Khalil L
129c0f188a
hkust_nxt-dual: fix ADC_BATTERY_CURRENT channel mismatch
2024-11-19 22:57:53 -05:00
Jacob Dahl
7a7240c3a2
ark: update v6x and fpv bootloaders ( #23980 )
...
* ark_fmu-v6x: update bootloader binary
* ark_fpv: update bootloader binary
2024-11-19 14:28:33 -07:00
Jacob Dahl
5f57b23477
ark_fpv: added fixed wing to board config ( #23967 )
2024-11-18 20:27:49 -07:00
Jacob Dahl
c6803166d1
boards: cubeorange: fix dma map label ( #23953 )
2024-11-15 21:17:43 -05:00
PX4 BuildBot
a85a9eccf7
boards: update all NuttX defconfigs
2024-11-15 21:14:12 -05:00
PX4 BuildBot
ccd32cc13f
update all px4board kconfig
2024-11-15 21:13:34 -05:00
Hubert
2ce390a780
boards: new micoair h743-aio board
...
Co-authored-by: Minderring <1701213518@sz.edu.pku.cn>
2024-11-15 15:30:09 -05:00
Hubert
29085b18ad
boards/micoair/h743: remove osd in micoair743 config file
...
Co-authored-by: Minderring <1701213518@sz.edu.pku.cn>
2024-11-15 15:28:42 -05:00
Vincent Poon
1b163b5e4d
Update KakuteH7 mini board_id in hw_config.h
...
Update KakuteH7 mini board_id in hw_config.h
2024-11-12 11:48:34 +13:00
Silvan Fuhrer
d206de0a58
imxrt_flexspi_nor_boot: add new line at end of file
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-11-11 11:33:54 +01:00
alexklimaj
b35ec38dda
boards: ark fpv fix current adc
2024-11-09 21:13:25 -05:00
Peter van der Perk
b37a31b3a1
Tropic-community: Rename board
2024-11-06 17:28:35 -05:00
Peter van der Perk
80edb91c01
boards: tropic store param on sdcard
...
Tropic doesn't have a mtd, store param on sdcard instead
2024-11-06 17:28:35 -05:00
Peter van der Perk
5d29c7811b
imxrt: tone_alarm: Add FlexPWM based Tone alarm driver
2024-11-06 17:28:35 -05:00
Peter van der Perk
df54caba1e
tropic: enable dshot
2024-11-06 17:28:35 -05:00
Peter van der Perk
8f2ede870e
tropic: fix system power
2024-11-06 17:28:35 -05:00
Peter van der Perk
5bec4d7aae
Initial support for Tropic VMU
2024-11-06 17:28:35 -05:00
Alex Klimaj
ee79d4cdfc
boards: ark fpv change bootloader uart to telem1 ( #23898 )
2024-11-05 12:06:36 -09:00
Alex Klimaj
a41a8e8924
boards: ark fpv add SCH16T ( #23883 )
...
* boards: ark fpv add SCH16T
* boards: ark fpv fix spi6
2024-11-04 09:00:41 -09:00
Julian Oes
b9bca9fa94
boards: Add Holybro H-Flow ( #23865 )
2024-10-30 13:42:03 -04:00
zhaosheng.tan
4b4a60b54c
boards: fixed board ap-h743v2 ADC_BATTERY_CURRENT_CHANNEL issue, the correct channel is 8.
2024-10-30 12:15:41 -04:00
Alex Klimaj
4d1c65d722
boards: new ARK FPV FC ( #23830 )
...
* add new payload power switch (RC_MAP_PAY_SW)
2024-10-30 11:35:35 -04:00
Julian Oes
84bb6d1730
boards: add Septentrio GNSS drivers to 6XRT
2024-10-23 11:05:49 -04:00
Julian Oes
2e6356bb9f
boards: add Sepentrio GNSS drivers to 6C and 6X
2024-10-23 11:05:49 -04:00
Julian Oes
4d4c5ef7f3
boards: change board ID of KakuteH7 mini ( #23832 )
...
* boards: change board ID of KakuteH7 mini
Holybro would like to consolidate the board ID to what is used in
ArduPilot.
* boards: update KakuteH7mini bootloader
This is due to the board ID change.
2024-10-22 09:22:33 +13:00
Julian Oes
efbd01c3c2
Add IMU compatible for KakuteH7Mini ( #23831 )
...
Co-authored-by: jamming <jianbing.pan@holybro.com>
2024-10-22 09:22:16 +13:00
Vincent Poon
e2e435af7c
kakuteh7: enable EKF2 external vision
...
to make it consistent with kakuteh7v2/mini
https://github.com/PX4/PX4-Autopilot/pull/23803
2024-10-17 10:51:46 +02:00
Julian Oes
9031f44eba
kakuteh7v2/mini: enable EKF2 external vision
...
We can enable it given there is flash space available.
2024-10-11 13:41:59 -04:00
Julian Oes
fd2b3aeec8
fmu-v6x: disable external baro ms5611 ( #23650 )
...
Otherwise, this will conflict with the MS5525DSO airspeed sensor.
2024-10-11 11:04:15 +13:00
PX4 BuildBot
01445feacc
update all px4board kconfig
2024-10-02 15:09:29 -04:00
PX4 BuildBot
51702efe94
boards: update all NuttX defconfigs
2024-10-02 15:08:38 -04:00
alexklimaj
73c4ff302e
boards: arkv6x remove CONFIG_COMMON_OPTICAL_FLOW
2024-09-26 14:13:20 -04:00
alexklimaj
a1944e26ec
boards: arkv6x add back sd_bench
2024-09-26 14:13:20 -04:00
tompsontan
63b44eac06
boards: add new board X-MAV AP-H743v2
2024-09-26 14:12:35 -04:00
Alexander Lerach
368bfc5643
boards/px4: v5x/v6x always start board_adc
2024-09-26 13:55:13 -04:00
Liu1
b2c8f0539e
boards: add new cuav 7-nano
2024-09-25 11:47:35 -04:00
ZeroOne-Aero
1850cf5715
boards: new board support ZeroOne x6
2024-09-25 10:55:39 -04:00
Daniele Pettenuzzo
35239c48a2
Board: Fix fmu rc_input on v5x and v6x ( #23175 )
...
Co-authored-by: Niklas Hauser <niklas@auterion.com>
2024-09-25 15:57:46 +02:00
chfriedrich98
0e65679c9e
Mecanum rover: add dedicated module for mecanum rovers ( #23708 )
2024-09-25 09:35:41 +02:00
vertiq-jordan
06dfc4b782
drivers/actuators: new vertiq_io driver ( #22892 )
...
* brought in the Vertiq Cpp API as a submodule. updated the serial rx handling so that we can parse out IQUART data packets
---------
Co-authored-by: Luca Scheuer <scheuer.luca@gmail.com>
2024-09-24 11:44:35 -04:00
Silvan Fuhrer
cacbfcecd8
aiframes: remove setting of CBRK_IO_SAFETY to enabeld, as that's already the param default ( #23702 )
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-09-23 09:10:02 +02:00
BazookaJoe1900
4d83badba1
fix files tags on the header comments ( #23564 )
2024-09-19 09:25:18 +03:00
Daniel Agar
e4dd3f2871
boards/px4/fmu-v5: stackcheck remove FW modules (flash overflow)
2024-09-18 11:34:48 -04:00
Silvan Fuhrer
1c9c5e51c2
boards: cuav x7pro: remove build of ROVER and Q_ATTITUDE_ESTIMATOR to save flash
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2024-09-16 09:11:23 +02:00
Julian Oes
b7c5ba1752
boards: make flash space for remote ID over DroneCAN
2024-09-02 16:20:10 +12:00
Daniel Agar
5b0014cb06
ekf2: remove legacy accel z bias checks ( #23341 )
...
Co-authored-by: Mathieu Bresciani <brescianimathieu@gmail.com>
2024-08-29 11:51:27 -04:00
Alexis Guijarro
c8501cc1d0
boards: Support for 3DR Control Zero H7 OEM Rev G board
2024-08-14 19:52:42 -04:00
Alexis Guijarro
f4f93118e6
mRo boards: Fix for USART clock selection
2024-08-09 11:59:38 -04:00
Niklas Hauser
cd231d0eed
fmuv6x: Add GPIO expander to check overcurrent pins
2024-08-08 13:14:11 -04:00
Julian Oes
2d99ae18ad
stm32h7: Reset USART clock selection ( #23498 )
...
This resets the USARTs' clock source selection to the default, in case
it has been changed by the bootloader.
This is required if booting from the ArduPilot bootloader which happens
to reset the clock selection to PLL.
Without this fix, UARTs (including the console) is garbled, so
presumably at an invalid baudrate.
2024-08-07 11:41:50 -04:00
