mirror of
https://gitee.com/mirrors_PX4/PX4-Autopilot.git
synced 2026-04-14 10:07:39 +08:00
drivers/imu/analog_devices: experimental support for new ADIS16507 IMU (untested)
This commit is contained in:
Daniel Agar
GitHub
parent
f520d4b3be
commit
7f7dfea998
@ -19,6 +19,7 @@ CONFIG_DRIVERS_DSHOT=y
|
||||
CONFIG_DRIVERS_GPS=y
|
||||
CONFIG_DRIVERS_HEATER=y
|
||||
CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16448=y
|
||||
CONFIG_DRIVERS_IMU_ANALOG_DEVICES_ADIS16507=y
|
||||
CONFIG_DRIVERS_IMU_BOSCH_BMI088=y
|
||||
CONFIG_DRIVERS_IMU_INVENSENSE_ICM20602=y
|
||||
CONFIG_DRIVERS_IMU_INVENSENSE_ICM20649=y
|
||||
|
||||
@ -124,6 +124,7 @@
|
||||
#define DRV_IMU_DEVTYPE_ADIS16448 0x57
|
||||
#define DRV_IMU_DEVTYPE_ADIS16470 0x58
|
||||
#define DRV_IMU_DEVTYPE_ADIS16477 0x59
|
||||
#define DRV_IMU_DEVTYPE_ADIS16507 0x5A
|
||||
|
||||
#define DRV_BARO_DEVTYPE_MPC2520 0x5F
|
||||
#define DRV_BARO_DEVTYPE_LPS22HB 0x60
|
||||
|
||||
512
src/drivers/imu/analog_devices/adis16507/ADIS16507.cpp
Normal file
512
src/drivers/imu/analog_devices/adis16507/ADIS16507.cpp
Normal file
@ -0,0 +1,512 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2022 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "ADIS16507.hpp"
|
||||
|
||||
using namespace time_literals;
|
||||
|
||||
static constexpr int16_t combine(uint8_t msb, uint8_t lsb)
|
||||
{
|
||||
return (msb << 8u) | lsb;
|
||||
}
|
||||
|
||||
ADIS16507::ADIS16507(const I2CSPIDriverConfig &config) :
|
||||
SPI(config),
|
||||
I2CSPIDriver(config),
|
||||
_drdy_gpio(config.drdy_gpio),
|
||||
_px4_accel(get_device_id(), config.rotation),
|
||||
_px4_gyro(get_device_id(), config.rotation)
|
||||
{
|
||||
if (_drdy_gpio != 0) {
|
||||
_drdy_missed_perf = perf_alloc(PC_COUNT, MODULE_NAME": DRDY missed");
|
||||
}
|
||||
}
|
||||
|
||||
ADIS16507::~ADIS16507()
|
||||
{
|
||||
perf_free(_reset_perf);
|
||||
perf_free(_bad_register_perf);
|
||||
perf_free(_bad_transfer_perf);
|
||||
perf_free(_perf_crc_bad);
|
||||
perf_free(_drdy_missed_perf);
|
||||
}
|
||||
|
||||
int ADIS16507::init()
|
||||
{
|
||||
int ret = SPI::init();
|
||||
|
||||
if (ret != PX4_OK) {
|
||||
DEVICE_DEBUG("SPI::init failed (%i)", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return Reset() ? 0 : -1;
|
||||
}
|
||||
|
||||
bool ADIS16507::Reset()
|
||||
{
|
||||
_state = STATE::RESET;
|
||||
DataReadyInterruptDisable();
|
||||
ScheduleClear();
|
||||
ScheduleNow();
|
||||
return true;
|
||||
}
|
||||
|
||||
void ADIS16507::exit_and_cleanup()
|
||||
{
|
||||
DataReadyInterruptDisable();
|
||||
I2CSPIDriverBase::exit_and_cleanup();
|
||||
}
|
||||
|
||||
void ADIS16507::print_status()
|
||||
{
|
||||
I2CSPIDriverBase::print_status();
|
||||
|
||||
perf_print_counter(_reset_perf);
|
||||
perf_print_counter(_bad_register_perf);
|
||||
perf_print_counter(_bad_transfer_perf);
|
||||
perf_print_counter(_perf_crc_bad);
|
||||
perf_print_counter(_drdy_missed_perf);
|
||||
}
|
||||
|
||||
int ADIS16507::probe()
|
||||
{
|
||||
// Power-On Start-Up Time 310 ms
|
||||
if (hrt_absolute_time() < 310_ms) {
|
||||
PX4_WARN("required Power-On Start-Up Time 310 ms");
|
||||
}
|
||||
|
||||
const uint16_t PROD_ID = RegisterRead(Register::PROD_ID);
|
||||
|
||||
if (PROD_ID != Product_identification) {
|
||||
DEVICE_DEBUG("unexpected PROD_ID 0x%02x", PROD_ID);
|
||||
return PX4_ERROR;
|
||||
}
|
||||
|
||||
const uint16_t SERIAL_NUM = RegisterRead(Register::SERIAL_NUM);
|
||||
const uint16_t FIRM_REV = RegisterRead(Register::FIRM_REV);
|
||||
const uint16_t FIRM_DM = RegisterRead(Register::FIRM_DM);
|
||||
const uint16_t FIRM_Y = RegisterRead(Register::FIRM_Y);
|
||||
|
||||
PX4_INFO("Serial Number: 0x%X, Firmware revision: 0x%X Date: Y %X DM %X", SERIAL_NUM, FIRM_REV, FIRM_Y, FIRM_DM);
|
||||
|
||||
return PX4_OK;
|
||||
}
|
||||
|
||||
void ADIS16507::RunImpl()
|
||||
{
|
||||
const hrt_abstime now = hrt_absolute_time();
|
||||
|
||||
switch (_state) {
|
||||
case STATE::RESET:
|
||||
perf_count(_reset_perf);
|
||||
// GLOB_CMD: software reset
|
||||
RegisterWrite(Register::GLOB_CMD, GLOB_CMD_BIT::Software_reset);
|
||||
_reset_timestamp = now;
|
||||
_failure_count = 0;
|
||||
_state = STATE::WAIT_FOR_RESET;
|
||||
ScheduleDelayed(255_ms); // 255 ms Reset Recovery Time
|
||||
break;
|
||||
|
||||
case STATE::WAIT_FOR_RESET:
|
||||
|
||||
if (_self_test_passed) {
|
||||
if ((RegisterRead(Register::PROD_ID) == Product_identification)) {
|
||||
// if reset succeeded then configure
|
||||
_state = STATE::CONFIGURE;
|
||||
ScheduleNow();
|
||||
|
||||
} else {
|
||||
// RESET not complete
|
||||
if (hrt_elapsed_time(&_reset_timestamp) > 1000_ms) {
|
||||
PX4_DEBUG("Reset failed, retrying");
|
||||
_state = STATE::RESET;
|
||||
ScheduleDelayed(100_ms);
|
||||
|
||||
} else {
|
||||
PX4_DEBUG("Reset not complete, check again in 100 ms");
|
||||
ScheduleDelayed(100_ms);
|
||||
}
|
||||
}
|
||||
|
||||
} else {
|
||||
RegisterWrite(Register::GLOB_CMD, GLOB_CMD_BIT::Sensor_self_test);
|
||||
_state = STATE::SELF_TEST_CHECK;
|
||||
ScheduleDelayed(14_ms); // Self Test Time
|
||||
}
|
||||
|
||||
break;
|
||||
|
||||
case STATE::SELF_TEST_CHECK: {
|
||||
// read DIAG_STAT to check result
|
||||
const uint16_t DIAG_STAT = RegisterRead(Register::DIAG_STAT);
|
||||
|
||||
if (DIAG_STAT != 0) {
|
||||
PX4_ERR("DIAG_STAT: %#X", DIAG_STAT);
|
||||
|
||||
} else {
|
||||
PX4_DEBUG("self test passed");
|
||||
_self_test_passed = true;
|
||||
_state = STATE::RESET;
|
||||
ScheduleNow();
|
||||
}
|
||||
}
|
||||
break;
|
||||
|
||||
case STATE::CONFIGURE:
|
||||
if (Configure()) {
|
||||
// if configure succeeded then start reading
|
||||
_state = STATE::READ;
|
||||
|
||||
if (DataReadyInterruptConfigure()) {
|
||||
_data_ready_interrupt_enabled = true;
|
||||
|
||||
// backup schedule as a watchdog timeout
|
||||
ScheduleDelayed(100_ms);
|
||||
|
||||
} else {
|
||||
_data_ready_interrupt_enabled = false;
|
||||
ScheduleOnInterval(SAMPLE_INTERVAL_US, SAMPLE_INTERVAL_US);
|
||||
}
|
||||
|
||||
} else {
|
||||
// CONFIGURE not complete
|
||||
if (hrt_elapsed_time(&_reset_timestamp) > 1000_ms) {
|
||||
PX4_DEBUG("Configure failed, resetting");
|
||||
_state = STATE::RESET;
|
||||
|
||||
} else {
|
||||
PX4_DEBUG("Configure failed, retrying");
|
||||
}
|
||||
|
||||
ScheduleDelayed(100_ms);
|
||||
}
|
||||
|
||||
break;
|
||||
|
||||
case STATE::READ: {
|
||||
hrt_abstime timestamp_sample = now;
|
||||
|
||||
if (_data_ready_interrupt_enabled) {
|
||||
// scheduled from interrupt if _drdy_timestamp_sample was set as expected
|
||||
const hrt_abstime drdy_timestamp_sample = _drdy_timestamp_sample.fetch_and(0);
|
||||
|
||||
if ((now - drdy_timestamp_sample) < SAMPLE_INTERVAL_US) {
|
||||
timestamp_sample = drdy_timestamp_sample;
|
||||
|
||||
} else {
|
||||
perf_count(_drdy_missed_perf);
|
||||
}
|
||||
|
||||
// push backup schedule back
|
||||
ScheduleDelayed(SAMPLE_INTERVAL_US * 2);
|
||||
}
|
||||
|
||||
bool success = false;
|
||||
|
||||
// TODO: review and test BURST_SEL = 1
|
||||
// 16-Bit Burst Mode with BURST_SEL = 1
|
||||
// In 16-bit burst mode with BURST_SEL = 1, a burst contains
|
||||
// calibrated delta angle and delta velocity data in 16-bit format.
|
||||
|
||||
struct BurstRead {
|
||||
uint16_t cmd;
|
||||
uint16_t DIAG_STAT;
|
||||
int16_t X_GYRO_OUT;
|
||||
int16_t Y_GYRO_OUT;
|
||||
int16_t Z_GYRO_OUT;
|
||||
int16_t X_ACCL_OUT;
|
||||
int16_t Y_ACCL_OUT;
|
||||
int16_t Z_ACCL_OUT;
|
||||
int16_t TEMP_OUT;
|
||||
uint16_t DATA_CNTR;
|
||||
uint16_t checksum;
|
||||
} buffer{};
|
||||
|
||||
// ADIS16507 burst report should be 176 bits
|
||||
static_assert(sizeof(BurstRead) == (176 / 8), "ADIS16507 report not 176 bits");
|
||||
|
||||
buffer.cmd = static_cast<uint16_t>(Register::GLOB_CMD) << 8;
|
||||
set_frequency(SPI_SPEED_BURST);
|
||||
|
||||
if (transferhword((uint16_t *)&buffer, (uint16_t *)&buffer, sizeof(buffer) / sizeof(uint16_t)) == PX4_OK) {
|
||||
|
||||
// Calculate checksum and compare
|
||||
|
||||
// Checksum = DIAG_STAT, Bits[15:8] + DIAG_STAT, Bits[7:0] +
|
||||
// X_GYRO_OUT, Bits[15:8] + X_GYRO_OUT, Bits[7:0] +
|
||||
// Y_GYRO_OUT, Bits[15:8] + Y_GYRO_OUT, Bits[7:0] +
|
||||
// Z_GYRO_OUT, Bits[15:8] + Z_GYRO_OUT, Bits[7:0] +
|
||||
// X_ACCL_OUT, Bits[15:8] + X_ACCL_OUT, Bits[7:0] +
|
||||
// Y_ACCL_OUT, Bits[15:8] + Y_ACCL_OUT, Bits[7:0] +
|
||||
// Z_ACCL_OUT, Bits[15:8] + Z_ACCL_OUT, Bits[7:0] +
|
||||
// TEMP_OUT, Bits[15:8] + TEMP_OUT, Bits[7:0] +
|
||||
// DATA_CNTR, Bits[15:8] + DATA_CNTR, Bits[7:0]
|
||||
uint8_t *checksum_helper = (uint8_t *)&buffer.DIAG_STAT;
|
||||
|
||||
uint16_t checksum = 0;
|
||||
|
||||
for (int i = 0; i < 18; i++) {
|
||||
checksum += checksum_helper[i];
|
||||
}
|
||||
|
||||
if (buffer.checksum != checksum) {
|
||||
//PX4_DEBUG("adis_report.checksum: %X vs calculated: %X", buffer.checksum, checksum);
|
||||
perf_count(_bad_transfer_perf);
|
||||
}
|
||||
|
||||
if (buffer.DIAG_STAT != DIAG_STAT_BIT::Data_path_overrun) {
|
||||
// Data path overrun. A 1 indicates that one of the
|
||||
// data paths have experienced an overrun condition.
|
||||
// If this occurs, initiate a reset,
|
||||
|
||||
//Reset();
|
||||
//return;
|
||||
}
|
||||
|
||||
// Check all Status/Error Flag Indicators (DIAG_STAT)
|
||||
if (buffer.DIAG_STAT != 0) {
|
||||
perf_count(_bad_transfer_perf);
|
||||
}
|
||||
|
||||
// temperature 1 LSB = 0.1°C
|
||||
const float temperature = buffer.TEMP_OUT * 0.1f;
|
||||
_px4_accel.set_temperature(temperature);
|
||||
_px4_gyro.set_temperature(temperature);
|
||||
|
||||
|
||||
int16_t accel_x = buffer.X_ACCL_OUT;
|
||||
int16_t accel_y = buffer.Y_ACCL_OUT;
|
||||
int16_t accel_z = buffer.Z_ACCL_OUT;
|
||||
|
||||
// sensor's frame is +x forward, +y left, +z up
|
||||
// flip y & z to publish right handed with z down (x forward, y right, z down)
|
||||
accel_y = (accel_y == INT16_MIN) ? INT16_MAX : -accel_y;
|
||||
accel_z = (accel_z == INT16_MIN) ? INT16_MAX : -accel_z;
|
||||
|
||||
|
||||
// TODO:
|
||||
// Group Delay with No Filtering: Accelerometer 1.57 ms
|
||||
const uint64_t accel_group_delay_us = 1'570;
|
||||
_px4_accel.update(timestamp_sample + accel_group_delay_us, accel_x, accel_y, accel_z);
|
||||
|
||||
|
||||
int16_t gyro_x = buffer.X_GYRO_OUT;
|
||||
int16_t gyro_y = buffer.Y_GYRO_OUT;
|
||||
int16_t gyro_z = buffer.Z_GYRO_OUT;
|
||||
// sensor's frame is +x forward, +y left, +z up
|
||||
// flip y & z to publish right handed with z down (x forward, y right, z down)
|
||||
gyro_y = (gyro_y == INT16_MIN) ? INT16_MAX : -gyro_y;
|
||||
gyro_z = (gyro_z == INT16_MIN) ? INT16_MAX : -gyro_z;
|
||||
|
||||
// TODO:
|
||||
// Group Delay with No Filtering:
|
||||
// Gyroscope (X-Axis) 1.51 ms
|
||||
// Gyroscope (Y-Axis) 1.51 ms
|
||||
// Gyroscope (Z-Axis) 1.29 ms
|
||||
const uint64_t gyro_group_delay_us = (1'510 + 1'510 + 1'290) / 3;
|
||||
_px4_gyro.update(timestamp_sample + gyro_group_delay_us, gyro_x, gyro_y, gyro_z);
|
||||
|
||||
success = true;
|
||||
|
||||
if (_failure_count > 0) {
|
||||
_failure_count--;
|
||||
}
|
||||
|
||||
} else {
|
||||
perf_count(_bad_transfer_perf);
|
||||
}
|
||||
|
||||
if (!success) {
|
||||
_failure_count++;
|
||||
|
||||
// full reset if things are failing consistently
|
||||
if (_failure_count > 10) {
|
||||
Reset();
|
||||
return;
|
||||
}
|
||||
}
|
||||
|
||||
if (!success || hrt_elapsed_time(&_last_config_check_timestamp) > 100_ms) {
|
||||
// check configuration registers periodically or immediately following any failure
|
||||
if (RegisterCheck(_register_cfg[_checked_register])) {
|
||||
_last_config_check_timestamp = now;
|
||||
_checked_register = (_checked_register + 1) % size_register_cfg;
|
||||
|
||||
} else {
|
||||
// register check failed, force reset
|
||||
perf_count(_bad_register_perf);
|
||||
Reset();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
bool ADIS16507::Configure()
|
||||
{
|
||||
// first set and clear all configured register bits
|
||||
for (const auto ®_cfg : _register_cfg) {
|
||||
RegisterSetAndClearBits(reg_cfg.reg, reg_cfg.set_bits, reg_cfg.clear_bits);
|
||||
}
|
||||
|
||||
// now check that all are configured
|
||||
bool success = true;
|
||||
|
||||
for (const auto ®_cfg : _register_cfg) {
|
||||
if (!RegisterCheck(reg_cfg)) {
|
||||
success = false;
|
||||
}
|
||||
}
|
||||
|
||||
// accel: ±392 m/sec^2
|
||||
_px4_accel.set_range(392);
|
||||
_px4_accel.set_scale(392.f / 32'000.f); // 32,000 -> 392 m/sec^2
|
||||
|
||||
// Gyroscope measurement range
|
||||
// Range Identifier (RANG_MDL)
|
||||
const uint16_t RANG_MDL = RegisterRead(Register::RANG_MDL);
|
||||
|
||||
// sanity check RANG_MDL [1:0] Reserved, binary value = 11
|
||||
if (RANG_MDL & (Bit1 | Bit0)) {
|
||||
const uint16_t gyro_range = (RANG_MDL & (Bit3 | Bit2)) >> 2;
|
||||
|
||||
if (gyro_range == 0b11) {
|
||||
// 11 = ±2000°/sec (ADIS16507-3BMLZ)
|
||||
_px4_gyro.set_range(math::radians(2000.f));
|
||||
_px4_gyro.set_scale(math::radians(1.f / 10.f)); // scaling 10 LSB/°/sec -> rad/s per LSB
|
||||
|
||||
} else if (gyro_range == 0b01) {
|
||||
// 01 = ±500°/sec (ADIS16507-2BMLZ)
|
||||
_px4_gyro.set_range(math::radians(500.f));
|
||||
_px4_gyro.set_scale(math::radians(1.f / 40.f)); // scaling 40 LSB/°/sec -> rad/s per LSB
|
||||
|
||||
} else if (gyro_range == 0b00) {
|
||||
// 00 = ±125°/sec (ADIS16507-1BMLZ)
|
||||
_px4_gyro.set_range(math::radians(500.f));
|
||||
_px4_gyro.set_scale(math::radians(1.f / 40.f)); // scaling 40 LSB/°/sec -> rad/s per LSB
|
||||
}
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
|
||||
int ADIS16507::DataReadyInterruptCallback(int irq, void *context, void *arg)
|
||||
{
|
||||
static_cast<ADIS16507 *>(arg)->DataReady();
|
||||
return 0;
|
||||
}
|
||||
|
||||
void ADIS16507::DataReady()
|
||||
{
|
||||
_drdy_timestamp_sample.store(hrt_absolute_time());
|
||||
ScheduleNow();
|
||||
}
|
||||
|
||||
bool ADIS16507::DataReadyInterruptConfigure()
|
||||
{
|
||||
if (_drdy_gpio == 0) {
|
||||
return false;
|
||||
}
|
||||
|
||||
// Setup data ready on falling edge
|
||||
return px4_arch_gpiosetevent(_drdy_gpio, false, true, false, &DataReadyInterruptCallback, this) == 0;
|
||||
}
|
||||
|
||||
bool ADIS16507::DataReadyInterruptDisable()
|
||||
{
|
||||
if (_drdy_gpio == 0) {
|
||||
return false;
|
||||
}
|
||||
|
||||
return px4_arch_gpiosetevent(_drdy_gpio, false, false, false, nullptr, nullptr) == 0;
|
||||
}
|
||||
|
||||
bool ADIS16507::RegisterCheck(const register_config_t ®_cfg)
|
||||
{
|
||||
bool success = true;
|
||||
|
||||
const uint16_t reg_value = RegisterRead(reg_cfg.reg);
|
||||
|
||||
if (reg_cfg.set_bits && ((reg_value & reg_cfg.set_bits) != reg_cfg.set_bits)) {
|
||||
PX4_DEBUG("0x%02hhX: 0x%02hhX (0x%02hhX not set)", (uint8_t)reg_cfg.reg, reg_value, reg_cfg.set_bits);
|
||||
success = false;
|
||||
}
|
||||
|
||||
if (reg_cfg.clear_bits && ((reg_value & reg_cfg.clear_bits) != 0)) {
|
||||
PX4_DEBUG("0x%02hhX: 0x%02hhX (0x%02hhX not cleared)", (uint8_t)reg_cfg.reg, reg_value, reg_cfg.clear_bits);
|
||||
success = false;
|
||||
}
|
||||
|
||||
return success;
|
||||
}
|
||||
|
||||
uint16_t ADIS16507::RegisterRead(Register reg)
|
||||
{
|
||||
set_frequency(SPI_SPEED);
|
||||
|
||||
uint16_t cmd[1];
|
||||
cmd[0] = (static_cast<uint16_t>(reg) << 8);
|
||||
|
||||
transferhword(cmd, nullptr, 1);
|
||||
px4_udelay(SPI_STALL_PERIOD);
|
||||
transferhword(nullptr, cmd, 1);
|
||||
|
||||
return cmd[0];
|
||||
}
|
||||
|
||||
void ADIS16507::RegisterWrite(Register reg, uint16_t value)
|
||||
{
|
||||
set_frequency(SPI_SPEED);
|
||||
|
||||
uint16_t cmd[2];
|
||||
cmd[0] = (((static_cast<uint16_t>(reg)) | DIR_WRITE) << 8) | ((0x00FF & value));
|
||||
cmd[1] = (((static_cast<uint16_t>(reg) + 1) | DIR_WRITE) << 8) | ((0xFF00 & value) >> 8);
|
||||
|
||||
transferhword(cmd, nullptr, 1);
|
||||
px4_udelay(SPI_STALL_PERIOD);
|
||||
transferhword(cmd + 1, nullptr, 1);
|
||||
}
|
||||
|
||||
void ADIS16507::RegisterSetAndClearBits(Register reg, uint16_t setbits, uint16_t clearbits)
|
||||
{
|
||||
const uint16_t orig_val = RegisterRead(reg);
|
||||
|
||||
uint16_t val = (orig_val & ~clearbits) | setbits;
|
||||
|
||||
if (orig_val != val) {
|
||||
RegisterWrite(reg, val);
|
||||
}
|
||||
}
|
||||
129
src/drivers/imu/analog_devices/adis16507/ADIS16507.hpp
Normal file
129
src/drivers/imu/analog_devices/adis16507/ADIS16507.hpp
Normal file
@ -0,0 +1,129 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2022 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file ADIS16507.hpp
|
||||
*
|
||||
* Driver for the Analog Devices ADIS16507 connected via SPI.
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "Analog_Devices_ADIS16507_registers.hpp"
|
||||
|
||||
#include <drivers/drv_hrt.h>
|
||||
#include <lib/drivers/accelerometer/PX4Accelerometer.hpp>
|
||||
#include <lib/drivers/device/spi.h>
|
||||
#include <lib/drivers/gyroscope/PX4Gyroscope.hpp>
|
||||
#include <lib/geo/geo.h>
|
||||
#include <lib/perf/perf_counter.h>
|
||||
#include <px4_platform_common/atomic.h>
|
||||
#include <px4_platform_common/i2c_spi_buses.h>
|
||||
|
||||
using namespace Analog_Devices_ADIS16507;
|
||||
|
||||
class ADIS16507 : public device::SPI, public I2CSPIDriver<ADIS16507>
|
||||
{
|
||||
public:
|
||||
ADIS16507(const I2CSPIDriverConfig &config);
|
||||
~ADIS16507() override;
|
||||
|
||||
static void print_usage();
|
||||
|
||||
void RunImpl();
|
||||
|
||||
int init() override;
|
||||
void print_status() override;
|
||||
|
||||
private:
|
||||
void exit_and_cleanup() override;
|
||||
|
||||
struct register_config_t {
|
||||
Register reg;
|
||||
uint16_t set_bits{0};
|
||||
uint16_t clear_bits{0};
|
||||
};
|
||||
|
||||
int probe() override;
|
||||
|
||||
bool Reset();
|
||||
|
||||
bool Configure();
|
||||
|
||||
static int DataReadyInterruptCallback(int irq, void *context, void *arg);
|
||||
void DataReady();
|
||||
bool DataReadyInterruptConfigure();
|
||||
bool DataReadyInterruptDisable();
|
||||
|
||||
bool RegisterCheck(const register_config_t ®_cfg);
|
||||
|
||||
uint16_t RegisterRead(Register reg);
|
||||
void RegisterWrite(Register reg, uint16_t value);
|
||||
void RegisterSetAndClearBits(Register reg, uint16_t setbits, uint16_t clearbits);
|
||||
|
||||
const spi_drdy_gpio_t _drdy_gpio;
|
||||
|
||||
PX4Accelerometer _px4_accel;
|
||||
PX4Gyroscope _px4_gyro;
|
||||
|
||||
perf_counter_t _reset_perf{perf_alloc(PC_COUNT, MODULE_NAME": reset")};
|
||||
perf_counter_t _bad_register_perf{perf_alloc(PC_COUNT, MODULE_NAME": bad register")};
|
||||
perf_counter_t _bad_transfer_perf{perf_alloc(PC_COUNT, MODULE_NAME": bad transfer")};
|
||||
perf_counter_t _perf_crc_bad{perf_counter_t(perf_alloc(PC_COUNT, MODULE_NAME": CRC16 bad"))};
|
||||
perf_counter_t _drdy_missed_perf{nullptr};
|
||||
|
||||
hrt_abstime _reset_timestamp{0};
|
||||
hrt_abstime _last_config_check_timestamp{0};
|
||||
int _failure_count{0};
|
||||
|
||||
px4::atomic<hrt_abstime> _drdy_timestamp_sample{0};
|
||||
bool _data_ready_interrupt_enabled{false};
|
||||
|
||||
bool _self_test_passed{false};
|
||||
|
||||
enum class STATE : uint8_t {
|
||||
RESET,
|
||||
WAIT_FOR_RESET,
|
||||
SELF_TEST_CHECK,
|
||||
CONFIGURE,
|
||||
READ,
|
||||
} _state{STATE::RESET};
|
||||
|
||||
uint8_t _checked_register{0};
|
||||
static constexpr uint8_t size_register_cfg{1};
|
||||
register_config_t _register_cfg[size_register_cfg] {
|
||||
// Register | Set bits, Clear bits
|
||||
{ Register::MSC_CTRL, 0, MSC_CTRL_BIT::DR_polarity },
|
||||
};
|
||||
};
|
||||
@ -0,0 +1,135 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2022 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/**
|
||||
* @file Analog_Devices_ADIS16507_registers.hpp
|
||||
*
|
||||
* Analog Devices ADIS16507 registers.
|
||||
*
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <cstdint>
|
||||
|
||||
// TODO: move to a central header
|
||||
static constexpr uint16_t Bit0 = (1 << 0);
|
||||
static constexpr uint16_t Bit1 = (1 << 1);
|
||||
static constexpr uint16_t Bit2 = (1 << 2);
|
||||
static constexpr uint16_t Bit3 = (1 << 3);
|
||||
static constexpr uint16_t Bit4 = (1 << 4);
|
||||
static constexpr uint16_t Bit5 = (1 << 5);
|
||||
static constexpr uint16_t Bit6 = (1 << 6);
|
||||
static constexpr uint16_t Bit7 = (1 << 7);
|
||||
static constexpr uint16_t Bit8 = (1 << 8);
|
||||
static constexpr uint16_t Bit9 = (1 << 9);
|
||||
static constexpr uint16_t Bit10 = (1 << 10);
|
||||
static constexpr uint16_t Bit11 = (1 << 11);
|
||||
static constexpr uint16_t Bit12 = (1 << 12);
|
||||
static constexpr uint16_t Bit13 = (1 << 13);
|
||||
static constexpr uint16_t Bit14 = (1 << 14);
|
||||
static constexpr uint16_t Bit15 = (1 << 15);
|
||||
|
||||
namespace Analog_Devices_ADIS16507
|
||||
{
|
||||
static constexpr uint32_t SPI_SPEED = 2 * 1000 * 1000; // 2 MHz SPI serial interface
|
||||
static constexpr uint32_t SPI_SPEED_BURST = 1 * 1000 * 1000; // 1 MHz SPI serial interface for burst read
|
||||
|
||||
static constexpr uint32_t SPI_STALL_PERIOD = 16; // 16 us Stall period between data
|
||||
|
||||
static constexpr uint16_t DIR_WRITE = 0x80;
|
||||
|
||||
static constexpr uint16_t Product_identification = 0x407B;
|
||||
|
||||
static constexpr uint32_t SAMPLE_INTERVAL_US = 500; // 2000 Hz
|
||||
|
||||
enum class Register : uint16_t {
|
||||
DIAG_STAT = 0x02,
|
||||
|
||||
FILT_CTRL = 0x5C,
|
||||
|
||||
RANG_MDL = 0x5E,
|
||||
|
||||
MSC_CTRL = 0x60,
|
||||
|
||||
GLOB_CMD = 0x68,
|
||||
|
||||
FIRM_REV = 0x6C, // Identification, firmware revision
|
||||
FIRM_DM = 0x6E, // Identification, date code, day and month
|
||||
FIRM_Y = 0x70, // Identification, date code, year
|
||||
PROD_ID = 0x72, // Identification, part number
|
||||
SERIAL_NUM = 0x74, // Identification, serial number
|
||||
|
||||
FLSHCNT_LOW = 0x7C, // Output, flash memory write cycle counter, lower word
|
||||
FLSHCNT_HIGH = 0x7E, // Output, flash memory write cycle counter, upper word
|
||||
};
|
||||
|
||||
// DIAG_STAT
|
||||
enum DIAG_STAT_BIT : uint16_t {
|
||||
Accelerometer_failure = Bit10, // A 1 indicates failure of the accelerometer at the conclusion of the self test
|
||||
Gyro_2_failure = Bit9, // A 1 indicates failure of Gyro 2 at the conclusion of the self test
|
||||
Gyro_1_failure = Bit8, // A 1 indicates failure of Gyro 1 at the conclusion of the self test
|
||||
Clock_error = Bit7, // A 1 indicates that the internal data sampling clock
|
||||
Memory_failure = Bit6, // A 1 indicates a failure in the flash memory test
|
||||
Sensor_failure = Bit5, // A 1 indicates failure of at least one sensor, at the conclusion of the self test
|
||||
Standby_mode = Bit4, // A 1 indicates that the voltage across VDD and GND is <2.8 V, which causes data processing to stop
|
||||
SPI_communication_error = Bit3, // A 1 indicates that the total number of SCLK cycles is not equal to an integer multiple of 16
|
||||
Flash_memory_update_failure = Bit2, // A 1 indicates that the most recent flash memory update failed
|
||||
Data_path_overrun = Bit1, // A 1 indicates that one of the data paths have experienced an overrun condition
|
||||
};
|
||||
|
||||
// FILT_CTRL
|
||||
enum FILT_CTRL_BIT : uint16_t {
|
||||
|
||||
};
|
||||
|
||||
// MSC_CTRL
|
||||
enum MSC_CTRL_BIT : uint16_t {
|
||||
BURST32 = Bit9, // 32-bit burst enable bit
|
||||
|
||||
GYRO_COMP = Bit7, // Linear acceleration compensation for gyroscopes
|
||||
|
||||
DR_polarity = Bit0, // 1 = active high when data is valid
|
||||
};
|
||||
|
||||
// GLOB_CMD
|
||||
enum GLOB_CMD_BIT : uint16_t {
|
||||
Software_reset = Bit7,
|
||||
|
||||
Flash_memory_test = Bit4,
|
||||
|
||||
Sensor_self_test = Bit2,
|
||||
};
|
||||
|
||||
|
||||
} // namespace Analog_Devices_ADIS16507
|
||||
@ -1,6 +1,6 @@
|
||||
############################################################################
|
||||
#
|
||||
# Copyright (c) 2021 PX4 Development Team. All rights reserved.
|
||||
# Copyright (c) 2022 PX4 Development Team. All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
@ -31,5 +31,17 @@
|
||||
#
|
||||
############################################################################
|
||||
|
||||
add_subdirectory(adis16448)
|
||||
add_subdirectory(adis16470)
|
||||
px4_add_module(
|
||||
MODULE drivers__imu__analog_devices__adis16507
|
||||
MAIN adis16507
|
||||
COMPILE_FLAGS
|
||||
SRCS
|
||||
ADIS16507.cpp
|
||||
ADIS16507.hpp
|
||||
adis16507_main.cpp
|
||||
Analog_Devices_ADIS16507_registers.hpp
|
||||
DEPENDS
|
||||
drivers_accelerometer
|
||||
drivers_gyroscope
|
||||
px4_work_queue
|
||||
)
|
||||
5
src/drivers/imu/analog_devices/adis16507/Kconfig
Normal file
5
src/drivers/imu/analog_devices/adis16507/Kconfig
Normal file
@ -0,0 +1,5 @@
|
||||
menuconfig DRIVERS_IMU_ANALOG_DEVICES_ADIS16507
|
||||
bool "ADIS16507"
|
||||
default n
|
||||
---help---
|
||||
Enable support for analog_devices ADIS16507
|
||||
87
src/drivers/imu/analog_devices/adis16507/adis16507_main.cpp
Normal file
87
src/drivers/imu/analog_devices/adis16507/adis16507_main.cpp
Normal file
@ -0,0 +1,87 @@
|
||||
/****************************************************************************
|
||||
*
|
||||
* Copyright (c) 2022 PX4 Development Team. All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name PX4 nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#include "ADIS16507.hpp"
|
||||
|
||||
#include <px4_platform_common/getopt.h>
|
||||
#include <px4_platform_common/module.h>
|
||||
|
||||
void ADIS16507::print_usage()
|
||||
{
|
||||
PRINT_MODULE_USAGE_NAME("adis16507", "driver");
|
||||
PRINT_MODULE_USAGE_SUBCATEGORY("imu");
|
||||
PRINT_MODULE_USAGE_COMMAND("start");
|
||||
PRINT_MODULE_USAGE_PARAMS_I2C_SPI_DRIVER(false, true);
|
||||
PRINT_MODULE_USAGE_PARAM_INT('R', 0, 0, 35, "Rotation", true);
|
||||
PRINT_MODULE_USAGE_DEFAULT_COMMANDS();
|
||||
}
|
||||
|
||||
extern "C" int adis16507_main(int argc, char *argv[])
|
||||
{
|
||||
int ch;
|
||||
using ThisDriver = ADIS16507;
|
||||
BusCLIArguments cli{false, true};
|
||||
cli.default_spi_frequency = SPI_SPEED;
|
||||
|
||||
while ((ch = cli.getOpt(argc, argv, "R:")) != EOF) {
|
||||
switch (ch) {
|
||||
case 'R':
|
||||
cli.rotation = (enum Rotation)atoi(cli.optArg());
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
const char *verb = cli.optArg();
|
||||
|
||||
if (!verb) {
|
||||
ThisDriver::print_usage();
|
||||
return -1;
|
||||
}
|
||||
|
||||
BusInstanceIterator iterator(MODULE_NAME, cli, DRV_IMU_DEVTYPE_ADIS16507);
|
||||
|
||||
if (!strcmp(verb, "start")) {
|
||||
return ThisDriver::module_start(cli, iterator);
|
||||
}
|
||||
|
||||
if (!strcmp(verb, "stop")) {
|
||||
return ThisDriver::module_stop(iterator);
|
||||
}
|
||||
|
||||
if (!strcmp(verb, "status")) {
|
||||
return ThisDriver::module_status(iterator);
|
||||
}
|
||||
|
||||
ThisDriver::print_usage();
|
||||
return -1;
|
||||
}
|
||||
Loading…
x
Reference in New Issue
Block a user