Basic gps base station app

* FW Attitdue controller: fix throttle in acro (use _rate_sp.throttle_body)

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

* FW Attitude controller: do manual control polling before attitude setpoint polling

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>

.ci/Jenkinsfile-compile

@@ -42,6 +42,8 @@ pipeline {
                      "ark_can-gps_default",
                      "ark_can-rtk-gps_canbootloader",
                      "ark_can-rtk-gps_default",
+                     "ark_fmu-v6x_bootloader",
+                     "ark_fmu-v6x_default",
                      "atl_mantis-edu_default",
                      "av_x-v1_default",
                      "bitcraze_crazyflie_default",
@@ -69,6 +71,7 @@ pipeline {
                      "modalai_fc-v1_default",
                      "modalai_fc-v1_rtps",
                      "modalai_fc-v2_default",
+                     "modalai_voxl2-io_default",
                      "mro_ctrl-zero-f7_default",
                      "mro_ctrl-zero-f7-oem_default",
                      "mro_ctrl-zero-h7-oem_default",

.github/workflows/checks.yml

@@ -23,6 +23,7 @@ jobs:
           "shellcheck_all",
           "NO_NINJA_BUILD=1 px4_fmu-v5_default",
           "NO_NINJA_BUILD=1 px4_sitl_default",
+          "NO_NINJA_BUILD=1 px4_sitl_gps_base",
           "BUILD_MICRORTPS_AGENT=1 px4_sitl_rtps",
           "airframe_metadata",
           "module_documentation",

.github/workflows/compile_nuttx.yml

@@ -21,6 +21,7 @@ jobs:
           ark_can-gps,
           ark_can-rtk-gps,
           ark_cannode,
+          ark_fmu-v6x,
           atl_mantis-edu,
           av_x-v1,
           bitcraze_crazyflie,

.vscode/cmake-variants.yaml

@@ -6,6 +6,11 @@ CONFIG:
       buildType: RelWithDebInfo
       settings:
         CONFIG: px4_sitl_default
+    px4_sitl_gps_base:
+      short: px4_sitl_gps_base
+      buildType: RelWithDebInfo
+      settings:
+        CONFIG: px4_sitl_gps_base
     px4_sitl_rtps:
       short: px4_sitl_rtps
       buildType: RelWithDebInfo
@@ -131,6 +136,16 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: ark_cannode_canbootloader
+    ark_fmu-v6x_bootloader:
+      short: ark_fmu-v6x_bootloader
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_fmu-v6x_bootloader
+    ark_fmu-v6x_default:
+      short: ark_fmu-v6x_default
+      buildType: MinSizeRel
+      settings:
+        CONFIG: ark_fmu-v6x_default
     atl_mantis-edu_default:
       short: atl_mantis-edu
       buildType: MinSizeRel
@@ -226,6 +241,11 @@ CONFIG:
       buildType: MinSizeRel
       settings:
         CONFIG: modalai_fc-v2_default
+    modalai_voxl2-io_default:
+      short: modalai_voxl2-io
+      buildType: MinSizeRel
+      settings:
+        CONFIG: modalai_voxl2-io_default
     mro_ctrl-zero-f7_default:
       short: mro_ctrl-zero-f7
       buildType: MinSizeRel

.vscode/tasks.json

@@ -218,10 +218,10 @@
             "options": {
                 "cwd": "${workspaceFolder}",
                 "env": {
-                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/ignition/models",
+                    "IGN_GAZEBO_RESOURCE_PATH": "${workspaceFolder}/Tools/simulation/gz/models",
                 }
             },
-            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/ignition/worlds/${input:ignWorld}.sdf",
+            "command": "ign gazebo -v 4 -r ${workspaceFolder}/Tools/simulation/gz/worlds/${input:gzWorld}.sdf",
             "isBackground": true,
             "presentation": {
                 "echo": true,
@@ -342,8 +342,8 @@
     "inputs": [
         {
             "type": "pickString",
-            "id": "ignWorld",
-            "description": "Ignition world",
+            "id": "gzWorld",
+            "description": "gz world",
             "options": [
                 "default"
             ],

Makefile

@@ -320,6 +320,7 @@ px4io_update:
 	@$(MAKE) --no-print-directory px4_io-v2_default
 	@$(MAKE) --no-print-directory cubepilot_io-v2_default
 	# px4_io-v2_default
+	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/ark/fmu-v6x/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/durandal-v1/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/holybro/pix32v5/extras/px4_io-v2_default.bin
 	cp build/px4_io-v2_default/px4_io-v2_default.bin boards/mro/x21/extras/px4_io-v2_default.bin
@@ -336,7 +337,7 @@ px4io_update:
 	cp build/cubepilot_io-v2_default/cubepilot_io-v2_default.bin boards/cubepilot/cubeyellow/extras/cubepilot_io-v2_default.bin
 	git status
 
-bootloaders_update: cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
+bootloaders_update: ark_fmu-v6x_bootloader cuav_nora_bootloader cuav_x7pro_bootloader cubepilot_cubeorange_bootloader holybro_durandal-v1_bootloader holybro_kakuteh7_bootloader matek_h743_bootloader matek_h743-mini_bootloader matek_h743-slim_bootloader modalai_fc-v2_bootloader mro_ctrl-zero-classic_bootloader mro_ctrl-zero-h7_bootloader mro_ctrl-zero-h7-oem_bootloader mro_pixracerpro_bootloader px4_fmu-v6c_bootloader px4_fmu-v6u_bootloader px4_fmu-v6x_bootloader
 	git status
 
 .PHONY: coverity_scan

ROMFS/px4fmu_common/init.d-posix/airframes/1039_advanced_plane

@@ -0,0 +1,70 @@
+#!/bin/sh
+#
+# @name Advanced Plane SITL
+#
+
+. ${R}etc/init.d/rc.fw_defaults
+
+param set-default EKF2_MAG_ACCLIM 0
+param set-default EKF2_MAG_YAWLIM 0
+
+param set-default FW_LND_AIRSPD_SC 1
+param set-default FW_LND_ANG 8
+param set-default FW_THR_LND_MAX 0
+
+param set-default FW_L1_PERIOD 12
+
+param set-default FW_MAN_P_MAX 30
+
+param set-default FW_PSP_OFF 2
+param set-default FW_P_LIM_MAX 32
+param set-default FW_P_LIM_MIN -15
+
+param set-default FW_SPOILERS_LND 0.4
+
+param set-default FW_THR_MIN 0.05
+param set-default FW_THR_TRIM 0.25
+
+param set-default FW_T_CLMB_MAX 8
+param set-default FW_T_SINK_MAX 2.7
+param set-default FW_T_SINK_MIN 2.2
+
+param set-default FW_W_EN 1
+
+param set-default MIS_LTRMIN_ALT 30
+param set-default MIS_TAKEOFF_ALT 30
+
+param set-default NAV_ACC_RAD 15
+param set-default NAV_DLL_ACT 2
+
+param set-default RWTO_TKOFF 1
+
+#param set-default SYS_CTRL_ALLOC 1
+param set-default CA_AIRFRAME 1
+
+param set-default CA_ROTOR_COUNT 1
+param set-default CA_ROTOR0_PX 0.3
+
+param set-default CA_SV_CS_COUNT 6
+param set-default CA_SV_CS0_TRQ_R -0.5
+param set-default CA_SV_CS0_TYPE 1
+param set-default CA_SV_CS1_TRQ_R 0.5
+param set-default CA_SV_CS1_TYPE 2
+param set-default CA_SV_CS2_TRQ_P 1.0
+param set-default CA_SV_CS2_TYPE 3
+param set-default CA_SV_CS3_TRQ_Y 1.0
+param set-default CA_SV_CS3_TYPE 4
+param set-default CA_SV_CS4_TYPE 9
+param set-default CA_SV_CS5_TYPE 10
+param set-default PWM_MAIN_FUNC3 204
+param set-default PWM_MAIN_FUNC4 205
+param set-default PWM_MAIN_FUNC5 101
+param set-default PWM_MAIN_FUNC6 201
+param set-default PWM_MAIN_FUNC7 202
+param set-default PWM_MAIN_FUNC8 203
+param set-default PWM_MAIN_FUNC9 206
+param set-default PWM_MAIN_REV 256
+
+
+set MIXER_FILE etc/mixers-sitl/plane_sitl.main.mix
+set MIXER custom

ROMFS/px4fmu_common/init.d-posix/airframes/1040_standard_vtol

@@ -61,6 +61,7 @@ param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
+param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 param set-default MC_YAW_P 1.6
 

ROMFS/px4fmu_common/init.d-posix/airframes/1041_tailsitter

@@ -58,6 +58,7 @@ param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 param set-default FW_T_TAS_TC 2
 
+param set-default MC_AIRMODE 1
 param set-default MC_ROLLRATE_P 0.3
 
 param set-default MPC_ACC_HOR_MAX 2

ROMFS/px4fmu_common/init.d-posix/airframes/1042_tiltrotor

@@ -34,8 +34,6 @@ param set-default CA_SV_CS1_TYPE 2
 param set-default CA_SV_CS2_TRQ_P 1.0
 param set-default CA_SV_CS2_TYPE 3
 param set-default CA_SV_CS_COUNT 3
-param set-default CA_SV_TL0_CT 0
-param set-default CA_SV_TL1_CT 0
 param set-default CA_SV_TL_COUNT 2
 
 param set-default PWM_MAIN_FUNC1 101
@@ -62,6 +60,7 @@ param set-default FW_T_CLMB_MAX 8
 param set-default FW_T_SINK_MAX 2.7
 param set-default FW_T_SINK_MIN 2.2
 
+param set-default MC_AIRMODE 1
 param set-default MC_YAWRATE_P 0.3
 param set-default MC_YAWRATE_I 0.3
 

ROMFS/px4fmu_common/init.d-posix/airframes/4001_x500

@@ -1,15 +1,15 @@
 #!/bin/sh
 #
-# @name Ignition Gazebo X3
+# @name Gazebo x500
 #
 # @type Quadrotor
 #
 
 . ${R}etc/init.d/rc.mc_defaults
 
-PX4_SIMULATOR=${PX4_SIMULATOR:=ignition}
+PX4_SIMULATOR=${PX4_SIMULATOR:=gz}
+PX4_GZ_WORLD=${PX4_GZ_WORLD:=default}
 PX4_SIM_MODEL=${PX4_SIM_MODEL:=x500}
-PX4_SIM_WORLD=${PX4_SIM_WORLD:=default}
 
 param set-default CA_AIRFRAME 0
 param set-default CA_ROTOR_COUNT 4
@@ -30,19 +30,19 @@ param set-default CA_ROTOR3_PX -0.13
 param set-default CA_ROTOR3_PY 0.20
 param set-default CA_ROTOR3_KM -0.05
 
-param set-default SIM_IGN_FUNC1 101
-param set-default SIM_IGN_FUNC2 102
-param set-default SIM_IGN_FUNC3 103
-param set-default SIM_IGN_FUNC4 104
+param set-default SIM_GZ_FUNC1 101
+param set-default SIM_GZ_FUNC2 102
+param set-default SIM_GZ_FUNC3 103
+param set-default SIM_GZ_FUNC4 104
 
-param set-default SIM_IGN_MIN1 150
-param set-default SIM_IGN_MIN2 150
-param set-default SIM_IGN_MIN3 150
-param set-default SIM_IGN_MIN4 150
+param set-default SIM_GZ_MIN1 150
+param set-default SIM_GZ_MIN2 150
+param set-default SIM_GZ_MIN3 150
+param set-default SIM_GZ_MIN4 150
 
-param set-default SIM_IGN_MAX1 1000
-param set-default SIM_IGN_MAX2 1000
-param set-default SIM_IGN_MAX3 1000
-param set-default SIM_IGN_MAX4 1000
+param set-default SIM_GZ_MAX1 1000
+param set-default SIM_GZ_MAX2 1000
+param set-default SIM_GZ_MAX3 1000
+param set-default SIM_GZ_MAX4 1000
 
 param set-default MPC_THR_HOVER 0.60

ROMFS/px4fmu_common/init.d-posix/airframes/CMakeLists.txt

@@ -61,6 +61,7 @@ px4_add_romfs_files(
 	1036_malolo
 	1037_believer
 	1038_glider
+	1039_advanced_plane
 	1040_standard_vtol
 	1041_tailsitter
 	1042_tiltrotor

ROMFS/px4fmu_common/init.d-posix/px4-rc.simulator

@@ -17,7 +17,7 @@ if [ "$PX4_SIMULATOR" = "sihsim" ] || [ "$(param show -q SYS_AUTOSTART)" -eq "0"
 		exit 1
 	fi
 
-elif [ "$PX4_SIMULATOR" = "ignition" ]; then
+elif [ "$PX4_SIMULATOR" = "gz" ]; then
 
 	# source generated gazebo_env.sh for IGN_GAZEBO_RESOURCE_PATH
 	if [ -f gazebo_env.sh ]; then
@@ -26,28 +26,52 @@ elif [ "$PX4_SIMULATOR" = "ignition" ]; then
 		. ../gazebo_env.sh
 	fi
 
-	ign_world=$( ign topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
+# shellcheck disable=SC2236
+	if [ ! -z $PX4_GZ_VERBOSE ]; then
+		if [ "$PX4_GZ_VERBOSE" -le "4" ] && [ "$PX4_GZ_VERBOSE" -ge "1" ]; then
+			gz_verbose=$PX4_GZ_VERBOSE
+		else
+			gz_verbose=4
+			echo "WARN  [init] PX4_GZ_VERBOSE was passed: $PX4_GZ_VERBOSE, not in range [1,4], defaulting to: $gz_verbose."
+		fi
+		echo "INFO  [init] PX4_GZ_VERBOSE set to $gz_verbose."
+	else
+		gz_verbose=1
+		echo "INFO  [init] PX4_GZ_VERBOSE not explicitly set, defaulting to: $gz_verbose."
+	fi
 
-	if [ -z $ign_world ]; then
+	gz_world=$( ign topic -l | grep -m 1 -e "/world/.*/clock" | sed 's/\/world\///g; s/\/clock//g' )
 
-		# starting ign gazebo with ${PX4_SIM_WORLD} world
+	if [ -z $gz_world ]; then
+
+		# starting ign gazebo with ${PX4_GZ_WORLD} world
 		echo "INFO  [init] starting ign gazebo"
-
-		ign gazebo --verbose=1 -r -s "${PX4_IGN_GAZEBO_WORLDS}/${PX4_SIM_WORLD}.sdf" &
+# shellcheck disable=SC2153
+		ign gazebo --verbose=$gz_verbose -r -s "${PX4_GZ_WORLDS}/${PX4_GZ_WORLD}.sdf" &
 
 		if [ -z $HEADLESS ]; then
 			# HEADLESS not set, starting ign gazebo gui
 			ign gazebo -g &
 		fi
 	else
-		echo "INFO  [init] ign gazebo already running world: $ign_world"
-		PX4_SIM_WORLD=$ign_world
+		echo "INFO  [init] ign gazebo already running world: $gz_world"
+		PX4_GZ_WORLD=$gz_world
 	fi
 
-	if [ -z $PX4_IGN_MODEL_POSE ]; then
-		# start ignition bridge without pose arg.
-		echo "WARN  [init] PX4_IGN_MODEL_POSE not set, spawning at origin."
-		if simulator_ignition_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_SIM_WORLD}"; then
+# shellcheck disable=SC2236
+	if [ ! -z $PX4_GZ_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ]; then
+
+# shellcheck disable=SC2236
+		if [ ! -z $PX4_GZ_MODEL_POSE ]; then
+			# Clean potential input line formatting.
+			model_pose="$( echo ${PX4_GZ_MODEL_POSE} | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
+			echo "INFO  [init] PX4_GZ_MODEL_POSE set, spawning at: ${model_pose}"
+		else
+			echo "WARN  [init] PX4_GZ_MODEL_POSE not set, spawning at origin."
+			model_pose="0,0,0,0,0,0"
+		fi
+		# start gz bridge with pose arg.
+		if gz_bridge start -p "${model_pose}"  -m "${PX4_GZ_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
 			sensor_baro_sim start
 			sensor_gps_sim start
 			sensor_mag_sim start
@@ -55,22 +79,29 @@ elif [ "$PX4_SIMULATOR" = "ignition" ]; then
 			echo "ERROR  [init] ign gazebo failed to start"
 			exit 1
 		fi
+	elif [ ! -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
+		if gz_bridge start -n "${PX4_GZ_MODEL_NAME}" -w "${PX4_GZ_WORLD}"; then
+			sensor_baro_sim start
+			sensor_gps_sim start
+			sensor_mag_sim start
+		else
+			echo "ERROR  [init] ign gazebo failed to start"
+			exit 1
+		fi
+	elif [ ! -z $PX4_SIM_MODEL ] && [ -z $PX4_GZ_MODEL_NAME ] && [ -z $PX4_GZ_MODEL ]; then
+		echo "WARN  [init] PX4_GZ_MODEL_NAME or PX4_GZ_MODEL not set using PX4_SIM_MODEL."
+		if gz_bridge start -m "${PX4_SIM_MODEL}" -w "${PX4_GZ_WORLD}" -i "${px4_instance}"; then
+			sensor_baro_sim start
+			sensor_gps_sim start
+			sensor_mag_sim start
+		else
+			echo "ERROR  [init] ign gazebo failed to start"
+			exit 1
+		fi
+
 	else
-
-		# Clean potential input line formatting.
-		model_pose="$( echo ${PX4_IGN_MODEL_POSE} | sed -e 's/^[ \t]*//; s/[ \t]*$//; s/,/ /g; s/  / /g; s/ /,/g' )"
-		echo "INFO  [init] PX4_IGN_MODEL_POSE set, spawning at: ${model_pose}"
-
-		# start ignition bridge with pose arg.
-		if simulator_ignition_bridge start -p "${model_pose}"  -m "${PX4_SIM_MODEL}" -w "${PX4_SIM_WORLD}"; then
-			sensor_baro_sim start
-			sensor_gps_sim start
-			sensor_mag_sim start
-		else
-			echo "ERROR  [init] ign gazebo failed to start"
-			exit 1
-		fi
-
+		echo "ERROR  [init] failed to pass only PX4_GZ_MODEL_NAME or PX4_GZ_MODEL"
+		exit 1
 	fi
 
 else

ROMFS/px4fmu_common/init.d/airframes/4016_holybro_px4vision

@@ -1,6 +1,6 @@
 #!/bin/sh
 #
-# @name PX4 Vision DevKit Platform
+# @name PX4 Vision Dev Kit v1
 #
 # @type Quadrotor x
 # @class Copter

ROMFS/px4fmu_common/init.d/airframes/4020_holybro_px4vision_v1_5

@@ -0,0 +1,127 @@
+#!/bin/sh
+#
+# @name PX4 Vision Dev Kit v1.5
+#
+# @type Quadrotor x
+# @class Copter
+#
+# @board px4_fmu-v2 exclude
+# @board bitcraze_crazyflie exclude
+#
+
+. ${R}etc/init.d/rc.mc_defaults
+
+# Commander Parameters
+param set-default COM_OBS_AVOID 1
+param set-default COM_DISARM_LAND 0.5
+
+# EKF2 parameters
+param set-default EKF2_AID_MASK 35
+param set-default EKF2_IMU_POS_X 0.02
+param set-default EKF2_GPS_POS_X 0.055
+param set-default EKF2_GPS_POS_Z -0.15
+param set-default EKF2_MIN_RNG 0.03
+param set-default EKF2_OF_POS_X 0.055
+param set-default EKF2_OF_POS_Y 0.02
+param set-default EKF2_OF_POS_Z 0.065
+param set-default EKF2_REQ_HDRIFT 0.3
+param set-default EKF2_REQ_SACC 1
+param set-default EKF2_REQ_VDRIFT 0.3
+param set-default EKF2_RNG_A_HMAX 8
+param set-default EKF2_RNG_A_VMAX 2
+param set-default EKF2_RNG_POS_X 0.055
+param set-default EKF2_RNG_POS_Y -0.01
+param set-default EKF2_RNG_POS_Z 0.065
+param set-default EKF2_PCOEF_XP -0.25
+param set-default EKF2_PCOEF_YN -0.55
+param set-default EKF2_PCOEF_YP -0.55
+
+# MAVLink parameters
+param set-default MAV_0_CONFIG 101
+param set-default MAV_1_CONFIG 102
+param set-default MAV_1_RATE 80000
+param set-default MAV_1_MODE 9
+param set-default SER_TEL1_BAUD 921600
+
+# Vehicle attitude PID tuning
+param set-default MC_ACRO_EXPO 0
+param set-default MC_ACRO_EXPO_Y 0
+param set-default MC_ACRO_P_MAX 200
+param set-default MC_ACRO_R_MAX 200
+param set-default MC_ACRO_SUPEXPO 0
+param set-default MC_ACRO_SUPEXPOY 0
+param set-default MC_ACRO_Y_MAX 150
+param set-default MC_PITCHRATE_D 0.0015
+param set-default MC_ROLLRATE_D 0.0015
+param set-default MC_YAWRATE_P 0.3
+
+# Position Control Tuning
+param set-default CP_DIST 6
+param set-default MPC_ACC_DOWN_MAX 5
+param set-default MPC_ACC_HOR_MAX 10
+param set-default MPC_ACC_UP_MAX 4
+param set-default MPC_MANTHR_MIN 0
+param set-default MPC_MAN_Y_MAX 120
+param set-default MPC_TILTMAX_AIR 45
+param set-default MPC_THR_HOVER 0.3
+param set-default MPC_TKO_SPEED 1
+param set-default MPC_VEL_MANUAL 5
+param set-default MPC_XY_CRUISE 5
+param set-default MPC_XY_VEL_MAX 5
+param set-default MPC_XY_VEL_P_ACC 1.58
+param set-default MPC_XY_TRAJ_P 0.3
+param set-default MPC_Z_TRAJ_P 0.3
+param set-default MPC_Z_VEL_P_ACC 5
+param set-default MPC_Z_VEL_I_ACC 3
+param set-default MPC_LAND_ALT1 3
+param set-default MPC_LAND_ALT2 1
+param set-default MPC_POS_MODE 3
+param set-default CP_GO_NO_DATA 1
+
+# Navigator Parameters
+param set-default NAV_ACC_RAD 2
+
+# RTL Parameters
+param set-default RTL_DESCEND_ALT 5
+param set-default RTL_RETURN_ALT 5
+
+# Logging Parameters
+param set-default SDLOG_PROFILE 131
+
+# Sensors Parameters
+param set-default SENS_CM8JL65_CFG 202
+param set-default SENS_FLOW_MAXHGT 25
+param set-default SENS_FLOW_MINHGT 0.5
+param set-default IMU_GYRO_CUTOFF 100
+param set-default SENS_TFLOW_CFG 103
+
+# Power Parameters
+param set-default BAT1_N_CELLS 4
+param set-default BAT1_A_PER_V 36.364
+param set-default BAT1_V_DIV 18.182
+
+# Circuit breakers
+param set-default CBRK_IO_SAFETY 22027
+
+param set-default THR_MDL_FAC 0.3
+
+param set-default CA_ROTOR_COUNT 4
+param set-default CA_ROTOR0_PX 0.15
+param set-default CA_ROTOR0_PY 0.15
+param set-default CA_ROTOR0_KM 0.05
+param set-default CA_ROTOR1_PX -0.15
+param set-default CA_ROTOR1_PY -0.15
+param set-default CA_ROTOR1_KM 0.05
+param set-default CA_ROTOR2_PX 0.15
+param set-default CA_ROTOR2_PY -0.15
+param set-default CA_ROTOR2_KM -0.05
+param set-default CA_ROTOR3_PX -0.15
+param set-default CA_ROTOR3_PY 0.15
+param set-default CA_ROTOR3_KM -0.05
+
+# Outputs
+param set-default PWM_AUX_FUNC1 101
+param set-default PWM_AUX_FUNC2 102
+param set-default PWM_AUX_FUNC3 103
+param set-default PWM_AUX_FUNC4 104
+

ROMFS/px4fmu_common/init.d/airframes/CMakeLists.txt

@@ -57,6 +57,7 @@ px4_add_romfs_files(
 	4016_holybro_px4vision
 	4017_nxp_hovergames
 	4019_x500_v2
+	4020_holybro_px4vision_v1_5
 	4040_reaper
 	4041_beta75x
 	4050_generic_250

Tools/generate_board_targets_json.py

@@ -28,12 +28,13 @@ args = parser.parse_args()
 verbose = args.verbose
 
 build_configs = []
+excluded_boards = ['modalai_voxl2']  # TODO: fix and enable
 excluded_manufacturers = ['atlflight']
 excluded_platforms = ['qurt']
 excluded_labels = [
     'stackcheck',
     'nolockstep', 'replay', 'test',
-    'uavcanv1' # TODO: fix and enable
+    'uavcanv1', # TODO: fix and enable
     ]
 
 def process_target(px4board_file, target_name):
@@ -87,10 +88,18 @@ for manufacturer in os.scandir(os.path.join(source_dir, 'boards')):
     for board in os.scandir(manufacturer.path):
         if not board.is_dir():
             continue
+
         for files in os.scandir(board.path):
             if files.is_file() and files.name.endswith('.px4board'):
+
+                board_name = manufacturer.name + '_' + board.name
                 label = files.name[:-9]
                 target_name = manufacturer.name + '_' + board.name + '_' + label
+
+                if board_name in excluded_boards:
+                    if verbose: print(f'excluding board {board_name} ({target_name})')
+                    continue
+
                 if label in excluded_labels:
                     if verbose: print(f'excluding label {label} ({target_name})')
                     continue

Tools/px4events/srcparser.py

@@ -92,7 +92,7 @@ class SourceParser(object):
     re_comment_start = re.compile(r'^\/\*\s*EVENT$')
     re_events_send = re.compile(r'^events::send[<\(]')
     re_comment_content = re.compile(r'^\*\s*(.*)')
-    re_comment_tag = re.compile(r'^@([a-zA-Z][a-zA-Z0-9_]*):?\s*(.*)')
+    re_comment_tag = re.compile(r'^@([a-zA-Z][a-zA-Z0-9_-]*):?\s*(.*)')
     re_comment_end = re.compile(r'(.*?)\s*\*\/$')
     re_code_end = re.compile(r'(.*?)\s*;$')
     re_template_args = re.compile(r'([a-zA-Z0-9_:\.]+)\s*<([a-zA-Z0-9_,\s:]+)\s*>\s*\((.*)\);$')
@@ -107,7 +107,7 @@ class SourceParser(object):
         """ dict of 'group': [Event] list """
         return self._events
 
-    def Parse(self, contents):
+    def Parse(self, contents, path):
         """
         Incrementally parse program contents and append all found events
         to the list.
@@ -117,7 +117,7 @@ class SourceParser(object):
         # names.
         state = None
         def finalize_current_tag(event, tag, value):
-            if tag is None: return
+            if tag is None: return True
             if tag == "description":
                 descr = value.strip()
                 # merge continued lines (but not e.g. enumerations)
@@ -133,6 +133,9 @@ class SourceParser(object):
                         "If this is not a typo, add the new group to the script".format(event.group, known_groups))
             elif tag == "type":
                 event.type = value.strip()
+            elif tag == "skip-file":
+                print("Skipping file: {:}".format(path))
+                return False
             elif tag.startswith("arg"):
                 arg_index = int(tag[3:])-1
                 arg_name = value.strip()
@@ -140,6 +143,7 @@ class SourceParser(object):
                 event.add_argument(None, arg_name)
             else:
                 raise Exception("Invalid tag: {}\nvalue: {}".format(tag, value))
+            return True
 
         for line in self.re_split_lines.split(contents):
             line = line.strip()
@@ -267,7 +271,8 @@ class SourceParser(object):
                     comment_content = m.group(1)
                     m = self.re_comment_tag.match(comment_content)
                     if m:
-                        finalize_current_tag(event, current_tag, current_value)
+                        if not finalize_current_tag(event, current_tag, current_value):
+                            return True # skip file
                         current_tag, current_value = m.group(1, 2)
                     elif current_tag is not None:
                         current_value += "\n"+comment_content
@@ -277,7 +282,8 @@ class SourceParser(object):
                     # "*" or "*/".
                     raise Exception("Excpected a comment, got '{}'".format(line))
                 if last_comment_line:
-                    finalize_current_tag(event, current_tag, current_value)
+                    if not finalize_current_tag(event, current_tag, current_value):
+                        return True # skip file
                     state = "parse-command"
         return True
 

Tools/px4events/srcscanner.py

@@ -46,7 +46,7 @@ class SourceScanner(object):
                 print('Failed reading file: %s, skipping content.' % path)
                 pass
         try:
-            return parser.Parse(contents)
+            return parser.Parse(contents, path)
         except Exception as e:
             print("Exception while parsing file {}".format(path))
             raise

Tools/setup/ubuntu.sh

@@ -16,6 +16,7 @@ set -e
 INSTALL_NUTTX="true"
 INSTALL_SIM="true"
 INSTALL_ARCH=`uname -m`
+INSTALL_SIM_JAMMY="false"
 
 # Parse arguments
 for arg in "$@"
@@ -28,6 +29,10 @@ do
 		INSTALL_SIM="false"
 	fi
 
+	if [[ $arg == "--sim_jammy" ]]; then
+		INSTALL_SIM_JAMMY="true"
+	fi
+
 done
 
 # detect if running in docker
@@ -67,6 +72,10 @@ elif [[ "${UBUNTU_RELEASE}" == "18.04" ]]; then
 	echo "Ubuntu 18.04"
 elif [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
 	echo "Ubuntu 20.04"
+elif [[ "${UBUNTU_RELEASE}" == "22.04" ]]; then
+	echo "Ubuntu 22.04, simulation build off by default." 
+	echo "Use --sim_jammy to enable simulation build."
+	INSTALL_SIM=$INSTALL_SIM_JAMMY
 fi
 
 
@@ -146,7 +155,7 @@ if [[ $INSTALL_NUTTX == "true" ]]; then
 		util-linux \
 		vim-common \
 		;
-	if [[ "${UBUNTU_RELEASE}" == "20.04" ]]; then
+	if [[ "${UBUNTU_RELEASE}" == "20.04" || "${UBUNTU_RELEASE}" == "22.04" ]]; then
 		sudo DEBIAN_FRONTEND=noninteractive apt-get -y --quiet --no-install-recommends install \
 		kconfig-frontends \
 		;

Tools/simulation/gz/models/x500-Depth/model.sdf

@@ -0,0 +1,17 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<sdf version='1.9'>
+  <model name='x500-Depth'>
+    <include merge='true'>
+      <uri>https://fuel.gazebosim.org/1.0/RudisLaboratories/models/x500-Base</uri>
+    </include>
+    <include merge='true'>
+      <uri>https://fuel.gazebosim.org/1.0/RudisLaboratories/models/OakD-Lite</uri>
+      <pose>.12 .03 .242 0 0 0</pose>
+    </include>
+    <joint name="CameraJoint" type="fixed">
+      <parent>base_link</parent>
+      <child>OakD-Lite/base_link</child>
+      <pose relative_to="base_link">.12 .03 .242 0 0 0</pose>
+    </joint>
+  </model>
+</sdf>

Tools/simulation/gz/models/x500/model.sdf

@@ -0,0 +1,8 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<sdf version='1.9'>
+  <model name='x500'>
+    <include merge='true'>
+      <uri>https://fuel.gazebosim.org/1.0/RudisLaboratories/models/x500-Base</uri>
+    </include>
+  </model>
+</sdf>

Tools/simulation/ignition/models/x500-Base/model.config

@@ -1,11 +0,0 @@
-<?xml version="1.0"?>
-<model>
-  <name>x500-Base</name>
-  <version>1.0</version>
-  <sdf version="1.9">model.sdf</sdf>
-  <author>
-    <name>Benjamin Perseghetti</name>
-    <email>bperseghetti@rudislabs.com</email>
-  </author>
-  <description>Model of the NXP HoverGames Drone development kit (KIT-HGDRONEK66). The PX4 software compatible kit provides mechanical, RC remote and other components needed to evaluate the RDDRONE-FMUK66 reference design. The FMU includes 100Base-T1 Automotive Ethernet, dual CAN transceivers, as well as SE050 secure element, and works with add on boards NavQPlus, MR-T1ETH8, MR-T1ADAPT, and CAN-nodes such as UCANS32K1SIC.  Kit may be used with, and contains the components needed for the HoverGames.com coding challenges.</description>
-</model>

Tools/simulation/ignition/models/x500-Base/model.sdf

@@ -1,516 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<sdf version='1.9'>
-  <model name='x500-Base'>
-    <pose>0 0 .24 0 0 0</pose>
-    <self_collide>false</self_collide>
-    <static>false</static>
-    <link name="base_link">
-      <inertial>
-        <mass>2.0</mass>
-        <inertia>
-          <ixx>0.02166666666666667</ixx>
-          <ixy>0</ixy>
-          <ixz>0</ixz>
-          <iyy>0.02166666666666667</iyy>
-          <iyz>0</iyz>
-          <izz>0.04000000000000001</izz>
-        </inertia>
-      </inertial>
-      <gravity>true</gravity>
-      <velocity_decay/>
-      <visual name="base_link_visual">
-        <pose>0 0 .025 0 0 3.141592654</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/NXP-HGD-CF.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <visual name="5010_motor_base_0">
-        <pose>0.174 0.174 .032 0 0 -.45</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Base.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <visual name="5010_motor_base_1">
-        <pose>-0.174 0.174 .032 0 0 -.45</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Base.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <visual name="5010_motor_base_2">
-        <pose>0.174 -0.174 .032 0 0 -.45</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Base.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <visual name="5010_motor_base_3">
-        <pose>-0.174 -0.174 .032 0 0 -.45</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Base.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <visual name="NXP_FMUK66_FRONT">
-        <pose>0.047 .001 .043 1 0 1.57</pose>
-        <cast_shadows>false</cast_shadows>
-        <geometry>
-          <plane>
-            <normal>0 0 1</normal>
-            <size>.013 .007</size>
-          </plane>
-        </geometry>
-        <material>
-          <diffuse>1.0 1.0 1.0</diffuse>
-          <specular>1.0 1.0 1.0</specular>
-          <pbr>
-            <metal>
-              <albedo_map>model://x500-Base/materials/textures/nxp.png</albedo_map>
-            </metal>
-          </pbr>
-        </material>
-      </visual>
-      <visual name="NXP_FMUK66_TOP">
-        <pose>-0.023 0 .0515 0 0 -1.57</pose>
-        <cast_shadows>false</cast_shadows>
-        <geometry>
-          <plane>
-            <normal>0 0 1</normal>
-            <size>.013 .007</size>
-          </plane>
-        </geometry>
-        <material>
-          <diffuse>1.0 1.0 1.0</diffuse>
-          <specular>1.0 1.0 1.0</specular>
-          <pbr>
-            <metal>
-              <albedo_map>model://x500-Base/materials/textures/nxp.png</albedo_map>
-            </metal>
-          </pbr>
-        </material>
-      </visual>
-      <visual name="RDDRONE_FMUK66_TOP">
-        <pose>-.03 0 .0515 0 0 -1.57</pose>
-        <cast_shadows>false</cast_shadows>
-        <geometry>
-          <plane>
-            <normal>0 0 1</normal>
-            <size>.032 .0034</size>
-          </plane>
-        </geometry>
-        <material>
-          <diffuse>1.0 1.0 1.0</diffuse>
-          <specular>1.0 1.0 1.0</specular>
-          <pbr>
-            <metal>
-              <albedo_map>model://x500-Base/materials/textures/rd.png</albedo_map>
-            </metal>
-          </pbr>
-        </material>
-      </visual>
-      <collision name="base_link_collision_0">
-        <pose>0 0 .007 0 0 0</pose>
-        <geometry>
-          <box>
-            <size>0.35355339059327373 0.35355339059327373 0.05</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-      <collision name="base_link_collision_1">
-        <pose>0 -0.098 -.123 -0.35 0 0</pose>
-        <geometry>
-          <box>
-            <size>0.015 0.015 0.21</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-      <collision name="base_link_collision_2">
-        <pose>0 0.098 -.123 0.35 0 0</pose>
-        <geometry>
-          <box>
-            <size>0.015 0.015 0.21</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-      <collision name="base_link_collision_3">
-        <pose>0 -0.132 -.2195 0 0 0</pose>
-        <geometry>
-          <box>
-            <size>0.25 0.015 0.015</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-      <collision name="base_link_collision_4">
-        <pose>0 0.132 -.2195 0 0 0</pose>
-        <geometry>
-          <box>
-            <size>0.25 0.015 0.015</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-      <sensor name="imu_sensor" type="imu">
-        <always_on>1</always_on>
-        <update_rate>250</update_rate>
-      </sensor>
-    </link>
-    <link name="rotor_0">
-      <gravity>true</gravity>
-      <self_collide>false</self_collide>
-      <velocity_decay/>
-      <pose>0.174 -0.174 0.06 0 0 0</pose>
-      <inertial>
-          <mass>0.016076923076923075</mass>
-          <inertia>
-            <ixx>3.8464910483993325e-07</ixx>
-            <iyy>2.6115851691700804e-05</iyy>
-            <izz>2.649858234714004e-05</izz>
-          </inertia>
-        </inertial>
-      <visual name="rotor_0_visual">
-        <pose>-0.022 -0.14638461538461536 -0.016 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>0.8461538461538461 0.8461538461538461 0.8461538461538461</scale>
-            <uri>model://x500-Base/meshes/1345_prop_ccw.stl</uri>
-          </mesh>
-        </geometry>
-        <material>
-          <script>
-            <name>Gazebo/DarkGrey</name>
-            <uri>file://media/materials/scripts/gazebo.material</uri>
-          </script>
-        </material>
-      </visual>
-      <visual name="rotor_0_visual_motor_bell">
-        <pose>0 0 -.032 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Bell.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <collision name="rotor_0_collision">
-        <pose>0 0 0 0 0 0 </pose>
-        <geometry>
-          <box>
-            <size>0.2792307692307692 0.016923076923076923 0.0008461538461538462</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-    </link>
-    <joint name="rotor_0_joint" type="revolute">
-      <parent>base_link</parent>
-      <child>rotor_0</child>
-      <axis>
-        <xyz>0 0 1</xyz>
-        <limit>
-          <lower>-1e+16</lower>
-          <upper>1e+16</upper>
-        </limit>
-        <dynamics>
-          <spring_reference>0</spring_reference>
-          <spring_stiffness>0</spring_stiffness>
-        </dynamics>
-        <use_parent_model_frame>1</use_parent_model_frame>
-      </axis>
-    </joint>
-    <link name="rotor_1">
-      <gravity>true</gravity>
-      <self_collide>false</self_collide>
-      <velocity_decay/>
-      <pose>-0.174 0.174 0.06 0 0 0</pose>
-      <inertial>
-          <mass>0.016076923076923075</mass>
-          <inertia>
-            <ixx>3.8464910483993325e-07</ixx>
-            <iyy>2.6115851691700804e-05</iyy>
-            <izz>2.649858234714004e-05</izz>
-          </inertia>
-        </inertial>
-      <visual name="rotor_1_visual">
-        <pose>-0.022 -0.14638461538461536 -0.016 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>0.8461538461538461 0.8461538461538461 0.8461538461538461</scale>
-            <uri>model://x500-Base/meshes/1345_prop_ccw.stl</uri>
-          </mesh>
-        </geometry>
-        <material>
-          <script>
-            <name>Gazebo/DarkGrey</name>
-            <uri>file://media/materials/scripts/gazebo.material</uri>
-          </script>
-        </material>
-      </visual>
-      <visual name="rotor_1_visual_motor_top">
-        <pose>0 0 -.032 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Bell.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <collision name="rotor_1_collision">
-        <pose>0 0 0 0 0 0 </pose>
-        <geometry>
-          <box>
-            <size>0.2792307692307692 0.016923076923076923 0.0008461538461538462</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-    </link>
-    <joint name="rotor_1_joint" type="revolute">
-      <parent>base_link</parent>
-      <child>rotor_1</child>
-      <axis>
-        <xyz>0 0 1</xyz>
-        <limit>
-          <lower>-1e+16</lower>
-          <upper>1e+16</upper>
-        </limit>
-        <dynamics>
-          <spring_reference>0</spring_reference>
-          <spring_stiffness>0</spring_stiffness>
-        </dynamics>
-        <use_parent_model_frame>1</use_parent_model_frame>
-      </axis>
-    </joint>
-    <link name="rotor_2">
-      <gravity>true</gravity>
-      <self_collide>false</self_collide>
-      <velocity_decay/>
-      <pose>0.174 0.174 0.06 0 0 0</pose>
-      <inertial>
-          <mass>0.016076923076923075</mass>
-          <inertia>
-            <ixx>3.8464910483993325e-07</ixx>
-            <iyy>2.6115851691700804e-05</iyy>
-            <izz>2.649858234714004e-05</izz>
-          </inertia>
-        </inertial>
-      <visual name="rotor_2_visual">
-        <pose>-0.022 -0.14638461538461536 -0.016 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>0.8461538461538461 0.8461538461538461 0.8461538461538461</scale>
-            <uri>model://x500-Base/meshes/1345_prop_cw.stl</uri>
-          </mesh>
-        </geometry>
-        <material>
-          <script>
-            <name>Gazebo/DarkGrey</name>
-            <uri>file://media/materials/scripts/gazebo.material</uri>
-          </script>
-        </material>
-      </visual>
-      <visual name="rotor_2_visual_motor_top">
-        <pose>0 0 -.032 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Bell.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <collision name="rotor_2_collision">
-        <pose>0 0 0 0 0 0 </pose>
-        <geometry>
-          <box>
-            <size>0.2792307692307692 0.016923076923076923 0.0008461538461538462</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-    </link>
-    <joint name="rotor_2_joint" type="revolute">
-      <parent>base_link</parent>
-      <child>rotor_2</child>
-      <axis>
-        <xyz>0 0 1</xyz>
-        <limit>
-          <lower>-1e+16</lower>
-          <upper>1e+16</upper>
-        </limit>
-        <dynamics>
-          <spring_reference>0</spring_reference>
-          <spring_stiffness>0</spring_stiffness>
-        </dynamics>
-        <use_parent_model_frame>1</use_parent_model_frame>
-      </axis>
-    </joint>
-    <link name="rotor_3">
-      <gravity>true</gravity>
-      <self_collide>false</self_collide>
-      <velocity_decay/>
-      <pose>-0.174 -0.174 0.06 0 0 0</pose>
-      <inertial>
-          <mass>0.016076923076923075</mass>
-          <inertia>
-            <ixx>3.8464910483993325e-07</ixx>
-            <iyy>2.6115851691700804e-05</iyy>
-            <izz>2.649858234714004e-05</izz>
-          </inertia>
-        </inertial>
-      <visual name="rotor_3_visual">
-        <pose>-0.022 -0.14638461538461536 -0.016 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>0.8461538461538461 0.8461538461538461 0.8461538461538461</scale>
-            <uri>model://x500-Base/meshes/1345_prop_cw.stl</uri>
-          </mesh>
-        </geometry>
-        <material>
-          <script>
-            <name>Gazebo/DarkGrey</name>
-            <uri>file://media/materials/scripts/gazebo.material</uri>
-          </script>
-        </material>
-      </visual>
-      <visual name="rotor_3_visual_motor_top">
-        <pose>0 0 -.032 0 0 0</pose>
-        <geometry>
-          <mesh>
-            <scale>1 1 1</scale>
-            <uri>model://x500-Base/meshes/5010Bell.dae</uri>
-          </mesh>
-        </geometry>
-      </visual>
-      <collision name="rotor_3_collision">
-        <pose>0 0 0 0 0 0 </pose>
-        <geometry>
-          <box>
-            <size>0.2792307692307692 0.016923076923076923 0.0008461538461538462</size>
-          </box>
-        </geometry>
-        <surface>
-          <contact>
-            <ode>
-              <min_depth>0.001</min_depth>
-              <max_vel>0</max_vel>
-            </ode>
-          </contact>
-          <friction>
-            <ode/>
-          </friction>
-        </surface>
-      </collision>
-    </link>
-    <joint name="rotor_3_joint" type="revolute">
-      <parent>base_link</parent>
-      <child>rotor_3</child>
-      <axis>
-        <xyz>0 0 1</xyz>
-        <limit>
-          <lower>-1e+16</lower>
-          <upper>1e+16</upper>
-        </limit>
-        <dynamics>
-          <spring_reference>0</spring_reference>
-          <spring_stiffness>0</spring_stiffness>
-        </dynamics>
-        <use_parent_model_frame>1</use_parent_model_frame>
-      </axis>
-    </joint>
-  </model>
-</sdf>

Tools/simulation/ignition/models/x500-Depth/model.sdf

@@ -1,85 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<sdf version='1.9'>
-  <model name='x500-Depth'>
-    <include merge='true'>
-      <uri>model://x500-Base</uri>
-    </include>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500-Depth</robotNamespace>
-      <jointName>rotor_0_joint</jointName>
-      <linkName>rotor_0</linkName>
-      <turningDirection>ccw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>0</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500-Depth</robotNamespace>
-      <jointName>rotor_1_joint</jointName>
-      <linkName>rotor_1</linkName>
-      <turningDirection>ccw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>1</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500-Depth</robotNamespace>
-      <jointName>rotor_2_joint</jointName>
-      <linkName>rotor_2</linkName>
-      <turningDirection>cw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>2</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500-Depth</robotNamespace>
-      <jointName>rotor_3_joint</jointName>
-      <linkName>rotor_3</linkName>
-      <turningDirection>cw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>3</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <include merge='true'>
-      <uri>https://fuel.gazebosim.org/1.0/RudisLaboratories/models/OakD-Lite</uri>
-      <pose>.12 .03 .242 0 0 0</pose>
-    </include>
-    <joint name="CameraJoint" type="fixed">
-      <parent>base_link</parent>
-      <child>OakD-Lite/base_link</child>
-      <pose relative_to="base_link">.12 .03 .242 0 0 0</pose>
-    </joint>
-  </model>
-</sdf>

Tools/simulation/ignition/models/x500/model.sdf

@@ -1,76 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<sdf version='1.9'>
-  <model name='x500'>
-    <include merge='true'>
-      <uri>model://x500-Base</uri>
-    </include>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500</robotNamespace>
-      <jointName>rotor_0_joint</jointName>
-      <linkName>rotor_0</linkName>
-      <turningDirection>ccw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>0</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500</robotNamespace>
-      <jointName>rotor_1_joint</jointName>
-      <linkName>rotor_1</linkName>
-      <turningDirection>ccw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>1</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500</robotNamespace>
-      <jointName>rotor_2_joint</jointName>
-      <linkName>rotor_2</linkName>
-      <turningDirection>cw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>2</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-    <plugin filename="ignition-gazebo-multicopter-motor-model-system" name="ignition::gazebo::systems::MulticopterMotorModel">
-      <robotNamespace>model/x500</robotNamespace>
-      <jointName>rotor_3_joint</jointName>
-      <linkName>rotor_3</linkName>
-      <turningDirection>cw</turningDirection>
-      <timeConstantUp>0.0125</timeConstantUp>
-      <timeConstantDown>0.025</timeConstantDown>
-      <maxRotVelocity>1000.0</maxRotVelocity>
-      <motorConstant>8.54858e-06</motorConstant>
-      <momentConstant>0.016</momentConstant>
-      <commandSubTopic>command/motor_speed</commandSubTopic>
-      <motorNumber>3</motorNumber>
-      <rotorDragCoefficient>8.06428e-05</rotorDragCoefficient>
-      <rollingMomentCoefficient>1e-06</rollingMomentCoefficient>
-      <rotorVelocitySlowdownSim>10</rotorVelocitySlowdownSim>
-      <motorType>velocity</motorType>
-    </plugin>
-  </model>
-</sdf>

Tools/upload.sh

@@ -15,7 +15,7 @@ SERIAL_PORTS="/dev/tty.usbmodemPX*,/dev/tty.usbmodem*"
 fi
 
 if [ $SYSTYPE = "Linux" ]; then
-SERIAL_PORTS="/dev/serial/by-id/*_PX4_*,/dev/serial/by-id/usb-3D_Robotics*,/dev/serial/by-id/usb-The_Autopilot*,/dev/serial/by-id/usb-Bitcraze*,/dev/serial/by-id/pci-Bitcraze*,/dev/serial/by-id/usb-Gumstix*,/dev/serial/by-id/usb-UVify*,/dev/serial/by-id/usb-ArduPilot*,"
+SERIAL_PORTS="/dev/serial/by-id/*_PX4_*,/dev/serial/by-id/usb-3D_Robotics*,/dev/serial/by-id/usb-The_Autopilot*,/dev/serial/by-id/usb-Bitcraze*,/dev/serial/by-id/pci-Bitcraze*,/dev/serial/by-id/usb-Gumstix*,/dev/serial/by-id/usb-UVify*,/dev/serial/by-id/usb-ArduPilot*,/dev/serial/by-id/ARK*,"
 fi
 
 if [[ $SYSTYPE = *"CYGWIN"* ]]; then

boards/ark/can-flow/default.px4board

@@ -8,6 +8,8 @@ CONFIG_DRIVERS_BOOTLOADERS=y
 CONFIG_DRIVERS_DISTANCE_SENSOR_BROADCOM_AFBRS50=y
 CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
 CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
+CONFIG_DRIVERS_OPTICAL_FLOW_PAA3905=y
 CONFIG_DRIVERS_OPTICAL_FLOW_PAW3902=y
 CONFIG_BOARD_UAVCAN_INTERFACES=1
 CONFIG_DRIVERS_UAVCANNODE=y

boards/ark/can-flow/init/rc.board_sensors

@@ -6,12 +6,18 @@
 param set-default IMU_GYRO_RATEMAX 1000
 
 # Internal SPI
-paw3902 -s start -Y 180
+if ! paw3902 -s start -Y 180
+then
+	paa3905 -s start -Y 180
+fi
 
 if ! icm42688p -R 0 -s start
 then
-	bmi088 -A -s -R 4 start
-	bmi088 -G -s -R 4 start
+	if ! iim42652 -R 0 -s start
+	then
+		bmi088 -A -s -R 4 start
+		bmi088 -G -s -R 4 start
+	fi
 fi
 
 afbrs50 start

boards/ark/can-flow/src/spi.cpp

@@ -40,7 +40,9 @@ constexpr px4_spi_bus_t px4_spi_buses[SPI_BUS_MAX_BUS_ITEMS] = {
 		initSPIDevice(DRV_GYR_DEVTYPE_BMI088, SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
 		initSPIDevice(DRV_ACC_DEVTYPE_BMI088, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin0}),
 		initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin0}),
+		initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortA, GPIO::Pin4}, SPI::DRDY{GPIO::PortB, GPIO::Pin0}),
 		initSPIDevice(DRV_FLOW_DEVTYPE_PAW3902, SPI::CS{GPIO::PortB, GPIO::Pin5}, SPI::DRDY{GPIO::PortB, GPIO::Pin2}),
+		initSPIDevice(DRV_FLOW_DEVTYPE_PAA3905, SPI::CS{GPIO::PortB, GPIO::Pin5}, SPI::DRDY{GPIO::PortB, GPIO::Pin2}),
 	}),
 	initSPIBus(SPI::Bus::SPI2, {
 		initSPIDevice(DRV_DEVTYPE_UNUSED, SPI::CS{GPIO::PortB, GPIO::Pin12}, SPI::DRDY{GPIO::PortB, GPIO::Pin4}),

boards/ark/fmu-v6x/bootloader.px4board

@@ -0,0 +1,3 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ROMFSROOT=""

boards/ark/fmu-v6x/default.px4board

@@ -0,0 +1,89 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m7"
+CONFIG_BOARD_ETHERNET=y
+CONFIG_BOARD_SERIAL_GPS1="/dev/ttyS0"
+CONFIG_BOARD_SERIAL_GPS2="/dev/ttyS7"
+CONFIG_BOARD_SERIAL_TEL1="/dev/ttyS6"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS4"
+CONFIG_BOARD_SERIAL_TEL3="/dev/ttyS1"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_BMP388=y
+CONFIG_DRIVERS_BAROMETER_MS5611=y
+CONFIG_DRIVERS_BATT_SMBUS=y
+CONFIG_DRIVERS_CAMERA_CAPTURE=y
+CONFIG_DRIVERS_CAMERA_TRIGGER=y
+CONFIG_COMMON_DIFFERENTIAL_PRESSURE=y
+CONFIG_COMMON_DISTANCE_SENSOR=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_HEATER=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM42688P=y
+CONFIG_DRIVERS_IMU_INVENSENSE_IIM42652=y
+CONFIG_COMMON_LIGHT=y
+CONFIG_COMMON_MAGNETOMETER=y
+CONFIG_COMMON_OPTICAL_FLOW=y
+CONFIG_DRIVERS_POWER_MONITOR_INA226=y
+CONFIG_DRIVERS_POWER_MONITOR_INA228=y
+CONFIG_DRIVERS_POWER_MONITOR_INA238=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_PX4IO=y
+CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_SAFETY_BUTTON=y
+CONFIG_DRIVERS_TONE_ALARM=y
+CONFIG_DRIVERS_UAVCAN=y
+CONFIG_BOARD_UAVCAN_TIMER_OVERRIDE=2
+CONFIG_MODULES_AIRSPEED_SELECTOR=y
+CONFIG_MODULES_CAMERA_FEEDBACK=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_ESC_BATTERY=y
+CONFIG_MODULES_EVENTS=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_FW_ATT_CONTROL=y
+CONFIG_MODULES_FW_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_FW_POS_CONTROL_L1=y
+CONFIG_MODULES_GIMBAL=y
+CONFIG_MODULES_GYRO_CALIBRATION=y
+CONFIG_MODULES_GYRO_FFT=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LANDING_TARGET_ESTIMATOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_LOGGER=y
+CONFIG_MODULES_MAG_BIAS_ESTIMATOR=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_AUTOTUNE_ATTITUDE_CONTROL=y
+CONFIG_MODULES_MC_HOVER_THRUST_ESTIMATOR=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_ROVER_POS_CONTROL=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_MODULES_SIMULATION_PWM_OUT_SIM=y
+CONFIG_MODULES_SIMULATION_SIMULATOR_SIH=y
+CONFIG_MODULES_TEMPERATURE_COMPENSATION=y
+CONFIG_MODULES_VTOL_ATT_CONTROL=y
+CONFIG_SYSTEMCMDS_ACTUATOR_TEST=y
+CONFIG_SYSTEMCMDS_BL_UPDATE=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_LED_CONTROL=y
+CONFIG_SYSTEMCMDS_MFT=y
+CONFIG_SYSTEMCMDS_MTD=y
+CONFIG_SYSTEMCMDS_NETMAN=y
+CONFIG_SYSTEMCMDS_NSHTERM=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_PERF=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_SYSTEM_TIME=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_TUNE_CONTROL=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_VER=y
+CONFIG_SYSTEMCMDS_WORK_QUEUE=y

boards/ark/fmu-v6x/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 57,
+    "magic": "ARKFWv1",
+    "description": "Firmware for the ARKFMUv6X board",
+    "image": "",
+    "build_time": 0,
+    "summary": "ARKFMUv6X",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1966080,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/ark/fmu-v6x/init/rc.board_defaults

@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# board specific defaults
+#------------------------------------------------------------------------------
+
+# Mavlink ethernet (CFG 1000)
+param set-default MAV_2_CONFIG 1000
+param set-default MAV_2_BROADCAST 1
+param set-default MAV_2_MODE 0
+param set-default MAV_2_RADIO_CTL 0
+param set-default MAV_2_RATE 100000
+param set-default MAV_2_REMOTE_PRT 14550
+param set-default MAV_2_UDP_PRT 14550
+
+param set-default SENS_EN_INA238 0
+param set-default SENS_EN_INA228 0
+param set-default SENS_EN_INA226 1
+
+param set-default SYS_USE_IO 1
+
+safety_button start

boards/ark/fmu-v6x/init/rc.board_sensors

@@ -0,0 +1,71 @@
+#!/bin/sh
+#
+# ARK FMUARKV6X specific board sensors init
+#------------------------------------------------------------------------------
+set HAVE_PM2 yes
+
+if ver hwtypecmp ARKV6X005000 ARKV6X005001 ARKV6X005002 ARKV6X005003 ARKV6X005004
+then
+	set HAVE_PM2 no
+fi
+if param compare -s ADC_ADS1115_EN 1
+then
+	ads1115 start -X
+else
+	board_adc start
+fi
+
+
+if param compare SENS_EN_INA226 1
+then
+	# Start Digital power monitors
+	ina226 -X -b 1 -t 1 -k start
+
+	if [ $HAVE_PM2 = yes ]
+	then
+		ina226 -X -b 2 -t 2 -k start
+	fi
+fi
+
+if param compare SENS_EN_INA228 1
+then
+	# Start Digital power monitors
+	ina228 -X -b 1 -t 1 -k start
+	if [ $HAVE_PM2 = yes ]
+	then
+		ina228 -X -b 2 -t 2 -k start
+	fi
+fi
+
+if param compare SENS_EN_INA238 1
+then
+	# Start Digital power monitors
+	ina238 -X -b 1 -t 1 -k start
+	if [ $HAVE_PM2 = yes ]
+	then
+		ina238 -X -b 2 -t 2 -k start
+	fi
+fi
+
+# Internal SPI bus IIM42652
+iim42652 -R 3 -s -b 1 start
+
+# Internal SPI bus ICM42688p
+icm42688p -R 9 -s -b 2 start
+
+# Internal SPI bus ICM42688p
+icm42688p -R 6 -s -b 3 start
+
+# Internal magnetometer on I2c
+bmm150 -I start
+
+# External compass on GPS1/I2C1 (the 3rd external bus): standard Holybro Pixhawk 4 or CUAV V5 GPS/compass puck (with lights, safety button, and buzzer)
+ist8310 -X -b 1 -R 10 start
+
+# Possible internal Baro
+bmp388 -I start
+
+# Baro on I2C3
+ms5611 -X start
+
+unset HAVE_PM2

boards/ark/fmu-v6x/nuttx-config/Kconfig

@@ -0,0 +1,17 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+config BOARD_HAS_PROBES
+	bool "Board provides GPIO or other Hardware for signaling to timing analyze."
+	default y
+	---help---
+		This board provides GPIO FMU-CH1-5, CAP1-6 as PROBE_1-11 to provide timing signals from selected drivers.
+
+config BOARD_USE_PROBES
+	bool "Enable the use the board provided FMU-CH1-5, CAP1-6 as PROBE_1-11"
+	default n
+	depends on BOARD_HAS_PROBES
+
+	---help---
+		Select to use GPIO FMU-CH1-5, CAP1-6  to provide timing signals from selected drivers.

boards/ark/fmu-v6x/nuttx-config/bootloader/defconfig

@@ -0,0 +1,96 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_SPI_EXCHANGE is not set
+# CONFIG_STM32H7_SYSCFG is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/fmu-v6x/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="ark"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H753II=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_INITTHREAD_PRIORITY=254
+CONFIG_BOARD_LATE_INITIALIZE=y
+CONFIG_BOARD_LOOPSPERMSEC=95150
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0039
+CONFIG_CDCACM_PRODUCTSTR="ARK BL FMU v6X.x"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3185
+CONFIG_CDCACM_VENDORSTR="ARK"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_PTHREAD=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FDCLONE_DISABLE=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_LIB_BOARDCTL=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SPI=y
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_UART7=y
+CONFIG_SYSTEMTICK_HOOK=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_TTY_SIGINT=y
+CONFIG_TTY_SIGINT_CHAR=0x03
+CONFIG_TTY_SIGTSTP=y
+CONFIG_UART7_RXBUFSIZE=512
+CONFIG_UART7_RXDMA=y
+CONFIG_UART7_TXBUFSIZE=512
+CONFIG_UART7_TXDMA=y
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="bootloader_main"

boards/ark/fmu-v6x/nuttx-config/include/board.h

@@ -0,0 +1,558 @@
+/************************************************************************************
+ * nuttx-configs/px4_fmu-v6x/include/board.h
+ *
+ *   Copyright (C) 2016-2022 Gregory Nutt. All rights reserved.
+ *   Authors: David Sidrane <david.sidrane@nscdg.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+#ifndef __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H
+#define __NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdmmc.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The px4_fmu-v6X  board provides the following clock sources:
+ *
+ *   X1: 16 MHz crystal for HSE
+ *
+ * So we have these clock source available within the STM32
+ *
+ *   HSI: 16 MHz RC factory-trimmed
+ *   HSE: 16 MHz crystal for HSE
+ */
+
+#define STM32_BOARD_XTAL        16000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE = 16,000,000
+ *
+ * PLL_VCOx = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ * Subject to:
+ *
+ *     1 <= PLLM <= 63
+ *     4 <= PLLN <= 512
+ *   150 MHz <= PLL_VCOL <= 420MHz
+ *   192 MHz <= PLL_VCOH <= 836MHz
+ *
+ * SYSCLK  = PLL_VCO / PLLP
+ * CPUCLK  = SYSCLK / D1CPRE
+ * Subject to
+ *
+ *   PLLP1   = {2, 4, 6, 8, ..., 128}
+ *   PLLP2,3 = {2, 3, 4, ..., 128}
+ *   CPUCLK <= 480 MHz
+ */
+
+#define STM32_BOARD_USEHSE
+
+#define STM32_PLLCFG_PLLSRC      RCC_PLLCKSELR_PLLSRC_HSE
+
+/* PLL1, wide 4 - 8 MHz input, enable DIVP, DIVQ, DIVR
+ *
+ *   PLL1_VCO = (16,000,000 / 1) * 60 = 960 MHz
+ *
+ *   PLL1P = PLL1_VCO/2  = 960 MHz / 2   = 480 MHz
+ *   PLL1Q = PLL1_VCO/4  = 960 MHz / 4   = 240 MHz
+ *   PLL1R = PLL1_VCO/8  = 960 MHz / 8   = 120 MHz
+ */
+
+#define STM32_PLLCFG_PLL1CFG    (RCC_PLLCFGR_PLL1VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL1RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVP1EN | \
+				 RCC_PLLCFGR_DIVQ1EN | \
+				 RCC_PLLCFGR_DIVR1EN)
+#define STM32_PLLCFG_PLL1M       RCC_PLLCKSELR_DIVM1(1)
+#define STM32_PLLCFG_PLL1N       RCC_PLL1DIVR_N1(60)
+#define STM32_PLLCFG_PLL1P       RCC_PLL1DIVR_P1(2)
+#define STM32_PLLCFG_PLL1Q       RCC_PLL1DIVR_Q1(4)
+#define STM32_PLLCFG_PLL1R       RCC_PLL1DIVR_R1(8)
+
+#define STM32_VCO1_FREQUENCY     ((STM32_HSE_FREQUENCY / 1) * 60)
+#define STM32_PLL1P_FREQUENCY    (STM32_VCO1_FREQUENCY / 2)
+#define STM32_PLL1Q_FREQUENCY    (STM32_VCO1_FREQUENCY / 4)
+#define STM32_PLL1R_FREQUENCY    (STM32_VCO1_FREQUENCY / 8)
+
+/* PLL2 */
+
+#define STM32_PLLCFG_PLL2CFG     (RCC_PLLCFGR_PLL2VCOSEL_WIDE | \
+				  RCC_PLLCFGR_PLL2RGE_4_8_MHZ | \
+				  RCC_PLLCFGR_DIVP2EN | \
+				  RCC_PLLCFGR_DIVQ2EN | \
+				  RCC_PLLCFGR_DIVR2EN)
+#define STM32_PLLCFG_PLL2M       RCC_PLLCKSELR_DIVM2(4)
+#define STM32_PLLCFG_PLL2N       RCC_PLL2DIVR_N2(48)
+#define STM32_PLLCFG_PLL2P       RCC_PLL2DIVR_P2(2)
+#define STM32_PLLCFG_PLL2Q       RCC_PLL2DIVR_Q2(2)
+#define STM32_PLLCFG_PLL2R       RCC_PLL2DIVR_R2(2)
+
+#define STM32_VCO2_FREQUENCY     ((STM32_HSE_FREQUENCY / 4) * 48)
+#define STM32_PLL2P_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2Q_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+#define STM32_PLL2R_FREQUENCY    (STM32_VCO2_FREQUENCY / 2)
+
+/* PLL3 */
+
+#define STM32_PLLCFG_PLL3CFG    (RCC_PLLCFGR_PLL3VCOSEL_WIDE | \
+				 RCC_PLLCFGR_PLL3RGE_4_8_MHZ | \
+				 RCC_PLLCFGR_DIVQ3EN)
+#define STM32_PLLCFG_PLL3M      RCC_PLLCKSELR_DIVM3(4)
+#define STM32_PLLCFG_PLL3N      RCC_PLL3DIVR_N3(48)
+#define STM32_PLLCFG_PLL3P      RCC_PLL3DIVR_P3(2)
+#define STM32_PLLCFG_PLL3Q      RCC_PLL3DIVR_Q3(4)
+#define STM32_PLLCFG_PLL3R      RCC_PLL3DIVR_R3(2)
+
+#define STM32_VCO3_FREQUENCY    ((STM32_HSE_FREQUENCY / 4) * 48)
+#define STM32_PLL3P_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+#define STM32_PLL3Q_FREQUENCY   (STM32_VCO3_FREQUENCY / 4)
+#define STM32_PLL3R_FREQUENCY   (STM32_VCO3_FREQUENCY / 2)
+
+/* SYSCLK = PLL1P = 480MHz
+ * CPUCLK = SYSCLK / 1 = 480 MHz
+ */
+
+#define STM32_RCC_D1CFGR_D1CPRE  (RCC_D1CFGR_D1CPRE_SYSCLK)
+#define STM32_SYSCLK_FREQUENCY   (STM32_PLL1P_FREQUENCY)
+#define STM32_CPUCLK_FREQUENCY   (STM32_SYSCLK_FREQUENCY / 1)
+
+/* Configure Clock Assignments */
+
+/* AHB clock (HCLK) is SYSCLK/2 (240 MHz max)
+ * HCLK1 = HCLK2 = HCLK3 = HCLK4 = 240
+ */
+
+#define STM32_RCC_D1CFGR_HPRE   RCC_D1CFGR_HPRE_SYSCLKd2        /* HCLK  = SYSCLK / 2 */
+#define STM32_ACLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* ACLK in D1, HCLK3 in D1 */
+#define STM32_HCLK_FREQUENCY    (STM32_CPUCLK_FREQUENCY / 2)    /* HCLK in D2, HCLK4 in D3 */
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY            /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE1  RCC_D2CFGR_D2PPRE1_HCLKd2       /* PCLK1 = HCLK / 2 */
+#define STM32_PCLK1_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB2 clock (PCLK2) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D2CFGR_D2PPRE2  RCC_D2CFGR_D2PPRE2_HCLKd2       /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB3 clock (PCLK3) is HCLK/2 (120 MHz) */
+
+#define STM32_RCC_D1CFGR_D1PPRE   RCC_D1CFGR_D1PPRE_HCLKd2        /* PCLK3 = HCLK / 2 */
+#define STM32_PCLK3_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* APB4 clock (PCLK4) is HCLK/4 (120 MHz) */
+
+#define STM32_RCC_D3CFGR_D3PPRE   RCC_D3CFGR_D3PPRE_HCLKd2       /* PCLK4 = HCLK / 2 */
+#define STM32_PCLK4_FREQUENCY     (STM32_HCLK_FREQUENCY/2)
+
+/* Timer clock frequencies */
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM15_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM16_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM17_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Kernel Clock Configuration
+ *
+ * Note: look at Table 54 in ST Manual
+ */
+
+/* I2C123 clock source */
+
+#define STM32_RCC_D2CCIP2R_I2C123SRC RCC_D2CCIP2R_I2C123SEL_HSI
+
+/* I2C4 clock source */
+
+#define STM32_RCC_D3CCIPR_I2C4SRC    RCC_D3CCIPR_I2C4SEL_HSI
+
+/* SPI123 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI123SRC RCC_D2CCIP1R_SPI123SEL_PLL2
+
+/* SPI45 clock source */
+
+#define STM32_RCC_D2CCIP1R_SPI45SRC  RCC_D2CCIP1R_SPI45SEL_PLL2
+
+/* SPI6 clock source */
+
+#define STM32_RCC_D3CCIPR_SPI6SRC    RCC_D3CCIPR_SPI6SEL_PLL2
+
+/* USB 1 and 2 clock source */
+
+#define STM32_RCC_D2CCIP2R_USBSRC    RCC_D2CCIP2R_USBSEL_PLL3
+
+/* ADC 1 2 3 clock source */
+
+#define STM32_RCC_D3CCIPR_ADCSEL     RCC_D3CCIPR_ADCSEL_PLL2
+
+/* FDCAN 1 2 clock source */
+
+#define STM32_RCC_D2CCIP1R_FDCANSEL  RCC_D2CCIP1R_FDCANSEL_HSE   /* FDCAN 1 2 clock source */
+
+#define STM32_FDCANCLK               STM32_HSE_FREQUENCY
+
+/* FLASH wait states
+ *
+ *  ------------ ---------- -----------
+ *  Vcore        MAX ACLK   WAIT STATES
+ *  ------------ ---------- -----------
+ *  1.15-1.26 V     70 MHz    0
+ *  (VOS1 level)   140 MHz    1
+ *                 210 MHz    2
+ *  1.05-1.15 V     55 MHz    0
+ *  (VOS2 level)   110 MHz    1
+ *                 165 MHz    2
+ *                 220 MHz    3
+ *  0.95-1.05 V     45 MHz    0
+ *  (VOS3 level)    90 MHz    1
+ *                 135 MHz    2
+ *                 180 MHz    3
+ *                 225 MHz    4
+ *  ------------ ---------- -----------
+ */
+
+#define BOARD_FLASH_WAITSTATES 2
+
+/* SDMMC definitions ********************************************************/
+
+/* Init 400kHz, freq = PLL1Q/(2*div)  div =  PLL1Q/(2*freq) */
+
+#define STM32_SDMMC_INIT_CLKDIV     (300 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+
+/* 25 MHz Max for now, 25 mHZ = PLL1Q/(2*div), div =  PLL1Q/(2*freq)
+ * div = 4.8 = 240 / 50, So round up to 5 for default speed 24 MB/s
+ */
+
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_MMCXFR_CLKDIV   (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+#if defined(CONFIG_STM32H7_SDMMC_XDMA) || defined(CONFIG_STM32H7_SDMMC_IDMA)
+#  define STM32_SDMMC_SDXFR_CLKDIV    (5 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#else
+#  define STM32_SDMMC_SDXFR_CLKDIV    (100 << STM32_SDMMC_CLKCR_CLKDIV_SHIFT)
+#endif
+
+#define STM32_SDMMC_CLKCR_EDGE      STM32_SDMMC_CLKCR_NEGEDGE
+
+/* LED definitions ******************************************************************/
+/* The ARKV6X board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+/* LED definitions ******************************************************************/
+/* The px4_fmu-v6x board has three, LED_GREEN a Green LED, LED_BLUE a Blue LED and
+ * LED_RED a Red LED, that can be controlled by software.
+ *
+ * If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any way.
+ * The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with board_userled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_LED3        2
+#define BOARD_NLEDS       3
+
+#define BOARD_LED_RED     BOARD_LED1
+#define BOARD_LED_GREEN   BOARD_LED2
+#define BOARD_LED_BLUE    BOARD_LED3
+
+/* LED bits for use with board_userled_all() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)
+
+/* If CONFIG_ARCH_LEDS is defined, the usage by the board port is defined in
+ * include/board.h and src/stm32_leds.c. The LEDs are used to encode OS-related
+ * events as follows:
+ *
+ *
+ *   SYMBOL                     Meaning                      LED state
+ *                                                        Red   Green Blue
+ *   ----------------------  --------------------------  ------ ------ ----*/
+
+#define LED_STARTED        0 /* NuttX has been started   OFF    OFF   OFF  */
+#define LED_HEAPALLOCATE   1 /* Heap has been allocated  OFF    OFF   ON   */
+#define LED_IRQSENABLED    2 /* Interrupts enabled       OFF    ON    OFF  */
+#define LED_STACKCREATED   3 /* Idle stack created       OFF    ON    ON   */
+#define LED_INIRQ          4 /* In an interrupt          N/C    N/C   GLOW */
+#define LED_SIGNAL         5 /* In a signal handler      N/C    GLOW  N/C  */
+#define LED_ASSERTION      6 /* An assertion failed      GLOW   N/C   GLOW */
+#define LED_PANIC          7 /* The system has crashed   Blink  OFF   N/C  */
+#define LED_IDLE           8 /* MCU is is sleep mode     ON     OFF   OFF  */
+
+/* Thus if the Green LED is statically on, NuttX has successfully booted and
+ * is, apparently, running normally.  If the Red LED is flashing at
+ * approximately 2Hz, then a fatal error has been detected and the system
+ * has halted.
+ */
+
+/* Alternate function pin selections ************************************************/
+
+#define GPIO_USART1_RX   GPIO_USART1_RX_3      /* PB7 */
+#define GPIO_USART1_TX   GPIO_USART1_TX_3      /* PB6 */
+
+#define GPIO_USART2_RX   GPIO_USART2_RX_1       /* PA3   */
+#define GPIO_USART2_TX   GPIO_USART2_TX_2       /* PD5   */
+#define GPIO_USART2_RTS  GPIO_USART2_RTS_2      /* PD4   */
+#define GPIO_USART2_CTS  GPIO_USART2_CTS_NSS_2  /* PD3   */
+
+#define GPIO_USART3_RX   GPIO_USART3_RX_3   /* PD9   */
+#define GPIO_USART3_TX   GPIO_USART3_TX_3   /* PD8   */
+
+#define GPIO_UART4_RX    GPIO_UART4_RX_6    /* PH14 */
+#define GPIO_UART4_TX    GPIO_UART4_TX_6    /* PH13 */
+
+#define GPIO_UART5_RX    GPIO_UART5_RX_3    /* PD2  */
+#define GPIO_UART5_TX    GPIO_UART5_TX_3    /* PC12 */
+// GPIO_UART5_RTS   no remap                /* PC8  */
+// GPIO_UART5_CTS  No remap                 /* PC9  */
+
+#define GPIO_USART6_RX   GPIO_USART6_RX_1   /* PC7 */
+#define GPIO_USART6_TX   GPIO_USART6_TX_1   /* PC6  */
+
+#define GPIO_UART7_RX    GPIO_UART7_RX_4    /* PF6  */
+#define GPIO_UART7_TX    GPIO_UART7_TX_3    /* PE8  */
+#define GPIO_UART7_RTS   GPIO_UART7_RTS_2   /* PF8  */
+#define GPIO_UART7_CTS   GPIO_UART7_CTS_1   /* PE10 */
+
+#define GPIO_UART8_RX    GPIO_UART8_RX_1    /* PE0 */
+#define GPIO_UART8_TX    GPIO_UART8_TX_1    /* PE1 */
+
+
+/* CAN
+ *
+ * CAN1 is routed to transceiver.
+ * CAN2 is routed to transceiver.
+ */
+#define GPIO_CAN1_RX     GPIO_CAN1_RX_3     /* PD0  */
+#define GPIO_CAN1_TX     GPIO_CAN1_TX_3     /* PD1  */
+#define GPIO_CAN2_RX     GPIO_CAN2_RX_1     /* PB12 */
+#define GPIO_CAN2_TX     GPIO_CAN2_TX_1     /* PB13  */
+
+/* SPI
+ * SPI1 is sensors1
+ * SPI2 is sensors2
+ * SPI3 is sensors3
+ * SPI4 is Not Used
+ * SPI5 is FRAM
+ * SPI6 is EXTERNAL1
+ *
+ */
+
+#define ADJ_SLEW_RATE(p) (((p) & ~GPIO_SPEED_MASK) | (GPIO_SPEED_2MHz))
+
+#define GPIO_SPI1_MISO   GPIO_SPI1_MISO_3               /* PG9  */
+#define GPIO_SPI1_MOSI   GPIO_SPI1_MOSI_2               /* PB5  */
+#define GPIO_SPI1_SCK    ADJ_SLEW_RATE(GPIO_SPI1_SCK_1) /* PA5  */
+
+#define GPIO_SPI2_MISO   GPIO_SPI2_MISO_3               /* PI2  */
+#define GPIO_SPI2_MOSI   GPIO_SPI2_MOSI_4               /* PI3  */
+#define GPIO_SPI2_SCK    ADJ_SLEW_RATE(GPIO_SPI2_SCK_6) /* PI1  */
+
+#define GPIO_SPI3_MISO   GPIO_SPI3_MISO_2               /* PC11 */
+#define GPIO_SPI3_MOSI   GPIO_SPI3_MOSI_3               /* PB2  */
+#define GPIO_SPI3_SCK    ADJ_SLEW_RATE(GPIO_SPI3_SCK_2) /* PC10 */
+
+#define GPIO_SPI5_MISO   GPIO_SPI5_MISO_2               /* PH7  */
+#define GPIO_SPI5_MOSI   GPIO_SPI5_MOSI_1               /* PF11 */
+#define GPIO_SPI5_SCK    ADJ_SLEW_RATE(GPIO_SPI5_SCK_1) /* PF7  */
+
+#define GPIO_SPI6_MISO   GPIO_SPI6_MISO_2               /* PA6  */
+#define GPIO_SPI6_MOSI   GPIO_SPI6_MOSI_1               /* PG14 */
+#define GPIO_SPI6_SCK    ADJ_SLEW_RATE(GPIO_SPI6_SCK_3) /* PB3  */
+
+/* I2C
+ *
+ *   The optional _GPIO configurations allow the I2C driver to manually
+ *   reset the bus to clear stuck slaves.  They match the pin configuration,
+ *   but are normally-high GPIOs.
+ *
+ */
+
+#define GPIO_I2C1_SCL GPIO_I2C1_SCL_2       /* PB8  */
+#define GPIO_I2C1_SDA GPIO_I2C1_SDA_2       /* PB9  */
+
+#define GPIO_I2C1_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN8)
+#define GPIO_I2C1_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN9)
+
+#define GPIO_I2C2_SCL GPIO_I2C2_SCL_2       /* PF1 */
+#define GPIO_I2C2_SDA GPIO_I2C2_SDA_2       /* PF0 */
+
+#define GPIO_I2C2_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN1)
+#define GPIO_I2C2_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN0)
+
+#define GPIO_I2C3_SCL GPIO_I2C3_SCL_1       /* PA8 */
+#define GPIO_I2C3_SDA GPIO_I2C3_SDA_2       /* PH8 */
+
+#define GPIO_I2C3_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTA | GPIO_PIN8)
+#define GPIO_I2C3_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN |GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTH | GPIO_PIN8)
+
+#define GPIO_I2C4_SCL GPIO_I2C4_SCL_2       /* PF14 */
+#define GPIO_I2C4_SDA GPIO_I2C4_SDA_2       /* PF15 */
+
+#define GPIO_I2C4_SCL_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN14)
+#define GPIO_I2C4_SDA_GPIO                  (GPIO_OUTPUT | GPIO_OPENDRAIN | GPIO_SPEED_50MHz | GPIO_OUTPUT_SET | GPIO_PORTF | GPIO_PIN15)
+
+/* SDMMC2
+ *
+ *      VDD 3.3
+ *      GND
+ *      SDMMC2_CK                           PD6
+ *      SDMMC2_CMD                          PD7
+ *      SDMMC2_D0                           PB14
+ *      SDMMC2_D1                           PB15
+ *      SDMMC2_D2                           PG11
+ *      SDMMC2_D3                           PB4
+ */
+
+#define GPIO_SDMMC2_CK   GPIO_SDMMC2_CK_1  /* PD6 */
+#define GPIO_SDMMC2_CMD  GPIO_SDMMC2_CMD_1 /* PD7 */
+//      GPIO_SDMMC2_D0   No Remap          /* PB14 */
+//      GPIO_SDMMC2_D1   No Remap          /* PB15 */
+#define GPIO_SDMMC2_D2   GPIO_SDMMC2_D2_1  /* PG11 */
+//      GPIO_SDMMC2_D3    No Remap         /* PB4 */
+
+/* The STM32 H7 connects to a TI DP83848TSQ/NOPB
+ * using RMII
+ *
+ *   STM32 H7 BOARD        DP83848TSQ/NOPB
+ *   GPIO     SIGNAL       PIN NAME
+ *   -------- ------------ -------------
+ *   PA7     ETH_CRS_DV    CRS_DV
+ *   PC1     ETH_MDC       MDC
+ *   PA2     ETH_MDIO      MDIO
+ *   PA1     ETH_REF_CL    X1
+ *   PC4     ETH_RXD0      RX_D0
+ *   PC5     ETH_RXD1      RX_D1
+ *   PB11    ETH_TX_EN     TX_EN
+ *   PG13    ETH_TXD0      TX_D0
+ *   PG12    ETH_TXD1      TX_D1
+ *
+ * The PHY address is 1, since COL/PHYAD0 features a pull up.
+ */
+
+#define GPIO_ETH_RMII_TX_EN	GPIO_ETH_RMII_TX_EN_1 /* PB11 */
+#define GPIO_ETH_RMII_TXD0	GPIO_ETH_RMII_TXD0_2  /* PG13 */
+#define GPIO_ETH_RMII_TXD1	GPIO_ETH_RMII_TXD1_2  /* PG12 */
+
+
+/* USB
+ *
+ *      OTG_FS_DM                           PA11
+ *      OTG_FS_DP                           PA12
+ *      VBUS                                PA9
+ */
+
+
+/* Board provides GPIO or other Hardware for signaling to timing analyzer */
+
+#if defined(CONFIG_BOARD_USE_PROBES)
+# include "stm32_gpio.h"
+# define PROBE_N(n) (1<<((n)-1))
+# define PROBE_1    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTI|GPIO_PIN0)   /* PI0 AUX1 */
+# define PROBE_2    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN12)  /* PH12 AUX2 */
+# define PROBE_3    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN11)  /* PH11 AUX3 */
+# define PROBE_4    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN10)  /* PH10 AUX4 */
+# define PROBE_5    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)  /* PD13 AUX5 */
+# define PROBE_6    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)  /* PD14 AUX6 */
+# define PROBE_7    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN6)   /* PH6  AUX7 */
+# define PROBE_8    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN9)   /* PH9  AUX8 */
+# define PROBE_9    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN11)  /* PE11  CAP1 */
+
+# define PROBE_INIT(mask) \
+	do { \
+		if ((mask)& PROBE_N(1)) { stm32_configgpio(PROBE_1); } \
+		if ((mask)& PROBE_N(2)) { stm32_configgpio(PROBE_2); } \
+		if ((mask)& PROBE_N(3)) { stm32_configgpio(PROBE_3); } \
+		if ((mask)& PROBE_N(4)) { stm32_configgpio(PROBE_4); } \
+		if ((mask)& PROBE_N(5)) { stm32_configgpio(PROBE_5); } \
+		if ((mask)& PROBE_N(6)) { stm32_configgpio(PROBE_6); } \
+		if ((mask)& PROBE_N(7)) { stm32_configgpio(PROBE_7); } \
+		if ((mask)& PROBE_N(8)) { stm32_configgpio(PROBE_8); } \
+		if ((mask)& PROBE_N(9)) { stm32_configgpio(PROBE_9); } \
+	} while(0)
+
+# define PROBE(n,s)  do {stm32_gpiowrite(PROBE_##n,(s));}while(0)
+# define PROBE_MARK(n) PROBE(n,false);PROBE(n,true)
+#else
+# define PROBE_INIT(mask)
+# define PROBE(n,s)
+# define PROBE_MARK(n)
+#endif
+
+#endif  /*__NUTTX_CONFIG_PX4_FMU_V6X_INCLUDE_BOARD_H  */

boards/ark/fmu-v6x/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,87 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+// DMAMUX1 Using at most 8 Channels on DMA1 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI1_RX    DMAMAP_DMA12_SPI1RX_0     /* 1 DMA1:37 ICM-20649 */
+#define DMAMAP_SPI1_TX    DMAMAP_DMA12_SPI1TX_0     /* 2 DMA1:38 ICM-20649 */
+
+#define DMAMAP_SPI2_RX    DMAMAP_DMA12_SPI2RX_0     /* 3 DMA1:39 ICM-42688-P */
+#define DMAMAP_SPI2_TX    DMAMAP_DMA12_SPI2TX_0     /* 4 DMA1:40 ICM-42688-P */
+
+//#define DMAMAP_USART1_RX  DMAMAP_DMA12_USART1RX_0 /*  DMA1:41  GPS1 */
+//#define DMAMAP_USART1_TX  DMAMAP_DMA12_USART1TX_0 /*  DMA1:42  GPS1 */
+
+//#define DMAMAP_USART2_RX  DMAMAP_DMA12_USART2RX_0 /*  DMA1:43 Telem3 */
+//#define DMAMAP_USART2_TX  DMAMAP_DMA12_USART2TX_0 /*  DMA1:44 Telem3 */
+
+//#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_0 /*  DMA1:45 DEBUG */
+//#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_0 /*  DMA1:46 DEBUG */
+
+//#define DMAMAP_UART4_RX   DMAMAP_DMA12_UART4RX_0  /*  DMA1:63 EXT2 */
+//#define DMAMAP_UART4_TX   DMAMAP_DMA12_UART4TX_0  /*  DMA1:64 EXT2 */
+
+#define DMAMAP_USART6_RX  DMAMAP_DMA12_USART6RX_0   /* 5 DMA1:71 PX4IO */
+#define DMAMAP_USART6_TX  DMAMAP_DMA12_USART6TX_0   /* 6 DMA1:72 PX4IO */
+
+// Assigned in timer_config.cpp
+
+// Timer 4                                          /* 7 DMA1:32 TIM4UP */
+// Timer 5                                          /* 8 DMA1:50 TIM5UP */
+
+// DMAMUX2 Using at most 8 Channels on DMA2 --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI3_RX    DMAMAP_DMA12_SPI3RX_1     /* 1 DMA2:61 BMI088 */
+#define DMAMAP_SPI3_TX    DMAMAP_DMA12_SPI3TX_1     /* 2 DMA2:62 BMI088 */
+
+#define DMAMAP_USART3_RX  DMAMAP_DMA12_USART3RX_1   /* 3 DMA2:45 DEBUG */
+#define DMAMAP_USART3_TX  DMAMAP_DMA12_USART3TX_1   /* 4 DMA2:46 DEBUG */
+
+#define DMAMAP_UART5_RX   DMAMAP_DMA12_UART5RX_1    /* 5 DMA2:65 TELEM2 */
+#define DMAMAP_UART5_TX   DMAMAP_DMA12_UART5TX_1    /* 6 DMA2:66  TELEM2 */
+
+#define DMAMAP_UART7_RX   DMAMAP_DMA12_UART7RX_1    /* 7 DMA1:79  TELEM1 */
+#define DMAMAP_UART7_TX   DMAMAP_DMA12_UART7TX_1    /* 8 DMA1:80  TELEM1 */
+
+//#define DMAMAP_UART8_RX   DMAMAP_DMA12_UART8RX_1  /*  DMA1:81  GPS2 */
+//#define DMAMAP_UART8_TX   DMAMAP_DMA12_UART8TX_1  /*  DMA1:82  GPS2 */
+
+// DMAMUX2 Using at most 8 Channels on BDMA --------   Assigned
+//                                                     V
+
+#define DMAMAP_SPI6_RX    DMAMAP_BDMA_SPI6_RX       /* 1 BDMA:11 SPI J11 */
+#define DMAMAP_SPI6_TX    DMAMAP_BDMA_SPI6_TX       /* 2 BDMA:12 SPI J11 */

boards/ark/fmu-v6x/nuttx-config/nsh/defconfig

@@ -0,0 +1,295 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DISABLE_ENVIRON is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_MMCSD_SPI is not set
+# CONFIG_NSH_DISABLEBG is not set
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ARP is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_DISABLE_TIME is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/ark/fmu-v6x/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="ark"
+CONFIG_ARCH_CHIP="stm32h7"
+CONFIG_ARCH_CHIP_STM32H753II=y
+CONFIG_ARCH_CHIP_STM32H7=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARMV7M_BASEPRI_WAR=y
+CONFIG_ARMV7M_DCACHE=y
+CONFIG_ARMV7M_DTCM=y
+CONFIG_ARMV7M_ICACHE=y
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARM_MPU_EARLY_RESET=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_LOOPSPERMSEC=95751
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0039
+CONFIG_CDCACM_PRODUCTSTR="ARK FMU v6X.x"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=12000
+CONFIG_CDCACM_VENDORID=0x3185
+CONFIG_CDCACM_VENDORSTR="ARK"
+CONFIG_CLOCK_MONOTONIC=y
+CONFIG_DEBUG_FULLOPT=y
+CONFIG_DEBUG_HARDFAULT_ALERT=y
+CONFIG_DEBUG_MEMFAULT=y
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEFAULT_SMALL=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_MAXSIZE=1024
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_ETH0_PHY_LAN8742A=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FSUTILS_IPCFG=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_INCLUDE_PROGMEM=y
+CONFIG_FS_PROCFS_MAX_TASKS=64
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_IOB_NBUFFERS=24
+CONFIG_IOB_THROTTLE=0
+CONFIG_IPCFG_BINARY=y
+CONFIG_IPCFG_CHARDEV=y
+CONFIG_IPCFG_PATH="/fs/mtd_net"
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_LONG_LONG=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_MMCSD_SDIOWAIT_WRCOMPLETE=y
+CONFIG_MM_REGIONS=4
+CONFIG_MTD=y
+CONFIG_MTD_BYTE_WRITE=y
+CONFIG_MTD_PARTITION=y
+CONFIG_MTD_PROGMEM=y
+CONFIG_MTD_RAMTRON=y
+CONFIG_NAME_MAX=40
+CONFIG_NET=y
+CONFIG_NETDB_DNSCLIENT=y
+CONFIG_NETDB_DNSCLIENT_ENTRIES=8
+CONFIG_NETDB_DNSSERVER_NOADDR=y
+CONFIG_NETDEV_PHY_IOCTL=y
+CONFIG_NETINIT_DHCPC=y
+CONFIG_NETINIT_DNS=y
+CONFIG_NETINIT_DNSIPADDR=0XC0A800FE
+CONFIG_NETINIT_DRIPADDR=0XC0A800FE
+CONFIG_NETINIT_THREAD=y
+CONFIG_NETINIT_THREAD_PRIORITY=49
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NET_ARP_IPIN=y
+CONFIG_NET_ARP_SEND=y
+CONFIG_NET_BROADCAST=y
+CONFIG_NET_ETH_PKTSIZE=1518
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_SOCKET=y
+CONFIG_NET_SOLINGER=y
+CONFIG_NET_TCP=y
+CONFIG_NET_TCPBACKLOG=y
+CONFIG_NET_TCP_DELAYED_ACK=y
+CONFIG_NET_TCP_WRITE_BUFFERS=y
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+CONFIG_NET_UDP_WRITE_BUFFERS=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_QUOTE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_TELNET_LOGIN=y
+CONFIG_NSH_VARS=y
+CONFIG_OTG_ID_GPIO_DISABLE=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_MUTEX_ROBUST=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAMTRON_SETSPEED=y
+CONFIG_RAM_SIZE=245760
+CONFIG_RAM_START=0x20010000
+CONFIG_RAW_BINARY=y
+CONFIG_READLINE_CMD_HISTORY=y
+CONFIG_READLINE_TABCOMPLETION=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SDMMC2_SDIO_PULLUP=y
+CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS=y
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STM32H7_ADC1=y
+CONFIG_STM32H7_ADC3=y
+CONFIG_STM32H7_BBSRAM=y
+CONFIG_STM32H7_BBSRAM_FILES=5
+CONFIG_STM32H7_BDMA=y
+CONFIG_STM32H7_BKPSRAM=y
+CONFIG_STM32H7_DMA1=y
+CONFIG_STM32H7_DMA2=y
+CONFIG_STM32H7_DMACAPABLE=y
+CONFIG_STM32H7_ETHMAC=y
+CONFIG_STM32H7_FLASH_OVERRIDE_I=y
+CONFIG_STM32H7_FLOWCONTROL_BROKEN=y
+CONFIG_STM32H7_I2C1=y
+CONFIG_STM32H7_I2C2=y
+CONFIG_STM32H7_I2C3=y
+CONFIG_STM32H7_I2C4=y
+CONFIG_STM32H7_I2C_DYNTIMEO=y
+CONFIG_STM32H7_I2C_DYNTIMEO_STARTSTOP=10
+CONFIG_STM32H7_OTGFS=y
+CONFIG_STM32H7_PHYSR=31
+CONFIG_STM32H7_PHYSR_100MBPS=0x8
+CONFIG_STM32H7_PHYSR_FULLDUPLEX=0x10
+CONFIG_STM32H7_PHYSR_MODE=0x10
+CONFIG_STM32H7_PHYSR_SPEED=0x8
+CONFIG_STM32H7_PROGMEM=y
+CONFIG_STM32H7_RTC=y
+CONFIG_STM32H7_RTC_AUTO_LSECLOCK_START_DRV_CAPABILITY=y
+CONFIG_STM32H7_RTC_MAGIC_REG=1
+CONFIG_STM32H7_SAVE_CRASHDUMP=y
+CONFIG_STM32H7_SDMMC2=y
+CONFIG_STM32H7_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32H7_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32H7_SPI1=y
+CONFIG_STM32H7_SPI1_DMA=y
+CONFIG_STM32H7_SPI1_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI2=y
+CONFIG_STM32H7_SPI2_DMA=y
+CONFIG_STM32H7_SPI2_DMA_BUFFER=4096
+CONFIG_STM32H7_SPI3=y
+CONFIG_STM32H7_SPI3_DMA=y
+CONFIG_STM32H7_SPI3_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI5=y
+CONFIG_STM32H7_SPI6=y
+CONFIG_STM32H7_SPI6_DMA=y
+CONFIG_STM32H7_SPI6_DMA_BUFFER=1024
+CONFIG_STM32H7_SPI_DMA=y
+CONFIG_STM32H7_TIM12=y
+CONFIG_STM32H7_TIM1=y
+CONFIG_STM32H7_TIM4=y
+CONFIG_STM32H7_TIM5=y
+CONFIG_STM32H7_UART4=y
+CONFIG_STM32H7_UART5=y
+CONFIG_STM32H7_UART7=y
+CONFIG_STM32H7_UART8=y
+CONFIG_STM32H7_USART1=y
+CONFIG_STM32H7_USART2=y
+CONFIG_STM32H7_USART3=y
+CONFIG_STM32H7_USART6=y
+CONFIG_STM32H7_USART_BREAKS=y
+CONFIG_STM32H7_USART_INVERT=y
+CONFIG_STM32H7_USART_SINGLEWIRE=y
+CONFIG_STM32H7_USART_SWAP=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_DHCPC_RENEW=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_SYSTEM_PING=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=600
+CONFIG_UART4_TXBUFSIZE=1500
+CONFIG_UART5_IFLOWCONTROL=y
+CONFIG_UART5_OFLOWCONTROL=y
+CONFIG_UART5_RXDMA=y
+CONFIG_UART5_TXBUFSIZE=3000
+CONFIG_UART5_TXDMA=y
+CONFIG_UART7_BAUD=57600
+CONFIG_UART7_IFLOWCONTROL=y
+CONFIG_UART7_OFLOWCONTROL=y
+CONFIG_UART7_RXBUFSIZE=600
+CONFIG_UART7_RXDMA=y
+CONFIG_UART7_TXBUFSIZE=3000
+CONFIG_UART7_TXDMA=y
+CONFIG_UART8_BAUD=57600
+CONFIG_UART8_RXBUFSIZE=600
+CONFIG_UART8_TXBUFSIZE=1500
+CONFIG_USART1_BAUD=57600
+CONFIG_USART1_RXBUFSIZE=600
+CONFIG_USART1_TXBUFSIZE=1500
+CONFIG_USART2_BAUD=57600
+CONFIG_USART2_IFLOWCONTROL=y
+CONFIG_USART2_OFLOWCONTROL=y
+CONFIG_USART2_RXBUFSIZE=600
+CONFIG_USART2_TXBUFSIZE=3000
+CONFIG_USART3_BAUD=57600
+CONFIG_USART3_RXBUFSIZE=180
+CONFIG_USART3_RXDMA=y
+CONFIG_USART3_SERIAL_CONSOLE=y
+CONFIG_USART3_TXBUFSIZE=1500
+CONFIG_USART3_TXDMA=y
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=600
+CONFIG_USART6_TXBUFSIZE=1500
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_WATCHDOG=y

boards/ark/fmu-v6x/nuttx-config/scripts/bootloader_script.ld

@@ -0,0 +1,215 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2022 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The ARKV6X uses an STM32H753II has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The ARKV6X has a test point on board, the BOOT0 pin is at ground so by
+ * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
+ * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743II also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * The bootloader uses the first sector of the flash, which is 128K in length.
+ */
+
+MEMORY
+{
+	itcm  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	flash (rx)  : ORIGIN = 0x08000000, LENGTH =  128K
+	dtcm1 (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	dtcm2 (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	sram  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K
+	sram1 (rwx) : ORIGIN = 0x30000000, LENGTH =  128K
+	sram2 (rwx) : ORIGIN = 0x30020000, LENGTH =  128K
+	sram3 (rwx) : ORIGIN = 0x30040000, LENGTH =   32K
+	sram4 (rwx) : ORIGIN = 0x38000000, LENGTH =   64K
+	bbram (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > flash
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > flash
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/ark/fmu-v6x/nuttx-config/scripts/script.ld

@@ -0,0 +1,229 @@
+/****************************************************************************
+ * scripts/script.ld
+ *
+ *   Copyright (C) 2016, 2022 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The ARKV6X uses an STM32H753II has 2048Kb of main FLASH memory.
+ * The flash memory is partitioned into a User Flash memory and a System
+ * Flash memory. Each of these memories has two banks:
+ *
+ *   1) User Flash memory:
+ *
+ *      Bank 1: Start address 0x0800:0000 to 0x080F:FFFF with 8 sectors, 128Kb each
+ *      Bank 2: Start address 0x0810:0000 to 0x081F:FFFF with 8 sectors, 128Kb each
+ *
+ *   2) System Flash memory:
+ *
+ *      Bank 1: Start address 0x1FF0:0000 to 0x1FF1:FFFF with 1 x 128Kb sector
+ *      Bank 1: Start address 0x1FF4:0000 to 0x1FF5:FFFF with 1 x 128Kb sector
+ *
+ *   3) User option bytes for user configuration, only in Bank 1.
+ *
+ * In the STM32H743II, two different boot spaces can be selected through
+ * the BOOT pin and the boot base address programmed in the BOOT_ADD0 and
+ * BOOT_ADD1 option bytes:
+ *
+ *   1) BOOT=0: Boot address defined by user option byte BOOT_ADD0[15:0].
+ *      ST programmed value: Flash memory at 0x0800:0000
+ *   2) BOOT=1: Boot address defined by user option byte BOOT_ADD1[15:0].
+ *      ST programmed value: System bootloader at 0x1FF0:0000
+ *
+ * The ARKV6X has a test point on board, the BOOT0 pin is at ground so by
+ * default, the STM32 will boot to address 0x0800:0000 in FLASH unless the test
+ * point is pulled to 3.3V.then the boot will be from 0x1FF0:0000
+ *
+ * The STM32H743II also has 1024Kb of data SRAM.
+ * SRAM is split up into several blocks and into three power domains:
+ *
+ *   1) TCM SRAMs are dedicated to the Cortex-M7 and are accessible with
+ *      0 wait states by the Cortex-M7 and by MDMA through AHBS slave bus
+ *
+ *      1.1) 128Kb of DTCM-RAM beginning at address 0x2000:0000
+ *
+ *           The DTCM-RAM is organized as 2 x 64Kb DTCM-RAMs on 2 x 32 bit
+ *           DTCM ports. The DTCM-RAM could be used for critical real-time
+ *           data, such as interrupt service routines or stack / heap memory.
+ *           Both DTCM-RAMs can be used in parallel (for load/store operations)
+ *           thanks to the Cortex-M7 dual issue capability.
+ *
+ *      1.2)  64Kb of ITCM-RAM beginning at address 0x0000:0000
+ *
+ *           This RAM is connected to ITCM 64-bit interface designed for
+ *           execution of critical real-times routines by the CPU.
+ *
+ *   2) AXI SRAM (D1 domain) accessible by all system masters except BDMA
+ *      through D1 domain AXI bus matrix
+ *
+ *      2.1) 512Kb of SRAM beginning at address 0x2400:0000
+ *
+ *   3) AHB SRAM (D2 domain) accessible by all system masters except BDMA
+ *      through D2 domain AHB bus matrix
+ *
+ *      3.1) 128Kb of SRAM1 beginning at address 0x3000:0000
+ *      3.2) 128Kb of SRAM2 beginning at address 0x3002:0000
+ *      3.3)  32Kb of SRAM3 beginning at address 0x3004:0000
+ *
+ *      SRAM1 - SRAM3 are one contiguous block: 288Kb at address 0x3000:0000
+ *
+ *   4) AHB SRAM (D3 domain) accessible by most of system masters
+ *      through D3 domain AHB bus matrix
+ *
+ *      4.1)  64Kb of SRAM4 beginning at address 0x3800:0000
+ *      4.1)   4Kb of backup RAM beginning at address 0x3880:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ */
+
+MEMORY
+{
+	ITCM_RAM  (rwx) : ORIGIN = 0x00000000, LENGTH =   64K
+	FLASH      (rx) : ORIGIN = 0x08020000, LENGTH = 1920K
+
+	DTCM1_RAM (rwx) : ORIGIN = 0x20000000, LENGTH =   64K
+	DTCM2_RAM (rwx) : ORIGIN = 0x20010000, LENGTH =   64K
+	AXI_SRAM  (rwx) : ORIGIN = 0x24000000, LENGTH =  512K /* D1 domain AXI bus */
+	SRAM1     (rwx) : ORIGIN = 0x30000000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM2     (rwx) : ORIGIN = 0x30020000, LENGTH =  128K /* D2 domain AHB bus */
+	SRAM3     (rwx) : ORIGIN = 0x30040000, LENGTH =   32K /* D2 domain AHB bus */
+	SRAM4     (rwx) : ORIGIN = 0x38000000, LENGTH =   64K /* D3 domain */
+	BKPRAM    (rwx) : ORIGIN = 0x38800000, LENGTH =    4K
+}
+
+OUTPUT_ARCH(arm)
+EXTERN(_vectors)
+ENTRY(_stext)
+
+/*
+ * Ensure that abort() is present in the final object.  The exception handling
+ * code pulled in by libgcc.a requires it (and that code cannot be easily avoided).
+ */
+EXTERN(abort)
+EXTERN(_bootdelay_signature)
+EXTERN(board_get_manifest)
+
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		. = ALIGN(32);
+		/*
+		This signature provides the bootloader with a way to delay booting
+		*/
+		_bootdelay_signature = ABSOLUTE(.);
+		FILL(0xffecc2925d7d05c5)
+		. += 8;
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+
+	} > FLASH
+
+	/*
+	 * Init functions (static constructors and the like)
+	 */
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		KEEP(*(.init_array .init_array.*))
+		_einit = ABSOLUTE(.);
+	} > FLASH
+
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > FLASH
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > FLASH
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+
+		/* Pad out last section as the STM32H7 Flash write size is 256 bits. 32 bytes */
+		. = ALIGN(16);
+		FILL(0xffff)
+		. += 16;
+	} > AXI_SRAM AT > FLASH  = 0xffff
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		. = ALIGN(4);
+		_ebss = ABSOLUTE(.);
+	} > AXI_SRAM
+
+	/* Emit the the D3 power domain section for locating BDMA data */
+
+	.sram4_reserve (NOLOAD) :
+	{
+		*(.sram4)
+		. = ALIGN(4);
+		_sram4_heap_start = ABSOLUTE(.);
+	} > SRAM4
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

boards/ark/fmu-v6x/src/CMakeLists.txt

@@ -0,0 +1,71 @@
+############################################################################
+#
+#   Copyright (c) 2016 PX4 Development Team. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name PX4 nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+if("${PX4_BOARD_LABEL}" STREQUAL  "bootloader")
+	add_library(drivers_board
+		bootloader_main.c
+		usb.c
+	)
+	target_link_libraries(drivers_board
+		PRIVATE
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
+			bootloader
+	)
+	target_include_directories(drivers_board PRIVATE ${PX4_SOURCE_DIR}/platforms/nuttx/src/bootloader/common)
+
+else()
+	add_library(drivers_board
+		can.c
+		i2c.cpp
+		init.c
+		led.c
+		mtd.cpp
+		manifest.c
+		sdio.c
+		spi.cpp
+		timer_config.cpp
+		usb.c
+	)
+	add_dependencies(drivers_board arch_board_hw_info)
+
+	target_link_libraries(drivers_board
+		PRIVATE
+			arch_io_pins
+			arch_spi
+			arch_board_hw_info
+			drivers__led # drv_led_start
+			nuttx_arch # sdio
+			nuttx_drivers # sdio
+			px4_layer
+	)
+endif()

boards/ark/fmu-v6x/src/board_config.h

@@ -0,0 +1,524 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2016-2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file board_config.h
+ *
+ * ARKFMU-v6x internal definitions
+ */
+
+#pragma once
+
+/****************************************************************************************************
+ * Included Files
+ ****************************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+
+#include <stm32_gpio.h>
+
+/****************************************************************************************************
+ * Definitions
+ ****************************************************************************************************/
+
+#undef TRACE_PINS
+
+/* PX4IO connection configuration */
+
+#define BOARD_USES_PX4IO_VERSION       2
+#define PX4IO_SERIAL_DEVICE            "/dev/ttyS5"
+#define PX4IO_SERIAL_TX_GPIO           GPIO_USART6_TX
+#define PX4IO_SERIAL_RX_GPIO           GPIO_USART6_RX
+#define PX4IO_SERIAL_BASE              STM32_USART6_BASE
+#define PX4IO_SERIAL_VECTOR            STM32_IRQ_USART6
+#define PX4IO_SERIAL_TX_DMAMAP         DMAMAP_USART6_TX
+#define PX4IO_SERIAL_RX_DMAMAP         DMAMAP_USART6_RX
+#define PX4IO_SERIAL_RCC_REG           STM32_RCC_APB2ENR
+#define PX4IO_SERIAL_RCC_EN            RCC_APB2ENR_USART6EN
+#define PX4IO_SERIAL_CLOCK             STM32_PCLK2_FREQUENCY
+#define PX4IO_SERIAL_BITRATE           1500000               /* 1.5Mbps -> max rate for IO */
+
+/* Configuration ************************************************************************************/
+
+#define BOARD_HAS_LTC44XX_VALIDS      2 //  N Bricks
+#define BOARD_HAS_USB_VALID           1 // LTC Has USB valid
+#define BOARD_HAS_NBAT_V              2d // 2 Digital Voltage
+#define BOARD_HAS_NBAT_I              2d // 2 Digital Current
+
+/* PX4FMU GPIOs ***********************************************************************************/
+
+/* Trace Clock and D0-D3 are available on the trace connector
+ *
+ * TRACECLK PE2  - Dedicated       - Trace Connector Pin 1
+ * TRACED0  PE3  - nLED_RED        - Trace Connector Pin 3
+ * TRACED1  PE4  - nLED_GREEN      - Trace Connector Pin 5
+ * TRACED2  PE5  - nLED_BLUE       - Trace Connector Pin 7
+ * TRACED3  PE6  - nARMED          - Trace Connector Pin 8
+
+ */
+
+/* LEDs are driven with push open drain to support Anode to 5V or 3.3V or used as TRACE0-2 */
+
+#if !defined(TRACE_PINS)
+#  define GPIO_nLED_RED        /* PE3 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
+#  define GPIO_nLED_GREEN      /* PE4 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN4)
+#  define GPIO_nLED_BLUE       /* PE5 */  (GPIO_OUTPUT|GPIO_OPENDRAIN|GPIO_SPEED_50MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN5)
+
+#  define BOARD_HAS_CONTROL_STATUS_LEDS      1
+#  define BOARD_OVERLOAD_LED     LED_RED
+#  define BOARD_ARMED_STATE_LED  LED_BLUE
+
+#else
+
+#  define GPIO_TRACECLK1 (GPIO_TRACECLK |GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN2)
+#  define GPIO_TRACED0   (GPIO_TRACED0_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN3)
+#  define GPIO_TRACED1   (GPIO_TRACED1_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN4)
+#  define GPIO_TRACED2   (GPIO_TRACED2_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN5)
+#  define GPIO_TRACED3   (GPIO_TRACED3_2|GPIO_PULLUP|GPIO_SPEED_100MHz|GPIO_PUSHPULL)  //(GPIO_ALT|GPIO_AF0|GPIO_PORTE|GPIO_PIN6)
+//#define GPIO_TRACESWO                        //(GPIO_ALT|GPIO_AF0|GPIO_PORTB|GPIO_PIN3)
+
+#  undef  BOARD_HAS_CONTROL_STATUS_LEDS
+#  undef  BOARD_OVERLOAD_LED
+#  undef  BOARD_ARMED_STATE_LED
+
+#  define GPIO_nLED_RED    GPIO_TRACED0
+#  define GPIO_nLED_GREEN  GPIO_TRACED1
+#  define GPIO_nLED_BLUE   GPIO_TRACED2
+#  define GPIO_nARMED      GPIO_TRACED3
+#  define GPIO_nARMED_INIT GPIO_TRACED3
+#endif
+
+
+/* SPI */
+
+#define SPI6_nRESET_EXTERNAL1       /* PF10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN10)
+#define GPIO_SYNC                   /* PE9  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_100MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN9)
+
+/* I2C busses */
+
+/* Devices on the onboard buses.
+ *
+ * Note that these are unshifted addresses.
+ */
+#define PX4_I2C_OBDEV_SE050         0x48
+
+/*
+ * ADC channels
+ *
+ * These are the channel numbers of the ADCs of the microcontroller that
+ * can be used by the Px4 Firmware in the adc driver
+ */
+
+/* ADC defines to be used in sensors.cpp to read from a particular channel */
+
+#define ADC1_CH(n)                  (n)
+
+/* N.B. there is no offset mapping needed for ADC3 because */
+#define ADC3_CH(n)                  (n)
+
+/* We are only use ADC3 for REV/VER.
+ * ADC3_6V6 and ADC3_3V3 are mapped back to ADC1
+ * To do this We are relying on PC2_C, PC3_C being connected to PC2, PC3
+ * respectively by the SYSCFG_PMCR default of setting for PC3SO PC2SO PA1SO
+ * PA0SO of 0.
+ *
+ *  0 Analog switch closed (pads are connected through the analog switch)
+ *
+ * So ADC3_INP0 is GPIO_ADC123_INP12
+ *    ADC3_INP1 is GPIO_ADC12_INP13
+ */
+
+/* Define GPIO pins used as ADC N.B. Channel numbers must match below  */
+
+#define PX4_ADC_GPIO  \
+	/* PA0  */  GPIO_ADC1_INP16,   \
+	/* PA4  */  GPIO_ADC12_INP18,  \
+	/* PB0  */  GPIO_ADC12_INP9,   \
+	/* PB1  */  GPIO_ADC12_INP5,   \
+	/* PC2  */  GPIO_ADC123_INP12, \
+	/* PC3  */  GPIO_ADC12_INP13,  \
+	/* PF12 */  GPIO_ADC1_INP6,    \
+	/* PH3  */  GPIO_ADC3_INP14,   \
+	/* PH4  */  GPIO_ADC3_INP15
+
+/* Define Channel numbers must match above GPIO pin IN(n)*/
+#define ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL     /* PA0  */  ADC1_CH(16)
+#define ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL     /* PA4  */  ADC1_CH(18)
+#define ADC_SCALED_VDD_3V3_SENSORS3_CHANNEL     /* PB0  */  ADC1_CH(9)
+#define ADC_SCALED_V5_CHANNEL                   /* PB1  */  ADC1_CH(5)
+#define ADC_ADC3_6V6_CHANNEL                    /* PC2  */  ADC3_CH(12)
+#define ADC_ADC3_3V3_CHANNEL                    /* PC3  */  ADC3_CH(13)
+#define ADC_SCALED_VDD_3V3_SENSORS4_CHANNEL     /* PF12 */  ADC1_CH(6)
+#define ADC_HW_VER_SENSE_CHANNEL                /* PH3  */  ADC3_CH(14)
+#define ADC_HW_REV_SENSE_CHANNEL                /* PH4  */  ADC3_CH(15)
+
+#define ADC_CHANNELS \
+	((1 << ADC_SCALED_VDD_3V3_SENSORS1_CHANNEL) | \
+	 (1 << ADC_SCALED_VDD_3V3_SENSORS2_CHANNEL) | \
+	 (1 << ADC_SCALED_VDD_3V3_SENSORS3_CHANNEL) | \
+	 (1 << ADC_SCALED_V5_CHANNEL)               | \
+	 (1 << ADC_ADC3_6V6_CHANNEL)                | \
+	 (1 << ADC_ADC3_3V3_CHANNEL))               | \
+	(1 << ADC_SCALED_VDD_3V3_SENSORS4_CHANNEL)
+
+/* HW has to large of R termination on ADC todo:change when HW value is chosen */
+
+#define HW_REV_VER_ADC_BASE STM32_ADC3_BASE
+
+#define SYSTEM_ADC_BASE STM32_ADC1_BASE
+
+/* HW has to large of R termination on ADC todo:change when HW value is chosen */
+#define BOARD_ADC_OPEN_CIRCUIT_V     (5.6f)
+
+/* HW Version and Revision drive signals Default to 1 to detect */
+#define BOARD_HAS_HW_VERSIONING
+
+#define GPIO_HW_VER_REV_DRIVE  /* PG0 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN0)
+#define GPIO_HW_REV_SENSE      /* PH4 */  GPIO_ADC3_INP15
+#define GPIO_HW_VER_SENSE      /* PH3 */  GPIO_ADC3_INP14
+#define HW_INFO_INIT_PREFIX    "ARKV6X"
+
+#define BOARD_NUM_SPI_CFG_HW_VERSIONS 2 // Rev 0 and Rev 3,4 Sensor sets
+//                 Base/FMUM
+#define ARKV6X00   HW_VER_REV(0x0,0x0) // ARKV6X,                 Rev 0
+#define ARKV6X01   HW_VER_REV(0x0,0x1) // ARKV6X,     BMI388 I2C2 Rev 1
+#define ARKV6X03   HW_VER_REV(0x0,0x3) // ARKV6X,     Sensor Set  Rev 3
+#define ARKV6X04   HW_VER_REV(0x0,0x4) // ARKV6X,     Sensor Set  Rev 4
+#define ARKV6X10   HW_VER_REV(0x1,0x0) // NO PX4IO,               Rev 0
+#define ARKV6X13   HW_VER_REV(0x1,0x3) // NO PX4IO,   Sensor Set  Rev 3
+#define ARKV6X14   HW_VER_REV(0x1,0x4) // NO PX4IO,   Sensor Set  Rev 4
+//#define ARKV6X40   HW_VER_REV(0x4,0x0) // ARKV6X,                    HB CM4 base Rev 0 // never shipped
+//#define ARKV6X41   HW_VER_REV(0x4,0x1) // ARKV6X,     BMI388 I2C2    HB CM4 base Rev 1 // never shipped
+#define ARKV6X43   HW_VER_REV(0x4,0x3) // ARKV6X,     Sensor Set     HB CM4 base Rev 3
+#define ARKV6X44   HW_VER_REV(0x4,0x4) // ARKV6X,     Sensor Set     HB CM4 base Rev 4
+#define ARKV6X50   HW_VER_REV(0x5,0x0) // ARKV6X, ARKV6X Rev 0 with HB Mini Rev 5
+//#define ARKV6X51   HW_VER_REV(0x5,0x1) // ARKV6X,     BMI388 I2C2    HB Mini Rev 1 // never shipped
+#define ARKV6X53   HW_VER_REV(0x5,0x3) // ARKV6X,     Sensor Set     HB Mini Rev 3
+#define ARKV6X54   HW_VER_REV(0x5,0x4) // ARKV6X,     Sensor Set     HB Mini Rev 4
+
+#define UAVCAN_NUM_IFACES_RUNTIME  1
+
+/* HEATER
+ * PWM in future
+ */
+#define GPIO_HEATER_OUTPUT   /* PB10  T2CH3 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN10)
+#define HEATER_OUTPUT_EN(on_true)	       px4_arch_gpiowrite(GPIO_HEATER_OUTPUT, (on_true))
+
+/* PE6 is nARMED
+ *  The GPIO will be set as input while not armed HW will have external HW Pull UP.
+ *  While armed it shall be configured at a GPIO OUT set LOW
+ */
+#if !defined(TRACE_PINS)
+#define GPIO_nARMED_INIT     /* PE6 */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN6)
+#define GPIO_nARMED          /* PE6 */  (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTE|GPIO_PIN6)
+#define BOARD_INDICATE_EXTERNAL_LOCKOUT_STATE(enabled)  px4_arch_configgpio((enabled) ? GPIO_nARMED : GPIO_nARMED_INIT)
+#define BOARD_GET_EXTERNAL_LOCKOUT_STATE() px4_arch_gpioread(GPIO_nARMED)
+#endif
+
+
+/* PWM
+ */
+#define DIRECT_PWM_OUTPUT_CHANNELS   9
+
+
+/* Power supply control and monitoring GPIOs */
+
+#define GPIO_nPOWER_IN_A                /* PG1  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN1)
+#define GPIO_nPOWER_IN_B                /* PG2  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN2)
+#define GPIO_nPOWER_IN_C                /* PG3  */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN3)
+
+#define GPIO_nVDD_BRICK1_VALID          GPIO_nPOWER_IN_A /* Brick 1 Is Chosen */
+#define GPIO_nVDD_BRICK2_VALID          GPIO_nPOWER_IN_B /* Brick 2 Is Chosen  */
+#define BOARD_NUMBER_BRICKS             2
+#define BOARD_NUMBER_DIGITAL_BRICKS     2
+#define GPIO_nVDD_USB_VALID             GPIO_nPOWER_IN_C /* USB     Is Chosen */
+
+#define GPIO_VDD_5V_PERIPH_nEN          /* PG4  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN4)
+#define GPIO_VDD_5V_PERIPH_nOC          /* PE15 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTE|GPIO_PIN15)
+#define GPIO_VDD_5V_HIPOWER_nEN         /* PG10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTG|GPIO_PIN10)
+#define GPIO_VDD_5V_HIPOWER_nOC         /* PF13 */ (GPIO_INPUT |GPIO_FLOAT|GPIO_PORTF|GPIO_PIN13)
+#define GPIO_VDD_3V3_SENSORS4_EN        /* PG8  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN8)
+#define GPIO_VDD_3V3_SPEKTRUM_POWER_EN  /* PH2  */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTH|GPIO_PIN2)
+#define GPIO_VDD_3V3_SD_CARD_EN         /* PC13 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN13)
+
+/* Spare GPIO */
+
+#define GPIO_PG6                        /* PG6  */  (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTG|GPIO_PIN6)
+#define GPIO_PD15                       /* PD15 */  (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTD|GPIO_PIN15)
+
+/* ETHERNET GPIO */
+
+#define GPIO_ETH_POWER_EN              /* PG15 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTG|GPIO_PIN15)
+
+/* NFC GPIO */
+
+#define GPIO_NFC_GPIO                   /* PC0 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTC|GPIO_PIN0)
+
+
+/* Define True logic Power Control in arch agnostic form */
+
+#define VDD_5V_PERIPH_EN(on_true)          px4_arch_gpiowrite(GPIO_VDD_5V_PERIPH_nEN, !(on_true))
+#define VDD_5V_HIPOWER_EN(on_true)         px4_arch_gpiowrite(GPIO_VDD_5V_HIPOWER_nEN, !(on_true))
+#define VDD_3V3_SENSORS4_EN(on_true)       px4_arch_gpiowrite(GPIO_VDD_3V3_SENSORS4_EN, (on_true))
+#define VDD_3V3_SPEKTRUM_POWER_EN(on_true) px4_arch_gpiowrite(GPIO_VDD_3V3_SPEKTRUM_POWER_EN, (on_true))
+#define READ_VDD_3V3_SPEKTRUM_POWER_EN()   px4_arch_gpioread(GPIO_VDD_3V3_SPEKTRUM_POWER_EN)
+#define VDD_3V3_SD_CARD_EN(on_true)        px4_arch_gpiowrite(GPIO_VDD_3V3_SD_CARD_EN, (on_true))
+#define VDD_3V3_ETH_POWER_EN(on_true)      px4_arch_gpiowrite(GPIO_ETH_POWER_EN, (on_true))
+
+
+/* Tone alarm output */
+
+#define TONE_ALARM_TIMER        14  /* Timer 14 */
+#define TONE_ALARM_CHANNEL      1  /* PF9 GPIO_TIM14_CH1OUT_2 */
+
+#define GPIO_BUZZER_1           /* PF9 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTF|GPIO_PIN9)
+
+#define GPIO_TONE_ALARM_IDLE    GPIO_BUZZER_1
+#define GPIO_TONE_ALARM         GPIO_TIM14_CH1OUT_2
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing
+ */
+#define GPIO_OTGFS_VBUS         /* PA9 */ (GPIO_INPUT|GPIO_PULLDOWN|GPIO_SPEED_100MHz|GPIO_PORTA|GPIO_PIN9)
+
+/* High-resolution timer */
+#define HRT_TIMER               8  /* use timer8 for the HRT */
+#define HRT_TIMER_CHANNEL       3  /* use capture/compare channel 3 */
+
+#define HRT_PPM_CHANNEL         /* T8C1 */  1  /* use capture/compare channel 1 */
+#define GPIO_PPM_IN             /* PI5 T8C1 */ GPIO_TIM8_CH1IN_2
+
+/* RC Serial port */
+
+#define RC_SERIAL_PORT                     "/dev/ttyS5"
+#define RC_SERIAL_SINGLEWIRE
+
+/* Input Capture Channels. */
+#define INPUT_CAP1_TIMER                  1
+#define INPUT_CAP1_CHANNEL     /* T1C2 */ 2
+#define GPIO_INPUT_CAP1        /*  PE11 */ GPIO_TIM1_CH2IN
+
+/* PWM input driver. Use FMU AUX5 pins attached to timer4 channel 2 */
+#define PWMIN_TIMER                       4
+#define PWMIN_TIMER_CHANNEL    /* T4C2 */ 2
+#define GPIO_PWM_IN            /* PD13 */ GPIO_TIM4_CH2IN_2
+
+/* Safety Switch is HW version dependent on having an PX4IO
+ * So we init to a benign state with the _INIT definition
+ * and provide the the non _INIT one for the driver to make a run time
+ * decision to use it.
+ */
+#define GPIO_nSAFETY_SWITCH_LED_OUT_INIT   /* PD10 */ (GPIO_INPUT|GPIO_FLOAT|GPIO_PORTD|GPIO_PIN10)
+#define GPIO_nSAFETY_SWITCH_LED_OUT        /* PD10 */ (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTD|GPIO_PIN10)
+
+/* Enable the FMU to control it if there is no px4io fixme:This should be BOARD_SAFETY_LED(__ontrue) */
+#define GPIO_LED_SAFETY GPIO_nSAFETY_SWITCH_LED_OUT
+
+#define GPIO_SAFETY_SWITCH_IN              /* PF5 */ (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTF|GPIO_PIN5)
+/* Enable the FMU to use the switch it if there is no px4io fixme:This should be BOARD_SAFTY_BUTTON() */
+#define GPIO_BTN_SAFETY GPIO_SAFETY_SWITCH_IN /* Enable the FMU to control it if there is no px4io */
+
+/* Power switch controls ******************************************************/
+
+#define SPEKTRUM_POWER(_on_true)           VDD_3V3_SPEKTRUM_POWER_EN(_on_true)
+
+/*
+ * ARKV6X has a separate RC_IN
+ *
+ * GPIO PPM_IN on PI5 T8CH1
+ * SPEKTRUM_RX (it's TX or RX in Bind) on UART6 PC7
+ *   Inversion is possible in the UART and can drive  GPIO PPM_IN as an output
+ */
+
+#define GPIO_PPM_IN_AS_OUT             (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTI|GPIO_PIN5)
+#define SPEKTRUM_RX_AS_GPIO_OUTPUT()   px4_arch_configgpio(GPIO_PPM_IN_AS_OUT)
+#define SPEKTRUM_RX_AS_UART()          /* Can be left as uart */
+#define SPEKTRUM_OUT(_one_true)        px4_arch_gpiowrite(GPIO_PPM_IN_AS_OUT, (_one_true))
+
+#define SDIO_SLOTNO                    0  /* Only one slot */
+#define SDIO_MINOR                     0
+
+/* SD card bringup does not work if performed on the IDLE thread because it
+ * will cause waiting.  Use either:
+ *
+ *  CONFIG_LIB_BOARDCTL=y, OR
+ *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
+ */
+
+#if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_LIB_BOARDCTL) && \
+   !defined(CONFIG_BOARD_INITTHREAD)
+#  warning SDIO initialization cannot be perfomed on the IDLE thread
+#endif
+
+/* By Providing BOARD_ADC_USB_CONNECTED (using the px4_arch abstraction)
+ * this board support the ADC system_power interface, and therefore
+ * provides the true logic GPIO BOARD_ADC_xxxx macros.
+ */
+#define BOARD_ADC_USB_CONNECTED (px4_arch_gpioread(GPIO_OTGFS_VBUS))
+#define BOARD_ADC_USB_VALID     (!px4_arch_gpioread(GPIO_nVDD_USB_VALID))
+
+/* ARKV6X never powers off the Servo rail */
+
+#define BOARD_ADC_SERVO_VALID     (1)
+
+#if !defined(BOARD_HAS_LTC44XX_VALIDS) || BOARD_HAS_LTC44XX_VALIDS == 0
+#  define BOARD_ADC_BRICK1_VALID  (1)
+#  define BOARD_ADC_BRICK2_VALID  (0)
+#elif BOARD_HAS_LTC44XX_VALIDS == 1
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (0)
+#elif BOARD_HAS_LTC44XX_VALIDS == 2
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#elif BOARD_HAS_LTC44XX_VALIDS == 3
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
+#elif BOARD_HAS_LTC44XX_VALIDS == 4
+#  define BOARD_ADC_BRICK1_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK1_VALID))
+#  define BOARD_ADC_BRICK2_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK2_VALID))
+#  define BOARD_ADC_BRICK3_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK3_VALID))
+#  define BOARD_ADC_BRICK4_VALID  (!px4_arch_gpioread(GPIO_nVDD_BRICK4_VALID))
+#else
+#  error Unsupported BOARD_HAS_LTC44XX_VALIDS value
+#endif
+
+#define BOARD_ADC_PERIPH_5V_OC  (!px4_arch_gpioread(GPIO_VDD_5V_PERIPH_nOC))
+#define BOARD_ADC_HIPOWER_5V_OC (!px4_arch_gpioread(GPIO_VDD_5V_HIPOWER_nOC))
+
+
+/* This board provides a DMA pool and APIs */
+#define BOARD_DMA_ALLOC_POOL_SIZE 5120
+
+/* This board provides the board_on_reset interface */
+
+#define BOARD_HAS_ON_RESET 1
+
+#if defined(TRACE_PINS)
+#define GPIO_TRACE                          \
+	GPIO_TRACECLK1,                           \
+	GPIO_TRACED0,                             \
+	GPIO_TRACED1,                             \
+	GPIO_TRACED2,                             \
+	GPIO_TRACED3
+#else
+#define GPIO_TRACE (GPIO_OUTPUT|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN2)
+#endif
+
+#define PX4_GPIO_INIT_LIST { \
+		GPIO_TRACE,                       \
+		PX4_ADC_GPIO,                     \
+		GPIO_HW_VER_REV_DRIVE,            \
+		GPIO_CAN1_TX,                     \
+		GPIO_CAN1_RX,                     \
+		GPIO_CAN2_TX,                     \
+		GPIO_CAN2_RX,                     \
+		GPIO_HEATER_OUTPUT,               \
+		GPIO_nPOWER_IN_A,                 \
+		GPIO_nPOWER_IN_B,                 \
+		GPIO_nPOWER_IN_C,                 \
+		GPIO_VDD_5V_PERIPH_nEN,           \
+		GPIO_VDD_5V_PERIPH_nOC,           \
+		GPIO_VDD_5V_HIPOWER_nEN,          \
+		GPIO_VDD_5V_HIPOWER_nOC,          \
+		GPIO_VDD_3V3_SENSORS4_EN,         \
+		GPIO_VDD_3V3_SPEKTRUM_POWER_EN,   \
+		GPIO_VDD_3V3_SD_CARD_EN,          \
+		GPIO_PD15,                        \
+		GPIO_SYNC,                        \
+		SPI6_nRESET_EXTERNAL1,            \
+		GPIO_ETH_POWER_EN,                \
+		GPIO_NFC_GPIO,                    \
+		GPIO_TONE_ALARM_IDLE,             \
+		GPIO_nSAFETY_SWITCH_LED_OUT_INIT, \
+		GPIO_SAFETY_SWITCH_IN,            \
+		GPIO_PG6,                         \
+		GPIO_nARMED_INIT                  \
+	}
+
+#define BOARD_ENABLE_CONSOLE_BUFFER
+
+#define PX4_I2C_BUS_MTD      4,5
+
+
+#define BOARD_NUM_IO_TIMERS 5
+
+__BEGIN_DECLS
+
+/****************************************************************************************************
+ * Public Types
+ ****************************************************************************************************/
+
+/****************************************************************************************************
+ * Public data
+ ****************************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************************************
+ * Public Functions
+ ****************************************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void);
+
+/****************************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the PX4FMU board.
+ *
+ ****************************************************************************************************/
+
+extern void stm32_spiinitialize(void);
+
+extern void stm32_usbinitialize(void);
+
+extern void board_peripheral_reset(int ms);
+
+#include <px4_platform_common/board_common.h>
+
+#endif /* __ASSEMBLY__ */
+
+__END_DECLS

boards/ark/fmu-v6x/src/bootloader_main.c

@@ -0,0 +1,75 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file bootloader_main.c
+ *
+ * FMU-specific early startup code for bootloader
+*/
+
+#include "board_config.h"
+#include "bl.h"
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+#include <px4_platform_common/init.h>
+
+extern int sercon_main(int c, char **argv);
+
+__EXPORT void board_on_reset(int status) {}
+
+__EXPORT void stm32_boardinitialize(void)
+{
+	/* configure USB interfaces */
+	stm32_usbinitialize();
+}
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	return 0;
+}
+
+void board_late_initialize(void)
+{
+	sercon_main(0, NULL);
+}
+
+extern void sys_tick_handler(void);
+void board_timerhook(void)
+{
+	sys_tick_handler();
+}

boards/ark/fmu-v6x/src/can.c

@@ -0,0 +1,142 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file can.c
+ *
+ * Board-specific CAN functions.
+ */
+
+#if !defined(CONFIG_CAN)
+
+#include <stdint.h>
+
+#include "board_config.h"
+
+
+__EXPORT
+uint16_t board_get_can_interfaces(void)
+{
+	uint16_t enabled_interfaces = 0x3;
+
+	if (!PX4_MFT_HW_SUPPORTED(PX4_MFT_CAN2)) {
+		enabled_interfaces &= ~(1 << 1);
+	}
+
+	return enabled_interfaces;
+}
+
+#else
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/can/can.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "arm_arch.h"
+
+#include "chip.h"
+#include "stm32_can.h"
+#include "board_config.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+/* Configuration ********************************************************************/
+
+#if defined(CONFIG_STM32_CAN1) && defined(CONFIG_STM32_CAN2)
+#  warning "Both CAN1 and CAN2 are enabled.  Assuming only CAN1."
+#  undef CONFIG_STM32_CAN2
+#endif
+
+#ifdef CONFIG_STM32_CAN1
+#  define CAN_PORT 1
+#else
+#  define CAN_PORT 2
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+int can_devinit(void);
+
+/************************************************************************************
+ * Name: can_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/can.
+ *
+ ************************************************************************************/
+
+int can_devinit(void)
+{
+	static bool initialized = false;
+	struct can_dev_s *can;
+	int ret;
+
+	/* Check if we have already initialized */
+
+	if (!initialized) {
+		/* Call stm32_caninitialize() to get an instance of the CAN interface */
+
+		can = stm32_caninitialize(CAN_PORT);
+
+		if (can == NULL) {
+			canerr("ERROR:  Failed to get CAN interface\n");
+			return -ENODEV;
+		}
+
+		/* Register the CAN driver at "/dev/can0" */
+
+		ret = can_register("/dev/can0", can);
+
+		if (ret < 0) {
+			canerr("ERROR: can_register failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Now we are initialized */
+
+		initialized = true;
+	}
+
+	return OK;
+}
+#endif /* CONFIG_CAN */

boards/ark/fmu-v6x/src/hw_config.h

@@ -0,0 +1,128 @@
+/*
+ * hw_config.h
+ *
+ *  Created on: May 17, 2015
+ *      Author: david_s5
+ */
+
+#ifndef HW_CONFIG_H_
+#define HW_CONFIG_H_
+
+/****************************************************************************
+ * 10-8--2016:
+ *  To simplify the ripple effect on the tools, we will be using
+ *  /dev/serial/by-id/<asterisk>PX4<asterisk> to locate PX4 devices. Therefore
+ *  moving forward all Bootloaders must contain the prefix "PX4 BL "
+ *  in the USBDEVICESTRING
+ *  This Change will be made in an upcoming BL release
+ ****************************************************************************/
+/*
+ * Define usage to configure a bootloader
+ *
+ *
+ * Constant                example          Usage
+ * APP_LOAD_ADDRESS     0x08004000            - The address in Linker Script, where the app fw is org-ed
+ * BOOTLOADER_DELAY     5000                  - Ms to wait while under USB pwr or bootloader request
+ * BOARD_FMUV2
+ * INTERFACE_USB        1                     - (Optional) Scan and use the USB interface for bootloading
+ * INTERFACE_USART      1                     - (Optional) Scan and use the Serial interface for bootloading
+ * USBDEVICESTRING      "PX4 BL FMU v2.x"     - USB id string
+ * USBPRODUCTID         0x0011                - PID Should match defconfig
+ * BOOT_DELAY_ADDRESS   0x000001a0            - (Optional) From the linker script from Linker Script to get a custom
+ *                                               delay provided by an APP FW
+ * BOARD_TYPE           9                     - Must match .prototype boad_id
+ * _FLASH_KBYTES        (*(uint16_t *)0x1fff7a22) - Run time flash size detection
+ * BOARD_FLASH_SECTORS  ((_FLASH_KBYTES == 0x400) ? 11 : 23) - Run time determine the physical last sector
+ * BOARD_FLASH_SECTORS   11                   - Hard coded zero based last sector
+ * BOARD_FLASH_SIZE     (_FLASH_KBYTES*1024)-   Total Flash size of device, determined at run time.
+ *                         (1024 * 1024)      - Hard coded Total Flash of device - The bootloader and app reserved will be deducted
+ *                                              programmatically
+ *
+ * BOARD_FIRST_FLASH_SECTOR_TO_ERASE  2        - Optional sectors index in the flash_sectors table  (F4 only), to begin erasing.
+ *                                               This is to allow sectors to be reserved for app fw usage. That will NOT be erased
+ *                                               during a FW upgrade.
+ *                                               The default is 0, and selects the first sector to be erased, as the 0th entry in the
+ *                                               flash_sectors table. Which is the second physical sector of FLASH in the device.
+ *                                               The first physical sector of FLASH is used by the bootloader, and is not defined
+ *                                               in the table.
+ *
+ * APP_RESERVATION_SIZE (BOARD_FIRST_FLASH_SECTOR_TO_ERASE * 16 * 1024) - Number of bytes reserved by the APP FW. This number plus
+ *                                                                        BOOTLOADER_RESERVATION_SIZE  will be deducted from
+ *                                                                        BOARD_FLASH_SIZE to determine the size of the App FW
+ *                                                                        and hence the address space of FLASH to erase and program.
+ * USBMFGSTRING            "PX4 AP"            - Optional USB MFG string (default is '3D Robotics' if not defined.)
+ * SERIAL_BREAK_DETECT_DISABLED                -  Optional prevent break selection on Serial port from entering or staying in BL
+ *
+ * * Other defines are somewhat self explanatory.
+ */
+
+/* Boot device selection list*/
+#define USB0_DEV       0x01
+#define SERIAL0_DEV    0x02
+#define SERIAL1_DEV    0x04
+
+#define APP_LOAD_ADDRESS               0x08020000
+#define BOOTLOADER_DELAY               5000
+#define INTERFACE_USB                  1
+#define INTERFACE_USB_CONFIG           "/dev/ttyACM0"
+#define BOARD_VBUS                     MK_GPIO_INPUT(GPIO_OTGFS_VBUS)
+
+//#define USE_VBUS_PULL_DOWN
+#define INTERFACE_USART                1
+#define INTERFACE_USART_CONFIG         "/dev/ttyS0,115200"
+#define BOOT_DELAY_ADDRESS             0x000001a0
+#define BOARD_TYPE                     57
+#define _FLASH_KBYTES                  (*(uint32_t *)0x1FF1E880)
+#define BOARD_FLASH_SECTORS            (15)
+#define BOARD_FLASH_SIZE               (_FLASH_KBYTES * 1024)
+
+#define OSC_FREQ                       16
+
+#define BOARD_PIN_LED_ACTIVITY         GPIO_nLED_BLUE // BLUE
+#define BOARD_PIN_LED_BOOTLOADER       GPIO_nLED_GREEN // GREEN
+#define BOARD_LED_ON                   0
+#define BOARD_LED_OFF                  1
+
+#define SERIAL_BREAK_DETECT_DISABLED   1
+
+/*
+ * Uncommenting this allows to force the bootloader through
+ * a PWM output pin. As this can accidentally initialize
+ * an ESC prematurely, it is not recommended. This feature
+ * has not been used and hence defaults now to off.
+ *
+ * # define BOARD_FORCE_BL_PIN_OUT         (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN14)
+ * # define BOARD_FORCE_BL_PIN_IN          (GPIO_INPUT|GPIO_PULLUP|GPIO_PORTE|GPIO_PIN11)
+ *
+ * # define BOARD_POWER_PIN_OUT           (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_2MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN4)
+ * # define BOARD_POWER_ON                 1
+ * # define BOARD_POWER_OFF                0
+ * # undef  BOARD_POWER_PIN_RELEASE        // Leave pin enabling Power - un comment to release (disable power)
+ *
+*/
+
+#if !defined(ARCH_SN_MAX_LENGTH)
+# define ARCH_SN_MAX_LENGTH 12
+#endif
+
+#if !defined(APP_RESERVATION_SIZE)
+#  define APP_RESERVATION_SIZE 0
+#endif
+
+#if !defined(BOARD_FIRST_FLASH_SECTOR_TO_ERASE)
+#  define BOARD_FIRST_FLASH_SECTOR_TO_ERASE 1
+#endif
+
+#if !defined(USB_DATA_ALIGN)
+# define USB_DATA_ALIGN
+#endif
+
+#ifndef BOOT_DEVICES_SELECTION
+#  define BOOT_DEVICES_SELECTION USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#ifndef BOOT_DEVICES_FILTER_ONUSB
+#  define BOOT_DEVICES_FILTER_ONUSB USB0_DEV|SERIAL0_DEV|SERIAL1_DEV
+#endif
+
+#endif /* HW_CONFIG_H_ */

boards/ark/fmu-v6x/src/i2c.cpp

@@ -0,0 +1,41 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/i2c_hw_description.h>
+
+constexpr px4_i2c_bus_t px4_i2c_buses[I2C_BUS_MAX_BUS_ITEMS] = {
+	initI2CBusExternal(1),
+	initI2CBusExternal(2),
+	initI2CBusExternal(3),
+	initI2CBusInternal(4),
+};

boards/ark/fmu-v6x/src/init.c

@@ -0,0 +1,282 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2012-2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file init.c
+ *
+ * ARKFMU-specific early startup code.  This file implements the
+ * board_app_initialize() function that is called early by nsh during startup.
+ *
+ * Code here is run before the rcS script is invoked; it should start required
+ * subsystems and perform board-specific initialization.
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include "board_config.h"
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/config.h>
+#include <nuttx/board.h>
+#include <nuttx/spi/spi.h>
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+#include <nuttx/analog/adc.h>
+#include <nuttx/mm/gran.h>
+#include <chip.h>
+#include <stm32_uart.h>
+#include <arch/board/board.h>
+#include "arm_internal.h"
+
+#include <drivers/drv_hrt.h>
+#include <drivers/drv_board_led.h>
+#include <systemlib/px4_macros.h>
+#include <px4_arch/io_timer.h>
+#include <px4_platform_common/init.h>
+#include <px4_platform_common/px4_manifest.h>
+#include <px4_platform/gpio.h>
+#include <px4_platform/board_determine_hw_info.h>
+#include <px4_platform/board_dma_alloc.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+__END_DECLS
+
+
+/************************************************************************************
+ * Name: board_peripheral_reset
+ *
+ * Description:
+ *
+ ************************************************************************************/
+__EXPORT void board_peripheral_reset(int ms)
+{
+	/* set the peripheral rails off */
+
+	VDD_5V_PERIPH_EN(false);
+	board_control_spi_sensors_power(false, 0xffff);
+	VDD_3V3_SENSORS4_EN(false);
+
+	bool last = READ_VDD_3V3_SPEKTRUM_POWER_EN();
+	/* Keep Spektum on to discharge rail*/
+	VDD_3V3_SPEKTRUM_POWER_EN(false);
+
+	/* wait for the peripheral rail to reach GND */
+	usleep(ms * 1000);
+	syslog(LOG_DEBUG, "reset done, %d ms\n", ms);
+
+	/* re-enable power */
+
+	/* switch the peripheral rail back on */
+	VDD_3V3_SPEKTRUM_POWER_EN(last);
+	board_control_spi_sensors_power(true, 0xffff);
+	VDD_3V3_SENSORS4_EN(true);
+	VDD_5V_PERIPH_EN(true);
+
+}
+
+/************************************************************************************
+ * Name: board_on_reset
+ *
+ * Description:
+ * Optionally provided function called on entry to board_system_reset
+ * It should perform any house keeping prior to the rest.
+ *
+ * status - 1 if resetting to boot loader
+ *          0 if just resetting
+ *
+ ************************************************************************************/
+__EXPORT void board_on_reset(int status)
+{
+	for (int i = 0; i < DIRECT_PWM_OUTPUT_CHANNELS; ++i) {
+		px4_arch_configgpio(PX4_MAKE_GPIO_INPUT(io_timer_channel_get_as_pwm_input(i)));
+	}
+
+	if (status >= 0) {
+		up_mdelay(6);
+	}
+}
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+__EXPORT void
+stm32_boardinitialize(void)
+{
+	board_on_reset(-1); /* Reset PWM first thing */
+
+	/* configure LEDs */
+
+	board_autoled_initialize();
+
+	/* configure pins */
+
+	const uint32_t gpio[] = PX4_GPIO_INIT_LIST;
+	px4_gpio_init(gpio, arraySize(gpio));
+
+	/* configure USB interfaces */
+
+	stm32_usbinitialize();
+
+	VDD_3V3_ETH_POWER_EN(true);
+
+}
+
+/****************************************************************************
+ * Name: board_app_initialize
+ *
+ * Description:
+ *   Perform application specific initialization.  This function is never
+ *   called directly from application code, but only indirectly via the
+ *   (non-standard) boardctl() interface using the command BOARDIOC_INIT.
+ *
+ * Input Parameters:
+ *   arg - The boardctl() argument is passed to the board_app_initialize()
+ *         implementation without modification.  The argument has no
+ *         meaning to NuttX; the meaning of the argument is a contract
+ *         between the board-specific initalization logic and the the
+ *         matching application logic.  The value cold be such things as a
+ *         mode enumeration value, a set of DIP switch switch settings, a
+ *         pointer to configuration data read from a file or serial FLASH,
+ *         or whatever you would like to do with it.  Every implementation
+ *         should accept zero/NULL as a default configuration.
+ *
+ * Returned Value:
+ *   Zero (OK) is returned on success; a negated errno value is returned on
+ *   any failure to indicate the nature of the failure.
+ *
+ ****************************************************************************/
+
+__EXPORT int board_app_initialize(uintptr_t arg)
+{
+	/* Power on Interfaces */
+	VDD_3V3_SD_CARD_EN(true);
+	VDD_5V_PERIPH_EN(true);
+	VDD_5V_HIPOWER_EN(true);
+	VDD_3V3_SENSORS4_EN(true);
+	VDD_3V3_SPEKTRUM_POWER_EN(true);
+
+	/* Need hrt running before using the ADC */
+
+	px4_platform_init();
+
+	// Use the default HW_VER_REV(0x0,0x0) for Ramtron
+
+	stm32_spiinitialize();
+
+	/* Configure the HW based on the manifest */
+
+	px4_platform_configure();
+
+	if (OK == board_determine_hw_info()) {
+		syslog(LOG_INFO, "[boot] Rev 0x%1x : Ver 0x%1x %s\n", board_get_hw_revision(), board_get_hw_version(),
+		       board_get_hw_type_name());
+
+	} else {
+		syslog(LOG_ERR, "[boot] Failed to read HW revision and version\n");
+	}
+
+	/* Configure the Actual SPI interfaces (after we determined the HW version)  */
+
+	stm32_spiinitialize();
+
+	board_spi_reset(10, 0xffff);
+
+	/* Configure the DMA allocator */
+
+	if (board_dma_alloc_init() < 0) {
+		syslog(LOG_ERR, "[boot] DMA alloc FAILED\n");
+	}
+
+#if defined(SERIAL_HAVE_RXDMA)
+	// set up the serial DMA polling at 1ms intervals for received bytes that have not triggered a DMA event.
+	static struct hrt_call serial_dma_call;
+	hrt_call_every(&serial_dma_call, 1000, 1000, (hrt_callout)stm32_serial_dma_poll, NULL);
+#endif
+
+	/* initial LED state */
+	drv_led_start();
+	led_off(LED_RED);
+	led_on(LED_GREEN); // Indicate Power.
+	led_off(LED_BLUE);
+
+	if (board_hardfault_init(2, true) != 0) {
+		led_on(LED_RED);
+	}
+
+	// Ensure Power is off for > 10 mS
+	usleep(15 * 1000);
+	VDD_3V3_SD_CARD_EN(true);
+	usleep(500 * 1000);
+
+#ifdef CONFIG_MMCSD
+	int ret = stm32_sdio_initialize();
+
+	if (ret != OK) {
+		led_on(LED_RED);
+		return ret;
+	}
+
+#endif /* CONFIG_MMCSD */
+
+	return OK;
+}

boards/ark/fmu-v6x/src/led.c

@@ -0,0 +1,235 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2013 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file led.c
+ *
+ * ARKFMU LED backend.
+ */
+
+#include <px4_platform_common/px4_config.h>
+
+#include <stdbool.h>
+
+#include "chip.h"
+#include "stm32_gpio.h"
+#include "board_config.h"
+
+#include <nuttx/board.h>
+#include <arch/board/board.h>
+
+/*
+ * Ideally we'd be able to get these from arm_internal.h,
+ * but since we want to be able to disable the NuttX use
+ * of leds for system indication at will and there is no
+ * separate switch, we need to build independent of the
+ * CONFIG_ARCH_LEDS configuration switch.
+ */
+__BEGIN_DECLS
+extern void led_init(void);
+extern void led_on(int led);
+extern void led_off(int led);
+extern void led_toggle(int led);
+__END_DECLS
+
+#ifdef CONFIG_ARCH_LEDS
+static bool nuttx_owns_leds = true;
+//                                B  R  S  G
+//                                0  1  2  3
+static const uint8_t xlatpx4[] = {1, 2, 4, 0};
+#  define xlat(p) xlatpx4[(p)]
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_GREEN,   // Indexed by BOARD_LED_GREEN
+	GPIO_nLED_BLUE,    // Indexed by BOARD_LED_BLUE
+	GPIO_nLED_RED,     // Indexed by BOARD_LED_RED
+	GPIO_nSAFETY_SWITCH_LED_OUT,  // Indexed by LED_SAFETY by xlatpx4
+};
+
+#else
+
+#  define xlat(p) (p)
+static uint32_t g_ledmap[] = {
+	GPIO_nLED_BLUE,                     // Indexed by LED_BLUE
+	GPIO_nLED_RED,                      // Indexed by LED_RED, LED_AMBER
+	0,                                  // Indexed by LED_SAFETY (defaulted to an input)
+	GPIO_nLED_GREEN,                    // Indexed by LED_GREEN
+};
+
+#endif
+
+__EXPORT void led_init(void)
+{
+	for (size_t l = 0; l < (sizeof(g_ledmap) / sizeof(g_ledmap[0])); l++) {
+		if (g_ledmap[l] != 0) {
+			stm32_configgpio(g_ledmap[l]);
+		}
+	}
+}
+
+static void phy_set_led(int led, bool state)
+{
+	/* Drive Low to switch on */
+
+	if (g_ledmap[led] != 0) {
+		stm32_gpiowrite(g_ledmap[led], !state);
+	}
+}
+
+static bool phy_get_led(int led)
+{
+	/* If Low it is on */
+	if (g_ledmap[led] != 0) {
+		return !stm32_gpioread(g_ledmap[led]);
+	}
+
+	return false;
+}
+
+__EXPORT void led_on(int led)
+{
+	phy_set_led(xlat(led), true);
+}
+
+__EXPORT void led_off(int led)
+{
+	phy_set_led(xlat(led), false);
+}
+
+__EXPORT void led_toggle(int led)
+{
+	phy_set_led(xlat(led), !phy_get_led(xlat(led)));
+}
+
+#ifdef CONFIG_ARCH_LEDS
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_autoled_initialize
+ ****************************************************************************/
+
+void board_autoled_initialize(void)
+{
+	led_init();
+}
+
+/****************************************************************************
+ * Name: board_autoled_on
+ ****************************************************************************/
+
+void board_autoled_on(int led)
+{
+	if (!nuttx_owns_leds) {
+		return;
+	}
+
+	switch (led) {
+	default:
+		break;
+
+	case LED_HEAPALLOCATE:
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_IRQSENABLED:
+		phy_set_led(BOARD_LED_BLUE, false);
+		phy_set_led(BOARD_LED_GREEN, true);
+		break;
+
+	case LED_STACKCREATED:
+		phy_set_led(BOARD_LED_GREEN, true);
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_INIRQ:
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_SIGNAL:
+		phy_set_led(BOARD_LED_GREEN, true);
+		break;
+
+	case LED_ASSERTION:
+		phy_set_led(BOARD_LED_RED, true);
+		phy_set_led(BOARD_LED_BLUE, true);
+		break;
+
+	case LED_PANIC:
+		phy_set_led(BOARD_LED_RED, true);
+		break;
+
+	case LED_IDLE : /* IDLE */
+		phy_set_led(BOARD_LED_RED, true);
+		break;
+	}
+}
+
+/****************************************************************************
+ * Name: board_autoled_off
+ ****************************************************************************/
+
+void board_autoled_off(int led)
+{
+	if (!nuttx_owns_leds) {
+		return;
+	}
+
+	switch (led) {
+	default:
+		break;
+
+	case LED_SIGNAL:
+		phy_set_led(BOARD_LED_GREEN, false);
+		break;
+
+	case LED_INIRQ:
+		phy_set_led(BOARD_LED_BLUE, false);
+		break;
+
+	case LED_ASSERTION:
+		phy_set_led(BOARD_LED_RED, false);
+		phy_set_led(BOARD_LED_BLUE, false);
+		break;
+
+	case LED_PANIC:
+		phy_set_led(BOARD_LED_RED, false);
+		break;
+
+	case LED_IDLE : /* IDLE */
+		phy_set_led(BOARD_LED_RED, false);
+		break;
+	}
+}
+
+#endif /* CONFIG_ARCH_LEDS */

boards/ark/fmu-v6x/src/manifest.c

@@ -0,0 +1,223 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file manifest.c
+ *
+ * This module supplies the interface to the manifest of hardware that is
+ * optional and dependent on the HW REV and HW VER IDs
+ *
+ * The manifest allows the system to know whether a hardware option
+ * say for example the PX4IO is an no-pop option vs it is broken.
+ *
+ */
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <board_config.h>
+
+#include <inttypes.h>
+#include <stdbool.h>
+#include <syslog.h>
+
+#include "systemlib/px4_macros.h"
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+typedef struct {
+	uint32_t                hw_ver_rev; /* the version and revision */
+	const px4_hw_mft_item_t *mft;       /* The first entry */
+	uint32_t                entries;    /* the lenght of the list */
+} px4_hw_mft_list_entry_t;
+
+typedef px4_hw_mft_list_entry_t *px4_hw_mft_list_entry;
+#define px4_hw_mft_list_uninitialized (px4_hw_mft_list_entry) -1
+
+static const px4_hw_mft_item_t device_unsupported = {0, 0, 0};
+
+// List of components on a specific board configuration
+// The index of those components is given by the enum (px4_hw_mft_item_id_t)
+// declared in board_common.h
+static const px4_hw_mft_item_t hw_mft_list_v0600[] = {
+	{
+		//  PX4_MFT_PX4IO
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+	{
+		// PX4_MFT_USB
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+	{
+		// PX4_MFT_CAN2
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+};
+
+static const px4_hw_mft_item_t hw_mft_list_v0610[] = {
+	{
+		//  PX4_MFT_PX4IO
+		.present     = 0,
+		.mandatory   = 0,
+		.connection  = px4_hw_con_unknown,
+	},
+	{
+		// PX4_MFT_USB
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+	{
+		// PX4_MFT_CAN2
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+};
+
+static const px4_hw_mft_item_t hw_mft_list_v0640[] = {
+	{
+		//  PX4_MFT_PX4IO
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+	{
+		// PX4_MFT_USB
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+	{
+		// PX4_MFT_CAN2
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+};
+
+static const px4_hw_mft_item_t hw_mft_list_v0650[] = {
+	{
+		//  PX4_MFT_PX4IO
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_unknown,
+	},
+	{
+		// PX4_MFT_USB
+		.present     = 1,
+		.mandatory   = 1,
+		.connection  = px4_hw_con_onboard,
+	},
+	{
+		// PX4_MFT_CAN2
+		.present     = 0,
+		.mandatory   = 0,
+		.connection  = px4_hw_con_unknown,
+	},
+};
+
+
+static px4_hw_mft_list_entry_t mft_lists[] = {
+//  ver_rev
+	{ARKV6X00, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)},
+	{ARKV6X01, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2
+	{ARKV6X03, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 3
+	//{ARKV6X40, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, //                       HB CM4 base           // never shipped
+	//{ARKV6X41, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // BMP388 moved to I2C2  HB CM4 base           // never shipped
+	{ARKV6X43, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // BMP388 moved to I2C2, HB CM4 base Sensor Set 3
+	{ARKV6X44, hw_mft_list_v0640, arraySize(hw_mft_list_v0640)}, // BMP388 moved to I2C2, HB CM4 base Sensor Set 4
+	{ARKV6X50, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // ARKV6X Rev 0 with HB Mini Rev 5
+	//{ARKV6X51, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2  HB Mini               // never shipped
+	{ARKV6X53, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2, HB Mini Sensor Set 3
+	{ARKV6X54, hw_mft_list_v0650, arraySize(hw_mft_list_v0650)}, // BMP388 moved to I2C2, HB Mini Sensor Set 4
+	{ARKV6X10, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO
+	{ARKV6X13, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 3
+	{ARKV6X04, hw_mft_list_v0600, arraySize(hw_mft_list_v0600)}, // BMP388 moved to I2C2, Sensor Set 4
+	{ARKV6X14, hw_mft_list_v0610, arraySize(hw_mft_list_v0610)}, // No PX4IO BMP388 moved to I2C2, Sensor Set 4
+};
+
+/************************************************************************************
+ * Name: board_query_manifest
+ *
+ * Description:
+ *   Optional returns manifest item.
+ *
+ * Input Parameters:
+ *   manifest_id - the ID for the manifest item to retrieve
+ *
+ * Returned Value:
+ *   0 - item is not in manifest => assume legacy operations
+ *   pointer to a manifest item
+ *
+ ************************************************************************************/
+
+__EXPORT px4_hw_mft_item board_query_manifest(px4_hw_mft_item_id_t id)
+{
+	static px4_hw_mft_list_entry boards_manifest = px4_hw_mft_list_uninitialized;
+
+	if (boards_manifest == px4_hw_mft_list_uninitialized) {
+		uint32_t ver_rev = board_get_hw_version() << 16;
+		ver_rev |= board_get_hw_revision();
+
+		for (unsigned i = 0; i < arraySize(mft_lists); i++) {
+			if (mft_lists[i].hw_ver_rev == ver_rev) {
+				boards_manifest = &mft_lists[i];
+				break;
+			}
+		}
+
+		if (boards_manifest == px4_hw_mft_list_uninitialized) {
+			syslog(LOG_ERR, "[boot] Board %08" PRIx32 " is not supported!\n", ver_rev);
+		}
+	}
+
+	px4_hw_mft_item rv = &device_unsupported;
+
+	if (boards_manifest != px4_hw_mft_list_uninitialized &&
+	    id < boards_manifest->entries) {
+		rv = &boards_manifest->mft[id];
+	}
+
+	return rv;
+}

boards/ark/fmu-v6x/src/mtd.cpp

@@ -0,0 +1,128 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <nuttx/spi/spi.h>
+#include <px4_platform_common/px4_manifest.h>
+//                                                              KiB BS    nB
+static const px4_mft_device_t spi5 = {             // FM25V02A on FMUM 32K 512 X 64
+	.bus_type = px4_mft_device_t::SPI,
+	.devid    = SPIDEV_FLASH(0)
+};
+static const px4_mft_device_t i2c3 = {             // 24LC64T on Base  8K 32 X 256
+	.bus_type = px4_mft_device_t::I2C,
+	.devid    = PX4_MK_I2C_DEVID(3, 0x51)
+};
+static const px4_mft_device_t i2c4 = {             // 24LC64T on IMU   8K 32 X 256
+	.bus_type =  px4_mft_device_t::I2C,
+	.devid    =  PX4_MK_I2C_DEVID(4, 0x50)
+};
+
+
+static const px4_mtd_entry_t fmum_fram = {
+	.device = &spi5,
+	.npart = 2,
+	.partd = {
+		{
+			.type = MTD_PARAMETERS,
+			.path = "/fs/mtd_params",
+			.nblocks = 32
+		},
+		{
+			.type = MTD_WAYPOINTS,
+			.path = "/fs/mtd_waypoints",
+			.nblocks = 32
+
+		}
+	},
+};
+
+static const px4_mtd_entry_t base_eeprom = {
+	.device = &i2c3,
+	.npart = 2,
+	.partd = {
+		{
+			.type = MTD_MFT,
+			.path = "/fs/mtd_mft",
+			.nblocks = 248
+		},
+		{
+			.type = MTD_NET,
+			.path = "/fs/mtd_net",
+			.nblocks = 8 // 256 = 32 * 8
+
+		}
+	},
+};
+
+static const px4_mtd_entry_t imu_eeprom = {
+	.device = &i2c4,
+	.npart = 2,
+	.partd = {
+		{
+			.type = MTD_CALDATA,
+			.path = "/fs/mtd_caldata",
+			.nblocks = 248
+		},
+		{
+			.type = MTD_ID,
+			.path = "/fs/mtd_id",
+			.nblocks = 8 // 256 = 32 * 8
+		}
+	},
+};
+
+static const px4_mtd_manifest_t board_mtd_config = {
+	.nconfigs   = 3,
+	.entries = {
+		&fmum_fram,
+		&base_eeprom,
+		&imu_eeprom
+	}
+};
+
+static const px4_mft_entry_s mtd_mft = {
+	.type = MTD,
+	.pmft = (void *) &board_mtd_config,
+};
+
+static const px4_mft_s mft = {
+	.nmft = 1,
+	.mfts = {
+		&mtd_mft
+	}
+};
+
+const px4_mft_s *board_get_manifest(void)
+{
+	return &mft;
+}

boards/ark/fmu-v6x/src/sdio.c

@@ -0,0 +1,177 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2014, 2016 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <board_config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+
+#include "chip.h"
+#include "board_config.h"
+#include "stm32_gpio.h"
+#include "stm32_sdmmc.h"
+
+#ifdef CONFIG_MMCSD
+
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/* Card detections requires card support and a card detection GPIO */
+
+#define HAVE_NCD   1
+#if !defined(GPIO_SDMMC1_NCD)
+#  undef HAVE_NCD
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static FAR struct sdio_dev_s *sdio_dev;
+#ifdef HAVE_NCD
+static bool g_sd_inserted = 0xff; /* Impossible value */
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_ncd_interrupt
+ *
+ * Description:
+ *   Card detect interrupt handler.
+ *
+ ****************************************************************************/
+
+#ifdef HAVE_NCD
+static int stm32_ncd_interrupt(int irq, FAR void *context)
+{
+	bool present;
+
+	present = !stm32_gpioread(GPIO_SDMMC1_NCD);
+
+	if (sdio_dev && present != g_sd_inserted) {
+		sdio_mediachange(sdio_dev, present);
+		g_sd_inserted = present;
+	}
+
+	return OK;
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void)
+{
+	int ret;
+
+#ifdef HAVE_NCD
+	/* Card detect */
+
+	bool cd_status;
+
+	/* Configure the card detect GPIO */
+
+	stm32_configgpio(GPIO_SDMMC1_NCD);
+
+	/* Register an interrupt handler for the card detect pin */
+
+	stm32_gpiosetevent(GPIO_SDMMC1_NCD, true, true, true, stm32_ncd_interrupt);
+#endif
+
+	/* Mount the SDIO-based MMC/SD block driver */
+	/* First, get an instance of the SDIO interface */
+
+	finfo("Initializing SDIO slot %d\n", SDIO_SLOTNO);
+
+	sdio_dev = sdio_initialize(SDIO_SLOTNO);
+
+	if (!sdio_dev) {
+		syslog(LOG_ERR, "[boot] Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
+		return -ENODEV;
+	}
+
+	/* Now bind the SDIO interface to the MMC/SD driver */
+
+	finfo("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
+
+	ret = mmcsd_slotinitialize(SDIO_MINOR, sdio_dev);
+
+	if (ret != OK) {
+		syslog(LOG_ERR, "[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+		return ret;
+	}
+
+	finfo("Successfully bound SDIO to the MMC/SD driver\n");
+
+#ifdef HAVE_NCD
+	/* Use SD card detect pin to check if a card is g_sd_inserted */
+
+	cd_status = !stm32_gpioread(GPIO_SDMMC1_NCD);
+	finfo("Card detect : %d\n", cd_status);
+
+	sdio_mediachange(sdio_dev, cd_status);
+#else
+	/* Assume that the SD card is inserted.  What choice do we have? */
+
+	sdio_mediachange(sdio_dev, true);
+#endif
+
+	return OK;
+}
+
+#endif /* CONFIG_MMCSD */

boards/ark/fmu-v6x/src/spi.cpp

@@ -0,0 +1,86 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2022 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/spi_hw_description.h>
+#include <drivers/drv_sensor.h>
+#include <nuttx/spi/spi.h>
+
+constexpr px4_spi_bus_all_hw_t px4_spi_buses_all_hw[BOARD_NUM_SPI_CFG_HW_VERSIONS] = {
+	initSPIHWVersion(ARKV6X00, {
+		initSPIBus(SPI::Bus::SPI1, {
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+		}, {GPIO::PortI, GPIO::Pin11}),
+		initSPIBus(SPI::Bus::SPI2, {
+			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+		}, {GPIO::PortF, GPIO::Pin4}),
+		initSPIBus(SPI::Bus::SPI3, {
+			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
+		}, {GPIO::PortE, GPIO::Pin7}),
+		//  initSPIBus(SPI::Bus::SPI4, {
+		//    // no devices
+		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
+		//  }, {GPIO::PortG, GPIO::Pin8}),
+		initSPIBus(SPI::Bus::SPI5, {
+			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
+		}),
+		initSPIBusExternal(SPI::Bus::SPI6, {
+			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
+			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
+		}),
+	}),
+
+	initSPIHWVersion(ARKV6X01, { // Placeholder
+		initSPIBus(SPI::Bus::SPI1, {
+			initSPIDevice(DRV_IMU_DEVTYPE_IIM42652, SPI::CS{GPIO::PortI, GPIO::Pin9}, SPI::DRDY{GPIO::PortF, GPIO::Pin2}),
+		}, {GPIO::PortI, GPIO::Pin11}),
+		initSPIBus(SPI::Bus::SPI2, {
+			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortH, GPIO::Pin5}, SPI::DRDY{GPIO::PortA, GPIO::Pin10}),
+		}, {GPIO::PortF, GPIO::Pin4}),
+		initSPIBus(SPI::Bus::SPI3, {
+			initSPIDevice(DRV_IMU_DEVTYPE_ICM42688P, SPI::CS{GPIO::PortI, GPIO::Pin4}, SPI::DRDY{GPIO::PortI, GPIO::Pin6}),
+		}, {GPIO::PortE, GPIO::Pin7}),
+		//  initSPIBus(SPI::Bus::SPI4, {
+		//    // no devices
+		// TODO: if enabled, remove GPIO_VDD_3V3_SENSORS4_EN from board_config.h
+		//  }, {GPIO::PortG, GPIO::Pin8}),
+		initSPIBus(SPI::Bus::SPI5, {
+			initSPIDevice(SPIDEV_FLASH(0), SPI::CS{GPIO::PortG, GPIO::Pin7})
+		}),
+		initSPIBusExternal(SPI::Bus::SPI6, {
+			initSPIConfigExternal(SPI::CS{GPIO::PortI, GPIO::Pin10}, SPI::DRDY{GPIO::PortD, GPIO::Pin11}),
+			initSPIConfigExternal(SPI::CS{GPIO::PortA, GPIO::Pin15}, SPI::DRDY{GPIO::PortD, GPIO::Pin12}),
+		}),
+	}),
+};
+
+static constexpr bool unused = validateSPIConfig(px4_spi_buses_all_hw);

boards/ark/fmu-v6x/src/timer_config.cpp

@@ -0,0 +1,80 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2012 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#include <px4_arch/io_timer_hw_description.h>
+
+/* Timer allocation
+ *
+ * TIM5_CH4  T FMU_CH1
+ * TIM5_CH3  T FMU_CH2
+ * TIM5_CH2  T FMU_CH3
+ * TIM5_CH1  T FMU_CH4
+ *
+ * TIM4_CH2  T FMU_CH5
+ * TIM4_CH3  T FMU_CH6
+ *
+ * TIM12_CH1 T FMU_CH7
+ * TIM12_CH2 T FMU_CH8
+ *
+ * TIM1_CH2  T FMU_CAP1               < Capture
+ * TIM1_CH3  T SPI2_DRDY2_ISM330_INT2 < Capture or GPIO INT
+ * TIM1_CH1  T SPIX_SYNC              > Pulse or GPIO strobe
+ *
+ * TIM2_CH3  T HEATER                 > PWM OUT or GPIO
+ *
+ * TIM14_CH1 T BUZZER_1              - Driven by other driver
+ * TIM8_CH1_IN T FMU_PPM_INPUT       - Sampled byt HRT by other driver
+ */
+
+constexpr io_timers_t io_timers[MAX_IO_TIMERS] = {
+	initIOTimer(Timer::Timer5, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer4, DMA{DMA::Index1}),
+	initIOTimer(Timer::Timer12),
+	initIOTimer(Timer::Timer1),
+	initIOTimer(Timer::Timer2),
+};
+
+constexpr timer_io_channels_t timer_io_channels[MAX_TIMER_IO_CHANNELS] = {
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel4}, {GPIO::PortI, GPIO::Pin0}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel3}, {GPIO::PortH, GPIO::Pin12}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel2}, {GPIO::PortH, GPIO::Pin11}),
+	initIOTimerChannel(io_timers, {Timer::Timer5, Timer::Channel1}, {GPIO::PortH, GPIO::Pin10}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel2}, {GPIO::PortD, GPIO::Pin13}),
+	initIOTimerChannel(io_timers, {Timer::Timer4, Timer::Channel3}, {GPIO::PortD, GPIO::Pin14}),
+	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel1}, {GPIO::PortH, GPIO::Pin6}),
+	initIOTimerChannel(io_timers, {Timer::Timer12, Timer::Channel2}, {GPIO::PortH, GPIO::Pin9}),
+	initIOTimerChannelCapture(io_timers, {Timer::Timer1, Timer::Channel2}, {GPIO::PortE, GPIO::Pin11}),
+};
+
+constexpr io_timers_channel_mapping_t io_timers_channel_mapping =
+	initIOTimerChannelMapping(io_timers, timer_io_channels);

boards/ark/fmu-v6x/src/usb.c

@@ -0,0 +1,105 @@
+/****************************************************************************
+ *
+ *   Copyright (C) 2016 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/**
+ * @file usb.c
+ *
+ * Board-specific USB functions.
+ */
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <px4_platform_common/px4_config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include <arm_arch.h>
+#include <chip.h>
+#include <stm32_gpio.h>
+#include <stm32_otg.h>
+#include "board_config.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called to setup USB-related GPIO pins for the ARKFMU board.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbinitialize(void)
+{
+	/* The OTG FS has an internal soft pull-up */
+
+	/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32H7_OTGFS
+	stm32_configgpio(GPIO_OTGFS_VBUS);
+#endif
+}
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+	uinfo("resume: %d\n", resume);
+}

boards/beaglebone/blue/default.px4board

@@ -78,7 +78,6 @@ CONFIG_EXAMPLES_DYN_HELLO=y
 CONFIG_EXAMPLES_FAKE_GPS=y
 CONFIG_EXAMPLES_FAKE_IMU=y
 CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
-CONFIG_EXAMPLES_FIXEDWING_CONTROL=y
 CONFIG_EXAMPLES_HELLO=y
 CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
 CONFIG_EXAMPLES_PX4_SIMPLE_APP=y

boards/bitcraze/crazyflie/syslink/syslink_main.cpp

@@ -548,6 +548,9 @@ Syslink::handle_raw(syslink_message_t *sys)
 		rc.values[3] = cmd->thrust * 1000 / USHRT_MAX + 1000;
 		rc.values[4] = 1000; // Dummy channel as px4 needs at least 5
 
+		rc.link_quality = -1;
+		rc.rssi_dbm = NAN;
+
 		_rc_pub.publish(rc);
 
 	} else if (c->port == CRTP_PORT_MAVLINK) {

boards/cubepilot/cubeorange/default.px4board

@@ -23,7 +23,6 @@ CONFIG_DRIVERS_IRLOCK=y
 CONFIG_COMMON_LIGHT=y
 CONFIG_COMMON_MAGNETOMETER=y
 CONFIG_COMMON_OPTICAL_FLOW=y
-CONFIG_DRIVERS_OSD=y
 CONFIG_DRIVERS_PCA9685_PWM_OUT=y
 CONFIG_DRIVERS_POWER_MONITOR_INA226=y
 CONFIG_DRIVERS_PWM_INPUT=y

boards/emlid/navio2/default.px4board

@@ -81,7 +81,6 @@ CONFIG_EXAMPLES_DYN_HELLO=y
 CONFIG_EXAMPLES_FAKE_GPS=y
 CONFIG_EXAMPLES_FAKE_IMU=y
 CONFIG_EXAMPLES_FAKE_MAGNETOMETER=y
-CONFIG_EXAMPLES_FIXEDWING_CONTROL=y
 CONFIG_EXAMPLES_HELLO=y
 CONFIG_EXAMPLES_PX4_MAVLINK_DEBUG=y
 CONFIG_EXAMPLES_PX4_SIMPLE_APP=y

boards/emlid/navio2/navio_sysfs_rc_in/NavioSysRCInput.cpp

@@ -152,6 +152,9 @@ void NavioSysRCInput::Run()
 	data.timestamp_last_signal = timestamp_sample;
 	data.channel_count = CHANNELS;
 	data.input_source = input_rc_s::RC_INPUT_SOURCE_PX4FMU_PPM;
+	data.link_quality = -1;
+	data.rssi_dbm = NAN;
+
 	data.timestamp = hrt_absolute_time();
 
 	_input_rc_pub.publish(data);

boards/flywoo/gn-f405/bootloader/flywoo_gnf405_bl_15d91db.hex

@@ -0,0 +1,616 @@
+:020000040800F2
+:1000000000000220811B00087F1B00087D1B0008E8
+:100010007D1B00087D1B00087D1B00080000000000
+:100020000000000000000000000000007F1B00082E
+:100030007F1B0008000000007F1B0008B9020008B9
+:100040007D1B00087D1B00087D1B00087D1B000830
+:100050007D1B00087D1B00087D1B00087D1B000820
+:100060007D1B00087D1B00087D1B00087D1B000810
+:100070007D1B00087D1B00087D1B00087D1B000800
+:100080007D1B00087D1B00087D1B00087D1B0008F0
+:100090007D1B00087D1B00087D1B00087D1B0008E0
+:1000A0007D1B00087D1B00087D1B00087D1B0008D0
+:1000B0007D1B00087D1B00087D1B00087D1B0008C0
+:1000C0007D1B00087D1B00087D1B00087D1B0008B0
+:1000D0007D1B00087D1B00087D1B00087D1B0008A0
+:1000E0007D1B00087D1B00087D1B00087D1B000890
+:1000F0007D1B00087D1B00087D1B00087D1B000880
+:100100007D1B00087D1B00087D1B00087D1B00086F
+:100110007D1B00087D1B00087D1B00087D1B00085F
+:100120007D1B00087D1B00087D1B00087D1B00084F
+:100130007D1B00087D1B00087D1B00087D1B00083F
+:100140007D1B00087D1B00087D1B00082908000896
+:100150007D1B00087D1B00087D1B00087D1B00081F
+:100160007D1B00087D1B00087D1B00087D1B00080F
+:100170007D1B00087D1B00087D1B00087D1B0008FF
+:100180007D1B00087D1B00087D1B00087D1B0008EF
+:100190007D1B00087D1B00087D1B00087D1B0008DF
+:1001A0007D1B00087D1B00087D1B0008022901D172
+:1001B00000F042BB7047000010B5084C237813F0E4
+:1001C000FD0F02D04FF0FF3010BDC307FAD500F08D
+:1001D000B5FB0028F6DB02236370F5E7580000202A
+:1001E00010B5064C606000F0CBFBFFF7E5FF002880
+:1001F00002DA6368002BF6D110BD00BFE8070020CB
+:1002000008B5FFF7EDFFA0F120035842584108BDA3
+:10021000034B1B78022B01D100F09ABB704700BF43
+:1002200058000020054B596810B54A1C9C68D2B292
+:1002300094421EBFC9185A60087310BD58000020B0
+:10024000064AD2E901138B421FBFD1180133DBB23A
+:10025000087B14BF93604FF0FF30704758000020B8
+:1002600038B5124C236801331ED0114D2A68A242C2
+:100270001AD3104B9B6803F1006303F500439A42C5
+:1002800012D200F0D7FB00F0A9FB00F037FB00F022
+:10029000ADFB00F077FB204600F0D0FB23682A6816
+:1002A00083F308881047FEE738BD00BF00800008D0
+:1002B000048000080C0000200D4A10B500231446ED
+:1002C00052F8231021B152F82310013942F82310BB
+:1002D0000133042BF4D1074B93F80C3133B9A368E5
+:1002E00023B9022000F080FC3223A36010BD00BFC0
+:1002F000E807002058000020024BD860DA68002A86
+:10030000FCD17047E80700202DE9F04FBF4DDFF822
+:100310000483DFF81093D8F808408BB00026074616
+:100320002E70029600F046FB0FB1C9F8007085F8F8
+:100330000C61C9F808604FF0FF36012000F046FC60
+:1003400027B1D9F80030002B00F0F8810020FFF72A
+:1003500047FF0390039B002BF2DB012000F028FCF9
+:10036000039B213B102BE8D801A252F823F000BFD9
+:10037000B5030008E5030008510400083B0300082A
+:100380003B0300083B030008C90400083B030008C6
+:100390006F0500082D06000877060008CB06000848
+:1003A0003B030008EB0600083B03000819070008A0
+:1003B000C90300080220FFF723FF002800F0D881BE
+:1003C000029B43F0010302932B780BB96B782B70DF
+:1003D00041F21203022105A8ADF814300027FFF7FF
+:1003E00017FFAAE74FF47A70FFF7FAFEB0F1000AA0
+:1003F000C0F2BE810220FFF703FF002800F0B881A1
+:100400000AF1FF30042800F2B381DFE800F0030BAB
+:100410000E1114007E480421FFF7FAFE029B43F000
+:100420000203D0E77B480421F6E77B480421F3E789
+:100430007A480421F0E71C27384600F015FB043702
+:100440000590042105A8FFF7E3FE2C2FF4D1E5E782
+:100450000220FFF7D5FE002800F08A81029B03F0FE
+:100460000303032B40F084810123022085F80C3123
+:1004700000F09EFB00F0E0FA4FF0000A504600F05A
+:10048000E3FA044690B9022085F80C0100F09EFBC7
+:10049000D8F80830A3420FD8029B002443F004038D
+:1004A000029385F80C41C9F808408DE7504600F0EA
+:1004B000E5FA0AF1010AE1E7204600F0D5FA013039
+:1004C00040F04D810434E3E73220FFF789FEB0F1BC
+:1004D000000BC0F24D811BF0030240F04981D8F8B7
+:1004E00008000BEB0401814200F24281BBF5807FE2
+:1004F00000F23E81DFF830A151465A4516D1C8209E
+:10050000FFF77EFE002800F033812CB94FF0FF3258
+:10051000D5F81061C5F810212BF0030303EB040B91
+:100520005C4515D1029B43F008034CE74FF47A7009
+:10053000CDE90021FFF754FE039003980028C0F294
+:1005400017810199009A039801F8010B0132D4E751
+:10055000DAF80010204600F081FA204600F084FA14
+:100560005AF8042B904240F0FA800434D8E7022075
+:10057000FFF746FE002800F0FB800027BA4631E076
+:10058000002F3DD1711C3BD00596D5F81422C2B97D
+:1005900023481346082103F0010C5B08BCF1000F4F
+:1005A00007D083F06D4383F4380383F4034383F06F
+:1005B00020030139EFD10132B2F5807F40F8043BCE
+:1005C000E7D105A9002211F8013B83EA0A03DBB257
+:1005D00005EB83030132D3F81032042A83EA1A2A86
+:1005E000F1D10437D8F80830BB42C9D8042105A896
+:1005F000CDF814A0FFF70CFE029B43F01003E2E6D7
+:10060000384600F031FA0590BFE700BF58000020DF
+:10061000DC2300080C000020100000201400002043
+:1006200068020020E80700206801002005AB4FF0B9
+:10063000000B9A4664200093FFF7D2FD0028C0F219
+:100640009780009B0BF1010BBBF1040F03F8010B2A
+:10065000F0D1059B00930220FFF7D2FD002800F0A7
+:100660008780009B184600F031FA594605905046A5
+:10067000FFF7CEFDA8E605AB4FF0000B9A466420CD
+:100680000093FFF7ADFD002872DB009B0BF1010B1F
+:10069000BBF1040F03F8010BF1D1059B009302207D
+:1006A000FFF7AEFD002863D0009B9A0760D1082BAE
+:1006B0005ED8184600F076FA594605905046FFF786
+:1006C000A7FD029B43F040037DE60220FFF798FD63
+:1006D00000284DD000F00AFA0421059005A8FFF784
+:1006E00097FD029B43F080036DE60220FFF788FD33
+:1006F00000283DD005A9142000F0FEF9042107468A
+:10070000049004A8FFF784FD394605A8FFF780FD93
+:10071000029B43F4807356E64FF47A70FFF770FD46
+:1007200030B3731C0DD141F2120305A80221ADF8BC
+:100730001430FFF76DFD6420FFF7DEFD0BB0BDE860
+:10074000F08F029B03F01B031B2B11D131460020BD
+:1007500000F084F9002000F087F98642E3D041F2EE
+:100760001213022105A8ADF81430FFF751FDE4E59E
+:1007700041F21233022105A8ADF81430FFF748FD0D
+:1007800000230293D9E500BF4978212909D0222905
+:1007900009D0202909D11888062894BF00200120FB
+:1007A0007047034B1360012070470020704700BF63
+:1007B000F423000837B5104B00930446002540236E
+:1007C0000222012100F00CFD204600954023022268
+:1007D000822100F005FD204600951023032283218D
+:1007E00000F0FEFC054B7F222121204603B0BDE82E
+:1007F000304001F099B800BF0108000889070008DF
+:1008000030B591B040236A46012100F011FD00246B
+:100810000546AC4201D311B030BD1DF80400FFF70E
+:1008200001FD0134F5E70000024B186808B100F043
+:10083000CDBC7047680600201FB52648264C012114
+:1008400000F070FC2548802100F06CFC4FF4C05390
+:1008500023480022022100F087FB21484FF4C052B8
+:100860000A2100F0BCFB1F4A1F48136843F4001321
+:1008700013601E4B1B68B3F5005F01BF4FF0A04231
+:10088000136843F0C00313608023194A0293231DA9
+:100890000193032302F10D010093164B00F06EFC4F
+:1008A0001549206000F0FEFE104B1B68B3F5005F99
+:1008B0000AD10C4A136843F404131360D2F8CC37FE
+:1008C00023F00203C2F8CC37432004B0BDE8104047
+:1008D00001F0D4B9303802406806002034380240B4
+:1008E0000000024038000050B82500083C000050CD
+:1008F000FB23000800000020B507000810B50C4CD1
+:10090000432001F0C9F9206820B1012100F062FC08
+:10091000002323600022074811464FF4C05300F023
+:1009200023FBBDE810400448802100F0FFBB00BF5E
+:10093000680600200000024034380240034B1B6868
+:100940000BB1FFF77DBC4FF0FF3070476806002009
+:1009500070B50A4E326805460C4662B970BD402C2F
+:10096000234628BF40232A4630689BB2822100F0EC
+:1009700057FC241A0544002CF1D1EFE7680600204B
+:1009800007207047002208B511463023064800F0C2
+:10099000EBFA06484FF0805100F0C8FB044B4FF4CF
+:1009A00080121A6008BD00BF0004024040380240B7
+:1009B0003038024008B5042001F034F9064BDB68FA
+:1009C0004FF47A70584301F025F901F037F9BDE88A
+:1009D000084001F043B900BF0C00002008B501F049
+:1009E00035F9BDE8084001F041B9000010B5042018
+:1009F00000F0ACF9042000F0A1F90A4B00241C60BF
+:100A0000032000F0CFF9204600F0CCF900F0F6F911
+:100A1000054B064A1A60032000F09CFB044B1C6047
+:100A200010BD00BF083802400438024010300024D6
+:100A30000C38024000F01ABB00F006BB014B1860F6
+:100A4000704700BF08ED00E00A289DBF024B03EB92
+:100A5000C000406800207047D024000800F100600A
+:100A600000F5004000F01EBB830703BF00F10060EB
+:100A700000F500400068002070470000431E092B6D
+:100A800070B502460AD8104C01230025934206D1C6
+:100A900004EBC20300215E68B14206D370BD04EBD3
+:100AA000C301013349680D44F0E76818FFF7DCFF24
+:100AB000013001D10431EFE714F832000221BDE822
+:100AC000704000F007BB00BFD024000810F0030303
+:100AD00009D1B0F5007F04D800F10050A0F508401E
+:100AE0000368184670470023FBE70000014B1868B5
+:100AF000704700BF002004E0284B1A68284B2DE9FE
+:100B0000F041C2F30B0C5F691D7E0446120C0020FD
+:100B10004FF00C0E10330EFB00F636F80380E04564
+:100B200029D133445F681D7A42F201039A4226D0EC
+:100B3000B2F5805F25D041F201039A4223D041F201
+:100B400003039A4221D041F207039A4208BF31259C
+:100B5000621E0A447C1E0B4693421CD214F8016F9D
+:100B6000581CA6B92C2482421C7001D9981C5D70B7
+:100B7000401ABDE8F08101300428CCD1D4E73325F8
+:100B8000E6E74125E4E75A25E2E75925E0E700F8E2
+:100B9000016C0346E0E71846EAE700BF002004E0E6
+:100BA0000C000020014BC058704700BF107AFF1F97
+:100BB000012802D0022804D070472021024800F00A
+:100BC000C7B91021FAE700BF00040240012802D093
+:100BD000022804D070472021024800F0B7B9102144
+:100BE000FAE700BF00040240012802D0022804D026
+:100BF00070472021024800F0AEB91021FAE700BF8B
+:100C0000000402402C4A2D4838B5136843F47003A1
+:100C100013602B4B6FF07F0200245A7202210F22C7
+:100C20009A721C72DC7200F07DFA2648302322464C
+:100C3000012100F099F9302322462248214600F094
+:100C4000B3F92048302100F083F94FF080511E485D
+:100C500000F068FA1D4800F023F91D4B1D481A6882
+:100C600042F480721A601C4A116841F4004111601C
+:100C70000568196821F48071196018498D4217D1EF
+:100C8000196841F480711960116841F400411160E4
+:100C900004601A6822F480721A6002210020FFF7B3
+:100CA00085FA2046FFF730FB0024FFF7D9FAF8E772
+:100CB00041F28834F1E700BF88ED00E030380240AF
+:100CC0000C00002000040240403802408825000843
+:100CD00000700040502800407038024007B007B054
+:100CE000062822D8DFE800F004171C090E131500AF
+:100CF0000F4B1868C0F3406070470D4B1868C0F385
+:100D0000404070470A4B1868C0F340007047094BD9
+:100D1000F9E7094BF7E7064B1868C0F340707047D6
+:100D2000034B1868C0F3C06070470020704700BFD5
+:100D300000380240703802407438024008B502465C
+:100D40001046FFF7CDFF0028FAD008BD06280AD8C4
+:100D5000DFE800F004181D0A0F1416000E4A13688D
+:100D600043F08073136070470B4A136843F4803379
+:100D7000F8E7094A136843F00103F3E7074AF9E784
+:100D8000074AF7E7044A136843F08053EAE7024A48
+:100D9000136843F08063E5E7003802407038024092
+:100DA0007438024006280AD8DFE800F004181D0A4B
+:100DB0000F1416000E4A136823F0807313607047F7
+:100DC0000B4A136823F48033F8E7094A136823F0C9
+:100DD0000103F3E7074AF9E7074AF7E7044A13680C
+:100DE00023F08053EAE7024A136823F08063E5E7C3
+:100DF000003802407038024074380240024A1368DA
+:100E000023F400231360704700380240034A13683C
+:100E100023F0030318431060704700BF08380240F6
+:100E2000034A136823F4604343EA4030106070477C
+:100E300008380240034A136823F4E05343EA802051
+:100E40001060704708380240034A136823F0F0032B
+:100E500043EA0010106070470838024010B5029C49
+:100E6000022C38BF022424071B0603F0706304F031
+:100E7000E04452081C4300F03F0047F6C073013ABB
+:100E800003EA8111044312040C4302F44032034B81
+:100E9000144344F480041C6010BD00BF04380240B9
+:100EA00013B504460420FFF751FF0420FFF746FF67
+:100EB0000020FFF7ABFF0320FFF748FF0320FFF7F9
+:100EC0003DFFE07B002835D100F0F4FE207BFFF7EA
+:100ED000BBFF607BFFF7AEFFA07BFFF7A1FFA3790D
+:100EE00061882279207800936379FFF7B7FF124A6F
+:100EF000136843F0807313600020FFF71FFFA068A2
+:100F000000F098F80220FFF781FF0C4A1368C3F342
+:100F10008103022BFAD10A4B22691A60094B6269DC
+:100F20001A60A269084B04201A6002B0BDE81040A4
+:100F3000FFF738BF0120C7E70038024008380240F9
+:100F40004C000020500000205400002081617047B8
+:100F5000090481617047436901EA030221EA030140
+:100F600041EA0241816170472DE9F0410568C4689A
+:100F700000264FF0030E43FA06F7FF070DD5770062
+:100F80000EFA07FC01FA07F825EA0C0524EA0C041E
+:100F900002FA07F748EA05053C430136102EEAD16C
+:100FA0000560C460BDE8F081012941680CBF1943A8
+:100FB0009943F0B5416081680024032643FA04F5A3
+:100FC000ED0707D5650006FA05F721EA070102FAE1
+:100FD00005F529430134102CF0D18160F0BDF0B546
+:100FE000076A466A00234FF00F0C42FA03F4E50744
+:100FF00007D59D000CFA05F427EA040701FA05F568
+:101000002F430133082BF0D14FF00F0C42FA03F4B9
+:10101000E40708D59C00203C0CFA04F526EA0506F6
+:1010200001FA04F426430133102BEFD10762466224
+:10103000F0BD0000034A136823F007031843106053
+:10104000704700BF003C0240054A136843F000436C
+:101050001360044B044A1A6002F188321A60704728
+:10106000103C0240043C024023016745024A1368D9
+:1010700043F0004313607047103C0240024A13687B
+:10108000DB03FCD4704700BF0C3C0240044B1968E2
+:1010900021F4407119601A6842EA00201860704714
+:1010A000103C024070B50A4C0E460546FFF7E6FFBD
+:1010B0000220FFF7EBFF236843F0010323602E605B
+:1010C000FFF7DCFF236823F00103236070BD00BF3E
+:1010D000103C024037B5124C01910546FFF7CEFF98
+:1010E0000198FFF7D3FF236823F0F80323602368F8
+:1010F000ED00EDB21D432560236843F00203236039
+:10110000236843F480332360FFF7B8FF236823F09C
+:1011100002032360236823F0F803236003B030BD8B
+:10112000103C02400368194301607047036823EADA
+:10113000010101607047430903F1804303F50E3359
+:1011400000F01F001968012202FA00F0084318603D
+:1011500070470000032802D0052806D07047054AD2
+:10116000136823F4802313607047034A136823F045
+:101170000403F8E700380240703802402DE9F041DE
+:101180001E4603680546884617469847069BC36077
+:10119000079B0361BDF820308382094B0367094B2D
+:1011A000C366094B83660023C0E90087C0E9323378
+:1011B000C0E93433C0F8DC508660BDE8F08100BF80
+:1011C00055190008C5190008471A0008D0F8DC3086
+:1011D0005B6A1847D0F8DC309B6A03B11847704748
+:1011E00010B4D0F8DC40A468A4465DF8044B604716
+:1011F00013B503680021C1820446DB7900910A46D9
+:10120000FFF7EEFFD4F8DC3000215B6820469847FA
+:10121000E3691BB102B0BDE81040184702B010BD31
+:1012200010B4D0F8DC40E469A4465DF8044B604794
+:1012300010B4D0F8DC40246AA4465DF8044B604743
+:10124000D0F8DC301B691847D0F8DC309B691847B0
+:10125000D0F8DC305B69184710B50B7873B94C884F
+:101260007F2C0CD8D0F8DC30847593F830201AB17C
+:1012700049885B68C9B29847012300E000231846FB
+:1012800010BDF8B50D464988044679B103680D26AE
+:10129000587C0023984201D80020F8BD626806FB04
+:1012A000032252798A4203D00133F3E74FF0FF3330
+:1012B0000133DBB2E3754BB9D4F8DC302046DB6890
+:1012C0009847D4F8C830ABB90120E6E70D226FF09B
+:1012D0000C0112FB031263681344002210461979B3
+:1012E0009142E9D9D3F809101601715801B108707B
+:1012F0000132F4E70023A3642365A365236604F1A8
+:10130000C80604F1D80756F8043B13B16988204693
+:101310009847B742F7D1D7E719881268012984BFE7
+:1013200001211980C37D2BB141680D2000FB0313FF
+:1013300013F8083C13700120704770B5C67D4068F3
+:101340006FF00C050D2414FB065420448D8804799D
+:10135000A5420CD201241C808B88D0F809001B0107
+:101360001B5803B11B7812680120137070BD002058
+:10137000FCE71988022984BF022119801168002323
+:101380000B70126801205370704710B514461A880C
+:10139000022A84BF02221A808988C9B2FFF754FF4B
+:1013A0002368003818BF01201870236800225A7083
+:1013B000012010BD08B589880122C9B2FFF740FF9E
+:1013C000012008BD08B589880022C9B2FFF738FF9F
+:1013D000012008BD70B5C27D0D241D466FF00C03C1
+:1013E00014FB023344688A881C442379934219D938
+:1013F000D4F809404B88160104EB021212799A4284
+:1014000010D9A25952B11370D0F8D83013B14A880C
+:101410008988984700232B80012070BD002BF3D0D2
+:101420001046FAE70020F8E72DE9F04F4D881F46F7
+:101430002B0A022B89B0144611D0032B00F0ED804B
+:10144000012B40F0218102682260127839888A429B
+:1014500028BF0A463A80012009B0BDE8F08FEDB2FE
+:1014600005EB45080369D0F80490136005EB880884
+:101470003C8819F808500293A54209EB080328BFDD
+:1014800025461946029803932A4600F099FE029BCE
+:1014900019F80880641B5E19A4B200230193039B12
+:1014A0001A79BDF804309A4204D8029BA3F802804E
+:1014B0003D80D0E7019B019A1B010593039BD3F864
+:1014C000093003EB0213D3F808A0BAF1000F14D0CF
+:1014D0009AF80090A14528BFA14630464A46514699
+:1014E00000F06EFE9AF80030A4EB09044D449844D5
+:1014F0004E44A4B2ADB21FFA88F800230493039BB4
+:10150000059AD3F809301344BDF810201979914297
+:1015100002D8019B0133C1E7049AD3F80CA015212E
+:1015200001FB02F90AEB09031AF809B00093A3457D
+:1015300028BFA346194630465A4600F041FE1AF825
+:1015400009309844009BD3F80D10A4EB0B045D44C4
+:101550005E44A4B2ADB21FFA88F8B1B1D3F811A0BD
+:10156000A245A8BFA2461FFA8AF930464A4600F0B3
+:1015700027FE009BD3F81130A4EB09044D44984496
+:101580004E44A4B2ADB21FFA88F84FF00009009B98
+:101590001A791FFA89F39A4202D8049B0133ADE706
+:1015A000009BC9EB091BD3F80930079313F80B20F4
+:1015B00003EB0B0AA24228BF224651463046069250
+:1015C00000F0FEFD079B069A13F80B30DAF80710BF
+:1015D000A41A154498441644A4B2ADB21FFA88F870
+:1015E000C1B1DAF80B20A242A8BF22461FFA82FB43
+:1015F0005A463046CDF818B000F0E2FDDAF80B306C
+:10160000069AA4EB0B045D4498441644A4B2ADB210
+:101610001FFA88F809F10109B9E715F0FF05066915
+:101620000DD10923B3700423F37033703B88042B6E
+:1016300028BF04233B800323737026600BE7836875
+:10164000013D0BB3C268AA421EDD898840F20942FF
+:10165000914219D153F82550284600F051FE01302F
+:101660004000C0B230703B88984228BF184638808E
+:1016700000233A885208013A9A42DCDD06EB430225
+:10168000E95C51800133F4E70020E5E6198802297E
+:1016900084BF02211980116800230B701268012099
+:1016A0005370704710B5002300F1C80454F8042BA0
+:1016B0002AB10133042BF9D14FF0FF3010BD323382
+:1016C00040F823101046F9E710B44C78092C13D8D1
+:1016D000DFE804F00E12121212100C120A05084C68
+:1016E000A4465DF8044B6047064CF9E7064CF7E763
+:1016F000064CF5E7064CF3E700205DF8044B704715
+:101700008312000819130008291400087313000835
+:101710005912000810B44C780A2C07D00B2C07D0B3
+:1017200044B9064CA4465DF8044B6047044CF9E705
+:10173000044CF7E700205DF8044B70478D16000855
+:101740003B130008D513000810B44C78012C04D0CA
+:10175000032C08D01CB9094C09E04C885CB100206E
+:101760005DF8044B70474C88002CF8D1044CA4461B
+:101770005DF8044B6047034CF9E700BF8B1300088A
+:10178000B5130008C513000810B40C7814F0600FEE
+:1017900012D104F01F04012C06D0022C08D05CB931
+:1017A0005DF8044BFFF790BF5DF8044BFFF7B2BF45
+:1017B0005DF8044BFFF7C8BF00205DF8044B70478D
+:1017C00010B5012204460021FFF73AFD002384F8FA
+:1017D0002C3010BD70B50368828FC48EDB79816BAD
+:1017E000A41A9C42A8BF1C46A6B20A443346002154
+:1017F0000546FFF71DFD864205D02846FFF7E0FFAE
+:101800004FF0FF3070BDAB8F1E44AE87A0B2F9E73A
+:1018100010B50368826BD979838F994204460FD241
+:101820000B460021FFF7FCFC022384F82C302368D0
+:10183000A26BD979A38F0A445B1AA263A38710BD58
+:101840000021FFF7EDFC94F84430002B14BF022375
+:10185000032384F82C30002384F84430A387A36347
+:10186000EDE72DE9F04100F1380286B00446054667
+:1018700000F1200800F13C0300F14007AE6C2EB9E6
+:10188000204606B0BDE8F041FFF77EBF087895F826
+:101890004DE095F84CC000EA0E00844503D00835B1
+:1018A0004545EBD1ECE700972046CDE904230391B1
+:1018B000B0470128DDE90312059BF0D806B0BDE86A
+:1018C000F08138B5036983638B79CA7943EA0223CF
+:1018D000838704460D46FFF7C4FF00B3EB88ABB126
+:1018E000A28F21689342C9790ED932B1B2FBF1F3CC
+:1018F00001FB1322B2FA82F2520984F844202046F6
+:10190000BDE83840FFF784BF0022F6E71A461946C3
+:101910002046FFF785FC042384F82C3038BD204690
+:10192000BDE83840FFF74CBF70B5002500F1480610
+:1019300056F835402CB10135042DF9D14FF0FF3068
+:1019400070BD00EBC50080F84C1080F84D2083641A
+:101950002046F5E770B5002500F130060446056421
+:1019600001222946FFF774FC082332462946204607
+:10197000FFF75EFC082804D02046BDE87040FFF762
+:101980001FBFE28E2AB931462046BDE87040FFF7FE
+:1019900098BF94F93030002BF5DBA38A9342EBD348
+:1019A0002369A3632368A587DB79934234BF0523AA
+:1019B000062384F82C302A4629462046BDE870408C
+:1019C000FFF746BC10B590F82C30062B044612D019
+:1019D000072B27D0052B21D1FFF7FCFE002809DBC0
+:1019E000A28FE38E9B1A2268D279934202DC0623EF
+:1019F00084F82C3010BDFFF7EDFE0028FADB04F16F
+:101A000030012046FFF72DFF38B100231A46194652
+:101A10002046FFF705FC0423EAE72046BDE8104016
+:101A2000FFF7CEBE00231A461946FFF701FC00233C
+:101A300084F82C30236C1BB104F130012046984708
+:101A400000232364D6E710B590F82C30032B04460E
+:101A500007D0042B0ED0022B23D1BDE81040FFF796
+:101A6000D7BE072380F82C300022BDE81040114675
+:101A7000FFF7EEBB036C13B100F13001984794F807
+:101A8000303053B994F83130052B06D1618ED4F83B
+:101A9000DC30C9B25B6820469847002384F82C30BC
+:101AA00010BDBDE81040FFF78BBE000008B540F246
+:101AB0008760FFF740FB254A136843F0400313603B
+:101AC000234B19461A68002AFCDA1A6842F0010210
+:101AD0001A600B68DB07FCD41E4B1F481B68B3F56C
+:101AE000005F1E4B1A682CBF42F4041242F410220D
+:101AF0001A601B4A136823F002031360A2F5FF6209
+:101B0000136843F0804343F470531360154B022273
+:101B10001A60154A136843F003031360134B002245
+:101B20001A60134A80231360A0F8E03052F81C3C7E
+:101B300043F0010342F81C3C0E4B0F4A1A600F227F
+:101B4000C3F804280122C3F8F82708BD0C00005090
+:101B5000100000503C000050EC06002038000050FF
+:101B6000040800501400005000080050000E0050FF
+:101B7000240000501800005010280480FEE7704731
+:101B8000194B1A4A1A498B421AD31A4A0021934216
+:101B90001BD3194A194C1368194D43F40073136091
+:101BA000536F43F470035367AC4211D3154C164D79
+:101BB000AC4211D3FFF726F8144C154DAC420FD3AD
+:101BC00052F8040B43F8040BDDE743F8041BDEE78F
+:101BD00054F8043B9847E7E754F8043B9847E7E795
+:101BE00054F8043B9847E9E700000020EC25000882
+:101BF00058000020F807002014ED00E0EC25000854
+:101C0000EC250008EC250008EC250008EC25000870
+:101C1000EC250008024B20F07F401860704700BFA1
+:101C200014E000E0044A136800F0040023F0040309
+:101C300003431360704700BF10E000E0024A1368DE
+:101C400043F002031360704710E000E0024A13689B
+:101C500023F002031360704710E000E0024A1368AB
+:101C600043F001031360704710E000E0024A13687C
+:101C700023F001031360704710E000E0054B4209B8
+:101C800003EB820300F01F00012202FA00F018604B
+:101C9000704700BF00E100E0054B420903EB8203FF
+:101CA00000F01F00012202FA00F01860704700BF28
+:101CB00080E100E028B9064A136843F480431360CA
+:101CC00070470128FCD1024A136803F48043F6E709
+:101CD00000700040D0F8DC30DA6AD2F8003823F423
+:101CE000FE6343EA0111C2F8001870472DE9F0477E
+:101CF000D0F8DCE0089FDEF82C5011F07F0603F0EE
+:101D00007F043ED13F2B31D9C5F80069DEF82C2085
+:101D1000C2F81049DEF82C10D1F8002942F0084230
+:101D2000C1F80029DEF82C2044F0005444F40024CB
+:101D3000C0F8E840C2F8104BDEF82C10D1F8002BA8
+:101D400042F00842C1F8002BBEF83220DEF82C1019
+:101D50009B0842EA03428A62B0F8E02013449BB237
+:101D6000A0F8E030A0F8E230BDE8F0871F2B03D9DF
+:101D70000122C5F80029C9E70F2B8CBF02220322DC
+:101D8000F7E709064FEA461C4FEA824226D5B0F82B
+:101D9000E090990806F1400849EA014A45F828A070
+:101DA0004944A0F8E010DEF82C1001F5116142EA78
+:101DB000865241F80C400CF51061DEF82C401343BC
+:101DC0000D5943F0184343F400432B430B51002FAC
+:101DD000CAD00C2303FB06008766C5E706F13A016B
+:101DE00005F5316544F4002440F8214045F80C40E5
+:101DF0000CF53061DEF82C4013430D5943F01443C9
+:101E000043F400432B430B51002FADD00C2303FBB5
+:101E10000600C766A8E7B0F8E230D0F8DC2010B5BD
+:101E2000A0F8E0304FF43263D16A58580028BEBFA2
+:101E3000585840F080405850A3F50070D16A44587B
+:101E4000002CB8BF445803F12003BCBF44F08044C9
+:101E50004450B3F5386FE7D1D36A4FF486621A6104
+:101E600010BD10B5D0F8DC40E06AF1B9D0F8003907
+:101E70005AB143F40013C0F800395831E26A4901FD
+:101E80008B5843F400138B501AE023F40013C0F86E
+:101E900000395831E26A49018B5823F400138B5002
+:101EA000E26A8B5843F08053EDE70B0613D501F03F
+:101EB0007F0348335B0122B11A5842F400121A50D2
+:101EC00010BD1A5822F400121A50E16A5A5842F012
+:101ED00080525A50F4E7002ACFD1DAE70A06D0F848
+:101EE000DC3046BF01F07F0148315831DB6A4901DF
+:101EF000C858C0F3405070470B060CD443185831F3
+:101F000083F8E420D0F8DC304901DB6A22B1CA58FA
+:101F100042F00062CA507047CA5842F08062F9E746
+:101F2000F0B5D0F8DC60F06A01F07F04610100F5E3
+:101F3000116045582D0316D443F40027475001F58E
+:101F40001061F76AC85940F004400134C8511D4679
+:101F50002403002D01DC1846F0BDF16A52F8040B91
+:101F60006050043DF5E70023F5E737B5B0F8F850C9
+:101F70009D4228BF1D46014614462B46032B1FDCFD
+:101F8000A8086FF0030303FB005302EB8000A3B12A
+:101F9000D1F8DC20B1F8F840D26A032C02F5805267
+:101FA00088BF043C126801928CBFA4B20024A1F83F
+:101FB000F8401A4601A900F003F9284603B030BDE5
+:101FC000D1F8DC00C06A00F58050043B006844F89A
+:101FD000040BB1F8F8000438A1F8F800CEE7D0F807
+:101FE000DC30DA6A2DE9F047556915F400560446ED
+:101FF00009D05B8E4FF400515161BDE8F047A0F865
+:10200000E030FFF7F5B800F168084FF00C094FF029
+:10201000010AD4F8DC30DB6A770103F60813DB59D8
+:10202000DA070ED509FB06F358F8033013B1F1B205
+:1020300020469847D4F8DC30DB6A03F6081343F8EF
+:1020400007A00136042EE4D1EB0648D5D4F8DC0015
+:10205000C36A1A6A02F4F016B6F5C02F02F00F0137
+:1020600002D0B6F5002F18D101F13A054A0103F567
+:10207000316354F825509D502144C56A91F8E4100D
+:1020800002F5306300295A5914BF4FF008414FF050
+:1020900004410A435A51BDE8F087B6F5802F73D04A
+:1020A000B6F5402FF7D14E0103F51167BF593F0335
+:1020B00040D4022001EB410303441A33C2F30A1255
+:1020C00054F82330A4F8F8200BB120469847B4F810
+:1020D000F8100023994259DC0023A4F8F8302A05AF
+:1020E00008D5236A03B19847D4F8DC30DB6A4FF493
+:1020F00000625A61002D08DA636A03B19847D4F888
+:10210000DC30DB6A4FF000425A612B0707D5A36A27
+:1021100003B19847D4F8DC30DB6A08225A61D4F85E
+:10212000DC30A26ADB6A002A38D09A6942F00802E1
+:102130009A61B0E706F5106C53F80C7047F0006731
+:1021400043F80C70C76A07F608133344D3F800E06D
+:102150001EF0400FFAD05CF807309B0DD7F810E066
+:10216000BEF1000FFADA9B0103F4707343F0200311
+:102170003B61C36A03F5116300279F51C36A1033A3
+:1021800018688006FCD494E7012093E7D4F8DC209B
+:10219000D26A02F58052043312689BE79A6922F0F2
+:1021A0000802C5E7D0F8DC30DB6AD3F8042821B197
+:1021B00042F00202C3F80428704722F00202F9E755
+:1021C000844641EA000313F003036DD1403A41D342
+:1021D00051F8043B40F8043B51F8043B40F8043B01
+:1021E00051F8043B40F8043B51F8043B40F8043BF1
+:1021F00051F8043B40F8043B51F8043B40F8043BE1
+:1022000051F8043B40F8043B51F8043B40F8043BD0
+:1022100051F8043B40F8043B51F8043B40F8043BC0
+:1022200051F8043B40F8043B51F8043B40F8043BB0
+:1022300051F8043B40F8043B51F8043B40F8043BA0
+:1022400051F8043B40F8043B51F8043B40F8043B90
+:10225000403ABDD2303211D351F8043B40F8043B30
+:1022600051F8043B40F8043B51F8043B40F8043B70
+:1022700051F8043B40F8043B103AEDD20C3205D340
+:1022800051F8043B40F8043B043AF9D2043208D038
+:10229000D2071CBF11F8013B00F8013B01D30B88AA
+:1022A00003806046704700BF082A13D38B078DD088
+:1022B00010F003038AD0C3F10403D21ADB071CBF5A
+:1022C00011F8013B00F8013B80D331F8023B20F8C4
+:1022D000023B7BE7043AD9D3013A11F8013B00F8FD
+:1022E000013BF9D20B7803704B7843708B78837085
+:1022F0006046704700000000000000000000000081
+:1023000090F800F06DE9024520F007016FF0000C35
+:1023100010F0070491F820F040F049804FF00004DD
+:102320006FF00700D1E9002391F840F000F10800B8
+:1023300082FA4CF2A4FA8CF283FA4CF3A2FA8CF3F0
+:102340004BBBD1E9022382FA4CF200F10800A4FA57
+:102350008CF283FA4CF3A2FA8CF3E3B9D1E90423AB
+:1023600082FA4CF200F10800A4FA8CF283FA4CF3E2
+:10237000A2FA8CF37BB9D1E9062301F1200182FA9C
+:102380004CF200F10800A4FA8CF283FA4CF3A2FAA2
+:102390008CF3002BC6D0002A04BF04301A4612BAB0
+:1023A000B2FA82F2FDE8024500EBD2007047D1E9B3
+:1023B000002304F00305C4F100004FEAC50514F042
+:1023C000040F91F840F00CFA05F562EA05021CBF13
+:1023D00063EA050362464FF00004A9E70500000028
+:1023E000466C79776F6F0050583420474E46343032
+:1023F0003500300000C201000000080902000002A0
+:10240000010080FA1C2400081201000202000040B2
+:10241000AC261600010101020301000000000000CB
+:10242000010000000000000051240008000000002E
+:1024300001000000000000003C2400080904010025
+:10244000020A0000007924000800000000000000DB
+:10245000000904000001020201009724000866241C
+:1024600000081300000005240010010524010001EC
+:1024700004240200052406000107050102400001B2
+:10248000000000000000000007058202400001007B
+:1024900000000000000000070583031000FF00009B
+:1024A00000000000000053544D3332463F3F3F00D0
+:1024B00053544D3332463430780053544D33324602
+:1024C0003432780053544D33324634343658580041
+:1024D0000100000000400000020000000040000079
+:1024E00003000000004000000400000000000100A4
+:1024F00005000000000002000600000000000200CD
+:1025000007000000000002000800000000000200B8
+:1025100009000000000002000A00000000000200A4
+:102520000B0000000000020010000000004000004E
+:1025300011000000004000001200000000400000F8
+:102540001300000000400000140000000000010023
+:10255000150000000000020016000000000002004C
+:102560001700000000000200180000000000020038
+:1025700019000000000002001A0000000000020024
+:102580001B000000000002000800500102070000CC
+:1025900005060000000504000000000080DE800247
+:1025A00000BD0105012033000010410001105A0058
+:1025B0000310590007103100AD1A0008D51C00089F
+:1025C000ED1C0008171E0008631E0008F91E000815
+:1025D000DD1E0008211F00086B1F0008DF1F000818
+:0C25E000A5210008000000500100800050
+:1025EC00E0230008E7230008F22300082A0000007B
+:1025FC000000000000000000A80000000000000027
+:10260C00A62400083F00000013040000B0240008BA
+:10261C003F00000019040000BA2400083F0000002D
+:10262C0021040000C42400083F0000000024F40032
+:08263C000024F4000024F40066
+:0400000508000000EF
+:00000001FF

boards/flywoo/gn-f405/default.px4board

@@ -0,0 +1,46 @@
+CONFIG_BOARD_TOOLCHAIN="arm-none-eabi"
+CONFIG_BOARD_ARCHITECTURE="cortex-m4"
+CONFIG_BOARD_CONSTRAINED_FLASH=y
+CONFIG_BOARD_NO_HELP=y
+CONFIG_BOARD_CONSTRAINED_MEMORY=y
+CONFIG_BOARD_SERIAL_URT6="/dev/ttyS2"
+CONFIG_BOARD_SERIAL_TEL2="/dev/ttyS1"
+CONFIG_DRIVERS_ADC_BOARD_ADC=y
+CONFIG_DRIVERS_BAROMETER_BMP280=y
+CONFIG_DRIVERS_DSHOT=y
+CONFIG_DRIVERS_GPS=y
+CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=n
+CONFIG_DRIVERS_IMU_INVENSENSE_MPU6000=y
+CONFIG_DRIVERS_MAGNETOMETER_QMC5883=y
+CONFIG_DRIVERS_OSD=y
+CONFIG_DRIVERS_PWM_OUT=y
+CONFIG_DRIVERS_RC_INPUT=y
+CONFIG_DRIVERS_TELEMETRY_FRSKY_TELEMETRY=n
+CONFIG_MODULES_ATTITUDE_ESTIMATOR_Q=n
+CONFIG_MODULES_EKF2=y
+CONFIG_MODULES_BATTERY_STATUS=y
+CONFIG_MODULES_COMMANDER=y
+CONFIG_MODULES_CONTROL_ALLOCATOR=y
+CONFIG_MODULES_DATAMAN=y
+CONFIG_MODULES_FLIGHT_MODE_MANAGER=y
+CONFIG_MODULES_LAND_DETECTOR=y
+CONFIG_MODULES_LOAD_MON=y
+CONFIG_MODULES_MANUAL_CONTROL=y
+CONFIG_MODULES_MAVLINK=y
+CONFIG_MODULES_MC_ATT_CONTROL=y
+CONFIG_MODULES_MC_POS_CONTROL=y
+CONFIG_MODULES_MC_RATE_CONTROL=y
+CONFIG_MODULES_NAVIGATOR=y
+CONFIG_MODULES_RC_UPDATE=y
+CONFIG_MODULES_SENSORS=y
+CONFIG_SYSTEMCMDS_HARDFAULT_LOG=y
+CONFIG_SYSTEMCMDS_TOP=y
+CONFIG_SYSTEMCMDS_DMESG=y
+CONFIG_SYSTEMCMDS_TOPIC_LISTENER=y
+CONFIG_SYSTEMCMDS_UORB=y
+CONFIG_SYSTEMCMDS_MIXER=y
+CONFIG_SYSTEMCMDS_PARAM=y
+CONFIG_SYSTEMCMDS_I2CDETECT=y
+CONFIG_SYSTEMCMDS_PWM=y
+CONFIG_SYSTEMCMDS_REBOOT=y
+CONFIG_SYSTEMCMDS_VER=y

boards/flywoo/gn-f405/firmware.prototype

@@ -0,0 +1,13 @@
+{
+    "board_id": 42,
+    "magic": "FLYWOOGNF405",
+    "description": "Firmware for the FLYWOO GNF405 board",
+    "image": "",
+    "build_time": 0,
+    "summary": "flywoo/GNF405",
+    "version": "0.1",
+    "image_size": 0,
+    "image_maxsize": 1032192,
+    "git_identity": "",
+    "board_revision": 0
+}

boards/flywoo/gn-f405/init/rc.board_defaults

@@ -0,0 +1,35 @@
+#!/bin/sh
+#
+# Flywoo GNF405 board specific defaults
+#------------------------------------------------------------------------------
+
+# default airframe quadrotor
+param set-default SYS_AUTOSTART 4001
+
+# system_power unavailable
+param set-default CBRK_SUPPLY_CHK 894281
+
+# Disable safety switch by default
+param set-default CBRK_IO_SAFETY 22027
+
+# EKF2 can be enabled when baro is avaialble and EKF2_MAG_TYPE is set to 5
+param set-default SYS_MC_EST_GROUP 2
+param set-default EKF2_MAG_TYPE 5
+param set-default SENS_BOARD_ROT 6
+
+param set-default ATT_ACC_COMP 0
+param set-default ATT_W_ACC 0.4000
+param set-default ATT_W_GYRO_BIAS 0.0000
+
+param set-default SYS_HAS_MAG 0
+
+# GPS is on Uart6
+param set-default GPS_1_CONFIG 6
+
+# Telemetry (onboard) is on Uart4
+param set-default MAV_0_CONFIG 102
+param set-default MAV_0_MODE 2
+
+# Set serial rates
+param set-default SER_TEL2_BAUD 500000
+param set-default SER_URT6_BAUD 9600

boards/flywoo/gn-f405/init/rc.board_extras

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# Flywoo GNF405 specific board extras init
+#------------------------------------------------------------------------------
+
+if ! param compare OSD_ATXXXX_CFG 0
+then
+	atxxxx start -s
+fi
+
+

boards/flywoo/gn-f405/init/rc.board_sensors

@@ -0,0 +1,11 @@
+#!/bin/sh
+#
+# Flywoo GNF405 specific board sensors init
+#------------------------------------------------------------------------------
+
+board_adc start
+
+mpu6000 -R 6 -s start
+
+# Start Baro
+bmp280 -X start

boards/flywoo/gn-f405/nuttx-config/include/board.h

@@ -0,0 +1,327 @@
+/************************************************************************************
+ * nuttx-configs/flywoo_gn-f405/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ *   Copyright (c) 2018 PX4 Development Team. All rights reserved.
+ *   Author: Nathan Tsoi <nathan@vertile.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIG_GNF405S_INCLUDE_BOARD_H
+#define __CONFIG_GNF405S_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+#include "board_dma_map.h"
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdio.h"
+#include "stm32.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The gnf405s board features a single 8MHz crystal.  Space is provided
+ * for a 32kHz RTC backup crystal, but it is not stuffed.
+ *
+ * This is the canonical configuration:
+ *   System Clock source           : PLL (HSE)
+ *   SYSCLK(Hz)                    : 168000000    Determined by PLL configuration
+ *   HCLK(Hz)                      : 168000000    (STM32_RCC_CFGR_HPRE)
+ *   AHB Prescaler                 : 1            (STM32_RCC_CFGR_HPRE)
+ *   APB1 Prescaler                : 4            (STM32_RCC_CFGR_PPRE1)
+ *   APB2 Prescaler                : 2            (STM32_RCC_CFGR_PPRE2)
+ *   HSE Frequency(Hz)             : 8000000      (STM32_BOARD_XTAL)
+ *   PLLM                          : 8            (STM32_PLLCFG_PLLM)
+ *   PLLN                          : 336          (STM32_PLLCFG_PLLN)
+ *   PLLP                          : 2            (STM32_PLLCFG_PLLP)
+ *   PLLQ                          : 7            (STM32_PLLCFG_PLLQ)
+ *   Main regulator output voltage : Scale1 mode  Needed for high speed SYSCLK
+ *   Flash Latency(WS)             : 5
+ *   Prefetch Buffer               : OFF
+ *   Instruction cache             : ON
+ *   Data cache                    : ON
+ *   Require 48MHz for USB OTG FS, : Enabled
+ *   SDIO and RNG clock
+ */
+
+/* HSI - 16 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - On-board crystal frequency is 8MHz
+ * LSE - 32.768 kHz
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE
+ * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ *         = (8,000,000 / 8) * 336
+ *         = 336,000,000
+ * SYSCLK  = PLL_VCO / PLLP
+ *         = 336,000,000 / 2 = 168,000,000
+ * USB OTG FS, SDIO and RNG Clock
+ *         =  PLL_VCO / PLLQ
+ *         = 48,000,000
+ */
+
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)
+
+#define STM32_SYSCLK_FREQUENCY  168000000ul
+
+/* AHB clock (HCLK) is SYSCLK (168MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
+ * otherwise frequency is 2xAPBx.
+ * Note: TIM1,8-11 are on APB2, others on APB1
+ */
+
+#define BOARD_TIM1_FREQUENCY    STM32_APB2_TIM1_CLKIN
+#define BOARD_TIM2_FREQUENCY    STM32_APB1_TIM2_CLKIN
+#define BOARD_TIM3_FREQUENCY    STM32_APB1_TIM3_CLKIN
+#define BOARD_TIM4_FREQUENCY    STM32_APB1_TIM4_CLKIN
+#define BOARD_TIM5_FREQUENCY    STM32_APB1_TIM5_CLKIN
+#define BOARD_TIM6_FREQUENCY    STM32_APB1_TIM6_CLKIN
+#define BOARD_TIM7_FREQUENCY    STM32_APB1_TIM7_CLKIN
+#define BOARD_TIM8_FREQUENCY    STM32_APB2_TIM8_CLKIN
+#define BOARD_TIM9_FREQUENCY    STM32_APB2_TIM9_CLKIN
+#define BOARD_TIM10_FREQUENCY   STM32_APB2_TIM10_CLKIN
+#define BOARD_TIM11_FREQUENCY   STM32_APB2_TIM11_CLKIN
+#define BOARD_TIM12_FREQUENCY   STM32_APB1_TIM12_CLKIN
+#define BOARD_TIM13_FREQUENCY   STM32_APB1_TIM13_CLKIN
+#define BOARD_TIM14_FREQUENCY   STM32_APB1_TIM14_CLKIN
+
+/* SDIO dividers.  Note that slower clocking is required when DMA is disabled
+ * in order to avoid RX overrun/TX underrun errors due to delayed responses
+ * to service FIFOs in interrupt driven mode.  These values have not been
+ * tuned!!!
+ *
+ * SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
+ */
+
+#define SDIO_INIT_CLKDIV        (118 << SDIO_CLKCR_CLKDIV_SHIFT)
+
+/* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
+ * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
+ */
+
+#ifdef CONFIG_STM32_SDIO_DMA
+#  define SDIO_MMCXFR_CLKDIV    (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_MMCXFR_CLKDIV    (2 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
+/* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
+ * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
+ */
+
+#ifdef CONFIG_STM32_SDIO_DMA
+#  define SDIO_SDXFR_CLKDIV     (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_SDXFR_CLKDIV     (2 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
+/* LED definitions ******************************************************************/
+/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
+ * way.  The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with stm32_setled() */
+
+#define BOARD_LED1        0
+//#define BOARD_LED2        1
+#define BOARD_NLEDS       1
+
+#define BOARD_LED_BLUE    BOARD_LED1
+//#define BOARD_LED_RED     BOARD_LED2
+
+/* LED bits for use with stm32_setleds() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+
+/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 2 LEDs on board the
+ * gnf405s.  The following definitions describe how NuttX controls the LEDs:
+ */
+
+#define LED_STARTED       0  /* LED1 */
+#define LED_HEAPALLOCATE  1  /* LED2 */
+#define LED_IRQSENABLED   2  /* LED1 */
+#define LED_STACKCREATED  3  /* LED1 + LED2 */
+#define LED_INIRQ         4  /* LED1 */
+#define LED_SIGNAL        5  /* LED2 */
+#define LED_ASSERTION     6  /* LED1 + LED2 */
+#define LED_PANIC         7  /* LED1 + LED2 */
+
+/* Alternate function pin selections ************************************************/
+
+/* UART1:
+ *
+ * PA10 (RX) and PA9 (TX) are broken out on J5
+ */
+
+#define GPIO_USART1_RX GPIO_USART1_RX_1
+#define GPIO_USART1_TX GPIO_USART1_TX_2
+
+/* USART3:
+ *
+ * PC10 (TX) and PC11 (RX) are broken out on J4
+ *
+ * However, this port is shared with SPI3 which contains the BMP280 and MAX7456
+ *
+ * The Silkscreen pin labeled SCL is TX
+ *                           MISO is RX
+ */
+//#define GPIO_USART3_RX	GPIO_USART3_RX_2
+//#define GPIO_USART3_TX	GPIO_USART3_TX_2
+
+/* UART4:
+ *
+ * PA0 (TX) -- Labeled RSSI on the silkscreen is only broken out on a test pad
+ *             on the pro version. It's on a 2.54mm header on other versions
+ * PA1 (RX) -- Motor 5 out
+ */
+#define GPIO_UART4_RX	GPIO_UART4_RX_1
+#define GPIO_UART4_TX	GPIO_UART4_TX_1
+
+/* UART6:
+ *
+ * PC6 (TX) and PC7 (RX) are broken out on J10
+ */
+
+#define GPIO_USART6_RX GPIO_USART6_RX_1
+#define GPIO_USART6_TX GPIO_USART6_TX_1
+
+/* SPI1:
+ *  MPU6000
+ *  CS: PA4 -- configured in board_config.h
+ *  CLK: PA5
+ *  MISO: PA6
+ *  MOSI: PA7
+ */
+
+#define GPIO_SPI1_SCK  GPIO_SPI1_SCK_1
+#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
+
+/* SPI2:
+ *  SD Card
+ *  CS: PB12 -- configured in board_config.h
+ *  CLK: PB13
+ *  MISO: PB14
+ *  MOSI: PB15
+ */
+
+#define GPIO_SPI2_SCK	  GPIO_SPI2_SCK_3
+#define GPIO_SPI2_MISO	GPIO_SPI2_MISO_3
+#define GPIO_SPI2_MOSI	GPIO_SPI2_MOSI_3
+
+/* SPI3:
+ *  BMP280
+ *  CS: PB3 -- configured in board_config.h
+ *  CLK: PC10
+ *  MISO: PC11
+ *  MOSI: PC12
+ */
+
+#define GPIO_SPI3_SCK  GPIO_SPI3_SCK_2
+#define GPIO_SPI3_MISO GPIO_SPI3_MISO_2
+#define GPIO_SPI3_MOSI GPIO_SPI3_MOSI_2
+
+/*
+ * I2C (external)
+ *
+ * SCL: PB10
+ * SDA: PB11
+ *
+ * TODO:
+ *   The optional _GPIO configurations allow the I2C driver to manually
+ *   reset the bus to clear stuck slaves.  They match the pin configuration,
+ *   but are normally-high GPIOs.
+ */
+#define GPIO_I2C1_SCL		GPIO_I2C1_SCL_2
+#define GPIO_I2C1_SDA		GPIO_I2C1_SDA_2
+
+#endif  /* __CONFIG_GNF405S_INCLUDE_BOARD_H */

boards/flywoo/gn-f405/nuttx-config/include/board_dma_map.h

@@ -0,0 +1,94 @@
+/****************************************************************************
+ *
+ *   Copyright (c) 2020 PX4 Development Team. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name PX4 nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#pragma once
+
+/*
+|    DMA1    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
+|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
+| Channel 0  | SPI3_RX_1        | -                | SPI3_RX_2        | SPI2_RX          | SPI2_TX          | SPI3_TX_1        | -                | SPI3_TX_2        |
+| Channel 1  | I2C1_RX          | -                | TIM7_UP_1        |  -               | TIM7_UP_2        | I2C1_RX_1        | I2C1_TX          | I2C1_TX_1        |
+| Channel 2  | TIM4_CH1         | -                | I2C4_RX          | TIM4_CH2         | -                | I2C4_RX          | TIM4_UP          | TIM4_CH3         |
+| Channel 3  | -                | TIM2_UP_1        | I2C3_RX_1        | I2C2_EXT_RX      | I2C3_TX          | TIM2_CH1         | TIM2_CH2         | TIM2_UP_2        |
+|            |                  |   TIM2_CH3       |                  |                  |                  |                  |   TIM2_CH4_1     |   TIM2_CH4_2     |
+| Channel 4  | UART5_RX         | USART3_RX        | UART4_RX         | USART3_TX_1      | UART4_TX         | USART2_RX        | USART2_TX        | UART5_TX         |
+| Channel 5  | UART8_TX         | UART7_TX         | TIM3_CH4         | UART7_RX         | TIM3_CH1         | TIM3_CH2         | UART8_RX         | TIM3_CH3         |
+|            |                  |                  |   TIM3_UP        |                  |   TIM3_TRIG      |                  |                  |                  |
+| Channel 6  | TIM5_CH3         | TIM5_CH4_1       | TIM5_CH1         | TIM5_CH4_2       | TIM5_CH2         | -                | TIM5_UP_2        | -                |
+|            |   TIM5_UP_1      |   TIM5_TRIG_1    |                  |   TIM5_TRIG_2    |                  |                  |                  |                  |
+| Channel 7  | -                | TIM6_UP          | I2C2_RX          | I2C2_RX_1        | USART3_TX_2      | DAC1             | DAC2             | I2C2_TX          |
+|            |                  |                  |                  |                  |                  |                  |                  |                  |
+| Usage      |                  | TIM2_UP_1        | TIM3_UP          | SPI2_RX          | SPI2_TX          |                  |                  |                  |
+
+
+|    DMA2    | Stream 0         | Stream 1         | Stream 2         | Stream 3         | Stream 4         | Stream 5         | Stream 6         | Stream 7         |
+|------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|------------------|
+| Channel 0  | ADC1_1           | SAI1_A           | TIM8_CH1_1       | SAI1_A_1         | ADC1_2           | SAI1_B_1         | TIM1_CH1_1       | -                |
+|            |                  |                  |   TIM8_CH2_1     |                  |                  |                  |   TIM1_CH2_1     |                  |
+|            |                  |                  |   TIM8_CH3_1     |                  |                  |                  |   TIM1_CH3_1     |                  |
+| Channel 1  | -                | DCMI_1           | ADC2_1           | ADC2_2           | SAI1_B           | SPI6_TX          | SPI6_RX          | DCMI_2           |
+| Channel 2  | ADC3_1           | ADC3_2           | -                | SPI5_RX_1        | SPI5_TX_1        | CRYP_OUT         | CRYP_IN          | HASH_IN          |
+| Channel 3  | SPI1_RX_1        | -                | SPI1_RX_2        | SPI1_TX_1        | -                | SPI1_TX_2        | -                | QUADSPI          |
+| Channel 4  | SPI4_RX_1        | SPI4_TX_1        | USART1_RX_1      | SDIO             | -                | USART1_RX_2      | SDIO             | USART1_TX        |
+| Channel 5  | -                | USART6_RX_1      | USART6_RX_2      | SPI4_RX_2        | SPI4_TX_2        | -                | USART6_TX_1      | USART6_TX_2      |
+| Channel 6  | TIM1_TRIG_1      | TIM1_CH1_2       | TIM1_CH2_2       | TIM1_CH1         | TIM1_CH4         | TIM1_UP          | TIM1_CH3_2       | -                |
+|            |                  |                  |                  |                  |   TIM1_TRIG_2    |                  |                  |                  |
+|            |                  |                  |                  |                  |   TIM1_COM       |                  |                  |                  |
+| Channel 7  | -                | TIM8_UP          | TIM8_CH1_2       | TIM8_CH2_2       | TIM8_CH3_2       | SPI5_RX_2        | SPI5_TX_2        | TIM8_CH4         |
+|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_TRIG      |
+|            |                  |                  |                  |                  |                  |                  |                  |   TIM8_COM       |
+|            |                  |                  |                  |                  |                  |                  |                  |                  |
+| Usage      | SPI1_RX_1        | USART6_RX_1      | USART1_RX_1      | SPI1_TX_1        |                  |                  | SDIO             |                  |
+ */
+
+// DMA1 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+//      AVAILABLE                             // DMA2, Stream 0
+//      DMAMAP_TIM2_UP                        // DMA1, Stream 1, Channel 3    (DSHOT)
+//      DMAMAP_TIM3_UP                        // DMA1, Stream 2, Channel 5    (DSHOT)
+#define DMACHAN_SPI2_RX    DMAMAP_SPI2_RX     // DMA1, Stream 3, Channel 0    (SPI2 RX)
+#define DMACHAN_SPI2_TX    DMAMAP_SPI2_TX     // DMA1, Stream 4, Channel 0    (SPI2 TX)
+//      AVAILABLE                             // DMA2, Stream 5
+//      AVAILABLE                             // DMA2, Stream 6
+//      AVAILABLE                             // DMA2, Stream 7
+
+//  DMA2 Channel/Stream Selections
+//--------------------------------------------//---------------------------//----------------
+#define DMACHAN_SPI1_RX    DMAMAP_SPI1_RX_1   // DMA2, Stream 0, Channel 3    (SPI1 RX)
+#define DMAMAP_USART6_RX   DMAMAP_USART6_RX_1 // DMA2, Stream 1, Channel 4
+#define DMAMAP_USART1_RX   DMAMAP_USART1_RX_1 // DMA2, Stream 2, Channel 4
+#define DMACHAN_SPI1_TX    DMAMAP_SPI1_TX_1   // DMA2, Stream 3, Channel 3    (SPI1 TX)
+//      AVAILABLE                             // DMA2, Stream 4
+//      AVAILABLE                             // DMA2, Stream 5
+#define DMAMAP_SDIO        DMAMAP_SDIO_2      // DMA2, Stream 6, Channel 4
+//      AVAILABLE                             // DMA2, Stream 7

boards/flywoo/gn-f405/nuttx-config/nsh/defconfig

@@ -0,0 +1,187 @@
+#
+# This file is autogenerated: PLEASE DO NOT EDIT IT.
+#
+# You can use "make menuconfig" to make any modifications to the installed .config file.
+# You can then do "make savedefconfig" to generate a new defconfig file that includes your
+# modifications.
+#
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_MMCSD_HAVE_CARDDETECT is not set
+# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
+# CONFIG_MMCSD_MMCSUPPORT is not set
+# CONFIG_SPI_CALLBACK is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_ARCH="arm"
+CONFIG_ARCH_BOARD_CUSTOM=y
+CONFIG_ARCH_BOARD_CUSTOM_DIR="../../../../boards/flywoo/gn-f405/nuttx-config"
+CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
+CONFIG_ARCH_BOARD_CUSTOM_NAME="px4"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_CHIP_STM32=y
+CONFIG_ARCH_CHIP_STM32F405RG=y
+CONFIG_ARCH_INTERRUPTSTACK=512
+CONFIG_ARMV7M_MEMCPY=y
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_BOARDCTL_RESET=y
+CONFIG_BOARD_CRASHDUMP=y
+CONFIG_BOARD_CUSTOM_LEDS=y
+CONFIG_BOARD_LOOPSPERMSEC=16717
+CONFIG_BOARD_RESET_ON_ASSERT=2
+CONFIG_BUILTIN=y
+CONFIG_C99_BOOL8=y
+CONFIG_CDCACM=y
+CONFIG_CDCACM_IFLOWCONTROL=y
+CONFIG_CDCACM_PRODUCTID=0x0001
+CONFIG_CDCACM_PRODUCTSTR="PX4 GNF405"
+CONFIG_CDCACM_RXBUFSIZE=600
+CONFIG_CDCACM_TXBUFSIZE=2000
+CONFIG_CDCACM_VENDORID=0x26ac
+CONFIG_CDCACM_VENDORSTR="Flywoo"
+CONFIG_DEBUG_SYMBOLS=y
+CONFIG_DEV_FIFO_SIZE=0
+CONFIG_DEV_PIPE_SIZE=70
+CONFIG_DISABLE_MQUEUE=y
+CONFIG_DISABLE_POSIX_TIMERS=y
+CONFIG_FAT_DMAMEMORY=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_LFN_ALIAS_HASH=y
+CONFIG_FDCLONE_STDIO=y
+CONFIG_FS_BINFS=y
+CONFIG_FS_CROMFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FATTIME=y
+CONFIG_FS_PROCFS=y
+CONFIG_FS_PROCFS_REGISTER=y
+CONFIG_FS_ROMFS=y
+CONFIG_GRAN=y
+CONFIG_GRAN_INTR=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+CONFIG_I2C=y
+CONFIG_I2C_RESET=y
+CONFIG_IDLETHREAD_STACKSIZE=750
+CONFIG_LIBC_FLOATINGPOINT=y
+CONFIG_LIBC_STRERROR=y
+CONFIG_MEMSET_64BIT=y
+CONFIG_MEMSET_OPTSPEED=y
+CONFIG_MMCSD=y
+CONFIG_MM_REGIONS=2
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_BUILTIN_APPS=y
+CONFIG_NSH_CROMFSETC=y
+CONFIG_NSH_DISABLE_BASENAME=y
+CONFIG_NSH_DISABLE_DD=y
+CONFIG_NSH_DISABLE_DIRNAME=y
+CONFIG_NSH_DISABLE_HEXDUMP=y
+CONFIG_NSH_DISABLE_IFCONFIG=y
+CONFIG_NSH_DISABLE_IFUPDOWN=y
+CONFIG_NSH_DISABLE_LOSETUP=y
+CONFIG_NSH_DISABLE_MKFIFO=y
+CONFIG_NSH_DISABLE_MKRD=y
+CONFIG_NSH_DISABLE_PUT=y
+CONFIG_NSH_DISABLE_REBOOT=y
+CONFIG_NSH_DISABLE_TELNETD=y
+CONFIG_NSH_DISABLE_UNAME=y
+CONFIG_NSH_DISABLE_WGET=y
+CONFIG_NSH_DISABLE_XD=y
+CONFIG_NSH_FATDEVNO=0
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=128
+CONFIG_NSH_MAXARGUMENTS=15
+CONFIG_NSH_MMCSDSPIPORTNO=2
+CONFIG_NSH_NESTDEPTH=8
+CONFIG_NSH_READLINE=y
+CONFIG_NSH_ROMFSETC=y
+CONFIG_NSH_ROMFSSECTSIZE=128
+CONFIG_NSH_STRERROR=y
+CONFIG_NSH_VARS=y
+CONFIG_PIPES=y
+CONFIG_PREALLOC_TIMERS=50
+CONFIG_PRIORITY_INHERITANCE=y
+CONFIG_PTHREAD_STACK_MIN=512
+CONFIG_RAM_SIZE=196608
+CONFIG_RAM_START=0x20000000
+CONFIG_RAW_BINARY=y
+CONFIG_RTC_DATETIME=y
+CONFIG_SCHED_ATEXIT=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=249
+CONFIG_SCHED_HPWORKSTACKSIZE=1280
+CONFIG_SCHED_INSTRUMENTATION=y
+CONFIG_SCHED_INSTRUMENTATION_EXTERNAL=y
+CONFIG_SCHED_LPWORK=y
+CONFIG_SCHED_LPWORKPRIORITY=50
+CONFIG_SCHED_LPWORKSTACKSIZE=1632
+CONFIG_SCHED_WAITPID=y
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SEM_PREALLOCHOLDERS=32
+CONFIG_SERIAL_TERMIOS=y
+CONFIG_SIG_DEFAULT=y
+CONFIG_SIG_SIGALRM_ACTION=y
+CONFIG_SIG_SIGUSR1_ACTION=y
+CONFIG_SIG_SIGUSR2_ACTION=y
+CONFIG_SIG_SIGWORK=4
+CONFIG_STACK_COLORATION=y
+CONFIG_START_DAY=30
+CONFIG_START_MONTH=11
+CONFIG_STDIO_BUFFER_SIZE=32
+CONFIG_STM32_ADC1=y
+CONFIG_STM32_BBSRAM=y
+CONFIG_STM32_BBSRAM_FILES=5
+CONFIG_STM32_BKPSRAM=y
+CONFIG_STM32_CCMDATARAM=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+CONFIG_STM32_DMA1=y
+CONFIG_STM32_DMA2=y
+CONFIG_STM32_FLASH_PREFETCH=y
+CONFIG_STM32_FLOWCONTROL_BROKEN=y
+CONFIG_STM32_I2C1=y
+CONFIG_STM32_I2CTIMEOMS=10
+CONFIG_STM32_I2CTIMEOTICKS=10
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_OTGFS=y
+CONFIG_STM32_PWR=y
+CONFIG_STM32_RTC=y
+CONFIG_STM32_RTC_HSECLOCK=y
+CONFIG_STM32_RTC_MAGIC_REG=1
+CONFIG_STM32_SAVE_CRASHDUMP=y
+CONFIG_STM32_SDIO=y
+CONFIG_STM32_SDIO_CARD=y
+CONFIG_STM32_SERIALBRK_BSDCOMPAT=y
+CONFIG_STM32_SERIAL_DISABLE_REORDERING=y
+CONFIG_STM32_SPI1=y
+CONFIG_STM32_SPI1_DMA=y
+CONFIG_STM32_SPI1_DMA_BUFFER=1024
+CONFIG_STM32_SPI2=y
+CONFIG_STM32_SPI2_DMA=y
+CONFIG_STM32_SPI3=y
+CONFIG_STM32_SPI_DMA=y
+CONFIG_STM32_SPI_DMATHRESHOLD=8
+CONFIG_STM32_TIM1=y
+CONFIG_STM32_TIM5=y
+CONFIG_STM32_UART4=y
+CONFIG_STM32_USART1=y
+CONFIG_STM32_USART6=y
+CONFIG_STM32_USART_BREAKS=y
+CONFIG_STM32_USART_SINGLEWIRE=y
+CONFIG_STM32_WWDG=y
+CONFIG_SYSTEM_CDCACM=y
+CONFIG_SYSTEM_NSH=y
+CONFIG_TASK_NAME_SIZE=24
+CONFIG_UART4_BAUD=57600
+CONFIG_UART4_RXBUFSIZE=300
+CONFIG_UART4_TXBUFSIZE=300
+CONFIG_USART1_RXBUFSIZE=300
+CONFIG_USART1_RXDMA=y
+CONFIG_USART1_TXBUFSIZE=300
+CONFIG_USART6_BAUD=57600
+CONFIG_USART6_RXBUFSIZE=300
+CONFIG_USART6_RXDMA=y
+CONFIG_USART6_TXBUFSIZE=300
+CONFIG_USBDEV=y
+CONFIG_USBDEV_BUSPOWERED=y
+CONFIG_USBDEV_MAXPOWER=500
+CONFIG_USEC_PER_TICK=1000
+CONFIG_USERMAIN_STACKSIZE=2944
+CONFIG_USER_ENTRYPOINT="nsh_main"