fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-04-14 10:07:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
26,988 Commits 852 Branches 161 Tags
Commit Graph

1682 Commits

Author SHA1 Message Date
Beat Küng
a6f93c30d9 Revert "Move px4io firmware update logic block to rc.io." 
This reverts commit 0928112a80d816eb82bbb3d05db01d19fc14d472.
 2018-08-03 10:46:12 -04:00
Beat Küng
5437d55518 rc.sensors: try to start ist8310 on PX4FMU_V2 
The Pixhack v3 comes with an external IST8310 in the GPS.
 2018-08-02 16:09:36 +02:00
Beat Küng
8ef4f12b61 rc.sensors: fix BOARD_FMUV3, it was unset too early 
It's used further down again.
 2018-08-02 16:09:36 +02:00
mcsauder
0928112a80 Move px4io firmware update logic block to rc.io. 2018-08-02 12:19:23 +02:00
Daniel Agar
ad41744670 wind_estimator add param to enable and start 2018-08-02 08:07:01 +02:00
mcsauder
1fe526b8eb Updated and added full stops to comments and did some comment/whitespace formatting in the startup scripts. 2018-07-31 09:06:03 +02:00
Daniel Agar
658237f36a px4fmu move RC input to new rc_input driver 2018-07-30 10:32:56 -04:00
Daniel Agar
4e05f26659 ms4525 driver extend to support ms4515 2018-07-30 10:24:40 +02:00
mcsauder
ac8f44268b Added remaining two channels of PWM_AUX_DIS disarm parameter set commands, remove trailing whitespace from pwm_params_aux.c and pwm_params_main.c, gps/params.c and added block comment headers to separate sections instead of whitespace. 2018-07-30 09:36:44 +02:00
Daniel Agar
28610a2b62 AV-X lps22hb only start on SPI 2018-07-30 00:36:05 -04:00
mcsauder
8da1e67050 Move OUTPUT_MODE logic from rcS to rc.interface. 2018-07-26 08:17:52 +02:00
Daniel Agar
5ec010372c rcS preserve accel, gyro, and temp cal parameters 2018-07-25 07:48:19 +02:00
mcsauder
ee3e34cd06 Move UART mapping comments back to top level rcS script. Deprecate PWM_ACHDIS and replace with PWM_AUX_OUT and set PWM_AUX_DIS value directly in vtol airframe config files. Replace tone_alarm instances with tune_control and default tune enums, and relocate an OUTPUT_MODE == fmu logic block in rcS. 2018-07-24 18:44:55 +02:00
Daniel Agar
4818e3abe0 ROMFS cmake combine copy, rc.autostart, prune steps 2018-07-24 10:50:24 -04:00
Daniel Agar
1481015675 ROMFS cmake update dependency handling 2018-07-24 09:12:44 +02:00
Beat Küng
3f615695b6 ROMFS: fix some cmake issues 
- every incremental rebuild extended ${config_romfs_files_list}, the
  chached variable was never reset
- cmake -E copy_directory did not remove deleted files

remaining issue: removing a file from the ROMFS & px4_add_romfs_files()
does not trigger the px_romfs_pruner.py COMMANDs to be re-executed.
 2018-07-23 18:23:46 +02:00
Beat Küng
3f03288a95 omnibus: add support for Hobbywing XRotor F4 G2 
It has an ICM-20602 IMU
 2018-07-23 11:04:17 +02:00
mcsauder
ec16a4d063 Migrate LOGGER_BUF argument to rc.logging, group OUTPUT_MODE instances closer together by relocating UAVCAN logic block in rcS, and alphabetize hardware specific logic in rc.sensors. 2018-07-20 19:01:33 +02:00
Matthias Grob
cc0bc05156 mc_att_control: remove useless parameter MC_YAW_FF 
It scales the yawspeed setpoint arbitrarily by default with 0.5.
This makes no sense because when you give a setpoint of 1rad/s then
you expect the setpoint to get executed. If you want manual yawspeed
response to be less agressive on the stick use the scaling parameter
for the stick MPC_MAN_Y_MAX.
 2018-07-20 09:26:18 +02:00
mcsauder
4f937a2ff6 Migrate px4io logic into rc.io. 2018-07-19 13:56:03 +02:00
mcsauder
bccda56ed3 Re-order hardware specific logic in rc.interface. 2018-07-19 10:35:18 +02:00
mcsauder
6f63553824 Move MNT_MODE_IN / MOUNT_MODE_OUT logic block to rc.interface and move dataman, send_event, and load_mon startup just below uorb and tone_alarm startup in the rcS script. 2018-07-19 10:35:18 +02:00
mcsauder
1fa2a6d26e Continued work to group/condense/consolidate logic in rcS. 2018-07-19 10:35:18 +02:00
mcsauder
1d7dbdddca Add pwm failsafe -c argument to rc.interface, reference issue #9775. 2018-07-18 08:05:31 +02:00
mcsauder
71ceb0cfd6 Copy/paste logic in rc.interface to group MIXER and MIXER_AUX logic, alphabetize hardware list in rc.interface, alphabetize set/unset lists in rcS, and add -p argument to pwm failsafe calls per issue #9775. 2018-07-18 08:05:31 +02:00
mcsauder
f9a6c13d55 Group instances of UAVCAN logic into a single block and copy/paste/regroup OUTPUT_MODE logic to form on block of code handling OUTPUT_MODE. 2018-07-17 09:33:50 +02:00
mcsauder
e2eb84042e Group hardware specific logic in rcS, deprecate the MODE parameter from rcS, and update comments. 2018-07-16 16:43:01 +02:00
mcsauder
ab788ceba7 Update sd card logic statment and comment. 2018-07-13 11:02:26 +02:00
mcsauder
f2970071a7 Acronym correction. 2018-07-13 11:02:26 +02:00
mcsauder
2512f6e30e Format and comment fw, mc, vtol, and ugv vehicle apps and default startup scripts. 2018-07-13 11:02:26 +02:00
Daniel Agar
8537863848 delete sdlog2 2018-07-13 09:02:59 +02:00
Mark Sauder
72de9a901d Move additional logic block to rc.vehicle_setup, add rc.vehicle_setup to init.d/CMakeLists.txt, and relocate sd card logic block higher up in rcS. (#9896) 2018-07-12 16:45:19 -04:00
Mark Sauder
bb86c5f200 Breakout rc.vehicle_setup from rcS. (#9892) 2018-07-12 14:50:47 -04:00
mcsauder
e12acc4b28 Migrate hardware specific mavlink stream cases to rc.mavlink. 2018-07-12 08:10:59 +02:00
mcsauder
8b71bb4562 Breakout rc.mavlink from rcS script. 2018-07-11 09:38:58 +02:00
mcsauder
9386ab6afe Breakout rc.thermal_cal from rcS and group set/unset parameters at the beginning and end of the rcS script. Revert commit 2a3d66cf457e9b7879276bd01be7936876b56147 to reduce px4fmu-v2_default flash size. Standardize tabs/whitespaces across all files in the init.d directory. 2018-07-10 08:59:38 -04:00
Beat Küng
58c8c50174 frsky_telemetry: add scanning timeout parameter, and set it to 15s 
This frees unused RAM in case frsky telemetry is not connected.
 2018-07-08 23:24:17 +02:00
Daniel Agar
00c34d8a2b AV-X board support 2018-07-08 10:18:13 -04:00
DanielePettenuzzo
e15d390f65 rc.sensors: fix 2018-07-03 17:33:18 +02:00
DanielePettenuzzo
0cc5a41bb8 rc.sensors: start all i2c distance sensor with -a flag 2018-07-03 17:33:18 +02:00
Roman
e1117d175b ROMFS: updated deltaquad autoconfig params 
Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-03 08:53:30 +02:00
Hamish Willee
7402d8223b Fix up references to pixhawk.org 2018-07-02 13:11:15 +02:00
Roman
863cd52714 ROMFS: fixed some naming inconsistencies for the HITL VTOL model 
Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-02 13:09:35 +02:00
Roman
220068acb6 ROMFS: use more appropriate autostart ID for standard vtol hitl 
Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-02 13:09:35 +02:00
Roman
d70e90f174 ROMFS: remove unnecessary params from hitl vtol config 
Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-02 13:09:35 +02:00
Roman
b37ff23708 ROMFS: indicate that the hitl vtol config is for the gazebo standard vtol model 
Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-02 13:09:35 +02:00
Roman
1dea998be5 ROMFS: clean up quad x tailsitter mixer files 
- use mixer for the simulation to the sitl mixer dir
- do not use virtual elevator in the mixer for the real vehicle

Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-02 13:09:35 +02:00
Roman
484a939779 added MAV_TYPE to standard vtol hitl config 
Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-02 13:09:35 +02:00
Roman
9546daadea ROMFS: added autostart and mixer file for standard vtol in hitl 
Signed-off-by: Roman <bapstroman@gmail.com>
 2018-07-02 13:09:35 +02:00
Mark Sauder
d3c169b1e0 Fix whitespaces in PreflightCheck.cpp, tilt_quad.aux.mix, and tilt_quad.main.mix 2018-06-28 20:20:32 -04:00