout_start = time.monotonic()
@@ -65,28 +73,32 @@ def do_param_set_cmd(port, baudrate, param_name, param_value):
 
     # write command (param set) and wait for command echo
     print("Running command: \'{0}\'".format(cmd))
-    serial_cmd = '{0}\r\n'.format(cmd)
+    serial_cmd = '{0}\n'.format(cmd)
+
     ser.write(serial_cmd.encode("ascii"))
-    ser.flush()
+
     while True:
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if cmd in serial_line:
-            print_line(serial_line)
-            break
-        else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
+        if len(serial_line) > 0:
+            if cmd in serial_line:
+                break
 
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for command echo")
-            break
+            print_line(serial_line)
+
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for command echo")
+                break
+
+    # clear
+    ser.reset_input_buffer()
 
     # verify param value
     cmd = "param show " + param_name
-    serial_cmd = '{0}\r\n'.format(cmd)
+    print("Running command: \'{0}\'".format(cmd))
+    serial_cmd = '{0}\n'.format(cmd)
     ser.write(serial_cmd.encode("ascii"))
-    ser.flush()
 
     param_show_response = param_name + " ["
 
@@ -96,44 +108,64 @@ def do_param_set_cmd(port, baudrate, param_name, param_value):
     while True:
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if param_show_response in serial_line:
+        if len(serial_line) > 0:
             print_line(serial_line)
-            current_param_value = serial_line.split(":")[-1].strip()
 
-            if (current_param_value == param_value):
-                sys.exit(0)
+            if param_show_response in serial_line:
+                current_param_value = serial_line.split(":")[-1].strip()
+
+                if (current_param_value == param_value):
+                    sys.exit(0)
+                else:
+                    sys.exit(1)
             else:
-                sys.exit(1)
+                if time.monotonic() > timeout_start + timeout:
+                    if "nsh>" in serial_line:
+                        sys.exit(1) # error, command didn't complete successfully
+                    elif "NuttShell (NSH)" in serial_line:
+                        sys.exit(1) # error, command didn't complete successfully
         else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
-
             if time.monotonic() > timeout_start + timeout:
-                if "nsh>" in serial_line:
-                    sys.exit(1) # error, command didn't complete successfully
-                elif "NuttShell (NSH)" in serial_line:
-                    sys.exit(1) # error, command didn't complete successfully
+                print("Error, timeout")
+                sys.exit(-1)
 
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout")
-            sys.exit(-1)
-
-        if len(serial_line) <= 0:
-            ser.write("\r\n".encode("ascii"))
-            ser.flush()
-            time.sleep(0.2)
-
-    ser.close()
 
 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
     parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
     parser.add_argument("--name", "-p", dest="param_name", help="Parameter name")
     parser.add_argument("--value", "-v", dest="param_value", help="Parameter value")
     args = parser.parse_args()
 
-    do_param_set_cmd(args.device, args.baudrate, args.param_name, args.param_value)
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    do_param_set_cmd(port_url, args.baudrate, args.param_name, args.param_value)
 
 if __name__ == "__main__":
    main()

Tools/HIL/reboot.py

@@ -7,6 +7,8 @@ from argparse import ArgumentParser
 import re
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile
 
 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -36,15 +38,15 @@ def print_line(line):
     else:
         print('{0}'.format(line), end='')
 
-def reboot(port, baudrate):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=1, xonxoff=True, rtscts=False, dsrdtr=False)
 
-    # clear
-    ser.readlines()
+def reboot(port_url, baudrate):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)
 
     time_start = time.monotonic()
-    ser.write("\nreboot\n".encode("ascii"))
-    ser.flush()
+
+    ser.write("\n\n\n".encode("ascii"))
+
+    ser.write("reboot\n".encode("ascii"))
     time_reboot_cmd = time_start
 
     timeout_reboot_cmd = 90
@@ -53,31 +55,53 @@ def reboot(port, baudrate):
     return_code = 0
 
     while True:
-        if time.monotonic() > time_reboot_cmd + timeout_reboot_cmd:
-            time_reboot_cmd = time.monotonic()
-            print("sending reboot cmd again")
-            ser.write("reboot\n".encode("ascii"))
-            ser.flush()
-            time.sleep(0.2)
-
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
         if len(serial_line) > 0:
+            print_line(serial_line)
+
             if "ERROR" in serial_line:
                 return_code = -1
 
-            print_line(serial_line)
+            if "NuttShell (NSH)" in serial_line:
+                sys.exit(return_code)
 
-        if "NuttShell (NSH)" in serial_line:
-            sys.exit(return_code)
+        else:
+            if time.monotonic() > time_start + timeout:
+                print("Error, timeout")
+                sys.exit(-1)
+
+            if time.monotonic() > time_reboot_cmd + timeout_reboot_cmd:
+                time_reboot_cmd = time.monotonic()
+                print("sending reboot cmd again")
+                ser.write("reboot\n".encode("ascii"))
 
-        if time.monotonic() > time_start + timeout:
-            print("Error, timeout")
-            sys.exit(-1)
 
 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
     parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
     parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
     args = parser.parse_args()
 

Tools/HIL/run_nsh_cmd.py

@@ -7,6 +7,8 @@ from argparse import ArgumentParser
 import re
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile
 
 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -37,59 +39,59 @@ def print_line(line):
         print('{0}'.format(line), end='')
 
 
-def do_nsh_cmd(port, baudrate, cmd):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=0.2, xonxoff=True, rtscts=False, dsrdtr=False)
+def do_nsh_cmd(port_url, baudrate, cmd):
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=1, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)
 
     timeout_start = time.monotonic()
     timeout = 30  # 30 seconds
 
+    ser.write("\n\n\n".encode("ascii"))
+
     # wait for nsh prompt
     while True:
-        ser.write("\n".encode("ascii"))
-        ser.flush()
-
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if "nsh>" in serial_line:
-            break
+        if len(serial_line) > 0:
+            if "nsh>" in serial_line:
+                break
         else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for prompt")
+                sys.exit(1)
+
+            ser.write("\n".encode("ascii"))
 
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for prompt")
-            sys.exit(1)
 
     # clear
-    ser.readlines()
+    ser.reset_input_buffer()
 
     # run command
     timeout_start = time.monotonic()
-    timeout = 1  # 1 second
+    timeout = 5  # 5 seconds
 
     success_cmd = "cmd succeeded!"
 
     # wait for command echo
     print("Running command: \'{0}\'".format(cmd))
-    serial_cmd = '{0}; echo "{1}"; echo "{2}";\r\n'.format(cmd, success_cmd, success_cmd)
+    serial_cmd = '{0}; echo "{1}"; echo "{2}";\n'.format(cmd, success_cmd, success_cmd)
     ser.write(serial_cmd.encode("ascii"))
-    ser.flush()
+
     while True:
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if cmd in serial_line:
-            break
-        elif serial_line.startswith(success_cmd) and len(serial_line) <= len(success_cmd) + 2:
-            print_line(serial_line)
-            # we missed the echo, but command ran and succeeded
-            sys.exit(0)
-        else:
-            if len(serial_line) > 0:
+        if len(serial_line) > 0:
+            if cmd in serial_line:
+                break
+            elif serial_line.startswith(success_cmd) and len(serial_line) <= len(success_cmd) + 2:
                 print_line(serial_line)
-
-        if (len(serial_line) <= 0) and (time.monotonic() > timeout_start + timeout):
-            print("Error, timeout waiting for command echo")
-            break
+                # we missed the echo, but command ran and succeeded
+                sys.exit(0)
+            else:
+                print_line(serial_line)
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for command echo")
+                break
 
 
     timeout_start = time.monotonic()
@@ -100,40 +102,60 @@ def do_nsh_cmd(port, baudrate, cmd):
     while True:
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if success_cmd in serial_line:
-            sys.exit(return_code)
-            break
-        else:
-            if len(serial_line) > 0:
+        if len(serial_line) > 0:
+            if success_cmd in serial_line:
+                sys.exit(return_code)
+            else:
                 if "ERROR " in serial_line:
                     return_code = -1
 
                 print_line(serial_line)
 
-            if "nsh>" in serial_line:
-                sys.exit(1) # error, command didn't complete successfully
-            elif "NuttShell (NSH)" in serial_line:
-                sys.exit(1) # error, command didn't complete successfully
+                if "nsh>" in serial_line:
+                    sys.exit(1) # error, command didn't complete successfully
+                elif "NuttShell (NSH)" in serial_line:
+                    sys.exit(1) # error, command didn't complete successfully
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout")
+                sys.exit(-1)
 
-        if (len(serial_line) <= 0) and (time.monotonic() > timeout_start + timeout):
-            print("Error, timeout")
-            sys.exit(-1)
-
-        if len(serial_line) <= 0:
-            ser.write("\r\n".encode("ascii"))
-            ser.flush()
-            time.sleep(0.2)
-
-    ser.close()
 
 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
     parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
     parser.add_argument("--cmd", "-c", dest="cmd", help="Command to run")
     args = parser.parse_args()
 
-    do_nsh_cmd(args.device, args.baudrate, args.cmd)
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    do_nsh_cmd(port_url, args.baudrate, args.cmd)
 
 if __name__ == "__main__":
    main()

Tools/HIL/run_tests.py

@@ -9,6 +9,9 @@ import unittest
 import os
 import sys
 import datetime
+import serial.tools.list_ports as list_ports
+import tempfile
+import warnings
 
 COLOR_RED    = "\x1b[31m"
 COLOR_GREEN  = "\x1b[32m"
@@ -38,33 +41,36 @@ def print_line(line):
     else:
         print('{0}'.format(line), end='')
 
-def do_test(port, baudrate, test_name):
-    ser = serial.Serial(port, baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=0.2, xonxoff=True, rtscts=False, dsrdtr=False)
+
+def do_test(port_url, baudrate, test_name):
+
+    # ignore pyserial spy:// resource warnings
+    warnings.filterwarnings(action="ignore", message="unclosed", category=ResourceWarning)
+
+    ser = serial.serial_for_url(url=port_url, baudrate=baudrate, bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3, xonxoff=False, rtscts=False, dsrdtr=False, inter_byte_timeout=1)
 
     timeout_start = time.monotonic()
     timeout = 30  # 30 seconds
 
+    ser.write("\n\n\n".encode("ascii"))
+
     # wait for nsh prompt
     while True:
-        ser.write("\n".encode("ascii"))
-        ser.flush()
-
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if "nsh>" in serial_line:
-            break
+        if len(serial_line) > 0:
+            if "nsh>" in serial_line:
+                break
         else:
-            if len(serial_line) > 0:
-                print(serial_line, end='')
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for prompt")
+                return False
+
+            ser.write("\n".encode("ascii"))
 
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for prompt")
-            return False
 
     # clear
-    ser.readlines()
-
-    success = False
+    ser.reset_input_buffer()
 
     # run test cmd
     print('\n|======================================================================')
@@ -79,20 +85,17 @@ def do_test(port, baudrate, test_name):
     print("Running command: \'{0}\'".format(cmd))
     serial_cmd = '{0}\n'.format(cmd)
     ser.write(serial_cmd.encode("ascii"))
-    ser.flush()
+
     while True:
         serial_line = ser.readline().decode("ascii", errors='ignore')
 
-        if cmd in serial_line:
-            break
+        if len(serial_line) > 0:
+            if cmd in serial_line:
+                break
         else:
-            if len(serial_line) > 0:
-                print_line(serial_line)
-
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout waiting for command echo")
-            break
-
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout waiting for command echo")
+                break
 
     # print results, wait for final result (PASSED or FAILED)
     timeout = 300  # 5 minutes
@@ -105,27 +108,26 @@ def do_test(port, baudrate, test_name):
         if len(serial_line) > 0:
             print_line(serial_line)
 
-        if test_name + " PASSED" in serial_line:
-            success = True
-            break
-        elif test_name + " FAILED" in serial_line:
-            success = False
-            break
+            if test_name + " PASSED" in serial_line:
+                ser.close()
+                return True
+            elif test_name + " FAILED" in serial_line:
+                ser.close()
+                return False
+        else:
+            if time.monotonic() > timeout_start + timeout:
+                print("Error, timeout")
+                print(test_name + f" {COLOR_RED}FAILED{COLOR_RESET}")
+                ser.close()
+                return False
 
-        if time.monotonic() > timeout_start + timeout:
-            print("Error, timeout")
-            print(test_name + f" {COLOR_RED}FAILED{COLOR_RESET}")
-            success = False
-            break
-
-        # newline every 10 seconds if still running
-        if (len(serial_line) <= 0) and (time.monotonic() - timeout_newline > 10):
-            ser.write("\n".encode("ascii"))
-            timeout_newline = time.monotonic()
+            # newline every 30 seconds if still running
+            if time.monotonic() - timeout_newline > 30:
+                ser.write("\n".encode("ascii"))
+                timeout_newline = time.monotonic()
 
     ser.close()
-
-    return success
+    return False
 
 class TestHardwareMethods(unittest.TestCase):
     TEST_DEVICE = 0
@@ -207,12 +209,39 @@ class TestHardwareMethods(unittest.TestCase):
         self.assertTrue(do_test(self.TEST_DEVICE, self.TEST_BAUDRATE, "versioning"))
 
 def main():
+
+    default_device = None
+    device_required = True
+
+    # select USB UART as default if there's only 1
+    ports = list(serial.tools.list_ports.grep('USB UART'))
+
+    if (len(ports) == 1):
+        default_device = ports[0].device
+        device_required = False
+
+        print("Default USB UART port: {0}".format(ports[0].name))
+        print(" device: {0}".format(ports[0].device))
+        print(" description: \"{0}\" ".format(ports[0].description))
+        print(" hwid: {0}".format(ports[0].hwid))
+        #print(" vid: {0}, pid: {1}".format(ports[0].vid, ports[0].pid))
+        #print(" serial_number: {0}".format(ports[0].serial_number))
+        #print(" location: {0}".format(ports[0].location))
+        print(" manufacturer: {0}".format(ports[0].manufacturer))
+        #print(" product: {0}".format(ports[0].product))
+        #print(" interface: {0}".format(ports[0].interface))
+
     parser = ArgumentParser(description=__doc__)
-    parser.add_argument('--device', "-d", nargs='?', default=None, help='', required=True)
-    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="Mavlink port baud rate (default=57600)", default=57600)
+    parser.add_argument('--device', "-d", nargs='?', default=default_device, help='', required=device_required)
+    parser.add_argument("--baudrate", "-b", dest="baudrate", type=int, help="serial port baud rate (default=57600)", default=57600)
     args = parser.parse_args()
 
-    TestHardwareMethods.TEST_DEVICE = args.device
+    tmp_file = "{0}/pyserial_spy_file.txt".format(tempfile.gettempdir())
+    port_url = "spy://{0}?file={1}".format(args.device, tmp_file)
+
+    print("pyserial url: {0}".format(port_url))
+
+    TestHardwareMethods.TEST_DEVICE = port_url
     TestHardwareMethods.TEST_BAUDRATE = args.baudrate
 
     unittest.main(__name__, failfast=True, verbosity=0, argv=['main'])

Tools/HIL/test_airframes.sh

@@ -21,21 +21,42 @@ echo "airframes: ${ALL_AIRFRAMES}"
 for airframe in $ALL_AIRFRAMES
 do
 	echo
-	echo "##########################################################################################"
+	echo
+	echo
+	echo "########################################################################################################################"
 	echo " Airframe: $airframe"
-	echo "##########################################################################################"
+	echo "########################################################################################################################"
 	echo
 
 	${DIR}/nsh_param_set.py --device ${SERIAL_DEVICE} --name SYS_AUTOSTART  --value $airframe
 	${DIR}/nsh_param_set.py --device ${SERIAL_DEVICE} --name CBRK_BUZZER    --value 782097
+
+	# enable all mavlink instances
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_0_CONFIG 101' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_1_CONFIG 102' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_2_CONFIG 103' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set MAV_3_CONFIG 104' || true
+
+	# enable all GPS
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set GPS_1_CONFIG 201' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param set GPS_1_CONFIG 202' || true
+
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param reset SYS_HITL'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param status'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param save'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump'
 
 	${DIR}/reboot.py --device ${SERIAL_DEVICE}
 
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/mtd_params/parameters.bson' || true
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'param dump /fs/microsd/parameters_backup.bson' || true
+
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'ps'
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'work_queue status'
 
 	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'pwm info'
 
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'mavlink stop-all'
+	${DIR}/run_nsh_cmd.py --device ${SERIAL_DEVICE} --cmd 'gps stop'
+
 done

Tools/docker_run.sh

@@ -19,7 +19,7 @@ if [ -z ${PX4_DOCKER_REPO+x} ]; then
 		PX4_DOCKER_REPO="px4io/px4-dev-clang:2021-02-04"
 	elif [[ $@ =~ .*tests* ]]; then
 		# run all tests with simulation
-		PX4_DOCKER_REPO="px4io/px4-dev-simulation-bionic:2021-02-04"
+		PX4_DOCKER_REPO="px4io/px4-dev-simulation-bionic:2021-12-11"
 	fi
 else
 	echo "PX4_DOCKER_REPO is set to '$PX4_DOCKER_REPO'";

Tools/module_config/generate_actuators_metadata.py

@@ -130,7 +130,8 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
         return None
 
 
-    output_groups = yaml_config['actuator_output']['output_groups']
+    actuator_output_yaml = yaml_config['actuator_output']
+    output_groups = actuator_output_yaml['output_groups']
     module_name = process_module_name(yaml_config['module_name'])
     group_idx = 0
 
@@ -139,8 +140,9 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
     actuator_output = {
             'label': module_name
         }
-    if 'show_subgroups_if' in yaml_config['actuator_output']:
-        actuator_output['show-subgroups-if'] = yaml_config['actuator_output']['show_subgroups_if']
+    if 'show_subgroups_if' in actuator_output_yaml:
+        actuator_output['show-subgroups-if'] = actuator_output_yaml['show_subgroups_if']
+    add_reverse_range_param = actuator_output_yaml.get('add_reverse_range_param', False)
 
     # config parameters
     def get_config_params(param_list):
@@ -159,7 +161,7 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
             parameters.append(param)
         return parameters
 
-    parameters = get_config_params(yaml_config['actuator_output'].get('config_parameters', []))
+    parameters = get_config_params(actuator_output_yaml.get('config_parameters', []))
     if len(parameters) > 0:
         actuator_output['parameters'] = parameters
 
@@ -254,6 +256,16 @@ def get_actuator_output(yaml_config, output_functions, timer_config_file, verbos
                 if show_if: param['show-if'] = show_if
                 per_channel_params.append(param)
 
+
+        if add_reverse_range_param:
+            param = {
+                    'label': 'Rev Range\n(for Servos)',
+                    'name': param_prefix+'_REV',
+                    'index-offset': -1,
+                    'show-as': 'bitset',
+                }
+            per_channel_params.append(param)
+
         # TODO: support non-standard per-channel parameters
 
         subgroup['per-channel-parameters'] = per_channel_params
@@ -346,33 +358,39 @@ def get_mixers(yaml_config, output_functions, verbose):
 
             if 'count' in actuator_conf: # possibly dynamic size
                 actuator['count'] = actuator_conf['count']
-                per_item_params = actuator_conf['per_item_parameters']
+                per_item_params = actuator_conf.get('per_item_parameters', {})
                 params = []
                 if 'standard' in per_item_params:
                     standard_params = per_item_params['standard']
+                    index_offset = standard_params.get('index_offset', 0)
                     if 'position' in standard_params:
                         params.extend([
                         {
                             'label': 'Position X',
                             'function': 'posx',
                             'name': standard_params['position'][0],
+                            'index-offset': index_offset,
                         },
                         {
                             'label': 'Position Y',
                             'function': 'posy',
                             'name': standard_params['position'][1],
+                            'index-offset': index_offset,
                         },
                         {
                             'label': 'Position Z',
                             'function': 'posz',
                             'name': standard_params['position'][2],
                             'advanced': True,
+                            'index-offset': index_offset,
                         },
                         ])
                 if 'extra' in per_item_params:
                     for extra_param in per_item_params['extra']:
                         params.append({k.replace('_','-'): v for k, v in extra_param.items()})
                 actuator['per-item-parameters'] = params
+                if 'item_label_prefix' in actuator_conf:
+                    actuator['item-label-prefix'] = actuator_conf['item_label_prefix']
             else: # fixed size
                 labels = []
                 pos_x = []
@@ -417,10 +435,18 @@ def get_mixers(yaml_config, output_functions, verbose):
 
     if verbose:
         print('Mixer configs: {}'.format(config))
+
+    rules = []
+    for rule in yaml_config['mixer'].get('rules', []):
+        rules.append({k.replace('_','-'): v for k, v in rule.items()})
+
+    if verbose:
+        print('Mixer rules: {}'.format(rules))
     
     mixers = {
             'actuator-types': actuator_types,
             'config': config,
+            'rules': rules,
         }
     return mixers
 

Tools/module_config/generate_params.py

@@ -110,6 +110,13 @@ def parse_yaml_parameters_config(yaml_config, ethernet_supported):
                     param_type = 'INT32'
                     for key in param['values']:
                         tags += '\n * @value {:} {:}'.format(key, param['values'][key])
+                elif param['type'] == 'bitmask':
+                    param_type = 'INT32'
+                    for key in param['bit']:
+                        tags += '\n * @bit {:} {:}'.format(key, param['bit'][key])
+                    max_val = max(key for key in param['bit'])
+                    tags += '\n * @min 0'
+                    tags += '\n * @max {:}'.format((1<<(max_val+1)) - 1)
                 elif param['type'] == 'boolean':
                     param_type = 'INT32'
                     tags += '\n * @boolean'
@@ -120,7 +127,7 @@ def parse_yaml_parameters_config(yaml_config, ethernet_supported):
                 else:
                     raise Exception("unknown param type {:}".format(param['type']))
 
-                for tag in ['decimal', 'increment', 'category', 'volatile', 'bit',
+                for tag in ['decimal', 'increment', 'category', 'volatile',
                             'min', 'max', 'unit', 'reboot_required']:
                     if tag in param:
                         tags += '\n * @{:} {:}'.format(tag, param[tag])
@@ -171,6 +178,9 @@ def get_actuator_output_params(yaml_config, output_functions,
     all_params = {}
     group_idx = 0
 
+    add_reverse_range_param = yaml_config['actuator_output'].get('add_reverse_range_param', False)
+    all_param_prefixes = {}
+
     def add_local_param(param_name, param_def):
         nonlocal all_params
         # add as a list, as there can be multiple entries with the same param_name
@@ -252,6 +262,11 @@ def get_actuator_output_params(yaml_config, output_functions,
                     for i in range(count):
                         output_function_values[start+i] = function_name_label+' '+str(i+1)
 
+        if param_prefix not in all_param_prefixes:
+            all_param_prefixes[param_prefix] = []
+        all_param_prefixes[param_prefix].append((instance_start,
+            instance_start_label, num_channels, channel_label))
+
         # function param
         param = {
             'description': {
@@ -331,6 +346,30 @@ When set to -1 (default), the value depends on the function (see {:}).
                     }
                 add_local_param(param_prefix+'_'+param_suffix+'${i}', param)
 
+    if add_reverse_range_param:
+        for param_prefix in all_param_prefixes:
+            groups = all_param_prefixes[param_prefix]
+            # collect the bits
+            channel_bits = {}
+            for instance_start, instance_start_label, num_instances, label in groups:
+                for instance in range(instance_start, instance_start+num_instances):
+                    instance_label = instance - instance_start + instance_start_label
+                    channel_bits[instance-1] = label + ' ' + str(instance_label)
+
+            param = {
+                'description': {
+                    'short': 'Reverse Output Range for '+module_name,
+                    'long':
+'''Allows to reverse the output range for each channel.
+Note: this is only useful for servos.
+'''.format(channel_label),
+                    },
+                'type': 'bitmask',
+                'default': 0,
+                'bit': channel_bits
+                }
+            add_local_param(param_prefix+'_REV', param)
+
     if verbose: print('adding actuator params: {:}'.format(all_params))
     return all_params
 

Tools/px4airframes/markdownout.py

@@ -72,38 +72,27 @@ div.frame_variant td, div.frame_variant th {
 
             # check if all outputs are equal for the group: if so, show them
             # only once
-            outputs_prev = ['', ''] # split into MAINx and others (AUXx)
-            outputs_match = [True, True]
+            all_outputs = {}
+            num_configs = len(group.GetParams())
             for param in group.GetParams():
                 if not self.IsExcluded(param, board):
-                    outputs_current = ['', '']
                     for output_name in param.GetOutputCodes():
                         value = param.GetOutputValue(output_name)
-                        if output_name.lower().startswith('main'):
-                            idx = 0
-                        else:
-                            idx = 1
-                        outputs_current[idx] += '<li><b>%s</b>: %s</li>' % (output_name, value)
-                    for i in range(2):
-                        if len(outputs_current[i]) != 0:
-                            if outputs_prev[i] == '':
-                                outputs_prev[i] = outputs_current[i]
-                            elif outputs_current[i] != outputs_prev[i]:
-                                outputs_match[i] = False
+                        key_value_pair = (output_name, value)
+                        if key_value_pair not in all_outputs:
+                            all_outputs[key_value_pair] = 0
+                        all_outputs[key_value_pair] += 1
+            has_common_outputs = any(all_outputs[k] == num_configs for k in all_outputs)
 
-            for i in range(2):
-                if len(outputs_prev[i]) == 0:
-                    outputs_match[i] = False
-                if not outputs_match[i]:
-                    outputs_prev[i] = ''
-
-            if outputs_match[0] or outputs_match[1]:
+            if has_common_outputs:
+                outputs_common = ''.join(['<li><b>{:}</b>: {:}</li>'.format(k[0], k[1]) \
+                    for k in all_outputs if all_outputs[k] == num_configs])
                 result += '<table>\n'
                 result += ' <thead>\n'
                 result += '   <tr><th>Common Outputs</th></tr>\n'
                 result += ' </thead>\n'
                 result += ' <tbody>\n'
-                result += '<tr>\n <td><ul>%s%s</ul></td>\n</tr>\n' % (outputs_prev[0], outputs_prev[1])
+                result += '<tr>\n <td><ul>%s</ul></td>\n</tr>\n' % (outputs_common)
                 result += '</tbody></table>\n'
 
             result += '</div>\n\n'
@@ -138,11 +127,8 @@ div.frame_variant td, div.frame_variant th {
                     for output_name in param.GetOutputCodes():
                         value = param.GetOutputValue(output_name)
                         valstrs = value.split(";")
-                        if output_name.lower().startswith('main'):
-                            idx = 0
-                        else:
-                            idx = 1
-                        if not outputs_match[idx]:
+                        key_value_pair = (output_name, value)
+                        if all_outputs[key_value_pair] < num_configs:
                             outputs += '<li><b>%s</b>: %s</li>' % (output_name, value)
                             has_outputs = True
 

boards/airmind/mindpx-v2/nuttx-config/nsh/defconfig

@@ -67,6 +67,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -126,7 +127,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y

boards/ark/can-flow/nuttx-config/nsh/defconfig

@@ -49,6 +49,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -103,7 +104,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0

boards/ark/can-gps/nuttx-config/nsh/defconfig

@@ -49,6 +49,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -105,7 +106,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0

boards/ark/can-rtk-gps/nuttx-config/nsh/defconfig

@@ -49,6 +49,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -105,7 +106,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0

boards/atl/mantis-edu/nuttx-config/nsh/defconfig

@@ -72,6 +72,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -124,6 +125,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -133,7 +136,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y

boards/av/x-v1/default.px4board

@@ -39,6 +39,7 @@ CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
@@ -62,7 +63,6 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
@@ -73,8 +73,8 @@ CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_VMOUNT=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_ESC_CALIB=y

boards/av/x-v1/nuttx-config/nsh/defconfig

@@ -77,6 +77,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -146,6 +147,8 @@ CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -155,7 +158,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y

boards/bitcraze/crazyflie/default.px4board

@@ -15,9 +15,7 @@ CONFIG_MODULES_COMMANDER=y
 CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
-CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_GYRO_FFT=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LOAD_MON=y
 CONFIG_MODULES_LOGGER=y
@@ -25,6 +23,7 @@ CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
 CONFIG_MODULES_MAVLINK=y
 CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
@@ -35,8 +34,6 @@ CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
@@ -48,6 +45,5 @@ CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
 CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
 CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/bitcraze/crazyflie/nuttx-config/nsh/defconfig

@@ -67,6 +67,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -123,7 +124,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_NNESTPRIO=8

boards/bitcraze/crazyflie/src/mtd.cpp

@@ -42,18 +42,12 @@ static const px4_mft_device_t i2c1 = {             // 24AA64FT on Base  8K 32 X
 
 static const px4_mtd_entry_t fmu_eeprom = {
 	.device = &i2c1,
-	.npart = 2,
+	.npart = 1,
 	.partd = {
 		{
 			.type = MTD_PARAMETERS,
 			.path = "/fs/mtd_params",
-			.nblocks = 128
-		},
-		{
-			.type = MTD_WAYPOINTS,
-			.path = "/fs/mtd_waypoints",
-			.nblocks = 128
-
+			.nblocks = 256
 		}
 	},
 };

boards/bitcraze/crazyflie21/default.px4board

@@ -19,7 +19,6 @@ CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
 CONFIG_MODULES_LOAD_MON=y
-CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=y
 CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
 CONFIG_MODULES_MANUAL_CONTROL=y
@@ -34,21 +33,17 @@ CONFIG_MODULES_SENSORS=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_MIXER=y
-CONFIG_SYSTEMCMDS_MOTOR_RAMP=y
-CONFIG_SYSTEMCMDS_MOTOR_TEST=y
 CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y
 CONFIG_SYSTEMCMDS_PWM=y
 CONFIG_SYSTEMCMDS_REBOOT=y
-CONFIG_SYSTEMCMDS_REFLECT=y
 CONFIG_SYSTEMCMDS_SD_BENCH=y
 CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
 CONFIG_SYSTEMCMDS_TOP=y
 CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
 CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
 CONFIG_SYSTEMCMDS_UORB=y
-CONFIG_SYSTEMCMDS_USB_CONNECTED=y
 CONFIG_SYSTEMCMDS_VER=y
 CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/bitcraze/crazyflie21/nuttx-config/nsh/defconfig

@@ -122,7 +122,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_NNESTPRIO=8

boards/cuav/can-gps-v1/nuttx-config/nsh/defconfig

@@ -50,6 +50,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -106,7 +107,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0

boards/cuav/nora/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -135,7 +136,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/cuav/x7pro/init/rc.board_sensors

@@ -5,7 +5,7 @@
 board_adc start
 
 # SPI1
-if ! icm20689 -s -b 1 -R 2 start
+if ! icm20689 -s -b 1 -R 2 -q start
 then
 	adis16470 -s -b 1 -R 2 start
 fi

boards/cuav/x7pro/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -134,7 +135,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/cubepilot/cubeorange/nuttx-config/nsh/defconfig

@@ -72,6 +72,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -136,7 +137,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/cubepilot/cubeorange/nuttx-config/test/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -134,7 +135,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/cubepilot/cubeorange/test.px4board

@@ -3,6 +3,7 @@ CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=n
 CONFIG_DRIVERS_IRLOCK=n
 CONFIG_DRIVERS_PCA9685=n
 CONFIG_DRIVERS_PCA9685_PWM_OUT=n
+CONFIG_DRIVERS_ROBOCLAW=n
 CONFIG_DRIVERS_RPM=n
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
 CONFIG_MODULES_LOCAL_POSITION_ESTIMATOR=n

boards/cubepilot/cubeyellow/nuttx-config/nsh/defconfig

@@ -73,6 +73,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -125,6 +126,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -134,7 +137,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y

boards/freefly/can-rtk-gps/nuttx-config/nsh/defconfig

@@ -61,6 +61,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -109,6 +110,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -118,7 +121,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0

boards/holybro/can-gps-v1/nuttx-config/nsh/defconfig

@@ -50,6 +50,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -106,7 +107,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SEM_NNESTPRIO=8
 CONFIG_SEM_PREALLOCHOLDERS=0

boards/holybro/durandal-v1/nuttx-config/nsh/defconfig

@@ -72,6 +72,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -125,6 +126,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -134,7 +137,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/holybro/kakutef7/default.px4board

@@ -9,10 +9,8 @@ CONFIG_BOARD_SERIAL_RC="/dev/ttyS4"
 CONFIG_DRIVERS_ADC_BOARD_ADC=y
 CONFIG_DRIVERS_BAROMETER_BMP280=y
 CONFIG_DRIVERS_DSHOT=y
-CONFIG_DRIVERS_GPS=n
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20689=y
 CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
-CONFIG_DRIVERS_MAGNETOMETER_ISENTEK_IST8310=y
 CONFIG_DRIVERS_OSD=y
 CONFIG_DRIVERS_PWM_OUT=y
 CONFIG_DRIVERS_RC_INPUT=y
@@ -21,10 +19,10 @@ CONFIG_DRIVERS_TONE_ALARM=y
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EVENTS=y
 CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
-CONFIG_MODULES_GYRO_CALIBRATION=y
 CONFIG_MODULES_LAND_DETECTOR=y
 CONFIG_MODULES_LOGGER=y
 CONFIG_MODULES_MANUAL_CONTROL=y
@@ -33,11 +31,9 @@ CONFIG_MODULES_MC_ATT_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
-CONFIG_SYSTEMCMDS_DMESG=n
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_MIXER=y
 CONFIG_SYSTEMCMDS_PARAM=y

boards/holybro/kakutef7/nuttx-config/nsh/defconfig

@@ -136,7 +136,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_NNESTPRIO=8

boards/holybro/pix32v5/nuttx-config/nsh/defconfig

@@ -72,6 +72,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -124,6 +125,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -133,7 +136,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y

boards/matek/h743-slim/default.px4board

@@ -12,8 +12,8 @@ CONFIG_DRIVERS_CAMERA_TRIGGER=y
 CONFIG_COMMON_DISTANCE_SENSOR=y
 CONFIG_DRIVERS_DSHOT=y
 CONFIG_DRIVERS_GPS=y
-CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
+CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
@@ -28,6 +28,7 @@ CONFIG_DRIVERS_UAVCAN=y
 CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_EVENTS=y
@@ -47,14 +48,13 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_SENSORS=y
 CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
 CONFIG_MODULES_VMOUNT=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_ESC_CALIB=y
@@ -62,10 +62,8 @@ CONFIG_SYSTEMCMDS_GPIO=y
 CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
 CONFIG_SYSTEMCMDS_I2CDETECT=y
 CONFIG_SYSTEMCMDS_LED_CONTROL=y
-CONFIG_SYSTEMCMDS_MFT=y
 CONFIG_SYSTEMCMDS_MIXER=y
 CONFIG_SYSTEMCMDS_MOTOR_TEST=y
-CONFIG_SYSTEMCMDS_MTD=y
 CONFIG_SYSTEMCMDS_NSHTERM=y
 CONFIG_SYSTEMCMDS_PARAM=y
 CONFIG_SYSTEMCMDS_PERF=y

boards/matek/h743-slim/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -115,6 +116,8 @@ CONFIG_PTHREAD_STACK_MIN=512
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -124,7 +127,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/modalai/fc-v1/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -123,6 +124,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -132,7 +135,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC2_SDIO_PULLUP=y

boards/modalai/fc-v2/nuttx-config/nsh/defconfig

@@ -72,6 +72,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -136,7 +137,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC2_SDIO_PULLUP=y

boards/modalai/fc-v2/src/mtd.cpp

@@ -41,18 +41,12 @@ static const px4_mft_device_t spi5 = {             // FM25V02A on FMUM 32K 512 X
 
 static const px4_mtd_entry_t fmum_fram = {
 	.device = &spi5,
-	.npart = 2,
+	.npart = 1,
 	.partd = {
 		{
 			.type = MTD_PARAMETERS,
 			.path = "/fs/mtd_params",
-			.nblocks = 32
-		},
-		{
-			.type = MTD_WAYPOINTS,
-			.path = "/fs/mtd_waypoints",
-			.nblocks = 32
-
+			.nblocks = 64
 		}
 	},
 };

boards/mro/ctrl-zero-f7-oem/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -123,6 +124,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -132,7 +135,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y

boards/mro/ctrl-zero-f7/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -123,6 +124,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -132,7 +135,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y

boards/mro/ctrl-zero-h7-oem/default.px4board

@@ -39,6 +39,7 @@ CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
@@ -62,7 +63,6 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
@@ -73,8 +73,8 @@ CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_VMOUNT=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_ESC_CALIB=y

boards/mro/ctrl-zero-h7-oem/init/rc.board_defaults

@@ -6,5 +6,4 @@
 param set-default BAT1_V_DIV 10.1
 param set-default BAT1_A_PER_V 24
 
-
 safety_button start

boards/mro/ctrl-zero-h7-oem/nuttx-config/bootloader/defconfig

@@ -30,7 +30,7 @@ CONFIG_BOARD_RESET_ON_ASSERT=2
 CONFIG_C99_BOOL8=y
 CONFIG_CDCACM=y
 CONFIG_CDCACM_IFLOWCONTROL=y
-CONFIG_CDCACM_PRODUCTID=0x1023
+CONFIG_CDCACM_PRODUCTID=0x1024
 CONFIG_CDCACM_PRODUCTSTR="PX4 BL mRo ControlZeroH7 OEM"
 CONFIG_CDCACM_RXBUFSIZE=600
 CONFIG_CDCACM_TXBUFSIZE=12000

boards/mro/ctrl-zero-h7-oem/nuttx-config/include/board.h

@@ -222,34 +222,35 @@
 
 
 /* UART/USART */
-#define GPIO_USART2_RX   GPIO_USART2_RX_2       /* PD6 */
-#define GPIO_USART2_TX   GPIO_USART2_TX_2       /* PD5 */
-#define GPIO_USART2_RTS  GPIO_USART2_RTS_2      /* PD4 */
-#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2  /* PD3 */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2      /* PD5  */
+#define GPIO_USART2_RX   GPIO_USART2_RX_2      /* PD6  */
+#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2 /* PD3  */
+#define GPIO_USART2_RTS  GPIO_USART2_RTS_2     /* PD4  */
 
-#define GPIO_USART3_RX   GPIO_USART3_RX_3       /* PD9 */
-#define GPIO_USART3_TX   GPIO_USART3_TX_3       /* PD8 */
-#define GPIO_USART3_RTS  GPIO_USART3_RTS_2      /* PD12 */
-#define GPIO_USART3_CTS  GPIO_USART3_CTS_NSS_2  /* PD11 */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3      /* PD8  */
+#define GPIO_USART3_RX   GPIO_USART3_RX_3      /* PD9  */
+#define GPIO_USART3_CTS  GPIO_USART3_CTS_NSS_2 /* PD11 */
+#define GPIO_USART3_RTS  GPIO_USART3_RTS_2     /* PD12 */
 
-#define GPIO_UART4_RX    GPIO_UART4_RX_1        /* PA1 */
-#define GPIO_UART4_TX    GPIO_UART4_TX_1        /* PA0 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_2       /* PA0  */
+#define GPIO_UART4_RX    GPIO_UART4_RX_2       /* PA1  */
 
-#define GPIO_USART6_RX   GPIO_USART6_RX_1       /* PC7 */
-#define GPIO_USART6_TX   GPIO_USART6_TX_2       /* PG14 */
+#define GPIO_USART6_TX   0                     /* USART6 is RX-only */
+#define GPIO_USART6_RX   GPIO_USART6_RX_1      /* PC7  */
 
-#define GPIO_UART7_RX    GPIO_UART7_RX_1        /* PE7 */
-#define GPIO_UART7_TX    GPIO_UART7_TX_1        /* PE8 */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3       /* PE8  */
+#define GPIO_UART7_RX    GPIO_UART7_RX_3       /* PE7  */
 
-#define GPIO_UART8_RX    GPIO_UART8_RX_1        /* PE0 */
-#define GPIO_UART8_TX    GPIO_UART8_TX_1        /* PE1 */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1       /* PE1  */
+#define GPIO_UART8_RX    GPIO_UART8_RX_1       /* PE0  */
 
 
 /* CAN */
-#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
-#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1 */
-#define GPIO_CAN2_RX     GPIO_CAN2_RX_1     /* PB12 */
-#define GPIO_CAN2_TX     GPIO_CAN2_TX_1     /* PB13 */
+#define GPIO_CAN1_RX     GPIO_CAN1_RX_3        /* PD0  */
+#define GPIO_CAN1_TX     GPIO_CAN1_TX_3        /* PD1  */
+
+#define GPIO_CAN2_RX     GPIO_CAN2_RX_1        /* PB12 */
+#define GPIO_CAN2_TX     GPIO_CAN2_TX_1        /* PB13 */
 
 
 /* SPI */

boards/mro/ctrl-zero-h7-oem/nuttx-config/nsh/defconfig

@@ -73,6 +73,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -137,7 +138,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/mro/ctrl-zero-h7-oem/nuttx-config/scripts/script.ld

@@ -199,7 +199,6 @@ SECTIONS
 	} > AXI_SRAM
 
 	/* Emit the the D3 power domain section for locating BDMA data */
-
 	.sram4_reserve (NOLOAD) :
 	{
 		*(.sram4)

boards/mro/ctrl-zero-h7-oem/src/board_config.h

@@ -77,7 +77,6 @@
 
 /* CAN Silence: Silent mode control */
 #define GPIO_CAN1_SILENT_S0  /* PF5  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN5)
-#define GPIO_CAN2_SILENT_S0  /* PF5  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN5)
 
 /* PWM */
 #define DIRECT_PWM_OUTPUT_CHANNELS  8
@@ -169,7 +168,6 @@
 		GPIO_CAN2_TX,                     \
 		GPIO_CAN2_RX,                     \
 		GPIO_CAN1_SILENT_S0,              \
-		GPIO_CAN2_SILENT_S0,              \
 		GPIO_nPOWER_IN_A,                 \
 		GPIO_VDD_3V3_SPEKTRUM_POWER_EN,   \
 		GPIO_TONE_ALARM_IDLE,             \

boards/mro/ctrl-zero-h7/default.px4board

@@ -40,6 +40,7 @@ CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=y
 CONFIG_MODULES_BATTERY_STATUS=y
 CONFIG_MODULES_CAMERA_FEEDBACK=y
 CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_DATAMAN=y
 CONFIG_MODULES_EKF2=y
 CONFIG_MODULES_ESC_BATTERY=y
@@ -63,7 +64,6 @@ CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
 CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
 CONFIG_MODULES_MC_POS_CONTROL=y
 CONFIG_MODULES_MC_RATE_CONTROL=y
-CONFIG_MODULES_CONTROL_ALLOCATOR=y
 CONFIG_MODULES_NAVIGATOR=y
 CONFIG_MODULES_RC_UPDATE=y
 CONFIG_MODULES_ROVER_POS_CONTROL=y
@@ -74,8 +74,8 @@ CONFIG_MODULES_UUV_ATT_CONTROL=y
 CONFIG_MODULES_UUV_POS_CONTROL=y
 CONFIG_MODULES_VMOUNT=y
 CONFIG_MODULES_VTOL_ATT_CONTROL=y
-CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
 CONFIG_SYSTEMCMDS_DMESG=y
 CONFIG_SYSTEMCMDS_DUMPFILE=y
 CONFIG_SYSTEMCMDS_ESC_CALIB=y

boards/mro/ctrl-zero-h7/nuttx-config/include/board.h

@@ -221,32 +221,32 @@
 
 
 /* UART/USART */
-#define GPIO_USART2_RX   GPIO_USART2_RX_2       /* PD6 */
-#define GPIO_USART2_TX   GPIO_USART2_TX_2       /* PD5 */
-#define GPIO_USART2_RTS  GPIO_USART2_RTS_2      /* PD4 */
-#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2  /* PD3 */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2      /* PD5  */
+#define GPIO_USART2_RX   GPIO_USART2_RX_2      /* PD6  */
+#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2 /* PD3  */
+#define GPIO_USART2_RTS  GPIO_USART2_RTS_2     /* PD4  */
 
-#define GPIO_USART3_RX   GPIO_USART3_RX_3       /* PD9 */
-#define GPIO_USART3_TX   GPIO_USART3_TX_3       /* PD8 */
-#define GPIO_USART3_RTS  GPIO_USART3_RTS_2      /* PD12 */
-#define GPIO_USART3_CTS  GPIO_USART3_CTS_NSS_2  /* PD11 */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3      /* PD8  */
+#define GPIO_USART3_RX   GPIO_USART3_RX_3      /* PD9  */
+#define GPIO_USART3_CTS  GPIO_USART3_CTS_NSS_2 /* PD11 */
+#define GPIO_USART3_RTS  GPIO_USART3_RTS_2     /* PD12 */
 
-#define GPIO_UART4_RX    GPIO_UART4_RX_1        /* PA1 */
-#define GPIO_UART4_TX    GPIO_UART4_TX_1        /* PA0 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_2       /* PA0  */
+#define GPIO_UART4_RX    GPIO_UART4_RX_2       /* PA1  */
 
-#define GPIO_USART6_RX   GPIO_USART6_RX_1       /* PC7 */
-#define GPIO_USART6_TX   GPIO_USART6_TX_2       /* PG14 */
+#define GPIO_USART6_TX   0                     /* USART6 is RX-only */
+#define GPIO_USART6_RX   GPIO_USART6_RX_1      /* PC7  */
 
-#define GPIO_UART7_RX    GPIO_UART7_RX_1        /* PE7 */
-#define GPIO_UART7_TX    GPIO_UART7_TX_1        /* PE8 */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3       /* PE8  */
+#define GPIO_UART7_RX    GPIO_UART7_RX_3       /* PE7  */
 
-#define GPIO_UART8_RX    GPIO_UART8_RX_1        /* PE0 */
-#define GPIO_UART8_TX    GPIO_UART8_TX_1        /* PE1 */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1       /* PE1  */
+#define GPIO_UART8_RX    GPIO_UART8_RX_1       /* PE0  */
 
 
 /* CAN */
-#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
-#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1 */
+#define GPIO_CAN1_RX     GPIO_CAN1_RX_3        /* PD0  */
+#define GPIO_CAN1_TX     GPIO_CAN1_TX_3        /* PD1  */
 
 
 /* SPI */
@@ -262,7 +262,7 @@
 
 #define GPIO_SPI5_SCK    ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7  */
 #define GPIO_SPI5_MISO   GPIO_SPI5_MISO_1               /* PF8  */
-#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_1               /* PF9  */
+#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_2               /* PF9  */
 
 
 /* I2C */

boards/mro/ctrl-zero-h7/nuttx-config/nsh/defconfig

@@ -73,6 +73,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -137,7 +138,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/mro/pixracerpro/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -135,7 +136,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_PULLUP=y

boards/mro/x21-777/nuttx-config/nsh/defconfig

@@ -71,6 +71,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_MAX_TASKS=64
@@ -123,6 +124,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=245760
 CONFIG_RAM_START=0x20010000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC_DATETIME=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -132,7 +135,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDMMC1_SDIO_MODE=y

boards/mro/x21/nuttx-config/nsh/defconfig

@@ -68,6 +68,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
 CONFIG_FS_PROCFS_REGISTER=y
@@ -127,7 +128,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y

boards/nxp/fmuk66-e/nuttx-config/nsh/defconfig

@@ -52,6 +52,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
@@ -184,7 +185,7 @@ CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_NNESTPRIO=8

boards/nxp/fmuk66-e/nuttx-config/socketcan/defconfig

@@ -53,6 +53,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
@@ -184,7 +185,7 @@ CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_NNESTPRIO=8

boards/nxp/fmuk66-v3/nuttx-config/nsh/defconfig

@@ -53,6 +53,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
@@ -182,7 +183,7 @@ CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_NNESTPRIO=8

boards/nxp/fmuk66-v3/nuttx-config/socketcan/defconfig

@@ -54,6 +54,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
@@ -183,7 +184,7 @@ CONFIG_SCHED_HPWORKSTACKSIZE=1280
 CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SEM_NNESTPRIO=8

boards/nxp/fmurt1062-v1/nuttx-config/nsh/defconfig

@@ -59,6 +59,7 @@ CONFIG_FS_BINFS=y
 CONFIG_FS_CROMFS=y
 CONFIG_FS_FAT=y
 CONFIG_FS_FATTIME=y
+CONFIG_FS_LITTLEFS=y
 CONFIG_FS_PROCFS=y
 CONFIG_FS_PROCFS_REGISTER=y
 CONFIG_FS_ROMFS=y
@@ -190,6 +191,8 @@ CONFIG_RAMTRON_SETSPEED=y
 CONFIG_RAM_SIZE=1048576
 CONFIG_RAM_START=0x20200000
 CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
 CONFIG_RTC=y
 CONFIG_SCHED_ATEXIT=y
 CONFIG_SCHED_HPWORK=y
@@ -199,7 +202,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SDIO_BLOCKSETUP=y

boards/nxp/ucans32k146/nuttx-config/nsh/defconfig

@@ -97,7 +97,7 @@ CONFIG_SCHED_INSTRUMENTATION=y
 CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
 CONFIG_SCHED_LPWORK=y
 CONFIG_SCHED_LPWORKPRIORITY=50
-CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_LPWORKSTACKSIZE=1932
 CONFIG_SCHED_WAITPID=y
 CONFIG_SDCLONE_DISABLE=y
 CONFIG_SERIAL_TERMIOS=y