boards: sync

Updated README - general refresh
Handle invalid yaw rate setpoints
2026-05-27 10:20:05 +08:00 · 2021-03-14 14:24:41 -04:00 · 2021-03-14 14:56:24 +01:00 · 2021-03-14 00:01:57 +01:00 · 2021-03-14 00:01:57 +01:00 · 2021-03-12 20:45:45 +01:00
784 changed files with 105872 additions and 22361 deletions
@@ -17,7 +17,7 @@ pipeline {
          ]

          def armhf_builds = [
-            target: ["aerotenna_ocpoc_default", "beaglebone_blue_default", "emlid_navio2_default", "px4_raspberrypi_default", "scumaker_pilotpi_default"],
+            target: ["beaglebone_blue_default", "emlid_navio2_default", "px4_raspberrypi_default", "scumaker_pilotpi_default"],
            image: docker_images.armhf,
            archive: false
          ]
@@ -55,13 +55,17 @@ pipeline {
                     "holybro_durandal-v1_default",
                     "holybro_kakutef7_default",
                     "holybro_pix32v5_default",
-                     "intel_aerofc-v1_default",
                     "modalai_fc-v1_default",
                     "mro_ctrl-zero-f7_default",
+                     "mro_ctrl-zero-f7-oem_default",
+                     "mro_ctrl-zero-h7_default",
+                     "mro_ctrl-zero-h7-oem_default",
                     "mro_pixracerpro_default",
                     "mro_x21-777_default",
                     "mro_x21_default",
                     "nxp_fmuk66-e_default",
+                     "nxp_fmuk66-e_rtps",
+                     "nxp_fmuk66-e_socketcan",
                     "nxp_fmuk66-v3_default",
                     "nxp_fmuk66-v3_rtps",
                     "nxp_fmuk66-v3_socketcan",
@@ -70,16 +74,12 @@ pipeline {
                     "omnibus_f4sd_default",
                     "px4_fmu-v2_default",
                     "px4_fmu-v2_fixedwing",
-                     "px4_fmu-v2_lpe",
                     "px4_fmu-v2_multicopter",
                     "px4_fmu-v2_rover",
                     "px4_fmu-v2_test",
-                     "px4_fmu-v3_ctrlalloc",
                     "px4_fmu-v3_default",
                     "px4_fmu-v4_cannode",
-                     "px4_fmu-v4_ctrlalloc",
                     "px4_fmu-v4_default",
-                     "px4_fmu-v4_optimized",
                     "px4_fmu-v4pro_default",
                     "px4_fmu-v5_ctrlalloc",
                     "px4_fmu-v5_debug",
@@ -258,6 +258,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
@@ -333,6 +334,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
                  }
@@ -407,6 +409,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 13000"' // generic vtol standard
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
@@ -482,6 +485,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
@@ -560,6 +564,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'   // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "px4io forceupdate 14662 /etc/extras/px4_io-v2_default.bin" || true' // force px4io update
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
@@ -635,6 +640,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"' // generic quadcopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
                  }
@@ -713,6 +719,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set IMU_GYRO_RATEMAX 250"' // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set MAV_0_CONFIG 0"'       // limit cpu usage
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'   // generic multicopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                 // reboot to apply
                  }
@@ -787,6 +794,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic vtol standardulticopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
                  }
@@ -941,6 +949,7 @@ pipeline {
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set CBRK_BUZZER 782097"'  // disable buzzer
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOCONFIG 2"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_AUTOSTART 4001"'  // generic multicopter
+                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param set SYS_BL_UPDATE 1"'     // update bootloader
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "param save"'
                    sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "reboot" || true'                // reboot to apply
                  }
@@ -1004,6 +1013,7 @@ void statusFTDI() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener battery_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener cpuload"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_attitude"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_event_flags"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_local_position"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_selector_status"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener estimator_sensor_bias"'
@@ -1019,6 +1029,7 @@ void statusFTDI() {
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_gyro_fifo"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_mag"'
+  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensor_selection"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener sensors_status_imu"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener system_power"'
  sh './Tools/HIL/run_nsh_cmd.py --device `find /dev/serial -name *usb-*` --cmd "listener telemetry_status"'
@@ -52,8 +52,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z
    - name: check environment
@@ -34,8 +34,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -15,7 +15,6 @@ jobs:
    strategy:
      matrix:
        config: [
-          aerotenna_ocpoc_default,
          beaglebone_blue_default,
          emlid_navio2_default,
          px4_raspberrypi_default,
@@ -43,8 +42,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -39,8 +39,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -43,8 +43,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -34,13 +34,17 @@ jobs:
          holybro_durandal-v1_default,
          holybro_kakutef7_default,
          holybro_pix32v5_default,
-          intel_aerofc-v1_default,
          modalai_fc-v1_default,
          mro_ctrl-zero-f7_default,
+          mro_ctrl-zero-f7-oem_default,
+          mro_ctrl-zero-h7_default,
+          mro_ctrl-zero-h7-oem_default,
          mro_pixracerpro_default,
          mro_x21-777_default,
          mro_x21_default,
          nxp_fmuk66-e_default,
+          nxp_fmuk66-e_rtps,
+          nxp_fmuk66-e_socketcan,
          nxp_fmuk66-v3_default,
          nxp_fmuk66-v3_rtps,
          nxp_fmuk66-v3_socketcan,
@@ -49,16 +53,12 @@ jobs:
          omnibus_f4sd_default,
          px4_fmu-v2_default,
          px4_fmu-v2_fixedwing,
-          px4_fmu-v2_lpe,
          px4_fmu-v2_multicopter,
          px4_fmu-v2_rover,
          px4_fmu-v2_test,
-          px4_fmu-v3_ctrlalloc,
          px4_fmu-v3_default,
          px4_fmu-v4_cannode,
-          px4_fmu-v4_ctrlalloc,
          px4_fmu-v4_default,
-          px4_fmu-v4_optimized,
          px4_fmu-v4pro_default,
          px4_fmu-v5_ctrlalloc,
          px4_fmu-v5_default,
@@ -67,7 +67,6 @@ jobs:
          px4_fmu-v5_optimized,
          px4_fmu-v5_rover,
          px4_fmu-v5_rtps,
-          px4_fmu-v5_stackcheck,
          px4_fmu-v5_uavcanv0periph,
          px4_fmu-v5_uavcanv1,
          px4_fmu-v5x_base_phy_DP83848C,
@@ -100,8 +99,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -43,8 +43,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -43,8 +43,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -49,8 +49,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -44,8 +44,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -49,8 +49,8 @@ jobs:
          mkdir -p ~/.ccache
          echo "base_dir = ${GITHUB_WORKSPACE}" > ~/.ccache/ccache.conf
          echo "compression = true" >> ~/.ccache/ccache.conf
-          echo "compression_level = 6" >> ~/.ccache/ccache.conf
-          echo "max_size = 400M" >> ~/.ccache/ccache.conf
+          echo "compression_level = 5" >> ~/.ccache/ccache.conf
+          echo "max_size = 100M" >> ~/.ccache/ccache.conf
          ccache -s
          ccache -z

@@ -51,9 +51,6 @@
 [submodule "Tools/jsbsim_bridge"]
 	path = Tools/jsbsim_bridge
 	url = https://github.com/PX4/px4-jsbsim-bridge.git
-[submodule "src/examples/gyro_fft/CMSIS_5"]
-	path = src/examples/gyro_fft/CMSIS_5
-	url = https://github.com/ARM-software/CMSIS_5.git
 [submodule "src/drivers/uavcan_v1/libcanard"]
 	path = src/drivers/uavcan_v1/libcanard
 	url = https://github.com/UAVCAN/libcanard.git
@@ -116,11 +116,6 @@ CONFIG:
      buildType: MinSizeRel
      settings:
        CONFIG: holybro_durandal-v1_default
-    intel_aerofc-v1_default:
-      short: intel_aerofc-v1
-      buildType: MinSizeRel
-      settings:
-        CONFIG: intel_aerofc-v1_default
    modalai_fc-v1_default:
      short: modalai_fc-v1
      buildType: MinSizeRel
@@ -27,7 +27,6 @@
        "cSpell.showStatus": false,
        "cSpell.words": [
                "acro",
-                "rattitude",
                "nuttx",
                "esc"
        ],
@@ -174,6 +174,8 @@ define cmake-build
 	@$(call cmake-cache-check)
 	@# make sure to start from scratch when switching from GNU Make to Ninja
 	@if [ $(PX4_CMAKE_GENERATOR) = "Ninja" ] && [ -e $(BUILD_DIR)/Makefile ]; then rm -rf $(BUILD_DIR); fi
+	@# make sure to start from scratch if ninja build file is missing
+	@if [ $(PX4_CMAKE_GENERATOR) = "Ninja" ] && [ ! -f $(BUILD_DIR)/build.ninja ]; then rm -rf $(BUILD_DIR); fi
 	@# only excplicitly configure the first build, if cache file already exists the makefile will rerun cmake automatically if necessary
 	@if [ ! -e $(BUILD_DIR)/CMakeCache.txt ] || [ $(CMAKE_CACHE_CHECK) ]; then \
 		mkdir -p $(BUILD_DIR) \
@@ -268,7 +270,6 @@ px4fmu_firmware: \
 misc_qgc_extra_firmware: \
 	check_nxp_fmuk66-v3_default \
 	check_nxp_fmurt1062-v1_default \
-	check_intel_aerofc-v1_default \
 	check_mro_x21_default \
 	check_bitcraze_crazyflie_default \
 	check_bitcraze_crazyflie21_default \
@@ -8,26 +8,30 @@

 This repository holds the [PX4](http://px4.io) flight control solution for drones, with the main applications located in the [src/modules](https://github.com/PX4/PX4-Autopilot/tree/master/src/modules) directory. It also contains the PX4 Drone Middleware Platform, which provides drivers and middleware to run drones.

+PX4 is highly portable, OS-independent and supports Linux, NuttX and QuRT out of the box.
+
 * Official Website: http://px4.io (License: BSD 3-clause, [LICENSE](https://github.com/PX4/PX4-Autopilot/blob/master/LICENSE))
 * [Supported airframes](https://docs.px4.io/master/en/airframes/airframe_reference.html) ([portfolio](http://px4.io/#airframes)):
-  * [Multicopters](https://docs.px4.io/master/en/airframes/airframe_reference.html#copter)
-  * [Fixed wing](https://docs.px4.io/master/en/airframes/airframe_reference.html#plane)
-  * [VTOL](https://docs.px4.io/master/en/airframes/airframe_reference.html#vtol)
-  * many more experimental types (Rovers, Blimps, Boats, Submarines, Autogyros, etc)
+  * [Multicopters](https://docs.px4.io/master/en/frames_multicopter/)
+  * [Fixed wing](https://docs.px4.io/master/en/frames_plane/)
+  * [VTOL](https://docs.px4.io/master/en/frames_vtol/)
+  * [Autogyro](https://docs.px4.io/master/en/frames_autogyro/)
+  * [Rover](https://docs.px4.io/master/en/frames_rover/)
+  * many more experimental types (Blimps, Boats, Submarines, Autogyros, etc)
 * Releases: [Downloads](https://github.com/PX4/PX4-Autopilot/releases)


-## PX4 Users
+## Building a PX4 based drone, rover, boat or robot

 The [PX4 User Guide](https://docs.px4.io/master/en/) explains how to assemble [supported vehicles](https://docs.px4.io/master/en/airframes/airframe_reference.html) and fly drones with PX4.
 See the [forum and chat](https://docs.px4.io/master/en/#support) if you need help!


-## PX4 Developers
+## Changing code and contributing

-This [Developer Guide](https://dev.px4.io/) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.
+This [Developer Guide](https://docs.px4.io/master/en/development/development.html) is for software developers who want to modify the flight stack and middleware (e.g. to add new flight modes), hardware integrators who want to support new flight controller boards and peripherals, and anyone who wants to get PX4 working on a new (unsupported) airframe/vehicle.

-Developers should read the [Guide for Contributions](https://dev.px4.io/master/en/contribute/).
+Developers should read the [Guide for Contributions](https://docs.px4.io/master/en/contribute/).
 See the [forum and chat](https://dev.px4.io/master/en/#support) if you need help!


@@ -69,10 +73,8 @@ The PX4 Dev Team syncs up on a [weekly dev call](https://dev.px4.io/master/en/co
    * [Daniel Agar](https://github.com/dagar)
  * [State Estimation](https://github.com/PX4/PX4-Autopilot/issues?q=is%3Aopen+is%3Aissue+label%3A%22state+estimation%22)
    * [Paul Riseborough](https://github.com/priseborough)
-  * Vision based navigation
-    * [Julian Kent](https://github.com/jkflying)
-  * Obstacle Avoidance
-    * [Martina Rivizzigno](https://github.com/mrivi)
+  * Vision based navigation and Obstacle Avoidance
+    * [Markus Achtelik](https://github.com/markusachtelik)
  * RTPS/ROS2 Interface
    * [Nuno Marques](https://github.com/TSC21)

@@ -80,7 +82,9 @@ See also [maintainers list](https://px4.io/community/maintainers/) (px4.io) and

 ## Supported Hardware

-This repository contains code supporting these boards:
+This repository contains code supporting Pixhawk standard boards (best supported, best tested, recommended choice) and proprietary boards.
+
+### Pixhawk Standard Boards
  * FMUv2
    * [Pixhawk](https://docs.px4.io/master/en/flight_controller/pixhawk.html)
    * [Pixfalcon](https://docs.px4.io/master/en/flight_controller/pixfalcon.html)
@@ -88,19 +92,25 @@ This repository contains code supporting these boards:
    * [Pixhawk 2](https://docs.px4.io/master/en/flight_controller/pixhawk-2.html)
    * [Pixhawk Mini](https://docs.px4.io/master/en/flight_controller/pixhawk_mini.html)
    * [CUAV Pixhack v3](https://docs.px4.io/master/en/flight_controller/pixhack_v3.html)
-  * FMUv4
+  * FMUv4 (STM32F4)
    * [Pixracer](https://docs.px4.io/master/en/flight_controller/pixracer.html)
    * [Pixhawk 3 Pro](https://docs.px4.io/master/en/flight_controller/pixhawk3_pro.html)
-  * FMUv5 (ARM Cortex M7)
+  * FMUv5 (STM32F7)
    * [Pixhawk 4](https://docs.px4.io/master/en/flight_controller/pixhawk4.html)
    * [Pixhawk 4 mini](https://docs.px4.io/master/en/flight_controller/pixhawk4_mini.html)
    * [CUAV V5+](https://docs.px4.io/master/en/flight_controller/cuav_v5_plus.html)
    * [CUAV V5 nano](https://docs.px4.io/master/en/flight_controller/cuav_v5_nano.html)
+  * FMUv6X and FMUv6U (STM32H7)
+    * Various vendors will provide FMUv6X and FMUv6U based designs Q2/2021
+
+### Manufacturer and Community supported
+  * [Holybro Durandal](https://docs.px4.io/master/en/flight_controller/durandal.html)
+  * [Hex Cube Orange](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_orange.html)
+  * [Hex Cube Yellow](https://docs.px4.io/master/en/flight_controller/cubepilot_cube_yellow.html)
  * [Airmind MindPX V2.8](http://www.mindpx.net/assets/accessories/UserGuide_MindPX.pdf)
  * [Airmind MindRacer V1.2](http://mindpx.net/assets/accessories/mindracer_user_guide_v1.2.pdf)
  * [Bitcraze Crazyflie 2.0](https://docs.px4.io/master/en/flight_controller/crazyflie2.html)
  * [Omnibus F4 SD](https://docs.px4.io/master/en/flight_controller/omnibus_f4_sd.html)
-  * [Holybro Durandal](https://docs.px4.io/master/en/flight_controller/durandal.html)
  * [Holybro Kakute F7](https://docs.px4.io/master/en/flight_controller/kakutef7.html)
  * [Raspberry PI with Navio 2](https://docs.px4.io/master/en/flight_controller/raspberry_pi_navio2.html)

@@ -31,11 +31,12 @@
 #
 ############################################################################

-message(STATUS "ROMFS: ${config_romfs_root}")
-
 set(romfs_src_dir ${PX4_SOURCE_DIR}/ROMFS/${config_romfs_root})
 set(romfs_gen_root_dir ${PX4_BINARY_DIR}/etc)

+file(RELATIVE_PATH romfs_path_relative ${PX4_SOURCE_DIR} ${romfs_src_dir})
+message(STATUS "ROMFS: ${romfs_path_relative}")
+
 set_property(GLOBAL PROPERTY PX4_ROMFS_FILES)
 set_property(GLOBAL PROPERTY PX4_ROMFS_CMAKE_FILES)

@@ -81,6 +82,9 @@ file(GLOB jinja_templates ${PX4_SOURCE_DIR}/Tools/serial/*.jinja)
 if (px4_constrained_flash_build)
 	set(added_arguments --constrained-flash)
 endif()
+if(PX4_ETHERNET)
+	set(added_arguments ${added_arguments} --ethernet)
+endif()
 # create list of relative romfs file names
 set(romfs_copy_files_relative)
 foreach(romfs_file IN LISTS romfs_copy_files)
@@ -146,15 +150,53 @@ if(config_io_board)
 		copy_px4io_bin
 		${fw_io_bin}
 	)
+	file(RELATIVE_PATH iofw_file_relative ${PX4_SOURCE_DIR} ${fw_io_bin})
+	message(STATUS "ROMFS:  Adding ${iofw_file_relative} -> /etc/extras/${config_io_board}.bin")
 endif()

-if(config_build_bootloader)
+
+# board bootloader (built or included)
+if(TARGET copy_bootloader_bin)
+
+	if(board_bootloader_firmware)
+		file(RELATIVE_PATH bl_file_relative ${PX4_SOURCE_DIR} ${board_bootloader_firmware})
+		message(STATUS "ROMFS:  Adding ${bl_file_relative} -> /etc/extras/bootloader.bin")
+	else()
+		file(RELATIVE_PATH bl_file_relative ${PX4_SOURCE_DIR} ${bootloader_bin})
+		message(STATUS "ROMFS:  Adding ${bl_file_relative} -> /etc/extras/bootloader.bin")
+	endif()
+
 	list(APPEND extras_dependencies
 		copy_bootloader_bin
 		${bootloader_bin}
 	)
 endif()

+
+# optional board architecture defaults
+set(board_arch_rc_file "rc.board_arch_defaults")
+if(EXISTS "${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file}")
+	file(RELATIVE_PATH rc_file_relative ${PX4_SOURCE_DIR} ${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file})
+	message(STATUS "ROMFS:  Adding ${rc_file_relative} -> /etc/init.d/${board_arch_rc_file}")
+
+	add_custom_command(
+		OUTPUT
+			${romfs_gen_root_dir}/init.d/${board_arch_rc_file}
+			${board_arch_rc_file}.stamp
+		COMMAND ${CMAKE_COMMAND} -E copy_if_different ${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file} ${romfs_gen_root_dir}/init.d/${board_arch_rc_file}
+		COMMAND ${CMAKE_COMMAND} -E touch ${board_arch_rc_file}.stamp
+		DEPENDS
+			${PX4_SOURCE_DIR}/platforms/${PX4_PLATFORM}/init/${CONFIG_ARCH_CHIP}/${board_arch_rc_file}
+			romfs_copy.stamp
+		COMMENT "ROMFS: copying ${board_arch_rc_file}"
+	)
+
+	list(APPEND extras_dependencies
+		${board_arch_rc_file}.stamp
+	)
+endif()
+
+
 set(OPTIONAL_BOARD_RC)
 list(APPEND OPTIONAL_BOARD_RC
 	rc.board_defaults
@@ -166,7 +208,8 @@ list(APPEND OPTIONAL_BOARD_RC
 foreach(board_rc_file ${OPTIONAL_BOARD_RC})

 	if(EXISTS "${PX4_BOARD_DIR}/init/${board_rc_file}")
-		message(STATUS "ROMFS: Adding ${board_rc_file}")
+		file(RELATIVE_PATH rc_file_relative ${PX4_SOURCE_DIR} ${PX4_BOARD_DIR}/init/${board_rc_file})
+		message(STATUS "ROMFS:  Adding ${rc_file_relative} -> /etc/init.d/${board_rc_file}")

 		add_custom_command(
 			OUTPUT
@@ -194,7 +237,7 @@ if(config_uavcan_peripheral_firmware)

 	foreach(uavcan_peripheral_config ${config_uavcan_peripheral_firmware})
 		# include the px4io binary in ROMFS
-		message(STATUS "ROMFS: Building and including UAVCAN peripheral ${uavcan_peripheral_config}")
+		message(STATUS "ROMFS:  Adding UAVCAN peripheral ${uavcan_peripheral_config} -> /etc/uavcan/fw/")
 		ExternalProject_Add(build_${uavcan_peripheral_config}
 			SOURCE_DIR ${CMAKE_SOURCE_DIR}
 			DOWNLOAD_COMMAND ""
@@ -30,14 +30,16 @@ sercon
 #
 ver all

-#
-# Set the parameter file if mtd starts successfully.
-#
-if mtd start
+if mft query -q -k MTD -s MTD_PARAMETERS -v /fs/mtd_params
 then
 	set PARAM_FILE /fs/mtd_params
 fi

+if mft query -q -k MTD -s MTD_PARAMETERS -v /dev/eeeprom0
+then
+	set PARAM_FILE /dev/eeeprom0
+fi
+
 #
 # Load parameters.
 #
@@ -47,6 +49,17 @@ then
 	param reset_all
 fi

+#
+# Optional board architecture defaults: rc.board_arch_defaults
+#
+set BOARD_ARCH_RC_DEFAULTS ${R}etc/init.d/rc.board_arch_defaults
+if [ -f $BOARD_ARCH_RC_DEFAULTS ]
+then
+	echo "Board architecture defaults: ${BOARD_ARCH_RC_DEFAULTS}"
+	. $BOARD_ARCH_RC_DEFAULTS
+fi
+unset BOARD_ARCH_RC_DEFAULTS
+
 #
 # Optional board defaults: rc.board_defaults
 #
@@ -1,5 +0,0 @@
-px4fmuv3_bl.bin: Bootloader binary of the PX4 Bootloader
-  (https://github.com/PX4/Bootloader)
-  based on commit 184b813699a9cfd6f43a5a21556a06b4372baf5f
-  for the target px4fmuv3_bl
-
@@ -0,0 +1,14 @@
+#!/bin/sh
+#
+# @name 3DR Iris Quadrotor SITL (foggy_lidar)
+#
+# @type Quadrotor Wide
+#
+
+. ${R}etc/init.d-posix/airframes/10016_iris
+
+if [ $AUTOCNF = yes ]
+then
+	param set EKF2_RNG_AID 1
+	param set EKF2_RNG_A_HMAX 10
+fi
@@ -1,2 +1,2 @@
 # shellcheck disable=SC2154
-mavlink start -x -u 14558 -r 4000000 -m onboard -o 14541 # add mavlink stream for SDK
+mavlink start -x -u 14558 -r 4000000 -m onboard -o 14541 -p # add mavlink stream for SDK
@@ -0,0 +1,61 @@
+#!/bin/sh
+#
+# @name Standard VTOL
+#
+# @type Standard VTOL
+#
+
+. ${R}etc/init.d/rc.vtol_defaults
+
+if [ $AUTOCNF = yes ]
+then
+	param set FW_L1_PERIOD 12
+	param set FW_MAN_P_MAX 30
+	param set FW_PR_FF 0.2
+	param set FW_PR_I 0.4
+	param set FW_PR_P 0.9
+	param set FW_PSP_OFF 2
+	param set FW_P_LIM_MAX 32
+	param set FW_P_LIM_MIN -15
+	param set FW_RR_FF 0.1
+	param set FW_RR_P 0.3
+	param set FW_THR_CRUISE 0.25
+	param set FW_THR_MAX 0.6
+	param set FW_THR_MIN 0.05
+	param set FW_T_ALT_TC 2
+	param set FW_T_CLMB_MAX 8
+	param set FW_T_HRATE_FF 0.5
+	param set FW_T_SINK_MAX 2.7
+	param set FW_T_SINK_MIN 2.2
+	param set FW_T_TAS_TC 2
+
+	param set MC_ROLLRATE_P 0.3
+	param set MC_YAW_P 1.6
+
+	param set MIS_TAKEOFF_ALT 10
+
+	param set MPC_ACC_HOR_MAX 2
+	param set MPC_XY_P 0.8
+	param set MPC_XY_VEL_P_ACC 3
+	param set MPC_XY_VEL_I_ACC 4
+	param set MPC_XY_VEL_D_ACC 0.1
+
+	param set NAV_ACC_RAD 5
+	param set NAV_LOITER_RAD 80
+
+	param set VT_FWD_THRUST_EN 4
+	param set VT_F_TRANS_THR 0.75
+	param set VT_MOT_ID 1234
+	param set VT_FW_MOT_OFFID 1234
+	param set VT_B_TRANS_DUR 8
+	param set VT_TYPE 2
+
+	param set RC_MAP_AUX1 8
+	param set RC_MAP_AUX2 9
+	param set RC_MAP_AUX3 10
+fi
+
+set MAV_TYPE 22
+
+set MIXER_FILE etc/mixers-sitl/standard_vtol_sitl.main.mix
+set MIXER custom
@@ -0,0 +1 @@
+mixer append /dev/pwm_output0 etc/mixers-sitl/package_drop.aux.mix
@@ -38,7 +38,6 @@ then
 	param set NAV_LOITER_RAD 100

 	param set RWTO_TKOFF 1
-	param set MAV_BROADCAST 1

 	param set FW_ARSP_SCALE_EN 0

@@ -9,11 +9,11 @@

 if [ $AUTOCNF = yes ]
 then
-	param set MC_PITCHRATE_P 0.1000
+	param set MC_PITCHRATE_P 0.0800
 	param set MC_PITCHRATE_I 0.0400
 	param set MC_PITCHRATE_D 0.0010
 	param set MC_PITCH_P 9.0
-	param set MC_ROLLRATE_P 0.1000
+	param set MC_ROLLRATE_P 0.0800
 	param set MC_ROLLRATE_I 0.0400
 	param set MC_ROLLRATE_D 0.0010
 	param set MC_ROLL_P 9.0
@@ -1,7 +1,7 @@

 mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix

-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
 mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
@@ -1,7 +1,7 @@

 mixer append /dev/pwm_output0 etc/mixers/mount_legs.aux.mix

-mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530
+mavlink start -x -u 14558 -r 4000 -f -m onboard -o 14530 -p

 # shellcheck disable=SC2154
 mavlink stream -r 10 -s MOUNT_ORIENTATION -u $udp_gcs_port_local
@@ -34,6 +34,7 @@
 px4_add_romfs_files(
 	10016_iris
 	10017_iris_ctrlalloc
+	10018_iris_foggy_lidar
 	10020_if750a
 	10030_px4vision
 	1010_iris_opt_flow
@@ -64,6 +65,8 @@ px4_add_romfs_files(
 	1040_standard_vtol
 	1041_tailsitter
 	1042_tiltrotor
+	1043_standard_vtol_drop
+	1043_standard_vtol_drop.post
 	1060_rover
 	1061_r1_rover
 	1062_tf-r1
@@ -117,49 +117,49 @@ if [ $AUTOCNF = yes ]
 then
 	param set SYS_AUTOSTART $REQUESTED_AUTOSTART

-	param set BAT_N_CELLS 4
-
-	param set CAL_ACC0_ID 1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
-	param set CAL_ACC1_ID 1310996 # 1310996: DRV_IMU_DEVTYPE_SIM, BUS: 2, ADDR: 1, TYPE: SIMULATION
-	param set CAL_ACC2_ID 1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION
+	param set CAL_ACC0_ID  1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
 	param set CAL_GYRO0_ID 1310988 # 1310988: DRV_IMU_DEVTYPE_SIM, BUS: 1, ADDR: 1, TYPE: SIMULATION
+	param set CAL_ACC1_ID  1310996 # 1310996: DRV_IMU_DEVTYPE_SIM, BUS: 2, ADDR: 1, TYPE: SIMULATION
 	param set CAL_GYRO1_ID 1310996 # 1310996: DRV_IMU_DEVTYPE_SIM, BUS: 2, ADDR: 1, TYPE: SIMULATION
+	param set CAL_ACC2_ID  1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION
 	param set CAL_GYRO2_ID 1311004 # 1311004: DRV_IMU_DEVTYPE_SIM, BUS: 3, ADDR: 1, TYPE: SIMULATION
+
 	param set CAL_MAG0_ID 197388
 	param set CAL_MAG1_ID 197644

-	param set CBRK_AIRSPD_CHK 0
-	param set CBRK_SUPPLY_CHK 894281
-
-	# Don't require RC calibration and configuration
-	param set COM_RC_IN_MODE 1
-
-	# Speedup SITL startup
-	param set EKF2_REQ_GPS_H 0.5
-
-	# Multi-EKF
-	param set EKF2_MULTI_IMU 3
-	param set SENS_IMU_MODE 0
-	param set EKF2_MULTI_MAG 2
-	param set SENS_MAG_MODE 0
-
-	# By default log from boot until first disarm.
-	param set SDLOG_MODE 1
-	# enable default, estimator replay and vision/avoidance logging profiles
-	param set SDLOG_PROFILE 131
-	param set SDLOG_DIRS_MAX 7
-	param set SENS_BOARD_ROT 0
 	param set SENS_BOARD_X_OFF 0.000001
 	param set SENS_DPRES_OFF 0.001
-	param set SYS_RESTART_TYPE 2

-	param set TRIG_INTERFACE 3
+	param set SYS_RESTART_TYPE 2
 fi

-param set COM_CPU_MAX -1 # disable check, no CPU load reported on posix yet
+param set-default BAT_N_CELLS 4

-# Simulator IMU data provided at 250 Hz
-param set IMU_INTEG_RATE 250
+param set-default CBRK_AIRSPD_CHK 0
+param set-default CBRK_SUPPLY_CHK 894281
+
+# disable check, no CPU load reported on posix yet
+param set-default COM_CPU_MAX -1
+
+# Don't require RC calibration and configuration
+param set-default COM_RC_IN_MODE 1
+
+# Speedup SITL startup
+param set-default EKF2_REQ_GPS_H 0.5
+
+# Multi-EKF
+param set-default EKF2_MULTI_IMU 3
+param set-default SENS_IMU_MODE 0
+param set-default EKF2_MULTI_MAG 2
+param set-default SENS_MAG_MODE 0
+
+# By default log from boot until first disarm.
+param set-default SDLOG_MODE 1
+# enable default, estimator replay and vision/avoidance logging profiles
+param set-default SDLOG_PROFILE 131
+param set-default SDLOG_DIRS_MAX 7
+
+param set-default TRIG_INTERFACE 3

 # Adapt timeout parameters if simulation runs faster or slower than realtime.
 if [ -n "$PX4_SIM_SPEED_FACTOR" ]; then
@@ -206,6 +206,9 @@ then
 	param set SYS_AUTOCONFIG 0
 fi

+# Simulator IMU data provided at 250 Hz
+param set IMU_INTEG_RATE 250
+
 dataman start
 # only start the simulator if not in replay mode, as both control the lockstep time
 if ! replay tryapplyparams
@@ -244,7 +247,7 @@ then
 	sh etc/init.d-posix/rc.mavlink_override
 else
 	# GCS link
-	mavlink start -x -u $udp_gcs_port_local -r 4000000 -f
+	mavlink start -x -u $udp_gcs_port_local -r 4000000 -f -p
 	mavlink stream -r 50 -s POSITION_TARGET_LOCAL_NED -u $udp_gcs_port_local
 	mavlink stream -r 50 -s LOCAL_POSITION_NED -u $udp_gcs_port_local
 	mavlink stream -r 50 -s GLOBAL_POSITION_INT -u $udp_gcs_port_local
@@ -256,13 +259,13 @@ else
 	mavlink stream -r 10 -s OPTICAL_FLOW_RAD -u $udp_gcs_port_local

 	# API/Offboard link
-	mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote
+	mavlink start -x -u $udp_offboard_port_local -r 4000000 -f -m onboard -o $udp_offboard_port_remote -p

 	# Onboard link to camera
-	mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote
+	mavlink start -x -u $udp_onboard_payload_port_local -r 4000 -f -m onboard -o $udp_onboard_payload_port_remote -p

 	# Onboard link to gimbal
-	mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote
+	mavlink start -x -u $udp_onboard_gimbal_port_local -r 400000 -m gimbal -o $udp_onboard_gimbal_port_remote -p
 fi

 # execute autostart post script if any
@@ -42,6 +42,7 @@ px4_add_romfs_files(
 	rc.fw_apps
 	rc.fw_defaults
 	rc.interface
+	rc.io
 	rc.logging
 	rc.mc_apps
 	rc.mc_defaults
@@ -47,4 +47,13 @@ param set-default RWTO_TKOFF 1

 param set SYS_HITL 1

+# disable some checks to allow to fly
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
 set MIXER AERT
@@ -20,7 +20,6 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -20,7 +20,6 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -20,7 +20,6 @@
 # @maintainer Simon Wilks <simon@uaventure.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -14,3 +14,12 @@ set MIXER quad_x
 set PWM_OUT 1234

 param set SYS_HITL 1
+
+# disable some checks to allow to fly
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
@@ -8,7 +8,6 @@
 # @maintainer Roman Bapst <roman@auterion.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -67,6 +66,15 @@ param set-default VT_TYPE 2

 param set SYS_HITL 1

+# disable some checks to allow to fly
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
+
 set MAV_TYPE 22

 set MIXER standard_vtol_hitl
@@ -18,7 +18,6 @@
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,3 +17,12 @@ set PWM_OUT 1234

 # set SYS_HITL to 2 to start the SIH and avoid sensors startup
 param set SYS_HITL 2
+
+# disable some checks to allow to fly:
+# - with usb
+param set-default CBRK_USB_CHK 197848
+# - without real battery
+param set-default CBRK_SUPPLY_CHK 894281
+# - without safety switch
+param set-default COM_PREARM_MODE 0
+param set-default CBRK_IO_SAFETY 22027
@@ -16,7 +16,6 @@
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @maintainer Simon Wilks <simon@uaventure.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @output AUX5 Throttle
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -13,7 +13,6 @@
 # @maintainer Roman Bapst <roman@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @output AUX4 Gear
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer Roman Bapst <roman@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @maintainer Roman Bapst <roman@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @output AUX5 Throttle
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -16,7 +16,6 @@
 # @output AUX3 Motor
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer Sander Smeets <sander@droneslab.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer Sander Smeets <sander@droneslab.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer Andreas Antener <andreas@uaventure.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer Samay Siga <samay_s@icloud.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @output MAIN8 Elevon left
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @output MAIN8 Pusher reverse channel
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @output MAIN8 motor 4
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @output MAIN9 Pusher motor
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -20,7 +20,6 @@
 # @output AUX5 Throttle
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -13,7 +13,6 @@
 # @maintainer Roman Bapst <roman@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -12,7 +12,6 @@
 #
 # @maintainer Trent Lukaczyk <aerialhedgehog@gmail.com>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -12,7 +12,6 @@
 #
 # @maintainer Trent Lukaczyk <aerialhedgehog@gmail.com>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -13,7 +13,6 @@
 # @maintainer Emmanuel Roussel
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -14,7 +14,6 @@
 # @output MAIN5 tail-rotor servo
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -20,7 +20,6 @@
 # @maintainer ThunderFly s.r.o., Roman Dvorak <dvorakroman@thunderfly.cz>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -15,7 +15,6 @@
 # @maintainer ThunderFly s.r.o., Roman Dvorak <dvorakroman@thunderfly.cz>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -10,7 +10,6 @@
 # @maintainer ThunderFly s.r.o.
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -20,7 +20,6 @@
 # @maintainer Andreas Antener <andreas@uaventure.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -20,7 +20,6 @@
 #
 # @maintainer Andreas Antener <andreas@uaventure.com>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -21,7 +21,6 @@
 # @maintainer Friedrich Beckmann <friedrich.beckmann@hs-augsburg.de>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -22,7 +22,6 @@
 # @maintainer Ian McNanie <ianmcnanie@gmail.com>
 # @maintainer William Peale <develop707@gmail.com>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -10,7 +10,6 @@
 # @output MAIN4 tail thruster
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -15,7 +15,6 @@
 #
 # @maintainer
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -16,7 +16,6 @@
 # @maintainer Simon Wilks <simon@uaventure.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @maintainer Simon Wilks <simon@uaventure.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -16,7 +16,6 @@
 # @maintainer Julian Oes <julian@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -21,11 +21,8 @@
 set MIXER quad_x
 set PWM_OUT 1234

-
-
 param set-default IMU_GYRO_CUTOFF 40
 param set-default IMU_DGYRO_CUTOFF 20
-param set-default IMU_GYRO_RATEMAX 400

 param set-default MC_ROLLRATE_P 0.18
 param set-default MC_ROLLRATE_I 0.15
@@ -13,7 +13,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -13,7 +13,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -49,6 +48,7 @@ param set-default CBRK_IO_SAFETY    22027
 param set-default CBRK_SUPPLY_CHK   894281

 # RC configuration
+param set-default RC_MAP_MODE_SW    5
 param set-default RC_MAP_PITCH      2
 param set-default RC_MAP_ROLL       1
 param set-default RC_MAP_THROTTLE   3
@@ -8,7 +8,6 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -15,7 +15,6 @@
 # @maintainer Blankered
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -18,7 +18,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -7,7 +7,6 @@
 #
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @maintainer Lorenz Meier <lorenz@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -10,7 +10,6 @@
 # @maintainer Beat Kueng <beat-kueng@gmx.net>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer Beat Kueng <beat@px4.io>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer James Goppert <james.goppert@gmail.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -1,81 +0,0 @@
-#!/bin/sh
-#
-# @name Intel Aero Ready to Fly Drone
-#
-# @type Quadrotor x
-# @class Copter
-#
-# @maintainer Beat Kueng <beat@px4.io>
-#
-# @board px4_fmu-v2 exclude
-# @board px4_fmu-v3 exclude
-# @board px4_fmu-v4 exclude
-# @board px4_fmu-v4pro exclude
-# @board px4_fmu-v5 exclude
-# @board px4_fmu-v5x exclude
-# @board bitcraze_crazyflie exclude
-#
-
-. ${R}etc/init.d/rc.mc_defaults
-
-#
-# Load default params for this platform
-#
-
-# Set all params here, then disable autoconfig
-param set-default EKF2_GPS_POS_X -0.06
-param set-default EKF2_GPS_POS_Z -0.1
-param set-default EKF2_MIN_OBS_DT 50
-
-param set-default EKF2_BARO_GATE 10
-param set-default EKF2_BARO_NOISE 5
-param set-default EKF2_ACC_NOISE 0.7
-
-param set-default LNDMC_Z_VEL_MAX 2
-
-param set-default MC_ROLL_P 8
-param set-default MC_ROLLRATE_P 0.13
-param set-default MC_ROLLRATE_I 0.07
-param set-default MC_ROLLRATE_D 0.0012
-param set-default MC_ROLLRATE_MAX 360
-param set-default MC_PITCH_P 8
-param set-default MC_PITCHRATE_P 0.13
-param set-default MC_PITCHRATE_I 0.07
-param set-default MC_PITCHRATE_D 0.0012
-param set-default MC_PITCHRATE_MAX 360
-param set-default MC_YAW_P 4
-param set-default MC_YAWRATE_P 0.12
-param set-default MC_YAWRATE_I 0.05
-param set-default MC_YAWRATE_D 0
-
-param set-default MPC_LAND_SPEED 0.7
-param set-default MPC_MANTHR_MIN 0.04
-param set-default MPC_THR_HOVER 0.5
-param set-default MPC_THR_MAX 0.94
-param set-default MPC_THR_MIN 0.1
-param set-default MPC_XY_CRUISE 8
-param set-default MPC_XY_P 1.5
-param set-default MPC_XY_VEL_P_ACC 3
-param set-default MPC_Z_P 1.5
-param set-default MPC_Z_VEL_P_ACC 16
-param set-default MPC_Z_VEL_I_ACC 3
-param set-default MPC_Z_VEL_MAX_DN 4
-param set-default MPC_Z_VEL_MAX_UP 5
-
-# TELEM2 config
-param set-default MAV_1_CONFIG 102
-param set-default MAV_1_RATE 80000
-param set-default MAV_1_FORWARD 1
-param set-default SER_TEL2_BAUD 921600
-
-if ! param greater SYS_HITL 0
-then
-	tap_esc start -d /dev/ttyS0 -n 4
-	usleep 300000
-
-	set OUTPUT_MODE tap_esc
-fi
-
-set MIXER quad_x
-set USE_IO no
-
@@ -17,7 +17,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -15,7 +15,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 #
 # @maintainer Hyon Lim <lim@uvify.com>
 #
@@ -8,7 +8,6 @@
 # @maintainer Anton Matosov <anton.matosov@gmail.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -12,7 +12,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -19,7 +19,6 @@
 # @maintainer Ricardo Marques <marques.ricardo17@gmail.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -17,7 +17,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -8,7 +8,6 @@
 # @maintainer Oleg Kalachev <okalachev@gmail.com>
 #
 # @board px4_fmu-v2 exclude
-# @board intel_aerofc-v1 exclude
 # @board bitcraze_crazyflie exclude
 #

@@ -13,7 +13,6 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 #
 . ${R}etc/init.d/rc.mc_defaults

@@ -13,15 +13,16 @@
 # @board px4_fmu-v4pro exclude
 # @board px4_fmu-v5 exclude
 # @board px4_fmu-v5x exclude
-# @board intel_aerofc-v1 exclude
 #
 . ${R}etc/init.d/rc.mc_defaults

 set MIXER quad_x_cw
 set PWM_OUT 1234

-param set-default SYS_MC_EST_GROUP 3
+param set-default SYS_MC_EST_GROUP 2
 param set-default SYS_HAS_MAG 0
+param set-default EKF2_AID_MASK 2
+param set-default EKF2_MAG_TYPE 5

 param set-default BAT_N_CELLS 1
 param set-default BAT1_N_CELLS 1
@@ -59,7 +60,7 @@ param set-default MPC_MAX_FLOW_HGT 3
 param set-default NAV_RCL_ACT 3

 param set-default PWM_MAIN_DISARM 0
-param set-default PWM_MAIN_MIN 0
+param set-default PWM_MAIN_MIN 20
 param set-default PWM_MAIN_MAX 255

 # Run the motors at 328.125 kHz (recommended)
--- a/Show More
+++ b/Show More
				`@@ -0,0 +1 @@`
				`mixer append /dev/pwm_output0 etc/mixers-sitl/package_drop.aux.mix`