fly316/PX4-Autopilot
7
0
Fork 0
mirror of https://gitee.com/mirrors_PX4/PX4-Autopilot.git synced 2026-10-16 10:23:34 +08:00
Code Issues Packages Projects Releases Wiki Activity
41,829 Commits 852 Branches 161 Tags
45912066d2a6883a82be066469586e7c845bf262
Commit Graph
375 Commits
Author SHA1 Message Date
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
Daniel Agar 7f7dfea998 drivers/imu/analog_devices: experimental support for new ADIS16507 IMU (untested) 2023-01-07 10:56:30 -05:00
Julian Oes 21f49ff5be drivers: fix two includes for CLion 
This fixes two errors where CLion complains:

error: 'size_t' does not name a type
 2022-10-31 07:56:59 +01:00
Hamish Willee 022aa13aa1 mpu9250_i2c - also needs docs update 2022-10-05 20:26:25 -04:00
Hamish Willee 6d612b1ba4 MPU9250 driver doc incorrect 2022-10-05 20:26:25 -04:00
Daniel Agar b7fab39165 icm20948_i2c_passthrough: PX4_ERR is reset/configure fails and check temperature for validity 2022-09-23 19:16:10 -04:00
Igor Mišić 296b1704c5 invensense/icm42688p: add additional state FIFO_RESET 
This state is added to give extra time between  FIFO flush command. Some icm42688p IMUs need more time between config -> FIFO reset -> FIFO read. More about the issue  #20181
 2022-09-09 16:19:10 -04:00
Daniel AgarandKabir Mohammed 1c72f86761 Update src/drivers/imu/analog_devices/adis16470/ADIS16470.cpp 
Co-authored-by: Kabir Mohammed  <kabir@corvus-robotics.com>
 2022-08-16 08:40:43 -04:00
Daniel Agar 49d87f1907 adis16470: fix accel and gyro scaling 2022-08-16 08:40:43 -04:00
Daniel Agar 7f2fea1cca mpu9250: try all I2C addresses if not manually specified 2022-08-09 13:06:40 -04:00
Daniel Agar 0bce1ef573 drivers/imu: new TDK IIM-42652 IMU support 2022-08-08 13:51:39 -04:00
Hamish Willee e6eed43648 Spelling errors (#19935) 2022-07-27 14:33:16 +10:00
Beat Küng f22dc80ecc system: add missing includes (added indirectly via visibility.h for normal builds) 2022-07-20 01:14:04 -04:00
Daniel Agar c71cc5b815 drivers/imu/bosch: new BMI085 driver 
- very similar to the BMI088 with minor differences in accel range
 2022-07-14 18:20:13 -04:00
Daniel Agar d25a784a3a icm42688p: only check configured registers periodically (as intended) 2022-05-23 14:58:23 -04:00
Daniel Agar ff16131874 icm42670p run at full speed 2022-05-17 08:14:22 -07:00
Daniel Agar 83daf648ef drivers/imu/invensense/icm42670p: cleanup and small fixes 2022-05-17 08:14:22 -07:00
Daniel Agar 8df3932d6a icm20948: disable debug output (_debug_enabled=true) 2022-04-24 15:45:51 -04:00
mcsauder fef47513f5 Add gyro and accel range register values to the icm42688p driver. 2022-04-22 21:03:01 -04:00
Daniel Agar 0c31f63896 sensors: add baro calibration and cleanup 
- sensor_baro.msg use SI (pressure in Pascals)
 - update all barometer drivers to publish directly and remove PX4Barometer helper
 - introduce baro cal (offset) mainly as a mechanism to adjust
relative priority
 - commander: add simple baro cal that sets baro offsets to align with
GPS altitude (if available)
 - create new sensors_status.msg to generalize sensor reporting
 2022-03-26 16:08:41 -04:00
Daniel Agar b66dd5ffa6 adis16470: fix gyro scaling 2022-03-09 23:00:54 -05:00
ShiauweiZhao 8549fadb6c add icm42670p driver kconfig 2022-02-25 12:21:06 -05:00
Viktor Vladic f4d02a2937 MatekH743 board_id, usb vid/pid changes, and MPU6000 delay before transfer - not after (#18733) 
* Make board_id compatible with ardupilot
 * Initialize outputs for CAM1/CAM2 and Vsw pad
 * Correct board type 1013 in bootloader to match AP
 * Change usb vendor string to "Matek"
 * Change cdcacm pid to 1013
 * Comment out FLASH_BASED_PARAMS because of #15331
 2022-02-07 19:55:49 -05:00
Daniel Agar e731fcdbc0 sensors (accel/gyro/mag) determine if external with device id 2022-01-10 10:31:07 -05:00
Daniel Agar a5f58d321e boards: emlid_navio_default fix missing drivers/modules 2021-12-23 15:57:11 -05:00
Matthias Grob 68e2940f58 math: support max of three values additional to min and use it everywhere 2021-12-07 21:06:51 +01:00
Daniel Agar 9ab633c18f drivers/imu/invensense: check register bank during probe if necessary 
- the WHO_AM_I is only accessible in register bank 0, which might not
be currently selected if the sensor didn't have a clean reset
 2021-12-06 10:22:54 -05:00
Viktor Vladic 02709fcfab Fixes for MPU6000 and MatekH743-slim board 
- MPU6000: Added 10us delay for R/W of slow registers
 - Board: Fixed DRDY pin from PB1 to PB2
 2021-11-11 08:40:41 -05:00
Daniel Agar 67437396f1 mpu6000: add USER_CTRL I2C_MST_EN bit to checked registers 2021-11-04 21:22:14 -04:00
Daniel Agar 8fbb241c2e mpu6000: add gyro/accel self test bits to checked registers 2021-11-04 21:22:14 -04:00
Daniel Agar 12c7056ae5 drivers/imu: icm20602/icm20649/icm20948 remove timestamp_sample adjustments 2021-10-14 16:37:11 -04:00
Daniel Agar 4559230de6 drivers/imu/invensense: adjust icm20602/icm20649/icm20948 rescheduling logic 
- this handles the case where the driver might be more than one full
transfer cycle behind
 2021-10-14 09:17:11 -04:00
Peter van der Perk 0571932e7c [Kconfig] Backport rebase config changes 2021-10-07 10:09:01 -04:00
Peter van der Perk f7803fb686 [Kconfig] Bloaty 2nd pass 2021-10-07 10:09:01 -04:00
Peter van der Perk 815617e670 Added common options for sensor drivers 
uavcan_board_identity check for existance
Added kconfig for compiler definitions
 2021-10-07 10:09:01 -04:00
Peter van der Perk b7f03cec5e [Kconfig] Add FMU-V5 and PX4-IOv2 px4board config 2021-10-07 10:09:01 -04:00
Peter van der Perk 4e4aabc03f Update Kconfig after rebasing 03-05-21 2021-10-07 10:09:01 -04:00
Peter van der Perk d5e3e9a7bc [Kconfig] Decompose Kconfig, now each module has its own Kconfig 
Which is better for versioning and decomposability
 2021-10-07 10:09:01 -04:00
Peter van der Perk 4044fbd4a0 Initial Kconfig implementation in CMake 
Used fmuk66-v3 as test case
 2021-10-07 10:09:01 -04:00
Daniel Agar b5d401b20c drivers/imu: ensure timestamp_sample adjustment isn't done as float (continued) 2021-10-06 10:19:01 -04:00
Daniel Agar dc1b423721 drivers/imu: ensure timestamp_sample adjustment isn't done as float 
- larger HRT timestamps can't be represented exactly when cast to float
 2021-10-06 09:26:26 -04:00
Daniel Agar e6552370ab imu/invensense: adjust scheduling dynamically if not using data ready interrupt 2021-09-12 17:34:35 -04:00
ShiauweiZhaoandzhaoxiaowei 686bcff8a7 new TDK ICM42670p IMU driver support (#18141) 
Co-authored-by: zhaoxiaowei <zhaoxiaowei@efy-tech.com>
 2021-09-08 10:24:22 -04:00
Daniel Agar 5c7882b787 icm42688p: properly disable anti-aliasing and notch filter 2021-09-08 10:20:57 -04:00
Daniel Agar a397004bf8 adis16448: add additional delay after transfer in case of back to back transcations 
- add verified register read method
 2021-08-08 06:25:16 -07:00
Daniel Agar b1eb762753 drivers/imu: set sample timestamp from interrupt (if available) 
- minor scheduling improvements
   - if expected number of samples larger than expected adjust timestamp sample and save sample for next iteration
   - when scheduling via data ready interrupt (with no FIFO watermark) count continuously without clearing
 2021-07-21 02:19:11 -04:00
Daniel Agar 883624d915 lib/geo: move from ecl 2021-07-15 10:38:24 -04:00
Beat Küng e644036325 drivers: use updated I2C SPI driver interface 2021-07-08 12:59:35 -04:00
Jaeyoung-Lim e45b862f1d Specify orientaiton of ADIS16448 IMU from rc.sensors 
Specify orientaiton of ADIS16448 IMU for from the rc.sensors

WIP: Currently only handling one orientation
 2021-06-30 09:34:12 -04:00
Daniel Agar 7ddcb7fe3c adis16470: disable debug 2021-06-30 01:01:07 -04:00